of 12

plumbing

Published on May 2016 | Categories: Types, School Work | Downloads: 25 | Comments: 0
185 views

estimate

Comments

Content


AMOUNT IN INDIAN
RUPEES
PLUMBING WORKS
SUB HEAD -I INTERNAL WORKS
WATER SUPPLY & SANITARY 1892616
SUB HEAD II EXTERNAL WORKS
A WATER SUPPLY 412058
B SEWAGE 347503
C RECYCLED WATER SUPPLY WORK 256250
D STORM WATER DRAINS & RECHARGE PITS 1003643
E PACKAGE TYPE SEWAGE TREATMENT PLANT 50 KLD CAP OF
HICLEAR OF POORVI FARMTECH OR NGPSTP OF
IONEXCHANGE OR CHEMPAC FBBR SYSTEM INCLUDING COST
OF CIVIL WORKS
1400000
SUPPLYING AND ERECTING DEPLOYABLE SMC PANAL
STORAGE WATER TANK OF 75KLD CAP(6.0MX5.0MX2.5M SIZE) 700000
SUPPLYING AND ERECTING WATER SOFTENER SUITABLE FOR
A FLOW RATE OF 10CUM/HRS AND 500PPM HARDNESS 120000
F PUMPS- GRUNDFOS MAKE
I WATER SUPPLY PUMP-MODEL H2K 2XCR 10-4 ( THREE PHASE)
WITH 170 LTS CAP PRESSURE TANK
-1SYSTEM 400000
II RECYCLED WATER SUPPLY PUMP FOR LAWN -MODEL CHV2-
60HYDERO DOME SINGLE PHASE WITH 60 LTS CAP PRESSURE
TANK-1NOS 135512
TOTAL 6667582
RUPEES SIXTYSIX LAKHS SIXTY SEVEN THOUSAND FIVE HUNDERED AND EIGHTY TWO ONLY
v raju
chartered engineer
for v raju & associates
S U M M A R Y
PROJECT LOCATION - HILL COUNTY, HYDERABAD
PROJECT - MAYTAS INCUBATION CENTRE
TITLE -ABSTRACT ESTIMATE FOR INTERNAL & EXTERNAL PLUMBING WORKS
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
SUB HEAD - I WATER SUPPLY & SANITARY WORKS (INTERNAL )
IWS 1 Providing and fixing European water closet suit Comprising
of:
a) Glazed vitreous chinaware European water closet of
PARRYWARE CASCADE DUEL FLUSH 3 Ltr / 6 Ltr make
or any other approved make with trap as mentioned above,
conforming to IS 2556-Part II fixed to floor with necessary
teak wood plugs. C.P. Brass screws No.8x37 etc.
b) Glazed vitreous Chinaware matching Low Level flushing
cistern suitable for water closet bearing ISI mark with all
internal fittings,mounted suitably over closet with necessary
fixtures.
c) 15mmheavy quality flexible PVC inlet connection with
C.P.brass hexagonal check nuts with washers at both ends.
d) Matching poly propelene seat and cover of approved
PARRY WARE product code: 8012 or equilent make and
colour with Unbreakable Plastic Hinges conforming to
suitable for water closet.
e) 15MM brass Angle stop cock (JAQUAR, Code No. 21053)
or equivalent conforming to IS 781 of approved make with
a minimum weight of 400 grms. on the inlet to the cistern
complete all as specified above with approved fittings.
A SUPPLY
i) WHITE COLOUR 42 Nos. 5548.45 233034.90
ii) SPECIAL COLOUR RO Nos. 7255.00
B Charges for installation 42 Nos. 500.00 21000.00
C Providing and fixing CP metro pole flush wall concealed
type with cover plate 40mm size (Jaquare code - 1091)
42 Nos. 2100.00 88200.00
IWS 2 Providing and fixing Indian style water closet suite
(Orissapan with CP bend) comprising of :
a) Indian water closet glazed vitreous chinaware Orissapan
630mm of PARRYWARE or equivalent approved make of
size 510 x 400mm with trap
PROJECT LOCATION - HILL COUNTY, HYDERABAD
ESTIMATE FOR WATER SUPPLY, SEWAGE DISPOSAL & STORM WATER DRAINAGE WORKS
PROJECT - MAYTAS INCUBATION CENTRE
Page 2 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
b) 10 Litres capacity low level cistern of vacuum operated
siphon made out of ceramic of PARRYWARE or
equivalent make made of corrosive resistant materials
fixed to wall with necessary brackets, and screw and plugs.
c) 32mm CP Flush pipe of heavy quality with brass union nut
of required length to suit the cistern to the W.C. inlet and
making necessary connections, concealed in the wall etc.
d) 15mm size heavy quality flexible P.V.C. Inlet pipe
connection with C.P. brass check nuts with washers at both
ends.
e) 15mm C.P. ANGLE STOP COCK (JAQUAR Code No. 053
) or equivalent conforming to IS 781 of approved make
with a minimum weight of 400 grms on the inlet to the
cistern complete all specified and directed with approved
fittings.
A SUPPLY
i) WHITE 1 Nos. 2526.45 2526.45
ii) SPECIAL COLOUR RO Nos. 3400.00
B Charges for installation 1 Nos. 500.00 500.00
IWS 3 Providing and fixing Wash Hand Basin Oval type
comprising of;
a) Glazed vitreous china above counter oval shaped wash
basin of PARRYWARE CASCADE Code: 0426 or
equivalent conforming to IS : 2556 part - IV with single tap
hole and bearing supported on a pair of painted C.I.
Brackets conforming to IS 775.
b) One 15 mm brasssingle lever basin mixture (JAQUAR,
Code No. 21011) or equivalent approved make with
minimmum weight 577 grms conforming to IS 1795
c) One 15mm heavy quality flexible PVC inlet pipe connection
with C.P.brass hexagonal check nuts with washers at both
ends.
d) One 15mm Brass Angle Stop Cock (JAQUAR, Code No.
21053) or equivalent of approved make conforming to
IS781 with a minimum weight of 400 grms on the inlet to
the basin .
e) One 32mm heavy quality CP brass waste Coupling
(JAQUAR Code No. 705) or equivalent with rubber plug
and C.P.Chain.
f) One 32mm C.P.Brass Bottle Trap with extension piece and
wall flanges etc.
Page 3 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
g) One 32mm medium quality G.I.waste pipe with specials
from extension piece of the bottle trap to the floor trap,
length not exceeding 1mtr.concealed in the wall.
h) One no.40mm GI bend of 40mm dia 250mm long GI pipe
connecting waste pipe to floor trap.
A SUPPLY
i) WHITE 40 Nos. 6260.00 250400.00
ii) SPECIAL COLOUR RO Nos. 7600.00
B Charges for installation 40 Nos. 500.00 20000.00
C Providing CP wash basin sensor tap (Jaquar Code - 51011)
40 Nos. 12650.00 506000.00
IWS 4a) Providing and fixing approved make glazed large flat back
Urinal of PARRYWARE MAGNUM (Special Colour) or
equivalent of size 635 x 395 x 420mm with 40mm dia C.P.
waste coupling with dome type grating,40mm C.P.bottle
trap with extension pipe, C.P.concealed stop cock, C.P.wall
flanges C.P.Spreader etc.complete as directed.
RO Nos. 3985.00
b) Providing and fixing glazed large flat back Urinal of
PARRYWARE INTEGRATED EFS Code No. 8097 (Special
Colour) or equivalent with matching urinal in one sleek
compact unit with 40mm dia C.P. waste coupling with dome
type grating,40mm C.P.bottle trap with extension pipe,
C.P.wall flanges C.P.Spreader etc.complete as
directed.(Runs on 230V AC and shall be provided with
battery back up as per manufacture specifications)
30 Nos. 12250.00 367500.00
c) Providing and fixing of auto 5ltrs cistern for flat back Urinal
of PARRYWARE (Special Colour) or equivalent with
necessary fixtures, piping with special connect to the
urinals etc., complete.
RO Nos. 750.00
IWS 5 A Providing and fixing Kitchen sink with drain board
comprising of;
a) Best quality stainless steel Kitchen Sink of approved make
of size 600X450x250mm and drain board of size 550X450
mm conforming to IS: 771 supported on painted CI
brackets conforming to IS: 779.
b) One 40 mm heavy quality brass waste coupling
c) One 32 mm PVC waste pipe bent to shape length not
exceeding 1m. To discharge into the floor trap through GI
elbow.
Page 4 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
d) One 40 mm GI medium class pipe 250mm long connecting
elbow to floor trap. Complete all as specified with approved
fittings.
1 Nos. 6081.00 6081.00
IWS 5 B Providing and fixing Kitchen sink mixture Swinging Casted
Spout ( table mounted model) with 450 mmcopper pipes
and brass nuts( JAQUAR, Code No. 309A
1 Nos. 1825.00 1825.00
IWS 6 Providing and fixing in position 150mm x150mm recessed
type toilet paper roll holder (JAQUAR, Code No. 21751) or
equivalent of approved make with necessary CP screws
and washers fixed to wall, fixing and making good the
surface etc; complete all as specified and directed.
A SUPPLY
i) WHITE 42 Nos. 700.00 29400.00
ii) SPECIAL COLOUR RO Nos. 1100.00
B Charges for installation 42 Nos. 125.00 5250.00
IWS 7 Providing and fixing in position 150mmx150mm recess type
CP soap dish (JAQUAR, Code No. 1131) or equivalent of
approved make with necessary CP screws and washers
fixed into the wall including cutting the wall, fixing and
making good the surface etc. Complete all as specified.
30 Nos. 675.00 20250.00
IWS 8 Providing and fixing in position best quality approved make
mirror (Belgium glass ) of ht 550mm mounted on 6 mm
thick plain asbestos sheet backing with required No. of CP
brass cap screws and washers fixed to wall with necessary
plugs and with 50mm x 25mm T.W. beading with design
alround etc., complete all as specified and directed.
a) Upto 1mt in length 40 R.M 2195.00 87800.00
b) 1mt to 2mts in length 1 R.M 2320.00 2320.00
c) Above 2mts in length R.O R.M 2440.00
IWS 9 . Providing and fixing in position approved make 15mm n.b.
CP brass Short Body bib tap (JAQUAR, Code No. 037) or
equivalent conforming to IS: 781 with a minimum weight of
400 gms.
42 Nos. 465.00 19530.00
IWS 10 Providing and fixing in position approved make of 15mm
n.b. CP brass sink cock (JAQUAR, Code No. 359) or
equivalent conforming to IS Standard.
1 Nos. 975.00 975.00
Page 5 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
IWS 11 Providing and fixing in position best approved quality and
type towel ring ( JAQUAR, Code No. 21721) or equivalent
with a pair of bracket or flanges fixed to wall and necessary
screws, plugs, etc. all as specified and as directed .
30 Nos. 690.00 20700.00
IWS 12 Providing and fixing in position approved best Indian make
heavy quality screw down gun metal gate valves with hand
wheel of following sizes conforming to IS:778 and bearing
ISI mark including testing. Making good the leakages
etc.complete
a) 20mm n.b. 2 Nos. 432.05 864.10
b) 25mm n.b. 10 Nos. 532.50 5325.00
d) 40mm n.b. (3.65 kg/mt) 1 R.M 1520.15 1520.15
IWS 13 Providing, laying, jointing, fixing, testing painting,
commissioning GI pipe medium grade conforming to
IS:1239 including cost of GI special cutting the pipe to the
required lengths, threading, jointing the pipes, chasing the
walls and floors, making the holes, clamping to walls using
wooden spacers or clamps and restoring the same to the
original conditions, necessary excavation, testing, refilling
etc. complete all as specified and directed.
a) 15 mm n.b. ( 1.23 kg/mt) 30 R.M 97.85 2935.50
b) 20mm n.b. (1.59 kg/mt) 150 R.M 147.20 22080.00
c) 25mm n.b. (2.46 kg/mt) 70 R.M 200.45 14031.50
d) 32mm n.b. (3.17 kg/mt) R.O. R.M 254.60
e) 40mm n.b. (3.65 kg/mt) 10 R.M 284.05 2840.50
IWS 18 B
PE-AL-PE Composite Pressure Pipes & Fittings
(OPTIONAL ITEM)
Page 6 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
I) Providing & fixing Polyethelene-Aluminum-
Polyethelene (PE-AL-PE) Composite Pressure Pipes
conforming to IS 15450 duly ' ISI ' marked, U.V.
stabilised with carbon black for hot & cold water
supply, capable to withstand temperature upto 80º C
including all special composite fittings (engineering
plastic blend and brass inserts wherever required)
e.g. elbows, tees, reducers, couplers & connectors
etc. with clamps at 1 metre spacing, cutting & making
good the walls etc. including testing complete as
required. (Internal Work)
1.1 1216 (16 mm OD) pipe R.O R.M 134.00
1.2 1620 (20 mm OD) pipe R.O R.M 165.00
1.3 2025 (25 mm OD) pipe R.O R.M 207.00
1.4 2532 (32 mm OD) pipe R.O R.M 278.00
1.5 3240 (40 mm OD) pipe R.O R.M 365.00
1.6 4050 (50 mm OD) pipe R.O R.M 465.00
IWS 17 Providing laying and fixing in position under floor, against
wall in chases sand cast iron soil pipes and specials
conforming to IS:1729 including cutting the pipes to the
required lengths, making joint to CI soil pipe and specials
with Lead Joints labour for packing curing ,painting &testing
the joint to the required pressure and rectifying the
leakages if any etc. complete as per specifications
(specials at junctions of lateral pipe and vertical stack must
have access door for inspection ).
a) 75mm dia 115 R.M 465.75 53561.25
b) 100mm dia 100 R.M 560.70 56070.00
c) 50 mm dia C.I.antisyphonage R.O. RM 365.95
IWS 19 Providing and fixing C.I.Floor trap of size 75x110 mm,
heavy duty with C.P.gratting.conforming to I.S.standards. 66 Nos. 456.00 30096.00
Supplying and fixing heavy duty electrically operated
geysors suitable for hydero pnuematic pressure boosting
pumping system including providing two nos CP angle
valves, heavy duty flexible PVC and vent pipe of RECOLD
brand or equivlent for 25 ltrs cap
2 Nos. 10000.00 20000.00
TOTAL 1892616.35
Pipes exposed on wall
Page 7 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
A WATER SUPPLY
EWS1 Providing, laying, jointing, fixing, testing, painting, commissioning GI pipe
medium grade conforming to IS 1239 including cost of GI specials cutting
the pipes to the required lengths, threading, jointing the pipes, chasing
the walls and floors, making the holes, clamping to walls using wooden
spacers or clamps and restoring the same to the original conditions,
necessary excavation, testing, refilling etc., complete all as specified and
directed.
a) 25mm n.b. 50 R.M 200.45 10022.5
b) 40mm n.b. 40 R.M 250 10000
c) 50mm n.b. 75 R.M 310 23250
d) 65mm n.b. 100 R.M 470 47000
e) 80mm n.b. 72 R.M 650 46800
EWS 2 Providing and fixing in position approved best Indian make heavy quality
screw down gun metal gate valves with hand wheel of following sizes
conforming to IS 778 and bearing ISI mark including testing, making good
the leakages etc., complete
a) 25mm n.b. 4 Nos. 532.5 2130
b) 40mm n.b. 4 Nos. 983 3932
c) 50mm n.b. 2 Nos. 1575 3150
d) 65mm n.b. 4 Nos. 2706 10824
e) 80mm n.b. 4 Nos. 3830 15320
EWS 3 supply and fixing of water meter of approved brand of manufacture
having stainless steel gears and fixed inside a masonry valve chamber
,providing and fixing of lockable type CI frame and cover.the rate
includes the cost of masonary chamber of minimum size 900mmx600mm
with internal and external plastering etc . to accomodate 1no 50mm dia
ball valve and water meter complete as per specification ( weight of CI
cover shall not be less than 110kgs
1 Nos. 6500 6500
EWS 4 supplying ,installation testing and commissioning of approved make
pressure reducing station on water lines with by pass arrangement. The
system shall include pressure reducing valves, bronze isolation valves,
up stream and down stream pressure guages Y strainers by pass ball
valves unions & piping arrangement
i) 40 mm n b 2 Nos. 5000 10000
ii)25mm n b 4 Nos. 3500 14000
SUB HEAD II EXTERNAL WORKS
Page 8 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
EWS 5 supplying ,installation testing and commissioning of approved make CI
non return valves conforming to IS: 778 with necessary companion
flanges neoprene gaskets (10kg/sqcm rating) nuts and bolts including all
the accessaries to complete the work . The system shall include pressure
reducing valves, bronze isolation valves, up stream and down stream
pressure guages Y strainers by pass ball valves unions & piping
arrangement
i) 80mm n b 1 Nos. 3307.50 3307.5
ii)65mm n b 1 Nos. 2756.00 2756
EWS6 Construction of valve chamber of size 600x600mm, 750mm deep
comprising of 230mm thick brick walls using locally available best quality
table moulded bricks with min. compresive strength of 35Kg per Sqcm in
C.M. 1:5 over a bed of 150mm thick PCC 1:4:8 using 40mm metal with
75mm projections alround beyond the masonry faces, plastered with CM
1:3 mixed with approved water proofing compound as per manufacturer's
specification, 12mm thick on internal, external top surfaces and internal
and top exposed surfaces finished smooth with a floating coat of neat
cement providing and fixing painted light duty double seal CI frame and
cover of size 600 x 450mm weighing not less than 52 kgs conforming to
IS: 1726 with locking arrangements, fixing the frame in RCC 1:2:4
including cost of necessary steel reinforcement, fabricating, formwork,
curing etc., complete all as specified and directed.
NOTE: CC 1:2:4 in the above item is by using 20mm graded granite
aggregate obtained from approved quarry.
38 Nos. 3950 150100
EWS7 supplying and fixing of Bronze ball valves as per IS :1703-1977,with
necessary nuts and bolts including all the accessessories to complete the
work
i) 40 mm nb 2 Nos. 1083.00 2166
ii) 25 mm nb 4 Nos. 600.00 2400
ii) 20 mm nb 14 Nos. 600.00 8400
EWS8 Making necessary connection from the existing corporation water supply
which is available outside the campus with necessary works and required
specials etc complete
1 job 40000 40000
TOTAL - A 412058.00
B SEWAGE
ESW 1 Providing and laying best quality salt glazed stoneware pipe of grade 'A'
and specials conforming to IS : 651 in trenches for all depths to correct
grade, level and alignment including jointing with hemp yarn and CM 1:1
including testing, making good the leakages all as specified and directed
a) 100mm dia 24 R.M 183 4392
b) 150mm dia 275 R.M 254 69850
c) 200mm dia 70 R.M 350 24500
Page 9 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
ESW 2 Construction of inspection chamber of internal clear dimension as
mentioned below in 230mm thick brick masonry using locally available
best quality table moulded brick with minimum compressive strength of
35kgs Sqcm. in CM 1:3 over a bed of 150mm thick 1:2:4 (20mm metal)
cement concrete, plastering with CM 1:2, 12mm thick on internal,
external, exposed top surfaces and internal finished smooth with a
floating coat of neat cement 1:2:4 plain cement concrete for benching,
channeling, providing and fixing precast RCC M15 frame and cover as
mentioned below including cost of necessary steel reinforcement as per
drg encasing sewer connections to chamber in PCC 1:2:4 etc., complete
all as specified and directed
NOTE: CC 1:2:4 item in the above item is by using 20mm size graded
granite aggregate obtained from approved quarry.
a) 600 x 600 x 600mm (with 600 x 600mm RCC frame & Cover) 8 Nos. 2345 18760
b) 600 x 600 x 750mm (with 600 x 600mm RCC frame & Cover) 1 Nos. 2710 2710
EWS 3 Providing and fixing in position best quality salt glazed stoneware gully
trap of size 100mm square with 100mm outlet conforming to IS 651
embedded in plain cement concrete 1;4:8 (20mm metal), providing&
fixing 100mm square CI grating on top of the trap all the above encased
in a chamber of 300 x 300mm built with 115mmthick brick masonry using
first class country bricks in CM 1:3 Over bed of CC 1;4:8 using 40mm
size
metal 100mm thick, plastering with CM 1:3 , 13mm thick inside, outside,
exposed top surface and internal and top exposed surfaces finished
smooth with a floating coat of neat cement ,providing and fixing CI frame
and cover of size 300x300mm weighing not less than 7kgs fixing the
frame and in PCC 1:2:4 using 20mm stone metal including painting the
frame and cover with 3 coat of anticorrosive black bitumastic painting etc;
complete all as specified and directed
18 Nos. 895.00 1087.40
EWS 4 Construction of grease trap chamber of internal clear dimension
450x450x760 in 230mm thick brick masonry using first class country
brick in CM 1:3 over a bed of 150 mm thick 1;2:4 cement concrete,
plastering with cm 1:2, 12mm thick on internal, external ,top surface and
inside and exposed top surfaces finished smooth with a floating coat of
neat cement, providing and fixing light single seal CI frame and cover of
size 450x450mm weighing not less than 25kgs conforming to IS :1726
cc 1:2 :4 for fixing the CI frame and cover, painting with 3 coats of
anticorrosive black bitumastic paint providing one SW TEE of 100mm ,on
the outlet, encasing sewer connections to chamber 1:2:4 etc; complete
all as specified and directed
2 Nos. 3014.60 6029.20
ESW 5a) Construction of manhole of internal clear dimension 800 x 800mm in
230mm thick brick masonry using 1st class country brick in CM 1:3 over
a bed of 150mm thick CC 1:2:4 plastering with C.M. 1:2 12mm thick on
internal, external surfaces and internal top exposed surfaces finished
smooth with floating coat of neat cement 1:2:4 plain cement concrete for
benching channeling, providing and fixing C.I frame and cover of size
600mm dia. including cost of necessary steel reinforcement as per
drawing, CI steps with 3 coats of anticorrosive black bitumastic painting
encasing of sewer connections to manhole with PCC 1:2:4 etc.,
complete all as specified and directed for depth not exceeding 0.75m
19 Nos. 6325 120175
b) Extra for construction of additional depth of manhole of size 800 x
800mm beyond the initial depth of 0.75m for brick work plastering,
providing CI steps, dewatering etc., complete (rate for Upto a max.
additional depth of 1m.)
10 Nos. 2000 20000
Page 10 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
ESW6 Construction of sewage collection well of 3.0m internal diameter and
2.50m depth in rcc including 6mmthick plastering rendering leak proof
andwith necessary earth work excavation completed work
1 job 80000 80000
TOTAL -B 347503.60
C RECYCLED WATER SUPPLY
RCWS 1 PE-AL-PE Composite Pressure Pipes & Fittings RECYCLED
WATER SUPPLY LINES FOR LAWN WATERING
Providing & fixing Polyethelene-Aluminum-Polyethelene (PE-AL-
PE) Composite Pressure Pipes conforming to IS 15450 duly ' ISI '
marked, U.V. stabilised with carbon black for hot & cold water
supply, capable to withstand temperature upto 80º C including all
special composite fittings (engineering plastic blend and brass
inserts wherever required) e.g. elbows, tees, reducers, couplers &
connectors etc. with tranching & refilling upto 1 metre depth
including testing complete as required. (External Work)
Pipe in trenches including excavation & refilling etc.
1.1 1216 (16 mm OD) pipe R.O. R.M 157.00
1.2 1620 (20 mm OD) pipe 20 R.M 186.00 3720
1.3 2025 (25 mm OD) pipe 60 R.M 226.00 13560
1.4 2532 (32 mm OD) pipe R.O. R.M 293.00
1.5 3240 (40 mm OD) pipe R.O. R.M 375.00
1.6 4050 (50 mm OD) pipe 500 R.M 478.00 239000
TOTAL -C 256280.00
D STORM WATER DRAINS & RECHARGE PITS
ST 1 Earth work excavation for foundations of buildings and depositing at site
with an initial lead of 50 Mts including all operational, incidental, labour
charges such as shoring sheeting, planking, strutting etc., complete for
finished item of work including dewatering, in mixture of gravel and soft
disintegrated rock like shales ordinary gravel stoney earth and earth
mixed with fair sized boulders
a) upto 1.5m depth below G.L 270.00 Cu.M 113.00 30510
ST 2 Refilling with useful available excavated earth (Excluding rock) in
trenches sides of foundations basement etc., with an initial lead, in layers
not exceeding 15 cm, consolidating each deposited layer by watering and
ramming including cost and conveyance of water to work site and all
operational, incidental labour charges etc., complete for finished item of
work
90.00 Cu.M 40 3600
PLAIN CEMENT CONCRETE
ST 3 Providing and laying cement concrete 1:4:8 using 40mm size
nominal/graded hard granite stone aggregate obtained from approved
quarry including compaction, finishing top surface to level, curing but
excluding cost of formwork etc., complete as per specifications. Mix
ratio specified is for (Cement: coarse sand: graded stone aggregate by
volume).
67.50 Cu.M 2140.00 144450
ST 4 P.C.C (1:3:6) 50mm thick wearing coat on drain bed with neat cement
finishing.
360.00 Sq.M 150 54000
Page 11 of 12
S.No. DESCRIPTION QTY UNIT RATE AMOUNT
STONE MASONRY
ST 5 Providing and constructing Stone masonry work using hard granite
stones with bond stones at every 0.50 Sqm of wall surface, in C.M.(1:6)
(Mix ratio specified is for cement: coarse sand) without pinning on face,
but including raking out joints, curing etc.,complete as per specifications,
drawings and as directed . (Rate to include cost of bond stones
wherever provided) in foundations plinth and wherever required.
a) R.R.masonry in C.M (1:6) above plinth level. 102.60 Cu.M 2008.00 206020.8
ST 6 Precast slabs with or without perforations. 33.75 Cu.M 4550 153562.5
PLASTERING & FINISHES
ST 7 Providing cement Plastering 20mm thick in 2 coats with a base coat of
16mm thick in CM 1:5 prop and top coat of 4mm thick in CM 1:3 prop.
with smooth/sponge finish including cost and conveyance of all
materials, labour charges, scaffolding charges lift charges, curing etc.,
complete for finished item of work as directed at all heights.
450.00 Sq.M 115.00 51750
ST 8 Strom water colloction chambers of min size 900mmx600mm in stone
masonry work with necessary plastering and covers( cost of cover shall
be paid separatly)
16.00 Nos. 3500 56000
ST9 Supplying and providing cast iron grating with panel of size 900 x 600mm
weighing about 118 Kgs conforming to IS standards and entry of ramps
in basement floor to allow the rain water to flow in to the drain.
50.00 R.M 4535 226750
ST10 RAIN WATER RECHARGE PITS WORK
constructing rain water recharge pits of size 1.20mx1.20m x2.00mdeep
by excavation of Pit and refilling of 40mmmetal ,20mmmetal and sand as
per drawing
16.00 Nos. 3500 56000
ST11 providing R.C.C NP2 class pipe drain from court yards to storm drain
under floors including necessary excavation refilling including
consolidation jointing in cement mortor etc- using 300 mm dia NP2
CLASS PIPE
60.00 Nos. 350 21000
TOTAL -D 1003643.3
TOTAL A+B+C+D 2019484.90
Page 12 of 12

Sponsor Documents


Recommended

No recommend documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close