67318600 Sentron PAC WinCC Prof En

Published on November 2019 | Categories: Documents | Downloads: 13 | Comments: 0 | Views: 229
of 25
Download PDF   Embed   Report

Comments

Content

Cover 

Faceplates for the Visualization of Sentron PAC Power Meters WinCC Professional Application Description February 2013

 Applications & Tools  Answers for industry. industry.

Siemens Industry Online Support This entry is taken from Siemens Industry Online Support. The following link takes you directly to the download page of this document: http://support.automation.s http://support.a utomation.siemens.com/WW iemens.com/WW/view/en/673 /view/en/67318600 18600

Caution: The functions and solutions described in this entry predominantly confine themselves to the realization of the automation task. Please also take into account that corresponding protective measures have to be taken in the context of Industrial Security when connecting your equipment to other parts of the plant, the enterprise network or the Internet. For more information, please refer to Entry ID 50203404. http://support.automation.si http://support.a utomation.siemens.com/WW emens.com/WW/view/en/502 /view/en/50203404 03404

Please also actively use our Technical Forum in Siemens Industry Online Support regarding this subject. Share your questions, suggestions or problems and discuss them with our strong forum community: http://www.siemens.com/forum-a http://www.siemen s.com/forum-applications pplications    d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

2

Sentron PAC Faceplates 1.0, Entry ID: 67318600

s

Task

1

Solution

2

Function Mechanisms of this Application

3

Configuration

4

Installation

5

Startup of the Application

6

Operation of the Application

7

Related Literature

8

History

9

Sentron PAC Faceplates WinCC Professional V11

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Sentron PAC Faceplates 1.0, Entry ID: 67318600

3

Warranty and Liability

Warranty and Liability Note

The Application Examples are not binding and do not claim to be complete regarding the circuits shown, equipping and any eventuality. The Application Examples do not represent customer-specific solutions. They are only intended to provide support for typical applications. You are responsible for ensuring that the described products are used correctly. These application examples do not relieve you of the responsibility to use safe practices in application, installation, operation and maintenance. When using these Application Examples, you recognize that we cannot be made liable for any damage/claims beyond the liability clause described. We reserve the right to make changes to these  Application Examples at any time without prior notice. If there are any deviations between the recommendations provided in these application examples and other Siemens publications – e.g. Catalogs – the contents of the other documents have priority.

We do not accept any liability for the information contained in this document.  Any claims against us – based on whatever legal reason – resulting from the use of the examples, information, programs, engineering and performance data etc., described in this Application Example shall be excluded. Such an exclusion shall not apply in the case of mandatory liability, e.g. under the German Product Liability  Act (“Produkthaftungsgesetz”), in case of intent, gross negligence, or injury of life, body or health, guarantee for the quality of a product, fraudulent concealment of a deficiency or breach of a condition which goes to the root of the contract (“wesentliche Vertragspflichten”). The damages for a breach of a substantial contractual obligation are, however, limited to the foreseeable damage, typical for the type of contract, except in the event of intent or gross negligence or injury to life, body or health. The above provisions do not imply a change of the burden of proof to your detriment.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

 Any form of duplication or distribution of these Application Examples or excerpts hereof is prohibited without the expressed consent of Siemens Industry Sector.

4

Sentron PAC Faceplates 1.0, Entry ID: 67318600

Table of Contents

Table of Contents Warranty and Liability .................................................................................................4 1

Task.....................................................................................................................6

2

Solution...............................................................................................................7 2.1 2.2 2.3

3

Function Mechanisms of this Application ....................................................10 3.1 3.2

"HMI data type" functionality ..............................................................11 Functionality of the "Sentron PAC" faceplate..................................... 12

4

Configuration ...................................................................................................16

5

Installation........................................................................................................17 5.1 5.2

6

7

Installation of the faceplate ................................................................17 Integration of the faceplate.................................................................18

Startup of the Application...............................................................................22 6.1 6.2

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Solution overview .................................................................................7 Description of the core functionality .....................................................8 Required hardware and software components .................................... 9

Preparation.........................................................................................22 Startup................................................................................................22

Operation of the Application ..........................................................................23 7.1 7.2

Overview ............................................................................................23 Displaying and operating the faceplate in runtime ............................. 24

8

Related Literature ............................................................................................25

9

History...............................................................................................................25

     

   t    h   g    i   r   y   p   o    C

Sentron PAC Faceplates 1.0, Entry ID: 67318600

5

1 Task

1

Task

Introduction The real-time visualization of energy data from the field level is a more and more frequent requirement for an industrial control system. It allows, for example, for viewing and monitoring the voltages, currents, and other energy-specific key figures of a consumer or plant part. In order to prevent additional engineering effort in the automation system (PLC), the power meter is directly connected with the control system. Overview of the automation task The figure below provides an overview of the automation task. Figure 1-1

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Description of the automation task The direct connection of the power meter allows direct visualization in the control station and – on request – also permanent archiving.

     

   t    h   g    i   r   y   p   o    C

6

Sentron PAC Faceplates 1.0, Entry ID: 67318600

2 Solution 2.1 Solution overview

2

Solution

2.1

Solution overview

Display The following figure displays the most important components of the solution: Figure 2-1

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Advantages This application offers you the following advantages: •

Low engineering effort due to the use of pre-configured faceplates.



Simple integration into existing systems and projects.



Cost-efficient option to transparently represent the energy flows.



Almost identical operation of the device and faceplate, therefore no additional training effort and fewer operating errors.

Delimitation This application does not include a description of •

the creation of faceplates with WinCC Professional V11.



the installation and configuration of Sentron PAC measuring devices.



the meaning of electrical key figures and measured values.

Basic knowledge of these topics is assumed.

Required knowledge Basic knowledge on WinCC Professional V11 and engineering with the TIA Portal is assumed.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

7

2 Solution 2.2 Description of the core functionality

2.2

Description of the core functionality

Overview and description of the user interface Figure 2-2

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

The faceplate supplied with this application example reproduces the design and operation of the measuring device.  Almost all functions that are reasonable for visualization were integrated. The following measured values can be displayed:

     

   t    h   g    i   r   y   p   o    C



Voltage PH-N



Voltage PH-PH



 

Current



Apparent power



Active power



Reactive power



Total of apparent, active, and reactive power



Power factor



Total power factor

 

8



Frequency



THD-R voltage



THD-R current

Sentron PAC Faceplates 1.0, Entry ID: 67318600

2 Solution 2.3 Required hardware and software components

2.3

Required hardware and software components This application was generated with the following components:

Hardware components Table 2-1 Component

No.

Order number

Note

Sentron PAC 3200

1

7KM2112-0BA00-3AA0

Sentron PAC 4200

1

7KM4212-0BA00-3AA0

SIMATIC Rack PC

1

6AG4104-2....-....

Scalance X208

1

6GK5208-0BA00-2AA3

Standard software components Table 2-2 Component    d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

No.

WinCC Runtime Professional V11 SP2

1

Order number

Note

6AV2105-....1-0

Sample files and projects The following list includes all files and projects that are used in this example. Table 2-3 Component

Note

67318600_Sentron_PAC_Demo.zip

Demo project with sample configuration.

67318600_Sentron_PAC_Library.zip

Global library for integration into an own project.

67318600_Sentron_PAC_Faceplates_WinCC_Profe ssional.pdf

Documentation

Sentron PAC Faceplates 1.0, Entry ID: 67318600

9

3 Function Mechanisms of this Application

3

Function Mechanisms of this Application

General overview

Figure 3-1

 As can be seen in Figure 3-1, the application consists of two major software components.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

One component represents the faceplate that visualizes the Sentron PC power meter within WinCC Runtime. The second component is an "HMI data type" that defines the structure of all available measured values. Direct access to the values of the power meter is effected by specifying the "offset value". These two components can be used in your own project without any additional configuration effort.

     

   t    h   g    i   r   y   p   o    C

The connection between WinCC Runtime and the power meter is established via an Ethernet connection and the communication driver "Modicon Modbus TCP/IP".

10

Sentron PAC Faceplates 1.0, Entry ID: 67318600

3 Function Mechanisms of this Application 3.1 "HMI data type" functionality

3.1

"HMI data type" functionality

Figure 3-2

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

With an "HMI data type" a data structure can be pre-configured. From this structure can then instance tags be created that directly refer to a data area in the automation system (PLC) or other external devices. The HMI data type "Sentron PAC" contains by default all measured values listed in section 2.2. Note

It is irrelevant whether the faceplate for Sentron PAC3200 or Sentron PAC4200 is used. Both faceplates visualize the same measured values by default.

     

   t    h   g    i   r   y   p   o    C

If required, the HMI data type can also be adapted to your requirements. Further information on the creation and operation of these data types can be found in the help on WinCC Professional V11 at the following link: http://support.automation.siemens.com/WW/view/en/57341024 The data type contains 91 tags by default. These are 90 external tags representing the values from the power meter and one internal tag representing the "PAC_Index" value.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

11

3 Function Mechanisms of this Application 3.2 Functionality of the "Sentron PAC" faceplate

3.2

Functionality of the "Sentron PAC" faceplate Figure 3-3

The faceplate provided by this application consists of several single screens.    d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Figure 3-4

     

   t    h   g    i   r   y   p   o    C

For each measured value read out of the power meter there is one process screen. Example: „PAC3200_Voltage_PH_N“ for the voltage between phase and neutral conductor. In the respective process screen, the output fields for instantaneous, maximum, and minimum values are distributed to the three levels "INST", "MAX", and "MIN".

12

Sentron PAC Faceplates 1.0, Entry ID: 67318600

3 Function Mechanisms of this Application 3.2 Functionality of the "Sentron PAC" faceplate

Figure 3-5

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

The screens with the measured values are displayed at runtime in the "PAC3200_Main" process screen using the screen window technology. In this process screen, not only the graphical interface of the faceplate is defined but also the order in which the screens are displayed at runtime when the operator clicks the "F2" and "F3" buttons. The order is defined in a list box that can be shown or hidden via level 6 "Engineering". By default, the screens are called in the order which the operator knows from the power meter.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

13

3 Function Mechanisms of this Application 3.2 Functionality of the "Sentron PAC" faceplate Figure 3-6

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Note

The screen names in the list box must be identical with the actual screen names in the project tree.

Since there are no minimal values for the measured values "THD-R V" and "THD-R I", a field with the inscription "INST" is configured on level 7 "Special", which is displayed only when the user has the maximum values of these measured values displayed at runtime.

Program details on the visibility of the INST, MAX, and MIN values Depending on an internal counter tag "PAC_Index", the INST, MAX, and MIN values of the respective measured value are displayed.

14

Sentron PAC Faceplates 1.0, Entry ID: 67318600

3 Function Mechanisms of this Application 3.2 Functionality of the "Sentron PAC" faceplate The following table shows which values are displayed in which state of the tag.

Table 3-1 Value

Displayed value

1

Instantaneous values (INST)

2

Maximum values (MAX)

3

Minimum values (MIN)

 Also depending on the value of the "PAC_Index" tag, the objects on level 4 "Display 2" and level 5 "Display 3" are shown or hidden. The "PAC_Index" tag is also contained in the HMI data type and must be created for each visualized power meter.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Sentron PAC Faceplates 1.0, Entry ID: 67318600

15

4 Configuration

4

Configuration

Configuration of Sentron PAC3200/PAC4200 Table 4-1 No.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Instruction

Remarks

1.

Switch on the Sentron PAC.

2.

Click the "F4" button to go to the menu.

3.

Use the "F2" and "F3" buttons to navigate to the "Settings" item.

4.

Go to the "Settings" menu by clicking the "F4" button.

5.

Use the "F2" and "F3" buttons to navigate to the "Communication" item.

6.

Go to the "Communication" menu by clicking the "F4" button.

7.

Use the "F2" and "F3" buttons to navigate to the "IP-ADDR" item and then click the "F4" button.

8.

 Adapt the IP address to your network configuration.

In the supplied sample project, the IP address "172.16.78.7" is used for Sentron PAC3200 and the IP address "172.16.78.8" for Sentron PAC4200.

9.

Repeat step 8 for the subnet mask.

In the supplied sample project, the subnet mask "255.255.0.0" is used.

10.

Confirm your entries by clicking the "F4" button.

11.

Exit the menu by clicking the "F1" button.

12.

Confirm the prompt whether the device is to be restarted with "OK" by clicking the "F4" button.

Repeat steps 1-11 for all power meters that you want to visualize. Note

Make sure that every IP address is only used once in the network.

Further detailed information on the settings of the Sentron PAC power meters can be found in the respective manuals at the following links: Sentron PAC3200: http://support.automation.siemens.com/WW/view/en/26504150 Sentron PAC4200: http://support.automation.siemens.com/WW/view/en/34261595

16

Sentron PAC Faceplates 1.0, Entry ID: 67318600

5 Installation 5.1 Installation of the faceplate

5

Installation

Hardware installation The figure below shows the hardware configuration of the application.

Figure 5-1

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

5.1

Installation of the faceplate In order to use the faceplate and the associated HMI data type, the global library must be opened in the TIA Portal. Perform the steps listed in the following table to open the library.

Table 5-1 No.

Instruction

1

Download the "67318600_Sentron_PAC_Library.zip" file and unzip it with a program intended for this purpose.

2

Start the TIA Portal in the project view.

3

Then go to the "Libraries" task card.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

Remarks

17

5 Installation 5.2 Integration of the faceplate 4

Click the "Open global library" button.

5

Use the selection dialog to navigate to the file that was unzipped in step 1 in the "Sentron PAC" folder and select it.

6

Confirm the selection dialog with the "Open" button.

The "Sentron PAC" library is then to be found in the list of your global libraries.    d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

5.2

Integration of the faceplate This chapter describes the steps for the installation of the sample code.

Table 5-2 No.

Instruction

1

Copy the content of the "Sentron PAC" global library into the project library of your project using drag & drop.

2

Then copy the faceplate for the respective device from the "Master copies" folder into the "Screens" folder within the project tree.

3

Now go to the "Connections" editor.

4

Create a new connection with the communication driver "Modicon Modbus TCP/IP".

     

   t    h   g    i   r   y   p   o    C

18

Remarks

Sentron PAC Faceplates 1.0, Entry ID: 67318600

5 Installation 5.2 Integration of the faceplate No.

Instruction

5

Make the following changes in the parameter settings of the connection:

Remarks

CPU type: Unity, PL7: Premium, Micro, Quantum, M340 Port: 502 Server: IP address of a power meter Remote slave address: 1 Change word order: YES Use single write: YES

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

6

Now open a tags table within the "HMI tags" folder.

7

Create a new tag of the "Sentron_PAC" data type and assign it a name with which you can uniquely identify the device.

8

Then expand the structure tags. You can now see the tags for all measured values.

9

Then go to the library folder unpacked in section 5.1 in the Windows Explorer.

10

If you want to read out the data of a Sentron PAC3200, open the "Offset_PAC_3200.xlsx" file. If you want to read out the data of a Sentron PAC4200, open the "Offset_PAC_4200.xlsx" file.

     

   t    h   g    i   r   y   p   o    C

Sentron PAC Faceplates 1.0, Entry ID: 67318600

19

5 Installation 5.2 Integration of the faceplate No.

Instruction

11

Select all values and copy them to the clipboard.

12

Go back to the TIA Portal and paste the data from the clipboard into the "Address" column. Make sure that you start pasting the values at the first tag "Voltage_PH_N_L1".

13

In the following prompt, select the option "Overwrite Tag attributes" and confirm this by clicking the "OK" button.

14

Then create a new screen in your project and configure a screen window.

Remarks

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

20

Sentron PAC Faceplates 1.0, Entry ID: 67318600

5 Installation 5.2 Integration of the faceplate No.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S      

   t    h   g    i   r   y   p   o    C

Instruction

15

Go to the properties of the screen window in the inspector window.

16

Select the screen "PAC3200_Main" for the "Displayed screen" property if you want to visualize a PAC3200 or the screen "PAC4200_Main" if you want to visualize a PAC4200.

17

Now define the "Tag prefix" property of the screen window. The tag prefix is a combination of the tag name defined in step 7 and a "dot" at the end.

18

 Activate the "Fit window to screen" property for the screen window under "Characteristics".

Remarks

When you start WinCC Runtime now, the measured values of the respective device can be viewed in realtime.

Figure 5-2

Sentron PAC Faceplates 1.0, Entry ID: 67318600

21

6 Startup of the Application 6.1 Preparation

6

Startup of the Application

6.1

Preparation

Table 6-1 No.

Instruction

1

Download the "67318600_Sentron_PAC_Demo.zip" file and unzip it with a program intended for this purpose.

2

Make sure that all meters and the respective PC station are located in a physical as well as logical network.

3

Perform the configuration of Sentron PAC3200 or Sentron PAC4200 as described in section 4.1.

6.2    d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Remarks

Startup

Table 6-2 No.

Instruction

1

Start the TIA Portal.

2

Select the "Start" portal and then "Open an existing project".

3

Click the "Browse" button and navigate to the "Sentron_PAC_Demo.ap11" file unzipped in step 6.1. Confirm the selection dialog by clicking the "Open" button.

4

Go to the "project view" and open the device configuration of the PC station "PAC-Demo".

5

Open the properties of the PC station and enter the computer name of your PC.

6

Then start the runtime.

Remarks

     

   t    h   g    i   r   y   p   o    C

22

Sentron PAC Faceplates 1.0, Entry ID: 67318600

7 Operation of the Application 7.1 Overview

7

Operation of the Application

7.1

Overview Figure 7-1

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

The sample project represents a small demo application that includes two measuring ranges. One measuring range is detected with a Sentron PAC3200. The second measuring range is detected with a Sentron PAC4200. Both meters are visualized with the respective faceplate.

     

   t    h   g    i   r   y   p   o    C

Note

In order to have the measured values of the devices displayed at runtime, configure the devices as described in section 4.1 before starting the runtime.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

23

7 Operation of the Application 7.2 Displaying and operating the faceplate in runtime

7.2

Displaying and operating the faceplate in runtime

Displaying the faceplate

Table 7-1 No.

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Instruction

Remarks

1

After having started the runtime, click the "Sample project" button.

2

The process screen presented in section 7.1 is then displayed.

3

The Sentron PAC symbol each represents a button via which the faceplate can be opened. Click the button to open the faceplate for Sentron PAC3200 or Sentron PAC4200. Which faceplate is opened can be seen from the labeling next to it.

Operating the faceplate The following table shows the operating options for the faceplate using the buttons "F1" to "F4".

     

   t    h   g    i   r   y   p   o    C

Table 7-2

24

Instruction

Note

F1

By clicking the "F1" button, the instantaneous, maximum, and minimum values of the respective measured value can be displayed successively.

For the measured values "THD-R V" and "THD-R I" only the instantaneous and maximum values can be displayed.

F2

The "F2" button is for scrolling "down".

F3

The "F3" button is for scrolling "up".

F4

The "F4" button is not assigned by default.

Sentron PAC Faceplates 1.0, Entry ID: 67318600

8 Related Literature

8

Related Literature This list is not complete and only represents a selection of relevant information. Table 8-1 Subject

   d   e   v   r   e   s   e   r   s    t    h   g    i   r    l    l    A    3    1    0    2    G    A   s   n   e   m   e    i    S

Title

\1\

Reference to the entry

http://support.automation.siemens.com/WW/view/en/67318600

\2\

Siemens Industry Online Support

http://support.automation.siemens.com

\3\

Simple Introduction into Energy Management with WinCC V7

http://support.automation.siemens.com/WW/view/en/48586219

\4\

Energy Management with SIMATIC (iBook)

http://support.automation.siemens.com/WW/view/en/65593661

\5\

Configuration Example for SIMATIC powerrate V4.0 SP1

http://support.automation.siemens.com/WW/view/en/65384955

\6\

Configuration Example for SIMATIC B.Data

http://support.automation.siemens.com/WW/view/en/46641745

     

   t    h   g    i   r   y   p   o    C

9

History Table 9-1: Version

Date

V1.0

02/2013

Sentron PAC Faceplates 1.0, Entry ID: 67318600

Modifications

First version

25

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close