Automotive Solutions
Content
Automotive Test Solutions
Mobile Connectivity - Enabled
Automotive Test Solutions
The complexities of the modern automobile continue to increase with more and more
technology being added from communications to safety systems. These features add
cost and reliability issues which must be addressed in the early stages and throughout
the vehicles life.
Safety and Driver Aids
Anritsu offers an eCall tester based on a complete network
simulator and a software tool simulating Public Safety Answering
Points (PSAP). GPS modules, on-board sensors and radar systems
aiming to protect and aid the driver can also be comprehensively
tested.
GPS, eCall, TPMS, RKE, FMCW Radar, ERA-GLONASS
Intelligent Transport Sys
In-Vehicle Networks
The automotive industry is constantly increasing the presence of
technology in vehicles. In excess of a hundred separate control
units will be part of the future car, generating more and more
applications for informing and entertaining the passengers.
Ethernet, CAN, Optical Fibres, RF cables & connectors
ITS (Intelligent Transport
communication systems
connected car environm
communicating with oth
and signals.
V2V, V2X, C2C, M2M
stems
rt Systems) refers to a variety of
s inside or outside the vehicle. In the
ment, there are several sensors that are
her vehicles and the road, including lanes
Wireless Connectivity
Wireless technologies have acquired increasing importance
during the last decade in the automotive industry, making the
experience of driving safer and more comfortable. All these
wireless standards, including mobile, short range wireless and
navigation, help to keep the driver connected.
LTE/2G/3G, Bluetooth, Wi-Fi, AM/FM/DAB
Electromagnetic Interference
Anritsu offers a full set of instruments for ElectroMagnetic
Compatibility (EMC), where different technologies are
simultaneously operating in public frequency bands ensuring
EMC is an important requirement.
OTA, EMC, EMI, Interference Hunting
w ww.an rits u .com
Wireless Connectivity
Wireless technologies have acquired increasing importance during the last decade in the automotive
industry, making the experience of driving easier, safer and more comfortable. All these wireless
standards, including mobile, short range wireless and navigation, help to keep the driver connected
everywhere, while broadcast technologies are now utilized to keep all of the car occupants connected
and entertained.
Besides FM/AM radio, today’s vehicle incorporates digital radio (DAB) as well as video broadcasting,
including DVB and ISDB standards. Anritsu’s portfolio allows testing of these technologies at all stages
of product development, from R&D to production, providing dedicated solutions and universal wireless
testers that will ensure your products comply with the latest specification.
MD8475A Signalling Tester
MT8870A Universal Wireless Tester
• Supports multimode terminals and all cellular standards,
including LTE (2x2 MIMO), LTE-Advanced (Carrier
Aggregation).
• Designed for mass production of wireless modules, it
operates in a non-signalling environment for minimum
test time per unit.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Supports all wireless standards, including cellular, SRW,
navigation and broadcast.
• Automated mobile terminal verification testing with test
sequences.
• Modular design with up to 16 high performance RF
ports in one small chassis.
• Built-in PC with control and application server functions
reduces benchtop footprint.
• Built-in signal generator and signal analyser on each
module. Wide frequency range from 10 MHz to 6 GHz
and 160 MHz measurement bandwidth for 802.11ac,
LTE-Advanced and future standards.
The MD8475A is an all-in-one base
station simulator supporting LTE, LTEAdvanced,
W-CDMA/HSPA/HSPA
Evolution/DC-HSDPA, GSM/EGPRS,
CDMA2000 1X/1xEV-DO Rev. A and
TD-SCDMA/TD-HSPA. It supports services as eCall,
IMS, VoLTE, off-load tests and call-processing tests
for smartphones which are now present on vehicles.
In addition, the time required to configure a test
environment is greatly reduced by the easy-to-use GUIbased SmartStudio software, as well as supplied test
sequences for automatic remote control of the GUI. All
this will make vehicle testing easy, quick and reliable.
The MT8870A is the best solution for
testing at R&D and production stages
of all wireless standards: cellular (2G,
3G, LTE and LTE-Advanced), SRW
(802.11x, Bluetooth and ZigBee),
navigation (GPS, GLONASS, BeiDou and Galileo) and
broadcast technologies (AM/FM radio, DVB, DBV and
ISDB). It is ideal not only for production, where it can
make fast measurements, including calibration, validation
and 3GPP tests, but it also includes CombiView which is
ideal for R&D and troubleshooting. And it is prepared
for future standards due without additional hardware
improvements, thanks to its wide frequency operating
range and 160 MHz measurement bandwidth.
MG3710A Vector Signal Generator
MS2830A Spectrum Analyzer
• Supports frequencies of 100 kHz to 2.7/4/6 GHz.
• 9 kHz to 26.5/43 GHz frequency range.
• Built-in wideband (160 MHz/120 MHz) baseband signal
generator.
• For wideband down-converter; built-in 1 GHz IF output
band.
• Dual RF Opt provides two independent RF outputs.
• Best-of-class wide dynamic range over 6 GHz.
• Dual Waveform Memory (Optional) enables two
independently modulated signals per RF Output.
• Supports Noise Figure and BER measurement.
The MG3710A is a best-of-class, multifunction, signal generator with excellent
RF and baseband performance that
can be used to test performance on
all in-vehicle broadcast technologies
including AM, DVB, ISDB and Bluetooth standards
among others. The built-in ARB can reproduce any signal
created from a mathematical program, thus completing
the range of broadcast technologies. For example, FM
& RDS or DAB.
It MG3710A features wideband vector modulation and
offers built-in baseband waveform generation with
large-capacity memory to ensure maximum versatility.
It supports all key mobile communications and
wireless LAN standards, and it also has the exceptional
performance required for emerging and proprietary
wireless communications technologies.
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A is the best option for
in-vehicle testing of 2G, 3G, LTE and
LTE-Advanced signals. It supports
measurement of modulation and Tx
characteristics, including adjacent
channel leakage power and spectrum mask as well as
spurious measurements requiring a wide dynamic range.
The capture and replay function can be used to better
compare the real world effects with simulated designs
and performance, which will ensure the product quality.
MT8820C Radio Communications Analyzer
• Supports evaluation of RF TRx characteristics.
• RF tests for LTE-Advanced DL CA, LTE and 2G/3G
terminals.
• Supports both call processing and non-call processing
modes.
MT8860C WLAN Test Set
• Integrated test set for 802.11b/g/a/n transmitter and
receiver measurements.
• “Network” mode - tests devices using standard WLAN
protocols to establish a connection to the DUT.
• ”Direct” mode - tests WLAN devices with the support
of test mode software from the silicon supplier.
• LANLook software for instrument configuration and
results display.
The MT8820C is an all-in-one
solution
supporting
all
cellular
standards available on a vehicle,
including LTE-Advanced, LTE, 3G
and 2G technologies. It is a high-end instrument for
RF measurements, which makes it ideal for all stages
of product development, not only for R&D but also
at production due to its non-call processing mode,
reducing test times to optimise cost per unit.
• CombiTest software for production test requirements.
The MT8860C is the only WLAN Test
Set with Network and Direct modes for
testing all WLAN devices integrated to
a vehicle, conforming to IEEE 802.11
standards. It is an integrated one-box test set dedicated
to testing 802.11 WLAN devices. It provides a highspeed measurement solution that is suitable for both
production testing and design proving. In one box,
it replaces existing test systems that typically require
power meters, spectrum analyzers, and Gold Radios
with external attenuators. The result is a test instrument
with faster integration into production (direct mode),
offers a universal solution for all WLAN chip sets, and is
simpler to maintain and calibrate.
w ww.an rits u .com
Safety and Driver Aids
Aiming to ensure safety and the quickest responses from emergency services in the event of a traffic
accident, an emergency call (eCall) made automatically by an involved car could save millions of lives. As
soon as on-board sensors (e.g. the airbag sensors) register a serious accident, the car will automatically
dial the standard emergency phone number and send vital information including location and speed.
Once that vital information is transmitted, a voice channel will be established between the call centre
operator and the passengers to check their status.
Anritsu offers an eCall tester based on a complete network simulator and a software tool simulating Public
Safety Answering Points (PSAP). GPS modules, on-board sensors and radar systems aiming to protect
and aid the driver can be tested using Anritsu’s Spectrum Analyzers, Signal Generators or Universal
Wireless Testers.
ME7838A VectorStar Vector Network Analyzer
MT8870A Universal Wireless Tester
• The VectorStar ME7838 Series broadband VNA offers
the widest available single frequency sweep from
70 kHz to 110/125/145 GHz with mmWave bands to
1.1 THz.
• Designed for high volume smartphones, tablets and
wireless modules manufacturing test applications.
• Industry-best calibration and measurement stability:
0.1 dB vs. 0.6 dB over 24 hrs.
• All versions support the 3744x-Rx receiver for noise
figure measurements to 125 GHz.
• Compact, lightweight mmWave modules (0.6 lb vs
7+ lbs and 1/50 the volume) offer low cost installation
on smaller probe stations.
The ME7838A
broadband system
addresses the needs of semiconductor
fab and fabless companies targeting
automotive radar applications. In
addition to continued growth in 77 &
92 GHz automotive radar III-V development, it is expected
that a major push for emerging SiGe development will
continue. SiGe will offer lower costs and prices for the
automotive industry and push car radar into mid to low
price models. The ME7838A is used during the design
phase where device characterization is used to analyze
broadband performance of transistors and MMICs for
radar systems and sub-systems.
• Modular design with up to 16 high performance RF
ports in one small chassis, to minimize test time and
ensure an efficient cost per tested unit.
• Built-in signal generator and signal analyzer on each
module.
Positioning
and
localization
technologies are now key in the
connected car, and they must be tested
to ensure compliance with international
standards. The MT8870A is the best
option for testing at R&D and production stages of
all wireless standards. This all-in-one box can perform
sensitivity, BER and functional tests for navigation
modules (GPS, GLONASS, BeiDou and Galileo).
MG3710A Vector Signal Generator
MD8475A Signalling Tester
• Supports frequencies of 100 kHz to 2.7/4/6 GHz.
• Supports multimode terminals.
• Built-in wideband (160 MHz/120 MHz) baseband signal
generator
• LTE (2x2 MIMO), LTE-Advanced (Carrier Aggregation),
W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/
EGPRS, CDMA2000 1X/1xEV-DO Rev. A, TD-SCDMA/
TD-HSPA.
• Dual RF (Optional) provides two independent RF
outputs.
• Dual Waveform Memory (Optional) enables two
independently modulated signals per RF Output.
The MG3710A can be used as an
Arbitrary Waveform Generator, totally
flexible for simulating GNSS signals
(i.e. GPS, GLONASS), perfect for
driver-aid systems development. Its
dual RF option makes it easy to implement complex
test scenarios that would normally require multiple
synchronized signal generators, such as:
• Wanted + interference signals for receiver blocking
testing
• Wanted + two CW tones for receiver intermodulation
testing
• Wanted + delayed signals for multipath testing
MS2830A Spectrum Analyzer
• 9 kHz to 26.5/43 GHz frequency range; 43 GHz max.
built-in pre-amp option.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement (options).
• Excellent eco-friendly product with low power
consumption of 190 VA min.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Supports 2-cell test environment, including Inter-RAT
Cell Reselection, Redirection, Cell Change, CS Fallback,
etc.
• eCall tester can be reliably integrated with the platform.
• Built-in PC with control and application server functions
reduces benchtop footprint.
• Automated mobile terminal verification testing with test
sequences.
The
MD8475A
helps
to
the
development
of
in-car
safety
technologies such as eCall or ERAGLONASS. The Network Simulator
can be easily integrated with an IVS
module for simulating end-to-end emergency calls as
per the mentioned standards.
The MS2830A is a multi-application tool for Automotive
Industry. The system uses a built-in vector signal
generator to reproduce captured actual signals. These
captured pulse signals and noise are analyzed using
the flexible VSA function supporting Spectrum, Power
vs. Time and Frequency vs. Time displays. In addition,
spectrum performance can be checked intuitively using
the Spectrogram display showing frequency, time, and
power on one screen to troubleshoot and develop car
wireless equipment, such as RKE and TPMS, using FSK
signals. The characteristics of time-shifted signals, such
as DSRC and IEEE 802.11p used for car-to-car and roadto-car communications, can be measured using analysis
tools like MATLAB.
w ww.an rits u .com
In-Vehicle Networks
The Automotive Industry is constantly increasing the presence of technology in-vehicles. With sometime
more than a hundred separate control units in the modern vehicle, all generating more and more
applications for informing and entertaining the passengers. All these devices, connected with each
other, are constantly sending data to central computers or displays. Anritsu’s OTDR and GigE analyzers
are used for ensuring the high transmission rates in all points of the in-vehicle network.
Anritsu’s Site Master and Vector Network Analyzers will easily check the proper continuity of cables and
connectors.
MT9090A Network Master uOTDR
MS46122A USB Vector Network Analyzer
• High-end OTDR performance in a pocket-size package.
• World’s first series of compact VNAs from 1MHz to 40
GHz for cost-effective measurements.
• Exclusive, integrated launch fiber provides accurate
initial connector measurement without external devices.
• Bluetooth, Wi-Fi and Ethernet connectivity.
• Complete PON testing through splitters up to 1 x 64.
• High resolution and extremely short deadzones ensure
thorough short fiber evaluation.
• Complete fiber maintenance tool including optical
power meter and visible source “red light”.
The MT9090A is the right answer
for testing the growing optical
elements that form part of the car’s
communication
and
infotainment
systems. The increasing amount of
optical sensors in cars will require uncountable checks
of optical cables, connectors or splitters. The MT9090A
is the easiest and most comprehensive means of
completing these tests.
S331E Handheld Spectrum Analyzer
• Cable and Antenna Analyzer: 2 MHz – 4 GHz
• Return Loss, VSWR, Cable Loss, Distance-To-Fault,
Smith Chart, 1-Port Phase
• Field-proven design: Four-hour battery life, rugged,
compact, lightweight, daylight viewable display
• USB connectivity, built-in touch screen keyboard
• Intuitive menu-driven touch screen user interface
• PC control takes advantage of external computer
processing power and functionality.
• Compact 1U high package for efficient use of bench
and rack space.
• Time domain with time gating option grants easier and
faster fault identification.
Anritsu Shockline Compact VNA
MS46122A is the smallest, most
advanced 2-port VNA in the world.
The series benefits from patented shock line VNAon-chip technology, which simplifies the internal VNA
architecture at high frequencies, reduces instrument
cost, and enhances accuracy and measurement
repeatability. All the members of the MS46122A series
are low cost full-reversing 2-port VNAs aimed at RF and
microwave applications in manufacturing, engineering
and education. With 220 microseconds per point sweep
speed and better than 100 dB dynamic range they
are extremely suitable for a wide variety of device test
applications in the Automotive Industry, such as cable,
connectors (including FAKRA), antenna or radar.
Anritsu S331E SiteMaster Compact
Handheld Cable and Antenna Analyzer
can complete sweeps quickly, perform
calibrations instantly, and implement
fast trace naming while in the field.
Ideal product for Cable & Antenna Installation and
Maintenance in the automotive industry. Insertion Loss ,
2-port measurements of Amplifiers, duplexers, diplexers
or filters , Phase Matching Cables and Antenna Tuning
are relevant applications fitting into the upcoming invehicle networks.
MT1000A Network Master Pro
MT9090A Gigabit Ethernet Analyzer
• All-in-one field transport tester – supports testing from
1.5 Mbps to 10 Gbps.
• Versatile, purpose-built solution for Gigabit Ethernet
field testing.
• Traffic generation up to full line rate
• Comprehensive Ethernet testing for installation,
maintenance and troubleshooting.
• Ethernet Service Activation Test (Y.1564)
• Automated RFC 2544 tests of Throughput, Frame Loss,
Latency or Packet Jitter, Burstability
• BER tests – include Frame Loss and Sequence Error
tests
• Simultaneous monitoring in both line directions
• Ping test, traceroute test and Electrical cable
diagnostics.
• Two ports simultaneously work for shortening multiple
ports installation, including pass through test and in-line
monitoring test.
• IP Channel Statistics to identify error streams, top
talkers, network attacks
• Option for automated ITU-T Y.1564 testing,
simultaneously testing of multiple traffic streams
emulating real world networks.
• Frame capture for protocol analysis with Wireshark
• Option for automated RFC 2544 testing.
• Electrical cable tests and optical signal level displays
• Test Automator simplifies operation and ensure proper
set-up.
• Easy and intuitive GUI.
• Channel Stats option identifies error streams, top
talkers and network attack.
• Dual port at all rates.
• WLAN/Bluetooth/LAN connectivity.
• PDF and XML report generation for documentation of
test results.
• Remote operation and remote control (scripting).
Today’s in-vehicle communication
networks are becoming more and more
sophisticated as new technologies
like Ethernet is being fully deployed
alongside the entire car. The MT1000A
redefines the direction of future test platforms by
bringing network test requirements to a portable device,
making it the ideal tool for field testing.
• Service disruption time measurement to test the
performance of real-time applications.
For installation, commissioning and
quality verification the Network Master
Gigabit Ethernet tester provides
powerful and flexible traffic generation
capabilities, allowing you to easily
test the in-vehicle network under various conditions,
including generation of VLAN traffic. The instrument
also provides facilities for BER testing of the lines,
performance statistics and quality evaluation.
w ww.an rits u .com
Intelligent Transport System
ITS (Intelligent Transport Systems) refers to all types of communication inside or outside the vehicle. In
the connected car environment, there are several sensors that are communicating with other vehicles
and the road, including lanes and signals. Current applications, known as C2C (Car 2 Car), V2V (Vehicle
to Vehicle) or V2X (Vehicle to X) include radar and eCall, but this will increase in the next few years as
vehicles will be equipped with a higher number of sensors and driver aids.
Anritsu offers a complete set of instruments and compact software solutions to make M2M (Machine to
Machine) testing easy and in line with ITS standards, as well as 802.11p.
MD8475A
Signalling Tester
.
MS2830A Spectrum Analyzer
• Supports multimode terminals and all cellular standards,
including LTE (2x2 MIMO), LTE-Advanced (Carrier
Aggregation).
• 9 kHz to 26.5/43 GHz frequency range.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Automated mobile terminal verification testing with test
sequences.
• Built-in PC with control and application server functions
reduces benchtop footprint.
The MD8475A is an all-in-one base
station simulator supporting all
cellular standards and M2M specific
applications. It supports services as
eCall, IMS, VoLTE, WLAN off-load tests
and call-processing tests for smartphones which are now
present on vehicles. In addition, the time required to
configure a test environment is greatly reduced by the
easy-to-use GUI-based SmartStudio software, as well as
supplied test sequences for automatic remote control of
the GUI. All this will make V2V testing easy, quick and
reliable.
• For wideband down-converter; built-in 1 GHz IF output
band.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement.
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A can be used for testing
of 2G, 3G, LTE and LTE-Advanced
signals on a vehicle-to-vehicle or
vehicle-to-x test environment. It
supports measurement of modulation
and Tx characteristics, including adjacent channel
leakage power and spectrum mask as well as spurious
measurements requiring a wide dynamic range. The
capture and replay function can be used to better
compare the real world effects with simulated designs
and performance, which will ensure the product quality.
MT8870A Universal Wireless Tester
• Designed for mass production of wireless modules, it
operates in a non-signalling environment for minimum
test time per unit.
• Supports all wireless standards, including cellular, SRW,
navigation and broadcast.
• Modular design with up to 16 high performance RF
ports in one small chassis.
• Built-in signal generator and signal analyser on each
module. Wide frequency range from 10 MHz to 6 GHz
and 160 MHz measurement bandwidth for 802.11ac,
LTE-Advanced and future standards.
The MT8870A is the best solution for
testing at R&D and production stages
of all M2M, V2V, V2X technologies.
It is ideal not only for production,
where it can make fast measurements,
including calibration, validation and tests according to
the relevant standards, but it also includes CombiView
which is ideal for R&D and troubleshooting. And it is
prepared for future standards due without additional
hardware improvements, thanks to its wide frequency
operating range and 160 MHz measurement bandwidth.
w ww.an rits u .com
Electromagnetic Interference
Anritsu offers a full set of instruments for electromagnetic compatibility (EMC).
Where different
technologies are simultaneously operating in public frequency bands thorough EMC and EMI testing are
of vital importance.
Electromagnetic interference (EMI) testing is a must before launching a product into the real wireless
world. Spectrum Analyzers, near field probes and handhelds from Anritsu will ensure your product is
compatible with the standards.
MS2720T Series Handheld Spectrum Analyzer
MS2711E Series Handheld Spectrum Analyzer
• Five options offering 9 kHz to 9, 13, 20, 32 & 43 GHz.
• Spectrum Analyzer: 9 kHz to 3 GHz.
• Internal Atomic Clock option for the ultimate in
handheld frequency accuracy.
• Interference Analyzer with Interference Mapping.
• Measurements: Occupied Bandwidth, Channel Power,
ACPR, C/I, Emission Mask, Field Strength, Interference
Analyzer: Spectrogram, Signal Strength, RSSI, Mapping.
• High Accuracy Power Meter.
• Channel Scanner, GPS, AM/FM/PM Analyzer.
• Tracking Generator: 500 kHz to 3.0 GHz.
• Tracking Generator up to 20 GHz.
• Field-proven design: Three-hour battery life, rugged,
compact, lightweight, daylight viewable display.
Spectrum Master MS2720T is a
multifunctional tool ideal for EMC/EMI
testing in automotive environments.
From Transmitter Spectrum Analysis
to Received Signal Analysis, where
location and identification of in-band
interference and out-of-band spurios signals need to
be tested, MS2720T is ideal. Also perfect for Signal
Strength Mapping in order to determine the most
suitable location for antennas in the car or AM & FM
analog proofing measurements. The two-port front end
with tracking generator function allows the measurement
of filters, attenuators, amplifiers and cables inside the
car.
MS2711E can reach almost the
same range of applications than its
bigger brother MS2720T. Its overall
performance is more than enough
whether you are performing complex
interference analysis or assessing signal
quality. The MS2711E Spectrum Master delivers ease
of use, rich functionality, and the best-in-class price/
performance you’ve come to expect from Anritsu.
MT8820C Radio Communications Analyzer
MS2830A Spectrum Analyzer
• Supports evaluation of RF TRx characteristics.
• 9 kHz to 26.5/43 GHz frequency range; 43 GHz max.
built-in pre-amp option.
• RF tests for LTE-Advanced DL CA, LTE and 2G/3G
terminals.
• Supports both call processing and non-call processing
modes.
• Batch measurements for key measurement items for RF
Tx tests.
The MT8820C supports high-speed
batch measurements of RF TRx
characteristics and call connection
tests for LTE-Advanced, LTE and
2G/3G mobile modules that could
be integrated into the car’s communication system.
The MT8820C is also extremely suited to Over-the-Air
(OTA) environments for EMC testing, being perfectly
applicable in automotive, where the chassis effect over
the multiple antennas integrated in the car must comply
with strict regulations.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement (options).
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A supports measurements
of Tx characteristics, including adjacent
channel leakage power, spectrum
mask, and frequency counter, as well
as spurious measurements requiring a
wide dynamic range. It offers an EMI
measurement detection mode and RBW configurations
used for CISPR standards.
w ww.an rits u .com
Specifications are subject to change without notice.
Anritsu Corporation
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan
Phone: +81-46-223-1111
Fax: +81-46-296-1238
• U.S.A.
Anritsu Company
1155 East Collins Blvd., Suite 100, Richardson,
TX 75081, U.S.A.
Toll Free: 1-800-267-4878
Phone: +1- 972-644-1777
Fax: +1-972-671-1877
• Canada
Anritsu Electronics Ltd.
700 Silver Seven Road, Suite 120, Kanata,
Ontario K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006
• Brazil
Anritsu Eletrônica Ltda.
Praça Amadeu Amaral, 27 - 1 Andar
01327-010 - Bela Vista - São Paulo - SP - Brasil
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940
• Mexico
Anritsu Company, S.A. de C.V.
• Italy
• India
Anritsu S.p.A.
Via Elio Vittorini 129, 00144 Roma, Italy
Phone: +39-6-509-9711
Fax: +39-6-502-2425
• Sweden
Anritsu AB
Borgarfjordsgatan 13A, 164 40 KISTA, Sweden
Phone: +46-8-534-707-00
Fax: +46-8-534-707-30
• Finland
Anritsu AB
Teknobulevardi 3-5, FI-01530 VANTAA, Finland
Phone: +358-20-741-8100
Fax: +358-20-741-8111
• Denmark
Anritsu A/S (Service Assurance)
Anritsu AB (Test & Measurement)
Kay Fiskers Plads 9, 2300 Copenhagen S, Denmark
Phone: +45-7211-2200
Fax: +45-7211-2210
• Russia
Anritsu EMEA Ltd.
Representation Office in Russia
Av. Ejército Nacional No. 579 Piso 9, Col. Granada
11520 México, D.F., México
Phone: +52-55-1101-2370
Fax: +52-55-5254-3147
Tverskaya str. 16/2, bld. 1, 7th floor.
Russia, 125009, Moscow
Phone: +7-495-363-1694
Fax: +7-495-935-8962
Anritsu EMEA Ltd.
Anritsu EMEA Ltd.
Dubai Liaison Office
• U.K.
200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.
Phone: +44-1582-433200
Fax: +44-1582-731303
• France
Anritsu S.A.
12 avenue du Québec, Bâtiment Iris 1- Silic 638,
91140 VILLEBON SUR YVETTE, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65
• Germany
Anritsu GmbH
Nemetschek Haus, Konrad-Zuse-Platz 1
81829 München, Germany
Phone: +49-89-442308-0
Fax: +49-89-442308-55
• United Arab E mirates
P O Box 500413 - Dubai Internet City
Al Thuraya Building, Tower 1, Suit 701, 7th Floor
Dubai, United Arab Emirates
Phone: +971-4-3670352
Fax: +971-4-3688460
• Singapore
Anritsu Pte. Ltd.
Anritsu Pte. Ltd.
India Branch Office
3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road,
HAL 3rd Stage, Bangalore - 560 075, India
Phone: +91-80-4058-1300
Fax: +91-80-4058-1301
• P.R. China (Hong Kong)
Anritsu Company Ltd.
Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,
No. 1 Science Museum Road, Tsim Sha Tsui East,
Kowloon, Hong Kong
Phone: +852-2301-4980
Fax: +852-2301-3545
• P.R. China (Beijing)
Anritsu Company Ltd.
Beijing Representative Office
Room 2008, Beijing Fortune Building,
No. 5, Dong-San-Huan Bei Road,
Chao-Yang District, Beijing 100004, P.R. China
Phone: +86-10-6590-9230
Fax: +86-10-6590-9235
• Korea
Anritsu Corporation, Ltd.
8F Hyunjuk Building, 832-41, Yeoksam Dong,
Kangnam-ku, Seoul, 135-080, Korea
Phone: +82-2-553-6603
Fax: +82-2-553-6604
• Australia
Anritsu Pty. Ltd.
Unit 21/270 Ferntree Gully Road, Notting Hill,
Victoria 3168, Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255
• Taiwan
Anritsu Company Inc.
7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan
Phone: +886-2-8751-1816
Fax: +886-2-8751-1817
60 Alexandra Terrace, #02-08, The Comtech (Lobby A)
Singapore 118502
Phone: +65-6282-2400
Fax: +65-6282-2533
Please contact:
Part Number ?????-???
Issue 1
11 /14
Mobile Connectivity - Enabled
Automotive Test Solutions
The complexities of the modern automobile continue to increase with more and more
technology being added from communications to safety systems. These features add
cost and reliability issues which must be addressed in the early stages and throughout
the vehicles life.
Safety and Driver Aids
Anritsu offers an eCall tester based on a complete network
simulator and a software tool simulating Public Safety Answering
Points (PSAP). GPS modules, on-board sensors and radar systems
aiming to protect and aid the driver can also be comprehensively
tested.
GPS, eCall, TPMS, RKE, FMCW Radar, ERA-GLONASS
Intelligent Transport Sys
In-Vehicle Networks
The automotive industry is constantly increasing the presence of
technology in vehicles. In excess of a hundred separate control
units will be part of the future car, generating more and more
applications for informing and entertaining the passengers.
Ethernet, CAN, Optical Fibres, RF cables & connectors
ITS (Intelligent Transport
communication systems
connected car environm
communicating with oth
and signals.
V2V, V2X, C2C, M2M
stems
rt Systems) refers to a variety of
s inside or outside the vehicle. In the
ment, there are several sensors that are
her vehicles and the road, including lanes
Wireless Connectivity
Wireless technologies have acquired increasing importance
during the last decade in the automotive industry, making the
experience of driving safer and more comfortable. All these
wireless standards, including mobile, short range wireless and
navigation, help to keep the driver connected.
LTE/2G/3G, Bluetooth, Wi-Fi, AM/FM/DAB
Electromagnetic Interference
Anritsu offers a full set of instruments for ElectroMagnetic
Compatibility (EMC), where different technologies are
simultaneously operating in public frequency bands ensuring
EMC is an important requirement.
OTA, EMC, EMI, Interference Hunting
w ww.an rits u .com
Wireless Connectivity
Wireless technologies have acquired increasing importance during the last decade in the automotive
industry, making the experience of driving easier, safer and more comfortable. All these wireless
standards, including mobile, short range wireless and navigation, help to keep the driver connected
everywhere, while broadcast technologies are now utilized to keep all of the car occupants connected
and entertained.
Besides FM/AM radio, today’s vehicle incorporates digital radio (DAB) as well as video broadcasting,
including DVB and ISDB standards. Anritsu’s portfolio allows testing of these technologies at all stages
of product development, from R&D to production, providing dedicated solutions and universal wireless
testers that will ensure your products comply with the latest specification.
MD8475A Signalling Tester
MT8870A Universal Wireless Tester
• Supports multimode terminals and all cellular standards,
including LTE (2x2 MIMO), LTE-Advanced (Carrier
Aggregation).
• Designed for mass production of wireless modules, it
operates in a non-signalling environment for minimum
test time per unit.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Supports all wireless standards, including cellular, SRW,
navigation and broadcast.
• Automated mobile terminal verification testing with test
sequences.
• Modular design with up to 16 high performance RF
ports in one small chassis.
• Built-in PC with control and application server functions
reduces benchtop footprint.
• Built-in signal generator and signal analyser on each
module. Wide frequency range from 10 MHz to 6 GHz
and 160 MHz measurement bandwidth for 802.11ac,
LTE-Advanced and future standards.
The MD8475A is an all-in-one base
station simulator supporting LTE, LTEAdvanced,
W-CDMA/HSPA/HSPA
Evolution/DC-HSDPA, GSM/EGPRS,
CDMA2000 1X/1xEV-DO Rev. A and
TD-SCDMA/TD-HSPA. It supports services as eCall,
IMS, VoLTE, off-load tests and call-processing tests
for smartphones which are now present on vehicles.
In addition, the time required to configure a test
environment is greatly reduced by the easy-to-use GUIbased SmartStudio software, as well as supplied test
sequences for automatic remote control of the GUI. All
this will make vehicle testing easy, quick and reliable.
The MT8870A is the best solution for
testing at R&D and production stages
of all wireless standards: cellular (2G,
3G, LTE and LTE-Advanced), SRW
(802.11x, Bluetooth and ZigBee),
navigation (GPS, GLONASS, BeiDou and Galileo) and
broadcast technologies (AM/FM radio, DVB, DBV and
ISDB). It is ideal not only for production, where it can
make fast measurements, including calibration, validation
and 3GPP tests, but it also includes CombiView which is
ideal for R&D and troubleshooting. And it is prepared
for future standards due without additional hardware
improvements, thanks to its wide frequency operating
range and 160 MHz measurement bandwidth.
MG3710A Vector Signal Generator
MS2830A Spectrum Analyzer
• Supports frequencies of 100 kHz to 2.7/4/6 GHz.
• 9 kHz to 26.5/43 GHz frequency range.
• Built-in wideband (160 MHz/120 MHz) baseband signal
generator.
• For wideband down-converter; built-in 1 GHz IF output
band.
• Dual RF Opt provides two independent RF outputs.
• Best-of-class wide dynamic range over 6 GHz.
• Dual Waveform Memory (Optional) enables two
independently modulated signals per RF Output.
• Supports Noise Figure and BER measurement.
The MG3710A is a best-of-class, multifunction, signal generator with excellent
RF and baseband performance that
can be used to test performance on
all in-vehicle broadcast technologies
including AM, DVB, ISDB and Bluetooth standards
among others. The built-in ARB can reproduce any signal
created from a mathematical program, thus completing
the range of broadcast technologies. For example, FM
& RDS or DAB.
It MG3710A features wideband vector modulation and
offers built-in baseband waveform generation with
large-capacity memory to ensure maximum versatility.
It supports all key mobile communications and
wireless LAN standards, and it also has the exceptional
performance required for emerging and proprietary
wireless communications technologies.
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A is the best option for
in-vehicle testing of 2G, 3G, LTE and
LTE-Advanced signals. It supports
measurement of modulation and Tx
characteristics, including adjacent
channel leakage power and spectrum mask as well as
spurious measurements requiring a wide dynamic range.
The capture and replay function can be used to better
compare the real world effects with simulated designs
and performance, which will ensure the product quality.
MT8820C Radio Communications Analyzer
• Supports evaluation of RF TRx characteristics.
• RF tests for LTE-Advanced DL CA, LTE and 2G/3G
terminals.
• Supports both call processing and non-call processing
modes.
MT8860C WLAN Test Set
• Integrated test set for 802.11b/g/a/n transmitter and
receiver measurements.
• “Network” mode - tests devices using standard WLAN
protocols to establish a connection to the DUT.
• ”Direct” mode - tests WLAN devices with the support
of test mode software from the silicon supplier.
• LANLook software for instrument configuration and
results display.
The MT8820C is an all-in-one
solution
supporting
all
cellular
standards available on a vehicle,
including LTE-Advanced, LTE, 3G
and 2G technologies. It is a high-end instrument for
RF measurements, which makes it ideal for all stages
of product development, not only for R&D but also
at production due to its non-call processing mode,
reducing test times to optimise cost per unit.
• CombiTest software for production test requirements.
The MT8860C is the only WLAN Test
Set with Network and Direct modes for
testing all WLAN devices integrated to
a vehicle, conforming to IEEE 802.11
standards. It is an integrated one-box test set dedicated
to testing 802.11 WLAN devices. It provides a highspeed measurement solution that is suitable for both
production testing and design proving. In one box,
it replaces existing test systems that typically require
power meters, spectrum analyzers, and Gold Radios
with external attenuators. The result is a test instrument
with faster integration into production (direct mode),
offers a universal solution for all WLAN chip sets, and is
simpler to maintain and calibrate.
w ww.an rits u .com
Safety and Driver Aids
Aiming to ensure safety and the quickest responses from emergency services in the event of a traffic
accident, an emergency call (eCall) made automatically by an involved car could save millions of lives. As
soon as on-board sensors (e.g. the airbag sensors) register a serious accident, the car will automatically
dial the standard emergency phone number and send vital information including location and speed.
Once that vital information is transmitted, a voice channel will be established between the call centre
operator and the passengers to check their status.
Anritsu offers an eCall tester based on a complete network simulator and a software tool simulating Public
Safety Answering Points (PSAP). GPS modules, on-board sensors and radar systems aiming to protect
and aid the driver can be tested using Anritsu’s Spectrum Analyzers, Signal Generators or Universal
Wireless Testers.
ME7838A VectorStar Vector Network Analyzer
MT8870A Universal Wireless Tester
• The VectorStar ME7838 Series broadband VNA offers
the widest available single frequency sweep from
70 kHz to 110/125/145 GHz with mmWave bands to
1.1 THz.
• Designed for high volume smartphones, tablets and
wireless modules manufacturing test applications.
• Industry-best calibration and measurement stability:
0.1 dB vs. 0.6 dB over 24 hrs.
• All versions support the 3744x-Rx receiver for noise
figure measurements to 125 GHz.
• Compact, lightweight mmWave modules (0.6 lb vs
7+ lbs and 1/50 the volume) offer low cost installation
on smaller probe stations.
The ME7838A
broadband system
addresses the needs of semiconductor
fab and fabless companies targeting
automotive radar applications. In
addition to continued growth in 77 &
92 GHz automotive radar III-V development, it is expected
that a major push for emerging SiGe development will
continue. SiGe will offer lower costs and prices for the
automotive industry and push car radar into mid to low
price models. The ME7838A is used during the design
phase where device characterization is used to analyze
broadband performance of transistors and MMICs for
radar systems and sub-systems.
• Modular design with up to 16 high performance RF
ports in one small chassis, to minimize test time and
ensure an efficient cost per tested unit.
• Built-in signal generator and signal analyzer on each
module.
Positioning
and
localization
technologies are now key in the
connected car, and they must be tested
to ensure compliance with international
standards. The MT8870A is the best
option for testing at R&D and production stages of
all wireless standards. This all-in-one box can perform
sensitivity, BER and functional tests for navigation
modules (GPS, GLONASS, BeiDou and Galileo).
MG3710A Vector Signal Generator
MD8475A Signalling Tester
• Supports frequencies of 100 kHz to 2.7/4/6 GHz.
• Supports multimode terminals.
• Built-in wideband (160 MHz/120 MHz) baseband signal
generator
• LTE (2x2 MIMO), LTE-Advanced (Carrier Aggregation),
W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/
EGPRS, CDMA2000 1X/1xEV-DO Rev. A, TD-SCDMA/
TD-HSPA.
• Dual RF (Optional) provides two independent RF
outputs.
• Dual Waveform Memory (Optional) enables two
independently modulated signals per RF Output.
The MG3710A can be used as an
Arbitrary Waveform Generator, totally
flexible for simulating GNSS signals
(i.e. GPS, GLONASS), perfect for
driver-aid systems development. Its
dual RF option makes it easy to implement complex
test scenarios that would normally require multiple
synchronized signal generators, such as:
• Wanted + interference signals for receiver blocking
testing
• Wanted + two CW tones for receiver intermodulation
testing
• Wanted + delayed signals for multipath testing
MS2830A Spectrum Analyzer
• 9 kHz to 26.5/43 GHz frequency range; 43 GHz max.
built-in pre-amp option.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement (options).
• Excellent eco-friendly product with low power
consumption of 190 VA min.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Supports 2-cell test environment, including Inter-RAT
Cell Reselection, Redirection, Cell Change, CS Fallback,
etc.
• eCall tester can be reliably integrated with the platform.
• Built-in PC with control and application server functions
reduces benchtop footprint.
• Automated mobile terminal verification testing with test
sequences.
The
MD8475A
helps
to
the
development
of
in-car
safety
technologies such as eCall or ERAGLONASS. The Network Simulator
can be easily integrated with an IVS
module for simulating end-to-end emergency calls as
per the mentioned standards.
The MS2830A is a multi-application tool for Automotive
Industry. The system uses a built-in vector signal
generator to reproduce captured actual signals. These
captured pulse signals and noise are analyzed using
the flexible VSA function supporting Spectrum, Power
vs. Time and Frequency vs. Time displays. In addition,
spectrum performance can be checked intuitively using
the Spectrogram display showing frequency, time, and
power on one screen to troubleshoot and develop car
wireless equipment, such as RKE and TPMS, using FSK
signals. The characteristics of time-shifted signals, such
as DSRC and IEEE 802.11p used for car-to-car and roadto-car communications, can be measured using analysis
tools like MATLAB.
w ww.an rits u .com
In-Vehicle Networks
The Automotive Industry is constantly increasing the presence of technology in-vehicles. With sometime
more than a hundred separate control units in the modern vehicle, all generating more and more
applications for informing and entertaining the passengers. All these devices, connected with each
other, are constantly sending data to central computers or displays. Anritsu’s OTDR and GigE analyzers
are used for ensuring the high transmission rates in all points of the in-vehicle network.
Anritsu’s Site Master and Vector Network Analyzers will easily check the proper continuity of cables and
connectors.
MT9090A Network Master uOTDR
MS46122A USB Vector Network Analyzer
• High-end OTDR performance in a pocket-size package.
• World’s first series of compact VNAs from 1MHz to 40
GHz for cost-effective measurements.
• Exclusive, integrated launch fiber provides accurate
initial connector measurement without external devices.
• Bluetooth, Wi-Fi and Ethernet connectivity.
• Complete PON testing through splitters up to 1 x 64.
• High resolution and extremely short deadzones ensure
thorough short fiber evaluation.
• Complete fiber maintenance tool including optical
power meter and visible source “red light”.
The MT9090A is the right answer
for testing the growing optical
elements that form part of the car’s
communication
and
infotainment
systems. The increasing amount of
optical sensors in cars will require uncountable checks
of optical cables, connectors or splitters. The MT9090A
is the easiest and most comprehensive means of
completing these tests.
S331E Handheld Spectrum Analyzer
• Cable and Antenna Analyzer: 2 MHz – 4 GHz
• Return Loss, VSWR, Cable Loss, Distance-To-Fault,
Smith Chart, 1-Port Phase
• Field-proven design: Four-hour battery life, rugged,
compact, lightweight, daylight viewable display
• USB connectivity, built-in touch screen keyboard
• Intuitive menu-driven touch screen user interface
• PC control takes advantage of external computer
processing power and functionality.
• Compact 1U high package for efficient use of bench
and rack space.
• Time domain with time gating option grants easier and
faster fault identification.
Anritsu Shockline Compact VNA
MS46122A is the smallest, most
advanced 2-port VNA in the world.
The series benefits from patented shock line VNAon-chip technology, which simplifies the internal VNA
architecture at high frequencies, reduces instrument
cost, and enhances accuracy and measurement
repeatability. All the members of the MS46122A series
are low cost full-reversing 2-port VNAs aimed at RF and
microwave applications in manufacturing, engineering
and education. With 220 microseconds per point sweep
speed and better than 100 dB dynamic range they
are extremely suitable for a wide variety of device test
applications in the Automotive Industry, such as cable,
connectors (including FAKRA), antenna or radar.
Anritsu S331E SiteMaster Compact
Handheld Cable and Antenna Analyzer
can complete sweeps quickly, perform
calibrations instantly, and implement
fast trace naming while in the field.
Ideal product for Cable & Antenna Installation and
Maintenance in the automotive industry. Insertion Loss ,
2-port measurements of Amplifiers, duplexers, diplexers
or filters , Phase Matching Cables and Antenna Tuning
are relevant applications fitting into the upcoming invehicle networks.
MT1000A Network Master Pro
MT9090A Gigabit Ethernet Analyzer
• All-in-one field transport tester – supports testing from
1.5 Mbps to 10 Gbps.
• Versatile, purpose-built solution for Gigabit Ethernet
field testing.
• Traffic generation up to full line rate
• Comprehensive Ethernet testing for installation,
maintenance and troubleshooting.
• Ethernet Service Activation Test (Y.1564)
• Automated RFC 2544 tests of Throughput, Frame Loss,
Latency or Packet Jitter, Burstability
• BER tests – include Frame Loss and Sequence Error
tests
• Simultaneous monitoring in both line directions
• Ping test, traceroute test and Electrical cable
diagnostics.
• Two ports simultaneously work for shortening multiple
ports installation, including pass through test and in-line
monitoring test.
• IP Channel Statistics to identify error streams, top
talkers, network attacks
• Option for automated ITU-T Y.1564 testing,
simultaneously testing of multiple traffic streams
emulating real world networks.
• Frame capture for protocol analysis with Wireshark
• Option for automated RFC 2544 testing.
• Electrical cable tests and optical signal level displays
• Test Automator simplifies operation and ensure proper
set-up.
• Easy and intuitive GUI.
• Channel Stats option identifies error streams, top
talkers and network attack.
• Dual port at all rates.
• WLAN/Bluetooth/LAN connectivity.
• PDF and XML report generation for documentation of
test results.
• Remote operation and remote control (scripting).
Today’s in-vehicle communication
networks are becoming more and more
sophisticated as new technologies
like Ethernet is being fully deployed
alongside the entire car. The MT1000A
redefines the direction of future test platforms by
bringing network test requirements to a portable device,
making it the ideal tool for field testing.
• Service disruption time measurement to test the
performance of real-time applications.
For installation, commissioning and
quality verification the Network Master
Gigabit Ethernet tester provides
powerful and flexible traffic generation
capabilities, allowing you to easily
test the in-vehicle network under various conditions,
including generation of VLAN traffic. The instrument
also provides facilities for BER testing of the lines,
performance statistics and quality evaluation.
w ww.an rits u .com
Intelligent Transport System
ITS (Intelligent Transport Systems) refers to all types of communication inside or outside the vehicle. In
the connected car environment, there are several sensors that are communicating with other vehicles
and the road, including lanes and signals. Current applications, known as C2C (Car 2 Car), V2V (Vehicle
to Vehicle) or V2X (Vehicle to X) include radar and eCall, but this will increase in the next few years as
vehicles will be equipped with a higher number of sensors and driver aids.
Anritsu offers a complete set of instruments and compact software solutions to make M2M (Machine to
Machine) testing easy and in line with ITS standards, as well as 802.11p.
MD8475A
Signalling Tester
.
MS2830A Spectrum Analyzer
• Supports multimode terminals and all cellular standards,
including LTE (2x2 MIMO), LTE-Advanced (Carrier
Aggregation).
• 9 kHz to 26.5/43 GHz frequency range.
• SmartStudio GUI supports easy setup of test
environments and functional tests.
• Automated mobile terminal verification testing with test
sequences.
• Built-in PC with control and application server functions
reduces benchtop footprint.
The MD8475A is an all-in-one base
station simulator supporting all
cellular standards and M2M specific
applications. It supports services as
eCall, IMS, VoLTE, WLAN off-load tests
and call-processing tests for smartphones which are now
present on vehicles. In addition, the time required to
configure a test environment is greatly reduced by the
easy-to-use GUI-based SmartStudio software, as well as
supplied test sequences for automatic remote control of
the GUI. All this will make V2V testing easy, quick and
reliable.
• For wideband down-converter; built-in 1 GHz IF output
band.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement.
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A can be used for testing
of 2G, 3G, LTE and LTE-Advanced
signals on a vehicle-to-vehicle or
vehicle-to-x test environment. It
supports measurement of modulation
and Tx characteristics, including adjacent channel
leakage power and spectrum mask as well as spurious
measurements requiring a wide dynamic range. The
capture and replay function can be used to better
compare the real world effects with simulated designs
and performance, which will ensure the product quality.
MT8870A Universal Wireless Tester
• Designed for mass production of wireless modules, it
operates in a non-signalling environment for minimum
test time per unit.
• Supports all wireless standards, including cellular, SRW,
navigation and broadcast.
• Modular design with up to 16 high performance RF
ports in one small chassis.
• Built-in signal generator and signal analyser on each
module. Wide frequency range from 10 MHz to 6 GHz
and 160 MHz measurement bandwidth for 802.11ac,
LTE-Advanced and future standards.
The MT8870A is the best solution for
testing at R&D and production stages
of all M2M, V2V, V2X technologies.
It is ideal not only for production,
where it can make fast measurements,
including calibration, validation and tests according to
the relevant standards, but it also includes CombiView
which is ideal for R&D and troubleshooting. And it is
prepared for future standards due without additional
hardware improvements, thanks to its wide frequency
operating range and 160 MHz measurement bandwidth.
w ww.an rits u .com
Electromagnetic Interference
Anritsu offers a full set of instruments for electromagnetic compatibility (EMC).
Where different
technologies are simultaneously operating in public frequency bands thorough EMC and EMI testing are
of vital importance.
Electromagnetic interference (EMI) testing is a must before launching a product into the real wireless
world. Spectrum Analyzers, near field probes and handhelds from Anritsu will ensure your product is
compatible with the standards.
MS2720T Series Handheld Spectrum Analyzer
MS2711E Series Handheld Spectrum Analyzer
• Five options offering 9 kHz to 9, 13, 20, 32 & 43 GHz.
• Spectrum Analyzer: 9 kHz to 3 GHz.
• Internal Atomic Clock option for the ultimate in
handheld frequency accuracy.
• Interference Analyzer with Interference Mapping.
• Measurements: Occupied Bandwidth, Channel Power,
ACPR, C/I, Emission Mask, Field Strength, Interference
Analyzer: Spectrogram, Signal Strength, RSSI, Mapping.
• High Accuracy Power Meter.
• Channel Scanner, GPS, AM/FM/PM Analyzer.
• Tracking Generator: 500 kHz to 3.0 GHz.
• Tracking Generator up to 20 GHz.
• Field-proven design: Three-hour battery life, rugged,
compact, lightweight, daylight viewable display.
Spectrum Master MS2720T is a
multifunctional tool ideal for EMC/EMI
testing in automotive environments.
From Transmitter Spectrum Analysis
to Received Signal Analysis, where
location and identification of in-band
interference and out-of-band spurios signals need to
be tested, MS2720T is ideal. Also perfect for Signal
Strength Mapping in order to determine the most
suitable location for antennas in the car or AM & FM
analog proofing measurements. The two-port front end
with tracking generator function allows the measurement
of filters, attenuators, amplifiers and cables inside the
car.
MS2711E can reach almost the
same range of applications than its
bigger brother MS2720T. Its overall
performance is more than enough
whether you are performing complex
interference analysis or assessing signal
quality. The MS2711E Spectrum Master delivers ease
of use, rich functionality, and the best-in-class price/
performance you’ve come to expect from Anritsu.
MT8820C Radio Communications Analyzer
MS2830A Spectrum Analyzer
• Supports evaluation of RF TRx characteristics.
• 9 kHz to 26.5/43 GHz frequency range; 43 GHz max.
built-in pre-amp option.
• RF tests for LTE-Advanced DL CA, LTE and 2G/3G
terminals.
• Supports both call processing and non-call processing
modes.
• Batch measurements for key measurement items for RF
Tx tests.
The MT8820C supports high-speed
batch measurements of RF TRx
characteristics and call connection
tests for LTE-Advanced, LTE and
2G/3G mobile modules that could
be integrated into the car’s communication system.
The MT8820C is also extremely suited to Over-the-Air
(OTA) environments for EMC testing, being perfectly
applicable in automotive, where the chassis effect over
the multiple antennas integrated in the car must comply
with strict regulations.
• Best-of-class wide dynamic range over 6 GHz.
• Supports Noise Figure and BER measurement (options).
• Excellent eco-friendly product with low power
consumption of 190 VA min.
The MS2830A supports measurements
of Tx characteristics, including adjacent
channel leakage power, spectrum
mask, and frequency counter, as well
as spurious measurements requiring a
wide dynamic range. It offers an EMI
measurement detection mode and RBW configurations
used for CISPR standards.
w ww.an rits u .com
Specifications are subject to change without notice.
Anritsu Corporation
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan
Phone: +81-46-223-1111
Fax: +81-46-296-1238
• U.S.A.
Anritsu Company
1155 East Collins Blvd., Suite 100, Richardson,
TX 75081, U.S.A.
Toll Free: 1-800-267-4878
Phone: +1- 972-644-1777
Fax: +1-972-671-1877
• Canada
Anritsu Electronics Ltd.
700 Silver Seven Road, Suite 120, Kanata,
Ontario K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006
• Brazil
Anritsu Eletrônica Ltda.
Praça Amadeu Amaral, 27 - 1 Andar
01327-010 - Bela Vista - São Paulo - SP - Brasil
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940
• Mexico
Anritsu Company, S.A. de C.V.
• Italy
• India
Anritsu S.p.A.
Via Elio Vittorini 129, 00144 Roma, Italy
Phone: +39-6-509-9711
Fax: +39-6-502-2425
• Sweden
Anritsu AB
Borgarfjordsgatan 13A, 164 40 KISTA, Sweden
Phone: +46-8-534-707-00
Fax: +46-8-534-707-30
• Finland
Anritsu AB
Teknobulevardi 3-5, FI-01530 VANTAA, Finland
Phone: +358-20-741-8100
Fax: +358-20-741-8111
• Denmark
Anritsu A/S (Service Assurance)
Anritsu AB (Test & Measurement)
Kay Fiskers Plads 9, 2300 Copenhagen S, Denmark
Phone: +45-7211-2200
Fax: +45-7211-2210
• Russia
Anritsu EMEA Ltd.
Representation Office in Russia
Av. Ejército Nacional No. 579 Piso 9, Col. Granada
11520 México, D.F., México
Phone: +52-55-1101-2370
Fax: +52-55-5254-3147
Tverskaya str. 16/2, bld. 1, 7th floor.
Russia, 125009, Moscow
Phone: +7-495-363-1694
Fax: +7-495-935-8962
Anritsu EMEA Ltd.
Anritsu EMEA Ltd.
Dubai Liaison Office
• U.K.
200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.
Phone: +44-1582-433200
Fax: +44-1582-731303
• France
Anritsu S.A.
12 avenue du Québec, Bâtiment Iris 1- Silic 638,
91140 VILLEBON SUR YVETTE, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65
• Germany
Anritsu GmbH
Nemetschek Haus, Konrad-Zuse-Platz 1
81829 München, Germany
Phone: +49-89-442308-0
Fax: +49-89-442308-55
• United Arab E mirates
P O Box 500413 - Dubai Internet City
Al Thuraya Building, Tower 1, Suit 701, 7th Floor
Dubai, United Arab Emirates
Phone: +971-4-3670352
Fax: +971-4-3688460
• Singapore
Anritsu Pte. Ltd.
Anritsu Pte. Ltd.
India Branch Office
3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road,
HAL 3rd Stage, Bangalore - 560 075, India
Phone: +91-80-4058-1300
Fax: +91-80-4058-1301
• P.R. China (Hong Kong)
Anritsu Company Ltd.
Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,
No. 1 Science Museum Road, Tsim Sha Tsui East,
Kowloon, Hong Kong
Phone: +852-2301-4980
Fax: +852-2301-3545
• P.R. China (Beijing)
Anritsu Company Ltd.
Beijing Representative Office
Room 2008, Beijing Fortune Building,
No. 5, Dong-San-Huan Bei Road,
Chao-Yang District, Beijing 100004, P.R. China
Phone: +86-10-6590-9230
Fax: +86-10-6590-9235
• Korea
Anritsu Corporation, Ltd.
8F Hyunjuk Building, 832-41, Yeoksam Dong,
Kangnam-ku, Seoul, 135-080, Korea
Phone: +82-2-553-6603
Fax: +82-2-553-6604
• Australia
Anritsu Pty. Ltd.
Unit 21/270 Ferntree Gully Road, Notting Hill,
Victoria 3168, Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255
• Taiwan
Anritsu Company Inc.
7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan
Phone: +886-2-8751-1816
Fax: +886-2-8751-1817
60 Alexandra Terrace, #02-08, The Comtech (Lobby A)
Singapore 118502
Phone: +65-6282-2400
Fax: +65-6282-2533
Please contact:
Part Number ?????-???
Issue 1
11 /14
