Blast

Published on February 2017 | Categories: Documents | Downloads: 54 | Comments: 0 | Views: 822
of 3
Download PDF   Embed   Report

Comments

Content

When you create a part, it exists in its own coordinate system, independent of other parts in the model. In contrast, you use the Assembly module to create instances of your parts and to position the instances relative to each other in a global coordinate system, thus creating the assembly. You position part instances by sequentially applying position constraints that align selected faces, edges, or vertices or by applying simple translations and rotations. An instance maintains its association with the original part. If the geometry of a part changes, ABAQUS/CAE automatically updates all instances of the part to reflect these changes. You cannot edit the geometry of a part instance directly. A model can contain many parts, and a part can be instanced many times in the assembly; however, a model contains only one assembly. Loads, boundary conditions, fields, and meshes are all applied to the assembly. Even if your model consists of only a single part, you must still create an assembly that consists of just a single instance of that part. A part instance can be thought of as a representation of the original part. You can create either independent or dependent part instances. An independent instance is effectively a copy of the part. A dependent instance is only a pointer to the part, partition, or virtual topology; and as a result, you cannot mesh a dependent instance. However, you can mesh the original part from which the instance was derived, in which case ABAQUS/CAE applies the same mesh to each dependent instance of the part.

13.3.2 What is the difference between a dependent and an independent part instance?
When you create a part instance, you can choose to create either a dependent part instance or an independent part instance. You can also edit an instance and change it from dependent to independent or vice versa. Dependent part instances By default, ABAQUS/CAE creates a dependent instance of a part. A dependent instance is only a pointer to the original part. In effect, a dependent instance shares the geometry and the mesh of the original part. As a result, you can mesh the original part, but you cannot mesh a dependent instance. When you mesh the original part, ABAQUS/CAE applies the same mesh to all dependent instances of the part. Most modifications are not allowed on a dependent part instance; for example, you cannot add partitions or create virtual topology. However, operations that do not modify the geometry of a dependent part instance are still allowed; for example, you can create sets, apply loads and boundary conditions, and define connectors. If you have already meshed a part or added virtual topology to the part, you can create only a dependent instance of the part.

You cannot change the mesh attributes of an individual dependent part instance; for example, the mesh seeds, mesh controls, element types, and the mesh itself. However, you can change the mesh attributes of the original part, and ABAQUS/CAE propagates the changes to all dependent instances of the part. Although you have already meshed the original part and applied the same mesh to its dependent instances, the mesh is visible only in the Mesh module. You continue to work with the native ABAQUS/CAE geometry in the Assembly, Interaction, and Load modules. The advantages of dependent part instances are that they consume fewer memory resources and you need mesh the part only once. In addition, ABAQUS/CAE instances a dependent part instance in the input file by writing a single set of nodal coordinates and element connectivity to define the part along with a transform to define each part instance. Independent part instances In contrast, an independent part instance is a copy of the geometry of the original part. You cannot mesh a part from which you created an independent part instance; however, you can mesh the independent instance. In addition to meshing, you can perform most other operations on an independent instance; for example, you can add partitions and create virtual topology. The disadvantages of independent instances are that they consume more memory resources, and you must mesh each independent instance individually. In addition, ABAQUS/CAE does not take advantage of instantiation in the input file with independent part instances—sets of nodal coordinates and element connectivity are written to the input file for each independent part instance. You cannot create both a dependent and an independent instance of the same part. As a result, if you create a dependent instance of a part, all subsequent instances must be dependent. The same argument applies to independent instances. Instances of orphan mesh parts are always dependent. You can use the Model Tree to determine if an instance is dependent or independent. When you mesh an independent part instance, the mesh appears in the Model Tree under the part instance container, as shown in Figure 13–1. In addition, Figure 13–1 also illustrates that as you move the cursor over an instance, the information displayed by the Model Tree indicates whether the instance is dependent or independent. Figure 13–1 The Model Tree indicates whether a part instance is dependent or independent.

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close