Brochure AP Solutions PVD concept01.pdf
Content
Bi-flow pressure vents
TM
An AP Solutions product,
made in Great Brittain.
The all new high performance
PVD bi-flow range of “true”
two way chemical pressure
relief vents.
25 100 25
C (width)
D (height)
A
B
150
Vent size in mm
PVD150
PVD300
PVD500
PVD700
PVD1000
A
B
C
D
280
430
320
170
420
430
310
320
700
630
520
590
840
850
710
730
1135
1140
1010
1020
Unit weight
FVA @ M2 100Pa (both positive as negative)
Wall opening size
Unit finish
8kg
12kg
20kg
30kg
45kg
0.045
0.085
0.27
0.46
0.92
340Wx190H
345Wx345H
545Wx615H
745Wx745H
1050Wx1045H
Fire rating
4 Hours to BS476-20 and certified to E120 / EW120 to EN13501
RAL9016 White.
THE PVD BI-FLOW PRESSURE VENTS
The PVD range of pressure relief vents is a new development in the world of pressure relief vent for chemical agent gaseous extinguishing systems that
provides a greater efficiency factor of free vent area at all pressures than its competitors. The pressure vent blades start to open at above 70 Pascal’s in
either direction and are fully open at 100 Pascal’s pressure and can be calibrated using a Room Integrity Test Kit. The special design provides 92% free
vent area from 100 Pascal’s room pressure. This advance in chemical agent venting allows the vent to be fitted in any direction and the venting for both
negative and positive pressures is equal.
The range comes with a 4 hour fire rating to BS476 and certified to EW120 and E120 to EN1364-1 &2, which is verified by a independent consult. Reports
are available on request.
The PVD range is supplied in two kits; one for internal use and one for external use. The PVD vent only, is used for internal applications and with the addition of the L Reverse Louvre can be installed for external venting.
When mounting the PVD range in doors or narrow walls the external wall flange is used as a cover trim.
The standard sized above are available from stock and special sized are available on request and are on a 4 to 6 week lead time.
BuildingDoctorTM
PHONE:
EMAIL:
WEBSITE:
ADDRESS:
+31 (0) 522 282 941
[email protected]
www.buildingdoctor.eu
Hardermaat 12,
7244 PZ, Barchem,
Netherlands
BuildingDoctor DMCC
PHONE:
WEBSITE:
EMAIL:
PO BOX:
ADDRESS:
+971 (0) 455 17 140
www.buildingdoctor.ae
[email protected]
PO Box 37016, Dubai, UAE
Office 2807, JBC 1, Cluster G,
Jumeirah Lakes Towers,
Dubai, UAE
Official distributor for:
Retrotec airflow systems
Look Solutions fog machines
AP Solutions pressure vents
TM
10 reasons to choose for AP Solutions PVD’s
1
2
3
8
9
10
4 hour fire rated
One of the very few pressure vents with its’ full range fire rated for 4 hours.
90% free vent area
A number of live gas discharges and venting simulations have been carried out, which have been
verified independently to verify the free vent areas.
100mm flanges on PVD700 & 1000
To improve the installation and stability of the vents, the flange sizes have been
increased, with 60mm on the PVD150, 300 and 500 vents, and 100mm on the
PVD700 and 1000 vents.
positive
pressure
negative
pressure
4
5
6
7
Solid welded construction.
The PV, PVB and PVD vents have a solid welded construction which eliminates flexing and blades
sticking if installed incorrectly. The vents still work after dropping.
Aesthetically pleasing design
The vents are designed to blend in to the fabric of a risk. No rivets or fixings are visible and the unit
is powder coated in a white finish to blend in, but can be supplied in any colour.
Life time guarantee
All pressure vents have a life time guarantee.
Custom sized vents
Vents and louvres can be supplied in any specific size, or
colour, as well as in different materials such as stainless
steel.
Balanced weight vent
Allowing to set the opening pressure of the vent to the exact requirement.
High closed seal integrity -1%
The low leakage rates of the vents can be reduced even further by adding a
well sealed or insulated dynamic louvre.
UK Quality
All design and manufactering is carried out in the UK.
TM
An AP Solutions product,
made in Great Brittain.
The all new high performance
PVD bi-flow range of “true”
two way chemical pressure
relief vents.
25 100 25
C (width)
D (height)
A
B
150
Vent size in mm
PVD150
PVD300
PVD500
PVD700
PVD1000
A
B
C
D
280
430
320
170
420
430
310
320
700
630
520
590
840
850
710
730
1135
1140
1010
1020
Unit weight
FVA @ M2 100Pa (both positive as negative)
Wall opening size
Unit finish
8kg
12kg
20kg
30kg
45kg
0.045
0.085
0.27
0.46
0.92
340Wx190H
345Wx345H
545Wx615H
745Wx745H
1050Wx1045H
Fire rating
4 Hours to BS476-20 and certified to E120 / EW120 to EN13501
RAL9016 White.
THE PVD BI-FLOW PRESSURE VENTS
The PVD range of pressure relief vents is a new development in the world of pressure relief vent for chemical agent gaseous extinguishing systems that
provides a greater efficiency factor of free vent area at all pressures than its competitors. The pressure vent blades start to open at above 70 Pascal’s in
either direction and are fully open at 100 Pascal’s pressure and can be calibrated using a Room Integrity Test Kit. The special design provides 92% free
vent area from 100 Pascal’s room pressure. This advance in chemical agent venting allows the vent to be fitted in any direction and the venting for both
negative and positive pressures is equal.
The range comes with a 4 hour fire rating to BS476 and certified to EW120 and E120 to EN1364-1 &2, which is verified by a independent consult. Reports
are available on request.
The PVD range is supplied in two kits; one for internal use and one for external use. The PVD vent only, is used for internal applications and with the addition of the L Reverse Louvre can be installed for external venting.
When mounting the PVD range in doors or narrow walls the external wall flange is used as a cover trim.
The standard sized above are available from stock and special sized are available on request and are on a 4 to 6 week lead time.
BuildingDoctorTM
PHONE:
EMAIL:
WEBSITE:
ADDRESS:
+31 (0) 522 282 941
[email protected]
www.buildingdoctor.eu
Hardermaat 12,
7244 PZ, Barchem,
Netherlands
BuildingDoctor DMCC
PHONE:
WEBSITE:
EMAIL:
PO BOX:
ADDRESS:
+971 (0) 455 17 140
www.buildingdoctor.ae
[email protected]
PO Box 37016, Dubai, UAE
Office 2807, JBC 1, Cluster G,
Jumeirah Lakes Towers,
Dubai, UAE
Official distributor for:
Retrotec airflow systems
Look Solutions fog machines
AP Solutions pressure vents
TM
10 reasons to choose for AP Solutions PVD’s
1
2
3
8
9
10
4 hour fire rated
One of the very few pressure vents with its’ full range fire rated for 4 hours.
90% free vent area
A number of live gas discharges and venting simulations have been carried out, which have been
verified independently to verify the free vent areas.
100mm flanges on PVD700 & 1000
To improve the installation and stability of the vents, the flange sizes have been
increased, with 60mm on the PVD150, 300 and 500 vents, and 100mm on the
PVD700 and 1000 vents.
positive
pressure
negative
pressure
4
5
6
7
Solid welded construction.
The PV, PVB and PVD vents have a solid welded construction which eliminates flexing and blades
sticking if installed incorrectly. The vents still work after dropping.
Aesthetically pleasing design
The vents are designed to blend in to the fabric of a risk. No rivets or fixings are visible and the unit
is powder coated in a white finish to blend in, but can be supplied in any colour.
Life time guarantee
All pressure vents have a life time guarantee.
Custom sized vents
Vents and louvres can be supplied in any specific size, or
colour, as well as in different materials such as stainless
steel.
Balanced weight vent
Allowing to set the opening pressure of the vent to the exact requirement.
High closed seal integrity -1%
The low leakage rates of the vents can be reduced even further by adding a
well sealed or insulated dynamic louvre.
UK Quality
All design and manufactering is carried out in the UK.
