Celcom Broadband Connection Solutions
Content
CELCOM BROADBAND CONNECTION SOLUTIONS
If the connection is still failed, you need to do a manual connection. In brief, I try to explain it here:
From start menu go to Control Panel>Phone and Modem Options>Modem.
Please make sure your modem is listed here and it is attached to a valid COM port.
Highlight your modem and click properties> Diagnostic> Query Modem.
Please wait until the query modem instructions complete successfully.
Once success, then click advance and look for extra initialization command box and key in
+cgdcont=1,"ip","celcom3g"
Then press OK twice to exit the Phone and Modem Options section.
Under control panel choose Network connection and follow these steps:
Create a new connection.
a. Click Next
b. Select “Connect To The Internet” then Next
c. Select “Set up my connection manually” then Next
d. Select “Connect using a dial-up modem” then Next.
e. Check only the USB Modem (or whatever your modem brand is-if prompted).
f. Give the connection a name such as “Celcom Internet”, then Next.
g. On the next screen, key in the dial up number: *99#
h. Click Next.
i. On the next screen, key in username and password:
Username: blank
Password: blank
j. Clear all checkboxes (”Use…when anyone…” and “Make this the default…”)
k. Click Finish and clik on dial/connect
If the connection is still failed, you need to do a manual connection. In brief, I try to explain it here:
From start menu go to Control Panel>Phone and Modem Options>Modem.
Please make sure your modem is listed here and it is attached to a valid COM port.
Highlight your modem and click properties> Diagnostic> Query Modem.
Please wait until the query modem instructions complete successfully.
Once success, then click advance and look for extra initialization command box and key in
+cgdcont=1,"ip","celcom3g"
Then press OK twice to exit the Phone and Modem Options section.
Under control panel choose Network connection and follow these steps:
Create a new connection.
a. Click Next
b. Select “Connect To The Internet” then Next
c. Select “Set up my connection manually” then Next
d. Select “Connect using a dial-up modem” then Next.
e. Check only the USB Modem (or whatever your modem brand is-if prompted).
f. Give the connection a name such as “Celcom Internet”, then Next.
g. On the next screen, key in the dial up number: *99#
h. Click Next.
i. On the next screen, key in username and password:
Username: blank
Password: blank
j. Clear all checkboxes (”Use…when anyone…” and “Make this the default…”)
k. Click Finish and clik on dial/connect
