CONTENTS
Shop Directly from Dewalt's Catalog! Click on the links to navigate and on the outlined part numbers to purchased directly! All items are eligible for FREE SHIPPING!!!!!!!!!!!!!!
HEAVY-DUTY POWER TOOLS BACK TO INDEX
3-Speed Transmission Matches speed to the application for optimal performance DEWALT Built High Power, High Efficiency Motor Provides faster speed of application
Voltage Nailer Operating Mode Nailing Rate Nail Diameter/Type – 15 gauge DA type Magazine Angle/Capacity Nail Length Capacity Magazine Loading Integrated Belt Hook Tool Free Jam Clearing Tool Free Depth Adjustment Tool Weight
18V bump and sequential 4-5 nails/sec 15 Ga DA type gauge 34°/ 110 nails 1-1/4" - 2-1/2" rear - load Yes Yes Yes 8.9 lbs
Voltage No Load Speed Spindle Lock Spindle Thread Tool Weight Charger/Batteries Includes
36V 6,500 rpm Yes 5/8"-11 7.2 lbs 1 hour / (2) 36V Type 27 & Type 1 guards, wrench, matched flanges, Type 1 (cutting) wheel, side handle
18V 6,500 rpm Yes 5/8"-11 7.0 lbs 1 hour / (2) 18V XRPTM Type 27 & Type 1 guards, wrench, backing flange, Type 27 wheel, 3-position side handle
Tank Size Hose Diameter Hose Length Voltage (DC Operation) Blower Tool Weight Charger/Batteries Includes
2 gal 1-1/4" 5' 12-18V Yes 7.2 lbs Sold Separately 5' heavy-duty rubber hose, crevice tool and wide nozzle
1/2 gal 1-1/4" 2.5' 18V No 6.0 lbs 1 hour / (1) 18V XRPTM
< PREVIOUS
4
NEXT >
HEAVY-DUTY POWER TOOLS BACK TO INDEX
WORKSITE RADIO/CHARGER
SPECIFICATIONS
Worksite Radio/Charger
DC011
WORKLIGHT/ CHARGER
SPECIFICATIONS
Cordless/Corded Worklight/Dual Port Charger w/GFCI Protection
DC02218V 12-18V Batteries or AC Power 38W Fluorescent 2700 Lumens 1 Hour or less 1-hour on 18V DC9096 Battery 12.0 lbs Sold Separately
Power Source Radio Output AM/FM Digital Tuner Auxilary Port Charge Time Tool Weight
7.2V to 18V Battery or AC Power 92 dB Yes Yes 1 hour or less 13.2 lbs
Power Source Bulb Brightness Charge Time Run-Time Weight Batteries
FLUORESCENT AREA LIGHTS
SPECIFICATIONS
14.4V/12V Cordless 18V Cordless Fluorescent Area Light Fluorescent Area Light
DC527 DC528
360° side handle, carbide tipped circular saw blade, circular saw rip fence, reciprocating saw blade, jig saw baldes, type 1 and type 27 guards, wrench, backing flange, (1) type 1 wheel, 3-position side handle and (2) contractor bags
360° side handle, carbide tipped circular saw blade, circular saw rip fence, type 1 and type 27 guards, wrench, backing flange, (1) type 1 wheel, 3-position side handle, reciprocating saw blade and contractor bag
DW7231 – Workstation Tool Mounting Brackets (for DW723 only) DW7232 – Work Piece Support and Length Stop (for DW723 only)
TABLE SAWS
SPECIFICATIONS
10" Compact Job Site Table Saw
DW745
10" Job Site Table Saw
DW744X SPECIFICATIONS
10" Woodworker's Table Saw
DW746/DW746X
Amps No Load Speed Blade Diameter Arbor Size Dust Port Diameter Depth of Cut at 90° Depth of Cut at 45° Max Rip to Right of Blade Max Rip to Left of Blade Max Width of Dado Tool Weight Shipping SAW ACCESSORIES TABLE Weight DW7450 – Table Saw Stand (for DW745)
Horsepower No Load Speed Blade Diameter Arbor Size Dust Port Diameter Depth Of Cut At 90° Depth Of Cut At 45° Max Rip to Right of Blade Max Rip to Left of Blade Max Width of Dado Tool Weight
1-3/4 HP 3000 rpm 10" 5/8" 2-1/2" 3-1/8" 2-1/8" with DW7468: 30", with DW7464: 52" 16" 13/16" 254 lbs
DW7440 – Portable Table Saw Stand DW7441 – Out Feed and Side Support DW7444 – Dado Throat Plate
DW7460 – Mobile Base DW7461 – Sliding Table DW7462 – Cast Iron Extension Wing DW7463 – Out Feed Table
DW7464 – 52" Precision Fence Rail System DW7466 – Dado Throat Plate DW7468 – 30" Precision Fence Rail System DW7469 – Low Profile Fence Face Attachment
< PREVIOUS
8
NEXT >
HEAVY-DUTY POWER TOOLS BACK TO INDEX
Helical-cut steel, heat-treated gears for increased durability and long gear life Heavy-Duty 7.8 Amp Motor for increased jobsite durability 360° side handle for greater control and versatility
1/4" DRILLS
SPECIFICATIONS
1/4" (6mm) VSR Drill
DW217
Chuck Size Amps No Load Speed Max Watts Out Gear Reduction Capacity In Wood (Spade Bit) Capacity In Wood (Hole Saw) Capacity In Steel (Twist Bit) Tool Weight
1/4" 6.7 Amps 0-4,000 rpm 510 W Single 3/4" N/A 1/4" 3.2 lbs
Keyless Chuck Chuck Size Amps No Load Speed Max Watts Out Gear Reduction Capacity In Wood (Spade Bit) Capacity In Wood (Hole Saw) Capacity In Steel (Twist Bit) Tool Weight
N/A 3/8" 6.0 Amps 0-2,500 rpm 480 W Single 1" 1-1/8" 3/8" 3.2 lbs
Yes 3/8" 6.0 Amps 0-2,500 rpm 480 W Single 1" 1-1/8" 3/8" 3.5 lbs
Yes 3/8" 6.0 Amps 0-2,500 rpm 480 W Single 1" 1-1/8" 3/8" 3.5 lbs
Chuck Size Amps No Load Speed Max Watts Out Gear Reduction Capacity In Wood (Spade Bit) Capacity In Wood (Auger Bit) Capacity In Steel (Twist Bit) Capacity In Steel (Hole Saw) Tool Weight
Chuck Size Amps No Load Speed Max Watts Out Gear Reduction Capacity In Wood (Spade Bit) Capacity In Wood (Auger Bit) Capacity In Steel (Twist Bit) Capacity In Steel (Hole Saw) Tool Weight
D25300D–Rotary Hammer Dust Extraction for use with D25303, D25304, D25313, D25314 L-Shape SDS hammers D25300DH–HEPA Dust Extraction for same models as D25300D
SDS MAX/SPLINE HAMMERS
SPECIFICATIONS
1-9/16" SDS Max Combination Hammer
D25500K
1-3/4" SDS Max Combination Hammer
D25600K
1-7/8" SDS Max Combination Hammer with CTC
D25701K
2" SDS Max Combination Hammer with CTC
D25730K
1-9/16" Spline Combination Hammer
D25550K/D25551K
1-3/4" Spline Combination Hammer
D25650K
Concrete Drilling Impact Energy Amps No Load Speed Loaded Speed (bpm) Bit Lock Chipping Clutch Tool Length Tool Weight
Nail Diameter Nail Length Range Magazine Angle Magazine Capacity Magazine Loading Operating Pressure Depth Setting No Mar Pad Integrated Belt Hook Jam Clearing
Nail Diameter Nail Length Range Magazine Angle Magazine Capacity Magazine Loading Operating Pressure Depth Setting No Mar Pad Integrated Belt Hook Jam Clearing
Nail Style Magazine Angle Nail Length Range Nail Diameter Range Magazine Capacity Engine Type Jam Clearing Dry Fire Lockout Integrated Rafter Hook Depth Setting
Clipped Head 31° 2" - 3-1/2" .113"-.131" 80 nails Drop sleeve 5 mm or 3/16" Allen Key Required Yes No Tool Free
Clipped Head 31° 2" - 3-1/2" .113"-.131" 80 nails Drop sleeve Tool Free Yes Tool Free Tool Free
Full Round Head 20° 2" - 3-1/2" .113"-.148" 65 nails Drop sleeve 5mm or 3/16" Allen Key Required Yes No Tool Free
Full Round Head 20° 2" - 3-1/2" .113"-.148" 65 nails Drop sleeve Tool Free Yes Tool Free Tool Free
STAPLERS
SPECIFICATIONS
1" x 1/4" 18 Gauge Narrow Crown Stapler
D51420K
1-1/2" x 1/4" 18 Gauge Narrow Crown Stapler
D51422K
1" - 2" x 7/16" 16 Gauge Medium Crown Stapler
D51430
1" - 2" x 1/2" 16 Gauge Medium Crown Stapler
D51431
Nail Style Nail Diameter Range Nail Length Range Canister Capacity Operating Pressure Canister Loading Nose Piece Carbide Inserts Depth Setting Jam Clearing Steel Wear Guards
Coil Roofing .120" 3/4" - 1-3/4" 120 70-120 psi 2-door side load Yes Tool Free thumb wheel Integrated in nose door Yes
Top Load Panel with Tie Down Holes Allows unit to transport loads up to 100 lbs
Convenient Cord Wrap For easy storage
High Flow Regulator For increased performance Universal Quick Couplers To easily support multiple tools
OIL FREE – HAND CARRY
SPECIFICATIONS Oil Lubricated Pump with Cast Iron Cylinder Improves durability and life
1 Gallon, 135 PSI Max, Trim Compressor
D55140
2 Gallon, 150 PSI Max, Trim Compressor
D55141
Ball Drain Valve Allows for quick and thorough tank draining
10" Pneumatic Wheels and Collapsible Handle For ease of mobility
Horsepower Drive Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
0.3 continuous HP Direct drive 1.0 gal 120V, 60Hz, 2.6 amps .6 CFM 2,200 rpm 19.0" 14.5" 9.0" 24 lbs
0.6 continuous HP Belt 2.0 gal 120V, 60Hz, 10 amps 1.8 CFM 2,200 rpm 21.25" 19.0" 10.5" 30 lbs
OIL LUBE – HAND CARRY
SPECIFICATIONS
1.1 HP Continuous 4 Gallon 1.1 HP Continuous 4 Gallon 1.1 HP Continuous 4 Gallon Compressor w/Control Panel Electric Compressor Electric Compressor
D55151 D55152 D55153
1.2 HP Continuous 4 Gallon Single Tank Compressor
D55155
1.1 HP Continuous 4 Gal, Wheeled Compressor
D55154
Horsepower Drive Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
1.1 Continuous HP Direct drive 4 gal 120V AC 14 amps, 60 Hz, 3.2 CFM 3,400 rpm 18.5" 15" 16.75" 53.32 lbs
1.1 Continuous HP Direct drive 4 gal 120V AC, 15 amps, 60 Hz 3.8 CFM 3,400 rpm 18" 18" 16" 65 lbs
1.1 Continuous HP Direct drive 4 gal 120V AC, 15 amps, 60 Hz 3.8 CFM 3,400 rpm 18" 18.5" 16.75" 56.5 lbs
1.2 Continuous HP Direct drive 4 single ASME tank gal 120V AC, 15 amps, 60 Hz 4.5 CFM 3,400 rpm 21.75" 23" 12.5" 61 lbs
1.1 Continuous HP Direct drive 4 single ASME tank gal 120V AC, 15 amps, 60 Hz 3.8 CFM 3,400 rpm 22.0" 18.5" 23" 61 lbs
GAS – HAND CARRY
SPECIFICATIONS
4 HP 4 Gallon, Compressor with Control Panel
D55250
ELECTRIC – EHPTM PORTABLE
SPECIFICATIONS
4.5 Gallon, 200 PSI, Compressor w/Wheels
D55146
15 Gallon, 200 PSI, 120V Electric Workshop Compressor
D55168
Horsepower Drive Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
4 HP Direct Drive 4.0 gal Honda gas OHV GX engine 4.5 CFM 3,450 rpm 21.5" 17" 18.5" 68 lbs
Horsepower Drive Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
1.8 (running) HP Direct Drive 4.5 gal 120V AC 15 amps, 60 Hz 5.2 CFM 1,750 rpm 33.5" 15" 23" 85 lbs
1.8 continuous HP Belt Drive 15 gal 120V AC 15 amps, 60 Hz, 5.4 CFM 1,750 rpm 22.0" 44.75" 24.5" 92 lbs
GAS – WHEELED PORTABLE
SPECIFICATIONS
5.5 HP 8 Gallon, Wheeled Portable Compressor
D55270
Horsepower Drive Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
5.5 HP Belt Drive 8 gal Honda gas OHV GX engine 8.9 CFM 1,200 rpm 43" 18.25" 25" 160 lbs
5.5 HP Belt Drive 17 gal Honda gas OHV GX engine 8.9 CFM 1,200 rpm 43" 31.0" 20.25" 185 lbs
5.5 HP Belt Drive 10.5 gal Gas 10.3 CFM 1025 rpm 50" 24.2" 22.30" 185 lbs
8 HP Belt Drive 8 gal Honda gas OHV GX engine 16.2 CFM 890 rpm 43" 18.25" 27.75" 213 lbs
9 HP Belt Drive 17 gal Honda gas OHV GX engine 16.2 CFM 890 rpm 43" 20.25" 33.75" 238 lbs
< PREVIOUS
16
NEXT >
HEAVY-DUTY POWER TOOLS BACK TO INDEX
ELEC. – WHEELED PORTABLE
SPECIFICATIONS
1.5 HP 8 Gallon, Compressor
D55170
1.5 HP 8 Gallon, Compressor 2 HP 8 Gallon, Compressor 2 HP 17 Gallon, Compressor 3 HP 17 Gallon, Compressor w/Dual Voltage & Dual Control w/Dual Voltage & Dual Control w/Dual Voltage & Dual Control with Dual Control
D55570 D55580 D55585 D55395
Drive Horsepower Tank Size Power Supply CFM @100 PSI Pump Speed Tool Length Tool Width Tool Height Tool Weight
Belt Drive 1.5 HP 8 gal 2 pole induction motor 6.5 CFM 900 rpm 43" 23.5" 18.25" 165 lbs
Belt Drive 1.5 HP 8 gal 2 pole induction motor 6.5 CFM 900 rpm 43" 23.5" 18.25" 168 lbs
Belt Drive 2 HP 8 gal 2 pole induction motor 8.4 CFM 1,070 rpm 43" 23.5" 18.25" 175 lbs
Belt Drive 2 HP 17 gal 2 pole induction motor 8.4 CFM 1,070 rpm 43" 29.75" 20.25" 201 lbs
Belt Drive 3 HP 17 gal 2 pole induction motor 230V only 13.8 CFM 800 rpm 43" 32" 20.25" 254 lbs
COMPRESSOR COMBO KITS
SPECIFICATIONS
2" Brad Nailer/1 Gal Compressor
D55140BN
Finish Nailer/Brad Nailer/Compressor
D55141FNBN
2" Brad Nailer/ Compressor
D55151BN
3-1/2" (90mm) 31° Clipped Head Framing Nailer/Compressor
D55153FC
3-1/2" (90mm) Round Head Framing Nailer/ Compressor
D55153FR
Compressor Max PSI Tank Size CFM @100 PSI Horsepower Power Supply Pump Type Nailer(s) Hose Accessories Tool Length Tool Width Tool Height Tool Weight
D55140 135 1.0 gal .6 CFM 0.3 continuous HP 120V, 60Hz, 2.6 amps, permanent magnet motor maintenance free D51238K (2" 18 gauge brad) 25' X 1/4" w/fittings nailer plug and kit box 19.0" 14.5" 9.0" 24 lbs
D55141 150 2.0 gal 1.8 CFM 0.6 continuous HP 120V, 60Hz, 8 amps, universal motor maintenance free D51256K (2-1/2" 16 gauge finish) D51236K (1-1/4" 18 gauge brad) 25' X 1/4" w/fittings nailer plugs & contractor bag 21.25" 19.0" 10.5" 30 lbs
D55151 125 4 gal 3.2 CFM 1.1 continuous HP 120V AC 14 amps, 60 Hz, 2 pole induction motor oil lubricated D51238K (2" 18 gauge brad) 25' X 1/4" w/fittings nailer plug and kit box 18.5" 15" 16.75" 53 lbs
D55153 125 4 gal 3.5 CFM 1.2 continuous HP 120V AC, 15 amps, 60 Hz, 2 pole induction motor oil lubricated D51823K (3-1/2" clipped head framing nailer) 50' X 3/8" w/fittings – 18" 18.5" 16.75" 56 lbs
D55153 125 4 gal 3.5 CFM 1.2 continuous HP 120V AC, 15 amps, 60 Hz, 2 pole induction motor oil lubricated D51845K (3-1/2" round head framing nailer) 50' X 3/8" w/fittings – 18" 18.5" 16.75" 56 lbs
GAS GENERATORS
SPECIFICATIONS
3000 Watt Gas Generator
DG3000
4400 Watt Gas Generator
DG4400B
6300 Watt Gas Generator
DG6300B
7000 Watt Gas Generator
DG7000B
Max AC Output (W) Rated AC Output (W) Surge Watts Alternator Type Excitation Phase Frequency (HZ) Rated Current (120V/240V) (A) Displacement 120V GFCI Receptacles (20 Amp) 120V DUPLEX Twist Locking Receptacle (20 Amp) NEMA (L5 – 20R) 120V Twist Locking Receptacle (30 Amp) NEMA (L5 – 30R) 120V/240V Twist Locking Receptacle (20 Amp) NEMA (L14 – 20R) 120V/240V Twist Locking Receptacle (30 Amp) NEMA (L14 – 30R) Tool Length Tool Width Tool Height Dry Weight (lbs) Starting System
3000 2920 9150 Brushless, 2-Pole Condensed Single 60 20 196 cc 1 1 No No No 23.6” 19.3” 20.5” 118 Recoil
4400 4180 15600 Brushless, 2-Pole Condensed Single 60 31.7/15.9 270 cc 2 No 1 1 No 28.0” 21.7” 21.5” 234 Recoil/Cordless Battery Start
6300 5950 18300 Brushless, 2-Pole Condensed Single 60 49.6/24.8 389 cc 2 No 2 No 1 28.0” 21.7” 21.5” 246 Recoil/Cordless Battery Start
7000 6550 21400 Brushless, 2-Pole Condensed Single 60 54.6/27.3 389 cc 2 No 2 No 1 28.0” 21.7” 21.5” 261 Recoil/Cordless Battery Start
9.6V-18V DEWALT Batteries 1/8 in 0, 10, 60, 250, & 800 rpm ±5 ° 200 (dia) ft 2000 (dia) ft IIIa (<5mW) @ 635nm 5.5 lbs same as DW077KI plus digital laser detector
9.6V-18V DEWALT Batteries 1/8 in 0, 10, 60, 250, & 800 rpm ±5 ° 200 (dia) ft 2000 (dia) ft IIIa (<5mW) @ 635nm 5.5 lbs same as DW077KD plus construction Tripod
9.6V-18V DEWALT Batteries 1/8 in 600 rpm ±5 ° 50 (dia) ft 2000 (dia) ft IIIa (<5mW) @ 635nm 5.5 lbs 1 hour charger, 14.4V battery, digital laser detector
Power Supply Accuracy per 100 ft. Indoor Visibility Range Range with Detector Rotation Speed Laser Class Protected Head Roll Bar / Bump Sensor Tool Weight Includes
3 D-Size Alkaline 3 D-Size Alkaline 9.6V-18V DEWALT Batteries 9.6V-18V DEWALT Batteries 3 D-Size Alkaline ± 1/4 in ± 1/4 in ± 1/4 in ± 1/4 in ± 1/4 in 200 (dia) ft 200 (dia) ft 200 (dia) ft 200 (dia) ft 200 (dia) ft 600 (dia) ft 600 (dia) ft 600 (dia) ft 600 (dia) ft 600 (dia) ft 0-600 rpm 0-600 rpm 0-600 rpm 0-600 rpm 0-600 rpm IIIa (<5mW) @ 635nm-650nm IIIa (<5mW) @ 635nm-650nm IIIa (<5mW) @ 635nm-650nm IIIa (<5mW) @ 635nm IIIa (<5mW) @ 635nm Yes Yes Yes Yes Yes Yes / Yes Yes / Yes Yes / Yes Yes / Yes Yes / Yes 6.6 lbs 6.6 lbs 8.9 lbs 8.9 lbs 6.6 lbs same as DW071K plus wall same as DW071KI plus digital laser target card 1 hour charger, 18V battery, same as DW073K plus digital mount and laser enhancement laser target card, laser laser detector and clamp laser detector and clamp glasses enhancement glasses
LASERS
SPECIFICATIONS
LaserChalkLineTM Self-Leveling Line Laser (Horizontal & Vertical)
DW087K
LaserChalkLineTM Self-Leveling Line Laser (Horizontal only)
DW086K
Leveling Type Manual Manual Auto Accuracy per 100 ft. ±1/4 in ±1/4 in ±1/32 in Magnification 20x 20x 26x Range 200 ft 200 ft 300 ft Stadia Ratio 1:100 1:100 1:100 Horizontal Circle Type Continuous Drive Continuous Drive Continuous Drive Each include an aluminum tripod w/quick adjust legs and 8' aluminum grade rod (feet-inches-eighths)
Accuracy per 25 ft. Operating range Operating Temperature Battery Life
+/- 1/8 in Up to 100' ft 0-45 °C 70 hrs
< PREVIOUS
18
NEXT >
HEAVY-DUTY POWER TOOLS
BACK TO INDEX 0°,
15°, 25°, 40° and Soap Dispensing Quick Connect Nozzles Provides efficient cleaning in all applications
75' x 3/8" Non-Marking Steel Braided Hose w/Quick Connectors Provides long life and abrasion resistance
PRESSURE WASHERS
SPECIFICATIONS General® Pump w/Easy Start For long life in high pressure applications Low Oil Shutoff Prevents engine damage
DP3900 Heavy-Duty Pressure Washer
DP3900
Honda 13 HP, OHV GX Engine 3750 PSI 4.0 GPM
Professional Spray Gun with Extension Wand Designed for comfort and control Industrial Grade Frame For strength and durability
12" All Terrain Wheels Allows easy transportation over rough terrain
Battery Type Battery Run Time Cellular Communication Location Technology
Lithium Ion (rechargeable) 4.4 Amp Hr approximately 4 wks Sprint PCS QUALCOMM gpsOne
Lithium Ion (rechargeable) Lithium Ion (rechargeable) and and 4 “D” Alkaline 3-volt lithium (non-rechargeable) 4.4 (Li-Ion) Amp Hr 4.4 Amp Hr approximately 12 wks approximately 4 wks Sprint PCS Sprint PCS QUALCOMM gpsOne QUALCOMM gpsOne
SITELOCK®
SPECIFICATIONS
Jobsite Security Portable Alarm System (Base Unit)
DS100
Alarm System Mounting Bracket
DS001
Wireless Frequency Range Sensor Capacity Cellular Radio Back-Up Communications Loudness Battery Cell Run-Time Charge Time at 100% Power Supply
900 MHz up to 2000 ft. Up to 48 and 6 Key Chain Remote Controls # 1.2 Watts Standard Telephone Line Siren 110 dBA 12.0V Valve Regulated Lead Acid over 8 on battery back-up hrs 12 hrs 16.5V AC Power
SITELOCK® SENSORS
SPECIFICATIONS
Container Sensor
DS350
Jobsite Security Cable Lock (12')
DS300
Indoor Motion Sensor - PIR
DS210
Door / Window Contact Sensor
DS220
Wireless Signal Key Chain Remote Booster (Repeater) Control
DS200 DS380
Jobsite Security Cable Lock
DS300B
Wireless Frequency Range Battery Cell Battery Life DS302 – 2' DS306 – 6' DS312 – 12' DS324 – 24'
900 MHz Up to 2000 ft. 3.0V Lithium 1-2 Yrs.
900 MHz Up to 2000 Ft. 3.0V Lithium 1-2 Yrs.
900 MHz Up to 2000 Ft. 3.0V Lithium 1-2 Yrs.
900 MHz Up to 2000 Ft. 3.0V Lithium 1-2 Yrs.
900 MHz Up to 2000 Ft. 3.0V Lithium 1-2 Yrs.
900 MHz Up to 2000 ft. Lithium-Ion 18 Hour Run Time