Laboratory Title: Analysis of BJT Amplifier Classes of Operation using Simulation and Actual Construction
Objectives:
1. To analyze a BJT Amplifier Classes Amplifier comprising of two capacitors (C) and resistors (R) and measure voltage drops and currents at different locations.
2. To theoretically calculate and verify the circuit using Ohm’s law and Kirchhoff’s law, which were learned in previous courses.
3. Determine the voltages (VE, VC, VB) with respect to the circuit common. Measure and verify the same using the simulation.
4. Determine if the output voltage is in-phase or out-of-phase with its input waveform.
Comments
Content
Laboratory Title: Analysis of BJT Amplifier Classes of Operation using Simulation and Actual Construction
Objectives:
1. To analyze a BJT Amplifier Classes Amplifier comprising of two capacitors (C) and resistors (R) and measure voltage drops and currents at different locations.
2. To theoretically calculate and verify the circuit using Ohm’s law and Kirchhoff’s law, which were learned in previous courses.
3. Determine the voltages (VE, VC, VB) with respect to the circuit common. Measure and verify the same using the simulation.
4. Determine if the output voltage is in-phase or out-of-phase with its input waveform.