ECET 340 Week 1 iLab LCDs and Keypad
Objectives: To begin to understand and use basic LCD and Keypad code separately and together to show the functionality of the microcontroller combined with these interfaces. Results: All code showed the functionality of how data and commands are sent to the LCD. How the polling process works so that we know when a key is pressed. Together these two were combined to show how to display what key is pressed on the LCD according to the look up table. Conclusions: This lab is a very good example of the beginnings of using the LCD and keypad devices injunction with the HSC12 microcontroller.
Content
Objectives:
To begin to understand and use basic LCD and Keypad code separately and together to show the functionality of the microcontroller combined with these interfaces.
Results:
All code showed the functionality of how data and commands are sent to the LCD. How the polling process works so that we know when a key is pressed. Together these two were combined to show how to display what key is pressed on the LCD according to the look up table.
Conclusions:
This lab is a very good example of the beginnings of using the LCD and keypad devices injunction with the HSC12 microcontroller.
