Mantis™
Active RFID Tags
303 MHz
®
Mission Critical Asset Tracking
The Mantis™-series 303 MHz asset tag is an active RFID (Radio
Frequency Identification) beacon device used to locate, track, and
identify assets. Paired with RF Code’s Mantis™ II readers, these tags
become integral components in highly scalable asset tracking
environments.
The Mantis™ tag’s modular design and low price allow it to be
employed in a wide variety of applications --- with a proven return on
investment. Our patented RF architecture allows for very high tag
density and enables customers to deploy aggressive asset tracking
initiatives without worrying about data loss.
The Mantis™ tag offers a long battery life, a small form factor and
robust data payloads. Through the use of connector or daughter cards,
Mantis™-series tags can be customized to support a broad range of
integrated sensors. The tags can also be programmed to emit two
beacon signals - one in stationary mode and an optional beacon that
transmits at a faster rate when in motion. While the standard beacon
continually transmits data related to the tagged objects, the
motion-activated beacon rate provides immediate notification of
objects that have been moved or tampered with. Mantis™ tags are
encased in a heat-reflective polycarbonate and are impact resistant,
splash resistant and temperature stable.
The companion Mantis™ II readers are used to detect and interpret the
radio frequency data emitted by each asset tag. Read ranges of more
than 1,000 feet can be achieved with optional antenna configurations.
Because all Mantis™ readers are compatible with both wired and
wireless networks, they can be rapidly and inexpensively integrated
into an organization’s IT infrastructure.
Mantis™ Benefits
• Small size and light weight.
• Low power consumption and long battery life.
• Available build-to-suit enclosures for specialty applications.
• High reader throughput allows large numbers of tags in the field.
• Supported by award-winning TAVIS™ data management platform.
• Adaptive form factor for custom co-development.
• Built-in sensor interface.
• Low cost.
Proven Enterprise Deployment
Work-in-Progress
Manufacturing
Access Control
Healthcare Asset Management
Maintenance Operations
Container Tracking
IT Asset Management
Utility Asset Management
Personnel Tracking
DATA SHEET 303 MHz Mantis™ Tag
Capabilities
Activation:
Motion, tamper and optional custom interface
Operating frequency:
303.825 MHz
Group code & tag ID code:
>1 trillion IDs
Typical transmission range:
300 ft
Field strength:
1.5 µW (EIRP)
Modulation:
ASK
Stability:
Saw stabilized
Physical Characteristics
Tag length:
1.74 in (44.20 mm)
Tag width:
.83 in (21.00 mm)
Tag height:
0.19 in (04.72 mm)
Tag weight:
.7 oz (19.84 g)
Case Dimensions
Case length:
2.44 in (61.98 mm)
Case width:
1.25 in (31.75 mm)
Case height:
0.40 in (10.16 mm)
Case weight (with tag):
1.20 oz (28.35 g)
Case:
Heat reflective polycarbonate
Durability:
Tough, impact resistant and temperature stable
Mounting options:
Tape, lanyard, asset strap, cable tie, magnet, screw
Environmental
Operating temperature:
-20° C to +70° C
Storage temperature:
-40° C to +80° C
Sealing:
Splash resistant or optional waterproof case
Power
Battery type:
Replaceable coin cell
Battery life:
>7 years
Battery life detail:
1 second motion / 12.5 second continuous beacon
intervals with 5% motion in a temperate environment
1250 S. Clearview Ave.
Mesa, AZ 85208 USA
Tel:
+1.480.969.2828
Fax: +1.480.969.6670
[email protected]
www.rfcode.com
Copyright ©2006 RF Code, Inc. All rights reserved. RF Code, the RF Code logo, Hybrid RFID Architecture, Mantis and TAVIS are
trademarks or registered trademarks of RF Code, Inc. in the United States and other countries. All other company trademarks are the
property of their respective owners. No part of this document may be reproduced, photocopied, stored on a retrieval system,
transmitted or translated into another language without the express written consent of RF Code, Inc. NO. DS MR303 01/2006