History
Content
==============================================================================
CIMCO Edit V6 History
==============================================================================
==============================================================================
NOTICE: Valid maintenance is required to install this download!
==============================================================================
Changes made to CIMCO Edit version 6.10.60
================================================================ 06/06/12 ==
NC-Base Changes
===============
- Fixed problem viewing/comparing with files on the import queue when
the 'Add associated files to the import queue' option is enabled.
Changes made to CIMCO Edit version 6.10.59
================================================================ 01/06/12 ==
NC-Base Changes
===============
- Fixed problem exporting program list in some cases.
Changes made to CIMCO Edit version 6.10.58
================================================================ 30/05/12 ==
NC-Base Changes
===============
- Fixed problem exporting program list in some cases.
Changes made to CIMCO Edit version 6.10.57
================================================================ 25/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.56
================================================================ 15/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.55
================================================================ 14/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.54
================================================================ 10/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.53
================================================================ 10/05/12 ==
NC-Base Changes
===============
- Fixed crash when selecting programs with more than >200 associated files
using MS SQL.
Changes made to CIMCO Edit version 6.10.52
================================================================ 06/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.51
================================================================ 20/04/12 ==
- Fixed problem using /lang=XX with some other command line options.
Changes made to CIMCO Edit version 6.10.50
================================================================ 18/04/12 ==
NC-Base Changes
===============
- Added option to set program info read-only when program is read-only.
Ref: Database/Setup/Server Settings/Set program info readonly
Changes made to CIMCO Edit version 6.10.49
================================================================ 09/04/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.48
================================================================ 28/03/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Added option to set associated files offline when deleting programs.
Ref: Database/Setup/Server Settings/Set associated files offline
- Rejected files are now moved to the "System\Deleted" folder.
Changes made to CIMCO Edit version 6.10.47
================================================================ 23/03/12 ==
NC-Base Changes
===============
- Fixed problem with incorrect files being rejected from the queue.
(Introduced in 6.10.35 - Critical bug).
- Fixed problem showing associated files on the import queue when
multiple programs is on the queue.
Changes made to CIMCO Edit version 6.10.46
================================================================ 23/03/12 ==
NC-Base Changes
===============
- Changed purge to perform a reject when searching the import queue.
Changes made to CIMCO Edit version 6.10.45
================================================================ 22/03/12 ==
- Added button to send selected lines.
- Updated Mazatrol viewer.
- Updated backplot.
- Fixed problem with overlapping characters when using ClearType(tm).
Changes made to CIMCO Edit version 6.10.44
================================================================ 19/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.43
================================================================ 17/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.42
================================================================ 09/03/12 ==
- Fixed problem when using Mazak M950 - M997 synchonization commands in
multi channel view.
Changes made to CIMCO Edit version 6.10.41
================================================================ 07/03/12 ==
- Added Mazak multi channel view configurations.
Changes made to CIMCO Edit version 6.10.40
================================================================ 07/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.39
================================================================ 04/03/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Fixed problem using log view compare button on sub-programs and
associated files.
- Fixed problem using log view restore button on sub-programs and
associated files.
- Fixed problem increasing file version when receiving a file identical
to the previous backup.
Changes made to CIMCO Edit version 6.10.38
================================================================ 01/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.37
================================================================ 01/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.36
================================================================ 29/02/12 ==
NC-Base Changes
===============
- Fixed crash when selecting programs with more than >200 associated files.
Changes made to CIMCO Edit version 6.10.35
================================================================ 20/02/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Changed autoimport to skip associated files when program is read-only
and "Do not overwrite Read-Only programs" is selected.
- Fixed problem rejecting sub-programs when rejecting main program.
Changes made to CIMCO Edit version 6.10.34
================================================================ 10/02/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Changed import queue to ignore un-changed program files.
- Fixed problem showing associated files on the import queue when
searching the queue.
Changes made to CIMCO Edit version 6.10.33
================================================================ 01/02/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.32
================================================================ 31/01/12 ==
- Fixed problem setting the file changed falg after closing a
multi channel view.
NC-Base Changes
===============
- Added support for extracting info from older Griffo binary headers.
- Fixed problem extracting info from Griffo binary headers.
Changes made to CIMCO Edit version 6.10.31
================================================================ 30/01/12 ==
CNC-Calc Changes
================
- Turning Roughing and Finish improved so there is now both axial and
radial plunge.
NC-Base Changes
===============
- Added support for exporting the program status when exporting
program lists.
- Fixed problem specifying name of program lists exported to excel.
Changes made to CIMCO Edit version 6.10.30
================================================================ 20/01/12 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.29
================================================================ 19/01/12 ==
NC-Base Changes
===============
- Fixed permission issue when adding programs using Drag'N'Drop.
Changes made to CIMCO Edit version 6.10.28
================================================================ 17/01/12 ==
- Updated Mazatrol viewer.
- Updated Heidenhain macros.
NC-Base Changes
===============
- Fixed problem changing program group when associated NC data was
located in main directory and a 'Other' directory was specified.
Changes made to CIMCO Edit version 6.10.27
================================================================ 30/12/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.26
================================================================ 28/12/11 ==
- Updated NC Assistant.
- Fixed problem using $USERNAME and $COMPUTERNAME in Macros/Machine
configuration path.
NC-Base Changes
===============
- Fixed problem associating file with multiple programs.
Changes made to CIMCO Edit version 6.10.25
================================================================ 15/12/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.24
================================================================ 13/12/11 ==
- Updated CNC-Calc.
- Fixed problem ignoring . or , in file compare. Introduced in 6.10.20.
Changes made to CIMCO Edit version 6.10.23
================================================================ 29/11/11 ==
- Updated backplot converters.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.22
================================================================ 25/11/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.21
================================================================ 20/11/11 ==
- Added option to reload files from the tab right click menu.
- Changed reloading of files modified outside the editor to ignore deleted
files.
- Updated backplot converters.
Changes made to CIMCO Edit version 6.10.20
================================================================ 17/11/11 ==
- Fixed problem ignoring . or , after last digit when
'Ignore Numeric Format' was selected in the file compare configuration.
Changes made to CIMCO Edit version 6.10.19
================================================================ 13/11/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.18
================================================================ 03/11/11 ==
- Updated backplot.
Changes made to CIMCO Edit version 6.10.17
================================================================ 31/10/11 ==
- Updated backplot.
Changes made to CIMCO Edit version 6.10.16
================================================================ 30/10/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.15
================================================================ 17/10/11 ==
NC-Base Changes
===============
- Fixed problem exporting file list after searching file descriptions
and contents.
Changes made to CIMCO Edit version 6.10.14
================================================================ 11/10/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.13
================================================================ 06/10/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.12
================================================================ 05/10/11 ==
- Updated Mazatrol viewer.
- Fixed problem generating toolpaths in CNC-Calc on some systems.
- Fixed toolpath statistics when using inch units.
NC-Base Changes
===============
- Added 'Yes to All' option when sending files.
- Fixed incorrect status names shown when prompting to change status.
- Fixed high database CPU utilization in some cases.
- Fixed problem specifying prefix/suffix for associated files.
- Fixed problem using 'Import Accept As'.
Changes made to CIMCO Edit version 6.10.11
================================================================ 16/09/11 ==
- Fixed backplot configuration for Mikron HSM 400U and Mikron HSM 600U.
NC-Base Changes
===============
- Fixed incorrect folder names for associated files when using customer
folders.
- Fixed incorrect status names when using custom defined status texts.
CNC-Calc Changes
================
- Fixed problem setting some colors.
- Fixed crash.
Changes made to CIMCO Edit version 6.10.10
================================================================ 14/09/11 ==
CNC-Calc Changes
================
- Added finishing toolpaths.
- Added turning stock limits.
- Improved turning support.
Changes made to CIMCO Edit version 6.10.09
================================================================ 31/08/11 ==
- Improved tool list display in the Mazatrol viewer.
- Fixed decimal problem for Mazak M2 in the Mazatrol viewer.
CNC-Calc Changes
================
- Fixed line/arc intersection problem.
Changes made to CIMCO Edit version 6.10.08
================================================================ 24/08/11 ==
- Updated tool data support for Mazak M32 and M640M in the Mazatrol
viewer.
NC-Base Changes
===============
- Changed import queue to show only auto imported or received files
after accepting/rejecting imported program.
Changes made to CIMCO Edit version 6.10.07
================================================================ 16/08/11 ==
- Added support for locking the DNC configuration with the editor
configuration password.
Ref: Global Setup/Plugins/Configuration Password
NC-Base Changes
===============
- Added name of machine that received file when searching the import queue.
- Fixed problem when searching import queue for files received by DNC
or auto import.
Changes made to CIMCO Edit version 6.10.06
================================================================ 13/08/11 ==
NC-Base Changes
===============
- Fixed problem with missing buttons when running NC-Base in minimal mode.
Changes made to CIMCO Edit version 6.10.05
================================================================ 12/08/11 ==
NC-Base Changes
===============
- Changed import queue only to show expanded list when a program
has multiple files on the queue.
- Fixed problem rejecting program files when multiple imports existed
for the same program in some cases.
Changes made to CIMCO Edit version 6.10.04
================================================================ 11/08/11 ==
NC-Base Changes
===============
- Further reduced user interface when running NC-Base in super minimal
mode.
Changes made to CIMCO Edit version 6.10.03
================================================================ 09/08/11 ==
NC-Base Changes
===============
- Fixed problem copying associated files in some cases.
Changes made to CIMCO Edit version 6.10.02
================================================================ 28/07/11 ==
- Fixed backplot display problem.
Changes made to CIMCO Edit version 6.10.01
================================================================ 27/07/11 ==
- Fixed problem showing multiple channel programs.
Changes made to CIMCO Edit version 6.01.65
================================================================ 26/07/11 ==
- Updated window title when viewing multiple channels in non-default
order.
NC-Base Changes
===============
- Improved performance when searching the import queue.
- Changed icon for new imported files on the import queue.
Changes made to CIMCO Edit version 6.01.64
================================================================ 22/07/11 ==
- Added option to specify the channel order when viewing multiple
channels.
- Fixed problem displaying Mazatrol in Japanese.
- Fixed problem with picture name not copied when copying macros.
Changes made to CIMCO Edit version 6.01.63
================================================================ 21/07/11 ==
NC-Base Changes
===============
- Added confirmation prompt before saving files in the database.
Changes made to CIMCO Edit version 6.01.62
================================================================ 20/07/11 ==
- Fixed backplot tool scaling issue.
Changes made to CIMCO Edit version 6.01.61
================================================================ 14/07/11 ==
- Added option to copy macros.
Changes made to CIMCO Edit version 6.01.60
================================================================ 13/07/11 ==
- Added $FILENAMENOEXT to macro variables.
Changes made to CIMCO Edit version 6.01.59
================================================================ 05/07/11 ==
- Updated Mazatrol viewer.
- Added Emco Mill output for CNC Calc.
Changes made to CIMCO Edit version 6.01.58
================================================================ 17/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.57
================================================================ 15/06/11 ==
NC-Base Changes
===============
- Added support for specifying status names for 'Imported', 'Running In',
'Updating', 'Ready', 'Checked', 'Approved', 'Updated', 'Check failed'
and 'Approval failed'.
Ref: Database/Setup/Server Settings/Status Text
Changes made to CIMCO Edit version 6.01.56
================================================================ 14/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.55
================================================================ 10/06/11 ==
NC-Base Changes
===============
- Fixed NC-Base performance issue. Introduced in 6.01.42.
Changes made to CIMCO Edit version 6.01.54
================================================================ 08/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.53
================================================================ 06/06/11 ==
NC-Base Changes
===============
- Changed 'Copy Program' to make a copy of associated files stored
in "field folders" or sub folders.
- Fixed problem with no backups created when replacing associated files
using Drag'n'Drop in some cases.
Changes made to CIMCO Edit version 6.01.52
================================================================ 02/06/11 ==
- Added support for Siemens (WAITM) multi channel view.
- Added support for specifying a synchonization point ID trigger in
the multi channel view.
NC-Base Changes
===============
- Changed NC-Base to move files to the program directory when changing
the file type of an associated file to 'NC Data'.
Changes made to CIMCO Edit version 6.01.51
================================================================ 26/05/11 ==
- Updated backplot converters.
- Updated CNC-Calc.
NC-Base Changes
===============
- Changed auto import to keep existing name when importing setup sheet/
tool list/memo file, and a file of a different type with the same name
existed.
- Fixed problem with import queue being cleared in some cases.
(Introduced in 6.01.35).
- Fixed problem searching queue for users without accept/reject
permissions.
- Fixed problem auto importing associated files when not importing the
main program file.
Changes made to CIMCO Edit version 6.01.50
================================================================ 13/05/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Updated NC-Base converter.
Changes made to CIMCO Edit version 6.01.49
================================================================ 09/05/11 ==
- Updated CNC-Calc.
- Fixed problem showing backplot on some systems.
Changes made to CIMCO Edit version 6.01.48
================================================================ 04/05/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.47
================================================================ 03/05/11 ==
- Updated CNC-Calc.
Changes made to CIMCO Edit version 6.01.46
================================================================ 19/04/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.45
================================================================ 15/04/11 ==
- Added setup icon to Editor toolbar.
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.44
================================================================ 12/04/11 ==
NC-Base Changes
===============
- Disabled support for previewing Word/Excel documents in the NC-Base
preview window on systems with incompatible Word/Excel installations.
Changes made to CIMCO Edit version 6.01.43
================================================================ 08/04/11 ==
NC-Base Changes
===============
- Fixed database high CPU problem. Introduced in 6.01.42.
Changes made to CIMCO Edit version 6.01.42
================================================================ 06/04/11 ==
- Updated CNC-Calc.
NC-Base Changes
===============
- Fixed problem with log not showing changes for associated files that
were linked to multiple programs.
Changes made to CIMCO Edit version 6.01.41
================================================================ 04/04/11 ==
- Updated Mazatrol viewer.
- Fixed R value displayed in the backplot when using diameter programming.
NC-Base Changes
===============
- Fixed problem creating database temp directory when upgrading from V5.
Changes made to CIMCO Edit version 6.01.40
================================================================ 01/04/11 ==
- Added separate Emco milling and turning backplot converter.
- Added toolpath statistics button to the backplot toolbar.
- Added Y UP / Z Front configuration to the backplot setup.
NC-Base Changes
===============
- Fixed problem deactivating 'Scan comments below toolname'.
Changes made to CIMCO Edit version 6.01.39
================================================================ 31/03/11 ==
- Added Emco backplot converter.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.01.38
================================================================ 30/03/11 ==
- Updated CNC-Calc.
NC-Base Changes
===============
- Fixed problem opening RTF files in an external editor.
Changes made to CIMCO Edit version 6.01.37
================================================================ 28/03/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Fixed problem using MS SQL with NC-Base (introduced in 6.01.35).
Changes made to CIMCO Edit version 6.01.36
================================================================ 24/03/11 ==
- Fixed problem with files being closed when selecting NC-Base tab when
ribbon bar was minimized.
NC-Base Changes
===============
- Added support for previewing Word/Excel documents in the NC-Base preview
window.
- Fixed problem with names of imported files not shown.
- Fixed problem setting the 'Add associated files to the import queue'
option in some cases.
Changes made to CIMCO Edit version 6.01.35
================================================================ 21/03/11 ==
- Updated backplot.
CNC-Calc Changes
================
- Fixed problem with circular pockets.
NC-Base Changes
===============
- Added option to place associated files on the import queue
Ref: Database/Setup/Server Settings/
Add associated files to the import queue
Changes made to CIMCO Edit version 6.01.34
================================================================ 09/03/11 ==
- Updated Mazatrol viewer.
- Updated CNC-Calc.
NC-Base Changes
===============
- Improved icons for files associated with external programs.
- Fixed problem deleting associated .pdf files.
Changes made to CIMCO Edit version 6.01.33
================================================================ 08/03/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.32
================================================================ 07/03/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Fixed problem deleting associated .pdf files.
- Fixed problem viewing PDF files.
(Introduced in 6.01.31).
Changes made to CIMCO Edit version 6.01.31
================================================================ 02/03/11 ==
NC-Base Changes
===============
- Fixed problem replacing PDF files after previewing them in the NC-Base
client.
Changes made to CIMCO Edit version 6.01.30
================================================================ 01/03/11 ==
NC-Base Changes
===============
- Added support for opening backups of associated documents
(Word, PDF's etc.) from the Restore dialog.
Changes made to CIMCO Edit version 6.01.29
================================================================ 01/03/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.28
================================================================ 28/02/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.27
================================================================ 25/02/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.26
================================================================ 24/02/11 ==
- Fixed problem with window title not always updating.
- Updated backplot radius compensation display.
Changes made to CIMCO Edit version 6.01.25
================================================================ 23/02/11 ==
- Updated backplot radius compensation display.
- Fixed problem showing NC-Assistant balloons when line numbers were
enabled.
Changes made to CIMCO Edit version 6.01.24
================================================================ 23/02/11 ==
NC-Base Changes
===============
- Added port name to additional DNC log entries.
- Fixed problem with associated file updates not logged correctly in some
cases.
- Fixed problem creating backups for associated files received by
DNC-Max.
Changes made to CIMCO Edit version 6.01.23
================================================================ 22/02/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Added option to export transfer limit.
Ref: Database/Setup/Server Settings/List Export/To File/Transfer Limit
Ref: Database/Setup/Server Settings/List Export/To Printer/Transfer Limit
Changes made to CIMCO Edit version 6.01.22
================================================================ 16/02/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.21
================================================================ 15/02/11 ==
- Added 'Find' buttons to the Backplot toolbar.
- Updated backplot radius compensation display.
- Fixed problem with macro graphics not moved when changing
'Type file path'.
Changes made to CIMCO Edit version 6.01.20
================================================================ 10/02/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.19
================================================================ 10/02/11 ==
- Fixed backplot problem.
Changes made to CIMCO Edit version 6.01.18
================================================================ 09/02/11 ==
- Updated backplot.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.01.17
================================================================ 09/02/11 ==
NC-Base Changes
===============
- Changed program status to 'Updated' when restoring a previous version.
Changes made to CIMCO Edit version 6.01.16
================================================================ 14/01/11 ==
NC-Base Changes
===============
- Fixed problem when adding a new program from an existing program file
using 'File Save As' and the filename was not changed.
Changes made to CIMCO Edit version 6.01.15
================================================================ 10/01/11 ==
- Updated translations.
Changes made to CIMCO Edit version 6.01.14
================================================================ 06/01/11 ==
NC-Base Changes
===============
- Fixed problem deleting pre-defined fields.
- Fixed problem sorting programs. (introduced in 6.01.13)
Changes made to CIMCO Edit version 6.01.13
================================================================ 03/01/11 ==
- Improved toolpath statistics function.
- Updated backplot converters.
- Fixed problem reading some Mazatrol ISO files.
NC-Base Changes
===============
- Fixed problem using custom SQL commands.
Changes made to CIMCO Edit version 6.01.12
================================================================ 21/12/10 ==
- Fixed problem selecting DNC port on the Transmission bar.
- Fixed crash when closing NC-Base file compare.
Changes made to CIMCO Edit version 6.01.11
================================================================ 20/12/10 ==
- Fixed crash when closing NC-Base file compare.
CNC-Calc Changes
================
- If no side cuts are taken the compensation type is always as selected.
Changes made to CIMCO Edit version 6.01.10
================================================================ 14/12/10 ==
- Added Upper case / Lower case functions.
- Added Mark/Delete range function.
- Updated Mazatrol viewer.
- Updated backplot converters.
- Fixed crash when selecting machine for DNC when advanced NC Functions
was disabled.
Changes made to CIMCO Edit version 6.01.09
================================================================ 08/12/10 ==
- Fixed problem using multi channel view of files with different types.
- Fixed problem using scroll wheel when backplot was open.
- Fixed problem saving empty lines when viewing files in multi channel
mode.
Changes made to CIMCO Edit version 6.01.08
================================================================ 26/11/10 ==
- Changed line numbers to show actual line number when viewing multiple
channels.
Changes made to CIMCO Edit version 6.01.07
================================================================ 24/11/10 ==
- Added additional default multi channel configurations.
- Fixed crash when starting multi channel view when not configured
correctly.
- Fixed problem synchronizing some file types.
- Fixed problem saving the 'Show line numbers' option.
NC-Base Changes
===============
- Fixed problem searching programs when using MS SQL.
Changes made to CIMCO Edit version 6.01.06
================================================================ 22/11/10 ==
- Fixed multi line comment issue.
Changes made to CIMCO Edit version 6.01.05
================================================================ 20/11/10 ==
- Fixed line number issue.
Changes made to CIMCO Edit version 6.01.04
================================================================ 19/11/10 ==
- Added option to specify number of decimals used in backplot etc.
Ref: Setup/File Types/Machine/Decimals
- Added current and total machining distance to the backplot status view.
- Added option to show line numbers.
Ref: Setup/General/Editor/Show line numbers
- Improved file compare when comparing files with changes inside
multi line comments.
- Fixed problem removing multi character block skips.
- Fixed problem adding block skips to lines containing ','
- Fixed problem renumbering Heidenhain files with multi line comments.
NC-Base Changes
===============
- Added support for searching file descriptions and memos.
Changes made to CIMCO Edit version 6.01.03
================================================================ 18/11/10 ==
NC-Base Changes
===============
- Added support for searching file names.
Ref: Database/Serup/Client Settings/Search Settings/
Disable filename search
- Added support for searching the content of files.
Ref: Database/Serup/Client Settings/Search Settings/
Disable file content search
- Removed save prompt when adding a modified program to the database.
Changes made to CIMCO Edit version 6.01.02
================================================================ 17/11/10 ==
- Added support for additional Fanuc style multi channel formats.
Changes made to CIMCO Edit version 6.01.01
================================================================ 12/11/10 ==
- Initial release.
NC-Base: 5.00.10
==============================================================================
CIMCO Integration I/S
==============================================================================
CIMCO Edit V6 History
==============================================================================
==============================================================================
NOTICE: Valid maintenance is required to install this download!
==============================================================================
Changes made to CIMCO Edit version 6.10.60
================================================================ 06/06/12 ==
NC-Base Changes
===============
- Fixed problem viewing/comparing with files on the import queue when
the 'Add associated files to the import queue' option is enabled.
Changes made to CIMCO Edit version 6.10.59
================================================================ 01/06/12 ==
NC-Base Changes
===============
- Fixed problem exporting program list in some cases.
Changes made to CIMCO Edit version 6.10.58
================================================================ 30/05/12 ==
NC-Base Changes
===============
- Fixed problem exporting program list in some cases.
Changes made to CIMCO Edit version 6.10.57
================================================================ 25/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.56
================================================================ 15/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.55
================================================================ 14/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.54
================================================================ 10/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.53
================================================================ 10/05/12 ==
NC-Base Changes
===============
- Fixed crash when selecting programs with more than >200 associated files
using MS SQL.
Changes made to CIMCO Edit version 6.10.52
================================================================ 06/05/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.51
================================================================ 20/04/12 ==
- Fixed problem using /lang=XX with some other command line options.
Changes made to CIMCO Edit version 6.10.50
================================================================ 18/04/12 ==
NC-Base Changes
===============
- Added option to set program info read-only when program is read-only.
Ref: Database/Setup/Server Settings/Set program info readonly
Changes made to CIMCO Edit version 6.10.49
================================================================ 09/04/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.48
================================================================ 28/03/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Added option to set associated files offline when deleting programs.
Ref: Database/Setup/Server Settings/Set associated files offline
- Rejected files are now moved to the "System\Deleted" folder.
Changes made to CIMCO Edit version 6.10.47
================================================================ 23/03/12 ==
NC-Base Changes
===============
- Fixed problem with incorrect files being rejected from the queue.
(Introduced in 6.10.35 - Critical bug).
- Fixed problem showing associated files on the import queue when
multiple programs is on the queue.
Changes made to CIMCO Edit version 6.10.46
================================================================ 23/03/12 ==
NC-Base Changes
===============
- Changed purge to perform a reject when searching the import queue.
Changes made to CIMCO Edit version 6.10.45
================================================================ 22/03/12 ==
- Added button to send selected lines.
- Updated Mazatrol viewer.
- Updated backplot.
- Fixed problem with overlapping characters when using ClearType(tm).
Changes made to CIMCO Edit version 6.10.44
================================================================ 19/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.43
================================================================ 17/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.42
================================================================ 09/03/12 ==
- Fixed problem when using Mazak M950 - M997 synchonization commands in
multi channel view.
Changes made to CIMCO Edit version 6.10.41
================================================================ 07/03/12 ==
- Added Mazak multi channel view configurations.
Changes made to CIMCO Edit version 6.10.40
================================================================ 07/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.39
================================================================ 04/03/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Fixed problem using log view compare button on sub-programs and
associated files.
- Fixed problem using log view restore button on sub-programs and
associated files.
- Fixed problem increasing file version when receiving a file identical
to the previous backup.
Changes made to CIMCO Edit version 6.10.38
================================================================ 01/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.37
================================================================ 01/03/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.36
================================================================ 29/02/12 ==
NC-Base Changes
===============
- Fixed crash when selecting programs with more than >200 associated files.
Changes made to CIMCO Edit version 6.10.35
================================================================ 20/02/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Changed autoimport to skip associated files when program is read-only
and "Do not overwrite Read-Only programs" is selected.
- Fixed problem rejecting sub-programs when rejecting main program.
Changes made to CIMCO Edit version 6.10.34
================================================================ 10/02/12 ==
- Updated Mazatrol viewer.
NC-Base Changes
===============
- Changed import queue to ignore un-changed program files.
- Fixed problem showing associated files on the import queue when
searching the queue.
Changes made to CIMCO Edit version 6.10.33
================================================================ 01/02/12 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.32
================================================================ 31/01/12 ==
- Fixed problem setting the file changed falg after closing a
multi channel view.
NC-Base Changes
===============
- Added support for extracting info from older Griffo binary headers.
- Fixed problem extracting info from Griffo binary headers.
Changes made to CIMCO Edit version 6.10.31
================================================================ 30/01/12 ==
CNC-Calc Changes
================
- Turning Roughing and Finish improved so there is now both axial and
radial plunge.
NC-Base Changes
===============
- Added support for exporting the program status when exporting
program lists.
- Fixed problem specifying name of program lists exported to excel.
Changes made to CIMCO Edit version 6.10.30
================================================================ 20/01/12 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.29
================================================================ 19/01/12 ==
NC-Base Changes
===============
- Fixed permission issue when adding programs using Drag'N'Drop.
Changes made to CIMCO Edit version 6.10.28
================================================================ 17/01/12 ==
- Updated Mazatrol viewer.
- Updated Heidenhain macros.
NC-Base Changes
===============
- Fixed problem changing program group when associated NC data was
located in main directory and a 'Other' directory was specified.
Changes made to CIMCO Edit version 6.10.27
================================================================ 30/12/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.26
================================================================ 28/12/11 ==
- Updated NC Assistant.
- Fixed problem using $USERNAME and $COMPUTERNAME in Macros/Machine
configuration path.
NC-Base Changes
===============
- Fixed problem associating file with multiple programs.
Changes made to CIMCO Edit version 6.10.25
================================================================ 15/12/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.24
================================================================ 13/12/11 ==
- Updated CNC-Calc.
- Fixed problem ignoring . or , in file compare. Introduced in 6.10.20.
Changes made to CIMCO Edit version 6.10.23
================================================================ 29/11/11 ==
- Updated backplot converters.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.22
================================================================ 25/11/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.21
================================================================ 20/11/11 ==
- Added option to reload files from the tab right click menu.
- Changed reloading of files modified outside the editor to ignore deleted
files.
- Updated backplot converters.
Changes made to CIMCO Edit version 6.10.20
================================================================ 17/11/11 ==
- Fixed problem ignoring . or , after last digit when
'Ignore Numeric Format' was selected in the file compare configuration.
Changes made to CIMCO Edit version 6.10.19
================================================================ 13/11/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.18
================================================================ 03/11/11 ==
- Updated backplot.
Changes made to CIMCO Edit version 6.10.17
================================================================ 31/10/11 ==
- Updated backplot.
Changes made to CIMCO Edit version 6.10.16
================================================================ 30/10/11 ==
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.10.15
================================================================ 17/10/11 ==
NC-Base Changes
===============
- Fixed problem exporting file list after searching file descriptions
and contents.
Changes made to CIMCO Edit version 6.10.14
================================================================ 11/10/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.13
================================================================ 06/10/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.10.12
================================================================ 05/10/11 ==
- Updated Mazatrol viewer.
- Fixed problem generating toolpaths in CNC-Calc on some systems.
- Fixed toolpath statistics when using inch units.
NC-Base Changes
===============
- Added 'Yes to All' option when sending files.
- Fixed incorrect status names shown when prompting to change status.
- Fixed high database CPU utilization in some cases.
- Fixed problem specifying prefix/suffix for associated files.
- Fixed problem using 'Import Accept As'.
Changes made to CIMCO Edit version 6.10.11
================================================================ 16/09/11 ==
- Fixed backplot configuration for Mikron HSM 400U and Mikron HSM 600U.
NC-Base Changes
===============
- Fixed incorrect folder names for associated files when using customer
folders.
- Fixed incorrect status names when using custom defined status texts.
CNC-Calc Changes
================
- Fixed problem setting some colors.
- Fixed crash.
Changes made to CIMCO Edit version 6.10.10
================================================================ 14/09/11 ==
CNC-Calc Changes
================
- Added finishing toolpaths.
- Added turning stock limits.
- Improved turning support.
Changes made to CIMCO Edit version 6.10.09
================================================================ 31/08/11 ==
- Improved tool list display in the Mazatrol viewer.
- Fixed decimal problem for Mazak M2 in the Mazatrol viewer.
CNC-Calc Changes
================
- Fixed line/arc intersection problem.
Changes made to CIMCO Edit version 6.10.08
================================================================ 24/08/11 ==
- Updated tool data support for Mazak M32 and M640M in the Mazatrol
viewer.
NC-Base Changes
===============
- Changed import queue to show only auto imported or received files
after accepting/rejecting imported program.
Changes made to CIMCO Edit version 6.10.07
================================================================ 16/08/11 ==
- Added support for locking the DNC configuration with the editor
configuration password.
Ref: Global Setup/Plugins/Configuration Password
NC-Base Changes
===============
- Added name of machine that received file when searching the import queue.
- Fixed problem when searching import queue for files received by DNC
or auto import.
Changes made to CIMCO Edit version 6.10.06
================================================================ 13/08/11 ==
NC-Base Changes
===============
- Fixed problem with missing buttons when running NC-Base in minimal mode.
Changes made to CIMCO Edit version 6.10.05
================================================================ 12/08/11 ==
NC-Base Changes
===============
- Changed import queue only to show expanded list when a program
has multiple files on the queue.
- Fixed problem rejecting program files when multiple imports existed
for the same program in some cases.
Changes made to CIMCO Edit version 6.10.04
================================================================ 11/08/11 ==
NC-Base Changes
===============
- Further reduced user interface when running NC-Base in super minimal
mode.
Changes made to CIMCO Edit version 6.10.03
================================================================ 09/08/11 ==
NC-Base Changes
===============
- Fixed problem copying associated files in some cases.
Changes made to CIMCO Edit version 6.10.02
================================================================ 28/07/11 ==
- Fixed backplot display problem.
Changes made to CIMCO Edit version 6.10.01
================================================================ 27/07/11 ==
- Fixed problem showing multiple channel programs.
Changes made to CIMCO Edit version 6.01.65
================================================================ 26/07/11 ==
- Updated window title when viewing multiple channels in non-default
order.
NC-Base Changes
===============
- Improved performance when searching the import queue.
- Changed icon for new imported files on the import queue.
Changes made to CIMCO Edit version 6.01.64
================================================================ 22/07/11 ==
- Added option to specify the channel order when viewing multiple
channels.
- Fixed problem displaying Mazatrol in Japanese.
- Fixed problem with picture name not copied when copying macros.
Changes made to CIMCO Edit version 6.01.63
================================================================ 21/07/11 ==
NC-Base Changes
===============
- Added confirmation prompt before saving files in the database.
Changes made to CIMCO Edit version 6.01.62
================================================================ 20/07/11 ==
- Fixed backplot tool scaling issue.
Changes made to CIMCO Edit version 6.01.61
================================================================ 14/07/11 ==
- Added option to copy macros.
Changes made to CIMCO Edit version 6.01.60
================================================================ 13/07/11 ==
- Added $FILENAMENOEXT to macro variables.
Changes made to CIMCO Edit version 6.01.59
================================================================ 05/07/11 ==
- Updated Mazatrol viewer.
- Added Emco Mill output for CNC Calc.
Changes made to CIMCO Edit version 6.01.58
================================================================ 17/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.57
================================================================ 15/06/11 ==
NC-Base Changes
===============
- Added support for specifying status names for 'Imported', 'Running In',
'Updating', 'Ready', 'Checked', 'Approved', 'Updated', 'Check failed'
and 'Approval failed'.
Ref: Database/Setup/Server Settings/Status Text
Changes made to CIMCO Edit version 6.01.56
================================================================ 14/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.55
================================================================ 10/06/11 ==
NC-Base Changes
===============
- Fixed NC-Base performance issue. Introduced in 6.01.42.
Changes made to CIMCO Edit version 6.01.54
================================================================ 08/06/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.53
================================================================ 06/06/11 ==
NC-Base Changes
===============
- Changed 'Copy Program' to make a copy of associated files stored
in "field folders" or sub folders.
- Fixed problem with no backups created when replacing associated files
using Drag'n'Drop in some cases.
Changes made to CIMCO Edit version 6.01.52
================================================================ 02/06/11 ==
- Added support for Siemens (WAITM) multi channel view.
- Added support for specifying a synchonization point ID trigger in
the multi channel view.
NC-Base Changes
===============
- Changed NC-Base to move files to the program directory when changing
the file type of an associated file to 'NC Data'.
Changes made to CIMCO Edit version 6.01.51
================================================================ 26/05/11 ==
- Updated backplot converters.
- Updated CNC-Calc.
NC-Base Changes
===============
- Changed auto import to keep existing name when importing setup sheet/
tool list/memo file, and a file of a different type with the same name
existed.
- Fixed problem with import queue being cleared in some cases.
(Introduced in 6.01.35).
- Fixed problem searching queue for users without accept/reject
permissions.
- Fixed problem auto importing associated files when not importing the
main program file.
Changes made to CIMCO Edit version 6.01.50
================================================================ 13/05/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Updated NC-Base converter.
Changes made to CIMCO Edit version 6.01.49
================================================================ 09/05/11 ==
- Updated CNC-Calc.
- Fixed problem showing backplot on some systems.
Changes made to CIMCO Edit version 6.01.48
================================================================ 04/05/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.47
================================================================ 03/05/11 ==
- Updated CNC-Calc.
Changes made to CIMCO Edit version 6.01.46
================================================================ 19/04/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.45
================================================================ 15/04/11 ==
- Added setup icon to Editor toolbar.
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.44
================================================================ 12/04/11 ==
NC-Base Changes
===============
- Disabled support for previewing Word/Excel documents in the NC-Base
preview window on systems with incompatible Word/Excel installations.
Changes made to CIMCO Edit version 6.01.43
================================================================ 08/04/11 ==
NC-Base Changes
===============
- Fixed database high CPU problem. Introduced in 6.01.42.
Changes made to CIMCO Edit version 6.01.42
================================================================ 06/04/11 ==
- Updated CNC-Calc.
NC-Base Changes
===============
- Fixed problem with log not showing changes for associated files that
were linked to multiple programs.
Changes made to CIMCO Edit version 6.01.41
================================================================ 04/04/11 ==
- Updated Mazatrol viewer.
- Fixed R value displayed in the backplot when using diameter programming.
NC-Base Changes
===============
- Fixed problem creating database temp directory when upgrading from V5.
Changes made to CIMCO Edit version 6.01.40
================================================================ 01/04/11 ==
- Added separate Emco milling and turning backplot converter.
- Added toolpath statistics button to the backplot toolbar.
- Added Y UP / Z Front configuration to the backplot setup.
NC-Base Changes
===============
- Fixed problem deactivating 'Scan comments below toolname'.
Changes made to CIMCO Edit version 6.01.39
================================================================ 31/03/11 ==
- Added Emco backplot converter.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.01.38
================================================================ 30/03/11 ==
- Updated CNC-Calc.
NC-Base Changes
===============
- Fixed problem opening RTF files in an external editor.
Changes made to CIMCO Edit version 6.01.37
================================================================ 28/03/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Fixed problem using MS SQL with NC-Base (introduced in 6.01.35).
Changes made to CIMCO Edit version 6.01.36
================================================================ 24/03/11 ==
- Fixed problem with files being closed when selecting NC-Base tab when
ribbon bar was minimized.
NC-Base Changes
===============
- Added support for previewing Word/Excel documents in the NC-Base preview
window.
- Fixed problem with names of imported files not shown.
- Fixed problem setting the 'Add associated files to the import queue'
option in some cases.
Changes made to CIMCO Edit version 6.01.35
================================================================ 21/03/11 ==
- Updated backplot.
CNC-Calc Changes
================
- Fixed problem with circular pockets.
NC-Base Changes
===============
- Added option to place associated files on the import queue
Ref: Database/Setup/Server Settings/
Add associated files to the import queue
Changes made to CIMCO Edit version 6.01.34
================================================================ 09/03/11 ==
- Updated Mazatrol viewer.
- Updated CNC-Calc.
NC-Base Changes
===============
- Improved icons for files associated with external programs.
- Fixed problem deleting associated .pdf files.
Changes made to CIMCO Edit version 6.01.33
================================================================ 08/03/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.32
================================================================ 07/03/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Fixed problem deleting associated .pdf files.
- Fixed problem viewing PDF files.
(Introduced in 6.01.31).
Changes made to CIMCO Edit version 6.01.31
================================================================ 02/03/11 ==
NC-Base Changes
===============
- Fixed problem replacing PDF files after previewing them in the NC-Base
client.
Changes made to CIMCO Edit version 6.01.30
================================================================ 01/03/11 ==
NC-Base Changes
===============
- Added support for opening backups of associated documents
(Word, PDF's etc.) from the Restore dialog.
Changes made to CIMCO Edit version 6.01.29
================================================================ 01/03/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.28
================================================================ 28/02/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.27
================================================================ 25/02/11 ==
- Backplot updated.
Changes made to CIMCO Edit version 6.01.26
================================================================ 24/02/11 ==
- Fixed problem with window title not always updating.
- Updated backplot radius compensation display.
Changes made to CIMCO Edit version 6.01.25
================================================================ 23/02/11 ==
- Updated backplot radius compensation display.
- Fixed problem showing NC-Assistant balloons when line numbers were
enabled.
Changes made to CIMCO Edit version 6.01.24
================================================================ 23/02/11 ==
NC-Base Changes
===============
- Added port name to additional DNC log entries.
- Fixed problem with associated file updates not logged correctly in some
cases.
- Fixed problem creating backups for associated files received by
DNC-Max.
Changes made to CIMCO Edit version 6.01.23
================================================================ 22/02/11 ==
- Updated backplot converters.
NC-Base Changes
===============
- Added option to export transfer limit.
Ref: Database/Setup/Server Settings/List Export/To File/Transfer Limit
Ref: Database/Setup/Server Settings/List Export/To Printer/Transfer Limit
Changes made to CIMCO Edit version 6.01.22
================================================================ 16/02/11 ==
- DNC-Max / MDC-Max Update.
Changes made to CIMCO Edit version 6.01.21
================================================================ 15/02/11 ==
- Added 'Find' buttons to the Backplot toolbar.
- Updated backplot radius compensation display.
- Fixed problem with macro graphics not moved when changing
'Type file path'.
Changes made to CIMCO Edit version 6.01.20
================================================================ 10/02/11 ==
- Updated backplot converters.
Changes made to CIMCO Edit version 6.01.19
================================================================ 10/02/11 ==
- Fixed backplot problem.
Changes made to CIMCO Edit version 6.01.18
================================================================ 09/02/11 ==
- Updated backplot.
- Updated Mazatrol viewer.
Changes made to CIMCO Edit version 6.01.17
================================================================ 09/02/11 ==
NC-Base Changes
===============
- Changed program status to 'Updated' when restoring a previous version.
Changes made to CIMCO Edit version 6.01.16
================================================================ 14/01/11 ==
NC-Base Changes
===============
- Fixed problem when adding a new program from an existing program file
using 'File Save As' and the filename was not changed.
Changes made to CIMCO Edit version 6.01.15
================================================================ 10/01/11 ==
- Updated translations.
Changes made to CIMCO Edit version 6.01.14
================================================================ 06/01/11 ==
NC-Base Changes
===============
- Fixed problem deleting pre-defined fields.
- Fixed problem sorting programs. (introduced in 6.01.13)
Changes made to CIMCO Edit version 6.01.13
================================================================ 03/01/11 ==
- Improved toolpath statistics function.
- Updated backplot converters.
- Fixed problem reading some Mazatrol ISO files.
NC-Base Changes
===============
- Fixed problem using custom SQL commands.
Changes made to CIMCO Edit version 6.01.12
================================================================ 21/12/10 ==
- Fixed problem selecting DNC port on the Transmission bar.
- Fixed crash when closing NC-Base file compare.
Changes made to CIMCO Edit version 6.01.11
================================================================ 20/12/10 ==
- Fixed crash when closing NC-Base file compare.
CNC-Calc Changes
================
- If no side cuts are taken the compensation type is always as selected.
Changes made to CIMCO Edit version 6.01.10
================================================================ 14/12/10 ==
- Added Upper case / Lower case functions.
- Added Mark/Delete range function.
- Updated Mazatrol viewer.
- Updated backplot converters.
- Fixed crash when selecting machine for DNC when advanced NC Functions
was disabled.
Changes made to CIMCO Edit version 6.01.09
================================================================ 08/12/10 ==
- Fixed problem using multi channel view of files with different types.
- Fixed problem using scroll wheel when backplot was open.
- Fixed problem saving empty lines when viewing files in multi channel
mode.
Changes made to CIMCO Edit version 6.01.08
================================================================ 26/11/10 ==
- Changed line numbers to show actual line number when viewing multiple
channels.
Changes made to CIMCO Edit version 6.01.07
================================================================ 24/11/10 ==
- Added additional default multi channel configurations.
- Fixed crash when starting multi channel view when not configured
correctly.
- Fixed problem synchronizing some file types.
- Fixed problem saving the 'Show line numbers' option.
NC-Base Changes
===============
- Fixed problem searching programs when using MS SQL.
Changes made to CIMCO Edit version 6.01.06
================================================================ 22/11/10 ==
- Fixed multi line comment issue.
Changes made to CIMCO Edit version 6.01.05
================================================================ 20/11/10 ==
- Fixed line number issue.
Changes made to CIMCO Edit version 6.01.04
================================================================ 19/11/10 ==
- Added option to specify number of decimals used in backplot etc.
Ref: Setup/File Types/Machine/Decimals
- Added current and total machining distance to the backplot status view.
- Added option to show line numbers.
Ref: Setup/General/Editor/Show line numbers
- Improved file compare when comparing files with changes inside
multi line comments.
- Fixed problem removing multi character block skips.
- Fixed problem adding block skips to lines containing ','
- Fixed problem renumbering Heidenhain files with multi line comments.
NC-Base Changes
===============
- Added support for searching file descriptions and memos.
Changes made to CIMCO Edit version 6.01.03
================================================================ 18/11/10 ==
NC-Base Changes
===============
- Added support for searching file names.
Ref: Database/Serup/Client Settings/Search Settings/
Disable filename search
- Added support for searching the content of files.
Ref: Database/Serup/Client Settings/Search Settings/
Disable file content search
- Removed save prompt when adding a modified program to the database.
Changes made to CIMCO Edit version 6.01.02
================================================================ 17/11/10 ==
- Added support for additional Fanuc style multi channel formats.
Changes made to CIMCO Edit version 6.01.01
================================================================ 12/11/10 ==
- Initial release.
NC-Base: 5.00.10
==============================================================================
CIMCO Integration I/S
==============================================================================
