Install

1.Install Autodesk Civil 3D 2.Use as Serial 666-69696969, 667-98989898, 400-45454545 .. or anything matching this template 3.Use as Product Key 237C1 4.Finish the installation & restart Autodesk Product 5.Before clicking on Activate You have 2 options : - a) Disable Your network Card, pull the network cable out or block with fire wall (this is just to disable online serial check) OR - b) Click on Activate and it will tell you that your serial is wrong, simply click on close et click on activate again. Choose option a or b. 6. Select I have an activation code from Autodesk 7.Once at the activation screen: start XFORCE Keygen 32bits version if you are installing a 32bits application and 64bits if you are installing a 64bits application. 8.Click on Mem Patch (you should see successfully patched) 9.Copy the request code into the keygen and press generate 10.Now copy the activation code back to the activation screen and click Next You have a fully registered autodesk product NO LAME DLL PATCHING .....

NB: 1.Make sure you are running the Keygen as administrator and with UAC off on Vist a or Windows7 but you have to anyway to install Adesk products.