Intelligent Building Automation
Content
Intelligent Building Automation
Aim of this project is to automate the important parts of building and increasing energy efficiency of building. Optimisation of energy efficiency in buildings means for us, only use energy when it is really required, only use the amount of energy actually require and apply the energy that is used with the highest possible efficiency. The required lighting intensity in the room is achieved by the continuous controlled action required to maintain a defined level of brightness. This will also reduce emission of excess CO2. We can also implement smoke detection, fire detection and can use water sprinklers to extinguish the fire. A temperature sensor is used to sense and control the air conditioning system, only when there is someone in the room. By using RFID system we can allow authorized person for parking their vehicle. Energy is saved with intelligent building control in comparison to
conventional technology.
Overall conclusion is this project demonstrates that potential savings in energy consumption in buildings through the combination of several functions are possible.
Aim of this project is to automate the important parts of building and increasing energy efficiency of building. Optimisation of energy efficiency in buildings means for us, only use energy when it is really required, only use the amount of energy actually require and apply the energy that is used with the highest possible efficiency. The required lighting intensity in the room is achieved by the continuous controlled action required to maintain a defined level of brightness. This will also reduce emission of excess CO2. We can also implement smoke detection, fire detection and can use water sprinklers to extinguish the fire. A temperature sensor is used to sense and control the air conditioning system, only when there is someone in the room. By using RFID system we can allow authorized person for parking their vehicle. Energy is saved with intelligent building control in comparison to
conventional technology.
Overall conclusion is this project demonstrates that potential savings in energy consumption in buildings through the combination of several functions are possible.
