Modernized Vechicle Control System With Alcohol Detection

MODERNIZED VECHICLE CONTROL SYSTEM WITH ALCOHOL
DETECTION
ABSTRACT
The main aim of this embedded application is to detect the alcohol drunken people. We are
developing an embedded kit which will be placed in a vehicle. Now, the vehicle will be under
the control of the kit .If any drunken person enter in to the vehicle it gives a buzzer sound
immediately , and now the car will be under the control of the hardware used.
We run the vehicle by using wireless communication i.e. from Control section acts as
transmitter! we are e"ecting the control signals, then the vehicle receives acts as receiver! the
signals, according to the signals it will give a alarm or buzzer. It aims at designing and e#ecuting
the vehicle controlling using $%. &y using the $% communication, whenever alcohol is detected
using the alcohol detector, the micro controller sends the information to the encoder and the
encoder encodes the values and is received by the $% Transmitter. $% $eceiver receives the
information from the $% Transmitter and decoder decodes the serial input and sends the output
to the micro controller and according to the information received by the micro controller the
robot will move in that particular direction. The robot movement is driven with the help of
'()*+ as driver IC.
The programming language used for developing the software to the microcontroller is
,mbedded-.ssembly. The /,I' cross compiler is used to edit, compile and debug this program.
0icro %lash programmer is used for burning the developed code on /eil in to the
microcontroller Chip. 1ere in our application we are using .T2)C34 microcontroller which
is %lash 5rogrammable IC. .T represents the .tmel Corporation represents C067 technology is
used for designing the IC.
MICRO CONTROLLER
HEART BEAT
ALCOHOL
BUZZER
VIBRATOR
POWER SIPPLY