Mold Cleaners Citra Cling Mold and Metal Cleaner • No chlorinated solvents
Mold & Metal Wipes CL
CL
• No chlorinated solvents
• No petroleum dis distillates tillates or glycol ethers
• Pre-saturated cleaning towels
• Clings to surfaces for maximum performance
• Quickly removes releases, grease, oil and more
• Water-based high density foam
• Replaces hazardous cleaning sol solutions utions
• Removes mold releas releases, es, dirt, oil and greases
Fast, convenient, pre-saturated sheets quickly clean almost
Citra Cling is an excellent cleaning agent that clings to even vertical surfaces. Superior clinging action allows for maximum cleaning. Water-based cleaner is safe to use on painted surfaces and plastic parts (pre-testing recommended).
any surface.* Use for preparing molds for production or storage; touch-up cleaning during production; surface prep prior to secondary operations; and general maintenance and all-purpose cleaning.
No. 46515 Net Wt. 15 oz.
No. 46370 Canister of 70 wipes No. 46301 Box of 50 single-wipe packets
Mold Cleaner Plus Degreaser 4
NEXGEN Cleaner
• No chlorinated solvents
• No chlorinated solvents
• Evaporates fast
*Pre-test on non-metal surfaces.
CL
CL
• Food-approved ssolvents olvents (GRAS)****
FA
• Leaves no residue
• Leaves no oily residue
Slide Mold Cleaner Plus Degreaser 4 contains no chlorinated solvents and provides a convenient method for removal of silicones, grease, oil and wax build-up on mold surfaces, etc. without the need for wiping. Ideal for cold molds, it leaves no residue so it cleans without wiping. It has a fast evaporating formulat formulation, ion, is non-conductive and non-abrasive.
• Meets tough health, safety, environmental regulations • High solvency for resins, poly polymers mers and dies
No. 46910 Net Wt. 10 oz. No. 46930 – 30 lb. aerosol cylinder No. 46905HB 5-gallon
No. 46410 Net Wt. 10 oz. 46401B 1-gallon 46405B 5-gallon 46455B 55-gallon
No. 46955HB 55-gallon
Mold & Metal Polish
On/Cycle Mold Cleaner
• No chlorinated solvents
• No chlorinated solvents
• Clean and restore surfaces, easily wipes on and off
• Use on warm molds at the press
FA
• Am multi-purpose ulti-purpose mold cleaner
• Brings surfaces to a high luster
extrusion, compression, and rim molding. No. 45210 10 ounce can No. 45202 1.76 ounce tube
CL
• Food-approved ssolvents olvents (GRAS)****
• Removes plate-out, oxidation and stains
Safely removes plate-out, oxidation and stains on fine tooling surfaces quickly and costeffectively. Ideal for all types of molds, dies and fixtures, it restores surface finish, while providing a high, luster sheen. The polish has proven effective on steel, stainless, aluminum, brass, bronze, beryllium, zinc, powdered metals and other materials used in injection, blow,
NEXGEN is the most extraordinary cleaning product available. Formulated purely from citrus & vegetable products, it is so much more than other “natural” cleaners. Use it for oil spill clean-up and remediation, dewaxing, removing mold release and degreasing.
• Will not stain aluminum CL
• No caustic or acidic compounds On/Cycle is the ideal mold cleaner for use while in production. It works on warm molds up to 150°F and easily removes releases, oils, greases and many resinous buildups before they can become a problem. Made from citrus oils, it destroys odors, leaving a pleasant orange scent.
No. 44212 Net Wt. 12 oz. 44201B 1-gallon 44205B 5-gallon 44255B 55-gallon
More cleaners on next page >
11
Mold Cleaners PC Polish Cleaner
Quick Mold Cleaner
• Also known as “Old Yellow”
• No chlorinated solvents CL
• Removes stains and mold deposits
• Cleans quickly without wiping
CL
• Conditions your mold for faster startups and improved release properties
• Recommended for use on molds at room temperature
• Protects as it cl cleans eans
Effectively cleans molds at room temperature without
• Particle ssize ize <5 microns Use PC on all metal molds to remove stains and discoloration. Formulated Formulated to be used on cold or warm injection molds, PC leaves a non-transfer non-transferring, ring, micron-thin film that reduces mold wear. Regular use of PC reduces the need for all types of internal and external release agents.
wiping. It removes silicones, grease, oil and wax build-up on mold surfaces, etc. It leaves no residue. Its fast-evaporating formulation helps maximize the productivity of your operation.
No. 40910H Net Wt. 10 oz. No. 40905B 5-gallon No. 40955B 55-gallon
No. 43310
Plastic Cleaner with Foamaction™
Resin Remover
• No chlorinated solvents • Just sspray pray and wipe
• No chlorinated solvents
CL
• The Stripper®
• Safe on all pl plastics astics
• Use to unclog mold vents
• Pleasant, fresh scent, contains no ammonia • Non-ammable, water water-based -based cleaner with low VOC’s
• Removes resi resin n build-up from polyacetals, PVC, urethanes and ame-retardant mold deposits
Foaming spray effectively removes oil and dirt marks from all plastics, even sensitive polycarbonate polycarbonates. s. Plastic Cleaner is ideal for cleaning plastic parts, and helps remove mold releases prior to secondary operations.
• Removes most color deposits Resin Remover’s powerful solvents remove resin build-up without needing to remove the mold, minimizing downtime and maximizing production. Resin Remover will remove, strip and/or aid in the removal of many resinous plastics.
No. 41515 Net Wt. 15 oz.
No. 41914 Net Wt. 14 oz. 41901B 1-gallon 41905B 5-gallon
Plastic Cleaner Wipes • No chlorinated solvents
41955B 55-gallon
• Convenient lilint-free, nt-free, disposable towelettes • Safe on all pl plastics astics
Silicone Remover
• Cleans without leaving lm or residue
CL
• Pleasant, fresh scent, contains no ammonia
• No chlorinated solvents
• Non-ammable, water water-based -based cleaner with low VOC’s
• Concentrate for use with water • Completely removes all traces of silicone oil from molded parts
Now get the power of Plastic Cleaner in convenient towelettes. They effectively remove oil and dirt marks from all plastics, even sensitive polycarbonates, polycarbonate s, and are ideal for cleaning plastic parts, and removing mold releases prior to secondary operations. Keep a tub at each workstation to help maximize productivity.
No. 41570 Canister of 70 wipes
12
CL
Silicone Remover is designed to replace organic solvents that are harmful to certain plastics, such as polycarbonates, styrenes and acrylics. A specially formulated wetting agent you mix with water, Silicone Remover removes silicone from molded plastic parts through repeated washing or by the use of an ultrasonic cleaning bath. CL
No. 43016 Net Wt. 16 oz.
Mold Cleaners / Lubricants Veri-Kleen • No chlorinated solvents • Contact and metal cl cleaner eaner
Silicone Spray Lube (SSL) has thousands of uses. For paper and film converters, it fights sticking and glue build-up problems. Use it on slitter knives, rollers, slide guides. For food processing, it eliminates sticky food buildup, speeds cleaning. Use it on heat sealers, ovens, guides, chutes, conveyors. For vertical blind manufacturing, manufacturi ng, it is an excellent lubricant for vertical blind tracks.
remover • Contains no ammable ingredients
Veri-Kleen dries quickly, leaving no residue on precision electrical equipment or parts. It is ideal for circuit boards, tape heads, motors and a variety of metal cleaning applications. Can be used safely on operating electrical equipment.
No. 42012A Net Wt. 12 oz.
Operating temperature: 600°F No. 42112N Net Wt. 12 oz.
Lubricants Super Grease Heavy-Duty Mold Release and Pin Lube CL
• No chlorinated solvents • Non-silicone • Paintable
• No chlorinated solvents • NSF-H1 (non-aerosol formulations)††
CL
• NLGI #2 high temperature range grease
FA
• Food-approved lubricant†(aerosol only) FA
• Colorless & odorless, ex excellent cellent dielectric strength
• Food-approved lubricant(*****)
• Contains PTFE, no si silicones licones
• Dry release m minimizes inimizes leaching out onto parts
• Will not bleed out; paintable
An ideal lubricant for the front half of ejector pins (pins in forward position), this almost dry lubricant minimizes the possibility of leaching out onto molded parts. Use in combination with application of Super Grease on back side of ejector pins. Stable at temperatures up to 450°F. Heavy-Duty Mold Release and Pin Lube can be used on plastics, rubber, waxes, glass-filled nylon and similar materials.
Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixotropic properties provide excellent mechanical stability when sudden temperature
Maximum Operating Temperature: 450°F. No. 54912 aerosol Net Wt. 11.5 oz. CL
Silicone Emulsion • No chlorinated solvents • Water-based silicone oil solution • Food-approved lubricant(++) 35% solids. Silicone emulsions are advantageouss for applications requiring advantageou
changes A clear, nonyellowingoccur. grease, Superclean, Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also repels water and prevents corrosion.
Operating temperatures: -45°F to +650°F No. 43911 Net Wt. 11 oz. No. 43900T 14 oz. tube for grease guns No. 43900-01 10-gram tube No. 43900-03 3 oz. tube No. 43900-7 7-lbs. No. 43900-35 35 lbs. No. 43900-400 400 lbs.
lubrication, gloss, antistatic, protective and release properties.
†Rating applies to aerosol formulation only. USDA H1 rating: For use in federally inspected meat and poultry plants.