Quick Installation
Content
460656001B.fm Page 1 Saturday, April 16, 2011 8:52 PM
4
Picture Perfect 4.0
Picture Perfect 4.0
7.
8.
9.
Install the base package by typing:
/media/cdrom/INSTALL -b <Enter>
Respond to the on screen prompts. For more detailed information and
assistance with table sizings or optional settings, please refer to the
Picture Perfect v4 Installation Manual.
When prompted, reboot the system. Unmount the CD and remove it
from the CD-ROM drive.
5. Set up the Picture Perfect client computer(s)
1.
2.
3.
4.
Open Internet Explorer and type in a URL to connect to the server:
http://<hostname>/Picture
Install Java:
Click the J2SE Java Runtime Environment (JRE) link on the Picture
Perfect webtop. Accept the defaults and click Next as required.
Specify Java Runtime Parameters:
Right-click the Java (coffee mug) icon on the right-hand side of the
Windows taskbar. Select Open Control Panel. Click the Advanced
tab. In the Java Runtime Parameters text box, enter a new memory
specification:
• If your workstation memory is 512, enter: -Xms192m -Xmx384m
• If your workstation memory is 1024 or above, enter:
-Xms384m -Xmx512m
Click Apply.
Disable Client JVM Automatic Updates:
Click the Update tab. Make sure that Check for Updates
Automatically is not selected.
6. Start Picture Perfect and log on
To ensure connectivity, from a Picture Perfect 4.0 client workstation,
perform the following steps:
1. Open Internet Explorer and type in a URL to connect to the server:
http://<hostname>/Picture
2. Log on as install.
Quick Installation
460656001B • April 2011
Copyright © 2011, UTC Fire & Security
This document provides basic instructions for typical new stand-alone
Picture Perfect installations. Refer to the Picture Perfect v4 Installation
Manual for detailed instructions.
• For custom installations, optional packages, or upgrades, refer to the
Picture Perfect v4 Installation Manual.
• For redundant systems, refer to the Picture Perfect 4.0 Redundant
Edition Installation Manual.
• For enterprise systems, refer to the Picture Perfect 4.0 Enterprise
Edition Installation Manual.
Note: PDF versions of these documents can be found on the Documentation CD.
Overview
Each step below is discussed in more detail in the sections that follow:
1. Meet software requirements on page 1
2. Meet hardware requirements on page 2
3. Install and configure the server operating system on page 2
4. Install Picture Perfect on page 2
5. Set up the Picture Perfect client computer(s) on page 4
6. Start Picture Perfect and log on on page 4
1. Meet software requirements
The following are recommended and supported configurations:
Server
Version
Kernel Level
Red Hat Enterprise Linux
(WS, ES, or AS)
4.0 Update 4 Required for Dell
840/2900/2950 servers
2.6.9-42
4.0
2.6.9-5.EL
IBM AIX
5L Version 5.3 Recommended
up to ML05
5L Version 5.2
up to ML08
Service Pack
Contacting Customer Support
Client
Version
You can reach customer support by phone 8 A.M. to 7 P.M. EST, Monday
through Friday.
United States: 1-888-437-3287
Asia: 65 639 19314
Australia: 61 3 9239 1200
EMEA: 48 58 326 22 40
Latin America: 503 885 5700
Windows Operating
System
2000 Professional
4 or later
XP Professional
2 or later
Browser
Internet Explorer 6.0
Firefox, Netscape Navigator, and Mozilla are not certified.
Note: Picture Perfect 4.0 Service Pack 1.5 supports Red Hat Linux 4.0 Update 4,
which is required for this application when used on Dell PowerEdge 840,
2900, and 2950 servers.
460656001B.fm Page 2 Saturday, April 16, 2011 8:52 PM
2 Picture Perfect 4.0
Quick Installation 3
2. Meet hardware requirements
4.
The following are the minimum, supported, configurations. Increased
memory and CPU will improve system performance.
Server
Minimum Client
Minimum
Intel based processor
or
pSeries 610 Server or
better
2.0 GHz
Intel based processor
2.0 GHz
RAM
1 GB
RAM
512 MB
Hard Drive
18 GB
Available Disk Space
100 MB
Network card
Network card
CD-ROM Drive
Java plug-in
1.4.2_13
Keyboard
Video card
Graphical Monitor
Mouse
3. Install and configure the server operating system
Make sure your server OS is installed and configured in accordance with
the instructions in the Picture Perfect v4 Installation Manual.
4. Install Picture Perfect
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read and accept the Picture Perfect license agreement and record the
number to obtain a license key from UTC Fire & Security Support.
Press Enter to proceed with the installation of additional AIX filesets.
When prompted, remove the Picture Perfect Installation CD and insert
the appropriate AIX CDs.
When prompted, insert the Picture Perfect Utilities CD, which contains
various packages, such as HTTP Server, Mozilla, and Java 1.4,
required to run Picture Perfect.
When prompted, remove the Picture Perfect Utilities CD, and insert
the appropriate AIX CD. When the installation is complete and any
updates applied, the system reboots.
Remove the AIX CD and insert the Picture Perfect Installation CD. If
necessary, mount the CD.
Change to the root directory:
cd /<Enter>
Install the base package by typing:
/mnt/INSTALL -b <Enter>
Respond to the on screen prompts. For more detailed information and
assistance with table sizings or optional settings, please refer to the
Picture Perfect v4 Installation Manual.
When prompted, reboot the system. Unmount the CD and remove it
from the CD-ROM drive.
IBM AIX
Red Hat Linux
The following CD sets are required:
• AIX 5L Operating System
• AIX 5L Expansion Pack
• AIX 5L Bonus Pack (Optional)
• AIX 5L Documentation
• AIX 5L Update
• Picture Perfect Version 4.0 Installation CD
• Picture Perfect v4 IBM AIX 5L Utilities CD
The following CD sets are required:
• Red Hat Linux 4.0 Operating System
• Picture Perfect Version 4.0 Installation CD
1. Log on to the system as the root user and open a new terminal
window.
2. Insert the Picture Perfect Installation CD into the CD-ROM drive and
when the CD-ROM light stops blinking, mount the CD.
mount /media/cdrom <Enter>
3. Install the Picture Perfect Linux filesets by typing:
/media/cdrom/INSTALL -u <Enter>
4. Read and accept the Picture Perfect license agreement and record the
number to obtain your license key from UTC Fire & Security Support.
5. When the installation is complete and any updates applied, the system
exits to the command prompt. Type reboot to reboot the system.
Note: These instructions assume a graphical terminal.
1.
2.
3.
Log on to the system as the root user and open a new terminal
window.
Insert the Picture Perfect Installation CD into the CD-ROM drive and
when the CD-ROM light stops blinking, mount the CD.
mount -v cdfrs -o ro /dev/cd0 /mnt <Enter>
Install the Picture Perfect AIX filesets by typing:
/mnt/INSTALL -u <Enter>
Note:
6.
The Picture Perfect Installation CD should still be in the CD-ROM.
Change to the root directory:
cd /<Enter>
4
Picture Perfect 4.0
Picture Perfect 4.0
7.
8.
9.
Install the base package by typing:
/media/cdrom/INSTALL -b <Enter>
Respond to the on screen prompts. For more detailed information and
assistance with table sizings or optional settings, please refer to the
Picture Perfect v4 Installation Manual.
When prompted, reboot the system. Unmount the CD and remove it
from the CD-ROM drive.
5. Set up the Picture Perfect client computer(s)
1.
2.
3.
4.
Open Internet Explorer and type in a URL to connect to the server:
http://<hostname>/Picture
Install Java:
Click the J2SE Java Runtime Environment (JRE) link on the Picture
Perfect webtop. Accept the defaults and click Next as required.
Specify Java Runtime Parameters:
Right-click the Java (coffee mug) icon on the right-hand side of the
Windows taskbar. Select Open Control Panel. Click the Advanced
tab. In the Java Runtime Parameters text box, enter a new memory
specification:
• If your workstation memory is 512, enter: -Xms192m -Xmx384m
• If your workstation memory is 1024 or above, enter:
-Xms384m -Xmx512m
Click Apply.
Disable Client JVM Automatic Updates:
Click the Update tab. Make sure that Check for Updates
Automatically is not selected.
6. Start Picture Perfect and log on
To ensure connectivity, from a Picture Perfect 4.0 client workstation,
perform the following steps:
1. Open Internet Explorer and type in a URL to connect to the server:
http://<hostname>/Picture
2. Log on as install.
Quick Installation
460656001B • April 2011
Copyright © 2011, UTC Fire & Security
This document provides basic instructions for typical new stand-alone
Picture Perfect installations. Refer to the Picture Perfect v4 Installation
Manual for detailed instructions.
• For custom installations, optional packages, or upgrades, refer to the
Picture Perfect v4 Installation Manual.
• For redundant systems, refer to the Picture Perfect 4.0 Redundant
Edition Installation Manual.
• For enterprise systems, refer to the Picture Perfect 4.0 Enterprise
Edition Installation Manual.
Note: PDF versions of these documents can be found on the Documentation CD.
Overview
Each step below is discussed in more detail in the sections that follow:
1. Meet software requirements on page 1
2. Meet hardware requirements on page 2
3. Install and configure the server operating system on page 2
4. Install Picture Perfect on page 2
5. Set up the Picture Perfect client computer(s) on page 4
6. Start Picture Perfect and log on on page 4
1. Meet software requirements
The following are recommended and supported configurations:
Server
Version
Kernel Level
Red Hat Enterprise Linux
(WS, ES, or AS)
4.0 Update 4 Required for Dell
840/2900/2950 servers
2.6.9-42
4.0
2.6.9-5.EL
IBM AIX
5L Version 5.3 Recommended
up to ML05
5L Version 5.2
up to ML08
Service Pack
Contacting Customer Support
Client
Version
You can reach customer support by phone 8 A.M. to 7 P.M. EST, Monday
through Friday.
United States: 1-888-437-3287
Asia: 65 639 19314
Australia: 61 3 9239 1200
EMEA: 48 58 326 22 40
Latin America: 503 885 5700
Windows Operating
System
2000 Professional
4 or later
XP Professional
2 or later
Browser
Internet Explorer 6.0
Firefox, Netscape Navigator, and Mozilla are not certified.
Note: Picture Perfect 4.0 Service Pack 1.5 supports Red Hat Linux 4.0 Update 4,
which is required for this application when used on Dell PowerEdge 840,
2900, and 2950 servers.
460656001B.fm Page 2 Saturday, April 16, 2011 8:52 PM
2 Picture Perfect 4.0
Quick Installation 3
2. Meet hardware requirements
4.
The following are the minimum, supported, configurations. Increased
memory and CPU will improve system performance.
Server
Minimum Client
Minimum
Intel based processor
or
pSeries 610 Server or
better
2.0 GHz
Intel based processor
2.0 GHz
RAM
1 GB
RAM
512 MB
Hard Drive
18 GB
Available Disk Space
100 MB
Network card
Network card
CD-ROM Drive
Java plug-in
1.4.2_13
Keyboard
Video card
Graphical Monitor
Mouse
3. Install and configure the server operating system
Make sure your server OS is installed and configured in accordance with
the instructions in the Picture Perfect v4 Installation Manual.
4. Install Picture Perfect
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read and accept the Picture Perfect license agreement and record the
number to obtain a license key from UTC Fire & Security Support.
Press Enter to proceed with the installation of additional AIX filesets.
When prompted, remove the Picture Perfect Installation CD and insert
the appropriate AIX CDs.
When prompted, insert the Picture Perfect Utilities CD, which contains
various packages, such as HTTP Server, Mozilla, and Java 1.4,
required to run Picture Perfect.
When prompted, remove the Picture Perfect Utilities CD, and insert
the appropriate AIX CD. When the installation is complete and any
updates applied, the system reboots.
Remove the AIX CD and insert the Picture Perfect Installation CD. If
necessary, mount the CD.
Change to the root directory:
cd /<Enter>
Install the base package by typing:
/mnt/INSTALL -b <Enter>
Respond to the on screen prompts. For more detailed information and
assistance with table sizings or optional settings, please refer to the
Picture Perfect v4 Installation Manual.
When prompted, reboot the system. Unmount the CD and remove it
from the CD-ROM drive.
IBM AIX
Red Hat Linux
The following CD sets are required:
• AIX 5L Operating System
• AIX 5L Expansion Pack
• AIX 5L Bonus Pack (Optional)
• AIX 5L Documentation
• AIX 5L Update
• Picture Perfect Version 4.0 Installation CD
• Picture Perfect v4 IBM AIX 5L Utilities CD
The following CD sets are required:
• Red Hat Linux 4.0 Operating System
• Picture Perfect Version 4.0 Installation CD
1. Log on to the system as the root user and open a new terminal
window.
2. Insert the Picture Perfect Installation CD into the CD-ROM drive and
when the CD-ROM light stops blinking, mount the CD.
mount /media/cdrom <Enter>
3. Install the Picture Perfect Linux filesets by typing:
/media/cdrom/INSTALL -u <Enter>
4. Read and accept the Picture Perfect license agreement and record the
number to obtain your license key from UTC Fire & Security Support.
5. When the installation is complete and any updates applied, the system
exits to the command prompt. Type reboot to reboot the system.
Note: These instructions assume a graphical terminal.
1.
2.
3.
Log on to the system as the root user and open a new terminal
window.
Insert the Picture Perfect Installation CD into the CD-ROM drive and
when the CD-ROM light stops blinking, mount the CD.
mount -v cdfrs -o ro /dev/cd0 /mnt <Enter>
Install the Picture Perfect AIX filesets by typing:
/mnt/INSTALL -u <Enter>
Note:
6.
The Picture Perfect Installation CD should still be in the CD-ROM.
Change to the root directory:
cd /<Enter>
