RNC Parameter Reference

Published on January 2017 | Categories: Documents | Downloads: 65 | Comments: 0 | Views: 1105
of 3267
Download PDF   Embed   Report

Comments

Content

162734118.xls.ms_office1

文档密级

RNC V200R009

BSC6810 V200R011C00SPC180 Parameter Reference

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please c

Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: Email:

http://www.huawei.com [email protected]

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Te

Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen

8/7/2013

华为机密,未经许可不得扩散

第1页,共3267页

162734118.xls.ms_office1

文档密级

80

nical support and service. For any assistance, please contact our local office or company headquarters.

any means without prior written consent of Huawei Technologies Co., Ltd.

operty of their respective holders.

fort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this d

8/7/2013

华为机密,未经许可不得扩散

第2页,共3267页

162734118.xls.ms_office1

文档密级

s, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

8/7/2013

华为机密,未经许可不得扩散

第3页,共3267页

162734118.xls.ms_office1

文档密级

Purpose
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.

Version
The product version related to this document is: BSC6810 V200R011C00SPC180.

Intended Audience
•Network planners •Field engineers •System engineers •Shift operators

Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name MML Command NE Meaning Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution Access

8/7/2013

华为机密,未经许可不得扩散

第4页,共3267页

162734118.xls.ms_office1

文档密级

Attribute Introduced in Version

Change History

This section provides information on the changes between BSC6810V200R011C00SPC100 and BSC68 Parameter Change

CIOOffset

CqiDtxTimer CQIFbCkinInDTXDRXmode DpcchBurst1 DpcchBurst2 DrxCycle DrxGrantMonitoring Drxvalid DtxCycle1 DtxCycle2 DtxLongPreamble InactThsForCycle2 InactThsForDrxCycle InactThsForGrantMonitoring MacDtxCycle MacInactiveThreshold

8/7/2013

华为机密,未经许可不得扩散

第5页,共3267页

162734118.xls.ms_office1

文档密级

CtrlPlnSharingOutThd

Change History

This section provides information on the changes between BSC6810V200R011C00SPC140 and BSC68 Parameter Change

QrxlevminExtSup

8/7/2013

华为机密,未经许可不得扩散

第6页,共3267页

162734118.xls.ms_office1

文档密级

rameters, including the meaning, values, and usage of RNC parameters.

ated to this document is: BSC6810 V200R011C00SPC180.

cribed in the following aspects. Remarks Simple string for identifying a parameter Full name of the parameter Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command NEs on which the parameter is set Functions, functioning ways, and protocols of the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification Whether this parameter is read/write or read only

8/7/2013

华为机密,未经许可不得扩散

第7页,共3267页

162734118.xls.ms_office1 Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter Version in which this parameter is introduced

文档密级

nformation on the changes between BSC6810V200R011C00SPC100 and BSC6810 V200R011C00SPC140. MML Command

ADD INTERFREQNCELL(Optional) ADD INTRAFREQNCELL(Optional)

SET DTXDRXPARA(Optional)

8/7/2013

华为机密,未经许可不得扩散

第8页,共3267页

162734118.xls.ms_office1

文档密级

SET CTRLPLNSHAREPARA(Optional)

nformation on the changes between BSC6810V200R011C00SPC140 and BSC6810 V200R011C00SPC180. MML Command

ADD CELLSELRESEL(Optional) ADD NRNCCELL(Optional)

8/7/2013

华为机密,未经许可不得扩散

第9页,共3267页

162734118.xls.ms_office1

文档密级

8/7/2013

华为机密,未经许可不得扩散

第10页,共3267页

162734118.xls.ms_office1

文档密级

C6810 V200R011C00SPC140. Change Description The actual value range is changed. Before change: Actual Value Range: -20~20 After change: Actual Value Range: -10~10, step: 0.5 The parameter ID that is cited in the parameter relation is changed. Before change: This parameter is valid when [PARA]DtxInvalid[ /PARA] is set to ON. After change: This parameter is valid when [PARA]Dtxvalid[/P ARA] is set to

8/7/2013

华为机密,未经许可不得扩散

第11页,共3267页

162734118.xls.ms_office1 The bearer of load sharing described in the meaning is changed. Before change: ...new arrival call attempts will be shared out to other CPU. After change: ...new arrival call attempts will be shared out to other SPU and none will be shared in this SPU.

文档密级

C6810 V200R011C00SPC180. Change Description The series number of 3GPP protocol is changed. Before change: 3GPP TS 25.304 After change: 3GPP 25.331 10.3.2.3

8/7/2013

华为机密,未经许可不得扩散

第12页,共3267页

162734118.xls.ms_office1

文档密级:

Parameter ID Parameter Name MML Command

Description

Value Type GUI Value Range Actual Value Range

AAL2 Path AAL2PATH Type T

The type of ADD R99, service carried by AAL2PATH(M Enumeratio HSPA, the AAL2 path andatory) n Type SHARE that users expect.

R99,HSPA, SHARE

AbsTime

This parameter specifies the time to execute re-host SET policy for the POOLPRIMHO Compound hour, min, Specify Time primary hosted STPOLICY(Ma Type sec NodeB, after the ndatory) RNC recovers from disaster and starts to operate. It defines the mapping of AC 0~9 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 10 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 11 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 12 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.

00:00:00~2 3:59:59

Ac09ToAsc

ADD AC 0~9 to PRACHACTO ASC mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

Ac10ToAsc

ADD AC 10 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

Ac11ToAsc

ADD AC 11 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

Ac12ToAsc

ADD AC 12 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

8/7/2013

华为机密,未经许可不得扩散

第13页,共3267页

162734118.xls.ms_office1
It defines the mapping of AC 13 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 14 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 15 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.

文档密级:

Ac13ToAsc

ADD AC 13 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

Ac14ToAsc

ADD AC 14 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

Ac15ToAsc

ADD AC 15 to ASC PRACHACTO mapping ASCMAP(Opti onal)

Interval Type

0~7

0~7

ADD Access service Identifying an AccessServic PRACHASC(M class ASC. eClass andatory)

ASC0, ASC1, ASC2, ASC3, Enumeratio ASC4, n Type ASC5, ASC6, ASC7

ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7 Disable (not support the address and control field compress function), Enable (support the address and control field compress function)

ACFC

Address and control field compress

ADD PPPLNK(Optio nal) ADD MPLNK(Option al)

This parameter specifies whether to enable the Disable, address and Enumeratio Enable control fields n Type compression switch.

8/7/2013

华为机密,未经许可不得扩散

第14页,共3267页

162734118.xls.ms_office1
Interval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells managed by this subsystem, it selects the first cell at random. After waiting for the time specified SET in this parameter, Interval ACALGO(Man the subsystem Type datory) selects the second cell and the first cell is still with access classes restriction. The process lasts until all the cells are going through access classes restriction. For detailed information of this parameter, refer to 3GPP TS 22.011.

文档密级:

AC Restriction AcIntervalOf Interval Of Cell Cell

1~36000

10~360000, step:10

Specifies the interval between consecutive Access Class SET pollings imposed Restriction DSACAUTOA on the PS domain Interval AcIntervalOf interval LGO(Mandator and CS domain in Type Cells between Cells y) different cells according to the flexible polling restriction mode.

1~36000

1~36000

8/7/2013

华为机密,未经许可不得扩散

第15页,共3267页

162734118.xls.ms_office1

文档密级:

AcRange

Range of restrained Access Class

SET DSACAUTOA LGO(Mandator y) ADD CELLDSACM ANUALPARA( Mandatory)

Specifies the restricted access class according to Bit Field the flexible Type polling restriction mode.

AC0(Acces s Class 0 Restriction), AC1(Acces s Class 1 Restriction), AC2(Acces s Class 2 Restriction), AC3(Acces s Class 3 Restriction), AC4(Acces s Class 4 Restriction), AC5(Acces s Class 5 Restriction), AC6(Acces s Class 6 Restriction), AC7(Acces s Class 7 Restriction), AC8(Acces s Class 8 Restriction), AC9(Acces s Class 9 Restriction), AC10(Acce

AC0,AC1,A C2,AC3,AC 4,AC5,AC6 ,AC7,AC8, AC9,AC10, AC11,AC1 2,AC13,AC 14,AC15

8/7/2013

华为机密,未经许可不得扩散

第16页,共3267页

162734118.xls.ms_office1

文档密级:

AC Restriction AcRestriction Indicator

Specifies the ADD access classes CELLDSACM that are restricted Bit Field ANUALPARA( according to the Type Mandatory) fixed restriction mode.

AC0(Acces s Class 0 Restriction), AC1(Acces s Class 1 Restriction), AC2(Acces s Class 2 Restriction), AC3(Acces s Class 3 Restriction), AC4(Acces s Class 4 Restriction), AC5(Acces s Class 5 Restriction), AC6(Acces s Class 6 Restriction), AC7(Acces s Class 7 Restriction), AC8(Acces s Class 8 Restriction), AC9(Acces s Class 9 Restriction), AC10(Acce

AC0,AC1,A C2,AC3,AC 4,AC5,AC6 ,AC7,AC8, AC9,AC10, AC11,AC1 2,AC13,AC 14,AC15

8/7/2013

华为机密,未经许可不得扩散

第17页,共3267页

162734118.xls.ms_office1

文档密级:

SET DSACAUTOA LGO(Mandator Interval length y) of Domain SET AcRstrctInter Specific ACALGO(Man valLen Access Class datory) Restriction ADD CELLDSACM ANUALPARA( Mandatory)

Specifies the interval delay between consecutive Interval pollings Type according to the flexible polling restriction mode.

6~3600

6~3600

8/7/2013

华为机密,未经许可不得扩散

第18页,共3267页

162734118.xls.ms_office1
Access restriction ratio. When a cell performs access classes restriction, you can select some access classes from AC0 to AC9 based on the ratio specified in this parameter and perform access classes restriction on the selected SET access classes. ACALGO(Man After access datory) classes restriction goes on for AcRstrctIntervalL en, the original access classes restriction is released and other access classes of the local cell are selected for access classes restriction based on the ratio specified in this parameter. OFF indicates that the AC algorithm is SET automatically ACALGO(Opti disabled. ON onal) indicates that the AC algorithm is automatically enabled.

文档密级:

AC AcRstrctPerc Restriction ent Percent

Interval Type

1~10

0.1~1, step:0.1

AC AcRstrctSwit Restriction ch Switch

Enumeratio OFF, ON n Type

OFF, ON

ACTTYPE

Type

GPS(Global Position This parameter System), ACT specifies the type DGPS(Diffe GPS(Mandatory of the GPS Enumeratio rential ) assistance data to n Type Global be activated. Position System), BOTH(both GPS and

GPS(Global Position System),DG PS(Differen tial Global Position System),BO TH(both GPS and DGPS)

8/7/2013

华为机密,未经许可不得扩散

第19页,共3267页

162734118.xls.ms_office1
This parameter STR specifies the CPU CPUUSAGETS usage to be T(Mandatory) increased. The activity factor at the radio layer varies with the service priority. The configuration of SET the activity factor ADMCTRL(Ma is performed ndatory) based on the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive.

文档密级:

ACU

Added CPU occupancy

Interval Type

1~95

1 to 95

AFSetObj

AFSetObj

NOPRIORI TY(NOPRI ORITY), GOLD(GO Enumeratio LD), n Type SILVER(SI LVER), COPPER(C OPPER)

NOPRIORI TY, GOLD, SILVER, COPPER

A-GPS ADD Flag of A-GPS AgpsActivate Method Active SMLCCELL(O location Flag Flag ptional) activation.

Enumeratio INACTIVE, INACTIVE, n Type ACTIVE ACTIVE

This parameter indicates whether the GPS A-GPS SET AGPSAddAs NODELIV NODELIV Additional Additional SMLC(Optional Enumeratio sDataSendFla ERY, ERY, Assistance Data Data Send Flag ) n Type g DELIVERY DELIVERY Request is sent when the A-GPS method is used. UE positioning UE_BASE UE_BASE mode when the AD, D, GPS method is UE_ASSIS UE_ASSIS SET selected. The UE TED, TED, SMLC(Optional supports both UE- Enumeratio UE_BASE UE_BASE ) based A-GPS n Type D_PREFER D_PREFER mode and UERED, RED, assisted A-GPS UE_ASSIS UE_ASSIS mode. TED_PREF TED_PREF ERRED ERRED ADD GPS(Mandatory ) ACT GPS(Mandatory )

A-GPS AGPSMethod Method Type Type

AGPSRECEI GPS ID VERID

This parameter specifies a GPS reference receiver.

Interval Type

0~65534

0 to 65534

8/7/2013

华为机密,未经许可不得扩散

第20页,共3267页

162734118.xls.ms_office1

文档密级:

AGPSRECEI GPS type VERTYPE

This parameter specifies the type RNC(Local of the GPS RNC), reference NODEB(Lo receiver. A GPS cal NodeB), ADD reference receiver NRNC_RN GPS(Mandatory Enumeratio can be configured C(Nearby ) n Type on the local RNC, RNC), a NodeB of the NRNC_NO local RNC, or a DEB(Node neighboring B in RNC) RNC.

RNC(Local RNC), NODEB(Lo cal NodeB), NRNC_RN C(Nearby RNC), NRNC_NO DEB(Node B in RNC)

8/7/2013

华为机密,未经许可不得扩散

第21页,共3267页

162734118.xls.ms_office1
Difference between the transmit power of AICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the acquisition indication properly. This problem affects the coverage of ADD the downlink CHPWROFFSE common channel T(Optional) and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to the 3GPP TS 25.433 protocol. Transmission timing information of an AICH. "0" indicates that there are 7680 chips offset between the access preamble ADD of the PRACH AICH(Optional) and AICH. "1" indicates that there are 12800 chips offset between them. For detailed information of this parameter, refer to 3GPP TS 25.211.

文档密级:

AICH power AICHPowerO offset ffset

Interval Type

-22~5

-22~5

AICH AICHTxTimi transmission ng timing

Interval Type

0~1

0~1

8/7/2013

华为机密,未经许可不得扩散

第22页,共3267页

162734118.xls.ms_office1
SET ALMLVL(Man datory) SET BOXRPT(Mand atory) SET ALMPORT(Opt ional)

文档密级:

aid

Alarm ID

This parameter specifies the alarm ID of the alarm configuration record to be modified.

Interval Type

1~65535

1~65535

AlignMode

align type

This parameter specifies whether SET the configured HSHSSCCHLESS SCCH Less Enumeratio OPPARA(Mand Operation n Type atory) parameters adopt the octet_align or bit_align mode.

BIT_ALIG N(Bit aligned mode), OCTET_A LIGN(Octet aligned

BIT_ALIG N, OCTET_A LIGN

AllBw

Bandwidth

The unit is kbps. This parameter is valid only when ADD Transport Interval RSCGRP(Mand Resource Group Type atory) Type is IP and Bandwidth mode is HALF_DUPLEX.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第23页,共3267页

162734118.xls.ms_office1
If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured HSPDSCH code number. If Automatic is chosen, allocating HS-PDSCH code number between configured HSPDSCH Maximum code ADD Manual(Ma Allocate Code number and HSManual, AllocCodeMo CELLHSDPA( Enumeratio nual), Mode PDSCH Automatic de Optional) n Type Automatic( Minimum code Automatic) number. At the early stage of network construction, or when the traffic model of subscribers in a cell is not fixed, the parameter can be set to Automatic to have the HSDPA channel codes be automatically

文档密级:

ALTITUDE

GPS antenna altitude

This parameter specifies the ADD antenna altitude GPS(Mandatory of the GPS ) reference receiver.

Interval Type

-1000 to 1000~1000 10000 0

GPS antenna ALTITUDEI altitude MP

This parameter specifies the ADD antenna altitude GPS(Mandatory of the GPS ) reference receiver. (IMP unit: Feet)

Interval Type

3281~3281 3281~3281 0 0

8/7/2013

华为机密,未经许可不得扩散

第24页,共3267页

162734118.xls.ms_office1

文档密级:

alvl

Alarm Severity

This parameter SET specifies the ALMLVL(Man alarm severity to datory) be set.

Critical(Crit ical), Major(Majo Critical,Maj Enumeratio r), or,Minor,W n Type Minor(Mino arning r), Warning(W arning)

ADD CELLINTERFR EQHOCOV(Op 2B event retry tional) AmntOfRpt2 max times SET B INTERFREQH OCOV(Optional )

Maximum number of times for event 2B retry. This parameter defines the number of times for event 2B retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for inter- Interval frequency Type handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored. After the maximum number of times for event 2B retry, the RNC sends the interfrequency measurement

0~63

0~62, 63: Infinity

8/7/2013

华为机密,未经许可不得扩散

第25页,共3267页

162734118.xls.ms_office1
Maximum retry times of the event 2C. This parameter defines the number of times for event 2C retry when the measurement control is valid. The larger the value of this ADD parameter, the CELLINTERFR larger the number EQHONCOV( of times for inter2C event retry Optional) frequency Interval AmntOfRpt2 max times SET handover retry, Type C INTERFREQH and the higher ONCOV(Option probability for the al) UE to be successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement

文档密级:

0~63

0~62, 63: Infinity

8/7/2013

华为机密,未经许可不得扩散

第26页,共3267页

162734118.xls.ms_office1
Maximum retry times of the event 3A. This parameter defines the number of times for event 3A retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interRAT handover Interval retry, and the Type higher probability the UE is successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message

文档密级:

ADD CELLINTERR ATHOCOV(Op 3A event retry AmntOfRpt3 tional) max times A SET INTERRATHO COV(Optional)

0~63

0~62, 63: Infinity

8/7/2013

华为机密,未经许可不得扩散

第27页,共3267页

162734118.xls.ms_office1
Maximum retry times of the event 3C. This parameter defines the number of times for event 3C retry when the measurement control is valid. The larger the value of this ADD parameter, the CELLINTERR larger the number ATHONCOV( of times for inter3C event retry Optional) RAT handover Interval AmntOfRpt3 max times SET retry, and the Type C INTERRATHO higher probability NCOV(Optional the UE is ) successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message This parameter specifies to edit sender ADD parameters, TYPRABRLC( receiver Mandatory) parameters, or flow control parameters.

文档密级:

0~63

0~62, 63: Infinity

RLC AM mode AmRlcCfgPar parameters a selection

SENDER_P ARA, RECEIVE_ Enumeratio PARA, n Type FLOWCON TROL_PA RA

SENDER_P ARA, RECEIVE_ PARA, FLOWCON TROL_PA RA

8/7/2013

华为机密,未经许可不得扩散

第28页,共3267页

162734118.xls.ms_office1

文档密级:

QOS Switch AMRQosPerf For AMR orm Traffic

When the parameter is set to YES, the QOS control algorithm is used for AMR services. When the parameter is set to NO, the SET QOS control QOSACT(Optio Enumeratio NO, YES algorithm is not nal) n Type used for AMR services.The QOS actions of AMR services include rate downsizing, inter frequency handover and inter rat handover. Threshold of AMR call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is SET higher than this KPIALMTHD( threshold and the Optional) number of AMR call release is higher than the related threshol, the KPI alarm of AMR call drop ratio is reported. The minimum number of AMR RAB establish request per SPU to report KPI alarm. In a checking period,if the number of SET AMR RAB KPIALMTHD( establish request Optional) is higher than the threshold and the AMR RAB setup successful ratio is lower than this threshold,the KPI alarm of AMR RAB setup ratio is reported.

NO, YES

Threshold of AmrRabAbno AMR Call rmRelRatioTh Drop Ratio d

Interval Type

0~100

0~100

Minimum Number of AmrRabEstab AMR RAB AttMinNum Establish Request

Interval Type

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第29页,共3267页

162734118.xls.ms_office1

文档密级:

Threshold of AMR RAB AmrRabEstab Setup SuccRatioThd Successful Ratio

Threshold of AMR RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower SET than this Interval KPIALMTHD( threshold and the Type Optional) number of AMR RAB establish request is higher than the related threshold,the KPI alarm of AMR RAB setup ratio is reported. The minimum number of AMR call release per SPU to report KPI alarm.In a checking period, if the number of SET AMR call release Interval KPIALMTHD( is higher than the Type Optional) related threshold and the AMR call drop ratio is higher than this threshold, the KPI alarm of AMR call drop ratio is reported.

0~100

0~100

Minimum Number of AmrRabRelM AMR Call inNum Release

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第30页,共3267页

162734118.xls.ms_office1
Timer for triggering a second adjustment of the UL AMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL AMR mode adjustment when SET the associated Interval QOSACT(Optio command is Type nal) delivered. The UL AMRC rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL

文档密级:

Wait Timer AmrUlRateA For AMR djTimerLen Uplink Rate

20~64000

20~64000

8/7/2013

华为机密,未经许可不得扩散

第31页,共3267页

162734118.xls.ms_office1

文档密级:

ANI

Adjacent Node ID

ADD ADJNODE(Ma ndatory) ADD AAL2PATH(M andatory) ADD AAL2RT(Mand atory) ADD ADJMAP(Man datory) ADD IPPATH(Manda tory) ADD IPPATHBIND( Mandatory) ACT IPPM(Mandator y) ACT VCLCC(Manda tory) LOP VCL(Mandator y)

ID of the adjacent node. An RNC can be Interval configured with at Type most 2000 adjacent nodes.

0~1999

0~1999

Cell Antenna AntennaAltitu Altitude deMeter

Altitude of the cell antenna in the WGS-84 coordinates. This is a necessary parameter, ADD controlled by Interval SMLCCELL(O MTRLGY and Type ptional) valid when MET~0(metric system).The value of this parameter has effect on the location result.

32767~327 32767~327 67 67

8/7/2013

华为机密,未经许可不得扩散

第32页,共3267页

162734118.xls.ms_office1
Altitude of the cell antenna in the WGS-84 coordinates. This is controlled by ADD MTRLGY and SMLCCELL(O valid when ptional) IMP~1(British measurement).Th e value of this parameter has effect on the location result. Latitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the ADD value SMLCCELL(O corresponding to ptional) the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the

文档密级:

Cell Antenna AntennaAltitu Altitude deMeterImp

Interval Type

107502~10 107502~10 7502 7502

Cell Antenna AntennaLatit Latitude udeDegree

Interval Type

-90~90, 90000000~ step: 90000000 0.000001

8/7/2013

华为机密,未经许可不得扩散

第33页,共3267页

162734118.xls.ms_office1
This parameter specifies the latitude of the cell antenna in the WGS-84 coordinates. The input format is ADD ddd:mm:ss.ssss. SMLCCELL(O This is controlled String Type ptional) by GCDF and valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. Longitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the ADD value Interval SMLCCELL(O corresponding to Type ptional) the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the

文档密级:

AntennaLatit Cell Antenna udeDegreeSe Latitude c

-

-90~90

Cell Antenna AntennaLongi Longitude tudeDegree

-180~180, 180000000 step: ~18000000 0.000001 0

8/7/2013

华为机密,未经许可不得扩散

第34页,共3267页

162734118.xls.ms_office1
Longitude of the cell antenna in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. ADD This is controlled SMLCCELL(O by GCDF and String Type ptional) valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. Coverage angle of a sector. For an omni-directional ADD cell, the value is Interval SMLCCELL(M 0~3600 360.The value of Type andatory) this parameter has effect on the location result. Azimuth of the main lobe of the cell antenna (the counter-clockwise ADD angle from the Interval SMLCCELL(M direction of the Type andatory) main lobe to the north).The value of this parameter has effect on the location result. Access point(AP) cell ADD indicator. When NRNCCELL(O the indicator is ptional) TRUE, it indicates that the cell is AP cell. Upper-layer application type of the SCTP link.At Iu-b Interface the ADD Upper-Layer SCTPLNK(Man application type is datory) NBAP,at Iu-r, IuPS and Iu-CS Interface the Upper-Layer application type is M3UA.

文档密级:

AntennaLongi Cell Antenna tudeDegreeSe Longitude c

-180~180

Cell Antenna AntennaOpen Opening ing

0~360, step: 0.1

Cell Antenna AntennaOrien Orientation tation

0~3600

0~360, step: 0.1

APFlag

APFlag

TRUE, Enumeratio FALSE n Type

FALSE,TR UE

APP

Application type

NBAP, Enumeratio M3UA n Type

NBAP, M3UA

8/7/2013

华为机密,未经许可不得扩散

第35页,共3267页

162734118.xls.ms_office1

文档密级:

RAB applied AppliedDirect direction

APPLIED_ This parameter ON_UPLIN specifies the ADD K, direction where TYPRABBASI Enumeratio APPLIED_ the current typical C(Mandatory) n Type ON_DOW RAB parameters NLINK, are applied. APPLIED_ ON_BOTH

APPLIED_ ON_UPLIN K, APPLIED_ ON_DOW NLINK, APPLIED_ ON_BOTH

AREAFLAG Area flag

SYN BRDAREA(Opt Area flag. ional)

PRIMARY( Active PRIMARY, Enumeratio Area), STANDBY, n Type STANDBY ALL (Standby area), ALL

AREAFLAG Area flag

This parameter PRIMARY( LOD specifies the flag Primary), PRIMARY, PATCH(Option Enumeratio of the active and STANDBY STANDBY, al) n Type standby areas. (Standby), ALL ALL

User_priority of SET ARP10Priorit Allocation/Ret USERPRIORIT y ention priority Y(Optional) 10

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 10.

Gold,Silver, Copper

User_priority of SET ARP11Priorit Allocation/Ret USERPRIORIT y ention priority Y(Optional) 11

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 11.

Gold,Silver, Copper

User_priority of SET ARP12Priorit Allocation/Ret USERPRIORIT y ention priority Y(Optional) 12

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 12.

Gold,Silver, Copper

8/7/2013

华为机密,未经许可不得扩散

第36页,共3267页

162734118.xls.ms_office1

文档密级:

User_priority of SET ARP13Priorit Allocation/Ret USERPRIORIT y ention priority Y(Optional) 13

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 13.

Gold,Silver, Copper

User_priority of SET ARP14Priorit Allocation/Ret USERPRIORIT y ention priority Y(Optional) 14

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 14.

Gold,Silver, Copper

User_priority of SET ARP1Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 1

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 1.

Gold,Silver, Copper

User_priority of SET ARP2Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 2

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 2.

Gold,Silver, Copper

User_priority of SET ARP3Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 3

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 3.

Gold,Silver, Copper

User_priority of SET ARP4Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 4

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 4.

Gold,Silver, Copper

User_priority of SET ARP5Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 5

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 5.

Gold,Silver, Copper

8/7/2013

华为机密,未经许可不得扩散

第37页,共3267页

162734118.xls.ms_office1

文档密级:

User_priority of SET ARP6Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 6

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 6.

Gold,Silver, Copper

User_priority of SET ARP7Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 7

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 7.

Gold,Silver, Copper

User_priority of SET ARP8Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 8

User_priority corresponding to Gold, Allocation/Retent Enumeratio Silver, ion priority 8. n Type Copper

Gold,Silver, Copper

User_priority of SET ARP9Priority Allocation/Ret USERPRIORIT ention priority Y(Optional) 9

User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 9.

Gold,Silver, Copper

ARPRETRY

ARP packet resend times

This parameter specifies the number of times the ARP resends after the specified time exceeds. Assume that "ARP packet resend times" is set to N. If the STR number of times Interval IPCHK(Optiona Type no response is l) received after the ARP is resent for N times, the L3 DETECT FAIL alarm is reported. In the case of a key detect, the switchover of ports may be triggered.

3~10

3 to 10

8/7/2013

华为机密,未经许可不得扩散

第38页,共3267页

162734118.xls.ms_office1

文档密级:

ARP packet ARPTIMEO time-out UT

This parameter STR specifies the time- Interval IPCHK(Optiona out value for the Type l) ARP packets.

3~10

300 to 1000

The ATM ATMLOGIC Logic Port PORT Number

This parameter STR specifies the Interval NODEBBWRP number of an Type T(Mandatory) ATM logical port.

0~255

0 to 255

ATMSN

This parameter NodeB ADD specifies the Interval ATM_TRANS NODEBIP(Man number of the slot Type Slot No. datory) bearing NodeB ATM transport.

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第39页,共3267页

162734118.xls.ms_office1

文档密级:

ATMSRN

This parameter specifies the NodeB ADD number of the ATM_TRANS NODEBIP(Man subrack bearing Subrack No. datory) NodeB ATM transport.

Interval Type

0~5

0 to 5

ATT

Indicating whether attach/detach is allowed. NOT_ALLOWE D indicates that MS cannot apply the IMSI attach/detach ADD Attach/detach procedure. NOT_ALL NOT_ALL CNDOMAIN(O Enumeratio indication ALLOWED OWED, OWED,AL ptional) n Type indicates that MS ALLOWED LOWED can apply the IMSI attach/detach procedure. It is valid only when [CN domain ID] is set as CS_DOMAIN.

8/7/2013

华为机密,未经许可不得扩散

第40页,共3267页

162734118.xls.ms_office1

文档密级:

ADD PPPLNK(Mand atory) Validate mode AUTHMODE ADD MPGRP(Manda tory)

This parameter specifies the authentication SERVER, Enumeratio mode during PPP CLIENT n Type or MLPPP link negotiation.

SERVER(se ver mode), CLIENT(cli ent mode)

Validate user AUTHNAME name

ADD PPPLNK(Mand atory) ADD MPGRP(Manda tory)

This parameter specifies the user name for PPP or MLPPP link negotiation.

String Type -

0 to 63 character

AUTHPWD

Validate password

ADD PPPLNK(Mand atory) ADD MPGRP(Manda tory)

This parameter specifies the password for PPP String Type or MLPPP link negotiation.

0 to 15 character

AUTHTYPE

Validate protocol type

ADD PPPLNK(Optio nal) ADD MPGRP(Option al)

This parameter specifies the authentication protocol type during PPP or MLPPP link negotiation.

NO_V, Enumeratio PAP_V, n Type CHAP_V

NO_V(not verify), PAP_V(PA P verify), CHAP_V(C HAP verify)

8/7/2013

华为机密,未经许可不得扩散

第41页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the auto negotiation is enabled. 1. The auto negotiation must be enabled when "Board type " is set to FG2a, and "Port type" is set to GE. 2. If the auto negotiation is enabled, the SET transmission rate ENABLE, ENABLE, ETHPORT(Opti Enumeratio over the FE port, DISABLE DISABLE onal) n Type work mode, and flow control mode depend on the negotiation results. If the auto negotiation not disabled, you can set the transmission rate over the FE port, work mode, and flow control mode. In this case, ensure that the settings are

文档密级:

AUTO

Auto negotiation

Available Availablesign signature end atureEndInde index x

Identifying the available signature end ADD index of an ASC. Interval PRACHASC(O For detailed Type ptional) information of this parameter, refer to 3GPP TS 25.304.

0~15

0~15

8/7/2013

华为机密,未经许可不得扩散

第42页,共3267页

162734118.xls.ms_office1

文档密级:

Identifying the available signature start Available ADD index of an ASC. Availablesign Interval signature start PRACHASC(O For detailed atureStartInde Type index ptional) information of x this parameter, refer to 3GPP TS 25.304.

0~15

0~15

Available AvailableSub subchannel channelCtrlW control word ord

Identifying the available sub channels of an ASC. When a UE has been accessed to a sub channel, if [AICH transmission timing] is set to 1 (using the command ADD AICH), the 4 bits of this parameter will be repeated 3 times to form a ADD Bitstring (12). Interval PRACHASC(O Then, it is put Type ptional) into an "and " calculation together with the Bitstring (12) corresponding to the available sub channel allocated to the PRACH, and a 12-bit data stream is obtained finally. If a bit is 1, the corresponding sub channel is available for this

0~15

0~15

AvailCap

Capability of CN Node

ADD The Capability of Interval CNNODE(Man CN node. Type datory)

0~65535

0~6553500 0 step:1000

8/7/2013

华为机密,未经许可不得扩散

第43页,共3267页

162734118.xls.ms_office1

文档密级:

AVOL

Alarm VOL.

SET This parameter ALMPORT(Opt specifies the ional) alarm level.

LOW(Low), Enumeratio HIGH(High LOW,HIGH n Type )

This parameter Output Switch specified the SET BACK8KCL of backplane output switch of 8 Enumeratio OFF, ON CLK(Optional) KSW1 8K OutClock 1 kHz output clock n Type 1.

OFF, ON

This parameter Output Switch specified the SET BACK8KCL of backplane output switch of 8 Enumeratio OFF, ON CLK(Optional) KSW2 8K OutClock 2 kHz output clock n Type 2.

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第44页,共3267页

162734118.xls.ms_office1

文档密级:

Background BackgroundN noise oise

If [AutoAdaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [Auto-Adaptive Background Noise Update ADD Switch] is set to Interval CELLCAC(Opti ON, new Type onal) background noise is restricted by this parameter and [PARA]BgnAbno rmalThd[/PARA]. For detailed information of this parameter, refer to the 3GPP TS 25.133.

0~621

-112~50,step:0.1

Path of BACKUPPA Backup File TH

BKP DB(Optional)

This parameter specifies the full path for saving the backup file. If the specified path is not a full path, then it will be String Type treated as the relative path under "installation path in the BAM active workspace\BACK UP\".

0 to 128 characters

BAKIP

Backup port IP address

This parameter STR specifies the IP IPCHK(Optiona address of the l) standby port.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第45页,共3267页

162734118.xls.ms_office1

文档密级:

Backup port BAKMASK mask

This parameter STR specifies the IPCHK(Optiona mask of the l) standby port.

IP Address Type

0.0.0.0~255 .255.255.25 5

This parameter BAM External ADD specifies the IP Address BAMIP Network EMSIP(Optiona virtual IP address Type Virtual IP l) for the BAM external network. This parameter ADD specifies the BAM External IP Address BAMMASK EMSIP(Optiona subnet mask of Network Mask Type l) the BAM external network. ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato Band indicator ry) ADD GSMCELL(Opt ional) ADD NRNCCELL(M andatory) Band1, Indicating the Band2, selected Band3, frequency Band Band4, in the cell setup Band5, process. For Enumeratio Band6, detailed n Type Band7, information of Band8, this parameter, Band9, refer to 3GPP TS BandIndNot 25.433. Used

0.0.0.0~255 .255.255.25 5

0.0.0.0~255 .255.255.25 5

BandInd

Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNot Used

8/7/2013

华为机密,未经许可不得扩散

第46页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum available bandwidth for each traffic class in the Cell_FACH state with the downlink HSDSCH in use. If the actual data flow exceeds the SET Bandwidth of Interval maximum BandWidthFo FACHBANDW Fach Type bandwidth, the rFACH IDTH(Optional) traffic is buffered so that the buffer occupancy is increased. As a result, the state transition from Cell-FACH to DCH occurs. This parameter should be set according to the traffic class. Uniquely ADD identifying a Interval BS color code GSMCELL(Ma neighboring base Type ndatory) station with the same carrier.

文档密级:

1~1000

1~1000

BCC

0~7

0~7

8/7/2013

华为机密,未经许可不得扩散

第47页,共3267页

162734118.xls.ms_office1
Identifying BCCH frequency number of the inter-RAT cell. BCCH: Broadcast Control Channel GSM1900 Frequency number: (511811) GSM1800 Inter-RAT cell ADD Frequency BcchArfcn frequency GSMCELL(Ma number: (511number ndatory) 866) GSM900 Frequency number: (0-125) or (954-1024) GSM850 Frequency number: (127252) GSM450 Frequency number: (258This parameter specifies the transmission power of the HSPDSCH that sends the data carried on the ADD BCCH HSBCCH. When UE BcchHspdsch CELLEFACH( PDSCH power receive data from Power Optional) the HS-PDSCH in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HSPDSCH.

文档密级:

Interval Type

0~1023

0~1023

Interval Type

-350~150

35~15,step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第48页,共3267页

162734118.xls.ms_office1
When UE is in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HSPDSCH. ADD Meanwhile, the BCCH HSBcchHsscchP CELLEFACH( HS-SCCH shall SCCH power ower Optional) send signaling related to HSPDSCH. This parameter specifies the transmission power of the HSSCCH at the time. Offset of the BCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the system messages properly. This problem affects the coverage of the downlink BCH transmit ADD common channel BCHPower power BCH(Optional) and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS

文档密级:

Interval Type

-350~150

35~15,step: 0.1

Interval Type

-350~150

-35~15, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第49页,共3267页

162734118.xls.ms_office1
This parameter specifies the bearer type of the service. - R99: The SET service is carried BearType Bear Type USERGBR(Ma on a non-HSPA ndatory) channel. - HSPA: The service is carried on an HSPA channel. Indicating the ADD bear type of the BEARTYPE DSP bear type N7DPC(Mandat DSP is MTP3 or ory) M3UA.

文档密级:

Enumeratio R99, HSPA R99, HSPA n Type

MTP3, Enumeratio M3UA n Type

MTP3, M3UA

Threshold of continuous failed heartbeat detecting between the two RNCs in a RNC pool.If the heartbeat is not HeatBeat Lost ADD detected from the Interval BeatDectThre Times RNCPOOL(Opt peer RNC for a Type d Threshold ional) successive number of times specified by this parameter, the local RNC considers that the peer RNC is faulty. If the heartbeats are detected from the peer RNC for a successive HeatBeat ADD number of times Interval BeatRecvrThr Recover Times RNCPOOL(Opt specified by this Type ed Threshold ional) parameter, the local RNC considers that the peer RNC is normally Interval for the local RNC HeatBeat ADD sending the BeatSending Sending Time RNCPOOL(Opt heartbeat to the Dis Interval ional) peer RNC in the same RNC pool.

1~10

5

1~10

2

Interval Type

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第50页,共3267页

162734118.xls.ms_office1
The bit rate threshold used to determine whether to perform soft handover for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all the BE services of a user are lower than or equal to this threshold, the SET system will HOCOMM(Opt Enumeratio perform soft ional) n Type handover for this user to guarantee the service quality. When the velocity of the downlink DCH exceeds the restriction of this parameter, RNC will perform intrafrequence hard handover. To avoid the great effect of the system capacity

文档密级:

BE service BeBitRateTh handover rate d threshold

D8, D16, D32, D64, D128, D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第51页,共3267页

162734118.xls.ms_office1
Timer for state transition from CPC_HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Timer for state transition from CPC_HS-DSCH to FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model.

文档密级:

BE CPC to BeCpc2EFac E_FACH hStateTransTi Transition mer Timer

SET UESTATETRA NSTIMER(Opti onal)

Interval Type

1~65535

1~65535

BE CPC to FACH BeCpc2FStat Transition eTransTimer Timer

SET UESTATETRA NSTIMER(Opti onal)

Interval Type

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第52页,共3267页

162734118.xls.ms_office1

文档密级:

BE DCH to BeD2EFachSt E_FACH ateTransTime Transition r Timer

Timer for state transition from DCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with DCH) state is in stable low activity SET state. The too UESTATETRA small parameter Interval NSTIMER(Opti cannot probably Type onal) confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with non-realtime services is in the stable low activity state. If the value of this SET parameter is too UESTATETRA low, whether the Interval NSTIMER(Opti UE is in the Type onal) stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.

1~65535

1~65535

BE DCH to FACH BeD2FStateT Transition ransTimer Timer

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第53页,共3267页

162734118.xls.ms_office1

文档密级:

BeDlAct1

The first action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad First Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第54页,共3267页

162734118.xls.ms_office1

文档密级:

BeDlAct2

The second action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad Second Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第55页,共3267页

162734118.xls.ms_office1

文档密级:

BeDlAct3

The third action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad Third Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第56页,共3267页

162734118.xls.ms_office1

文档密级:

Timer for state transition from EDCH to FACH of BE services, used to check whether the UE with BE services carried over the E-DCH is in the stable low activity state. If the value of this parameter is too BE E-DCH To SET low, whether the FACH State UESTATETRA Interval BeE2FStateTr UE is in the Transition NSTIMER(Opti Type ansTimer stable low activity Timer onal) state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.

1~65535

1~65535

D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, BE SET transition of BE D8k, D12k, BeEFach2Cp E_FACH2CPC UESTATETRA services from Enumeratio D16k, cTvmThd 4A Threshold NS(Optional) E_FACH to CPC. n Type D24k, If the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第57页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, E_FACH to CPC. D20, D40, This parameter D60, D80, prevents D100, unnecessary D120, BE SET reports that are D160, BeEFach2Cp E_FACH2CPC UESTATETRA caused by traffic Enumeratio D200, cTvmTimeTo 4A Time NS(Optional) volume instability n Type D240, Trig from being D320, triggered. If the D640, value of this D1280, parameter is too D2560, high, the period D5000 of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, BE SET transition of BE D8k, D12k, BeEFach2DT E_FACH2D UESTATETRA services from Enumeratio D16k, vmThd 4A Threshold NS(Optional) E_FACH to n Type D24k, DCH. If the value D32k, of this parameter D48k, is too high, D64k, congestion may D96k, occur over the D128k, common channel. D192k,

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第58页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to DCH. This parameter prevents BE SET unnecessary BeEFach2DT E_FACH2D UESTATETRA reports that are vmTimeToTri 4A Time NS(Optional) caused by traffic g volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common This parameter specifies the threshold of the traffic volume of 4A event for triggering the BE transition of BE SET E_FACH2HSservices from BeEFach2HT UESTATETRA DSCH 4A E_FACH to HSvmThd NS(Optional) Threshold DSCH. If the value of this parameter is too high, congestion may occur over the common channel.

文档密级:

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第59页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to HSDSCH. This parameter prevents BE unnecessary SET BeEFach2HT E_FACH2HSreports that are UESTATETRA vmTimeToTri DSCH 4A caused by traffic NS(Optional) g Time volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE F2CPC_E- SET services from BeF2CpcETv DCH 4A UESTATETRA FACH to E-DCH mThd Threshold NS(Optional) with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel.

文档密级:

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第60页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. This parameter prevents BE SET unnecessary BeF2CpcETv FACH2CPC_E- UESTATETRA reports that are mTimeToTrig DCH 4A Time NS(Optional) caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE SET services from F2CPC_HSBeF2CpcHTv UESTATETRA FACH to HSDSCH 4A mThd NS(Optional) DSCH with CPC Threshold technology. If the value of this parameter is too high, congestion may occur over the common channel.

文档密级:

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第61页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HSD0, D10, DSCH with CPC D20, D40, technology. This D60, D80, parameter D100, prevents D120, BE SET unnecessary D160, F2CPC_HSBeF2CpcHTv UESTATETRA reports that are Enumeratio D200, DSCH 4A mTimeToTrig NS(Optional) caused by traffic n Type D240, Time volume instability D320, from being D640, triggered. If the D1280, value of this D2560, parameter is too D5000 high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, SET transition of BE BE F/R2D 4A D8k, D12k, BeF2DTvmT UESTATETRA services from Enumeratio Threshold D16k, hd NS(Optional) FACH to DCH. If n Type D24k, the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第62页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, FACH to DCH. D20, D40, This parameter D60, D80, prevents D100, unnecessary D120, SET reports that are D160, BE F/R2D 4A BeF2DTvmTi UESTATETRA caused by traffic Enumeratio D200, Time meToTrig NS(Optional) volume instability n Type D240, from being D320, triggered. If the D640, value of this D1280, parameter is too D2560, high, the period D5000 of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, SET transition of BE BE F2E-DCH D8k, D12k, BeF2ETvmTh UESTATETRA services from Enumeratio 4A Threshold D16k, d NS(Optional) FACH to E-DCH. n Type D24k, If the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第63页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH. This parameter prevents unnecessary SET reports that are BE F2E-DCH BeF2ETvmTi UESTATETRA caused by traffic 4A Time meToTrig NS(Optional) volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE F2HSSET services from BeF2HTvmT DSCH 4A UESTATETRA FACH to HShd Threshold NS(Optional) DSCH. If the value of this parameter is too high, congestion may occur over the common channel.

文档密级:

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

8/7/2013

华为机密,未经许可不得扩散

第64页,共3267页

162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, FACH to HSD20, D40, DSCH. This D60, D80, parameter D100, prevents D120, unnecessary SET D160, reports that are UESTATETRA Enumeratio D200, caused by traffic NS(Optional) n Type D240, volume instability D320, from being D640, triggered. If the D1280, value of this D2560, parameter is too D5000 high, the period of reporting 4A event is delayed and congestion may occur over the common channel.

文档密级:

BE F2HSBeF2HTvmTi DSCH 4A meToTrig Time

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第65页,共3267页

162734118.xls.ms_office1
Timer for state transition from FACH to PCH of BE services, used to check whether the UE in the CELL_FACH state is in the stable low activity state. When this parameter is set to 65535, it is regarded that the state transition SET from FACH to UESTATETRA PCH is not Interval NSTIMER(Opti performed. If the Type onal) value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the common channel resources are wasted. This parameter should be set on the basis of the BE service

文档密级:

BE FACH to PCH BeF2PStateTr Transition ansTimer Timer

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第66页,共3267页

162734118.xls.ms_office1
Timer for state transition from HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with HS-DSCH) state is in stable low activity state. The SET too small UESTATETRA Interval parameter cannot NSTIMER(Opti Type probably confirm onal) that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model.

文档密级:

BE HSPA to BeH2EFachSt E_FACH ateTransTime Transition r Timer

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第67页,共3267页

162734118.xls.ms_office1

文档密级:

Timer for state transition from HS-DSCH to FACH of BE services, used to check whether the UE in the CELL_DCH(with HS-DSCH) state with BE services is in the stable low activity state. If the value of this BE HS-DSCH SET parameter is too to FACH UESTATETRA Interval BeH2FStateT low, whether the Transition NSTIMER(Opti Type ransTimer UE is in the Timer onal) stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.

1~65535

1~65535

Pending time after the traffic D250, volume event 4B D500, BE HSSET is reported. This D1000, BeH2FTvmP DSCH2F 4B UESTATETRA parameter is used Enumeratio D2000, TAT Pending Time NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported.

250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第68页,共3267页

162734118.xls.ms_office1

文档密级:

BE HSBeH2FTvmT DSCH2F 4B hd Threshold

D8, D16, D32, D64, D128, D256, D512, This parameter is D1024, used to check D2k, D3k, whether the UE in D4k, D6k, the low activity D8k, D12k, state. If the UE is SET D16k, on HS-DSCH UESTATETRA Enumeratio D24k, channel, the low NS(Optional) n Type D32k, activity counter D48k, increases by 1 D64k, every time traffic D96k, volume event 4B D128k, is reported. D192k, D256k, D384k, D512k, D768k

8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

BE HSBeH2FTvmTi DSCH2F 4B meToTrig Time

When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is SET D160, reported. This UESTATETRA Enumeratio D200, parameter NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered.

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第69页,共3267页

162734118.xls.ms_office1
This parameter specifies the rate threshold of 2ms TTI on the EDCH for HSUPA BE service. When the cell capability and UE capability Rate threshold allows 2ms TTI, SET BeHsupa2ms of BE on 2ms 2ms TTI on the EFRC(Optional) TtiRateThs TTI of HSUPA DCH is used if the PS BE service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used. Timer for rejecting rate increase after rate decrease is performed across the Iur interface for BE services. If the best cell is on the DRNC, the SET Timer For BE timer starts when BEInterIurRat QOSACT(Optio Inter Iur Rate rate decrease eUpTimer nal) based on RLC retransmission is triggered. Before the timer expires, requests for rate increase triggered by DL traffic volume event 4A will be rejected.

文档密级:

D8, D16, D32, D64, D128, D144, D256, Enumeratio D384, n Type D608, D1440, D2048, D2880

8,16,32,64,1 28,144,256, 384,608,144 0,2048,2880

Interval Type

0~1024

0~1024

The ralative power margin of single BE traffic, used to calculate ADD the triggering CELLDCCC(O BE Event F threshold of event ptional) Interval Reporting F, can avoid the BePwrMargin SET Type Power Margin fluctuation of DCCC(Optional traffic rate in case ) the power becomes restricted after rate is increased.

0~100

0~10, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第70页,共3267页

162734118.xls.ms_office1

文档密级:

When the parameter is set to YES, the QOS control algorithm is used for BE services. When the parameter is set to NO, the SET QOS Switch QOS control BEQosPerfor QOSACT(Optio Enumeratio NO, YES For BE Traffic algorithm is not m nal) n Type used for BE services.The QOS actions of BE services include rate downsizing, inter frequency handover and inter rat handover. This parameter specifies the power occupancy ADD of the control part TYPRABBASI of reference TFC. C(Mandatory) For details of this parameter, refer to the 3GPP TS 25.214. This parameter specifies the power occupancy ADD of the data part of TYPRABBASI reference TFC. C(Mandatory) For details of this parameter, refer to the 3GPP TS 25.214.

NO, YES

BetaC

Reference BetaC

Interval Type

1~15

1~15

BetaD

Reference BetaD

Interval Type

1~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第71页,共3267页

162734118.xls.ms_office1

文档密级:

BeUlAct1

The first action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad First Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第72页,共3267页

162734118.xls.ms_office1

文档密级:

BeUlAct2

The second action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad Second Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第73页,共3267页

162734118.xls.ms_office1

文档密级:

BeUlAct3

The third action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad Third Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.

8/7/2013

华为机密,未经许可不得扩散

第74页,共3267页

162734118.xls.ms_office1

文档密级:

Indicator For BeUlEvTrigIn BE Uplink d QOS Event

For BE service, When the parameter is set to SINGLE, an UL event 6A1 or 5A can independently trigger the QOS enhancement action. The 6A1, 5A switch settings decide whether to perform 6A1 or SET 5A measurement SINGLE, SINGLE, QOSACT(Optio control. When the Enumeratio COMBINE COMBINE nal) parameter is set to n Type COMBINE, only combined events 6A1+5A can trigger the QOS enhancement action, and whether to perform 6A1 and 5A measurement is not controlled by the 6A1 and 5A measurement switch.

BeUlQos5A McSwitch

Event 5A measurement switch when BeUlEvTrigInd is SET Measurement set to SINGLE for QOSACT(Optio Enumeratio NO, YES Of 5A Switch BE service. If this nal) n Type parameter is set to YES, event 5A measurement is delivered.

NO, YES

Event 6A1 measurement switch when BeUlEvTrigInd is SET Measurement set to SINGLE for BeUlQos6A1 QOSACT(Optio Enumeratio NO, YES Of 6A1 Switch BE service. If this McSwitch nal) n Type parameter is set to YES, event 6A1 measurement is delivered.

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第75页,共3267页

162734118.xls.ms_office1
UL event 6D measurement switch for BE SET Measurement service. If this BeUlQos6D QOSACT(Optio Of 6D Switch parameter is set to McSwitch nal) YES, event 6D measurement is delivered. Timer to trigger the next QoS enhancement action for UL BE services. This parameter specifies the duration of waiting for the UL QoS Wait Timer SET enhanced BeUlRateAdj For BE Uplink QOSACT(Optio acknowledgement TimerLen Rate nal) after UL rate adjustment. The timer starts when the BE UL rate adjustment procedure is triggered, and stops when the RNC receives a 6B1/6B2 event or when the timer

文档密级:

Enumeratio NO, YES n Type

NO, YES

Interval Type

20~64000

20~64000

detect BFDDETEC multiplier of TCOUNT BFD packet

This parameter specifies the number of times the BFD packets STR time out. If Interval IPCHK(Optiona several Type l) consecutive packets are not received, the BFD session is regarded as down.

3~10

3 to 10

8/7/2013

华为机密,未经许可不得扩散

第76页,共3267页

162734118.xls.ms_office1
The MAC-c flow on the Iub interface will increase after Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends background service data on the Iub interface. The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends background service data on the Iub interface.

文档密级:

BGGBR

Background MAC-c flow GBR

Interval Type

1~1000

1~1000

BGMBR

Background MAC-c flow MBR

Interval Type

1~2000

1~2000

8/7/2013

华为机密,未经许可不得扩散

第77页,共3267页

162734118.xls.ms_office1
This parameter is applied when [PARA]BGNSwit ch[/PARA] is set to ON. (1) If the difference of measured background noise without filtered and the current background noise Background ADD is larger than the Interval BgnAbnormal noise abnormal CELLCAC(Opti RTWP threshold, Type Thd threshold onal) the background noise will not be updated. (2) If the difference of new background noise and the configured value is larger than the RTWP threshold, the background noise will not be updated. Only when the measured background noise's duration reaches this parameter, the output of the autoadaptive background noise update filter could be regarded as ADD effect background Interval CELLCAC(Opti noise, and the Type onal) current value is replaced with the new one. At the same time, the auto-adaptive status should be restarted; otherwise, the output could not be regarded as the effective background noise.

文档密级:

1~400

0.1~40, step:0.1

Background noise update BGNAdjustTi continuance meLen time

1~6000

1~6000

8/7/2013

华为机密,未经许可不得扩散

第78页,共3267页

162734118.xls.ms_office1
(1) This parameter, along with the [Algorithm start time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background ADD noise automatic Compound hour, min, CELLCAC(Ma updata algorithm Type sec ndatory) is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise

文档密级:

Background BgnEndTime noise update end time

hour{0~23} , min{0~59}, sec{0~59}

8/7/2013

华为机密,未经许可不得扩散

第79页,共3267页

162734118.xls.ms_office1

文档密级:

Equivalent user number BGNEqUser threshold for NumThd background noise

When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as background noise. Therefore, the measured RTWP could be input to ADD the auto-adaptive Interval CELLCAC(Opti background noise Type onal) update filter; otherwise, the RTWP could not be regarded as background noise, and should not be input to the filter, and at the same time, the autoadaptive status should be reset.

0~10

0~10

8/7/2013

华为机密,未经许可不得扩散

第80页,共3267页

162734118.xls.ms_office1
(1) This parameter, along with the [Algorithm stop time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background Background ADD noise automatic noise update CELLCAC(Ma BgnStartTime updata algorithm start time ndatory) is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise When the parameter is 'OFF', the autoAuto-adaptive adaptive ADD background background noise BGNSwitch CELLCAC(Opti noise update update algorithm onal) switch is switched off. Otherwise, the algorithm is switched on.

文档密级:

Compound hour, min, Type sec

hour{0~23} , min{0~59}, sec{0~59}

Enumeratio OFF, ON n Type

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第81页,共3267页

162734118.xls.ms_office1

文档密级:

Background noise update BgnUpdateTh trigger d threshold

The difference of RTWP that trigger the update of background ADD noise. If the Interval CELLCAC(Opti difference is Type onal) larger than the threshold, the background will be updated.

1~100

0.1~10, step:0.1

Target value of service BLERQuality DCH_BLER

This parameter specifies the target transmission quality of DCH, that is, target BLER of DCH on the radio interface if the subflow is carried on DCH. This QoS-related parameter is used by the CRNC to ADD determine the Interval TYPRABOLPC target SIR value Type (Mandatory) for use in admission and power control. To calculate the value of this parameter, obtain the result of 10*Lg(BLER) where the BLER refers to the actual BLER, and then round the result up.

-63~0

5*10^(7)~1

8/7/2013

华为机密,未经许可不得扩散

第82页,共3267页

162734118.xls.ms_office1
Indicating whether to perform blind handover. FALSE: The cell is not in the alternative cells for blind handover, so blind handover to this cell cannot be triggered. TRUE: The cell is in the alternative cells for blind handover, so blind handover to this cell might be triggered. This parameter is used in the algorithm of the load reshuffling (LDR) intrafrequency blind handover. This parameter defines how many measurement reports are needed for making the blind handover decision. The RNC starts blind handover only if the UE continuously reports adequate intra-frequency measurement reports that meet the quality requirements of blind handover. During the measurement process, if the UE reports an unqualified measurement report, the

文档密级:

BlindHoFlag

Blind handover flag

ADD GSMNCELL(O ptional) ADD INTERFREQN CELL(Optional)

FALSE, Enumeratio TRUE n Type

FALSE,TR UE

Intrafrequency measurement SET BlindHOIntra report amount INTRAFREQH freqMRAmou of blind O(Optional) nt handover

D1, D2, Enumeratio D4, D8 n Type

1,2,4,8

8/7/2013

华为机密,未经许可不得扩散

第83页,共3267页

162734118.xls.ms_office1
This parameter specifies the intrafrequency measurement report interval of blind handover. It determines the intra-frequency measurement reporting interval of Load Reshuffling (LDR) blind handover. The Intrafrequency smaller the value SET BlindHOIntra measurement of this parameter, D250, INTRAFREQH Enumeratio freqMRInterv report interval the smaller the D500 O(Optional) n Type al of blind HO intra-frequency measurement reporting interval, and the smaller the time for intrafrequency measurement. But the greater the influence of signal fluctuation, which can result in wrong handover. On the contrary, the larger the value of Indicating the priority of blind handover. The value 0 represents the highest priority. Priorities 0~15 are assigned to concentric Blind ADD neighboring cells, Interval BlindHOPrio handover GSMNCELL(M which can ensure 0~30 Type Priority andatory) successful handover. Priorities 16~30 are assigned to neighboring cells for blind handover, which cannot ensure successful handover.

文档密级:

250,500

0~30

8/7/2013

华为机密,未经许可不得扩散

第84页,共3267页

162734118.xls.ms_office1
Blind handover condition. If the value is not 115, the handover is defined as Conditional Blind HO, which is used for the interfrequency neighboring cells Interval of the same Type coverage. If the value is 115, the handover is defined as Direct Blind HO, which is used for the interfrequency neighboring cells of larger coverage. This parameter specifies the quality threshold for the event 1F reported cell to trigger blind handover. This parameter defines the lowest quality threshold of the emergency blind handover. The blind handover is implemented only if the signal quality in the cell, Interval which reports Type event 1F, exceeds the specified threshold. Otherwise, the report will be discarded. This parameter is set to raise the possibility of successful blind handover. If the signal quality in the cells that report event 1F are all very poor,

文档密级:

Blind BlindHOQual handover ityCondition condition

ADD INTERFREQN CELL(Optional)

-115~-25

-115~-25

ADD CELLINTRAF 1F event blind REQHO(Option handover BlindHORSC al) trigger P1FThreshold SET condition INTRAFREQH O(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第85页,共3267页

162734118.xls.ms_office1

文档密级:

Blocking BLOREQTM request timer R

This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for blocking an AAL2 path.

Interval Type

2000~6000 2000~6000 0 0

boxflg

Report Flag

This parameter SET specifies the flag nonrpt(Not BOXRPT(Mand for reporting the Enumeratio Report), nonrpt,rpt atory) alarm to the alarm n Type rpt(Report) box. ADD This parameter BRD(Mandator specifies the y) board class.

BRDCLASS Board class

INT, DPU, Enumeratio INT,DPU,X XPU n Type PU

BRDTYPE

Board type

PEUa, AEUa, FG2a, This parameter GOUa, ADD specifies the type Enumeratio AOUa, BRD(Optional) of a board. n Type POUa, UOIa, SPUa, DPUb SET This parameter FG2a, ETHPORT(Ma specifies the type Enumeratio GOUa ndatory) of a board. n Type ADD This parameter PEUa, PPPLNK(Mand specifies the type Enumeratio POUa, atory) of a board. n Type UOIa ADD This parameter PEUa, MPLNK(Manda specifies the type Enumeratio POUa tory) of a board. n Type

PEUa,AEU a,FG2a,GO Ua,AOUa,P OUa,UOIa, SPUa,DPU b

BRDTYPE

Board type.

FG2a, GOUa PEUa, POUa, UOIa

BRDTYPE

Board type

BRDTYPE

Board type

PEUa,POU a

8/7/2013

华为机密,未经许可不得扩散

第86页,共3267页

162734118.xls.ms_office1
Base Station Identity Code (BSIC) verification switch. 1. BSIC(Base Station Identity Code): identity code of the base station. 2. This parameter is used to control cells where interRAT REQUIRE measurement D(Verify REQUIRE reports are mode), Enumeratio D, triggered. When NOT_REQ n Type NOT_REQ the value is UIRE(NonUIRE REQUIRED, the verify measurement mode) report is triggered after the BSIC of the measured cell is deciphered correctly; when the value is NOT_REQUIRE, measurement reporting is triggered whatever the BSIC is AEUa, This parameter PEUa, AEUa,AOU specifies the type Enumeratio AOUa, a,PEUa,PO of a board. n Type POUa Ua AEUa, AEUa, This parameter PEUa, PEUa, specifies the type Enumeratio AOUa, AOUa, of a board. n Type POUa POUa

文档密级:

BSICVerify

BSIC verify switch

ADD CELLINTERR ATHONCOV( Optional) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO NCOV(Optional ) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)

BT

Board type

SET E1T1LOP(Man datory) LOP E1T1(Mandator y)

BT

Board type

BT

Board type

PEUa(PEUa ), STR This parameter AEUa(AEU E1T1TST(Man specifies the type Enumeratio a), datory) of a board. n Type AOUa(AO Ua), POUa(POU a)

AEUa, PEUa, AOUa, POUa

8/7/2013

华为机密,未经许可不得扩散

第87页,共3267页

162734118.xls.ms_office1

文档密级:

BT

Board type

SCUa, GCUa, GCGa, This parameter SPUa, specifies the type DPUb, LOD of the board PEUa, PATCH(Manda Enumeratio where the AEUa, tory) n Type command is FG2a, executed. GOUa, AOUa, POUa, UOIa, ALL AEUa, SET This parameter PEUa, CLK(Mandator specifies the type Enumeratio AOUa, y) of a board. n Type POUa,

SCUa, GCUa, GCGa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, ALL AEUa, PEUa, AOUa, POUa,

BT

Board type

BT

Board type

AEUa, SET This parameter PEUa, E1T1(Mandator specifies the type Enumeratio AOUa, y) of a board. n Type POUa

AEUa, PEUa, AOUa, POUa

BT

Board type

SCUa, GCUa/GCG a, SPUa, This parameter SET DPUb, specifies the type CPUTHD(Man Enumeratio AEUa/PEU of the board to be datory) n Type a/AOUa/U set. OIa/FG2a/G OUa/POUa, MPU

SCUa, GCUa/GCG a, SPUa, DPUb, AEUa/PEU a/AOUa/FG 2a/GOUa/P OUa/UOIa, MPU

BT

Board Type

ADD This parameter AEUa, IMAGRP(Mand specifies the type Enumeratio AOUa atory) of a board. n Type

AEUa, AOUa

BT

Board type

SET This parameter AOUa, OPT(Mandatory specifies the type Enumeratio POUa, ) of a board. n Type UOIa

AOUa, POUa, UOIa

8/7/2013

华为机密,未经许可不得扩散

第88页,共3267页

162734118.xls.ms_office1

文档密级:

BT

Board type

ADD This parameter AEUa, ATMLOGICPO specifies the type Enumeratio AOUa, RT(Optional) of a board. n Type UOIa

AEUa, AOUa, UOIa

BWADJ

Auto adjust bandwidth switch

This parameter specifies whether the dynamic bandwidth ADD adjustment switch IPLOGICPORT Enumeratio OFF, ON for the logical (Optional) n Type port is turned on. The function must be used together with IPPM.

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第89页,共3267页

162734118.xls.ms_office1

文档密级:

Backward BWDCONG congestion BW threshold

ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) ADD FRALNK(Optio nal) ADD UNILNK(Optio nal) ADD MPGRP(Option al)

When the remaining receive bandwidth is smaller than or Interval equal to this Type parameter value, the backward congestion alarm is triggered.

0~1000000

0 to 1000000

8/7/2013

华为机密,未经许可不得扩散

第90页,共3267页

162734118.xls.ms_office1

文档密级:

Backward BWDCONG congestion BW threshold

This parameter specifies the backward congestion threshold. When ADD the remaining Interval IPLOGICPORT bandwidth Type (Optional) reaches this parameter value, the backward congestion alarm is reported.

0~100000

0~100000

Backward BWDCONG congestion BW threshold

This parameter specifies the remaining ADD bandwidth Interval ATMLOGICPO threshold for Type RT(Optional) generating the backward congestion alarm.

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第91页,共3267页

162734118.xls.ms_office1

文档密级:

Backward BWDCONG congestion BW threshold

If the available backward bandwidth is less ADD than or equal to Interval AAL2PATH(O this value, the Type ptional) backward congestion alarm is emitted.

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第92页,共3267页

162734118.xls.ms_office1

文档密级:

Backward BWDCONG congestion BW threshold

If the available backward bandwidth is less ADD than or equal to Interval IPPATH(Option this value, the Type al) backward congestion alarm is emitted.

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第93页,共3267页

162734118.xls.ms_office1

文档密级:

Backward BWDCONG congestion BW threshold

If the available backward bandwidth is less ADD than or equal to Interval RSCGRP(Optio this value, the Type nal) backward congestion alarm is emitted.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第94页,共3267页

162734118.xls.ms_office1

文档密级:

ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) Backward ADD BWDCONG congestion FRALNK(Optio CLRBW clear threshold nal) ADD UNILNK(Optio nal) ADD MPGRP(Option al)

When the remaining receive bandwidth is greater than this Interval parameter value, Type the backward congestion alarm is cleared.

0~1000000

0 to 1000000

8/7/2013

华为机密,未经许可不得扩散

第95页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the backward congestion clear threshold. When Backward ADD the remaining Interval BWDCONG congestion IPLOGICPORT bandwidth Type CLRBW clear threshold (Optional) reaches this parameter value, the backward congestion alarm is cleared.

0~200000

0~200000

This parameter specifies the remaining Backward ADD bandwidth BWDCONG congestion ATMLOGICPO threshold for CLRBW clear threshold RT(Optional) clearing the backward congestion.

Interval Type

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第96页,共3267页

162734118.xls.ms_office1

文档密级:

If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion AAL2PATH(O value, the Type CLRBW clear threshold ptional) backward congestion alarm is cleared.

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第97页,共3267页

162734118.xls.ms_office1

文档密级:

If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion IPPATH(Option value, the Type CLRBW clear threshold al) backward congestion alarm is cleared.

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第98页,共3267页

162734118.xls.ms_office1

文档密级:

If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion RSCGRP(Optio value, the Type CLRBW clear threshold nal) backward congestion alarm is cleared.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第99页,共3267页

162734118.xls.ms_office1

文档密级:

Backward handover BWDHORSV reserved BW bandwidth

ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD UNILNK(Optio nal) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal)

This parameter specifies the Interval receive bandwidth Type reserved for the user in handover.

0~1000000

0 to 1000000

8/7/2013

华为机密,未经许可不得扩散

第100页,共3267页

162734118.xls.ms_office1

文档密级:

Backward handover BWDHORSV reserved BW bandwidth

This parameter specifies the backward ADD handover reserved Interval IPLOGICPORT bandwidth. It is Type (Optional) the receive bandwidth reserved for the user in handover.

0~50000

0~50000

Backward handover BWDHORSV reserved BW bandwidth

This parameter specifies the ADD bandwidth ATMLOGICPO reserved for the RT(Optional) backward handover.

Interval Type

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第101页,共3267页

162734118.xls.ms_office1

文档密级:

Backward handover BWDHORSV reserved BW bandwidth

Reserved ADD backward AAL2PATH(O bandwidth for ptional) handover user.

Interval Type

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第102页,共3267页

162734118.xls.ms_office1

文档密级:

Backward handover BWDHORSV reserved BW bandwidth

Reserved ADD backward IPPATH(Option bandwidth for al) handover user.

Interval Type

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第103页,共3267页

162734118.xls.ms_office1

文档密级:

Backward handover BWDHORSV reserved BW bandwidth

Reserved ADD backward RSCGRP(Optio bandwidth for nal) handover user.

Interval Type

0~4000000 0~4000000

Max BWMAXRA bandwidth TIO estimate ratio

This parameter specifies the maximum bandwidth ADD estimate ratio. It Interval IPLOGICPORT is the ratio of the Type (Optional) bandwidth of each rate up to the current bandwidth.

100~1000

100~1000

8/7/2013

华为机密,未经许可不得扩散

第104页,共3267页

162734118.xls.ms_office1

文档密级:

BWMODE

Bandwidth Mode

Bandwidth mode.This ADD parameter is valid FULL_DUP FULL_DUP RSCGRP(Mand only when Enumeratio LEX, LEX, atory) Transport n Type HALF_DU HALF_DU Resource Group PLEX PLEX Type is IP.

BWRTPTH

Load Control algorithm BandWidth THD

This parameter specifies the bandwidth change threshold of the load control ADD algorithm. When Interval IPLOGICPORT the bandwidth Type (Optional) adjustment exceeds this threshold, the bandwidth of the logical port is updated. The parameter values are described as follows: NODEB_CREDI T_CAC_SWITC H: The system SET performs CAC Bit Field CACALGOSWI based on the Type TCH(Optional) usage state of NodeB credit. When the NodeB's credit is not enough, the system rejects new access requests.

0~100

0~100

CacSwitch

CAC algorithm switch

NODEB_C REDIT_CA NODEB_C C_SWITCH REDIT_CA (NodeB C_SWITCH Credit CAC Switch)

SET Indicating Call Shock Bit Field CallShockCtrl CALLSHOCKC whether to control Control Switch Type Switch TRL(Optional) call shock.

SYS_LEVE L(SYS_LE VEL), NODEB_L EVEL(NO DEB_LEV EL), CELL_LEV EL(CELL_

SYS_LEVE L,NODEB_ LEVEL,CE LL_LEVEL

8/7/2013

华为机密,未经许可不得扩散

第105页,共3267页

162734118.xls.ms_office1

文档密级:

Call Shock CallShockJud Judge Period gePeriod time length

Indicating the SET period of call CALLSHOCKC shock control TRL(Optional) judging.

Interval Type

1~5

1~5

Indicator of CarrierTypePr Carrier Type iorInd Priority

Decide which SET carrier is prior USERPRIORIT when ARP and Y(Optional) TrafficClass are both identical.

NONE, Enumeratio DCH, n Type HSPA

NONE,DC H,HSPA

CARRYF

Bearing subrack No.

Number of the ADD subrack from Interval AAL2PATH(M which the AAL2 Type andatory) Path is led out of RNC.

0~5

0~5

CARRYFLA G

Carry Flag

This field indicate whether ADD NULL, NULL, the IP Path is IPPATH(Option carried on IP Enumeratio IPLGCPOR IPLGCPOR al) n Type T, RSCGRP T, RSCGRP logic port or resource group or null.

8/7/2013

华为机密,未经许可不得扩散

第106页,共3267页

162734118.xls.ms_office1

文档密级:

ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma Bearing ndatory) CARRYFRA FRAATM link ADD ATMLNKN No. AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)

This parameter specifies the number of the fractional ATM Interval link bearing PVC. Type The fractional ATM link must have been configured.

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第107页,共3267页

162734118.xls.ms_office1

文档密级:

ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma Bearing IMA ndatory) CARRYIMA group No. ADD GRPN AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)

This parameter specifies the number of the IMA group Interval bearing the PVC. Type The IMA group must have been configured.

0~83

0 to 83

Bearing link CARRYLNK type T

SAAL, SCTP, SAAL-SCTP. When the NCP is based on ATM, set Bearing link SAAL(SAA type to SAAL. L Link Type When the NCP is ADD ), based on IP, set NCP(Mandatory SCTP(SCT Bearing link type ) to SCTP. When Enumeratio P Link ADD Type), the NCP is based n Type CCP(Mandatory SAALon ATM/IP, set ) SCTP(SAA Bearing link type L-SCTP to SAAL-SCTP. Link Tpye) For detailed information of this parameter, refer to 3GPP TS 25.430.

SAAL, SCTP, SAALSCTP

8/7/2013

华为机密,未经许可不得扩散

第108页,共3267页

162734118.xls.ms_office1

文档密级:

Bearing CARRYNCO NCOPT port PTN No.

ADD IPOAPVC(Man datory) ADD SAALLNK(Ma ndatory) ADD AAL2PATH(M andatory)

This parameter specifies the number of the port on the UOIa_ATM bearing VCL.

Interval Type

0~3

0 to 3

CARRYPN

Optical port No.

This parameter specifies the ADD Interval number of the ATMLOGICPO optical port that Type RT(Optional) carries the logical port.

0~3

0~3

8/7/2013

华为机密,未经许可不得扩散

第109页,共3267页

162734118.xls.ms_office1

文档密级:

CARRYSN

Bearing slot No.

ADD SAALLNK(Ma Number of the ndatory) slot bearing the ADD SAAL link. AAL2PATH(M andatory)

Interval Type

14~27

14~27

CARRYSRN

Bearing subrack No.

ADD Number of the SAALLNK(Ma subrack bearing ndatory) the SAAL link.

Interval Type

0~5

0~5

CARRYT

The bearing type of the logic port

CARRYT

The bearing type of the logical port

This parameter ADD specifies the IPLOGICPORT bearing type of a (Mandatory) logical port. This parameter specifies the bearing type of a logical port. If the ADD bearing type of a ATMLOGICPO logical port is RT(Mandatory) ATM, the upperlevel logical port must be a Hub logical port.

ETHER, Enumeratio PPP, n Type TRUNK

ETHER PPP TRUNK

IMA, UNI, FRA, Enumeratio NCOPT, n Type ATMLOGI CPORT

IMA,UNI,F RA,NCOPT ,ATMLOGI CPORT

8/7/2013

华为机密,未经许可不得扩散

第110页,共3267页

162734118.xls.ms_office1

文档密级:

CARRYT

Bearing type

ADD AAL2PATH(M andatory) ADD Type of the SAALLNK(Ma bearer. ndatory) ADD IPOAPVC(Man datory)

UNI, IMA, FRAATM, NCOPT, Enumeratio ATMLGCP n Type ORT, NULL

UNI, IMA, FRAATM, NCOPT, ATMLGCP ORT, NULL

8/7/2013

华为机密,未经许可不得扩散

第111页,共3267页

162734118.xls.ms_office1

文档密级:

Bearing UNI CARRYUNI link No. LNKN

ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma ndatory) ADD AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)

This parameter specifies the number of the Interval UNI link bearing Type PVC. The UNI link must have been configured.

0~167

0 to 167

CARRYVCI Bearing VCI

ADD SAALLNK(Ma ndatory) ADD IPOAPVC(Opti onal)

The value of bearing VCI.VCI Interval of the SAAL link Type that goes out of the RNC.

32~65535

32~65535

8/7/2013

华为机密,未经许可不得扩散

第112页,共3267页

162734118.xls.ms_office1

文档密级:

CARRYVPI

Bearing VPI

ADD SAALLNK(Ma ndatory) ADD IPOAPVC(Opti onal)

The value of bearing VPI.VPI Interval of the SAAL link Type that goes out of the RNC.

0~255

0~255

ADD IPOAPVC(Man datory) Bearing ADD CARRYVPN ATMLGCPOR SAALLNK(Ma T port No. ndatory) ADD AAL2PATH(M andatory)

This parameter specifies the number of the ATM logic port bearing VCL.

Interval Type

0~383

0 to 383

CBS CBC IP CBCIPADDR address

IP address of the ADD CBC (Cell IP Address CBSADDR(Ma Broadcast Type ndatory) Center).

0.0.0.0~255 .255.255.25 5

CBCMASK

Subnet mask

ADD Mask of the subIP Address CBSADDR(Ma network of the Type ndatory) CBC IP address.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第113页,共3267页

162734118.xls.ms_office1

文档密级:

CBS

This parameter ADD Consent burst specifies the IPLOGICPORT size maximum burst (Optional) size.

Interval Type

4500~3276 4500~3276 7 7

ADD CBS Operator QUICKCELLS A CBS Operator Interval CBSOpIndex Index ETUP(Mandato of the cell. Type ry)

0~3

0~3

CBSSAC

CBS SAC

ADD CELLCBSSAC( Mandatory) ADD QUICKCELLS ETUP(Mandato ry)

Together with PLMN code and Interval LAC, uniquely Type corresponding to a cell.

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第114页,共3267页

162734118.xls.ms_office1

文档密级:

CBSwitch

CB Switch

SET Switch of inner RNCCBPARA( CBS. Optional)

OFF(OFF), Enumeratio OFF, ON ON(ON) n Type

CCCHGBR

The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CCCH MACInterval CELLEFACH( CELL_FACH c flow GBR Type Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends common control channel data on the Iub interface.

1~1000

1~1000

8/7/2013

华为机密,未经许可不得扩散

第115页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CCCH MACInterval CCCHMBR CELLEFACH( CELL_FACH c flow MBR Type Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends common control channel data on the Iub interface.

文档密级:

1~2000

1~2000

Common CCHPRIPAT channel H primary path

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD Common channel AF42, TRMMAP(Opti Enumeratio primary path. AF43, EF, onal) n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第116页,共3267页

162734118.xls.ms_office1

文档密级:

Common channel pri CCHPRITH path load threshold

Common channel ADD bearing primary Interval LOADEQ(Opti path load Type onal) threshold.

0~100

0~100

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, Common ADD AF42, Common channel CCHSECPA channel TRMMAP(Opti Enumeratio AF43, EF, secondary path. TH secondary path onal) n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

Common channel Common ADD primary channel pri sec Interval CCHSECWH LOADEQ(Opti secondary path path load ratio Type T onal) load ratio threshold threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第117页,共3267页

162734118.xls.ms_office1
This parameter ADD specifies the 10, 100, ETHMA(Option period of sending Enumeratio 1000 al) the CCMs in an n Type MA.

文档密级:

CCM Send CCMINTER Prid VAL

10,100,1000

CCMODE

Activation mode

This parameter specifies the mode of ACT activating the CC AUTO, VCLCC(Option on the VCL. In Enumeratio AUTO,MA MANUAL al) AUTO mode, the n Type NUAL CC need not be activated on the peer.

CCTMR

Timer_CC

Protection timer started after the BGN, END, RS ADD or ER messages Interval SAALLNK(Opt are sent.If the Type ional) timer expires, these messages are resent.

100~1000

UNI: 700~1000 NNI: 100~1000

CDVT

Cell delay variation tolerance

This parameter specifies the ADD delay variation Interval ATMTRF(Opti that can be Type onal) tolerated. Physical unit: 0.1 us. When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for cell. Average altitude of the cell coverage area in the WGS-84 ADD coordinates. This Interval SMLCCELL(O is controlled by Type ptional) MTRLGY and valid when MET~0(metric system).

102400 to 1024~1330 1330000000 0000

AMR_RRC Number per CellAmrRrcN Second for um Cell

1~100

1~100

CellAverage Height

Cell Average Altitude

32767~327 32767~327 67 67

8/7/2013

华为机密,未经许可不得扩散

第118页,共3267页

162734118.xls.ms_office1
This parameter specifies the average altitude of the cell coverage area in ADD the WGS-84 SMLCCELL(O coordinates. This ptional) is controlled by MTRLGY and valid when IMP~1(British measurement). The algorithms with the above values represent are as follow: TX_DIVERSITY _ON_TO_OFF:W hen TX Diversity ADD is on to off,the CELLALGOS algorithms of cell WITCH(Option capacity auto al) handle is open. TX_DIVERSITY _OFF_TO_ON:W hen TX Diversity is off to on,the algorithms of cell capacity auto handle is open.

文档密级:

CellAverage HeightImp

Cell Average Altitude

Interval Type

107502~10 107502~10 7502 7502

Cell CellCapacity Capability AutoHandleS Auto Handle witch Switch

Bit Field Type

TX_DIVER SITY_ON_ TO_OFF(T X diversity capability is on to off), TX_DIVER SITY_OFF _TO_ON(T X diversity capability is off to on)

TX_DIVER SITY_ON_ TO_OFF, TX_DIVER SITY_OFF _TO_ON

8/7/2013

华为机密,未经许可不得扩散

第119页,共3267页

162734118.xls.ms_office1

文档密级:

1)DELAY_ACTI VATION_SUPP ORT (delay activation support indicator):when the indicator is TRUE, it means that the cell support delay activation. Delayed Activation IE indicates that the activation of the ADD Cell capability DL power shall CellCapConta NRNCCELL(M container be delayed until inerFdd andatory) an indicated CFN or until a separate activation indication is received. 2)HSDSCH_SUP PORT(HSDSCH support indicator):when the indicator is TRUE, it means that the cell support HSDSCH and enable downlink traffic Altitude of the cell center in the WGS-84 ADD coordinates. This Cell Center CellCenterAlt SMLCCELL(O is controlled by Altitude itude ptional) MTRLGY and valid when MET~0(metric system). This parameter specifies the altitude of the cell center in the ADD WGS-84 Cell Center CellCenterAlt SMLCCELL(O coordinates. This Altitude itudeImp ptional) is controlled by MTRLGY and valid when IMP~1(British measurement).

Bit Field Type

DELAY_A CTIVATIO N_SUPPOR T(delay activation support indication), HSDSCH_S UPPORT(H SDSCH support indication), FDPCH_SU PPORT(FDPCH support indication), EDCH_SU PPORT(EDCH support indication), EDCH_2M S_TTI_SUP PORT(EDCH 2ms TTI support indicator), EDCH_2SF 2_AND_2S F4_SUPPO

DELAY_A CTIVATIO N_SUPPOR T,HSDSCH _SUPPORT ,FDPCH_S UPPORT,E DCH_SUPP ORT,EDCH _2MS_TTI_ SUPPORT, EDCH_2SF 2_AND_2S F4_SUPPO RT,EDCH_ 2SF2_SUPP ORT,EDCH _2SF4_SUP PORT,EDC H_SF4_SU PPORT,ED CH_SF8_S UPPORT,E DCH_HAR Q_IR_COM BIN_SUPP ORT,EDCH _HARQ_C HASE_CO MBIN_SUP PORT,CPC

Interval Type

32767~327 32767~327 67 67

Interval Type

107502~10 107502~10 7502 7502

8/7/2013

华为机密,未经许可不得扩散

第120页,共3267页

162734118.xls.ms_office1
Latitude of the cell center in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. ADD For example, the Interval SMLCCELL(O value Type ptional) corresponding to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree This parameter specifies the latitude of the cell center in the WGS-84 coordinates. The ADD input format is SMLCCELL(O String Type ddd:mm:ss.ssss. ptional) This is controlled by GCDF and valid when SEC~1(degree, minute, second format).

文档密级:

Cell Center CellCenterLat Latitude itude

-90~90, 90000000~ step: 90000000 0.000001

Cell Center CellCenterLat Latitude itudeSec

-

-90~90

8/7/2013

华为机密,未经许可不得扩散

第121页,共3267页

162734118.xls.ms_office1
Longitude of the cell center in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. ADD For example, the Interval SMLCCELL(O value Type ptional) corresponding to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree This parameter specifies the longitude of the cell center in the WGS-84 coordinates. The ADD input format is SMLCCELL(O String Type ddd:mm:ss.ssss. ptional) This is controlled by GCDF and valid when SEC~1(degree, minute, second format).

文档密级:

Cell Center CellCenterLo Longitude ngitude

-180~180, 180000000 step: ~18000000 0.000001 0

Cell Center CellCenterLo Longitude ngitudeSec

-

-180~180

CellChoice

Target cell choice

ALLCELL( HO Indicating the All cell), ALLCELL, CELL(Mandato target cell choose Enumeratio 3GCELL(3 3GCELL,G ry) method. n Type G cell), SMCELL GSMCELL( GSM cell)

8/7/2013

华为机密,未经许可不得扩散

第122页,共3267页

162734118.xls.ms_office1

文档密级:

Cell CellEnvironm Environment ent Case

ADD Environment SMLCCELL(O type of the cell ptional) coverage area.

NLOS_EN VIRONME NT, Enumeratio LOS_ENVI n Type RONMENT , MIXED_E NVIRONM

NLOS_EN VIRONME NT, LOS_ENVI RONMENT , MIXED_E NVIRONM

Cell CellEnvType environment type

ADD CELLCAC(Opti onal)

Cell Altitude Standard CellHeightStd Deviation

ADD SMLCCELL(O ptional)

Cell Altitude CellHeightStd Standard Imp Deviation

ADD SMLCCELL(O ptional)

HiPri_RRC Number per CellHighPriR Second for rcNum Cell

SET CALLSHOCKC TRL(Optional)

Defining the radio environment type of the cell, such as a typical town cell, urban cell, and mountain area cell. Deviation of altitude standard in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). This parameter specifies the standard deviation of altitude in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). When call shock control starts, the register and 3G>2G reselect number can be accessed per second for cell.

TU, RA, Enumeratio HT n Type

TU, RA, HT

Interval Type

10000~100 10000~100 00 00

Interval Type

32808~328 32808~328 08 08

Interval Type

1~100

1~100

Cell Host CellHostType Type

ADD This parameter SINGLE_H NRNCCELL(O specifies the host Enumeratio OST, ptional) type of a cell. n Type DOUBLE_ HOST

SINGLE_H OST, DOUBLE_ HOST

8/7/2013

华为机密,未经许可不得扩散

第123页,共3267页

162734118.xls.ms_office1
ADD CELLSETUP( Mandatory) ADD GPS(Mandatory ) ADD CELLCMCF(M andatory) ADD CELLINTRAF REQHO(Manda tory) ADD CELLQOSHO( Mandatory) ADD GSMNCELL(M andatory) ADD CELLINTERFR EQHOCOV(Ma ndatory) ADD CELLINTERFR EQHONCOV( Mandatory) ADD CELLHOCOM M(Mandatory) ADD CELLINTERR

文档密级:

CellId

Cell ID

Uniquely identifying a cell. For detailed Interval information of Type this parameter, refer to 3GPP TS 25.401.

0~65535

0~65535

Cell ID Changing CellIDChgPer Period time iod length

This parameter is valid when [Cell SET ID Changing Interval CIDCHG(Optio Switch] is ON. Type nal) Indicate the period of cell ID changing. Indicating SET whether to use CIDCHG(Optio changing cell id nal) in UU interface.

1~31

1~31

Cell ID CellIDChgSw Changing itch Switch

Enumeratio OFF, ON n Type

OFF,ON

Flag of ADD CELLID+RTT CELLID+RTT CellidRttActi SMLCCELL(O Method Active location vateFlag ptional) Flag activation.

Enumeratio INACTIVE, INACTIVE, n Type ACTIVE ACTIVE

8/7/2013

华为机密,未经许可不得扩散

第124页,共3267页

162734118.xls.ms_office1
UE positioning mode when the CELLID+RTT method is selected. The UE SET supports both UECELLIDRTT CELLID+RTT SMLC(Optional based MethodType Method Type ) CELLID+RTT mode and UEassisted CELLID+RTT mode. Cell SF reserved threshold. The code load reshuffling could be triggered only when the minimum available SF of a cell is higher than this threshold. The lower the code resource LDR trigger threshold is, the easier the Cell LDR SF ADD downlink code CellLdrSfRes reserved CELLLDR(Opti resource enters Thd threshold onal) the initial congestion status, the easier the LDR action is triggered, and the easier the subscriber perception is affected. But a lower code resource LDR trigger threshold causes a higher admission success rate because the

文档密级:

UE_BASE D, UE_ASSIS TED, Enumeratio UE_BASE n Type D_PREFER RED, UE_ASSIS TED_PREF ERRED

UE_BASE D, UE_ASSIS TED, UE_BASE D_PREFER RED, UE_ASSIS TED_PREF ERRED

SF4(SF4), SF8(SF8), SF16(SF16) , SF32(SF32) , Enumeratio SF64(SF64) n Type , SF128(SF1 28), SF256(SF2 56)

SF4, SF8, SF16, SF32, SF64, SF128, SF256

ADD Cell location Cell Location CellLocCfgT SMLCCELL(M configuration Setting Type ype andatory) type.

CELL_AN TENNA, Enumeratio CELL_CEN n Type TER, BOTH

CELL_AN TENNA, CELL_CEN TER, BOTH

8/7/2013

华为机密,未经许可不得扩散

第125页,共3267页

162734118.xls.ms_office1
ADD CELLSETUP( Mandatory) ADD QUICKCELLS Identifying a cell String Type ETUP(Mandato name. ry) ADD NRNCCELL(M andatory)

文档密级:

CellName

Cell name

1~31 characters

If the cell downlink load exceeds this threshold, the algorithm will decrease the pilot transmit power of the cell so as to increase the whole system's capacity. This parameter is based on network planning. When ADD Cell overload the cell breathing Interval CellOverrunT CELLLDB(Opti threshold algorithm is Type hd onal) activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased.

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第126页,共3267页

162734118.xls.ms_office1
If the times the UE in the CELL_PCH state performs cell reselection is greater than or equal to the threshold, it is regarded that the cell reselection is frequent. When the timer expires, the target state is set to URA_PCH. In the next cell update procedure, the UE is informed of state transition to URA_PCH in the CELL_UPDATE _CONFIRM message. Length of the cell reselection frequency timer. This parameter is used together with CellReSelectCou nter to detect the frequency of cell reselection of the UE in the CELL_PCH state. Indicating whether the cell is reserved for extension. If [Cell barred indicator] is NOT_BARRED, and the cell is not reserved for operators but for extension, the UEs regard the cell as barred. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

Cell Reselection CellReSelect Counter Counter Threshold

SET UESTATETRA NS(Optional)

Interval Type

1~65535

1~65535

Cell CellReSelect Reselection Timer Timer

SET UESTATETRA NSTIMER(Opti onal)

Interval Type

1~65535

1~65535

Cell CellReservati reservation onExtension extension

ADD CELLACCESS STRICT(Option al)

RESERVE Enumeratio D, n Type NOT_RESE RVED

RESERVE D, NOT_RESE RVED

8/7/2013

华为机密,未经许可不得扩散

第127页,共3267页

162734118.xls.ms_office1

文档密级:

Cell reserved CellReserved for operator ForOperatorU use se

Indicating whether the cell is reserved for operators. If [Cell barred indicator] is NOT_BARRED, and the cell is reserved for operators, the UEs allocated ADD with Access Class RESERVE RESERVE CELLACCESS 11 or 15 in the Enumeratio D, D, STRICT(Option local PLMN can n Type NOT_RESE NOT_RESE al) select or reselect RVED RVED the cell. While the UEs allocated with Access Class 0~9, 12 and 14 cannot select or reselect the cell. For detailed information of this parameter, refer to 3GPP TS 25.331. Flag of whether adding a cell into the active set will affect the relative threshold of the event 1A. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold ADD AFFECT, AFFECT,N of the event 1A INTRAFREQN Enumeratio NOT_AFFE OT_AFFEC NOT_AFFECT: CELL(Optional) n Type CT T Adding the cell into the active set does not affect the relative threshold of the event 1A. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1A.

Affect 1A CellsForbidde threshold flag n1A

8/7/2013

华为机密,未经许可不得扩散

第128页,共3267页

162734118.xls.ms_office1
Flag of whether adding a cell into the active set will affect the relative threshold of the event 1B. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold ADD AFFECT, AFFECT,N of the event 1B INTRAFREQN Enumeratio NOT_AFFE OT_AFFEC NOT_AFFECT: CELL(Optional) n Type CT T Adding the cell into the active set does not affect the relative threshold of the event 1B. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1B.

文档密级:

Affect 1B CellsForbidde threshold flag n1B

When the RRC REQ total number Cell Call SET of one cell reach Interval CellTotalRrc Shock Trigger CALLSHOCKC this threshold the Type NumThd Threshold TRL(Optional) RRC flow control will be triggered.

1~100

1~100

8/7/2013

华为机密,未经许可不得扩散

第129页,共3267页

162734118.xls.ms_office1

文档密级:

If the cell downlink load is lower than this threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other cells. This parameter is based on network planning. When ADD the cell breathing Cell underload Interval CellUnderrun CELLLDB(Opti algorithm is threshold Type Thd onal) activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased. ADD CELLSETUP( Mandatory) ADD QUICKCELLS RAC ETUP(Mandato Configuration ry) Indication ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory)

0~100

0~1, step:0.01

CfgRacInd

This parameter indicates whether RAC is configured. If the NOT_REQ NOT_REQ RNC supports the Enumeratio UIRE, UIRE, PS domain, the n Type REQUIRE REQUIRE value of this parameter must be REQUIRE.

8/7/2013

华为机密,未经许可不得扩散

第130页,共3267页

162734118.xls.ms_office1
Channel configuration strategy switch. 1) CFG_DL_BLIND _DETECTION_S WITCH: When the switch is on, the DL blind transport format detection function is used for single SRB and AMR+SRB SET bearers. Note that Channel CORRMALGO the UE is only Bit Field configuration SWITCH(Optio required to Type strategy switch nal) support the blind transport format stipulated in 3GPP 25.212 section 4.3.1. 2) CFG_HSDPA_64 QAM_SWITCH: When the switch is on, 64QAM can be configured for the HSDPA service. 3) CFG_HSDPA_M

文档密级:

CfgSwitch

CFG_DL_B LIND_DET ECTION_S WITCH, CFG_HSDP A_64QAM _SWITCH, CFG_HSDP A_MIMO_ SWITCH, CFG_HSPA _DTX_DR X_SWITC H, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH, CFG_IMS_ SUPPORT_ SWITCH, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH, CFG_LOSS LESS_REL OC_CFG_S WITCH, CFG_MUL

CFG_DL_B LIND_DET ECTION_S WITCH, CFG_HSDP A_64QAM _SWITCH, CFG_HSDP A_MIMO_ SWITCH, CFG_HSPA _DTX_DR X_SWITC H, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH, CFG_IMS_ SUPPORT_ SWITCH, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH, CFG_LOSS LESS_REL OC_CFG_S WITCH, CFG_MUL

8/7/2013

华为机密,未经许可不得扩散

第131页,共3267页

162734118.xls.ms_office1
This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher technique after channel handover is completed, the Channel Retry SET handover ChannelRetry Ho Timer COIFTIMER(O protection timer HoTimerLen Length ptional) will be started. When the timer expires, the RNC will try to carry services on channels based on a higher technique. Channel retry cannot be performed before this timer expires. This parameter specifies the value of the channel retry timer. The timer will start after traffic is set up or reconfigured, if SET higher technique Channel Retry ChannelRetry COIFTIMER(O is available. Timer Length TimerLen ptional) Channel retry will be performed after this timer expires. If the value of the parameter is set to 0, channel retry cannot be performed. The coding type of a transport channel.For ADD Channel code detailed ChCodingTyp FACH(Optional type information of e ) this parameter, refer to 3GPP TS 25.212.

文档密级:

Interval Type

0~999

0~999

Interval Type

0~180

0~180

NO_CODI NG, Enumeratio CONVOLU n Type TIONAL, TURBO

NO_CODI NG,CONV OLUTION AL,TURBO

8/7/2013

华为机密,未经许可不得扩散

第132页,共3267页

162734118.xls.ms_office1

文档密级:

Ping Check CHECKCOU Timeout NT Counts

IP Path Ping Timeout Counts.The IP ADD Path fault alarm Interval IPPATH(Option will occur when Type al) the number of unsuccessful ping operation reaches this value.

1~5

1~5

ChIdx

SET Channel index Channel Index MBMSPERF(M for MBMS andatory) performance.

CH0(Chann el 0), CH1(Chann el 1), CH0,CH1,C Enumeratio CH2(Chann H2,CH3,CH n Type el 2), 4 CH3(Chann el 3), CH4(Chann el 4)

CHKN

Check Index

This parameter specifies the index of the BFD. ADD The check index IPPATHBIND( is unique. If the Mandatory) check index is not Interval STR Type specified, a IPCHK(Optiona unique value l) ranging from 0 to 31 is automatically allocated.

0~31

0 to 31

Calculate checksum CHKSUMRX when receive message

Whether to ADD calculate the SCTPLNK(Opti checksum during Enumeratio NO, YES onal) message n Type receiving.

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第133页,共3267页

162734118.xls.ms_office1

文档密级:

Calculate checksum CHKSUMTX when send message

Whether to ADD calculate the SCTPLNK(Opti Enumeratio NO, YES checksum during onal) n Type message sending.

NO, YES

Checksum CHKSUMTY arithmetic PE

According to RFC4960, ADD ALDER32 is not ALDER32, ALDER32, SCTPLNK(Opti suitable for Enumeratio CRC32 CRC32 onal) checksum in n Type SCTP, CRC32 is recommended.

This parameter STR specifies the type CHKTYPE Check type IPCHK(Mandat of the check on ory) gateway. If you set this parameter to TEN_MSEC, use [DL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If SET you set this Time unit for LDM(Optional) ChoiceRprtU parameter to DL basic meas SET nitForDlBasic MIN, use [DL rprt cycle SATLDM(Opti Meas basic meas rprt onal) cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.

SBFD, Enumeratio ARP, n Type MBFD

SBFD, ARP, MBFD

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

8/7/2013

华为机密,未经许可不得扩散

第134页,共3267页

162734118.xls.ms_office1
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [DL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA need pwr meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

SET Time unit for LDM(Optional) ChoiceRprtU DL OLC meas SET nitForDlOlcM rprt cycle SATLDM(Opti eas onal)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

SET Time unit of LDM(Optional) ChoiceRprtU HSDPA need SET nitForHsdpaP pwr meas cycle SATLDM(Opti wrMeas onal)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

8/7/2013

华为机密,未经许可不得扩散

第135页,共3267页

162734118.xls.ms_office1
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If SET you set this Time unit of LDM(Optional) parameter to ChoiceRprtU HSDPA bit SET MIN, use nitForHsdpaR rate meas cycle SATLDM(Opti [HSDPA bit rate ateMeas onal) meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this Time unit of parameter to ChoiceRprtU SET HSUPA bit MIN, use nitForHsupaR LDM(Optional) rate meas cycle [HSDPA bit rate ateMeas meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

8/7/2013

华为机密,未经许可不得扩散

第136页,共3267页

162734118.xls.ms_office1
Value range: TEN_MSEC, MIN Physical value range: 10 milliseconds, 1 minute Content: If you set this parameter to TEN_MSEC, use [UL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL basic meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: If you set this parameter to TEN_MSEC, use [UL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

SET Time unit for LDM(Optional) ChoiceRprtU UL basic meas SET nitForUlBasic rprt cycle SATLDM(Opti Meas onal)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

SET Time unit for LDM(Optional) ChoiceRprtU UL OLC meas SET nitForUlOlcM rprt cycle SATLDM(Opti eas onal)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

8/7/2013

华为机密,未经许可不得扩散

第137页,共3267页

162734118.xls.ms_office1
This parameter specifies the reporting period of the event E of the AMR service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event F of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the VP service. The unit of the reporting period can be 10 ms or minute. This switch determines whether to take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel for independent MBMS measurement.

文档密级:

AMR Reporting ChoiceRptUn Period Unit itForAmrE For Event E

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

ADD CELLQUALIT BE Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForBeE For Event E SET QUALITYME AS(Optional)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

ADD CELLQUALIT BE Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForBeF For Event F SET QUALITYME AS(Optional)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

ADD CELLQUALIT VP Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForVpE For Event E SET QUALITYME AS(Optional)

Enumeratio TEN_MSE TEN_MSE n Type C, MIN C, MIN

ChSwitch

Channel Switch

SET MBMSPERF(M andatory)

OFF(OFF), Enumeratio OFF,ON ON(ON) n Type

8/7/2013

华为机密,未经许可不得扩散

第138页,共3267页

162734118.xls.ms_office1

文档密级:

CID

GSM cell ID

ADD Identifying a GSMCELL(Ma GSM cell. ndatory)

Interval Type

0~65535

0~65535

CIO

This parameter works with the offset of neighboring celloriented Cell Individual Offset (CIO). It is used for intra- or interfrequency handover decisions. The larger the sum, the higher the ADD handover priority CELLSETUP(O of the Cell oriented ptional) neighboring cell. Interval Cell Individual ADD The smaller the Type Offset NRNCCELL(O sum, the lower ptional) the handover priority of the neighboring cell. Usually it is configured to 0. The larger the parameter, the easier of the handover to the neighboring cell. The smaller the parameter, the harder the handover to the

-20~20

-10~10, step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第139页,共3267页

162734118.xls.ms_office1
It is set according to the topographic feature. This parameter is used for the interRAT handover decision in combination with the neighboring cell oriented CIO. The larger the sum, the higher the handover priority of the GSM cell. The ADD smaller the sum, Interval GSMCELL(Opt the lower the Type ional) handover priority of the GSM cell. The parameter is generally set to 0. As for the impact on network performance: The larger the value of the parameter is, the easier it is to be handed over to the GSM network. The smaller the value Cell individual offset for the GSM cell, which is set according to the topographic feature. This parameter is used for decision making for the inter-RAT ADD handover. The Interval GSMNCELL(O larger the value of Type ptional) the parameter, the higher the handover priority of the GSM cell. The smaller the value of the parameter, the lower the handover priority of the GSM cell.

文档密级:

CIO

Cell Individual Offset

-50~50

-50~50

CIOOffset

Neighboring cell oriented CIO

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第140页,共3267页

162734118.xls.ms_office1

文档密级:

CIOOffset

Neighboring cell oriented CIO

ADD INTERFREQN CELL(Optional) ADD INTRAFREQN CELL(Optional)

Neighboring cell oriented Cell Individual Offset (CIO). This parameter defines the neighboring cell oriented cell individual offset. The set value functions in combination of Interval the cell oriented Type CIO. Their sum is added to the measurement quantity before the UE evaluated whether an event has occurred. In handover algorithms, this parameter is used for moving the border of a cell.

-20~20

-10~10

CIR

Bandwidth

This parameter ADD specifies the IPLOGICPORT number of a (Mandatory) logical port.

Interval Type

1~1000

64~64000 step:64

CLKTYPE

Clock board type

This parameter SET specifies the type GCUa, CLKTYPE(Ma Enumeratio of the clock GCGa ndatory) n Type board.

GCUa,GCG a

8/7/2013

华为机密,未经许可不得扩散

第141页,共3267页

162734118.xls.ms_office1
Indicating whether the ADD Closed loop time CELLSETUP(O adjust mode in ptional) the cell is supported. This parameter specifies the startup direction of compressed mode that the NodeB supports. - UL_ONLY: The NodeB supports activation of compressed mode only in the uplink. ADD - DL_ONLY: The NODEBLMTP NodeB supports ARA(Optional) activation of compressed mode only in the downlink. - UL_DL_BOTH: The NodeB supports activation of compressed mode in both uplink and downlink.

文档密级:

Closed loop time adjust CLTAModeI mode nd indication

TRUE, Enumeratio FALSE n Type

TRUE, FALSE

CmCap

Compression mode capability

Bit Field Type

UL_ONLY, DL_ONLY, UL_DL_B OTH

UL_ONLY, DL_ONLY, UL_DL_B OTH

8/7/2013

华为机密,未经许可不得扩散

第142页,共3267页

162734118.xls.ms_office1
CM type of the cell. WALKING WALKING WALKING_SPE _SPEED_A _SPEED_A ED_AND_HOT_ ND_HOT_ ND_HOT_ SPOT_CELL,MI SPOT_CEL SPOT_CEL D_SPEED_AND L, L,MID_SPE _HOT_SPOT_CE MID_SPEE ED_AND_ LL,HIGH_SPEE D_AND_H HOT_SPOT D_AND_HOT_S OT_SPOT_ _CELL,HIG POT_CELL,LO CELL, H_SPEED_ W_SPEED_AND HIGH_SPE AND_HOT _MEDIUM_COV ED_AND_ _SPOT_CE ERAGE_CELL,H HOT_SPOT LL,LOW_S ADD IGH_SPEED_AN _CELL, PEED_AN CELLCMCF(O D_MEDIUM_CO LOW_SPE D_MEDIU ptional) VERAGE_CELL, ED_AND_ M_COVER Enumeratio SET LOW_SPEED_A MEDIUM_ AGE_CEL n Type CMCF(Optional ND_HIGH_COV COVERAG L,HIGH_SP ) ERAGE_CELL,H E_CELL, EED_AND IGH_SPEED_AN HIGH_SPE _MEDIUM D_HIGH_COVE ED_AND_ _COVERA RAGE_CELL,PI MEDIUM_ GE_CELL, CO_NODEB_TY COVERAG LOW_SPE PE_COVERAGE E_CELL, ED_AND_ _CELL,OTHER_ LOW_SPE HIGH_CO CELL ED_AND_ VERAGE_ The CMCF HIGH_CO CELL,HIG parameters are VERAGE_ H_SPEED_ configured on the CELL, AND_HIG basis of the CM HIGH_SPE H_COVER type of the cell. ED_AND_ AGE_CEL After that, the cell HIGH_CO L,PICO_N

文档密级:

CmcfCellTyp CM cell type e

8/7/2013

华为机密,未经许可不得扩散

第143页,共3267页

162734118.xls.ms_office1
CMCF algorithm switch. 1) CMCF_DL_HLS _SWITCH: When the switch is on, the compressed mode supports DL higher-layer scheduling. 2) CMCF_UL_HLS _SWITCH: When the switch is on, SET the compressed CMCF CORRMALGO mode supports CmcfSwitch algorithm SWITCH(Optio UL higher-layer switch nal) scheduling. 3) CMCF_UL_PRE CFG_TOLERAN CE_SWITCH: When the switch is on, the compressed mode of the UE in the compressed mode pre-configuration state can be different from that required by current traffic. A timer to SRNC wait for the response to SET common transport CMCH RSRC CmchRsrcRs STATETIMER( channel resources response timer pTmr Optional) request in the Iur common transport channel procedure.

文档密级:

Bit Field Type

CMCF_DL _HLS_SWI TCH, CMCF_UL _HLS_SWI TCH, CMCF_UL _PRECFG_ TOLERAN CE_SWITC H, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH

CMCF_DL _HLS_SWI TCH, CMCF_UL _HLS_SWI TCH, CMCF_UL _PRECFG_ TOLERAN CE_SWITC H, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH

Interval Type

1~10000

1~10000

8/7/2013

华为机密,未经许可不得扩散

第144页,共3267页

162734118.xls.ms_office1
Compatibility switch. 1) CMP_IU_IMS_P ROC_AS_NOR MAL_PS_SWIT CH: When the switch is on, the IMS signaling assigned by the CN undergoes compatibility processing as an ordinary PS SET service. When the Compatibility CORRMALGO switch is not on, Bit Field CmpSwitch switch SWITCH(Optio no special Type nal) processing is performed. 2) CMP_IU_SYSH OIN_CMP_IUUP _FIXTO1_SWIT CH: When the switch is on, the IUUP version can be rolled back to R99 when complete configurations are applied during inter-RAT ADD CNDOMAIN( Mandatory) ADD CELLRLPWR( Mandatory) ADD TYPRABBASI Identifying the CNDomainId CN domain ID C(Mandatory) Enumeratio type of a CN. n Type ADD CNNODE(Man datory) RST IURESOURCE( Mandatory) RST IU(Mandatory)

文档密级:

CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL _SWITCH, CMP_IUR_ SHO_DIVC TRL_SWIT CH, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH , CMP_UU_I GNORE_U

CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL _SWITCH, CMP_IUR_ SHO_DIVC TRL_SWIT CH, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH , CMP_UU_I GNORE_U

CS_DOMA CS_DOMA IN, IN,PS_DO PS_DOMAI MAIN N

8/7/2013

华为机密,未经许可不得扩散

第145页,共3267页

162734118.xls.ms_office1
ADD CNNODE(Man datory) SET IUTIMERAND NUM(Mandator y) ADD NRIGLBCNID Identifying a CN Interval MAP(Mandator node. Type y) ADD IMSIIDNNSCN IDMAP(Mandat ory) RST IU(Mandatory) RST IURESOURCE(

文档密级:

CNId

CN node ID

0~4095

0~4095

Status of CN CNLoadStatu Node s

NORMAL, ADD NORMAL, The status of the OFFLOAD, CNNODE(Man Enumeratio OFFLOAD, CN node. INHIBITE datory) n Type INHIBITE D D Mode of resource management. When the interface type is Iub, the value of this parameter ADD SHARE, SHARE, could be SHARE ADJMAP(Man or EXCLUSIVE Enumeratio EXCLUSIV EXCLUSIV datory) E E mode. When the n Type interface type is Iur,Iucs,Iups, the RNC supports only EXCLUSIVE mode. This parameter ACT specifies the LICENSE(Opti index of an onal) operator.

Resource CNMNGMO Management DE Mode

Cn Operator CNOPERAT Index ORINDEX

Interval Type

0~3

0 to 3

Cn Operator CnOperatorN Name ame

ADD Uniquely CNOPERATO identifying Cn R(Mandatory) operator name.

String Type -

1~31 characters

8/7/2013

华为机密,未经许可不得扩散

第146页,共3267页

162734118.xls.ms_office1

文档密级:

Cn Operator CnOpGrpInde Group Index x

ADD Identify a CNOPERGRO Operator Group. UP(Mandatory)

Interval Type

0~31

0~31

CN Operator CnOpGrpInde Group Index x

ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory) ADD QUICKCELLS ETUP(Mandato ry) ADD CELLSETUP( Mandatory)

This parameter specifies the index of the operator group that serves the cell.

Interval Type

0~31

0~31

Cn Operator CnOpGrpNa Group Name me

ADD Uniquely CNOPERGRO identifying Cn UP(Mandatory) operator name.

String Type -

1~31 characters

CnOpIndex

Cn Operator Index

ADD Indicating a Cn NRNCURA(Ma Operator. ndatory)

Interval Type

0~3,5~31

0~3,5~31

8/7/2013

华为机密,未经许可不得扩散

第147页,共3267页

162734118.xls.ms_office1
ADD CNOPERATO R(Mandatory) ADD RSCGRP(Mand atory) ADD ADJMAP(Man datory) ADD IPLOGICPORT (Mandatory) ADD ATMLOGICPO RT(Optional) ADD Cn Operator CZ(Mandatory) index. RST IU(Mandatory) RST IURESOURCE( Mandatory) ADD CELLCBSSAC( Mandatory) SET IUTIMERAND NUM(Mandator y) ADD CNNODE(Man datory) ADD Cn Operator 1 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 2 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 3 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 4 CNOPERGRO index. UP(Mandatory)

文档密级:

CnOpIndex

Cn Operator Index

Interval Type

0~3

0~3

CnOpIndex1

Operator 1 Index

Interval Type

0~3,5~31

0~3,5~31

CnOpIndex2

Operator 2 Index

Interval Type

0~3,5~31

0~3,5~31

CnOpIndex3

Operator 3 Index

Interval Type

0~3,5~31

0~3,5~31

CnOpIndex4

Operator 4 Index

Interval Type

0~3,5~31

0~3,5~31

ADD Common Common CnOpIndexC CNOPERGRO Operator Index Operator Index. omm UP(Optional)

Interval Type

5~31,255

5~31,255

8/7/2013

华为机密,未经许可不得扩散

第148页,共3267页

162734118.xls.ms_office1
Identify operator ONE(One), number in TWO(Two), ADD operator group THREE(Thr CNOPERGRO which is not Enumeratio 1,2,3,4 ee), UP(Mandatory) belong to the n Type FOUR(Four common operator ) number.

文档密级:

CnOpNum

Operator Number

CNProtclVer

CN protocol version

ADD CN protocol CNNODE(Man version. datory)

R99, R4, Enumeratio R99,R4,R5, R5, R6, R7 n Type R6,R7

Code Adjust CodeAdjForH Switch for sdpaSwitch HSDPA

To enlarge the throughout of HSDPA when the NodeB automatic code Code reshuffle algorithem switch based on is enabled, H. If the switch is it's enabled, code recommend occupied by the ed that the R99 service is sharing adjusted toward codes ADD codes with small OFF(OFF), adjacent to CELLHSDPA( numbers. When Enumeratio ON(ON) HSDPA Optional) [Allocate Code n Type code to be Mode] is set to free as Automatic, code possible as can be used by it can, when HSDPA increases the [Code and HSDPA Adjust throughput is switch for improved. Hsdpa] is set to ON,the RNC will select R99 UE to do code adjusting

8/7/2013

华为机密,未经许可不得扩散

第149页,共3267页

162734118.xls.ms_office1

文档密级:

H-based code tree reshuffle user number threshold. When the switch is enabled, if the number of users on the tree to be reshuffled is no greater than this User Number parameter, the ADD CodeAdjForH for Code reshuffle is Interval CELLHSDPA( sdpaUserNum Adjust for allowed. Type Optional) Thd HSDPA Otherwise, the reshuffle is given up. This parameter limits the number of users involved in one reshuffle so that reshuffle on lots of users at a time is avoided.

1~16

1~16

This parameter specifies one of the triggering conditions of code balancing DRD. (The other SET Code occupied condition is the DRD(Optional) CodeBalancin rate threshold minimum Interval ADD gDrdCodeRat for code spreading factor.) Type CELLDRD(Opt eThd balance drd This condition ional) refers to that the code occupancy in the best cell is not lower than the value of this parameter.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第150页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies one of the triggering conditions of code balancing DRD. (The other SET SF4, SF8, Minimum SF condition is the DRD(Optional) SF16, SF32, CodeBalancin threshold for code occupancy.) ADD Enumeratio SF64, gDrdMinSFT code balance This condition CELLDRD(Opt n Type SF128, hd drd refers to that the ional) SF256 minimum spreading factor of the best cell is not smaller than the value of this parameter.

SF4, SF8, SF16, SF32, SF64, SF128, SF256

8/7/2013

华为机密,未经许可不得扩散

第151页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies whether the code balancing DRD algorithm will be SET applied. DRD(Optional) Code balance - ON: The code CodeBalancin ADD Enumeratio ON, OFF drd switch balancing DRD gDrdSwitch CELLDRD(Opt n Type algorithm will be ional) applied. - OFF: The code balancing DRD algorithm will not be applied.

ON, OFF

8/7/2013

华为机密,未经许可不得扩散

第152页,共3267页

162734118.xls.ms_office1
This switch is valid only when the interfrequency handover switch is enabled. TRUE means that interfrequency handover is selected in code resource congestion. FALSE means that interCode frequency ADD FALSE(FA CodeCongSel congestion handover is not FALSE, CELLLDR(Opti Enumeratio LSE), InterFreqHoIn select interselected in code TRUE onal) n Type TRUE(TRU d freq indication resource E) congestion. This parameter should be set based on network resource usage. In the case of multifrequency coverage, if code resources present a bottleneck, such as indoor environment, the parameter is recommended to

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第153页,共3267页

162734118.xls.ms_office1

文档密级:

SET The message CodeScheme Code Scheme RNCCBPARA( code scheme. Optional)

GERMAN( German), ENGLISH( English), ITALIAN(It alian), FRENCH(F rench), SPANISH( Spanish), DUTCH(Du tch), SWEDISH( Swedish), DANISH(D Enumeratio anish), n Type PORTUGU ESE(Portug uese), FINNISH(F innish), NORWEGI AN(Norweg ian), GREEK(Gr eek), TURKISH( Turkish), HUNGARI AN(Hungar ian),

GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGU ESE, FINNISH, NORWEGI AN, GREEK, TURKISH, HUNGARI AN, POLISH, LANGUAG EUNSPECI FIED

8/7/2013

华为机密,未经许可不得扩散

第154页,共3267页

162734118.xls.ms_office1
Type of event 2D/2F measurement thresholds when inter-frequency and inter-RAT measurements coexist. COEXIST_MEA S_THD_CHOIC E_INTERFREQ: choosing the interfrequency InterFreq and ADD oriented InterRat CELLHOCOM parameters as coexist M(Optional) event 2D/2F CoexistMeas Enumeratio measure SET measurement ThdChoice n Type threshold HOCOMM(Opt thresholds for choice ional) inter-frequency measurement. COEXIST_MEA S_THD_CHOIC E_INTERRAT: choosing the interRAT oriented parameters as event 2D/2F measurement thresholds for inter-RAT measurement. When you set the For a PTM service, if the ratio of the intrafrequency cells where the service is transmitted in PTM mode to the intra-frequency cells of a cell reaches the Combine SET Interval percentage CombNCellP Neighbour Cell RNCMBMSPA specified by this Type ercent Percent RA(Optional) parameter, the cell has gains in combining. Then, the power of the FACH carrying the service in the cell decreases by [PARA]SoftCom bPwrOffset[/PAR A].

文档密级:

COEXIST_ MEAS_TH D_CHOICE _INTERFR EQ(Choosin g the interfrequency oriented parameters), COEXIST_ MEAS_TH D_CHOICE _INTERRA T(Choosing the interRAT oriented parameters)

COEXIST_ MEAS_TH D_CHOICE _INTERFR EQ,COEXI ST_MEAS_ THD_CHOI CE_INTER RAT

0~100

0~1,step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第155页,共3267页

162734118.xls.ms_office1

文档密级:

The ralative power margin of combined traffics, used to calculate ADD the triggering CELLDCCC(O Comb Event F threshold of event ptional) Interval CombPwrMar Reporting F, can avoid the SET Type gin Power Margin fluctuation of DCCC(Optional traffic rate in case ) the power becomes restricted after rate is increased.

0~100

0~10, step: 0.1

Comm Plmn CommPlmnU Using Type singType

NONThis parameter SUPPORTI determines NG_UE_O SET whether Common NLY(NonOPERATORSH PLMN ID is used Supporting Enumeratio ARINGMODE( when the RNC UE Only), n Type Optional) sends the INIT BOTH(Both UE MESSAGE to ), the CN. NEITHER( Neither)

NONSUPPORTI NG_UE_O NLY,BOT H,NEITHE R

COMTMR1

Timer T1

Timer T1.Interval ADD between failure of Interval SAALLNK(Opt initial alignment Type ional) and origination of next initial alignment.

1~7

1~7

COMTMR2

Timer T2

Timer T2.Total ADD time SSCF will SAALLNK(Opt attempt ional) alignment.

Interval Type

30~90

30~90

COMTMR3

Timer T3

ADD Timer T3.Time SAALLNK(Opt between proving ional) PDUs.

Interval Type

10~200

10~200

8/7/2013

华为机密,未经许可不得扩散

第156页,共3267页

162734118.xls.ms_office1

文档密级:

Recover CONGCLRT threshold of HD0 queue 0

The port flow control is disabled when the buffer duration of queue 0 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the CBR queue.

10~150

10 to 150

Recover CONGCLRT threshold of HD1 queue 1

The port flow control is disabled when the buffer duration of queue 1 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the CBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第157页,共3267页

162734118.xls.ms_office1

文档密级:

Recover CONGCLRT threshold of HD2 queue 2

The port flow control is disabled when the buffer duration of queue 2 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the NRTVBR queue.

10~150

10 to 150

Recover CONGCLRT threshold of HD3 queue 3

The port flow control is disabled when the buffer duration of queue 3 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the UBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第158页,共3267页

162734118.xls.ms_office1

文档密级:

Recover CONGCLRT threshold of HD4 queue 4

The port flow control is disabled when the buffer duration of queue 4 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the UBR+ queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第159页,共3267页

162734118.xls.ms_office1

文档密级:

Recover CONGCLRT threshold of HD5 queue 5

The port flow control is disabled ADD when the buffer PORTFLOWC duration of queue Interval TRLPARA(Opt 5 is smaller than Type ional) or equal to the value of this parameter.

10~150

10 to 150

Congestion CONGTHD0 threshold of queue 0

The port flow control is enabled when the buffer duration of queue 0 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the CBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第160页,共3267页

162734118.xls.ms_office1

文档密级:

Congestion CONGTHD1 threshold of queue 1

The port flow control is enabled when the buffer duration of queue 1 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the RTVBR queue.

10~150

10 to 150

Congestion CONGTHD2 threshold of queue 2

The port flow control is enabled when the buffer duration of queue 2 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the NRTVBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第161页,共3267页

162734118.xls.ms_office1

文档密级:

Congestion CONGTHD3 threshold of queue 3

The port flow control is enabled when the buffer duration of queue 3 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the UBR queue.

10~150

10 to 150

Congestion CONGTHD4 threshold of queue 4

The port flow control is enabled when the buffer duration of queue 4 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the UBR+ queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第162页,共3267页

162734118.xls.ms_office1

文档密级:

Congestion CONGTHD5 threshold of queue 5

The port flow control is enabled ADD when the buffer PORTFLOWC Interval duration of queue TRLPARA(Opt Type 5 is larger than or ional) equal to the value of this parameter.

10~150

10 to 150

Cell barred ConnCellBarr indicator for ed SIB4

Indicating whether the UE in connected mode is allowed to access the cell. When the cell status is BARRED, it ADD indicates that the BARRED, BARRED, CELLACCESS UEs in connected Enumeratio NOT_BAR NOT_BAR STRICT(Manda mode are barred n Type RED RED tory) to select/reselect the cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331.

8/7/2013

华为机密,未经许可不得扩散

第163页,共3267页

162734118.xls.ms_office1
This parameter specifies the RRC redirection strategy. - OFF: RRC redirection is not allowed. Only_To_Inter_F requency: Only RRC redirect SET RRC redirection switch DRD(Optional) to inter-frequency cells is allowed. Allowed_To_Inte r_RAT: RRC redirection to inter-frequency cells and redirection to inter-RAT cells are both allowed. Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB4] is BARRED. If this parameter is ALLOWED, the ADD UE in connected Intra-freq cell CELLACCESS mode can select reselection ind STRICT(Option another intrafor SIB4 al) frequency cell when the cell selection/reselecti on condition is satisfied. If this parameter is NOT_ALLOWE D, the UE in idle mod cannot select another intrafrequency cell. The indicator can be neglected in case of emergency calls.

文档密级:

ConnectFailR rcRedirSwitch

OFF, Only_To_In ter_Frequen Enumeratio cy, n Type Allowed_To _Inter_RAT

OFF, Only_To_In ter_Frequen cy, Allowed_To _Inter_RAT

ConnIntraFre qReselection

ALLOWED Enumeratio , n Type NOT_ALL OWED

ALLOWED , NOT_ALL OWED

8/7/2013

华为机密,未经许可不得扩散

第164页,共3267页

162734118.xls.ms_office1
This parameter ADD specifies whether Is connecting CONNPWR SUBRACK(Opt the added RBS is power monitor ional) connected to the WDMB. The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The Hysteresis 1 ADD greater the slow ConnQhyst1s for connect CELLSELRES fading variance mode EL(Optional) is, the greater this parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the ping-

文档密级:

Enumeratio YES, NO n Type

YES,NO

Interval Type

0~20

0~40, step:2

8/7/2013

华为机密,未经许可不得扩散

第165页,共3267页

162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The ADD greater the slow Interval CELLSELRES fading variance Type EL(Optional) is, the greater this parameter. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value.

文档密级:

Hysteresis 2 ConnQhyst2s for connect mode

0~20,255

{0~40},{25 5}, step:2

8/7/2013

华为机密,未经许可不得扩散

第166页,共3267页

162734118.xls.ms_office1
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset Interval corresponding to Type CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12

文档密级:

ADD INTERFREQN CELL(Optional) ConnQoffset1 ConnQoffset1s ADD sn n INTRAFREQN CELL(Optional)

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第167页,共3267页

162734118.xls.ms_office1
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset Interval corresponding to Type CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12

文档密级:

ADD INTERFREQN CELL(Optional) ConnQoffset2 ConnQoffset2s ADD sn n INTRAFREQN CELL(Optional)

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第168页,共3267页

162734118.xls.ms_office1
Threshold for inter-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection Inter-freq cell procedure will be ADD reselection started. This Interval ConnSinterse CELLSELRES threshold for parameter is not Type arch EL(Optional) connect mode configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher

文档密级:

{-16~10,127 32~20},{12 7}, step:2

8/7/2013

华为机密,未经许可不得扩散

第169页,共3267页

162734118.xls.ms_office1
Threshold for intra-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell Intra-freq cell reselection ADD reselection procedure will be Interval ConnSintrase CELLSELRES threshold for started. This Type arch EL(Optional) connect mode parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold

文档密级:

{-16~10,127 32~20},{12 7}, step:2

8/7/2013

华为机密,未经许可不得扩散

第170页,共3267页

162734118.xls.ms_office1
This parameter is valid when [Cell barred indicator for SIB4] is BARRED. It D10(10 indicates that the seconds), delay of the cell D20(20 can be measured seconds), next time when D40(40 [Cell barred seconds), indicator for ADD D80(80 10, 20, 40, SIB4] is set to CELLACCESS seconds), 80, 160, BARRED. The Enumeratio STRICT(Option D160(160 320, 640, time barred can n Type al) seconds), 1280 be increased or D320(320 reduced in seconds), network planning D640(640 based on the seconds), actual time the D1280(128 cell is barred. For 0 seconds) detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

ConnTbarred

Time barred for SIB4

8/7/2013

华为机密,未经许可不得扩散

第171页,共3267页

162734118.xls.ms_office1
It is used to calculate the transmit power of the first preamble in the random access process. The formula is as follows: Preamble_Initial_ Power = Primary CPICH DL TX powerCPICH_RSCP + UL interference + Constant value Constant Value. ADD for calculating Where, Interval PRACHBASIC( Constantvalue initial TX Preamble_Initial_ Type Optional) power Power is the preamble initial TX power, Primary CPICH DL TX power is the downlink transmit (TX) power of PCPICH, CPICH_RSCP is the receive signaling code power of the PCPICH measured by UEs,

文档密级:

-35~-10

-35~-10

8/7/2013

华为机密,未经许可不得扩散

第172页,共3267页

162734118.xls.ms_office1

文档密级:

CONTEXTT YPE

RST Context type of Context Type IUR(Mandatory the Iur interface ) to be reset.

Context, Context_Gr Enumeratio oup, n Type All_Context s

Context,Co ntext_Group ,All_Contex ts

CONTPING

Continue ping PING or not IP(Optional)

This parameter specifies whether to run the ping Enumeratio NO, YES command n Type consecutively.

NO,YES

Downlink maximum bit ConverDlMB rate of R Conversation

This parameter D0, D8, specifies the DL SET D16, D32, maximum bit rate USERMBR(Opt Enumeratio D64, D128, of conversation ional) n Type D144, for PS domain D256, D384 user. This parameter D0, D8, specifies the UL SET D16, D32, maximum bit rate USERMBR(Opt Enumeratio D64, D128, of conversation ional) n Type D144, for PS domain D256, D384 user.

D0, D8, D16, D32, D64, D128, D144, D256, D384

Uplink maximum bit ConverUlMB rate of R Conversation

D0, D8, D16, D32, D64, D128, D144, D256, D384

8/7/2013

华为机密,未经许可不得扩散

第173页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Conversational CONVGBR CELLEFACH( CELL_FACH MAC-c flow Optional) state, this GBR parameter determines the guaranteed speed of the MAC-c flow that sends conversational service data on the Iub interface. The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Conversational CONVMBR CELLEFACH( CELL_FACH MAC-c flow Optional) state, this MBR parameter determines the maximum speed of the MAC-c flow that sends conversational service data on the Iub interface.

文档密级:

Interval Type

1~1000

1~1000

Interval Type

1~2000

1~2000

8/7/2013

华为机密,未经许可不得扩散

第174页,共3267页

162734118.xls.ms_office1

文档密级:

WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ CopperMaxM AMR speech Enumeratio AMRC For SET BITRATE_ ode service for copper n Type Copper Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K

6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85

8/7/2013

华为机密,未经许可不得扩散

第175页,共3267页

162734118.xls.ms_office1

文档密级:

NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) CopperMaxM AMR speech Enumeratio 70K, AMRC For SET ode service for copper n Type NBAMR_B Copper Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K This parameter PING specifies the MAC(Optional) number of sent packets.

4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20

COUNT

Send PKT Count

Interval Type

1~28

1 to 28

8/7/2013

华为机密,未经许可不得扩散

第176页,共3267页

162734118.xls.ms_office1

文档密级:

Count-C CountCThres threshold hold

SET Count-C CNTCHK(Man checking values. datory)

Interval Type

1024~4294 1024~4294 967295 967295

SET Counter check Counter check CounterChec CNTCHK(Opti switch switch. kSwitch onal)

Enumeratio ON, OFF n Type

ON,OFF

CP1SupInd

CP1 support indicator

ADD CELLSETUP(O ptional) ADD NRNCCELL(O ptional)

This parameter indicates whether CP1_Suppo CP1_Suppo the closed loop Enumeratio rted, rted, TX diversity n Type CP1_not_S CP1_not_S mode 1 upported upported supported.

8/7/2013

华为机密,未经许可不得扩散

第177页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of subframes transmitted when the priority of reporting CQI is higher than the SET CQI Activity priority of CqiDtxTimer DTXDRXPAR Timer transmitting A(Optional) patterns on the UL DPCCH in DTX mode after one HS-DSCH reception. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the CQI feedback cycle in DTX-DRX mode. Currently, the value of this CQI Feedback SET CQIFbCkinIn parameter can be Cycke in DTX- DTXDRXPAR DTXDRXmo set to only D2 DRX mode A(Optional) de because the NodeB supports only D2. For details, refer to the 3GPP TS 25.433 protocol.

文档密级:

D0, D1, D2, D4, D8, D16, D32, Enumeratio D64, D128, n Type D256, D512, INFINITY

0,1,2,4,8,16, 32,64,128,2 56,512,INFI NITY

D0, D2, D4, D8, D10, D20, 0,2,4,8,10,2 Enumeratio D40, D80, 0,40,80,160, n Type D160, D16, 16,32,64 D32, D64

Max number CRMaxNum of cell reselection

Maximum number of cell reselection. This parameter, along with the [Time for ADD evaluating max Interval CELLHCS(Opti cell reselection], Type onal) is used for rate evaluation in HCS. For details, refer to 3GPP TS 25.304.

1~16

1~16

8/7/2013

华为机密,未经许可不得扩散

第178页,共3267页

162734118.xls.ms_office1
This field ADD indicate whether SCTPLNK(Opti the cross IP onal) address is available.

文档密级:

Cross IP CROSSIPFL address AG available flag

UNAVAIL Enumeratio ABLE, n Type AVAILAB LE

UNAVAIL ABLE, AVAILAB LE

R99 CS R99 CS conversational ADD conversational Interval CSCONVDL service TRMFACTOR( service downlink Type downlink Optional) factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第179页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS ADD R99 CS CSCONVPRI conversational TRMMAP(Opti conversational PATH primary path onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

R99 CS R99 CS ADD conversational conversational CSCONVPRI LOADEQ(Opti bearing primary pri path load TH onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第180页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS ADD R99 CS CSCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

R99 CS R99 CS conversational conversational ADD primary CSCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第181页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS R99 CS ADD conversational conversational CSCONVUL TRMFACTOR( service uplink service uplink Optional) factor factor.

Interval Type

0~100

0~100

CsErlang

This parameter ACT Max User specifies LICENSE(Opti Number of CS maximum CS onal) services.

Interval Type

0~61200

0 to 61200

8/7/2013

华为机密,未经许可不得扩散

第182页,共3267页

162734118.xls.ms_office1
CS domain Relocation GSM load THD. This parameter specifies the CS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldI ADD nd] in SET CELLINTERR INTERRATHON ATHONCOV( COV is set to Optional) ON, the CS Interval SET domain interType INTERRATHO system relocation NCOV(Optional out process will ) be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the CS domain Reloc GSM load THD. Otherwise, the RNC does not stop the CS domain intersystem relocation out process.

文档密级:

CS domain CSHOOut2Gl Reloc GSM oadThd load THD

0~100

0~100%

8/7/2013

华为机密,未经许可不得扩散

第183页,共3267页

162734118.xls.ms_office1

文档密级:

SET CS OPERATORCF CsInfoUpdFla Information GPARA(Option g Update Switch al)

Indicating whether the CS domain permits the CN information to update .

Enumeratio OFF, ON n Type

OFF, ON

CsInfoUpdT mr

CS Information Update Protection Timer

SET Cs Information OPERATORCF Interval Update protection GPARA(Manda Type timer. tory)

60~900

60~900

8/7/2013

华为机密,未经许可不得扩散

第184页,共3267页

162734118.xls.ms_office1

文档密级:

Feature Supporting CsNriCfgMo Mode of CS de Domain

This parameter specifies feature SUPP_NO mode of operators NE, SUPP_NO in the CS domain. SET SUPP_IUF NE,SUPP_I You should OPERATORCF LEX, UFLEX,SU configure the Enumeratio GPARA(Option SUPP_MO PP_MOCN, network resource n Type al) CN, SUPP_IUF identifier (NRI) SUPP_IUF LEX_MOC when MOCN or LEX_MOC N Iu-Flex is N supported.

8/7/2013

华为机密,未经许可不得扩散

第185页,共3267页

162734118.xls.ms_office1

文档密级:

SET Length of CS OPERATORCF NRI length for CSNRILengt NRI in bits GPARA(Manda CS domain. h tory)

Interval Type

1~10

1~10

SET DSACAUTOA LGO(Mandator Restriction for y) CsRestriction CS ADD CELLDSACM ANUALPARA( Mandatory)

Whether to impose the access FALSE, Enumeratio restriction on the TRUE n Type CS domain.

FALSE,TR UE

8/7/2013

华为机密,未经许可不得扩散

第186页,共3267页

162734118.xls.ms_office1
Indicating whether the cell allows CS service inter-RAT handover. ON: CS service inter-RAT handover is enabled. OFF: CS service inter-RAT handover is disabled. Service handover refers to the Inter-RAT CS ADD handover attribute CSServiceHO handover CELLHOCOM Enumeratio ON, OFF and related Switch switch M(Optional) n Type parameter configuration on the network side for each service. When a service is established, the related measurements and inter-RAT handover are immediately triggered. These two switches are enabled only for service handover;

文档密级:

ON,OFF

8/7/2013

华为机密,未经许可不得扩散

第187页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS streaming CSSTRMDL service downlink factor

ADD R99 CS Interval TRMFACTOR( streaming service Type Optional) downlink factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第188页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS CSSTRMPRI streaming PATH primary path

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD R99 CS AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

R99 CS streaming pri CSSTRMPRI path load TH threshold

R99 CS ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第189页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS ADD R99 CS CSSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

R99 CS R99 CS ADD streaming primary streaming pri Interval CSSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第190页,共3267页

162734118.xls.ms_office1

文档密级:

R99 CS ADD R99 CS streaming Interval CSSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第191页,共3267页

162734118.xls.ms_office1
CS algorithm switch. 1) CS_AMRC_SWI TCH: When the switch is on and the AMRC license is activated, the AMR control function is enabled for AMR services. 2) CS_HANDOVE R_TO_UTRAN_ DEFAULT_CFG _SWITCH: When the switch is on, the default configurations of signaling and RABs, which are stipulated in 3GPP 25.331, are used for relocation of the UE from GSM to WCDMA. When the switch is not on, the default configurations are Indicating the channel type of CS speech service. -DCH: Both uplink and downlink are beared on DCH. -HSPA:Uplink is beared on EDCH, downlink beared on HS-

文档密级:

CsSwitch

SET CS algorithm CORRMALGO switch SWITCH(Optio nal)

Bit Field Type

CS_AMRC _SWITCH, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH, CS_IUUP_ V2_SUPPO RT_SWITC H, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH

CS_AMRC _SWITCH, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH, CS_IUUP_ V2_SUPPO RT_SWITC H, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH

CS voice CSVoiceChlT channel type ype

SET FRCCHLTYPE PARA(Optional )

DCH(UL_D CH,DL_DC Enumeratio H), DCH,HSPA n Type HSPA(UL_ EDCH,DL_ HSDSCH)

8/7/2013

华为机密,未经许可不得扩散

第192页,共3267页

162734118.xls.ms_office1
This parameter specifies the relative delay for jitter correction of the CS traffic over the downlink CS Voice HSPA channel. SET CSVoiceHspa Hspa Dl This parameter FRC(Optional) DlRelDelay Relative Delay indicates the maximum CS delay for the traffic transmitted to the UE. For details, see 3GPP TS 25.331. This parameter specifies the relative delay for jitter correction of the CS traffic over the uplink HSPA channel. The CS data is buffered on the CS Voice PDCP layer and SET CSVoiceHspa Hspa Ul then sent to the FRC(Optional) UlRelDelay Relative Delay higher layer in packets after CFN plus CSVoiceHspaUl RelDelay. In this way, the CS data can be transmitted over the HSPA channel at regular intervals.

文档密级:

Interval Type

-100~100

-100~100

Interval Type

-100~100

-100~100

HSUPA TTI CSVoiceHsup type of CS aTti voice traffic

This parameter specifies the TTI EDCH_TTI EDCH_TTI SET type used for CS Enumeratio _10ms, _10ms, FRC(Optional) services over the n Type EDCH_TTI EDCH_TTI uplink HSPA _2ms _2ms channel. Indicating whether to ADD support CS over NRNC(Optional HSPA of the ) neighboring RNC.

CS Voice Over Hspa CSVoiceOver Support HspaSuppInd Indication

Enumeratio OFF, ON n Type

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第193页,共3267页

162734118.xls.ms_office1
Uniquely identifying a TFC on the SCCPCH. The specific parameter value depends on the ADD CTFC Size (2 SCCPCHTFC( bits: 0~3, 4 bits: Mandatory) Interval 0~15, 6 bits: ADD Type 0~63, 8 bits: PRACHTFC(M 0~255, 12 bits: andatory) 0~4095, 16 bits: 0~65535, 24 bits: 0~16777215). For detailed information of this parameter, refer to 3GPP TS

文档密级:

CTFC

Calculated transport format combination

0~1677721 0~1677721 5 5

CTFCSize

CTFC length of TFCS

Calculated TFC (CTFC) length of the Transport Format Combination Set (TFCS) on the SCCPCH. This ADD parameter value is BIT2, SCCPCHBASI related to the BIT4, BIT6, C(Optional) maximum number BIT8, 2, 4, 6, 8, Enumeratio ADD of Transport BIT12, 12, 16, 24 n Type PRACHBASIC( Format BIT16, Optional) Combinations BIT24 (TFCs) on the transport channel. For detailed information of this parameter, refer to 3GPP TS 25.433.

The sharing offset should be added to the target subrack or SET subsystem. This Control plane CTRLPLNSHA parameter is used Interval CtrlPlnSharin sharing out REPARA(Optio for preferable Type gOutOffset offset nal) selection of the homing subrack and homing subsystem during call forwarding.

1~10

0.01~0.1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第194页,共3267页

162734118.xls.ms_office1
Forwarding threshold of control plane load sharing. When the CPU usage is between the sharing threshold SET and overload Control plane CTRLPLNSHA threshold, and Interval CtrlPlnSharin sharing out REPARA(Optio call number in Type gOutThd threshold nal) each second reaches [SharingOutCAP SMidLoad], new arrival call attempts will be shared out to other SPU. CTRLSLOT Slot No. ADD Number of the RSCGRP(Mand MPU slot. atory) Interval Type

文档密级:

0~100

0~1, step:0.01

0,2,4,8,10

0, 2, 4, 8, 10

CTRLSW

CM control enable switch

SET CMCTRLSW( Mandatory)

This parameter specifies whether to support the Enumeratio ON, OFF configuration n Type rollback function.

ON,OFF

CXT

Cross type

CZ

Classified Zone ID

This parameter ADD specifies the type VPCLCX(Mand of VPL/VCL atory) cross connection. Uniquely identifying a classified zone. ADD The value of CZ(Mandatory) Classified Zone ID is denoted by decimal numerals.

VPLCX, Enumeratio VCLCX n Type

VPLCX, VCLCX

Interval Type

0~4799

0~4799

8/7/2013

华为机密,未经许可不得扩散

第195页,共3267页

162734118.xls.ms_office1
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH channel, the low activity counter increases by 1 every time BE D2F/R Or SET traffic volume D2F2PTvmT F/R2P 4B UESTATETRA event 4B is hd Threshold NS(Optional) reported. If the UE is on FACH channel, the low activity counter increases by 1 if the traffic volume is 0 in the traffic volume event 4B report. Pending time after the traffic volume event 4B SET is reported. This BE D2F/R 4B D2FTvmPTA UESTATETRA parameter is used Pending Time T NS(Optional) to prevent too many traffic volume events 4B being reported. When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is SET BE D2F/R 4B reported. This D2FTvmTime UESTATETRA Time parameter ToTrig NS(Optional) prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, Enumeratio D24k, n Type D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D250, D500, D1000, Enumeratio D2000, n Type D4000, D8000, D16000

文档密级:

8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

250, 500, 1000, 2000, 4000, 8000, 16000

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第196页,共3267页

162734118.xls.ms_office1

文档密级:

After the 1A measurement report is received, the rate is reduced to the threshold 1A Rate Down SET rate for soft Interval Dccc1APenal Penalty Time DCCC(Optional handover and the Type tyTime Length ) timer specified by this parameter starts. The DL rate cannot be increased before the timer expires. This parameter defines the length of penalty timer for SHO failure after rate reduction in the active set. When the rate reduction in the active set is performed which triggers the increase of SHOs in the target cell, if the target cell SET fails to join the Interval INTRAFREQH active again, the Type O(Optional) RNC starts the penalty timer for SHO failure. This parameter defines the length of the penalty timer. Before the timer expires, the rate increasing in the active set is prohibited, but rate reduction is not prohibited. Such penalty strategy is applied

1~255

1~255

Period of penalty timer DcccShoPena for SHO ltyTime failure after down rate

0~255

0~255

8/7/2013

华为机密,未经许可不得扩散

第197页,共3267页

162734118.xls.ms_office1
Strategy for adjustment of the rate of the PS BE service when the UE is in the CELL_DCH state. RATE_UP_AND _DOWN_ON_D SET CH indicates that DCCC(Optional the rate over the ) DCH can be raised or lowered. RATE_UP_ONL Y indicates that the rate over the DCH can only be raised, which means that the UE can switch to the FACH state at Length of the penalty period within which the rate of a BE service cannot be increased even if the 4A measurement SET report is received. DCCC(Optional Increase of the ) BE service rate is triggered by the 4A measurement report.4A report will not be processed until this Penalty Timer expires. This parameter specifies the period of DCH throughput ratio measurement.Ma cd performs SET statistic of traffic DCCC(Optional volume on DCH ) and reports 4B events which are used for the rate decrease process of BE service set up on DCH.

文档密级:

DcccStg

DCCC Strategy

RATE_UP_ AND_DO WN_ON_D Enumeratio CH, n Type RATE_UP_ ONLY_ON _DCH

RATE_UP_ AND_DO WN_ON_D CH, RATE_UP_ ONLY_ON _DCH

DCCC Rate Up Fail DcccUpPenal Penalty Time tyLen Length

Interval Type

1~65535

1~65535

DCH Throu DchThrouMe Meas Period asPeriod

Interval Type

1~1000

10~10000, step: 10

8/7/2013

华为机密,未经许可不得扩散

第198页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4B related to DCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4B on DCH.

文档密级:

Period Amount after DchThrouPen trigger 4B on dingTime4B DCH

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第199页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the DCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on DCH is triggered. This parameter is set to ADD avoid unnecessary TYPRABDCC reports triggered CMC(Optional) by DCH throughput fluctuation. The larger the value of this parameter, the longer the required duration of the DCH throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughputThis parameter specifies the SET subnet number of SUBNET(Optio the internal nal) debugging IP address of the RNC.

文档密级:

Period Amount to DchThrouTim trigger 4B on etoTrigger4B DCH

Interval Type

0~1023

0~1023

Debugging DEBUGSUB Subnet No. NET

Interval Type

1 to 1~126,128~ 126,128 to 223 223

DefaultCnOp

Default CnOperator

This parameter specifies the default operator SET that RNC chooses OPERATORSH Interval in the MOCN ARINGMODE( Type cell. The value Optional) 255 means that no default operator is defined.

0~3,255

0~3,255

8/7/2013

华为机密,未经许可不得扩散

第200页,共3267页

162734118.xls.ms_office1
This parameter specifies the constant that is used by the RNC to compute the DPCCH_Power_ Offset which is further used by the UE to calculate the UL DPCCH_Initial_P ower during the open-loop power control. The formulas are as Constant value SET follows: Interval DefaultConst configured by FRC(Optional) DPCCH_Power_ Type antValue default Offset = Primary CPICH DL TX power + UL interference + Default Constant Value DPCCH_Initial_P ower = DPCCH_Power_ Offset CPICH_RSCP where DPCCH_Power_ Offset is the DPCCH initial When the RNC is performing downlink open power control, it evaluates link consumption according to the PCPICH TX power and the ADD PCPICH signal Interval CELLCAC(Opti intensity detected Type onal) in UE access. However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this parameter to evaluate link consumption.

文档密级:

-35~-10

-35~-10

Default DefPcpichEc PCPICH No Ec/No

-30~30

-30~30

8/7/2013

华为机密,未经许可不得扩散

第201页,共3267页

162734118.xls.ms_office1
This parameter specifies the delay time. When the RNC recovers SET from disaster and POOLPRIMHO starts to operate, Interval STPOLICY(Ma it performs reType ndatory) host policy for the primary hosted NodeB after the specified delay time.

文档密级:

Delay

Delay Time Length

0~3600

0~3600

DELAY

This parameter specifies the ADD maximum delay Interval Max diff delay IMAGRP(Optio difference Type nal) between different IMA links in an IMA group.

4~255

4 to 100(AEUa), 4 to 255(AOUa)

8/7/2013

华为机密,未经许可不得扩散

第202页,共3267页

162734118.xls.ms_office1

文档密级:

DelayClass

Delay Class

This parameter specifies the delay class. ADD According to the TYPRABOLPC specification, a (Mandatory) maximum of five Interval ADD delay classes, that Type TYPRABRLC( is, class 1 to class Mandatory) 5, are available. The five classes do not overlap each other. This parameter specifies the threshold of code occupancy offset between the current cell and the target cell when code SET balancing DRD is Interval DRD(Optional) applied. Only Type when the cell code occupancy offset reaches this threshold can a neighboring cell be selected to be a candidate cell for DRD.

1~5

1~5

Delta code DeltaCodeOc occupied rate cupiedRate

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第203页,共3267页

162734118.xls.ms_office1

文档密级:

Actual minimum required RX level = minimum ADD required RX level CELLSELRES + extended Delta Min Rx EL(Mandatory) Interval DeltaQrxlevm minimum level ADD Type in required RX NRNCCELL(M level. For details, andatory) refer to the 3GPP TS 25.331 10.3.2.3.

-2~-1

-4~2,step:2

DENO

Destination entity No.

ADD M3DE(Mandato ry) ADD M3RT(Mandato ry) ADD M3LKS(Mandat ory)

M3UA destination entity indexes and Interval M3UA Type destination entity have a one-to-one correspondence.

0~118

0~118

DESTIP

Destination IP PING address IP(Mandatory)

This parameter specifies the destination IP address.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第204页,共3267页

162734118.xls.ms_office1

文档密级:

DESTIP

This parameter TRC Destination IP specifies a IPADDR(Mand address destination IP atory) address.

IP Address Type

0.0.0.0~255 .255.255.25 5

DESTMEPID

RMEP ID

PING This parameter Interval MAC(Mandator specifies the ID Type y) of a remote MEP.

1~100

1 to 100

DESTMEPID

RMEP ID

TRC This parameter Interval MAC(Mandator specifies an MEP Type y) in an MA.

1~100

1 to 100

DGPS data DGPSPERIO report period D

Direction

Direction

This parameter specifies the ADD Interval period of GPS(Optional) Type reporting the DGPS data. This parameter specifies the direction that the traffic volume measurement is applicable to. - DOWNLINK: ADD indicates TYPRABDCC downlink traffic Enumeratio CMC(Mandator n Type volume y) measurement. - UPLINK: indicates uplink traffic volume measurement or EDCH throughput measurement.

1~60

1 to 60

UPLINK, UPLINK, DOWNLIN DOWNLIN K K

8/7/2013

华为机密,未经许可不得扩散

第205页,共3267页

162734118.xls.ms_office1
There are two combination methods for uplink combination of soft handover: one is maximum ratio combination at the NodeB Rake receiver, which gives the MAY(Node highest B chooses combination gain; whether the other is combine at selective SET NodeB), combination at HOCOMM(Opt Enumeratio MUST(Mus the RNC, which ional) n Type t combine at gives a relatively NodeB), smaller MUST_NO combination gain. T(Must The default value combine at of the indication RNC) switch is MAY, which means the NodeB decides whether to implement maximum ratio combination according to its own physical conditions; when

文档密级:

Softer handover DivCtrlField combination indication switch

MAY, MUST, MUST_NO T

DL activity DL AF of R99 SET factor of the R99 Interval DlAmrConvA AMR conv ADMCTRL(Op AMR Type F service tional) conversational service.

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第206页,共3267页

162734118.xls.ms_office1

文档密级:

Duration from when the AMR TX power is beyond the ADD threshold Ea or CELLQUALIT below the AMR Trigger YMEAS(Option threshold Eb to Interval DlAmrTrigTi Time Of Event al) when the event Ea Type meE E SET or Eb is triggered. QUALITYME This parameter is AS(Optional) used to avoid faulty reporting due to instability of power.

1~6000

10~60000, step: 10

DL activity DL AF of R99 SET factor of the R99 Interval DlBackgroun background ADMCTRL(Op background Type dAF service tional) service.

0~100

0~1, step: 0.01

L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the DL basic LDM(Optional) anti-slow-fading DlBasicCom common SET capability, but the mMeasFilter measure filter SATLDM(Opti lower the signal Coeff coeff onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter specifies the DL DL rate of initial access rate SET DlBeH2DIniti HSDPA BE used when FRC(Optional) alRate traffic as H2D HSDPA BE services switch to the DCH.

D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19

D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19

D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第207页,共3267页

162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use DCH to carry DL PS domain background/intera ctive services. If the FRC parameters of the best cell cannot be obtained, this SET default value will FRCCHLTYPE be used. Only DL BE traffic PARA(Optional when the DL DlBeTraffDe DCH decision ) Enumeratio D8, D16 service rate is cThs threshold ADD n Type higher than or CELLFRC(Opti equal to this onal) threshold, and the UL service rate is higher than or equal to the uplink threshold, the service will be set up on DCH. Otherwise, it will be set up on CCH. According to the product specifications, only the

文档密级:

8, 16

8/7/2013

华为机密,未经许可不得扩散

第208页,共3267页

162734118.xls.ms_office1

文档密级:

DL BE traffic Initial bit rate. When DCCC function is D8, D16, enabled, the D32, D64, DL BE traffic SET 8,16,32,64,1 DlBeTraffInit downlink initial Enumeratio D128, Initial bit rate FRC(Optional) 28,144,256, Bitrate bit rate will be set n Type D144, 384 to this value if the D256, D384 downlink max bit rate is higher than the initial bit rate.

This parameter specifies the default rate D8, D16, threshold for D32, D64, decision to use D128, HS-DSCH to D144, carry DL PS D256, domain D384, background/intera SET DL BE traffic D768, ctive services. FRCCHLTYPE DlBeTraffThs threshold on Enumeratio D1024, When the PARA(Optional OnHsdpa HSDPA n Type D1536, maximum DL ) D1800, service rate is D2048, higher than or D3600, equal to this D7200, threshold, the D10100, service will be D13900 carried on HSDSCH. Otherwise, it will be carried on

8, 16, 32, 64, 128, 144, 256, 384, 768, 1024, 1536, 1800, 2048, 3600, 7200, 10100, 13900

8/7/2013

华为机密,未经许可不得扩散

第209页,共3267页

162734118.xls.ms_office1
Duration from when the BE TX power is beyond the threshold Ea to when the event ADD Ea is triggered or CELLQUALIT from when the BE BE Trigger YMEAS(Option TX power is Interval DlBeTrigTim Time Of Event al) below the Type eE E SET threshold Eb to QUALITYME when the event AS(Optional) Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power. Duration within which the measured power being lower than the threshold is allowed for BE ADD service. This CELLQUALIT parameter is used BE Trigger YMEAS(Option to avoid faulty Interval DlBeTrigTim Time Of Event al) reporting due to Type eF F SET instability of QUALITYME power. If the AS(Optional) value of this parameter is set too high, delay is caused. If the parameter is set to A, the hysteresis time is A x 10 ms. SET LDM(Optional) SET SATLDM(Opti onal)

文档密级:

1~6000

10~60000, step: 10

1~6000

10~60000, step: 10

DL CAC DlCacAvgFilt smoothing erLen filter length

Length of smoothing filter window of downlink CAC.

Interval Type

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第210页,共3267页

162734118.xls.ms_office1
Different admission policies are used for dedicated channel and common channel users. For common channel users, resources instead of separate power admission decision are reserved. For dedicated channel ADD users, according Interval CELLCAC(Opti to the current load Type onal) factor and the characteristics of the new call, the CAC algorithm predicts the new TX power with the assumption of admitting the new call, then plus with the premeditated common channel DL load factor to get the predicted DL load factor.

文档密级:

DlCCHLoad RsrvCoeff

DL common channel load reserved coefficient

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第211页,共3267页

162734118.xls.ms_office1

文档密级:

DL total DlCellTotalT power hd threshold

Admission threshold of the total cell downlink power. If the value is too high, too many ADD users will be Interval CELLCAC(Opti admitted. Type onal) However, the throughput of a single user is easy to be limited. If the value is too low, cell capacity will be wasted.

0~100

0~1, step:0.01

Downlink Compression DlCmMethod Method

This parameter specifies the compression method that the NodeB supports in the downlink. - SF/2: SF reduction by two ADD HIGHER_LAYE Bit Field NODEBLMTP R_SCHDL: Type ARA(Optional) higher layer scheduling If both SF/2 and HIGHER_LAYE R_SCHDL are selected, the NodeB supports both of the compression methods in the

SF/2, HIGHER_L AYER_SC HDL

SF/2, HIGHER_L AYER_SC HDL

8/7/2013

华为机密,未经许可不得扩散

第212页,共3267页

162734118.xls.ms_office1

文档密级:

DLCODENO

Reserved DL code No

Number of the DL code to be ADD reserved. For RESERVEOVS details, refer to F(Mandatory) the 3GPP TS 25.213 protocol.

Interval Type

0~255

0~255

The percentage of the conversational AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR DL threshold ADD service is Interval DlConvAMR of Conv AMR CELLCAC(Opti accessing, the Type Thd service onal) RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the DL load of a cell

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第213页,共3267页

162734118.xls.ms_office1
The percentage of the conversational non-AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That DL threshold is, when a nonADD of Conv AMR service is DlConvNonA CELLCAC(Opti non_AMR accessing, the MRThd onal) service RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of a nonAMR speech service, this service will be rejected. If the DL load of a cell Number of users selected in a DL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter ADD are the CS CELLLDR(Opti domain DL CS should DlCSInterRat onal) subscribers. be HO user ShouldBeHO ADD Because the CS number UeNum NODEBLDR(O domain ptional) subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively

文档密级:

Interval Type

0~100

0~1, step:0.01

Interval Type

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第214页,共3267页

162734118.xls.ms_office1
Number of users selected in a DL LDR CS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the ADD CS domain CELLLDR(Opti DL CS should subscribers. DlCSInterRat onal) not be HO user Because the CS ShouldNotHO ADD number domain UeNum NODEBLDR(O subscribers are ptional) session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it Downlink Bit SET increases DlDcccRateT Rate Threshold DCCC(Optional algorithm hd For DCCC ) processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum DL rate is greater than the

文档密级:

Interval Type

1~10

1~10

D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第215页,共3267页

162734118.xls.ms_office1
Maximum DL rate during network planning when coverage of the entire cell is ensured. When the DL TCP is limited, the current rate is reduced to the full coverage rate if the current rate is ADD greater than the D8, D16, CELLDCCC(O full coverage rate. Downlink Full D32, D64, ptional) For a BE service DlFullCvrRat Coverage Bit Enumeratio D128, SET that has a low e Rate n Type D144, DCCC(Optional maximum rate, D256, D384 ) the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the DCCC algorithm is applied to BE services whose maximum DL rate is greater than the

文档密级:

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第216页,共3267页

162734118.xls.ms_office1

文档密级:

DlGBR

Downlink GBR for BE service

This parameter SET specifies the DL USERGBR(Opt GBR of the BE ional) service.

D0, D8, D16, D32, Enumeratio D64, D128, n Type D144, D256, D384

0, 8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第217页,共3267页

162734118.xls.ms_office1
Some cell resources can be reserved for handover UEs to guarantee handover success rate and improve access priority of handover services. This SF4(SF4), parameter defines SF8(SF8), the quantity of SF16(SF16) downlink code , and CE resources SF32(SF32) reserved for , DL handover ADD handover. SFOFF SF64(SF64) DlHoCeCode credit and code CELLCAC(Opti Enumeratio refers to that no , ResvSf reserved SF onal) n Type resources is SF128(SF1 reserved. SF32 28), refers to that a SF256(SF2 code resource 56), with SF = 32 and SFOFF(SF its corresponding OFF) credit resource are reserved. The backer position the value is in {SF4,SF8,SF16,S F32,SF64,SF128, SF256,SFOFF}, the less code and credit resources

文档密级:

SF4,SF8,SF 16,SF32,SF 64,SF128,S F256,SFOF F

8/7/2013

华为机密,未经许可不得扩散

第218页,共3267页

162734118.xls.ms_office1
The percentage of the handover service admission threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to DL handover ADD a cell, the RNC DlHOThd access CELLCAC(Opti evalutates the threshold onal) measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this Reserved DL power factor for HSUPA user. The higher the value is, the more resources ADD reserved for the DL HSUPA DlHSUPARs CELLCAC(Opti HSUPA control reserved factor vdFactor onal) channel, which leads to resource waste. If the value is too low, HSUPA user quality may be impacted.

文档密级:

Interval Type

0~100

0~1, step:0.01

Interval Type

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第219页,共3267页

162734118.xls.ms_office1

文档密级:

DL activity DL AF of R99 SET factor of the R99 Interval DlInteractAF interactive ADMCTRL(Op interactive Type service tional) service.

0~100

0~1, step: 0.01

DL HO DlInterFreqH maximum oBWThd bandwidth

The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell ADD load is decreased. Interval CELLLDR(Opti However, high Type onal) value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is to

0~400000

0~400000

8/7/2013

华为机密,未经许可不得扩散

第220页,共3267页

162734118.xls.ms_office1

文档密级:

The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find ADD a qualified target DlInterFreqH DL HO load Interval CELLLDR(Opti cell for the blind oCellLoadSpa space threshold Type onal) handover. ceThd Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the interfrequency blind handover occurs.

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第221页,共3267页

162734118.xls.ms_office1
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in DL LDRexecuting ADD DlLdrAMRR AMR rate downlink LDRInterval CELLLDR(Opti ateReduction reduction RAB AMR voice Type onal) RabNum number service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme-underload). If the parameter value is too low, the LDR SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter window of downlink LDR.

文档密级:

1~10

1~10

DL LDR DlLdrAvgFilt smoothing erLen filter length

Interval Type

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第222页,共3267页

162734118.xls.ms_office1
Number of RABs selected in a DL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the ADD parameter to a CELLLDR(Opti comparatively onal) low value. If the Interval ADD high-rate Type NODEBLDR(O subscribers ptional) occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively

文档密级:

DL LDR-BE DlLdrBERate rate reduction ReductionRab RAB number Num

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第223页,共3267页

162734118.xls.ms_office1
Reserved SF threshold in downlink credit LDR. The downlink credit LDR could be triggered only when the SF factor corresponding to the downlink SF4(SF4), reserved credit is SF8(SF8), higher than the SF16(SF16) ADD uplink or , CELLLDR(Opti downlink credit SF32(SF32) SF4,SF8,SF onal) SF reserved , Enumeratio 16,SF32,SF ADD threshold. The SF64(SF64) n Type 64,SF128,S NODEBLDR(O lower the , F256 ptional) parameter value SF128(SF1 is, the easier the 28), credit enters the SF256(SF2 congestion status, 56) the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a

文档密级:

DL LDR credit SF DlLdrCreditS reserved fResThd threshold

8/7/2013

华为机密,未经许可不得扩散

第224页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as , CELLLDR(Opti DlLdrFirstAction. Enumeratio CSInterRat onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

DlLdrEighth Action

DL LDR eighth action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第225页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR fifth onal) , DlLdrFifthAc DlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第226页,共3267页

162734118.xls.ms_office1
NOACT: No NoAct(no load reshuffling action), action is taken. InterFreqL INTERFREQLD DHO(interHO: The interfreq load frequency load handover), handover is BERateRed performed. (BE traff NoAct,Inter BERATERED: rate FreqLDHO, Channels are reduction), BERateRed, reconfigured for QoSRenego QoSRenego the BE service. (uncontrolle ,CSInterRat QOSRENEGO: d real-time ShouldBeL ADD The renegotiation traff Qos reDHO,PSInt CELLLDR(Opti on the QoS of the negotiation) erRatShould DL LDR first onal) uncontrollable , DlLdrFirstAct Enumeratio BeLDHO,A action ADD real-time service CSInterRat ion n Type MRRateRed NODEBLDR(O is performed. ShouldBeL ,MBMSDec ptional) CSINTERRATS DHO(CS Power,Code HOULDBELDH domain Adj,CSInter O: The inter-RAT inter-rat RatShouldN SHOULDBE load should be otLDHO,PS handover of the load InterRatSho CS domain is handover), uldNotLDH performed. PSInterRatS O PSINTERRATS houldBeLD HOULDBELDH HO(PS O: The inter-RAT domain SHOULDBE load inter-rat handover of the should be PS domain is load performed. handover),

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第227页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , DlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

DlLdrFourth Action

DL LDR fourth action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第228页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR ninth , DlLdrNinthA CELLLDR(Opti DlLdrFirstAction. Enumeratio action CSInterRat ction onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第229页,共3267页

162734118.xls.ms_office1
Number of RABs selected in a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is ADD analogous to the DL LDR un- CELLLDR(Opti setting of BE DlLdrPsRTQ ctrl RT Qos re- onal) service rate Interval osRenegRab nego RAB ADD reduction Type Num num NODEBLDR(O subscriber ptional) number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS

文档密级:

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第230页,共3267页

162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds

文档密级:

DL LDR DlLdrRelThd release threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第231页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , DlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

DL LDR DlLdrSecond second action Action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第232页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR , DlLdrSeventh CELLLDR(Opti DlLdrFirstAction. Enumeratio seventh action CSInterRat Action onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第233页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR sixth onal) , DlLdrSixthAc DlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第234页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR tenth , DlLdrTenthA CELLLDR(Opti DlLdrFirstAction. Enumeratio action CSInterRat ction onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第235页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR third onal) , DlLdrThirdA DlLdrFirstAction. Enumeratio action ADD CSInterRat ction The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O

8/7/2013

华为机密,未经许可不得扩散

第236页,共3267页

162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds If the DL load state of the cell is ADD lasted longer than Interval CELLLDM(Opt this threshold, the Type ional) DL load state of the cell transfers.

文档密级:

DL LDR DlLdrTrigTh trigger d threshold

0~100

0~1, step:0.01

DL State Trans DlLdTrnsHys Hysteresis Time threshold

10~600000 10~600000

Downlink Maximum DlMaxNumO Number of fTfc TFC

This parameter specifies the maximum number of TFCs (Transport Format D16, D32, Combination) D48, D64, ADD allowed in the D96, D128, NODEBLMTP Enumeratio downlink. The D256, ARA(Optional) n Type larger the value of D512, this parameter, D1024 the larger the number of available TFCs in the downlink.

16, 32, 48, 64, 96, 128, 256, 512, 1024

8/7/2013

华为机密,未经许可不得扩散

第237页,共3267页

162734118.xls.ms_office1

文档密级:

ADD Reserved DL DL MBMS DlMBMSRsv CELLCAC(Opti power factor for reserved factor dFactor onal) MBMS service.

Interval Type

0~100

0~1, step:0.01

DL TCP Measurement DlMeasFilter Filter Coef Coefficient

Smooth filtering coefficient for DL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. ADD Smoothness is D0, D1, CELLQUALIT decided by the D2, D3, D4, YMEAS(Option filtering D5, D6, D7, al) coefficient of the Enumeratio D8, D9, SET measurement. n Type D11, D13, QUALITYME The greater the D15, D17, AS(Optional) filtering D19 coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower.

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19

This parameter determines whether Downlink Mid SET automatic or AUTO_CA Bit Rate DlMidRateCa DCCC(Optional manual mode is Enumeratio LC, 0, 1 Calculate lc ) used for 3-step n Type HAND_AP Method adjustment of the POINT DL intermediate rate.

8/7/2013

华为机密,未经许可不得扩散

第238页,共3267页

162734118.xls.ms_office1

文档密级:

Threshold of the DL intermediate rate when the 3step mode is used D16, D32, Downlink Mid SET 16, 32, 64, for DL rate D64, D128, DlMidRateTh Bit Rate DCCC(Mandato Enumeratio 128, 144, adjustment and D144, d Threshold ry) n Type 256, 384 the manual mode D256, D384 is used for DL intermediate rate adjustment.

8/7/2013

华为机密,未经许可不得扩散

第239页,共3267页

162734118.xls.ms_office1
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL AMR speech rate. If the TFO/TrFO does not exist, the CN has the associated encoder and the RNC delivers the RATE SET CONTROL DL Mode AMRC(Optiona command to the Change l) CN and starts the Interval DlModeChan Waiting Timer SET timer. If the Type geTimerLen Length AMRCWB(Opt TFO/TrFO exists, ional) the CN has no associated encoder and the local RNC delivers to the peer RNC a command requesting the AMR mode at a lower level. In addition, the local RNC starts the timer. After the peer RNC

文档密级:

1~4294967 1~4294967 295 295

DL activity DL AF of R99 SET factor of the R99 Interval DlNonAmrCo non AMR conv ADMCTRL(Op non AMR Type nvAF service tional) conversational service.

0~100

0~1, step: 0.01

DL OLC DlOlcAvgFilt smoothing erLen filter length

SET LDM(Optional) SET SATLDM(Opti onal)

Length of smoothing filter window of downlink OLC.

Interval Type

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第240页,共3267页

162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti downlink load. Type onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing

文档密级:

DL OLC fast DlOlcFTFRst TF restrict rctRabNum RAB number

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第241页,共3267页

162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti downlink load. onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of downlink OLC fast TF restriction L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the LDM(Optional) anti-slow-fading SET capability, but the SATLDM(Opti lower the signal onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

DL OLC fast DlOlcFTFRst TF restrict rctTimes times

Interval Type

0~100

0~100

DL overload DlOlcMeasFil measure filter terCoeff coeff

D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19

D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19

8/7/2013

华为机密,未经许可不得扩散

第242页,共3267页

162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than

文档密级:

DL OLC DlOlcRelThd release threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第243页,共3267页

162734118.xls.ms_office1
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on DL OLC traff ADD the action rules to Interval DlOlcTraffRe release RAB CELLOLC(Opti perform this Type lRabNum number onal) action. This parameter defines the maximum number of RABs released in executing downlink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The SET LDM(Optional) DL OLC trigger Interval SET hysteresis. Type SATLDM(Opti onal)

文档密级:

0~10

0~10

DL OLC DlOlcTrigHys trigger t hysteresis

1~6000

10~60000, step:10

8/7/2013

华为机密,未经许可不得扩散

第244页,共3267页

162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than

文档密级:

DL OLC DlOlcTrigTh trigger d threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第245页,共3267页

162734118.xls.ms_office1
The percentage of other service thresholds to the 100% downlink load. The services refer to other admissions except the conversational AMR service, conversational non-AMR service, and handover scenarios. It is applicable to ADD algorithm 1 and Interval CELLCAC(Opti algorithm 2. The Type onal) parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the

文档密级:

DL threshold DlOtherThd of other services

0~100

0~1, step:0.01

DLOVSFSF

Reserved DL code OVSF

Orthogonal Variable Spreading Factor SF4, SF8, ADD (OVSF) of the SF16, SF32, RESERVEOVS DL code to be Enumeratio SF64, F(Mandatory) reserved. For n Type SF128, details, refer to SF256 the 3GPP TS 25.213 protocol.

SF4,SF8,SF 16,SF32,SF 64,SF128,S F256

8/7/2013

华为机密,未经许可不得扩散

第246页,共3267页

162734118.xls.ms_office1
Number of users selected in a DL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis ADD of the actual CELLLDR(Opti circumstances. If DL PS should DlPSInterRat onal) the high-rate Interval be HO user ShouldBeHO ADD subscribers Type number UeNum NODEBLDR(O occupy a high ptional) proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm

文档密级:

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第247页,共3267页

162734118.xls.ms_office1
Number of users selected in a DL LDR PS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion Rate adjustment switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, DL rate of AMR services can be adjusted. Inter-frequency handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR services to ensure the QoS.

文档密级:

ADD CELLLDR(Opti DL PS should DlPSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)

Interval Type

1~10

1~10

Switch Of SET AMR DlQosAmrAd QOSACT(Optio Downlink Rate jSwitch nal) Adjustment

Enumeratio NO, YES n Type

NO, YES

InterFreq HO SET DlQosAmrInt Switch For QOSACT(Optio erFreqHoSwit Downlink nal) ch AMR

Enumeratio NO, YES n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第248页,共3267页

162734118.xls.ms_office1
Inter-RAT handover switch of link stability control for DL QoS of AMR SET services. When QOSACT(Optio the parameter is Enumeratio NO, YES nal) set to YES, inter- n Type RAT handover can be performed for AMR services to ensure the QoS. Timer length for downlink Qos measurement. This parameter controls the time lengths for the inter-frequency and inter-RAT measurement based on Qos. After interfrequency or interRAT ADD measurement CELLQOSHO( starts, if no interOptional) frequency Interval 0~512 SET handover is Type QOSHO(Option performed when al) this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the interfrequency or interRAT

文档密级:

InterRat HO DlQosAmrInt Switch For erRatHoSwitc Downlink h AMR

NO, YES

Down Link DLQosMcTi Qos Measure merLen timer length

0~512

8/7/2013

华为机密,未经许可不得扩散

第249页,共3267页

162734118.xls.ms_office1
Inter-frequency handover switch of link stability control for DL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of WAMR services can be adjusted. Inter-frequency handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR services to ensure the QoS. Inter-RAT handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, interRAT handover can be performed for WAMR services to ensure the QoS.

文档密级:

InterFreq HO SET DlQosVpInter Switch For QOSACT(Optio FreqHoSwitc Downlink VP nal) h

Enumeratio NO, YES n Type

NO, YES

Switch For SET DlQosWAmr WAMR QOSACT(Optio AdjSwitch Downlink Rate nal)

Enumeratio NO, YES n Type

NO, YES

InterFreq HO SET DlQosWAmrI Switch For QOSACT(Optio nterFreqHoS WAMR nal) witch Downlink

Enumeratio NO, YES n Type

NO, YES

InterRat HO DlQosWAmrI Switch For nterRatHoSwi WAMR tch Downlink

SET QOSACT(Optio nal)

Enumeratio NO, YES n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第250页,共3267页

162734118.xls.ms_office1
OFF(The switch of DL R99 When the switch congestion is on, the control is DL R99 SET congestion off), DlR99CongC Congestion DPUCFGDAT detection and Enumeratio ON(The trlSwitch Control Switch A(Optional) control for DL n Type switch of R99 service is DL R99 supported. congestion control is on) This parameter determines whether the DL Downlink SET rate is lowered to 2_Rates, DlRateDnAdj Rate Decrease DCCC(Optional the minimum rate Enumeratio 3_Rates Level Adjust Level ) in one step or two n Type steps for BE service set up on DCH in This parameter determines whether the DL Downlink SET rate is raised to 2_Rates, DlRateUpAdj Rate Increase DCCC(Optional the maximum rate Enumeratio 3_Rates Level Adjust Level ) in one step or two n Type steps for BE service set up on DCH in

文档密级:

OFF,ON

2_Rates, 3_Rates

2_Rates, 3_Rates

8/7/2013

华为机密,未经许可不得扩散

第251页,共3267页

162734118.xls.ms_office1
Frequency hysteresis of downlink RSCP Qos. This parameter controls the used frequency thresholds for the inter-frequency and inter-RAT measurement based on Qos. In event mode, if ADD the interCELLQOSHO( frequency and Optional) inter-RAT Interval SET measurement Type QOSHO(Option events occurred al) for the downlink Qos reason, the used frequency threshold of the RSCP measurement quantity is equal to the used frequency threshold that is configured on the BAM server in coverage measurement plus

文档密级:

Down Link RSCP UsedDlRscpQosH Freq THD yst Hyst

-15~15

-15~15

8/7/2013

华为机密,未经许可不得扩散

第252页,共3267页

162734118.xls.ms_office1
This parameter refers to the downlink spreading factor used by the RL carrying single service with the CN domain in typical D4(SF4), environment. The D8(SF8), downlink transmit D16(SF16), power parameters D32(SF32), of common ADD D64(SF64), services are CELLRLPWR( obtained by Enumeratio D128(SF12 Mandatory) n Type 8), emulation, and D256(SF25 the value of 6), [Downlink D512(SF51 spreading factor] 2) depends on such factors as service rate and puncturing limitation. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

DlSF

Downlink spreading factor

SF4, SF8, SF16, SF32, SF64, SF128, SF256, SF512

8/7/2013

华为机密,未经许可不得扩散

第253页,共3267页

162734118.xls.ms_office1
This parameter determines whether the compressed mode is limited to the downlink SF. Starting the compressed mode is resource consuming for the fast-moving UEs. Whether the spreading factors of the current DCH channels SET FALSE(Not should be CMCF(Optional Enumeratio Limited), FALSE,TR considered when ) n Type TRUE(Limi UE the switch ted) controlling the start compressed mode is set. When the switch is set to FALSE, you can infer that the start compressed mode does not consider the spreading factors of the DCH channels; when the switch is set to TRUE,

文档密级:

DlSFLimitC MInd

Dl SF limit CM ind

8/7/2013

华为机密,未经许可不得扩散

第254页,共3267页

162734118.xls.ms_office1
CM implementation approach selection basis. When the downlink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the ADD high-layer CELLCMCF(O scheduling will be D8, D16, ptional) preferred. Enumeratio D32, D64, 8,16,32,64,1 SET The SF/2 n Type D128, D256 28,256 CMCF(Optional approach ) consumes more system resources and therefore this approach is recommended only for low-rate users. The highlayer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively

文档密级:

DL SF DlSFTurnPoi threshold nt

DL AF of DlSrbActFact SRB or

SET DL activity ADMCTRL(Op factor of SRB. tional)

Interval Type

0~100

0~1, step: 0.01

DL AF of R99 SET DL activity Interval DlStreamAF Streaming ADMCTRL(Op factor of the R99 Type service tional) streaming service.

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第255页,共3267页

162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use HS-DSCH to carry DL PS domain streaming services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HSDSCH. Otherwise, it will be carried on Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the upper threshold E1, AMRC lowers the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater

文档密级:

DL streaming SET traffic FRCCHLTYPE DlStrThsOnH threshold on PARA(Optional sdpa HSDPA )

D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

DlThdE1

DL E1 Event Relative Threshold

SET AMRC(Optiona l) SET AMRCWB(Opt ional)

Interval Type

0~559

0~55.9, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第256页,共3267页

162734118.xls.ms_office1
Threshold E2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the upper SET threshold E2, AMRC(Optiona AMRC stops l) adjusting the DL Interval SET AMR speech rate. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less

文档密级:

DlThdE2

DL E2 Event Relative Threshold

0~559

0~55.9, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第257页,共3267页

162734118.xls.ms_office1
Threshold F1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the lower SET threshold F1, AMRC(Optiona AMRC raises the l) DL AMR speech Interval SET rate by one level. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less

文档密级:

DlThdF1

DL F1 Event Relative Threshold

1~560

0.1~56, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第258页,共3267页

162734118.xls.ms_office1
Threshold F2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the lower SET threshold F2, AMRC(Optiona AMRC stops l) adjusting the DL Interval SET AMR speech rate. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater

文档密级:

DlThdF2

DL F2 Event Relative Threshold

1~560

0.1~56, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第259页,共3267页

162734118.xls.ms_office1
When the algorithm 2 is used, this parameter defines the total equivalent user number corresponding to the 100% downlink load. he parameter should be related to the admission threshold and DL total ADD actual condition Interval DlTotalEqUs equivalent user CELLCAC(Opti of the network. If Type erNum number onal) the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. Duration from when the VP TX power is beyond ADD the threshold Ea CELLQUALIT or below the VP Trigger YMEAS(Option threshold Eb to Interval DlVpTrigTim Time Of Event al) when the event Ea Type eE E SET or Eb is triggered. QUALITYME This parameter is AS(Optional) used to avoid faulty reporting due to instability of power.

文档密级:

1~200

1~200

1~6000

10~60000, step: 10

8/7/2013

华为机密,未经许可不得扩散

第260页,共3267页

162734118.xls.ms_office1

文档密级:

DLYGB

This parameter Expected diff ADD specifies the Interval delay guardIMAGRP(Optio expected diff Type band nal) delay guard-band. (Unit: cells)

3~505

3~505

DomainType

Blocked domain type

ADD RNCALLCELL BLK(Mandator y)

This parameter specifies the blocked domain type.

PsBlk(BLO PsBlk, CK PS), Enumeratio CsAndPsBl CsAndPsBl n Type k(BLOCK k CS AND PS)

Enable Door DOOR_ENGI Status Alarm NE_MASK Reporting

This parameter specifies whether CLOSE(Clo ADD Enumeratio se), CLOSE,OP the alarm EMU(Optional) reporting for door n Type OPEN(Ope EN access is enabled. n)

8/7/2013

华为机密,未经许可不得扩散

第261页,共3267页

162734118.xls.ms_office1
The DSP code must be input in hexadecimal format and cannot be 0. It is unique in the SS7 network. The number of the DSP code bits is equal to that of the OPC code bits. If the number of OSP code bits is ADD BIT14, the value Interval N7DPC(Mandat range of DSP Type ory) code is from H'1 to H'3FFF (1~16383).If the number of OSP code bits is BIT16, the value range of DSP code is from H'1 to H'1~H'FFFF(1~6 5535). If BIT24, the value range is from H'1 to H'FFFFFF (1~16777215).

文档密级:

DPC

DSP code

1~1677721 1~1677721 5 5

DPCCH DpcchBurst1 Transmission Burst 1

This parameter specifies the number of consecutive subframes that SET can be transmitted DTXDRXPAR Enumeratio D1, D2, D5 1,2,5 on the UL A(Optional) n Type DPCCH during one DtxCycle1. For details, refer to the 3GPP TS 25.331 protocol.

8/7/2013

华为机密,未经许可不得扩散

第262页,共3267页

162734118.xls.ms_office1

文档密级:

DPCCH DpcchBurst2 Transmission Burst 2

This parameter specifies the number of consecutive subframes that SET can be transmitted DTXDRXPAR Enumeratio D1, D2, D5 1,2,5 on the UL A(Optional) n Type DPCCH during one DtxCycle2. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies whether the DPCCH slot format 1 or DPCCH slot format 4 is used when all the SLOT_FOR SLOT_FOR SET traffic and Enumeratio MAT_1, MAT_1, FRC(Optional) signaling are n Type SLOT_FOR SLOT_FOR transmitted over MAT_4 MAT_4 the HSPA channel and when the number of feedback information (FBI) bits is 0. The DSP code must be input in divided number ADD format. In N7DPC(Mandat addition, it should String Type ory) be allocated in the SS7 network and cannot be repeated.

prefered DPCCH slot DpcchSlotFm format for tForHspa HSPA

DPCDNF

DSP code

1~11 characters

ADD CELLSETUP(O DPCH ptional) DpchDivMod diversity mode ADD forMIMO for MIMO user NRNCCELL(O ptional)

This parameter indicates DPCH None, None, Enumeratio diversity mode for STTD, CP1 STTD, CP1 n Type MIMO user.

8/7/2013

华为机密,未经许可不得扩散

第263页,共3267页

162734118.xls.ms_office1

文档密级:

ADD CELLSETUP(O DPCH priority ptional) DpchPrioTxD Tx diversity ADD iversityMode mode NRNCCELL(O ptional)

This parameter indicates the TX diversity preferably selected by DPCH.

None, None, Enumeratio STTD, CP1 STTD, CP1 n Type

DpcMode

DL power control mode

This parameter specifies the DL power control mode. - SINGLE_TPC, a fast power control mode, indicates that a unique TPC command is sent in each timeslot on the DPCCH. TPC_TRIPLET_I SINGLE_T SINGLE_T N_SOFT, a slow PC, PC, SET power control TPC_TRIP TPC_TRIP Enumeratio FRC(Optional) mode, indicates LET_IN_S LET_IN_S n Type that the same OFT, OFT, TPC command is TPC_AUT TPC_AUT sent over three O_ADJUST O_ADJUST timeslots. It is applicable to soft handover, and it can decrease the power deviation. TPC_AUTO_AD JUST, an automatic adjustment mode, indicates that the value of

8/7/2013

华为机密,未经许可不得扩散

第264页,共3267页

162734118.xls.ms_office1
Type of the DSP. IUCS: indicating that the DSP is on the control plane or user plane of the CS domain of the Iu interface IUPS: indicating that the DSP is on the control plane of the PS domain of the Iu interface IUR: indicating an RNC signalling point ADD IUCS_ALCAP: N7DPC(Mandat indicating that the ory) DSP is on the user plane of the CS domain of the Iu interface IUCS_RANAP: indicating that the DSP is on the control plane of the CS domain of the Iu interface STP: indicating a signalling transmission point.AAL2SWIT CH:indicating an This parameter specifies the STR number of the IPLOPTST(Ma destination port of ndatory) the IP loopback test. This parameter STR specifies the IPLOPTST(Ma number of the slot ndatory) that holds the DPUb.

文档密级:

DPCT

DSP type

IUCS(IuCS node), IUPS(Iu-PS node), IUR(Iur node), IUCS_RAN AP(Iu-CS RANAP node), Enumeratio IUCS_ALC n Type AP(Iu-CS ALCAP node), AAL2SWIT CH(Aal2 switch node), STP(STP node)

IUCS, IUPS, IUR, IUCS_RAN AP, IUCS_ALC AP, AAL2SWIT CH, STP

DPORTNO

Dst Port NO.

Interval Type

1024~3584

1024 to 3584

DPUSN

DPUb Slot No.

Interval Type

8~19

8 to 19

8/7/2013

华为机密,未经许可不得扩散

第265页,共3267页

162734118.xls.ms_office1

文档密级:

DPX

DSP index

ADD N7DPC(Mandat ory) ADD M3DE(Mandato ry) ADD MTP3LKS(Man datory) ADD ADJNODE(Ma ndatory) ADD CNNODE(Man datory) ADD NRNC(Mandat ory) ADD MTP3RT(Mand atory)

Index of the DSP to be Interval added.Uniquely Type identifying a DSP.

0~118

0~118

DR

Activation direction

This parameter ACT specifies the SINK, VCLCC(Option direction of Enumeratio SOURCE, al) activating the n Type BOTH check on a VCL.

SINK, SOURCE, BOTH

8/7/2013

华为机密,未经许可不得扩散

第266页,共3267页

162734118.xls.ms_office1
Dynamic resource allocation switch. 1) DRA_AQM_SWI TCH: When the switch is on, the active queue management algorithm is used for the RNC. 2) DRA_BE_EDCH _TTI_RECFG_S WITCH: When the switch is on, the TTI could be reconfigured to HSUPA traffic dynamically between 2ms and 10ms. 3) DRA_BE_RATE _DOWN_BF_HO _SWITCH: When the switch is on, the bandwidth for BE services is reduced before soft handover. It is recommended This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. When choosing a DRD candidate cell, if the Ec/No value of the current cell is greater than the threshold of interRAT/interfrequency neighboring cell, the DRD is permitted.

文档密级:

DraSwitch

Dynamic resource allocation switch

SET CORRMALGO SWITCH(Optio nal)

Bit Field Type

DRA_AQM _SWITCH, DRA_BE_E DCH_TTI_ RECFG_S WITCH, DRA_BE_ RATE_DO WN_BF_H O_SWITC H, DRA_DCC C_SWITCH , DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH, DRA_HSD PA_STATE _TRANS_S WITCH, DRA_HSU PA_DCCC_ SWITCH, DRA_HSU PA_STATE _TRANS_S WITCH, DRA_IU_Q

DRA_AQM _SWITCH, DRA_BE_E DCH_TTI_ RECFG_S WITCH, DRA_BE_ RATE_DO WN_BF_H O_SWITC H, DRA_DCC C_SWITCH , DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH, DRA_HSD PA_STATE _TRANS_S WITCH, DRA_HSU PA_DCCC_ SWITCH, DRA_HSU PA_STATE _TRANS_S WITCH, DRA_IU_Q

Drd Ec/N0 DRDEcN0Th threshold reshhold

ADD GSMNCELL(O ptional) ADD INTERFREQN CELL(Optional)

Interval Type

-24~0

12~0,Step:0 .5

8/7/2013

华为机密,未经许可不得扩散

第267页,共3267页

162734118.xls.ms_office1

文档密级:

DRL AAL2 establishment DrlAal2EstIn indication dTmr timer

A timer to SET DRNC wait for STATETIMER( AAL2 setup Optional) indication.

Interval Type

1~10000

1~10000

A timer to DRL SET DRNC wait for DrlRecfgCmit reconfiguration STATETIMER( radio link Tmr commit timer Optional) reconfiguration commit.

Interval Type

1~10000

1~10000

Max interDRMaxGSM RAT direct Num retry number

This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides SET the size of the DRD(Optional) candidate set for Interval ADD inter-RAT DRD. Type CELLDRD(Opt The value 0 ional) indicates that inter-RAT RAB DRD is not applicable. This parameter can be cell-oriented.

0~5

0~5

Drnc Parameter for DrncBeDlRlc BE Downlink QosSwitch RLC QOS

If the parameter is set to YES, QoS control for SET DL BE services QOSACT(Optio based on RLC Enumeratio NO, YES nal) retransmission n Type can be performed when the best cell is in the DRNC.

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第268页,共3267页

162734118.xls.ms_office1

文档密级:

When the buffer duration of queue 0 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD0 queue 0 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the CBR queue.

10~150

10 to 150

When the buffer duration of queue 1 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD1 queue 1 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the RTVBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第269页,共3267页

162734118.xls.ms_office1

文档密级:

When the buffer duration of queue 2 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD2 queue 2 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the NRTVBR queue.

10~150

10 to 150

When the buffer duration of queue 3 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD3 queue 3 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the UBR queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第270页,共3267页

162734118.xls.ms_office1

文档密级:

When the buffer duration of queue 4 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD4 queue 4 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the UBR+ queue.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第271页,共3267页

162734118.xls.ms_office1

文档密级:

When the buffer duration of queue ADD Packet discard 5 is larger than or PORTFLOWC Interval DROPPKTT threshold of equal to the value TRLPARA(Opt Type HD5 queue 5 of this parameter, ional) packets begin to be discarded.

10~150

10 to 150

8/7/2013

华为机密,未经许可不得扩散

第272页,共3267页

162734118.xls.ms_office1
Direct retry switch. 1) DR_RRC_DRD_ SWITCH(DRD switch for RRC connection): When the switch is on, DRD and redirection is performed for RRC connection if retry is required. SET 2) CORRMALGO DR_RAB_SING_ SWITCH(Optio DRD_SWITCH( nal) DRD switch for single RAB): When the switch is on, DRD is performed for single service if retry is required. 3) DR_RAB_COM B_DRD_SWITC H(DRD switch for combine RAB): When the switch is on, DRD is This parameter specifies the size of patterns (that is, the number of SET subframes) that DTXDRXPAR can be received A(Optional) on the HS-SCCH. For details, refer to the 3GPP TS 25.331 protocol.

文档密级:

DrSwitch

Direct retry switch

Bit Field Type

DR_RRC_ DRD_SWI TCH, DR_RAB_S ING_DRD_ SWITCH, DR_RAB_ COMB_DR D_SWITC H

DR_RRC_ DRD_SWI TCH,DR_R AB_SING_ DRD_SWI TCH,DR_R AB_COMB _DRD_SWI TCH

DrxCycle

DRX Cycle

D4, D5, Enumeratio D8, D10, n Type D16, D20

4,5,8,10,16, 20

8/7/2013

华为机密,未经许可不得扩散

第273页,共3267页

162734118.xls.ms_office1

文档密级:

DRX cycle DRXCycleLe length nCoef coefficient

CN domain specific DRX cycle length ADD coefficient Interval CNDOMAIN(O broadcast on Type ptional) SIB1 and used by UEs in Idle Mode.

6~9

6~9

Paging DRX DrxCycleLen cycle Coef coefficient

This parameter specifies the UTRAN-specific Discontinuous Reception (DRX) cycle length coefficient. In connected mode, the UE uses the shorter one between CNspecific DRX cycle length coefficient and UTRAN-specific SET DRX cycle length Interval FRC(Optional) coefficient. In Type idle mode, the UE can use the DRX mode to receive paging indications so as to reduce power consumption; in this case, the UE needs to monitor only one paging indication in one paging occasion during each DRX cycle. - If the value of

3~9

3~9

8/7/2013

华为机密,未经许可不得扩散

第274页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the UE should monitor the transmission on the E-AGCH in the serving EDCH cell and the transmission on each E-RGCH in the serving EDCH radio link set if the data reception on the HS-SCCH overlaps with the data reception on the E-AGCH and on the E-RGCH. The value of this parameter is a Boolean value. For details, refer to the 3GPP TS This parameter specifies whether the parameters related to the DRX are valid. The parameters related to the DRX are optional and they can be set only when the parameters related to the DTX are set. Value OFF indicates that the parameters are invalid and cannot be set. Value ON indicates that the parameters are valid. This parameter specifies the number of the E1/T1 port bearing the PPP link.

文档密级:

UE DRX Grant DrxGrantMon Monitoring itoring Decision

SET DTXDRXPAR A(Optional)

TRUE, Enumeratio FALSE n Type

FALSE,TR UE

Drxvalid

DRX Parameter Switch

SET DTXDRXPAR A(Optional)

Enumeratio ON, OFF n Type

OFF,ON

DS1

ADD PPPLNK(Mand atory) E1T1 port No. ADD MPLNK(Manda tory)

Interval Type

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第275页,共3267页

162734118.xls.ms_office1

文档密级:

Switch for DsacAutoSwi auto DSAC tch

Whether to SET enable the DSACAUTOA automatically LGO(Optional) triggered DSAC algorithm.

Enumeratio OFF, ON n Type

OFF,ON

DSCP

PING IP(Optional) SET DSCPMAP(Ma Differentiated ndatory) services code ADD point SCTPLNK(Opti onal) SET PHBMAP(Man datory) Dsp No.

This parameter specifies the Interval DiffServ Code Type Point for the ping command.

0~63

0 to 63

DSPNO

STR This parameter Interval IPLOPTST(Ma specifies the Type ndatory) number of a DSP.

0~21

0 to 21

DST

DaylightSave

SET TZ(Optional)

This parameter specifies whether Enumeratio YES, NO the DST is used. n Type

YES, NO

Destination DSTE1T1LN link No. KN

This parameter specifies the destination end of ADD Interval timeslot cross TSCROSS(Man Type connection, datory) corresponding to the electrical port of the board.

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第276页,共3267页

162734118.xls.ms_office1

文档密级:

DSTIP

ADD IPRT(Mandator y) ADD Destination IP IPRTBIND(Ma address ndatory) ADD FLOW(Mandat ory)

This parameter specifies a destination IP address.

IP Address Type

0.0.0.0~255 .255.255.25 5

DSTMASK

Destination address mask

ADD This parameter IP Address IPRT(Mandator specifies a subnet Type y) mask. ADD This parameter IPRTBIND(Ma specifies the ndatory) subnet mask. IP Address Type

0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5

DSTMASK

Destination address mask

8/7/2013

华为机密,未经许可不得扩散

第277页,共3267页

162734118.xls.ms_office1

文档密级:

DSTTSN

Destination time slot No.

DtxCycle1

DPCCH Transmission Cycle 1

DtxCycle2

DPCCH Transmission Cycle 2

TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), This parameter TS7(Time_s specifies the lot_7), ADD number of the TS8(Time_s TSCROSS(Man Enumeratio destination end of lot_8), datory) n Type timeslot cross TS9(Time_s connection. lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time This parameter specifies the size D1, D4, of pattern 1 SET D5, D8, transmitted on the DTXDRXPAR Enumeratio D10, D16, UL DPCCH. For A(Optional) n Type D20 details, refer to the 3GPP TS 25.331 protocol. This parameter D4, D5, specifies the size D8, D10, of pattern 2 SET D16, D20, transmitted on the DTXDRXPAR Enumeratio D32, D40, UL DPCCH. For A(Optional) n Type D64, D80, details, refer to D128, D160 the 3GPP TS 25.331 protocol.

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

1,4,5,8,10,1 6,20

4,5,8,10,16, 20,32,40,64, 80,128,160

8/7/2013

华为机密,未经许可不得扩散

第278页,共3267页

162734118.xls.ms_office1
This parameter specifies the delay time for delay time of SET DTX DRX being DtxDrxEnabli DTX_DRX in FRC(Optional) effective after it is ngDelay action enabled. For details, see 3GPP TS 25.331. If the interval at which two consecutive patterns are transmitted on the UL DPCCH is DtxCycle2, a certain number of timeslots should SET Long DPCCH be transmitted DtxLongPrea DTXDRXPAR Preamble before data is mble A(Optional) transmitted on the DPCCH. This parameter specifies the number of timeslots. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies whether the parameters related to the DTX are valid. Value OFF DTX SET indicates that the Dtxvalid Parameter DTXDRXPAR parameters are Switch A(Optional) invalid and cannot be set. Value ON indicates that the parameters are valid.

文档密级:

D0, D1, 0, 1, 2, 4, 8, D2, D4, D8, Enumeratio 16, 32, 64, D16, D32, n Type 128 D64, D128

D2, D4, Enumeratio D15 n Type

2,4,15

Enumeratio ON, OFF n Type

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第279页,共3267页

162734118.xls.ms_office1

文档密级:

DUPLEX

This parameter specifies the duplex mode of the transmission Half(Half SET over the Ethernet duplex), Duplex Mode ETHPORT(Opti port. This Enumeratio Full(Full onal) parameter can be n Type duplex) set only when "Auto negotiation" is set to DISABLE.

Half(Half duplex), Full(Full duplex)

Period Timer Length For DynCellOpen Cell Dynamic JudgeTimerle ShutDown n feature

When the cell is automatically shut down, this SET parameter is used RNCCELLSHU to repeatedly Interval TDOWNPARA determine Type (Optional) whether the cell needs to be automatically enabled.

1~3600

1~3600

When the cell is automatically Protect Timer SET enabled, the cell Length For DynCellShutd RNCCELLSHU can be Interval Cell Dynamic ownProtectTi TDOWNPARA automatically Type ShutDown merlen (Optional) disabled again feature only after a period delay.

60~3600

60~3600

When the switch is on, the Cell dynamic shutdown algorithm of the Cell Dynamic SET OFF(switch local RNC cell is ShutDown RNCCELLSHU off), DynCellShut Enumeratio OFF, ON enabled. When Switch For TDOWNPARA ON(switch DownSwitch the switch is off, n Type RNC (Optional) on) the Cell dynamic shutdown algorithm of the local RNC cell is disabled.

8/7/2013

华为机密,未经许可不得扩散

第280页,共3267页

162734118.xls.ms_office1
OFF(switch off), When the switch ON_1(switc is on, the "Cell h on1), dynamic Enumeratio ON_2(switc shutdown" feature n Type h on2), is valid. ON_3(switc h on3) When DynShutDownTy pe is set to ForceShutDown, the cell will shut FORCESH down in the UTDOWN( shutdown time ForceShutD interval. When own), Enumeratio DynShutDownTy CONDITIO n Type pe is set to NALSHUT ConditionalShutD DOWN(Co own, the cell will nditionalSh shut down with utDown) some conditions in the shutdown time interval. This parameter specifies the number of the Interval 0~31 E1/T1 link that Type carries the fractional ATM/IMA link. Period of E-DCH throughput ratio measurement. This parameter specifies the period of E-DCH throughput ratio measurement. The throughput Interval 1~10000 ratio over the EType DCH is periodically measured to implement state transition from EDCH to FACH and DCCC algorithm on EDCH.

文档密级:

ADD Cell Dynamic CELLDYNSHU DynShutdown ShutDown TDOWN(Mand Switch Switch atory)

OFF, ON_1, ON_2, ON_3

ADD Cell Dynamic CELLDYNSHU DynShutDow ShutDown TDOWN(Optio nType Type nal)

FORCESH UTDOWN, CONDITIO NALSHUT DOWN

E1T1LNKN

Bearing link No.

ADD FRALNK(Mand atory)

0 to 31

SET E-DCH Throu E2FThrouMe UESTATETRA Meas Period asPeriod NS(Optional)

10~100000 Step: 10ms

8/7/2013

华为机密,未经许可不得扩散

第281页,共3267页

162734118.xls.ms_office1
Number of pending periods after the throughput ratio event 4B for state transition from EDCH to FACH is triggered. This E-DCH2F 4B SET parameter is used E2FThrouPT Pending Period UESTATETRA to prevent too AT Amount NS(Optional) many throughput ratio events 4B being reported. Pending time after the throughput ratio event 4B is triggered = value of this parameter This parameter is used to check whether the UE in the low activity state. If the UE is SET on the E-DCH E-DCH2F 4B UESTATETRA channel, the low E2FThrouThd Threshold NS(Optional) activity counter increases by 1 every time throughput ratio event 4B is reported.

文档密级:

Interval Type

0~1023

0~1023

Interval Type

0~384

0~384

8/7/2013

华为机密,未经许可不得扩散

第282页,共3267页

162734118.xls.ms_office1
Number of periods before the throughput ratio event 4B for state transition from EDCH to FACH is triggered. When the throughput ratio is below the lower threshold and remains so for the period specified by this parameter, the SET event 4B is E-DCH2F 4B E2FThrouTim UESTATETRA reported. This Period Amount eToTrig NS(Optional) parameter prevents unnecessary throughput ratio events that are caused by throughput ratio instability from being triggered. Time to trigger the throughput ratio event 4B = value of this parameter x 10 ms. The parameter specifies the number of codes (SF=256) used by the E-DCH Absolute Grant Channel (EAGCH). If the parameter value is ADD set too high, the Code Number EagchCodeN CELLHSUPA( downlink codes for E-AGCH um Optional) are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted. For details about this parameter, refer to 3GPP TS 25.433.

文档密级:

Interval Type

0~1023

0~1023

Interval Type

1~8

1~8

8/7/2013

华为机密,未经许可不得扩散

第283页,共3267页

162734118.xls.ms_office1

文档密级:

ECHOIP

Check IP address

Check IP address. The IP address to be checked must be ADD within the IP Address IPPATH(Manda network segment Type tory) specified by [Peer IP address] and [Peer subnet mask].

0.0.0.0~255 .255.255.25 5

Ec/N0 Adjustment EcN0AdjStep Step

SET RACHMEASU REPARA(Optio nal)

Ec/N0 Adjustment EcN0AdjTim Measurement erLen Period

SET RACHMEASU REPARA(Optio nal)

This parameter is used to count the adjusted step of Ec/N0 in the link quality adjust algorithm for EFACH. This parameter specifies the adjustment cycle of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmissions in the link quality adjust algorithm for E-FACH.

Interval Type

0~5000

0~5, step: 0.001

Interval Type

1~1000

10~10000, step: 10

8/7/2013

华为机密,未经许可不得扩散

第284页,共3267页

162734118.xls.ms_office1

文档密级:

Ec/N0 EcN0EffectTi effective time me

This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting SET from the time FRC(Optional) when the RRC Interval ADD connection Type CELLFRC(Opti request is onal) initiated) specified by this parameter. Check whether the reported Ec/N0 is valid before comparing it with EcN0Ths.

0~65535

0~65535

Maximum EcN0MaxDo Ec/N0 Down wnAdjStep Step

SET RACHMEASU REPARA(Optio nal)

SET Maximum RACHMEASU EcN0MaxUp Ec/N0 Up Step REPARA(Optio AdjStep nal)

This parameter specifies the maximum value that Ec/N0 can be stepped down in the link quality adjust algorithm for E-FACH. This parameter specifies the maximum value that Ec/N0 can be stepped up in the link quality adjust algorithm for EFACH.

Interval Type

0~5000

0~5, step: 0.001

Interval Type

0~5000

0~5, step: 0.001

8/7/2013

华为机密,未经许可不得扩散

第285页,共3267页

162734118.xls.ms_office1

文档密级:

EcN0Ths

Ec/N0 threshold

This parameter specifies the threshold for determining the signal quality in a SET cell. If the FRC(Optional) reported Ec/N0 Interval ADD exceeds the value Type CELLFRC(Opti of this parameter, onal) you can infer that the signal quality in the cell is good and a high code rate can be set for initial access.

0~49

-24.5~0

8/7/2013

华为机密,未经许可不得扩散

第286页,共3267页

162734118.xls.ms_office1

文档密级:

EDAY

End date

This parameter specifies the end SET date of the DST. Interval TZ(Mandatory) The value 30 and Type 31 is invalid in February.

1~31

1 to 31

This parameter specifies the first ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size1 Type uSize1 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第287页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the tenth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size10 Type uSize10 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the eleventh MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size11 HSUPA services. Type uSize11 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第288页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the twelfth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size12 HSUPA services. Type uSize12 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the second MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size2 HSUPA services. Type uSize2 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第289页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the third ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size3 Type uSize3 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the fourth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size4 HSUPA services. Type uSize4 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第290页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the fifth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size5 Type uSize5 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the sixth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size6 Type uSize6 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第291页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the seventh MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size7 HSUPA services. Type uSize7 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the eighth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size8 HSUPA services. Type uSize8 (Optional) The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第292页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the ninth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size9 Type uSize9 (Optional) services. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the number of sizes of E-DCH MACd PDUs. D1, D2, The Number ADD Currently, only D3, D4, D5, 1, 2, 3, 4, 5, of E-DCH EdchMacdPd TYPRABHSPA VoIP services can Enumeratio D6, D7, D8, 6, 7, 8, 9, MAC-D PDU uSizeNum (Optional) be configured n Type D9, D10, 10, 11, 12 Size with multiple D11, D12 PDU sizes. Other services can have only one PDU size.

8/7/2013

华为机密,未经许可不得扩散

第293页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4A related to EDCH throughput is reported again after such an event 4A is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4A on E-DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4A on E-DCH.

文档密级:

Period Amount after EdchPending trigger 4A on Time4A EDCH

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第294页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4B related to EDCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on E-DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4B on E-DCH.

文档密级:

Period Amount after EdchPending trigger 4B on Time4B EDCH

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第295页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA EdchRateAdj UpLink Rate ustSet Adjust Set

HSUPA UL rate adjustment set. It SET contains rates for EDCHRATEA Bit Field rate adjustment DJUSTSET(Opt Type and is used in the ional) HSUPA DCCC algorithm.

RATE_8KB PS, RATE_16K BPS, RATE_32K BPS, RATE_64K BPS, RATE_128 KBPS, RATE_144 KBPS, RATE_256 KBPS, RATE_384 KBPS, RATE_608 KBPS, RATE_144 0KBPS, RATE_204 8KBPS, RATE_288 0KBPS, RATE_574 0KBPS

8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740

This parameter specifies the maximum Maximum E- ADD allowed SIR Interval EdchSirMaxD DCH SIR TYPRABOLPC decrease step for Type ownStep decrease step (Mandatory) HSUPA within an adjustment period of outer-loop power control.

0~5000

0~5, step: 0.001

8/7/2013

华为机密,未经许可不得扩散

第296页,共3267页

162734118.xls.ms_office1

文档密级:

The large target Edch Target ADD retransmit times EdchTargetLa Large Number Interval TYPRABOLPC for E-DCH MACrgeRetransNu of E-DCH Type (Mandatory) ES PDU used to m PDU retransfer bear the service.

0~15000

0~15, step:0.001

Edch Little ADD EdchTargetLi Target Number TYPRABOLPC ttleRetransNu of E-DCH (Mandatory) m PDU retransfer

The little target retransmit times for E-DCH MAC- Interval ES PDU used to Type the normal service.

0~15000

0~15, step:0.001

8/7/2013

华为机密,未经许可不得扩散

第297页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the E-DCH rate exceeds the 4A threshold to the moment when the throughputrelated event 4A on E-DCH is triggered. This parameter is used ADD to avoid Interval TYPRABDCC unnecessary Type CMC(Optional) reports triggered by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput exceeding the 4A threshold, and the smaller the possibility of triggering

文档密级:

Period Amount to EdchTimetoT trigger 4A on rigger4A EDCH

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第298页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the E-DCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on E-DCH is triggered. This parameter is set to ADD avoid unnecessary Interval TYPRABDCC reports triggered Type CMC(Optional) by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughput-

文档密级:

Period Amount to EdchTimetoT trigger 4B on rigger4B EDCH

0~1023

0~1023

SET This parameter EdchTtiType Edch TTI type DTXDRXPAR specifies the EA(Mandatory) DCH TTI type.

EDCH_10 EDCH_10 Enumeratio MS, MS,EDCH_ n Type EDCH_2M 2MS S

8/7/2013

华为机密,未经许可不得扩散

第299页,共3267页

162734118.xls.ms_office1

文档密级:

EFACHDL

EFACH ADD EFACH channel Interval channel TRMFACTOR( forward factor. Type forward factor Optional)

0~100

0~100

This parameter specifies the ADD minimum EFACH EFACHDTC CELLEFACH( guaranteed power DTCH GBP HGBP Optional) of the DTCH mapped onto the EFACH. E_FACH support indicator. When ADD the indicator is EFachSupInd EFachSupInd NRNCCELL(M TRUE, it andatory) indicates that the cell supports E_FACH.

Interval Type

-350~150

35~15,step: 0.1

TRUE, Enumeratio FALSE n Type

FALSE,TR UE

8/7/2013

华为机密,未经许可不得扩散

第300页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the RRC connection is established preferentially on the E-FACH. If this parameter is set to ON and both the UE and the serving cell support E-FACH, then the RRC connection is switch for established SET RRC preferentially on EFachSwitch RRCESTCAUS Enumeratio OFF, ON established on the E-FACH, E(Optional) n Type E_FACH regardless of the setting of SigChType. According to the related protocols, the UE cannot transmit signals over the FACH if both the UE and the cell support EFACH. Thus, if this parameter is set to OFF and both the UE and the serving cell

文档密级:

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第301页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the compressed mode can be enabled for the HSPA+ service. When the parameter is set to TRUE, the compressed mode can be enabled for the HSPA+ service. When the parameter is set to FALSE, the CM SET uplink and EHSPACMPe permission ind CMCF(Optional downlink must rmissionInd on HSPA+ ) return to the DCH before the compressed mode is enabled on for the HSPA+ service. This switch is set for compatibility with the HSPA+ terminals that might exist in the network because these terminals do not support the enabled This parameter specifies the type of the end date. DATE indicates that the DST starts from a certain day. SET WEEK indicates EM EndType TZ(Mandatory) that the DST starts from a certain week. DATEWEEK indicates that the DST starts from a certain day in a certain week.

文档密级:

FALSE(For Enumeratio bidden), FALSE,TR n Type TRUE(Per UE mit)

DATE, WEEK, Enumeratio DATEWEE n Type K

DATE, WEEK, DATEWEE K

8/7/2013

华为机密,未经许可不得扩散

第302页,共3267页

162734118.xls.ms_office1
When the switch is enabled, users of emergency call can preempt all the users of non emergency call. Preemptvulner SET When the switch ability for QUEUEPREE is disabled, users Enumeratio OFF, ON Emergency call MPT(Optional) of emergency call n Type switch can only preempt users of non emergency call with the preempted attributes. It indicates whether verification is needed in the case of establishment of a signalling link in a link set. ADD The value ON MTP3LKS(Opti indicates that Enumeratio OFF, ON onal) verification is not n Type needed in an emergency. The value OFF indicates that verification is needed in a common case. This parameter specifies whether the RNC specially handles the LCS requests of emergency calls. SET In other words, SMLC(Optional Enumeratio OFF, ON the RNC provides ) n Type highly accurate location for emergency calls regardless of license constraints.

文档密级:

EmcPreeRef VulnSwitch

OFF, ON

Emergency EMERGENC verification Y

OFF, ON

Emergency EmergLCSSw LCS Switch itch

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第303页,共3267页

162734118.xls.ms_office1

文档密级:

EMONTH

End month

EMSIP

EMS IP Address

Encryption EncryptionAl algorithm go

JAN(Januar y), FEB(Februa ry), MAR(Marc h), APR(April), MAY(May) This parameter , SET specifies the end JUN(June), Enumeratio TZ(Mandatory) month of the JUL(July), n Type DST. AUG(Augu st), SEP(Septe mber), OCT(Octob er), NOV(Nove mber), DEC(Dece mber) This parameter ADD specifies the IP IP Address EMSIP(Mandat address for the Type ory) EMS. The encryption algorithm supported by SET Bit Field UEA0, RNC. Both UEA0 UEA(Optional) Type UEA1 and UEA1 can be selected at one time.

JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC

0.0.0.0~255 .255.255.25 5 For each switch of this parameter, the value can be: ON or OFF.

EndTime1

First Cell Dynamic ShutDown Interval End Time

End time of the ADD first interval when CELLDYNSHU Compound HOUR, the "Cell dynamic TDOWN(Mand Type MIN shutdown" feature atory) is valid.

00:00~23:5 9

EndTime2

Second Cell Dynamic ShutDown Interval End Time

ADD CELLDYNSHU TDOWN(Mand atory)

End time of the second interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.

00:00~23:5 9

8/7/2013

华为机密,未经许可不得扩散

第304页,共3267页

162734118.xls.ms_office1

文档密级:

EndTime3

Third Cell Dynamic ShutDown Interval End Time

ADD CELLDYNSHU TDOWN(Mand atory)

End time of the third interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.

00:00~23:5 9

ENTITYT

Destination entity type

ADD M3DE(Mandato ry) ADD M3LE(Mandato ry)

Err Frmae ERFAMEvent Event Para Para

ACT ETHOAMAH( Optional)

Err Frmae ERFAMEvent Event Prid Prid

ACT ETHOAMAH( Optional)

ACT Err Frmae Cyc ERFAMPRD ETHOAMAH( Event Para EventPara Optional)

ACT Err Frmae Cyc ERFAMPRD ETHOAMAH( Event Prid EventPrid Optional)

ACT Err Frmae Sec ERFAMSCD ETHOAMAH( Event Para EventPara Optional)

M3UA_SG P(M3UA SPG), M3UA_IPS Type of the P(M3UA M3UA Enumeratio IPSP), destination entity. n Type M3UA_SS7 SP(M3UA SS7SP), M3UA_SP( M3UA SP) This parameter specifies the number of Interval 1~1000 detected error Type frames received in error frame events. This parameter specifies the Interval 1~60 period of Type detecting error frame events. This parameter specifies the number of Interval 1~1000 detected error Type frames received in error frame events. This parameter specifies the Interval 1~4294967 period of Type 295 detecting error frame events. This parameter specifies the number of Interval 1~900 detected error Type frames received in error frame events.

M3UA_SG P, M3UA_IPS P, M3UA_SS7 SP, M3UA_SP

1 to 1000

1 to 60

1 to 1000

1 to 4294967295

1 to 900

8/7/2013

华为机密,未经许可不得扩散

第305页,共3267页

162734118.xls.ms_office1
This parameter ACT specifies the Err Frmae Sec Interval ERFAMSCD ETHOAMAH( period of Event Prid Type EventPrid Optional) detecting error frame events. The parameter specifies the number of codes (SF=128) used by the E-DCH Relative Grant Channel (ERGCH)/E-DCH Hybrid ARQ Indicator Channel (E-HICH). The ERGCH is used to adjust the uplink power available for the UE. The ECode Number ADD HICH is used to Interval ErgchEhichC for E-RGCH/E- CELLHSUPA( provide feedback Type odeNum HICH Optional) on the ACK/NACK information, which indicates whether the data that the RNC receives from the E-DCH is correct or not. The ERGCH and EHICH are dedicated channels shared by multiple UEs. They share the AAL2 connection establishment indication timer.This timer Establishment SET is started when an Interval indication AAL2TMR(Opt AAL2 signaling ESTINDTMR Type timer ional) entity sends the service user an indication for establishing an AAL2 connection.

文档密级:

10~900

10 to 900

1~8

1~8

5000~3000 5000~3000 0 0

8/7/2013

华为机密,未经许可不得扩散

第306页,共3267页

162734118.xls.ms_office1
AAL2 connection establishment request timer.This timer is started SET Establishment Interval when an AAL2 ESTREQTM AAL2TMR(Opt request timer signaling entity Type R ional) sends the peer node a request for establishing an AAL2 connection.

文档密级:

5000~3000 5000~3000 0 0

ET

EndTime

This parameter SET Compound HOUR, specifies the end TZ(Mandatory) Type MIN, SEC time of the DST.

HOUR, MIN, SEC

Traffic Measurement Event4aThd Event 4A threshold

D16, D32, D64, D128, This parameter D256, specifies the D512, threshold to D1024, trigger event 4A D2K, D3K, related to DCH D4K, D6K, traffic volume, D8K, that is, the upper ADD D12K, limit of the traffic TYPRABDCC Enumeratio D16K, volume. The CMC(Optional) n Type D24K, larger the value of D32K, this parameter, D48K, the smaller the D64K, possibility of D96K, triggering trafficD128K, related event 4A D192K, on DCH. D256K, D384K,

16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K

8/7/2013

华为机密,未经许可不得扩散

第307页,共3267页

162734118.xls.ms_office1
D8, D16, D32, D64, This parameter D128, specifies the D256, threshold to D512, trigger event 4B D1024, related to DCH D2K, D3K, traffic volume, D4K, D6K, ADD that is, the lower D8K, TYPRABDCC limit of the traffic Enumeratio D12K, CMC(Mandator volume. The n Type D16K, y) smaller the value D24K, of this parameter, D32K, the smaller the D48K, possibility of D64K, triggering trafficD96K, related event 4B D128K, on DCH. D192K, D256K,

文档密级:

Traffic Measurement Event4bThd Event 4B threshold

8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K

This parameter specifies the event A reporting period. It refers to ADD Event A report the delay from the Interval EventAReport TYPRABRLC( delay moment when Type Delay Optional) event A is triggered to the moment when the event is reported.

0~1000

0~100, step: 10

EventAThred

Event A threshold

This parameter specifies the threshold of event ADD A, that is, the Interval TYPRABRLC( upper limit of Type Optional) RLC retransmission ratio.

0~1000

0~100, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第308页,共3267页

162734118.xls.ms_office1

文档密级:

EventBThred

Event B threshold

This parameter specifies the threshold of event ADD B, that is, the Interval TYPRABRLC( lower limit of Type Optional) RLC retransmission ratio.

0~1000

0~100, step: 0.1

EWEEK

End week

SUN(Sunda y), MON(Mon day), TUE(Tuesd This parameter ay), SET specifies the DST Enumeratio WED(Wedn TZ(Mandatory) start day in a n Type esday), week. THU(Thurs day), FRI(Friday) , SAT(Saturd ay)

SUN, MON, TUE, WED, THU, FRI, SAT

8/7/2013

华为机密,未经许可不得扩散

第309页,共3267页

162734118.xls.ms_office1

文档密级:

EWSEQ

End week sequence

FIRST(First ), This parameter SECOND(S SET specifies the DST econd), Enumeratio TZ(Mandatory) end week in a THIRD(Thi n Type month. rd), FOURTH(F ourth), LAST(Last)

FIRST, SECOND, THIRD, FOURTH, LAST

Upper Limit of Signal EX_ANO1_S Output of IG_MAX External Analog 1

Lower Limit of Signal EX_ANO1_S Output of IG_MIN External Analog 1

This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 1(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 1(unit:ampere/vol t). This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 1. Current) This parameter specifies the ADD upper threshold String Type EMU(Optional) for measurement range of external analog 1. This parameter specifies the ADD lower threshold String Type EMU(Optional) for measurement range of external analog 1.

1~9 character

1~9 character

Sensor Type EX_ANO1_T of External YPE Analog 1 Upper Limit of Measurement EX_ANO1_V Range of AL_MAX External Analog 1 Lower Limit of Measurement EX_ANO1_V Range of AL_MIN External Analog 1

VOLTAGE, CURRENT

1~9 character

1~9 character

8/7/2013

华为机密,未经许可不得扩散

第310页,共3267页

162734118.xls.ms_office1
This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 2(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 2(unit:ampere/vol t). This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 2. Current) This parameter specifies the ADD upper threshold String Type EMU(Optional) for measurement range of external analog 2. This parameter specifies the ADD lower threshold String Type EMU(Optional) for measurement range of external analog 2. This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 3(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 3(unit:ampere/vol t).

文档密级:

Upper Limit of Signal EX_ANO2_S Output of IG_MAX External Analog 2

1~9 character

Lower Limit of Signal EX_ANO2_S Output of IG_MIN External Analog 2

1~9 character

Sensor Type EX_ANO2_T of External YPE Analog 2 Upper Limit of Measurement EX_ANO2_V Range of AL_MAX External Analog 2 Lower Limit of Measurement EX_ANO2_V Range of AL_MIN External Analog 2 Upper Limit of Signal EX_ANO3_S Output of IG_MAX External Analog 3

VOLTAGE, CURRENT

1~9 character

1~9 character

1~9 character

Lower Limit of Signal EX_ANO3_S Output of IG_MIN External Analog 3

1~9 character

Sensor Type EX_ANO3_T of External YPE Analog 3

This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), VOLTAGE, EMU(Optional) sensor type of n Type CURRENT( CURRENT external analog 3. Current)

8/7/2013

华为机密,未经许可不得扩散

第311页,共3267页

162734118.xls.ms_office1
Upper Limit of Measurement EX_ANO3_V Range of AL_MAX External Analog 3 Lower Limit of Measurement EX_ANO3_V Range of AL_MIN External Analog 3 Upper Limit of Signal EX_ANO4_S Output of IG_MAX External Analog 4 This parameter specifies the upper threshold for measurement range of external analog 3. This parameter specifies the lower threshold for measurement range of external analog 3. This parameter specifies the upper threshold for signal output of external analog 4(unit:ampere/vol t). This parameter specifies the lower threshold for signal output of external analog 4(unit:ampere/vol t).

文档密级:

ADD EMU(Optional)

String Type -

1~9 character

ADD EMU(Optional)

String Type -

1~9 character

ADD EMU(Optional)

String Type -

1~9 character

Lower Limit of Signal EX_ANO4_S Output of IG_MIN External Analog 4

ADD EMU(Optional)

String Type -

1~9 character

This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 4. Current) Upper Limit This parameter of specifies the Measurement ADD upper threshold EX_ANO4_V String Type EMU(Optional) for measurement Range of AL_MAX External range of external Analog 4 analog 4. Lower Limit This parameter of specifies the Measurement ADD lower threshold EX_ANO4_V String Type EMU(Optional) for measurement Range of AL_MIN External range of external Analog 4 analog 4. Pending time after the traffic D250, volume event 4B D500, SET is reported. This D1000, BE F2P 4B F2PTvmPTA UESTATETRA parameter is used Enumeratio D2000, Pending Time T NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported. Sensor Type EX_ANO4_T of External YPE Analog 4

VOLTAGE, CURRENT

1~9 character

1~9 character

250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第312页,共3267页

162734118.xls.ms_office1
When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is SET D160, reported. This UESTATETRA Enumeratio D200, parameter NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered. ADD Uniquely CTCH(Mandato identifying a ry) FACH in a cell. Interval Type 1~32

文档密级:

BE F2P 4B F2PTvmTime Time ToTrig

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

FachId

FACH ID

1~32

ADD FACH ID for FachIdforMcc CELLMCCH( MCCH h Mandatory)

ID of the transport channel Interval carrying the Type MCCH.

1~32

1~32

Fach Max FachMaxPow Power er

ADD CELLMBMSF ACH(Optional) SET MBMSFACH( Optional) SET MSCHFACH(O ptional)

This parameter specifies the Interval maximum power Type of the FACH.

-350~150

-35~15, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第313页,共3267页

162734118.xls.ms_office1
Indicating whether the FACH measurement occasion period length coefficient should be delivered through the system information. If the inter-freq or interRAT measurement control information is ADD REQUIRE, broadcast through REQUIRE, CELLMEAS(O Enumeratio NOT_REQ the system NOT_REQ ptional) n Type UIRE information, some UIRE UEs in CELL_FACH state need the FACH measurement occasion period length coefficient for measurement. When [Interfreq/Inter-RAT Meas Ctrl Info Ind] is set to NOT_REQUIRE, this parameter is

文档密级:

FACH Meas FACHMeasIn Indicator d

This parameter ADD defines the reduce FACH power Interval FACHPwrRe CELLOLC(Opti value in reducing reduce value Type duceValue onal) FACH power Action. This parameter specifies the factor associated with the SET Interval scheduling SPIFACTOR(M priority indicator. Type andatory) This factor is used to calculate the step of rate upsizing.

0~30

0~3,step:0.1

FACTOR

SPI Factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第314页,共3267页

162734118.xls.ms_office1
This parameter specifies the activity factor. The configured bandwidth of the SET CCP, NCP, CTRLFACTOR ALCAP, or OM (Mandatory) link IPoA PVC multiplied by the activity factor is the bandwidth of the link. This parameter specifies the threshold of allowed times of rate increase consecutive failure within a certain monitoring period. Increase of the BE service rate is triggered SET by the report on DCCC(Optional 4A measurement ) that is performed in the UL and the DL separately. If the times of failure is beyond this threshold, subsequent rate increase is not allowed even if the 4A measurement report is received.

文档密级:

FACTOR

Factor

Interval Type

0~100

0%~100%

FailTimeTh

DCCC Rate Up Fail Time Threshold

Interval Type

1~255

1~255

8/7/2013

华为机密,未经许可不得扩散

第315页,共3267页

162734118.xls.ms_office1

文档密级:

FC

Flow Control

This parameter specifies whether to send and SET receive flow ENABLE, ENABLE, ETHPORT(Opti control frame in Enumeratio DISABLE DISABLE onal) the Ethernet. It n Type indicates whether to enable the flow control.

FCINDEX

Flow control parameter index

ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) SET OPT(Mandatory ) SET ETHPORT(Ma ndatory) ADD MPGRP(Option al) ADD PPPLNK(Optio nal) ADD UNILNK(Optio nal) ADD ATMLOGICPO RT(Optional) ADD PORTFLOWC TRLPARA(Ma ndatory) ADD IPLOGICPORT (Optional)

This parameter specifies the flow Interval control parameter Type index.

0~1999

0 to 1999

8/7/2013

华为机密,未经许可不得扩散

第316页,共3267页

162734118.xls.ms_office1
None(No CRC check), 16bit(16bit CRC check), 32bit(32bit

文档密级:

FCSTYPE

CRC check mode

ADD PPPLNK(Optio This parameter nal) None, specifies the CRC Enumeratio ADD 16bit, 32bit check mode. n Type MPLNK(Option al)

FDD DL FddTpcDlSte power control pSize step size

This parameter specifies the step size of the closedSTEPSIZE_ loop power 0.5DB, control performed STEPSIZE_ on DL DPCH in SET 0.5, 1, 1.5, Enumeratio 1DB, Frequency FRC(Optional) 2 STEPSIZE_ Division Duplex n Type 1.5DB, (FDD) mode. For STEPSIZE_ details of this 2DB parameter, refer to the 3GPP TS 25.214.

ADD CELLSETUP(O F-DPCH ptional) FdpchDivMo diversity mode ADD dforMIMO for MIMO user NRNCCELL(O ptional)

This parameter indicates FDPCH None, Enumeratio diversity mode for STTD n Type MIMO user.

None, STTD

F-DPCH FdpchDivMo diversity mode dforNonMIM for non MIMO O user

ADD CELLSETUP(O ptional) ADD NRNCCELL(O ptional)

This parameter indicates FDPCH None, Enumeratio diversity mode for STTD n Type non MIMO user.

None, STTD

FDPCH maximum FdpchMaxRe reference fPwr power

This parameter specifies the maximum reference power for the F-DPCH. This parameter indicates the SET maximum value Interval FDPCHRLPW of reference FType R(Optional) DPCH TX power, that is, the value of the Maximum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433.

-350~150

-35~15, step:0.1

8/7/2013

华为机密,未经许可不得扩散

第317页,共3267页

162734118.xls.ms_office1
This parameter specifies the minimum reference power for the F-DPCH. This parameter indicates the SET minimum value of FDPCHRLPW reference FR(Optional) DPCH TX power, that is, the value of the Minimum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433. This parameter specifies the power offset of TPC command in SET F-DPCH channel FDPCHPARA( to reference FOptional) DPCH TX power (expressed by the Initial DL Transmission Power IE).

文档密级:

FDPCH minimum FdpchMinRef reference Pwr power

Interval Type

-350~150

-35~15, step:0.1

FdpchPO2

F-DPCH Power Offset

Interval Type

0~24

0~6, step: 0.25

FE Dhcp FEDHCPSV Server IP RIP

This parameter ADD specifies the FE IP Address NODEBESN(M IP address for the Type andatory) DHCP server.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第318页,共3267页

162734118.xls.ms_office1

文档密级:

FILENAME

Export file name

EXP CFGMML(Opti onal) BKP DB(Optional)

This parameter specifies the name used to save the exported file. String Type This name should not contain the directory.

0 to 128 characters

FILEPATH

Export file path

This parameter EXP specifies the path CFGMML(Opti String Type for saving the onal) exported file.

0 to 128 characters

FilterCoef

According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn 1 + a * Mn Here, D0, D1, Fn: the updated D2, D3, D4, filtered Intra-freq SET D5, D6, D7, measurement 0,1,2,3,4,5,6 meas L3 filter INTRAFREQH Enumeratio D8, D9, result ,7,8,9,11,13, coeff O(Optional) n Type D11, D13, Fn - 1: the old 15,17,19 D15, D17, filtered D19 measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied.

8/7/2013

华为机密,未经许可不得扩散

第319页,共3267页

162734118.xls.ms_office1
L3 filtering coefficient for event 2D or event 2F measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this Enumeratio parameter is set n Type too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the interfrequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis,

文档密级:

2D2F filter FilterCoefOf2 coeff D2F

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

D0, D1, D2, D3, D4, D5, D6, D7, 0,1,2,3,4,5,6 D8, D9, ,7,8,9,11,13, D11, D13, 15,17,19 D15, D17, D19

FixedMachs WinSize

This parameter specifies the fixed MAC-hs window D4, D6, ADD size. It is valid Fixed MACD8, D12, NODEBLMTP when the [Is Enumeratio hs window size D16, D24, ARA(Optional) MAC-hs window n Type D32 size fixed or not] parameter is set to TRUE.

4, 6, 8, 12, 16, 24, 32

8/7/2013

华为机密,未经许可不得扩散

第320页,共3267页

162734118.xls.ms_office1
Switch of the FLC algorithm. The FLC is a mandatory algorithm used in the multifrequency network to ADD OFF(OFF), guarantee that CELLMCCH(O Enumeratio OFF, ON ON(ON) UEs camping on ptional) n Type other frequencies can reselect the current frequency to receive the MBMS service. Therefore, the switch is on by default.

文档密级:

Flc Algo FlcAlgoSwitc Switch h

Flow control FLOWCTRL switch SWITCH

ADD FRALNK(Optio nal) SET OPT(Optional) ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) ADD IPLOGICPORT (Optional) ADD MPGRP(Option al) ADD UNILNK(Optio nal) ADD ATMLOGICPO RT(Optional) SET ETHPORT(Opti onal)

This parameter specifies whether the switch of flow Enumeratio OFF, ON control on the link n Type is turned on.

OFF, ON

FLOWID

Flow ID

ADD This parameter Interval FLOW(Mandat specifies the flow Type ory) ID.

0~299

0~299

8/7/2013

华为机密,未经许可不得扩散

第321页,共3267页

162734118.xls.ms_office1
This parameter specifies the file name. The license file must be saved ACT in \FTP\License. LICENSE(Opti If the file name is String Type onal) not specified, the latest license file in \FTP\License is activated through this command.

文档密级:

FN

File Name

0 to 100 characters

FN

File Name

EXP This parameter ELABEL(Optio specifies the file nal) name.

String Type -

1~128 characters

When the CELLID+RTT method is selected, this parameter specifies whether forced soft handover is performed if the ForcedSho SET number of RTT Switch In ForcedSHOS SMLC(Optional measured result is Enumeratio OFF, ON CELLID+RTT witch ) n Type smaller than 3. Method After soft handover is complete, accuracy of the CELLID+RTT method is enhanced when the RNC obtains more radio links.

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第322页,共3267页

162734118.xls.ms_office1

文档密级:

FPMUXSWI TCH

FPMUX flag

Indicating whether to check the link of the IP ADD path with IPPATH(Option Enumeratio NO, YES FPMUX. Only al) n Type FG2a and GOUa board support FPMUX.

NO, YES

FPTIMER

FPTIMER

ADD The maximal IPPATH(Option time for FP al) MUX[ms].

Interval Type

1~10

1~10

FRAGSIZE

ADD This parameter Interval MP flake size MPGRP(Option specifies the MP Type al) flake size.

128~1024

128 to 1024

FRALNKN

This parameter ADD specifies the Fractional link FRALNK(Mand number of a No. atory) fractional ATM/IMA link.

Interval Type

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第323页,共3267页

162734118.xls.ms_office1

文档密级:

FRALNKT

This parameter ADD Fractional link specifies the type FRAATM, FRAATM, FRALNK(Mand Enumeratio type of a fractional FRAIMA FRAIMA atory) n Type link.

FRMLEN

TX frame length

The longer a TX frame is, the higher the ADD D32, D64, transmission IMAGRP(Optio Enumeratio D32,D64,D D128, D256 efficiency is but nal) n Type 128,D256 the less the sensitivity against error is.

FTI

Factor table index

Index of the ADD factor table used ADJMAP(Man by the current datory) adjacent node.

Interval Type

0~33

0~33

8/7/2013

华为机密,未经许可不得扩散

第324页,共3267页

162734118.xls.ms_office1

文档密级:

FTI

Factor table index

ADD Factor table TRMFACTOR( index. Mandatory)

Interval Type

1~33

1~33

Function FUNCTIONS Switch1 WITCH1

ACT Function switch LICENSE(Opti 1. onal)

Bit Field Type

PDCP(PDC P header compress), AMRC(AM R voice coding rate control), TFOTRFO( TFO/TrFO), INDIRECR ETRY(Intra system direct retry), INTERRAT DIRECRET RY(Inter system direct retry), INTERRAT REDIRECT (Inter system redirect), CBS(Cell broadcast service), CELLID(C ELL ID LCS), OTDOA(O TDOA

PDCP,AM RC,TFOTR FO,INDIRE CRETRY,I NTERRAT DIRECRET RY,INTER RATREDIR ECT,CBS,C ELLID,OT DOA,AGPS ,PUC,INTR ACELLLD B,INTERC ELLLDB,M ULTIRAB, HCS,RABD OWNSIZIN G,QCPE,IN TERSERVI CEHO,INT ERLOADH O,IUQOSR ENEG,LCS CZ,HSDPA ,IUFLEX,I UBSC,IUBI P,MBMS

8/7/2013

华为机密,未经许可不得扩散

第325页,共3267页

162734118.xls.ms_office1

文档密级:

Function FUNCTIONS Switch2 WITCH2

ACT Function switch LICENSE(Opti 2. onal)

Bit Field Type

WBAMR( Wide band AMR), HSUPA(HS UPA), RANSHAR E(RAN sharing), HSDPA3.6 M(HSDP3. 6M), HSDPA7.2 M(HSDPA7 .2M), ROHC(PD CP ROHC Function), IURLC(LC S over Iur), NACC(Net work Assisted Cell Change), PSHBUG(P S Handover Between UMTS and GPRS), IMSIBH(I MSI Based

WBAMR,H SUPA,RAN SHARE,HS DPA3.6M, HSDPA7.2 M,ROHC,I URLC,NA CC,PSHBU G,IMSIBH, 32HSDPAU PERCELL, 64HSDPAU PERCELL, STMTRAO NHSDPA,H SDPASTA TETRAN,H SDPADRD, ENHANCE DIUFLEX, STMTRAO NHSUPA,A TMIPDUA LSTACK,IP TRANINIU R,IPTRANI NIU,FRAC TIONALIP, IPIUBOVE RBOOKIN G,FRACTI

8/7/2013

华为机密,未经许可不得扩散

第326页,共3267页

162734118.xls.ms_office1

文档密级:

Function FUNCTIONS Switch3 WITCH3

ACT Function switch LICENSE(Opti 3. onal)

Bit Field Type

SRNSRWC UPDATE(S RNS Relocation with Cell/URA Update), LOSSLESS SRNSREL CT(Lossless SRNS Relocation), INTERFRE QHARDHN DV(Inter frequency hard handover), IMPRVED WNLNKC VRGE(Impr oved Downlink Coverage), ACRWHE NSPUOVE R(Access Class Restriction when SPU overload),

SRNSRWC UPDATE,L OSSLESSS RNSRELC T,INTERF REQHARD HNDV,IMP RVEDWNL NKCVRGE ,ACRWHE NSPUOVE R,CBWHE NIUIFAUL T,3G2GCO MMON_L OAD,FP_M UX,HSDPA _OVER_IU R,HS_DPC CH_PREA MBLE_SU PPORT,HS UPA_5_74 MBPS,HSU PA_OVER_ IUR,HUB_I UB_OVER BOOKING, IMS_SIGN ALING_O VER_HSP

8/7/2013

华为机密,未经许可不得扩散

第327页,共3267页

162734118.xls.ms_office1

文档密级:

Function FUNCTIONS Switch4 WITCH4

ACT Function switch LICENSE(Opti 4. onal)

Bit Field Type

DYNAMIC _POWER_ ESTIMATI ON_FOR_ MTCH(Dyn amic Power Estimation for MTCH), ONE_TUN NEL(One Tunnel), MULCAR_ SWOFF_B ASEDON_ TRALOAD (Multicarrier switch off based on traffic load), CS_OVER_ HSPA(CS voice over HSPA), VOIP_OVE R_HSPA(V oIP over HSPA Introduction Pakage), 96_HSDPA

DYNAMIC _POWER_ ESTIMATI ON_FOR_ MTCH,ON E_TUNNE L,MULCA R_SWOFF_ BASEDON _TRALOA D,CS_OVE R_HSPA,V OIP_OVER _HSPA,96_ HSDPA_U SERS_PER _CELL,HS PA_DOWN 28_PER_U SER,HSPA _DOWN21 _PER_USE R,96_HSUP A_USERS_ PER_CELL ,MSCH_SC HEDULIN G,MBMS_ CHANNEL, ENHANCE D_CELL_F

8/7/2013

华为机密,未经许可不得扩散

第328页,共3267页

162734118.xls.ms_office1

文档密级:

Forward FWDCONGB congestion W threshold

ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal) ADD IPLOGICPORT (Optional)

When the remaining transmit bandwidth is smaller than or Interval equal to this Type parameter value, the forward congestion alarm is triggered.

0~1000000

0 to 1000000

Forward FWDCONGB congestion W threshold

This parameter specifies the remaining ADD bandwidth Interval ATMLOGICPO threshold for Type RT(Optional) generating the forward congestion alarm.

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第329页,共3267页

162734118.xls.ms_office1

文档密级:

Forward FWDCONGB congestion W threshold

If the available forward bandwidth is less ADD than or equal to Interval AAL2PATH(O this value, the Type ptional) forward congestion alarm is emitted.

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第330页,共3267页

162734118.xls.ms_office1

文档密级:

Forward FWDCONGB congestion W threshold

If the available forward bandwidth is less ADD than or equal to Interval IPPATH(Option this value, the Type al) forward congestion alarm is emitted.

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第331页,共3267页

162734118.xls.ms_office1

文档密级:

Forward FWDCONGB congestion W threshold

If the available forward bandwidth is less ADD than or equal to Interval RSCGRP(Optio this value, the Type nal) forward congestion alarm is emitted.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第332页,共3267页

162734118.xls.ms_office1

文档密级:

ADD PPPLNK(Optio nal) ADD MPGRP(Option al) Forward ADD FWDCONGC congestion FRALNK(Optio LRBW clear threshold nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal)

When the remaining transmit bandwidth is Interval greater than this Type parameter value, the forward congestion alarm is cleared.

0~1000000

0 to 1000000

8/7/2013

华为机密,未经许可不得扩散

第333页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the forward congestion clear threshold. When Forward ADD the remaining Interval FWDCONGC congestion IPLOGICPORT bandwidth Type LRBW clear threshold (Optional) reaches this parameter value, the forward congestion alarm is cleared.

0~200000

0~200000

This parameter specifies the remaining Forward ADD bandwidth FWDCONGC congestion ATMLOGICPO threshold for LRBW clear threshold RT(Optional) clearing the forward congestion.

Interval Type

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第334页,共3267页

162734118.xls.ms_office1

文档密级:

If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion AAL2PATH(O greater than this Type LRBW clear threshold ptional) value, the forward congestion alarm is cleared.

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第335页,共3267页

162734118.xls.ms_office1

文档密级:

If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion IPPATH(Option greater than this Type LRBW clear threshold al) value, the forward congestion alarm is cleared.

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第336页,共3267页

162734118.xls.ms_office1

文档密级:

If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion RSCGRP(Optio greater than this Type LRBW clear threshold nal) value, the forward congestion alarm is cleared.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第337页,共3267页

162734118.xls.ms_office1

文档密级:

Forward handover FWDHORSV reserved BW bandwidth

ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal) ADD IPLOGICPORT (Optional)

This parameter specifies the transmit Interval bandwidth Type reserved for the user in handover.

0~1000000

0 to 1000000

Forward handover FWDHORSV reserved BW bandwidth

This parameter ADD specifies the Interval ATMLOGICPO bandwidth Type RT(Optional) reserved for the forward handover.

0~149000

AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000

8/7/2013

华为机密,未经许可不得扩散

第338页,共3267页

162734118.xls.ms_office1

文档密级:

Forward handover FWDHORSV reserved BW bandwidth

Reserved ADD forward AAL2PATH(O bandwidth for ptional) handover user.

Interval Type

0~320000

0~320000

8/7/2013

华为机密,未经许可不得扩散

第339页,共3267页

162734118.xls.ms_office1

文档密级:

Forward handover FWDHORSV reserved BW bandwidth

Reserved ADD forward IPPATH(Option bandwidth for al) handover user.

Interval Type

0~3000000 0~3000000

8/7/2013

华为机密,未经许可不得扩散

第340页,共3267页

162734118.xls.ms_office1

文档密级:

Forward handover FWDHORSV reserved BW bandwidth

Reserved ADD forward RSCGRP(Optio bandwidth for nal) handover user.

Interval Type

0~4000000 0~4000000

Gain Factor GainFactorBe BetaC taC

The power occupancy factor of the control ADD part. For detailed Interval PRACHTFC(M information of Type andatory) this parameter, refer to 3GPP TS 25.214.

1~15

1~15

Gain Factor GainFactorBe BetaD taD

The power occupancy factor of the data part. ADD For detailed Interval PRACHTFC(O information of Type ptional) this parameter, refer to 3GPP TS 25.214.

0~15

0~15

8/7/2013

华为机密,未经许可不得扩散

第341页,共3267页

162734118.xls.ms_office1

文档密级:

Check IP GATEWAY address

This parameter STR specifies the IP IPCHK(Mandat address for the ory) check.

IP Address Type

0.0.0.0~255 .255.255.25 5

GCDF

DEG(Degre GeoADD Geo-coordinate e), coordinate data SMLCCELL(O data format, DEG Enumeratio 0~1 SEC(Degre format ptional) or SEC. n Type e Minute and Second)

GCDF

GCDF

ADD GPS(Optional)

This parameter specifies the geographical coordinate data format (GCDF), Enumeratio DEG(DEG), DEG, SEC either in degrees n Type SEC(SEC) or in the form of degree:minute:sec ond.

8/7/2013

华为机密,未经许可不得扩散

第342页,共3267页

162734118.xls.ms_office1

文档密级:

General common ADD General common Interval GENCCHDL channel service TRMFACTOR( channel service Type downlink Optional) downlink factor. factor

0~100

0~100

General ADD General common common Interval GENCCHUL TRMFACTOR( channel service channel service Type Optional) uplink factor. uplink factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第343页,共3267页

162734118.xls.ms_office1

文档密级:

WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ GoldMaxMod AMR speech Enumeratio AMRC For SET BITRATE_ e service for gold n Type Golden Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K

6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85

8/7/2013

华为机密,未经许可不得扩散

第344页,共3267页

162734118.xls.ms_office1

文档密级:

NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) GoldMaxMod AMR speech Enumeratio 70K, AMRC For SET e service for gold n Type NBAMR_B Golden Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K

4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20

8/7/2013

华为机密,未经许可不得扩散

第345页,共3267页

162734118.xls.ms_office1

文档密级:

Indicates whether gold users involve in the switch of congestion control. According to the policy set for gold users by operators, if service quality of gold users should be guaranteed even in resource congestion, the ADD switch should be GoldUserLoa Gold user load OFF(OFF), CELLLDR(Opti disabled. If the Enumeratio OFF, ON dControlSwit control switch ON(ON) onal) switch is enabled, n Type ch LDR such as rate reduction and handover also occurs on gold users even in cell resource congestion, which impacts user service quality. If the switch is disabled, no action is performed on gold users. This parameter specifies the Interval period of Type reporting the GPS data.

GPSPERIOD

GPS data report period

ADD GPS(Optional)

1~60

1 to 60

GRPID

Transport Resource Group No.

ADD Number of the Interval RSCGRP(Mand transport resource Type atory) group.

0~119

0~119

GRPT

Transport Resource Group Type

Type of the ADD transport resource RSCGRP(Mand group. Type of Enumeratio ATM, IP atory) the transport n Type resource group.

ATM, IP

8/7/2013

华为机密,未经许可不得扩散

第346页,共3267页

162734118.xls.ms_office1

文档密级:

GSM cell GSMCellInde index x

ADD GSMCELL(Ma ndatory) Uniquely HO identifying a CELL(Optional) GSM cell. ADD GSMNCELL(M andatory)

Interval Type

0~65535

0~65535

GSMCellNa me

GSM cell name

A name ADD identifying a GSMCELL(Ma GSM cell ndatory) uniquely.

String Type -

1~31 characters

When event 5A is triggered, a pending timer is started, during which event 5A will not be ADD reported before Interval Block TYPRABQUA HangBlockN the specified Number LITYMEAS(M um5A number is andatory) reached. This parameter can control the frequency for reporting event 5A.

Interval Type

1~512

1~512

8/7/2013

华为机密,未经许可不得扩散

第347页,共3267页

162734118.xls.ms_office1

文档密级:

HappyBR

This parameter specifies the Happy bit rate of the best-effort (BE) service with different user priorities. The Happy bit rate is the private information element on the Iub interface and SET it is used for the Interval Happy bit rate USERHAPPYB flow control by Type R(Optional) the NodeB. When resource is limited,the user rate reach the Happy bit rate,the user's scheduling priority will be reduced.When Happy bit rate is set to 0,the Happy bit rate function is closed.

0~5000

0~5000

HARQ Preamble HarqPreaCap capability indication

This parameter indicates whether the cell of the neighboring RNC supports the HARQ Preamble ADD Mode0, capability. Mode1 NRNCCELL(O Enumeratio Mode1 means the cell ptional) n Type supports the HARQ Preamble capability, whereas Mode0 means not supporting it.

Mode0,Mod e1

8/7/2013

华为机密,未经许可不得扩散

第348页,共3267页

162734118.xls.ms_office1

文档密级:

Happy bit HBDelaycnd delay time

This parameter specifies the time used for decision of HSUPA happy D2, D10, bit. The decision D20, D50, ADD is based on D100, TYPRABHSPA whether all the Enumeratio D200, (Optional) buffered user data n Type D500, can be transmitted D1000 at the current rate during the time specified by this parameter.

2, 10, 20, 50, 100, 200, 500, 1000

HBINTER

Heartbeat interval

It can be used to ADD calculate the Interval SCTPLNK(Opti heartbeat interval Type onal) of the idle SCTP server.

1000~6000 1000~6000 00 00

HCARRYT

High bearing type

This parameter specifies the type of link that carries the high-end ADD UNI, IMA, UNI, IMA, VPL/VCL cross VPCLCX(Mand Enumeratio FRAATM, FRAATM, connection. atory) n Type NCOPT NCOPT GUI value range: UNI, IMA, FRAATM, NCOPT.

This parameter is Punish Timer used for setting ADD HCodeAdjPu Length for the punish timer Interval CELLHSDPA( nshTimerLen Code Adjust length for Type Optional) gth for HSDPA adjusting hsdpa code again.

0~300

0~300

8/7/2013

华为机密,未经许可不得扩散

第349页,共3267页

162734118.xls.ms_office1

文档密级:

HCSPrio

HCS priority level

ADD CELLHCS(Opti onal) ADD GSMCELL(Opt ional) ADD NRNCCELL(O ptional)

HCS priority of the cell belongs to. The parameter Interval depends on HCS Type rules. For details, refer to 3GPP TS 25.304.

0~7

0~7

HSDPA background HDBKGDL service downlink factor

HSDPA ADD background Interval TRMFACTOR( service downlink Type Optional) factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第350页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA HDBKGPRIP background ATH primary path

ADD HSDPA TRMMAP(Opti background onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSDPA HSDPA ADD background background pri HDBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第351页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA ADD HSDPA HDBKGSEC background TRMMAP(Opti background PATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA ADD background pri HDBKGSEC LOADEQ(Opti sec path load WHT onal) ratio threshold

HSDPA background primary secondary path load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第352页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA HSDPA conversational ADD conversational Interval service TRMFACTOR( HDCONVDL service downlink Type downlink Optional) factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第353页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSDPA ADD HSDPA HDCONVPR conversational TRMMAP(Opti conversational IPATH primary path onal) primary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSDPA HSDPA ADD conversational conversational HDCONVPR LOADEQ(Opti bearing primary pri path load ITH onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第354页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA ADD HSDPA HDCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA HSDPA conversational conversational ADD primary HDCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.

Interval Type

0~100

0~100

HSDPA high HDHIGHINT interactive pri ERACTPRIT path load H threshold

HSDPA high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第355页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA high HDHIGHINT pri sec path ERACTSEC load ratio WHT threshold

HSDPA high priority ADD interactive LOADEQ(Opti primary onal) secondary path load ratio threshold.

Interval Type

0~100

0~100

HSDPA interactive service HDINTERDL downlink factor

ADD HSDPA Interval TRMFACTOR( interactive service Type Optional) downlink factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第356页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA high ADD HSDPA high HDINTHGH PRI interactive TRMMAP(Opti PRI interactive PRIPATH primary path onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第357页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA high ADD HSDPA high HDINTHGH PRI interactive TRMMAP(Opti PRI interactive SECPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第358页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSDPA low ADD HSDPA low PRI AF42, HDINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, PRIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第359页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSDPA low ADD HSDPA low PRI AF42, HDINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, SECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第360页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA middle PRI HDINTMIDP interactive RIPATH primary path

ADD HSDPA middle TRMMAP(Opti PRI interactive onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第361页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA ADD HSDPA middle middle PRI HDINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA low HDLOWINT interactive pri ERACTPRIT path load H threshold

HSDPA low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

HSDPA low priority HSDPA low ADD interactive HDLOWINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第362页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA mid interactive pri HDMIDINTE path load RACTPRITH threshold

HSDPA middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

HSDPA middle priority HSDPA mid ADD interactive HDMIDINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

HDSIPDL

HSDPA IMS ADD signal HSDPA IMS TRMFACTOR( downlink downlink factor. Optional) factor

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第363页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSDPA IMS ADD HSDPA Signal HDSIPPRIPA Signal primary TRMMAP(Opti primary path. TH path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HDSIPPRIT H

HSDPA IMS HSDPA IMS ADD Signal bearing Interval Signal pri path LOADEQ(Opti primary path load Type load threshold onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第364页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA IMS ADD HSDPA Signal HDSIPSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA IMS HSDPA IMS ADD Signal primary Signal pri sec HDSIPSECW LOADEQ(Opti secondary path path load ratio HT onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第365页,共3267页

162734118.xls.ms_office1

文档密级:

HDSRBDL

HSDPA signal ADD HSDPA SRB downlink TRMFACTOR( downlink factor. factor Optional)

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第366页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSDPA ADD HSDPA Signal HDSRBPRIP Signal primary TRMMAP(Opti primary path. ATH path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSDPA Signal HSDPA ADD bearing primary HDSRBPRIT Signal pri path LOADEQ(Opti path load H load threshold onal) threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第367页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA ADD HSDPA Signal HDSRBSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA Signal HSDPA ADD primary Signal pri sec HDSRBSEC LOADEQ(Opti secondary path path load ratio WHT onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第368页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA streaming HDSTRMDL service downlink factor

ADD HSDPA Interval TRMFACTOR( streaming service Type Optional) downlink factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第369页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD HSDPA AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSDPA HDSTRMPRI streaming PATH primary path

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSDPA streaming pri HDSTRMPRI path load TH threshold

HSDPA ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第370页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSDPA ADD HSDPA HDSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSDPA HSDPA ADD streaming primary streaming pri Interval HDSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第371页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA voice ADD HSDPA voice service Interval HDVOICED TRMFACTOR( service downlink downlink Type L Optional) factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第372页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

ADD HSDPA Voice HSDPA Voice HDVOICEPR TRMMAP(Opti primary path primary path. IPATH onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第373页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

ADD HSDPA Voice HSDPA Voice HDVOICESE TRMMAP(Opti secondary path secondary path. CPATH onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

This parameter specifies the number of the Fractional link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For High ADD the AOUa in E1 Interval HFRAATML FRAATM link VPCLCX(Optio transmission Type NKN No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured.

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第374页,共3267页

162734118.xls.ms_office1
32-bit unsigned integer. 1) DL_DCCH_SWI TCH. When it is checked, SRNC will include the IE "RB Id for handover message" in the IE "SRNS Relocation Info", the target RNC should choose the IE "DL DCCH Relocation ADD message" and HhoRelocPro with HHO NRNC(Optional include the DL cSwitch process switch ) DCCH message that should be transmitted transparently to the UE by the source RNC. In that case, the target RNC is integrity protecting the message if applicable. 2) IUR_TRG_SWIT CH. When it is Indicating whether to trigger ADD hard handover HHO cross HHOTRIG NRNC(Mandat cross the Iur IUR trigger ory) interface between the RNC and the neighboring This parameter specifies the number of the IMA group corresponding to the high-end port. ADD For the AEUa, the High IMA HIMAGRPN VPCLCX(Optio number ranges group No. nal) from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured.

文档密级:

Bit Field Type

DL_DCCH _SWITCH, IUR_TRG_ SWITCH

DL_DCCH _SWITCH, IUR_TRG_ SWITCH

Enumeratio OFF, ON n Type

OFF,ON

Interval Type

0~83

0 to 83

8/7/2013

华为机密,未经许可不得扩散

第375页,共3267页

162734118.xls.ms_office1

文档密级:

HoAsuTmr

A timer to RNC wait for the HO active set SET response to active Interval update STATETIMER( set update in soft Type response timer Optional) handover procedure.

1~10000

1~10000

A timer to RNC wait for the response to the HO cell SET Interval cell update HoCellUpdat update STATETIMER( confirm from UE Type eRspTmr response timer Optional) in forward handover procedure. Priority of coverage-based inter-frequency handover. "0" means that the The priority of ADD coverage-based coverage based Interval INTERFREQN inter-frequency inter-frequency Type CELL(Optional) handover is not handover supported. "1" means the highest priority. "3" means the lowest priority.

1~10000

1~10000

HOCovPrio

0~3

0~3

A timer to RNC SET wait for paging HO paging Interval HoPagingRsp STATETIMER( response in response timer Type Tmr Optional) forward handover procedure. A timer to RNC wait for the HO PhyCh SET response to Interval HoPhychRecf reconfiguration STATETIMER( physical channel Type gTmr timer Optional) reconfiguration in hard handover procedure. A timer to RNC SET wait for relocation HO relocation Interval HoRelocReq STATETIMER( request in forward request timer Type Tmr Optional) handover procedure.

1~10000

1~10000

1~10000

1~10000

1~10000

1~10000

8/7/2013

华为机密,未经许可不得扩散

第376页,共3267页

162734118.xls.ms_office1
This parameter specifies the NodeB host type in RNC Node Redundancy function. If the parameter value is SINGLEHOST, the physical NodeB is managed only by SINGLEHO one RNC. If the ST(SingleH ADD parameter value is ost), SingleHost, NODEB(Option PRIMHOST or Enumeratio PRIMHOS PrimHost, al) SECHOST, the n Type T(PrimHost SecHost physical NodeB ), can be managed SECHOST( by two RNCs. SecHost) By default, the NodeB is managed by the host RNC. When the host RNC fails, the physical NodeB is managed by the secondary RNC.

文档密级:

HostType

NodeB Host Type

8/7/2013

华为机密,未经许可不得扩散

第377页,共3267页

162734118.xls.ms_office1
HandOver switch. 1) HO_ALGO_HCS _SPEED_EST_S WITCH: When the switch is on, the RNC evaluates the UE's moving speed in the HCS and initiates fast intra-layer or slow inter-layer SET handover. CORRMALGO 2) Bit Field SWITCH(Optio HO_ALGO_LDR Type nal) _ALLOW_SHO_ SWITCH: When the switch is on, the LDR interfrequency handover is allowed during soft handover. 3) HO_ALGO_MB MS_FLC_SWIT CH: When the switch is on, the UE requires that the redirection

文档密级:

HoSwitch

HandOver switch

HO_ALGO _HCS_SPE ED_EST_S WITCH, HO_ALGO _LDR_ALL OW_SHO_ SWITCH, HO_ALGO _MBMS_F LC_SWITC H, HO_ALGO _OVERLA Y_SWITC H, HO_INTER _FREQ_HA RD_HO_S WITCH, HO_INTER _FREQ_RP RT_2D2F_ SWITCH, HO_INTER _RAT_CS_ OUT_SWIT CH, HO_INTER _RAT_PS_ 3G2G_CEL

HO_ALGO _HCS_SPE ED_EST_S WITCH, HO_ALGO _LDR_ALL OW_SHO_ SWITCH, HO_ALGO _MBMS_F LC_SWITC H, HO_ALGO _OVERLA Y_SWITC H, HO_INTER _FREQ_HA RD_HO_S WITCH, HO_INTER _FREQ_RP RT_2D2F_ SWITCH, HO_INTER _RAT_CS_ OUT_SWIT CH, HO_INTER _RAT_PS_ 3G2G_CEL

8/7/2013

华为机密,未经许可不得扩散

第378页,共3267页

162734118.xls.ms_office1
Threshold of signal quality of the target frequency for triggering interfrequency(Ec/No) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered. Threshold of signal quality of the target frequency for triggering interfrequency(RSCP) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered.

文档密级:

Inter-freq measure target HOThdEcN0 frequency trigger Ec/No THD

ADD CELLMBDRIN TERFREQ(Opti onal)

Interval Type

-24~0

-24~0

Inter-freq measure target HOThdRscp frequency trigger RSCP THD

ADD CELLMBDRIN TERFREQ(Opti onal)

Interval Type

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第379页,共3267页

162734118.xls.ms_office1
A timer to RNC wait for the response to the HO wait timer TrCH for TrCH or SET reconfiguration or Interval HoWtTrchRe RB STATETIMER( Type RB cfgRspTmr reconfiguration Optional) reconfiguration response response from UE in hard handover procedure.

文档密级:

1~10000

1~10000

HPN

This parameter specifies the ADD High NCOPT number of the Interval VPCLCX(Optio port No. optical port Type nal) corresponding to the high-end port.

0~3

0 to 3

AF of hsdpa HsdpaBackGr background oundAF service

DL activity SET factor of the ADMCTRL(Op HSUPA tional) background service.

Interval Type

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第380页,共3267页

162734118.xls.ms_office1
Average throughput admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSDPA BE users is lower than the average throughput admission threshold of the HSDPA BE ADD service multiplied Interval CELLCAC(Opti by the sum of Type onal) GBR of all the accessed HSDPA BE users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA BE services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA BE

文档密级:

HSDPA best HsdpaBePBR effort PBR Thd threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第381页,共3267页

162734118.xls.ms_office1
This parameter determines whether the compressed mode (CM) is permitted for the UE when the HSDPA services exist. If the parameter value is set to TRUE, compressed mode is permitted on HSDPA, and HSDPA services CM SET FALSE(For can be set up HsdpaCMPer permission ind CMCF(Optional Enumeratio bidden), FALSE,TR when the missionInd on HSDPA ) n Type TRUE(Per UE compressed mode mit) is activated. If the parameter value is set to FALSE, channel switch on H2D (from HSDSCH to DCH) should be performed before compressed mode is started, and no HSDPA services should exist when compressed mode is activated.

文档密级:

AF of hsdpa HsdpaConvA conv service F

DL activity SET factor of the ADMCTRL(Op HSUPA tional) conversational service.

Interval Type

0~100

0~1, step: 0.01

AF of hsdpa HsdpaInteract interactive AF service

DL activity SET factor of the ADMCTRL(Op HSUPA tional) interactive service.

Interval Type

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第382页,共3267页

162734118.xls.ms_office1

文档密级:

SET LDM(Optional) HSDPA need HsdpaNeedP SET power filter len wrFilterLen SATLDM(Opti onal)

Length of smoothing filter window of HSDPA power requirement.

Interval Type

1~32

1~32

HsdpaPrvidBi HSDPA bit tRateFilterLe rate filter len n

SET LDM(Optional) SET SATLDM(Opti onal)

Length of smoothing filter window of HSDPA bit rate.

Interval Type

1~32

1~32

The minimum number of HSDPA RAB establish request per SPU to report KPI alarm. In a checking period,if the number of Minimum HSDPA RAB Number of SET establish request HsdpaRabEst HSDPA RAB KPIALMTHD( is higher than the AttMinNum Establish Optional) threshold and the Request HSDPA RAB setup successful ratio is lower than this threshold,the KPI alarm of HSDPA RAB setup ratio is reported. Threshold of HSDPA RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio Threshold of is lower than this HSDPA RAB SET threshold and the HsdpaRabEst Setup KPIALMTHD( number of SuccRatioThd Successful Optional) HSDPA RAB Ratio establish request is higher than the related threshold,the KPI alarm of HSDPA RAB setup ratio is reported.

Interval Type

0~65534

0~65534

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第383页,共3267页

162734118.xls.ms_office1

文档密级:

AF of hsdpa HsdpaStream streaming AF service

DL activity SET factor of the Interval ADMCTRL(Op HSUPA Type tional) streaming service.

0~100

0~1, step: 0.01

Average throughput admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed streaming users is lower than the average throughput admission threshold of the HSDPA HSDPA ADD streaming service HsdpaStrmPB streaming PBR CELLCAC(Opti multiplied by the RThd threshold onal) sum of GBR of all the accessed streaming users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA streaming services are not allowed. Otherwise, the QoS can be satisfied and new The total HSDPA Max ACT throughput of all HSDPAthrou throughput of LICENSE(Opti the operators ghput HSDPA onal) cannot exceed that defined in the license file.

Interval Type

0~100

0~1, step:0.01

Interval Type

0~3910000

0 to 3910000

8/7/2013

华为机密,未经许可不得扩散

第384页,共3267页

162734118.xls.ms_office1

文档密级:

The cell will shut down Cell Dynamic ADD automatically ShutDown CELLDYNSHU only when the Interval HsdpaUserNu Hsdpa User TDOWN(Optio HSDPA user Type mThd number nal) number is not Threshold greater than the threshold.

0~5

0~5

This parameter specifies the first MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize1 size1 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第385页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the second MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize2 size2 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the third MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize3 size3 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第386页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the fourth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize4 size4 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the fifth MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize5 size5 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第387页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the sixth MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize6 size6 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the seventh MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize7 size7 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第388页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the eighth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize8 size8 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.

1~5000

1~5000

This parameter specifies the number of sizes of HS-DSCH MAC-d PDUs. The Number ADD Currently, only D1, D2, of HS-DSCH 1, 2, 3, 4, 5, HsdschMacd TYPRABHSPA VoIP services can Enumeratio D3, D4, D5, MAC-D PDU 6, 7, 8 PduSizeNum (Optional) be configured n Type D6, D7, D8 Size with multiple PDU sizes. Other services can have only one PDU size.

HSN

This parameter specifies the ADD number of the slot Interval High slot No. VPCLCX(Mand in which the highType atory) end port carries the VPL/VCL cross connection.

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第389页,共3267页

162734118.xls.ms_office1
If the HspaEnhSwitch is enabled, it indicates that the enhanced FDPCH function is ADD supported in the Cell Hspa E_F_DPCH CELLALGOS cell. E_F_DPCH HspaEnhSwit Enhanced Enumeratio _OFF, WITCH(Option Note: The actual _OFF,E_F_ ch function switch n Type E_F_DPCH al) use of this DPCH_ON _ON function is also restricted by the license and the physical capability of the NodeB. According to the relevant protocols, MIMO, 64QAM, and HSSCCH Less Operation cannot be configured concurrently to the same UE. SET This parameter MIMO, Enumeratio FRC(Optional) specifies the 64QAM n Type configuration preference of MIMO, 64QAM, and HS-SCCH Less Operation when both the UE and the cell support these three features.

文档密级:

prefered HSPAPlusSel HSPA PLUS ection character

MIMO,64Q AM

8/7/2013

华为机密,未经许可不得扩散

第390页,共3267页

162734118.xls.ms_office1
If the corresponding item of this parameter is selected, it indicates that the HspaPlusSwitch is enabled. Otherwise, it indicates that the HspaPlusSwitch is not enabled. Note that the actual use of this ADD function is Cell Hspa Plus CELLALGOS restricted by the Bit Field HspaPlusSwit function switch WITCH(Option license and the Type ch al) physical capability of the NodeB. The EFACH/MIMO switch specifies whether this EFACH/MIMO service is supported in the cell. The setting of the EFACH/MIMO switch does not affect the EFACH in the cell and the

文档密级:

64QAM(Ce ll 64QAM Function Switch), MIMO(Cell MIMO Function Switch), E_FACH(C ell E_FACH Function Switch), DTX_DRX( Cell DTX_DRX Function Switch), HS_SCCH_ LESS_OPE RATION(C ell HS_SCCH LESS OPERATIO N Function Switch), L2ENHAN CED(Cell L2ENHAN CED Function

64QAM,MI MO,E_FAC H,DTX_DR X,HS_SCC H_LESS_O PERATION ,L2ENHAN CED

8/7/2013

华为机密,未经许可不得扩散

第391页,共3267页

162734118.xls.ms_office1
This parameter specifies the difference between the total HSPA power and the maximum transmission power of a cell. The maximum value of HSPA dynamical power can be adjusted to the total amount The Offset of ADD of HSPA power. Interval HSPA Total CELLHSDPA( If the parameter Type Power Optional) value is set too low, the total HSPA power will be too low, thus impacting the throughput of HSDPA subscribers at the border of a cell. For details about this parameter, refer to 3GPP TS 25.308.

文档密级:

HspaPower

-500~0

-50~0, step:0.1

8/7/2013

华为机密,未经许可不得扩散

第392页,共3267页

162734118.xls.ms_office1
HSPA serving cell change is usually triggered by event 1D. To avoid frequent serving cell change which may affect the system performance, a protection timer TimerHSPA is needed. This timer shall be started upon SET HSPA handover HOCOMM(Opt completed, i.e. ional) the serving HSDSCH cell changed or the EDCH serving cell changed. And no more 1Dtriggered serving cell change shall be performed until the timer expires. However, this timer shall not restrict HSPA serving cell change to another This parameter specifies whether index 1 of the size of a transport SET block transmitted HSSCCHLESS in HS-SCCH OPPARA(Optio Less Operation nal) mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol.

文档密级:

HSPA HspaTimerLe hysteresis n timer length

Interval Type

0~1024

0~1024

Support HspdcchSeco second code ndCodeSupp1 Flag for Tb1

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

8/7/2013

华为机密,未经许可不得扩散

第393页,共3267页

162734118.xls.ms_office1
This parameter specifies whether index 2 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. This parameter specifies whether index 3 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. This parameter specifies whether index 4 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol.

文档密级:

Support HspdcchSeco second code ndCodeSupp2 Flag for Tb2

SET HSSCCHLESS OPPARA(Optio nal)

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

Support HspdcchSeco second code ndCodeSupp3 Flag for Tb3

SET HSSCCHLESS OPPARA(Optio nal)

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

Support HspdcchSeco second code ndCodeSupp4 Flag for Tb4

SET HSSCCHLESS OPPARA(Optio nal)

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

8/7/2013

华为机密,未经许可不得扩散

第394页,共3267页

162734118.xls.ms_office1
The parameter specifies the number of HSDPSCH codes. This parameter is valid only when "Allocate Code Mode" is set to "Manual". If the parameter value is set too low, the HSDPA code resources are restricted and the Code Number ADD HSDPA Interval HsPdschCode for HSCELLHSDPA( performance is Type Num PDSCH Optional) affect. If the parameter value is set too high, the HSDPA code resources are wasted, thus increasing the admission rejection rate of R99 services. For detailed information about this parameter, refer to 3GPP TS 25.308.

文档密级:

1~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第395页,共3267页

162734118.xls.ms_office1
The parameter determines the maximum number of HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to "Automatic". The number of codes used by the HSPDSCH is dynamically set between "Code Code Max ADD Max Number for Interval HsPdschMax Number for HS- CELLHSDPA( HS-PDSCH" and Type CodeNum PDSCH Optional) "Code Min Number for HSPDSCH", based on whether the code tree is idle or busy. When the code resource used by the nonHSPA services is little, the HSPDSCH uses the rest idle codes as much as possible, and the maximum number of idle

文档密级:

1~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第396页,共3267页

162734118.xls.ms_office1
The parameter specifies the minimum number of the HSPDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to Automatic. The number of codes used by the HSPDSCH is dynamically set Code Min ADD between "Code Interval HsPdschMin Number for HS- CELLHSDPA( Max Number for Type CodeNum PDSCH Optional) HS-PDSCH" and "Code Min Number for HSPDSCH", based on the idle state of the code tree. When the non-H services need more code resources, the nonH service will gradually occupy the codes used by the HS-PDSCH. The number of

文档密级:

1~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第397页,共3267页

162734118.xls.ms_office1
Measure Power Offset (MPO) Minus3.0D Constant is used B(-3.0dB), to compute Minus2.5D Measure Power B(-2.5dB), Offset, as shown Minus2.0D in Measure Power B(-2.0dB), Offset = Max(-6, Minus1.5D Min(13,CellMaxP B(-1.5dB), ower Minus1.0D PcpichPower B(-1.0dB), Measure Power Minus0.5D OffsetConstant)). B(-0.5dB), If the parameter 0.0DB(0.0d value is B), ADD HS-PDSCH unreasonable, the 0.5DB(0.5d -3~19, HsPdschMPO CELLHSDPA( Enumeratio MPO Constant CQI in some B), step:0.5 ConstEnum Optional) n Type scenarios will 1.0DB(1.0d exceed the range B), of 0 to 30. As a 1.5DB(1.5d result, the NodeB B), MAC-hs cannot 2.0DB(2.0d schedule the B), subscriber in the 2.5DB(2.5d corresponding B), time or cannot 3.0DB(3.0d schedule multiple B), subscribers with 3.5DB(3.5d the difference of B), channel 4.0DB(4.0d conditions. For B), details of the IE 4.5DB(4.5d

文档密级:

ADD CELLSETUP(O Hspdsch HspdschPrioT ptional) priority Tx xDiversityMo ADD diversity mode de NRNCCELL(O ptional)

This parameter indicates the TX diversity preferably selected by HSPDSCH.

None, None, Enumeratio STTD, CP1 STTD, CP1 n Type

8/7/2013

华为机密,未经许可不得扩散

第398页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of the ADD High subrack subrack whose HSRN VPCLCX(Mand No. high-end port atory) carries the VPL/VCL cross connection. This parameter decides the maximum number of subscribers that the NodeB can schedule in a TTI period. In the scenarios like outdoor macro cells with power restricted, it is less likely to schedule multiple subscribers simultaneously, ADD Code Number so two HSHsScchCode CELLHSDPA( for HS-SCCH SCCHs are Num Optional) configured. In the scenarios like indoor pico with code restricted, it is more likely to schedule multiple subscribers simultaneously, so four HSSCCHs are configured. If excessive HSSCCHs are configured, the code resource is This parameter specifies the time interval of HSUPA TTI sending HSUPA 10ms schedule SET Hsupa10msSc scheduling period with FRC(Optional) hPrdForGrant information for grant TTI 10ms when the user has Schedule Grant.

文档密级:

Interval Type

0~5

0 to 5

Interval Type

1~15

1~15

D10, D20, D50, D100, 10, 20, 50, Enumeratio D200, 100, 200, n Type D500, 500, 1000 D1000

8/7/2013

华为机密,未经许可不得扩散

第399页,共3267页

162734118.xls.ms_office1
This parameter specifies the time interval of sending HSUPA HSUPA TTI scheduling 10ms schedule SET information alone period without FRC(Optional) for TTI 10ms grant when the user has no Schedule Grant and its buffer length is greater than zero. This parameter specifies the time interval of HSUPA TTI sending HSUPA 2ms schedule SET scheduling period with FRC(Optional) information for grant TTI 2ms when the user has Schedule Grant. This parameter specifies the time interval of sending HSUPA HSUPA TTI scheduling 2ms schedule SET information alone period without FRC(Optional) for TTI 2ms when grant the user has no Schedule Grant and its buffer length is greater than zero.

文档密级:

Hsupa10msSc hPrdForNonG rant

D10, D20, D50, D100, 10, 20, 50, Enumeratio D200, 100, 200, n Type D500, 500, 1000 D1000

Hsupa2msSch PrdForGrant

D2, D10, D20, D50, D100, Enumeratio D200, n Type D500, D1000

2,10, 20, 50, 100, 200, 500, 1000

Hsupa2msSch PrdForNonGr ant

D2, D10, D20, D50, D100, Enumeratio D200, n Type D500, D1000

2,10, 20, 50, 100, 200, 500, 1000

AF of hsupa HsupaBackGr background oundAF service

UL activity SET factor of the ADMCTRL(Op HSUPA tional) background service.

Interval Type

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第400页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA BE HsupaBeSho SHO THD RateThd RATE

Threshold for rate decrease of HSUPA BE service soft handover. If the current rate is D8, D16, beyond the D32, D64, threshold, the rate D128, over the EDCH is D144, lowered to the SET D256, threshold before DCCC(Optional Enumeratio D384, the soft handover, ) n Type D608, thus ensuring the D1450, success of the soft D2048, handover of the D2890, HSUPA BE D5760 service. The rate increase of HSUPA in SHO status is not limitted by this parameter.

8, 16, 32, 64, 128, 144, 256, 384, 608, 1450, 2048, 2890, 5760

When the dynamic CE algorithm on NodeB is applied, the CE consumption of HSUPA UE is based on the GBR. When the dynamic CE algorithm on NodeB is not applied, the CE consumption of ADD HSUPA UE is HSUPA NODEBALGO based on the MBR, HsupaCeCons Credit Enumeratio PARA(Optional MBR. If the CE GBR umeSelection Consume Type n Type ) consumption of HSUPA UE is based on the GBR, the CE LDR will not select HSUPA users to do data rate reduction. If the CE consumption of HSUPA UE is based on the MBR,the CE LDR will select HSUPA users to

MBR, GBR

8/7/2013

华为机密,未经许可不得扩散

第401页,共3267页

162734118.xls.ms_office1
This parameter determines whether the compressed mode (CM) is permitted for the UE when HSUPA services exist. If the parameter value is set to Permit, compressed mode is permitted on HSUPA, and For each HSUPA services Limited, switch of can be set up Permit, CM SET this when the BasedOnUE HsupaCMPer permission ind CMCF(Optional Enumeratio parameter, compressed mode Cap(Based missionInd on HSUPA ) n Type the value activated. If the On UE can be ON, parameter value is Capability) OFF. set to Limited, channel switch on E2D (from EDCH to DCH) should be performed before the compressed mode is started and no HSUPA services should exist when the compressed mode is activated. If the

文档密级:

AF of hsupa HsupaConvA conv service F

UL activity SET factor of the ADMCTRL(Op HSUPA tional) conversational service.

Interval Type

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第402页,共3267页

162734118.xls.ms_office1
Strategy of the UE for rate adjustment over the EDCH. RATE_UP_AND _DOWN_ON_E DCH indicates RATE_UP_ that the rate over AND_DO the EDCH can be SET WN_ON_E raised or lowered. DCCC(Optional Enumeratio DCH, RATE_UP_ONL ) n Type RATE_UP_ Y_ON_EDCH ONLY_ON indicates that the _EDCH rate over the EDCH can only be raised, which means that the UE can switch to the FACH state at any rate.

文档密级:

HSUPA HsupaDcccSt DCCC g Strategy

RATE_UP_ AND_DO WN_ON_E DCH, RATE_UP_ ONLY_ON _EDCH

Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services Equal priority ADD increases, which HsupaEqualP Interval HSUPA user CELLCAC(Opti impacts access riorityUserPB Type PBR threshold onal) success rate. If RThd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion.

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第403页,共3267页

162734118.xls.ms_office1

文档密级:

Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services increases, which High priority ADD HsupaHighPri impacts access Interval HSUPA user CELLCAC(Opti orityUserPBR success rate. If Type PBR threshold onal) Thd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestionRecom mended.

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第404页,共3267页

162734118.xls.ms_office1

文档密级:

Initial rate of HsupaInitialR HSUPA BE ate traffic

HSUPA BE traffic Initial bit D8, D16, rate. When D32, D64, DCCC algorithm D128, switch and D144, HSUPA DCCC D256, SET algorithm switch Enumeratio D384, FRC(Optional) are enabled, the n Type D608, uplink initial bit D1440, rate will be set to D2048, this value if the D2880, uplink max bit D5740 rate is higher than the initial bit rate.

8,16,32,64,1 28,144,256, 384,608,144 0,2048,2880 ,5740

AF of hsupa HsupaInteract interactive AF service

UL activity SET factor of the ADMCTRL(Op HSUPA tional) interactive service.

Interval Type

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第405页,共3267页

162734118.xls.ms_office1
Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services Low priority ADD increases, which HsupaLowPri Interval HSUPA user CELLCAC(Opti impacts access orityUserPBR Type PBR threshold onal) success rate. If Thd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion. Length of SET smoothing filter LDM(Optional) window of HSUPA bit rate.

文档密级:

0~100

0~1, step:0.01

HsupaPrvidBi HSUPA bit tRateFilterLe rate filter len n

Interval Type

1~32

1~32

The minimum number of HSUPA RAB establish request per SPU to report KPI alarm. In a checking period,if the number of Minimum HSUPA RAB Number of SET establish request Interval HsupaRabEst HSUPA RAB KPIALMTHD( is higher than the Type AttMinNum Establish Optional) threshold and the Request HSUPA RAB setup successful ratio is lower than this threshold,the KPI alarm of HSUPA RAB setup ratio is reported.

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第406页,共3267页

162734118.xls.ms_office1
Threshold of HSUPA RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio Threshold of is lower than this HSUPA RAB SET threshold and the Interval HsupaRabEst Setup KPIALMTHD( Type number of SuccRatioThd Successful Optional) HSUPA RAB Ratio establish request is higher than the related threshold,the KPI alarm of HSUPA RAB setup ratio is reported.

文档密级:

0~100

0~100

AF of hsupa HsupaStream streaming AF service

UL activity SET factor of the Interval ADMCTRL(Op HSUPA Type tional) streaming service.

0~100

0~1, step: 0.01

Max HSUPAthrou throughput of ghput HSUPA

The total HSUPA ACT throughput of all Interval LICENSE(Opti the operators Type onal) cannot exceed that defined in the license file.

0~3910000

0 to 3910000

HSUPA auto ADD HSUPA auto retransmit load Interval HsupAuRetrn CELLLDM(Opt retransmit load release Type sLdRelThd ional) release threshold. threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第407页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA auto ADD HSUPA auto retransmit load Interval HsupAuRetrn CELLLDM(Opt retransmit load trigger Type sLdTrigThd ional) trigger threshold. threshold

0~100

0~1, step:0.01

The cell will shut down Cell Dynamic ADD automatically ShutDown CELLDYNSHU only when the Interval HsupaUserNu Hsupa User TDOWN(Optio HSUPA user Type mThd number nal) number is not Threshold greater than the threshold.

0~5

0~5

8/7/2013

华为机密,未经许可不得扩散

第408页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA HUBKGPRIP background ATH primary path

ADD HSUPA TRMMAP(Opti background onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSUPA HSUPA ADD background background pri HUBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第409页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA ADD HSUPA HUBKGSEC background TRMMAP(Opti background PATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA ADD background pri HUBKGSEC LOADEQ(Opti sec path load WHT onal) ratio threshold

HSUPA background primary secondary path load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第410页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA HSUPA ADD background background HUBKGUL TRMFACTOR( service uplink service uplink Optional) factor factor.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第411页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSUPA ADD HSUPA HUCONVPR conversational TRMMAP(Opti conversational IPATH primary path onal) primary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSUPA HSUPA ADD conversational conversational HUCONVPR LOADEQ(Opti bearing primary pri path load ITH onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第412页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA ADD HSUPA HUCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA HSUPA conversational conversational ADD primary HUCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第413页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA HSUPA ADD conversational conversational TRMFACTOR( HUCONVUL service uplink service uplink Optional) factor factor.

Interval Type

0~100

0~100

HSUPA high HUHIGHINT interactive pri ERACTPRIT path load H threshold

HSUPA high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

HSUPA high priority HSUPA high ADD interactive HUHIGHINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第414页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA ADD HSUPA interactive Interval TRMFACTOR( interactive service HUINTERUL service uplink Type Optional) uplink factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第415页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA high ADD HSUPA high HUINTHGH PRI interactive TRMMAP(Opti PRI interactive PRIPATH primary path onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第416页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA high ADD HSUPA high HUINTHGH PRI interactive TRMMAP(Opti PRI interactive SECPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第417页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSUPA low ADD HSUPA low PRI AF42, HUINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, PRIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第418页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSUPA low ADD HSUPA low PRI AF42, HUINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, SECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第419页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA middle PRI HUINTMIDP interactive RIPATH primary path

ADD HSUPA middle TRMMAP(Opti PRI interactive onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第420页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA ADD HSUPA middle middle PRI HUINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA low HULOWINT interactive pri ERACTPRIT path load H threshold

HSUPA low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

HSUPA low priority HSUPA low ADD interactive HULOWINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第421页,共3267页

162734118.xls.ms_office1
This parameter specifies whether ADD the alarm EMU(Optional) reporting for humidity is enabled. This parameter specifies the ADD upper threshold EMU(Optional) for humidity alarm. This parameter specifies the ADD lower threshold EMU(Optional) for humidity alarm.

文档密级:

Enable Humidity HUM_MASK Alarm Reporting

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n)

Upper Limit HUM_THD_ of Humidity HIGH Alarm

String Type -

1~9 character

Lower Limit HUM_THD_ of Humidity LOW Alarm

String Type -

1~9 character

HSUPA mid interactive pri HUMIDINTE path load RACTPRITH threshold

HSUPA middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

HSUPA middle priority HSUPA mid ADD interactive HUMIDINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第422页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of the UNI link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For ADD the AOUa in E1 High UNI link Interval HUNILNKN VPCLCX(Optio transmission No. Type nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured.

文档密级:

0~167

0 to 167

HSUPA IMS ADD HSUPA Signal HUSIPPRIPA Signal primary TRMMAP(Opti primary path. TH path onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第423页,共3267页

162734118.xls.ms_office1

文档密级:

HUSIPPRIT H

HSUPA IMS HSUPA IMS ADD Signal bearing Interval Signal pri path LOADEQ(Opti primary path load Type load threshold onal) threshold.

0~100

0~100

HSUPA IMS ADD HSUPA Signal HUSIPSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA IMS HSUPA IMS ADD Signal primary Signal pri sec HUSIPSECW LOADEQ(Opti secondary path path load ratio HT onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第424页,共3267页

162734118.xls.ms_office1

文档密级:

HUSIPUL

HSUPA IMS ADD HSUPA IMS signal uplink TRMFACTOR( uplink factor. factor Optional)

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第425页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSUPA ADD HSUPA Signal HUSRBPRIP Signal primary TRMMAP(Opti primary path. ATH path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSUPA Signal HSUPA ADD bearing primary HUSRBPRIT Signal pri path LOADEQ(Opti path load H load threshold onal) threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第426页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA ADD HSUPA Signal HUSRBSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA Signal HSUPA ADD primary Signal pri sec HUSRBSEC LOADEQ(Opti secondary path path load ratio WHT onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第427页,共3267页

162734118.xls.ms_office1

文档密级:

HUSRBUL

ADD HSUPA signal HSUPA SRB TRMFACTOR( uplink factor uplink factor. Optional)

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第428页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD HSUPA AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

HSUPA HUSTRMPRI streaming PATH primary path

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

HSUPA streaming pri HUSTRMPRI path load TH threshold

HSUPA ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第429页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

HSUPA ADD HSUPA HUSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

HSUPA HSUPA ADD streaming primary streaming pri Interval HUSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第430页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA ADD HSUPA streaming Interval HUSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第431页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

ADD HSUPA Voice HSUPA Voice HUVOICEPR TRMMAP(Opti primary path primary path. IPATH onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第432页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

ADD HSUPA Voice HSUPA Voice HUVOICESE TRMMAP(Opti secondary path secondary path. CPATH onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第433页,共3267页

162734118.xls.ms_office1

文档密级:

HSUPA voice ADD HSUPA voice HUVOICEU service uplink TRMFACTOR( service uplink L factor Optional) factor.

Interval Type

0~100

0~100

HVCI

High VCI

This parameter ADD specifies the VCI Interval VPCLCX(Optio of the high-end Type nal) VCL.

32~65535

32 to 65535

HVPI

High VPI

This parameter specifies the VPI ADD of the high-end Interval VPCLCX(Mand VPL/VCL. If the Type atory) VPL is cross connected, VPI cannot be 0.

0~255

0 to 255

8/7/2013

华为机密,未经许可不得扩散

第434页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1A hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. Event 1A is a key event that adds a cell to the active set. To ensure timely handover, the hysteresis of event 1A should be set a little

文档密级:

HystFor1A

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第435页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1B hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:

文档密级:

HystFor1B

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第436页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1C hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:

文档密级:

HystFor1C

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第437页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1D hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:

文档密级:

HystFor1D

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第438页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:

文档密级:

HystFor1F

1F hysteresis

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第439页,共3267页

162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:

文档密级:

HystFor1J

1J hysteresis

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第440页,共3267页

162734118.xls.ms_office1
Hysteresis value for the event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. Hysteresis value for the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time.

文档密级:

HystFor2B

ADD CELLINTERFR EQHOCOV(Op tional) 2B hysteresis SET INTERFREQH OCOV(Optional )

Interval Type

0~29

0~14.5,Step :0.5

Hystfor2C

ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH 2C hysteresis ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)

Interval Type

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第441页,共3267页

162734118.xls.ms_office1
Hysteresis value for the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. Interval In periodical Type report mode, this parameter is used to resist the pingpong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the

文档密级:

HystFor2D

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional 2D hysteresis ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第442页,共3267页

162734118.xls.ms_office1
Hysteresis value for the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2F might not be triggered in time. Interval In periodical Type report mode, this parameter is used to resist the pingpong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the

文档密级:

HystFor2F

2F hysteresis

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第443页,共3267页

162734118.xls.ms_office1
Hysteresis value for the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the Interval handover Type algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for

文档密级:

Hystfor3A

ADD CELLINTERR ATHOCOV(Op 3A hysteresis tional) SET INTERRATHO COV(Optional)

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第444页,共3267页

162734118.xls.ms_office1
Hysteresis value for the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the Interval handover Type algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE hands over must be of good quality. Therefore, the conditions for

文档密级:

Hystfor3C

ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO 3C hysteresis NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第445页,共3267页

162734118.xls.ms_office1
Hysteresis value for inter-RAT measurement periodical reports. This parameter aims to prevent the mis-decision caused by unexpected jitters of signals during inter-RAT handover decisions. The HystforInterRAT and the interRAT handover Interval decision threshold Type determine whether to trigger inter-RAT handovers. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the

文档密级:

Inter-RAT HystforInterR hysteresis AT

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第446页,共3267页

162734118.xls.ms_office1
Hysteresis for inter-frequency hard handover in periodical report mode. This parameter is used to estimate the interfrequency handover at the RNC. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. After a connection is established successfully, the timer is started. If the timer does not receive the detection message when the timer expires, the connection will be released.

文档密级:

HHO HystForPrdInt hysteresis erFreq

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)

Interval Type

0~29

0~14.5,Step :0.5

IARXTMR

Inactive RX timer

SET SCCPTMR(Opt ional)

Interval Type

180~1260

180~1260

IATXTMR

Inactive TX timer

After a connection is established successfully, the SET timer is started. Interval SCCPTMR(Opt When the timer Type ional) expires, a detection message will be sent to the peer end.

60~600

60~600

8/7/2013

华为机密,未经许可不得扩散

第447页,共3267页

162734118.xls.ms_office1

文档密级:

The ICMP ADD ICMP packet Packet length ICMPPKGLE IPPATH(Option Length include the IP N al) header length.

Interval Type

44~1024

44~1024

ID

Task ID

This parameter STR specifies the ID Interval SCHTSK(Optio of the scheduled Type nal) task to be started.

1~30,100~3 1~30,100~3 2767 2767

Cell barred IdleCellBarre indicator for d SIB3

Indicating whether the UE in idle mode is allowed to access the cell. When the cell status is BARRED, it indicates that the ADD BARRED, BARRED, UEs in idle mode CELLACCESS Enumeratio NOT_BAR NOT_BAR are barred to STRICT(Manda RED RED select/reselect the n Type tory) cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331.

8/7/2013

华为机密,未经许可不得扩散

第448页,共3267页

162734118.xls.ms_office1
Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB3] is BARRED. If this parameter is ALLOWED, the ADD UE in idle mode Intra-freq cell ALLOWED ALLOWED CELLACCESS can select another IdleIntraFreq reselection ind Enumeratio , , STRICT(Option intra-frequency Reselection for SIB3 n Type NOT_ALL NOT_ALL al) cell when the cell OWED OWED selection/reselecti on condition is satisfied. If this parameter is NOT_ALLOWE D, the UE in idle mod cannot select another intrafrequency cell. The indicator can be neglected in case of emergency calls. For detailed

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第449页,共3267页

162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow ADD fading variance Interval CELLSELRES is, the greater this Type EL(Optional) parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the

文档密级:

IdleQhyst1s

Hysteresis 1 for idle mode

0~20

0~40, step:2

8/7/2013

华为机密,未经许可不得扩散

第450页,共3267页

162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow ADD fading variance Interval CELLSELRES is, the greater this Type EL(Optional) parameter. It is optional. If it is not configured, [Hysteresis 1] will be adopted as the value. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the

文档密级:

IdleQhyst2s

Hysteresis 2 for idle mode

0~20,255

{0~40},{25 5}, step:2

8/7/2013

华为机密,未经许可不得扩散

第451页,共3267页

162734118.xls.ms_office1
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value. This parameter is used for RSSI measurement. Interval The offset is Type subtracted from the neighboring cell measurement value before cell reselection. This parameter defines the offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode.

文档密级:

ADD INTERFREQN CELL(Optional) IdleQoffset1s IdleQoffset1sn ADD n INTRAFREQN CELL(Optional)

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第452页,共3267页

162734118.xls.ms_office1
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement. Interval The offset is Type subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the network planner according to reality.

文档密级:

ADD INTERFREQN CELL(Optional) IdleQoffset2s IdleQoffset2sn ADD n INTRAFREQN CELL(Optional)

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第453页,共3267页

162734118.xls.ms_office1
Threshold for inter-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection Inter-freq cell procedure will be ADD reselection started. This Interval IdleSintersear CELLSELRES threshold for parameter is not Type ch EL(Optional) idle mode configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher

文档密级:

{-16~10,127 32~20},{12 7}, step:2

8/7/2013

华为机密,未经许可不得扩散

第454页,共3267页

162734118.xls.ms_office1
Threshold for intra-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell Intra-freq cell reselection ADD reselection procedure will be Interval IdleSintrasear CELLSELRES threshold for started. This Type ch EL(Optional) idle mode parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold

文档密级:

{-16~10,127 32~20},{12 7}, step:2

8/7/2013

华为机密,未经许可不得扩散

第455页,共3267页

162734118.xls.ms_office1

文档密级:

IdleTbarred

Time barred for SIB3

This parameter is valid when [Cell barred indicator for SIB3] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to D10, D20, ADD BARRED. The D40, D80, 10, 20, 40, CELLACCESS greater the value, D160, 80, 160, Enumeratio STRICT(Option the lower the D320, 320, 640, n Type al) frequency of the D640, 1280 UE trying to read D1280 the cell bar status. The smaller the value, the higher the frequency of the UE trying to read the cell bar status. For detailed information, refer to 3GPP TS 25.331.

IDLETMR

Timer_Idle

Interval for ADD sending the SAALLNK(Opt POLL message ional) when no data is transmitted.

Interval Type

UNI: 10000~300 100~30000 00 NNI: 100~30000

8/7/2013

华为机密,未经许可不得扩散

第456页,共3267页

162734118.xls.ms_office1
After the coverage based handover succeeds, to avoid the handover of the UE to another frequency due to the following factors: overload, speed estimation, MBMS channel reselection, and QoS, frequent handovers occur. The RNC will SET start the interInterval HOCOMM(Opt frequency nonType ional) coverage based anti-ping-pong timer and prohibit the handover or measurement caused by the previous factors before the timeout of the timer. The larger this parameter, the better effect the anti-frequent handover. This, however, will

文档密级:

The timer length of anti IFAntiPingpa pingpong ngTimerLengt NCOV h interfreq handover

0~120

0~120

IgorTmr

TigOR

CN flow control timer (short). The SET OVERLOAD Interval IUTIMERAND message received Type NUM(Optional) repeatedly in this period will be discarded.

5000~3000 5000~3000 0 0

8/7/2013

华为机密,未经许可不得扩散

第457页,共3267页

162734118.xls.ms_office1
ADD IMAGRP(Mand atory) ADD FRALNK(Mand atory) ADD IMALNK(Mand atory)

文档密级:

IMAGRPN

IMA group No.

This parameter specifies the number of an IMA group.

Interval Type

0~83

0 to 31(AEUa),0 to 83(AOUa)

IMAID

IMA ID

ADD This parameter Interval IMAGRP(Optio specifies the IMA Type nal) ID.

0~255

0 to 255

8/7/2013

华为机密,未经许可不得扩散

第458页,共3267页

162734118.xls.ms_office1

文档密级:

IMALNKN

ADD IMALNK(Mand atory) IMA link No. STR IMATST(Mand atory)

This parameter specifies the number of an IMA link.

Interval Type

0~167

0 to 167

IMAVER

ADD This parameter IMA protocol IMAGRP(Optio specifies the IMA Enumeratio V1.0, V1.1 V1.0, V1.1 version nal) protocol version. n Type

8/7/2013

华为机密,未经许可不得扩散

第459页,共3267页

162734118.xls.ms_office1
This parameter specifies whether it is allowed to use the initial rate of IMS signaling set on the LMT, that is, the value of [Ims initial rate]. - ON: If the IMS signaling is SET carried on the FRC(Optional) DCH, the maximum rate of IMS signaling takes the value of [Ims initial rate]. - OFF: The maximum rate of IMS signaling does not take the value of [Ims initial rate]. This parameter specifies the channel type of IMS signaling. - DCH: Both uplink and downlink are preferably carried on DCH. SET - HSDPA: Uplink FRCCHLTYPE is preferably PARA(Optional carried on DCH, ) and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried

文档密级:

IMS Bear ImsBearEnha enhanced ncedSwitch switch

Enumeratio OFF, ON n Type

OFF, ON

ImsChlType

IMS channel type

DCH(UL_D CH,DL_DC H), DCH, HSDPA(UL Enumeratio HSDPA, _DCH,DL_ n Type HSPA HSDSCH), HSPA(UL_ EDCH,DL_ HSDSCH)

8/7/2013

华为机密,未经许可不得扩散

第460页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends IMS data on the Iub interface.

文档密级:

IMSGBR

IMS MAC-c flow GBR

1~1000

1~1000

IMSI

IMSI ID

RST IUR(Mandatory UE IMSI ID. )

String Type -

15-bit decimal numerals

ImsiMax

The end of IMSI

ADD The maximum of IMSISNAMAP( String Type one IMSI range. Mandatory)

15-bit decimal numerals

ImsiMin

The start of IMSI

ADD The minimum of IMSISNAMAP( String Type one IMSI range. Mandatory)

15-bit decimal numerals

8/7/2013

华为机密,未经许可不得扩散

第461页,共3267页

162734118.xls.ms_office1
This parameter specifies the initial access rate of IMS signaling. When the [Ims Bear enhanced switch] is ON: - If the IMS signaling is carried on the DCH in the downlink, the SET initial rate takes FRC(Mandatory the larger value Enumeratio D32, D64 ) between this n Type parameter and the CN-assigned bit rate. - If the IMS signaling is carried on the HSPA, the MBR takes the larger value between this parameter and the CNassigned bit rate.

文档密级:

IMS initial ImsInitialAcc rate essRate

32, 64

ImsiRtMax

Maximum of IMSI route parameter in IDNNS

ADD IMSIIDNNSCN IDMAP(Mandat ory)

Maximum of IMSI route parameter in IDNNS.

Interval Type

0~999

0~999

ImsiRtMin

Minimum of IMSI route parameter in IDNNS

ADD IMSIIDNNSCN IDMAP(Mandat ory)

Minimum of IMSI route parameter in IDNNS.

Interval Type

0~999

0~999

8/7/2013

华为机密,未经许可不得扩散

第462页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends IMS data on the Iub interface.

文档密级:

IMSMBR

IMS MAC-c flow MBR

1~2000

1~2000

If data is not transmitted on the EDCH for several consecutive EDCH TTIs, the interval at which two consecutive patterns are transmitted on the UL DPCCH should be Threshold For changed from D1, D4, SET DPCCH DtxCycle1 to D8, D16, InactThsForC DTXDRXPAR Enumeratio 1,4,8,16,32, Transmission DtxCycle2. Here, D32, D64, ycle2 A(Optional) n Type 64,128,256 Cycle 2 the value of D128, D256 DtxCycle2 is an integer multiple of the value of DtxCycle1. This parameter specifies the number of EDCH TTIs. For details, refer to the 3GPP TS 25.331 protocol.

8/7/2013

华为机密,未经许可不得扩散

第463页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of consecutive subframes that the UE should monitor on each DRX SET HS-SCCH of the Inactivity DTXDRXPAR HS-SCCH set Threshold A(Optional) immediately after the data reception on the HS-SCCH or HS-PDSCH. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the number of subframes that the UE should monitor on the EInactivity AGCH of the SET Threshold for serving radio link DTXDRXPAR UE Grant and on the EA(Optional) Monitoring RGCH of each radio link after the data transmission on the EDCH. For details, refer to the 3GPP TS This parameter Enable specifies whether Infrared Sensor ADD the alarm Alarm EMU(Optional) reporting for Reporting infrared sensor is enabled.

文档密级:

InactThsForD rxCycle

D0, D1, D2, D4, D8, 0,1,2,4,8,16, Enumeratio D16, D32, 32,64,128,2 n Type D64, D128, 56,512 D256, D512

InactThsForG rantMonitorin g

D0, D1, D2, D4, D8, 0,1,2,4,8,16, Enumeratio D16, D32, 32,64,128,2 n Type D64, D128, 56 D256

INFRA_RED _MASK

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n)

8/7/2013

华为机密,未经许可不得扩散

第464页,共3267页

162734118.xls.ms_office1

文档密级:

INHT

Inhibit Type

This parameter LOGIC(Log LOGIC(Log INH specifies the ic inhibit), ic inhibit), BRD(Mandator inhibit type Enumeratio PHYSICAL PHYSICAL y) (Physical inhibit, n Type (Physical (Physical Logic inhibit). inhibit) inhibit)

INHTMR

Timer_NOCREDIT

ADD Maximum Interval SAALLNK(Opt allowed no-credit Type ional) time length.

1200~2000 1200~2000

Integrity IntegrityProte protection ctAlgo algorithm

SET UIA(Optional)

The integrity protection algorithm Bit Field supported by Type RNC. Only UIA1 is supported currently.

UIA1

For each switch of this parameter, the value can be: ON or OFF.

8/7/2013

华为机密,未经许可不得扩散

第465页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends interactive service data on the Iub interface. The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends interactive service data on the Iub interface.

文档密级:

Interactive INTERACTG MAC-c flow BR GBR

Interval Type

1~1000

1~1000

INTERACT MBR

Interactive MAC-c flow MBR

Interval Type

1~2000

1~2000

8/7/2013

华为机密,未经许可不得扩散

第466页,共3267页

162734118.xls.ms_office1

文档密级:

ADD CELLMBDRIN InterFreqActi MBDR switch MBDR switch. TERFREQ(Opti veType onal)

Bit Field Type

CSAMR_I NTERFRE Q(CS AMR interfrequency switch), CSNONAM R_INTERF REQ(CS non AMR interfrequency switch), PSR99_INT ERFREQ(P SR99 interfrequency switch), PSHSPA_I NTERFRE Q(PSHSPA interfrequency switch)

CSAMR_I NTERFRE Q,CSNON AMR_INT ERFREQ,P SR99_INTE RFREQ,PS HSPA_INT ERFREQ

Threshold of signal quality of the target frequency for triggering interfrequency measurement. Inter-freq This parameter is ADD measure target used to set CELLINTERFR Interval InterFreqCov frequency measurement EQHONCOV( Type HOThdEcN0 trigger Ec/No control on the Optional) THD event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold.

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第467页,共3267页

162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

Inter-freq CS InterFreqCST measure start hd2DEcN0 Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第468页,共3267页

162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

Inter-freq CS InterFreqCST measure start hd2DRSCP RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第469页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of

文档密级:

Inter-freq CS InterFreqCST measure stop hd2FEcN0 Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第470页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed

文档密级:

Inter-freq CS InterFreqCST measure stop hd2FRSCP RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第471页,共3267页

162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this ADD parameter is, the CELLMBDRIN earlier downlink Interval TERFREQ(Opti MBDR algorithm Type onal) of inter frequency goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter

文档密级:

InterFreqDlM DL theshold bdrTrigThres hold

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第472页,共3267页

162734118.xls.ms_office1
L3 filtering coefficient for the inter-frequency measurement. The physical meaning of this parameter is the same as the measurement model and intrafrequency measurement. The difference is D0, D1, that the report D2, D3, D4, period for the D5, D6, D7, inter-frequency 0,1,2,3,4,5,6 Enumeratio D8, D9, measurement is ,7,8,9,11,13, n Type D11, D13, 480 ms, whereas 15,17,19 D15, D17, the report period D19 for the intrafrequency measurement is 200 ms. In practice, it can be adjusted according to traffic performance measurement. The larger the value of this parameter, the

文档密级:

Interfrequency InterFreqFilte measure filter rCoef coeff

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)

8/7/2013

华为机密,未经许可不得扩散

第473页,共3267页

162734118.xls.ms_office1
According to the cell interfrequency hierarchical selection, the RNC chooses the proper interINTER_FR frequency EQ_COV(C measurement overagecontrol based interparameters to frequency implement handover), coverage, speed INTER_FR estimation, and EQ_COV_ traffic absorption. NCOV(Cov Inter-freq ADD INTER_FREQ_C erage-based InterFreqHOS handover type CELLHOCOM Enumeratio OV: coverageand nonwitch switch M(Optional) n Type based intercoveragefrequency based interhandover. RAT INTER_FREQ_C handover), OV_NCOV: INTER_FR coverage-based EQ_TA(Tra inter-frequency ffic-based handover, and internon-coveragefrequency based interhandover) frequency handover triggered by speed estimation. INTER_FREQ_T

文档密级:

INTER_FR EQ_COV,I NTER_FRE Q_COV_N COV,INTE R_FREQ_T A

8/7/2013

华为机密,未经许可不得扩散

第474页,共3267页

162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

Inter-freq H InterFreqHTh measure start d2DEcN0 Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第475页,共3267页

162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

Inter-freq H InterFreqHTh measure start d2DRSCP RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第476页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of

文档密级:

Inter-freq H InterFreqHTh measure stop d2FEcN0 Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第477页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed

文档密级:

Inter-freq H InterFreqHTh measure stop d2FRSCP RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第478页,共3267页

162734118.xls.ms_office1
Indicating whether the interfrequency/RAT measurement control information should be delivered through the system information. When a UE in the CELL_FACH NOT_REQ state receives the UIRE, FACH INTER_FR Intermeasurement ADD EQ, freq/Inter-RAT occasion info InterFreqInter CELLMEAS(O Enumeratio INTER_RA Meas Ctrl Info message and in RatMeasInd ptional) n Type T, Ind the message the INTER_FR inter-frequency EQ_AND_I FDD NTER_RA measurement T indicator is set to TRUE, the UE performs interfrequency measurement and cell reselection assessment according to the inter-frequency neighboring cell list in the SIB11

文档密级:

NOT_REQ UIRE,INTE R_FREQ,IN TER_RAT,I NTER_FRE Q_AND_IN TER_RAT

8/7/2013

华为机密,未经许可不得扩散

第479页,共3267页

162734118.xls.ms_office1
Measurement quantity used in measurementbased interfrequency DRD in event (2C) triggered or periodical reporting mode. - CPICH: Common Pilot Channel - Ec/No: Signal-toNoise Ratio ADD - RSCP: Received CELLMBDRIN Signal Code Enumeratio TERFREQ(Opti Power n Type onal) - CPICH_Ec/No: to use the Ec/No measurement quantity for event 2C or InterFrequency periodical measurement. The physical unit is dB. - CPICH_RSCP: to use the RSCP measurement quantity for event 2C or Inter-

文档密级:

Inter-freq InterFreqMea Measure sQuantity Quantity

CPICH_EC/ NO~0 CPICH_RS CP~1 BOTH

CPICH_EC/ NO,CPICH _RSCP,BO TH

8/7/2013

华为机密,未经许可不得扩散

第480页,共3267页

162734118.xls.ms_office1
Timer length for inter-frequency measurement. After interfrequency measurement starts, if no interfrequency handover is performed when this timer expires, the interfrequency measurement and the compressed mode (if started) Interval are stopped. The Type value 0 indicates the timer is not to be enabled. This parameter is used to prevent the long interfrequency measurement state (compressed mode) due to unavailable measurement of the target cells that meet the handover When it is checked, system supports interfrequency neighboring detect function.

文档密级:

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD Inter-freq CELLINTERFR InterFreqMea measure timer EQHONCOV( sTime length Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)

0~512

0~512

InterFrequency InterFreqNCe Neighboring llDetectSwitc Cell Detect h Switch

SET NCELLDETEC TSWITCH(Opti onal)

Enumeratio OFF, ON n Type

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第481页,共3267页

162734118.xls.ms_office1
Threshold of signal quality of the target frequency for triggering interfrequency measurement. This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold. Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the

文档密级:

Inter-freq measure target InterFreqNCo frequency vHOThdEcN trigger Ec/No 0 THD

SET INTERFREQH ONCOV(Option al)

Interval Type

-24~0

-24~0

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2DEcN start Ec/No SET 0 THD INTERFREQH OCOV(Optional )

Interval Type

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第482页,共3267页

162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is Interval one of the key Type parameters in the inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the

文档密级:

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2DRSC start RSCP SET P THD INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第483页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2FEcN stop Ec/No SET 0 THD INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第484页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2FRSC stop RSCP SET P THD INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第485页,共3267页

162734118.xls.ms_office1
Cell-level switch for interfrequency and inter-RAT handover. INTERFREQ: only measuring inter-frequency cells and performing interfrequency handover. INTERRAT: only measuring GSM cells and Inter-freq and ADD performing interInterFreqRAT Inter-RAT CELLHOCOM Enumeratio RAT handover . Switch coexist switch M(Optional) n Type SIMINTERFREQ RAT: measuring both interfrequency and inter-RAT cells, performing interfrequency or interRAT handover according to the type of the cell that first meets the handover decision condition. The parameter

文档密级:

INTERFRE Q(interfrequency handover only), INTERRAT (inter-RAT handover only), SIMINTER FREQRAT( interfrequency and interRAT handover)

INTERFRE Q,INTERR AT,SIMIN TERFREQ RAT

8/7/2013

华为机密,未经许可不得扩散

第486页,共3267页

162734118.xls.ms_office1
Inter-frequency measurement report mode. PERIODICAL_R EPORTING: periodical interfrequency measurement report EVENT_TRIGG ER: eventtriggered interfrequency measurement report There are two inter-frequency handover report modes in the RNC, namely, event-triggered measurement report and periodical measurement report. The report mode is selected by setting the inter-frequency report mode switch that is RNC-oriented. This parameter is used to increase time of interfreqency reselection. It is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304.

文档密级:

ADD CELLINTERFR EQHOCOV(Op tional) InterSET frequency INTERFREQH InterFreqRep measure report OCOV(Optional ortMode mode ) ADD CELLMBDRIN TERFREQ(Opti onal)

PERIODIC AL_REPO RTING(Peri Enumeratio odical n Type reporting), EVENT_T RIGGER(E vent trigger)

PERIODIC AL_REPO RTING,EV ENT_TRIG GER

Inter-freqency ADD InterFreqTres scaling factor CELLSELRES elScalingFact for reselection EL(Optional) or delay

Interval Type

4~19,255

{1~4.75},{2 55}, step:0.25

8/7/2013

华为机密,未经许可不得扩散

第487页,共3267页

162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this ADD parameter is, the CELLMBDRIN earlier uplink Interval TERFREQ(Opti MBDR algorithm Type onal) of inter frequency goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter frequency

文档密级:

InterFreqUlM UL theshold bdrTrigThres hold

0~100

0~100

This parameter specifies whether SET inter-RAT Inter RAT InterPlmnHo OPERATORSH handover of the Inter Plmn Ho Enumeratio NO, YES AllowedInter ARINGMODE( UE among Allowed n Type Rat Optional) different operators is allowed.

NO,YES

8/7/2013

华为机密,未经许可不得扩散

第488页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies whether SET intra-RAT Intra RAT InterPlmnHo OPERATORSH handover of the Inter Plmn Ho Enumeratio NO, YES AllowedIntra ARINGMODE( UE among Allowed n Type Rat Optional) different operators is allowed.

NO,YES

ADD CELLMBDRIN InterRatActiv MBDR switch MBDR switch. TERRAT(Optio eType nal)

Bit Field Type

CSAMR_I NTERRAT( CSAMR_I CS AMR NTERRAT inter-RAT switch)

ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure start tional) hd2DEcN0 Ec/No THD SET INTERRATHO COV(Optional)

Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第489页,共3267页

162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for interRAT measurement, the RNC sends the signaling to Interval activate Type compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for

文档密级:

ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure start tional) hd2DRSCP RSCP THD SET INTERRATHO COV(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第490页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell

文档密级:

ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure stop tional) hd2FEcN0 Ec/No THD SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第491页,共3267页

162734118.xls.ms_office1

文档密级:

ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure stop tional) hd2FRSCP RSCP THD SET INTERRATHO COV(Optional)

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for interRAT Interval measurement, the Type RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第492页,共3267页

162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this ADD parameter is, the CELLMBDRIN earlier downlink Interval TERRAT(Optio MBDR algorithm Type nal) of inter RAT goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter

文档密级:

InterRatDlMb DL theshold drTrigThresh old

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第493页,共3267页

162734118.xls.ms_office1
L3 filtering coefficient for inter-RAT measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this Enumeratio parameter is set n Type too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the interfrequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis,

文档密级:

Inter-RAT InterRATFilte filter coeff rCoef

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)

D0, D1, D2, D3, D4, D5, D6, D7, 0,1,2,3,4,5,6 D8, D9, ,7,8,9,11,13, D11, D13, 15,17,19 D15, D17, D19

8/7/2013

华为机密,未经许可不得扩散

第494页,共3267页

162734118.xls.ms_office1
The maximum number of attempts to perform noncoverage-based inter-RAT handovers. This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a noncoverage-based inter-RAT handover failure. The handover attempts should involve the target cells that have not been tried but satisfy the handover conditions. This parameter specifies whether the inter-RAT handover, for example, to the GSM network, is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS. This parameter enables emergency calls to obtain the LCS of significant accuracy in a different system.

文档密级:

ADD CELLINTERR ATHONCOV( Inter-RAT Optional) InterRATHO handover max SET Attempts attempt times INTERRATHO NCOV(Optional )

Interval Type

1~16

1~16

Emergency SET LCS Inter-Rat InterRatHOPe SMLC(Optional Handover rmit ) Permit

Enumeratio NO, YES n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第495页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when ADD the signal quality Inter-RAT CS CELLMBDRIN of the target Interval InterRATHO handover TERRAT(Optio frequency is Type Thd decision THD nal) above this threshold. Note that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of

文档密级:

0~63

lower than 110, -110~48(1:-110; 2:-109; ...; 63:-48 )

This parameter specifies the type of inter-RAT handover that is SET DRD, DRD, Inter-Rat performed when InterRatHOT SMLC(Optional Enumeratio MEAS_BA MEAS_BA Handover Type the RNC cannot ype ) n Type SED SED meet the accuracy requirements of the emergency calls for the LCS.

8/7/2013

华为机密,未经许可不得扩散

第496页,共3267页

162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for HSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the Interval inter-RAT Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the

文档密级:

Inter-RAT H InterRATHTh measure start d2DEcN0 Ec/No THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第497页,共3267页

162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for HSDPA services. For non-HSDPA services, when RSCP is used as the measurement quantity for interRAT measurement, the RNC sends the signaling to Interval activate Type compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for

文档密级:

Inter-RAT H InterRATHTh measure start d2DRSCP RSCP THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第498页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for HSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell

文档密级:

Inter-RAT H InterRATHTh measure stop d2FEcN0 Ec/No THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第499页,共3267页

162734118.xls.ms_office1

文档密级:

Inter-RAT H InterRATHTh measure stop d2FRSCP RSCP THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for HSDPA services. For HSDPA services, when RSCP is used as the measurement quantity for interRAT Interval measurement, the Type RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第500页,共3267页

162734118.xls.ms_office1
Timer length for inter-RAT measurement. After inter-RAT measurement starts, if no interRAT handover is performed when this timer times out, the interRAT measurement is stopped. In addition, the compressed mode is deactivated, if Interval any; If the value Type is 0, you can infer that the interRAT measurement timer is not started. To set this parameter, you need to consider the following factors: This parameter aims to prevent that the handover conditions are not

文档密级:

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD Inter-RAT CELLINTERR InterRATMea measure timer ATHONCOV( sTime length Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)

0~512

0~512

Inter-Rat Neighboring InterRatNCell Cell Detect DetectSwitch Switch

When it is SET checked, system NCELLDETEC supports inter-rat Enumeratio OFF, ON TSWITCH(Opti neighboring n Type onal) detect function.

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第501页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The ADD event 3C is CELLINTERR triggered when ATHONCOV( the signal quality Inter-RAT CS Optional) of the target Interval InterRATNC handover SET frequency is Type ovHOCSThd decision THD INTERRATHO above this NCOV(Optional threshold. Note ) that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of

文档密级:

0~63

lower than 110, -110~48(1:-110; 2:-109; ...; 63:-48 )

8/7/2013

华为机密,未经许可不得扩散

第502页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain services. This parameter is used to set measurement control on the event 3C. The ADD event 3C is CELLINTERR triggered when ATHONCOV( the signal quality Inter-RAT PS Optional) of the target Interval InterRATNC handover SET frequency is Type ovHOPSThd decision THD INTERRATHO above this NCOV(Optional threshold. Note ) that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of

文档密级:

0~63

lower than 110, -110~48(1:-110; 2:-109; ...; 63:-48 )

8/7/2013

华为机密,未经许可不得扩散

第503页,共3267页

162734118.xls.ms_office1
Interval that the UE reports interRAT measurement results to the RNC. In periodical NON_PERI report mode, the ODIC_REP interval between ORT(Non two reports is the periodical configured value. reporting), That is, the UE D250~1 submits reports at D500~2 intervals of the D1000~3 configured time. D2000~4 The value Enumeratio D3000~5 "NON_PERIODI n Type D4000~6 C_REPORT" is, D6000~7 however, not D8000~8 recommended. In D12000~9 this setting, the D16000~10 UE behavior is D20000~11 not defined. D24000~12 Because the GSM D28000~13 RSSI D32000~14 measurement D64000 period is 480 ms, the inter-RAT periodical report interval should be longer than 480 ms. If Threshold of Inter-RAT handover failure due to physical channel failure. When the times of Inter-RAT handover failures due to physical channel failure exceeds the Interval threshold, UE will Type be turned into penalty state. And no try of Inter-Rat handover will be taken until penalty finishes. Also see parameter PenaltyTimeForIn terRatPhyChFail.

文档密级:

Inter-RAT InterRATPeri period report odReportInter interval val

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)

NON_PERI ODIC_REP ORT,250,50 0,1000,2000 ,3000,4000, 6000,8000,1 2000,16000, 20000,2400 0,28000,320 00,64000

ADD CELLINTERR ATHOCOV(Op tional) ADD CELLINTERR Inter-RAT HO ATHONCOV( physical InterRatPhyC Optional) channel failure hFailNum SET THD INTERRATHO COV(Optional) SET INTERRATHO NCOV(Optional )

0~63

0~63

8/7/2013

华为机密,未经许可不得扩散

第504页,共3267页

162734118.xls.ms_office1
Inter-RAT pingpong hysteresis. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE pingpong handover between the 2G network and the 3G network in the Interval period specified Type by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the pingpong handover punish timer.

文档密级:

ADD CELLINTERR ATHOCOV(Op Inter-RAT InterRATPing tional) PingPong Hyst PongHyst SET INTERRATHO COV(Optional)

0~15

0~7.5,Step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第505页,共3267页

162734118.xls.ms_office1
Inter-RAT pingpong timer. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE pingpong handover between the 2G network and the 3G network in the Interval period specified Type by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the pingpong handover punish timer.

文档密级:

Inter-RAT InterRATPing PingPong PongTimer timer

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第506页,共3267页

162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for PS domain non-HSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:

文档密级:

Inter-RAT InterRATR99 R99 PS PsThd2DEcN measure start 0 Ec/No THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第507页,共3267页

162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for PS domain non-HSDPA services. For PS domain HSDPA services, when RSCP is used as the measurement quantity for interRAT measurement, the Interval RNC sends the Type signaling to activate compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode

文档密级:

Inter-RAT InterRATR99 R99 PS PsThd2DRSC measure start P RSCP THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第508页,共3267页

162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for PS domain non-HSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-RAT Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the

文档密级:

Inter-RAT InterRATR99 R99 PS PsThd2FEcN measure stop 0 Ec/No THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第509页,共3267页

162734118.xls.ms_office1

文档密级:

Inter-RAT InterRATR99 R99 PS PsThd2FRSC measure stop P RSCP THD

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for PS domain non-HSDPA services. For PS domain non-HSDPA services, when RSCP is used as the measurement quantity for interInterval RAT Type measurement, the RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第510页,共3267页

162734118.xls.ms_office1
Inter-RAT measurement report mode. When PERIODICAL_R EPORTING is selected, you can infer that periodical interRAT measurement report is adopted; when EVENT_TRIGG ER is selected, you can infer that Enumeratio event-triggered n Type inter-RAT measurement report is adopted. The RNC includes two modes of the interRAT measurement report. The event triggered report and the periodical report are selected according to the inter-RAT measurement This parameter is used to increase time of inter-RAT reselection. It is Interval not configured when its value is Type 255. For detailed inforamtion, refer to 3GPP TS 25.304.

文档密级:

Inter-RAT InterRatRepor report mode tMode

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)

PERIODIC AL_REPO RTING(Peri odical reporting), EVENT_T RIGGER(E vent trigger)

PERIODIC AL_REPO RTING,EV ENT_TRIG GER

Inter-RAT ADD InterRatTrese scaling factor CELLSELRES lScalingFacto for reselection EL(Optional) r delay

4~19,255

{1~4.75},{2 55}, step:0.25

8/7/2013

华为机密,未经许可不得扩散

第511页,共3267页

162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter RAT goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter RAT is in This parameter specifies the interval for sending packets for starting the EthOAM loopback test.

文档密级:

InterRatUlMb UL theshold drTrigThresh old

ADD CELLMBDRIN TERRAT(Optio nal)

Interval Type

0~100

0~100

INTERVAL

Send PKT Interval

STR ETHOAMLOO PTST(Optional)

Interval Type

1~10

1 to 10

8/7/2013

华为机密,未经许可不得扩散

第512页,共3267页

162734118.xls.ms_office1
This parameter specifies the Ec/No absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with QoS of basic service. The parameter affects the triggering of ADD event 1F. CELLINTRAF Event 1F is used 1F event REQHO(Option to trigger the Interval IntraAblThdF absolute EcNo al) emergency blind Type or1FEcNo threshold SET handover. If the INTRAFREQH best cell of the O(Optional) active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion

文档密级:

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第513页,共3267页

162734118.xls.ms_office1
This parameter specifies the RSCP absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with the QoS of basic service. The parameter affects the triggering of ADD event 1F. CELLINTRAF Event 1F is used 1F event REQHO(Option to trigger the Interval IntraAblThdF absolute RSCP al) emergency blind Type or1FRSCP threshold SET handover. If the INTRAFREQH best cell of the O(Optional) active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion

文档密级:

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第514页,共3267页

162734118.xls.ms_office1
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn 1 + a * Mn Here, D0, D1, Fn: the updated D2, D3, D4, ADD filtered Intra-freq D5, D6, D7, CELLINTRAF measurement 0,1,2,3,4,5,6 IntraFreqFilte meas L3 filter Enumeratio D8, D9, REQHO(Option result ,7,8,9,11,13, rCoef coeff n Type D11, D13, al) Fn - 1: the old 15,17,19 D15, D17, filtered D19 measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied.

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第515页,共3267页

162734118.xls.ms_office1

文档密级:

IntraIntraFreqLdb frequency PeriodTimerL LDB period en timer length

Identifying the period of the Intrafrequency load balance algorithm. When the cell load is SET high, the cell LDCPERIOD( PCPICH TX Optional) power can be Interval SET periodically Type SATLDCPERI reduced in order OD(Optional) to enable users in connected mode to be switched over to other cells more easily, thus reducing the local cell load.

1~86400

1~86400

8/7/2013

华为机密,未经许可不得扩散

第516页,共3267页

162734118.xls.ms_office1
Indicating whether the intrafrequency measurement control information should be delivered through the system information. Generally the cell should deliver the intra-frequency measurement control Intra-freq ADD REQUIRE, information. REQUIRE, IntraFreqMea Meas Ctrl Info CELLMEAS(O Enumeratio NOT_REQ When the intraNOT_REQ sInd Ind ptional) n Type UIRE frequency UIRE measurement control information (the preconfiguration of the measurement control) is delivered in the system, the UE can start the intrafrequency measurement and send the measurement

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第517页,共3267页

162734118.xls.ms_office1
This parameter specifies the intrafrequency measurement quantity. It defines the reference measurement quantity for the UE to report event 1x. For events 1A, 1B, 1C, and 1D which adopt relative thresholds, the measurement Enumeratio quantity does not n Type have great impact on the threshold values. For event 1F which adopts absolute threshold, the measurement quantity should be set based on the reality of the cell. If the cell is located in the center of the coverage area, the main factor that When it is checked, system supports intrafrequency neighboring detect function. DETSET_RPRT_ SWITCH switch in HoSwitch in SET CORRMALGOS Enumeratio WITCH can also n Type start the intrafrequency neighboring detect function. Either switch is checked, the RNC starts the intrafrequency neighboring detect function.

文档密级:

Intra-freq IntraFreqMea Measure sQuantity Quantity

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional)

CPICH_EC/ NO, CPICH_RS CP

CPICH_EC/ NO, CPICH_RS CP

IntraFrequency IntraFreqNCe Neighboring llDetectSwitc Cell Detect h Switch

SET NCELLDETEC TSWITCH(Opti onal)

OFF, ON

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第518页,共3267页

162734118.xls.ms_office1
Relative threshold of the event 1A. The greater the value of this parameter is, the more easily the event 1A is triggered. This parameter specifies the CS non-VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the

文档密级:

1A Event IntraRelThdF Relative or1A Threshold

SET SMLC(Mandato ry)

Interval Type

0~29

0~14.5, step: 0.5

CS non VP service 1A IntraRelThdF event relative or1ACSNVP THD

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional)

Interval Type

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第519页,共3267页

162734118.xls.ms_office1
This parameter specifies the VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. ADD For the definition CELLINTRAF of event 1A, refer VP service 1A REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1ACSVP THD SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and

文档密级:

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第520页,共3267页

162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and Relative threshold of the event 1B. The lower the value of this parameter is, the more easily the event 1B is triggered.

文档密级:

ADD CELLINTRAF PS service 1A REQHO(Option IntraRelThdF event relative al) or1APS threshold SET INTRAFREQH O(Optional)

Interval Type

0~29

0~14.5,Step :0.5

1B Event IntraRelThdF Relative or1B Threshold

SET SMLC(Mandato ry)

Interval Type

0~29

0~14.5, step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第521页,共3267页

162734118.xls.ms_office1
This parameter specifies the CS non-VP service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event ADD 1B is triggered. CELLINTRAF For the definition REQHO(Option of event 1B, refer Interval al) to 3GPP TS Type SET 25.331. INTRAFREQH The relative O(Optional) threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the

文档密级:

CS non VP service 1B IntraRelThdF event relative or1BCSNVP THD

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第522页,共3267页

162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. ADD For the definition CELLINTRAF of event 1B, refer VP service 1B REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1BCSVP THD SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and

文档密级:

0~29

0~14.5,Step :0.5

8/7/2013

华为机密,未经许可不得扩散

第523页,共3267页

162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. ADD For the definition CELLINTRAF of event 1B, refer PS service 1B REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1BPS threshold SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and

文档密级:

0~29

0~14.5,Step :0.5

IntrTmr

TinTR

CN flow control timer (long). If the OVERLOAD SET message is not Interval IUTIMERAND received in this Type NUM(Optional) period, the traffic volume will be increased by a degree.

15000~120 15000~120 000 000

8/7/2013

华为机密,未经许可不得扩散

第524页,共3267页

162734118.xls.ms_office1

文档密级:

IPADDR

IP address

This parameter LOP specifies the local IP Address VCL(Mandator IP address of an Type y) IPoA PVC.

0.0.0.0~255 .255.255.25 5

IPADDR

Local IP address

ADD ETHIP(Mandat ory) ADD DEVIP(Mandat ory) ADD IPOAPVC(Man datory) ACT VCLCC(Manda tory) ADD ETHTRKIP(Ma ndatory)

This parameter specifies the local IP Address IP address of the Type Ethernet port.

0.0.0.0~255 .255.255.25 5

IPADDR

Next Hop IP Address

ADD This parameter IP Address VLANID(Mand specifies the next Type atory) hop IP address.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第525页,共3267页

162734118.xls.ms_office1

文档密级:

IPADDR

Local IP address

Local IP address. It must be addresses ADD configured on IP Address IPPATH(Manda RNC (including Type tory) interface board's device IP and port IP) .

0.0.0.0~255 .255.255.25 5

IPHC

Head compress

It specifies whether to enable ADD No_HC, the IP header PPPLNK(Optio Enumeratio UDP/IP_H compression nal) n Type C function on the PPP link.

No_HC(Dis able head compress), UDP/IP_H C(Use UDP/IP head compress)

8/7/2013

华为机密,未经许可不得扩散

第526页,共3267页

162734118.xls.ms_office1

文档密级:

IPHC

Head compress

This parameter specifies whether ADD No_HC, to enable the IP MPGRP(Option Enumeratio UDP/IP_H head compression al) n Type C function of a PPP link.

No_HC(Dis able head compress), UDP/IP_H C(Use UDP/IP head compress)

IPINDEX

IP address index

ADD ETHIP(Mandat ory) ADD ETHTRKIP(Ma ndatory)

This parameter specifies the index of the secondary IP address for the Ethernet port.

Interval Type

1~5

1 to 5

8/7/2013

华为机密,未经许可不得扩散

第527页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter Whether ADD specifies whether IPLOGPORT Binding logical NODEBIP(Man Enumeratio NO, YES to bind the logical FLAG port or not datory) n Type port.

NO(Not binding), YES(Bindin g).

8/7/2013

华为机密,未经许可不得扩散

第528页,共3267页

162734118.xls.ms_office1

文档密级:

IPLPN

This parameter ADD specifies the Logic port No. NODEBIP(Man logical port datory) number the NodeB IP stack.

Interval Type

0~119

0 to 119

IPSN

NodeB IP_TRANS Slot No.

This parameter ADD specifies the Interval NODEBIP(Man number of the slot Type datory) bearing NodeB IP transport.

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第529页,共3267页

162734118.xls.ms_office1

文档密级:

IPSRN

NodeB IP_TRANS Subrack No.

This parameter specifies the ADD number of the NODEBIP(Man subrack bearing datory) NodeB IP transport.

Interval Type

0~5

0 to 5

Indicating ADD whether the Iub IP Trans Apart IPTRANSAP NODEB(Manda interface supports Enumeratio Ind ARTIND tory) IP hybrid n Type transport.

SUPPORT( SUPPORT, Support), NOT_SUPP NOT_SUPP ORT ORT(Not support)

8/7/2013

华为机密,未经许可不得扩散

第530页,共3267页

162734118.xls.ms_office1

文档密级:

IPTYPE

IP address type

ADD ETHIP(Mandat ory) ADD ETHTRKIP(Ma ndatory)

This parameter specifies whether an IP address is a Enumeratio PRIMARY, PRIMARY, primary or n Type SECOND SECOND secondary IP address.

Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access to the radio network. ADD The UE judges Access class 0 BARRED, BARRED, CELLACCESS whether it IsAccessClass barred Enumeratio NOT_BAR NOT_BAR STRICT(Option belongs to this 0Barred indicator n Type RED RED al) access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

8/7/2013

华为机密,未经许可不得扩散

第531页,共3267页

162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 10 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 11 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 12 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

Access class IsAccessClass 10 barred 10Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

Access class IsAccessClass 11 barred 11Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

Access class IsAccessClass 12 barred 12Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

8/7/2013

华为机密,未经许可不得扩散

第532页,共3267页

162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 13 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 14 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 15 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

Access class IsAccessClass 13 barred 13Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

Access class IsAccessClass 14 barred 14Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

Access class IsAccessClass 15 barred 15Barred indicator

ADD CELLACCESS STRICT(Option al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

8/7/2013

华为机密,未经许可不得扩散

第533页,共3267页

162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 1 can be allowed to initate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 2 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 3 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

ADD Access class 1 CELLACCESS IsAccessClass barred STRICT(Option 1Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 2 CELLACCESS IsAccessClass barred STRICT(Option 2Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 3 CELLACCESS IsAccessClass barred STRICT(Option 3Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

8/7/2013

华为机密,未经许可不得扩散

第534页,共3267页

162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 4 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 5 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 6 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

ADD Access class 4 CELLACCESS IsAccessClass barred STRICT(Option 4Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 5 CELLACCESS IsAccessClass barred STRICT(Option 5Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 6 CELLACCESS IsAccessClass barred STRICT(Option 6Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

8/7/2013

华为机密,未经许可不得扩散

第535页,共3267页

162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 7 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 8 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 9 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.

文档密级:

ADD Access class 7 CELLACCESS IsAccessClass barred STRICT(Option 7Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 8 CELLACCESS IsAccessClass barred STRICT(Option 8Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

ADD Access class 9 CELLACCESS IsAccessClass barred STRICT(Option 9Barred indicator al)

BARRED, BARRED, Enumeratio NOT_BAR NOT_BAR n Type RED RED

8/7/2013

华为机密,未经许可不得扩散

第536页,共3267页

162734118.xls.ms_office1
This parameter specifies whether ACT the EtherOAM ETHOAMAH( frame carries the Enumeratio NO, YES Optional) flag indicating the n Type active or standby role of a port. ADD Is first class RSCGRP(Mand transport resource Enumeratio NO, YES atory) group. n Type This parameter specifies whether the MAC-hs window size is fixed. - If this parameter ADD is set to TRUE, NODEBLMTP the MAC-hs ARA(Optional) window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size is flexible. This parameter specifies the flag of the primary operator. "YES" indicates that the ACT license of the LICENSE(Opti primary operator onal) is to be activated, "NO" indicates that the license of the secondary operator is to be activated.

文档密级:

Carry port ISCARRYM master flag or ASTERFLG not

NO,YES

Is First Class Transport ISFIRSTCLA Resource SS Group

NO, YES

Is MAC-hs IsFixedMachs window size WinSize fixed or not

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

Primary ISPRIMARY Operator Flag PLMN

Enumeratio NO, YES n Type

NO,YES

This parameter NO(NOT ACT specifies whether QOSPATH) ISQOSPATH IS QOSPATH IPPM(Mandator Enumeratio NO,YES to select a QoS , YES(IS y) n Type path. QOSPATH)

8/7/2013

华为机密,未经许可不得扩散

第537页,共3267页

162734118.xls.ms_office1

文档密级:

IsROOTNOD Is Root Node E

To determine whether the node ADD is root node when ADJNODE(Ma Enumeratio NO, YES Transport Type is ndatory) n Type ATM or ATM_IP.

NO, YES

ITFT

ADD TRMMAP(Man datory) ADD Interface Type ADJMAP(Man Interface type. datory) ADD IPPATH(Manda tory)

IUB, IUR, Enumeratio IUB,IUR,IU IUCS, IUPS n Type CS,IUPS

8/7/2013

华为机密,未经许可不得扩散

第538页,共3267页

162734118.xls.ms_office1
When the Iu interface is faulty, the RNC gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enables cell access in Not Bar mode. This AC SET parameter defines Restriction Interval ACALGO(Opti the interval Interval of Cell Type onal) between the cell By IU working in Bar mode and in Not Bar mode. In this way, the location update procedure can be distributed to a specified time period and the risk due to congestion is reduced.

文档密级:

IuAcInterval OfCell

1~3600

1~3600

DL OLC ADD Number of RABs Interval IubDlOlcRel released RAB NODEBOLC(O selected in one Type RabNum number ptional) DL traffic release.

0~10

0~10

UL OLC ADD Number of RABs Interval IubUlOlcRel released RAB NODEBOLC(O selected in one Type RabNum number ptional) UL traffic release.

0~10

0~10

Iu CS Release SET A timer to Iu CS Interval IuCSRelNoR protection STATETIMER( Release Type ABTmr timer Optional) protection.

1~65535

1~65535

Iu PS Release SET A timer to Iu PS Interval IuPSRelNoR protection STATETIMER( Release Type ABTmr timer Optional) protection.

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第539页,共3267页

162734118.xls.ms_office1
Indicating whether to Congestion ADD support Control IurCongCtrlS NRNC(Optional congestion Indicator over uppInd ) control over Iur IUR for NRNC interface of the neighboring

文档密级:

Enumeratio OFF, ON n Type

OFF, ON

IurExistInd

Indicating IUR Interface ADD whether to config TRUE, Existing NRNC(Mandat neighbouring Enumeratio FALSE Indication ory) RNC's DSP n Type index.

TRUE, FALSE

Indicating whether to Hsdpa cap ind ADD support Hsdpa IurHsdpaSup over IUR for NRNC(Optional over Iur interface pInd NRNC ) of the neighboring RNC. Indicating whether to Hsupa cap ind ADD support Hsupa IurHsupaSup over IUR for NRNC(Optional over Iur interface pInd NRNC ) of the neighboring RNC. Iu signaling RST connection IU signalling IUSIGCONN IURESOURCE( identifier Id ID Mandatory) allocated by RNC for the user.

Enumeratio OFF, ON n Type

OFF, ON

Enumeratio OFF, ON n Type

OFF, ON

Interval Type

0~1677721 0~1677721 5 5

8/7/2013

华为机密,未经许可不得扩散

第540页,共3267页

162734118.xls.ms_office1
How the RNC state is affected by the Iu interface service state. If the value is NONE, the RNC state is independent of the Iu interface state(faulty or recovery). If the value is IUCS, the RNC state is considered to be ADD Iu State Policy faulty when Iu CS IuStatePolicy RNCPOOL(Opt For RncPool interface is faulty. ForPool ional) If the value is IUPS, the RNC state is considered to be faulty when Iu PS interface is faulty. If the value is IUCS_IUPS, the RNC state is considered to be faulty when IU CS and IU PS interface are faulty. When IU CS or IU PS This parameter specifies the expected RX type of J0. The setting J0 expected SET of the expected J0RXT incept type OPT(Optional) RX byte must be consistent with that of the TX byte at the peer end.

文档密级:

NONE, IUCS, NONE,IUC Enumeratio IUPS, S,IUPS,IUC n Type IUCS_IUPS S_IUPS

NULL, 1byte, Enumeratio 16byte, n Type 64byte

NULL, 1 byte, 16 byte, 64 byte

8/7/2013

华为机密,未经许可不得扩散

第541页,共3267页

162734118.xls.ms_office1

文档密级:

J0 expected J0RXVALUE incept value

This parameter specifies the expected RX value of J0. The setting of the SET expected RX byte String Type OPT(Optional) must be consistent with that of the TX byte at the peer end.

None

J0TXT

J0 transmit type

This parameter specifies the TX type of J0. The NULL, setting of the TX SET 1byte, byte must be Enumeratio OPT(Optional) 16byte, consistent with n Type 64byte that of the expected RX byte at the peer end.

NULL, 1 byte, 16 byte, 64 byte

J0 transmit J0TXVALUE value

This parameter specifies the TX value of J0. The setting of the TX SET byte must be String Type OPT(Optional) consistent with that of the expected RX byte at the peer end.

None

J1RXT

J1 expected incept type

This parameter specifies the expected RX type NULL, of J1. The setting SET 1byte, of the expected Enumeratio OPT(Optional) RX byte must be 16byte, n Type 64byte consistent with that of the TX byte at the peer end.

NULL,1byt e,16byte,64 byte

8/7/2013

华为机密,未经许可不得扩散

第542页,共3267页

162734118.xls.ms_office1

文档密级:

J1 expected J1RXVALUE incept value

This parameter specifies the expected RX value of J1. The setting of the SET expected RX byte String Type OPT(Optional) must be consistent with that of the TX byte at the peer end.

None

J1TXT

J1 transmit type

This parameter specifies the TX type of J1. The NULL, setting of the TX SET 1byte, byte must be Enumeratio OPT(Optional) 16byte, consistent with n Type 64byte that of the expected RX byte at the peer end.

NULL, 1 byte, 16 byte, 64 byte

J1 transmit J1TXVALUE value

This parameter specifies the TX value of J1. The setting of the TX SET byte must be String Type OPT(Optional) consistent with that of the expected RX byte at the peer end.

None

8/7/2013

华为机密,未经许可不得扩散

第543页,共3267页

162734118.xls.ms_office1

文档密级:

J2RXT

This parameter specifies the expected J2 RX type. The setting SET NULL, J2 hope incept of the expected COPTLNK(Opt Enumeratio 16byte, type RX byte must be ional) n Type 64byte consistent with that of the TX byte at the peer end.

NULL, 16 byte, 64 byte

This parameter SET J2 hope incept specifies the COPTLNK(Opt J2RXVALUE value expected J2 RX ional) value.

String Type -

1~62 characters

J2TXT

J2 transmit type

This parameter specifies the J2 TX type. The SET setting of the TX NULL, COPTLNK(Opt byte must be Enumeratio 16byte, ional) consistent with n Type 64byte that of the expected RX byte at the peer end.

NULL, 16 byte, 64 byte

8/7/2013

华为机密,未经许可不得扩散

第544页,共3267页

162734118.xls.ms_office1

文档密级:

J2 transmit J2TXVALUE value

SET This parameter COPTLNK(Opt specifies the J2 ional) transmit value.

String Type -

1~62 characters

K2MODE

K2 Mode

This parameter NOTNOTspecifies whether INDICATE- INDICATEthe K2 byte has SET Enumeratio END, END, the MSP(Optional) INDICATE- INDICATEbidirectional/unid n Type END END irectional end or not.

KEEPTMR

Timer of waiting ADD Timer_Keepfor STAT Interval SAALLNK(Opt Alive response from the Type ional) peer end.

UNI: 1000~3000 100~1200,1 NNI: 000~3000 100~1200

KEYCHK

This parameter specifies whether the check is a key detect. If the check is a key detect, the check STR Key detect or result may affect IPCHK(Mandat Enumeratio NO, YES not the fault handling ory) n Type of the port. Otherwise, the check result does not affect the fault handling of the port.

YES,NO

The period of SET KPI alarm Period of KPI KpiAlarmChk KPIALMTHD( check,it's the Alarm Check Times Optional) times of KPI report period.

D1, D2, D1,D2,D3, D3, D4, D5, Enumeratio D4,D5,D6, D6, D7, D8, n Type D7,D8,D9, D9, D10 D10

8/7/2013

华为机密,未经许可不得扩散

第545页,共3267页

162734118.xls.ms_office1

文档密级:

RNC Report KpiAlarmSwi KPI Alarm tch Switch

SET RNC peport KPI KPIALMTHD( Enumeratio OFF, ON alarm switch. Optional) n Type

OFF, ON

LAC

ADD LAC(Mandator y) ADD RAC(Mandator y) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) Location area ADD code SAC(Mandatory ) ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory) ADD CZ(Mandatory) ADD LASNAMAP( Mandatory)

Identifying a location area code for a PLMN. It is defined by the operator. For Interval detailed Type information of this parameter, refer to 3GPP TS 23.003.

{1~65533}, 1~65533,65 {65535} 535

LATITUDE

GPS antenna latitude

This parameter specifies the antenna latitude of the GPS ADD reference Interval GPS(Mandatory receiver. The Type ) latitude is expressed in the form of degree:minute:sec ond.

-90000000 90000000~ to 90000000 90000000

8/7/2013

华为机密,未经许可不得扩散

第546页,共3267页

162734118.xls.ms_office1
This parameter specifies the antenna latitude of the GPS ADD reference GPS(Mandatory receiver. The String Type ) latitude is expressed in the form of degree:minute:sec ond.

文档密级:

GPS antenna LATITUDES latitude EC

90:00:00.00 0~90:00:00. 000

LATPRD

This parameter ADD Delay measure specifies the Interval IPLOGICPORT period period of Type (Optional) measuring delay.

1~100

100~10000 step:100

This parameter specifies the ADD Delay adjust number of periods Interval LATSUSTM IPLOGICPORT suspend period that delay Type (Optional) adjustment suspends.

0~100

0~100

LATTH

Rate down threshold for delay

This parameter ADD specifies the IPLOGICPORT threshold of rate (Optional) down delay.

Interval Type

0~10000

0~10000

8/7/2013

华为机密,未经许可不得扩散

第547页,共3267页

162734118.xls.ms_office1

文档密级:

LATUDK

This parameter average delay ADD specifies the filter Interval down filter IPLOGICPORT mantissa of Type mantissa (Optional) average delay decrease.

0~15

0~15

LATUPK

This parameter average delay ADD specifies the filter Interval up filter IPLOGICPORT mantissa of Type mantissa (Optional) average delay increase.

0~15

0~15

LCARRYT

Low bearing type

This parameter specifies the type ADD UNI, IMA, UNI, IMA, of link that carries VPCLCX(Mand Enumeratio FRAATM, FRAATM, the low-end atory) n Type NCOPT NCOPT VPL/VCL cross connection. SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of intraType frequency load balancing (LDB).

LDB LdbAvgFilter smoothing Len filter length

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第548页,共3267页

162734118.xls.ms_office1
This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downlink none-HSDPA power is used for services carried on DCH, and downlink HSDPA guarantee power SET is used for DRD(Optional) Power, Load balance services carried LdbDRDchoi ADD Enumeratio UserNumbe UserNumbe DRD choice on HSce CELLDRD(Opt n Type r, Power r DSCH)will be ional) applied to the load balancing DRD algorithm. - UserNumber: User number(Downlink R99 equivalent user number is used for services carried on DCH, and downlink HSDPA user number is used for services

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第549页,共3267页

162734118.xls.ms_office1

文档密级:

Dl load balance DRD LdbDRDLoad power remain RemainThdD threshold for CH DCH

This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on DCH. SET The load DRD(Optional) balancing DRD ADD will probably be CELLDRD(Opt triggered only ional) when the downlink cell remanent non H power or remanent R99 equivalent user number is less than this threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第550页,共3267页

162734118.xls.ms_office1

文档密级:

Dl load balance DRD LdbDRDLoad power remain RemainThdH threshold for SDPA HSDPA

This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on HSSET DSCH. The load DRD(Optional) balancing DRD Interval ADD will probably be Type CELLDRD(Opt triggered only ional) when the downlink cell remanent HSDPA guarantee power or remanent HSDPA user number is less than this threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第551页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for DCH users. Only when the remanent load offset reaches this threshold can a neighboring cell Load balance SET be selected as a Interval LdbDRDOffs DRD offset for DRD(Optional) candidate DRD Type etDCH DCH cell for DCH users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD Total Power

文档密级:

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第552页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for HSDPA users. Only when the remanent load offset reaches this threshold can a Load balance SET neighboring cell Interval LdbDRDOffs DRD offset for DRD(Optional) be selected as a Type etHSDPA HSDPA candidate DRD cell for HSDPA users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD

文档密级:

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第553页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on DCH. - ON: The load balancing DRD SET algorithm will be Load balance DRD(Optional) applied.(If cellLdbDRDSwit DRD switch ADD level DRD Enumeratio ON, OFF chDCH for DCH CELLDRD(Opt parameters are n Type ional) configured, the status of cell level Load balance DRD switch for DCH should also be considered.) - OFF: The load balancing DRD algorithm will not be applied.

ON, OFF

8/7/2013

华为机密,未经许可不得扩散

第554页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on HS-DSCH. - ON: The load balancing DRD algorithm will be SET applied.(If cellLoad balance DRD(Optional) level DRD LdbDRDSwit DRD switch ADD Enumeratio ON, OFF parameters are chHSDPA for HSDPA CELLDRD(Opt n Type configured, the ional) status of cell level Load balance DRD switch for HSDPA should also be considered.) - OFF: The load balancing DRD algorithm will not be applied.

ON, OFF

This parameter specifies the threshold of the downlink remanent total power difference between the current cell and the target cell when load balancing DRD is Load balance applied and the DRD total SET Interval LdbDRDTota load balancing power protect DRD(Optional) Type lPwrProThd DRD choice is threshold Power. Only when the downlink remanent total power difference is less than this threshold can a neighboring cell be selected as a candidate DRD cell.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第555页,共3267页

162734118.xls.ms_office1
Value range: NODEB_CREDI T_LDR_SWITC H (NodeB Credit LDR Switch), LCG_CREDIT_L DR_SWITCH (Local Cell Group Credit LDR Switch), LC_CREDIT_LD R_SWITCH (Local Cell Credit LDR Switch) Content: The SET values above LDCALGOPA represent the RA(Optional) following algorithms: NODEB_CREDI T_LDR_SWITC H: NodeB credit congestion control algorithm. This is an RNCoriented algorithm. When NodeB creadit load is heavy, the load can be reshuffled through BE FALSE means not considering the code priority during the code reshuffling. TRUE means considering the code priority during the code reshuffling. If the ADD parameter is CELLLDR(Opti TRUE, the codes onal) with high priority are reserved during the code reshuffling. It is good for the code resource dynamic sharing, which is a function used for the HSDPA service.

文档密级:

LdcSwitch

load control algorithm switch

Bit Field Type

NODEB_C REDIT_LD R_SWITCH (NodeB Credit LDR Switch), LCG_CRE DIT_LDR_ SWITCH(L ocal Cell Group Credit LDR Switch), LC_CREDI T_LDR_S WITCH(Lo cal Cell Credit LDR Switch)

NODEB_C REDIT_LD R_SWITCH ,LCG_CRE DIT_LDR_ SWITCH,L C_CREDIT _LDR_SWI TCH

LDR code LdrCodePriU priority seInd indicator

FALSE(FA FALSE, Enumeratio LSE), TRUE n Type TRUE(TRU E)

8/7/2013

华为机密,未经许可不得扩散

第556页,共3267页

162734118.xls.ms_office1
Code resource usage difference threshold. Interfrequency handover is triggered when the difference of the resource usage of the current cell and that of the target cell is greater than this threshold. The smaller this InterFreq HO ADD parameter value, Interval LdrCodeUsed code used ratio CELLLDR(Opti the easier it is to Type SpaceThd space threshold onal) find the qualified target cell for blind handover. Excessively small values of the parameter, however makes the target cell easily enters the congestion status. The higher the parameter value, the more difficult it is for the interfrequency blind

文档密级:

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第557页,共3267页

162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the first priority. reshuffling), IUBLDR refers to CODELDR processing of (Code load SET IUBLDR,C LDR action reshuffling), LDCALGOPA Enumeratio ODELDR,U trigged by Iub UULDR(Uu RA(Optional) n Type ULDR,CRE bandwidth. load DITLDR CREDITLDR reshuffling), refers to CREDITLD processing of R(Credit LDR action load trigged by credit. reshuffling) CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.

文档密级:

LdrFirstPri

first priority for load reshuffling

8/7/2013

华为机密,未经许可不得扩散

第558页,共3267页

162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the fourth reshuffling), priority. CODELDR IUBLDR refers to (Code load fourth priority SET IUBLDR,C processing of reshuffling), LdrFourthPri for load LDCALGOPA LDR action Enumeratio ODELDR,U UULDR(Uu reshuffling RA(Optional) trigged by Iub n Type ULDR,CRE load DITLDR bandwidth. reshuffling), CREDITLDR CREDITLD refers to R(Credit processing of load LDR action reshuffling) trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第559页,共3267页

162734118.xls.ms_office1
Identifying the period of the LDR execution. When basic congestion occurs, execution of LDR can dynamically reduce the cell load. The lower the parameter value is, the more frequently the SET LDR action is LDCPERIOD( executed, which Optional) decreases the load Interval SET quickly. If the Type SATLDCPERI parameter value is OD(Optional) excessively low, an LDR action may overlap the previous one before the previous result is displayed in LDM. The higher the parameter value is, the more likely this problem can be prevented. If the parameter value is

文档密级:

LDR period LdrPeriodTim timer length erLen

1~86400

1~86400

8/7/2013

华为机密,未经许可不得扩散

第560页,共3267页

162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the second reshuffling), priority. CODELDR IUBLDR refers to (Code load second priority SET IUBLDR,C processing of reshuffling), for load LDCALGOPA LDR action Enumeratio ODELDR,U LdrSecondPri UULDR(Uu reshuffling RA(Optional) trigged by Iub n Type ULDR,CRE load DITLDR bandwidth. reshuffling), CREDITLDR CREDITLD refers to R(Credit processing of load LDR action reshuffling) trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第561页,共3267页

162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the third priority. reshuffling), IUBLDR refers to CODELDR processing of (Code load SET IUBLDR,C LDR action reshuffling), LDCALGOPA Enumeratio ODELDR,U trigged by Iub UULDR(Uu RA(Optional) n Type ULDR,CRE bandwidth. load DITLDR CREDITLDR reshuffling), refers to CREDITLD processing of R(Credit LDR action load trigged by credit. reshuffling) CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.

文档密级:

LdrThirdPri

third priority for load reshuffling

LEI

Path Load EQ ADD Path Load EQ Threshold LOADEQ(Man threshold Table Table Index datory) Index.

Interval Type

1~63

1~63

8/7/2013

华为机密,未经许可不得扩散

第562页,共3267页

162734118.xls.ms_office1

文档密级:

LEIBRZ

Index of the load ADD EQ used by the Bronze user Interval ADJMAP(Man current adjacent Load EQ index Type datory) node's bronze user.

0~63

0~63

LEIGLD

Index of the load ADD Gold user EQ used by the Interval ADJMAP(Man Load EQ index current adjacent Type datory) node's gold user.

0~63

0~63

LEISLV

Index of the load ADD Silver user EQ used by the Interval ADJMAP(Man Load EQ index current adjacent Type datory) node's silver user.

0~63

0~63

LENO

Local entity No.

ADD M3LE(Mandato ry) ADD M3DE(Mandato ry)

M3UA local entity indexes and M3UA local Interval entity have a one- Type to-one correspondence.

0~118

0~118

8/7/2013

华为机密,未经许可不得扩散

第563页,共3267页

162734118.xls.ms_office1

文档密级:

LEVEL

Alarm mask switch

This parameter SET specifies the ALMML(Mand status of the atory) alarm mask switch.

Enumeratio ON, OFF n Type

ON,OFF

This parameter ADD specifies the LEVEL MD Level ETHMD(Option priority level of al) an MD. This parameter specifies the number of the Fractional link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For Low ADD the AOUa in E1 LFRAATML FRAATM link VPCLCX(Optio transmission NKN No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured.

Interval Type

0~7

0 to 7

Interval Type

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第564页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter LOD Logic function specifies the LGCAPPTYP PATCH(Option type logical function E al) type.

UCP, RUCP, UCP,RUCP Enumeratio UUP, ATM, ,UUP,ATM, n Type IP IP

This parameter specifies the logical function type. UCP:UMTS RNC Control UCP, plane Process Logic function ADD RUCP, UCP,RUCP LGCAPPTYP RUCP:Resource Enumeratio type BRD(Optional) UUP, ATM, ,UUP,ATM, E Management and n Type IP IP UMTS RNC Control plane Process UUP:UMTS RNC User plane Process. SET This parameter Logic function LGCAPPTYP OPT(Mandatory specifies the logic Enumeratio ATM, IP type E ) function type. n Type ATM,IP

8/7/2013

华为机密,未经许可不得扩散

第565页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of the IMA group corresponding to the low-end port. ADD For the AEUa, the VPCLCX(Optio number ranges nal) from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured. DL SF threshold to limit CM. When DL SF limit CM indicator is TRUE, if the downlink spreading factor is less than or equal to this parameter value, SET the active set CMCF(Mandat quality ory) measurement is not allowed and CM function should be deactivated.When DL SF limit CM ind is TRUE, if CM is activated, the downlink spreading factor should be greater than this

文档密级:

LIMAGRPN

Low IMA group No.

Interval Type

0~83

0 to 83

Dl SF LimitCMDlS threshold to FThd limit CM

D8, D16, Enumeratio D32, D64, 8,16,32,64,1 n Type D128, D256 28,256

8/7/2013

华为机密,未经许可不得扩散

第566页,共3267页

162734118.xls.ms_office1
When the BE service rate of the UE decreases to the DCCC threshold rate, the UE, however, cannot be changed to the FACH state because, for example, the state transition switch is OFF or there are CS services. D0, D8, In this case, when 0, 8, 16, 32, SET D16, D32, traffic remains 64, 128, DCCC(Optional Enumeratio D64, D128, low for quite a 144, 256, ) n Type D144, long period, the 384 D256, D384 service rate decreases to this rate and D2F state transition is not performed. The time parameters and traffic volume measurement parameters for the function of low activity rate adjustment are the same as those in This parameter SET specifies the ALMPORT(Opt String Type 0~9Charact lower limit of the ional) ers alarm.

文档密级:

Low Activity Bit Rate LittleRateThd Threshold

LL

Lower Limit

8/7/2013

华为机密,未经许可不得扩散

第567页,共3267页

162734118.xls.ms_office1

文档密级:

LNKCODE

Line code

This parameter specifies the coding scheme of the line. 1. HDB3 and AMI are B8ZS(B8ZS applicable to E1 ), links, and B8ZS SET HDB3(HD and AMI_ZCS Enumeratio E1T1(Optional) B3), are applicable to n Type AMI(AMI), T1 links. AMI_ZCS( 2. The setting of AMI_ZCS) this parameter should be consistent with that at the peer end.

B8ZS, HDB3, AMI, AMI_ZCS

8/7/2013

华为机密,未经许可不得扩散

第568页,共3267页

162734118.xls.ms_office1

文档密级:

LNKN

Link No.

SET E1T1LOP(Opti onal) LOP E1T1(Optional) STR E1T1TST(Optio nal) SET E1T1(Optional) SET COPTLNK(Ma ndatory)

This parameter specifies the number of an E1/T1 link. This parameter specifies the number of a link. For the AEUa or PEUa, the value ranges from 0 to Interval 31. For the AOUa Type in E1 mode, the value ranges from 0 to 125; for the AOUa in T1 mode, the value ranges from 0 to 167. For the POUa, the value ranges from 0 to 167.

0~167

0 to 167

Initial bearing ADD Link work LNKREDFL traffic active M3LNK(Option mode,Reference AG tag al) to RFC4666.

M3UA_MA STER_MO Enumeratio D, n Type M3UA_SL AVE_MOD

M3UA_MA STER_MO D, M3UA_SL AVE_MOD (For definitions of the two modes, refer to RFC4666.)

8/7/2013

华为机密,未经许可不得扩散

第569页,共3267页

162734118.xls.ms_office1

文档密级:

Used for MTP3 link load sharing. Suppose that the number of 1s in the value is expressed as n. Then the the B0000, maximum number B0001, of the MTP3 links B0010, for load sharing is B0011, 2^n. For example, B0100, ADD B0000 indicates B0101, MTP3LKS(Opti that only one B0110, Signalling link onal) MTP3 link can be B0111, LNKSLSMA Enumeratio mask ADD used for load B1000, SK n Type M3LKS(Option sharing. B0001 B1001, al) and B1000 B1010, indicate that at B1011, most two MTP3 B1100, links can be used B1101, for load sharing B1110, while the others B1111 cannot. This mask AND the value of Signalling Route Mask specified by ADD N7DPC must be zero.

B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111

8/7/2013

华为机密,未经许可不得扩散

第570页,共3267页

162734118.xls.ms_office1

文档密级:

LNKT

Frame Structure

E1_DOUB LE_FRAM E(E1_DOU BLE_FRA ME), E1_CRC4_ This parameter MULTI_FR specifies the AME(E1_C frame structure. RC4_MUL SET The setting of this TI_FRAME Enumeratio E1T1(Optional) parameter should ), n Type be consistent with T1_SUPER that at the peer _FRAME(T end. 1_SUPER_ FRAME), T1_EXTEN DED_SUPE R_FRAME( T1_EXTEN DED_SUPE R_FRAME)

E1_DOUB LE_FRAM E, E1_CRC4_ MULTI_FR AME, T1_SUPER _FRAME, T1_EXTEN DED_SUPE R_FRAME

LNKT

Link type

ACT VCLCC(Manda This parameter SAALLNK, tory) specifies the type Enumeratio AAL2PAT LOP of a VCL. n Type H, VCL(Mandator IPOAPVC y)

SAALLNK, AAL2PAT H, IPOAPVC

LOCALIP

Local IP address

ADD This parameter IP Address PPPLNK(Mand specifies the local Type atory) IP address.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第571页,共3267页

162734118.xls.ms_office1

文档密级:

LOCALIP

Local IP address

This parameter ADD specifies the local IP Address MPGRP(Manda IP address for the Type tory) MLPPP group.

0.0.0.0~255 .255.255.25 5

LOCALIP

Local IP

LoCell

Local cell ID

This parameter STR specifies the IP Address IPLOPTST(Ma source IP address Type ndatory) of the IP loopback test. ADD LOCELL(Mand Uniquely atory) identifying a local ADD cell. For detailed Interval CELLSETUP( information of 0~2684354 Type Mandatory) this parameter, 55 ADD refer to 3GPP TS QUICKCELLS 25.401. ETUP(Mandato ry)

0.0.0.0~255 .255.255.25 5

0~2684354 55

LOCIP1

First local IP address

First local IP ADD address. 0 SCTPLNK(Man indicates an datory) invalid value.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第572页,共3267页

162734118.xls.ms_office1

文档密级:

LOCIP2

Second local IP address

Second local IP ADD address. 0 SCTPLNK(Opti indicates an onal) invalid value.

IP Address Type

0.0.0.0~255 .255.255.25 5

LOCPN

Local SCTP port No.

ADD Local port of the Interval SCTPLNK(Man SCTP link. Type datory)

1024~6553 1024~6553 5 5

LODCTRL

Board start load control.

LFB(Load This parameters from BAM SET specifies the load and write LODCTRL(Ma Enumeratio LFB,CL key when the flash), ndatory) n Type board is started. CL(Consult Load)

Logic Port LOGPORTF Flag LAG

This field ADD indicate whether SCTPLNK(Man the SCTP link is Enumeratio NO, YES datory) bound with logic n Type port.

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第573页,共3267页

162734118.xls.ms_office1

文档密级:

LOGPORTN O

ADD No. of the logic Interval Logic Port No. SCTPLNK(Man port of the SCTP Type datory) Link.

0~119

0~119

Logic Port LOGPORTS Slot No. N

ADD Slot No. of the SCTPLNK(Man logic port of the datory) SCTP link.

Interval Type

14~27

14~27

GPS antenna LONGITUD longitude E

GPS antenna LONGITUD longitude ESEC

This parameter specifies the antenna longitude of the GPS ADD reference Interval GPS(Mandatory receiver. The Type ) longitude is expressed in the form of degree:minute:sec ond. This parameter specifies the antenna longitude of the GPS ADD reference GPS(Mandatory receiver. The String Type ) latitude is expressed in the form of degree:minute:sec ond.

180000000 180000000 ~18000000 to 0 180000000

-

180:00:00.0 00~180:00: 00.000

8/7/2013

华为机密,未经许可不得扩散

第574页,共3267页

162734118.xls.ms_office1

文档密级:

LOPT

Loop type

SET E1T1LOP(Man This parameter datory) specifies the SET loopback type. OPTLOP(Mand atory)

NO_LOOP( No loop), REMOTE_ Enumeratio LOOP(Rem n Type ote loop), LOCAL_L OOP(Local loop)

NO_LOOP, REMOTE_ LOOP, LOCAL_L OOP

LOSTSUST M

This parameter specifies the ADD Lost adjust number of periods Interval IPLOGICPORT suspend period that packet loss Type (Optional) rate adjustment suspends.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第575页,共3267页

162734118.xls.ms_office1

文档密级:

LPN

This parameter specifies the ADD Low NCOPT number of the Interval VPCLCX(Optio port No. optical port Type nal) corresponding to the low-end port.

0~3

0 to 3

LPN

ADD IPLOGICPORT (Mandatory) Logic port No. ADD IPPATH(Manda tory)

This parameter specifies the number of a logical port.

Interval Type

0~119

0~119

LPN

The Logical Port Number

This parameter ADD specifies the ATMLOGICPO number of a RT(Optional) logical port.

Interval Type

0~447

AEUa (0~191) 0~127 is Leaf logical port,128~19 1 is Hub logical port. AOUa (0~383) 0~255 is Leaf logical port,256~38 3 is Hub logical port. UOIa (0~447) 0~383 is Leaf logical port,384~44 7 is Hub logical port.

8/7/2013

华为机密,未经许可不得扩散

第576页,共3267页

162734118.xls.ms_office1

文档密级:

LPNSN

ADD Slot No. of the IP IP Logic Port Interval IPPATH(Manda logic port of the Slot No. Type tory) IP Path.

14~27

14~27

LPNTYPE

Type of the logical port

This parameter specifies the type of the logical ADD port. Only the ATMLOGICPO logical port on the Enumeratio Hub, Leaf RT(Mandatory) leaf node can n Type carry the SAAL link, AAL2 path, and IPoA PVC.

Hub, Leaf

LS

Link select

This parameter specifies whether ALL(Select to select all the all links), SET ALL, E1/T1 links Enumeratio SINGLE(Se E1T1(Optional) SINGLE carried on the n Type lect one board or a single link) link.

LS

Link select

This parameter specifies whether ALL(Select to select all the all links), E1/T1 links PORT(Sele SET ALL, carried on a ct one port COPTLNK(Ma Enumeratio PORT, board, all the links), ndatory) n Type SINGLE E1/T1 links SINGLE(Se carried on a port, lect one or a single E1/T1 link) link.

8/7/2013

华为机密,未经许可不得扩散

第577页,共3267页

162734118.xls.ms_office1

文档密级:

LSN

Low slot No.

This parameter specifies the ADD number of the slot Interval VPCLCX(Mand in which the lowType atory) end port carries the VPL/VCL cross connection.

14~27

14 to 27

This parameter specifies the number of the ADD Low bearing subrack whose LSRN VPCLCX(Mand subrack No. low-end port atory) carries the VPL/VCL cross connection. This parameter specifies the number of the UNI link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For ADD the AOUa in E1 Low UNI link LUNILNKN VPCLCX(Optio transmission No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured.

Interval Type

0~5

0 to 5

Interval Type

0~167

0 to 167

LVCI

Low VCI

This parameter ADD specifies the VCI Interval VPCLCX(Optio of the low-end Type nal) VCL.

32~65535

32 to 65535

8/7/2013

华为机密,未经许可不得扩散

第578页,共3267页

162734118.xls.ms_office1
This parameter specifies the VPI ADD of the low-end Interval VPCLCX(Mand VPL/VCL. For Type atory) the VPL is cross connected, VPI cannot be 0.

文档密级:

LVPI

Low VPI

0~255

0 to 255

This parameter M3UA service SET specifies the M3UASRVP listening port SCTPSRVPOR number of the N No. T(Optional) M3UA service listening port.

Interval Type

1024~6553 1024~6553 5 5

Number of MaccPageRe page re-TX peatTimes

MAC Transmission MacDtxCycle Cycle

This parameter defines the times of retransmission of paging messages. If the times of SET retransmission DPUCFGDAT exceeds the value A(Optional) of this parameter, retransmission stops. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the DTX cycle at the MAC layer when the SET MAC layer DTXDRXPAR supports UL A(Optional) EDCH inactivity. For details, refer to the 3GPP TS 25.331 protocol.

Interval Type

0~2

0~2

D1, D4, D5, D8, Enumeratio D10, D16, n Type D20

1,4,5,8,10,1 6,20

8/7/2013

华为机密,未经许可不得扩散

第579页,共3267页

162734118.xls.ms_office1

文档密级:

MAC MacInactiveT Inactivity hreshold Threshold

This parameter specifies the period during which the EDCH is not activated. D1, D2, After the EDCH D4, D8, SET is activated, data D16, D32, DTXDRXPAR can be transmitted Enumeratio D64, D128, A(Optional) on the EDCH n Type D256, within the period D512, specified by INFINITY MacDtxCycle. For details, refer to the 3GPP TS 25.331 protocol.

1,2,4,8,16,3 2,64,128,25 6,512,INFI NITY

This parameter specifies the maximum size of PDUs transmitted Cell_FACH SET at the MAC layer MacPduMaxS L2 enhance FRC(Optional) when the UE is in izeForEFach max PDU size the CELL_FACH state in the L2 enhanced scenario. This parameter specifies the maximum size of PDUs transmitted Cell_DCH L2 MacPduMaxS SET at the MAC layer enhance max izeForL2Enha FRC(Optional) when the UE is in PDU size nce the CELL_DCH state in the L2 enhanced scenario. ADD ETHMA(Mand atory) ADD ETHMEP(Man datory) ACT This parameter MAIDX MA Index ETHCC(Manda specifies an MA. tory) PING MAC(Mandator y) TRC MAC(Mandator y)

Interval Type

4~1504

4~1504

Interval Type

4~1504

4~1504

Interval Type

0~99

0 to 99

8/7/2013

华为机密,未经许可不得扩散

第580页,共3267页

162734118.xls.ms_office1

文档密级:

MAINLINK

ADD NCP(Optional) Main link type ADD CCP(Optional)

SAAL, SCTP. SAAL(SAA For detailed L Link Type information of SAAL, Enumeratio ), this parameter, SCTP n Type SCTP(SCT refer to 3GPP TS P Link 25.430. Type) 1 to 20 characters

MANAME

MA Name

ADD This parameter ETHMA(Mand specifies the atory) name of an MA.

String Type -

MapSwitch

Service mapping strategy switch. 1) MAP_HSUPA_T TI_2MS_SWITC H: When the switch is on, 2 ms TTI is supported for HSUPA. 2) MAP_INTER_R AT_PS_IN_CHA NLE_LIMIT_SW ITCH: When the SET switch is on, the Service CORRMALGO PS services are Bit Field mapping SWITCH(Optio transmitted on the Type strategy switch nal) DCH during the 2G-to-3G handover. When the switch is not on, the PS services can be transmitted on suitable channels according to the algorithm parameter configured for the RNC during the 2G-to-3G handover.

MAP_HSU PA_TTI_2 MS_SWIT CH, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH, MAP_PS_B E_ON_E_F ACH_SWI TCH, MAP_PS_S TREAM_O N_E_FACH _SWITCH, MAP_PS_S TREAM_O N_HSDPA_ SWITCH, MAP_PS_S TREAM_O N_HSUPA_ SWITCH, MAP_SRB _6800_WH EN_RAB_ ON_HSDS CH_SWITC H

MAP_HSU PA_TTI_2 MS_SWIT CH, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH, MAP_PS_B E_ON_E_F ACH_SWI TCH, MAP_PS_S TREAM_O N_E_FACH _SWITCH, MAP_PS_S TREAM_O N_HSDPA_ SWITCH, MAP_PS_S TREAM_O N_HSUPA_ SWITCH, MAP_SRB _6800_WH EN_RAB_ ON_HSDS CH_SWITC H

8/7/2013

华为机密,未经许可不得扩散

第581页,共3267页

162734118.xls.ms_office1

文档密级:

MASK

RST SRNTI mask to SRNTI Mask IUR(Mandatory be reset. )

B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, Enumeratio B12, B13, n Type B14, B15, B16, B17, B18, B19

B1,B2, B3,B4, B5,B6, B7,B8, B9,B10, B11, B12, B13, B14, B15, B16, B17, B18, B19

MASK

Subnet mask

MASK

Subnet mask

MASK

Subnet mask

MASK

Subnet mask

MASK

Subnet mask

MASK

Subnet mask

This parameter ADD specifies the DEVIP(Mandat subnet mask of ory) the board. This parameter ADD specifies the PPPLNK(Mand subnet mask for atory) the PPP link. This parameter ADD specifies the MPGRP(Manda subnet mask for tory) the MLPPP group. This parameter ADD specifies the ETHIP(Mandat subnet mask of ory) the Ethernet port. This parameter ADD specifies the EMSIP(Mandat subnet mask of ory) the EMS. This parameter ADD specifies the ETHTRKIP(Ma subnet mask of a ndatory) trunk group.

IP Address Type

0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5

IP Address Type

IP Address Type

IP Address Type

IP Address Type

IP Address Type

8/7/2013

华为机密,未经许可不得扩散

第582页,共3267页

162734118.xls.ms_office1
The maximum allowed uplink transmit power of ADD a UE in the cell, CELLSELRES which is related to EL(Optional) Interval the network ADD Type planning. For NRNCCELL(M detailed andatory) information, refer to 3GPP TS 25.304.

文档密级:

Max allowed MaxAllowed UE UL TX UlTxPower power

-50~33

-50~33

MaxAllowed UlTxPowerIn d

MaxAntenna Range

MaxAntenna RangeImp

TRUE(Conf igure the maximum uplink This parameter power of Max allowed ADD indicates whether UE), UE UL TX NRNCCELL(O to configure the Enumeratio TRUE,FAL FALSE(Not power ind ptional) maximum TX n Type SE configure power. the maximum uplink power of UE) Maximum coverage of the cell antenna. ADD Cell Antenna This is controlled Interval SMLCCELL(O 1~100000 1~100000 Max Coverage by MTRLGY and Type ptional) valid when MET~0(metric system). This parameter specifies the maximum coverage of the ADD Cell Antenna Interval cell antenna. SMLCCELL(O 3~328080 3~328080 Max Coverage This is controlled Type ptional) by MTRLGY and valid when IMP~1(British measurement).

8/7/2013

华为机密,未经许可不得扩散

第583页,共3267页

162734118.xls.ms_office1

文档密级:

If the number of the association retransmissions exceeds the value, the association is going to be ADD deleted. And the Association Interval MAXASSOC SCTPLNK(Opti maximum number max retransfer Type RETR onal) of the association retransmissions must be greater than the maximum number of the path retransmissions. The maximum number of attempts to perform interfrequency handovers. This parameter specifies the maximum number ADD of attempts for CELLMBDRIN the RNC to Interval TERFREQ(Opti perform inter-freq Type onal) handover after inter-freq handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions.

0~254

0~254

Inter-Freq MaxAttNum DRD max attempt times

0~3

{0~3}

8/7/2013

华为机密,未经许可不得扩散

第584页,共3267页

162734118.xls.ms_office1

文档密级:

Inter-RAT MaxAttNum DRD max attempt times

This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a cellADD oriented CELLMBDRIN measurementInterval TERRAT(Optio based DRD inter- Type nal) RAT handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions. ADD TYPRABBASI C(Mandatory) ADD CELLRLPWR( Mandatory) This parameter specifies the Interval maximum bit rate Type of the typical service.

0~3

{0~3}

MaxBitRate

Max rate

0~2560000 0~2560000 00 00

MAXBW

Max bandwidth

This parameter specifies the maximum ADD bandwidth for the Interval IPLOGICPORT dynamic Type (Mandatory) bandwidth adjustment on the logical port.

1~1000

64~64000 step:64

8/7/2013

华为机密,未经许可不得扩散

第585页,共3267页

162734118.xls.ms_office1

文档密级:

Max MaxCAPSLo capability wLoad normal load

Maximum numbers of incoming calls in one second when the load is lower than the forwarding threshold. When the CPU usage is lower than the SET sharing out CTRLPLNSHA threshold and Interval REPARA(Optio overload Type nal) threshold, and call numbers in each second reach the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Maximum numbers of incoming calls in one second when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out SET threshold and CTRLPLNSHA overload Interval REPARA(Optio threshold, and Type nal) call number in one second reaches the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Maximum number of ADD Interval retransmissions SAALLNK(Opt upon expiration Type ional) of the connection control timer.

0~255

0~255

Max MaxCAPSMi capability dLoad middle load

0~255

0~255

MAXCC

MaxCC

4~8

4~8

8/7/2013

华为机密,未经许可不得扩散

第586页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum number of cells in the active set. This parameter can achieve the balance between the signal quality in the SHO area and the performance of the system. The ADD more cells the CELLINTRAF active set Max number REQHO(Option contains, the Interval MaxCellInAc of cell in active al) larger macro Type tiveSet set SET diversity gain the INTRAFREQH user obtains in the O(Optional) SHO area, and the smaller the intra-frequency interference is. But in this case, the user occupies resources of several cells, which increases the amount of data to be processed by the system and lowers Max common Max Common ADD channel priority MaxCmchPi channel FACH(Optional supported by priority ) FACH.

文档密级:

1~6

1~6

D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, 0, 1,..., 15 n Type D10, D11, D12, D13, D14, D15

Maximum MaxEcN0Val Ec/N0 Value ue

This parameter specifies the maximum value of Ec/NO in the EFACH Ec/N0 SET adjustment RACHMEASU Interval algorithm. The REPARA(Optio Type formula is y = x * nal) 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value).

0~49

-24.5~0, step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第587页,共3267页

162734118.xls.ms_office1
This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the EDCH active set for all the UEs under the RNC cannot exceed the parameter value. If the parameter SET value is too large, Interval HOCOMM(Opt a lot of resources Type ional) on the RAN side will be occupied as the same data is transferred over multiple EDCH links in macro diversity, thus affecting the system performance. If this parameter value is too small, insufficient combination gain can be achieved

文档密级:

Max number of cell in MaxEdchCell EDCH active InActiveSet set

1~4

1~4

Maximum Number of EMaxEdchRetr DCH PDU ansNum retransfer

This parameter specifies the maximum number ADD of HARQ Interval TYPRABOLPC retransmissions of Type (Mandatory) the MAC-es flow that carries this service.

0~15

0~15

Maximum MaxEFachUs EFACH user erNum number

Maximum ADD number of users Interval CELLCAC(Opti supported by the Type onal) EFACH channel.

0~48

0~48

8/7/2013

华为机密,未经许可不得扩散

第588页,共3267页

162734118.xls.ms_office1
The offset between the FACH transmit power and PCPICH transmit power in a cell.If MaxFachPower is excessively low, the UE at the cell verge fails to receive correctly the services and signaling borne over the FACH, Max transmit ADD resulting in the Interval MaxFachPow power of FACH(Optional influence on the Type er FACH ) downlink common channel coverage and the cell coverage. If MaxFachPower is excessively high, other channels are interfered, the downlink power resources are occupied, and consequently the cell capacity is influenced.

文档密级:

-350~150

-35~15, step: 0.1

ADD Maximum Maximum Frame Interval MAXFRAM IPPATH(Option Frame Length Length. Type ELEN al)

135~1031

135~1031

Maximum MaxGpsSats Num Of GPS Satellites

Maximum number of SET satellites whose Interval SMLC(Optional ephemeris can be Type ) delivered when the A-GPS method is used.

4~16

4~16

8/7/2013

华为机密,未经许可不得扩散

第589页,共3267页

162734118.xls.ms_office1
Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with services on the HSDPA channel, regardless of the number of RABs carried on the HSDPA channel. Maximum HSDPA user ADD number cannot CELLCAC(Opti exceed the onal) HSDPA capability of the NodeB product, In practice, the value can be set based on the cell type and the richness of the available HSDPA power and code resources. If the value is too low, the cell HSDPA capacity may be reduces, leading Maximum number of users supported by the HSUPA channel.The user in this parameter refers to the user with services on ADD the HSUPA CELLCAC(Opti channel, onal) regardless of the number of RABs carried on the HSUPA channel. Maximum HSUPA user number cannot exceed the

文档密级:

Maximum MaxHsdpaUs HSDPA user erNum number

Interval Type

0~100

0~100

Maximum MaxHsupaUs HSUPA user erNum number

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第590页,共3267页

162734118.xls.ms_office1
Max allowed number of continuous invalid measurement reports. For detailed information of this parameter, refer to 3GPP TS 25.433. The parameter value must be greater than or equal to the maximum length of a sub-frame for PPP multiplexing (MAXSFLEN). This parameter can also be associated with the maximum size of the MLPPP flake to control whether the frames are fragmented after the multiplexing. In addition, to enable PPP multiplexing, two or more subframes should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" (MAXMFLEN) should satisfy the

文档密级:

Max number of continuous MaxMeasCon invalid tInvalidTimes measurement

SET LDM(Optional) SET SATLDM(Opti onal)

Interval Type

2~255

2~255

ADD PPPLNK(Optio PPP mux max nal) mux-frame MAXMFLEN ADD length MPGRP(Option al)

Interval Type

1~1500

1 to 1500

8/7/2013

华为机密,未经许可不得扩散

第591页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum number of channelization codes supported by uplink Maximum ADD Interval DPDCH. The MaxNrOfUlD codes of uplink NODEBLMTP larger the value of Type pchs DPDCH ARA(Optional) this parameter, the more the available channelization codes of uplink DPDCH. Maximum ADD number of Interval SAALLNK(Opt retransmitted Type ional) PDUs during the proving.

文档密级:

1~6

1~6

MAXNRP

Max_NRP

0~10

0~10

Path max MAXPATHR retransfer ETR

If the number of the path retransmissions exceeds the value, the link is going to be deactivated automatically. ADD And the Interval SCTPLNK(Opti maximum number Type onal) of the path retransmissions must be less than the maximum number of the association retransmissions.

0~254

0~254

8/7/2013

华为机密,未经许可不得扩散

第592页,共3267页

162734118.xls.ms_office1
Maximum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and Max transmit ADD geographical MaxPCPICH power of PCPICH(Option environment, and Power PCPICH al) the cell total power. When the ratio of soft handover areas keeps the same, the downlink coverage cannot be promoted by the increase of PCPICH power. Maximum number of data that can be transmitted during a polling period.Number of ADD Max Poll Data Sequenced Data MAXPD SAALLNK(Opt Count PDUs (SD PDUs) ional) that are allowed to be transmitted during the interval between two POLL messages. Maximum queue time of users. When a user initiates a call, it joins the queue due to cell resource insufficiency. SET Max queuing This parameter MaxQueueTi QUEUEPREE time length defines the meLen MPT(Optional) maximum length of time required for queuing of a user. If cell resources are still insufficient after expiration, access fails.

文档密级:

Interval Type

-100~500

-10~50, step: 0.1

Interval Type

UNI: 25~50 25~50,250~ NNI: 500 250~500

Interval Type

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第593页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum length of the PPP subframe. If the length of the PPP frame is greater than this parameter value, the frame cannot be used for PPP multiplexing. Note that this ADD parameter value PPPLNK(Optio should not be PPP mux max nal) greater than the MAXSFLEN son-frame ADD maximum length length MPGRP(Option of the PPP al) multiframe (MAXMFLEN). In addition, to enable PPP multiplexing, two or more subframes should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" The parameter specifies the target value of the uplink load, which is decreased through HSUPA power control on the NodeB side. If Maximum ADD the parameter MaxTargetUl Target Uplink CELLHSUPA( value is set too LoadFactor load Factor Optional) low, the cell throughput will be too low. If the parameter value is set too high, it will bring much interference. For details about this parameter, refer to 3GPP TS

文档密级:

Interval Type

1~1500

1 to 1500

Interval Type

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第594页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum duration for the single point positioning. Sum of the maximum transmit power of all DL channels in a cell. It is configured in the network planning. For detailed information of this parameter, refer to 3GPP TS 25.433. The maximum UL transmit power for background service in a specific cell. It is based on the UL coverage requirement of the background service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the

文档密级:

MAXTIME

STR Maximum POSAVE(Optio time for posave nal)

Interval Type

1~24

1 to 24

ADD CELLSETUP(O Max transmit ptional) MaxTxPower power of cell ADD QUICKCELLS ETUP(Optional)

Interval Type

0~500

0~50, step: 0.1

Max UL TX power of MaxUlTxPow background erforBac service

ADD CELLCAC(Opti onal)

Interval Type

-50~33

-50~33

8/7/2013

华为机密,未经许可不得扩散

第595页,共3267页

162734118.xls.ms_office1
Maximum UL transmit power for conversational service in a specific cell. It is based on the UL coverage requirement of the conversational service designed by the network planning.The larger the value of this parameter is, Max UL TX the wider the ADD power of coverage of the Interval MaxUlTxPow CELLCAC(Opti conversational corresponding Type erforConv onal) service services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage

文档密级:

-50~33

-50~33

8/7/2013

华为机密,未经许可不得扩散

第596页,共3267页

162734118.xls.ms_office1
The maximum UL transmit power for the interactive service in a specific cell. It is based on the UL coverage requirement of the interactive service designed by the network planning.The larger the value of this parameter is, the wider the ADD coverage of the Interval CELLCAC(Opti corresponding Type onal) services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage

文档密级:

Max UL TX power of MaxUlTxPow interactive erforInt service

-50~33

-50~33

8/7/2013

华为机密,未经许可不得扩散

第597页,共3267页

162734118.xls.ms_office1
Maximum UL transmit power for the streaming service in a specific cell. It is based on the UL coverage requirement of the streaming service designed by the network planning.The larger the value of this parameter is, the wider the ADD coverage of the Interval CELLCAC(Opti corresponding Type onal) services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage

文档密级:

Max UL TX power of MaxUlTxPow streaming erforStr service

-50~33

-50~33

8/7/2013

华为机密,未经许可不得扩散

第598页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a code is no greater than the threshold. Code reshuffling has a big impact on the QoS. In addition, the reshuffled subscribers occupy two code resources during code reshuffling. Thus, the parameter should be set to a comparatively low value. Priority identifier of MBDR cells. TRUE indicates that the MBDR cell priority is valid in the celloriented measurementbased DRD algorithm, and the cell can be considered as the measurement object. FALSE indicates that the MBDR cell priority is invalid.

文档密级:

Max user MaxUserNum number of CodeAdj code adjust

ADD CELLLDR(Opti onal)

Interval Type

1~3

1~3

MBDRFlag

ADD INTERFREQN The flag of the CELL(Optional) MBDR ADD GSMNCELL(O ptional)

FALSE(Do not send), Enumeratio FALSE,TR TRUE(Send n Type UE )

8/7/2013

华为机密,未经许可不得扩散

第599页,共3267页

162734118.xls.ms_office1
Priority of MBDR cells. The priority that corresponds to the MBDR cell is valid only when the MBDRFlag parameter is set to TRUE. The lower the priority, the easier it is for the MBDR cell to be delivered as the measurement object. For example, it is more possible for a MBDR cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. This parameter specifies the index of the BFD. The check index is unique. If the check index is not specified, a unique value ranging from 0 to 31 is automatically allocated.

文档密级:

MBDRPrio

ADD INTERFREQN The priority of CELL(Optional) MBDR ADD neighbor cell GSMNCELL(O ptional)

Interval Type

0~15

0~15

ADD Check Check IPRTBIND(Ma MBFDCHKN Index ndatory)

Interval Type

0~31

0 to 31

Multi hop MBFDLOCA BFD detect LIP local ip

This parameter STR specifies the local IP Address IPCHK(Mandat IP address of the Type ory) multi-hop BFD.

0.0.0.0~255 .255.255.25 5

MBFDSN

Check Slot No.

This parameter specifies the ADD number of the slot Interval IPRTBIND(Ma Type where the ndatory) command is executed.

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第600页,共3267页

162734118.xls.ms_office1
This parameter specifies the ADD Interval number of the IPRTBIND(Ma subrack where the Type ndatory) command is executed.

文档密级:

MBFDSRN

Check Subrack No.

0~5

0 to 5

MbmsAF

SET Activity factor of AF of MBMS Interval ADMCTRL(Op the MBMS service Type tional) service.

0~100

0~1, step: 0.01

MBMSCCH DL

MBMS common ADD MBMS common Interval channel service TRMFACTOR( channel service Type downlink Optional) downlink factor. factor

0~100

0~100

Mbms MbmsChInd Channel Indicator

Indicating ADD whether the CCH SCCPCHBASI Enumeratio COMMON, COMMON, carries the C(Optional) n Type MCCH MCCH MCCH.

8/7/2013

华为机密,未经许可不得扩散

第601页,共3267页

162734118.xls.ms_office1
When the priority of the RAB of MBMS services exceeds this threshold, reconfigure the MBMS power to the minimum power. The lower the parameter value is, the bigger the scope for selecting the MBMS services is, the more cell MBMS ADD load is decreased, Interval MbmsDecPo descend power CELLLDR(Opti the more effect Type werRabThd rab threshold onal) there is on the MBMS service. At the same time, the cell overload is significantly decreased while the impact on the MBMS services becomes bigger. The higher the parameter value is, the smaller the scope for selecting the MBMS services

文档密级:

1~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第602页,共3267页

162734118.xls.ms_office1

文档密级:

A timer used to SET alarm for no Set mbms data MBMSALARM Interval MbmsInactT mbms data check check timer PARA(Mandato Type mr for MBMS ry) traffic.

1~10

1~10

ON denotes enabling of the MBMS Iub transmission SET resource sharing MBMS Iub OFF(OFF), MbmsIubShar MBMSSWITC function; OFF Enumeratio OFF, ON Sharing switch ON(ON) ingSwitch H(Optional) denotes disabling n Type of the MBMS Iub transmission resource sharing function. ADD Mobile MBMSALARM Mobile country MbmsMCC String Type 000~999 country code SERVICE(Man code of the RNC. datory) ADD Mobile MBMSALARM Mobile network MbmsMNC String Type 000~999 network code SERVICE(Man code of the RNC. datory)

8/7/2013

华为机密,未经许可不得扩散

第603页,共3267页

162734118.xls.ms_office1

文档密级:

MBMS MbmsNCellI neighboring nd cell indicator

ADD It is an indicator FALSE, INTRAFREQN of MBMS Enumeratio TRUE CELL(Optional) neighboring cell. n Type

FALSE,TR UE

MBMS services MbmsOlcRel number Num released

MBMS service release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is ADD performed in each Interval CELLOLC(Opti [OLC period] and Type onal) some services are selected based on the action rules to perform this action. This parameter defines the maximum number of MBMS services released in executing downlink OLC

0~8

0~8

Mbms SET Indicating MbmsPreemp PreemptAlgoS QUEUEPREE whether MBMS tAlgoSwitch witch MPT(Optional) is supported.

Enumeratio OFF, ON n Type

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第604页,共3267页

162734118.xls.ms_office1
This parameter specifies the uplink bit rate of the MBMS service in PTP mode. The CN does not assign the uplink rate to the MBMS service, but the MBMS service in PTP mode is in acknowledged D8, D16, Mbms Ptp SET mode and D32, D64, MbmsPtpUlB UpLink Bit RNCMBMSPA Enumeratio requires the D128, itRate Rate RA(Optional) n Type uplink rate for D144, D256 RLC status reporting. It is a waste of uplink resources if the uplink bandwidth of an MBMS service in PTP mode is high. Therefore, it is recommended the default value be used. ADD CELLMBMSS MBMS SA ID. A(Mandatory) For detailed ADD information of Interval MbmsSaId MBMS SA ID MBMSSA(Man 0~65535 this parameter, Type datory) refer to the 3GPP ADD 25.346. SAMBMSPAR A(Mandatory) ADD MBMS MBMSALARM MBMS Service Interval MbmsService 0~1677721 ServiceId SERVICE(Man Identity. Type Id 5 datory)

文档密级:

8, 16, 32, 64, 128, 144, 256

0~65535

0~1677721 5

ON denotes enabling of the SET MBMS MBMS function; OFF(OFF), MbmsSwitch MBMSSWITC Enumeratio OFF, ON Control Switch OFF denotes ON(ON) H(Mandatory) n Type disabling of the MBMS function. The total MBMS throughput of all ACT the operators Interval LICENSE(Opti cannot exceed Type onal) that defined in the license file.

Max MBMSthroug throughout of hput MBMS

0~3910000

0 to 3910000

8/7/2013

华为机密,未经许可不得扩散

第605页,共3267页

162734118.xls.ms_office1
This parameter specifies the transport mode of MBMS services. The point-tomultipoint (PTM), point-topoint (PTP), and enhanced PTM (ENHANCEDPT M) modes are static or semistatic transport modes. They are relatively simple PTM, PTP, and have little ENHANCE Enumeratio impact on the DPTM, n Type MBMS service DYNAMIC and the network performance. The dynamic mode (DYNAMIC) is complicated. In dynamic mode, transition between PTP and PTM modes is performed dynamically to balance the quality of service and the network

文档密级:

ADD CELLMBMSP ARA(Optional) ADD Mbms MbmsTransM SAMBMSPAR Transfer Mode ode A(Optional) SET RNCMBMSPA RA(Optional)

PTM, PTP, ENHANCE DPTM, DYNAMIC

MBS

This parameter ADD specifies the Max burst size ATMTRF(Opti maximum burst onal) size.

Interval Type

3~10000

3 to 10000

8/7/2013

华为机密,未经许可不得扩散

第606页,共3267页

162734118.xls.ms_office1
ADD CNOPERATO R(Mandatory) ADD LASNAMAP( Mandatory) ADD Mobile country String Type IMSISNAMAP( code of the RNC. Mandatory) ADD GSMCELL(Ma ndatory) SET MBMSPERF(M andatory)

文档密级:

MCC

Mobile country code

000~999

This parameter SET Mcch Access specifies the MCCHPERIOD McchAccessP Period coefficient of COEF(Optional eriodCoef coefficient access period of ) the MCCH.

Interval Type

0~3

0~3

Mcch Mod McchModPer Period iodCoef coefficient

SET MCCHPERIOD COEF(Optional )

This parameter specifies the coefficient of modification period of the MCCH.

Interval Type

7~10

7~10

8/7/2013

华为机密,未经许可不得扩散

第607页,共3267页

162734118.xls.ms_office1

文档密级:

Mcch Repetition McchRepPeri Period odCoef coefficient

This parameter SET specifies the MCCHPERIOD coefficient of COEF(Optional repetition period ) of the MCCH.

Interval Type

0~3

0~3

MCCLASS

MC PRI number

This parameter specifies the priority of the ADD MC. This Interval MPGRP(Option parameter is valid Type al) only when "MLPPP type" is set to MCPPP.

4,8

4(Use two bytes to present MC priority number, 4 classes),8(U se four bytes to present MC priority number, 8 classes)

MCR

This parameter specifies the ADD Minimum cell minimum rate of ATMTRF(Opti rate ATM traffic. onal) Physical unit: cell/s or kbit/s.

Interval Type

30~117924

30 to 117924

MDIDX

MD Index

ADD ETHMD(Mand This parameter Interval atory) specifies an MD. Type ADD ETHMA(Mand atory) ADD This parameter ETHMD(Mand specifies the atory) name of an MD.

0~7

0 to 7

MDNAME

MD Name

String Type -

1 to 20 characters

8/7/2013

华为机密,未经许可不得扩散

第608页,共3267页

162734118.xls.ms_office1
Measurement quantity used in coverage-based inter-RAT measurement in event-3Atriggered reporting mode. - Ec/No: signal-tonoise ratio - RSCP: indicates the received signal code power CPICH_Ec/No indicates that the Ec/No Enumeratio measurement n Type quantity is used for event 3A measurement. The physical unit is dB; CPICH_RSCP indicates that the RSCP measurement quantity is used for event 3A measurement. The physical unit is dBm. AUTO indicates

文档密级:

3A Measure MeasQuantity Quantity Of3A

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

CPICH_EC/ NO~0 CPICH_RS CP~1 AUTO

CPICH_EC/ NO,CPICH _RSCP,AU TO

MEPID

MEPSN

ADD ETHMEP(Man This parameter datory) MEP ID specifies an MEP ACT in an MA. ETHCC(Manda tory) This parameter specifies the ADD number of the MEP Slot No. ETHMEP(Man physical slot datory) where the local MEP in an MA resides.

Interval Type

1~100

1 to 100

Interval Type

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第609页,共3267页

162734118.xls.ms_office1

文档密级:

MEPTYPE

MEP Type

This parameter specifies the type of an MEP to be added to an MA. ADD "LocalMep" LocalMep, LocalMep, ETHMEP(Man Enumeratio indicates a local RemoteMep RemoteMep datory) n Type MEP. "RemoteMep" indicates a remote MEP.

MHF

MP/MC list head option

This parameter ADD specifies the LONG, MPGRP(Option Enumeratio MP/MC list head SHORT al) n Type option.

LONG(Lon g sequence number which is used by MP/MC head),SHO RT(Short sequence number which is used by MP/MC head) 0~255

MichId

MICH ID

ADD CELLMCCH( Mandatory)

ID of the MICH.

Interval Type

0~255

MichPower

TX power of the MICH. The greater the power of the MICH, the higher of the success ratio of ADD Interval the MBMS MICH Power CELLMCCH(O paging. However, Type ptional) more cell power resources are occupied. For details about this parameter, refer to the 3GPP

-10~5

-10~5

8/7/2013

华为机密,未经许可不得扩散

第610页,共3267页

162734118.xls.ms_office1

文档密级:

The value indicates whether the MICH uses time and space ADD MICH STTD TX diversity. For FALSE(Not FALSE, MichSttdInd CELLMCCH(O Enumeratio Indicator detailed Use), TRUE ptional) n Type information of TRUE(Use) this parameter, refer to the 3GPP TS 25.433.

MINBW

Min bandwidth

This parameter specifies the minimum ADD bandwidth for the Interval IPLOGICPORT dynamic Type (Mandatory) bandwidth adjustment on the logical port.

1~1000

64~64000 step:64

Min common Min Common ADD channel priority MinCmchPi channel FACH(Optional supported by priority ) FACH.

D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, 0, 1,..., 15 n Type D10, D11, D12, D13, D14, D15

This parameter specifies the minimum spreading factor supported by downlink Minimum SF ADD SF4, SF8, SF4, SF8, DPDCH. The MinDlChCod of downlink NODEBLMTP Enumeratio SF16, SF32, SF16, SF32, larger the value of eLen DPCH ARA(Optional) n Type SF64 SF64 this parameter, the fewer the available spreading factors of downlink DPDCH.

8/7/2013

华为机密,未经许可不得扩散

第611页,共3267页

162734118.xls.ms_office1
This parameter specifies the minimum value of Ec/NO in the EFACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value). This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR service is set to MIN. The DL code TX power is reported periodically after the event E1 is reported. This parameter specifies the reporting period. This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period.

文档密级:

Minimum MinEcN0Val Ec/N0 Value ue

SET RACHMEASU REPARA(Optio nal)

Interval Type

0~49

-24.5~0, step: 0.5

ADD CELLQUALIT AMR Event E YMEAS(Manda MinForAmrE Reporting tory) Period In Min SET QUALITYME AS(Mandatory)

Interval Type

1~60

1~60

MinForBeE

ADD CELLQUALIT BE Event E YMEAS(Manda Reporting tory) Period In Min SET QUALITYME AS(Mandatory)

Interval Type

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第612页,共3267页

162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting ADD period unit for the CELLQUALIT event F of BE BE Event F YMEAS(Manda service is set to Interval Reporting tory) MIN. The DL Type Period In Min SET code TX power is QUALITYME reported AS(Mandatory) periodically after the event Fa is reported. This parameter specifies the reporting period.

文档密级:

MinForBeF

1~60

1~60

DL basic common SET measurement LDM(Mandator report cycle. For DL basic meas y) Interval MinForDlBas detailed rprt cycle SET Type icMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第613页,共3267页

162734118.xls.ms_office1

文档密级:

Measurement report period of SET event E triggered LDM(Mandator by DL OLC. For DL OLC meas y) Interval MinForDlOlc detailed rprt cycle SET Type Meas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433. This parameter specifies the SET HSDPA bit rate LDM(Mandator measurement MinForHsdpa HSDPA bit y) report period. For Interval PrvidRateMe rate meas cycle SET Type detailed as SATLDM(Man information of datory) this parameter, refer to 3GPP TS 25.433. HSDPA power requirement SET measurement LDM(Mandator report period For HSDPA need y) Interval MinForHsdpa detailed pwr meas cycle SET Type PwrMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433. This parameter specifies the HSUPA bit rate measurement SET MinForHsupa HSUPA bit report period. For Interval LDM(Mandator PrvidRateMe rate meas cycle Type detailed y) as information of this parameter, refer to 3GPP TS 25.433.

1~60

1~60

1~60

1~60

1~60

1~60

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第614页,共3267页

162734118.xls.ms_office1

文档密级:

UL basic common SET measurement LDM(Mandator report cycle. For UL basic meas y) Interval MinForUlBas detailed rprt cycle SET Type icMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~60

1~60

Measurement report period of SET event E triggered LDM(Mandator by UL OLC. For UL OLC meas y) Interval MinForUlOlc detailed rprt cycle SET Type Meas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第615页,共3267页

162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. This parameter specifies the minimum number of links required for an IMA group in the activated state. Minimum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. If MinPCPICHPow er is excessively small, the cell coverage is affected. Ensure that MinPCPICHPow er is set under the condition of a proper proportion of soft handover area, or under the condition that no coverage hole exists.

文档密级:

ADD CELLQUALIT VP Event E YMEAS(Manda MinForVpE Reporting tory) Period In Min SET QUALITYME AS(Mandatory)

Interval Type

1~60

1~60

Min Number MINLNKNU of Links M Activated

ADD IMAGRP(Optio nal)

Interval Type

1~32

1 to 32

Min transmit MinPCPICHP power of ower PCPICH

ADD PCPICH(Option al)

Interval Type

-100~500

-10~50, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第616页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the Min interval STR minimum interval Interval MINRXINT of BFD packet IPCHK(Optiona for receiving BFD Type receive l) packets in millisecond.

10~1000

10 to 1000

This parameter specifies the Min interval STR minimum interval Interval MINTXINT of BFD packet IPCHK(Optiona for sending BFD Type send l) packets in millisecond.

10~1000

10 to 1000

This parameter specifies the minimum spreading factor supported by Minimum SF ADD SF4, SF8, SF4, SF8, uplink DPDCH. MinUlChCod of uplink NODEBLMTP The larger the Enumeratio SF16, SF32, SF16, SF32, eLen DPDCH ARA(Optional) value of this n Type SF64 SF64 parameter, the fewer the available spreading factors of uplink

8/7/2013

华为机密,未经许可不得扩散

第617页,共3267页

162734118.xls.ms_office1
Maximum number of random access preamble loops. If the parameter value is excessively low, the UE access success rate is affected. If the parameter value is ADD excessively high, Max preamble Interval RACH(Optional the UE probably 1~32 loop Type ) tries the access attempt repeatedly within a long time, which increases the uplink interference. For detailed information of this parameter, refer to 3GPP TS 25.331. ADD CNOPERATO R(Mandatory) ADD GSMCELL(Ma ndatory) ADD Mobile Mobile network String Type LASNAMAP( network code code of the RNC. Mandatory) ADD IMSISNAMAP( Mandatory) SET MBMSPERF(M andatory)

文档密级:

Mmax

1~32

MNC

00~99,000~ 999

8/7/2013

华为机密,未经许可不得扩散

第618页,共3267页

162734118.xls.ms_office1

文档密级:

MOCN Control Switch.1) COMM_MOCN_ NRI_GLOBAL_ CONFIG_MODE _SWITCH: When the switch is selected, the NRI of any CN node in the RNC is unique in the CS SET or PS MOCN OPERATORSH domain.2)COMM Bit Field MocnControl Control Switch ARINGMODE( _MIB_MULTI_P Type Switch Optional) LMN_LIST_ALL OWED_SWITCH : When the switch is selected, the operator information configured in the MOCN cell is sent as Multi PLMN List in the system information.

COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH, COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H, SPARE_1_ SWITCH, SPARE_2_ SWITCH, SPARE_3_ SWITCH, SPARE_4_ SWITCH, SPARE_5_ SWITCH, SPARE_6_ SWITCH

COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH, COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H, SPARE_1_ SWITCH, SPARE_2_ SWITCH, SPARE_3_ SWITCH, SPARE_4_ SWITCH, SPARE_5_ SWITCH, SPARE_6_ SWITCH

MOCN MOCNSuppo Support rt

This parameter SET determines OPERATORSH whether the RNC Enumeratio NO, YES ARINGMODE( supports the n Type Optional) MOCN function.

NO,YES

MODE

Configure mode

This parameter SET specifies the QUICKCFG(M configuration andatory) mode.

Enumeratio OFF, ON n Type

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第619页,共3267页

162734118.xls.ms_office1

文档密级:

MODE

MODE

MODE

MODE1(1: This parameter 1 Backup), SET specifies the MODE2(1+ Backup mode Enumeratio MSP(Optional) backup mode of 1 Single n Type the MSP function. End), MODE3(1+ 1 Both End) This parameter specifies the working mode of the system clock source. The system clock source can work in manual mode or in auto mode. If the parameter is SET System clock MANUAL, set to MANUAL, CLKMODE(Ma Enumeratio working mode AUTO you must specify ndatory) n Type the clock source for the system. If the parameter is set to AUTO, the system automatically selects the clock source against the clock switch policy. This parameter specifies the check mode. PRIMARY indicates the check on a STR PRIMARY, primary port. Check mode IPCHK(Mandat STANDBY Enumeratio STANDBY, ory) n Type INDEPEND indicates the ENT check on a standby port. INDEPENDENT indicates the check on an independent port.

MODE1, MODE2, MODE3

MANUAL, AUTO

PRIMARY, STANDBY, INDEPEND ENT

8/7/2013

华为机密,未经许可不得扩散

第620页,共3267页

162734118.xls.ms_office1

文档密级:

MODE

ADD Signalling link Working mode of SERVER, SCTPLNK(Man Enumeratio mode the SCTP link. CLIENT datory) n Type

SERVER, CLIENT

AAL2 modifying MODINDTM indication R timer

This timer is started when an AAL2 signaling entity receives from the peer SET node a request for Interval AAL2TMR(Opt Type modifying the ional) bandwidth of an AAL2 path and sends a modification indication. This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for modifying an AAL2 connection.

5000~3000 5000~3000 0 0

MODREQT MR

AAL2 modifying request timer

Interval Type

5000~3000 5000~3000 0 0

8/7/2013

华为机密,未经许可不得扩散

第621页,共3267页

162734118.xls.ms_office1

文档密级:

MoniterPrd

This parameter specifies a sampling period ADD of retransmission re-TX monitor Interval TYPRABRLC( ratio monitoring period Type Optional) after the RLC entity is established or reconfigured.

40~60000

40~60000

Length of the period within which the times of consecutive failure to increase the rate of a BE service is monitored. Increase of the BE service rate is triggered by 4A DCCC Rate SET measurement Up Fail Interval MoniTimeLe DCCC(Optional reports.IF the Monitor Time Type n ) times exceeds the length DCCC Rate Up Fail Time Threshold, the DCCC Rate Up Fail Penalty Timer will be started, and 4A report will not be processed until DCCC Rate Up Fail Penalty

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第622页,共3267页

162734118.xls.ms_office1

文档密级:

MP Dhcp MPDHCPSV Server IP RIP

This parameter ADD specifies the MP IP Address NODEBESN(M IP address for the Type andatory) DHCP server.

0.0.0.0~255 .255.255.25 5

MPGRPN

MLPPP Group No.

ADD MPGRP(Manda tory) ADD MPLNK(Manda tory)

This parameter specifies the number of the MLPPP group.

Interval Type

0~63

0 to 63

8/7/2013

华为机密,未经许可不得扩散

第623页,共3267页

162734118.xls.ms_office1
Management proving status of the SAAL link.When Management Proving Status is set to MPS_NORMAL, the SAAL sends proving PDUs in its initial alignment. When MPS_EME it is set to ADD RGENCY, Management MPS_EMERGE SAALLNK(Opt Enumeratio MPS_NOR proving status NCY, the SAAL ional) n Type MAL, does not send any MPS_NEU proving PDU in TRAL its initial alignment. When it is set to MPS_NEUTRAL , the SAAL decides whether to send proving PDUs as required by users and the peer end in its initial alignment. ADD This parameter MPGRP(Option specifies the al) MLPPP type.

文档密级:

MPS

MPS_NOR MAL, MPS_EME RGENCY, MPS_NEU TRAL

MPTYPE

MLPPP type

MLPPP, Enumeratio MCPPP n Type

MLPPP(ML PPP group),MCP PP(MCPPP group)

MPUSLOT

This parameter specifies the ADD MPU Slot No. number of a slot BRD(Optional) that holds the MPU.

Interval Type

0,2,4,8,10

0,2,4,8,10

8/7/2013

华为机密,未经许可不得扩散

第624页,共3267页

162734118.xls.ms_office1
This switch specifies whether to add the MSCH logical channel on the SCCPCH. When multiMTCH logical channels are Msch Switch SET carried on one For MtchMulti MBMSSWITC SCCPCH, an Sccpch H(Optional) MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH. This parameter specifies whether to add the MSCH logical channel on the SCCPCH. When one MTCH logical channel is Msch Switch carried on one SET For SCCPCH, an MBMSSWITC NonMtchMulti MSCH logical H(Optional) Sccpch channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH.

文档密级:

MschSwitchF orMtchMulti

OFF(OFF), Enumeratio OFF, ON ON(ON) n Type

MschSwitchF orNonMtchM ulti

OFF(OFF), Enumeratio OFF, ON ON(ON) n Type

8/7/2013

华为机密,未经许可不得扩散

第625页,共3267页

162734118.xls.ms_office1

文档密级:

MsgContent

Msg Content

ADD Broadcast CELLCBSSAC( message content. Mandatory)

Any Type

-

1~100 characters

MsgInd

Message Indicator

When the parameter value is ON,the broadcast OFF(Messa ADD message is ge is CELLCBSSAC( valid,When Enumeratio OFF,ON invalid), Optional) OFF,the n Type ON(Messag broadcast e is valid) message is invalid.

8/7/2013

华为机密,未经许可不得扩散

第626页,共3267页

162734118.xls.ms_office1

文档密级:

MSPCMD

MSP Control Command

CLEAR(Cle ared), LOP(Locko ut of Protection), FS(Forcibly switchover working link to This parameter protection specifies the link), SET control command MS(Manual CLEAR,LO MSPCMD(Man Enumeratio of the MSP switchover P,FS,MS,E datory) n Type switchover XERS, from protection group. working link to protection link), EXERS(Exe rcisely switch working link to protection link)

8/7/2013

华为机密,未经许可不得扩散

第627页,共3267页

162734118.xls.ms_office1
Maximum power limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the power of all the MTCHs are little, preemption of MBMS PTM bearing should be ADD MTCH avoided. This is Interval CELLCAC(Opti MtchMaxPwr maximal power because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the nonMBMS services.

文档密级:

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第628页,共3267页

162734118.xls.ms_office1
Maximum code limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the code of all the MTCHs are few, preemption of MBMS PTM bearing should be ADD avoided. This is Interval CELLCAC(Opti because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the nonMBMS services.

文档密级:

MtchMaxSf

MTCH maximal SF

0~63

0~63

8/7/2013

华为机密,未经许可不得扩散

第629页,共3267页

162734118.xls.ms_office1
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 0. When the cell load is high, the RNC configures low power for the ADD MBMS service so CELLMBMSF as to avoid Mtch Minimal ACH(Optional) worsening Interval MtchMinPerc Power Percent SET congestion in the Type 0 for priority 0 MBMSFACH( cell and improve Optional) the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area

文档密级:

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第630页,共3267页

162734118.xls.ms_office1
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 15. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area This parameter specifies the MTCH multiplexing threshold. When the rate of an MBMS service is lower than this threshold, the service, together with other services, is allocated a multiplexed SCCPCH, whose transmission rate is set to the MTCH multiplexing threshold fixedly.

文档密级:

ADD CELLMBMSF Mtch Minimal ACH(Optional) MtchMinPerc Power Percent SET 15 for priority 15 MBMSFACH( Optional)

Interval Type

0~100

0~1, step: 0.01

MTCH MtchMultiple Multiplex xThd Threshold

SET RNCMBMSPA RA(Optional)

D16, D32, 16, 32, 64, Enumeratio D64, D128, 128, 256 n Type D256

8/7/2013

华为机密,未经许可不得扩散

第631页,共3267页

162734118.xls.ms_office1
This parameter specifies whether to apply Robust Header SET Mtch Rohc Compression MtchRohcSwi MTCH(Optiona Switch (ROHC) on the tch l) MTCH. The value TRUE indicates to apply ROHC on the Available guarantee power of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the power of all the MTCHs are little, pre-emption of MBMS PTM bearing should be ADD MTCH avoided. This is MtchRsvPwr CELLCAC(Opti reserve power because the onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-

文档密级:

TRUE, Enumeratio True, False FALSE n Type

Interval Type

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第632页,共3267页

162734118.xls.ms_office1
Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are few, pre-emption of MBMS PTM bearing should be ADD avoided. This is Interval CELLCAC(Opti because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-

文档密级:

MtchRsvSf

MTCH reserve SF

0~63

0~63

MTRLGY

Metrology

The OM MET(Metri ADD interface supports c System), SMLCCELL(O localization and Enumeratio 0~1 IMP(British ptional) MET or IMP can n Type Measureme be selected. nt)

8/7/2013

华为机密,未经许可不得扩散

第633页,共3267页

162734118.xls.ms_office1

文档密级:

MTRLGY

MTRLGY

ADD GPS(Optional)

This parameter specifies whether the metric system Enumeratio MET(MET) MET, IMP or the imperial n Type , IMP(IMP) system is used.

MTU

MTU

SET ETHPORT(Opti onal) ADD SCTPLNK(Opti onal)

This parameter specifies the Interval maximum Type transmission unit.

256~1500

256 to 1500

MUXTIME

PPP mux frame group out-time

ADD PPPLNK(Optio nal) ADD MPGRP(Option al)

This parameter specifies the maximum time Interval elapsed before the Type sub-frames over the PPP link are multiplexed.

1~1500

1 to 1500

8/7/2013

华为机密,未经许可不得扩散

第634页,共3267页

162734118.xls.ms_office1

文档密级:

MYDISCRI MINATOR

My discriminator of BFD

This parameter STR specifies the IPCHK(Optiona discriminator of l) the check on the local end.

Interval Type

1~16

1~16

N1

N1

Number of proving PDUs ADD transmitted Interval SAALLNK(Opt during the Type ional) proving.Referenc e to ITU-T Q2110. Maximum number of retransmissions of the RRC CONNECTION REQUEST message. Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protoco l default value is 3. Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default value is 2. Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE.

10~2000

10~2000

N300

Constant 300

SET IDLEMODETI MER(Optional)

Interval Type

0~7

0~7

N302

Constant 302

SET CONNMODET IMER(Optional)

Interval Type

0~7

0~7

N304

Constant 304

SET CONNMODET IMER(Optional)

Interval Type

0~7

0~7

N308

Constant 308

SET CONNMODET IMER(Optional)

Interval Type

1~8

1~8

8/7/2013

华为机密,未经许可不得扩散

第635页,共3267页

162734118.xls.ms_office1
Maximum D1, D2, number of D4, D10, successive "in D20, D50, sync" indications Enumeratio D100, received from L1. n Type D200, Protocol default D400, value is 1. D600, D1, D2, D4, D10, D20, D50, D100, D200, D400, D600,

文档密级:

N312

Constant 312

SET CONNMODET IMER(Optional) SET IDLEMODETI MER(Optional)

N313

Constant 313

Maximum number of D1, D2, SET successive "out of D4, D10, CONNMODET sync" indications Enumeratio D20, D50, IMER(Optional) received from L1. n Type D100, D200 Protocol default value is 20. Maximum number of successive "in sync" indications received from L1 when T313 is activated. Protocol default value is 1. Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1. D1, D2, D4, D10, D20, D50, D100, Enumeratio D200, n Type D400, D600, D800, D1000

D1, D2, D4, D10, D20, D50, D100, D200

N315

Constant 315

SET CONNMODET IMER(Optional)

D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000

N381

Constant 381

SET CONNMODET IMER(Optional)

D1, D2, Enumeratio D3, D4 n Type

D1,D2,D3, D4

8/7/2013

华为机密,未经许可不得扩散

第636页,共3267页

162734118.xls.ms_office1
ADD MTP3RT(Mand atory) ADD MTP3LKS(Man datory) ADD ADJNODE(Ma ndatory) ADD MTP3LNK(Ma ndatory) ADD M3DE(Mandato ry) ADD Name of the M3LE(Mandato MTP3RT. ry) ADD M3LKS(Mandat ory) ADD M3LNK(Manda tory) ADD M3RT(Mandato ry) ADD N7DPC(Mandat ory) ADD OPC(Mandatory

文档密级:

NAME

Signalling Route name

String Type -

1~31 characters

NB01max

Upper limit of random access back-off delay. ADD Random backFor details, refer Interval RACH(Optional off upper limit to the 3GPP TS Type ) 25.331 and 3GPP TS 25.214 protocols.

0~50

0~50

8/7/2013

华为机密,未经许可不得扩散

第637页,共3267页

162734118.xls.ms_office1

文档密级:

NB01min

Lower limit of random access back-off delay. ADD Random backFor details, refer Interval RACH(Optional off lower limit to the 3GPP TS Type ) 25.331 and 3GPP TS 25.214 protocols.

0~50

0~50

AMR_RRC Number per NBAmrRrcN Second for um NodeB

When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for NodeB.

1~200

1~200

This parameter NBAP service SET specifies the NBAPSRVP listening port SCTPSRVPOR number of the N No. T(Optional) NBAP service listening port.

Interval Type

1024~6553 1024~6553 5 5

8/7/2013

华为机密,未经许可不得扩散

第638页,共3267页

162734118.xls.ms_office1

文档密级:

NBATMOA MIP

This parameter NodeB ADD specifies the OM IP Address ATM_TRANS NODEBIP(Man address for Type IP address datory) NodeB ATM transport.

0.0.0.0~255 .255.255.25 5

NBATMOA MMASK

This parameter NodeB ADD specifies the OM IP Address ATM_TRANS NODEBIP(Man mask for NodeB Type IP Mask datory) ATM transport.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第639页,共3267页

162734118.xls.ms_office1
When call shock control starts, the register and 3GSET Interval >2G reselect CALLSHOCKC Type number can be TRL(Optional) accessed per second for NodeB.

文档密级:

HiPri_RRC Number per NBHighPriRr Second for cNum NodeB

1~200

1~200

This parameter NodeB ADD specifies the OM IP Address IP_TRANS IP NODEBIP(Man address for NBIPOAMIP Type address datory) NodeB IP transport.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第640页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter NodeB ADD specifies the OM IP Address NBIPOAMM IP_TRANS IP NODEBIP(Man mask for NodeB Type ASK Mask datory) IP transport.

0.0.0.0~255 .255.255.25 5

NBLB1

ADD This parameter The First NODEBESN(M specifies the first Serial Number andatory) ESN.

String Type -

1 to 30 characters

NBLB2

ADD This parameter The Second NODEBESN(M specifies the Serial Number andatory) second ESN.

String Type -

1 to 30 characters

8/7/2013

华为机密,未经许可不得扩散

第641页,共3267页

162734118.xls.ms_office1
The above values of the algorithms represent the following information: CRD_ADCTRL: Control NodeB Credit admission control algorithm Only when IUB_CONG_CA C_SWITCH which is set by the SET ADD CACALGOSWIT CELLALGOS CH command and Bit Field WITCH(Option this switch are Type al) on,the NodeB Credit admission control algorithm is valid. HSDPA_UU_AD CTRL: Control HSDPA UU Load admission control algorithm HSDPA_GBP_M EAS: Control HSDPA HSDSCH Required Power measurement

文档密级:

Cell CAC NBMCacAlg algorithm oSwitch switch

CRD_ADC TRL(Credit Admission Control Algorithm), HSDPA_U U_ADCTR L(HSDPA UU Load Admission Control Algorithm), HSUPA_U U_ADCTR L(HSUPA UU Load Admission Control Algorithm), MBMS_UU _ADCTRL( MBMS UU Load Admission Control Algorithm), HSDPA_G BP_MEAS( HSDPA GBP Meas Algorithm),

CRD_ADC TRL,HSDP A_UU_AD CTRL,HSU PA_UU_A DCTRL,M BMS_UU_ ADCTRL,H SDPA_GBP _MEAS,HS DPA_PBR_ MEAS,DOF FC,HSUPA _PBR_ME AS,HSUPA _EDCH_RS EPS_MEAS ,EMC_UU_ ADCTRL,F ACH_UU_ ADCTRL

8/7/2013

华为机密,未经许可不得扩散

第642页,共3267页

162734118.xls.ms_office1
The algorithms with the above values represent are as follow: ALGORITHM_O FF: Disable downlink call admission control algorithm. ALGORIT ALGORITHM_F HM_OFF, ALGORIT IRST: The load ALGORIT HM_OFF,A factor prediction ADD HM_FIRST LGORITH Downlink algorithm will be CELLALGOS , M_FIRST, NBMDlCacA CAC algorithm used in downlink Enumeratio WITCH(Manda ALGORIT ALGORIT lgoSelSwitch switch CAC. n Type tory) HM_SECO HM_SECO ALGORITHM_S ND, ND,ALGO ECOND: The ALGORIT RITHM_T equivalent user HM_THIR HIRD number algorithm D will be used in downlink CAC. ALGORITHM_T HIRD: The loose call admission control algorithm will be used in downlink CAC.

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第643页,共3267页

162734118.xls.ms_office1
The algorithms with the above values represent are as follow: INTRA_FREQU ENCY_LDB: Intra-frequency load balance algorithm. It is also named cell breathing algorithm.Based on the cell load, this algorithm ADD changes the pilot CELLALGOS power of the cell Bit Field WITCH(Option to control the load Type al) between intrafrequency cells. PUC: Potential user control algorithm. Based on the cell load, this algorithm changes the selection/reselecti on parameters of a cell to lead the UE to a lighter loaded cell. UL_UU_OLC: UL UU overload

文档密级:

Cell LDC NBMLdcAlg algorithm oSwitch switch

INTRA_FR EQUENCY _LDB(Intra Frequency LDB Algorithm), PUC(Potent ial User Control Algorithm), UL_UU_L DR(Uplink UU LDR Algorithm), DL_UU_L DR(Downli nk UU LDR Algorithm), UL_UU_O LC(Uplink UU OLC Algorithm), DL_UU_O LC(Downli nk UU OLC Algorithm), OLC_EVE NTMEAS( OLC Event Meas Algorithm),

INTRA_FR EQUENCY _LDB,PUC, UL_UU_L DR,DL_UU _LDR,UL_ UU_OLC,D L_UU_OL C,OLC_EV ENTMEAS, CELL_CO DE_LDR,C ELL_CRED IT_LDR

8/7/2013

华为机密,未经许可不得扩散

第644页,共3267页

162734118.xls.ms_office1

文档密级:

The algorithms with the above values represent are as follow: NBM_LDC_ALL _UE: When interfrequency blind NBM_LDC handover select _ALL_UE( user occurs, no Select all need to consider users), whether target NBM_LDC cell support users. _MATCH_ NBM_LDC_MA UE_ONLY( ADD TCH_UE_ONLY BHO Select Select users CELLALGOS : When interNbmLdcBHO User algorithm Enumeratio match target WITCH(Option frequency blind UeSelSwitch switch n Type cell support al) handover select only), user occurs, only NBM_LDC consider users _MATCH_ supported by UE_FIRST( target cell. Select users NBM_LDC_MA match target TCH_UE_FIRST cell support : When interfirst) frequency blind handover select user occurs, first consider users supported by target cell.

NBM_LDC _ALL_UE, NBM_LDC _MATCH_ UE_ONLY, NBM_LDC _MATCH_ UE_FIRST

The algorithms with the above values represent are as follow: ALGORITHM_R EQUIRED: Always reset the ALGORIT mac-hs no matter ALGORIT ADD HM_REQU the cells in Mac-hs Reset HM_REQU NBMMachsR CELLALGOS question are in IRED, algorithm Enumeratio IRED,ALG esetAlgoSelS WITCH(Option the same NodeB ALGORIT switch n Type ORITHM_ witch al) HM_DEPE or not. DEPEND_ ND_ON_L ALGORITHM_D ON_LCG CG EPEND_ON_LC G: Reset the machs only when the cells in question are in the different local cell group.

8/7/2013

华为机密,未经许可不得扩散

第645页,共3267页

162734118.xls.ms_office1
The algorithms with the above values represent are as follow: ALGORITHM_O FF: Disable uplink call admission control ALGORIT algorithm. HM_OFF, ALGORIT ALGORITHM_F ALGORIT HM_OFF,A IRST: The load ADD HM_FIRST LGORITH factor prediction CELLALGOS algorithm will be , M_FIRST, Enumeratio WITCH(Manda used in uplink ALGORIT ALGORIT n Type tory) HM_SECO HM_SECO CAC. ND, ND,ALGO ALGORITHM_S ALGORIT RITHM_T ECOND: The HM_THIR HIRD equivalent user D number algorithm will be used in uplink CAC. ALGORITHM_T HIRD: The loose call admission control algorithm will be used in

文档密级:

Uplink CAC NBMUlCacA algorithm lgoSelSwitch switch

8/7/2013

华为机密,未经许可不得扩散

第646页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter is used to identify WPS users with priority. For SET instance, if Set WPS user Bit Field NbmWpsAlg WPSALGO(Opt priorities 3, 4, 5, priority Type orithmPriority ional) and 6 are selected, users with priorities are regarded as WPS users.

PRIORITY 1(WPS USER PRIORITY 1), PRIORITY 2(WPS USER PRIORITY 2), PRIORITY 3(WPS USER PRIORITY 3), PRIORITY 4(WPS USER PRIORITY 4), PRIORITY 5(WPS USER PRIORITY 5), PRIORITY 6(WPS USER PRIORITY 6), PRIORITY

PRIORITY 1, PRIORITY 2, PRIORITY 3, PRIORITY 4, PRIORITY 5, PRIORITY 6, PRIORITY 7, PRIORITY 8, PRIORITY 9, PRIORITY 10, PRIORITY 11, PRIORITY 12, PRIORITY 13, PRIORITY 14,

Set WPS NbmWpsAlg Algorithm orithmSwitch Switch

WPS (Wireless Priority Service) is NS/EP (National Security/Emergen ALGORIT cy Preparedness) HM_OFF( AMR WPS conversation Algorithm SET service controlled Switch WPSALGO(Opt by White House Enumeratio OFF), ional) of USA. NCS is n Type ALGORIT authorized to HM_ON(W manage the PS execution of the Algorithm WPS project. Switch ON) This switch indicates whether the WPS function is supported.

ALGORIT HM_OFF, ALGORIT HM_ON

8/7/2013

华为机密,未经许可不得扩散

第647页,共3267页

162734118.xls.ms_office1
When the RRC REQ total number NodeB Call SET of one NodeB NBTotalRrcN Shock Trigger CALLSHOCKC reach this umThd Threshold TRL(Optional) threshold the RRC flow control will be triggered. This parameter specifies the transport type of the NodeB. ATMTRANS_IP indicates the ATM transport ADD NodeB type, NBTRANTP NODEBIP(Man TransType IPTRANS_IP datory) indicates the IP transport type, and ATMANDIPTRA NS_IP indicates the ATM and IP transport types.

文档密级:

Interval Type

1~200

1~200

ATMTRAN S_IP, IPTRANS_I Enumeratio P, n Type ATMANDI PTRANS_I P

ATMTRAN S_IP, IPTRANS_I P, ATMANDI PTRANS_I P

NCC

Uniquely ADD identifying the Network color Interval GSMCELL(Ma different network code Type ndatory) in the neighboring area.

0~7

0~7

ADD INTERFREQN CELL(Mandato Uniquely Neighboring ry) NCellId identifying a cell ID ADD neighboring cell. INTRAFREQN CELL(Mandato ry) The cell will shut down automatically Cell Dynamic ADD only when the ShutDown CELLDYNSHU neighboring cell NCellLdrRem Neighbour Cell TDOWN(Optio load is less than ainThd Load Remain nal) the difference threshold between the LDR threshold and this threshold.

Interval Type

0~65535

0~65535

Interval Type

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第648页,共3267页

162734118.xls.ms_office1
ADD INTRAFREQN CELL(Mandato ry) ADD INTERFREQN CELL(Mandato ry)

文档密级:

NCellRncId

RNC ID of a neighboring cell

ID of the RNC controlling a neighboring cell. Interval Uniquely Type identifying an RNC.

0~4095

0~4095

NcMode

ADD Indicating the Network GSMCELL(Opt network control Control Mode ional) mode.

NC0, NC1, Enumeratio NC2, NC0,NC1,N n Type RESET C2,RESET

Counting NCountingTh Threshold d

ADD CELLMBMSP ARA(Optional) ADD SAMBMSPAR A(Optional) SET RNCMBMSPA RA(Optional)

When the number of UEs responding to counting/recounti ng is greater than or equal to this threshold, the PTM mode is applied to data transmission. Otherwise, the PTP mode is used. Note that the number of UEs includes the number of Interval connected mode Type UEs. A larger value of this parameter leads to a higher probability of using PTP transmission on the network. Power control is available for PTP transmission, and thus the power consumption in PTP mode is lower than that in

2~10

2~10

8/7/2013

华为机密,未经许可不得扩散

第649页,共3267页

162734118.xls.ms_office1
When this parameter is set to ON, and when the load of the GSM cell exceeds the related threshold, the RNC will stop the non-coverage based inter-RAT handover; when this parameter is set to OFF, the RNC will do reversely. This SET parameter NCOV Reloc INTERRATHO determines Ind based on NCOV(Optional whether to stop GSM cell load ) the non-coverage based handover from the UMTS network to the GSM network according to the load information of the GSM cell. When the GSM network can provide its load information to the UMTS network, the RNC determines Maximum number of nonHCS cell reselection. This parameter, along with ADD Tcrmaxnonhcs, Non-HCS CELLSELRES defines the speed NCR EL(Optional) estimation threshold of nonHCS cells. For detailed inforamtion, refer to 3GPP TS 25.304.

文档密级:

NcovHoOn2 GldInd

Enumeratio OFF, ON n Type

OFF, ON

Ncrnonhcs

Interval Type

1~16

1~16

Indicating NO(NO_DI ADD whether the DSP RECT_CO NEIGHBOR Adjacent flag N7DPC(Option and the OSP are Enumeratio NNECT), NO, YES al) connected directly n Type YES(DIRE or indirectly. CT_CONN ECT)

8/7/2013

华为机密,未经许可不得扩散

第650页,共3267页

162734118.xls.ms_office1

文档密级:

NEXTHOP

This parameter ADD Forward route specifies the IP BAMIPRT(Man address address of the datory) next hop.

IP Address Type

0.0.0.0 to 255.255.255 .255

NEXTHOP

ADD IPRT(Mandator Forward route y) address ADD IPRTBIND(Ma ndatory)

This parameter specifies the IP address of the next hop.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第651页,共3267页

162734118.xls.ms_office1
Threshold for deciding that the UE is in highmobility state. This parameter specifies a threshold for highspeed decision. After the UE reports event 1D, ADD the UE is CELLHCSHO( Threshold for considered in Optional) Interval NFastSpdEst UE fast speed high-mobility SET Type decision state if the HCSHO(Option number of al) changes of the best cell during [TFASTSPDEST ] is larger than [NFASTSPDEST ]. The smaller the value is, the more possibly the UE is decided in highmobility state.

文档密级:

1~16

1~16

NI

Network ID

Internationa l Network Network Code, Indicator. Internationa INT(international l Standby network), ADD INT, INTB, Network INTB(internation OPC(Mandatory Enumeratio NAT, Code, al reserved), ) n Type NATB National NAT(national Network network), Code, NATB(national National reserved). Standby Network Code

8/7/2013

华为机密,未经许可不得扩散

第652页,共3267页

162734118.xls.ms_office1
This parameter defines the of successive insync indications required for the NodeB to trigger the radio link recovery process.The radio link set remains in the initial state until it has received a certain number (the number is defined ADD by NInsyncInd) of Interval CELLSETUP(O successive inType ptional) sync indications from L1, and then the NodeB triggers the radio link recovery process, which indicates that the radio link set has been synchronized. Once the radio link recovery process is triggered, the radio link set is

文档密级:

NInsyncInd

Num of continuous in sync ind

1~256

1~256

8/7/2013

华为机密,未经许可不得扩散

第653页,共3267页

162734118.xls.ms_office1

文档密级:

NMO

This parameter should be set according to the actual network situation . If there is the Gs interface between SGSN ADD Network mode and MSC/VLR MODE1, CNDOMAIN(O Enumeratio of operation this parameter is MODE2 ptional) n Type set as MODE1; otherwise, MODE2. It is valid only when [CN domain ID] is set as PS_DOMAIN.

MODE1,M ODE2

8/7/2013

华为机密,未经许可不得扩散

第654页,共3267页

162734118.xls.ms_office1

文档密级:

NNSfTmr

Timer NNSF

This parameter specifies the value of the NAS Node Selection Function (NNSF) timer for CS traffic paging. For the IMSI paging of the UE in CS connection mode, SET on receiving the OPERATORCF IMSI paging with Interval GPARA(Option the first Global Type al) CN ID, the RNC stores the Global CN ID and starts the NNSF protection timer. Once the UE responds to the IMSI paging, the RNC stops the NNSF protection timer.

0~60

0~60

NodeB Cab NODEBCAB No. N

This parameter specifies the STR number of the Interval NODEBBWRP cabinet where the Type T(Mandatory) NodeB is installed. Maximum number of HSDPA users of the NodeB. If the HSDPA user ADD access is rejected NODEBALGO Interval by the NodeB, PARA(Optional Type you can infer that ) the HSDPA licenses are insufficient. New HSDPA licenses are required.

0

0

NodeB Max NodeBHsdpa HSDPA User MaxUserNum Number

0~3840

0~3840

8/7/2013

华为机密,未经许可不得扩散

第655页,共3267页

162734118.xls.ms_office1
Maximum number of HSUPA users of the NodeB. If the HSUPA user ADD access is rejected NODEBALGO Interval by the NodeB, PARA(Optional Type you can infer that ) the HSUPA licenses are insufficient. New HSUPA licenses are required.

文档密级:

NodeB Max NodeBHsupa HSUPA User MaxUserNum Number

0~3840

0~3840

NodeBId

NodeB ID

ADD NODEB(Manda tory) ADD ADJNODE(Ma ndatory) ADD NODEBIP(Man NodeB ID. datory) ADD NODEBESN(M andatory) STR NODEBDETE CT(Mandatory)

Interval Type

0~65535

0~65535

NodeB IMA NODEBIMA group No. GRPN

This parameter STR specifies the Interval NODEBBWRP number of an Type T(Mandatory) IMA group of the NodeB.

0~3

0 to 3

8/7/2013

华为机密,未经许可不得扩散

第656页,共3267页

162734118.xls.ms_office1
IUB_LDR (Iub congestion control algorithm): When the NodeB Iub load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action (such as BE ADD service rate NODEBALGO reduction) in Bit Field PARA(Optional order to reduce Type ) the NodeB Iub load. NODEB_CREDI T_LDR (NodeB level credit congestion control algorithm): When the NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs and some

文档密级:

NodeB LDC NodeBLdcAl algorithm goSwitch switch

IUB_LDR(I UB LDR Algorithm), NODEB_C REDIT_LD R(NodeB Credit LDR Algorithm), LCG_CRE DIT_LDR( LCG Credit LDR Algorithm), IUB_OLC(I UB OLC Algorithm)

IUB_LDR, NODEB_C REDIT_LD R, LCG_CRE DIT_LDR, IUB_OLC

8/7/2013

华为机密,未经许可不得扩散

第657页,共3267页

162734118.xls.ms_office1
ADD NODEB(Manda tory) ADD NBNODESYN CMONPARA( Mandatory) ADD LOCELL(Mand atory) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato Name of the ry) NodeB. ADD NODEBLDR( Mandatory) ADD NODEBALGO PARA(Mandato ry) ADD IPDL(Mandator y) ADD NCP(Mandatory ) ADD CCP(Mandatory

文档密级:

NodeBName NodeB name

String Type -

1~64 characters

8/7/2013

华为机密,未经许可不得扩散

第658页,共3267页

162734118.xls.ms_office1

文档密级:

NodeB NodeBProtcl Protocol Ver version

ADD Protocol version R99, R4, R99, R4, NODEB(Option Enumeratio of the NodeB. R5, R6, R7 R5, R6, R7 al) n Type

NODEBRPT PERIOD

NODEBRPT TYPE

This parameter specifies the STR period of Report period NODEBBWRP reporting the T(Optional) NodeB bandwidth, in minutes. This parameter specifies the type of reporting the NodeB bandwidth. "PERIOD" indicates the STR periodical report Report type NODEBBWRP type. "EVENT" T(Optional) indicates the event-based report type, for example, the report triggered by bandwidth change.

Interval Type

1~60

1 to 60

PERIOD, Enumeratio EVENT n Type

PERIOD,E VENT

8/7/2013

华为机密,未经许可不得扩散

第659页,共3267页

162734118.xls.ms_office1

文档密级:

NODEBSN

NodeB Slot No.

This parameter specifies the STR number of the slot Interval NODEBBWRP where the port of Type T(Mandatory) the NodeB is located. This parameter specifies the STR number of the Interval NODEBBWRP subrack where the Type T(Mandatory) NodeB is installed.

0 to 1,12 to 0~1,12~15, 15,22 to 23 22~23

NODEBSRN

NodeB Subrack No.

0~2

0 to 2

This parameter STR BASE_BO NodeB specifies the type BASE_BO NODEBSUB NODEBBWRP Enumeratio ARD, Subboard type of a sub-board of ARD,CH_S BRDTYPE T(Mandatory) n Type CH_STM1, the NodeB. TM1,E1 E1

NodeBType

NodeB Type

ADD Indicating the NODEB(Option type of the al) NodeB.

NORMAL( Normal), PICO_TYP Enumeratio E1(Pico n Type type 1), PICO_TYP E2(Pico type 2)

NORMAL, PICO_TYP E1, PICO_TYP E2

ADD Measurement NBNODESYN Period of node NodeSyncPeri period CMONPARA( synchronization. od Mandatory)

Interval Type

1~288

5~1440, step:5

NodeSyncTi me

ADD Measurement Measurement NBNODESYN start time start time CMONPARA( (HH:MM:SS). Mandatory)

Compound hour, min, Type sec

00:00:00~2 3:59:59

8/7/2013

华为机密,未经许可不得扩散

第660页,共3267页

162734118.xls.ms_office1

文档密级:

NODET

Adjacent Node Type

UNI_AAL2SWIT CH is the IUB, IUR, adjacent node of IUCS, the ATM switch ADD IUPS, on the Iub ADJNODE(Ma interface. Enumeratio UNI_AAL2 ndatory) SWITCH, NNI_AAL2SWIT n Type NNI_AAL2 CH is the SWITCH adjacent node of the ATM switch on the Iur or IuCS interface. ADD NODEBLMTP ARA(Mandator y) This parameter PICO_TYP specifies the Enumeratio E1, small-scaled base n Type PICO_TYP station type. E2

IUB, IUR, IUCS, IUPS, UNI_AAL2 SWITCH, NNI_AAL2 SWITCH

NodeType

Small-scaled base station type

PICO_TYP E1, PICO_TYP E2

NonhcsInd

Non-HCS indicator

Indicating whether the nonADD CONFIGU CONFIGU HCS speed CELLSELRES Enumeratio RED, RED, estimation EL(Optional) n Type NOT_CON NOT_CON parameter should FIGURED FIGURED be configured.

8/7/2013

华为机密,未经许可不得扩散

第661页,共3267页

162734118.xls.ms_office1
This parameter specifies the ratio of the non-serving E-DCH RX power to the total E-DCH RX power. The parameter indicates whether a non-serving NodeB sends the relative grant (RG) message to the UE. If the Target Nonparameter value is serving EADD NonServToTo set too low, the Interval DCH to Total CELLHSUPA( talEdchPwrRa power of the non- Type E-DCH Power Optional) tio serving radio link ratio will be low and the data rate on non-serving EDCH will be reduced, thus impacting the transport rate of the UE in soft handover state. If the parameter value is too high, the non-serving RL cannot send RG to the UE

文档密级:

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第662页,共3267页

162734118.xls.ms_office1
This parameter defines the of successive insync indications required for starting the radio link failure timer. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-ofsync indications Num of ADD of the number Interval NOutsyncInd continuous out CELLSETUP(O defined by Type of sync ind ptional) NOutsyncInd.The NodeB shall stop and reset the timer after receiving successive insync indications of the number defined by NInsyncInd.When the timer expires, the NodeB triggers the radio link failure process, and

文档密级:

1~256

1~256

8/7/2013

华为机密,未经许可不得扩散

第663页,共3267页

162734118.xls.ms_office1

文档密级:

NPrio

Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. ADD The lower the INTERFREQN priority, the easier CELL(Mandato it is for the The priority of Interval ry) neighboring cell neighbor cell Type ADD to be delivered as GSMNCELL(M the measurement andatory) object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier ADD it is for the The priority of INTRAFREQN Interval neighboring cell neighbor cell CELL(Mandato Type to be delivered as ry) the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object.

0~63

0~63

NPrio

0~30

0~30

8/7/2013

华为机密,未经许可不得扩散

第664页,共3267页

162734118.xls.ms_office1
Priority identifier of neighboring cells. TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring cell combination. FALSE indicates FALSE, that the Enumeratio TRUE neighboring cell n Type priority is invalid, and, in the algorithm of neighboring cell combination, the cell with invalid priority is the last one to be considered as the measurement object.

文档密级:

NPrioFlag

ADD INTERFREQN CELL(Optional) ADD The flag of the INTRAFREQN priority CELL(Optional) ADD GSMNCELL(O ptional)

FALSE,TR UE

8/7/2013

华为机密,未经许可不得扩散

第665页,共3267页

162734118.xls.ms_office1
This parameter specifies the NPTP-PTM offset. During recounting in PTP mode, if the number of PTP users is larger than or equal to NPTP-PTM, the transmission mode transits to PTM. The value of NPTP-PTM = [PARA]Ncountin gThd[/PARA] + [PARA]NPtpToP tmOffset[/PARA] . The transition between PTP and PTM affects user experience. Thus, to minimize pingpong effect, the transition between PTP and PTM uses a threshold other than [PARA]Ncountin gThd[/PARA]. The two Identifying a Network resourse . 1. The NRI numbers of CS domain and PS domain are independent from each other. 2. If multiple pool areas overlap, the NRI uniquely identify all the CN nodes connected to it. 3. A CN node can have multiple NRIs. In one pool area, however, an NRI can only correspond to one CN node.

文档密级:

Ptp To Ptm NPtpToPtmO Offset ffset

ADD CELLMBMSP ARA(Optional) ADD SAMBMSPAR A(Optional) SET RNCMBMSPA RA(Optional)

Interval Type

1~5

1~5

NRI

Network resource identity

ADD NRIGLBCNID MAP(Mandator y)

Interval Type

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第666页,共3267页

162734118.xls.ms_office1
ADD NRNC(Mandat ory) ADD NRNCURA(Ma ndatory) Neighboring Interval ADD RNC ID. Type NRNCCELL(M andatory) ADD RNCPOOLME MBER(Mandat ory) Source ATM address. It should be input in hexadecimal format with prefix of "H'". 1.The first byte of it is recommended to started with H'45 (indicating E.164 address), H'39 (indicating DCC address) or H'47 (indicating ICD ADD address). When it RNCBASIC(M Any Type is started with andatory) "H'45", the following seven and a half octets must be BCD code, called E.164e when the last part DSP is full of zero, such as 0x450009715002 02001F00000000 00000000000000, while called E.164A when the last part DSP is

文档密级:

NRncId

Neighboring RNC ID

0~4095

0~4095

NSAP

Source ATM address

-

ATM address

8/7/2013

华为机密,未经许可不得扩散

第667页,共3267页

162734118.xls.ms_office1
Destination ATM address of the AAL2 route. It must be input in hexadecimal format within 2 and 21 bytes including the prefix H'(H'is 1 byte). It is recommended that the first byte is H'45 (indicating an E.164 address), H'39 (indicating a Any Type DCC address), or H'47 (indicating an ICD address). If the first byte is H'45, then the following seven and a half bytes (that is, 15 digits) must be a BCD code. If the following part, called DSP, are all zeros, this address is called E.164e, for example, Threshold for deciding whether the UE in lowmobility state. After the slow speed timer times out, the UE is considered in lowmobility state if the number of changes of the Interval best cell caused Type by the UE reporting of event 1D during [TSLOWSPDES T] is smaller than [NSLOWSPDES T]. The larger the value is, the more possibly the UE is decided in lowmobility state.

文档密级:

NSAP

Destination ATM address

ADD AAL2RT(Mand atory) ADD NODEB(Manda tory)

-

None

ADD CELLHCSHO( Threshold for Optional) UE slow speed NSlowSpdEst SET decision HCSHO(Option al)

1~16

1~16

8/7/2013

华为机密,未经许可不得扩散

第668页,共3267页

162734118.xls.ms_office1

文档密级:

NullNRI

NullNRI VALUE

NullNRI VALUE indicate SET that ue assign OPERATORCF Interval load other CN GPARA(Option Type node ,when al) NNSF select CN node.

0~1023

0~1023

8/7/2013

华为机密,未经许可不得扩散

第669页,共3267页

162734118.xls.ms_office1

文档密级:

Number of restrained NumberOfAC Access Class s every time

SET DSACAUTOA LGO(Mandator y) ADD CELLDSACM ANUALPARA( Mandatory)

Specifies the number of access classes that are restricted at a Interval time according to Type the flexible polling restriction mode.

1~16

1~16

OAM flow OAMFLOW minimum BW bandwidth

ADD PPPLNK(Optio nal) SET ETHPORT(Opti onal) ADD MPGRP(Option al) ADD IPLOGICPORT (Optional)

This parameter specifies the minimum OAM flow bandwidth.

Interval Type

0~100

0%~100%

8/7/2013

华为机密,未经许可不得扩散

第670页,共3267页

162734118.xls.ms_office1

文档密级:

DSCP of OAMFLOW OAM flow DSCP

SET QUEUEMAP( Mandatory)

This parameter specifies the DSCP value of the OAM flow. The data of the Interval OAM flow enters Type a dedicated queue for transmission rather than queues 1 to 6.

0~63

0 to 63

OAMMINB WKEY

This parameter OAM flow SET specifies the min bandwidth QUEUEMAP(O minimum OAM switch ptional) flow bandwidth switch.

Enumeratio OFF, ON n Type

OFF,ON

Qoffset1 OffQoffset1H offset 2 eavy

Offset of Qoffset1 when neighboring cell load is heavier than that of the center cell (Note: Qoffset1 is used ADD as a priority to Interval CELLPUC(Opti decide which cell Type onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.

-20~20

-20~20

8/7/2013

华为机密,未经许可不得扩散

第671页,共3267页

162734118.xls.ms_office1
Offset of Qoffset1 when neighboring cell load is lighter than that of the center cell (Note: Qoffset1 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Qoffset2 when neighboring cell load is heavier than that of the center cell (Note: Qoffset2 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Qoffset2 when neighboring cell load is lighter than that of the center cell (Note: Qoffset2 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.

文档密级:

Qoffset1 OffQoffset1L offset 1 ight

Interval Type

-20~20

-20~20

Qoffset2 OffQoffset2H offset 2 eavy

Interval Type

-20~20

-20~20

Qoffset2 OffQoffset2L offset 1 ight

Interval Type

-20~20

-20~20

8/7/2013

华为机密,未经许可不得扩散

第672页,共3267页

162734118.xls.ms_office1
Offset of Sintersearch when center cell load level is "Heavy" (Note: Sintersearch is used to decide ADD whether to start CELLPUC(Opti the interonal) frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Sintersearch when center cell load level is "Light" (Note: Sintersearch is used to decide ADD whether to start CELLPUC(Opti the interonal) frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.

文档密级:

Sintersearch OffSinterHea offset 2 vy

Interval Type

-10~10

20~20,step: 2

Sintersearch OffSinterLigh offset 1 t

Interval Type

-10~10

-20~20, step:2

8/7/2013

华为机密,未经许可不得扩散

第673页,共3267页

162734118.xls.ms_office1
Identifying the period of the OLC execution. When overload occurs, execution of OLC can dynamically reduce the cell load. When setting the parameter, consider the hysteresis for SET which the load LDCPERIOD( monitoring Optional) responds to the Interval SET load change. For Type SATLDCPERI example, when OD(Optional) the layer 3 filter coefficient is 6, the hysteresis for which the load measurement responds to the step-function signals is about 2.8s, namely that the system can trace the load control effect about 3 s later after each load

文档密级:

OLC period OlcPeriodTim timer length erLen

100~86400 100~86400 000 000

8/7/2013

华为机密,未经许可不得扩散

第674页,共3267页

162734118.xls.ms_office1
Identity Operator Type,as follows: Primary Operator: Control whether the RAN support some funtion feature and distribute seconder operator's license. Second Operator: the RAN that is controled by primary operator support some ADD funtion feature Operator Type CNOPERATO OperatorType and license. R(Mandatory) Outer Operator: Operator which don't include the Primary , Second operator of the source rnc handover the target RNC to support the mobiling . Common Operator: Common Operator indicate PLMN ID the This parameter specifies the type of transport Opposite channel at the ADD direction peer end for the OppositeTrch TYPRABRLC( transport typical RAB. For Type Mandatory) channel type CS services, this parameter must be set to TRCH_DCH.

文档密级:

PRIM(Prim ary Operator), SEC(Secon dary PRIM,SEC, Enumeratio Operator), OUTER,CO n Type OUTER(Ou MM ter Operator), COMM(Co mmon Operator)

TRCH_DC Enumeratio H, n Type TRCH_HS DSCH

TRCH_DC H, TRCH_HS DSCH

8/7/2013

华为机密,未经许可不得扩散

第675页,共3267页

162734118.xls.ms_office1

文档密级:

MAP_MOD E_LUCEN This parameter T, SET specifies the map Map mode of MAP_MOD OPTDS1MA COPTLNK(Opt mode between the Enumeratio opt and DS1 E_HUAWE PMODE ional) optical port and n Type I, the DS1. MAP_MOD E_ALCAT EL

MAP_MOD E_LUCEN T,MAP_M ODE_HUA WEI,MAP_ MODE_AL CATEL

Optional IE OptionalIESe Send Switch ndSwitch

This parameter SET specifies whether Bit Field SMLC(Optional the IE is reported Type ) to the CN.

R5_PosData _SWITCH, Last_Know n_Service_ Area_SWIT CH

R5_PosData _SWITCH, Last_Know n_Service_ Area_SWIT CH

OPTM

Optical interface standard

This parameter SET specifies the type SDH, Enumeratio OPT(Optional) of the optical SONET n Type port.

SDH, SONET

Azimuth of the semi-major axis of an uncertain Cell Center ADD area in the cell OrientOfMajo Orientation Of SMLCCELL(M center (the rAxis Major Axis andatory) anticlockwise angle from the semi-major axis

Interval Type

0~179

0~179

8/7/2013

华为机密,未经许可不得扩散

第676页,共3267页

162734118.xls.ms_office1
This parameter specifies the operation type of this command. One_touch One_touch One_touch( indicates that this (for all the For all the command is subracks LOD subracks executed on all and boards), Operation type PATCH(Option Enumeratio and boards), boards in all Step_by_Ste al) n Type Step_by_Ste subracks. p (choose p(Choose Step_by_Step step by step by indicates that this step) step) command is executed on the specified patch of a board.

文档密级:

OT

OTDOA ADD Flag of OTDOA OtdoaActivat Method Active SMLCCELL(O location Enumeratio INACTIVE, INACTIVE, eFlag Flag ptional) activation. n Type ACTIVE ACTIVE

OTDOA OTDOAMeth Method Type odType

UE positioning UE_BASE UE_BASE mode when the D, D, OTDOA method UE_ASSIS UE_ASSIS SET is selected. The TED, TED, SMLC(Optional UE supports both Enumeratio UE_BASE UE_BASE ) UE-based n Type D_PREFER D_PREFER OTDOA mode RED, RED, and UE-assisted UE_ASSIS UE_ASSIS OTDOA mode. TED_PREF TED_PREF ERRED ERRED

8/7/2013

华为机密,未经许可不得扩散

第677页,共3267页

162734118.xls.ms_office1
Mobility flag of the overlay network. This flag is valid when the OVERLAY switch is set to ON. When the flag is set to NOT_FORBIDD EN, this means that, when using the H service, the UE can deliver the intraADD FORBIDDE frequency FORBIDDE NRNCCELL(O Enumeratio N, measurement and N,NOT_FO ptional) n Type NOT_FOR handover to the RBIDDEN BIDDEN DRNC cell, which can be used as the target cell of interfrequency handover. When the flag is set to FORBIDDEN, this means that, when using the H service, the UE cannot deliver the intra-frequency measurement and

文档密级:

OverLay OverLayMobi Network lityFlag Mobility Flag

AAL2 Path OWNERSHI ownership P

ADD Ownership of the PEER, AAL2PATH(O Enumeratio AAL2 Path. LOCAL ptional) n Type

PEER, LOCAL

Destination OWNERSHI ATM address P ownership

Indicating NO(ATM_ whether the ADDRESS destination ATM _DOES_N address is the OT_BELO adjacent node NG_TO_T ADD specified by HIS_ADJA AAL2RT(Optio [ANI]. If the two Enumeratio NO,YES CENT_NO nal) nodes are the n Type DE), same, set this YES(ATM_ parameter to ADDRESS YES. If they are _BELONG different, set this S_TO_THI parameter to NO. S_ADJACE

8/7/2013

华为机密,未经许可不得扩散

第678页,共3267页

162734118.xls.ms_office1
For IUPS Path,this parameter must be ENABLED.Other Paths have ADD IP Path check default value IPPATH(Option Enumeratio ENABLED, ENABLED, flag DISABLED.If al) n Type DISABLED DISABLED this parameter is set to ENABLED,then [Check IP address] must be specified.

文档密级:

PATHCHK

PATHID

ADD AAL2PATH(M andatory) ACT AAL2 Path ID VCLCC(Manda tory) LOP VCL(Mandator y)

Identifying an AAL2 path between two AAL2 nodes. For the same AAL2 Interval path, the path IDs Type configured in the two AAL2 nodes must be the same and cannot be 0.

1~4294967 1~4294967 295 295

PATHID

IP Path ID

ADD IPPATH(Manda tory) ACT Identifying an IP Interval IPPM(Mandator path. Type y) ADD IPPATHBIND( Mandatory)

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第679页,共3267页

162734118.xls.ms_office1
QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQ_QOS, Enumeratio LQ_BE, n Type LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF

文档密级:

PATHT

IP path type

ADD Type of the IP IPPATH(Option path. al)

PATTYPE

Patch Type.

This parameter LOD specifies the type PATCH(Manda of patch to be Enumeratio NP, DSP tory) loaded to the n Type DPUb board.

NP,DSP

8/7/2013

华为机密,未经许可不得扩散

第680页,共3267页

162734118.xls.ms_office1
Offset of the PCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the paging message properly. This problem affects the coverage of the downlink ADD common channel Interval PCH(Optional) and furthermore Type the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS

文档密级:

PCHPower

PCH power

-350~150

-35~15, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第681页,共3267页

162734118.xls.ms_office1
TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. For the cells to be covered, the ADD downlink PCPICH(Option coverage should PCPICH al) be guaranteed as Interval PCPICHPowe transmit power ADD a premise. For the Type r QUICKCELLS cells requiring ETUP(Optional) soft handover area, this parameter should satisfy the proportion of soft handover areas stipulated in the network planning. If the maximum transmit power of the PCPICH is configured too large, the cell capacity will be

文档密级:

-100~500

-10~50, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第682页,共3267页

162734118.xls.ms_office1

文档密级:

Pilot power PCPICHPowe adjustment rPace step

Pilot power adjustment step increased or decreased in each increase of the cell breathing algorithm or decrease of cell pilot. If the value is too great, the cell pilot may change fiercely, which is easy to lead to user call ADD drops. If the value Interval CELLLDB(Opti is too small, the Type onal) cell pilot may change smoothly. However, the response speed of the cell breathing algorithm is decreased, impacting the algorithm performance. For detailed information of this parameter, refer to 3GPP TS 25.433.

0~100

0~10, step:0.1

8/7/2013

华为机密,未经许可不得扩散

第683页,共3267页

162734118.xls.ms_office1
This parameter specifies the peak rate. 1. Physical unit: cell/s or kbit/s 2. The peak rate cannot exceed the maximum bandwidth of the bearer such as the IMA group, UNI link, or optical ADD Interval port. Peak cell rate ATMTRF(Opti 3. The peak rates Type onal) for different types of services are as follows: CBR: 71 to 353207 (UT = CELL/S)/30 149759 (UT = KBIT/S); RTVBR/NRTVB R/UBR: 71 to 70754 (UT = CELL/S)/30 30000 (UT =

文档密级:

PCR

30~353207

30 to 353207

8/7/2013

华为机密,未经许可不得扩散

第684页,共3267页

162734118.xls.ms_office1
Power control switch. 1) PC_AMR_MOD E_INDUCE_BLE R_ALTER_SWIT CH: When the switch is on, the target BLER value of the AMR speech service is the target BLER value of each mode in the SET AMRC parameter Power control CORRMALGO table. When the Bit Field switch SWITCH(Optio switch is not on, Type nal) the target BLER value of the AMR speech service is the target BLER value specified in TYPRAB. 2) PC_DL_INNER_ LOOP_PC_ACTI VE_SWITCH: When the switch is on, the status of inner loop DL power control is set to "Active."

文档密级:

PcSwitch

PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH, PC_EFACH _ECN0_DY N_ADJ_S WITCH, PC_FP_MU LTI_RLS_I ND_SWIT CH, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH, PC_HSUPA _PO_UPDA TE_SWITC

PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH, PC_EFACH _ECN0_DY N_ADJ_S WITCH, PC_FP_MU LTI_RLS_I ND_SWIT CH, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH, PC_HSUPA _PO_UPDA TE_SWITC

PENDING PDTMRVAL timer UE

ADD PENDING time M3LKS(Option length of M3UA al) link set.

Interval Type

1~10

1~10

PDUPrid

PDU Send Prid

This parameter ACT specifies the 10, 20, 50, 10,20,50,10 ETHOAMAH( period of sending Enumeratio 100, 200, 0,200,500,1 Optional) EthOAM PDU n Type 500, 1000 000 packets.

PDUSize

This parameter specifies the ACT length of an PDU Pkt Len ETHOAMAH( EthOAM PDU Optional) packet.

Interval Type

64~1024

64 to 1025

8/7/2013

华为机密,未经许可不得扩散

第685页,共3267页

162734118.xls.ms_office1
Indicating the corresponding peer cell ID of the Interval cell in a Type RNCPOOL in RNC Node Redundancy function.

文档密级:

PeerCellId

Peer Cell ID

ADD QUICKCELLS ETUP(Mandato ry) ADD CELLSETUP( Mandatory)

0~65535

0~65535

PEERIP

Peer IP address

ADD This parameter IP Address PPPLNK(Mand specifies the peer Type atory) IP address.

0.0.0.0~255 .255.255.25 5

PEERIP

Peer IP address

This parameter ADD specifies the peer IP Address MPGRP(Manda IP address for the Type tory) MLPPP group.

0.0.0.0~255 .255.255.25 5

PEERIP

Peer IP

This parameter STR specifies the IP Address IPLOPTST(Ma destination IP Type ndatory) address of the IP loopback test.

0.0.0.0~255 .255.255.25 5

PEERIP1

First destination IP address

First destination ADD IP address. 0 IP Address SCTPLNK(Man indicates an Type datory) invalid value.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第686页,共3267页

162734118.xls.ms_office1

文档密级:

PEERIP2

Second destination IP address

Second ADD destination IP SCTPLNK(Opti address. 0 onal) indicates an invalid value.

IP Address Type

0.0.0.0~255 .255.255.25 5

Peer IP PEERIPADD address R

ADD IPOAPVC(Man datory) LOP This parameter IP Address VCL(Mandator specifies the peer Type y) IP address. ACT VCLCC(Manda tory)

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第687页,共3267页

162734118.xls.ms_office1

文档密级:

Peer IP PEERIPADD address R

Peer IP address. This parameter ADD cannot be equal to IP Address IPPATH(Manda the local IP Type tory) address configured in the RNC.

0.0.0.0~255 .255.255.25 5

PeerIsValid

Peer Cell Is Valid Or Not

ADD QUICKCELLS Indicating peer ETUP(Optional) cell is valid or ADD not. CELLSETUP(O ptional)

INVALID(I Valid, Enumeratio nvalid), Invalid n Type VALID(Val id)

8/7/2013

华为机密,未经许可不得扩散

第688页,共3267页

162734118.xls.ms_office1

文档密级:

PEERMASK

Peer subnet mask

ADD Peer subnet IPPATH(Option mask. al)

IP Address Type

0.0.0.0~255 .255.255.25 5

PeerNodebId

Peer NodeB ID

This parameter specifies the NodeB ID configured in another RNC of the RNC POOL. ADD In RNC Node Interval NODEB(Manda Redundancy Type tory) function, the two RNCs form an RNC POOL and the same physical NodeB is configured in both RNCs.

0~65535

0~65535

PEERPN

ADD Destination Destination port Interval SCTPLNK(Man SCTP port No. of the SCTP link. Type datory)

1024~6553 1024~6553 5 5

PeerRncId

This parameter ADD specifies the RNC Interval Peer RNC ID NODEB(Manda ID of the peer Type tory) RNC in the RNC POOL.

0~4095

0~4095

8/7/2013

华为机密,未经许可不得扩散

第689页,共3267页

162734118.xls.ms_office1

文档密级:

PEERT

Peer type

This parameter ADD specifies the peer IUB, IUPS, IUB, IUPS, IPOAPVC(Man Enumeratio type of IPoA OTHER OTHER datory) n Type PVC.

ADD CELLINTERR ATHOCOV(Op tional) ADD CELLINTERR Inter-Rat HO ATHONCOV( physical PenaltyTimeF Optional) channel failure orPhyChFail SET penalty timer INTERRATHO COV(Optional) SET INTERRATHO NCOV(Optional )

The length of the penalty timer of Inter-Rat handover failure due to physical channel failure. No try of InterInterval Rat handover will Type be taken until penalty finishes. Also see parameter InterRatPhyChFai lNum.

0~65535

0~65535

Inter-RAT PenaltyTimer Penalty timer length

Strech for penalty of interRAT handover ADD failure. No try of CELLMBDRIN Interval inter-RAT TERRAT(Optio Type handover to the nal) penalty cell will be taken until penalty finishes.

0~300

0~300

8/7/2013

华为机密,未经许可不得扩散

第690页,共3267页

162734118.xls.ms_office1
This parameter specifies the pending-timeafter-trigger for traffic-related event 4A on DCH. The trafficrelated event 4A on DCH is not reported again during the time defined by this parameter after D250, such an event is D500, reported. This ADD D1000, Pending time parameter is set to PendingTime TYPRABDCC Enumeratio D2000, after trigger 4A avoid too many 4A CMC(Optional) n Type D4000, channel D8000, reconfiguration D16000 operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4A on DCH to the next reporting, and the smaller the possibility of triggering traffic-

文档密级:

250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第691页,共3267页

162734118.xls.ms_office1
This parameter specifies the pending-timeafter-trigger for traffic-related event 4B on DCH. The trafficrelated event 4B on DCH is not reported again during the time defined by this parameter after D250, such an event is D500, reported. This ADD D1000, Pending time parameter is set to PendingTime TYPRABDCC Enumeratio D2000, after trigger 4B avoid too many 4B CMC(Optional) n Type D4000, channel D8000, reconfiguration D16000 operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4B on DCH to the next reporting, and the smaller the possibility of triggering traffic-

文档密级:

250, 500, 1000, 2000, 4000, 8000, 16000

Event A PendingTime pending time A after trigger

This parameter specifies the number of pending periods ADD after event A is Interval TYPRABRLC( triggered. During Type Optional) the pending time, no event related to retransmission ratio is reported.

0~1000

0~1000

8/7/2013

华为机密,未经许可不得扩散

第692页,共3267页

162734118.xls.ms_office1

文档密级:

Event B PendingTime pending time B after trigger

This parameter specifies the number of pending periods ADD after event B is Interval TYPRABRLC( triggered. During Type Optional) the pending time, no event related to retransmission ratio is reported.

0~1000

0~1000

PERIOD

Ping Check Period

ADD IP Path Ping IPPATH(Option Period. al)

Interval Type

1~60

1~60

8/7/2013

华为机密,未经许可不得扩散

第693页,共3267页

162734118.xls.ms_office1

文档密级:

ADD CELLINTERFR EQHOCOV(Op 2B event retry tional) PeriodFor2B period SET INTERFREQH OCOV(Optional )

2B event retry period. This parameter defines the length of the event 2B retry period. The smaller the value of this parameter, the more frequent the handover retry due to interfrequency handover failure, and the faster the Interval UE to be Type successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system.

1~64

500~32000, Step:500

8/7/2013

华为机密,未经许可不得扩散

第694页,共3267页

162734118.xls.ms_office1

文档密级:

Retry period for the event 2C. This parameter defines the length of the event 2C retry period. The smaller the value of this parameter, the ADD more frequent the CELLINTERFR handover retry EQHONCOV( due to inter2C event retry Optional) frequency Interval PeriodFor2C period SET handover failure, Type INTERFREQH and the faster the ONCOV(Option UE to be al) successfully handed over to the target cell whose load is restored. In this case, however, frequent handover retry brings more load to the RNC system. Retry period for the event 3A. This parameter defines the length of the event 3A retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the Interval UE to be Type successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system.

1~64

500~32000, Step:500

ADD CELLINTERR ATHOCOV(Op 3A event retry PeriodFor3A tional) period SET INTERRATHO COV(Optional)

1~64

500~32000, Step:500

8/7/2013

华为机密,未经许可不得扩散

第695页,共3267页

162734118.xls.ms_office1

文档密级:

Retry period for the event 3C. This parameter defines the length of the event 3C retry period. The smaller the value of this parameter, the more frequent the handover retry ADD due to inter-RAT CELLINTERR handover failure, ATHONCOV( and the faster the 3C event retry Optional) Interval PeriodFor3C UE to be period SET Type successfully INTERRATHO handed over to NCOV(Optional the target cell ) whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system. This parameter specifies the number of reporting times of event 1A for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. This parameter specifies the number of reporting times of event 1C for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends.

1~64

500~32000, Step:500

1A event to PeriodMRRe periodical rpt portNumfor1 number A

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional)

D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY

1, 2, 4, 8, 16, 32, 64, INFINITY

1C event to PeriodMRRe periodical rpt portNumfor1 number C

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional)

D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY

1, 2, 4, 8, 16, 32, 64, INFINITY

8/7/2013

华为机密,未经许可不得扩散

第696页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1J for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. Period common measurement protection timer coefficient. Timer length of common measurement report protection = max (10000, this parameter x common measurement report period). The unit is ms. The common measurement report protection timer indicates the maximum length between two valid common measurement reports. If the real time exceeds the timer length of common measurement report protection, the common measurement is faulty and a new one is set up. For

文档密级:

1J event to PeriodMRRe periodical rpt portNumfor1J number

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional)

D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY

1, 2, 4, 8, 16, 32, 64, INFINITY

Period common PeriodProtect measure TimerCoeff protect timer coeff

SET LDM(Optional) SET SATLDM(Opti onal)

Interval Type

2~65535

2~65535

8/7/2013

华为机密,未经许可不得扩散

第697页,共3267页

162734118.xls.ms_office1
It is used to calculate the corresponding dynamic persist scaling factor for D0.9, D0.8, ASC2~ASC7. It ADD 0.9, 0.8, Persist Scaling D0.7, D0.6, is valid for ASC2PersistScaling PRACHASC(M Enumeratio 0.7, 0.6, 0.5, Factor D0.5, D0.4, ASC7 only and Factor andatory) n Type 0.4, 0.3, 0.2 D0.3, D0.2 mandatory. For detailed information of this parameter, refer to 3GPP TS 25.214. Disable(Not support Protocol field compress), Enable(Sup port Protocol field compress)

文档密级:

PFC

This parameter ADD specifies whether PPPLNK(Optio to enable the Protocol field nal) Disable, protocol field Enumeratio compress ADD Enable compression n Type MPLNK(Option switch for the al) PPP link.

PHB

PHB

This parameter ACT specifies the PHB Bit Field IPPM(Mandator to be activated Type y) with the IP PM.

BE(BE), AF11(AF11 ), AF12(AF12 ), AF13(AF13 ), AF21(AF21 ), AF22(AF22 ), AF23(AF23 ), AF31(AF31 ), AF32(AF32 ), AF33(AF33 ), AF41(AF41 ), AF42(AF42 ), AF43(AF43 ), EF(EF)

BE,AF11,A F12,AF13, AF21,AF22 ,AF23,AF3 1,AF32,AF 33,AF41,A F42,AF43,E F

8/7/2013

华为机密,未经许可不得扩散

第698页,共3267页

162734118.xls.ms_office1

文档密级:

PHB

Per-Hop Behavior

SET PHBMAP(Man PHB value. datory)

BE, AF11, AF12, AF13, AF21, AF22, AF23, Enumeratio AF31, n Type AF32, AF33, AF41, AF42, AF43, EF

BE AF11 AF12 AF13 AF21 AF22 AF23 AF31 AF32 AF33 AF41 AF42 AF43 EF

8/7/2013

华为机密,未经许可不得扩散

第699页,共3267页

162734118.xls.ms_office1
ADD SCCPCHBASI C(Mandatory) ADD PCCPCH(Optio nal) ADD AICH(Optional) ADD RACH(Optional ) ADD PCPICH(Option al) ADD SCCPCHTFC( Mandatory) ADD PCH(Mandatory ) ADD PRACHACTO ASCMAP(Opti onal) ADD PRACHSLOTF ORMAT(Optio nal) ADD PRACHASC(O ptional) ADD ADD CELLMCCH( Mandatory)

文档密级:

PhyChId

SCCPCH ID

Uniquely identifying a Interval common physical Type channel in a cell.

0~255

0~255

SCCPCH ID PhyChIdforM for MCCH cch

ID of the physical channel Interval carrying the Type MCCH. Interval Type

1~255

1~255

PICHId

PICH ID

Uniquely ADD identifying a PICH(Optional) PICH in a cell.

0~255

0~255

PICHMode

PICH mode

Indicating the number of PIs contained in each frame of the ADD V18, V36, 18, 36, 72, PICH For detailed Enumeratio PICH(Optional) V72, V144 144 information of n Type this parameter, refer to 3GPP TS 25.211.

8/7/2013

华为机密,未经许可不得扩散

第700页,共3267页

162734118.xls.ms_office1
Difference between the transmit power of PICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the paging indication properly. This problem may cause a misoperation of reading the PCH, waste the battery of the UE, affect the coverage of the downlink common channel, and finally affect the cell coverage. If the value is too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to This parameter specifies the number of the slot that holds the PIU. This parameter specifies the number of packets for starting the EthOAM loopback test. This parameter specifies the length of packet for starting the EthOAM loopback test. This parameter specifies the maximum length of a loopback packet.

文档密级:

PICH power PICHPowerO offset ffset

ADD CHPWROFFSE T(Optional)

Interval Type

-10~5

-10~5

PIUSN

Piu Slot No.

STR IPLOPTST(Ma ndatory)

Interval Type

14~27

14 to 27

PKTCOUNT PKT Count

STR ETHOAMLOO PTST(Optional)

Interval Type

5~64

5 to 64

PKTLEN

PKT Size

STR ETHOAMLOO PTST(Optional)

Interval Type

64~1024

64 to 1024

Max Packet PKTMAXLE Length N

STR IPLOPTST(Opt ional)

Interval Type

10~1500

10 to 1500

8/7/2013

华为机密,未经许可不得扩散

第701页,共3267页

162734118.xls.ms_office1

文档密级:

PKTSIZE

PING Size of packet IP(Optional)

This parameter specifies the size Interval of the ping Type packets.

20~1024

20 to 1024

PKTSIZE

PKT Size

This parameter PING Interval specifies the size MAC(Optional) Type of a sent packet.

95~512

95 to 512

Max PLMN PlmnValTag value tag Max

Maximum PLMN tag value corresponding to ADD a LAC. It is LAC(Mandator defined by the y) Interval operator. For ADD Type detailed RAC(Mandator information of y) this parameter, refer to 3GPP TS 25.331.

1~256

1~256

Min PLMN PlmnValTag value tag Min

Minimum PLMN tag value corresponding to ADD a LAC. It is LAC(Mandator defined by the y) Interval operator. For ADD Type detailed RAC(Mandator information of y) this parameter, refer to 3GPP TS 25.331.

1~256

1~256

8/7/2013

华为机密,未经许可不得扩散

第702页,共3267页

162734118.xls.ms_office1

文档密级:

PLPRD

This parameter ADD specifies the Packet lost IPLOGICPORT period of measure period (Optional) measuring the packet loss rate.

Interval Type

1~100

100~10000

PLTH

This parameter ADD specifies the Packet discard IPLOGICPORT threshold of threshold (Optional) discarding packets.

Interval Type

0~1000

0~1000

PMPRD

IPPM packet send period

This parameter specifies the ACT interval for IPPM(Optional) sending IP PM packets.

Interval Type

1~100

100 to 10000

8/7/2013

华为机密,未经许可不得扩散

第703页,共3267页

162734118.xls.ms_office1
SET ETHPORT(Opti onal) SET MSPCMD(Man datory) CLR MSPREP(Optio nal) SET OPTLOP(Mand atory) SWP ETHPORT(Ma ndatory) SET MSP(Mandator y) ACT MSP(Optional) SET OPT(Optional) SET COPTLNK(Ma ndatory) ACT ETHPORT(Ma ndatory) ADD ETHREDPORT (Mandatory) ADD

文档密级:

PN

Port No.

This parameter specifies the number of an Ethernet port.

Interval Type

0~7

FG2a board: 0 to 7, GOUa board: 0 to 1

PN

Port No.

SET This parameter Interval SCUPORT(Opti specifies the Type onal) number of a port. For the FG2a board, the port number ranges ACT Interval from 0 to 7. For ETHOAMAH( the GOUa board, Type Mandatory) the port number ranges from 0 to 1. This parameter specifies the number of the ADD Interval physical port ETHMEP(Optio Type where the local nal) MEP in the current MA resides.

0,2,4,6,8

0,2,4,6,8

PN

Port No.

0~7

0 to 7

PN

Port NO.

0~7

0 to 7

8/7/2013

华为机密,未经许可不得扩散

第704页,共3267页

162734118.xls.ms_office1

文档密级:

PN

Port No.

STR This parameter ETHOAMLOO Interval specifies the PTST(Mandator Type number of a port. y)

0~7

0 to 7

PN

Port No.

This parameter STR specifies the IPCHK(Mandat number of an ory) Ethernet port.

Interval Type

0~7

For the FG2a board, the value range of PN is 0 to 7. For the GOUa board, the value range of PN is 0 to 1.

PN

Port No.

SET This parameter Interval ALMPORT(Ma specifies the Type ndatory) number of a port.

1~32

1 to 32

This parameter ADD Rollbackpoint specifies the POINTDESI ROLLBACKP String Type Description description of the NFO OINT(Optional) rollback point.

0 to 250 characters

ADD Rollbackpoint ROLLBACKP POINTNAM Name OINT(Mandator E y)

This parameter specifies the name of the rollback point.

String Type -

1 to 250 characters

8/7/2013

华为机密,未经许可不得扩散

第705页,共3267页

162734118.xls.ms_office1

文档密级:

Poll timer PollTimerLen length

Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are removed from the queue and this user fails in access. Among all the unexpired users, resources SET are allocated in Interval QUEUEPREE the order of high Type MPT(Optional) priority to low priority. If resource allocation is successful, the user succeeds in access and traverse of this queue is stopped. Otherwise, the rest users are traversed until all the unexpired users go through this.

1~80

10~800

POLLTMR

Timer_Poll

Interval for sending POLL message.It ADD generally Interval SAALLNK(Opt indicates the Type ional) duration of a message arrives at the peer end and returns.

50~10000

UNI: 500~10000 NNI: 90~500

Port

Destination Port

This parameter specifies the port ADD provided the FTP Interval FTPSCLTDPO server to be Type RT(Mandatory) accessed by the FTP client.

21~65535

21~65535

8/7/2013

华为机密,未经许可不得扩散

第706页,共3267页

162734118.xls.ms_office1

文档密级:

Port protocol PORTPROT type YPE

ADD This parameter PORTFLOWC specifies the TRLPARA(Ma protocol type of ndatory) the port.

Enumeratio IP, ATM n Type

IP, ATM

PORTTYPE

Port Type

This parameter specifies the type of the physical port where the ADD ETHER, local MEP in an ETHMEP(Man Enumeratio TRUNK MA resides. "FE" datory) n Type indicates an FE port. "TRUNK" indicates a Trunk group.

ETHER,TR UNK

Switch for POWER_RE Relay 1 LAY1

This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 1. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 2. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 3. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 4. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 5. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 6. n Type OPEN(Ope EN n)

Switch for POWER_RE Relay 2 LAY2

Switch for POWER_RE Relay 3 LAY3

Switch for POWER_RE Relay 4 LAY4

Switch for POWER_RE Relay 5 LAY5

Switch for POWER_RE Relay 6 LAY6

8/7/2013

华为机密,未经许可不得扩散

第707页,共3267页

162734118.xls.ms_office1
The power offset between the last access preamble and the message control part. The power of the message control part can be obtained by adding the offset to the access preamble power. If the value is ADD excessively low, Interval PRACHTFC(M the uplink Type andatory) interference may increase, and the uplink capacity may be affected. If the value is set too high, coverage may be affected. For detailed information of this parameter, refer to 3GPP TS 25.213.

文档密级:

PowerOffsetP Power offset pm

-5~10

-5~10

8/7/2013

华为机密,未经许可不得扩散

第708页,共3267页

162734118.xls.ms_office1
The power increase step of the random access preambles transmitted before the UE receives the acquisition indicator in the random access process. If the value of Power increase step is too large, the access procedure will be shortened, ADD but it is more Interval PRACHBASIC( likely to cause Type Optional) power waste. If it is too small, the access procedure will be lengthened, but transmit power will be saved. This parameter must be set carefully. In addition, the higher the parameter value is, the smaller impact

文档密级:

Power PowerRampSt increase step ep

1~8

1~8

8/7/2013

华为机密,未经许可不得扩散

第709页,共3267页

162734118.xls.ms_office1

文档密级:

PPP Dhcp PPPDHCPSV Server IP RIP

This parameter ADD specifies the PPP IP Address NODEBESN(M port IP address Type andatory) for the DHCP server.

0.0.0.0~255 .255.255.25 5

PPPLNK

PPP link No.

This parameter ADD specifies the Interval IPLOGICPORT number of a PPP Type (Mandatory) link. ADD PPPLNK(Optio nal) ADD MPLNK(Manda tory)

0~3

0~3

PPPLNKN

PPP link No.

This parameter specifies the Interval number of a PPP Type link.

0~167

UOIa(0~3), POUa(0~16 7), PEUa(0~12 7)

PPPMUX

PPP mux

If this parameter is set to Enable, the frame ADD multiplexing over PPPLNK(Optio the PPP link is nal) Disable, Enumeratio enabled. If this ADD Enable parameter is set to n Type MPGRP(Option Disable, the al) frame multiplexing over the PPP link is

Disable(Not support PPP mux),Enabl e(Support PPP mux)

8/7/2013

华为机密,未经许可不得扩散

第710页,共3267页

162734118.xls.ms_office1

文档密级:

PQNUM

This parameter is valid only when the port flow ADD control type is IP. Priority queue PORTFLOWC The "PQNUM" of Interval number TRLPARA(Ma an ATM queue is Type ndatory) "2" by default. You cannot change the default value.

0~5

0 to 5

PRACHPhyC PRACH ID hId

ADD AICH(Optional)

Interfrequency PrdReportInte measure rval periodical rpt period

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)

Uniquely identifying a PRACH in a cell corresponding to the AICH. Inter-frequency measurement reporting interval. In periodical report mode, the interval between two reports is the configured value. However, it is not recommended that the value "NON_PERIODI C_REPORT" be set, upon which the UE behaviour is not defined. This parameter has impact on the Uu signaling flow. If the interval is too short and the frequency is too high, the RNC may have burden in processing signaling. If the interval is too long, the network cannot detect the signal change in time, which may

Interval Type

0~255

0~255

NON_PERI ODIC_REP ORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 Enumeratio D3000~5 n Type D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000

NON_PERI ODIC_REP ORT,250,50 0,1000,2000 ,3000,4000, 6000,8000,1 2000,16000, 20000,2400 0,28000,320 00,64000

8/7/2013

华为机密,未经许可不得扩散

第711页,共3267页

162734118.xls.ms_office1
The maximum number of preambles transmitted in a preamble ramping cycle. If the value of Max preamble retransmission is too small, the preamble power may fail to ramp to the required value. This may ADD Max preamble result in UE Interval PreambleRetr PRACHBASIC( retransmission access failure. If Type ansMax Optional) it is too large, the UE will repeatedly increase the power and make access attempts, which may result in interference to other UEs. For detailed information of this parameter, refer to 3GPP TS

文档密级:

1~64

1~64

8/7/2013

华为机密,未经许可不得扩散

第712页,共3267页

162734118.xls.ms_office1

文档密级:

Preamble PreambleSign signatures atures

Sequence No. of an available preamble signature. A maximum of 16 ADD signatures (from Bit Field PRACHBASIC( signature 0 to 15) Type Mandatory) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.213.

SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, SIGNATU RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7, SIGNATU RE8, SIGNATU RE9, SIGNATU RE10, SIGNATU RE11, SIGNATU RE12, SIGNATU RE13, SIGNATU RE14, SIGNATU

SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, SIGNATU RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7, SIGNATU RE8, SIGNATU RE9, SIGNATU RE10, SIGNATU RE11, SIGNATU RE12, SIGNATU RE13, SIGNATU RE14, SIGNATU

Preempt PreemptAlgo algorithm Switch switch

Indicating SET whether QUEUEPREE preemption is MPT(Optional) supported.

Enumeratio OFF, ON n Type

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第713页,共3267页

162734118.xls.ms_office1
Indicating whether ARPbased preemption between TCs is supported. This switch only has impact on the TCbased priorities. When the priority is based on the TC and the switch is enabled, for the following two situations, the preempting SET service should PreemptRefA PreemptRefAr QUEUEPREE have a higher rpSwitch pSwitch MPT(Optional) priority and ARP priority than the preempted service does: 1.The preempting service is the streaming service and the preempted service is the interactive or background service. 2. The preempting service is the interactive service 1.There are three block priorities: high, normal and low. 2.High priority: Blocking a cell immediately. 3.Normal priority: Blocking a cell once there are no BLK Priority Block priority users in it within CELL(Optional) a specified time, or blocking it even if there are some users when the specified time expires. 4.Low priority: Blocking a cell when there are no users in the cell.

文档密级:

Enumeratio OFF, ON n Type

OFF, ON

HIGH(High priority), HIGH, NORMAL( Enumeratio NORMAL, Normal n Type LOW priority), LOW(Low priority)

8/7/2013

华为机密,未经许可不得扩散

第714页,共3267页

162734118.xls.ms_office1
This parameter ADD specifies the IPRT(Mandator priority of an IP y) route.

文档密级:

PRIORITY

Priority

HIGH, Enumeratio LOW n Type

HIGH, LOW

PRIORITY

ADD MTP3LNK(Opt Signalling link ional) priority ADD M3LNK(Option al)

Priority of the signalling link. 0 Interval indicates the Type highest priority.

0~99

0~99

PRIORITY

ADD MTP3RT(Optio Route priority. 0 nal) Interval Route priority indicates the ADD Type highest priority. M3RT(Optional )

0~99

0~99

8/7/2013

华为机密,未经许可不得扩散

第715页,共3267页

162734118.xls.ms_office1
Reference used to determine which priority is arranged first in the priority sequence. If the ARP is preferably used, the priority sequence is gold > silver > copper. If the ARPs are all the same, the TrafficClass is used and the SET priority sequence ARP, USERPRIORIT Enumeratio ARP,Traffic is conversational TrafficClass Y(Optional) n Type Class > streaming > interactive > background. If the TrafficClass is preferably used, the priority sequence is conversational > streaming > interactive > background. If the TrafficClass factors are all the same, the ARP

文档密级:

Integrate Priority PriorityRefere Configured nce Reference

8/7/2013

华为机密,未经许可不得扩散

第716页,共3267页

162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for extension services, such as CMB and MBMS. The value 0 means that these cells do not support extension services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, extension services are preferably absorbed by this group of cells. This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSDPA services. The value 0 means that these cells do not support HSDPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSDPA are preferably absorbed by this group of cells.

文档密级:

Service PriorityServic priority of eForExtRab Other service

ADD SPG(Optional)

Interval Type

0~7

0~7

Service priority of PriorityServic HSDPA eForHSDPA service

ADD SPG(Optional)

Interval Type

0~7

0~7

8/7/2013

华为机密,未经许可不得扩散

第717页,共3267页

162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSUPA services. The value 0 means that these cells do not support HSUPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSUPA services are preferably absorbed by this group of cells. This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 non-real-time services. The value 0 means that these cells do not support R99 non-real-time services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 non-real-time services are preferably absorbed by this group of cells.

文档密级:

Service priority of PriorityServic HSUPA eForHSUPA service

ADD SPG(Optional)

Interval Type

0~7

0~7

Service ADD PriorityServic priority of R99 SPG(Optional) eForR99NRT NRT service

Interval Type

0~7

0~7

8/7/2013

华为机密,未经许可不得扩散

第718页,共3267页

162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 real-time services. The value 0 means that these cells do not support R99 real- Interval time services. The Type value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 real-time services are preferably absorbed by this group of cells. This parameter specifies the processing duration of the cell blocking in the RNC.

文档密级:

Service ADD PriorityServic priority of R99 SPG(Optional) eForR99RT RT service

0~7

0~7

Processing ProcessDurati duration on

ADD RNCALLCELL BLK(Mandator y)

Interval Type

2~30

2~30

8/7/2013

华为机密,未经许可不得扩散

第719页,共3267页

162734118.xls.ms_office1
1) INVOKE_TRAC E_SWITCH. When it is checked, RNC will start Invoke Trace procedure upon receiving INVOKE TRACE Message form CN, otherwise, RNC won't start the Invoke Trace procedure though SET it receives the Process switch RRCTRLSWIT INVOKE CH(Mandatory) TRACE message. 2) SYS_INFO_UPD ATE_FOR_IU_R ST. When it is checked, RNC will broadcast SYSTEM INFORMATION messages to UE when Iu reset, otherwise, RNC won't broadcast SYSTEM INFORMATION SS7 protocol type supported by the DSP. ITUT: International Telecommunicati on Union Telecommunicati on ADD Standardization SS7 protocol N7DPC(Option Sector type al) ANSI: American National Standards Institute TTC: THE TELECOMMUN ICATION TECHNOLOGY COMMITTEE (use for JAPAN).

文档密级:

PROCESSS WITCH

Bit Field Type

INVOKE_T RACE_SWI TCH, SYS_INFO _UPDATE_ FOR_IU_R ST, DRNC_DIR ECT_DSCR , RNC_SHA RE_SWITC H, RNCAP_I MSI_HO_S WITCH, TERMINA L_VERSIO N_DEBAS E_SWITCH , SYS_HO_O UT_CIPHE R_SWITCH , SYS_HO_C IPHER_CO NFIG, BARRED_ CELL_FOR _CSDOMA

This parameter is set to 0 or 1 according to the related domains.

PROT

ITUT, ITUT, Enumeratio ANSI, TTC ANSI, TTC n Type

8/7/2013

华为机密,未经许可不得扩散

第720页,共3267页

162734118.xls.ms_office1
If the background Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET Interval request to RRC PSINACTTIME Type layer,if the R(Optional) Background Radio Access Bear haven't been released until the Background service T2 timeout, the PDCP layer will resend release request indication.

文档密级:

Background ProtectTmrFo service T2 rBac

0~60

0~60

If the Conversational Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval ProtectTmrFo Conversational PSINACTTIME layer, if the Type rCon service T2 R(Optional) Conversational Radio Access Bear haven't been released until the Conversational service T2 timeout, the PDCP layer will resend release request indication.

0~60

0~60

8/7/2013

华为机密,未经许可不得扩散

第721页,共3267页

162734118.xls.ms_office1

文档密级:

If the IMS Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2, after sending SET release request to Interval ProtectTmrFo IMS signal T2 PSINACTTIME RRC layer, if the Type rImsSig R(Optional) IMS Radio Access Bear for signal haven't been released until the IMS service T2 timeout, the PDCP layer will resend release request indication.

0~60

0~60

Interactive ProtectTmrFo service T2 rInt

If the Interactive Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval PSINACTTIME layer, if the Type R(Optional) Interactive Radio Access Bear haven't been released until the Interactive service T2 timeout, the PDCP layer will resend release request indication.

0~60

0~60

8/7/2013

华为机密,未经许可不得扩散

第722页,共3267页

162734118.xls.ms_office1

文档密级:

Streaming ProtectTmrFo service T2 rStr

If the Streaming Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval PSINACTTIME layer, if the Type R(Optional) Streaming Radio Access Bear haven't been released until the Streaming service T2 timeout, the PDCP layer will resend release request indication.

0~60

0~60

PS

Port select

This parameter ALL(Select SET specifies whether all ports), OPT(Mandatory to select a single Enumeratio SINGLE(Se ALL,SING ) port or all ports n Type lect one LE on a board. port)

Handover PsBeProcTyp Type for PS e BE Traffic

Indicating whether to replace relocation CORRM_S CORRM_S ADD procedure with RNSR_PSB RNSR_PSB NRNC(Optional DSCR procedure Enumeratio E_RELOC, E_RELOC, ) between the RNC n Type CORRM_S CORRM_S and the RNSR_PSB RNSR_PSB neighboring RNC E_DSCR E_DSCR for PS BE

8/7/2013

华为机密,未经许可不得扩散

第723页,共3267页

162734118.xls.ms_office1

文档密级:

PSBKGDL

R99 PS background service downlink factor

R99 PS ADD background Interval TRMFACTOR( service downlink Type Optional) factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第724页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS PSBKGPRIP background ATH primary path

ADD R99 PS TRMMAP(Opti background onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

R99 PS R99 PS ADD background background pri PSBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第725页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS PSBKGSECP background TRMMAP(Opti background ATH secondary path onal) secondary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

PSBKGSEC WHT

R99 PS ADD background pri LOADEQ(Opti sec path load onal) ratio threshold

R99 PS background primary secondary path load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第726页,共3267页

162734118.xls.ms_office1

文档密级:

PSBKGUL

R99 PS R99 PS ADD background background TRMFACTOR( service uplink service uplink Optional) factor factor.

Interval Type

0~100

0~100

Offset of the PSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the PSCH ADD Interval PSCHPower downlink transmit power PSCH(Optional) Type common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced.

-350~150

-35~15, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第727页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS R99 PS conversational ADD conversational Interval PSCONVDL service TRMFACTOR( service downlink Type downlink Optional) factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第728页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS PSCONVPRI conversational TRMMAP(Opti conversational PATH primary path onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

R99 PS R99 PS ADD conversational conversational PSCONVPRI LOADEQ(Opti bearing primary pri path load TH onal) path load threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第729页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS PSCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

R99 PS R99 PS conversational conversational ADD primary PSCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第730页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS R99 PS ADD conversational conversational PSCONVUL TRMFACTOR( service uplink service uplink Optional) factor factor.

Interval Type

0~100

0~100

DL primary scrambling PScrambCode code

ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD NRNCCELL(M andatory)

Sequence No. of a DL primary scrambling code in a cell. For Interval detailed Type information of this parameter, refer to 3GPP TS 25.413.

0~511

0~511

R99 PS high PSHIGHINT interactive pri ERACTPRIT path load H threshold

R99 PS high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第731页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS high priority R99 PS high ADD interactive PSHIGHINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

PS domain PSHOOut2Gl Reloc GSM oadThd load THD

PS domain Relocation GSM load THD. This parameter specifies the PS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldI ADD nd] in SET CELLINTERR INTERRATHON ATHONCOV( COV is set to Optional) ON, the PS Interval SET domain interType INTERRATHO system relocation NCOV(Optional out process will ) be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the PS domain Reloc GSM load THD. Otherwise, the RNC does not stop the PS domain intersystem relocation out process.

0~100

0~100%

8/7/2013

华为机密,未经许可不得扩散

第732页,共3267页

162734118.xls.ms_office1

文档密级:

Background PsInactTmrFo service T1 rBac

When detecting that the Ps' Background User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.

0~14400

0~14400

When detecting that the Ps' Conversational User had no data to transfer for a SET long time which Interval PsInactTmrFo Conversational PSINACTTIME longer than this Type rCon service T1 R(Optional) timer, the PDCP layer would request the RRC layer to release this Radio Access Bear.

0~14400

0~14400

8/7/2013

华为机密,未经许可不得扩散

第733页,共3267页

162734118.xls.ms_office1

文档密级:

When detecting that the Ps' IMS signal had no data to transfer for a long time which SET longer than this Interval PSInactTmrF IMS signal T1 PSINACTTIME timer, the PDCP Type orImsSig R(Optional) layer would request the RRC layer to release this Radio Access Bear.

0~64800

0~64800

Interactive PsInactTmrFo service T1 rInt

When detecting that the Ps' Interactive User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.

0~14400

0~14400

8/7/2013

华为机密,未经许可不得扩散

第734页,共3267页

162734118.xls.ms_office1

文档密级:

Streaming PsInactTmrFo service T1 rStr

When detecting that the Ps' Streaming User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.

0~14400

0~14400

SET PS OPERATORCF PsInfoUpdFla Information GPARA(Option g Update Switch al)

Indicating whether the PS domain permits the CN information to update .

Enumeratio OFF, ON n Type

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第735页,共3267页

162734118.xls.ms_office1

文档密级:

PS Information PsInfoUpdTm Update r Protection Timer

SET Ps Information OPERATORCF Interval Update protection GPARA(Manda Type timer. tory)

60~900

60~900

R99 PS interactive PSINTERDL service downlink factor

ADD R99 PS Interval TRMFACTOR( interactive service Type Optional) downlink factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第736页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS interactive Interval PSINTERUL TRMFACTOR( interactive service service uplink Type Optional) uplink factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第737页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS high ADD R99 PS high PRI AF42, PSINTHGHP PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, RIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第738页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS high ADD R99 PS high PRI AF42, PSINTHGHS PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, ECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第739页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS low ADD R99 PS low PRI AF42, PSINTLOWP PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, RIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第740页,共3267页

162734118.xls.ms_office1

文档密级:

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS low ADD R99 PS low PRI AF42, PSINTLOWS PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, ECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

8/7/2013

华为机密,未经许可不得扩散

第741页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS middle PRI PSINTMIDP interactive RIPATH primary path

ADD R99 PS middle TRMMAP(Opti PRI interactive onal) primary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第742页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS middle middle PRI PSINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

R99 PS low interactive pri PSLOWINTE path load RACTPRITH threshold

R99 PS low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

R99 PS low priority R99 PS low ADD interactive PSLOWINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第743页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS mid interactive pri PSMIDINTE path load RACTPRITH threshold

R99 PS middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.

Interval Type

0~100

0~100

R99 PS mid PSMIDINTE pri sec path RACTSECW load ratio HT threshold

R99 PS middle priority ADD interactive LOADEQ(Opti primary onal) secondary path load ratio threshold.

Interval Type

0~100

0~100

Feature Supporting PsNriCfgMod Mode of PS e Domain

This parameter specifies feature SUPP_NO mode of operators NE, SUPP_NO in the PS domain. SET SUPP_IUF NE,SUPP_I You should OPERATORCF LEX, UFLEX,SU configure the Enumeratio GPARA(Option SUPP_MO PP_MOCN, network resource n Type al) CN, SUPP_IUF identifier (NRI) SUPP_IUF LEX_MOC when MOCN or LEX_MOC N Iu-Flex is N supported.

8/7/2013

华为机密,未经许可不得扩散

第744页,共3267页

162734118.xls.ms_office1

文档密级:

Length of PS PSNRILength NRI in bits

SET OPERATORCF NRI length for GPARA(Manda PS domain. tory)

Interval Type

1~10

1~10

Threshold of PsRabAbnor PS Call Drop mRelRatioTh Ratio d

Threshold of PS call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is SET higher than this Interval KPIALMTHD( threshold and the Type Optional) number of PS call release is higher than the related threshol, the KPI alarm of PS call drop ratio is reported.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第745页,共3267页

162734118.xls.ms_office1

文档密级:

The minimum number of PS RAB establish request per SPU to report KPI alarm. In a checking period,if Minimum the number of PS SET Number of PS RAB establish Interval PsRabEstAtt KPIALMTHD( RAB Establish request is higher Type MinNum Optional) Request than the threshold and the PS RAB setup successful ratio is lower than this threshold,the KPI alarm of PS RAB setup ratio is reported. Threshold of PS RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower Threshold of SET than this PS RAB Setup PsRabEstSuc KPIALMTHD( threshold and the Successful cRatioThd Optional) number of PS Ratio RAB establish request is higher than the related threshold,the KPI alarm of PS RAB setup ratio is reported. The minimum number of PS call release per SPU to report KPI alarm.In a checking period, if the number of Minimum SET PS call release is PsRabRelMin Number of PS KPIALMTHD( higher than the Num Call Release Optional) related threshold and the PS call drop ratio is higher than this threshold, the KPI alarm of PS call drop ratio is reported.

0~65534

0~65534

Interval Type

0~100

0~100

Interval Type

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第746页,共3267页

162734118.xls.ms_office1

文档密级:

SET DSACAUTOA LGO(Mandator Restriction for y) PsRestriction PS ADD CELLDSACM ANUALPARA( Mandatory)

Whether to impose the access FALSE, Enumeratio restriction on the TRUE n Type PS domain.

FALSE,TR UE

Indicating whether the cell allows PS service inter-RAT handover. ON: PS service inter-RAT handover is enabled. OFF: PS service inter-RAT handover is disabled. Service handover refers to the Inter-RAT PS ADD handover attribute PSServiceHO handover CELLHOCOM Enumeratio ON, OFF and related Switch switch M(Optional) n Type parameter configuration on the network side for each service. When a service is established, the related measurements and inter-RAT handover are immediately triggered. These two switches are enabled only for service handover;

ON,OFF

8/7/2013

华为机密,未经许可不得扩散

第747页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS streaming PSSTRMDL service downlink factor

ADD R99 PS Interval TRMFACTOR( streaming service Type Optional) downlink factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第748页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS PSSTRMPRI streaming PATH primary path

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD R99 PS AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

R99 PS streaming pri PSSTRMPRI path load TH threshold

R99 PS ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第749页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS PSSTRMSEC streaming TRMMAP(Opti streaming PATH secondary path onal) secondary path.

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

R99 PS R99 PS ADD streaming primary streaming pri Interval PSSTRMSEC LOADEQ(Opti secondary path sec path load Type WHT onal) load ratio ratio threshold threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第750页,共3267页

162734118.xls.ms_office1

文档密级:

R99 PS ADD R99 PS streaming Interval PSSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第751页,共3267页

162734118.xls.ms_office1
PS rate negotiation switch. 1) PS_BE_EXTRA_ LOW_RATE_AC CESS_SWITCH: When the switch is on, access at a rate of 0 kbit/s or on the FACH is determined according to the current SET connection state CORRMALGO of the RRC if the Bit Field SWITCH(Optio PS BE admission Type nal) and the later preemption and queuing fail. 2) PS_BE_INIT_RA TE_DYNAMIC_ CFG_SWITCH: When the switch is on, the initial rate of the service should be dynamically configured according to the value of Ec/No The total PS throughput of all ACT the operators Interval LICENSE(Opti cannot exceed Type onal) that defined in the license file.

文档密级:

PsSwitch

PS rate negotiation switch

PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH, PS_BE_IU_ QOS_NEG _SWITCH, PS_RAB_D OWNSIZIN G_SWITC H, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH, PS_STREA M_IU_QOS _NEG_SWI TCH, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH

PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH, PS_BE_IU_ QOS_NEG _SWITCH, PS_RAB_D OWNSIZIN G_SWITC H, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH, PS_STREA M_IU_QOS _NEG_SWI TCH, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH

Max Psthroughput throughput of PS

0~3910000

0 to 3910000

PT

Port Type

SET This parameter BOOL(Digi ALMPORT(Ma specifies the type Enumeratio tal Port), BOOL,VAL ndatory) of the port. n Type VALUE(An UE alog Port)

8/7/2013

华为机密,未经许可不得扩散

第752页,共3267页

162734118.xls.ms_office1

文档密级:

PTIP

NodeB Interface IP Address

This parameter ADD specifies the IP NODEBESN(M address for the andatory) NodeB FE port.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第753页,共3267页

162734118.xls.ms_office1

文档密级:

NodeB PTIPMASK Interface IP Mask

This parameter specifies the ADD subnet mask for IP Address NODEBESN(M the IP address of Type andatory) the NodeB FE port.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第754页,共3267页

162734118.xls.ms_office1
This parameter specifies whether MBMS PTM nonstreaming bearers can be preempted by other MBMS PTM bearers or nonMBMS bearers. If this parameter is set to ON, a PTM non-streaming bearer might be SET pre-empted by an RNCMBMSPA Enumeratio ON, OFF MBMS bearer of RA(Optional) n Type a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user. This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers and non-MBMS bearers. If this parameter is set to SET ON, pre-emption RNCMBMSPA is triggered when Enumeratio ON, OFF RA(Optional) PTM streaming n Type bearer admission fails. That is, a lower-priority MBMS bearer or a non-MBMS bearer is released. Thus, the ongoing service is disrupted and call drop even occurs.

文档密级:

Ptm Null Stream PtmNullStrm Passivity PasiSwitch Switch

ON, OFF

Ptm Preempt PtmPreemptS Switch witch

ON, OFF

8/7/2013

华为机密,未经许可不得扩散

第755页,共3267页

162734118.xls.ms_office1
This parameter specifies whether MBMS PTM streaming bearers can be preempted by other MBMS PTM bearers or nonMBMS bearers. If this parameter is set to ON, a PTM streaming bearer might be preSET empted by an RNCMBMSPA Enumeratio ON, OFF MBMS bearer of RA(Optional) n Type a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user.

文档密级:

Ptm Stream PtmStrmPasiS Passivity witch Switch

ON, OFF

PTYPE

Port type

This parameter SET specifies the type ETHPORT(Ma Enumeratio FE, GE of an Ethernet ndatory) n Type port.

FE, GE

PUC PucAvgFilter smoothing Len filter length

SET LDM(Optional) SET SATLDM(Opti onal)

Length of smoothing filter window of potential user control (PUC).

Interval Type

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第756页,共3267页

162734118.xls.ms_office1

文档密级:

PucPeriodTi merLen

PUC period timer length

Identifying the potential user control period. When the cell load is high, the SET cell selection and LDCPERIOD( reselection can be Optional) periodically Interval SET modified in order Type SATLDCPERI to enable users in OD(Optional) unconnected mode to select other cells more easily, thus reducing the local cell load.

6~86400

6~86400

PunishTime

Punish Time

This parameter specifies the coefficient of the penalty time after the PTP RB admission fails. The penalty time SET is MCCH Interval RNCMBMSPA modification Type RA(Optional) period multiplied by this parameter. During the penalty time, users in the cell are not allowed to initiate PTP RB requests.

0~60

0~60

8/7/2013

华为机密,未经许可不得扩散

第757页,共3267页

162734118.xls.ms_office1

文档密级:

PwrCtrlAlg

This parameter is used to inform the UE of the method for translating the received Transmit Power Control Power control (TPC) commands. ALGORIT ALGORIT SET algorithm In other words, it Enumeratio HM1, HM1, FRC(Optional) selection is used to select n Type ALGORIT ALGORIT UL power control HM2 HM2 algorithm. For details of this parameter, refer to the 3GPP TS 25.214.

This parameter specifies the minimum DSCP value of queue 0. SET The IP packet Min DSCP of Interval QUEUEMAP(O with the DSCP Q0MINDSCP queue 0 Type ptional) value within the range (63, minimum DSCP value of queue 0] enters queue 0.

0~63

0 to 63

8/7/2013

华为机密,未经许可不得扩散

第758页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the minimum DSCP value of queue 1. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q1MINDSCP queue 1 Type ptional) range (minimum DSCP value of queue 0, minimum DSCP value of queue 1] enters queue 1.

0~63

0 to 63

This parameter specifies the minimum DSCP value of queue 2. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q2MINDSCP queue 2 Type ptional) range (minimum DSCP value of queue 1, minimum DSCP value of queue 2] enters queue 2.

0~63

0 to 63

8/7/2013

华为机密,未经许可不得扩散

第759页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the minimum DSCP value of queue 3. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q3MINDSCP queue 3 Type ptional) range (minimum DSCP value of queue 2, minimum DSCP value of queue 3] enters queue 3.

0~63

0 to 63

This parameter specifies the minimum DSCP value of queue 4. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q4MINDSCP queue 4 Type ptional) range (minimum DSCP value of queue 3, minimum DSCP value of queue 4] enters queue 4.

0~63

0 to 63

8/7/2013

华为机密,未经许可不得扩散

第760页,共3267页

162734118.xls.ms_office1

文档密级:

Qaal2 QAAL2VER Protocol Version

Function set supported by the local RNC for the adjacent node The value CS1 (or CS2) indicates that the local end connects to the adjacent node through the CS1 (or CS2) version protocol. The CS2 ADD version protocol ADJNODE(Opt is backward Enumeratio CS1, CS2 ional) compatible with n Type the CS1 version protocol. Therefore, it is recommended to use the default value CS2 except that the adjacent node is not compatible with CS2 messages from the local end.

CS1, CS2

8/7/2013

华为机密,未经许可不得扩散

第761页,共3267页

162734118.xls.ms_office1

文档密级:

Qhcs

Quality threshold for HCS reselection

ADD CELLHCS(Opti onal) ADD GSMCELL(Opt ional) ADD NRNCCELL(O ptional)

Quality threshold of HCS cell reselection. It can be used to calculate the Interval quality level of Type the specified cell in HCS reselection H rules.

0~99

0~99

This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection Hysteresis measurement. ADD 1for UE in This parameter is Interval Qhyst1sfach CELLSELRES CELL_FACH Type not configured EL(Optional) state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.

0~40,255

{0~40},{25 5}

8/7/2013

华为机密,未经许可不得扩散

第762页,共3267页

162734118.xls.ms_office1
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and Hysteresis 1 reselection for UE in ADD measurement. Qhyst1spch CELL_PCH or CELLSELRES This parameter is URA_PCH EL(Optional) not configured state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304. This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection Hysteresis 2 measurement. ADD for UE in This parameter is Qhyst2sfach CELLSELRES CELL_FACH not configured EL(Optional) state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.

文档密级:

Interval Type

0~40,255

{0~40},{25 5}

Interval Type

0~40,255

{0~40},{25 5}

8/7/2013

华为机密,未经许可不得扩散

第763页,共3267页

162734118.xls.ms_office1
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and Hysteresis 2 reselection for UE in ADD measurement. Interval CELL_PCH or CELLSELRES This parameter is Type URA_PCH EL(Optional) not configured state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.

文档密级:

Qhyst2spch

0~40,255

{0~40},{25 5}

8/7/2013

华为机密,未经许可不得扩散

第764页,共3267页

162734118.xls.ms_office1
Offset between the neighboring GSM cell and WCDMA cell. This specifies the offset of the measurement value of the neighboring GSM cell signal quality. This parameter is used for RSSI measurement. The offset is ADD subtracted from Interval GSMNCELL(O the neighboring Type ptional) cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. Content: During cell selection or resection, the larger the value of the parameter, the smaller the probability of

文档密级:

Qoffset1sn

Qoffset1sn

-50~50

-50~50

8/7/2013

华为机密,未经许可不得扩散

第765页,共3267页

162734118.xls.ms_office1
The minimum required quality threshold corresponding to CPICH Ec/No. The UE can camp on the cell only when the measured CPICH Ec/No is greater than the value of this parameter. The higher the ADD parameter value CELLSELRES is, the more EL(Optional) difficult it is for ADD the UE to reside NRNCCELL(M in the cell. The andatory) lower parameter value is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer This parameter indicates whether to configure the minimum quality level. When it is set to FALSE, the UE adopts the corresponding value of the current serving ADD cell, added NRNCCELL(O through the ADD ptional) CELLSELRESEL command. This parameter is generally set to FALSE. When it is set to TRUE, the UE adopts the value in ADD NRNCCELL command.

文档密级:

Qqualmin

Min quality level

Interval Type

-24~0

-24~0

QqualminInd

Min quality level ind

TRUE(Conf igure the minimum quality threshold), Enumeratio TRUE,FAL FALSE(Not n Type SE configure the minimum quality threshold)

8/7/2013

华为机密,未经许可不得扩散

第766页,共3267页

162734118.xls.ms_office1
The minimum required RX threshold corresponding to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is greater than the value of this parameter. The setting of ADD Qrxlevmin should CELLSELRES be related to EL(Optional) Qqualmin. The Interval ADD higher the Type NRNCCELL(M parameter is, the andatory) more difficult it is for the UE to reside in the cell. The lower parameter is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the

文档密级:

Qrxlevmin

Min Rx level

-58~-13

-115~-25, step:2

8/7/2013

华为机密,未经许可不得扩散

第767页,共3267页

162734118.xls.ms_office1

文档密级:

Qrxlevmin

Minimum RX level of the GSM cell. Before the UE camps on the cell, take the measurement of the signal quality in the cell. If the quality is better ADD than this Interval Min RX level GSMNCELL(O parameter, this Type ptional) indicates that the cell can obtain better QoS and the UE is allowed to camp on this cell. Otherwise, the UE cannot obtain good QoS in this cell and does not camp on the cell.

-58~-13

-115~25,Step:2

Indicating whether the actual value of Qrxlevmin should be added with the value of DeltaQrxlevmin or not. If ADD QrxlevminExtSup CELLSELRES is set to TRUE, Min Rx level EL(Optional) TRUE, then Qrxlevmin = QrxlevminExt Enumeratio Extend Support ADD FALSE Qrxlevmin + Sup n Type NRNCCELL(O DeltaQrxlevmin; ptional) Otherwise, the value of Qrxlevmin does not change. For detailed information of this parameter, refer to 3GPP TS 25.331 10.3.2.3.

TRUE,FAL SE

8/7/2013

华为机密,未经许可不得扩散

第768页,共3267页

162734118.xls.ms_office1
This parameter indicates whether to configure the minimum RX level. When it is set to FALSE, the UE adopts the ADD corresponding Min RX level NRNCCELL(O value of the QrxlevminInd ind ptional) current serving cell, added through the ADD CELLSELRESEL command. This parameter is generally set to FALSE. Measurement quantity of cell selection and reselection. It can Cell Selbe set to CPICH ADD reselection Ec/N0 or CPICH QualMeas CELLSELRES quality RSCP. For EL(Optional) measure detailed information of this parameter, refer to 3GPP TS 25.304.

文档密级:

TRUE(Conf igure the minimum signal level for access), Enumeratio TRUE,FAL FALSE(Not n Type SE configure the minimum signal level for access)

CPICH_EC NO(CPICH Enumeratio Ec/N0), n Type CPICH_RS CP(CPICH RSCP)

CPICH_EC NO, CPICH_RS CP

Queue QueueAlgoS algorithm witch switch

Indicating whether queue is supported. When a user initiates a call, if cell resources are SET insufficient and QUEUEPREE Enumeratio OFF, ON the user is queue MPT(Optional) n Type supportive, the RNC tries to arrange this user to join the queue to increase access success ratio.

OFF, ON

8/7/2013

华为机密,未经许可不得扩散

第769页,共3267页

162734118.xls.ms_office1
Queue length. The total number of users in queue of each cell should not exceed the value specified in this parameter. When a new user needs queuing, 1) If the queue has vacancy, the user joins the queue immediately. 2) If the queue is full SET and there is a user Interval Queue length QUEUEPREE whose queue time Type MPT(Optional) exceeds the allowed maximum queue time, this user is out of the queue and access fails. At the same time, the new user joins the queue. 3) If the queue has a user whose priority is lower than that of the new user, the user in the queue with ADD TYPRABOLPC (Mandatory) ADD TYPRABDCC CMC(Mandator y) This parameter ADD TYPRABRLC( specifies the Service index number that Interval Mandatory) parameter identifies the Type ADD index TYPRABHSPA configuration of a typical RAB. (Mandatory) ADD TYPRABBASI C(Mandatory) ADD TYPRABQUA LITYMEAS(M andatory)

文档密级:

QueueLen

5~20

5~20

RabIndex

0~99

0~99

8/7/2013

华为机密,未经许可不得扩散

第770页,共3267页

162734118.xls.ms_office1

文档密级:

Rab Modify RabModifyTi Timer Length merLen

The timer is started when the RNC initiates the RAB Modify procedure. If RAB modify message is received from the SET CN when this Interval COIFTIMER(O timer is actived, Type ptional) the rate information assigned by CN when establishing traffic will be reserved as the new assigned rate is used. ADD RAC(Mandator y) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD GSMCELL(Ma ndatory) ADD NRNCCELL(M andatory)

1~65535

1~65535

RAC

Routing area code

Identifying a routing area in a location area for a PLMN of GSMMAP type. It is defined by the Interval operator. For Type detailed information of this parameter, refer to 3GPP TS 23.003.

0~255

0~255

8/7/2013

华为机密,未经许可不得扩散

第771页,共3267页

162734118.xls.ms_office1

文档密级:

RACH sub RACHSubCh channel no. No

Sequence No. of an available sub channel. A maximum of 12 sub channels ADD (from sub channel Bit Field PRACHBASIC( 0 to 11) can be Type Mandatory) selected. For detailed information of this parameter, refer to 3GPP TS 25.214.

SUBCHAN EL0, SUBCHAN EL1, SUBCHAN EL2, SUBCHAN EL3, SUBCHAN EL4, SUBCHAN EL5, SUBCHAN EL6, SUBCHAN EL7, SUBCHAN EL8, SUBCHAN EL9, SUBCHAN EL10, SUBCHAN EL11

SUBCHAN EL0, SUBCHAN EL1, SUBCHAN EL2, SUBCHAN EL3, SUBCHAN EL4, SUBCHAN EL5, SUBCHAN EL6, SUBCHAN EL7, SUBCHAN EL8, SUBCHAN EL9, SUBCHAN EL10, SUBCHAN EL11. (Multiple options.)

8/7/2013

华为机密,未经许可不得扩散

第772页,共3267页

162734118.xls.ms_office1

文档密级:

RafcTmr

Trafc

A timer used to SET wait for the reset Interval IUTIMERAND response from Type NUM(Optional) CN.

10000~240 10000~240 000 000

When RAN SET Sharing RAN Sharing OPERATORSH RANSharing Supported,RNC Support ARINGMODE( Support can configure Optional) multi-plmn.

Enumeratio NO, YES n Type

NO,YES

8/7/2013

华为机密,未经许可不得扩散

第773页,共3267页

162734118.xls.ms_office1

文档密级:

Identifying the type of the interRAT cell NO_CAPABILIT Y indicates that the capacity of the GSM cell NO_CAPA remains BILITY(Cel ADD Inter-RAT cell unknown. It is not l capability RatCellType GSMCELL(Ma Enumeratio type recommended to unknown), ndatory) n Type set the cell type to GSM~1 NO_CAPABILIT GPRS~2 Y. If the cell type EDGE is NO_CAPABILIT Y, the inter-RAT handover cannot be triggered.

NO_CAPA BILITY,GS M,GPRS,E DGE

RatcTmr

Tratc

SET A timer used to IUTIMERAND respond to CN NUM(Optional) reset.

Interval Type

0~240000

0~240000

8/7/2013

华为机密,未经许可不得扩散

第774页,共3267页

162734118.xls.ms_office1
The rate matching factor of a transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti downlink load. onal) This parameter defines the downlink data rate recover timer length in fast TF restriction. RateRstrctTimerL en and RateRecoverTime rLen are effective only to the downlink. The uplink fast TF restriction is performed by the

文档密级:

ADD FACH(Optional ) Rate matching ADD RateMatching attribute RACH(Optional Attr ) ADD PCH(Optional)

Interval Type

1~256

1~256

DL TF rate RateRecover recover timer TimerLen length

Interval Type

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第775页,共3267页

162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti downlink load. Type onal) This parameter defines the downlink data rate restrict coefficient in fast TF restrict The smaller this parameter is, the larger the TF restrict effect. The lower the parameter is, the more severe the rate is restricted. An excessive low

文档密级:

DL TF rate RateRstrctCo restrict ef coefficient

1~99

0.01~0.99, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第776页,共3267页

162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti 1~65535 downlink load. Type onal) This parameter defines the time length of the downlink OLC fast TF restriction. RateRstrctTimerL en and RateRecoverTime rLen are effective only to the downlink. The uplink fast TF restriction is performed by the This parameter specifies the BEG name of the FORWARD(M rollback point. andatory) The target String Type BEG rollback point ROLLBACK(M must exist and andatory) must be subsequent to the current point.

文档密级:

DL TF rate RateRstrctTi restrict timer merLen length

1~65535

RBPNAME

name of rollback point

0 to 250 characters

8/7/2013

华为机密,未经许可不得扩散

第777页,共3267页

162734118.xls.ms_office1
This parameter specifies the type of rollback point. LASTRBP LASTRBP(l indicates the last ast rollback point, rollbackpoin BEG which can be set t), LASTRBP, FORWARD(M by the user or the Enumeratio APPOINTR APPOINTR andatory) calculated point n Type BP(appointe BP by the RNC. d APPOINTRBP rollbackpoin indicates the t) rollback point specified by the user.

文档密级:

RBPTYPE

type of rollback point

A timer used to wait for the RB Wait RB SET reconfiguration Interval RbRecfgRspT reconfiguration STATETIMER( response from UE Type mr response timer Optional) in the RB procedure.

300~10000 300~10000

8/7/2013

华为机密,未经许可不得扩散

第778页,共3267页

162734118.xls.ms_office1

文档密级:

A timer to RNC Wait RB SET wait for the RB RbRelRspTm release STATETIMER( release response r response timer Optional) from UE in the RB procedure.

Interval Type

300~10000 300~10000

8/7/2013

华为机密,未经许可不得扩散

第779页,共3267页

162734118.xls.ms_office1

文档密级:

A timer to RNC SET wait for the RB Wait RB setup RbSetupRspT STATETIMER( setup response response timer mr Optional) from UE in the RB procedure.

Interval Type

300~10000 300~10000

RDC

Rate down coefficient

This parameter ADD specifies the rate Interval IPLOGICPORT down coefficient Type (Optional) of the logical port.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第780页,共3267页

162734118.xls.ms_office1

文档密级:

Recounting RecountingPe Period riod

This parameter SET specifies the RNCMBMSPA interval between RA(Optional) recounting operations.

Interval Type

1~360

10~3600, step: 10

DL TF rate RecoverCoef recover coefficient

DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the ADD MAC layer and Interval CELLOLC(Opti the rate of user Type onal) data, thus reducing the cell downlink load. This parameter defines the downlink OLC fast TF rate recovery coefficient. The greater this parameter is, the larger the TF restrict effect.

100~200

1~2, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第781页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter Decrease rate ADD specifies the RECOVERT alarm recover IPLOGICPORT decrease rate HD threshold (Optional) alarm recover threshold.

Interval Type

20~99

20~99

RED

Backup

This parameter ADD specifies whether BRD(Mandator Enumeratio YES, NO to back up the y) n Type board.

YES, NO

8/7/2013

华为机密,未经许可不得扩散

第782页,共3267页

162734118.xls.ms_office1

文档密级:

ReDirection ReDirBandIn target band d indicator

SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)

This parameter specifies the target frequency band in the redirection procedure.

Band1, Band2, Band3, Band4, Band5, Band6, Enumeratio Band7, n Type Band8, Band9, DependOn NCell, BandIndNot Used

Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOn NCell, BandIndNot Used

8/7/2013

华为机密,未经许可不得扩散

第783页,共3267页

162734118.xls.ms_office1

文档密级:

When the UL load state or DL load state of the serving cell is LDR or OLC, a UE may be redirected to another cell according to the traffic type. This parameter SET specifies the REDIRECTIO possibility of N(Optional) Redirection redirecting the Interval RedirFactorO ADD Factor Of LDR UE to another Type fLDR CELLREDIRE cell. When this CTION(Optiona parameter is set to l) 0, the RRC redirection is not performed if the load state on the serving cell is LDR or OLC. LDR indicates basic congestion. OLC indicates overload congestion.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第784页,共3267页

162734118.xls.ms_office1

文档密级:

Redirection RedirFactorO Factor Of fNorm Normal

When the load of the serving cell is within the normal range, a UE may be redirected to another cell according to the traffic type. This SET parameter REDIRECTIO specifies the N(Optional) possibility of Interval ADD redirecting the Type CELLREDIRE UE to another CTION(Optiona cell. When this l) parameter is set to 0, the RRC redirection is not performed if the load of the serving cell is within the normal range.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第785页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the RRC redirection algorithm is valid for the specified service. The algorithm is valid only when the RRC redirection switch is enabled and when this parameter is set to OFF, SET ONLY_TO_INT ONLY_TO REDIRECTIO ER_FREQUENC _INTER_F N(Optional) Y or REQUENC ADD Enumeratio ONLY_TO_INT Y, CELLREDIRE n Type ER_RAT. Value ONLY_TO CTION(Optiona OFF indicates _INTER_R l) that RRC AT redirection is not allowed. Value ONLY_TO_INT ER_FREQUENC Y indicates that only the RRC redirection to an inter-frequency neighboring cell is allowed. Value ONLY_TO_INT ER_RAT

文档密级:

RedirSwitch

Redirection Switch

OFF,ONLY _TO_INTE R_FREQU ENCY,ONL Y_TO_INT ER_RAT

8/7/2013

华为机密,未经许可不得扩散

第786页,共3267页

162734118.xls.ms_office1

文档密级:

Redirection target ReDirUARF downlink CNDownlink UARFCN

SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)

This parameter specifies the target downlink UARFCN of a cell for RRC redirection.

Interval Type

0~16383

0~16383

8/7/2013

华为机密,未经许可不得扩散

第787页,共3267页

162734118.xls.ms_office1
This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Depending on the band indication, the value range as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Interval Band2: Type Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [9371288] Special frequencies: none

文档密级:

Redirection ReDirUARF target uplink CNUplink UARFCN

SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)

0~16383

0~16383

8/7/2013

华为机密,未经许可不得扩散

第788页,共3267页

162734118.xls.ms_office1

文档密级:

Redirection target UL ReDirUARF frequency CNUplinkInd configuration ind

SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)

This parameter specifies whether the UL frequency of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured. TRUE, Enumeratio - FALSE: The UL FALSE n Type frequency does not need to be configured. It is configured automatically according to the relationship between UL and DL frequencies.

TRUE, FALSE

8/7/2013

华为机密,未经许可不得扩散

第789页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the link Clock source SET Interval REF2MCLKS No. of the clock of output clock CLK(Optional) Type RC source of the output clock.

0~31

0 to 31

8/7/2013

华为机密,未经许可不得扩散

第790页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the Backup clock SET backup link No. REF2MCLKS source of CLK(Optional) of the clock RCBAK output clock source of the output clock.

Interval Type

0~31

0 to 31

This parameter Output switch specified the SET REF2MCLKS of 2M output output switch of 2 CLK(Optional) W1 clock 1 MHz output clock 1. This parameter Output switch specified the SET REF2MCLKS of 2M output output switch of 2 CLK(Optional) W2 clock 2 MHz output clock 2.

Enumeratio OFF, ON n Type

OFF, ON

Enumeratio OFF, ON n Type

OFF, ON

Indicates whether register beared by fach under call SET shock control. Register Bear RegByFachS CALLSHOCKC This function Enumeratio OFF, ON by Fach Switch witch TRL(Optional) only applies n Type under NodeB level or cell level call shock control.

OFF,ON

8/7/2013

华为机密,未经许可不得扩散

第791页,共3267页

162734118.xls.ms_office1
This parameter specifies re-host policy type for NodeB. The value "REHOSTRIGH TNOW" indicates to perform re-host policy for the NodeB immediately REHOSTRI when the RNC GHNOW(R recovers from ehostRighN RehostRigh disaster. The SET ow), Now, value Re-host Policy POOLPRIMHO "REHOSTDELA Enumeratio REHOSTD RehostDela ReHostPolicy Type STPOLICY(Opt n Type ELAY(Reh y, Y" indicates to ional) ostDelay), RehostWhe perform re-host REHOSTW n policy for the HEN(Rehos NodeB after a tWhen) specified delayed period when the RNC recovers from disaster. The value "REHOSTWHEN " indicates to perform re-host policy for the NodeB at a This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt service user an ional) indication for releasing an AAL2 connection.

文档密级:

Release RELINDTM indication R timer

Interval Type

2000~6000 2000~6000 0 0

A timer to RNC Relocation SET wait for another Interval RelocAnother another request STATETIMER( relocation request Type Tmr timer Optional) in relocation procedure. A timer to RNC wait for the SET relocation STATETIMER( command Optional) message in relocation procedure.

1~10000

1~10000

Relocation RelocCmdTm Command r timer

Interval Type

1~20000

1~20000

8/7/2013

华为机密,未经许可不得扩散

第792页,共3267页

162734118.xls.ms_office1

文档密级:

Relocation RelocCommit commit timer Tmr

A timer to RNC wait for rnsap SET relocation commit Interval STATETIMER( message in Type Optional) relocation procedure.

1~20000

1~20000

Relocation data RelocDataFw forwarding dTmr timer

A timer used for SET data forwarding Interval STATETIMER( in relocation Type Optional) procedure.

1~20000

1~20000

Relocation failed Iu RelocFailIuR release elCmdTmr command timer

A timer to RNC SET wait for Iu release Interval STATETIMER( command in the Type Optional) failed relocation procedure.

1~10000

1~10000

A timer to RNC Relocation Iu wait for the Iu SET release release command Interval RelocIuRelC STATETIMER( command message in Type mdTmr Optional) timer relocation procedure. A timer to RNC wait for mobile SET information STATETIMER( confirmation in Optional) relocation procedure.

1~60000

1~60000

Relocation mobile info RelocMobilC confirmation onfTmr timer

Interval Type

1~10000

1~10000

A timer to RNC wait for the Relocation SET response to PhyCh Interval RelocPhychR STATETIMER( physical channel reconfiguration Type ecfgTmr Optional) reconfiguration in timer relocation procedure. Relocation SET Inter-RAT HO RelocUtranH STATETIMER( completion oCmpTmr Optional) timer A timer to RNC wait for interRAT handover completion in relocation procedure.

1~10000

1~10000

Interval Type

1~20000

1~20000

8/7/2013

华为机密,未经许可不得扩散

第793页,共3267页

162734118.xls.ms_office1

文档密级:

Release RELREQTM request timer R

This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for releasing an AAL2 connection.

Interval Type

2000~6000 2000~6000 0 0

RelThdForD wnGrd

Relative threshold of SHO failure

This parameter specifies the threshold of immediate rate reduction after the soft handover failure. The rate reduction of the active set and the SHO retry procedure can be triggered without the intrafrequency reporting event SET reported, when Interval INTRAFREQH the quality of the Type O(Optional) cell in the active set fulfills the following conditions. The formula of direct SHO rate reduction is new > Mbest_cell RelThdForDwnG rd where Mnew: the CPICH Ec/No measurement

-29~29

14.5~14.5,S tep:0.5

8/7/2013

华为机密,未经许可不得扩散

第794页,共3267页

162734118.xls.ms_office1

文档密级:

REMARK

Route use description

ADD IPRT(Optional) ADD ATMTRF(Opti onal)

This parameter specifies the function of the route.

String Type -

1 to 250 characters

REMARK

Use description

ADD LOADEQ(Man datory) ADD TRMMAP(Opti Use description. onal) ADD TRMFACTOR( Mandatory)

String Type -

1~31 characters

RepeatNum

Repeat Number

SET Repeat Number RNCCBPARA( of send WriteOptional) Replace.

Interval Type

0~65535

0~65535

SET Repeat Period of Interval RepeatPeriod Repeat Period RNCCBPARA( send WriteType Optional) Replace.

1~4096

1~4096

8/7/2013

华为机密,未经许可不得扩散

第795页,共3267页

162734118.xls.ms_office1
This parameter specifies the reporting period of event 1A. That is, event 1A is reported at each reporting interval. Usually, event 1A is reported only once. Nevertheless, if the cell, where NON_PERI event 1A is ADD ODIC_REP reported, does not CELLINTRAF ORT, join the active set REQHO(Option D250~1 in a specified al) Enumeratio D500~2 period of time, SET n Type D1000~3 the UE can INTRAFREQH D2000~4 change the O(Optional) D4000~5 reporting of event D8000~6 1A into periodical D16000 mode.to avoid missing of measurement reports. The event 1A of this cell is reported for [PeriodMRReport Numfor1A] times with the reporting interval as the set value.

文档密级:

1A event to ReportInterva periodical rpt lfor1A period

NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第796页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1C for periodical reporting. That is, event 1C is reported at each reporting interval. Usually, event 1C is reported only NON_PERI once. ADD ODIC_REP Nevertheless, if CELLINTRAF ORT, the cell, where REQHO(Option D250~1 event 1C is al) Enumeratio D500~2 reported, does not SET n Type D1000~3 join the active set INTRAFREQH D2000~4 in a specified O(Optional) D4000~5 period of time, D8000~6 the UE can D16000 change the reporting of event 1C into periodical mode.to avoid missing of measurement reports. The event 1C of this cell is reported for [PeriodMRReport Numfor1C] times

文档密级:

1C event to ReportInterva periodical rpt lfor1C period

NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第797页,共3267页

162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1J for periodical reporting. That is, event 1J is reported at each reporting interval. Usually, event 1J is reported only NON_PERI once. ADD ODIC_REP Nevertheless, if CELLINTRAF ORT, the cell, where REQHO(Option D250~1 event 1J is al) Enumeratio D500~2 reported, does not SET n Type D1000~3 join the EDCH INTRAFREQH D2000~4 active set in a O(Optional) D4000~5 specified period D8000~6 of time, the UE D16000 can change the reporting of event 1J into periodical mode.to avoid missing of measurement reports. The event 1J of this cell is reported for [PeriodMRReport Numfor1J] times

文档密级:

1J event to ReportInterva periodical rpt lfor1J period

NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第798页,共3267页

162734118.xls.ms_office1

文档密级:

Req2GCap

Required 2G Capability

This parameter specifies the 2G cell capability required by interRAT handovers from 3G networks to 2G networks. If the 2G cell capability does not meet the requirement, the handover is not ADD performed. In GSM, TYPRABBASI terms of the Enumeratio GPRS, C(Mandatory) ability to support n Type EDGE PS services, EDGE cells rank first, GPRS cells second, and GSM cells third. When the PS service is handed over to a 2G network, the service is set up at the closest rate that the 2G network supports.

GSM, GPRS, EDGE

8/7/2013

华为机密,未经许可不得扩散

第799页,共3267页

162734118.xls.ms_office1

文档密级:

SET CORRM Algo CORRMALGO ReservedSwit reserved switch SWITCH(Optio ch0 0 nal)

CORRM Algo reserved switch 0. The switch is Bit Field reserved for Type further change request use.

RESERVE D_SWITC H_0_BIT1, RESERVE D_SWITC H_0_BIT2, RESERVE D_SWITC H_0_BIT3, RESERVE D_SWITC H_0_BIT4, RESERVE D_SWITC H_0_BIT5, RESERVE D_SWITC H_0_BIT6, RESERVE D_SWITC H_0_BIT7, RESERVE D_SWITC H_0_BIT8, RESERVE D_SWITC H_0_BIT9, RESERVE D_SWITC H_0_BIT10 ,

RESERVE D_SWITC H_0_BIT1, RESERVE D_SWITC H_0_BIT2, RESERVE D_SWITC H_0_BIT3, RESERVE D_SWITC H_0_BIT4, RESERVE D_SWITC H_0_BIT5, RESERVE D_SWITC H_0_BIT6, RESERVE D_SWITC H_0_BIT7, RESERVE D_SWITC H_0_BIT8, RESERVE D_SWITC H_0_BIT9, RESERVE D_SWITC H_0_BIT10 ,

8/7/2013

华为机密,未经许可不得扩散

第800页,共3267页

162734118.xls.ms_office1

文档密级:

SET CORRM Algo CORRMALGO ReservedSwit reserved switch SWITCH(Optio ch1 1 nal)

CORRM Algo reserved switch 1. The switch is Bit Field reserved for Type further change request use.

RESERVE D_SWITC H_1_BIT1, RESERVE D_SWITC H_1_BIT2, RESERVE D_SWITC H_1_BIT3, RESERVE D_SWITC H_1_BIT4, RESERVE D_SWITC H_1_BIT5, RESERVE D_SWITC H_1_BIT6, RESERVE D_SWITC H_1_BIT7, RESERVE D_SWITC H_1_BIT8, RESERVE D_SWITC H_1_BIT9, RESERVE D_SWITC H_1_BIT10 ,

RESERVE D_SWITC H_1_BIT1, RESERVE D_SWITC H_1_BIT2, RESERVE D_SWITC H_1_BIT3, RESERVE D_SWITC H_1_BIT4, RESERVE D_SWITC H_1_BIT5, RESERVE D_SWITC H_1_BIT6, RESERVE D_SWITC H_1_BIT7, RESERVE D_SWITC H_1_BIT8, RESERVE D_SWITC H_1_BIT9, RESERVE D_SWITC H_1_BIT10 ,

SET CORRM Algo CORRMALGO ReservedU32 reserved U32 SWITCH(Optio Para0 Para 0 nal)

CORRM Algo reserved U32 para 0. The para of 32 Interval bits is reserved Type for further change request use. CORRM Algo reserved U32 para 1. The para of 32 Interval bits is reserved Type for further change request use. CORRM Algo reserved U8 para 0. The para of 8 Interval bits is reserved Type for further change request use.

0~4294967 0~4294967 295 295

SET CORRM Algo CORRMALGO ReservedU32 reserved U32 SWITCH(Optio Para1 Para 1 nal)

0~4294967 0~4294967 295 295

SET CORRM Algo CORRMALGO ReservedU8P reserved U8 SWITCH(Optio ara0 Para 0 nal)

0~255

0~255

8/7/2013

华为机密,未经许可不得扩散

第801页,共3267页

162734118.xls.ms_office1

文档密级:

SET CORRM Algo CORRMALGO ReservedU8P reserved U8 SWITCH(Optio ara1 Para 1 nal)

CORRM Algo reserved U8 para 1. The para of 8 Interval bits is reserved Type for further change request use.

0~255

0~255

This timer is started when an AAL2 signaling SET Reset request entity sends the RESREQTM AAL2TMR(Opt timer peer node a R ional) request for resetting an AAL2 path.

Interval Type

2000~6000 2000~6000 0 0

RESTARTT MR

ADD PPPLNK(Optio son-protocol nal) confer out time ADD MPLNK(Option al)

This parameter specifies the time Interval length to restart Type the timer for the PPP link.

2~5

2 to 5

Restriction RestrictionTy Type pe

ADD CELLDSACM ANUALPARA( Mandatory)

Specifies the mode of restricting the access classes.

RestrictionF RestrictionF Enumeratio ixed, ixed,Restric n Type RestrictionF tionFlexible lexible

8/7/2013

华为机密,未经许可不得扩散

第802页,共3267页

162734118.xls.ms_office1

文档密级:

re-TX ReTransRatio measure filter FilterCoef coef

This parameter specifies the filter ADD coefficient for Interval TYPRABRLC( retransmission Type Optional) ratio measurement.

0~10

0~10

BIT MAP of retry HSPA RetryCapabili PLUS ty character

Each bit indicates whether to retry the corresponding HSPA technology. If a bit is set the 1, then the RNC retries the SET Bit Field corresponding FRC(Optional) Type HSPA technology if the UE is not using the corresponding HSPA technology. Otherwise, no retry is performed.

SRB_OVE R_HSDPA, SRB_OVE R_HSUPA, TTI_2MS, MIMO, None 64QAM, L2_ENHA NCE, DTX_DRX, HSSCCH_L ESS_OPER ATION

8/7/2013

华为机密,未经许可不得扩散

第803页,共3267页

162734118.xls.ms_office1
This parameter specifies the work mode of RLC entity. - AM: Acknowledged Mode. Automatic Repeat Request (ARQ) is used in error correction. - UM: Unacknowledged Mode. Retransmission is not applied. According to the configuration, the data with errors is discarded or marked. - TM: Transparent Mode. No protocol overhead is added to the higher-layer data. The protocol data units with errors may be discarded or marked. For details of this parameter, refer This parameter defines each transport block size corresponding in transport format. For a common channel, the RLC size reflects the actual transport block size. For detailed information of this parameter, refer to 3GPP TS 25.322.

文档密级:

RlcMode

RLC mode selection

ADD TYPRABRLC( Mandatory)

AM, UM, Enumeratio TM n Type

AM, UM, TM

RLCSize

RLC size

ADD FACHDYNTFS (Mandatory) ADD PCHDYNTFS( Mandatory) ADD RACHDYNTF S(Mandatory)

Interval Type

0~4992

0~4992

8/7/2013

华为机密,未经许可不得扩散

第804页,共3267页

162734118.xls.ms_office1
This parameter should fulfill the coverage requirement of the network planning, and the value is relative to [PCPICH transmit power]. If the parameter is excessively high, ADD Interval downlink CELLRLPWR( interference may Type Mandatory) occur. If the parameter is excessively low, the downlink power control may be affected. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

RlMaxDlPwr

RL Max DL TX power

-350~150

-35~15, step:0.1

8/7/2013

华为机密,未经许可不得扩散

第805页,共3267页

162734118.xls.ms_office1
This parameter should consider the maximum downlink transmit power and the dynamic range of power control, and the value is relative to [PCPICH transmit power]. Since the dynamic range of power control is set to 15 dB, this ADD RL Min DL parameter is RlMinDlPwr CELLRLPWR( TX power recommended as Mandatory) [RL Max DL TX power] - 15 dB. If the parameter value is excessively low, the transmit power may become excessively low because of incorrect estimation of SIR. If the parameter value is excessively high, A timer to RNC wait for the response to radio RL SET link RlRecfgRead reconfiguration STATETIMER( reconfiguration yTmr timer Optional) prepare in the radio link procedure. A timer to RNC wait for the SET response to radio RL release STATETIMER( link deletion RlRelRspTmr timer Optional) request in the radio link procedure.

文档密级:

Interval Type

-350~150

-35~15, step:0.1

Interval Type

1~10000

1~10000

Interval Type

1~10000

1~10000

RlRstrTmr

A timer to RNC wait for radio link SET RL restoration restoration Interval STATETIMER( timer indication in the Type Optional) radio link procedure.

1~10000

1~10000

8/7/2013

华为机密,未经许可不得扩散

第806页,共3267页

162734118.xls.ms_office1

文档密级:

A timer to RNC wait for the SET RL setup response to radio Interval RlSetupRspT STATETIMER( response timer link setup request Type mr Optional) in the radio link procedure. ADD CELLINTRAF REQHO(Manda tory) ADD INTRAFREQN CELL(Mandato ry) ADD INTERFREQN CELL(Mandato ry) ADD GSMNCELL(M Uniquely andatory) identifying an ADD RNC. SMLCCELL(M andatory) RST IUR(Mandatory ) ADD RNCBASIC(M andatory) ADD GPS(Mandatory ) RST RNC(Mandator y)

1~10000

1~10000

RNCId

RNC ID

Interval Type

0~4095

0~4095

ADD CBS RNC IP IP address of the IP Address RNCIPADD CBSADDR(Ma address RNC. Type R ndatory)

0.0.0.0~255 .255.255.25 5

ADD RNCPOOL(Ma ndatory) Interval RncPool Index ADD RNC pool index. RncPoolIndex Type RNCPOOLME MBER(Mandat ory)

0

0

8/7/2013

华为机密,未经许可不得扩散

第807页,共3267页

162734118.xls.ms_office1

文档密级:

RncPool RncPoolNam Name e

ADD RNCPOOL(Ma RNC pool name. String Type ndatory)

1~20 charaters

RncProtclVer

ADD Neighboring RNC protocol NRNC(Mandat RNC protocol version ory) version.

R99, R4, R99, R4, Enumeratio R5, R6, R7 R5, R6, R7 n Type

RPTTHD

This parameter Decrease rate ADD specifies the alarm report IPLOGICPORT decrease rate threshold (Optional) alarm report threshold.

Interval Type

20~99

20~99

8/7/2013

华为机密,未经许可不得扩散

第808页,共3267页

162734118.xls.ms_office1

文档密级:

RrcCause

This parameter specifies the cause of RRC connection establishment, Cause of RRC SET that is, the value connection RRCESTCAUS of the establishment E(Mandatory) Establishment cause IE in the RRC CONNECTION REQUEST message.

ORIGCON VCALLES T, ORIGSTRE AMCALLE ST, ORIGINTE RCALLES T, ORIGBKG CALLEST, ORIGSUBS TRAFFCA LLEST, TERMCON Enumeratio VCALLES n Type T, TERMSTR EAMCALL EST, TERMINT ERCALLE ST, TERMBKG CALLEST, EMERGCA LLEST, INTERRAT CELLRESE LEST, INTERRAT

ORIGCON VCALLES T, ORIGSTRE AMCALLE ST, ORIGINTE RCALLES T, ORIGBKG CALLEST, ORIGSUBS TRAFFCA LLEST, TERMCON VCALLES T, TERMSTR EAMCALL EST, TERMINT ERCALLE ST, TERMBKG CALLEST, EMERGCA LLEST, INTERRAT CELLRESE LEST, INTERRAT

Minimum Number of RrcConnEsta RRC bAttMinNum Connection Request

The minimum number of RRC connection request per SPU to report KPI alarm. In a checking period,if the number of RRC connection SET request is higher Interval KPIALMTHD( than the threshold Type Optional) and the RRC connnection setup successful ratio is lower than the related threshold,the KPI alarm of RRC connection setup ratio is reported.

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第809页,共3267页

162734118.xls.ms_office1
Threshold of RRC connection setup successful ratio per SPU to report KPI alarm. In a checking Threshold of period,if the ratio RRC SET is lower than this RrcConnEsta Connection KPIALMTHD( threshold and the bSuccRatioTh Setup Optional) number of RRC d Successful connection Ratio request is higher than the related threshold,the KPI alarm of RRC connection setup ratio is reported. Wait time in RRC connection Wait Time In reject message, RRC SET the time period RrcConnRej Connection STATETIMER( the UE has to WaitTmr Reject Optional) wait before Message repeating the rejected procedure of RRC A timer used to SET wait for initial STATETIMER( direct Optional) transmission.

文档密级:

Interval Type

0~100

0~100

Interval Type

0~15

0~15

RRC initial RrcInitDtTmr DT timer

Interval Type

1~10000

1~10000

RRC Iu release RrcIuRelCmd command Tmr timer

A timer used to SET wait for the Iu Interval STATETIMER( release command Type Optional) message in RRC procedure.

1~10000

1~10000

A timer used to RRC paging SET wait for the RrcPaingTyp type 1 response STATETIMER( response to e1Tmr timer Optional) paging type 1 in RRC procedure. A timer used to retransmit the RRC release SET RRC RrcRelRetran retransmission STATETIMER( CONNECTION Tmr timer Optional) RELEASE message to UE.

Interval Type

1~10000

1~10000

Interval Type

1~5000

1~5000

8/7/2013

华为机密,未经许可不得扩散

第810页,共3267页

162734118.xls.ms_office1
A timer used to wait for the RRC RLC SET acknowledgement completion RrcRlcAckC STATETIMER( of radio link acknowledgem mpTmr Optional) control (RLC) ent timer completion in RRC procedure. A timer to RNC wait for the RRC security SET response to mode RrcSecrtMod STATETIMER( security mode completion eCmpTmr Optional) command from timer UE in security mode procedure.

文档密级:

Interval Type

1~3000

1~3000

Interval Type

1~10000

1~10000

A timer used to wait for RRC SET RRC UE connection setup Interval RrcUeRspTm STATETIMER( response timer complete message Type r Optional) from UE in RRC procedure.

1~10000

1~10000

Add To RSCGRPFLA Rscgrp Flag G

This field ADD indicate whether AAL2PATH(M the AAL2PATH andatory) is belong to resource group.

Enumeratio NO, YES n Type

NO, YES

RSCGRPN

Rscgrp No.

Number of the ADD resource group AAL2PATH(M that the andatory) AAL2PATH belongs to.

Interval Type

0~119

0~119

8/7/2013

华为机密,未经许可不得扩散

第811页,共3267页

162734118.xls.ms_office1

文档密级:

RSCGRPN

Rscgrp No.

Number of the ADD resource group IPPATH(Manda that the IP Path tory) belongs to.

Interval Type

0~119

0~119

Resource Management RscMngMode Mode

Indicating the ADD resource NODEB(Option management al) mode.

SHARE(Sh SHARE, are), Enumeratio EXCLUSIV EXCLUSIV n Type E E(Exclusive )

Resource RSCMNGM management ODE mode

This parameter specifies the resource management ADD mode. If the IPLOGICPORT SHARE mode is (Mandatory) adopted, the ADD SHARE, SHARE, logical port can RSCGRP(Mand Enumeratio EXCLUSIV EXCLUSIV be shared by atory) n Type E E multiple ADD operators. If the ATMLOGICPO EXCLUSIVE RT(Optional) mode is adopted, the logical port can be used by only one operator. COMMISSI This parameter ONING(Co LCK specifies the mmissionin COMMISSI CMCTRL(Man reason to lock the Enumeratio g), ONING,UP datory) CM control n Type UPGRADE GRADE,RE rights. (Upgrade), STORE RESTORE( Restore)

RSNDES

Lock Reason

8/7/2013

华为机密,未经许可不得扩散

第812页,共3267页

162734118.xls.ms_office1

文档密级:

RSPTMR

Timer_NoResponse

ADD No-Response SAALLNK(Opt Timer. ional)

Interval Type

UNI: 5000~2000 0 1200~2000 NNI: 0 1200~2000 0

CN Type by RSTCNTYPE Reset

CN reset type. 1. ALL_NODES: resetting all CN RST ALL_NOD ALL_NOD nodes. Enumeratio IU(Mandatory) 2. BY_CNID: ES, ES,BY_CNI n Type BY_CNID D resetting the CN nodes specified by [CN ID].

RSTFUN

Restart switch

ON is open this ADD function and OFF Enumeratio OFF, ON OPC(Optional) is not. n Type

OFF, ON

The times of resending the reset message to Times of SET Interval CN after the RstRsndNum resending reset IUTIMERAND Type response is not message to CN NUM(Optional) received upon the expiry of the timer. RSTTYPE Reset Type

0~5

0~5

RST ALL_RNC, RNC Type to be ALL_RNC, IUR(Mandatory Enumeratio SINGLE_R reset. SINGLE_R ) n Type NC NC

8/7/2013

华为机密,未经许可不得扩散

第813页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara1

Reserved Parameter1

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara1

Reserved parameter 1

SET Reserved RRCTRLSWIT parameter 1. CH(Optional)

Bit Field Type

RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, RSVDBIT1 _BIT8, RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1

This parameter is set to 0 or 1 according to the related domains.

8/7/2013

华为机密,未经许可不得扩散

第814页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara1

Reserved parameter 1

ADD Reserved NRNC(Optional parameter 1. )

Bit Field Type

RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, Each bit RSVDBIT1 can be set _BIT8, ON or OFF RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1

8/7/2013

华为机密,未经许可不得扩散

第815页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara1

Reserved parameter 1

ADD Reserved CNNODE(Opti parameter 1. onal)

Bit Field Type

RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, Each bit RSVDBIT1 can be set _BIT8, ON or OFF RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1

8/7/2013

华为机密,未经许可不得扩散

第816页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara1

Reserved parameter 1

ADD CELLALGOS WITCH(Option al) ADD NODEBALGO PARA(Optional ) SET CACALGOSWI TCH(Optional)

The algorithms with the above values represent are as follow: RsvdBit1: Control RTWP Antiinterfence algorithm. RsvdBit2: Legacy hsdpa admission control algorithm Bit Field in MIMO cell. Type RsvdBit3~RsvdBi t16:Reserved Switch. If RsvdBit1 is selected, the corresponding algorithms will be enabled; otherwise, disabled.

RsvdBit1(R eserved Switch 1), RsvdBit2(R eserved Switch 2), RsvdBit3(R eserved Switch 3), RsvdBit4(R eserved Switch 4), RsvdBit5(R eserved Switch 5), RsvdBit6(R eserved Switch 6), RsvdBit7(R eserved Switch 7), RsvdBit8(R eserved Switch 8), RsvdBit9(R eserved Switch 9), RsvdBit10( Reserved Switch 10), RsvdBit11(

RsvdBit1, RsvdBit2, RsvdBit3, RsvdBit4, RsvdBit5, RsvdBit6, RsvdBit7, RsvdBit8, RsvdBit9, RsvdBit10, RsvdBit11, RsvdBit12, RsvdBit13, RsvdBit14, RsvdBit15, RsvdBit16

Reserved RSVDPARA Parameter 1 1

This parameter SET specifies DEVPATCHPA parameter 1 RA(Optional) reserved for the future use.

Enumeratio OFF, ON n Type

ON,OFF

RsvdPara10

Reserved Parameter10

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

8/7/2013

华为机密,未经许可不得扩散

第817页,共3267页

162734118.xls.ms_office1

文档密级:

Reserved RSVDPARA Parameter 10 10

This parameter SET specifies DEVPATCHPA parameter 10 RA(Optional) reserved for the future use.

Interval Type

0 to 0~4294967 4294967295 295

RsvdPara11

Reserved Parameter11

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara12

Reserved Parameter12

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara13

Reserved Parameter13

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara14

Reserved Parameter14

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara15

Reserved Parameter15

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara16

Reserved Parameter16

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

8/7/2013

华为机密,未经许可不得扩散

第818页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara2

Reserved Parameter2

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

RsvdPara2

Reserved parameter 2

ADD Reserved NRNC(Optional parameter 2. )

Interval Type

0~4294967 0~4294967 295 295

RsvdPara2

Reserved parameter 2

ADD Reserved CNNODE(Opti parameter 2. onal)

Interval Type

0~4294967 0~4294967 295 295

RsvdPara2

Reserved parameter 2

ADD CELLALGOS WITCH(Option al) ADD Reserved NODEBALGO parameter 2. PARA(Optional ) SET CACALGOSWI TCH(Optional) This parameter SET specifies DEVPATCHPA parameter 2 RA(Optional) reserved for the future use.

Interval Type

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 2 2

Enumeratio OFF, ON n Type

ON,OFF

RsvdPara3

Reserved Parameter3

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

8/7/2013

华为机密,未经许可不得扩散

第819页,共3267页

162734118.xls.ms_office1
ADD CELLALGOS WITCH(Option al) ADD Reserved NODEBALGO parameter 3. PARA(Optional ) SET CACALGOSWI TCH(Optional) This parameter SET specifies DEVPATCHPA parameter 3 RA(Optional) reserved for the future use.

文档密级:

RsvdPara3

Reserved parameter 3

Interval Type

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 3 3

Enumeratio OFF, ON n Type

ON,OFF

RsvdPara4

Reserved Parameter4

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 4 4

This parameter SET specifies DEVPATCHPA parameter 4 RA(Optional) reserved for the future use.

Enumeratio OFF, ON n Type

ON,OFF

RsvdPara5

Reserved Parameter5

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 5 5

This parameter SET specifies DEVPATCHPA parameter 5 RA(Optional) reserved for the future use.

Enumeratio OFF, ON n Type

ON,OFF

8/7/2013

华为机密,未经许可不得扩散

第820页,共3267页

162734118.xls.ms_office1

文档密级:

RsvdPara6

Reserved Parameter6

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 6 6

This parameter SET specifies DEVPATCHPA parameter 6 RA(Optional) reserved for the future use.

Enumeratio OFF, ON n Type

ON,OFF

RsvdPara7

Reserved Parameter7

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 7 7

This parameter SET specifies DEVPATCHPA parameter 7 RA(Optional) reserved for the future use.

Interval Type

0 to 0~4294967 4294967295 295

RsvdPara8

Reserved Parameter8

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

Reserved RSVDPARA Parameter 8 8

This parameter SET specifies DEVPATCHPA parameter 8 RA(Optional) reserved for the future use.

Interval Type

0 to 0~4294967 4294967295 295

RsvdPara9

Reserved Parameter9

SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.

0~4294967 0~4294967 295 295

8/7/2013

华为机密,未经许可不得扩散

第821页,共3267页

162734118.xls.ms_office1

文档密级:

Reserved RSVDPARA Parameter 9 9

This parameter SET specifies DEVPATCHPA parameter 9 RA(Optional) reserved for the future use.

Interval Type

0 to 0~4294967 4294967295 295

RT

NONThis parameter REVERTIV SET specifies the Revertive type Enumeratio E, MSP(Optional) revertive type of n Type REVERTIV the MSP function. E

NONREVERTIV E, REVERTIV E

Routing RTCONTEX Context T

ADD M3LE(Optional ) ADD M3DE(Optional )

Different types of M3UA local Interval entities must have Type different routing contexts.

0~4294967 0~4294967 295 295

The rate of RTCP bandwidth by the Iu CS bandwidth. For RATE OF ADD example if this Interval RTCPBWRat RTCP CNNODE(Opti value is 1, it Type io BANDWIDTH onal) expresses that the allocated RTCP path bandwidth is 1% of the RTP path bandwidth.

1~5

1~5

8/7/2013

华为机密,未经许可不得扩散

第822页,共3267页

162734118.xls.ms_office1

文档密级:

Timer for state transition from CPC_HSPA to E_FACH of realtime services, used to detect whether a realtime service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) Realtime CPC SET state is in stable RtCpc2EFach to E_FACH UESTATETRA Interval low activity state. StateTransTi Transition NSTIMER(Opti Type The too small mer Timer onal) parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第823页,共3267页

162734118.xls.ms_office1
Timer for state transition from CPC_HSPA to FACH of realtime services, used to detect whether a realtime service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) Realtime CPC SET state is in stable to FACH UESTATETRA Interval RtCpc2FState low activity state. Transition NSTIMER(Opti Type TransTimer The too small Timer onal) parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.

文档密级:

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第824页,共3267页

162734118.xls.ms_office1
Whether to support RTCP function.It is valid only if the Iu interface is CS domain and the transtype is IP. When RTCP switch is on, it takes statistics of the total lost number of RTP packets, the loss ADD rate of RTP CNNODE(Opti packets, the Enumeratio OFF, ON onal) Round Trip Time n Type (RTT), the average delay jitter of packets received over a single IP path via RTCP packets. Analyze the performance statistic of the above objects, overall evaluation the situation of the network. This parameter ADD specifies the BAMIPRT(Man destination IP datory) address.

文档密级:

RTCPSwitch

RTCP SWITCH

OFF,ON

RTDEST

Destination network address

IP Address Type

0.0.0.0 to 255.255.255 .255

Destination RTDESTMA address mask SK

This parameter ADD specifies the BAMIPRT(Man mask of the datory) destination address.

IP Address Type

0.0.0.0 to 255.255.255 .255

8/7/2013

华为机密,未经许可不得扩散

第825页,共3267页

162734118.xls.ms_office1

文档密级:

Timer for state transition from DCH or HSPA to E_FACH of realtime services, used to detect whether a realtime service UE in CELL_DCH state is in stable Realtime DCH low activity state. SET or HSPA to The too small RtDH2EFach UESTATETRA Interval E_FACH parameter cannot StateTransTi NSTIMER(Opti Type Transition probably confirm mer onal) Timer that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.

1~65535

1~65535

8/7/2013

华为机密,未经许可不得扩散

第826页,共3267页

162734118.xls.ms_office1

文档密级:

Timer for state transition from DCH or HSDPA to FACH of realtime services, used to check whether the UE in the CELL_DCH state with realtime services is in the stable low activity state. If Realtime DCH the value of this SET or HSPA To parameter is too UESTATETRA Interval RtDH2FState FACH low, whether the NSTIMER(Opti Type TransTimer Transition UE is in the onal) Timer stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.

1~65535

1~65535

Pending time after the traffic D250, volume event 4B D500, RT SET is reported. This D1000, RtDH2FTvm D/HSPA2F 4B UESTATETRA parameter is used Enumeratio D2000, PTAT Pending Time NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported.

250, 500, 1000, 2000, 4000, 8000, 16000

8/7/2013

华为机密,未经许可不得扩散

第827页,共3267页

162734118.xls.ms_office1

文档密级:

D8, D16, D32, D64, D128, D256, D512, This parameter is D1024, used to check D2k, D3k, whether the UE in D4k, D6k, the low activity D8k, D12k, state. If the UE is RT SET D16k, on DCH or HSPA RtDH2FTvm D/HSPA2F 4B UESTATETRA Enumeratio D24k, channel, the low Thd Threshold NS(Optional) n Type D32k, activity counter D48k, increases by 1 D64k, every time traffic D96k, volume event 4B D128k, is reported. D192k, D256k, D384k, D512k, D768k

8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is RT SET D160, reported. This RtDH2FTvm D/HSPA2F 4B UESTATETRA Enumeratio D200, parameter TimeToTrig Time NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered.

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第828页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services E_FACH2CPC RtEFach2Cpc UESTATETRA from E_FACH to _HSPA 4A TvmThd NS(Optional) HSPA with CPC Threshold technology. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from E_FACH to HSPA with CPC technology. This parameter prevents RT SET unnecessary RtEFach2Cpc E_FACH2CPC UESTATETRA reports that are TvmTimeToT _HSPA 4A NS(Optional) caused by traffic rig Time volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,

文档密级:

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第829页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the RT transition of realSET E_FACH2D/H time services RtEFach2DH UESTATETRA SPA 4A from E_FACH to TvmThd NS(Optional) Threshold DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from E_FACH to DCH or HSPA. This parameter prevents unnecessary RT SET RtEFach2DH reports that are E_FACH2D/H UESTATETRA TvmTimeToT caused by traffic SPA 4A Time NS(Optional) rig volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,

文档密级:

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第830页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services RtF2CpcTvm F2CPC_HSPA UESTATETRA from FACH to Thd 4A Threshold NS(Optional) HSPA with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from FACH to HSPA with CPC technology. This parameter prevents RT SET unnecessary RtF2CpcTvm F2CPC_HSPA UESTATETRA reports that are TimeToTrig 4A Time NS(Optional) caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,

文档密级:

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第831页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services RtF2DHTvm F2D/HSPA 4A UESTATETRA from FACH to Thd Threshold NS(Optional) DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from FACH to DCH or HSPA. This parameter prevents unnecessary RT SET reports that are RtF2DHTvm F2D/HSPA 4A UESTATETRA caused by traffic TimeToTrig Time NS(Optional) volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,

文档密级:

16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第832页,共3267页

162734118.xls.ms_office1
It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO alpha value] must ADD be less than the Interval SCTPLNK(Opti [RTO beta value]. Type onal) When [RTO beta value] is a constant, the larger this parameter is set, the less sensitive it becomes to the link delay. It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO beta value] must be greater than ADD the [RTO alpha Interval SCTPLNK(Opti value]. When Type onal) [RTO alpha value] is a constant, the larger this parameter is set, the more sensitive it becomes to the link delay.

文档密级:

RTOALPHA

RTO alpha value

0~100

0~100

RTOBETA

RTO beta value

0~100

0~100

RTOINIT

RTO initial value

When [RTO max value] and [RTO max value] are constants, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.

1000~6000 1000~6000 0 0

8/7/2013

华为机密,未经许可不得扩散

第833页,共3267页

162734118.xls.ms_office1

文档密级:

RTOMAX

RTO max value

When [RTO max value] is a constant, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.

1000~6000 1000~6000 0 0

RTOMIN

RTO min value

When [RTO max value] is a constant, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.

1000~6000 1000~6000 0 0

RTX

Route index

ADD Route index, a Interval AAL2RT(Optio logical number of Type nal) the route.

0~4294967 0~4294967 295 295

RUS

Rate up step

This parameter ADD specifies the rate Interval IPLOGICPORT up step of the Type (Optional) logical port.

0~1000

0~1000

8/7/2013

华为机密,未经许可不得扩散

第834页,共3267页

162734118.xls.ms_office1

文档密级:

RUSPRD

Rate up step adjust period

This parameter ADD specifies the Interval IPLOGICPORT period of Type (Optional) adjusting the rate up step.

1~100

100~10000

RXBW

Backward bandwidth

This parameter ADD specifies the Interval ATMLOGICPO backward Type RT(Mandatory) bandwidth of the logical port.

10~2810

530~14893 0

RXBW

Backward bandwidth

ADD Backward Interval IPPATH(Manda bandwidth of the Type tory) IP path.

1~3000000 1~3000000

8/7/2013

华为机密,未经许可不得扩散

第835页,共3267页

162734118.xls.ms_office1

文档密级:

RxBw

Backward Bandwidth

This parameter is valid only when Transport Resource Group ADD Type is ATM or Interval RSCGRP(Mand Transport Type atory) Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第836页,共3267页

162734118.xls.ms_office1

文档密级:

RXTRFX

RX traffic record index

ADD SAALLNK(Ma ndatory) ADD AAL2PATH(M Receive traffic andatory) record index of ADD the SAAL link. VPCLCX(Mand atory) ADD IPOAPVC(Opti onal)

Interval Type

100~1999

100~1999

8/7/2013

华为机密,未经许可不得扩散

第837页,共3267页

162734118.xls.ms_office1
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes greater than a certain threshold, the SET event 6F will be Interval HOCOMM(Opt triggered. Type ional) This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE RxTx time difference should

文档密级:

6F event RxTxtoTrig6 trigger F threshold

768~1280

768~1280

8/7/2013

华为机密,未经许可不得扩散

第838页,共3267页

162734118.xls.ms_office1
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes smaller than a certain threshold, the SET event 6G will be Interval HOCOMM(Opt triggered. This Type ional) parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE RxTx time difference should No. of the SAAL link that bears the ADD CCP.For detailed Interval CCP(Mandatory information of Type ) this parameter, refer to 3GPP TS 25.430.

文档密级:

6G event RxTxtoTrig6 trigger G threshold

768~1280

768~1280

SAALLNKN

SAAL link No.

0~699

0~699

SAALLNKN

SAAL link No.

No. of the SAAL link.For detailed ADD information of Interval NCP(Mandatory this parameter, Type ) refer to 3GPP TS 25.430.

0~699

0~699

8/7/2013

华为机密,未经许可不得扩散

第839页,共3267页

162734118.xls.ms_office1

文档密级:

SAALLNKN

SAAL link No.

ACT VCLCC(Manda tory) LOP VCL(Mandator y)

This parameter specifies the number of an SAAL link carried on the VCL.

Interval Type

0~699

0 to 699

8/7/2013

华为机密,未经许可不得扩散

第840页,共3267页

162734118.xls.ms_office1

文档密级:

ADD ADJNODE(Ma ndatory) SAALLNKN Saal Link No. ADD MTP3LNK(Ma ndatory)

Number of the SAAL link Interval bearing the AAL2 Type signaling to the adjacent node.

0~699

0~699

Interface type of the SAAL link.The interface ADD type of links on SAALLNKT Interface type SAALLNK(Ma Iub is UNI. The ndatory) interface type of links on Iu and Iur is NNI. SAAL link connection timer. It is a protection SAAL link SET timer waiting for SAALTMR connection MTP3TMR(Opt a SAAL response timer ional) after a link setup request is sent to SAAL.

Enumeratio UNI, NNI n Type

UNI, NNI

Interval Type

35000~120 35000~120 000 000

8/7/2013

华为机密,未经许可不得扩散

第841页,共3267页

162734118.xls.ms_office1
PLMN-Id, LAC and SAC together compose the Service Area ID (SAI). The SAI is used to define an area composed of one or more cells in the same location area. This area is called Interval service area, Type which indicates the location of a UE to the CN. This parameter is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003.

文档密级:

SAC

Service area code

ADD SAC(Mandatory ) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD CZ(Mandatory)

0~65535

0~65535

Indicating ADD whether the Iub Satellite Trans SATELLITEI NODEB(Option interface supports Enumeratio Ind ND al) satellite n Type transmission.

TRUE(True TRUE, ), FALSE FALSE(Fal se)

8/7/2013

华为机密,未经许可不得扩散

第842页,共3267页

162734118.xls.ms_office1
Timing offset between the SCCPCH and PCCPCH in the cell. As defined by the 25.211 protocol, the PICH timing is 7680 chips prior to its corresponding SCCPCH frame timing. If the offset of the SCCPCH timing ADD from the Interval SCCPCHBASI PCCPCH timing Type C(Optional) is smaller than 30 (x 256 chips), the corresponding CFN decreases by 1. Then, the difference between the PICH CFN and the corresponding SCCPCH CFN is 2. However, in the 25.435 protocol, the PI information and paging message

文档密级:

SCCPCH SCCPCHOffs offset et

0~149

0~38144,ste p:256

8/7/2013

华为机密,未经许可不得扩散

第843页,共3267页

162734118.xls.ms_office1

文档密级:

SCR

Sustainable cell rate

This parameter ADD specifies the ATMTRF(Opti average rate. onal) Physical unit: cell/s or kbit/s.

Interval Type

30~117924

30 to 117924

ScrambCode

Scrambling code

Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the primary scrambling code for the SCCPCH ADD bearing the PCH. Interval SCCPCHBASI It can be set to the Type C(Mandatory) primary scrambling code or secondary scrambling code for the SCCPCH that does not carry the PCH. For detailed information of this parameter, refer to 3GPP TS 25.433.

0~15

0~15

8/7/2013

华为机密,未经许可不得扩散

第844页,共3267页

162734118.xls.ms_office1

文档密级:

Scramble SCRAMBLE Switch SW

This parameter specifies the state of the scramble SET switch. The E1T1(Optional) setting of this Enumeratio ON, OFF SET parameter should n Type OPT(Optional) be consistent with that at the peer end.

ON, OFF

ADD SCTPLNK(Man datory) ADD M3LNK(Manda tory) Number of the SCTPLNKN SCTP link No. ADD SCTP link. CCP(Mandatory ) ADD NCP(Mandatory )

Interval Type

0~599

0~599

8/7/2013

华为机密,未经许可不得扩散

第845页,共3267页

162734118.xls.ms_office1

文档密级:

SDAY

Start date

This parameter SET Interval specifies the start TZ(Mandatory) Type date of the DST.

1~31

1 to 31

SDENABLE SD Enable

This parameter SET DISABLE, DISABLE, specifies whether Enumeratio MSP(Optional) ENABLE ENABLE the SD is enabled. n Type

SDSFPRI

Seed

This parameter specifies the SET SDSF Priority priority of the SF MSP(Optional) event and the SD event. Seed of the pseudo-random Seed of the sequence ADD pseudo-random generator. It can IPDL(Mandator sequence prevent idle y) generator period of different NodeBs from overlapping.

HIGH, Enumeratio LOW n Type

HIGH, LOW

Interval Type

0~63

0~63

8/7/2013

华为机密,未经许可不得扩散

第846页,共3267页

162734118.xls.ms_office1

文档密级:

SelectType

Detect type

STR NODEBDETE CT(Optional)

This parameter SINGLE(Si specifies the type ngle SINGLE, Enumeratio of the NodeB NodeB), ALL n Type detect. ALL(ALL NodeB)

Sequence of SeqOfUserRe user release l

This parameter indicates whether MBMS_RE ADD the MBMS L(MBMS MBMS_RE CELLOLC(Opti service is released Enumeratio service), L, onal) first or user first n Type USER_REL USER_REL when the overload (UE) occurs.

ServerIP

This parameter ADD specifies the IP FTP Server IP FTPSCLTDPO address to be Address RT(Mandatory) accessed by the FTP client.

IP Address Type

0.0.0.0~255 .255.255.25 5

SERVERNA ME

Server name

This parameter specifies the server name for ADD CHAP PPPLNK(Mand authentication atory) during PPP or MLPPP link negotiation.

String Type -

0 to 63 character

Service Bit ServiceBitRat Rate e

ADD CELLMBMSS CCPCH(Manda tory) SET MBMSSCCPC H(Mandatory) ADD CELLMBMSF ACH(Mandator y) SET MBMSFACH( Mandatory) SET MTCH(Mandat

This parameter specifies the rate of the MBMS service carried on D16, D32, the common 16, 32, 64, Enumeratio D64, D128, channel. For 128, 256 n Type D256 details of this parameter, refer to the 3GPP TS 25.346.

8/7/2013

华为机密,未经许可不得扩散

第847页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies whether the service differential DRD algorithm will be applied. - ON: The service differential DRD algorithm will be applied.(If cellSET level DRD Service DRD(Optional) parameters are ServiceDiffDr differential drd ADD Enumeratio ON, OFF configured, the dSwitch switch CELLDRD(Opt n Type status of cell level ional) Service differential drd switch should also be considered.) - OFF: The service differential DRD algorithm will not be applied.

ON, OFF

ServiceId

Service ID

Uniquely SET identifying a Interval MBMSPERF(M MBMS service in Type andatory) the PLMN.

0~4294967 0~4294967 295 295

ServiceInd

CN domain indication

SUPPORT_ Indicating CS, ADD whether to SUPPORT_ NRNC(Mandat Enumeratio support CS, PS or PS, ory) n Type both domains. SUPPORT_ CS_AND_P S

SUPPORT_ CS, SUPPORT_ PS, SUPPORT_ CS_AND_P S

8/7/2013

华为机密,未经许可不得扩散

第848页,共3267页

162734118.xls.ms_office1
ADD CELLMBMSS CCPCH(Manda tory) SET MBMSSCCPC H(Mandatory) ADD CELLMBMSF ACH(Mandator y) SET MBMSFACH( Mandatory) SET MTCH(Mandat

文档密级:

ServiceType

Service Type

This parameter specifies the traffic class of the MBMS service STREAMI STREAMI carried on the Enumeratio NG, NG, common channel. n Type BACKGRO BACKGRO For details of this UND UND parameter, refer to the 3GPP TS 25.346.

SGSNFLG

This parameter is valid only when Adjacent Node ADD Type is IUPS.NO SGSN FLAG ADJNODE(Ma means the node is Enumeratio NO, YES ndatory) GGSN, and n Type GGSN need not to configure dpx parameter.

NO, YES

Sharing out SharingOutC capability APSMidLoad middle load

Numbers of incoming calls to be shared when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out SET threshold and CTRLPLNSHA Interval overload REPARA(Optio Type threshold, and nal) number of incoming calls in each second reaches the threshold, new arrival call attempts will be shared out to other SPU.

0~255

0~255

8/7/2013

华为机密,未经许可不得扩散

第849页,共3267页

162734118.xls.ms_office1
This parameter specifies the sharing type of a NodeB. The value "DEDICATED" indicates that all cells of the NodeB belong to one operator. The value DEDICATE "RANSHARING D(Dedicate ADD " indicates that d), Dedicated, Sharing Type SharingType NODEB(Manda cells of the Enumeratio RANSHAR RANSharin Of NodeB tory) NodeB can n Type ING(RAN g, MOCN belong to Sharing), different MOCN(MO operators, but a CN) cell only belongs to one operator. The value "MOCN"indicate s that every cell of the NodeB can belong to multioperators. Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this HCS inter-rat ADD parameter, the UE Interval reselection CELLHCS(Opti starts the interType threshold onal) system measurement so that better cells can be selected. For details, refer to 3GPP TS 25.304.

文档密级:

SHCSRat

-53~45

-105~91, step:2

8/7/2013

华为机密,未经许可不得扩散

第850页,共3267页

162734118.xls.ms_office1
This parameter specifies the handover attribute. If the SERVICE_HO_B ASED_ON_RNC _SWITCH is on, the handover setting of this parameter is HO_TO_G HO_TO_G applied. SM_SHOU SM_SHOU Otherwise, the LD_BE_PE LD_BE_PE handover setting RFORM, RFORM, assigned by the HO_TO_G HO_TO_G CN is applied. ADD SM_SHOU SM_SHOU TYPRABBASI Enumeratio LD_NOT_ LD_NOT_ HO_TO_GSM_S C(Mandatory) n Type BE_PERFO BE_PERFO HOULD_BE_PE RM, RM, RFORM: HO_TO_G HO_TO_G Handover to the SM_SHAL SM_SHAL 2G network is L_NOT_BE L_NOT_BE performed so long _PERFOR _PERFOR as 2G signals are M M available. HO_TO_GSM_S HOULD_NOT_B E_PERFORM: Handover to the 2G network is performed when 3G signals are

文档密级:

SHInd

Service Handover Indicator

8/7/2013

华为机密,未经许可不得扩散

第851页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold number of the soft handover failures. This parameter determines the reporting times of the events from the cell that fails to join the active set in soft handover, to trigger the rate reduction of the SET active set and the Interval INTRAFREQH attempt to join the Type O(Optional) active set. The smaller the value of this parameter, the easier it is for the cell that fails to join the active set in the load based soft handover to join the active set through the soft handover rate reduction strategy, but the easier it is to

文档密级:

Threshold ShoFailNumF number of orDwnGrd SHO failure

0~63

0~63

8/7/2013

华为机密,未经许可不得扩散

第852页,共3267页

162734118.xls.ms_office1
This parameter specifies the maximum evaluation period of the soft handover failure. When the rate reduction evaluation is performed on a cell that fails to join the active set, the evaluation timer is started. If Max the cell cannot SET evaluation fulfill the Interval INTRAFREQH ShoFailPeriod period of SHO condition of rate Type O(Optional) failure reduction before the timer expires, the evaluation and rate reduction retry on the cell will not be performed. The larger the value of the parameter, the greater the possibility that the target cell joins the active set. But only three parallel soft

文档密级:

0~120

0~120

8/7/2013

华为机密,未经许可不得扩散

第853页,共3267页

162734118.xls.ms_office1
When the RNC receives events 1A, 1C and 1D, the target cell can be added to the active set only when CPICH Ec/No of the target cell is higher than this absolute threshold. The purpose for setting this parameter is as follows: The Interval current events of Type soft handovers are defined on the basis of relative thresholds and have no requirement for the absolute quality. If the signal quality of added cells is too poor, the general quality of the active set cannot be obviously improved, but

文档密级:

ADD CELLINTRAF REQHO(Option al) Min quality SET SHOQualmin THD for SHO INTRAFREQH O(Optional) SET SMLC(Mandato ry)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第854页,共3267页

162734118.xls.ms_office1
Indicating whether to trigger soft handover cross the Iur interface between the RNC and the neighboring RNC: 1) CS_SHO_SWITC H. Indicating whether to trigger hard handover for CS cross the Iur interface. 2) HSPA_SHO_SW ITCH. Indicating whether to trigger hard handover for HSPA cross the Iur interface. 3) NON_HSPA_SH O_SWITCH. Indicating whether to trigger hard handover for PS(R99) cross the Flag of whether to include this neighboring relationship in the System Information Block 11 (SIB11). This parameter indicates whether the neighboring cell information is delivered in SIB11. FALSE: not to include the neighboring information in the SIB11. TRUE: to include the neighboring information in the

文档密级:

SHOTRIG

SHO cross IUR trigger

ADD NRNC(Mandat ory)

Bit Field Type

CS_SHO_S WITCH, HSPA_SH O_SWITC H, NON_HSP A_SHO_S WITCH

CS_SHO_S WITCH, HSPA_SH O_SWITC H, NON_HSP A_SHO_S WITCH

SIB11Ind

SIB11 Indicator

ADD INTRAFREQN CELL(Optional) ADD INTERFREQN CELL(Optional) ADD GSMNCELL(O ptional)

FALSE(Do not send), Enumeratio FALSE,TR TRUE(Send n Type UE )

8/7/2013

华为机密,未经许可不得扩散

第855页,共3267页

162734118.xls.ms_office1
Flag of whether to include this neighboring relationship in the System Information Block 12 (SIB12). This parameter indicates whether the neighboring cell information is delivered in SIB12. FALSE: not to include the neighboring information in the SIB12. TRUE: to include the neighboring information in the Determine whether some system information blocks are broadcast in this cell. If the corresponding system information block is selected, then send this system information block in this cell.

文档密级:

SIB12Ind

SIB12 Indicator

ADD INTRAFREQN CELL(Optional) ADD INTERFREQN CELL(Optional) ADD GSMNCELL(O ptional)

FALSE(Do not send), Enumeratio FALSE,TR TRUE(Send n Type UE )

SibCfgBitMa SIB switch p

ADD CELLSIBSWIT CH(Optional)

Bit Field Type

SIB2, SIB4, SIB12, SIB18, SIB11BIS

SIB2, SIB4, SIB12, SIB18, SIB11BIS

8/7/2013

华为机密,未经许可不得扩散

第856页,共3267页

162734118.xls.ms_office1
This parameter specifies the channel type and bit rate for RRC connection establishment. - FACH: The RRC connection is set up on the common channel. FACH, DCH_3.4K DCH_3.4K_SIG _SIGNALL NALLING: The ING, RRC connection DCH_6.8K is set up on the SET _SIGNALL 3.4 kbit/s RRCESTCAUS Enumeratio ING, dedicated E(Optional) n Type DCH_13.6 channel. K_SIGNAL LING, DCH_6.8K_SIG DCH_27.2 NALLING: The K_SIGNAL RRC connection LING is set up on the 6.8 kbit/s dedicated channel. DCH_13.6K_SIG NALLING: The RRC connection is set up on the 13.6 kbit/s

文档密级:

SigChType

channel type for RRC establishment

FACH, DCH_3.4K _SIGNALL ING, DCH_6.8K _SIGNALL ING, DCH_13.6 K_SIGNAL LING, DCH_27.2 K_SIGNAL LING

8/7/2013

华为机密,未经许可不得扩散

第857页,共3267页

162734118.xls.ms_office1

文档密级:

SIGLKSX

Signalling linkset index

ADD MTP3LKS(Man datory) ADD MTP3LNK(Ma ndatory) ADD MTP3RT(Mand Index of the atory) signalling link ADD set. M3RT(Mandato ry) ADD M3LKS(Mandat ory) ADD M3LNK(Manda tory)

Interval Type

0~118

0~118

SIGLNKID

ADD M3UA link code Signalling link Interval M3LNK(Manda in SPU ID Type tory) subsystem. Indicating ADD Bearing signal whether the FACH(Optional indication FACH bears ) signalling. ADD Signalling link Signalling link MTP3LNK(Ma code code. ndatory)

0~15

0~15

SigRbInd

FALSE, Enumeratio TRUE n Type Interval Type

FALSE, TRUE

SIGSLC

0~15

0~15

8/7/2013

华为机密,未经许可不得扩散

第858页,共3267页

162734118.xls.ms_office1

文档密级:

WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ SilverMaxMo AMR speech Enumeratio AMRC For SET BITRATE_ de service for silver n Type Silver Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K

6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85

8/7/2013

华为机密,未经许可不得扩散

第859页,共3267页

162734118.xls.ms_office1

文档密级:

NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) SilverMaxMo AMR speech Enumeratio 70K, AMRC For SET de service for silver n Type NBAMR_B Silver Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K

4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20

Downlink SingalDlMB maximum bit R rate of Signal

This parameter SET specifies the DL D3.4, USERMBR(Opt maximum bit rate Enumeratio D13.6, ional) of signal for PS n Type D27.2 domain user.

D3.4, D13.6, D27.2

Uplink SingalUlMB maximum bit R rate of Signal

This parameter SET specifies the UL D3.4, USERMBR(Opt maximum bit rate Enumeratio D13.6, ional) of signal for PS n Type D27.2 domain user.

D3.4, D13.6, D27.2

8/7/2013

华为机密,未经许可不得扩散

第860页,共3267页

162734118.xls.ms_office1

文档密级:

SIPADDR

Source IP address

PING IP(Mandatory)

This parameter IP Address specifies the Type source IP address.

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第861页,共3267页

162734118.xls.ms_office1

文档密级:

SIPDL

IMS SRB service downlink factor

ADD IMS SRB service Interval TRMFACTOR( downlink factor. Type Optional)

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第862页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

文档密级:

IMS SRB SIPPRIPATH primary path

ADD IMS SRB TRMMAP(Opti primary path. onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

SIPPRITH

IMS Signal IMS Signal pri ADD bearing primary path load LOADEQ(Opti path load threshold onal) threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第863页,共3267页

162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

文档密级:

ADD IMS SRB IMS SRB SIPSECPAT TRMMAP(Opti secondary path secondary path. H onal)

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

IMS Signal IMS Signal pri ADD primary sec path load LOADEQ(Opti secondary path SIPSECWHT ratio threshold onal) load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第864页,共3267页

162734118.xls.ms_office1

文档密级:

SIPUL

IMS SRB ADD IMS SRB service Interval service uplink TRMFACTOR( uplink factor. Type factor Optional)

0~100

0~100

HCS search SlimitSearch inter-rat limit Rat threshold

The UE does not start the interRAT measurement if it detects that the quality of the ADD serving cell is Interval CELLHCS(Opti higher than this Type onal) threshold. For detailed information of this parameter, refer to 3GPP TS 25.304.

-16~10

-32~20, step:2

8/7/2013

华为机密,未经许可不得扩散

第865页,共3267页

162734118.xls.ms_office1
This parameter defines the slot format used by the SCCPCH. The configuration of this parameter is relevant to the SF, pilot bit, and TFCI of the SCCPCH. For detailed information of this parameter, refer to 3GPP TS 25.433 and 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211.

文档密级:

SlotFormat

Slot format

ADD SCCPCHBASI C(Mandatory)

D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, Enumeratio D10, D11, n Type D12, D13, D14, D15, D16, D17

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17

SlotFormat1

Slot format 1

ADD PRACHSLOTF ORMAT(Optio nal)

Interval Type

0~3

0~3

SlotFormat2

Slot format 2

ADD PRACHSLOTF ORMAT(Optio nal)

Interval Type

0~3

0~3

SlotFormat3

Slot format 3

ADD PRACHSLOTF ORMAT(Optio nal)

Interval Type

0~3

0~3

SlotFormat4

Slot format 4

ADD PRACHSLOTF ORMAT(Optio nal)

Interval Type

0~3

0~3

8/7/2013

华为机密,未经许可不得扩散

第866页,共3267页

162734118.xls.ms_office1
Number of available PRACH ADD slot formats. For PRACHSLOTF detailed D1, D2, Enumeratio ORMAT(Mand information of D3, D4 n Type atory) this parameter, refer to 3GPP TS 25.211. The signalling route mask is used for sharing loads between signalling routes. Suppose that the number of 1s in the value is B0000, expressed as n. B0001, Then the B0010, maximum number B0011, of the routes for B0100, load sharing is B0101, 2^n. For example, B0110, ADD B0000 indicates B0111, N7DPC(Option that only one Enumeratio B1000, al) route can be used n Type B1001, for load sharing. B1010, B0001 and B1000 B1011, indicate that at B1100, most two routes B1101, can be used for B1110, load sharing B1111 while the others cannot. This mask AND the value of [Signalling link mask] specified by ADD MTP3LKS must be zero.

文档密级:

Number of SlotFormatNu PRACH slot m formats

D1, D2, D3, D4

SLSMASK

Signalling route mask

B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111

8/7/2013

华为机密,未经许可不得扩散

第867页,共3267页

162734118.xls.ms_office1
This parameter specifies the type of the start date. DATE indicates that the DST DATE(Inpu starts from a t with date), certain day. WEEK(Inpu SET WEEK indicates t with Enumeratio TZ(Mandatory) that the DST week), n Type starts from a DATEWEE certain week. K(Input DATEWEEK with date indicates that the and week) DST starts from a certain day in a certain week. CELLID_C ENTER, CELLID_R TT, OTDOA, AGPS

文档密级:

SM

StartType

DATE, WEEK, DATEWEE K

UE SmlcMethod Positioning Method

SET Method of SMLC(Optional positioning the ) UE.

Bit Field Type

A-GPS, OTDOA, CELLID_R TT, CELLID_C ENTER

This parameter Enable Smoke specifies whether CLOSE(Clo ADD SMOKE_MA Alarm Enumeratio se), CLOSE,OP the alarm EMU(Optional) SK Reporting n Type reporting for OPEN(Ope EN smoke is enabled. n) JAN(Januar y), FEB(Februa ry), MAR(Marc h), APR(April), MAY(May) This parameter , SET specifies the start Enumeratio JUN(June), TZ(Mandatory) month of the n Type JUL(July), DST. AUG(Augu st), SEP(Septe mber), OCT(Octob er), NOV(Nove mber), DEC(Dece

SMONTH

Start month

JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC

8/7/2013

华为机密,未经许可不得扩散

第868页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

This parameter specifies the ACT Interval number of the slot CRC(Optional) Type where the SPU is located. ADD RNCCBCPUID The Slot No. (Mandatory) ADD CBSADDR(Ma ndatory) SET NCELLDETEC TSWITCH(Man datory) RSPU slot No. ADD IURCOMMSC CP(Mandatory) ADD NODEB(Manda tory)

0,2,4,6,8,10

0~10, step: 2

SN

Slot No.

Interval Type

0,2,4,8,10

0,2,4,8,10

SN

Slot No.

Interval Type

0,2,4,8,10

{0},{2},{4} ,{8},{10}

SN

Slot No.

SWP This parameter Interval BRD(Mandator specifies the Type y) number of a slot.

0, 2, 4, 6, 8, 0,2,4,6,8,10, 10, 12, 14, 12,14,16,18, 16, 18, 20, 20,22,24,26 22, 24, 26

SN

Slot No.

This parameter LOP specifies the Interval VCL(Mandator number of the slot Type y) where the SPUa is located.

0,2,4,8,10

0, 2, 4, 8, 10

8/7/2013

华为机密,未经许可不得扩散

第869页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

LOD This parameter Interval PATCH(Option specifies the Type al) number of a slot.

0~27

0 to 27

8/7/2013

华为机密,未经许可不得扩散

第870页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

SET This parameter Interval OPTLOP(Mand specifies the Type atory) number of a slot.

14~27

14 to 27

SN

Slot No.

PING IP(Mandatory)

This parameter Interval specifies the Type number of a slot.

14~27

14 to 27

SN

Slot No.

ADD BRD(Optional) CLR BRD(Mandator y) STR CPUUSAGETS T(Mandatory) ULD RSTINFO(Man datory)

This parameter specifies the Interval number of a slot Type where the board is located.

0~27

0 to 27

8/7/2013

华为机密,未经许可不得扩散

第871页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

SET QUEUEMAP( Mandatory)

This parameter Interval specifies the Type number of a slot.

14~27

14 to 27

SN

Slot No.

SET This parameter Interval E1T1(Mandator specifies the Type y) number of a slot.

14~27

14 to 27

SN

Slot No.

ACT MSP(Mandator y) SET MSPCMD(Man datory) CLR MSPREP(Mand This parameter Interval atory) specifies the Type SWP number of a slot. ETHPORT(Ma ndatory) SET MSP(Mandator y) ADD ETHREDPORT (Mandatory)

14,16,18,20, 14,16,18,20, 22,24,26 22,24,26

8/7/2013

华为机密,未经许可不得扩散

第872页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

This parameter INH Interval specifies the BRD(Optional) Type number of a slot.

0~5,8~27

0 to 5,8 to 27

8/7/2013

华为机密,未经许可不得扩散

第873页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

This parameter specifies the number of a slot. For the logical uninhibition, the value range of UIN "Slot No." is Interval BRD(Optional) {{0},{2},{4},{8~ Type 27}}. For the physical uninhibition, the value range of "Slot No." is {{0~5},{8~27}}.

0~5,8~27

0 to 5, 8 to 27

SN

Slot No.

SET This parameter Interval COPTLNK(Ma specifies the Type ndatory) number of a slot.

14~27

14 to 27

8/7/2013

华为机密,未经许可不得扩散

第874页,共3267页

162734118.xls.ms_office1
ADD PPPLNK(Mand atory) STR IMATST(Mand atory) SET E1T1LOP(Man datory) LOP E1T1(Mandator y) STR E1T1TST(Man datory) This parameter TRC Interval specifies the IPADDR(Mand Type number of a slot. atory) SET CLK(Mandator y) ADD FRALNK(Mand atory) ADD TSCROSS(Man datory) ADD IMAGRP(Mand atory) ADD UNILNK(Mand This parameter indicates the number of the slot ACT where the board is Interval FAN(Mandator located. The Type y) board refers to the one on which the command is executed.

文档密级:

SN

Slot No.

14~27

14 to 27

SN

Slot No.

29,31

29,31

8/7/2013

华为机密,未经许可不得扩散

第875页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Slot No.

This parameter ACT specifies the slot Interval VCLCC(Manda that holds the Type tory) SPUa.

0,2,4,8,10

0, 2, 4, 8, 10

SN

Slot No.

Number of the ADD SPU slot where Interval SAALLNK(Ma the SAAL link is Type ndatory) terminated.

0,2,4,8,10

0, 2, 4, 8, 10

SN

Slot No.

This parameter is valid only when Adjacent Node Type is ADD UNI_AAL2SWIT Interval ADJNODE(Ma CH.Slot number Type ndatory) of the SAAL link bearing the AAL2 signaling to the adjacent node.

0,2,4,8,10

0, 2, 4, 8, 10

SN

Slot No.

Number of the ADD slot where the SCTPLNK(Man SCTP link is datory) terminated.

Interval Type

0,2,4,8,10

0, 2, 4, 8, 10

8/7/2013

华为机密,未经许可不得扩散

第876页,共3267页

162734118.xls.ms_office1

文档密级:

SN

Control slot No.

Number of the ADD slot where the Interval M3LNK(Manda SPU controlling Type tory) the M3UA link is located. SET Slot Number of PHBMAP(Man PHB map to datory) DSCP. Number of the slot where the ADD SPU subsystem MTP3LNK(Ma controlling the ndatory) MTP3-B link is located.

0,2,4,8,10

0,2,4,8,10

SN

Slot No.

Interval Type

14~27

14~27

SN

Slot No.

Interval Type

0,2,4,8,10

0,2,4,8,10

SNAC

ADD LASNAMAP( Sharing Mandatory) Sharing Network Interval Network Area ADD Area Code. Type Code IMSISNAMAP( Mandatory)

0~65535

0~65535

Indicating whether the SNAC need be configured. TRUE: The SNAC ADD TRUE, SNAC need be SnaExistInd Configuration IMSISNAMAP( Enumeratio FALSE configured. Indication Mandatory) n Type FALSE: The SNAC need not be configured.UE can access any cell of the PLMN.

TRUE,FAL SE

8/7/2013

华为机密,未经许可不得扩散

第877页,共3267页

162734118.xls.ms_office1
When it is set to ON, the RNC sends UMTS cell load information to the GSM during the noncoverage based system relocation in or out process. When it is set to OFF, the RNC does not send UMTS cell load information to the SET GSM during the INTERRATHO system relocation Enumeratio OFF, ON NCOV(Optional in or out process. n Type ) This parameter is designed for the UMTS network to cooperate with the GSM network. When the UE is handed over from the UMTS network to the GSM network, the RNC normalizes the load information of the best cell and sends it to the The OSP should be input in hexadecimal format and cannot be 0. In addition, it should be allocated in the SS7 network and cannot be repeated. If SPC ADD is BIT14 code, Interval OPC(Optional) the value range is Type H'1~H'3FFF(1~1 6383).f SPC is BIT16 code, the value range is H'1~H'FFFF(1~6 5535). If SPC is BIT24 code, the value range is H'1~H'FFFFFF(1 ~16777215).

文档密级:

Send Load SndLdInfo2G Info to GSM smInd Ind

OFF, ON

SPC

OSP code

BIT14: 1~16383 BIT16: 1~1677721 1~65535 5 BIT24: 1~1677721 5

8/7/2013

华为机密,未经许可不得扩散

第878页,共3267页

162734118.xls.ms_office1
Indicating the number of bits of the OSP code. ADD BIT14 means 14BIT14, OSP code bits OPC(Mandatory bit code,BIT16 Enumeratio BIT16, ) means 16-bit n Type BIT24 code,and BIT24 represents 24-bit code. The OSP should be input in divided number format. In ADD addition, it should String Type OPC(Optional) be allocated in the SS7 network and cannot be repeated.

文档密级:

SPCBITS

BIT14, BIT16, BIT24

SPCDNF

OSP code

1~11 characters

Indicating whether the UE speed estimation is allowed in this cell. Value ON indicates that the UE speed estimation is allowed in this cell. Value OFF indicates that the UE speed Algorithm estimation is not ADD Switch for UE allowed in this CELLHCSHO( Enumeratio ON, OFF SpdEstSwitch speed cell. Optional) n Type estimation The UE speed estimation cannot be triggered even if this switch is enabled in either of the following cases: -The cell is not configured as a HCS cell by ADD CELLHCS or MOD CELLHCS. -The algorithm switch for the RNC-oriented UE

ON,OFF

8/7/2013

华为机密,未经许可不得扩散

第879页,共3267页

162734118.xls.ms_office1

文档密级:

SPDF

Signal point data format

ADD N7DPC(Option Signal point data al) Enumeratio WNF, DNF WNF, DNF format. ADD n Type OPC(Optional)

SPEED

This parameter SET specifies the 10M, FE port speed ETHPORT(Opti Enumeratio transmission rate 100M onal) n Type over the FE port.

10M, 100M

For a highmobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. This parameter can be Speed set to 10 for dependent ADD SpeedDepend middle-speed UE, Interval scaling factor CELLSELRES entScalingFac which means no Type for reselection EL(Optional) tor influence upon delay reselection delay time. This parameter is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304.

0~10,255

{0~1},{255 }, step:0.1

8/7/2013

华为机密,未经许可不得扩散

第880页,共3267页

162734118.xls.ms_office1
This parameter identifies a group of cells that have specific capabilities for Interval four service types: R99 real- Type time services, R99 non-real-time services, HSPA services, and other services.

文档密级:

SpgId

Service priority group Identity

ADD SPG(Mandatory ) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry)

1~8

1~8

SPI

Scheduling Priority Indicator

SET SPIFACTOR(M andatory) SET SCHEDULEPR IOMAP(Mandat ory)

This parameter indicates the scheduling priority. The Interval value 15 indicates Type the highest priority and the value 0 indicates the lowest.

0~15

0~15

SPORTNO

Src Port NO.

This parameter STR specifies the Interval IPLOPTST(Ma number of the Type ndatory) source port of the IP loopback test.

1024~3584

1024 to 3584

8/7/2013

华为机密,未经许可不得扩散

第881页,共3267页

162734118.xls.ms_office1
It is used to decide whether the cell load level is "Heavy" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or higher than this threshold, the ADD load level of this Interval CELLPUC(Opti cell is heavy. Type onal) If the load level of a cell is heavy, the PUC algorithm will configure selection/reselecti on parameters for this cell to lead the UE camping on this cell to reselect another inter-frequency neighboring cell with light load. Hysteresis used to determine the cell load level. It is denoted by the ratio of NodeB TX power to the maximum TX power. It is used ADD to avoid the Interval CELLPUC(Opti unnecessary pingType onal) pong effect of a cell between two load levels due to tiny load change. For detailed information of this parameter, refer to 3GPP TS 25.304.

文档密级:

SpucHeavy

Load level division threshold 1

0~100

0~1, step:0.01

SpucHyst

Load level division hysteresis

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第882页,共3267页

162734118.xls.ms_office1
It is used to decide whether the cell load level is "Light" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or lower than this threshold, the ADD load level of this Interval CELLPUC(Opti cell is light. Type onal) If the load level of a cell is light, the PUC algorithm will configure selection/reselecti on parameters for this cell to lead the UE to reselect this cell rather than the previous inter-frequency neighboring cell

文档密级:

SpucLight

Load level division threshold 2

0~100

0~1, step:0.01

The threshold used by SPU process system. When the equivalent user number of this SPU system is over this SET SPU traffic threshold, latter SPUSHARETH SPUShareThd share threshold calls will be D(Optional) transferred to other SPU process system until equivalent user number is bellow this SPU traffic share threshold.

Interval Type

40~100

40~100

8/7/2013

华为机密,未经许可不得扩散

第883页,共3267页

162734118.xls.ms_office1
This parameter specifies the channel type of SRB. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried This parameter specifies whether [SRB channel type] is valid in the RRC connection setup procedure. - TRUE: [SRB channel type] is valid in the RRC connection setup procedure and other procedures. - FALSE: [SRB channel type] is invalid in the RRC connection setup procedure but valid in other procedures.

文档密级:

SRB channel SrbChlType type

SET FRCCHLTYPE PARA(Optional )

DCH(UL_D CH,DL_DC H), DCH, HSDPA(UL Enumeratio HSDPA, _DCH,DL_ n Type HSPA HSDSCH), HSPA(UL_ EDCH,DL_ HSDSCH)

SRB channel SrbChlTypeR type RRC rcEffectFlag effect flag

SET FRCCHLTYPE PARA(Optional )

TRUE, Enumeratio FALSE n Type

FALSE, TRUE

8/7/2013

华为机密,未经许可不得扩散

第884页,共3267页

162734118.xls.ms_office1

文档密级:

SRBDL

SRB service downlink factor

ADD SRB service TRMFACTOR( downlink factor. Optional)

Interval Type

0~100

0~100

SRBGBR

SRB MAC-c flow GBR

The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends SRB data on the Iub interface.

1~1000

1~1000

8/7/2013

华为机密,未经许可不得扩散

第885页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends SRB data on the Iub interface.

文档密级:

SRBMBR

SRB MAC-c flow MBR

1~2000

1~2000

SRB primary SRBPRIPAT path H

ADD SRB primary TRMMAP(Opti path. onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

8/7/2013

华为机密,未经许可不得扩散

第886页,共3267页

162734118.xls.ms_office1

文档密级:

SRBPRITH

ADD Signal bearing Signal pri path Interval LOADEQ(Opti primary path load load threshold Type onal) threshold.

0~100

0~100

ADD SRB SRB secondary SRBSECPAT TRMMAP(Opti secondary path path. H onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

Signal primary Signal pri sec ADD secondary path SRBSECWH path load ratio LOADEQ(Opti load ratio T threshold onal) threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第887页,共3267页

162734118.xls.ms_office1

文档密级:

SRBUL

SRB service uplink factor

ADD SRB service TRMFACTOR( uplink factor. Optional)

Interval Type

0~100

0~100

Source link SRCE1T1LN No. KN

This parameter specifies the source end of ADD Interval timeslot cross TSCROSS(Man Type connection, datory) corresponding to the electrical port of the board. This parameter ADD specifies the Interval CLKSRC(Mand priority level of Type atory) the clock source.

0~31

0 to 31

SRCGRD

Clock source priority

1~4

1 to 4

SRCGRD

Currently system clock priority

This parameter SET specifies the type Interval CLKMODE(Ma of the clock Type ndatory) source.

0~4

0 to 4

8/7/2013

华为机密,未经许可不得扩散

第888页,共3267页

162734118.xls.ms_office1

文档密级:

SRCIP

Source IP

This parameter ADD specifies the IP Address FLOW(Mandat source IP address Type ory) of the flow.

0.0.0.0~255 .255.255.25 5

SRCMEPID

MEP ID

PING MAC(Mandator This parameter y) specifies the ID TRC of a local MEP. MAC(Mandator y)

Interval Type

1~100

1 to 100

SRCT

Clock source type

BITS12MHZ, BITS22MHZ, BITS12MBPS, BITS2This parameter ADD 2MBPS, specifies the type CLKSRC(Mand Enumeratio GPS, of the clock atory) n Type 8KHZ, source. LINE1_8K HZ, LINE2_8K HZ, BITS1T1BPS, BITS2T1BPS

BITS12MHZ, BITS22MHZ, BITS12MBPS, BITS22MBPS, GPS, 8KHZ, LINE1_8K HZ, LINE2_8K HZ, BITS1T1BPS, BITS2T1BPS

8/7/2013

华为机密,未经许可不得扩散

第889页,共3267页

162734118.xls.ms_office1

文档密级:

SRCTSN

Source time slot No.

This parameter specifies the ADD number of the TSCROSS(Man source end of datory) timeslot cross connection.

TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), TS7(Time_s lot_7), TS8(Time_s Enumeratio lot_8), n Type TS9(Time_s lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

SRECTMR

SRN

Timer REPEAT_SREC. Frequency at which ER is allowed to be ADD Interval received. If the Timer_REPEA SAALLNK(Opt Type second ER T-SREC ional) message is received before the timer expires, the link is released. FMT DATA(Optional ) SET This parameter OFFLINE(Opti specifies the Interval Subrack No. onal) number of the Type SET RBS or RSS. ONLINE(Optio nal) ACT CRC(Optional)

45~90

45~90

0~5

0 to 5

8/7/2013

华为机密,未经许可不得扩散

第890页,共3267页

162734118.xls.ms_office1
This parameter ADD specifies the SUBRACK(Ma number of a ndatory) subrack. ADD BRD(Mandator y) SET NCELLDETEC TSWITCH(Man datory) SWP BRD(Mandator y) CLR BRD(Mandator y) SET MSPCMD(Man This parameter datory) specifies the CLR number of a MSPREP(Mand subrack. atory) ULD LOGTOBAM( Mandatory) STR CPUUSAGETS T(Mandatory) STR IMATST(Mand atory) SET E1T1LOP(Man datory) LOP

文档密级:

SRN

Subrack No.

Interval Type

1~5

1 to 5

SRN

Subrack No.

Interval Type

0~5

0 to 5

SRN

Subrack No.

This parameter SET specifies the CLK(Mandator number of the y) RBS subrack.

Interval Type

1~5

1 to 5

SRN

Subrack No.

This parameter ADD specifies the EMU(Mandator number of a y) subrack.

Interval Type

0~5

0 to 5

8/7/2013

华为机密,未经许可不得扩散

第891页,共3267页

162734118.xls.ms_office1
Number of the ADD subrack where the Interval SAALLNK(Ma SAAL link is Type ndatory) terminated.

文档密级:

SRN

Subrack No.

0~5

0~5

SRN

Subrack No.

This parameter is valid only when Adjacent Node Type is ADD UNI_AAL2SWIT Interval ADJNODE(Ma CH.Subrack Type ndatory) number of the SAAL link bearing the AAL2 signaling to the adjacent node.

0~5

0~5

SRN

Subrack No.

Number of the ADD subrack where the Interval SCTPLNK(Man SCTP link is Type datory) terminated. ADD Number of the RSCGRP(Mand subrack. atory) Number of the SUBRACK ADD where the SPU M3LNK(Manda controlling the tory) M3UA link is located. No. of the SET WRBS at which PHBMAP(Man the PHB map to datory) DSCP. Interval Type

0~5

0~5

SRN

Subrack No.

0~5

0~5

SRN

Control subrack No.

Interval Type

0~5

0~5

SRN

Subrack No.

Interval Type

0~5

0~5

8/7/2013

华为机密,未经许可不得扩散

第892页,共3267页

162734118.xls.ms_office1

文档密级:

SRN

Subrack No.

Number of the subrack where the ADD SPU subsystem Interval MTP3LNK(Ma controlling the Type ndatory) MTP3-B link is located.

0~5

0~5

SRName

ADD This parameter Subrack name SUBRACK(Ma specifies the String Type ndatory) name of a WRBS. When the parameter is set to YES, QoS control for DL BE services is based on the TCP and RLC retransmission. SET When the QOSACT(Optio Enumeratio NO, YES parameter is set to nal) n Type NO, QoS control for DL BE services is based on the TCP. In both situations, QoS control is not performed across the Iur interface.

None

Srnc Parameter for SrncBeDlRlc BE Downlink QosSwitch RLC QOS

NO, YES

SRNS relocationallowed traffic type. This parameter determines the bearing policy over the Iur interface. If the RT(Real parameter is set to time RT, only the realSRNS service), SET time service can relocationNRT(Non SrnsRabCnD SRNSR(Option trigger the static Enumeratio allowed traffic real time omainType al) relocation; if the n Type type service), parameter is set to ALL(All NRT, only the service) non-real-time service can trigger the static relocation; if the parameter is set to ALL, all services can trigger the static relocation.

RT,NRT,A LL

8/7/2013

华为机密,未经许可不得扩散

第893页,共3267页

162734118.xls.ms_office1
When [Measurement transfer delay by FP Node synchronization between SRNC and DRNC ]+[Estimated nonmeasurement delay offset] > [transfer delay provided by the Qos of the current traffic], the relocation will be Estimated non- SET triggered. The SRNSRDelay measurement SRNSR(Option value of this Offset delay offset al) parameter should be set according to the time delay concerned requirements of the most common services over the Iur interface. If the value is too small, unnecessary relocation will occur; if the value is too large, the QoS of the SRNS relocation expiry time. In order to avoid ping-pong relocation, the SRNS SET user, if SRNSRExpir relocation SRNSR(Option successfully yTime expiry time al) relocated, is not allowed to relocate again in the specified time of the parameter.

文档密级:

Interval Type

0~400

0~400

Interval Type

1~255

1~255

8/7/2013

华为机密,未经许可不得扩散

第894页,共3267页

162734118.xls.ms_office1
Time interval between two SRNS relocations based on Iur resource optimization. For each time interval, the RNC specifies several UEs to perform the relocation based on Iur resource optimization. The parameter should SET be set according Interval SRNSR(Option to the the time Type al) interval of the Iur source congestion report. The difference between the previous two values cannot be too large. Individually changing a parameter will cause the time difference in the congestion report and the relocation

文档密级:

SRNSR Iur SRNSRIurRe reselection selectTimerL timer en

1~100

1~100

8/7/2013

华为机密,未经许可不得扩散

第895页,共3267页

162734118.xls.ms_office1
If SRNSR_DSCR_ SEPRAT_DUR_ SWITCH of [SrnsrSwitch] in SET CORRMALGOS WITCH is on, after the separation of the SRNC and the CRNC, a timer starts. After the time is expired, the SRNS SET relocation is Interval SRNSR(Option triggered. This Type al) parameter determines the number of UEs over the Iur interface. If this parameter is set too large, it will cause too much unnecessary occupied Iur resources; if the parameter is set too small, pingpong relocation may occur.

文档密级:

Duration of triggering SrnsrSeparate static Duration relocation

1~255

1~255

8/7/2013

华为机密,未经许可不得扩散

第896页,共3267页

162734118.xls.ms_office1
SRNSR algorithm switch. 1) SRNSR_DSCR_I UR_RESRCE_S WITCH: When the switch is on, relocation for transmission optimization over the Iur interface is allowed. When there is congestion over SET the Iur interface, CORRMALGO the UE may be Bit Field SWITCH(Optio selected to initiate Type nal) relocation or DSCR if the UE has only a radio link over the Iur interface and the link have the same attributes as the congested link. Based on DSCRInd of ADD NRNC, the RNC decides whether to initiate relocation or DSCR. When the

文档密级:

SrnsrSwitch

SRNSR algorithm switch

SRNSR_DS CR_IUR_R ESRCE_S WITCH, SRNSR_DS CR_LOC_S EPRAT_S WITCH, SRNSR_DS CR_PROP G_DELAY _SWITCH, SRNSR_DS CR_SEPRA T_DUR_S WITCH

SRNSR_DS CR_IUR_R ESRCE_S WITCH, SRNSR_DS CR_LOC_S EPRAT_S WITCH, SRNSR_DS CR_PROP G_DELAY _SWITCH, SRNSR_DS CR_SEPRA T_DUR_S WITCH

8/7/2013

华为机密,未经许可不得扩散

第897页,共3267页

162734118.xls.ms_office1
Relocation trigger time after IURCCH. The relocation occurs after timeout. This parameter determines the probability of the relocation of the Iur common channel based on time separation. The larger the SET value of this Interval SRNSR(Option parameter, the Type al) more UEs are carried over this Iur channel, and the more Iur resource is occupied; if the value of this parameter is set too small, no UE will be carried on the Iur channel, thus causing the waste of resources.

文档密级:

Relocation SRNSRTrigT trigger timer imer after IurCCH

1~65535

1~65535

SRNTI

SRNTI

RST IUR(Mandatory UE SRNTI. )

Interval Type

0~1048575 0~1048575

8/7/2013

华为机密,未经许可不得扩散

第898页,共3267页

162734118.xls.ms_office1

文档密级:

SRT

Subrack type

SET This parameter CLK(Mandator specifies the type Enumeratio RSS, RBS y) of the subrack. n Type

RSS, RBS

Offset of the SSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the SSCH ADD Interval SSCHPower downlink transmit power SSCH(Optional) Type common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced.

-350~150

-35~15, step: 0.1

8/7/2013

华为机密,未经许可不得扩散

第899页,共3267页

162734118.xls.ms_office1
This parameter specifies the threshold for clearing an alarm CPU related to the occupancy SET CPU usage. alarm CPUTHD(Optio When the CPU clearance nal) usage is lower threshold than the value of this parameter, the alarm is cleared. This parameter specifies the threshold for reporting an alarm related to the CPU usage. When the CPU usage is higher CPU SET than the value of occupancy CPUTHD(Optio this parameter, alarm threshold nal) the alarm is reported. The value of this parameter must be higher than the value of "CPU occupancy alarm clearance threshold". This parameter specifies the type of source. ADD Source - SPEECH: TYPRABBASI description speech service C(Mandatory) - UNKNOWN: non-speech service

文档密级:

SSCPUAVE USAGEALM THD

Interval Type

20~99

20 to 99

SSCPUMAX USAGEALM THD

Interval Type

30~100

30 to 100

Ssd

SPEECH, SPEECH, Enumeratio UNKNOW UNKNOW n Type N N

8/7/2013

华为机密,未经许可不得扩散

第900页,共3267页

162734118.xls.ms_office1

文档密级:

DSP occupancy SSDSPAVEU alarm SAGEALMT clearance HD threshold

This parameter specifies the threshold for clearing an alarm SET related to the DSP Interval CPUTHD(Optio usage. When the Type nal) DSP usage is lower than the value of this parameter, the alarm is cleared.

20~99

20 to 99

This parameter specifies the threshold for reporting an alarm related to the DSP usage. When the DSP usage is higher DSP SET than the value of SSDSPMAX Interval occupancy CPUTHD(Optio this parameter, USAGEALM Type alarm threshold nal) the alarm is THD reported. The value of this parameter must be higher than the value of "DSP occupancy alarm clearance threshold".

30~100

30 to 100

8/7/2013

华为机密,未经许可不得扩散

第901页,共3267页

162734118.xls.ms_office1

文档密级:

HCS cell SsearchHCS reselection threshold

Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this ADD parameter, the UE Interval CELLHCS(Opti starts the intraType onal) frequency and inter-frequency measurements so that better cells can be selected. For details, refer to 3GPP TS 25.304.

-53~45

-105~91, step:2

SsearchRat

Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interRAT cell reselection procedure will be started. This Inter-RAT cell ADD parameter is not Interval reselection CELLSELRES configured when Type threshold EL(Optional) its value is 127. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection

{-16~10,127 32~20},{12 7},step:2

8/7/2013

华为机密,未经许可不得扩散

第902页,共3267页

162734118.xls.ms_office1

文档密级:

SSN

Subsystem No.

ACT CRC(Optional) CMP TBLDATA(Ma ndatory)

This parameter specifies the Interval subsystem No. of Type the SPU/MPU board.

0~3

0 to 3

SSN

Subsystem No.

ADD RNCCBCPUID (Mandatory) ADD NODEB(Option No. of the Interval al) subsystem to set. Type STR CPUUSAGETS T(Mandatory) ULD RSTINFO(Man datory)

0~3

0~3

ST

StartTime

This parameter SET Compound HOUR, specifies the start TZ(Mandatory) Type MIN, SEC time of the DST.

HOUR(hour ),MIN(minu te),SEC(sec ond)

8/7/2013

华为机密,未经许可不得扩散

第903页,共3267页

162734118.xls.ms_office1

文档密级:

ST

Service type

This parameter specifies the service type. CBR and RTVBR are realtime traffic and are usually carried on the control plane on the Iur, Iub, or IuUBR, CS interface. ADD CBR, NRTVBR and ATMTRF(Man Enumeratio RTVBR, UBR are nondatory) n Type NRTVBR, realtime traffic UBR_PLUS and are usually carried on the user plane and control plane of the Iu-PS interface. UBR_PLUS is usually carried on the OM plane.

UBR, CBR, RTVBR, NRTVBR, UBR_PLUS

When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the ADD number of faulty Statistic Block TYPRABQUA CRCs exceeds the Interval StaBlkNum5 Number For LITYMEAS(M specified Type A 5A Event andatory) threshold, event 5A is triggered. The length of the sliding window is specified by Statistic Block Number For 5A Event.

1~512

1~512

8/7/2013

华为机密,未经许可不得扩散

第904页,共3267页

162734118.xls.ms_office1
When the parameter is set to INACTIVE, the timed GPS frame ADD measurement is GPS Frame CELLGPSFRM not activated. Timing Active Enumeratio INACTIVE, INACTIVE, TIMING(Optio When the Flag n Type ACTIVE ACTIVE nal) parameter is set to ACTIVE, the timed GPS frame measurement is activated.

文档密级:

StartFlag

StartTime1

First Cell Dynamic ShutDown Interval Start Time

Start time of the ADD first interval when CELLDYNSHU Compound HOUR, the "Cell dynamic TDOWN(Mand Type MIN shutdown" feature atory) is valid.

00:00~23:5 9

StartTime2

Second Cell Dynamic ShutDown Interval Start Time

ADD CELLDYNSHU TDOWN(Mand atory)

Start time of the second interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.

00:00~23:5 9

StartTime3

Third Cell Dynamic ShutDown Interval Start Time

ADD CELLDYNSHU TDOWN(Mand atory)

Start time of the third interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.

00:00~23:5 9

StateIndTmr

SET CN protection CN protection IUTIMERAND timer timer. NUM(Optional)

Interval Type

1000~3000 1000~3000 00 00

8/7/2013

华为机密,未经许可不得扩散

第905页,共3267页

162734118.xls.ms_office1

文档密级:

Protection timer Sccp state ind ADD used in case of Interval StateIndTMR protection NRNC(Optional DSP intermittent Type timer ) at the neighboring RNC.

1~300

1~300

STATLEN

MaxSTAT

ADD Maximum length Interval SAALLNK(Opt of the STAT PDU Type ional) list.

3~67

3~67

STP

STP function switch

Indicating whether the ADD signalling point N7DPC(Option can perform the al) signalling transmission function.

Enumeratio OFF, ON n Type

OFF, ON

STPMODE

Stop mode

This parameter MANULST STR specifies the P(Manual MANULST CPUUSAGETS mode used to stop Enumeratio stop), P, T(Mandatory) the CPU usage n Type AUTOSTP( AUTOSTP test. Automatic stop) This parameter D0, D8, SET specifies the DL D16, D32, USERMBR(Opt maximum bit rate Enumeratio D64, D128, ional) of streaming for n Type D144, PS domain user. D256, D384 D0, D8, D16, D32, D64, D128, D144, D256, D384

Downlink maximum bit StreamDlMB rate of R Streaming

8/7/2013

华为机密,未经许可不得扩散

第906页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Streaming ADD Enhanced STREAMGB MAC-c flow CELLEFACH( CELL_FACH R GBR Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends streaming service data on the Iub interface. This parameter specifies the rate threshold of 2ms TTI on the EDCH for HSUPA streaming service. When the cell capability and UE Rate threshold capability allows StreamHsupa of Streaming SET 2ms TTI, 2ms 2msTtiRateT on 2ms TTI of FRC(Optional) TTI on the Ehs HSUPA DCH is used if the PS streaming service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used.

文档密级:

Interval Type

1~1000

1~1000

D8, D16, D32, D64, D128, 8,16,32,64,1 Enumeratio D144, 28,144,256, n Type D256, 384,608 D384, D608

8/7/2013

华为机密,未经许可不得扩散

第907页,共3267页

162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Interval CELLEFACH( CELL_FACH Type Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends streaming service data on the Iub interface.

文档密级:

Streaming STREAMMB MAC-c flow R MBR

1~2000

1~2000

Uplink maximum bit StreamUlMB rate of R Streaming

This parameter D0, D8, SET specifies the UL D16, D32, USERMBR(Opt maximum bit rate Enumeratio D64, D128, ional) of streaming for n Type D144, PS domain user. D256, D384 ADD SCCPCHBASI C(Optional) ADD AICH(Optional) ADD PICH(Optional) ADD CELLMBMSS CCPCH(Option al) SET MBMSSCCPC

D0, D8, D16, D32, D64, D128, D144, D256, D384

STTDInd

STTD indicator

This parameter indicates whether the SCCPCH uses STTD or not. For TRUE, detailed Enumeratio FALSE information of n Type this parameter, refer to 3GPP 25.346.

TRUE, FALSE

8/7/2013

华为机密,未经许可不得扩散

第908页,共3267页

162734118.xls.ms_office1

文档密级:

ADD CELLSETUP(O STTD support ptional) STTDSupInd indicator ADD NRNCCELL(O ptional)

This parameter indicates whether STTD_Sup STTD_Sup STTD TX Enumeratio ported, ported, diversity is n Type STTD_not_ STTD_not_ supported. Supported Supported

This parameter specifies the logical serial number of a subflow for the typical RAB. A bearer may use several subflows for transmission. For example, AMR speech service may use three traffic ADD subflows, which TYPRABOLPC correspond to Service (Mandatory) three transport Interval SubflowIndex subflow index ADD channels. Type TYPRABRLC( Subflows 0, 1, Mandatory) and 2 carry bit flows of classes A, B, and C respectively. For other types of RABs, there is only one subflow. Therefore, the traffic subflow index is set to 0, which corresponds to one transport channel.

0~2

0~2

8/7/2013

华为机密,未经许可不得扩散

第909页,共3267页

162734118.xls.ms_office1

文档密级:

ADD Max subframe Max subframe SUBFRAME IPPATH(Option length length. LEN al)

Interval Type

16~1023

16~1023

SUBNET

Subnet No.

This parameter specifies the SET subnet number of Interval SUBNET(Mand the internal IP Type atory) address of the RNC.

1 to 1~126,128~ 126,128 to 191 191

Indicating ADD whether the cell SupBmc CBS support QUICKCELLS supports the CBS ETUP(Optional) service. This parameter specifies whether the NodeB allows setting of the downlink DPCH spreading factor Support ADD to 512. If this SuppDlSf512 downlink NODEBLMTP parameter is set to DPCH SF 512 ARA(Optional) TRUE, the NodeB allows setting of the downlink DPCH spreading factor to 512.

TRUE, Enumeratio FALSE n Type

TRUE, FALSE

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

This parameter indicates whether Support DPC ADD to support the FALSE, SuppDpcmod mode Change NRNCCELL(O Enumeratio mode change of TRUE eChgFlag ind ptional) n Type downlink power control (DPC).

FALSE,TR UE

8/7/2013

华为机密,未经许可不得扩散

第910页,共3267页

162734118.xls.ms_office1
This parameter specifies whether the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always SINGLE. Indicating whether to support establishing IURCCH between the RNC and the neighboring This parameter specifies the board is support backupclock source of the output clock.

文档密级:

Support DPC ADD SuppDpcTripl mode NODEBLMTP et TRIPLET ARA(Optional)

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

SuppIurCch

IUR CCH support flag

ADD NRNC(Optional )

Enumeratio NO, YES n Type

NO, YES

Is support SUPPORTB back clock AKCLKSRC source

SET CLK(Optional)

NO(NO), Enumeratio YES(YES) n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第911页,共3267页

162734118.xls.ms_office1

文档密级:

CR support SupportCRTy type pe

CR527_SU PPORT, CR527_NO T_SUPPOR T, CR528_SU ADD CR supported by PPORT, CNNODE(Opti CN protocol Enumeratio CR528_NO onal) version. n Type T_SUPPOR T, CR529_SU PPORT, CR529_NO T_SUPPOR T

CR527_SU PPORT, CR527_NO T_SUPPOR T, CR528_SU PPORT, CR528_NO T_SUPPOR T, CR529_SU PPORT, CR529_NO T_SUPPOR T

Identifying whether the interRAT cell supports PS HO. TRUE indicates that the interInter-RAT cell ADD RAT cell is able SuppPSHOFl support PS HO GSMCELL(Opt to perform the ag indicator ional) handover procedure with relocation. FALSE indicates that the cell is unable to do so. This parameter specifies whether Support PS ADD the NodeB SuppPsRtSer realtime traffic NODEBLMTP supports PS realvOnHsdpa on HSDPA ARA(Optional) time services being carried on HSDPA.

FALSE, Enumeratio TRUE n Type

FALSE,TR UE

FALSE, Enumeratio TRUE n Type

FALSE, TRUE

8/7/2013

华为机密,未经许可不得扩散

第912页,共3267页

162734118.xls.ms_office1
Identifying whether the interRAT cell supports RIM. (RIM is used to Inter-RAT cell ADD obtain the SI/PSI FALSE, support RIM GSMCELL(Opt information of the Enumeratio SuppRIMFlag TRUE indicator ional) inter-RAT cell.) n Type For the details of RIM process, refer to the 3GPP TS 25.901 protocol.

文档密级:

FALSE,TR UE

SW

Switch

This parameter SET CLOSE(Clo specifies whether ALMPORT(Opt Enumeratio se), CLOSE,OP to open or close ional) n Type OPEN(Ope EN the port. n)

SWEEK

Start week

SUN(Sunda y), MON(Mon day), TUE(Tuesd This parameter ay), SET specifies the DST Enumeratio WED(Wedn TZ(Mandatory) start day in a n Type esday), week. THU(Thurs day), FRI(Friday) , SAT(Saturd ay)

SUN, MON, TUE, WED, THU, FRI, SAT

Switch

Port switch

SET This parameter Close, SCUPORT(Ma specifies the state Enumeratio Open ndatory) of the port switch. n Type SET BFDPROTOS W(Mandatory)

Close,Open

SWITCH

Bfd Protocol Switch

This parameter specifies whether BFD_OFF, Enumeratio BFD_OFF, to turn on the BFD_ON n Type BFD_ON BFD protocol switch.

8/7/2013

华为机密,未经许可不得扩散

第913页,共3267页

162734118.xls.ms_office1

文档密级:

Whether to support Switch3GPP2541 ADD 5CR0125 Switch3GPP2 Switch3GPP25 CNNODE(Opti Enumeratio OFF, ON function.It is 5415CR0125 415CR0125 onal) n Type valid only if the Iu interface is CS domain.

OFF,ON

Switch SWITCHBA primary IP CKFLAG address flag

This field indicate whether ADD switch back if the SCTPLNK(Opti Enumeratio NO, YES primary IP onal) n Type address is available. This field indicates the association will ADD switch back to Interval SCTPLNK(Opti primary IP Type onal) address after receiving appointed number of HBACK.

NO, YES

Switch back SWITCHBA HB number CKHBNUM

1~254

1~254

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter1. ter1 er1 ITCH(Optional) n Type

OFF ON

8/7/2013

华为机密,未经许可不得扩散

第914页,共3267页

162734118.xls.ms_office1

文档密级:

SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter10. Type ter10 er10 ITCH(Optional)

0~4294967 0~4294967 29 29

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter2. ter2 er2 ITCH(Optional) n Type

OFF ON

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter3. ter3 er3 ITCH(Optional) n Type

OFF ON

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter4. ter4 er4 ITCH(Optional) n Type

OFF ON

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter5. ter5 er5 ITCH(Optional) n Type

OFF ON

SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter6. ter6 er6 ITCH(Optional) n Type

OFF ON

8/7/2013

华为机密,未经许可不得扩散

第915页,共3267页

162734118.xls.ms_office1

文档密级:

SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter7. Type ter7 er7 ITCH(Optional)

0~4294967 0~4294967 29 29

SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter8. Type ter8 er8 ITCH(Optional)

0~4294967 0~4294967 29 29

SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter9. Type ter9 er9 ITCH(Optional)

0~4294967 0~4294967 29 29

SWSEQ

Start week sequence

FIRST(First ), This parameter SECOND(S SET specifies the DST econd), Enumeratio TZ(Mandatory) start week in a THIRD(Thi n Type month. rd), FOURTH(F ourth), LAST(Last)

FIRST, SECOND, THIRD, FOURTH, LAST

AMR_RRC Number per SysAmrRrcN Second for um System

When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for system.

1~500

1~500

8/7/2013

华为机密,未经许可不得扩散

第916页,共3267页

162734118.xls.ms_office1

文档密级:

Contact mode SET SYSCONTA of the SYS(Optional) CT manufacturer

This parameter specifies the String Type method to contact the manufacturer.

1~250 character

SYSDESC

System description

HiPri_RRC Number per SysHighPriRr Second for cNum System

This parameter specifies the SET String Type system SYS(Optional) description of the RNC production. When call shock control starts, the register and 3GSET Interval >2G reselect CALLSHOCKC 1~500 Type number can be TRL(Optional) accessed per second for system. A timer to RNC wait for PS SET RESUME after STATETIMER( successful CS Optional) InterRAT handover. SET SYS(Optional) This parameter specifies the location of the RNC product. This parameter specifies the system ID of the RNC product.

1~250 character

1~500

PS resume SysHoPsResu timer after meTmr SYSHO

Interval Type

1~255

1~255

System SYSLOCATI Location ON

String Type -

1~250 character

SYSOBJECT System ID ID Max RRC_REJ SysRrcRejNu Number per m Second for System

SET SYS(Optional)

String Type -

1~250 character

When call shock SET control starts, it is Interval CALLSHOCKC the max number Type TRL(Optional) of RRC_REJ message.

1~500

1~500

System SYSSERVIC services ES

SET SYS(Optional)

This parameter specifies the services provided String Type by the RNC product.

1~250 character

8/7/2013

华为机密,未经许可不得扩散

第917页,共3267页

162734118.xls.ms_office1
When the RRC REQ total number of one system reach this threshold in period and can't been shared out to other SPU system, the RRC flow control will be triggered. New RRC REQ will be rejected or discarded. Signalling route set test timer. When the reception of a TFP causes unavailability of a route, this timer is started to regularly check whether the route is recovered. Uninhibit acknowledgement timer. It is a protection timer waiting for an uninhibit acknowledgement message (LUA) from the peer end after an uninhibit message (LUN) is sent to the peer end.

文档密级:

System Call SET SysTotalRrcN Shock Trigger CALLSHOCKC umThd Threshold TRL(Optional)

Interval Type

1~500

1~500

T10TMR

Signalling route set test timer

SET MTP3TMR(Opt ional)

Interval Type

30000~600 30000~600 00 00

T12TMR

Uninhibit ACK timer

SET MTP3TMR(Opt ional)

Interval Type

800~1500

800~1500

T13TMR

Force uninhibit timer. It is a protection timer waiting for a force uninhibit SET Force acknowledgement Interval MTP3TMR(Opt uninhibit timer message (LUA) Type ional) from the peer end after a force uninhibit message (LFU) is sent to the peer end.

800~1500

800~1500

8/7/2013

华为机密,未经许可不得扩散

第918页,共3267页

162734118.xls.ms_office1
Inhibition acknowledgement timer. It is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an inhibition message (LIN) is sent to the peer end. Link realignment timer. This timer is started when a link fails to be started. The restart of the link is initiated after it expires. Time-control changeover timer. When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires to avoid disorder of data. Local inhibit test timer. After a local link is inhibited, this timer is started to regularly check the management states at both ends of the link. Remote inhibit test timer. After a remote link is inhibited, this timer is started to regularly check the management states at both ends of the link.

文档密级:

T14TMR

Inhibition ACK timer

SET MTP3TMR(Opt ional)

Interval Type

2000~3000 2000~3000

T17TMR

Link realignment timer

SET MTP3TMR(Opt ional)

Interval Type

800~1500

800~1500

T1TMR

Time-control changeover timer

SET MTP3TMR(Opt ional)

Interval Type

800~1200

800~1200

T22TMR

Local inhibit test timer

SET MTP3TMR(Opt ional)

Interval Type

180000~36 180000~36 0000 0000

T23TMR

SET Remote inhibit MTP3TMR(Opt test timer ional)

Interval Type

180000~36 180000~36 0000 0000

8/7/2013

华为机密,未经许可不得扩散

第919页,共3267页

162734118.xls.ms_office1
Changeover acknowledgement timer. It is a protection timer waiting for an extended SET changeover MTP3TMR(Opt acknowledgement ional) message (XCA) from the peer end after an extended changeover order message (XCO) is sent to the peer end. T300 is started when UE sends the RRC CONNECTION REQUEST message. It is stopped when UE receives the RRC SET CONNECTION IDLEMODETI SETUP message. MER(Optional) RRC CONNECTION REQUEST will be resent upon the expiry of the timer if V300 is lower than or equal to N300, else enter idle

文档密级:

T2TMR

Changeover ACK timer

Interval Type

1400~2000 1400~2000

T300

Timer 300

D100, D200, D400, D600, D800, D1000, D1200, Enumeratio D1400, n Type D1600, D1800, D2000, D3000, D4000, D6000, D8000

D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000

8/7/2013

华为机密,未经许可不得扩散

第920页,共3267页

162734118.xls.ms_office1

文档密级:

T302

Timer 302

T302 is started after the UE transmits the CELL UPDATE/URA UPDATE D100, message and D200, stopped after the D400, UE receives the D600, CELL UPDATE D800, CONFIRM/URA D1000, SET UPDATE D1200, CONNMODET CONFIRM Enumeratio D1400, IMER(Optional) message. CELL n Type D1600, UPDATE/URA D1800, UPDATE will be D2000, resent upon the D3000, expiry of the D4000, timer if V302 less D6000, than or equal to D8000 N302; otherwise, the UE will enter idle mode. Protocol default value is 4000.

D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000

8/7/2013

华为机密,未经许可不得扩散

第921页,共3267页

162734118.xls.ms_office1
T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the UE receives the UE CAPABILITY INFORMATION CONFIRM message. UE CAPABILITY INFORMATION will be resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will be initiated. Protocol default value is T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH, URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted upon the expiry of this timer if T307 is not activated and the UE detects "in service area"; otherwise, T307 will be started. Protocol default value is 30. "Infinity" means the cell will not be updated.

文档密级:

T304

Timer 304

SET CONNMODET IMER(Optional)

D100, D200, Enumeratio D400, n Type D1000, D2000

D100, D200, D400, D1000, D2000

T305

Timer 305

SET CONNMODET IMER(Optional)

INFINITY, D5, D10, Enumeratio D30, D60, n Type D120, D360, D720

INFINITY, D5, D10, D30, D60, D120, D360, D720

8/7/2013

华为机密,未经许可不得扩散

第922页,共3267页

162734118.xls.ms_office1
T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon expiry.Protocol default value is 30. T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode. Protocol default value is T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. Protocol default value is 5.

文档密级:

T307

Timer 307

SET CONNMODET IMER(Optional)

D5, D10, D15, D20, Enumeratio D30, D40, n Type D50

D5, D10, D15, D20, D30, D40, D50

T308

Timer 308

SET CONNMODET IMER(Optional)

D40, D80, D40, D80, Enumeratio D160, D320 D160, D320 n Type

T309

Timer 309

SET CONNMODET IMER(Optional)

Interval Type

1~8

1~8

8/7/2013

华为机密,未经许可不得扩散

第923页,共3267页

162734118.xls.ms_office1

文档密级:

T312

Timer 312

SET CONNMODET IMER(Optional) SET IDLEMODETI MER(Optional)

T312 is started after the UE starts to establish a DCH and stopped when the UE detects consecutive N312 Interval "in sync" Type indications from L1. It indicates physical channel setup failure upon the expiry of the timer. Protocol default value is 1.

1~15

1~15

T313

Timer 313

T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is SET stopped after the Interval CONNMODET UE detects Type IMER(Optional) consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL) failure upon expiry. Protocol default value is 3.

0~15

1~15

8/7/2013

华为机密,未经许可不得扩散

第924页,共3267页

162734118.xls.ms_office1
T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs) associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. Protocol default value is 12. D0, D2, SET In case of the RL D4, D6, D8, CONNMODET Enumeratio failure when the D12, D16, IMER(Optional) n Type UE is in D20 CELL_DCH state, If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T314 (or T315), CELL UPDATE will be resent for RL

文档密级:

T314

Timer 314

D0, D2, D4, D6, D8, D12, D16, D20

8/7/2013

华为机密,未经许可不得扩散

第925页,共3267页

162734118.xls.ms_office1
T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. Protocol default value is 180. D0, D10, In case of the RL D30, D60, SET failure when the D180, CONNMODET Enumeratio UE is in D600, IMER(Optional) n Type CELL_DCH D1200, state, T315 (or D1800 T314) is started and CELL UPDATE is sent. If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T315 (or T314), CELL UPDATE

文档密级:

T315

Timer 315

D0, D10, D30, D60, D180, D600, D1200, D1800

8/7/2013

华为机密,未经许可不得扩散

第926页,共3267页

162734118.xls.ms_office1
T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is stopped after the UE detects "in service area".The cell update procedure will be D0, D10, SET initiated upon the D20, D30, CONNMODET expiry of the Enumeratio D40, D50, IMER(Optional) timer if "in n Type INFINITY service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state and initiate cell update procedure when the UE detects "in service area". Protocol default

文档密级:

T316

Timer 316

D0, D10, D20, D30, D40, D50, INFINITY

T3212

Periodical location update is implemented by MS through the location update Periodical ADD procedure. 0: The Interval location update CNDOMAIN(O periodical update Type timer ptional) procedure is not used. This parameter is valid only when [CN domain ID] is set as CS_DOMAIN.

0~255

0~1530 step:6

8/7/2013

华为机密,未经许可不得扩散

第927页,共3267页

162734118.xls.ms_office1
T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPLETE"(or the response of SET "ELL UPDATE CONNMODET CONFIRM") and IMER(Optional) V381 is smaller than N381, RNC resend "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC receive "RRC CONNECTION SETUP COMPLETE"(or the response of Time-control changeback timer. When a normal changeback cannot be SET initiated, services MTP3TMR(Opt will be changed ional) back to a normal link only after this timer expires to avoid disorder of data.

文档密级:

T381

Timer 381

D0, D100, D200, D300, D400, D500, D600, Enumeratio D700, n Type D800, D900, D1000, D1200, D1500, D2000

D0,D100, D200,D300, D400,D500, D600,D700, D800, D900,D100 0,D1200,D1 500,D2000

T3TMR

Time-control changeback timer

Interval Type

800~1200

800~1200

8/7/2013

华为机密,未经许可不得扩散

第928页,共3267页

162734118.xls.ms_office1
Changeover acknowledgement first attempt timer. It is a protection timer waiting for a Changeover SET changeback ACK first MTP3TMR(Opt acknowledgement attempt timer ional) message (CBA) from the peer end after the first changeback declaration (CBD) is sent to Changeover acknowledgement second attempt timer. It is a protection timer waiting for a Changeover SET changeback ACK second MTP3TMR(Opt acknowledgement attempt timer ional) message from the peer end after the second changeback declaration (CBD) is sent to the peer end. Transmission prohibited inhibition timer. This timer is activated when a Transmission SET transmission prohibited MTP3TMR(Opt prohibited inhibition timer ional) message (TFP) is sent. The TFP will not be sent any more during the running of this timer.

文档密级:

T4TMR

Interval Type

800~1200

800~1200

T5TMR

Interval Type

800~1200

800~1200

T8TMR

Interval Type

800~1200

800~1200

8/7/2013

华为机密,未经许可不得扩散

第929页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the target number of the RLC retransmissions. In the link quality adjust algorithm SET for E-FACH, Target RLC RACHMEASU When the Interval TagetRlcRetr Retransmission REPARA(Optio measured Type ans rate nal) retransmissions are higher than the target number, Ec/N0 should be decreased. Otherwise, Ec/N0 should be increased. Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-

1~1000

0.1%~100% , step: 0.1%

Inter-freq CS target TargetFreqCs frequency ThdEcN0 trigger Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第930页,共3267页

162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-

文档密级:

Inter-freq CS target TargetFreqCs frequency ThdRscp trigger RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第931页,共3267页

162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-

文档密级:

Inter-freq H target TargetFreqH frequency ThdEcN0 trigger Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第932页,共3267页

162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-

文档密级:

Inter-freq H target TargetFreqH frequency ThdRscp trigger RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第933页,共3267页

162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency measure report Interval mode] is set to Type EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this

文档密级:

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op PS target tional) TargetFreqR9 frequency SET 9PsThdEcN0 trigger Ec/No INTERFREQH THD OCOV(Optional )

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第934页,共3267页

162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency measure report Interval mode] is set to Type EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this

文档密级:

ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op PS target tional) TargetFreqR9 frequency SET 9PsThdRscp trigger RSCP INTERFREQH THD OCOV(Optional )

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第935页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG ER, this parameter is used Interval to set the Type measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the

文档密级:

ADD CELLINTERR Inter-RAT CS ATHOCOV(Op TargetRatCsT handover tional) hd decision THD SET INTERRATHO COV(Optional)

0~63

lower than 110,-110~48(1:-110; 2:-109; ...; 63:-48 )

8/7/2013

华为机密,未经许可不得扩散

第936页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with HSDPA services. For PS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG ER, this parameter is used Interval to set the Type measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the

文档密级:

ADD CELLINTERR Inter-RAT H ATHOCOV(Op TargetRatHT handover tional) hd decision THD SET INTERRATHO COV(Optional)

0~63

lower than 110,-110~48(1:-110; 2:-109; ...; 63:-48 )

8/7/2013

华为机密,未经许可不得扩散

第937页,共3267页

162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain nonHSDPA services. For PS domain non-HSDPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be

文档密级:

ADD CELLINTERR Inter-RAT ATHOCOV(Op R99 PS TargetRatR99 tional) handover PsThd SET decision THD INTERRATHO COV(Optional)

0~63

lower than 110,-110~48(1:-110; 2:-109; ...; 63:-48 )

8/7/2013

华为机密,未经许可不得扩散

第938页,共3267页

162734118.xls.ms_office1
This parameter specifies the segment number. Segment 1: basic device information Segment 2: connection information Segment 3: module information Segment 4: configuration information EXP Output Segment 5: peer TB DEVFILE(Opti Segment No. device onal) information Segment 6: host version information Segment 7: cabinet information Segment 8: subrack information Segment 9: board and Flash electronic label information Segment 10: slot This parameter specifies the Configured SET number of TBS Count for HSSCCHLESS TbIndexNum transport blocks HS-SCCH OPPARA(Optio in HS-SCCH Less Mode nal) Less Operation mode.

文档密级:

Interval Type

1~12

1~12

D0, D1, Enumeratio 0, 1, 2, 3, 4 D2, D3, D4 n Type

8/7/2013

华为机密,未经许可不得扩散

第939页,共3267页

162734118.xls.ms_office1
This parameter defines the number of the transport blocks corresponding to the TF 1, each transport block size is defined by RLCSize. The parameter value should not be 0 if there is only one TF. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport blocks corresponding to the TF 2, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport blocks corresponding to the TF 3, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302.

文档密级:

ADD FACHDYNTFS (Optional) ADD TB number of TbNumber1 PCHDYNTFS( TF1 Optional) ADD RACHDYNTF S(Optional)

Interval Type

0~512

0~512

ADD FACHDYNTFS (Optional) ADD TB number of TbNumber2 PCHDYNTFS( TF2 Optional) ADD RACHDYNTF S(Optional)

Interval Type

0~512

0~512

TbNumber3

ADD TB number of FACHDYNTFS TF3 (Optional)

Interval Type

0~512

0~512

8/7/2013

华为机密,未经许可不得扩散

第940页,共3267页

162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex1 1 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,

文档密级:

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90

8/7/2013

华为机密,未经许可不得扩散

第941页,共3267页

162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex2 2 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,

文档密级:

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90

8/7/2013

华为机密,未经许可不得扩散

第942页,共3267页

162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex3 3 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,

文档密级:

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90

8/7/2013

华为机密,未经许可不得扩散

第943页,共3267页

162734118.xls.ms_office1
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 SET 185~5 197~6 TB Size Index HSSCCHLESS 209~7 221~8 TbSizeIndex4 4 OPPARA(Optio 233~9 245~10 nal) 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 Used for the MTP3-B to test a link. If the test is successful, the tested link can be used to bear signalling. If failed, the MTP3ADD B periodically TC Test code MTP3LNK(Opt sends a location ional) command until the test is successful. When the link is deleted or deactivated, the MTP3-B stops sending the location command. D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, Enumeratio D35, D36, n Type D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66,

文档密级:

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90

Interval Type

1~254

1~254

8/7/2013

华为机密,未经许可不得扩散

第944页,共3267页

162734118.xls.ms_office1
Difference between the System Frame Number (SFN) and NodeB Frame CHIP0, CHIP0, Number (BFN) of CHIP256, CHIP256, ADD the NodeB which CHIP512, CHIP512, CELLSETUP( the cell belongs CHIP768, CHIP768, Mandatory) to. It is CHIP1024, CHIP1024, ADD Enumeratio recommended CHIP1280, CHIP1280, QUICKCELLS that Tcell of n Type CHIP1536, CHIP1536, ETUP(Mandato difference cells CHIP1792, CHIP1792, ry) under one NodeB CHIP2048, CHIP2048, should be unique. CHIP2304 CHIP2304 For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

TCell

Time offset

TCellId

Target cell ID

HO Uniquely Interval CELL(Optional) identifying a cell. Type

0~65535

0~65535

TCLEN

Test code length

Length of the test ADD code transmitted Interval MTP3LNK(Opt by the signalling Type ional) link.

1~15

1~15

TCRmax

Maximum duration of cell NOT_USE reselection. This D, D30(30 parameter, along seconds), with the [Max D60(60 Time for ADD number of cell seconds), evaluating max CELLHCS(Opti Enumeratio reselection], is D120(120 cell reselection onal) n Type used for rate seconds), evaluation in D180(180 HCS. For details, seconds), refer to 3GPP TS D240(240 25.304. seconds)

NOT_USE D, 30, 60, 120, 180, 240

8/7/2013

华为机密,未经许可不得扩散

第945页,共3267页

162734118.xls.ms_office1

文档密级:

NOT_USE D, D10(10 seconds), Time before D20(20 reverting to lowseconds), mobility D30(30 Time before ADD measurement. For seconds), TCrmaxHyst revert to low- CELLHCS(Opti detailed Enumeratio D40(40 mobility meas onal) information of n Type seconds), this parameter, D50(50 refer to 3GPP TS seconds), 25.304. D60(60 seconds), D70(70 seconds) Hysterisis time before non-HCS resuming slow movement. When UE is in highspeed movement, if the number of Non-HCS ADD cell reselections Tcrmaxhystno TCR max CELLSELRES is less than nhcs hysteresis EL(Optional) Ncrnonhcs, the UE resumes to slow movement. For detailed inforamtion, refer to 3GPP TS 25.304. Maximum duration of nonHCS cell reselection. If the number of cell reselection exceed the value ADD of this parameter Non-HCS max Tcrmaxnonhc CELLSELRES during TCR s EL(Optional) Tcrmaxnonhcs, the UE is not in high-speed movement. For detailed inforamtion, refer to 3GPP TS 25.304.

NOT_USE D, 10, 20, 30, 40, 50, 60, 70

NotUsed, D10(10 seconds), D20(20 seconds), D30(30 seconds), Enumeratio D40(40 n Type seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)

NotUsed, 10, 20, 30, 40, 50, 60, 70

NotUsed, D30(30 seconds), D60(60 seconds), Enumeratio D120(120 n Type seconds), D180(180 seconds), D240(240 seconds)

NotUsed, 30, 60, 120, 180, 240

8/7/2013

华为机密,未经许可不得扩散

第946页,共3267页

162734118.xls.ms_office1

文档密级:

Period of UE TCycleSlow slow speed decision

Cycle timer for deciding whether the UE is in lowmobility state. This timer provides the time for the RNC to ADD decide whether CELLHCSHO( the UE is in lowOptional) mobility state. Interval SET The smaller the Type HCSHO(Option value is, the more al) frequently the state estimation is triggered. If the parameter is set to 0, it is an indication that the state estimation is not triggered.

0~255

0~255

This parameter specifies whether ADD the alarm EMU(Optional) reporting for temperature is enabled. This parameter Upper Limit specifies the ADD TEMP_THD_ of Temperature upper threshold EMU(Optional) HIGH Alarm for temperature alarm. This parameter Lower Limit specifies the ADD TEMP_THD_ of Temperature lower threshold EMU(Optional) LOW Alarm for temperature alarm. Enable Temperature TEMP_MAS Alarm K Reporting

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n)

String Type -

1~9 character

String Type -

1~9 character

8/7/2013

华为机密,未经许可不得扩散

第947页,共3267页

162734118.xls.ms_office1

文档密级:

HCS Cell TempOffset1 Reselect TempOffset1

ADD INTRAFREQN CELL(Optional) ADD INTERFREQN CELL(Optional) ADD GSMNCELL(O ptional)

Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection. D3~0 D6~1 The larger the D9~2 value of the D12~3 parameter, the 3,6,9,12,15, Enumeratio D15~4 lower the 18,21,INFI n Type D18~5 probability of NITY D21~6 selecting INFINITY neighboring cells. The smaller the value of the parameter, the higher the probability of doing so.

8/7/2013

华为机密,未经许可不得扩散

第948页,共3267页

162734118.xls.ms_office1

文档密级:

HCS Cell TempOffset2 Reselect TempOffset2

ADD INTRAFREQN CELL(Optional) ADD INTERFREQN CELL(Optional)

Offset of cell CPICH Ec/No measurement value in cell selection or reselection. The larger the D2~0 D3~1 value of the D4~2 D6~3 parameter, the D8~4 2,3,4,6,8,10, lower the Enumeratio D10~5 12,INFINIT probability of n Type D12~6 Y selecting INFINITY neighboring cells. The smaller the value the parameter, the higher the probability of doing so.

This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR ADD service is set to CELLQUALIT TEN_MSEC. The AMR Event E YMEAS(Option DL code TX Interval TenMsecFor Reporting al) power is reported Type AmrE Period In 10ms SET periodically after QUALITYME the event Ea is AS(Optional) reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms.

1~6000

10~60000, step: 10

8/7/2013

华为机密,未经许可不得扩散

第949页,共3267页

162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. This parameter is valid when the corresponding parameter related to the reporting period unit for the event F of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms.

文档密级:

ADD CELLQUALIT BE Event E YMEAS(Option TenMsecFor Reporting al) BeE Period In 10ms SET QUALITYME AS(Optional)

Interval Type

1~6000

10~60000, step: 10

ADD CELLQUALIT BE Event F YMEAS(Option TenMsecFor Reporting al) BeF Period In 10ms SET QUALITYME AS(Optional)

Interval Type

1~6000

10~60000, step: 10

8/7/2013

华为机密,未经许可不得扩散

第950页,共3267页

162734118.xls.ms_office1

文档密级:

DL basic common SET measurement LDM(Mandator report cycle. For DL basic meas y) Interval TenMsecFor detailed rprt cycle SET Type DlBasicMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

Measurement report period of SET event E triggered LDM(Mandator by DL OLC. For DL OLC meas y) Interval TenMsecFor detailed rprt cycle SET Type DlOlcMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

This parameter specifies the SET HSDPA bit rate LDM(Mandator measurement TenMsecFor HSDPA bit y) report period. For Interval HsdpaPrvidR rate meas cycle SET detailed Type ateMeas SATLDM(Man information of datory) this parameter, refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

8/7/2013

华为机密,未经许可不得扩散

第951页,共3267页

162734118.xls.ms_office1

文档密级:

HSDPA power requirement SET measurement LDM(Mandator report period For TenMsecFor HSDPA need y) Interval detailed HsdpaPwrMe pwr meas cycle SET Type information of as SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

This parameter specifies the HSUPA bit rate measurement SET TenMsecFor HSUPA bit report period. For Interval LDM(Mandator HsupaPrvidR rate meas cycle detailed Type y) ateMeas information of this parameter, refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

8/7/2013

华为机密,未经许可不得扩散

第952页,共3267页

162734118.xls.ms_office1

文档密级:

Value range: 1~6000 Physical value range: 10 to 60000, step: 10 Physical unit: ms SET Content: UL basic LDM(Mandator common UL basic meas y) Interval TenMsecFor measurement rprt cycle SET Type UlBasicMeas report cycle. For SATLDM(Man detailed datory) information of this parameter, refer to 3GPP TS 25.433. Recommended value: 20

1~6000

10~60000, step:10

Measurement report period of SET event E triggered LDM(Mandator by UL OLC. For UL OLC meas y) Interval TenMsecFor detailed rprt cycle SET Type UlOlcMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.

1~6000

10~60000, step:10

8/7/2013

华为机密,未经许可不得扩散

第953页,共3267页

162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Time window for estimating whether the UE is in high-mobility state. The start point of the estimation is the moment of the last reporting of event 1D, and the backdated time length is determined by this parameter. If the parameter is set to 0, the RNC does not decide whether the UE is in high-mobility state.

文档密级:

ADD CELLQUALIT VP Event E YMEAS(Option TenMsecFor Reporting al) VpE Period In 10ms SET QUALITYME AS(Optional)

Interval Type

1~6000

10~60000, step: 10

ADD CELLHCSHO( Time window Optional) TFastSpdEst for UE fast SET speed decision HCSHO(Option al)

Interval Type

0~511

0~511

8/7/2013

华为机密,未经许可不得扩散

第954页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter indicates whether the SCCPCH involves the TFCI. When the downlink blind transport format detection function is used, the TFCI ADD is unavailable. EXISTS, EXISTS, TFCI existing SCCPCHBASI For detailed Enumeratio NOT_EXIS NOT_EXIS TFCIpresence indicator C(Mandatory) information of n Type TS TS this parameter, refer to 3GPP TS 25.433. Note: This parameter is configured only for the SCCPCH in the formats 8 to 17. ADD FACHDYNTFS (Mandatory) ADD PCHDYNTFS( Mandatory) ADD RACHDYNTF S(Mandatory) This parameter defines the number of the transport formats. For detailed Enumeratio D1, D2, D3 1,2,3 information of n Type this parameter, refer to 3GPP TS 25.302.

TFsNumber

Number of TFs

TG

Target BAM

ACTIVE(A SWP Select the target ctive BAMAREA(M BAM to switch Enumeratio BAM), ACTIVE,S andatory) over work area. n Type STANDBY TANDBY (Standby BAM) When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding ADD window. If the TYPRABQUA Interval number of faulty LITYMEAS(M Type CRCs exceeds the andatory) specified threshold, event 5A is triggered. The threshold is Event 5A Threshold.

Thd5A

Event 5A Threshold

1~512

1~512

8/7/2013

华为机密,未经许可不得扩散

第955页,共3267页

162734118.xls.ms_office1
If DL code TX power is higher than the Ea absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter specifies a relative threshold. Absolute Ea threshold = RL Max DL TX power - ThdEa. If DL code TX power is lower than the Eb absolute threshold, event Eb is triggered. When this event report is received, DL QoS operation is stopped. This parameter specifies a relative threshold. Absolute Eb threshold = RL Max DL TX

文档密级:

ThdEa

Event Ea Relative Threshold

ADD TYPRABQUA LITYMEAS(M andatory)

Interval Type

0~56

0~28, step: 0.5

ThdEb

Event Eb Relative Threshold

ADD TYPRABQUA LITYMEAS(M andatory)

Interval Type

0~56

0~28, step: 0.5

8/7/2013

华为机密,未经许可不得扩散

第956页,共3267页

162734118.xls.ms_office1

文档密级:

THP

Traffic Handling Priority

This parameter specifies the Traffic Handling Priority (THP) of each traffic class SET carried on the SCHEDULEPR logical channel. Interval IOMAP(Mandat The value 1 Type ory) means the highest priority, the value 14 means the lowest priority, and the value 15 means no priority.

1~15

1~15

This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP10Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 10 l) traffic handling priority 10. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP11Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 11 l) traffic handling priority 11. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP12Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 12 l) traffic handling priority 12. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP13Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 13 l) traffic handling priority 13.

High, Medium, Low

High, Medium, Low

High, Medium, Low

High, Medium, Low

8/7/2013

华为机密,未经许可不得扩散

第957页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP14Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 14 l) traffic handling priority 14. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP15Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 15 l) traffic handling priority 15. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 1 l) traffic handling priority 1. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 2 l) traffic handling priority 2. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 3 l) traffic handling priority 3. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 4 l) traffic handling priority 4. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 5 l) traffic handling priority 5.

High, Medium, Low

High, Medium, Low

THP1Class

High, Medium, Low

THP2Class

High, Medium, Low

THP3Class

High, Medium, Low

THP4Class

High, Medium, Low

THP5Class

High, Medium, Low

8/7/2013

华为机密,未经许可不得扩散

第958页,共3267页

162734118.xls.ms_office1

文档密级:

THP6Class

This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 6 l) traffic handling priority 6. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 7 l) traffic handling priority 7. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 8 l) traffic handling priority 8. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 9 l) traffic handling priority 9.

High, Medium, Low

THP7Class

High, Medium, Low

THP8Class

High, Medium, Low

THP9Class

High, Medium, Low

8/7/2013

华为机密,未经许可不得扩散

第959页,共3267页

162734118.xls.ms_office1

文档密级:

THPClass

Traffic Handler Priority Class

This parameter specifies the Traffic Handling Priority (THP) SET class that the High, USERGBR(Ma THP priority is Enumeratio Medium, ndatory) mapped to. This n Type Low parameter is valid for only interactive services.

High, Medium, Low

TIMEOUT

Reply TimeOut

PING IP(Optional)

This parameter specifies the timeout duration of a sent ping packet.

Interval Type

200~10000

200 to 10000

TIMEOUT

Time Out

PING MAC(Optional) TRC MAC(Optional)

This parameter specifies the time Interval duration of the Type packet.

1~3

1 to 3

Timer

Block time

Specifying the time limitation for BLK blocking a cell Interval CELL(Mandato when normal Type ry) priority is selected.

1~3600

1~3600

8/7/2013

华为机密,未经许可不得扩散

第960页,共3267页

162734118.xls.ms_office1
Timer_CU timer. Step is 0.05. This ADD parameter will Interval AAL2PATH(O affect the Type ptional) efficiency and delay of AAL2 transmission. This parameter specifies the number of ping packets.

文档密级:

TIMERCU

Timer_CU timer

1~64

1~64

TIMES

Number of ping packets

PING IP(Optional)

Interval Type

1~1024

1 to 1024

ADD CELLINTERFR Inter-freq EQHOCOV(Op coverage tional) TimeToInterfr handover delay SET eqHO trig time INTERFREQH OCOV(Optional )

This parameter defines the length of the inter-freq coverage handover delay to trig. When the interfreq coverage handover priority of the reported inter-freq measure cells are lower than the highest priority of Interval the measure Type cells,start the inter-freq coverage handover delay timer. When the timer expiry or the priority of the reported cells are equal to the highest priority, start inter-freq handover.

0~1000

0~1000

8/7/2013

华为机密,未经许可不得扩散

第961页,共3267页

162734118.xls.ms_office1

文档密级:

This parameter specifies the delay time after the RLC entity is ADD Time to start established or Interval TimeToMonit TYPRABRLC( re-TX monitor reconfigured and Type er Optional) before the retransmission ratio monitoring is started.

0~500000

0~500000

2B event TimeToTrig2 trigger delay B time

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

Time delay to trigger event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of D0, D10, incorrect D20, D40, decision, but the D60, D80, slower the D100, response of event D120, 2B to the change D160, of measured Enumeratio D200, signals. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第962页,共3267页

162734118.xls.ms_office1
Time delay to trigger event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of D0, D10, incorrect D20, D40, decision, but the D60, D80, slower the D100, response of event D120, 2D to the change D160, of measured Enumeratio D200, signals. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the

文档密级:

2D event TimeToTrig2 trigger delay D time

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第963页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In

文档密级:

2F event TimeToTrig2 trigger delay F time

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional )

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第964页,共3267页

162734118.xls.ms_office1
Time delay for triggering handovers to GSM cells with non-verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM Interval cell is not Type verified, an interRAT handover is triggered. When the value of this parameter is 65535, the RNC does not perform inter-RAT handovers to nonverified GSM cells. The higher the time-to-trigger parameters are, the smaller the average number

文档密级:

ADD CELLINTERR ATHOCOV(Op tional) Time to SET trigger for nonTimeToTrigF INTERRATHO verified GSM orNonVerify COV(Optional) cell ADD CELLMBDRIN TERRAT(Optio nal)

0~64000,65 0~64000,65 535 535

8/7/2013

华为机密,未经许可不得扩散

第965页,共3267页

162734118.xls.ms_office1
Time delay for hard handover triggered by periodical reports. Only the interfrequency cell in which the signal quality meets the requirement in all periodical reports during the period of time specified by this parameter can be selected as the target cell in the interInterval frequency Type handover. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of the handover to the change of measured signals. Based on the existing emulation result,

文档密级:

HHO period TimeToTrigF trigger delay orPrdInterFre time q

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)

0~64000

0~64000

8/7/2013

华为机密,未经许可不得扩散

第966页,共3267页

162734118.xls.ms_office1
Time delay for triggering handovers to GSM cells with verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM cell is verified, an Interval inter-RAT Type handover is triggered. The inter-RAT handover conditions are as follows: Mother_RAT + CIO >= Tother_RAT + H/2 If the quality of the GSM neighboring cell meets the preceding

文档密级:

Time to trigger for TimeToTrigF verified GSM orVerify cell

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)

0~64000

0~64000

8/7/2013

华为机密,未经许可不得扩散

第967页,共3267页

162734118.xls.ms_office1

文档密级:

Time to TimetoTrigge trigger 4A r4A

This parameter specifies the time from the moment when the traffic volume of the DCH exceeds the upper threshold to D0, D10, the moment when D20, D40, the traffic-related D60, D80, event 4A on DCH D100, is triggered. This D120, parameter is used D160, to avoid D200, unnecessary D240, ADD reports triggered D320, TYPRABDCC by DCH traffic Enumeratio D640, CMC(Optional) volume n Type D1280, fluctuation. The D2560, larger the value of D5000, this parameter, D10000, the longer the D15000, required duration D20000, of the traffic D25000, volume exceeding D30000 the upper threshold, and the smaller the possibility of triggering trafficrelated event 4A on DCH.

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000

8/7/2013

华为机密,未经许可不得扩散

第968页,共3267页

162734118.xls.ms_office1

文档密级:

Time to TimetoTrigge trigger 4B r4B

This parameter specifies the time from the moment when the traffic volume on the DCH falls below the lower D0, D10, threshold to the D20, D40, moment when the D60, D80, traffic-related D100, event 4B is D120, triggered. This D160, parameter is set to D200, avoid unnecessary D240, ADD reports triggered D320, TYPRABDCC Enumeratio by DCH traffic D640, CMC(Optional) n Type fluctuation. The D1280, larger the value of D2560, this parameter, D5000, the longer the D10000, required duration D15000, of the traffic D20000, volume keeping D25000, below the lower D30000 threshold, and the smaller the possibility of triggering trafficrelated event 4B on DCH. This parameter specifies the number of consecutive periods during which the percentage of ADD retransmitted Interval TYPRABRLC( PDUs is higher Type Optional) than the threshold of event A before event A is triggered. Recommended value (default value): 2.

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000

Event A time TimeToTrigg to trigger erA

1~100

1~100

8/7/2013

华为机密,未经许可不得扩散

第969页,共3267页

162734118.xls.ms_office1

文档密级:

Event B time TimeToTrigg to trigger erB

This parameter specifies the number of consecutive periods during ADD which the Interval TYPRABRLC( percentage of Type Optional) retransmitted PDUs is lower than the threshold of event B before event B is triggered.

1~100

1~100

TMI

ADD TRMMAP ID TRMMAP(Man TRMMAP ID. datory)

Interval Type

9~163

9~163

TMIBRZ

Bronze user TRMMAP index

Index of the traffic mapping ADD used by the ADJMAP(Man current adjacent datory) node's bronze user.

Interval Type

0~163

0~163

TMIGLD

Gold user TRMMAP index

Index of the ADD traffic mapping Interval ADJMAP(Man used by the Type datory) current adjacent node's gold user.

0~163

0~163

8/7/2013

华为机密,未经许可不得扩散

第970页,共3267页

162734118.xls.ms_office1

文档密级:

TMISLV

Silver user TRMMAP index

Index of the ADD traffic mapping Interval ADJMAP(Man used by the Type datory) current adjacent node's silver user.

0~163

0~163

TMT1TMR

TMT2TMR

Signalling link test acknowledgement timer. It is a protection timer waiting for a SET signalling link Signalling link MTP3TMR(Opt test test ACK timer ional) acknowledgement message (SLTA) from the peer end after a signalling link test message (SLTM) is sent to the peer end. Signalling link repeat test timer. This timer is used Signalling link SET to send the repeat test MTP3TMR(Opt signalling link timer ional) test messages (SLTM) to the peer end regularly.

Interval Type

8000~1200 8000~1200 0 0

Interval Type

30000~900 30000~900 00 00

IUR TnlBearerTyp transmission e bearer type

ADD IUR trans bearer ATM_TRA ATM_TRA NRNC(Mandat Enumeratio type. NS, NS, ory) n Type IP_TRANS IP_TRANS

8/7/2013

华为机密,未经许可不得扩散

第971页,共3267页

162734118.xls.ms_office1

文档密级:

Iu transfers TnlBearerTyp bearer type e

ADD The transfers CNNODE(Opti bearer type of Iu onal) interface.

ATM_TRA ATM_TRA Enumeratio NS, NS, n Type IP_TRANS IP_TRANS

IUB trans TnlBearerTyp bearer type e

ATM_TRA NS(ATM circuit transmissio n), IP_TRANS( IP transmissio ADD n), Transport type of NODEB(Option Enumeratio ATMANDI the Iub interface. al) n Type P_TRANS( ATM and IP transmissio n), HYBRID_I P_TRANS( Hybrid IP transmissio n)

ATM_TRA NS, IP_TRANS, ATMANDI P_TRANS, HYBRID_I P_TRANS

8/7/2013

华为机密,未经许可不得扩散

第972页,共3267页

162734118.xls.ms_office1

文档密级:

TO

This parameter specifies the time SET Interval AdjustMethod offset of the DST TZ(Mandatory) Type from the normal time.

-120~1,1~120

-120 to -1, 1 to 120

ToAWE

ADD FACH(Mandato ry) ADD Time of PCH(Optional) arrival window ADD endpoint CELLMBMSF ACH(Optional) SET MBMSFACH( Optional)

ToAWS

ADD FACH(Mandato ry) ADD Time of PCH(Optional) arrival window ADD startpoint CELLMBMSF ACH(Optional) SET MBMSFACH( Optional)

A positive value relative to Latest Time of Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives before that time.For detailed information of this parameter, refer to 3GPP TS 25.402. A positive value relative to Time of arrival window endpoint (ToAWE). It indicates the startpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives after that time.For detailed information of this parameter, refer to 3GPP TS 25.402.

Interval Type

0~2559

0~2559

Interval Type

0~1279

0~1279

8/7/2013

华为机密,未经许可不得扩散

第973页,共3267页

162734118.xls.ms_office1

文档密级:

The cell will shut down automatically Cell Dynamic only when the ADD ShutDown total user number CELLDYNSHU Interval TotalUserNu Total User is not greater than TDOWN(Optio Type mThd number the threshold. The nal) Threshold total user number consists of the DCH and CCH user numbers.

0~5

0~5

TP

Log type

This parameter specifies the type of the FAM logs to be collected. "Normal" indicates the text logs collected in the \common\fam\fa mlog directory COL NORMAL, under the BAM FAMLOG(Man Enumeratio NORMAL, FORMAT installation datory) n Type FORMAT directory. "Format" indicates the binary FAM logs collected in the \common\fam\fa mlogfmt directory under the BAM installation directory.

8/7/2013

华为机密,未经许可不得扩散

第974页,共3267页

162734118.xls.ms_office1

文档密级:

TpenaltyHcs Reselect

ADD INTRAFREQN CELL(Optional) HCS Cell ADD Reselect INTERFREQN Penalty Timer CELL(Optional) ADD GSMNCELL(O ptional)

HCS cell reselection penalty timer. The larger the value of the D0, D10, parameter, the D20, D30, longer the HCS Enumeratio D40, D50, penalty time. The n Type D60 smaller the value of the parameter, the shorter the HCS penalty time.

0,10,20,30,4 0,50,60

TrafficClass

Traffic Class

TrafficClass

Traffic Class

This parameter specifies the CONVERS CONVERS traffic class. ATIONAL, ATIONAL, Based on Quality ADD STREAMI STREAMI of Service (QoS), TYPRABBASI there are four Enumeratio NG, NG, C(Mandatory) traffic classes: n Type INTERACT INTERACT IVE, IVE, conversational, BACKGRO BACKGRO streaming, UND UND interactive, and background. SET SCHEDULEPR IOMAP(Mandat ory) SET USERGBR(Ma This parameter specifies the ndatory) traffic class that SET FACHBANDW the service INTERACT INTERACT IDTH(Mandator belongs to. Based on Quality of Enumeratio IVE, IVE, y) Service (QoS), n Type BACKGRO BACKGRO SET UND UND USERHAPPYB there are two R(Mandatory) traffic classes: interactive, SET DTXDRXPAR background. A(Mandatory) SET HSSCCHLESS OPPARA(Mand atory)

8/7/2013

华为机密,未经许可不得扩散

第975页,共3267页

162734118.xls.ms_office1
SET REDIRECTIO N(Mandatory) ADD CELLREDIRE CTION(Mandat ory)

文档密级:

TrafficType

Traffic Type

This parameter specifies the AMR, VP, AMR,VP,P traffic type for the Enumeratio PSR99, SR99,PSHS RRC redirection n Type PSHSPA PA algorithm.

TRAMODE

Traffic mode

ADD Traffic mode of M3LKS(Option M3UA link set. al)

M3UA_OV ERRIDE_M Enumeratio OD, n Type M3UA_LO ADSHARE _MOD

M3UA_OV ERRIDE_M OD, M3UA_LO ADSHARE _MOD (For details of these two modes, refer to RFC4666.)

Transfer Common TransCchUse Channel User rNum number

Transfer Common Channel User number Value range: 0~10 Content: When the system is overloaded and congested, users on the DCH can be reconfigured to the CCH in order to reduce the cell load and recover the system. ADD The mechanism Interval CELLOLC(Opti of the OLC is that Type onal) an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of users selected in executing reconfiguration to the CCH.

0~10

0~10

8/7/2013

华为机密,未经许可不得扩散

第976页,共3267页

162734118.xls.ms_office1
This parameter specifies the round-trip transport delay of ADD Iub interface NODEB(Option when the al) transmission mode is ATM transmission or of IP dedicated network. The transport type of the ADD adjacent node of IPPATH(Option the path.This al) parameter only effect on Iub interface.

文档密级:

IUB Trans TRANSDEL Delay AY

Interval Type

0~65535

0~65535

TRANST

Transport Type

IP, IP, Enumeratio HYBRID_I HYBRID_I n Type P P

TRANST

Transport Type

ADD TRMMAP(Man datory) ADD ADJMAP(Man Transport type. datory) ADD ADJNODE(Ma ndatory)

ATM, IP, ATM_IP, ATM,IP,AT Enumeratio HYBRID_I M_IP,HYB n Type P RID_IP

8/7/2013

华为机密,未经许可不得扩散

第977页,共3267页

162734118.xls.ms_office1
ADD FACH(Mandato ry) ADD FACHLOCH(M andatory) ADD RACH(Optional ) ADD PCHDYNTFS( Optional) ADD FACHDYNTFS (Mandatory) ADD PCH(Optional) ADD RACHDYNTF S(Optional) ADD BCH(Optional)

文档密级:

TrChId

FACH ID

Uniquely identifying a common transport channel in a cell. Interval Configured Type according to the product specifications.

1~32

1~32

TrchType

Transport channel type

TrchType

Transport channel type

TrchType

Transport channel type

TRCH_HS This parameter ADD DSCH, specifies the type TYPRABHSPA Enumeratio TRCH_ED of transport (Mandatory) n Type CH_2MS, channel. TRCH_ED CH_10MS This parameter specifies the type of transport TRCH_DC ADD channel for the H, TYPRABOLPC typical RAB. For Enumeratio TRCH_ED (Mandatory) CS services, this n Type CH_2MS, parameter must TRCH_ED be set to CH_10MS TRCH_DCH. This parameter specifies the type TRCH_DC of transport H, channel at the ADD TRCH_HS local end for the TYPRABRLC( Enumeratio DSCH, typical RAB. For Mandatory) n Type TRCH_ED CS services, this CH_2MS, parameter must TRCH_ED be set to CH_10MS TRCH_DCH.

TRCH_HS DSCH, TRCH_ED CH_2MS, TRCH_ED CH_10MS

TRCH_DC H, TRCH_ED CH_2MS, TRCH_ED CH_10MS

TRCH_DC H, TRCH_HS DSCH, TRCH_ED CH_2MS, TRCH_ED CH_10MS

8/7/2013

华为机密,未经许可不得扩散

第978页,共3267页

162734118.xls.ms_office1
Related length for 1D records in the best cells. In the speed estimation algorithm, an algorithm is adopted to avoid inaccurate estimation caused by frequent handovers of best cells. That is, ADD during the latest CELLHCSHO( [TRELATELEN Related length Optional) GTH], if more Interval TRelateLengt for 1D records SET than one event 1D Type h HCSHO(Option of a certain cell al) occurs, the event 1D record is restored to the state when the 1st event 1D occurs during the latest [TRELATELEN GTH]. The given time length is set by this parameter. If the value is set too large, the RNC judges a non-frequently

文档密级:

0~120

0~120

8/7/2013

华为机密,未经许可不得扩散

第979页,共3267页

162734118.xls.ms_office1
If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell during the specified time of this parameter, the UE reselects the neighboring cell. It is used to avoid ping-pong reselection ADD between different Interval CELLSELRES cells. Note that Type EL(Optional) the value 0 corresponds to the default value defined in the protocol. Set the parameter as follows: 1. Ensure that the UE can reselect a cell when crossing the nonsoft-switch area of the cell and that the UE timely performs location

文档密级:

Treselections

Reselection delay time

0~31

0~31

This parameter indicates the UE reselction delay in the CELL_FACH connection mode. Reselection This parameter is delay time for ADD not configured Interval Treselectionsf UE in CELLSELRES when the value is Type ach CELL_FACH EL(Optional) 255. Instead, the state Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304.

0~31,255

{0~6.2},{25 5}, step:0.2

8/7/2013

华为机密,未经许可不得扩散

第980页,共3267页

162734118.xls.ms_office1
This parameter indicates the UE reselction delay in the CELL_PCH or URA_PCH connection mode. Reselection This parameter is ADD delay time for not configured Interval Treselections CELLSELRES UE in PCH when the value is Type pch EL(Optional) state 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304. This parameter ADD Traffic record specifies the Interval ATMTRF(Man index index of a traffic Type datory) record.

文档密级:

0~31,255

{0~31},{25 5}

TRFX

100~1999

100 to 1999

1A event TrigTime1A trigger delay time

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional) SET SMLC(Mandato ry)

This parameter specifies the time delay to trigger event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but D100, the slower the D120, response of the D160, event to Enumeratio D200, measurement n Type D240, signal change. D320, The purposes of D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第981页,共3267页

162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but D100, the slower the D120, response of the D160, event to Enumeratio D200, measurement n Type D240, signal change. D320, The purposes of D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the

文档密级:

1B event TrigTime1B trigger delay time

ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional) SET SMLC(Mandato ry)

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第982页,共3267页

162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but ADD D100, the slower the CELLINTRAF D120, response of the REQHO(Option D160, event to al) Enumeratio D200, measurement SET n Type D240, signal change. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the

文档密级:

1C event TrigTime1C trigger delay time

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第983页,共3267页

162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but ADD D100, the slower the CELLINTRAF D120, response of the REQHO(Option D160, event to al) Enumeratio D200, measurement SET n Type D240, signal change. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the

文档密级:

1D event TrigTime1D trigger delay time

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第984页,共3267页

162734118.xls.ms_office1
This parameter specifies the time delay to trigger 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the ADD D100, response of the CELLINTRAF D120, event to REQHO(Option D160, measurement al) Enumeratio D200, signal change. SET n Type D240, The purposes of INTRAFREQH D320, the time-to-trigger O(Optional) D640, mechanism are as D1280, follows: D2560, Reducing the D5000 number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of

文档密级:

1F event TrigTime1F trigger delay time

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第985页,共3267页

162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower D20, D40, probability of D60, D80, incorrect ADD D100, decision, but the CELLINTRAF D120, slower the REQHO(Option D160, response of event al) Enumeratio D200, to the change of SET n Type D240, measured signals. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the

文档密级:

TrigTime1J

1J event trigger delay time

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第986页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the D0, D10, lower probability D20, D40, of incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In

文档密级:

2C event TrigTime2C trigger delay time

ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第987页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In

文档密级:

2D event TrigTime2D trigger delay time

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第988页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In

文档密级:

2F event TrigTime2F trigger delay time

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第989页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the D100, response of the D120, event 3A to D160, measurement Enumeratio D200, signal change. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the

文档密级:

3A event TrigTime3A trigger delay time

ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

0,10,20,40,6 0,80,100,12 0,160,200,2 40,320,640, 1280,2560,5 000

8/7/2013

华为机密,未经许可不得扩散

第990页,共3267页

162734118.xls.ms_office1
Time delay to trigger the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the D100, response of the D120, event 3C to D160, measurement Enumeratio D200, signal change. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the

文档密级:

3C event TrigTime3C trigger delay time

ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第991页,共3267页

162734118.xls.ms_office1
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is D0, D10, implemented D20, D40, based on all links D60, D80, in the active set, D100, the ideal UE RxD120, Tx time SET D160, difference should HOCOMM(Opt Enumeratio D200, be 1024 chips. ional) n Type D240, When the UE RxD320, Tx time D640, difference D1280, becomes greater D2560, than the D5000 predefined threshold, event 6F will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331

文档密级:

6F event TrigTime6F trigger delay time

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第992页,共3267页

162734118.xls.ms_office1
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE RxTx time SET difference should HOCOMM(Opt be 1024 chips. ional) When the UE RxTx time difference becomes smaller than the predefined threshold, event 6G will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331 This parameter specifies the ADD number of a port ETHTRKLNK( that carries the Mandatory) link in a trunk group. This parameter ADD specifies the slot ETHTRKLNK( number for a Mandatory) member port in a trunk group. ADD ETHTRK(Mand atory) This parameter ADD specifies the ETHTRKIP(Ma number of a trunk ndatory) group. ADD ETHTRKLNK( Mandatory)

文档密级:

6G event TrigTime6G trigger delay time

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

TRKLNKPN

Trunk Link No.

Interval Type

0~7

0 to 7

TRKLNKSN

Trunk Link Slot No.

Interval Type

14~27

14 to 27

TRKN

Trunk No.

Interval Type

0~7

0 to 7

8/7/2013

华为机密,未经许可不得扩散

第993页,共3267页

162734118.xls.ms_office1
Radio Link Failure Timer Duration. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-ofsync indications of the number defined by NOutsyncInd. The NodeB shall ADD stop and reset the Interval CELLSETUP(O timer after Type ptional) receiving successive insync indications of the number defined by NInsyncInd. When the timer expires, the NodeB triggers the radio link failure process, and indicates which radio link set is out-of-sync. If the value is

文档密级:

TRlFailure

Radio link failure timer length

0~255

0~25.5, step: 0.1

TRncId

RNC ID of Target Cell

Uniquely HO identifying an CELL(Optional) RNC.

Interval Type

0~4095

0~4095

This parameter ADD specifies the TRUNK Dhcp TRUNKDHC NODEBESN(M TRUNK IP Server IP PSVRIP andatory) address for the DHCP server.

IP Address Type

0.0.0.0~255 .255.255.25 5

8/7/2013

华为机密,未经许可不得扩散

第994页,共3267页

162734118.xls.ms_office1

文档密级:

TRUNKIP

NodeB Interface IP Address

This parameter ADD specifies the IP IP Address NODEBESN(M address of the Type andatory) NodeB TRUNK.

0.0.0.0~255 .255.255.25 5

NodeB TRUNKIPM Interface IP ASK Mask

This parameter ADD specifies the NODEBESN(M subnet mask for andatory) the NodeB TRUNK.

IP Address Type

0.0.0.0~255 .255.255.25 5

TRUNKN

The Trunk group No.

This parameter ADD specifies the Interval IPLOGICPORT number of a trunk Type (Mandatory) group on the logical port.

0~7

0~7

8/7/2013

华为机密,未经许可不得扩散

第995页,共3267页

162734118.xls.ms_office1

文档密级:

TS

time slot No.

TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), This parameter TS6(Time_s specifies the lot_6), number of a TS7(Time_s timeslot. For E1 lot_7), LOP links, the value of TS8(Time_s E1T1(Mandator this parameter Enumeratio lot_8), y) ranges from 1 to n Type TS9(Time_s 31. For T1 links, lot_9), the value of this TS10(Time parameter ranges _slot_10), from 1 to 24. TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

8/7/2013

华为机密,未经许可不得扩散

第996页,共3267页

162734118.xls.ms_office1

文档密级:

16TimeSlot TS16ENABL switch E

This parameter specifies whether timeslot 16 is used. The setting SET of this parameter Enumeratio ON, OFF E1T1(Optional) should be n Type consistent with that at the peer end.

ON, OFF

8/7/2013

华为机密,未经许可不得扩散

第997页,共3267页

162734118.xls.ms_office1

文档密级:

Bearing time TSBITMAP slot

ADD PPPLNK(Mand atory) ADD FRALNK(Mand atory) ADD MPLNK(Manda tory)

This parameter specifies the timeslot bearing the E1/T1 link.

Bit Field Type

TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), TS7(Time_s lot_7), TS8(Time_s lot_8), TS9(Time_s lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time

TS1,TS2,TS 3,TS4,TS5, TS6,TS7,TS 8,TS9,TS10 ,TS11,TS12 ,TS13,TS14 ,TS15,TS16 ,TS17,TS18 ,TS19,TS20 ,TS21,TS22 ,TS23,TS24 ,TS25,TS26 ,TS27,TS28 ,TS29,TS30 ,TS31

TSCROSSX

Time slot cross index

This parameter specifies the index of timeslot ADD cross connection. Interval TSCROSS(Opti Type The index is onal) automatically generated by the system. This parameter STR specifies the SCHTSK(Optio name of the nal) scheduled task to be started.

0~65535

0 to 65535

TSKN

Task Name

String Type -

1~50 characters

8/7/2013

华为机密,未经许可不得扩散

第998页,共3267页

162734118.xls.ms_office1

文档密级:

Time window for deciding whether the UE is in lowmobility state. ADD Every time the CELLHCSHO( slow speed cycle Time window Optional) timer times out, Interval TSlowSpdEst for UE slow SET the RNC Type speed decision HCSHO(Option estimates whether al) the UE is in lowmobility state. The backdated time length is set by this parameter.

0~511

0~511

TstImsi

MGWTST USER IMSI

SET MGWTST user MGWTST(Man IMSI in a number String Type datory) segment.

15-bit numerical (0 to 9) string

TSTLEN

Test Len

This parameter specifies the time duration of the IP STR loopback test. Interval IPLOPTST(Opt During this Type ional) period, the DSP sends detection packets at a specified rate. Indicating SET whether setting MGWTST(Man MGWTST datory) Switch on.

1~120

1 to 120

TstSwitch

MGWTST SWITCH

Enumeratio OFF, ON n Type

OFF, ON

TTIME

This parameter STR specifies the Duration time CPUUSAGETS duration of the T(Mandatory) CPU usage test.

Interval Type

1 to 1~4294967 4294967295 295

8/7/2013

华为机密,未经许可不得扩散

第999页,共3267页

162734118.xls.ms_office1

文档密级:

TTL

PKT TTL

This parameter specifies the timeTRC to-live of a packet Interval MAC(Optional) detected through Type EthOAM 1AG link tracing. This parameter ADD specifies the Interval ATMLOGICPO forward Type RT(Mandatory) bandwidth of the logical port.

1~128

1 to 128

TXBW

Forward bandwidth

10~2810

530~14893 0

TXBW

Forward bandwidth

ADD Forward Interval IPPATH(Manda bandwidth of the Type tory) IP path.

1~3000000 1~3000000

TxBw

Forward Bandwidth

This parameter is valid only when Transport Resource Group ADD Type is ATM or Interval RSCGRP(Mand Transport Type atory) Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX.

0~4000000 0~4000000

8/7/2013

华为机密,未经许可不得扩散

第1000页,共3267页

162734118.xls.ms_office1
This parameter indicates whether transmission TRUE, Enumeratio diversity FALSE configuration of n Type the cell is activated. This parameter specifies the interval of sending the ping packets.

文档密级:

TX diversity TxDiversityIn indication d

ADD CELLSETUP( Mandatory) ADD NRNCCELL(M andatory)

TRUE, FALSE

TXINT

Interval of send

PING IP(Optional)

Interval Type

200~10000

200 to 10000

TXINT

Interval of Packet Send

This parameter STR specifies the Interval IPLOPTST(Opt interval for Type ional) sending loopback packets.

10~60

10 to 60

TXTRFX

TX traffic record index

ADD IPOAPVC(Opti onal) ADD AAL2PATH(M andatory) ADD SAALLNK(Ma ndatory) ADD VPCLCX(Mand atory)

This parameter specifies the TX traffic record index at the port from which the IPoA PVC goes out of the RNC. The TX traffic must have been configured.

Interval Type

100~1999

100 to 1999

8/7/2013

华为机密,未经许可不得扩散

第1001页,共3267页

162734118.xls.ms_office1
This parameter specifies the upper layer application type to be set. The type may be CCP, NCP, IPoA PVC, or ALCAP. Depending on the value of [Band indication], as shown below: Band1 General frequencies: [10562-10838] Additional frequencies: none Band2 General frequencies: [9662-9938] Additional frequencies: {412,437,462,487 ,512,537,562,587, 612,637,662,687} Band3 General frequencies: [1162-1513] Additional frequencies: none Band4 General frequencies: [1537-1738] Additional frequencies: {1887, 1912,

文档密级:

TYPE

Application Type

SET CTRLFACTOR (Mandatory)

NBAP_CC P, Enumeratio NBAP_NC n Type P, IUB_OAM, ALCAP

NBAP_CC P, NBAP_NC P, IUB_OAM, ALCAP

Downlink UARFCNDo UARFCN wnlink

ADD CELLSETUP(O ptional) ADD QUICKCELLS ETUP(Optional) ADD NRNCCELL(O ptional)

Interval Type

0~16383

0~16383

8/7/2013

华为机密,未经许可不得扩散

第1002页,共3267页

162734118.xls.ms_office1
Depending on the value of [Band indication], as shown below: Band1: General frequencies: [9612-9888] Additional frequencies: none Band2: General frequencies: [9262-9538] Additional frequencies: Interval {12,37,62,87,112, Type 137,162,187,212, 237,262,287} Band3: General frequencies: [9371288] Additional frequencies: none Band4: General frequencies: [1312-1513] Additional frequencies: {1662, 1687,

文档密级:

Uplink UARFCNUpl UARFCN ink

ADD CELLSETUP(O ptional) ADD QUICKCELLS ETUP(Optional) ADD NRNCCELL(O ptional)

0~16383

0~16383

8/7/2013

华为机密,未经许可不得扩散

第1003页,共3267页

162734118.xls.ms_office1

文档密级:

Indicating whether the UL frequency of the cell need be configured. TRUE indicates that the UL frequency need be configured. ADD FALSE indicates CELLSETUP(O that the UL UL frequency ptional) frequency need TRUE, UARFCNUpl Enumeratio ind ADD not be configured. FALSE inkInd n Type NRNCCELL(O It is configured ptional) automatically according to the relationship between UL and DL frequencies. For detailed information of this parameter, refer to 3GPP TS 25.433.

TRUE, FALSE

Unblocking UBLREQTM request timer R

This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for unblocking an AAL2 path.

Interval Type

2000~6000 2000~6000 0 0

UDP MUX UDPMUXLE Max Length N

ADD UDP MUX Max Interval IPPATH(Option Length. Type al)

135~1031

135~1031

8/7/2013

华为机密,未经许可不得扩散

第1004页,共3267页

162734118.xls.ms_office1
Receive UDP MUX Mode(Only effect on IuCS interface). Not support udpmux mode means receiver not support UDP ADD Receive UDP MUX, RTP head UDPMUXM IPPATH(Option MUX Mode not MUX mode ODRECV al) means receiver support UDP MUX but not RTP header MUX,RTP head MUX mode means support both. Sender UDP MUX Mode(Only effect on IuCS interface), Not support udpmux mode means not support UDP ADD MUX, RTP head Sender UDP UDPMUXM IPPATH(Option not MUX mode MUX Mode ODSEND al) means the sender support UDP MUX but not RTP header MUX,RTP head MUX mode means support both.

文档密级:

MUXCLOS E, Enumeratio NORTPCO n Type MP, RTPCOMP

MUXCLOS E, NORTPCO MP, RTPCOMP

MUXCLOS E, Enumeratio NORTPCO n Type MP, RTPCOMP

MUXCLOS E, NORTPCO MP, RTPCOMP

UDP MUX UDPMUXTI Max Time ME

ADD UDP MUX Max Interval IPPATH(Option Time. Type al)

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1005页,共3267页

162734118.xls.ms_office1

文档密级:

Switch for sending A-GPS assistance data in UE-assisted A- SET UE-assisted Bit Field UeAssAgpsA GPS Data SMLC(Optional mode. This Type ssDataSwitch Send switch ) parameter specifies the GPS data to be sent.

REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY

REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY

UE-based AUeBasAgpsA GPS Data ssDataSwitch Send Switch

Switch for sending A-GPS SET assistance data in Bit Field SMLC(Optional UE-based mode. Type ) This parameter specifies the GPS data to be sent.

A timer used to UE capability SET wait UE Interval UeCapEnqRs enquiry STATETIMER( capability enquiry Type pTmr response timer Optional) response .

1~10000

1~10000

8/7/2013

华为机密,未经许可不得扩散

第1006页,共3267页

162734118.xls.ms_office1

文档密级:

A timer to RNC wait for the UE counter SET response to UeCntCheck check response STATETIMER( counter check in RspTmr timer Optional) security mode procedure.

Interval Type

1~10000

1~10000

UINT

Uninhibit Type

This parameter specifies the type of the LOGIC(Log LOGIC(Log UIN uninhibition, ic ic BRD(Mandator which can be Enumeratio uninhibit), uninhibit), y) physical n Type PHYSICAL PHYSICAL uninhibition and (Physical (Physical logical uninhibit) uninhibit) uninhibition.

UINTTIME

Unit time

This parameter STR specifies the unit Interval E1T1TST(Optio time used for the Type nal) BER test.

300~1000

300 to 1000

UL

Upper Limit

This parameter SET specifies the ALMPORT(Opt String Type upper limit of the ional) alarm.

0~9Charact ers

8/7/2013

华为机密,未经许可不得扩散

第1007页,共3267页

162734118.xls.ms_office1
UL activity factor of the R99 AMR conversational service Signals might be discontinuously transmitted because of the activation detection of conversational service and source changes of data service. The UL AF of R99 SET activity factor is Interval UlAmrConvA AMR conv ADMCTRL(Op defined as the Type F service tional) ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL. A pair of activity factors is separately defined for each of the four service classes.

文档密级:

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第1008页,共3267页

162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6A1 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6A1 than the absolute me6A1 SET n Type D240, upper threshold QUALITYME D320, 6A1. When the AS(Optional) D640, event 6A1 is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1009页,共3267页

162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A2 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6A2 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6A2 than the absolute me6A2 SET n Type D240, upper threshold QUALITYME D320, 6A2. When the AS(Optional) D640, event 6A2 is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1010页,共3267页

162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6B1 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is lower UlAmrTrigTi al) Enumeratio D200, Time 6B1 than the absolute me6B1 SET n Type D240, lower threshold QUALITYME D320, 6B1. When the AS(Optional) D640, event 6B1 is D1280, triggered, the D2560, AMR speech rate D5000 should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1011页,共3267页

162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6B2 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is lower UlAmrTrigTi al) Enumeratio D200, Time 6B2 than the absolute me6B2 SET n Type D240, lower threshold QUALITYME D320, 6B2. When the AS(Optional) D640, event 6B2 is D1280, triggered, the D2560, AMR speech rate D5000 should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1012页,共3267页

162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6D measurement condition before the event 6D is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6D is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6D than the absolute me6D SET n Type D240, upper threshold QUALITYME D320, 6D. When the AS(Optional) D640, event 6D is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The

文档密级:

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

UL activity UL AF of R99 SET factor of the R99 Interval UlBackgroun background ADMCTRL(Op background Type dAF service tional) service.

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第1013页,共3267页

162734118.xls.ms_office1
Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 Physical value range: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 Content: L3 filtering D0, D1, coefficient. The SET D2, D3, D4, larger the value of LDM(Optional) this parameter, D5, D6, D7, SET the stronger the Enumeratio D8, D9, SATLDM(Opti smoothing effect n Type D11, D13, onal) D15, D17, and the higher the D19 anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: D6

文档密级:

UL basic UlBasicCom common mMeasFilter measure filter Coeff coeff

D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19

8/7/2013

华为机密,未经许可不得扩散

第1014页,共3267页

162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use DCH to carry UL PS domain background/intera ctive services. If the FRC parameters of the best cell cannot be obtained, this SET default value will FRCCHLTYPE be used. Only UL BE traffic PARA(Optional when the UL UlBeTraffDe DCH decision ) Enumeratio D8, D16 service rate is cThs threshold ADD n Type higher than or CELLFRC(Opti equal to this onal) threshold, and the DL service rate is higher than or equal to the downlink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. According to the product

文档密级:

8, 16

8/7/2013

华为机密,未经许可不得扩散

第1015页,共3267页

162734118.xls.ms_office1
UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate.The larger this parameter to be set, the sooner max bit rate to be UL BE traffic SET reached, but the UlBeTraffInit Initial bit rate FRC(Optional) bit rate is more Bitrate likely to be declined when system congested, so it makes no sense to set this parameter too high. Contrarily,the smaller the parameter to be set, the more easily the BE traffic to be accessed at required bit rate. The rate decision threshold of UL PS domain background/intera ctive service to be carried on EDCH. When the SET UL BE traffic maximum UL FRCCHLTYPE UlBeTraffThs threshold on service rate is PARA(Optional OnHsupa HSUPA higher than or ) equal to this threshold, the service will be carried on EDCH; otherwise, it will be carried on DCH.

文档密级:

D8, D16, D32, D64, 8,16,32,64,1 Enumeratio D128, 28,144,256, n Type D144, 384 D256, D384

D8, D16, D32, D64, D128, D144, D256, Enumeratio D384, n Type D608, D1440, D2048, D2880, D5740

8,16,32,64,1 28,144,256, 384,608,144 0,2048,2880 ,5740

8/7/2013

华为机密,未经许可不得扩散

第1016页,共3267页

162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of BE keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.

文档密级:

BE Trigger UlBeTrigTim Time 6A1 e6A1

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

BE Trigger UlBeTrigTim Time 6A2 e6A2

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1017页,共3267页

162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of BE keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.

文档密级:

BE Trigger UlBeTrigTim Time 6B1 e6B1

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

BE Trigger UlBeTrigTim Time 6B2 e6B2

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1018页,共3267页

162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6D measurement condition before the event 6D is D0, D10, triggered. The D20, D40, trigger time is D60, D80, ADD used to prevent D100, CELLQUALIT the sudden D120, YMEAS(Option change of the D160, al) measured value Enumeratio D200, SET for being n Type D240, QUALITYME reported. The D320, AS(Optional) longer the trigger D640, time is, the D1280, greater the effect D2560, of ignoring D5000 sudden changes is. Yet the response to changes of the measured value becomes slower. SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type CAC.

文档密级:

BE Trigger UlBeTrigTim Time 6D e6D

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

UL CAC UlCacAvgFilt smoothing erLen filter length

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第1019页,共3267页

162734118.xls.ms_office1
The admission control decision is only for dedicated channels. For common channels, some resources instead of a special admission procedure are reserved. In the UL, according to the current load factor and the ADD characteristics of Interval CELLCAC(Opti the new call, the Type onal) UL CAC algorithm predicts the new traffic channels load factor with the assumption of admitting the new call, then plus with the premeditated common channel UL load factor to get the predicted UL load factor. Then, compare it

文档密级:

UL common channel load UlCCHLoadF reserved actor coefficient

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1020页,共3267页

162734118.xls.ms_office1
Admission threshold of total cell uplink power. This parameter is related to the target load of the uplink schedule. The total uplink load fluctuates closing to the target load due to the schedule mechanism of the HSUPA. Therefore, the ADD target load is CELLCAC(Opti added with onal) margin, acting as the basis of this parameter. If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may This parameter specifies the compression method that the NodeB supports in the uplink. - SF/2: SF reduction by two ADD HIGHER_LAYE NODEBLMTP R_SCHDL: ARA(Optional) higher layer scheduling If both SF/2 and HIGHER_LAYE R_SCHDL are selected, the NodeB supports both of the compression methods in the

文档密级:

UL total UlCellTotalT power hd threshold

Interval Type

0~100

0~1, step:0.01

Uplink Compression UlCmMethod Method

Bit Field Type

SF/2, HIGHER_L AYER_SC HDL

SF/2, HIGHER_L AYER_SC HDL

8/7/2013

华为机密,未经许可不得扩散

第1021页,共3267页

162734118.xls.ms_office1
Number of users selected in a UL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively Number of users selected in a UL LDR CS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value.

文档密级:

ADD CELLLDR(Opti UL CS should UlCSInterRat onal) be HO user ShouldBeHO ADD number UeNum NODEBLDR(O ptional)

Interval Type

1~10

1~10

ADD CELLLDR(Opti UL CS should UlCSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)

Interval Type

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1022页,共3267页

162734118.xls.ms_office1
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the This parameter specifies the UL FP mode of this type of RAB. For details of normal mode and silent mode, refer to section 5.1.1 of the 3GPP TS 25.427. Maximum UL rate when coverage of the entire cell is ensured under certain load. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the coveragebased DCCC algorithm is applied to BE services whose maximum UL rate

文档密级:

Uplink Bit SET UlDcccRateT Rate Threshold DCCC(Optional hd For DCCC )

D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

UlFpMode

UL FP Mode

ADD TYPRABBASI C(Mandatory)

NORMAL, NORMAL, Enumeratio SILENT SILENT n Type

Uplink Full UlFullCvrRat Coverage Bit e Rate

ADD CELLDCCC(O ptional) SET DCCC(Optional )

D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第1023页,共3267页

162734118.xls.ms_office1

文档密级:

UlGBR

This parameter SET Uplink GBR specifies the UL USERGBR(Opt for BE service GBR of the BE ional) service.

D0, D8, D16, D32, Enumeratio D64, D128, n Type D144, D256, D384

0, 8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第1024页,共3267页

162734118.xls.ms_office1
Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that none of them are reserved for handover. If the UL spare resource cant satisfy the SF4(SF4), reserved resource SF8(SF8), after the access of SF16(SF16) a new service, the , service will be SF32(SF32) rejected. If the , UL handover ADD value is too high, SF64(SF64) UlHoCeResv credit reserved CELLCAC(Opti Enumeratio the credit , Sf SF onal) n Type resource reserved SF128(SF1 for handover UEs 28), will be less, SF256(SF2 leading to the 56), increased SFOFF(SF possibility of OFF) rejecting handover UE admissions, and performance of handover UEs cannot be guaranteed. If the value is too low, the possibility of

文档密级:

SF4,SF8,SF 16,SF32,SF 64,SF128,S F256,SFOF F

8/7/2013

华为机密,未经许可不得扩散

第1025页,共3267页

162734118.xls.ms_office1
If the HSDPCCH carries ACK/NACK, the system will not perform CAC. If the HS-DPCCH carries CQI, the system will perform CAC. This parameter refers to the resources reserved for the uplink HSDPCCH carrying UL HSADD ACK/NACK. The UlHsDpcchR DPCCH CELLCAC(Opti corresponding svdFactor reserve factor onal) threshold is the uplink limit capacity multiplied by this parameter. If the value is too high, the possibility of wrong rejection to uplink admissions increases, leading to waste in uplink resources. If the value is too low, the uplink resources is This parameter specifies the EDCH data transfer mode of IMS signalling IMS signalling UlIMSTrans transmission SET services. It is ModeOnHsup mode on FRC(Optional) valid only when a HSUPA IMS signalling services are mapped onto the E-DCH.

文档密级:

Interval Type

0~100

0~1, step:0.01

SCHEDUL Enumeratio ED, NONn Type SCHEDUL ED

SCHEDUL ED, NONSCHEDUL ED

UL activity UL AF of R99 SET factor of the R99 Interval UlInteractAF interactive ADMCTRL(Op interactive Type service tional) service.

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第1026页,共3267页

162734118.xls.ms_office1
The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell ADD load is decreased. Interval CELLLDR(Opti However, high Type onal) value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is to

文档密级:

UL HO UlInterFreqH maximum oBWThd bandwidth

0~400000

0~400000

8/7/2013

华为机密,未经许可不得扩散

第1027页,共3267页

162734118.xls.ms_office1

文档密级:

The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find ADD a qualified target UlInterFreqH UL HO load Interval CELLLDR(Opti cell for the blind oCellLoadSpa space threshold Type onal) handover. ceThd Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the interfrequency blind handover occurs.

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1028页,共3267页

162734118.xls.ms_office1
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in UL LDRexecuting uplink ADD UlLdrAMRR AMR rate LDR-AMR voice Interval CELLLDR(Opti ateReduction reduction RAB service rate Type onal) RabNum number reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme-underload). If the parameter value is too low, the LDR action has a slow SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type LDR.

文档密级:

1~10

1~10

UL LDR UlLdrAvgFilt smoothing erLen filter length

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第1029页,共3267页

162734118.xls.ms_office1
Number of RABs selected in a UL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the ADD parameter to a CELLLDR(Opti comparatively onal) low value. If the Interval ADD high-rate Type NODEBLDR(O subscribers ptional) occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively

文档密级:

UL LDR-BE UlLdrBERate rate reduction ReductionRab RAB number Num

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1030页,共3267页

162734118.xls.ms_office1
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could be triggered only when the SF factor corresponding to the uplink reserved credit is SF4(SF4), higher than the SF8(SF8), uplink or SF16(SF16) ADD downlink credit , SF4, SF8, CELLLDR(Opti SF reserved SF32(SF32) SF16, SF32, onal) threshold. The , Enumeratio SF64, ADD lower the SF64(SF64) n Type SF128, NODEBLDR(O parameter value , SF256 ptional) is, the easier the SF128(SF1 credit enters the 28), congestion status, SF256(SF2 the easier the 56) LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission

文档密级:

UL LDR credit SF UlLdrCreditS reserved fResThd threshold

8/7/2013

华为机密,未经许可不得扩散

第1031页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as , CELLLDR(Opti UlLdrFirstAction. Enumeratio CSInterRat onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

UlLdrEighth Action

UL LDR eighth action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1032页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR fifth onal) , UlLdrFifthAc UlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1033页,共3267页

162734118.xls.ms_office1
NOACT: No NoAct(no load reshuffling action), action is taken. InterFreqL INTERFREQLD DHO(interHO: The interfreq load frequency load handover), handover is BERateRed performed. (BE traff BERATERED: rate Channels are reduction), NoAct,Inter reconfigured for QoSRenego FreqLDHO, the BE service. (uncontrolle BERateRed, QOSRENEGO: d real-time QoSRenego ADD The renegotiation traff Qos re- ,CSInterRat CELLLDR(Opti on the QoS of the negotiation) ShouldBeL UL LDR first onal) uncontrollable , DHO,PSInt UlLdrFirstAct Enumeratio action ADD real-time service CSInterRat erRatShould ion n Type NODEBLDR(O is performed. ShouldBeL BeLDHO,A ptional) CSINTERRATS DHO(CS MRRateRed HOULDBELDH domain ,CSInterRat O: The inter-RAT inter-rat ShouldNotL SHOULDBE load should be DHO,PSInt handover of the load erRatShould CS domain is handover), NotLDHO performed. PSInterRatS PSINTERRATS houldBeLD HOULDBELDH HO(PS O: The inter-RAT domain SHOULDBE load inter-rat handover of the should be PS domain is load performed. handover),

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第1034页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , UlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

UlLdrFourth Action

UL LDR fourth action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1035页,共3267页

162734118.xls.ms_office1
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is ADD analogous to the UL LDR un- CELLLDR(Opti setting of BE UlLdrPsRTQ ctrl RT Qos re- onal) service rate Interval osRenegRab nego RAB ADD reduction Type Num num NODEBLDR(O subscriber ptional) number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS

文档密级:

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1036页,共3267页

162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds

文档密级:

UL LDR UlLdrRelThd release threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1037页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , UlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

UL LDR UlLdrSecond second action Action

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1038页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as UL LDR , UlLdrSeventh CELLLDR(Opti UlLdrFirstAction. Enumeratio seventh action CSInterRat Action onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1039页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR sixth onal) , UlLdrSixthAc UlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1040页,共3267页

162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR third onal) , UlLdrThirdA UlLdrFirstAction. Enumeratio action ADD CSInterRat ction The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),

文档密级:

NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO

8/7/2013

华为机密,未经许可不得扩散

第1041页,共3267页

162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds

文档密级:

UL LDR UlLdrTrigTh trigger d threshold

0~100

0~1, step:0.01

Uplink Maximum UlMaxNumO Number of fTfc TFC

This parameter specifies the maximum number of TFCs D16, D32, (Transport Format D48, D64, ADD Combination) D96, D128, NODEBLMTP allowed in the Enumeratio D256, ARA(Optional) uplink. The larger n Type D512, the value of this D1024 parameter, the larger the number of available TFCs in the uplink.

16, 32, 48, 64, 96, 128, 256, 512, 1024

8/7/2013

华为机密,未经许可不得扩散

第1042页,共3267页

162734118.xls.ms_office1
Smooth filtering coefficient for UL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. ADD Smoothness is D0, D1, CELLQUALIT decided by the D2, D3, D4, YMEAS(Option filtering D5, D6, D7, al) coefficient of the Enumeratio D8, D9, SET measurement. n Type D11, D13, QUALITYME The greater the D15, D17, AS(Optional) filtering D19 coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower.

文档密级:

UL Measurement UlMeasFilter Filter Coef Coefficient

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19

Uplink Mid Bit Rate UlMidRateCa Calculate lc Method

This parameter determines whether SET automatic or AUTO_CA DCCC(Optional manual mode is Enumeratio LC, 0, 1 ) used for 3-step n Type HAND_AP adjustment of the POINT uplink intermediate rate.

8/7/2013

华为机密,未经许可不得扩散

第1043页,共3267页

162734118.xls.ms_office1

文档密级:

Uplink Mid UlMidRateTh Bit Rate d Threshold

Threshold of the UL intermediate rate when the 3step mode is used D16, D32, SET 16, 32, 64, for UL rate D64, D128, DCCC(Mandato Enumeratio 128, 144, adjustment and D144, ry) n Type 256, 384 the manual mode D256, D384 is used for UL intermediate rate adjustment.

To adjust the UL AMR speech rate, AMRC delivers the TFC SET CONTROL AMRC(Optiona command and UL Mode l) starts this timer. If Interval UlModeChan Change Timer SET no failure Type geTimerLen Length AMRCWB(Opt message is ional) received when the timer expires, the adjustment of the UL AMR speech rate is successful.

1~64000

1~64000

UL activity UL AF of R99 SET factor of the R99 Interval UlNonAmrCo non AMR conv ADMCTRL(Op non AMR Type nvAF service tional) conversational service.

0~100

0~1, step: 0.01

8/7/2013

华为机密,未经许可不得扩散

第1044页,共3267页

162734118.xls.ms_office1
The percentage of the conversational AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR UL threshold ADD service is Interval UlNonCtrlTh of Conv AMR CELLCAC(Opti accessing, the Type dForAMR service onal) RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the UL load of a cell

文档密级:

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1045页,共3267页

162734118.xls.ms_office1
The percentage of the handover service admission threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to ADD a cell, the RNC Interval CELLCAC(Opti evalutates the Type onal) measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this

文档密级:

UL handover UlNonCtrlTh access dForHo threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1046页,共3267页

162734118.xls.ms_office1
The percentage of the conversational non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a nonADD AMR service is Interval CELLCAC(Opti accessing, the Type onal) RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of a nonAMR speech service, this service will be rejected. If the UL load of a cell

文档密级:

UL threshold UlNonCtrlTh of Conv dForNonAM non_AMR R service

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1047页,共3267页

162734118.xls.ms_office1
The percentage of other service thresholds to the 100% uplink load. The services refer to other admissions except the conversational AMR service, conversational non-AMR service, and handover scenarios. It is applicable to ADD algorithm 1 and Interval CELLCAC(Opti algorithm 2. The Type onal) parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type OLC.

文档密级:

UL threshold UlNonCtrlTh of other dForOther services

0~100

0~1, step:0.01

UL OLC UlOlcAvgFilt smoothing erLen filter length

1~32

1~32

8/7/2013

华为机密,未经许可不得扩散

第1048页,共3267页

162734118.xls.ms_office1
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti uplink load. Type onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink

文档密级:

UL OLC fast UlOlcFTFRst TF restrict rctRabNum RAB number

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1049页,共3267页

162734118.xls.ms_office1
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti uplink load. onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of uplink OLC fast TF restriction L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the LDM(Optional) anti-slow-fading SET capability, but the SATLDM(Opti lower the signal onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433.

文档密级:

UL OLC fast UlOlcFTFRst TF restrict rctTimes times

Interval Type

0~100

0~100

UL overload UlOlcMeasFil measure filter terCoeff coeff

D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19

D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19

8/7/2013

华为机密,未经许可不得扩散

第1050页,共3267页

162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than

文档密级:

UL OLC UlOlcRelThd release threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1051页,共3267页

162734118.xls.ms_office1
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on UL OLC traff ADD the action rules to Interval UlOlcTraffRe release RAB CELLOLC(Opti perform this Type lRabNum number onal) action. This parameter defines the maximum number of RABs released in executing uplink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The SET LDM(Optional) UL OLC trigger Interval SET hysteresis. Type SATLDM(Opti onal)

文档密级:

0~10

0~10

UL OLC UlOlcTrigHys trigger t hysteresis

1~6000

10~60000, step:10

8/7/2013

华为机密,未经许可不得扩散

第1052页,共3267页

162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than

文档密级:

UL OLC UlOlcTrigTh trigger d threshold

0~100

0~1, step:0.01

8/7/2013

华为机密,未经许可不得扩散

第1053页,共3267页

162734118.xls.ms_office1
Number of users selected in a UL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis ADD of the actual CELLLDR(Opti circumstances. If UL PS should UlPSInterRat onal) the high-rate Interval be HO user ShouldBeHO ADD subscribers Type number UeNum NODEBLDR(O occupy a high ptional) proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm

文档密级:

1~10

1~10

8/7/2013

华为机密,未经许可不得扩散

第1054页,共3267页

162734118.xls.ms_office1
Number of users selected in a UL LDR PS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion Rate adjustment switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, UL rate of AMR services can be adjusted. Inter-frequency handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR services to ensure the QoS.

文档密级:

ADD CELLLDR(Opti UL PS should UlPSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)

Interval Type

1~10

1~10

Adjustment Switch For UlQosAmrAd AMR Uplink jSwitch Rate

SET QOSACT(Optio nal)

Enumeratio NO, YES n Type

NO, YES

InterFreq HO SET UlQosAmrInt For Switch For QOSACT(Optio erFreqHoSwit Uplink AMR nal) ch

Enumeratio NO, YES n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第1055页,共3267页

162734118.xls.ms_office1
Inter-RAT handover switch of link stability control for UL QoS of AMR InterRat HO SET services. When UlQosAmrInt Switch For QOSACT(Optio the parameter is Enumeratio NO, YES erRatHoSwitc Uplink AMR nal) set to YES, inter- n Type h RAT handover can be performed for AMR services to ensure the QoS. Timer length for uplink Qos measurement. This parameter controls the time lengths for the inter-frequency and inter-RAT measurement based on Qos. After interfrequency or interRAT ADD measurement CELLQOSHO( starts, if no interUp Link Qos Optional) frequency Interval ULQosMcTi Measure timer 0~512 SET handover is Type merLen length QOSHO(Option performed when al) this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the interfrequency or interRAT

文档密级:

NO, YES

0~512

8/7/2013

华为机密,未经许可不得扩散

第1056页,共3267页

162734118.xls.ms_office1
Inter-frequency handover switch of link stability control for UL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of WAMR services can be adjusted. Inter-frequency handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR services to ensure the QoS. Inter-RAT handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, interRAT handover can be performed for WAMR services to ensure the QoS.

文档密级:

InterFreq HO SET UlQosVpInter Switch For QOSACT(Optio FreqHoSwitc Uplink VP nal) h

Enumeratio NO, YES n Type

NO, YES

Switch Of WAMR UlQosWAmr Uplink Rate AdjSwitch Adjustment

SET QOSACT(Optio nal)

Enumeratio NO, YES n Type

NO, YES

InterFreq HO SET UlQosWAmrI Switch For QOSACT(Optio nterFreqHoS Uplink nal) witch WAMR

Enumeratio NO, YES n Type

NO, YES

InterRat HO UlQosWAmrI Switch For nterRatHoSwi Uplink tch WAMR

SET QOSACT(Optio nal)

Enumeratio NO, YES n Type

NO, YES

8/7/2013

华为机密,未经许可不得扩散

第1057页,共3267页

162734118.xls.ms_office1
This parameter determines whether the UL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in uplink. This parameter determines whether the UL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in uplink. CM implementation approach selection basis. When the uplink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommended only for low-rate users. The highlayer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively narrow range. In

文档密级:

Uplink Rate UlRateDnAdj Decrease Level Adjust Level

SET DCCC(Optional )

2_Rates, Enumeratio 3_Rates n Type

2_Rates, 3_Rates

Uplink Rate UlRateUpAdj Increase Level Adjust Level

SET DCCC(Optional )

2_Rates, Enumeratio 3_Rates n Type

2_Rates, 3_Rates

UL SF UlSFTurnPoi threshold nt

ADD CELLCMCF(O ptional) SET CMCF(Optional )

D8, D16, Enumeratio D32, D64, 8,16,32,64,1 n Type D128, D256 28,256

8/7/2013

华为机密,未经许可不得扩散

第1058页,共3267页

162734118.xls.ms_office1

文档密级:

UL AF of UlSrbActFact SRB or

SET UL activity ADMCTRL(Op factor of SRB. tional)

Interval Type

0~100

0~1, step: 0.01

SRB UlSRBTrans transmission ModeOnHsup mode on a HSUPA

This parameter specifies the EDCH data transfer mode of SCHEDUL SCHEDUL SET SRB services. It Enumeratio ED, NON- ED, NONFRC(Optional) is valid only when n Type SCHEDUL SCHEDUL SRB services are ED ED mapped onto the E-DCH.

UL AF of R99 SET UL activity Interval UlStreamAF Streaming ADMCTRL(Op factor of the R99 Type service tional) streaming service.

0~100

0~1, step: 0.01

This parameter specifies the default rate threshold for decision to use EDCH to carry UL PS domain D8, D16, streaming UL streaming SET D32, D64, services. When traffic FRCCHLTYPE UlStrThsOnH the maximum UL Enumeratio D128, threshold on PARA(Optional supa n Type D144, service rate is HSUPA ) D256, D384 higher than or equal to this threshold, the service will be carried on EDCH. Otherwise, it will be carried on DCH.

8, 16, 32, 64, 128, 144, 256, 384

8/7/2013

华为机密,未经许可不得扩散

第1059页,共3267页

162734118.xls.ms_office1
This parameter specifies the EDCH data Streaming transfer mode of traffic streaming SET UlStrTransM transmission services. It is FRC(Optional) odeOnHsupa mode on valid only when HSUPA streaming services are mapped onto the E-DCH. Measurement reporting threshold for triggering event 6A1. The event reporting mode is used. Event 6A1 is triggered when the measured ADD value is higher Uplink Event TYPRABQUA than the absolute UlThd6A1 6A1 Relative LITYMEAS(M threshold 6A1. Threshold andatory) This event can trigger UL QoS operation. This parameter specifies a relative threshold. Absolute threshold of 6A1 = Max Ul Tx Power UlThd6A1.

文档密级:

SCHEDUL Enumeratio ED, NONn Type SCHEDUL ED

SCHEDUL ED, NONSCHEDUL ED

Interval Type

0~82

0~82

8/7/2013

华为机密,未经许可不得扩散

第1060页,共3267页

162734118.xls.ms_office1
Measurement reporting threshold for triggering event 6A2. The event reporting mode is used. Event 6A2 is triggered when the measured value is higher than the absolute threshold 6A2. When this event report is received, UL rate of AMR or BE services cannot be raised. This parameter specifies a relative threshold. Absolute threshold of 6A2 = Max Ul Tx Power UlThd6A2. Measurement reporting threshold for triggering event 6B1. The event reporting mode is used. Event 6B1 is triggered when the measured value is lower than the absolute threshold 6B1. When this event report is received, UL QoS operation is stopped. This parameter specifies a relative threshold. Absolute threshold of 6B1 = Max Ul Tx Power -

文档密级:

UlThd6A2

ADD Uplink Event TYPRABQUA 6A2 Relative LITYMEAS(M Threshold andatory)

Interval Type

0~82

0~82

UlThd6B1

ADD Uplink Event TYPRABQUA 6B1 Relative LITYMEAS(M Threshold andatory)

Interval Type

0~82

0~82

8/7/2013

华为机密,未经许可不得扩散

第1061页,共3267页

162734118.xls.ms_office1
Measurement reporting threshold for triggering event 6B2. The event reporting mode is used. Event 6B2 is triggered when the measured value is lower than the absolute ADD Uplink Event threshold 6B2. TYPRABQUA Interval 6B2 Relative When this event LITYMEAS(M Type Threshold report is received, andatory) UL rate of AMR or BE services can be raised. This parameter specifies a relative threshold. Absolute threshold of 6B2 = Max Ul Tx Power UlThd6B2.

文档密级:

UlThd6B2

0~82

0~82

8/7/2013

华为机密,未经许可不得扩散

第1062页,共3267页

162734118.xls.ms_office1
When the algorithm 2 is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink load. The parameter should be related to the admission threshold and UL total ADD actual condition Interval UlTotalEqUs equivalent user CELLCAC(Opti of the network. If Type erNum number onal) the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. This parameter specifies the step size of the closedloop power SET control performed Interval FRC(Optional) on UL DPCH. Type For details of this parameter, refer to the 3GPP TS 25.214.

文档密级:

1~200

1~200

UL closed loop power UlTpcStepSiz control step e size

1~2

1~2

8/7/2013

华为机密,未经许可不得扩散

第1063页,共3267页

162734118.xls.ms_office1
Duration when the measured value of VP keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of VP keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.

文档密级:

VP Trigger UlVpTrigTim Time 6A1 e6A1

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

VP Trigger UlVpTrigTim Time 6B1 e6B1

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

8/7/2013

华为机密,未经许可不得扩散

第1064页,共3267页

162734118.xls.ms_office1
Duration when the measured value of VP keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). This parameter specifies the estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement).

文档密级:

VP Trigger UlVpTrigTim Time 6D e6D

ADD CELLQUALIT YMEAS(Option al) SET QUALITYME AS(Optional)

D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000

0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000

Cell Center UncertAltitud Uncertainty e Altitude

ADD SMLCCELL(O ptional)

Interval Type

0~990

0~990

Cell Center UncertAltitud Uncertainty eImp Altitude

ADD SMLCCELL(O ptional)

Interval Type

0~3248

0~3248

8/7/2013

华为机密,未经许可不得扩散

第1065页,共3267页

162734118.xls.ms_office1

文档密级:

Cell Center UncertSemiM Uncertainty ajor Semi-major

Length of the semi-major axis of an uncertain area in the cell ADD center. Interval SMLCCELL(O This is controlled Type ptional) by MTRLGY and valid when MET~0(metric system).

0~1800000 0~1800000

Cell Center UncertSemiM Uncertainty ajorImp Semi-major

This parameter specifies the length of the semimajor axis of an ADD uncertain area in Interval SMLCCELL(O the cell center. Type ptional) This is controlled by MTRLGY and valid when IMP~1(British measurement).

0~5905440 0~5905440

Cell Center UncertSemiM Uncertainty inor Semi-minor

Length of the semi-minor axis of an uncertain area in the cell ADD center. Interval SMLCCELL(O This is controlled Type ptional) by MTRLGY and valid when MET~0(metric system).

0~1800000 0~1800000

8/7/2013

华为机密,未经许可不得扩散

第1066页,共3267页

162734118.xls.ms_office1

文档密级:

Cell Center UncertSemiM Uncertainty inorImp Semi-minor

This parameter specifies the length of the semiminor axis of an ADD uncertain area in Interval SMLCCELL(O the cell center. Type ptional) This is controlled by MTRLGY and valid when IMP~1(British measurement).

0~5905440 0~5905440

UNILNKN

UNI link No.

This parameter ADD specifies the Interval UNILNK(Mand number of a UNI Type atory) link.

0~167

0 to 31(AEUa), 0 to 125(E1 of AOUa),0 to 167(T1 of AOUa).

This parameter specifies the coefficient of the maximum duration of each SET Up Limit counting. The Interval UpLimitCoun RNCMBMSPA Counting Time maximum Type tingTime RA(Optional) duration is MCCH modification period multiplied by this parameter.

2~20

2~20

UPPERANI

Upper Ani

ID of the upper ADD node when Interval ADJNODE(Ma ISROOTNODE is Type ndatory) NO.

0~1999

0~1999

8/7/2013

华为机密,未经许可不得扩散

第1067页,共3267页

162734118.xls.ms_office1

文档密级:

Upper Class Transport UPPERGRPI Resource D Group No.

Number of the upper class transport resource ADD group. This Interval RSCGRP(Mand parameter is valid Type atory) only when [ISFIRSTCLASS ] is NO.

0~119

0~119

UPPERVP

The Upper Logical port Number

URA1

URA ID 1

This parameter specifies the ADD number of the ATMLOGICPO upper-level RT(Optional) logical port that carries the logical port to be added. A cell can belongs to multiple URAs. This parameter indicates the ID of the first URA that the cell belongs to. The URA is used only ADD by the UTRAN QUICKCELLS and not known by ETUP(Mandato the CN. When the ry) UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.

Interval Type

128~447

AEUa(128~ 191),AOUa( 256~383),U OIa(384~44 7)

Interval Type

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第1068页,共3267页

162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the second URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the third URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.

文档密级:

URA2

URA ID 2

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

URA3

URA ID 3

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第1069页,共3267页

162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the fourth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the fifth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.

文档密级:

URA4

URA ID 4

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

URA5

URA ID 5

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第1070页,共3267页

162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the sixth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the seventh URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.

文档密级:

URA6

URA ID 6

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

URA7

URA ID 7

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第1071页,共3267页

162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the eighth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. ID of the URA in a cell. The URA is only used by the UTRAN and the CN does not know the URA. The URA consists of multiple cells. When the UE enters the URAPCH state, the location of the UE is identified with the URA ID. For details, refer to the 3GPP TS 25.331 protocol. Number of UTRAN Registration Areas (URAs) which the cell belongs to.

文档密级:

URA8

URA ID 8

ADD QUICKCELLS ETUP(Mandato ry)

Interval Type

0~65535

0~65535

URAId

URA ID

ADD URA(Mandator y) ADD CELLURA(Ma ndatory) ADD NRNCURA(Ma ndatory)

Interval Type

0~65535

0~65535

URANUM

ADD QUICKCELLS URA number ETUP(Mandato ry)

D1, D2, D1, D2, Enumeratio D3, D4, D5, D3, D4, D5, n Type D6, D7, D8 D6, D7, D8

8/7/2013

华为机密,未经许可不得扩散

第1072页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only

文档密级:

Inter-freq CS Used UsedFreqCST frequency hdEcN0 trigger Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第1073页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only

文档密级:

Inter-freq CS Used UsedFreqCST frequency hdRSCP trigger RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第1074页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only

文档密级:

Inter-freq H Used UsedFreqHTh frequency dEcN0 trigger Ec/No THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第1075页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only

文档密级:

Inter-freq H Used UsedFreqHTh frequency dRSCP trigger RSCP THD

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-115~-25

-115~-25

8/7/2013

华为机密,未经许可不得扩散

第1076页,共3267页

162734118.xls.ms_office1
This parameter configures the used frequency measurement quantity to trigger the inter-RAT measurement for the purpose of Qos-based handover. The parameter is valid when the event reporting mode is ADD selected for inter3A Used-Freq CELLQOSHO( RAT. CPICH_EC/ UsedFreqMea Measure Optional) Ec/No: signal-toCPICH_EC/ Enumeratio NO, sQuantityFor Quantity for SET noise ratio NO,CPICH n Type CPICH_RS Qos3A Qos QOSHO(Option RSCP: received _RSCP CP al) signal code power CPICH_Ec/NO: the measurement quantity used for event 2D and 2F, with unit of dB CPICH_RSCP: the measurement quantity used for event 2D and 2F, with unit of dBm The RNC, in the coverage-based inter-RAT

文档密级:

8/7/2013

华为机密,未经许可不得扩散

第1077页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency Interval measure report Type mode] is set to EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event

文档密级:

ADD CELLINTERFR EQHOCOV(Op tional) SET Inter-freq R99 INTERFREQH PS Used OCOV(Optional UsedFreqR99 frequency ) PsThdEcN0 trigger Ec/No ADD THD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-24~0

-24~0

8/7/2013

华为机密,未经许可不得扩散

第1078页,共3267页

162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency Interval measure report Type mode] is set to EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event

文档密级:

ADD CELLINTERFR EQHOCOV(Op tional) SET Inter-freq R99 INTERFREQH PS Used OCOV(Optional UsedFreqR99 frequency ) PsThdRSCP trigger RSCP ADD THD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

-115~-25

-115~-25

USEFE

ADD This parameter Disable, Use FE or not NODEBESN(M specifies whether Enumeratio Enable andatory) to use FE or not. n Type

Disable, Enable

UseMacehs

Mac-ehs use flg

SET HSSCCHLESS OPPARA(Mand atory)

This parameter specifies whether Enumeratio NOTUSED, NOTUSED, the Mac-ehs n Type USED USED entity is applied.

8/7/2013

华为机密,未经许可不得扩散

第1079页,共3267页

162734118.xls.ms_office1

文档密级:

USEMP

ADD This parameter Disable, Use MP or not NODEBESN(M specifies whether Enumeratio Enable andatory) to use MP or not. n Type

Disable, Enable

This parameter Use the ADD specifies whether Disable, USENBLB2 second Serial NODEBESN(O Enumeratio to use the second Enable Number or not ptional) n Type ESN or not.

Disable, Enable

UseOfHcs

Use of HCS

ADD CELLHCS(Opti onal) ADD GSMCELL(Opt ional) ADD NRNCCELL(O ptional)

Indicating whether HCS is USED, USED, used. For details, Enumeratio NOT_USE NOT_USE refer to 3GPP TS n Type D D 25.304.

USEPPP

Use PPP or not

ADD This parameter Disable, NODEBESN(M specifies whether Enumeratio Enable andatory) to use PPP or not. n Type

Disable, Enable

8/7/2013

华为机密,未经许可不得扩散

第1080页,共3267页

162734118.xls.ms_office1
The ratio of the users which could launch the handover to interRAT neighbour cell. When the parameter is ALL_USER, it means all of the users could be handover to the inter-RAT ALL_USER neighbour cell. (All User), ADD When the HALF(Half ALL_USER CELLMBDRIN parameter is ), UserPercenta UserPercentag Enumeratio ,HALF,THI TERRAT(Optio HALF, it means THIRD(TH ge e n Type RD, nal) only 1/2 of the IRD), QUARTER users could be QUARTER handover to the (QUARTE inter-RAT R) neighbour cell. When the parameter is THIRD, it means only 1/3 of the users could be handover to the inter-RAT neighbour cell. When the parameter is Percentage of SET Percentage of User Plane USERPLNSHA User Plane UserPlnShari Sharing Out REPARA(Optio Sharing Out ngOutOffset Offset nal) Offset.

文档密级:

Interval Type

5~20

5~20

Percentage of SET Percentage of User Plane USERPLNSHA User Plane UserPlnShari Sharing Out REPARA(Optio Sharing Out ngOutThd threshold nal) threshold.

Interval Type

50~100

50~100

8/7/2013

华为机密,未经许可不得扩散

第1081页,共3267页

162734118.xls.ms_office1
SET SCHEDULEPR IOMAP(Mandat ory) SET USERGBR(Ma ndatory) SET FACHBANDW IDTH(Mandator y) SET USERHAPPYB R(Mandatory)

文档密级:

UserPriority

User Priority

This parameter specifies the user priority. The user GOLD, classes in Enumeratio SILVER, descending order n Type COPPER of priority are Gold, Silver, and then Copper.

GOLD, SILVER, COPPER

Use TRUNK USETRUNK or not

This parameter ADD specifies whether Disable, NODEBESN(M Enumeratio to use TRUNK or Enable andatory) n Type not.

Disable, Enable

UT

Rate unit

This parameter ADD specifies the unit CELL/S, ATMTRF(Opti of the peak rate, Enumeratio KBIT/S onal) average rate, and n Type minimum rate.

CELL/S, KBIT/S

VCI

Bearing VCI

VCI of the PVC ADD from which the Interval AAL2PATH(M AAL2 Path goes Type andatory) out of the RNC.

32~65535

32~65535

8/7/2013

华为机密,未经许可不得扩散

第1082页,共3267页

162734118.xls.ms_office1

文档密级:

VCLTYPE

This parameter ACT CC, CC, specifies the type VCL act type VCLCC(Manda Enumeratio LOOPBAC LOOPBAC of check on the tory) n Type K K VCL.

VLANFlAG

ADD SCTPLNK(Opti onal) VLANID Flag VLAN ID flag. ADD IPPATH(Option al)

DISABLE, DISABLE, Enumeratio ENABLE ENABLE n Type

8/7/2013

华为机密,未经许可不得扩散

第1083页,共3267页

162734118.xls.ms_office1

文档密级:

VLANID

VLAN ID

ADD VLANID(Mand atory) ADD IPPATH(Manda tory) ADD SCTPLNK(Man datory) ADD ETHMA(Mand atory)

This parameter specifies the VLAN ID of the destination IP address.

Interval Type

2~4094

2 to 4094

VLANPRI

VLAN Priority

SET This parameter DSCPMAP(Opt specifies the ional) VLAN priority.

Interval Type

0~7

0 to 7

8/7/2013

华为机密,未经许可不得扩散

第1084页,共3267页

162734118.xls.ms_office1

文档密级:

VOICEDL

AMR voice service downlink factor

ADD AMR voice Interval TRMFACTOR( service downlink Type Optional) factor.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第1085页,共3267页

162734118.xls.ms_office1

文档密级:

AMR voice VOICEPRIP primary path ATH

ADD AMR voice TRMMAP(Opti primary path. onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF

AMR voice VOICEPRIT pri path load H threshold

ADD AMR voice Interval LOADEQ(Opti primary path load Type onal) threshold.

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第1086页,共3267页

162734118.xls.ms_office1

文档密级:

ADD AMR voice AMR voice VOICESECP TRMMAP(Opti secondary path secondary path. ATH onal)

CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL

CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL

VOICESEC WHT

AMR voice pri sec path load ratio threshold

AMR voice ADD primary LOADEQ(Opti secondary path onal) load ratio threshold.

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第1087页,共3267页

162734118.xls.ms_office1

文档密级:

VOICEUL

AMR voice ADD AMR voice service uplink TRMFACTOR( service uplink factor Optional) factor.

Interval Type

0~100

0~100

This parameter specifies the channel type of VoIP services. - DCH: Both uplink and downlink are DCH(UL_D preferably carried CH,DL_DC on DCH. SET H), DCH, - HSDPA: Uplink VOIP channel FRCCHLTYPE HSDPA(UL VoipChlType Enumeratio HSDPA, is preferably type PARA(Optional _DCH,DL_ HSPA carried on DCH, n Type ) HSDSCH), and downlink is HSPA(UL_ preferably carried EDCH,DL_ on HS-DSCH. HSDSCH) - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried This parameter SET decides E-DCH FRC(Optional) TTI type for VOIP traffic.

HSUPA TTI type of VOIP VoipHsupaTti traffic

EDCH_TTI Enumeratio _10ms, n Type EDCH_TTI _2ms

EDCH_TTI _10ms, EDCH_TTI _2ms

8/7/2013

华为机密,未经许可不得扩散

第1088页,共3267页

162734118.xls.ms_office1
This parameter Enable Alarm specifies whether ADD VOL24_MAS Reporting for the alarm EMU(Optional) K 24V Power reporting for 24 V power is enabled. This parameter Upper Limit specifies the ADD VOL24_THD of Alarm for upper threshold EMU(Optional) _HIGH 24V Power for 24 V power alarm. This parameter Lower Limit specifies the ADD VOL24_THD of Alarm for lower threshold EMU(Optional) _LOW 24V Power for 24 V power alarm. This parameter Enable Alarm specifies whether ADD VOL48_MAS Reporting for the alarm EMU(Optional) K 48V Power reporting for 48 V power is enabled. This parameter Upper Limit specifies the ADD VOL48_THD of Alarm for upper threshold EMU(Optional) _HIGH 48V Power for 48 V power alarm. This parameter Lower Limit specifies the ADD VOL48_THD of Alarm for lower threshold EMU(Optional) _LOW 48V Power for 48 V power alarm. This parameter ADD Cross connect specifies the VPCLCXN VPCLCX(Optio index index of a cross nal) connection.

文档密级:

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n) 1~9 character

String Type -

String Type -

1~9 character

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n) 1~9 character

String Type -

String Type -

1~9 character

Interval Type

0~1399

0 to 1399

VPI

Bearing VPI

VPI of the PVC ADD from which the AAL2PATH(M AAL2 Path goes andatory) out of the RNC.

Interval Type

0~255

0~255

8/7/2013

华为机密,未经许可不得扩散

第1089页,共3267页

162734118.xls.ms_office1
This switch defines whether a video phone is barred in a cell. If a video phone is allowed in a confidential zone such as a military exclusive zone, the phone can be used for shoot in the confidential zone. Therefore, the operator can reject video phone services in the cell by enabling the switch. When the parameter is set to YES, the QOS control algorithm is used for VP services. When the parameter is set to NO, the QOS control algorithm is not used for VP services.The QOS action of VP services only includes inter frequency handover. Threshold of VP call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of VP call release is higher than the related threshol, the KPI alarm of VP call drop ratio is reported.

文档密级:

VPLimitInd

ADD QUICKCELLS ETUP(Optional) ADD Cell VP limit CELLSETUP(O indicator ptional) ADD NRNCCELL(O ptional)

TRUE, Enumeratio FALSE n Type

TRUE, FALSE

SET QOS Switch VPQosPerfor QOSACT(Optio For VP Traffic m nal)

Enumeratio NO, YES n Type

NO, YES

Threshold of VpRabAbnor VP Call Drop mRelRatioTh Ratio d

SET KPIALMTHD( Optional)

Interval Type

0~100

0~100

8/7/2013

华为机密,未经许可不得扩散

第1090页,共3267页

162734118.xls.ms_office1

文档密级:

The minimum number of VP RAB establish request per SPU to report KPI alarm. In a checking period,if Minimum the number of VP SET Number of VP RAB establish Interval VpRabEstAtt KPIALMTHD( RAB Establish request is higher Type MinNum Optional) Request than the threshold and the VP RAB setup successful ratio is lower than this threshold,the KPI alarm of VP RAB setup ratio is reported. Threshold of VP RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower Threshold of SET than this VP RAB Setup VpRabEstSuc KPIALMTHD( threshold and the Successful cRatioThd Optional) number of VP Ratio RAB establish request is higher than the related threshold,the KPI alarm of VP RAB setup ratio is reported. The minimum number of VP call release per SPU to report KPI alarm.In a checking period, if the number of Minimum SET VP call release is VpRabRelMi Number of VP KPIALMTHD( higher than the nNum Call Release Optional) related threshold and the VP call drop ratio is higher than this threshold, the KPI alarm of VP call drop ratio is reported.

0~65534

0~65534

Interval Type

0~100

0~100

Interval Type

0~65534

0~65534

8/7/2013

华为机密,未经许可不得扩散

第1091页,共3267页

162734118.xls.ms_office1
Timer for triggering a second adjustment of the UL WAMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL WAMR mode Wait Timer SET adjustment when WAmrUlRate For WAMR QOSACT(Optio the associated AdjTimerLen Uplink nal) command is delivered. The UL WAMR rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL This parameter Enable Water specifies whether ADD WATER_MA Alarm the alarm EMU(Optional) SK Reporting reporting for water is enabled.

文档密级:

Interval Type

20~64000

20~64000

CLOSE(Clo Enumeratio se), CLOSE,OP n Type OPEN(Ope EN n)

8/7/2013

华为机密,未经许可不得扩散

第1092页,共3267页

162734118.xls.ms_office1
This parameter is used to determine the relative threshold of the soft handover based on the measurement of each cell in the active set. The larger the value of the parameter is, the higher the relative threshold ADD is under the same CELLINTRAF conditions. When REQHO(Option Weight is set to 0, Interval al) the SHO relative Type SET threshold depends INTRAFREQH on only the best O(Optional) cell of the active set. For the definition, refer to 3GPP TS 25.331. When the parameter equals 0, the general quality of the active set is the measurement of the best cell and the SHO relative threshold depends

文档密级:

Weight

Weighted factor

0~20

0~2,Step:0. 1

8/7/2013

华为机密,未经许可不得扩散

第1093页,共3267页

162734118.xls.ms_office1
Weight used for computing frequency general quality. The larger the value of this parameter, the higher the calculated general quality of the active set. When this parameter is set to 0, the general quality of the active set is the quality of the best cell in the active set. For details about this parameter, refer to the subsection of frequency quality estimation in the section of inter-frequency measurement in 3GPP TS 25.331. This parameter is used for all eventtriggered interfrequency measurements, Size of the sliding window.It can be used to control the transmission rate of the peer end.

文档密级:

Weight for WeightForUs Used edFreq frequency

ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)

Interval Type

0~20

0~2,Step:0. 1

Receiving WINDOWSI window size ZE

ADD SAALLNK(Opt ional)

Interval Type

1~32767

1~32767

WKMODE

Work mode

ADD Work mode of M3LKS(Option M3UA link set. al)

M3UA_AS P, M3UA_IPS M3UA_AS P Enumeratio P, (For details n Type M3UA_IPS of ASP and P IPSP, refer to RFC4666.)

8/7/2013

华为机密,未经许可不得扩散

第1094页,共3267页

162734118.xls.ms_office1

文档密级:

Work area WORKAREA flag

Active(For This parameter FMT mat active specifies the flag DATA(Optional Enumeratio area), Active,Stan of the workspace ) n Type Standby(For dby to be formatted. mat standby area)

WORKMOD Work Mode E

This parameter specifies the work E1_UNBA( mode. The setting E1 E1_UNBA, SET of this parameter Unbalance), Enumeratio E1_BA, T1, E1T1(Optional) should be E1_BA(E1 n Type E1 consistent with Balance), that at the peer T1(T1), end. E1(E1)

WTRT

WTR Time

This parameter SET specifies the time Interval MSP(Optional) to wait before the Type restoration.

30~60000

30 to 60000

8/7/2013

华为机密,未经许可不得扩散

第1095页,共3267页

162734118.xls.ms_office1
This parameter specifies the X offset for connected mode. For a PTM service in a cell, X UEs that receive this service need to SET retain in RNCMBMSPA connected mode, RA(Optional) so as to reduce triggering of counting on the Uu interface during recounting. The value of X = [PARA]NCountin gThd[/PARA] + [PARA] For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizing indicates that the resources SET are insufficient in COIFTIMER(O the cell. The ptional) service may run at a rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s service of the UE is released after the timer expires. If the length is set to 0, the timer is not started.

文档密级:

XOffset

X Offset

Interval Type

1~5

1~5

Release 0 kbit/s Timer ZeroRateUpF length for ailToRelTime failed to rate rLen up

Interval Type

0~65535

0~65535

8/7/2013

华为机密,未经许可不得扩散

第1096页,共3267页

162734118.xls.ms_office1
GMT1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMTThis parameter 09:00), specifies the time GMTEnumeratio zone where the 0800(GMTn Type RNC located. 08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMTGMT1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMT09:00), GMT0800(GMT08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMT-

文档密级:

ZONET

TimeZone

SET TZ(Optional)

8/7/2013

华为机密,未经许可不得扩散

第1097页,共3267页

162734118.xls.ms_office1

文档密级:

Unit

Default Value Recommended Value Impact Parameter ServiceRelationship Interrupted During Interruption Modification Interruption Scope Duration(Min) Caution N (No impact on the UE in idle mode) The parameter modificatio n has no impact on

None

-

None

AAL2 Path

None

AAL2 Path

Not involved

s

-

None

RNC

None

0

0

Cell

None

0

0

Cell

None

0

0

Cell

None

0

0

Cell

This paramter must be configured when [PARA]Re HostPolicy[/ PARA] is set to REHOSTD ELAY. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

N (Impact on random Not access for involved UEs in idle mode)

Not involved

N (Impact on random Not access for involved UEs in idle mode)

Not involved

N (Impact on random Not access for involved UEs in idle mode)

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1098页,共3267页

162734118.xls.ms_office1
The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML].

文档密级:

None

0

0

Cell

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

0

0

Cell

N (Impact on random Not access for involved UEs in idle mode)

Not involved

None

0

0

Cell

N (Impact on random Not access for involved UEs in idle mode)

Not involved

None

-

None

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

Enable

Enable

PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1099页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

100

RNC

When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1100页,共3267页

162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M

文档密级:

None

-

AC0:BARR ED,AC1:B ARRED,A C2:BARRE D,AC3:BA RRED,AC4 :BARRED, AC5:BARR ED,AC6:B ARRED,A RNC C7:BARRE D,AC8:BA RRED,AC9 :BARRED( SET DSACAUT OALGO) None(ADD CELLDSA CMANUA LPARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1101页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF lexible,no need set AcRestricti on value.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1102页,共3267页

162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M

文档密级:

s

-

10(SET DSACAUT OALGO) 30(SET ACALGO) RNC None(ADD CELLDSA CMANUA LPARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1103页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

2

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The deleting operation can be done three minutes after ADD GPS operation.

8/7/2013

华为机密,未经许可不得扩散

第1104页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

None

RNC

None

Y

Subsystem

CPU usage Less than to be 10 minutes increased.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

ACTIVE

ACTIVE

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

NODELIV RNC ERY

None

N (no impact on the UE in idle mode)

Not involved

Not involved

None

-

UE_BASE RNC D

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The deleting operation can be done three minutes after ADD GPS operation.

8/7/2013

华为机密,未经许可不得扩散

第1105页,共3267页

162734118.xls.ms_office1
1. When the value of [PARA]AG PSRECEIV ERTYPE[/P ARA] in [MML]AD D GPS[/MML ] is set to RNC, the GPS data report period, DGPS data report Not period, involved AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set. 1. When the value of [PARA]AG PSRECEIV

文档密级:
1. The AGPS reference receiver can be added to an RNC or a NodeB according to [AGPS type]. If the AGPS type is RNC, the AGPS reference receiver is added to the RNC. If the AGPS type is NodeB, the AGPS reference receiver is added to the NodeB. 2. One RNC can be configured with one AGPS reference receiver at most while

None

-

None

RNC

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1106页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-6

-6

Cell

None

N (Impact on acquisition Not indicator involved receiving of UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1107页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC(SET BOXRPT,S ET ALMLVL) None SRB(SET ALMPORT )

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

kbit/s

-

None

When [PARA]BW MODE[/PA RA] in [MML]AD D RSCGRP[/ MML] is set to HALF_DU PLEX, this parameter is valid;if the [PARA]BW MODE[/PA Transmissio RA] in n resource [MML]AD group D RSCGRP[/ MML] of upper class and lower class RSCGRP is set to HALF_DU PLEX, the [PARA]All Bw[/PARA] in [MML]AD D

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1108页,共3267页

162734118.xls.ms_office1

文档密级:

None

Automatic

Automatic

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

RNC

When the value of [PARA]PG PSRECEIV ERTYPE[/P ARA] in [MML]AD D GPS[/MML ] is selected, the ALTITUDE should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1109页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

4(ADD CELLINTE RFREQHO COV) 4 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1110页,共3267页

162734118.xls.ms_office1

文档密级:

None

1(ADD CELLINTE RFREQHO NCOV) 1 -(SET INTERFRE QHONCOV )

Cell(ADD CELLINTE RFREQHO NCOV) None RNC(SET INTERFRE QHONCOV )

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1111页,共3267页

162734118.xls.ms_office1

文档密级:

None

4(ADD CELLINTE RRATHOC OV) 4 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1112页,共3267页

162734118.xls.ms_office1

文档密级:

None

1(ADD CELLINTE RRATHON COV) 1 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) None RNC(SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1113页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

40

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1114页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

200

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1115页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

3000

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1116页,共3267页

162734118.xls.ms_office1
The adjacent node is already configured by [MML]AD D ADJNODE[ /MML]. When the value of [PARA]LN KT[/PARA] in [MML]AC Not T involved VCLCC[/M ML] is set to AAL2PAT H, the adjacent node ID should be set. When the value of [PARA]LN KT[/PARA] in [MML]LOP

文档密级:

None

-

None

Adjacent Node(ACT VCLCC,A DD ADJMAP,A DD ADJNODE) AAL2 Path(LOP VCL,ADD AAL2PAT H) Services carried on the network element with the specific ATM address.(A DD AAL2RT) IP Path(ADD IPPATHBI ND,ADD IPPATH) IP path(ACT IPPM)

Not involved

Not involved

This parameter cannot be modified.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1117页,共3267页

162734118.xls.ms_office1

文档密级:

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1118页,共3267页

162734118.xls.ms_office1

文档密级:

second

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1119页,共3267页

162734118.xls.ms_office1

文档密级:

second

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SCTP

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1120页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

ALL

ALL

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

Primary

Primary

RNC

When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] Step_by_Ste p, the value of [PARA]AR EAFLAG[/ PARA] should be

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1121页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1122页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

3

3

Ethernet Port

When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Y ML] is set to ARP, the ARP packet resend times should be set.

Interrupt the service until the correct The service gateway is on the set or the Ethernet port Port. swapping or the changing of IP route is finished.

In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.

8/7/2013

华为机密,未经许可不得扩散

第1123页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Not IPCHK[/M involved ML] is set to ARP, the ARP packet out-time should be set.

文档密级:
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. The parameter modificatio n has no impact on the equipment. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.

ms

3

3

Ethernet Port

Not involved

Not involved

None

-

None

NodeB

None

Not involved

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to ATMTRAN S_IP or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1124页,共3267页

162734118.xls.ms_office1

文档密级:
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to ATMTRAN S_IP or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

ALLOWED ALLOWED RNC

ATT needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN; ATT does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.

N (For the UE in idle mode, indicating whether the Not MS can involved apply the IMSI attach/detac h procedure)

Not involved

The modificatio n of ATT is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1125页,共3267页

162734118.xls.ms_office1
When the value of [PARA]AU THTYPE[/ PARA] in PPP [MML]AD Link(ADD D PPPLNK) PPPLNK[/ MLPPP Y MML] is set Group, PPP to PAP_V Link(ADD or MPGRP) CHAP_V, the AUTHMO DE should be set.

文档密级:

None

-

None

PPP link

The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device.

None

-

None

PPP Link(ADD PPPLNK) MLPPP None Group, PPP Link(ADD MPGRP)

Y

PPP link

The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device. The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device. The negotiation will be successful only when the parameter is set the same with the local and peer device.

None

-

None

PPP Link(ADD PPPLNK) MLPPP None Group, PPP Link(ADD MPGRP)

Y

PPP link

None

NO_V

NO_V

PPP Link(ADD PPPLNK) MLPPP None Group, PPP Link(ADD MPGRP)

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1126页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ENABLE

Ethernet port

When the value of [PARA]PT YPE[/PAR A] in [MML]SET Y ETHPORT[ /MML] is set to FE,the self-confer parameter is valid.

Port

The modificatio n may affect the state of If the mode the port, is not may consistent, interrupt will service interrupt temply. If service until the it is modificatio consistent. n is not consistent, service may be interrupted.

None

7

7

Physical channel

[PARA]Ava ilablesignat ureEndInde x[/PARA] should be less than the number of preamble signatures. The preamble signature is configured by [PARA]Pre ambleSignat ures[/PARA ].

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1127页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Physical channel

[PARA]Ava ilablesignat ureStartInde x[/PARA] should be no greater than [PARA] Availablesi gnatureEndI ndex [/PARA].

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

15

15

Physical channel

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1128页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified.

None

-

None

SRB

None

Not involved

Not involved

Not involved

None

-

None

subrack

When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML ] is set to Y RSS, the value of [PARA]BA CK8KCLK SW1[/PAR A] could be set.

RNC

Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz Less than 5 clock switch minutes of the backplane cannot be turned on for multiple interface boards at the same time. Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz Less than 5 clock switch minutes of the backplane cannot be turned on for multiple interface boards at the same time.

None

-

None

subrack

When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML ] is set to Y RSS, the value of [PARA]BA CK8KCLK SW2[/PAR A] could be set.

RNC

8/7/2013

华为机密,未经许可不得扩散

第1129页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

61

61

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to STANDBY, the backup port IP address should be set.

Not involved

Not involved

In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.

8/7/2013

华为机密,未经许可不得扩散

第1130页,共3267页

162734118.xls.ms_office1
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to STANDBY, the backup port mask should be set. N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)

文档密级:

None

-

None

Ethernet port

Not involved

Not involved

In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. This parameter cannot be modified. This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

None

-(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU P) GSM900_D CS1800_B AND_USE D(ADD GSMCELL)

None(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU Cell P) GSM900_D CS1800_B AND_USE D(ADD GSMCELL)

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1131页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

CONVERS ATIONAL: 7; STREAMI NG:8; RNC INTERACT IVE,BACK GROUND: 64

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1132页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1133页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-30

-30

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-20

-20

Transport channel

None

N (Impact on cell system Not message involved receiving of UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1134页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

5

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

2

2

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

1

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1135页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D384

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1136页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1137页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1138页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct2[/PA RA] and [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] is set to None; [PARA]Be DlAct2[/PA RA] and [PARA]Be DlAct3[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None;

文档密级:

None

-

RateDegrad RNC e

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1139页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct2[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] is set to None; [PARA]Be DlAct2[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None; [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be

文档密级:

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1140页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] or [PARA]Be DlAct2[/PA RA] is set to None; [PARA]Be DlAct3[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None. [PARA]Be DlAct3[/PA RA] must

文档密级:

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1141页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2Cpc TvmThd[/P ARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1142页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]Be EFach2DTv mThd[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1143页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2HTv mThd[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1144页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1145页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2CpcTvm Thd[/PARA ].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1146页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]F2 DTvmThd[/ PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1147页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1148页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2HTvmTh d[/PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1149页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1150页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

65535

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1151页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1152页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D1000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1153页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2HTvmTh d[/PARA]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2HTv mThd[/PAR A]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2Cpc TvmThd[/P ARA]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2CpcTvm Thd[/PARA

文档密级:

byte

-

D64

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D5000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1154页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D1440

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

20

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

10(ADD CELLDCC C) 10 -(SET DCCC)

This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1155页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

YES

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

None

-

None

RAB

At least one of this parameter and the [PARA]Bet aD[/PARA] parameter must be set to 15. At least one of this parameter and the [PARA]Bet aC[/PARA] parameter must be set to 15.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1156页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct2[/PA RA] and [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] is set to None; [PARA]Be UlAct2[/PA RA] and [PARA]Be UlAct3[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None;

文档密级:

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1157页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct2[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] is set to None; [PARA]Be UlAct2[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None. [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be

文档密级:

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1158页,共3267页

162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] or [PARA]Be UlAct2[/PA RA] is set to None; [PARA]Be UlAct3[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None. [PARA]Be UlAct3[/PA RA] must

文档密级:

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1159页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

SINGLE

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

YES

RNC

None

-

YES

RNC

Valid only when [PARA]BE QosPerform [/PARA] is set to YES and [PARA]Be UlEvTrigIn d[/PARA] is set to SINGLE. Valid only when [PARA]BE QosPerform [/PARA] is set to YES and [PARA]Be UlEvTrigIn d[/PARA] is set to SINGLE.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1160页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

3000

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

3

3

When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Current IPCHK[/M BFD Not ML] is set communicat involved to SBFD or ion. MBFD, the times of outtime of BFD packet should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1161页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]BG MBR[/PAR A] >= [PARA]BG GBR[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]BG MBR[/PAR A] >= [PARA]BG GBR[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1162页,共3267页

162734118.xls.ms_office1

文档密级:

dB

100

100

Cell

The value of this parameter must satisfy the following relationship relationship: [PARA][Bg nAbnormal Thd]>=[Bg nUpdateThd ][/PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

120

120

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1163页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

06&00&00 Cell

The value of this parameter must satisfy the following relationship relationship: [PARA]Bg nEndTime[/ PARA] >[PARA]M BgnStartTi me[/PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1164页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1165页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

01&00&00 Cell

The value of this parameter must satisfy the following relationship relationship: [PARA]Bg nEndTime[/ PARA] >[PARA]M BgnStartTi me[/PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

ON

ON

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1166页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

5

5

Cell

The value of this parameter must satisfy the following relationship relationship: [PARA][Bg nAbnormal Thd]>=[Bg nUpdateThd ][/PARA] . This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_DC H. The setting of the [PARA]Sir AdjustStep[ /PARA] parameter is associated with this parameter. Assume that this parameter is changed from BLERqualit y1 to BLERqualit y2 and [PARA]Sir AdjustStep[ /PARA] is

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1167页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

D2

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1168页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D250

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

This paramter is valid only N (No when is impact on [PARA]Bli the UE in ndHoFlag[/ idle mode) PARA] set to TRUE.

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1169页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92

-92

Cell

This paramter is valid only when [PARA]Bli ndHOFlag[/ PARA] is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dBm

-115(ADD CELLINTR AFREQHO ) -115 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1170页,共3267页

162734118.xls.ms_office1

文档密级:
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Board

None

Not involved

Not involved

Not involved

None

-

None

Board

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1171页,共3267页

162734118.xls.ms_office1

文档密级:

None

REQUIRE D(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV,ADD REQUIRE CELLINTE D RRATHON COV) -(SET INTERRAT HOCOV,SE T INTERRAT HONCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV,ADD CELLINTE None RRATHON COV) RNC(SET INTERRAT HOCOV,SE T INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

E1/T1 link

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Y

Cell

Less than 5 None . minutes

None

-

None

E1T1 Link

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1172页,共3267页

162734118.xls.ms_office1
When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] is set to Step_by_Ste p, the value of [PARA]BT[ /PARA] should be None

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

None

-

None

board

Y

RNC

None

-

None

E1T1 link

None

Not involved

Not involved

This Less than 5 parameter minutes cannot be modified. If a link is used, you cannot Not convert the involved link from E1 to T1, or from T1 to E1.

None

-

None

board

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]BT[ /PARA] in [MML]AD D IMAGRP[/ Not MML] is set involved to AEUa or AOUa, the IMA group number should be set. Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Correspondi ng optical None port

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1173页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

None

OFF

OFF

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, the MAXBW and MINBW Not should be involved set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to OFF, the CIR should be set.

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP Not ORT[/MML involved ] is set to ON, it may impact current users and bring flow control.

The auto adjust bandwidth parameter can be enabled only when the IPPATH over the logic port activate the IPPM function.

8/7/2013

华为机密,未经许可不得扩散

第1174页,共3267页

162734118.xls.ms_office1

文档密级:
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

kbit/s

0

0

PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) None UNILNK(A DD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1175页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1176页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1177页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1178页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1179页,共3267页

162734118.xls.ms_office1

文档密级:
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

kbit/s

0

0

PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) None UNILNK(A DD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1180页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1181页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1182页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1183页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1184页,共3267页

162734118.xls.ms_office1

文档密级:
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) kbit/s 0 0 UNILNK(A None DD UNILNK) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) Not involved Not involved Not involved

8/7/2013

华为机密,未经许可不得扩散

第1185页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1186页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1187页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1188页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

120

120

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1189页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

When [PARA]GR PT[/PARA] in Transmissio [MML]AD n resource D group RSCGRP[/ MML] is set to IP, this parameter is valid. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

25

25

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

SYS_LEVE L:ON NODEB_L RNC EVEL:ON CELL_LEV EL:ON

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1190页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

s

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

NONE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.

The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.

None

NULL

NULL

IP Path

None

Y

IP Path

The parameter modificatio Less than 5 n has no minutes impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1191页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to FRAATM, the CARRYFR AATMLNK is required. When the value of [PARA]CA RRYT[/PA RA] is set to FRAATM, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D

文档密级:

IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1192页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to IMA, the CARRYIM AGRPN is required. When the value of [PARA]CA RRYT[/PA RA] is set to IMA, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to IMA, this

文档密级:

IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

NodeB

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1193页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to NCORT, the CARRYNC OPTN is required. When the value of [PARA]CA RRYT[/PA RA] is set to NCOPT, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is

文档密级:

IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H)

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1194页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is SAAL(AD valid. D When the SAALLNK) value of AAL2 [PARA]CA Path(ADD RRYT[/PA AAL2PAT RA] in H) [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is When the value of [PARA]CA RRYT[/PA RA] is set to IMA, SAAL UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is LGC port None

文档密级:

None

-

None

Not involved

Not involved

Not involved

This parameter is the bearing slot number and cannot be modified.

None

-

None

Not involved

Not involved

Not involved

This parameter is the bearing subrack number and cannot be modified.

None

-

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1195页,共3267页

162734118.xls.ms_office1
When the value of [PARA]Rsc MngMode[/ PARA] in [MML]AD D NODEB[/M ML] of the resource correspondi ng NodeB is set to EXCLUSIV E, the AAL2PAT Y H must carry on ATMLGCP ORT or RSCGRP 1. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to IMA, the bearing

文档密级:

AAL2 Path(ADD AAL2PAT H) None None SAAL(AD D SAALLNK) IPoA PVC(ADD IPOAPVC)

The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1196页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to UNI, the CARRYUN ILNKN is required. When the value of [PARA]CA RRYT[/PA RA] is set to UNI, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, this When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is

文档密级:

IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SAAL(AD D SAALLNK) IPoA PVC(ADD IPOAPVC)

Y

Services carried on the SAAL link

The services are interrupted until the SAAL link is working normally.

The configuratio n data must be consistent with that of the peer end.

8/7/2013

华为机密,未经许可不得扩散

第1197页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is When the value of [PARA]CA RRYT[/PA RA] is set to ATMLGCP ORT, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to ATM logic port, this parameter is

文档密级:

None

-

None

SAAL(AD D SAALLNK) IPoA PVC(ADD IPOAPVC)

Y

Services carried on the SAAL link

The services are interrupted until the SAAL link is working normally.

The configuratio n data must be consistent with that of the peer end.

IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H)

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Subsystem

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Subsystem

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1198页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. 1. Cell ID is in one-toone corresponde nce with Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLMN-Id (Public Land Mobile Network Identity) is configured through the command [MML]AD D CNOPERA TOR[/MML ] and LAC (Location Area Code) is configured through the

byte

4500

4500

LGC port

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Cell

None

Not involved

Not involved

Not involved

None

-

None

Cell

Before configuring this parameter, you need to configure the information about the common traffic logical channel by running [MML]AD D CTCH[/M ML]. At the same time, you need to set the CBS scheduling parameter of the cell by running [MML]AD D CELLCBS DRX[/MM L].

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1199页,共3267页

162734118.xls.ms_office1

文档密级:
After running the [MML]AD D CBSADDR [/MML] command to add the CBS server address, you should not set this parameter to ON; After setting this parameter to ON, you should not run the [MML]AD D CBSADDR [/MML] command to add the CBS server address. The RNC built-in CBS function is available

None

-

OFF

RNC

None

N (For the UE in idle mode, if this parameter is changed to ON, and the CBS service is configured correctly,the Not CBS involved messages will be received by UE.Otherwi se, the CBS messages will not be received by UE.)

Not involved

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]CC CHMBR[/P ARA] >= [PARA]CC CHGBR[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1200页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]CC CHMBR[/P ARA] >= [PARA]CC CHGBR[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1201页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1202页,共3267页

162734118.xls.ms_office1

文档密级:

ms

1000

1000

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

AUTO

AUTO

PVC

When the value of [PARA]VC LTYPE[/PA RA] in [MML]AC Not T involved VCLCC[/M ML] is set to CC, the activation mode should be

Not involved

Not involved

This parameter cannot be modified.

ms

1000

UNI: 1000 NNI: 200

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ns

1024

1024

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX None using this ATM traffic record index

Not involved

Not involved

Not involved

None

-

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1203页,共3267页

162734118.xls.ms_office1

文档密级:

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1204页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1205页,共3267页

162734118.xls.ms_office1

文档密级:

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

second

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1206页,共3267页

162734118.xls.ms_office1

文档密级:

degree

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

second

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1207页,共3267页

162734118.xls.ms_office1

文档密级:

None

MIXED_E MIXED_E NVIRONM NVIRONM Cell ENT ENT

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

TU

TU

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

SINGLE_H SINGLE_H Cell OST OST

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1208页,共3267页

162734118.xls.ms_office1
Cell(ADD CELLLDB, ADD RESERVE OVSF,ADD PRACHAC TOASCMA P,ADD CELLSELR ESEL,ADD CELLPUC, ADD CELLMEA S,ADD CELLOLC, ADD CELLLDR, ADD CELLLDM, ADD CELLHCS, ADD CELLCAC, ADD CELLALG OSWITCH, ADD CELLACC ESSSTRIC T,ADD CELLMBD RINTERFR

文档密级:

None

-

None

The value of this parameter is dependent on the value of Not [PARA]Cel involved lId[/PARA] in [MML]AD D SMLCCEL L[/MML].

Not involved

Not involved

This parameter cannot be modified.

d

-

10

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

ACTIVE

ACTIVE

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1209页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

UE_ASSIS RNC TED

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

SF8

SF8

Cell

The value of this parameter must not be larger than [PARA]Dl HoCeCode ResvSf[/PA RA] in [MML]AD D CELLCAC[ /MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1210页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

90

90

Cell

The value of this parameter must satisfy the following relationship: [PARA]Cel lOverrunTh d[/PARA] >= [PARA]Cel lUnderrunT hd[/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1211页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

9

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_RESE NOT_RESE Cell RVED RVED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1212页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_RESE NOT_RESE Cell RVED RVED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

AFFECT

AFFECT

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1213页,共3267页

162734118.xls.ms_office1

文档密级:

None

AFFECT

AFFECT

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

45

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1214页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

30

30

Cell

The value of this parameter must satisfy the following relationship: [PARA]Cel lOverrunTh d[/PARA] >= [PARA]Cel lUnderrunT hd[/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1215页,共3267页

162734118.xls.ms_office1
CFG_DL_B LIND_DET ECTION_S WITCH:ON , CFG_HSDP A_64QAM _SWITCH: ON, CFG_HSDP A_MIMO_ SWITCH:O N, CFG_HSPA _DTX_DR X_SWITC RNC H:OFF, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH:O FF, CFG_IMS_ SUPPORT_ SWITCH:O N, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH:OF F,

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1216页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

2

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

CONVOLU CONVOLU Transport TIONAL TIONAL channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1217页,共3267页

162734118.xls.ms_office1

文档密级:
When the network is in poor running status, the number of detection times cannot be set to a small value. If the value is too small, the path status may be affected.

None

5

5

IP Path

When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.

N (No impact on services when the Ping detection succeeds)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC(ADD IPPATHBI ND) None Ethernet port(STR IPCHK)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

NO

NO

SCTP

None

Y

Services that the SCTP link bears

The checksum calculation The should be services are negotiated interrupted with the until the peer end, as SCTP link described in is working RFC4960. normally. The CRC32 is recommend ed.

8/7/2013

华为机密,未经许可不得扩散

第1218页,共3267页

162734118.xls.ms_office1

文档密级:
The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommend ed. The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommend ed. This parameter cannot be modified.

None

NO

NO

SCTP

None

Y

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

None

CRC32

CRC32

SCTP

None

Y

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1219页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1220页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1221页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

TEN_MSE RNC C

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1222页,共3267页

162734118.xls.ms_office1

文档密级:

None

TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1223页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

0

0

Cell(ADD CELLSETU P) None RNC(ADD NRNCCEL L)

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1224页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1225页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

None

N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to OFF, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Y

RNC

If the clock board type is changed from GCGa to GCUa, Less than the clock 10 minutes board should not be configured with GPS.

8/7/2013

华为机密,未经许可不得扩散

第1226页,共3267页

162734118.xls.ms_office1
The services are interrupted until the cell is activated again.

文档密级:

None

False

False

Cell

None

Y

Cell

The cell should be deactivated in advance.

None

UL_DL_B OTH

UL_DL_B OTH

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1227页,共3267页

162734118.xls.ms_office1

文档密级:

None

WALKING _SPEED_A ND_HOT_ SPOT_CEL L(ADD CELLCMC F) -(SET CMCF)

WALKING _SPEED_A ND_HOT_ SPOT_CEL L

Cell(ADD CELLCMC F) None RNC(SET CMCF)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1228页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

CMCF_DL _HLS_SWI TCH:OFF, CMCF_UL _HLS_SWI TCH:OFF, CMCF_UL _PRECFG_ RNC TOLERAN CE_SWITC H:OFF, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH:OFF

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1229页,共3267页

162734118.xls.ms_office1
CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH:OF F, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH:OF F, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL RNC _SWITCH: OFF, CMP_IUR_ SHO_DIVC TRL_SWIT CH:OFF, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H:OFF, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH :OFF,

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC(RST IU,RST IURESOUR CE,ADD CNNODE, ADD CNDOMAI N) RAB(ADD TYPRABB ASIC,ADD CELLRLP WR)

This parameter cannot be set to CS_DOMA IN when the [PARA]Tra Not fficClass[/P involved ARA] parameter is set to INTERACT IVE or BACKGRO UND.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1230页,共3267页

162734118.xls.ms_office1

文档密级:
The CN indexes of the same PLMN even the different CN domain cannot be the same. When the IuFlex function is used, each CN domain (CS/PS) can be configured with up to 32 CN nodes. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

Normal

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Adjacent Node

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1231页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified.

None

-

None

RNC

None This parameter is valid only when [PARA]Cn OpGrpInde x[/PARA] in [MML]AD D CNOPERG ROUP[/M ML] is added. This paramter is valid only when [PARA]Cn OpGrpInde x[/PARA] in [MML]AD D

Not involved

Not involved

Not involved

None

-

None

Cell(ADD QUICKCE LLSETUP, ADD GSMCELL, ADD NRNCCEL L) (ADD CELLSETU P)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1232页,共3267页

162734118.xls.ms_office1
RNC(ADD CELLDSA CMANUA LPARA,AD D SAMBMSP ARA,ADD CBSADDR, ADD URA,ADD NODEB,A DD SAC,ADD RAC,ADD LAC,ADD CELLMBM SSA,ADD MBMSSA, SET OPERATO RCFGPAR A,ADD RNCCBCP UID,ADD IMSIIDNN SCNIDMA P,ADD NRIGLBC NIDMAP,A DD CNNODE,S ET RNC When [PARA]RS CMNGMO DE[/PARA] in [MML]AD D RSCGRP[/ MML] is set to EXCLUSIV E, this parameter is valid. When the value of Not [PARA]CN involved MNGMOD E[/PARA] in [MML]AD D ADJMAP[/ MML] is set to EXCLUSIV E, the operator index should be set. When the None Not involved

文档密级:

None

-

None

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

255

255

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1233页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. When the Iu-Flex function is used, the protocol version of each CN node must be R5 or later.The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

ON

ON

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1234页,共3267页

162734118.xls.ms_office1

文档密级:

None

3

3

Cell

This paramter is valid only when [PARA]Cod eAdjForHsd paSwitch[/P ARA] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-(SET DRD) 13 13(ADD CELLDRD)

If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter RNC(SET set through DRD) the Cell(ADD [MML]AD CELLDRD) D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is valid only

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1235页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter RNC(SET set through DRD) the Cell(ADD [MML]AD CELLDRD) D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is valid only

文档密级:

None

-(SET DRD) SF8 SF8(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1236页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

文档密级:

None

-(SET DRD) OFF OFF(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1237页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

Cell

This paramter is valid only when INTER_FR EQ_HHO_ SWITCH of the [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1238页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ENGLISH

RNC

None

N (For the UE in idle mode, if this parameter is changed, you need to set the Not correspondi involved ng code scheme so that you can correctly receive the CBS messages.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1239页,共3267页

162734118.xls.ms_office1

文档密级:

None

COEXIST_ MEAS_TH D_CHOICE _INTERFR EQ(ADD CELLHOC OMM) -(SET HOCOMM)

COEXIST_ MEAS_TH D_CHOICE _INTERFR EQ

Cell(ADD CELLHOC OMM) None RNC(SET HOCOMM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1240页,共3267页

162734118.xls.ms_office1

文档密级:

dB

20(ADD CELLDCC C) 20 -(SET DCCC)

This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES. When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, CommPlmn UsingType needs to be set.Otherwis e,it does not need. When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NONSUPPORTI RNC NG_UE_O NLY

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

2

2

SAAL

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

s

30

30

SAAL

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

ms

10

10

SAAL

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

8/7/2013

华为机密,未经许可不得扩散

第1241页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

15

IP:15; ATM:20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

15

IP:15; ATM:20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1242页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

15

IP:15; ATM:20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

15

IP:15; ATM:25

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1243页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion

文档密级:

ms

25

25

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1244页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

25

25

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

25

IP:25; ATM:30

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1245页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

25

IP:25; ATM:30

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

25

IP:25; ATM:30

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1246页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. 1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion

文档密级:

ms

25

IP:25; ATM:50

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

50

50

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1247页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r

文档密级:

ms

50

50

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1248页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

Only_To_In ter_Frequen RNC cy

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_ALL NOT_ALL Cell OWED OWED

This parameter is valid only when [PARA]Con nCellBarred [/PARA] is set to BARRED.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1249页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter is used for power monitor.

None

NO

NO

RNC

None

Not involved

Not involved

Not involved

dB

2

2

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1250页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

2

Cell

This parameter is valid only when [PARA]Qu alMeas[/PA RA] is set to CPICH_EC NO.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1251页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

This parameter is valid when [PARA]SIB 12Ind[/PAR A] is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1252页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

This parameter is valid when [PARA]SIB 12Ind[/PAR A] is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1253页,共3267页

162734118.xls.ms_office1

文档密级:

dB

127

127

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1254页,共3267页

162734118.xls.ms_office1

文档密级:

dB

127

127

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1255页,共3267页

162734118.xls.ms_office1

文档密级:

s

D1280

D1280

Cell

This parameter is valid only when [PARA]Con nCellBarred [/PARA] is set to BARRED.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1256页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-20

-20

Physical channel

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1257页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

UE

CONTEXT TYPE needs to be set when [PARA]RS TTYPE[/P ARA] in [MML]RST IUR[/MML ] is set to SINGLE_R Not involved NC; CONTEXT TYPE does not need to be set when [PARA]RS TTYPE[/P ARA] in [MML]RST IUR[/MML ] is set to ALL_RNC.

Not involved

Not involved

This parameter cannot be modified.

None

NO

NO

Ethernet port

None

Not involved

Not involved

Not involved

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1258页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]CO NVMBR[/P ARA] >= [PARA]CO NVGBR[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]CO NVMBR[/P ARA] >= [PARA]CO NVGBR[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1259页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].

文档密级:

kbit/s

WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1260页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. 5 5 Ethernet port None

文档密级:

kbit/s

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1261页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

CountCThre shold needs to be set when [PARA]Cou nterCheckS witch[/PAR A] in [MML]SET CNTCHK[/ MML] is set to ON; CountCThre shold does not need to be set when [PARA]Cou nterCheckS witch[/PAR A] in [MML]SET CNTCHK[/ MML] is set to OFF.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

Cell(ADD CELLSETU CP1_not_S CP1_not_S P) upported upported RNC(ADD NRNCCEL L)

This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1262页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

8

8

Cell

This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1263页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter is based on actual networking. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

UNAVAIL UNAVAIL SCTP ABLE ABLE

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1264页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1265页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1266页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user The parameter modificatio n has no impact on the equipment.

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Erl

-

None

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1267页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

80(ADD CELLINTE RRATHON COV) 80 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) RNC(SET INTERRAT HONCOV)

This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] in [MML]SET INTERRAT HONCOV[/ MML] is set to ON. This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1268页,共3267页

162734118.xls.ms_office1

文档密级:
The settings of CsInfoUpdF lag is valid only when the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the equipment. The settings of CsInfoUpd Tmr is valid only when the value of [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON.The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

-

900

RNC

CsInfoUpd Tmr needs to be set when [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to ON; CsInfoUpd Tmr does not need to be set when [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1269页,共3267页

162734118.xls.ms_office1

文档密级:
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R5 or any later version, CsNriCfgM ode may be set to SUPP_IUF LEX.The parameter modificatio n has no impact on the equipment. When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R6 or any later

None

-

SUPP_NO NE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1270页,共3267页

162734118.xls.ms_office1

文档密级:
The settings of CSNRILeng th is valid only when the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

CSNRILeng th needs to be set when [PARA]CsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to ON; CSNRILeng th does not need to be set when [PARA]CsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

TRUE(SET DSACAUT OALGO) None(ADD RNC CELLDSA CMANUA LPARA)

When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1271页,共3267页

162734118.xls.ms_office1

文档密级:

None

OFF

OFF

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1272页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1273页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1274页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1275页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1276页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

CS_AMRC _SWITCH: OFF, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH:ON, CS_IUUP_ RNC V2_SUPPO RT_SWITC H:OFF, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH:OF F

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

DCH

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1277页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

EDCH_TTI RNC _10ms

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

OFF

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1278页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

bit

BIT4(ADD SCCPCHB ASIC) BIT2(ADD PRACHBA SIC)

BIT4(ADD SCCPCHB ASIC) Physical BIT2(ADD channel PRACHBA SIC)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

per cent

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1279页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Transmissio n resource None group

Not involved

Not involved

Not involved

None

-

ON

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None This classified zone is not bound to other service areas.

Not involved

Not involved

Not involved

None

-

None

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1280页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

D64

RNC

The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]F2 DTvmThd[/ PARA]; [PARA]D2 F2PTvmTh d[/PARA] < [PARA]Be EFach2DTv mThd[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D1000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D5000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1281页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

30

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1282页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

RATE_UP_ AND_DO RNC WN_ON_D CH

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

30

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

100

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1283页,共3267页

162734118.xls.ms_office1

文档密级:

None

16

16

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1284页,共3267页

162734118.xls.ms_office1

文档密级:

None

2

2

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

255

RNC

When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, DefaultCnO p optionally needs to be set.Otherwis e,it does not need.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1285页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

-22

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-13

-13

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1286页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

0

RNC

This paramter must be configured when [PARA]Re HostPolicy[/ PARA] is set to REHOSTD ELAY.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

On E1 working mode, the parameter [PARA]DE LAY[/PAR A] and [PARA]DL YGB[/PAR A] must obey the following rules: [PARA]DE LAY[/PAR 25(AEUa),2 A]*64*30/( IMA group 00(AOUa) 53*8) > [PARA]DL YGB[/PAR A] + 3*2; [PARA]DE LAY[/PAR A]*64*30/( 53*8) + 3*2 + [PARA]DL YGB[/PAR A] < 1024. On T1 working mode, they must obey

N (No impact on the UE in idle mode)

Not involved

Not involved

If the time delay is very large on the line, and the max differ delay is low, Several links can not be activated.

8/7/2013

华为机密,未经许可不得扩散

第1287页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-

7

RNC

This parameter is valid only when the [PARA]Cod eBalancing DrdSwitch[/ PARA] parameter is set to ON through the [MML]SET DRD[/MM L] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1288页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Qrx levminExtS up[/PARA] parameter is set to TRUE but not required when the [PARA]Qrx levminExtS up[/PARA] parameter is set to FALSE. This parameter is valid only when [PARA]Qrx levminExtS up[/PARA] is set to TRUE.

文档密级:

None

-

None

Cell(ADD CELLSELR ESEL) RNC(ADD NRNCCEL L)

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

The [PARA]DE M3UA(AD NO[/PARA D M3DE) ] field in Not RNC(ADD [MML]AD involved M3LKS,AD D D M3RT) M3DE[/M ML]

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

When running this command, ensure that the source IP address and the destination IP address cannot be the local IP address of the configured IP path and the detected peer IP address.

8/7/2013

华为机密,未经许可不得扩散

第1289页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

min

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1290页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

MAY

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

50

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1291页,共3267页

162734118.xls.ms_office1

文档密级:

ms

64(ADD CELLQUA LITYMEA S) 64 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

10

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

D6(SET LDM) RNC D3(SET SATLDM)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D128

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1292页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-(SET FRCCHLT YPEPARA) D8 D8(ADD CELLFRC)

RNC(SET FRCCHLT YPEPARA) Cell(ADD CELLFRC)

If this parameter is set through both the [MML]SET FRCCHLT YPEPARA[ /MML] and [MML]AD D CELLFRC[/ MML] commands, the parameter set through the [MML]AD D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRCCHLT YPEPARA[ /MML] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1293页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D64

RNC

This parameter can be used for selection of the initial rate for BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter is set to on through the [MML]SET CORRMAL GOSWITC H[/MML] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D64

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1294页,共3267页

162734118.xls.ms_office1

文档密级:

ms

64(ADD CELLQUA LITYMEA S) 64 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

64(ADD CELLQUA LITYMEA S) 64 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1295页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1296页,共3267页

162734118.xls.ms_office1
The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA](Se e [MML]AD D CELLLDM [/MML]) >= [PARA]Dl CellTotalTh d[/PARA]; [PARA]Dl CellTotalTh d[/PARA] >= [PARA]Dl

文档密级:

None

90

90

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

SF/2

SF/2

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1297页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

The value of this parameter must satisfy the following relationship: [PARA]DL OVSFSF[/P ARA]>=[P ARA]DLC ODENO[/P ARA]. .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

80

80

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvAMR Thd[/PARA ]; [PARA]Dl ConvAMR Thd[/PARA ]> [PARA]Dl OtherThd[/ PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1298页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvNonA MRThd[/P ARA]; [PARA]Dl ConvNonA MRThd[/P ARA] > [PARA]Dl OtherThd[/ PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

Cell(ADD CELLLDR) None 3 3 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1299页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 3 3 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D64

RNC

When the value of DlMidRate Calc is HAND_AP POINT,the following relationship must be satisfied: [PARA]Dl DcccRateTh d[/PARA] <= [PARA]Dl MidRateTh

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1300页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

D64(ADD CELLDCC C) D64 -(SET DCCC)

This parameter is available if the value of [PARA]BE QosPerform [/PARA] in [MML]SET QOSACT[/ MML] is YES. Cell(ADD To CELLDCC configure C) this RNC(SET parameter, DCCC) you must take into consideratio n the actual fullcoverage rate of a certain cell. Otherwise, the QoS would be affected.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1301页,共3267页

162734118.xls.ms_office1
For the BE users with the same [PARA]Tra fficClass[/P ARA], [PARA]TH PClass[/PA RA] and [PARA]Bea rType[/PAR A] values, make sure: [PARA]Ul GBR[/PAR A] of GOLD users ([PARA]Us erPriority[/P ARA] is set to GOLD) >= [PARA]Ul GBR[/PAR A] of SILVER users ([PARA]Us erPriority[/P ARA] is set to SILVER)

文档密级:

kbit/s

-

D64

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1302页,共3267页

162734118.xls.ms_office1

文档密级:

None

SF32

SF32

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl HoCeCode ResvSf[/PA RA] >= [PARA]DlL drCreditSfR esThd[/PA RA]; [PARA]Dl HoCeCode ResvSf[/PA RA] >= [PARA]Cel lLdrSfResT hd[/PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1303页,共3267页

162734118.xls.ms_office1

文档密级:

None

85

85

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl CellTotalTh d[/PARA] >= [PARA]Dl HOThd[/PA RA] ; [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvAMR Thd[/PARA ]; [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvNonA MRThd[/P ARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1304页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

文档密级:

None

-

10

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit/s

200000

200000

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1305页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

20

20

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1306页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1307页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1308页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None SF8 SF8 NodeB(AD D NODEBLD R)

The value of this parameter must not be larger than [PARA]Dl HoCeCode ResvSf[/PA RA] in [MML]AD D CELLCAC[ /MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1309页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1310页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1311页,共3267页

162734118.xls.ms_office1

文档密级:

None

CodeAdj(A DD CELLLDR) BE traff rate reduction(A DD NODEBLD R)

CodeAdj(A DD CELLLDR) BE traff rate reduction(A DD NODEBLD R)

Cell(ADD CELLLDR) NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1312页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1313页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1314页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1315页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

60

60

Cell

The value of this parameter must satisfy the following relationship: [PARA]DlL drTrigThd[/ PARA] >= [PARA]DlL drRelThd[/P ARA]; [PARA]Dl OlcRelThd[ /PARA] >= [PARA]DlL drRelThd[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1316页,共3267页

162734118.xls.ms_office1

文档密级:

None

inter-freq load handover(A DD CELLLDR) no action(ADD NODEBLD R)

inter-freq load handover(A DD CELLLDR) no action(ADD NODEBLD R)

Cell(ADD CELLLDR) NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1317页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1318页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1319页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1320页,共3267页

162734118.xls.ms_office1

文档密级:

None

BE traff rate reduction(A DD CELLLDR) no action(ADD NODEBLD R)

BE traff rate reduction(A DD CELLLDR) no action(ADD NODEBLD R)

Cell(ADD CELLLDR) NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1321页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

70

70

Cell

The value of this parameter must satisfy the following relationship: [PARA]DlL drTrigThd[/ PARA] >= [PARA]DlL drRelThd[/P ARA]; [PARA]Dl OlcTrigThd [/PARA] > [PARA]DlL drTrigThd[/ PARA]; [PARA]Dl OtherThd[/ PARA](See [MML]AD D CELLCAC[ /MML]) >= [PARA]DlL drTrigThd[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

1000

1000

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D64

D64

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1322页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

D1(ADD CELLQUA LITYMEA S) D1 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

HAND_AP RNC POINT

This parameter is valid when the [PARA]Dl RateUpAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates, or when [PARA]Dl RateDnAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1323页,共3267页

162734118.xls.ms_office1
This parameter is valid when the [PARA]Dl MidRateCal c[/PARA] in [MML]SET DCCC[/M ML] is set to HAND_AP POINT, and the following relationship must be satisfied: [PARA]Dl DcccRateTh d[/PARA] <= [PARA]Dl

文档密级:

kbit/s

-

D128

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1324页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

3000

RNC

The following relationship must be satisfied: [PARA]Ul ModeChang eTimerLen[ /PARA] <= [PARA]Dl ModeChang eTimerLen[ /PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1325页,共3267页

162734118.xls.ms_office1

文档密级:

None

3

3

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1326页,共3267页

162734118.xls.ms_office1

文档密级:

None

3

3

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

D1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1327页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

85

85

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl OlcRelThd[ /PARA]; [PARA]Dl OlcRelThd[ /PARA] >= [PARA]DlL drRelThd[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1328页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1329页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

95

95

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl OlcRelThd[ /PARA]; [PARA]Dl OlcTrigThd [/PARA] > [PARA]DlL drTrigThd[/ PARA]; [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl CellTotalTh d[/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1330页,共3267页

162734118.xls.ms_office1

文档密级:

None

75

75

Cell

The value of this parameter must satisfy the following relationship: [PARA]Dl ConvAMR Thd[/PARA ]> [PARA]Dl OtherThd[/ PARA]; [PARA]Dl ConvNonA MRThd[/P ARA] > [PARA]Dl OtherThd[/ PARA]; [PARA]Dl OtherThd[/ PARA] >= [PARA]DlL drTrigThd[/ PARA](See [MML]AD D CELLLDM [/MML]). The value of this parameter must satisfy the following relationship: [PARA]DL OVSFSF[/P ARA]>=[P ARA]DLC ODENO[/P ARA]. .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1331页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1332页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1333页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

20(ADD CELLQOS HO) 20 -(SET QOSHO)

Cell(ADD CELLQOS HO) RNC(SET QOSHO)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1334页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

Valid when [PARA]VP QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1335页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

3_Rates

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

3_Rates

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1336页,共3267页

162734118.xls.ms_office1

文档密级:

dB

5(ADD CELLQOS HO) 5 -(SET QOSHO)

Cell(ADD CELLQOS HO) RNC(SET QOSHO)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1337页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1338页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1339页,共3267页

162734118.xls.ms_office1

文档密级:

None

D64(ADD CELLCMC F) D64 -(SET CMCF)

Cell(ADD CELLCMC F) None RNC(SET CMCF)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

10

RNC

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to NOPRIORI TY. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1340页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D64

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

50

RNC

The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1341页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

50

RNC

The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1342页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

120

RNC

The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1343页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

120

RNC

The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1344页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

64(ADD CELLQUA LITYMEA S) 64 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1345页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]BT[ /PARA] in [MML]AD D IMAGRP[/ MML] is selected, this parameter is valid. 2.On E1 working mode, the parameter IMA group [PARA]DE LAY[/PAR A] and [PARA]DL YGB[/PAR A] must obey the following rules: [PARA]DE LAY[/PAR A]*64*30/( 53*8) > [PARA]DL YGB[/PAR A] + 3*2;

文档密级:

cell/s

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1346页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

When the value of [PARA]SP DF[/PARA] Y is set to WNF, this parameter is valid.

RNC

After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1347页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]SP DF[/PARA] Y is set to DNF, this parameter is valid. This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE.

RNC

After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

None

None

None

Cell(ADD CELLSETU P) RNC(ADD NRNCCEL L)

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1348页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.

文档密级:

None

None

None

Cell(ADD CELLSETU P) RNC(ADD NRNCCEL L)

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

SINGLE_T RNC PC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1349页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1350页,共3267页

162734118.xls.ms_office1
The [PARA]DP X[/PARA] field in [MML]AD D N7DPC[/M ML] The parameter [PARA]DP X[/PARA] in [MML]AD D N7DPC[/M ML] When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUR, IUCS, or NNI_AAL2 SWITCH, or the value of When the value of [PARA]VC LTYPE[/PA RA] in [MML]AC T VCLCC[/M ML] is set to CC, the activation direction should be

文档密级:

None

-

None

RNC(ADD MTP3RT,A DD NRNC,AD D CNNODE, ADD MTP3LKS, ADD N7DPC) M3UA(AD D M3DE) Adjacent Node(ADD ADJNODE)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

BOTH

BOTH

PVC

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1351页,共3267页

162734118.xls.ms_office1
DRA_AQM _SWITCH: OFF, DRA_BE_E DCH_TTI_ RECFG_S WITCH:ON , DRA_BE_ RATE_DO WN_BF_H O_SWITC H:OFF, DRA_DCC C_SWITCH :ON, RNC DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH:OFF, DRA_HSD PA_STATE _TRANS_S WITCH:OF F, DRA_HSU PA_DCCC_ SWITCH:O N, DRA_HSU PA_STATE

文档密级:

None

-

DRA_BE_ RATE_DO WN_BF_H O_SWITC H,DRA_TH ROU_DCC C_SWITCH ,DRA_BE_ EDCH_TTI _RECFG_S WITCH and DRA_HSU PA_DCCC_ SWITCH are valid when DRA_DCC C_SWITCH is set to ON; For BE service,DR A_HSDPA_ STATE_TR ANS_SWIT CH and DRA_HSU PA_STATE _TRANS_S WITCH are valid when DRA_PS_B

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-18

-18

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1352页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-(SET DRD) 2 2(ADD CELLDRD)

If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1353页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

60

IP:60; ATM:45

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

60

IP:60; ATM:45

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1354页,共3267页

162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.

文档密级:

ms

60

IP:60; ATM:45

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

ms

60

IP:60; ATM:80

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1355页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r

文档密级:

ms

80

80

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1356页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r

文档密级:

ms

80

80

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

8/7/2013

华为机密,未经许可不得扩散

第1357页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

DR_RRC_ DRD_SWI TCH:ON,D R_RAB_SI NG_DRD_ RNC SWITCH:O N,DR_RAB _COMB_D RD_SWITC H:OFF

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1358页,共3267页

162734118.xls.ms_office1

文档密级:

None

6

6

RNC

DRXCycle LenCoef needs to be set only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN or PS_DOMAI N.

N (For the UE in idle mode, Not affecting its involved period of listening to PCHs)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

6

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1359页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

PPP Link(ADD PPPLNK) MLPPP Link(ADD MPLNK)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1360页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

0(PING IP) -(SET PHBMAP,S ET DSCPMAP) 62(ADD SCTPLNK)

Ethernet port(PING 0(PING IP) IP) None(SET RNC(SET PHBMAP,S DSCPMAP) ET None DSCPMAP) SCTP(ADD 62(ADD SCTPLNK) SCTPLNK) Board(SET PHBMAP) Ethernet port

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

None

Not involved

Not involved

Not involved Interrupt the service until the parameter is correctly set.

This parameter cannot be modified. The parameter cannot be modified.

None

-

None

RNC

None

Y

RNC

None

-

None

E1/T1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1361页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

IP Route(ADD IPRT) RNC(ADD FLOW,AD D IPRTBIND)

The destination IP address must not be the broadcast address or the multicast address. The parameter must not be the same as Not any IP involved address that has been configured in the RNC. The parameter must not be the same as the internal/exte rnal IP address of the BAM. Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

IP Route

None

Not involved

Not involved

None

-

None

IP Route

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1362页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

E1/T1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON. This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1363页,共3267页

162734118.xls.ms_office1

文档密级:

frame

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

slot

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1364页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a, the value of [PARA]PT YPE[/PAR A] is set to FE, [PARA]AU TO[/PARA] in [MML]SET ETHPORT[ /MML] is set to DISABLE, the duplex is valid. This paramter is valid only when [PARA]Dy nCellShutD ownSwitch[ /PARA] is set to ON. This paramter is valid only when [PARA]Dy nCellShutD ownSwitch[ /PARA] is set to ON.

文档密级:

None

-

Full

Ethernet port

N (No impact on the UE in idle mode)

Port

This parameter If the mode must be is not consistent consistent, with the will peer interrupt equipment. service until The Full it is mode is consistent. recommend ed.

s

-

20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

180

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1365页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

CONDITIO CONDITIO NALSHUT NALSHUT Cell DOWN DOWN

This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

ms

-

30

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1366页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

4

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

8

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1367页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

2

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1368页,共3267页

162734118.xls.ms_office1
When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.

文档密级:

None

-

None

IP Path

N (No impact on services when the Ping detection succeeds)

Not involved

Not involved

This address must be a peer address in normal status, and the peer equipment can respond to the PING request. The parameter modificatio n has no impact on the equipment.

dB

-

500

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

ms

-

100

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1369页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]SET FRC[/MML ] and [MML]AD D CELLFRC[/ MML] commands, the parameter RNC(SET set through FRC) the Cell(ADD [MML]AD CELLFRC) D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRC[/MML ] command. If this parameter is set through both the

文档密级:

-(SET FRC) ms 30000(ADD CELLFRC) 30000

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

3000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

dB

-

5000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1370页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]SET FRC[/MML ] and [MML]AD D CELLFRC[/ MML] commands, the parameter RNC(SET set through FRC) the Cell(ADD [MML]AD CELLFRC) D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRC[/MML ] command. If this parameter is set through both the

文档密级:

dB

-(SET FRC) 41 41(ADD CELLFRC)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1371页,共3267页

162734118.xls.ms_office1

文档密级:
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWE EK" type. In this case, you must set the Interrupt benchmark the service day to (n until the 6) or earlier, parameter is where n correctly represents set. the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in

None

-

None

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEE K, the end date should be set.

RNC

bit

336

336

RAB

This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D1 to D12.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1372页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D10 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to D11 or D12.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1373页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D2 to D12.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1374页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D3 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D4 to D12.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1375页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D5 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D6 to D12.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1376页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D7 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D8 to D12.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1377页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D9 to D12. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D1

D1

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1378页,共3267页

162734118.xls.ms_office1

文档密级:

None

16

16

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1379页,共3267页

162734118.xls.ms_office1

文档密级:

None

16

16

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1380页,共3267页

162734118.xls.ms_office1
RATE_8KB PS: not selected RATE_16K BPS: not selected RATE_32K BPS: not selected RATE_64K BPS: not selected RATE_128 KBPS: selected RATE_144 RNC KBPS: not selected RATE_256 KBPS: selected RATE_384 KBPS: not selected RATE_608 KBPS: selected RATE_144 0KBPS: not selected RATE_204 8KBPS: not

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

None

RAB

This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1381页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS. This parameter is must larger than [PARA]Edc hTargetLittl eRetransNu m[/PARA]. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS. This parameter is must less than [PARA]Edc hTargetLarg eRetransNu m[/PARA].

文档密级:

None

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1382页,共3267页

162734118.xls.ms_office1

文档密级:

None

2

2

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1383页,共3267页

162734118.xls.ms_office1

文档密级:

None

2

2

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1384页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

per cent

20

20

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

10

10

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1385页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1386页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the end type should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1387页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q704.

None

-

OFF

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1388页,共3267页

162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM Y [/PARA] in [MML]SET TZ[/MML] is set to DATE, WEEK, or DATEWEE K, the end month should be set. N (No impact on None the UE in idle mode) N (No impact on the UE in idle mode)

文档密级:

None

-

OCT

RNC

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

None

-

None

RNC

Not involved

Not involved

None

-

UEA0-1; UEA1-1

RNC

None

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

min

-

None

Cell

min

-

None

Cell

This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_2 or ON_3.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1389页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_3.

文档密级:

min

-

None

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

Negotiation with the peer Not network involved element is required.

Not involved

Not involved

This parameter cannot be modified.

None

1

1

Ethernet port

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

s

1

1

Ethernet port

None

Not involved

Not involved

Not involved

None

1

1

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

204800

204800

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

s

1

1

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1390页,共3267页

162734118.xls.ms_office1

文档密级:

s

60

60

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.

8/7/2013

华为机密,未经许可不得扩散

第1391页,共3267页

162734118.xls.ms_office1

文档密级:
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.

ms

-

7000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

03&00&00 RNC

When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the end time should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

byte

D1024

D1024

RAB

The value of this parameter must be larger than the value of the [PARA]Eve nt4bThd[/P ARA] parameter.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1392页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

None

RAB

The value of this parameter must be smaller than the value of the [PARA]Eve nt4aThd[/P ARA] parameter.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

50

50

RAB

per cent

160

160

RAB

This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1393页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

文档密级:

per cent

80

80

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

SUN

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEE K, the end week should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1394页,共3267页

162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to WEEK, the end week sequence should be set.

文档密级:

None

-

LAST

RNC

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

None

0.02

0.02

SRB

None

Not involved

Not involved

Not involved

None

None

0.004

0.004

SRB

None

Not involved

Not involved

Not involved

None

None

Current

Current

SRB

None

Not involved

Not involved

Not involved

None

None

100

100

SRB

None

Not involved

Not involved

Not involved

None

None

0

0

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1395页,共3267页

162734118.xls.ms_office1

文档密级:

None

0.02

0.02

SRB

None

Not involved

Not involved

Not involved

None

None

0.004

0.004

SRB

None

Not involved

Not involved

Not involved

None

None

Current

Current

SRB

None

Not involved

Not involved

Not involved

None

None

100

100

SRB

None

Not involved

Not involved

Not involved

None

None

0

0

SRB

None

Not involved

Not involved

Not involved

None

None

0.02

0.02

SRB

None

Not involved

Not involved

Not involved

None

None

0.004

0.004

SRB

None

Not involved

Not involved

Not involved

None

None

Current

Current

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1396页,共3267页

162734118.xls.ms_office1

文档密级:

None

100

100

SRB

None

Not involved

Not involved

Not involved

None

None

0

0

SRB

None

Not involved

Not involved

Not involved

None

None

0.02

0.02

SRB

None

Not involved

Not involved

Not involved

None

None

0.004

0.004

SRB

None

Not involved

Not involved

Not involved

None

None

Current

Current

SRB

None

Not involved

Not involved

Not involved

None

None

100

100

SRB

None

Not involved

Not involved

Not involved

None

None

0

0

SRB

None

Not involved

Not involved

Not involved

None

ms

-

D16000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1397页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D5000

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Transport channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

This parameter is consistent with [PARA]Trc hId[/PARA] in [MML]AD D FACH[/M Not involved ML], [MML]AD D FACHDYN TFS[/MML ], and [MML]AD D FACHLOC H[/MML].

Not involved

Not involved

This parameter cannot be modified.

dB

10(ADD CELLMBM SFACH) -(SET MSCHFAC H,SET MBMSFAC H)

10(ADD CELLMBM SFACH) None(SET MBMSFAC H) -30(SET MSCHFAC H)

Cell(ADD CELLMBM SFACH) RNC(SET None MSCHFAC H,SET MBMSFAC H)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1398页,共3267页

162734118.xls.ms_office1

文档密级:

None

REQUIRE

REQUIRE

Cell

This parameter is required when the [PARA]Inte rFreqInterR atMeasInd[/ PARA] parameter is set to INTER_FR EQ, INTER_RA T or INTER_FR EQ_AND_I NTER_RA T but not required when the [PARA]Inte rFreqInterR atMeasInd[/ PARA] parameter is set to NOT_REQ UIRE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

per cent

-

None

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1399页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

4

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1400页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a, the value of [PARA]PT YPE[/PAR A] is set to FE, [PARA]AU TO[/PARA] in [MML]SET ETHPORT[ /MML] is set to DISABLE, the Flow Control is valid. When the value of [PARA]FL OWCTRLS WITCH[/P ARA] in [MML]SET OPT[/MML ] is set to ON, the flow control parameter index should be set. When the value of [PARA]FL OWCTRLS WITCH[/P ARA] is set to ON in [MML]SET ETHPORT[ /MML], the FCINDEX should be set. 1.When the value of [PARA]FL OWCTRLS

文档密级:

None

-

It must be consistent Ethernet with the port peer device

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

1(ADD ATMLOGI CPORT,AD D UNILNK,A DD IMAGRP,A DD FRALNK) -(ADD PORTFLO WCTRLPA RA,SET ETHPORT, SET OPT) 0(ADD IPLOGICP ORT,ADD PPPLNK,A DD MPGRP)

1(ADD ATMLOGI CPORT,AD D UNILNK,S ET OPT,ADD IMAGRP,A DD FRALNK) None(ADD PORTFLO WCTRLPA RA,SET ETHPORT) 0(ADD IPLOGICP ORT,ADD PPPLNK,A DD MPGRP)

Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) Correspondi ng optical port(SET OPT) Ethernet port(SET ETHPORT) MLPPP Group, PPP Link(ADD PPPLNK,A DD MPGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT,ADD ATMLOGI CPORT) RNC(ADD PORTFLO

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1401页,共3267页

162734118.xls.ms_office1
PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)

文档密级:

None

16bit

16bit

None

Y

PPP link

Interrupt the service until negotiate successfully again.

Modify this parameter will cause failure in negotiation.

dB

-

STEPSIZE_ RNC 1DB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

None

None

Cell(ADD CELLSETU P) RNC(ADD NRNCCEL L)

None

None

None

Cell(ADD CELLSETU P) RNC(ADD NRNCCEL L)

This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE. This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE.

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

dB

-

-30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1402页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

-200

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

12

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address.

8/7/2013

华为机密,未经许可不得扩散

第1403页,共3267页

162734118.xls.ms_office1
CFGMMLRNCXYYYYMM DDHHMM RNC SS.txt(EXP CFGMML) None(BKP DB)

文档密级:

None

-

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

D3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1404页,共3267页

162734118.xls.ms_office1

文档密级:

None

D3(ADD CELLINTE RRATHOC OV) D3 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D32

D32

NodeB

This parameter is required when the [PARA]IsFi xedMachs WinSize[/P ARA] parameter is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1405页,共3267页

162734118.xls.ms_office1

文档密级:

None

ON

ON

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

Fractional link(ADD FRALNK) Correspondi ng optical port(SET OPT) PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) LGC port(ADD ATMLOGI CPORT,AD D IPLOGICP ORT) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(A DD UNILNK) Ethernet port(SET ETHPORT) None None RNC

None

ON(ADD ATMLOGI CPORT,AD D UNILNK,A DD MPGRP,A DD IPLOGICP ON ORT,ADD IMAGRP,A DD PPPLNK,A DD FRALNK) -(SET ETHPORT, SET OPT)

When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to ON, this parameter is valid and the flow control parameter index can be set. When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to UOIa and the value of [PARA]LG CAPPTYP E[/PARA] is set to ATM, the flow control none

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1406页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

This parameter cannot be modified.

None

Not involved

This parameter cannot be modified.

This parameter cannot be modified.

In [MML]EXP ELABEL[/ MML], the [PARA]FN[ /PARA] parameter cannot be a space or any of the following characters: '@', '#', '!', '%', '^', '&', '*', '[', ']', '\'', '\\'.

None

-

OFF

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1407页,共3267页

162734118.xls.ms_office1

文档密级:

None

NO

NO

IP Path

ms

2

2

IP Path

[PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] can be set YES only when the adjnode type is IUB. When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES, this parameter is valid.

N (No impact on the UE in connected mode and the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in connected mode and the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

256

256

MLPPP Group

None

N (No impact on the UE in idle mode)

Not involved

Not involved

When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/I P_HC, you can enable the RTP/UDP/I P/PPP header compress function. This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1408页,共3267页

162734118.xls.ms_office1
1. When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to FRAATM, the flow control switch and the flow control parameter index are required. 2. When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to FRAIMA, the IMA group

文档密级:

None

-

None

Fractional link

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D128

D128

IMA group

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Adjacent Node

The factor table index is configured by setting the value of [PARA]FTI [/PARA] in [MML]AD D FACTORT ABLE[/MM L].

N (No impact on the UE in idle mode)

Not involved

Not involved

This FACTORT ABLE must be already configured.

8/7/2013

华为机密,未经许可不得扩散

第1409页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1410页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1411页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1412页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1413页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey Not the involved following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT)

Not involved

Not involved

The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1414页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1415页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1416页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1417页,共3267页

162734118.xls.ms_office1

文档密级:
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

kbit/s

0

0

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD None FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK)

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1418页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1419页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1420页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1421页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1422页,共3267页

162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey Not the involved following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI

文档密级:

kbit/s

0

0

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT)

Not involved

Not involved

The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0

kbit/s

0

0

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1423页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1424页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

IP Path

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <

N (No impact on the UE in connected mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1425页,共3267页

162734118.xls.ms_office1

文档密级:
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type

kbit/s

0

0

[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Physical channel

None

15

15

Physical channel

Either [PARA]Gai nFactorBeta C[/PARA] or [PARA]Gai nFactorBeta D[/PARA] should be set to 15. Either [PARA]Gai nFactorBeta C[/PARA] or [PARA]Gai nFactorBeta D[/PARA] should be set to 15.

Not involved

Not involved

Not involved

This parameter cannot be modified.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1426页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Ethernet port

[MMLWhe n the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Not IPCHK[/M involved ML] is set to SBFD or ARP, the gateway IP address should be set. N (no impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

DEG

DEG

RNC

When the value of [PARA]GC DF[/PARA] in [MML]AD D GPS[/MML ] is selected as DEG, LATITUDE and LONGTIT UDE should be set; Not When the involved value of [PARA]GC DF[/PARA] in [MML]AD D GPS[/MML ] is selected as SEC, LATITUDE SEC and LONGITU DESEC should be set.

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1427页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1428页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].

文档密级:

kbit/s

WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1429页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].

文档密级:

kbit/s

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1430页,共3267页

162734118.xls.ms_office1

文档密级:

None

OFF

OFF

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

10

10

Cell

None

N (No impact on the UE in idle mode) Not involved

Not involved

Not involved

The parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Transmissio n resource None group

Not involved

Not involved

None

-

None

Transmissio n resource None group

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1431页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to GSMCELL.

文档密级:

None

-

None

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

512

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1432页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

0

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

Mode0

Mode0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1433页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH.

文档密级:

ms

D50

D50

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

5000

5000

SCTP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

s

5

5

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1434页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This paramter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to TRUE.

文档密级:

None

0

0

Cell(ADD GSMCELL, ADD CELLHCS) RNC(ADD NRNCCEL L)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1435页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF13; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1436页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1437页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1438页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1439页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1440页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1441页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1442页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1443页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1444页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1445页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1446页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1447页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1448页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1449页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1450页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

50

50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1451页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1452页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1453页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1454页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1455页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1456页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1457页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1458页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

-

None

RNC

When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to FRAATM, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1459页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to IMA, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1460页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

2

2

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1461页,共3267页

162734118.xls.ms_office1

文档密级:

None

SingleHost SingleHost NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1462页,共3267页

162734118.xls.ms_office1
HO_ALGO _HCS_SPE ED_EST_S WITCH:OF F, HO_ALGO _LDR_ALL OW_SHO_ SWITCH:O N, HO_ALGO _MBMS_F LC_SWITC H:OFF, HO_ALGO _OVERLA RNC Y_SWITC H:OFF, HO_INTER _FREQ_HA RD_HO_S WITCH:OF F, HO_INTER _FREQ_RP RT_2D2F_ SWITCH:O N, HO_INTER _RAT_CS_ OUT_SWIT CH:ON,

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1463页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-16

-16

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-92

-92

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1464页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to NCOPT, this parameter should be set. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

Not involved

Not involved

This parameter cannot be modified.

None

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1465页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

30

30

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1466页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

TRUE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

50

RNC

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1467页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1468页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

文档密级:

None

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

70

70

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1469页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D1 to D8.

文档密级:

None

0

0

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

336

336

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1470页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D2 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D3 to D8.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1471页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D4 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D5 to D8.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1472页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D6 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to D7 or D8.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1473页,共3267页

162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to D8. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.

文档密级:

bit

-

None

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D1

D1

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1474页,共3267页

162734118.xls.ms_office1

文档密级:

None

E_F_DPCH E_F_DPCH Cell _OFF _OFF

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

MIMO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1475页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1476页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1477页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D1, D2, D3, or D4.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1478页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D2, D3, or D4.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

1.This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D3 or D4.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

1.This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D4.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1479页,共3267页

162734118.xls.ms_office1

文档密级:

None

5

5

Cell

This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Manual.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1480页,共3267页

162734118.xls.ms_office1

文档密级:

None

5

5

Cell

This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]Hs PdschMaxC odeNum[/P ARA] >= [PARA]Hs PdschMinC odeNum[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1481页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]Hs PdschMaxC odeNum[/P ARA] >= [PARA]Hs PdschMinC odeNum[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1482页,共3267页

162734118.xls.ms_office1

文档密级:

dB

2.5dB

2.5dB

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

None

None

Cell(ADD CELLSETU P) RNC(ADD NRNCCEL L)

This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1483页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

4

4

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1484页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD,SIL VER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1485页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D5760

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

MBR

MBR

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1486页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

BasedOnUE RNC Cap

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

50

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1487页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

RATE_UP_ AND_DO RNC WN_ON_E DCH

This parameter is available if DRA_DCC C_SWITCH and DRA_HSU PA_DCCC_ SWITCH are set to ON in [MML]SET CORRMAL GOSWITC H[/MML] is YES.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

100

100

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1488页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

100

100

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1489页,共3267页

162734118.xls.ms_office1
This parameter can be used for selection of the initial rate for HSUPA BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter and the HSUPA_D CCC_SWIT CH under the [PARA]Hsp aSwitch[/P ARA] parameter are set to on through the [MML]SET CORRMAL GOSWITC H[/MML] This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

文档密级:

kbit/s

-

D256

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1490页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

100

100

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1491页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

RNC

None

Not involved

Not involved

Not involved

per cent

50

50

Cell

The value of this parameter must satisfy the following relationship: [PARA]Hsu pAuRetrnsL dTrigThd[/P ARA] >= [PARA]Hsu pAuRetrnsL dRelThd[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1492页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

70

70

Cell

The value of this parameter must satisfy the following relationship: [PARA]Hsu pAuRetrnsL dTrigThd[/P ARA] >= [PARA]Hsu pAuRetrnsL dRelThd[/P ARA]. This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

0

0

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1493页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF13; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1494页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1495页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1496页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1497页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1498页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1499页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1500页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1501页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1502页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1503页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1504页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1505页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1506页,共3267页

162734118.xls.ms_office1

文档密级:

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

per cent

80

80

SRB

None

Not involved

Not involved

Not involved

None

per cent

10

10

SRB

None

Not involved

Not involved

Not involved

None

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1507页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to UNI, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1508页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1509页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1510页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1511页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1512页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

50

50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1513页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1514页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1515页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1516页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1517页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1518页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]CX T[/PARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to VCLCX, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1519页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0(ADD CELLINTR AFREQHO ) 0 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1520页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0(ADD CELLINTR AFREQHO ) 0 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1521页,共3267页

162734118.xls.ms_office1

文档密级:

dB

8(ADD CELLINTR AFREQHO ) 8 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1522页,共3267页

162734118.xls.ms_office1

文档密级:

dB

8(ADD CELLINTR AFREQHO ) 8 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1523页,共3267页

162734118.xls.ms_office1

文档密级:

dB

8(ADD CELLINTR AFREQHO ) 8 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1524页,共3267页

162734118.xls.ms_office1

文档密级:

dB

8(ADD CELLINTR AFREQHO ) 8 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1525页,共3267页

162734118.xls.ms_office1

文档密级:

dB/ dBm

4(ADD CELLINTE RFREQHO COV) 4 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

6(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO 6 NCOV) -(SET INTERFRE QHONCOV )

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO None NCOV) RNC(SET INTERFRE QHONCOV )

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1526页,共3267页

162734118.xls.ms_office1

文档密级:

dB/ dBm

4(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 4 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1527页,共3267页

162734118.xls.ms_office1

文档密级:

dB/ dBm

4(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 4 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1528页,共3267页

162734118.xls.ms_office1

文档密级:

dB

4(ADD CELLINTE RRATHOC OV) 4 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1529页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHON COV) -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) RNC(ADD None CELLMBD RINTERRA T,SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1530页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0(ADD CELLINTE RRATHOC OV) 0 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1531页,共3267页

162734118.xls.ms_office1

文档密级:

dB/ dBm

0(ADD CELLMBD RINTERFR EQ,ADD CELLINTE 0 RFREQHO COV) -(SET INTERFRE QHOCOV)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

720

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

For details of the timer, refer to ITUT Q.714. The modificatio n is not recommend ed.

s

-

90

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

For details of the timer, refer to ITUT Q.714. The modificatio n is not recommend ed.

8/7/2013

华为机密,未经许可不得扩散

第1532页,共3267页

162734118.xls.ms_office1
When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.

文档密级:
When the network is in poor running status, the packet size cannot be set to a large value. If the value is too large, the path status may be affected. The parameter modificatio n has no impact on the equipment.

byte

64

64

IP Path

N (No impact on services when the Ping detection succeeds)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1533页,共3267页

162734118.xls.ms_office1

文档密级:

None

ALLOWED ALLOWED Cell

This parameter is valid only when [PARA]Idle CellBarred[/ PARA] is set to BARRED.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1534页,共3267页

162734118.xls.ms_office1

文档密级:

dB

2

2

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1535页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

2

Cell

This parameter is valid only when [PARA]Qu alMeas[/PA RA] is set to CPICH_EC NO.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1536页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

This parameter is valid when [PARA]SIB 11Ind[/PAR A] is set to TRUE.

N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1537页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

This parameter is valid when [PARA]SIB 11Ind[/PAR A] is set to TRUE.

N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1538页,共3267页

162734118.xls.ms_office1

文档密级:

dB

127

127

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1539页,共3267页

162734118.xls.ms_office1

文档密级:

dB

127

127

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1540页,共3267页

162734118.xls.ms_office1

文档密级:

s

D320

D320

Cell

This parameter is valid only when [PARA]Idle CellBarred[/ PARA] is set to BARRED.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

UNI: 15000 SAAL NNI: 500

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link.

8/7/2013

华为机密,未经许可不得扩散

第1541页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

20000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter value of IgorTmr must be less than the value of [PARA]Intr Tmr[/PARA ] set in [MML]SET IUTIMERA NDNUM[/ MML].The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1542页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

IMA group(ADD IMALNK,A DD None IMAGRP) Fractional link(ADD FRALNK)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

IMA group

None

N (No impact on the UE in idle mode)

Not involved

Not involved

[IMA ID] is used to identify the IMA group. Normally, in one interface board, the sending IMA ID can not be the same. In order to avoid duplicate IMA ID between RNC and NodeB, it is suggested that the IMA ID in RNC is set different from that in NodeB.

8/7/2013

华为机密,未经许可不得扩散

第1543页,共3267页

162734118.xls.ms_office1
For AEUa, the sum of UNI/IMA/F RA can not exceed 32,for AOUa, the sum of UNI/IMA/F RA on an optical port IMA can not group(ADD exceed IMALNK) 63(E1)/84(T Not IMA 1) involved link(STR When the IMATST) value of [PARA]PF MT[/PARA ] in [MML]RST PFMM[/M ML] is set to IMALNK, the value of IMALNKN can be set.

文档密级:

None

-

None

Not involved

Not involved

This parameter cannot be modified.

None

V1.1

IMA protocol IMA group Version 1.1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The protocol version of IMA group in RNC must be the same with that in the peer device.

8/7/2013

华为机密,未经许可不得扩散

第1544页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

DCH

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1545页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]IM SMBR[/PA RA] >= [PARA]IM SGBR[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

-

None

RNC

The parameter must be greater than or equal to [PARA]Ims iMin[/PAR A] in [MML]AD D IMSISNAM AP[/MML]. The parameter must be less than or equal to [PARA]Ims iMax[/PAR A] in [MML]AD D IMSISNAM AP[/MML].

Not involved

Not involved

Not involved

This parameter cannot be modified.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1546页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D32

RNC

This parameter is required when the [PARA]Ims BearEnhanc edSwitch[/P ARA] parameter is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

-

None

RNC

This parameter must be less than or equal to [PARA]Ims iRtMax[/PA RA] in [MML]AD D IMSIIDNN SCNIDMA P[/MML]. This parameter must be greater than or equal to [PARA]Ims iRtMin[/PA RA] in [MML]AD D IMSIIDNN SCNIDMA P[/MML].

Not involved

Not involved

Not involved

This parameter cannot be modified.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1547页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]IM SMBR[/PA RA] >= [PARA]IM SGBR[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1548页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1549页,共3267页

162734118.xls.ms_office1

文档密级:
Only the OM channel can be kept between the logically inhibited board and the other boards, whereas the service channel between them will be inhibited. The operator can run some OM commands on this inhibited board. The physically inhibited board becomes unavailable, and the board status and the equipment For parameter modificatio n, refer to ITU-T Q.2110. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to LOGIC,the value range of [PARA]SN[ /PARA] is 0, 2, 4, 8 to Y 27. When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to PHYSICAL ,the value range of [PARA]SN[ /PARA] is 0 to 5, 8 to 27.

RNC

Inhibition period of the board

ms

1500

1500

SAAL

When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

UIA1-1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1550页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]IN TERACTM BR[/PARA] >= [PARA]IN TERACTG BR[/PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]IN TERACTM BR[/PARA] >= [PARA]IN TERACTG BR[/PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1551页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

CSAMR_I NTERFRE Q:OFF, CSNONAM R_INTERF REQ:OFF, Cell PSR99_INT ERFREQ:O FF, PSHSPA_I NTERFRE Q:OFF

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-16

-16

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1552页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-14(ADD CELLINTE RFREQHO COV) -14 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be smaller than [PARA]Inte rFreqCsThd 2FEcN0[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1553页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-95(ADD CELLINTE RFREQHO COV) -95 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be smaller than [PARA]Inte rFreqCsThd 2FRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1554页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be larger than [PARA]Inte rFreqCsThd 2DEcN0[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1555页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be larger than [PARA]Inte rFreqCsThd 2DRscp[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1556页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1557页,共3267页

162734118.xls.ms_office1
For low speed(5km/ h):Range is D4~D6, the recommend ed value is D5; for middle speed(50km /h):Range is D3~D4, the recommend ed value is D4; for high speed(120k m/h):Range is D2~D4, the recommend ed value is D2; universal value:Range is D3~D6, the recommend ed value is D3.(SET INTERFRE QHOCOV, ADD

文档密级:

None

D3(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE RFREQHO COV) -(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE None RFREQHO COV) RNC(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1558页,共3267页

162734118.xls.ms_office1

文档密级:

None

INTER_FR INTER_FR Cell EQ_COV EQ_COV

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1559页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-14(ADD CELLINTE RFREQHO COV) -14 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rFreqHThd2 FEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1560页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-95(ADD CELLINTE RFREQHO COV) -95 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rFreqHThd2 FRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1561页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rFreqHThd2 DEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1562页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rFreqHThd2 DRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1563页,共3267页

162734118.xls.ms_office1

文档密级:

None

INTER_FR EQ_AND_I NTER_RA T

INTER_FR EQ_AND_I Cell NTER_RA T

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1564页,共3267页

162734118.xls.ms_office1

文档密级:

None

CPICH_EC/ CPICH_EC/ Cell NO NO

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1565页,共3267页

162734118.xls.ms_office1

文档密级:

s

60(ADD CELLINTE RFREQHO NCOV,AD D CELLINTE RFREQHO COV) -(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV) 3(ADD CELLMBD RINTERFR EQ)

60(SET INTERFRE QHONCOV ,ADD CELLINTE RFREQHO NCOV,SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) 3(ADD CELLMBD RINTERFR EQ)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE None RFREQHO COV) RNC(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

Sub System None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1566页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

-16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-14(ADD CELLINTE RFREQHO COV) -14 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be smaller than [PARA]Inte rFreqR99Ps Thd2FEcN0 [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1567页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-95(ADD CELLINTE RFREQHO COV) -95 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be smaller than [PARA]Inte rFreqR99Ps Thd2FRscp[ /PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1568页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be larger than [PARA]Inte rFreqR99Ps Thd2DEcN 0[/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1569页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

The value of this parameter must be larger than [PARA]Inte rFreqR99Ps Thd2DRscp [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1570页,共3267页

162734118.xls.ms_office1

文档密级:

None

SIMINTER SIMINTER Cell FREQRAT FREQRAT

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1571页,共3267页

162734118.xls.ms_office1

文档密级:

None

PERIODIC AL_REPO RTING(AD D CELLINTE RFREQHO COV) -(SET INTERFRE QHOCOV)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE None RFREQHO COV) RNC(SET EVENT_T EVENT_T INTERFRE RIGGER(A RIGGER(A QHOCOV) DD DD CELLMBD CELLMBD RINTERFR RINTERFR EQ) EQ)

PERIODIC AL_REPO RTING(SE T INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1572页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

If the Inter RAT Inter Plmn Ho Allowed is switched off,Neighbo r cells belonging to different PLMNs in the inter RAT should be removed.

8/7/2013

华为机密,未经许可不得扩散

第1573页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

If the Intra RAT Inter Plmn Ho Allowed is switched off,Neighbo r cells belonging to different PLMNs in the intra RAT should be removed. The parameter modificatio n has no impact on the equipment.

None

-

CSAMR_I NTERRAT: RNC OFF

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

-14(ADD CELLINTE RRATHOC OV) -14 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be smaller than [PARA]Inte rRatCsThd2 FEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1574页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-100(ADD CELLINTE RRATHOC OV) -100 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be smaller than [PARA]Inte rRatCsThd2 FRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1575页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RRATHOC OV) -12 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be larger than [PARA]Inte rRatCsThd2 DEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1576页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-97(ADD CELLINTE RRATHOC OV) -97 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be larger than [PARA]Inte rRatCsThd2 DRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1577页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

RNC

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1578页,共3267页

162734118.xls.ms_office1

文档密级:

None

D3(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE D3 RRATHOC OV) -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE None RRATHOC OV) RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1579页,共3267页

162734118.xls.ms_office1

文档密级:

None

16(ADD CELLINTE RRATHON COV) 16 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) None RNC(SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

YES

RNC

This parameter is Valid when [PARA]Em ergLCSSwit ch[/PARA] is set to ON.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1580页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

21

21

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

DRD

RNC

This parameter is Valid when [PARA]Em ergLCSSwit ch[/PARA] is set to ON and [PARA]Inte rRatHOPer mit[/PARA] is set to YES.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1581页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-15(ADD CELLINTE RRATHOC OV) -15 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rRatHThd2 FEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1582页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-110(ADD CELLINTE RRATHOC OV) -110 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rRatHThd2 FRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1583页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-13(ADD CELLINTE RRATHOC OV) -13 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rRatHThd2 DEcN0[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1584页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-107(ADD CELLINTE RRATHOC OV) -107 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rRatHThd2 DRscp[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1585页,共3267页

162734118.xls.ms_office1

文档密级:

s

60(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) -(SET INTERRAT HONCOV, SET INTERRAT HOCOV) 3(ADD CELLMBD RINTERRA T)

60(SET INTERRAT HONCOV, ADD CELLINTE RRATHON COV,SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV) 3(ADD CELLMBD RINTERRA T)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE None RRATHOC OV) RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

Sub System None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1586页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

21(ADD CELLINTE RRATHON COV) 21 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) None RNC(SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1587页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

21(ADD CELLINTE RRATHON COV) 21 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) None RNC(SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1588页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D1000(AD D CELLMBD RINTERRA T,ADD D1000 CELLINTE RRATHOC OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

3(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) 3 -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1589页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

0(ADD CELLINTE RRATHOC OV) 0 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1590页,共3267页

162734118.xls.ms_office1

文档密级:

s

0(ADD CELLINTE RRATHOC OV) 0 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1591页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-15(ADD CELLINTE RRATHOC OV) -15 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be smaller than [PARA]Inte rRatR99PsT hd2FEcN0[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1592页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-110(ADD CELLINTE RRATHOC OV) -110 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be smaller than [PARA]Inte rRatR99PsT hd2FRscp[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1593页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-13(ADD CELLINTE RRATHOC OV) -13 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be larger than [PARA]Inte rRatR99PsT hd2DEcN0[ /PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1594页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-107(ADD CELLINTE RRATHOC OV) -107 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

The value of this parameter must be larger than [PARA]Inte rRatR99PsT hd2DRscp[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1595页,共3267页

162734118.xls.ms_office1

文档密级:

None

PERIODIC AL_REPO RTING(AD D CELLINTE RRATHOC OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE None RRATHOC OV) RNC(SET EVENT_T EVENT_T INTERRAT RIGGER(A RIGGER(A HOCOV) DD DD CELLMBD CELLMBD RINTERRA RINTERRA T) T)

PERIODIC AL_REPO RTING(SE T INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1596页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

RNC

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

1

1

RNC

None

Y

Port

The time between deactivate and activate the port.

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1597页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-24(ADD CELLINTR AFREQHO ) -24 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

This parameter is valid when [PARA]Intr aFreqMeas Quantity[/P ARA] is set to CPICH_EC/ NO.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1598页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-115(ADD CELLINTR AFREQHO ) -115 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

This parameter is valid when [PARA]Intr aFreqMeas Quantity[/P ARA] is set to CPICH_RS CP.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1599页,共3267页

162734118.xls.ms_office1

文档密级:

None

D3

D3

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1600页,共3267页

162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Intr aFreqLdbPe riodTimerL en[/PARA] > 2 x 60 x [PARA]Mi nForDlBasi cMeas[/PA RA]; When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,the value of this parameter

文档密级:

s

-

1800

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1601页,共3267页

162734118.xls.ms_office1

文档密级:

None

REQUIRE

REQUIRE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1602页,共3267页

162734118.xls.ms_office1

文档密级:

None

CPICH_EC/ Cell(ADD NO(ADD CELLINTR CELLINTR AFREQHO CPICH_EC/ AFREQHO ) None NO ) RNC(SET -(SET INTRAFRE INTRAFRE QHO) QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

Sub System None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1603页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

12

RNC

This parameter is Valid when [PARA]For cedSHOSwi tch[/PARA] is set to ON.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

6(ADD CELLINTR AFREQHO ) 6 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSNVP [/PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSNVP [/PARA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1604页,共3267页

162734118.xls.ms_office1

文档密级:

dB

6(ADD CELLINTR AFREQHO ) 6 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSVP[/ PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSVP[/ PARA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1605页,共3267页

162734118.xls.ms_office1

文档密级:

dB

6(ADD CELLINTR AFREQHO ) 6 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1APS[/PA RA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BPS[/PA RA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

18

RNC

This parameter is Valid when [PARA]For cedSHOSwi tch[/PARA] is set to ON.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1606页,共3267页

162734118.xls.ms_office1

文档密级:

dB

12(ADD CELLINTR AFREQHO ) 12 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSNVP [/PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSNVP [/PARA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1607页,共3267页

162734118.xls.ms_office1

文档密级:

dB

12(ADD CELLINTR AFREQHO ) 12 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSVP[/ PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSVP[/ PARA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1608页,共3267页

162734118.xls.ms_office1

文档密级:

dB

12(ADD CELLINTR AFREQHO ) 12 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) RNC(SET INTRAFRE QHO)

The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1APS[/PA RA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BPS[/PA RA] + [PARA]Hys tfor1B[/PA RA] / 2).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

60000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter value of IntrTmr must be greater than the value of [PARA]Igor Tmr[/PARA ] set in [MML]SET IUTIMERA NDNUM[/ MML].The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1609页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to IPOAPVC,t he value of [PARA]IPA DDR[/PAR A] should be set. In [MML]AD D IPOAPVC[/ MML] The local [IP address] and the [Peer IP address] must be in the same network segment. When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to IPOAPVC, the IP address should be None

文档密级:

None

-

None

IPOA

N (No impact on the UE in idle mode)

Services carried on PVC

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port(ADD ETHTRKIP ,ADD ETHIP) RNC(ADD IPOAPVC, ADD DEVIP) Global(AC T VCLCC)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1610页,共3267页

162734118.xls.ms_office1
The [PARA]IPA DDR[/PAR A] in [MML]AD D IPPATH[/ MML] can not be at one network segment with the peer IP address of SCTPLNK or IPPATH Not whose local involved IP address is device IP address of FG2a/GOU a in this subrack;[PA RA]IPADD R[/PARA] and [PARA]PE ERIPADDR [/PARA] in [MML]AD D IPPATH[/

文档密级:

None

-

None

IP Path

Not involved

Not involved

This parameter cannot be modified.

None

UDP/IP_H UDP/IP_H PPP Link C C

None

Not involved

Not involved

Not involved

This parameter must be the same with the local and peer device.

8/7/2013

华为机密,未经许可不得扩散

第1611页,共3267页

162734118.xls.ms_office1

文档密级:
When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/I P_HC, you can enable the RTP/UDP/I P/PPP header compress function. This parameter cannot be modified.

None

MLPPP UDP/IP_H UDP/IP_H Group, PPP None C C Link

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1612页,共3267页

162734118.xls.ms_office1

文档密级:
If the transport type of the NodeB is IUB-ATM, the next hop IP address must be the peer IP address of the configured IPoA PVC. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP

None

-

None

RNC

When the value of [PARA]IPL OGPORTF LAG[/PAR A] in [MML]AD D NODEBIP[/ MML] is set to YES, the IPLPN should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1613页,共3267页

162734118.xls.ms_office1

文档密级:
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.

None

-

None

RNC

When the value of [PARA]IPL OGPORTF LAG[/PAR A] in [MML]AD D NODEBIP[/ MML] is set to YES, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1614页,共3267页

162734118.xls.ms_office1

文档密级:
The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

NodeB

The parameter should be configured when [PARA]Tnl BearerType [/PARA] is modified from ATM to IP or dual stack ATM/IP.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1615页,共3267页

162734118.xls.ms_office1
When the value of [PARA]IPT YPE[/PAR A] in [MML]AD D ETHIP[/M ML] is set to SECOND, the IP address index should be set. Not When the involved value of [PARA]IPT YPE[/PAR A] in [MML]AD D ETHTRKIP [/MML] is set to SECOND, the IP address index should be set.

文档密级:

None

-

None

Ethernet port

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1616页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1617页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1618页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1619页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1620页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NOT_BAR NOT_BAR Cell RED RED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1621页,共3267页

162734118.xls.ms_office1

文档密级:

None

NO

NO

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Transmissio n resource None group

Not involved

Not involved

Not involved

None

FALSE

FALSE

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

YES

YES

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

IP path

When the value of [PARA]ISQ OSPATH[/ PARA] in [MML]AC Not involved T IPPM[/MM L] is selected as YES, the PHB should

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1622页,共3267页

162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, IUR, or IUCS, and Not the value of involved [PARA]TR ANST[/PA RA] in [MML]AD D ADJNODE[ /MML] is set to ATM or ATM_IP, this parameter is valid.

文档密级:

None

-

None

Adjacent Node

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC(ADD ADJMAP,A DD TRMMAP) None IP Path(ADD IPPATH)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1623页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

1

1

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

-

300

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

-

300

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1624页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

OFF

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

TRUE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

OFF

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

OFF

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RAB

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1625页,共3267页

162734118.xls.ms_office1

文档密级:

None

IUCS_IUPS IUCS_IUPS RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

16 byte

Correspondi ng optical None port

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

8/7/2013

华为机密,未经许可不得扩散

第1626页,共3267页

162734118.xls.ms_office1
When the value of [PARA]J0R XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J0 hope incept value should be set.

文档密级:

None

-

SBS 155

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

None

-

16 byte

Correspondi ng optical None port

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

None

-

SBS 155

When the value of [PARA]J0T XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J0 transmit value should be set.

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

None

-

16 byte

Correspondi ng optical None port

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

8/7/2013

华为机密,未经许可不得扩散

第1627页,共3267页

162734118.xls.ms_office1
When the value of [PARA]J1R XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J1 hope incept value should be set.

文档密级:

None

-

SBS 155

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

None

-

16 byte

Correspondi ng optical None port

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

None

-

SBS 155

When the value of [PARA]J1T XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J1 transmit value should be set.

Port

If the mode is not consistent, will interrupt service until it is consistent.

The settings of the local end and the peer end should be consistent.

8/7/2013

华为机密,未经许可不得扩散

第1628页,共3267页

162734118.xls.ms_office1

文档密级:
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.

None

-

None

Optical Port None

Not involved

Not involved

Not involved

None

-

None

Optical Port None

Not involved

Not involved

Not involved

None

-

None

Optical Port None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1629页,共3267页

162734118.xls.ms_office1

文档密级:
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. The value of this parameter should be consistent with the peer one. Modifying this parameter may affect the sensitivity of SAAL link detection. In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. The parameter modificatio n has no impact on the equipment.

None

-

None

Optical Port None

Not involved

Not involved

Not involved

None

-

None

Port

None

Not involved

Not involved

Not involved

ms

-

UNI: 2000 NNI: 100

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Ethernet port

When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to PRIMARY, the KEYCHK should be set. N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

D6

RNC

None

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1630页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC(ADD LASNAMA P,ADD CZ,ADD NRNCCEL L,ADD SAC,ADD QUICKCE LLSETUP, ADD CELLSETU P,ADD RAC,ADD LAC) Cell(ADD GSMCELL)

The value of this parameter is dependent on the value of Not [PARA]LA involved C[/PARA] in [MML]AD D SAC[/MML ].

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1631页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

ms

2

2

LGC port

None

4

4

LGC port

ms

25

25

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1632页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

文档密级:

None

3

3

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

8

8

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

None

-

32

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1633页,共3267页

162734118.xls.ms_office1

文档密级:

None

None. If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] -(SET commands, DRD) RNC(SET the UserNumbe DRD) parameter UserNumbe r Cell(ADD set through r(ADD CELLDRD) the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1634页,共3267页

162734118.xls.ms_office1
This parameter is valid only when the [PARA]Ldb DRDSwitch DCH[/PAR A] parameter is set to ON. If this parameter is set through both the RNC(SET [MML]AD DRD) D Cell(ADD CELLDRD[ CELLDRD) /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes

文档密级:

per cent

-(SET DRD) 35 35(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1635页,共3267页

162734118.xls.ms_office1
This parameter is valid only when the [PARA]Ldb DRDSwitch HSDPA[/P ARA] parameter is set to ON. If this parameter is set through both the RNC(SET [MML]AD DRD) D Cell(ADD CELLDRD[ CELLDRD) /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes

文档密级:

per cent

-(SET DRD) 100 100(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1636页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

10

RNC

This parameter is valid only when the [PARA]Ldb DRDLoadR emainThdD CH[/PARA ] parameter is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1637页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

10

RNC

This parameter is valid only when the [PARA]Ldb DRDSwitch HSDPA[/P ARA] parameter is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1638页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

文档密级:

None

-(SET DRD) OFF OFF(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1639页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

文档密级:

None

-(SET DRD) OFF OFF(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-

30

RNC

This parameter is valid only when the [PARA]Ldb DRDchoice [/PARA] parameter is set to POWER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1640页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NODEB_C REDIT_LD R_SWITCH :disabled. LCG_CRE DIT_LDR_ RNC SWITCH:di sabled. LC_CREDI T_LDR_S WITCH:dis abled.

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1641页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

13

13

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1642页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

IUBLDR

RNC

[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1643页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

UULDR

RNC

[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1644页,共3267页

162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] and [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Ldr PeriodTime rLen[/PAR A] > 2 x 60 x [PARA]Mi nForUlBasi cMeas[/PA RA]; [PARA]Ldr PeriodTime rLen[/PAR A] > 2 x 60 x

文档密级:

s

-

10

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1645页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

CREDITLD RNC R

[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1646页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

CODELDR RNC

[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

1.The parameter is used in command [MML]AD D ADJMAP [/MML] as loadeq table index for gold,silver,a Not nd bronze involved users. 2.When TRANST of ADJNODE is dual stack or hybird IP,loadeq can be added.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1647页,共3267页

162734118.xls.ms_office1
The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. This is a parameter in [MML]AD D OPC[/MML RNC(ADD ]. M3LE) The [PARA]LE M3UA(AD NO[/PARA D M3DE) ] field in [MML]AD D M3LE[/MM L]

文档密级:

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This load EQ table must be already configured.

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This load EQ table must be already configured.

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This load EQ table must be already configured.

None

-

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1648页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

-

ON

RNC

None

Not involved

Not involved

Not involved

None

0

0

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to FRAATM, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1649页,共3267页

162734118.xls.ms_office1
When the value of [PARA]OT [/PARA] in [MML]AC T PACH[/M ML] is set to Step_by_Ste p and the value of [PARA]BT[ /PARA] is set to SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, the Logic function type is

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

None

-

None

Board

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Board

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1650页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to IMA, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

None

-

D8

RNC

This paramter is valid only when [PARA]DlS FLimitCMI nd[/PARA] is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1651页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D64

RNC

The low activity rate adjustment function is invalid when [PARA]Litt leRateThd[/ PARA]>=[ PARA]UlD cccRateThd [/PARA] and [PARA]Litt leRateThd[/ PARA]>=[ PARA]DlD cccRateThd [/PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SRB

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1652页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME, the value range of Not [PARA]LN involved KCODE[/P ARA] is HDB3 or AMI. When the value of [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to T1_SUPER _FRAME or T1_EXTEN DED_SUPE

文档密级:

None

-

None

E1T1 link

Not involved

Not involved

The line code should be consistent with the interconnect ed one.HDB3( HDB3 coding) and AMI(AMI coding)is used in E1 link. B8ZS(B8ZS coding) and AMI_ZCS( AMI coding)is used in T1 link.

8/7/2013

华为机密,未经许可不得扩散

第1653页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1LOP[/ MML] is set to AEUa or PEUa, the E1/T1 link number link(SET should be E1T1LOP) set and the Cell(LOP value range E1T1) is from 0 to E1T1 31. Link(STR When the E1T1TST) value of E1T1 [PARA]BT[ link(SET /PARA] in E1T1) [MML]SET Optical E1T1LOP[/ Port(SET MML] is set COPTLNK) to AOUa or POUa, the link number should be set and the value range is from 0 to 167. When the value of

文档密级:

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

M3UA_MA M3UA_MA STER_MO STER_MO RNC D D

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1654页,共3267页

162734118.xls.ms_office1

文档密级:

None

B1111

B1111

RNC

None

Not involved

Not involved

Not involved

The link selection mask should be properly set according to MTP3 load sharing. If it is not properly set, the MTP3 links cannot share load with each other.

8/7/2013

华为机密,未经许可不得扩散

第1655页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to SINGLE,the value range of [PARA]LN KT[/PARA] is E1_DOUB LE_FRAM E,E1_CRC4 Not _MULTI_F involved RAME,T1_ SUPER_FR AME,T1_E XTENDED _SUPER_F RAME. When the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to ALL,the value range

文档密级:

None

-

E1_CRC4_ MULTI_FR E1T1 link AME

Not involved

Not involved

The frame structure should be consistent with the interconnect ed one.

None

-

None

Communica tion Link(ACT None VCLCC) VCL(LOP VCL)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

The parameter must not be the same as Not any IP involved address that has been configured in the RNC.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1656页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

MLPPP Group, MLPPP Link

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

NodeB

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

None

SCTP

None

Y

Services that the SCTP link bears

The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.

8/7/2013

华为机密,未经许可不得扩散

第1657页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

SCTP

None

Y

Services that the SCTP link bears

The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n. The SCTP port number is the The parameter services are that should interrupted be until the negotiated SCTP link with the is working peer end normally. before modificatio n. The parameter modificatio n has no impact on the equipment.

None

-

None

SCTP

When the value of [PARA]MO DE[/PARA] in [MML]AD D Y SCTPLNK[ /MML] is set to Client, this parameter can be modified.

Services that the SCTP link bears

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

SCTP

This parameter determines whether [PARA]LO GPORTSN[ /PARA] and [PARA]LO Y GPORTNO [/PARA] in [MML]AD D SCTPLNK[ /MML] are valid.

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

This parameter is based on actual networking.

8/7/2013

华为机密,未经许可不得扩散

第1658页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LO GPORTFL AG[/PARA ] in [MML]AD Y D SCTPLNK[ /MML] is set to ON, this parameter is valid. When the value of [PARA]LO GPORTFL AG[/PARA ] in [MML]AD Y D SCTPLNK[ /MML] is set to ON, this parameter is valid.

文档密级:

None

-

None

SCTP

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

This parameter is based on actual networking.

None

-

None

SCTP

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

This parameter is based on actual networking.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1659页,共3267页

162734118.xls.ms_office1

文档密级:
If the parameter is set to REMOTE_ LOOP or LOCAL_L OOP, the services on this link may be interrupted until the link The loopback is loopback cancelled. keeps If the uplink interrupting is beared by the services IMAGRP, until it is the cancelled. IMAGRP must be reset after the loopmode is cancelled. Otherwise, the IMAGRP will be destroied, and cannot bear new

None

-

None

E1/T1 link(SET E1T1LOP) Loopback optical port(SET OPTLOP)

None

Y

Services carried on the E1/T1 link

None

1

1

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1660页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to NCOPT, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

When the value of [PARA]CA RRYFLAG[ LGC /PARA] in port(ADD [MML]AD IPLOGICP Not D ORT) IPPATH[/ involved IP MML] is set Path(ADD to IP IPPATH) LGCPORT, this parameter is valid.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1661页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYFLAG[ /PARA] in [MML]AD D Y IPPATH[/ MML] is set to IP LGCPORT, this parameter is valid.

文档密级:

None

-

None

IP Path

IP Path

The logic Less than 5 port must minutes exist.

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

None

-

ALL

E1T1 link

None

Not involved

Not involved

Not involved

None

-

ALL

Optical Port None

Not involved

Not involved

Not involved

If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.

8/7/2013

华为机密,未经许可不得扩散

第1662页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to UNI, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]CX T[/PARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to VCLCX, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1663页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

2905

The SCTP links of all the subracks, which work None as the server and whose upper layer is M3UA

Y

The SCTP link works as the server and the upper-layer application is M3UA signaling service.

The parameter modificatio n should be negotiated with the peer end, The and after services are modificatio interrupted n, the RNC until the should be SCTP link reset. It is is working recommend normally. ed that this parameter should not be modified when the system is running.

None

-

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1664页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port(PING MAC,ACT ETHCC,AD D None ETHMEP,A DD ETHMA) RNC(TRC MAC)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1665页,共3267页

162734118.xls.ms_office1
When [PARA]CA RRYLNKT [/PARA] is Not involved SAALSCTP, this parameter is valid. None Not involved

文档密级:

None

SAAL

SAAL

NodeB

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

Not involved

Not involved

This parameter cannot be modified.

None

-

MAP_HSU PA_TTI_2 MS_SWIT CH:OFF, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH:O FF, MAP_PS_B E_ON_E_F ACH_SWI TCH:OFF, MAP_PS_S TREAM_O RNC N_E_FACH _SWITCH: OFF, MAP_PS_S TREAM_O N_HSDPA_ SWITCH:O FF, MAP_PS_S TREAM_O N_HSUPA_ SWITCH:O FF, MAP_SRB _6800_WH EN_RAB_

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1666页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

UE

MASK needs to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context_Gr oup; MASK Not does not involved need to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context or All_Context s. Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

None

-

None

PPP Link

None

Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.

None

-

None

MLPPP Group, MLPPP Link Ethernet port

None

Not involved

Not involved

None

-

None

None

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1667页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

24(ADD CELLSELR ESEL) -(ADD NRNCCEL L)

24(ADD CELLSELR ESEL) None(ADD NRNCCEL L)

Cell(ADD CELLSELR ESEL) RNC(ADD NRNCCEL L)

This parameter is valid only when [PARA]Ma xAllowedUl TxPowerInd [/PARA] is set to TRUE.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1668页,共3267页

162734118.xls.ms_office1

文档密级:

None

10

When the application type is NBAP, the recommend ed value is 10; when SCTP the application type is M3UA, the recommend ed value is 4.

The value to be set should be larger than the value of [PARA]MA XPATHRE TR[/PARA] in [MML]AD D SCTPLNK[ /MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1669页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit/s

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

LGC port

1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]M INBW[/PA RA] must be less than [PARA]MA XBW[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1670页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

150

RNC

The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

4

4

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

8/7/2013

华为机密,未经许可不得扩散

第1671页,共3267页

162734118.xls.ms_office1

文档密级:

None

3(ADD CELLINTR AFREQHO ) 3 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D15

D15

Transport channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

dB

-

49

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1672页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

3

RNC

The value of this parameter must not larger than [PARA]Ma xCellInActi veSet[/PAR A] of [MML]SET INTRAFRE QHO[/MM L] or [MML]AD D CELLINTR AFREQHO [/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

48

48

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1673页,共3267页

162734118.xls.ms_office1

文档密级:

dB

10

10

Transport channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

1031

1031

IP Path

When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES,this parameter is valid.

N (No impact on the UE in connected mode and the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

16

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1674页,共3267页

162734118.xls.ms_office1

文档密级:

None

64

64

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

20

20

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1675页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

256(ADD PPPLNK) -(ADD MPGRP)

[PARA]MA XMFLEN[/ PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8. PPP When the Link(ADD 256(ADD value of PPPLNK) PPPLNK) [PARA]PP MLPPP Y None(ADD PMUX[/PA Group, PPP MPGRP) RA] in Link(ADD [MML]AD MPGRP) D MPGRP[/M ML] is set to ENABLE, this parameter should be set.

PPP link

Interrupt the service until negotiate successfully again.

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1676页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

0

0

SAAL

When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

None

5

When the application type is NBAP, the recommend ed value is 5; when the SCTP application type is M3UA, the recommend ed value is 2.

The value to be set should be smaller than the value of [PARA]MA XASSOCR ETR[/PAR A] in [MML]AD D SCTPLNK[ /MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1677页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

346

346

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

UNI: 25 NNI: 500

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

s

-

5

RNC

The value of this parameter must be set to meet the following conditions: 100 x [PARA]Ma xQueueTim eLen[/PAR A] > [PARA]Poll TimerLen[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1678页,共3267页

162734118.xls.ms_office1

文档密级:

byte

64(ADD PPPLNK) -(ADD MPGRP)

[PARA]MA XMFLEN[/ PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8. 1.When the value of [PARA]PP PMUX[/PA PPP RA] in Link(ADD 64(ADD [MML]AD PPPLNK) PPPLNK) D MPGRP, Y None(ADD MPGRP[/M PPPLNK(A MPGRP) ML] is set DD to MPGRP) ENABLE, this parameter should be set. 2.[PARA]M AXMFLEN [/PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8.

PPP link

Interrupt the service until negotiate successfully again.

This parameter cannot be modified.

per cent

75

75

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1679页,共3267页

162734118.xls.ms_office1

文档密级:
GPS record should be deleted before using this command.

h

12

12

RNC

None

Not involved

Not involved

Not involved

dBm

430

430

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dBm

24

24

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1680页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

24

24

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1681页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

24

24

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1682页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

24

24

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1683页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1684页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to MBFD, the multi hop BFD detect local IP should be set. Only valid to the slot of Not FG2a and involved GOUa.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1685页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user This parameter cannot be modified.

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

COMMON COMMON Cell

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1686页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1687页,共3267页

162734118.xls.ms_office1
This parameter is used with the [MML]AD D MBMSAL ARMSERV ICE[/MML] command to enable the no MBMS data check. If the [MML]AD D MBMSAL ARMSERV ICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.Th e parameter This parameter is valid olny when [PARA]Mb msSwitch[/ PARA] is ON.

文档密级:
This parameter is used with the [MML]AD D MBMSAL ARMSERV ICE[/MML] command to enable the no MBMS data check. If the [MML]AD D MBMSAL ARMSERV ICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.Th e parameter

min

-

2

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

OFF

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1688页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

TRUE

TRUE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1689页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell(ADD CELLMBM SSA) RNC(ADD None SAMBMSP ARA,ADD MBMSSA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

kbit/s

-

None

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1690页,共3267页

162734118.xls.ms_office1

文档密级:

None

PTM(ADD SAMBMSP ARA,ADD CELLMBM PTM SPARA) -(SET RNCMBM SPARA)

Cell(ADD CELLMBM SPARA) RNC(SET RNCMBM None SPARA,AD D SAMBMSP ARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

byte

-

1000

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index

When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ Not MML] is set involved to RTVBR or NRTVBR, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1691页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC(SET MBMSPER F,ADD IMSISNAM AP,ADD LASNAMA None P,ADD CNOPERA TOR) Cell(ADD GSMCELL)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

7

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The value of this parameter must fulfill the following condition: [PARA]Mc chAccessPe riodCoef[/P ARA] > [PARA]Mc chRepPerio dCoef[/PAR A]. The value of this parameter must fulfill the following condition: [PARA]Mc chModPerio dCoef[/PAR A] > [PARA]DR XCycleLen Coef[/PAR A] in [MML]AD D CNDOMAI N[/MML].

8/7/2013

华为机密,未经许可不得扩散

第1692页,共3267页

162734118.xls.ms_office1

文档密级:
The value of this parameter must fulfill the following condition: [PARA]Mc chAccessPe riodCoef[/P ARA] > [PARA]Mc chRepPerio dCoef[/PAR A].

None

-

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

MLPPP Group

None

-

None

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index

When the value of [PARA]MP TYPE[/PA RA] in [MML]AD D MPGRP[/M ML] is set to MCPPP, this parameter should be set. When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to UBR_PLUS , the Minimum cell rate should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1693页,共3267页

162734118.xls.ms_office1

文档密级:

None

AUTO(AD D CELLINTE RRATHOC AUTO OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1694页,共3267页

162734118.xls.ms_office1
When the value of [PARA]ME PTYPE[/PA RA] in [MML]AD D ETHMEP[/ Not MML] is set involved to LocalMep, the PortNo and PortType should be set.

文档密级:

None

-

None

Ethernet port

Not involved

Not involved

This parameter cannot be modified.

None

LONG

LONG

MLPPP Group, MLPPP Link

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

dB

-7

-7

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1695页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]ST TDSupInd[/ PARA] of [MML]AD D CELLSETU P[/MML] is set to STTD_Sup ported. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

文档密级:

None

FALSE

FALSE

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D14

D14

Transport channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

SF8

SF8

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1696页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

21

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orAmrE[/P ARA] is set to MIN

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orBeE[/PA RA] is set to MIN

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1697页,共3267页

162734118.xls.ms_office1

文档密级:

min

-

None

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orBeF[/PA RA] is set to MIN

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

This parameter is valid only when [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,and it must satisfy the following relationship: [PARA]Mi nForDlBasi cMeas[/PA RA] x 60 < [PARA]Intr aFreqLdbPe riodTimerL en[/PARA]/ 2; [PARA]Mi nForDlBasi cMeas[/PA RA] x 60 < [PARA]Puc PeriodTime rLen[/PAR A]/2; [PARA]Mi

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1698页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForDlOlcM eas[/PARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaR ateMeas[/P ARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaP wrMeas[/P ARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsupaR ateMeas[/P ARA] is set to MIN.

文档密级:

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1699页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] is set to MIN,and it must satisfy the following relationship: [PARA]Mi nForUlBasi cMeas[/PA RA] x 60 < [PARA]Ldr PeriodTime rLen[/PAR A]/2; [PARA]Mi nForUlBasi cMeas[/PA RA] x 60000 < [PARA]Olc PeriodTime rLen[/PAR A]/2 . This This parameter is valid only when [PARA]Cho iceRprtUnit ForUlOlcM eas[/PARA] is set to MIN.

文档密级:

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1700页,共3267页

162734118.xls.ms_office1

文档密级:

min

-

None

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orVpE[/PA RA] is set to MIN

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

IMA group

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dBm

313

313

Cell

The value of this parameter must satisfy the following relationship: [PARA]Mi nPCPICHP ower[/PAR A] <= [PARA]Ma xPCPICHP ower[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1701页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M ML] is set to SBFD or MBFD, the min interval of BFD packet receive should be set. When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M ML] is set to SBFD or MBFD, the min interval of BFD packet send should be set.

文档密级:

ms

100

100

Ethernet port

Not involved

Not involved

Not involved

This parameter cannot be modified.

ms

100

100

Ethernet port

Not involved

Not involved

Not involved

In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.

None

SF4

SF4

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1702页,共3267页

162734118.xls.ms_office1

文档密级:

None

8

8

Transport channel

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

None

RNC(SET MBMSPER F,ADD IMSISNAM AP,ADD LASNAMA None P,ADD CNOPERA TOR) Cell(ADD GSMCELL)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1703页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH:ON, RNC COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H:ON

When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, MocnContr olSwitch needs to be set.Otherwis e,it does not need.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

If the RAN Sharing Support and MOCN Support are both switched off,Redunda nt operators should be removed by [MML]RM V CNOPERA TOR[/MML ] and only one operator can exist. The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1704页,共3267页

162734118.xls.ms_office1
If the mode is not consistent, will interrupt service until it is consistent.

文档密级:

None

-

None

Port

None

Y

Port

The value of this parameter should be consistent with the peer one.

None

-

AUTO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

None

-

None

Ethernet port

When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to SBFD or ARP, the port work mode should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1705页,共3267页

162734118.xls.ms_office1

文档密级:
If the SCTP link is set to SERVER and the application type is NBAP, the working mode The cannot be services are changed to interrupted CLIENT. until the For the SCTP link SCTP link is working whose normally. application type is M3UA, the working mode can be modified only when the upperlayer application The modificatio n of the timer involves the Not peer end. involved For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The modificatio n of the timer involves the Not peer end. involved For details, refer to ITUT Q2630.1/IT U-T Q2630.2.

None

-

None

SCTP

None

Y

Services carried on the SCTP link

ms

-

10000

RNC

None

N (No impact on the UE in idle mode)

Not involved

ms

-

10000

RNC

None

N (No impact on the UE in idle mode)

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1706页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

文档密级:

ms

1000

1000

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

60

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1707页,共3267页

162734118.xls.ms_office1

文档密级:
The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]US EMP[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

MLPPP Group, MLPPP Link(ADD None MPGRP) RNC(ADD MPLNK)

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1708页,共3267页

162734118.xls.ms_office1

文档密级:

None

MPS_NEU MPS_NEU SAAL TRAL TRAL

When the value of [PARA]SA ALLNKT[/ Not PARA] is involved set to NNI, this parameter is valid.

Not involved

Not involved

Modifying this parameter does not affect the existing SAAL link but may affect the SAAL link setup mode.

None

MCPPP

MCPPP

MLPPP Group, MLPPP Link

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Board

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1709页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1710页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

When the value of [PARA]Ms gInd[/PAR A] is set to ON, this parameter is valid. When [PARA]CB Switch[/PA RA] is set to ON in [MML]SET RNCCBPA RA[/MML] and the CBS license is valid, the cell broadcast can be performed in a specified cell. This parameter specifies the content of broadcast messages.

N (The UE in idle mode may receive Not the RNC involved built-in cell broadcast messages.)

Not involved

This parameter supports only ASCII code character set.The parameter modificatio n has no impact on the equipment.

None

OFF

OFF

Cell

None

N (The UE in idle mode may receive Not the RNC involved built-in cell broadcast messages.)

Not involved

1. Set this parameter to ON if you want to use the RNC built-in cell broadcast function. 2. Do not set this parameter to ON when the RNC is connected to the CBS server. 3. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1711页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

MSP protect None group

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1712页,共3267页

162734118.xls.ms_office1

文档密级:

None

60

60

Cell

The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxPwr[/ PARA] > [PARA]Mtc hRsvPwr[/P ARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1713页,共3267页

162734118.xls.ms_office1

文档密级:

None

40

40

Cell

The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxSf[/P ARA] > [PARA]Mtc hRsvSf[/PA RA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1714页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

80(ADD CELLMBM SFACH) 80 -(SET MBMSFAC H)

Cell(ADD CELLMBM SFACH) RNC(SET MBMSFAC H)

The value of this parameter must fulfill the following Not condition: involved [PARA]Mtc hMinPerc0[ /PARA] >= [PARA]Mtc hMinPerc15 [/PARA].

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1715页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

50(ADD CELLMBM SFACH) 50 -(SET MBMSFAC H)

Cell(ADD CELLMBM SFACH) RNC(SET MBMSFAC H)

The value of this parameter must fulfill the following Not condition: involved [PARA]Mtc hMinPerc0[ /PARA] >= [PARA]Mtc hMinPerc15 [/PARA].

Not involved

Not involved

This parameter cannot be modified.

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1716页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

20

20

Cell

The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxPwr[/ PARA] > [PARA]Mtc hRsvPwr[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1717页,共3267页

162734118.xls.ms_office1

文档密级:

None

16

16

Cell

The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxSf[/P ARA] > [PARA]Mtc hRsvSf[/PA RA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1718页,共3267页

162734118.xls.ms_office1
When the value of [PARA]MT RLGY[/PA RA] in [MML]AD D GPS[/MML ] is selected as MET, the ALTITUDE should be Not set; involved When the value of [PARA]MT RLGY[/PA RA] in [MML]AD D GPS[/MML ] is selected as IMP, the ALTITUDE IMP should be set.

文档密级:

None

MET

MET

RNC

Not involved

Not involved

The parameter cannot be modified.

byte

-(SET ETHPORT) 1500 1500(ADD SCTPLNK)

Ethernet port(SET ETHPORT) SCTP(ADD SCTPLNK)

None

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

The modificatio n may affect the interconnect ion.

ls

When the value of [PARA]PP PMUX[/PA PPP RA] in Link(ADD 1000(ADD 1000(ADD [MML]AD PPPLNK) PPPLNK) PPPLNK) D MLPPP Y -(ADD None(ADD MPGRP[/M Group, PPP MPGRP) MPGRP) ML] is set Link(ADD to MPGRP) ENABLE, this parameter should be

PPP link

The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device.

8/7/2013

华为机密,未经许可不得扩散

第1719页,共3267页

162734118.xls.ms_office1
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M ML] is set to REDPORT, the backup port mask should be set. When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is

文档密级:

None

-

None

Ethernet port

Not involved

Not involved

Not involved

In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. For parameter modificatio n, refer to ITU-T Q.2110. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

100

100

SAAL

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1720页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

D1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

D50

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

D1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

D1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1721页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC(ADD OPC,ADD N7DPC,AD D M3RT,AD D M3LNK,A DD M3LKS,AD D M3LE,ADD MTP3LKS, None ADD MTP3RT) Adjacent Node(ADD ADJNODE) MTP3(AD D MTP3LNK) M3UA(AD D M3DE)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

frame

0

0

Transport channel

The value of this parameter must be set to meet the following conditions: Y [PARA]NB 01max[/PA RA] >= [PARA]NB 01min[/PA RA].

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第1722页,共3267页

162734118.xls.ms_office1
The value of this parameter must be set to meet the following conditions: Y [PARA]NB 01max[/PA RA] >= [PARA]NB 01min[/PA RA]. N (No impact on the UE in idle mode)

文档密级:

frame

0

0

Transport channel

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

20

RNC

None

Not involved

None

-

58080

The SCTP links of all the subracks, which work None as the server and whose upper layer is NBAP

Y

The SCTP link works as the server and the upper-layer application is NBAP.

The parameter modificatio Not n has no involved impact on the equipment. The parameter modificatio n should be negotiated with the peer end, The and after services are modificatio interrupted n, the RNC until the should be SCTP link reset. It is is working recommend normally. ed that this parameter should not be modified when the system is running.

8/7/2013

华为机密,未经许可不得扩散

第1723页,共3267页

162734118.xls.ms_office1

文档密级:
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1724页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

20

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1725页,共3267页

162734118.xls.ms_office1

文档密级:
The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.

None

-

None

RNC

When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

When the value of [PARA]US ENBLB2[/P ARA] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1726页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1727页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

If the Downlink CAC algorithm switch select the equivalent user number algorithm,th en Intra Frequency LDB Algorithm must be closed.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1728页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

PUC should not be adopted if cell's interfrequency measureme nt control information is configured not required, N (No the latter is impact on set the UE in by[MML]A idle mode) DD CELLMEA S[/MML]or [MML]MO D UCELLME AS[/MML], is configured as not required.

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1729页,共3267页

162734118.xls.ms_office1

文档密级:

None

NBM_LDC NBM_LDC _MATCH_ _MATCH_ Cell UE_ONLY UE_ONLY

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

ALGORIT HM_DEPE ND_ON_L CG

ALGORIT HM_DEPE Cell ND_ON_L CG

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1730页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1731页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

PRIORITY 2&PRIORI TY3&PRIO RITY4&PR RNC IORITY5& PRIORITY 6

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

ALGORIT RNC HM_OFF

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1732页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

20

20

Cell

This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1733页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

NC0

NC0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

4(ADD SAMBMSP ARA,ADD CELLMBM 4 SPARA) -(SET RNCMBM SPARA)

Cell(ADD CELLMBM SPARA) RNC(SET RNCMBM None SPARA,AD D SAMBMSP ARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1734页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

8

8

Cell

This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

DIRECT_C DIRECT_C RNC ONNECT ONNECT

None

Y

RNC

After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

8/7/2013

华为机密,未经许可不得扩散

第1735页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

For AEUa/AOU a/UOIa_AT M, next hop must be IPOA PVC peer address, for PEUa/POU a, next hop must be IP PPP link Route(ADD peer ip or Not IPRT) MLPPP involved RNC(ADD peer ip, for IPRTBIND) FG2a/GOU a, next hop must be in the same subnet with the port ip on the board, for UOIa_IP, next hop must be PPP peer ip.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1736页,共3267页

162734118.xls.ms_office1

文档密级:

None

15(ADD CELLHCS HO) 15 -(SET HCSHO)

The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter Not depends on involved network planning.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1737页,共3267页

162734118.xls.ms_office1

文档密级:

None

5

5

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1738页,共3267页

162734118.xls.ms_office1
NMO needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N; NMO does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.

文档密级:

None

MODE2

MODE2

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The modificatio n of NMO is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1739页,共3267页

162734118.xls.ms_office1

文档密级:
When the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON, or the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N, the settings of NNSfTmr is valid.The The parameter modificatio n has no impact on the equipment.

s

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

NodeB

None

Not involved

Not involved

Not involved

None

3840

3840

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1740页,共3267页

162734118.xls.ms_office1

文档密级:

None

3840

3840

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

NodeB(AD D NODEB) Adjacent Node(ADD ADJNODE) RNC(STR NODEBDE TECT,ADD NODEBES N,ADD NODEBIP)

When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, this parameter is Not valid. When the involved value of [PARA]Sel ectType[/P ARA] in [MML]STR NODEBDE TECT[/MM L] is set to SINGLE, this parameter is valid.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

NodeB

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1741页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1742页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

NodeB(STR NODEBB WRPT,AD D NODEBOL C,ADD IPDL,ADD NODEBAL GOPARA, ADD NODEBLD R,ADD NODEB) (ADD CCP,ADD NCP,ADD LOCELL,A DD NBNODES YNCMONP ARA) Cell(ADD QUICKCE LLSETUP, ADD CELLSETU P)

The value of this parameter is dependent on the value of Not [PARA]No involved deBName[/ PARA] in [MML]AD D NODEB[/M ML].

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1743页,共3267页

162734118.xls.ms_office1

文档密级:
Before modifying the NodeB to a version of R4 or earlier, deactivate the HSUPA and HSDPA functions of this NodeB. Before modifying the NodeB to a version of R5 or earlier, deactivate the MBMS function of the NodeB.Befo re modifying the NodeB to a version of R6 or earlier, deactivate the EFACH function of the NodeB. This parameter cannot be modified.

None

R7

R7

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

min

30

30

NodeB

None

Not involved

Not involved

Not involved

None

PERIOD

PERIOD

NodeB

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1744页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

NodeB

None

Not involved

Not involved

Not involved

None

-

None

NodeB

None

Not involved

Not involved

Not involved

None

-

None

NodeB

None

Not involved

Not involved

Not involved

None

NORMAL

NORMAL

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

min

-

None

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

-

None

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1745页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Adjacent Node

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

PICO_TYP NodeB E1

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

NOT_CON NOT_CON Cell FIGURED FIGURED

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1746页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1747页,共3267页

162734118.xls.ms_office1

文档密级:

None

50

50

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1748页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE. This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE; Also the value of this parameter must be different to the others.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1749页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1750页,共3267页

162734118.xls.ms_office1

文档密级:

None

3(ADD SAMBMSP ARA,ADD CELLMBM 3 SPARA) -(SET RNCMBM SPARA)

Cell(ADD CELLMBM SPARA) RNC(SET RNCMBM None SPARA,AD D SAMBMSP ARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1751页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Y

RNC

The services are interrupted until the signaling point is available.

After modificatio n, the RNC should be reset.

8/7/2013

华为机密,未经许可不得扩散

第1752页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

1. If the original ATM address of the NodeB is configured with the route Services through carried on [MML]AD the network D element AAL2RT[/ with the MML], the specific parameter Not ATM cannot be involved address.(A modified. DD 2. If the AAL2RT) original ATM NodeB(AD address of D NODEB) the NodeB is configured with the route in the AAL2RT table, the parameter cannot be modified.

Not involved

Not involved

This parameter cannot be modified.

None

3(ADD CELLHCS HO) 3 -(SET HCSHO)

The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1753页,共3267页

162734118.xls.ms_office1

文档密级:
When the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N, or the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N, NullNRI must be

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1754页,共3267页

162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M

文档密级:

None

-

2(SET DSACAUT OALGO) None(ADD RNC CELLDSA CMANUA LPARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

0(ADD IPLOGICP ORT,ADD MPGRP,A DD PPPLNK) -(SET ETHPORT)

0(ADD IPLOGICP ORT,ADD MPGRP,A DD PPPLNK) None(SET ETHPORT)

OMCH(AD D PPPLNK) Ethernet port(SET ETHPORT) None MLPPP Group, PPP Link(ADD MPGRP) LGC port(ADD IPLOGICP

Not involved

Not involved

Not involved

The negotiation will be successful only when the parameter is set the same with the local and peer device.

8/7/2013

华为机密,未经许可不得扩散

第1755页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

[PARA]OA MFLOWDS CP[/PARA] can not be the same with any Port Queue DSCP of IPPATH, or any DSCP used in [MML]AD D TRMMAP[/ MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

None

-

None

Port Queue

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

dB

4

4

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1756页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-4

-4

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

4

4

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-4

-4

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1757页,共3267页

162734118.xls.ms_office1

文档密级:

dB

2

2

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-2

-2

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1758页,共3267页

162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] and [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Olc PeriodTime rLen[/PAR A] > 2 x 60 x 1000 x [PARA]Mi nForUlBasi cMeas[/PA RA]; [PARA]Olc PeriodTime rLen[/PAR A] > 2 x 60 x 1000 x

文档密级:

ms

-

3000

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1759页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1760页,共3267页

162734118.xls.ms_office1

文档密级:
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. The parameter modificatio n has no impact on the equipment.

None

-

None

Optical Port None

Not involved

Not involved

Not involved

None

-

R5_PosData RNC _SWITCH

None

N (no impact on the UE in idle mode)

Not involved

Not involved

None

-

None

degree

-

None

When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to AOUa or POUa, and Correspondi the ng optical [PARA]PS[ port /PARA] in [MML]SET OPT[/MML ] is set to ALL, the optical interface standard should be set. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is Cell set to BOTH or CELL_CEN TER

Not involved

Not involved

Not involved

The settings of the local end and the peer end should be consistent.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1761页,共3267页

162734118.xls.ms_office1

文档密级:

None

Step_by_Ste Step_by_Ste RNC p p

None

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

None

ACTIVE

ACTIVE

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

UE_ASSIS RNC TED

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1762页,共3267页

162734118.xls.ms_office1

文档密级:

None

NOT_FOR NOT_FOR RNC BIDDEN BIDDEN

This parameter is valid when the OVERLAY _SWITCH is ON. The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

LOCAL

LOCAL

AAL2 Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

YES

YES

Services carried on the network element None with the specific ATM address.

N (No impact on the UE in connected mode and the UE in idle mode)

Not involved

Not involved

This parameter is modified according to actual networking.

8/7/2013

华为机密,未经许可不得扩散

第1763页,共3267页

162734118.xls.ms_office1

文档密级:

None

DISABLED DISABLED IP Path

None

N (No impact on the UE in connected mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to AAL2 AAL2PAT Path(LOP H, the VCL,ADD AAL2 path AAL2PAT ID should Not H) be set. involved When the AAL2PAT value of H(ACT [PARA]LN VCLCC) KT[/PARA] in [MML]LOP VCL[/MML ] is set to AAL2PAT H, the value of [PARA]PA THID[/PAR A] should IP Path(ADD IPPATHBI ND,ADD IPPATH) IP path(ACT IPPM)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1764页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

QOS

IP Path

When the value of [PARA]AN I[/PARA] in [MML]AD D IPPATH[/ MML] is set Not to IUPS,the involved value of [PARA]PA THT[/PAR A] must be set to RT/NRT/Q OS.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] DPUb, the value of [PARA]PA TTYPE[/P ARA]

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1765页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-20

-20

Transport channel

None

N (Impact on page message Not receiving of involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1766页,共3267页

162734118.xls.ms_office1
1. The value of this parameter must satisfy the following relationship: [PARA]Mi nPCPICHP ower[/PAR A] <= [PARA]PC PICHPower [/PARA] <= [PARA]Ma xPCPICHP ower[/PAR A] 2. To modify the PCPICH power, the intrafrequency load balance algorithm of the cell should be disabled. You can use [MML]LST CELLALG

文档密级:

dBm

330

330

Cell

N (Impact on pilot message Not receiving of involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1767页,共3267页

162734118.xls.ms_office1

文档密级:

dB

2

2

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1768页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index

1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to CBR or RTVBR or NRTVBR and Not [PARA]UT involved [/PARA] is selected, this parameter should be set. 2.[PARA]P CR[/PARA] must be larger than [PARA]SC R[/PARA].

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1769页,共3267页

162734118.xls.ms_office1
PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH: OFF, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH:ON, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH:ON, RNC PC_EFACH _ECN0_DY N_ADJ_S WITCH:OF F, PC_FP_MU LTI_RLS_I ND_SWIT CH:ON, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH:OF F, PC_HSUPA

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

5

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

1000

1000

Ethernet port

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

byte

128

128

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1770页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

The parameter must not be the same as Not any IP involved address that has been configured in the RNC.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

MLPPP Group, MLPPP Link

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

SCTP

None

Y

Services that the SCTP link bears

The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.

8/7/2013

华为机密,未经许可不得扩散

第1771页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

SCTP

None

Y

Services that the SCTP link bears

The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.

None

-

None

RNC(ADD IPOAPVC) IPOA(LOP VCL) Global(AC T VCLCC)

When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to IPOAPVC,t he value of [PARA]PE ERIPADDR [/PARA] should be Not set. involved When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to IPOAPVC, the peer IP address should be

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1772页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

IP Path

[PARA]IPA DDR[/PAR A] and [PARA]PE ERIPADDR [/PARA] in [MML]AD D IPPATH[/ MML] must be at one network segment;([P ARA]IPAD Not DR[/PARA involved ],[PARA]P EERIPADD R[/PARA],[ PARA]PEE RMASK[/P ARA] in [MML]AD D IPPATH[/ MML]) conflicts with other IPPATH whose type is IUPS. N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

Invalid

Invalid

Cell

None

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1773页,共3267页

162734118.xls.ms_office1

文档密级:

None

255.255.255 255.255.255 IP Path .255 .255

([PARA]IP ADDR[/PA RA],[PARA ]PEERIPA DDR[/PAR A],[PARA] PEERMAS K[/PARA] Not involved in [MML]AD D IPPATH[/ MML]) conflicts with other IP Path whose type

Not involved

Not involved

This parameter cannot be modified.

None

-

None

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SCTP

None

Y

Services that the SCTP link bears

None

-

None

NodeB

None

N (No impact on the UE in idle mode)

Not involved

The SCTP port number is the The parameter services are that should interrupted be until the negotiated SCTP link with the is working peer end normally. before modificatio n. The parameter modificatio Not n has no involved impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1774页,共3267页

162734118.xls.ms_office1
Only when [PARA]PE ERT[/PAR A] is selected to be IUB, the IPOAPVC can be added to a virtual port.

文档密级:

None

-

None

IPoA PVC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

s

30(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) 30 -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

30

30

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1775页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D4000

D4000

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1776页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D4000

D4000

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

RAB

This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1777页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.

文档密级:

None

1

1

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

5

5

IP Path

N (No impact on services when the Ping detection succeeds)

Not involved

Not involved

When the network is in poor running status, the detection period cannot be set to a small value. If the value is too small, the path status may be affected.

8/7/2013

华为机密,未经许可不得扩散

第1778页,共3267页

162734118.xls.ms_office1

文档密级:

ms

1(ADD CELLINTE RFREQHO COV) 1 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1779页,共3267页

162734118.xls.ms_office1

文档密级:

ms

4(ADD CELLINTE RFREQHO NCOV) 4 -(SET INTERFRE QHONCOV )

Cell(ADD CELLINTE RFREQHO NCOV) None RNC(SET INTERFRE QHONCOV )

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

1(ADD CELLINTE RRATHOC OV) 1 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1780页,共3267页

162734118.xls.ms_office1

文档密级:

ms

4(ADD CELLINTE RRATHON COV) 4 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) None RNC(SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D16(ADD CELLINTR AFREQHO ) D16 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D16(ADD CELLINTR AFREQHO ) D16 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1781页,共3267页

162734118.xls.ms_office1

文档密级:

None

D64(ADD CELLINTR AFREQHO ) D64 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

150

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1782页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Physical channel

This parameter is valid when [PARA]Acc essServiceC lass[/PARA ] is set to ASC2,ASC 3,ASC4,AS C5,ASC6 or ASC7.

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

Enable

Enable

PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)

None

Y

PPP link

Interrupt the service until negotiate successfully again.

Modify this parameter will cause failure in negotiation.

None

-

None

IP path

When the value of [PARA]ISQ OSPATH[/ PARA] in [MML]AC Not T involved IPPM[/MM L] is set to YES, this parameter should be set.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1783页,共3267页

162734118.xls.ms_office1
1.The phb of the traffic's transmissio n path is determined like this: if the phb of this transmissio n path is QOS, use the traffic's phb from Not TRMMAP; involved if the phb of this transmissio n path is BE,AF11,A F12,AF13, AF21,AF22 ,AF23,AF3 1,AF32,AF 33,AF41,A F42,AF43,E F, use the phb of transmissio

文档密级:

None

-

None

Board

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1784页,共3267页

162734118.xls.ms_office1
-(ADD FACH,AD D PICH,ADD PCH,ADD SCCPCHTF C,ADD SCCPCHB ASIC) 3(ADD PCCPCH) 6(ADD AICH) 4(ADD PRACHBA SIC,ADD PRACHTF C,ADD PRACHAS C,ADD PRACHSL OTFORMA T,ADD PRACHAC TOASCMA P,ADD RACH) 2(ADD PCPICH) 0(ADD PSCH) 1(ADD None(ADD FACH,AD D PRACHAC TOASCMA P,ADD PCH,ADD SCCPCHTF C,ADD PCCPCH,A DD SCCPCHB ASIC) 6(ADD AICH) 4(ADD PRACHBA SIC,ADD PRACHTF C,ADD PRACHAS C,ADD PRACHSL OTFORMA T,ADD RACH) 2(ADD PCPICH) 8(ADD PICH) 0(ADD PSCH) None Physical channel(AD D SSCH,ADD PSCH,ADD PRACHBA SIC,ADD PRACHTF C,ADD FACH,AD D PICH,ADD PRACHAS C,ADD PRACHSL OTFORMA None T,ADD PCH,ADD SCCPCHTF C,ADD PCPICH,A DD RACH,AD D AICH,ADD PCCPCH,A DD SCCPCHB ASIC) Cell(ADD PRACHAC TOASCMA Cell None

文档密级:

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

Not involved

Not involved

Not involved

None

10

10

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

V36

V36

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1785页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-7

-7

Cell

None

N (Impact on page message Not receiving of involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

10

10

RNC

None

Y

Port

The time between deactivate and activate the port. The time between deactivate and activate the port.

This parameter cannot be modified.

byte

128

128

RNC

None

Y

Port

This parameter cannot be modified. This parameter cannot be modified.

byte

128

128

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1786页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

byte

56

56

Ethernet port

None

Not involved

Not involved

Not involved

byte

128

128

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

RNC

The value of this parameter must satisfy the following Not relationship: involved [PARA]Plm nValTagMa x[/PARA] > [PARA]Plm nValTagMi n[/PARA]. The value of this parameter must satisfy the following Not relationship: involved [PARA]Plm nValTagMa x[/PARA] > [PARA]Plm nValTagMi n[/PARA].

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1787页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. If the Ip path is configured on logic port, this parameter must be less than [PARA]PL PRD[/PAR A] and [PARA]LA TPRD[/PA RA] in command [MML]AD D IPLOGICP ORT[/MML

文档密级:

ms

10

10

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per mill

30

30

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

1

1

IP path

N (No impact on the UE in idle mode)

Not involved

Not involved

This IP path must be already configured. Before modify, the IPPM of the IPPATH should be deactivate and activate again.

8/7/2013

华为机密,未经许可不得扩散

第1788页,共3267页

162734118.xls.ms_office1
Ethernet port(ADD ETHIP,AD D ETHREDP ORT,ACT ETHPORT, SET ETHPORT) Port(SET MSP,SET MSPCMD) RNC(SWP ETHPORT, CLR MSPREP) Loopback optical port(SET OPTLOP) Optical port(ACT MSP) When the value of [PARA]PS[ /PARA] in [MML]SET OPT[/MML ] is SINGLE, the port number should be set. When the value of [PARA]LS[ /PARA] in Not [MML]SET involved COPTLNK[ /MML] is set to PORT or SINGLE, the parameter [PARA]PN[ Correspondi /PARA] ng optical should be port(SET set. OPT) When the Optical value of Port(SET [PARA]CH COPTLNK) KTYPE[/P LGC ARA] in RNC None Not involved

文档密级:

None

-

None

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1789页,共3267页

162734118.xls.ms_office1
The time between deactivate and activate the port.

文档密级:

None

-

None

RNC

None

Y

Port

This parameter cannot be modified.

None

-

None

Ethernet port

When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to SBFD or ARP, the Ethernet port number should be set. None Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SRB

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1790页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

50

RNC

The value of this parameter must be set to meet the following conditions: 100 x [PARA]Ma xQueueTim eLen[/PAR A] > [PARA]Poll TimerLen[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

UNI: 750 NNI: 100

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1791页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter can be added or modified but cannot be removed.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

None

CLOSE

CLOSE

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1792页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

In signaling transmissio n mode, set PowerOffse tPpm to -3; Physical in service channel transmissio n mode, set PowerOffse tPpm to -2.

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1793页,共3267页

162734118.xls.ms_office1

文档密级:

dB

2

2

Physical channel

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1794页,共3267页

162734118.xls.ms_office1

文档密级:
The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. This parameter cannot be modified.

None

-

None

RNC

When the value of [PARA]US EPPP[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

LGC port

None

Not involved

Not involved

Not involved

None

-

None

The parameter PPP [PARA]PP Link(ADD PLNKN[/P PPPLNK) Not ARA] of MLPPP involved PPP link Link(ADD and MLPPP MPLNK) link can not be the same.

Not involved

Not involved

This parameter cannot be modified.

None

Enable

Enable

PPP Link(ADD PPPLNK) MLPPP None Group, PPP Link(ADD MPGRP)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1795页,共3267页

162734118.xls.ms_office1
When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set.

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter can be added or modified but cannot be removed.

None

4

4

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

ms

D500(ADD CELLMBD RINTERFR EQ,ADD CELLINTE D500 RFREQHO COV) -(SET INTERFRE QHOCOV)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1796页,共3267页

162734118.xls.ms_office1

文档密级:

None

20

20

Physical channel

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1797页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, Physical SIGNATU channel RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1798页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

HIGH

HIGH

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1799页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified. This parameter cannot be modified. Modifying this parameter may affect the routing priority when there are multiple routes to the same destination signaling point.

None

-

None

IP Route

None

Not involved

Not involved

Not involved

None

0

0

MTP3(AD D MTP3LNK) None Priority for the link(ADD

N (No impact on the UE in idle mode)

Not involved

Not involved

None

0

0

RNC(ADD MTP3RT) The route to the specific None M3DE decides the sequence.(A DD M3RT)

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1800页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ARP

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1801页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1802页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1803页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1804页,共3267页

162734118.xls.ms_office1

文档密级:
All the switches have multiple choices. SELECT ALL means turning on all the switches; CLEAR ALL means turning off all the switches; GRAYED ALL means keeping the original states of all the switches. If the SYS_INFO _UPDATE_ FOR_IU_R ST switch is turned off, the BARRED_ CELL_FOR _CSDOMA

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

ITUT

ITUT

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1805页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure conversatio nal services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversatio nal services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1806页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1807页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

When the value of [PARA]BT[ /PARA] in [MML]SET Correspondi OPT[/MML Not ng optical involved ] is set to port AOUa or POUa, the port select should be set.

Not involved

Not involved

This parameter cannot be modified.

None

CORRM_S CORRM_S RNSR_PSB RNSR_PSB RNC E_RELOC E_RELOC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1808页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1809页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF13. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF13. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1810页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF13; transimssio RNC n type is Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1811页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

-50

-50

Physical channel

None

N (Impact on network Not searching of involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1812页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1813页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1814页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1815页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1816页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

60(ADD CELLINTE RRATHON COV) 60 -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) RNC(SET INTERRAT HONCOV)

This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] in [MML]SET INTERRAT HONCOV[/ MML] is set to ON. This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] is set to ON.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1817页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure conversatio nal services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversatio nal services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1818页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

20

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1819页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

20

RNC

1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The settings of PsInfoUpdF lag is valid only when the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the

8/7/2013

华为机密,未经许可不得扩散

第1820页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

900

RNC

PsInfoUpdT mr needs to be set when [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to ON; PsInfoUpdT mr does not need to be set when [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.

N (No impact on the UE in idle mode)

Not involved

Not involved

The settings of PsInfoUpdT mr is valid only when the value of [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON.The parameter modificatio n has no impact on the equipment. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1821页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1822页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1823页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1824页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1825页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1826页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1827页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1828页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R5 or any later version, PsNriCfgM ode may be set to SUPP_IUF LEX.The parameter modificatio n has no impact on the equipment. When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R6 or any later

None

30

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

SUPP_NO NE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1829页,共3267页

162734118.xls.ms_office1

文档密级:
The settings of PSNRILeng th is valid only when the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the

None

-

None

RNC

PSNRILeng th needs to be set when [PARA]PsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to ON; PSNRILeng th does not need to be set when [PARA]PsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

40

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1830页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

200

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1831页,共3267页

162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.

文档密级:

None

-

TRUE(SET DSACAUT OALGO) None(ADD RNC CELLDSA CMANUA LPARA)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OFF

OFF

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1832页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1833页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1834页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1835页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1836页,共3267页

162734118.xls.ms_office1
PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH:OFF, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH:OFF,PS _BE_IU_Q OS_NEG_S WITCH:OF F,PS_RAB_ DOWNSIZI NG_SWIT RNC CH:ON, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH:O FF, PS_STREA M_IU_QOS _NEG_SWI TCH:OFF, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH: OFF

文档密级:

None

-

PS_RAB_D OWNSIZIN G_SWITC H is valid when DRA_DCC C_SWITCH is set to ON.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

-

None

SRB

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1837页,共3267页

162734118.xls.ms_office1

文档密级:
The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each

None

-

None

RNC

When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1838页,共3267页

162734118.xls.ms_office1

文档密级:
The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each

None

-

None

RNC

When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1839页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1840页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

When the value of [PARA]BR DTYPE[/P ARA] in [MML]SET ETHPORT[ /MML] is set to FG2a, the port type should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

32

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1841页,共3267页

162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Puc PeriodTime rLen[/PAR A] > 2 x 60 x [PARA]Mi nForDlBasi cMeas[/PA RA]; When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,the value of this parameter

文档密级:

s

-

1800

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

10

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1842页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

ALGORIT RNC HM1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

8/7/2013

华为机密,未经许可不得扩散

第1843页,共3267页

162734118.xls.ms_office1
From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA]. From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].

文档密级:

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

8/7/2013

华为机密,未经许可不得扩散

第1844页,共3267页

162734118.xls.ms_office1
From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA]. From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].

文档密级:

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.

8/7/2013

华为机密,未经许可不得扩散

第1845页,共3267页

162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, IUR, or IUCS, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD D ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2

文档密级:
When this parameter is set to CS1, the local end of the RNC uses the protocol version of CS1 to interconnect with this adjacent node; when this parameter is set to CS2, the local end of the RNC uses the protocol version of CS2 to interconnect with this adjacent node. CS2 is backward compatible with CS1 and therefore it is

None

CS2

CS2

Adjacent Node

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1846页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This paramter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to TRUE.

文档密级:

None

20

20

Cell(ADD GSMCELL, ADD CELLHCS) RNC(ADD NRNCCEL L)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1847页,共3267页

162734118.xls.ms_office1

文档密级:

dB

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

dB

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1848页,共3267页

162734118.xls.ms_office1

文档密级:

dB

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1849页,共3267页

162734118.xls.ms_office1

文档密级:

dB

0

0

Cell

None

N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose to the GSM neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose the GSM neighbourin g cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1850页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-18(ADD CELLSELR ESEL) -(ADD NRNCCEL L)

-18(ADD CELLSELR ESEL) None(ADD NRNCCEL L)

Cell(ADD CELLSELR ESEL) RNC(ADD NRNCCEL L)

This parameter is valid only when [PARA]Qq ualminInd[/ PARA] is set to TRUE.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

RNC

None

N (For the UE in idle mode, the parameter Not will impact involved the UE whether it can camp on the cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1851页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-58(ADD CELLSELR ESEL) -(ADD NRNCCEL L)

-58(ADD CELLSELR ESEL) None(ADD NRNCCEL L)

Cell(ADD CELLSELR ESEL) RNC(ADD NRNCCEL L)

This parameter is valid only when [PARA]Qrx levminInd[/ PARA] is set to TRUE.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1852页,共3267页

162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the harder the UE to reselect to this cell based on HCS algorithm. On the other hand. the Not smaller the involved value is, the easier the UE to reselect to this cell. But if the value is to small, the UE may not receive the systerm information on PCCPCH channel

文档密级:

dBm

-50

-50

Cell

None

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

Cell(ADD CELLSELR ESEL) RNC(ADD NRNCCEL L)

This parameter is valid only when [PARA]Qrx levminInd[/ PARA] is set to TRUE.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1853页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

RNC

None

N (For the UE in idle mode, the parameter Not will impact involved the UE whether it can camp on the cell.)

Not involved

The parameter modificatio n has no impact on the equipment.

None

CPICH_EC CPICH_EC Cell NO NO

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1854页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB(ADD TYPRABO LPC) (ADD TYPRABB ASIC,ADD TYPRABH SPA,ADD None. TYPRABR LC,ADD TYPRABD CCCMC) RNC(ADD TYPRABQ UALITYM EAS)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1855页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU P,ADD RAC) Cell(ADD GSMCELL)

This paramter is valid only when Not [PARA]Cfg involved RacInd[/PA RA] is set to REQUIRE.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1856页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

SELECT ALL

Physical channel

None

N (Impact on random Not access for involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1857页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

30000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The value of RafcTmr can be negotiated with the value of [PARA]Rat cTmr[/PAR A] in [MML]SET IUTIMERA NDNUM[/ MML]; thus, the RNC can successfully initiate the reset before the CN reset response timer expires.The parameter modificatio n has no impact on the equipment. If the RAN Sharing Support and MOCN Support are both switched off,Redunda nt operators should be removed by [MML]RM V CNOPERA TOR[/MML ] and only one operator can exist.

None

-

NO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1858页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

120000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The value of RatcTmr can be negotiated with the value of [PARA]Raf cTmr[/PAR A] in [MML]SET IUTIMERA NDNUM[/ MML]; thus, the CN can successfully initiate the reset before the RNC reset response timer expires.The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1859页,共3267页

162734118.xls.ms_office1

文档密级:

None

230(ADD 230(ADD PCH,ADD PCH,ADD Transport FACH) FACH) channel 1(ADD 1(ADD RACH) RACH)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

ms

5000

5000

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1860页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

68

68

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1861页,共3267页

162734118.xls.ms_office1

文档密级:

ms

3000

3000

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1862页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE reconfigurat ion does not work. (For example, when the channel change form DCH to FACH or the channel

8/7/2013

华为机密,未经许可不得扩散

第1863页,共3267页

162734118.xls.ms_office1

文档密级:
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE release does not work. (For example, when the channel change form DCH to FACH or the channel change from

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1864页,共3267页

162734118.xls.ms_office1

文档密级:
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE setup does not work. (For example, when the channel change form DCH to FACH or the channel change from

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

96

96

LGC port

When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1865页,共3267页

162734118.xls.ms_office1
The value of this parameter must be larger than the value of the [PARA]Up LimitCounti ngTime[/PA RA] parameter under the [MML]SET RNCMBM SPARA[/M ML] command.

文档密级:

s

-

6

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

130

130

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1866页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]R ECOVERT HD[/PARA ] must be larger than [PARA]RP TTHD[/PA RA]. None

文档密级:

per cent

30

30

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Board

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1867页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command. This parameter is valid when

文档密级:

None

-(ADD CELLREDI RECTION, SET REDIRECT ION,SET DRD)

DependOn NCell(ADD CELLDRD, SET DRD) None(ADD CELLREDI RECTION, DependOn SET NCell(ADD REDIRECT CELLDRD) ION)

RNC(SET REDIRECT ION,SET DRD) Cell(ADD CELLREDI RECTION, ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1868页,共3267页

162734118.xls.ms_office1
This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 1. This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 2. If the value of this parameter is set in both

文档密级:

per cent

-

AMR:100; Other:0(SE T RNC(SET REDIRECT REDIRECT ION) ION) Cell(ADD AMR:100; CELLREDI Other:0(AD RECTION) D CELLREDI RECTION)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1869页,共3267页

162734118.xls.ms_office1
This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 1. This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 2. If the value of this parameter is set in both

文档密级:

per cent

-

0

RNC(SET REDIRECT ION) Cell(ADD CELLREDI RECTION)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1870页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC(SET REDIRECT ION) None Cell(ADD CELLREDI RECTION)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1871页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; The value range of this parameter

文档密级:

None

-

None

RNC(SET REDIRECT ION,SET DRD) Cell(ADD CELLREDI RECTION, ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1872页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is required

文档密级:

None

-

None

RNC(SET REDIRECT ION,SET DRD) Cell(ADD CELLREDI RECTION, ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1873页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command. This parameter is valid when

文档密级:

None

-

None

RNC(SET REDIRECT ION,SET DRD) Cell(ADD CELLREDI RECTION, ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1874页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AEUa/PEU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 31. When the value of Y [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AOUa/POU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 1. When the value of [PARA]BT[ /PARA] in

文档密级:

None

-

None

board

RNC

When you set the clock source for the AEUa and the PEUa, the link number can be 0 to Less than 5 31; for the minutes AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3.

8/7/2013

华为机密,未经许可不得扩散

第1875页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AEUa/PEU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 31. When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AOUa/POU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 1. When the value of [PARA]BT[ /PARA] in

文档密级:

None

-

None

board

N (No impact on the UE in idle mode)

RNC

Not involved

When you set the clock source for the AEUa and the PEUa, the link number can be 0 to 31; for the AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3.

None

-

None

board

None

Y

RNC

This Less than 5 parameter minutes cannot be modified. This Less than 5 parameter minutes cannot be modified.

None

-

None

board

None

Y

RNC

None

-

ON

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1876页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

REHOSTRI RNC GHNOW

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

3000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

10000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1877页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

15000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

20000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

3000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

45000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

10000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1878页,共3267页

162734118.xls.ms_office1

文档密级:
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

-

2

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1879页,共3267页

162734118.xls.ms_office1
IP Route(ADD IPRT) SAALLNK/ AAL3PAT H/IPOAPV None C/VPCLCX using this ATM traffic record index(ADD ATMTRF)

文档密级:

None

-

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

-

300

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1880页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D4000(AD D CELLINTR AFREQHO D4000 ) -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1881页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D4000(AD D CELLINTR AFREQHO D4000 ) -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1882页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D1000(AD D CELLINTR AFREQHO D1000 ) -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1883页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1884页,共3267页

162734118.xls.ms_office1
RESERVE D_SWITC H_0_BIT1: OFF, RESERVE D_SWITC H_0_BIT2: OFF, RESERVE D_SWITC H_0_BIT3: OFF, RESERVE D_SWITC H_0_BIT4: OFF, RNC RESERVE D_SWITC H_0_BIT5: OFF, RESERVE D_SWITC H_0_BIT6: OFF, RESERVE D_SWITC H_0_BIT7: OFF, RESERVE D_SWITC H_0_BIT8: OFF,

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1885页,共3267页

162734118.xls.ms_office1
RESERVE D_SWITC H_1_BIT1: ON, RESERVE D_SWITC H_1_BIT2: ON, RESERVE D_SWITC H_1_BIT3: ON, RESERVE D_SWITC H_1_BIT4: ON, RNC RESERVE D_SWITC H_1_BIT5: ON, RESERVE D_SWITC H_1_BIT6: ON, RESERVE D_SWITC H_1_BIT7: ON, RESERVE D_SWITC H_1_BIT8: ON,

文档密级:

None

-

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

None

-

4294967295 RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1886页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The negotiation will be successful only when the parameter is set the same with the local and peer device. The parameter modificatio n has no impact on the equipment.

None

-

255

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

3

3

PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1887页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

文档密级:

None

1

1

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1888页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

bit

-

None

Transport channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1889页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

None

Cell

The value of this parameter must not be smaller than [PARA]Rl MinDlPwr[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1890页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

None

Cell

The value of this parameter must not be larger than [PARA]Rl MaxDlPwr[ /PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

10000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1891页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC(ADD GPS,ADD RNCBASIC ,RST IUR,ADD GSMNCEL L,ADD INTERFRE QNCELL,A DD INTRAFRE None QNCELL,A DD CELLINTR AFREQHO ) Cell(ADD SMLCCEL L) (RST RNC)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Subsystem

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

-

0

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1892页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

20

20

LGC port

1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]R ECOVERT HD[/PARA ] must be larger than [PARA]RP TTHD[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1893页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

200

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1894页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

4

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

350

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1895页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

1000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

None

-

None

When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path Y H[/MML] is set to UNI, IMA, FRAATM, or NCOPT, this parameter is valid. When the value of [PARA]RS CGRPFLA G[/PARA] in [MML]AD D AAL2 Path Y AAL2PAT H[/MML] is set to YES, this parameter is valid; the type of rscgrp must

The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.

The Less than 5 resource AAL2 Path minutes group must exist.

8/7/2013

华为机密,未经许可不得扩散

第1896页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYFLAG[ /PARA] in [MML]AD D IPPATH[/ Y MML] is set to RSCGRP, this parameter is valid;the type of rscgrp must N (No impact on the UE in idle mode)

文档密级:

None

-

None

IP Path

IP Path

The Less than 5 resource minutes group must exist.

None

SHARE

SHARE

NodeB

None

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

LGC port(ADD ATMLOGI CPORT,AD D IPLOGICP ORT)

When [PARA]ISF IRSTCLAS SE[/PARA] in [MML]AD Not D involved RSCGRP[/ Transmissio MML] is set n resource to YES, this group(ADD parameter is RSCGRP) valid.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1897页,共3267页

162734118.xls.ms_office1

文档密级:
Modifying this parameter may affect the sensitivity of SAAL link detection.

ms

-

UNI: 15000 SAAL NNI: 1500

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

OFF

OFF

RNC

When the value of [PARA]SP CBITS[/PA RA] is set Y to BIT14 or BIT24, this parameter is valid.

Not involved

Not involved

After modificatio n, the RNC should be reset. When a single link is routed to a signaling point, do not enable this switch. The restart procedure is performed when a signaling point is unavailable. For details, refer to ITUT Q704. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

-

2

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1898页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1899页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1900页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1901页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLALG OSWITCH) NodeB(AD D None NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved

None

-

None

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Change this parameter will impact the function interrelated with Parameter 1. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1902页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Change this parameter will impact the function interrelated with Parameter 10. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1903页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

0(ADD NODEBAL GOPARA, ADD CELLALG OSWITCH) -(SET CACALGO SWITCH)

0(ADD NODEBAL GOPARA, ADD CELLALG OSWITCH) None(SET CACALGO SWITCH)

Cell(ADD CELLALG OSWITCH) NodeB(AD None D NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Change this parameter will impact the function interrelated with Parameter 2. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1904页,共3267页

162734118.xls.ms_office1
Cell(ADD CELLALG OSWITCH) NodeB(AD None D NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved

文档密级:

None

0(ADD NODEBAL GOPARA, ADD CELLALG OSWITCH) -(SET CACALGO SWITCH)

0(ADD NODEBAL GOPARA, ADD CELLALG OSWITCH) None(SET CACALGO SWITCH)

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Change this parameter will impact the function interrelated with Parameter 3. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 4. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 5.

8/7/2013

华为机密,未经许可不得扩散

第1905页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 6. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 7. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 8. The parameter modificatio n has no impact on the equipment.

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1906页,共3267页

162734118.xls.ms_office1

文档密级:
Change this parameter will impact the function interrelated with Parameter 9. The value of this parameter should be consistent with the peer one.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Port

None

Y

Port

If the mode is not consistent, will interrupt service until it is consistent.

None

4294967295 4294967295 RNC

None

Y

RNC

The negotiation with the peer end is The required. It services are is interrupted recommend until the ed that this related parameter M3DE is should not available. be modified during network operation. The modificatio n of RTCPBWR atio is valid only when [PARA]RT CPSwitch[/ PARA] in [MML]AD D CNNODE[/ MML] is set to ON.The parameter modificatio n has no impact on the equipment.

None

-

1

RNC

When [PARA]RT CPSwitch[/ PARA] in [MML]AD D CNNODE[/ MML] is set to ON, RTCPBWR atio needs to be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1907页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1908页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1909页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

OFF

RNC

When [PARA]Tnl BearerType [/PARA] in [MML]AD D CNNODE[/ MML] is set to IP_TRANS, RTCPSwitc h needs to be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

The modificatio n of RTCPSwitc h is valid only when [PARA]Tnl BearerType [/PARA] in [MML]AD D CNNODE[/ MML] is set to IP_TRANS. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1910页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1911页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D16000

RNC

This parameter is valid when DRA_PS_N ON_BE_ST ATE_TRA NS_SWITC H and DRA_HSD PA_STATE _TRANS_S WITCH in [MML]SET CORRMAL GOSWITC H[/MML] are set to ON.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1912页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2DHTvmTh d[/PARA]; [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2DHTv mThd[/PAR A]; [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2CpcT vmThd[/PA RA]; [PARA]Rt DH2FTvmT hd[/PARA] This parameter is valid when DRA_PS_N ON_BE_ST ATE_TRA NS_SWITC H and DRA_HSD PA_STATE _TRANS_S WITCH in [MML]SET CORRMAL GOSWITC H[/MML] are set to ON.

文档密级:

byte

-

D64

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D5000

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1913页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2CpcT vmThd[/PA RA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1914页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2DHTv mThd[/PAR A].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1915页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2CpcTvmT hd[/PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1916页,共3267页

162734118.xls.ms_office1

文档密级:

byte

-

D1024

RNC

The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2DHTvmTh d[/PARA].

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D0

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1917页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

12

12

SCTP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

25

25

SCTP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

1000

1000

SCTP

The value to be set should be larger than the value of [PARA]RT OMIN[/PA RA] in [MML]AD D SCTPLNK[ /MML] but smaller than the value of [PARA]RT OMAX[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1918页,共3267页

162734118.xls.ms_office1
The value to be set should be larger than the value of [PARA]RT OMIN[/PA RA] in [MML]AD D SCTPLNK[ /MML]. The value to be set should be smaller than the value of [PARA]RT OMAX[/PA RA] in [MML]AD D SCTPLNK[ /MML].

文档密级:

ms

3000

3000

SCTP

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

1000

1000

SCTP

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

kbit/s

5

5

Services carried on the network element None with the specific ATM address. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D LGC port IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

Not involved

Not involved

Not involved

This parameter cannot be modified.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1919页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.

文档密级:

ms

5

5

LGC port

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

LGC port

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

kbit/s

-

None

IP Path

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1920页,共3267页

162734118.xls.ms_office1
When [PARA]GR PT[/PARA] in [MML]AD D RSCGRP[/ MML] is set to ATM or [PARA]BW MODE[/PA RA] is set to FULL_DUP LEX, this Transmissio parameter is n resource valid;The group sum of [PARA]Tx Bw[/PARA] and [PARA]Rx Bw[/PARA] in [MML]AD D RSCGRP[/ MML] of upper class RSCGRP can not less than the

文档密级:

kbit/s

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1921页,共3267页

162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is valid. When the value of [PARA]CA Y RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. 1.When the value of

文档密级:

None

-

None

SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) RNC(ADD VPCLCX) IPoA PVC(ADD IPOAPVC)

Not involved

Not involved

Related traffic record indexes must be already configured.

8/7/2013

华为机密,未经许可不得扩散

第1922页,共3267页

162734118.xls.ms_office1

文档密级:

chip

-

1172

RNC

The value of the parameter must satisfy the function below: [PARA]Rx TxtoTrig6F[ /PARA] [PARA]Rx TxtoTrig6G [/PARA] >= 256.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1923页,共3267页

162734118.xls.ms_office1

文档密级:

chip

-

876

RNC

The value of the parameter must satisfy the function below: [PARA]Rx TxtoTrig6F[ /PARA] [PARA]Rx TxtoTrig6G [/PARA] >= 256.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SAAL

When [PARA]CA RRYLNKT [/PARA] is Not SAAL or involved SAALSCTP, this parameter is valid. When[PAR A]CARRY LNKT[/PA Not RA] is involved SAAL or SAALSCTP, this parameter is

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SAAL

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1924页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to SAALLNK, the SAAL link number should be Not set. involved When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to SAALLNK, the value of [PARA]SA ALLNKN[/ PARA] should be

文档密级:

None

-

None

SAAL

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1925页,共3267页

162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR Adjacent OOTNODE Node(ADD [/PARA] in ADJNODE) [MML]AD Y D MTP3(AD ADJNODE[ D /MML] is MTP3LNK) set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH,

文档密级:

None

-

None

NodeB

For the Iub adjacent node, the SAAL link Less than 5 should stay minutes in the same subsystem as the NodeB.

None

-

None

SAAL

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1926页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

The value of this parameter is dependent on the value of [PARA]SA C[/PARA] in Not [MML]AD involved D SAC[/MML ]; This service area is not configured as a classified zone.

Not involved

Not involved

This parameter cannot be modified.

None

False

False

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1927页,共3267页

162734118.xls.ms_office1

文档密级:

chip

50

50

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1928页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to RTVBR or NRTVBR and Not [PARA]UT involved [/PARA] is selected, this parameter should be set. 2.[PARA]S CR[/PARA] must be smaller than [PARA]PC R[/PARA].

文档密级:

None

-

None

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1929页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa or AOUa, the value of [PARA]SC RAMBLES W[/PARA] can be set. When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to UOIa and the logic function type is selected,the scramble switch should be set. The parameter [PARA]SC TPLNKN[/ PARA] in [MML]AD D SCTPLNK[ /MML] When [PARA]CA RRYLNKT [/PARA] is SCTP or SAALSCTP, this parameter is valid.

文档密级:

E1T1 link(SET E1T1) None None Correspondi ng optical port(SET OPT)

Not involved

Not involved

Not involved

The scramble switch should be consistent with the interconnect ed one.

None

-

None

SCTP(ADD NCP,ADD CCP,ADD SCTPLNK) RNC(ADD M3LNK)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1930页,共3267页

162734118.xls.ms_office1

文档密级:
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWE EK" type. In this case, you must set the Interrupt benchmark the service day to (n until the 6) or earlier, parameter is where n correctly represents set. the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in This Not parameter involved cannot be modified. Not involved This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEE K, the start date should be set.

RNC

None

-

DISABLE

Port

None

Not involved

Not involved

None

-

None

Port

None

Not involved

Not involved

None

-

None

NodeB

None

N (no impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1931页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The negotiation will be successful only when the parameter is set the same with the local and peer device.

None

ALL

ALL

RNC

None

Not involved

Not involved

Not involved

None

MBMS service

MBMS service

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

PPP Link

None

Not involved

Not involved

Not involved

kbit/s

-

None

Cell(ADD CELLMBM SFACH,AD D CELLMBM SSCCPCH) None RNC(SET MTCH,SET MBMSFAC H,SET MBMSSCC PCH)

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1932页,共3267页

162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.

文档密级:

None

-(SET DRD) OFF OFF(ADD CELLDRD)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1933页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell(ADD CELLMBM SFACH,AD D CELLMBM SSCCPCH) None RNC(SET MTCH,SET MBMSFAC H,SET MBMSSCC PCH)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Adjacent Node

When the value of [PARA]NO DET[/PAR A] in [MML]AD Not D involved ADJNODE[ /MML] is set to IUPS, this parameter is valid. The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].

Not involved

Not involved

This parameter cannot be modified.

None

-

10

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1934页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

DEDICATE NodeB D

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

0

0

Cell

This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1935页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

HO_TO_G SM_SHOU LD_NOT_ RAB BE_PERFO RM

This parameter is valid when the SERVICE_ HO_BASE D_ON_RN C_SWITCH under the [PARA]Ho Switch[/PA RA] parameter is set to on through the [MML]SET CORRMAL GOWITCH [/MML] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1936页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1937页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1938页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-24(ADD CELLINTR AFREQHO ) -(SET SMLC,SET INTRAFRE QHO)

-24(SET INTRAFRE QHO,ADD CELLINTR AFREQHO ) -20(SET SMLC)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET SMLC,SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1939页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

TRUE

TRUE

Cell

None

N(For the UE in idle mode, the value of this parameter decides whether the Not UE can involved receive the information of this neighbourin g cell in SIB11.)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1940页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

Cell

None

N(For the UE in idle mode, the value of this parameter decides whether the Not UE can involved receive the information of this neighbourin g cell in SIB12.)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1941页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter cannot be set to FACH only when the [PARA]Rrc Cause[/PA RA] parameter is set to EMERGCA LLEST or MBMSCAL LEST.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1942页,共3267页

162734118.xls.ms_office1
The parameter [PARA]SIG LKSX[/PA RA] in [MML]AD D MTP3LKS[ /MML] The [PARA]SIG LKSX[/PA RA] field in Not [MML]AD involved D M3LKS[/M ML] The parameter [PARA]SIG LKSX[/PA RA] in [MML]AD D M3LKS[/M ML] None Not involved

文档密级:

None

-

None

RNC(ADD M3LNK,A DD M3LKS,AD D M3RT,AD D MTP3RT,A DD MTP3LKS) MTP3(AD D MTP3LNK)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

Not involved

Not involved

None

TRUE

TRUE

Transport channel

None

Not involved

Not involved

Not involved

None

-

None

MTP3

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1943页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].

文档密级:

kbit/s

WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1944页,共3267页

162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].

文档密级:

kbit/s

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D3.4

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

kbit/s

-

D3.4

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1945页,共3267页

162734118.xls.ms_office1

文档密级:
The source IP address must be one of the following addresses: PPP link local IP address of the PEUa/POU a/POS, MLPPP group local IP address of the PEUa/POU a, Ethernet port IP address of the FG2a/GOU a, and equipment IP address, the Trunk IP address of the FG2a/GOU a board.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1946页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1947页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1948页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1949页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

dB

0

0

Cell

This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1950页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Physical channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

0

0

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

1

1

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

2

2

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

3

3

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1951页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

B0000

B0000

RNC

None

Y

RNC

After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

8/7/2013

华为机密,未经许可不得扩散

第1952页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

WEEK

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the start type should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

None

-

All

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

None

-

May

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to Y YES and the value of [PARA]SM [/PARA] is selected, the start month should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1953页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Subsystem( ADD CBSADDR ) Sub System(SET None NCELLDE TECTSWIT CH) RNC(ADD IURCOMM SCCP) (ADD

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

VCL

When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to SAALLNK, the value of [PARA]SN[ /PARA] should be set.

N (No impact on the UE in idle mode)

Services carried on PVC

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1954页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] is set to SCUa, the value range of [PARA]SN[ /PARA] is 6 to 7. When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] is set to GCUa/GCG a, the value range of [PARA]SN[ /PARA] is 12 to 13. When the value of [PARA]BT[ /PARA] in

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Service not interrupted, but CPU will be high

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1955页,共3267页

162734118.xls.ms_office1

文档密级:
When the loopback type is changed to REMOTE_ LOOP or LOCAL_L OOP, the services will be interrupted until the loopback is cancelled.W hen the optical port is set to LOCAL_L OOP, it can not be set to REMOTE_ LOOP directly. You should set to NO_LOOP first before set to REMOTE_ LOOP. It is the same when set The standby port does not support the PING IP function.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

When [PARA]BR DTYPE[/P Subrack(A ARA] in DD BRD) [MML]AD (CLR D BRD) BRD[/MM Not RNC(ULD L] is set to a involved RSTINFO,S value, the TR slot number CPUUSAG and the ETST) backup mode are required.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1956页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified. If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Subrack(A DD ETHREDP ORT,ACT MSP) RNC(SET MSP,SWP ETHPORT, CLR MSPREP,S ET MSPCMD)

This parameter is only valid to Not AOUa/UOI involved a_ATM/PO Ua/UOIa_I P board.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1957页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Services carried on this board

When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to LOGIC,the value range of [PARA]SN[ /PARA] is 0, 2, 4, 8 to 27. Y When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to PHYSICAL ,the value range of [PARA]SN[ /PARA] is 0 to 5, 8 to 27.

RNC

Inhibition period of the board

Only the active board can be logically inhibited when you set the logical slot number of the active board. If an active board is logically inhibited, neither active board nor standby board can be physically inhibited. If the active board or the standby board is physically inhibited, it cannot be logically inhibited.

8/7/2013

华为机密,未经许可不得扩散

第1958页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

When the value of [PARA]UI NT[/PARA] in [MML]UIN BRD[/MM L] is set to LOGIC, the slot number is required and the value range is 0, 2, 4, 8 to 27. Not When the involved value of [PARA]UI NT[/PARA] in [MML]UIN BRD[/MM L] is set to PHYSICAL , the slot number is required and the value range is 0 to 5, 8 to 27.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Optical Port None

Not involved

Not involved

Not involved

1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.

8/7/2013

华为机密,未经许可不得扩散

第1959页,共3267页

162734118.xls.ms_office1
(STR IMATST,A DD PPPLNK) E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) RNC(ADD FLOW,SET BFDPROT OSW,TRC MAC,STR ETHOAML OOPTST,A DD IPPATHBI ND,ADD VLANID,A DD MPLNK,A DD DEVIP,AD D IMAGRP,A DD FRALNK,T RC IPADDR,S TR E1T1TST)

文档密级:

None

-

None

Only valid to the slot of FG2a and GOUa. For FG2a board, if the type of port 0 is GE, the Not PN cannot involved be 1~3; if the type of port 4 is GE, the PN cannot be 5~7. none

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1960页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T Not VCLCC[/M involved ML] is set to SAALLNK, the slot number of the SPUa should be None Not involved

文档密级:

None

-

None

RNC

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SAAL

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Adjacent Node

When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD Not D involved ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH, None Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SCTP

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1961页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Board

None

Not involved

Not involved

Not involved

None

-

None

MTP3

None

Not involved

Not involved

Not involved

None

-

None

RNC

SNAC needs to be set when [PARA]Sna ExistInd[/P ARA] in [MML]AD D IMSISNAM AP[/MML] is set to YES; Not SNAC does involved not need to be set when [PARA]Sna ExistInd[/P ARA] in [MML]AD D IMSISNAM AP[/MML] is set to PS_DOMAI N.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1962页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

When the value of [PARA]SP DF[/PARA] Y is set to WNF, this parameter is valid.

RNC

The services are interrupted until the signaling point is available.

After modificatio n, the RNC should be reset.

8/7/2013

华为机密,未经许可不得扩散

第1963页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

This parameter depends on network planning.

Y

RNC

The services are interrupted until the signaling point is available.

After modificatio n, the RNC should be reset.

None

-

None

RNC

When the value of [PARA]SP DF[/PARA] Y is set to DNF, this parameter is valid.

RNC

The services are interrupted until the signaling point is available.

After modificatio n, the RNC should be reset.

None

OFF

OFF

Cell

This parameter is valid when the HCS_SPD_ EST_SWIT CH is ON and [PARA]Use OfHcs[/PA RA] is USED in [MML]AD D CELLHCS[ /MML]. The HCS_SPD_ EST_SWIT CH in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1964页,共3267页

162734118.xls.ms_office1

文档密级:
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

None

WNF

WNF

RNC

None

Y

RNC

None

-

100M

Ethernet port

When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a,the value of [PARA]PT YPE[/PAR A] is set to FE,[PARA] AUTO[/PA RA] in [MML]SET ETHPORT[ /MML] is set to DISABLE,t he FE port rate can be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter must be consistent with the peer equipment.

None

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1965页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC(ADD SPG) Cell(ADD QUICKCE None. LLSETUP, ADD CELLSETU P)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter, [PARA]Tra fficClass[/P ARA], [PARA]Use rPriority[/P ARA] and [PARA]TH P[/PARA] form an SPI mapping table.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1966页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

70

70

Cell

The value of this parameter must satisfy the following relationship: [PARA]Spu cHeavy[/PA RA] >= [PARA]Spu cLight[/PA RA]; 100 >= [PARA]Spu cHeavy[/PA RA] + [PARA]Spu cHyst[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

5

5

Cell

The value of this parameter must satisfy the following relationship: [PARA]Spu cLight[/PA RA] >= [PARA]Spu cHyst[/PAR A]; 100 >= [PARA]Spu cHeavy[/PA RA] + [PARA]Spu cHyst[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1967页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

45

45

Cell

The value of this parameter must satisfy the following relationship: [PARA]Spu cHeavy[/PA RA] >= [PARA]Spu cLight[/PA RA]; [PARA]Spu cLight[/PA RA] >= [PARA]Spu cHyst[/PAR A].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-

90

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Before enabling load sharing, you need to set the [PARA]RN C_SHARE_ SWITCH[/P ARA] switch in [MML]SET RRCTRLS WITCH[/M ML] to ON.The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1968页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

DCH

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

FALSE

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1969页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]SR BMBR[/PA RA] >= [PARA]SR BGBR[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1970页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]SR BMBR[/PA RA] >= [PARA]SR BGBR[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

8/7/2013

华为机密,未经许可不得扩散

第1971页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NOCONFI G; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NOCONFI G.

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第1972页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

15

15

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

E1/T1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

One clock source can only with one priority, otherwise it is the same.

None

-

None

RNC

When the value of [PARA]MO DE[/PARA] in [MML]SET CLKMODE [/MML] is set to MANUAL, the value of this parameter should be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1973页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

The parameter must not be the same as any IP address that has been configured Not in the RNC. involved The parameter must not be the same as the internal IP address of the BAM.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Ethernet port(PING MAC) RNC(TRC MAC)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

When 2MBPS exists on the clock source, T1BPS is not allowed to be added; Not when involved T1BPS exists on the clock source, 2MBPS is not allowed to be added.

Not involved

Not involved

One clock source can only with one priority, otherwise it is the same. One backplane 8K outClock can only has one clock source.

8/7/2013

华为机密,未经许可不得扩散

第1974页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

E1/T1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

min

60

60

SAAL

When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1975页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified.

None

-

None

RNC RNC(ADD RNCCBCP UID,ADD IURCOMM SCCP,TRC IPADDR,S ET DEVPATC HPARA,A DD FLOW,AC T VCLCC,SE T BFDPROT OSW,TRC MAC,STR ETHOAML OOPTST,A DD IPPATHBI ND,ACT FAN,STR IPLOPTST, SET SCUPORT, ADD VLANID,A DD MPLNK,SE T ETHPORT,

None

Not involved

Not involved

Not involved

None

-

None

None

-

None

board

When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] is set to SCUa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, Not POUa, involved UOIa, or ALL, the value of [PARA]SR N[/PARA] should be set. When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML Y ] is set to RBS, the value of [PARA]SR N[/PARA] should be set. None Not involved

Not involved

Not involved

This parameter cannot be modified.

RNC

Less than 5 None minutes

None

-

None

RNC

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1976页,共3267页

162734118.xls.ms_office1

文档密级:
This parameter cannot be modified.

None

-

None

SAAL

None

Not involved

Not involved

Not involved

None

-

None

Adjacent Node

When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD Not D involved ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH, None Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SCTP

Not involved

Not involved

None

-

None

Transmissio n resource None group

Not involved

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

Board

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1977页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

MTP3

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

YES

RNC

Valid when [PARA]BE QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NRT

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1978页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

400

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1979页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1980页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1981页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

SRNSR_DS CR_IUR_R ESRCE_S WITCH:OF F, SRNSR_DS CR_LOC_S EPRAT_S WITCH:ON , RNC SRNSR_DS CR_PROP G_DELAY _SWITCH: OFF, SRNSR_DS CR_SEPRA T_DUR_S WITCH:ON

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1982页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

UE

SRNTI needs to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context_Gr oup; SRNTI Not does not involved need to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context or All_Context s.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1983页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

board

None

Y

RNC

If the interface board clock source of the RSS subrack is set, you can set the 8 kHz output clock source. If Less than 5 the interface minutes board clock source of the RBS subrack is set, you cannot set the 8 kHz output clock source for the backplane.

dB

-50

-50

Physical channel

None

N (Impact on network Not searching of involved UEs in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1984页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

60

board

[PARA]SS CPUAVEU SAGEALM THD[/PAR A] must be Not smaller than involved [PARA]SS CPUMAXU SAGEALM THD[/PAR A].

Not involved

Not involved

This parameter cannot be modified.

per cent

-

70

board

[PARA]SS CPUMAXU SAGEALM THD[/PAR A] must be Not greater than involved [PARA]SS CPUAVEU SAGEALM THD[/PAR A]

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1985页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]BT[ /PARA] in [MML]SET CPUTHD[/ MML] is set to DPUb, the value of [PARA]SS DSPAVEU SAGEALM THD[/PAR Not A] should involved be set. 2.[PARA]S SDSPAVE USAGEAL MTHD[/PA RA] must be smaller than [PARA]SS DSPMAXU SAGEALM THD[/PAR A]. 1.When the value of [PARA]BT[ /PARA] in [MML]SET CPUTHD[/ MML] is set to DPUb, the value of [PARA]SS DSPAVEU SAGEALM THD[/PAR Not A] should involved be set. 2.[PARA]S SDSPMAX USAGEAL MTHD[/PA RA] must be bigger than [PARA]SS DSPAVEU SAGEALM THD[/PAR A].

文档密级:

per cent

-

80

DSP

Not involved

Not involved

This parameter cannot be modified.

per cent

-

85

DSP

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1986页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

文档密级:

dB

0

0

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

127

127

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1987页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

-

None

RNC(ULD RSTINFO,S TR CPUUSAG ETST,ADD None RNCCBCP UID) NodeB(AD D NODEB)

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

03&00&00 RNC

When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the start time should be set.

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第1988页,共3267页

162734118.xls.ms_office1
1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to CBR, the rate unit should be set; when the value of [PARA]UT [/PARA] is selected, the Not peak rate involved should be set. 2.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to UBR_PLUS , the rate unit should be set; when

文档密级:

None

-

It is recommend ed that the service type of signaling link be CBR, the SAALLNK/ real-time AAL2PAT service be H/IPOAPV CBR or C/VPCLCX RTVBR, using this the non-realATM traffic time service record index be NRTVBR, and the OAM data link be UBR_PLUS .

Not involved

Not involved

This parameter cannot be modified.

None

-

500

RNC

Restriction: [PARA]Sta BlkNum5A[ /PARA] >= [PARA]Thd 5A[/PARA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1989页,共3267页

162734118.xls.ms_office1

文档密级:

None

ACTIVE

ACTIVE

Cell

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

None

Cell

min

-

None

Cell

min

-

None

Cell

This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_3.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

20000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1990页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. For parameter modificatio n, refer to ITU-T Q.2110.

s

20

20

SCCP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

67

67

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

OFF

OFF

RNC

When the value of [PARA]DP CT[/PARA] is set to IUCS, IUPS, IUR, Y IUCS_RAN AP, or IUCS_ALC AP, this parameter is valid.

RNC

After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1991页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

32

32

Cell

This parameter must satisfy the following relationship: [PARA]ST REAMMB R[/PARA] >= [PARA]ST REAMGBR [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D384

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1992页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

512

512

Cell

This parameter must satisfy the following relationship: [PARA]ST REAMMB R[/PARA] >= [PARA]ST REAMGBR [/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D16

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE(AD D CELLMBM SSCCPCH, ADD PICH,ADD FALSE AICH,ADD SCCPCHB ASIC) -(SET MBMSSCC PCH)

Physical channel

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1993页,共3267页

162734118.xls.ms_office1
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.

文档密级:

None

Cell(ADD CELLSETU STTD_not_ STTD_not_ P) Supported Supported RNC(ADD NRNCCEL L)

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

None

RAB(ADD TYPRABO LPC) None. (ADD TYPRABR LC)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1994页,共3267页

162734118.xls.ms_office1
When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES,this parameter is valid.

文档密级:

byte

127

127

IP Path

N (No impact on the UE in connected mode and the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

None

False

False

Cell

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

None

FALSE

FALSE

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1995页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

NO

NO

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

board

None

N (No impact on the UE in idle mode)

RNC

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第1996页,共3267页

162734118.xls.ms_office1
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R99, set SupportCR Type to CR527_SU PPORT or CR527_NO T_SUPPOR T; when [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R4, set SupportCR Type to CR528_SU PPORT or CR528_NO T_SUPPOR T; when [PARA]CN

文档密级:
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R99, SupportCR Type is CR527_SU PPORT or CR527_NO T_SUPPOR T; when [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R4, SupportCR Type is CR528_SU PPORT or CR528_NO T_SUPPOR T; when [PARA]CN

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

FALSE

FALSE

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第1997页,共3267页

162734118.xls.ms_office1

文档密级:

None

FALSE

FALSE

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SRB

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

SUN

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEE K, the start week should be set. Not involved

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第1998页,共3267页

162734118.xls.ms_office1

文档密级:
The modificatio n of Switch3GP P25415CR0 125 is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNNODE[/ MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment. This parameter is based on actual networking.

None

-

OFF

RNC

When [PARA]CN DomainId[/ PARA] in [MML]AD D CNNODE[/ MML] is set to CS_DOMA IN, Switch3GP P25415CR0 125 needs to be set.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

YES

YES

SCTP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

10

10

SCTP

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter is based on actual networking.

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

Change this parameter will impact the patch function controlled by switch 1.

8/7/2013

华为机密,未经许可不得扩散

第1999页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

RNC

None

Not involved

Not involved

Not involved

Change this parameter will impact the patch function controlled by switch 10. Change this parameter will impact the patch function controlled by switch 2. Change this parameter will impact the patch function controlled by switch 3. Change this parameter will impact the patch function controlled by switch 4. Change this parameter will impact the patch function controlled by switch 5. Change this parameter will impact the patch function controlled by switch 6.

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

None

OFF

OFF

RNC

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2000页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

RNC

None

Not involved

Not involved

Not involved

Change this parameter will impact the patch function controlled by switch 7. Change this parameter will impact the patch function controlled by switch 8. Change this parameter will impact the patch function controlled by switch 9.

None

0

0

RNC

None

Not involved

Not involved

Not involved

None

0

0

RNC

None

Not involved

Not involved

Not involved

None

-

FIRST

RNC

When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to WEEK, the start week sequence should be set. N (No impact on the UE in idle mode)

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

None

-

60

RNC

None

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2001页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)

Not involved

Not involved

None

None

-

None

RNC

None

Not involved

Not involved

None

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. None

min

-

10

RNC

None

N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

None The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

None

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第2002页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

180

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2003页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2004页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D2000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2005页,共3267页

162734118.xls.ms_office1

文档密级:
T302 broadcast in the SIB1 = Roundup {[timer 302 [ms]] + 2 x [Iub transmissio n delay]}. [timer 302 [ms]] is configured through the SET CONNMO DETIMER command. [Iub transmissio n delay] is the Iub transmissio n delay configured through the ADD NodeB command. Roundup means rounding up and

ms

-

D2000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2006页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D2000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

-

D30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2007页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

D40

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2008页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

6

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

3

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2009页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

D0

RNC

T314 should be set greater than T302*N302

N (No impact on the UE in idle mode)

Not involved

Not involved

The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302 .The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2010页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

D0

RNC

T315 should be set greater than T302*N302

N (No impact on the UE in idle mode)

Not involved

Not involved

The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302 .The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2011页,共3267页

162734118.xls.ms_office1

文档密级:

s

-

D30

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

min

10

10

RNC

T3212 needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN; T3212 does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.

N (Changing the time for the UE in Not idle mode to involved initiate periodical location update)

Not involved

The modificatio n of T3212 is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2012页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D600

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2013页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2014页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

-

10

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) None RNC(SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2015页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) None RNC(SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2016页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2017页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2018页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -12 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2019页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -92 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2020页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

16(ADD CELLINTE RRATHOC OV) 16 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2021页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

16(ADD CELLINTE RRATHOC OV) 16 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2022页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

16(ADD CELLINTE RRATHOC OV) 16 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2023页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2024页,共3267页

162734118.xls.ms_office1
Configured to 1 when TFsNumber is 1;Configure d to 0 when TFsNumber is 2 or Transport 3(ADD channel FACHDYN TFS) None(ADD PCHDYNT FS) 1(ADD RACHDYN TFS)

文档密级:

None

-

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

1(ADD PCHDYNT FS,ADD FACHDYN TFS) 2(ADD RACHDYN TFS)

1(ADD PCHDYNT FS,ADD FACHDYN Transport TFS) channel 2(ADD RACHDYN TFS)

This paramter is valid only when Not [PARA]TFs involved Number[/P ARA] is set to D2 or D3.

Not involved

Not involved

This parameter cannot be modified.

None

2

2

Transport channel

This paramter is valid only when Not [PARA]TFs involved Number[/P ARA] is set to D3.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2025页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2026页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2027页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2028页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

170

170

MTP3

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2029页,共3267页

162734118.xls.ms_office1

文档密级:

chip

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

None

-

None

Cell

This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to 3GCELL.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

10

10

MTP3

None

N (No impact on the UE in idle mode)

Not involved

Not involved

s

D60

D60

Cell

This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2030页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.

文档密级:

s

D20

D20

Cell

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

NotUsed

NotUsed

Cell

This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

s

NotUsed

NotUsed

Cell

This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2031页,共3267页

162734118.xls.ms_office1

文档密级:

s

60(ADD CELLHCS HO) 60 -(SET HCSHO)

Cell(ADD CELLHCS HO) RNC(SET HCSHO)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

degree Celsius

45

45

SRB

None

Not involved

Not involved

Not involved

None

degree Celsius

0

0

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第2032页,共3267页

162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbourin g cell. On the other hand. the Not smaller the involved value is, the higher the possibility for the UE to select to this neighbourin g cel. If the value is INFINITY, the UE can never choose this neighbourin g cell to

文档密级:

dB

D3

D3

Cell

This parameter is valid when [PARA]Tpe naltyHcsRe select[/PAR A] is not set to D0.

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2033页,共3267页

162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbourin g cell. On the other hand. the Not smaller the involved value is, the higher the possibility for the UE to select to this neighbourin g cel. If the value is INFINITY, the UE can never choose this neighbourin g cell to

文档密级:

dB

D2

D2

Cell

This parameter is valid when [PARA]Tpe naltyHcsRe select[/PAR A] is not set to D0.

Not involved

The parameter modificatio n has no impact on the equipment.

ms

480(ADD CELLQUA LITYMEA S) 480 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orAmrE[/P ARA] is set to TEN_MSE C

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2034页,共3267页

162734118.xls.ms_office1

文档密级:

ms

480(ADD CELLQUA LITYMEA S) 480 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orBeE[/PA RA] is set to TEN_MSE C

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

480(ADD CELLQUA LITYMEA S) 480 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orBeF[/PA RA] is set to TEN_MSE C

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2035页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,and it must satisfy the following relationship: [PARA]Ten MsecForDl BasicMeas[ /PARA] < [PARA]Intr aFreqLdbPe riodTimerL en[/PARA] x 1000/2 (See [MML]SET LDCPERIO D[/MML] and [MML]SET SATLDCP ERIOD[/M This parameter is valid only when [PARA]Cho iceRprtUnit ForDlOlcM eas[/PARA] is set to TEN_MSE C. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaR ateMeas[/P ARA] is set to TEN_MSE C.

文档密级:

ms

-

20(SET LDM) RNC 100(SET SATLDM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

20(SET LDM) RNC 100(SET SATLDM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

100(SET LDM) 10(ground circuit)/100( RNC satellite transmissio n)(SET SATLDM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2036页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaP wrMeas[/P ARA] is set to TEN_MSE C. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsupaR ateMeas[/P ARA] is set to TEN_MSE C.

文档密级:

ms

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2037页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] is set to TEN_MSE C,and it must satisfy the following relationship: [PARA]Ten MsecForUl BasicMeas[ /PARA] < [PARA]Ldr PeriodTime rLen[/PAR A] * 1000/2 (See [MML]SET LDCPERIO D[/MML] and [MML]SET SATLDCP ERIOD[/M ML]); This parameter is valid only when [PARA]Cho iceRprtUnit ForUlOlcM eas[/PARA] is set to TEN_MSE C.

文档密级:

ms

-

20(SET LDM) RNC 100(SET SATLDM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

20(SET LDM) RNC 100(SET SATLDM)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2038页,共3267页

162734118.xls.ms_office1

文档密级:

ms

480(ADD CELLQUA LITYMEA S) 480 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) RNC(SET QUALITY MEAS)

Valid when [PARA]Cho iceRptUnitF orVpE[/PA RA] is set to TEN_MSE C

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

180(ADD CELLHCS HO) 180 -(SET HCSHO)

The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2039页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

EXISTS

Physical channel

This parameter is valid only when [PARA]Slot Not Format[/PA involved RA] is equal to or more than D8.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Transport channel

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

280

RNC

Restriction: [PARA]Sta BlkNum5A[ /PARA] >= [PARA]Thd 5A[/PARA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2040页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

None

RNC

Restriction: [PARA]Thd Ea[/PARA] <= [PARA]Thd Eb[/PARA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

None

RNC

Restriction: [PARA]Thd Ea[/PARA] <= [PARA]Thd Eb[/PARA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2041页,共3267页

162734118.xls.ms_office1
This parameter, [PARA]Tra fficClass[/P ARA], [PARA]Use rPriority[/P ARA], and [PARA]SPI [/PARA] form an SPI mapping table. This parameter is required when the [PARA]Tra fficClass[/P ARA] parameter is set to INTERACT IVE.

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

Medium

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Low

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Low

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Low

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2042页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

Low

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Low

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

High

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

High

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

High

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

High

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

High

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2043页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

Medium

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Medium

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Medium

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

Medium

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2044页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Tra fficClass[/P ARA] parameter is set to INTERACT IVE; The mapping relationship between the traffic handling priority value of INTERACT IVE service and its correspondi ng class can be set through command [MML]SET IAVUSERT HPCLASS[/ MML].

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

2000

2000

Ethernet port

None

Not involved

Not involved

Not involved

s

2

2

Ethernet port

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

s

-

None

Cell

This paramter is valid only when [PARA]Prio Not involved rity(BLK CELL)[/PA RA] is set to NORMAL.

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2045页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment. The parameter modificatio Not Not n has no involved involved impact on the equipment.

ms

10

10

AAL2 Path

None

Y

None

4

4

Ethernet port

None

Not involved

ms

0(ADD CELLINTE RFREQHO COV) 0 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) None RNC(SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2046页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

文档密级:

ms

5000

5000

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

D0(ADD CELLINTE RFREQHO COV) D0 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2047页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLINTE RFREQHO COV) D320 -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) None RNC(SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2048页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D1280(AD D CELLINTE RFREQHO D1280 COV) -(SET INTERFRE QHOCOV)

Cell(ADD CELLINTE RFREQHO COV) None RNC(SET INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2049页,共3267页

162734118.xls.ms_office1

文档密级:

ms

0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHOC OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2050页,共3267页

162734118.xls.ms_office1

文档密级:

ms

0(ADD CELLMBD RINTERFR EQ,ADD CELLINTE 0 RFREQHO COV) -(SET INTERFRE QHOCOV)

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)

This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2051页,共3267页

162734118.xls.ms_office1

文档密级:

ms

0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHOC OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2052页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D240

D240

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2053页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D2560

D2560

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

2

2

RAB

This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2054页,共3267页

162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. None The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML]. The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML].

文档密级:

None

14

14

RAB

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Adjacent Node

N (No impact on the UE in idle mode)

Not involved

Not involved

This TRMMAP must be already configured.

None

-

None

Adjacent Node

N (No impact on the UE in idle mode)

Not involved

Not involved

This TRMMAP must be already configured.

8/7/2013

华为机密,未经许可不得扩散

第2055页,共3267页

162734118.xls.ms_office1
The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML].

文档密级:

None

-

None

Adjacent Node

N (No impact on the UE in idle mode)

Not involved

Not involved

This TRMMAP must be already configured.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

MTP3B

None

N (No impact on the UE in idle mode)

RNC

Not involved

The parameter modificatio n has no impact on the equipment. Set TnlBearerT ype according to the actual used transport type.The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2056页,共3267页

162734118.xls.ms_office1

文档密级:
Set TnlBearerT ype according to the actual used transport type.The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

ATM_TRA ATM_TRA NodeB NS NS

1. If the NodeB is configured with the NCP through [MML]AD D NCP[/MML ] or configured with the CCP through [MML]AD D Y CCP[/MML ], the transmissio n type cannot be modified. 2. If a NodeB OM channel is set up, the transmissio n type cannot be modified. 3. If the NodeB is

NodeB

The services are interrupted until the cell is activated again.

Before modifying this parameter, deactivate all the cells under this NodeB.

8/7/2013

华为机密,未经许可不得扩散

第2057页,共3267页

162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] Y is set to YES, the adjust method should be set.

文档密级:

min

-

60

RNC

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

ms

-(SET MBMSFAC H,ADD FACH) 10(ADD CELLMBM SFACH,AD D PCH)

None(ADD FACH) 10(SET MBMSFAC Transport H,ADD channel CELLMBM SFACH,AD D PCH)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-(SET MBMSFAC H,ADD FACH) 35(ADD CELLMBM SFACH,AD D PCH)

None(ADD FACH) 35(SET MBMSFAC Transport H,ADD channel CELLMBM SFACH,AD D PCH)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2058页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2059页,共3267页

162734118.xls.ms_office1

文档密级:

s

D0

D0

Cell

None

N(For the UE in idle mode, the larger the value of this parameter is, the smaller the Ping-Pong effect in the cell Not reselection involved between different Hierarchy cells. But if the value is to small, the effect of the HCS algorithm is bad.)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This parameter, [PARA]Use rPriority[/P ARA], [PARA]TH P[/PARA], and [PARA]SPI [/PARA] form an SPI mapping table. None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2060页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment.

None

-

None

RNC(SET REDIRECT ION) None Cell(ADD CELLREDI RECTION)

N (No impact on the UE in idle mode)

Not involved

Not involved

None

M3UA_LO M3UA_LO ADSHARE ADSHARE RNC _MOD _MOD

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2061页,共3267页

162734118.xls.ms_office1

文档密级:

ms

10

10

NodeB

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

IP Path

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC(ADD ADJMAP,A DD TRMMAP) Adjacent Node(ADD ADJNODE)

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB, IUR or IUCS, this parameter is valid. When the value of Not [PARA]ITF involved T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB_IUR_I UCS, this parameter is valid. When the value of [PARA]NO DET[/PAR

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2062页,共3267页

162734118.xls.ms_office1

文档密级:

None

-(ADD FACHDYN TFS,ADD FACHLOC H,ADD FACH) 1(ADD RACHDYN TFS,ADD RACH) 3(ADD PCH,ADD PCHDYNT FS) 0(ADD BCH)

None(ADD FACHDYN TFS,ADD FACHLOC H,ADD FACH) 1(ADD RACHDYN Transport TFS,ADD channel RACH) 3(ADD PCH,ADD PCHDYNT FS) 0(ADD BCH)

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2063页,共3267页

162734118.xls.ms_office1

文档密级:

s

10(ADD CELLHCS HO) 10 -(SET HCSHO)

Cell(ADD CELLHCS HO) RNC(SET HCSHO)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2064页,共3267页

162734118.xls.ms_office1

文档密级:

s

1

1

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

s

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2065页,共3267页

162734118.xls.ms_office1

文档密级:

s

255

255

Cell

None

N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX None using this ATM traffic record index

Not involved

Not involved

Not involved

This parameter cannot be modified.

ms

D320(ADD CELLINTR AFREQHO ) -(SET SMLC,SET INTRAFRE QHO)

D320(SET INTRAFRE QHO,ADD CELLINTR AFREQHO ) D160(SET SMLC)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET SMLC,SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2066页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLINTR AFREQHO ) -(SET SMLC,SET INTRAFRE QHO)

D640(SET INTRAFRE QHO,ADD CELLINTR AFREQHO )

Cell(ADD CELLINTR AFREQHO ) None RNC(SET SMLC,SET INTRAFRE D1280(SET QHO) SMLC)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2067页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLINTR AFREQHO ) D640 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2068页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLINTR AFREQHO ) D640 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2069页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLINTR AFREQHO ) D640 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2070页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLINTR AFREQHO ) D640 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2071页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO D640 NCOV) -(SET INTERFRE QHONCOV )

Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO None NCOV) RNC(SET INTERFRE QHONCOV )

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2072页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLINTE RRATHOC OV) D320 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2073页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D1280(AD D CELLINTE RRATHOC D1280 OV) -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2074页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D0(ADD CELLINTE RRATHOC OV) D0 -(SET INTERRAT HOCOV)

Cell(ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2075页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLMBD RINTERRA T,ADD CELLINTE D640 RRATHON COV) -(SET INTERRAT HONCOV)

Cell(ADD CELLINTE RRATHON COV) RNC(ADD None CELLMBD RINTERRA T,SET INTERRAT HONCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2076页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D240

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2077页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

D240

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified. This parameter cannot be modified.

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2078页,共3267页

162734118.xls.ms_office1

文档密级:

s

50

50

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to 3GCELL.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2079页,共3267页

162734118.xls.ms_office1

文档密级:
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. This parameter cannot be modified.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

LGC port

None

Not involved

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2080页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

When the value of [PARA]BT[ /PARA] in [MML]LOP E1T1[/MM L] is set to Y AEUa or PEUa, the value of [PARA]TS[ /PARA] should be set.

Cell

The loopback test may Less than 5 interrupt the minutes services carried on this link.

8/7/2013

华为机密,未经许可不得扩散

第2081页,共3267页

162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa, the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to SINGLE and the Not value of involved [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME , the value of [PARA]TS 16ENABLE

文档密级:

None

-

OFF

E1T1 link

Not involved

Not involved

When the BT is AEUa and the LNKT is E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME,you could set 16TimeSlot Switch.

8/7/2013

华为机密,未经许可不得扩散

第2082页,共3267页

162734118.xls.ms_office1
1.The time slot 0 can not be configured. 2.When the value of [PARA]BR DTYPE[/P ARA] in [MML]AD D PPPLNK[/ PPP MML]is set Link(ADD to PEUa, PPPLNK) the value E1/T1 of[PARA]T Not port(ADD SBITMAP[/ involved FRALNK) PARA] RNC(ADD must be set. MPLNK) 3.When the value of [PARA]BR DTYPE[/P ARA] in [MML]AD D MPLNK[/M ML]is set to PEUa, the value of[PARA]T SBITMAP[/

文档密级:

None

-

None

Not involved

Not involved

This parameter cannot be modified.

None

-

None

E1/T1

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

None

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2083页,共3267页

162734118.xls.ms_office1
The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA]. This parameter is valid when UE [PARA]Tst Switch[/PA RA] is set to ON.

文档密级:

s

240(ADD CELLHCS HO) 240 -(SET HCSHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

30

30

Ethernet port

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

OFF

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

None

RNC

When the value of [PARA]ST PMODE[/P ARA] in [MML]STR Y CPUUSAG ETST[/MM L] is set to YES, this parameter is valid.

This Less than parameter Subsystem 10 minutes cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2084页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.

s

64

64

Ethernet port

None

Not involved

Not involved

Not involved

kbit/s

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t N (No impact on the UE in idle mode)

Not involved

kbit/s

-

None

IP Path

None

Not involved

Not involved

kbit/s

-

None

When [PARA]GR PT[/PARA] in [MML]AD D RSCGRP[/ MML] is set to ATM or [PARA]BW MODE[/PA RA] is set to FULL_DUP LEX, this Transmissio parameter is n resource valid;The group sum of [PARA]Tx Bw[/PARA] and [PARA]Rx Bw[/PARA] in [MML]AD D RSCGRP[/ MML] of upper class RSCGRP can not less than the

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2085页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.

ms

500

500

Ethernet port

None

Not involved

Not involved

Not involved

ms

30

30

Ethernet port

None

Not involved

Not involved

Not involved

None

-

None

IPoA PVC(ADD IPOAPVC) AAL2 Path(ADD AAL2PAT H) SAAL(AD D SAALLNK) RNC(ADD VPCLCX)

1.When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is required. 2.When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCP ORT, this

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2086页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

control interface link

None

Y

If the mode is not set back, will ETHPORT/ interrupt VP/LGCPO service until RT etc. it is set back.

This parameter cannot be modified.

None

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第2087页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

When [PARA]UA RFCNUplin kInd[/PAR A] is set to TRUE, this parameter need to manual Y configure;or else need to automatic configure with the restriction relation UL and DL frequency.

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

8/7/2013

华为机密,未经许可不得扩散

第2088页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Y

Cell

The services are interrupted until the cell is activated again.

The cell should be deactivated in advance.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.

byte

1031

1031

IP Path

When the value of [PARA]UD PMUXMO DRECV[/P ARA] in [MML]AD D IPPATH[/ MML] is set to RTPCOMP, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2089页,共3267页

162734118.xls.ms_office1

文档密级:

None

MUXCLOS MUXCLOS IP Path E E

When the value of [PARA]ITF T[/PARA] in [MML]AD D IPPATH[/ MML] is set to IUCS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

MUXCLOS MUXCLOS IP Path E E

When the value of [PARA]ITF T[/PARA] in [MML]AD D IPPATH[/ MML] is set to IUCS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

2

2

IP Path

When the value of [PARA]UD PMUXMO DRECV[/P ARA] in [MML]AD D IPPATH[/ MML] is set to RTPCOMP, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2090页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2091页,共3267页

162734118.xls.ms_office1

文档密级:
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

ms

-

5000

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

Not involved

Not involved

Not involved

ms

1000

1000

E1T1 Link

When the value of [PARA]BT[ /PARA] in [MML]STR Not E1T1TST[/ involved MML] is set to AEUa or PEUa, this parameter is valid. Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

SRB

None

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2092页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

50

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2093页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLQUA LITYMEA S) D320 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2094页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLQUA LITYMEA S) D320 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2095页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLQUA LITYMEA S) D320 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2096页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D320(ADD CELLQUA LITYMEA S) D320 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2097页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D240(ADD CELLQUA LITYMEA S) D240 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

10

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2098页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

D6(SET LDM) RNC D3(SET SATLDM)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2099页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-(SET FRCCHLT YPEPARA) D8 D8(ADD CELLFRC)

RNC(SET FRCCHLT YPEPARA) Cell(ADD CELLFRC)

If this parameter is set through both the [MML]SET FRCCHLT YPEPARA[ /MML] and [MML]AD D CELLFRC[/ MML] commands, the parameter set through the [MML]AD D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRCCHLT YPEPARA[ /MML] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2100页,共3267页

162734118.xls.ms_office1

文档密级:

kbit/s

-

D64

RNC

This parameter can be used for selection of the initial rate for BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter is set to on through the [MML]SET CORRMAL GOSWITC H[/MML] command.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D608

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2101页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLQUA LITYMEA S) D640 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

D1280(AD D CELLQUA LITYMEA D1280 S) -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2102页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D2560(AD D CELLQUA LITYMEA D2560 S) -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

D1280(AD D CELLQUA LITYMEA D1280 S) -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2103页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D240(ADD CELLQUA LITYMEA S) D240 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2104页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2105页,共3267页

162734118.xls.ms_office1

文档密级:

None

83

83

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA](Se e [MML]AD D CELLLDM [/MML]) >= [PARA]Ul CellTotalTh d[/PARA]; [PARA]Ul CellTotalTh d[/PARA] > [PARA]Ul NonCtrlThd ForHo[/PA RA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

SF/2

SF/2

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2106页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 3 3 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

Cell(ADD CELLLDR) None 3 3 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2107页,共3267页

162734118.xls.ms_office1
When the value of UlMidRate Calc is HAND_AP POINT,the following relationship must be satisfied: [PARA]Ul DcccRateTh d[/PARA] <= [PARA]Ul MidRateTh

文档密级:

kbit/s

-

D64

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

SILENT

RAB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

D64(ADD CELLDCC C) D64 -(SET DCCC)

This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES.

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2108页,共3267页

162734118.xls.ms_office1
For the BE users with the same [PARA]Tra fficClass[/P ARA], [PARA]TH PClass[/PA RA] and [PARA]Bea rType[/PAR A] values, make sure: [PARA]Ul GBR[/PAR A] of GOLD users ([PARA]Us erPriority[/P ARA] is set to GOLD) >= [PARA]Ul GBR[/PAR A] of SILVER users ([PARA]Us erPriority[/P ARA] is set to SILVER)

文档密级:

kbit/s

-

D64

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2109页,共3267页

162734118.xls.ms_office1

文档密级:

None

SF16

SF16

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul HoCeResvS f[/PARA] >= [PARA]UlL drCreditSfR esThd[/PA RA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2110页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

SCHEDUL RNC ED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

10

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2111页,共3267页

162734118.xls.ms_office1

文档密级:

bit/s

200000

200000

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2112页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

20

20

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2113页,共3267页

162734118.xls.ms_office1

文档密级:

None

1

1

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2114页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2115页,共3267页

162734118.xls.ms_office1

文档密级:

None

SF8

SF8

The value Cell(ADD of this CELLLDR) parameter must not be NodeB(AD larger than D [PARA]Ul NODEBLD HoCeResvS R) f[/PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2116页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2117页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2118页,共3267页

162734118.xls.ms_office1

文档密级:

None

inter-freq load handover(A DD CELLLDR) BE traff rate reduction(A DD NODEBLD R)

inter-freq load handover(A DD CELLLDR) BE traff rate reduction(A DD NODEBLD R)

Cell(ADD CELLLDR) NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2119页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2120页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2121页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

45

45

Cell

The value of this parameter must satisfy the following relationship: [PARA]UlL drTrigThd[/ PARA] >= [PARA]UlL drRelThd[/P ARA]; [PARA]Ul OlcRelThd[ /PARA] >= [PARA]UlL drRelThd[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2122页,共3267页

162734118.xls.ms_office1

文档密级:

None

BE traff rate reduction(A DD CELLLDR) no action(ADD NODEBLD R)

BE traff rate reduction(A DD CELLLDR) no action(ADD NODEBLD R)

Cell(ADD CELLLDR) NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2123页,共3267页

162734118.xls.ms_office1

文档密级:

None

no action

no action

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2124页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2125页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None no action no action NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2126页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

55

55

Cell

The value of this parameter must satisfy the following relationship: [PARA]UlL drTrigThd[/ PARA] >= [PARA]UlL drRelThd[/P ARA]; [PARA]Ul OlcTrigThd [/PARA] > [PARA]UlL drTrigThd[/ PARA]; [PARA]Ul NonCtrlThd ForOther[/P ARA](See [MML]AD D CELLCAC[ /MML]) >= [PARA]UlL drTrigThd[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D64

D64

NodeB

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2127页,共3267页

162734118.xls.ms_office1

文档密级:

None

D19(ADD CELLQUA LITYMEA S) D19 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

HAND_AP RNC POINT

The parameter is valid when [PARA]Ul RateUpAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates, or [PARA]Ul RateDnAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2128页,共3267页

162734118.xls.ms_office1
The parameter is valid when [PARA]Ul MidRateCal c[/PARA] in [MML]SET DCCC[/M ML] is set to HAND_AP POINT, and the following relationship must be satisfied: [PARA]Ul DcccRateTh d[/PARA] <= [PARA]Ul The following relationship must be satisfied: [PARA]Ul ModeChang eTimerLen[ /PARA] <= [PARA]Dl ModeChang eTimerLen[ /PARA]. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.

文档密级:

kbit/s

-

D128

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

-

1000

RNC

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2129页,共3267页

162734118.xls.ms_office1

文档密级:

None

75

75

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForAMR[/P ARA]; [PARA]Ul NonCtrlThd ForAMR[/P ARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2130页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul CellTotalTh d[/PARA] > [PARA]Ul NonCtrlThd ForHo[/PA RA] ; [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForAMR[/P ARA]; [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForNonAM R[/PARA] .

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2131页,共3267页

162734118.xls.ms_office1

文档密级:

None

75

75

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForNonAM R[/PARA]; [PARA]Ul NonCtrlThd ForNonAM R[/PARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2132页,共3267页

162734118.xls.ms_office1

文档密级:

None

60

60

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForAMR[/P ARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA]; [PARA]Ul NonCtrlThd ForNonAM R[/PARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA]; [PARA]Ul NonCtrlThd ForOther[/P ARA] >= [PARA]UlL drTrigThd[/ PARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2133页,共3267页

162734118.xls.ms_office1

文档密级:

None

3

3

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2134页,共3267页

162734118.xls.ms_office1

文档密级:

None

3

3

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

D1

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2135页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

85

85

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul OlcRelThd[ /PARA]; [PARA]Ul OlcRelThd[ /PARA] >= [PARA]UlL drRelThd[/P ARA].

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2136页,共3267页

162734118.xls.ms_office1

文档密级:

None

0

0

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2137页,共3267页

162734118.xls.ms_office1

文档密级:

per cent

95

95

Cell

The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA] > [PARA]UlL drTrigThd[/ PARA]; [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul OlcRelThd[ /PARA]; [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul NonCtrlThd ForHo[/PA RA](See [MML]AD D CELLCAC[ /MML]).

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2138页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2139页,共3267页

162734118.xls.ms_office1

文档密级:

Cell(ADD CELLLDR) None 1 1 NodeB(AD None D NODEBLD R)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2140页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

20(ADD CELLQOS HO) 20 -(SET QOSHO)

Cell(ADD CELLQOS HO) RNC(SET QOSHO)

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2141页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NO

RNC

Valid when [PARA]VP QosPerform [/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2142页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

3_Rates

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

3_Rates

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

D64(ADD CELLCMC F) D64 -(SET CMCF)

Cell(ADD CELLCMC F) None RNC(SET CMCF)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2143页,共3267页

162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to NOPRIORI TY.

文档密级:

None

-

10

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

SCHEDUL RNC ED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

100

RNC

This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GGOLD, SILVER, or COPPER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

kbit/s

-

D256

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2144页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

NONSCHEDUL RNC ED

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

None

RNC

Restriction: [PARA]UlT hd6A1[/PA RA] <= [PARA]UlT hd6B1[/PA RA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2145页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

None

RNC

Restrictions : 1) [PARA]UlT hd6A2[/PA RA] <= [PARA]UlT hd6B2[/PA RA]; 2) [PARA]UlT hd6A2[/PA RA] > [PARA]UlT hd6B1[/PA RA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

None

RNC

Restrictions : 1) [PARA]UlT hd6A1[/PA RA] <= [PARA]UlT hd6B1[/PA RA]; 2) [PARA]UlT hd6A2[/PA RA] > [PARA]UlT hd6B1[/PA RA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2146页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-

None

RNC

Restriction: [PARA]UlT hd6A2[/PA RA] <= [PARA]UlT hd6B2[/PA RA]

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2147页,共3267页

162734118.xls.ms_office1

文档密级:

None

80

80

Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

dB

-

1

RNC

This parameter can only be set to 1 when the [PARA]Pwr CtrlAlg[/PA RA] parameter is set to ALGORIT HM2.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2148页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D640(ADD CELLQUA LITYMEA S) D640 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

ms

D640(ADD CELLQUA LITYMEA S) D640 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2149页,共3267页

162734118.xls.ms_office1

文档密级:

ms

D240(ADD CELLQUA LITYMEA S) D240 -(SET QUALITY MEAS)

Cell(ADD CELLQUA LITYMEA S) None RNC(SET QUALITY MEAS)

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2150页,共3267页

162734118.xls.ms_office1
Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA]. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA]. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA].

文档密级:

m

-

None

Cell

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

m

-

None

Cell

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2151页,共3267页

162734118.xls.ms_office1
Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA].

文档密级:

m

-

None

Cell

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

UNILNK

None

N (No impact on the UE in idle mode)

Not involved

Not involved

This parameter cannot be modified.

None

-

2

RNC

None

-

None

Adjacent Node

The value of this parameter must be smaller than the value of the [PARA]Rec ountingPeri od[/PARA] parameter under the [MML]SET RNCMBM SPARA[/M ML] command. When the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD D ADJNODE[ /MML] is set to NO, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2152页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

When [PARA]ISF IRSTCLAS SE[/PARA] in Transmissio [MML]AD Not n resource D involved group RSCGRP[/ MML] is set to NO, this parameter is valid.

Not involved

Not involved

This parameter cannot be modified.

None

-

None

LGC port

None

Transmissio Not n Resource involved Managemen t

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2153页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2154页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2155页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2156页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

Cell(ADD CELLURA, ADD URA) None RNC(ADD NRNCURA )

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

Cell

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2157页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) -12 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_EC/ NO or AUTO.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2158页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -97(ADD CELLINTE RRATHOC OV)

-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -97(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_RS CP or AUTO.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2159页,共3267页

162734118.xls.ms_office1
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]. This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -13(ADD CELLINTE RRATHOC OV)

-12(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -13(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2160页,共3267页

162734118.xls.ms_office1
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]. This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -107(ADD CELLINTE RRATHOC OV)

-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -107(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2161页,共3267页

162734118.xls.ms_office1

文档密级:

None

This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] in CPICH_RS Cell(ADD [MML]SET CP(ADD CELLQOS INTERRAT CPICH_RS CELLQOS HO) HOCOV[/ CP HO) RNC(SET MML] or -(SET QOSHO) [MML]AD QOSHO) D CELLINTE RRATHOC OV[/MML] is set to EVENT_T RIGGER.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2162页,共3267页

162734118.xls.ms_office1

文档密级:

dB

-12(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -13(ADD CELLINTE RRATHOC OV)

-12(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -13(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_EC/ NO or AUTO.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2163页,共3267页

162734118.xls.ms_office1

文档密级:

dBm

-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -107(ADD CELLINTE RRATHOC OV)

-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -107(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_RS CP or AUTO.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2164页,共3267页

162734118.xls.ms_office1

文档密级:
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. The parameter modificatio n has no impact on the equipment. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

Disable

Disable

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

Cell(ADD GSMCELL, ADD NOT_USE NOT_USE CELLHCS) None D D RNC(ADD NRNCCEL L)

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2165页,共3267页

162734118.xls.ms_office1

文档密级:

None

ALL_USER ALL_USER Cell

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

per cent

-

5

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

per cent

-

90

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2166页,共3267页

162734118.xls.ms_office1
This parameter, [PARA]Tra fficClass[/P ARA], [PARA]TH P[/PARA], and [PARA]SPI [/PARA] form an SPI mapping table. None.

文档密级:

None

-

None

RNC

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

None

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. This parameter cannot be modified.

None

-

None

None

-

None

SAALLNK/ AAL2PAT H/IPOAPV Not C/VPCLCX None involved using this ATM traffic record index When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.

Not involved

Not involved

The configuratio n data must Less than 5 be AAL2 Path minutes consistent with that of the peer end.

8/7/2013

华为机密,未经许可不得扩散

第2167页,共3267页

162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M Not PVC ML] is set involved to SAALLNK, AAL2PAT H, or IPOAPVC, the VCL activating type should This parameter determines whether the parameter SCTP(ADD [PARA]VL SCTPLNK) ANID[/PA Y IP RA] in Path(ADD [MML]AD IPPATH) D SCTPLNK[ /MML] is valid.

文档密级:

None

-

CC

Not involved

Not involved

This parameter cannot be modified.

None

DISABLE

DISABLE

Services that the SCTP link bears

The services are interrupted until the SCTP link is working normally.

This parameter is based on actual networking.

8/7/2013

华为机密,未经许可不得扩散

第2168页,共3267页

162734118.xls.ms_office1
When the value of [PARA]VL ANFlAG[/P ARA] in [MML]AD D IPPATH[/ RNC(ADD MML] is set VLANID) to IP ENABLE, Path(ADD this IPPATH) parameter is Not valid. involved SCTP(ADD When the SCTPLNK) value of Ethernet [PARA]VL port(ADD ANFlAG[/P ETHMA) ARA] in [MML]AD D SCTPLNK[ /MML] is set to ENABLE, this parameter is N (No impact on the UE in idle mode)

文档密级:

None

-

None

Not involved

Not involved

If the setting is incorrect, the destination IP address may be unavailable.

None

-

None

RNC

None

Not involved

Not involved

Modify the relationship between VLAN and DSCP may interfere the network.

8/7/2013

华为机密,未经许可不得扩散

第2169页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

8/7/2013

华为机密,未经许可不得扩散

第2170页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is EF. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF. When the interface type is Iu-

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

100

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第2171页,共3267页

162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; transimssio RNC n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface

文档密级:

None

-

When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user

None

0

0

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).

8/7/2013

华为机密,未经许可不得扩散

第2172页,共3267页

162734118.xls.ms_office1

文档密级:
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user

per cent

70

70

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

None

-

DCH

RNC

None.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

EDCH_TTI RNC _10ms

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2173页,共3267页

162734118.xls.ms_office1

文档密级:

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

V

28.00

28.00

SRB

None

Not involved

Not involved

Not involved

None

V

20.00

20.00

SRB

None

Not involved

Not involved

Not involved

None

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

V

57.00

57.00

SRB

None

Not involved

Not involved

Not involved

None

V

42.00

42.00

SRB

None

Not involved

Not involved

Not involved

None

None

-

None

RNC

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

None

-

None

When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.

The configuratio n data must Less than 5 be AAL2 Path minutes consistent with that of the peer end.

8/7/2013

华为机密,未经许可不得扩散

第2174页,共3267页

162734118.xls.ms_office1

文档密级:

None

False(ADD CELLSETU P,ADD QUICKCE LLSETUP)

Cell(ADD CELLSETU P,ADD QUICKCE None LLSETUP) FALSE(AD FALSE(AD RNC(ADD D D NRNCCEL NRNCCEL NRNCCEL L) L) L)

False(ADD CELLSETU P,ADD QUICKCE LLSETUP)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

NO

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

40

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2175页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

100

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

60

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

200

RNC

None

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2176页,共3267页

162734118.xls.ms_office1

文档密级:

ms

-

3000

RNC

Valid when [PARA]AM RQosPerfor m[/PARA] is set to YES

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

OPEN

OPEN

SRB

None

Not involved

Not involved

Not involved

None

8/7/2013

华为机密,未经许可不得扩散

第2177页,共3267页

162734118.xls.ms_office1

文档密级:

None

0(ADD CELLINTR AFREQHO ) 0 -(SET INTRAFRE QHO)

Cell(ADD CELLINTR AFREQHO ) None RNC(SET INTRAFRE QHO)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2178页,共3267页

162734118.xls.ms_office1

文档密级:

None

0(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 0 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

UNI: 100 NNI: 256

SAAL

None

N (No impact on the UE in idle mode)

Not involved

Not involved

For parameter modificatio n, refer to ITU-T Q.2110.

None

M3UA_AS M3UA_AS RNC P P

None

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2179页,共3267页

162734118.xls.ms_office1

文档密级:

None

Active

Active

RNC

None

Not involved

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

None

-

E1_UNBA E1T1 link

s

-

600

Port

When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa/PEU a and the value of [PARA]LS[ /PARA] is set to ALL,the value of [PARA]WO RKMODE[/ PARA] can be set to E1_UNBA, E1_BA,or T1. When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AOUa/P0U a,the value of [PARA]WO When the value of [PARA]RT[ /PARA] in [MML]SET MSP[/MML ] is set to REVERTIV E, the recovery time should be set.

Not involved

Not involved

Not involved

To convert a link from E1 to T1 or from T1 to E1 on the AOUa/POU a, you should reset the board.

Not involved

Not involved

Not involved

This parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2180页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

3

RNC

This parameter defines an offset relative to the [PARA]NC ountingThd[ /PARA] parameter.

N (No impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

s

-

180

RNC

None

N (no impact on the UE in idle mode)

Not involved

Not involved

The parameter modificatio n has no impact on the equipment.

8/7/2013

华为机密,未经许可不得扩散

第2181页,共3267页

162734118.xls.ms_office1

文档密级:

None

-

None

RNC

None

Y

RNC

Interrupt the service until the parameter is correctly set.

The parameter cannot be modified.

8/7/2013

华为机密,未经许可不得扩散

第2182页,共3267页

162734118.xls.ms_office1

文档密级:

Access

Attribute

Introduced in Version

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2183页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2184页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2185页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2186页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2187页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2188页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2189页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2190页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2191页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2192页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2193页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2194页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2195页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2196页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2197页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2198页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2199页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2200页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2201页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2202页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2203页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2204页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2205页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2206页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2207页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2208页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2209页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2210页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2211页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2212页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2213页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2214页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2215页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2216页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2217页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2218页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2219页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2220页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2221页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2222页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2223页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2224页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2225页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2226页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2227页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2228页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2229页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2230页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2231页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2232页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2233页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2234页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2235页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2236页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2237页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2238页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2239页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2240页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2241页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2242页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2243页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2244页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2245页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2246页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2247页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2248页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2249页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2250页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2251页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2252页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2253页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2254页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2255页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2256页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2257页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2258页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2259页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2260页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2261页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2262页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2263页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2264页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2265页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2266页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2267页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2268页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2269页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2270页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2271页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2272页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2273页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2274页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2275页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2276页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2277页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2278页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2279页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2280页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2281页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2282页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2283页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2284页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2285页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2286页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2287页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2288页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2289页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2290页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2291页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2292页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2293页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2294页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2295页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2296页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2297页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2298页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2299页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2300页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2301页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2302页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2303页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2304页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2305页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2306页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2307页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2308页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2309页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2310页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2311页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2312页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2313页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2314页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2315页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2316页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2317页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2318页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2319页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2320页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2321页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2322页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2323页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2324页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2325页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2326页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2327页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2328页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2329页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2330页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2331页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2332页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2333页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2334页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2335页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2336页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2337页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2338页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2339页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2340页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2341页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2342页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2343页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2344页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2345页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2346页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2347页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2348页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2349页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2350页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2351页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2352页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2353页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2354页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2355页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2356页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2357页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2358页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2359页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2360页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2361页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2362页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2363页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2364页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2365页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2366页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2367页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2368页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2369页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2370页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2371页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2372页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2373页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2374页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2375页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2376页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2377页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2378页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2379页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2380页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2381页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2382页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2383页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2384页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2385页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2386页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2387页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2388页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2389页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2390页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2391页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2392页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2393页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2394页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2395页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2396页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2397页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2398页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2399页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2400页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2401页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2402页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2403页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2404页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2405页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2406页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2407页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2408页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2409页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2410页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2411页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2412页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2413页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2414页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2415页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2416页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2417页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2418页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2419页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2420页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2421页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2422页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2423页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2424页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2425页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2426页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2427页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2428页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2429页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2430页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2431页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2432页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2433页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2434页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2435页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2436页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2437页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2438页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2439页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2440页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2441页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2442页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2443页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2444页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2445页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2446页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2447页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2448页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2449页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2450页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2451页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2452页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2453页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2454页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2455页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2456页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2457页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2458页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2459页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2460页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2461页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2462页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2463页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2464页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2465页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2466页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2467页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2468页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2469页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2470页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2471页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2472页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2473页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2474页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2475页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2476页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2477页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2478页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2479页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2480页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2481页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2482页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2483页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2484页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2485页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2486页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2487页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2488页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2489页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2490页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2491页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2492页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2493页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2494页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2495页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2496页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2497页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2498页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2499页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2500页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2501页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2502页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2503页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2504页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2505页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2506页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2507页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2508页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2509页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2510页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2511页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2512页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2513页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2514页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2515页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2516页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2517页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2518页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2519页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2520页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2521页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2522页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2523页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2524页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2525页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2526页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2527页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2528页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2529页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2530页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2531页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2532页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2533页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2534页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2535页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2536页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2537页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2538页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2539页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2540页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2541页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2542页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2543页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2544页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2545页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2546页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2547页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2548页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2549页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2550页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2551页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2552页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2553页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2554页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2555页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2556页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2557页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2558页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2559页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2560页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2561页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2562页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2563页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2564页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2565页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2566页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2567页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2568页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2569页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2570页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2571页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2572页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2573页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2574页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2575页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2576页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2577页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2578页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2579页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2580页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2581页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2582页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2583页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2584页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2585页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2586页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2587页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2588页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2589页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2590页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2591页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2592页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2593页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2594页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2595页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2596页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2597页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2598页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2599页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2600页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2601页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2602页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2603页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2604页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2605页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2606页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2607页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2608页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2609页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2610页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2611页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2612页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2613页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2614页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2615页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2616页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2617页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2618页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2619页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2620页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2621页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2622页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2623页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2624页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2625页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2626页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2627页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2628页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2629页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2630页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2631页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2632页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2633页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2634页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2635页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2636页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2637页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2638页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2639页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2640页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2641页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2642页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2643页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2644页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2645页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2646页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2647页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2648页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2649页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2650页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2651页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2652页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2653页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2654页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2655页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2656页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2657页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2658页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2659页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2660页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2661页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2662页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2663页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2664页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2665页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2666页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2667页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2668页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2669页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2670页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2671页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2672页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2673页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2674页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2675页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2676页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2677页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2678页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2679页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2680页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2681页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2682页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2683页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2684页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2685页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2686页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2687页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2688页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2689页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2690页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2691页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2692页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2693页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2694页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2695页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2696页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2697页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2698页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2699页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2700页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2701页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2702页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2703页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2704页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2705页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2706页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2707页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2708页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2709页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2710页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2711页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2712页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2713页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2714页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2715页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2716页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2717页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2718页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2719页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2720页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2721页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2722页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2723页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2724页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2725页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2726页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2727页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2728页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2729页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2730页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2731页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2732页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2733页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2734页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2735页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2736页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2737页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2738页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2739页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2740页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2741页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2742页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2743页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2744页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2745页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2746页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2747页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2748页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2749页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2750页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2751页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2752页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2753页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2754页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2755页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2756页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2757页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2758页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2759页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2760页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2761页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2762页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2763页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2764页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2765页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2766页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2767页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2768页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2769页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2770页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2771页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2772页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2773页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2774页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2775页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2776页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2777页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2778页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2779页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2780页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2781页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2782页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2783页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2784页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2785页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2786页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2787页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2788页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2789页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2790页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2791页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2792页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2793页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2794页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2795页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2796页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2797页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2798页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2799页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2800页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2801页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2802页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2803页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2804页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2805页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2806页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2807页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2808页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2809页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2810页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2811页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2812页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2813页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2814页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2815页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2816页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2817页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2818页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2819页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2820页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2821页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2822页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2823页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2824页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2825页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2826页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2827页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2828页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2829页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2830页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2831页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2832页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2833页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2834页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2835页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2836页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2837页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2838页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2839页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2840页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2841页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2842页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2843页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2844页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2845页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2846页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2847页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2848页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2849页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2850页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2851页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2852页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2853页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2854页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2855页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2856页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2857页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2858页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2859页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2860页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2861页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2862页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2863页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2864页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2865页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2866页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2867页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2868页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2869页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2870页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2871页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2872页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2873页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2874页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2875页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2876页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2877页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2878页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2879页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2880页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2881页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2882页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2883页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2884页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2885页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2886页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2887页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2888页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2889页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2890页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2891页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2892页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2893页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2894页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2895页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2896页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2897页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2898页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2899页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2900页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2901页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2902页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2903页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2904页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2905页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2906页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2907页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2908页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2909页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2910页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2911页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2912页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2913页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2914页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2915页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2916页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2917页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2918页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2919页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2920页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2921页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2922页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2923页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2924页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2925页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2926页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2927页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2928页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2929页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2930页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2931页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2932页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2933页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2934页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2935页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2936页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2937页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2938页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2939页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2940页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2941页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2942页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2943页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2944页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2945页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2946页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2947页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2948页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2949页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2950页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2951页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2952页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2953页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2954页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2955页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2956页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2957页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2958页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2959页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2960页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2961页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2962页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2963页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2964页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2965页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2966页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2967页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2968页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2969页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2970页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2971页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2972页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2973页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2974页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2975页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2976页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2977页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2978页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2979页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2980页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2981页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2982页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2983页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2984页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2985页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2986页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2987页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2988页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2989页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2990页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2991页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2992页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2993页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2994页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2995页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2996页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2997页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2998页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第2999页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3000页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3001页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3002页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3003页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3004页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3005页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3006页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3007页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3008页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3009页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3010页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3011页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3012页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3013页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3014页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3015页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3016页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3017页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3018页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3019页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3020页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3021页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3022页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3023页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3024页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3025页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3026页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3027页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3028页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3029页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3030页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3031页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3032页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3033页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3034页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3035页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3036页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3037页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3038页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3039页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3040页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3041页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3042页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3043页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3044页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3045页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3046页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3047页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3048页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3049页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3050页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3051页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3052页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3053页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3054页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3055页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3056页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3057页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3058页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3059页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3060页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3061页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3062页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3063页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3064页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3065页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3066页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3067页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3068页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3069页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3070页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3071页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3072页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3073页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3074页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3075页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3076页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3077页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3078页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3079页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3080页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3081页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3082页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3083页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3084页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3085页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3086页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3087页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3088页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3089页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3090页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3091页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3092页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3093页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3094页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3095页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3096页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3097页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3098页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3099页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3100页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3101页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3102页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3103页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3104页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3105页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3106页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3107页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3108页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3109页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3110页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3111页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3112页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3113页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3114页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3115页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3116页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3117页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3118页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3119页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3120页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3121页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3122页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3123页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3124页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3125页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3126页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3127页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3128页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3129页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3130页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3131页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3132页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3133页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3134页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3135页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3136页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3137页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3138页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3139页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3140页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3141页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3142页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3143页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3144页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3145页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3146页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3147页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3148页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3149页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3150页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3151页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3152页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3153页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3154页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3155页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3156页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3157页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3158页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3159页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3160页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3161页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3162页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3163页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3164页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3165页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3166页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3167页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3168页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3169页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3170页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3171页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3172页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3173页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3174页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3175页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3176页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3177页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3178页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3179页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3180页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3181页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3182页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3183页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3184页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3185页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3186页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3187页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3188页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3189页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3190页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3191页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3192页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3193页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3194页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3195页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3196页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3197页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3198页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3199页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3200页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3201页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3202页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3203页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3204页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3205页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3206页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3207页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3208页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3209页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3210页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3211页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3212页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3213页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3214页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3215页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3216页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3217页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3218页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3219页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3220页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3221页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3222页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3223页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3224页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3225页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3226页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3227页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3228页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3229页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3230页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3231页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3232页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3233页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3234页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3235页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3236页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3237页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3238页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3239页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3240页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3241页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3242页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3243页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3244页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3245页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3246页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3247页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3248页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3249页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3250页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3251页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3252页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3253页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3254页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3255页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3256页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3257页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Transport

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3258页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3259页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3260页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3261页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Equipment

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3262页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3263页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3264页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

Read & Write

Transport

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3265页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Radio

Versions earlier than RAN11.0

Read & Write

Radio

RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3266页,共3267页

162734118.xls.ms_office1

文档密级:

Read & Write

Equipment

Versions earlier than RAN11.0

8/7/2013

华为机密,未经许可不得扩散

第3267页,共3267页

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close