Rubber Insert

Rubber Support Insert
Product Features :

Y
Dimensional accuracy is ensured since each
set is individually machine moulded.
Y
Effective means of preventing crushing of
insulation at pipe support points of chilled
water, condenser water and domestic
hot/cold water installation.
Very high load bearing capacity.
Y
Excellent resistance to deterioration or
Y
distortion.
Rubber being an inert material, RSI are not
Y
corrosive to metal pipes.
Eliminates need for termite control treatment.
Y
Tongue & groove design available.
Y
Y
Various thickness available.
Y
Inherently superior to wood.

T

PIPE
OD

Y
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Y

W

Pipe

Rubber Support Insert

Product Features :

Y
Dimensional accuracy is ensured since each set is individually machine
moulded.
Y
Effective means of preventing crushing of insulation at pipe support
points of chilled water, condenser water and domestic hot/cold water
installation.
Very high load bearing capacity.
Y
Y
Excellent resistance to deterioration or distortion.
Y
Rubber being an inert material, RSI are not corrosive to metal pipes.
Y
Eliminates need for termite control treatment.
Y
Tongue & groove design available.
Y
Various thickness available.
Y
Inherently superior to wood.

Specification :

Y
Material
Y
Density
Y
Temperature Range
Y
Thermal Conductivity

- Compounded Rubber
- 1300 kg/m3
- -20ºC to 110ºC
- 0.16 w/m ºC

Standard Width for RSI :
Y
1/2" to 2"
Y
2 1/2" to 5"
6" & above
Y

-

25mm
38mm
50mm

75mm

48"

EFRSI
ID (inch)

EFRSI
Thick (mm)

48

75