Rug Buddy Operating Instructions
Content
Models:
USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
Plug-in, Portable Heater for under Your Area Rug!
O perating Instructions and Safe ty Advice
Optional KlimaGrip™ Pad Instructions Included
IMPORTANT: Please Read Carefully before Operating
YOU MUST USE A RUG PAD UNDER YOUR RUGBUDDY™!
Pillows, comforters, mattresses, clothing, pet bedding, and other insulating items.
DO NOT leave the following insulating items with zero clearance on top of the RugBuddy™ UNATTENDED!
Do not leave small children or animals that cannot move sleeping on the RugBuddy™!
Speedheat® is Floor Heating www.speedheat.us
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
2. Write down model number and serial number of the RugBuddy™ on packing slip or invoice for future reference. Model #________________ Serial #________________ 3. *IMPORTANT* Unfold the panel completely, stretching it so that there are NO CREASES. TESTING AND TROUBLESHOOTING 1. Testing RugBuddy™ and Outlet Electrical Operation
1. Remove the RugBuddy™ from the box.
Plug unfolded heater in to a 3-prong outlet. Press TOP “Reset” button on GFCI plug. Is there a RED LIGHT on the GFCI plug? o Yes, continue to Step 5. o No, press bottom button then, press “Reset” again. Is there a RED LIGHT on the GFCI plug now? o Yes, continue to Step 5. o No, plug another appliance such as a lamp in to outlet to test if outlet is operating correctly. Does the lamp work in the same outlet? o Yes, call Speedheat® Technical Support at 1-888-WARM FLOOR (888-927-6356) ext. 201. o No, your outlet is not working properly. Check your breakers, call an electrician, or plug in your RugBuddy™ portable floor heater into another working outlet. Repeat Testing and Troubleshooting Steps using a properly functioning outlet.
2. Testing the RugBuddy™ Panel Operation (IMPORTANT!)
Wait 2-3 minutes after plugging in with Red Light illuminated.
Place your hand on the unfolded panel, and you should feel heat coming from the element wire. Do you feel heat generating from the RugBuddy™ heater panel? o Yes, continue installation of your RugBuddy™ panel under your area rug as directed. o No
Turn on RugBuddy™ and lay down on area rug for at least 5 minutes while in operation. Turn off RugBuddy™ and lay on floor again for 5 more minutes while not operating. Is there a noticeable temperature difference on your back? o Yes, continue operating as usual and enjoy! o No, disconnect the heating panel and call Speedheat® Technical Support at 1-888-WARM FLOOR (888-9276356) ext. 201.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 1 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
NON-SLIP AND INSULATION PADDING SPECIFICATION AND INSTALLATION * IMPORTANT! * YOU MUST USE A RUG PAD UNDER YOUR RUGBUDDY™! 1. For best results: •
YOU MUST USE A RUG OR CARPET ON TOP OF YOUR RUGBUDDY™!
If area rug is placed over a hard surface, such as ceramic tile or wood, a non-slip pad should be used for thermal insulation that exceeds 1/8 inch.
If area rug is placed over a soft surface, such as wall-to-wall carpeting, a non-creep cushion or padding should be used and may be less than 1/8 inch. o The cushion or padding should be trimmed to be 1 inch smaller than area rug on all four sides. 2. Place the cushion or pad in the desired position on top of the existing floor covering. •
3. If the floor covering is ceramic tile and installed over a concrete slab, a thermal insulation pad must be used to ensure acceptable heating performance of the RugBuddy™. Speedheat® offers these for your convenience, or you may use any non-slip thermal insulation padding for area rugs that you prefer.
Note: There is no top or bottom and cord comes out of the corner. Cord is 6 feet long and connects to GFCI plug.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 2 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
RugBuddy™ HEATING PANEL INSTALLATION • Place the heating panel over the cushion or pad in the desired position, ensuring that HEATING PANEL IS COMPLETELY FLAT with NO CREASES OR FOLDS. Note: • For best results, cushion pad should be at least 1 inch larger than the heating panel on all four sides. If it is not, DO NOT CUT THE HEATING PANEL. Unless negligible, a different RugBuddy™ size may be required. • There is no top or bottom of the RugBuddy™. You can flip the heating panel whichever way is most convenient for your installation. • The power supply cord is 6’ long, flat, and located in the corner of the heater. This should be kept clear of walkways, so that people do not trip over the cord.
•
SECURE THE PANEL to the pad or cushion with a strong adhesive tape at each corner and in at least one additional place along each edge. TAPE AT: Each corner At least one additional place along each edge. NOTE: • DO NOT plug the supply cord in under the area rug. • DO NOT loop the supply cord under the area rug to take up excess length. • Additional protective layers are necessary for reversible and extremely high value rugs. DO NOT place heating panels under irreplaceable rugs. IMPORTANT! •
Never fold or roll up the RugBuddy™ while in operation! • DO NOT allow heater it to operate unless it is completely flat with no creases or folds!
• Do not forcefully remove heater from pad and rug. If adhered to either, simply turn on RugBuddy™ for approximately 5 minutes. At this time, the heater should be able to be easily removed from both pad and rug.
DO NOT leave the following insulating items with zero clearance on top of the RugBuddy™ UNATTENDED!
Pillows, comforters, mattresses, clothing, pet bedding, and other insulating items.
•
•
Do not leave small children sleeping on the RugBuddy™!
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 3 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
AREA RUG INSTALLATION 1. Place the area rug over the heating panel. Note: • For best results, cushion pad should be at least ½- inch larger than the heating panel on all four sides. If it is not, DO NOT cut the heating panel. •
Unless negligible, a different RugBuddy™ size may be required.
• •
There is no top or bottom of the RugBuddy™. You may flip the heating panel whichever way is most convenient for your installation. Keep the power supply cord clear of walkways to avoid tripping hazards. (note: supply cord is 6’ long and placed in the corner of the RugBuddy™) You CAN use coffee tables, tables, sofas with space underneath them, rolling chairs, and the like with your RugBuddy™. Just no items with zero ground clearance that will act as an insulator.
2. Attach the area rug to the cushion or padding with strong double-sided adhesive tape. Tape at: Each corner At least one additional place along each edge.
IMPORTANT! • NEVER Fold over the RugBuddy™ while in operation or allow it to operate unless it is completely flat with NO CREASES or FOLDS! 3. Plug the GFCI plug in to the 3-prong, grounded outlet. Press TOP “Reset” button. o You should notice a RED LIGHT on GFCI plug. If not, press BOTTOM button then, “Reset” again.
4. Wait about 20 minutes, and lay on top of your area rug for 5 minutes. If instructions are followed properly, you should feel a 10 – 15° F temperature difference to the surrounding, unheated floor.
If not, see TESTING and TROUBLESHOOTING on Page 1 of this manual.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 4 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
OPTIONAL ACCESSORIES CONTROLS
Timers A 120V, grounded timer can be used with the RugBuddy™.
(These can be purchased at your local hardware or home improvement store)
PlugBuddy™ Plug-in Thermostat The PlugBuddy™ plug-in thermostat can be plugged into your wall and programmed to operate your RugBuddy™ without having to worry about turning it on or off. IntuiStat™ (Hard-Wired) If you would like to install a hard-wired thermostat, please visit our website at http://www.speedheat.us to order or for installation instructions.
KlimaGrip™
(optional rug pad by Speedheat® available for purchase in lieu of your own non-slip rug pad)
NOTE: You must tape your RugBuddy™ to a non-slip RUG PAD.
However, it does not have to be the KlimaGrip™ by Speedheat®. Feel free to use any non-slip pad. NEVER operate the RugBuddy™ without it being FLAT with no creases & Secured to a non-slip rug pad.
KLIMAGRIP™ INSTALLATION INSTRUCTIONS (optional add-on)
On Hard Surfaces 1. Remove Plastic On Carpeting 1. Remove Plastic
Protective Cover the Pad Down on the Floor.
Protective Cover of the Pad Down on the Carpet.
2. Place the Dark Side of
2. Place the White Side
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 5 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Warranty Form
RugBuddy™ Warranty This product is manufactured exclusively for Speedheat® by Klimax Mfg. Ltd. The manufacturer, Klimax Manufacturing Ltd, guarantees this RugBuddy™ under area rug electric radiant heating panel against failure from any manufacturing defects as well as normal wear and tear for a period of 5 years from date of installation. If the installation date cannot be determined, the invoice date to the customer or manufacturing date will be considered the installation date. There are no other express or implied warranties. Liability is limited to the repair or replacement of the heating panel only, and does not extend to thermostats or any other accessories. No liability for consequential damages will be accepted. The warranty is subject to the following conditions: 1. That the customer retains proof of payment and returns a fully completed warranty registration form for each heating panel purchased to the address shown on the reverse side of the warranty registration form. 2. That the installation has been carried out in accordance with the installation instructions. Any work carried out by a qualified electrician must be supported by written evidence of such work 3. That the heating panel is used in accordance with the operating instructions and precautions. Invoice Number: RugBuddy™ Warranty Registration Form Invoice Number: I hereby acknowledge that I have read, understood, and complied with the installation instructions and operating precautions accompanying the heating panel bearing the serial number quoted above, and I accept the terms of the warranty as expressed on the page above this registration form. ___________________
First name Middle
Please complete this form and mail or fax to Speedheat®.
_________
Last name
_________________________
_____
______________________________________ _________________ __________ Street Address City State
____________ Zip
_______________________________________ _________________________________ ____________________ Email Signature Date
Speedheat is Floor Heating
www.speedheat.us
RugBuddy™
Portable Heater for under your Area Rug!
Warranty Form
The World Leaders in Safe, Energy Efficient Electric Radiant Floor Heating!
RugBuddy™ Warranty Registration Form
Please place this form in a stamped envelope, and mail or fax to:
Attention: RugBuddy Warranty Registration 120 Arnold Mill Park, Suite 100 Woodstock, GA 30188 Toll-free: 1-888-WARM FLOOR www.speedheat.us
Speedheat is Floor Heating www.speedheat.us
SPEEDHEAT® Floor Heating
Fax: 1-888-927-6357
USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
Plug-in, Portable Heater for under Your Area Rug!
O perating Instructions and Safe ty Advice
Optional KlimaGrip™ Pad Instructions Included
IMPORTANT: Please Read Carefully before Operating
YOU MUST USE A RUG PAD UNDER YOUR RUGBUDDY™!
Pillows, comforters, mattresses, clothing, pet bedding, and other insulating items.
DO NOT leave the following insulating items with zero clearance on top of the RugBuddy™ UNATTENDED!
Do not leave small children or animals that cannot move sleeping on the RugBuddy™!
Speedheat® is Floor Heating www.speedheat.us
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
2. Write down model number and serial number of the RugBuddy™ on packing slip or invoice for future reference. Model #________________ Serial #________________ 3. *IMPORTANT* Unfold the panel completely, stretching it so that there are NO CREASES. TESTING AND TROUBLESHOOTING 1. Testing RugBuddy™ and Outlet Electrical Operation
1. Remove the RugBuddy™ from the box.
Plug unfolded heater in to a 3-prong outlet. Press TOP “Reset” button on GFCI plug. Is there a RED LIGHT on the GFCI plug? o Yes, continue to Step 5. o No, press bottom button then, press “Reset” again. Is there a RED LIGHT on the GFCI plug now? o Yes, continue to Step 5. o No, plug another appliance such as a lamp in to outlet to test if outlet is operating correctly. Does the lamp work in the same outlet? o Yes, call Speedheat® Technical Support at 1-888-WARM FLOOR (888-927-6356) ext. 201. o No, your outlet is not working properly. Check your breakers, call an electrician, or plug in your RugBuddy™ portable floor heater into another working outlet. Repeat Testing and Troubleshooting Steps using a properly functioning outlet.
2. Testing the RugBuddy™ Panel Operation (IMPORTANT!)
Wait 2-3 minutes after plugging in with Red Light illuminated.
Place your hand on the unfolded panel, and you should feel heat coming from the element wire. Do you feel heat generating from the RugBuddy™ heater panel? o Yes, continue installation of your RugBuddy™ panel under your area rug as directed. o No
Turn on RugBuddy™ and lay down on area rug for at least 5 minutes while in operation. Turn off RugBuddy™ and lay on floor again for 5 more minutes while not operating. Is there a noticeable temperature difference on your back? o Yes, continue operating as usual and enjoy! o No, disconnect the heating panel and call Speedheat® Technical Support at 1-888-WARM FLOOR (888-9276356) ext. 201.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 1 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
NON-SLIP AND INSULATION PADDING SPECIFICATION AND INSTALLATION * IMPORTANT! * YOU MUST USE A RUG PAD UNDER YOUR RUGBUDDY™! 1. For best results: •
YOU MUST USE A RUG OR CARPET ON TOP OF YOUR RUGBUDDY™!
If area rug is placed over a hard surface, such as ceramic tile or wood, a non-slip pad should be used for thermal insulation that exceeds 1/8 inch.
If area rug is placed over a soft surface, such as wall-to-wall carpeting, a non-creep cushion or padding should be used and may be less than 1/8 inch. o The cushion or padding should be trimmed to be 1 inch smaller than area rug on all four sides. 2. Place the cushion or pad in the desired position on top of the existing floor covering. •
3. If the floor covering is ceramic tile and installed over a concrete slab, a thermal insulation pad must be used to ensure acceptable heating performance of the RugBuddy™. Speedheat® offers these for your convenience, or you may use any non-slip thermal insulation padding for area rugs that you prefer.
Note: There is no top or bottom and cord comes out of the corner. Cord is 6 feet long and connects to GFCI plug.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 2 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
RugBuddy™ HEATING PANEL INSTALLATION • Place the heating panel over the cushion or pad in the desired position, ensuring that HEATING PANEL IS COMPLETELY FLAT with NO CREASES OR FOLDS. Note: • For best results, cushion pad should be at least 1 inch larger than the heating panel on all four sides. If it is not, DO NOT CUT THE HEATING PANEL. Unless negligible, a different RugBuddy™ size may be required. • There is no top or bottom of the RugBuddy™. You can flip the heating panel whichever way is most convenient for your installation. • The power supply cord is 6’ long, flat, and located in the corner of the heater. This should be kept clear of walkways, so that people do not trip over the cord.
•
SECURE THE PANEL to the pad or cushion with a strong adhesive tape at each corner and in at least one additional place along each edge. TAPE AT: Each corner At least one additional place along each edge. NOTE: • DO NOT plug the supply cord in under the area rug. • DO NOT loop the supply cord under the area rug to take up excess length. • Additional protective layers are necessary for reversible and extremely high value rugs. DO NOT place heating panels under irreplaceable rugs. IMPORTANT! •
Never fold or roll up the RugBuddy™ while in operation! • DO NOT allow heater it to operate unless it is completely flat with no creases or folds!
• Do not forcefully remove heater from pad and rug. If adhered to either, simply turn on RugBuddy™ for approximately 5 minutes. At this time, the heater should be able to be easily removed from both pad and rug.
DO NOT leave the following insulating items with zero clearance on top of the RugBuddy™ UNATTENDED!
Pillows, comforters, mattresses, clothing, pet bedding, and other insulating items.
•
•
Do not leave small children sleeping on the RugBuddy™!
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 3 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
AREA RUG INSTALLATION 1. Place the area rug over the heating panel. Note: • For best results, cushion pad should be at least ½- inch larger than the heating panel on all four sides. If it is not, DO NOT cut the heating panel. •
Unless negligible, a different RugBuddy™ size may be required.
• •
There is no top or bottom of the RugBuddy™. You may flip the heating panel whichever way is most convenient for your installation. Keep the power supply cord clear of walkways to avoid tripping hazards. (note: supply cord is 6’ long and placed in the corner of the RugBuddy™) You CAN use coffee tables, tables, sofas with space underneath them, rolling chairs, and the like with your RugBuddy™. Just no items with zero ground clearance that will act as an insulator.
2. Attach the area rug to the cushion or padding with strong double-sided adhesive tape. Tape at: Each corner At least one additional place along each edge.
IMPORTANT! • NEVER Fold over the RugBuddy™ while in operation or allow it to operate unless it is completely flat with NO CREASES or FOLDS! 3. Plug the GFCI plug in to the 3-prong, grounded outlet. Press TOP “Reset” button. o You should notice a RED LIGHT on GFCI plug. If not, press BOTTOM button then, “Reset” again.
4. Wait about 20 minutes, and lay on top of your area rug for 5 minutes. If instructions are followed properly, you should feel a 10 – 15° F temperature difference to the surrounding, unheated floor.
If not, see TESTING and TROUBLESHOOTING on Page 1 of this manual.
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 4 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Operating Instructions and Safety Advice
Models: USC.1410.11.120 ∙ USC.940.11.120 ∙ USC.470.11.120 ∙ USC.370.11.120 ∙ USC.165w.11.120 ∙ USC.165L.11.120 ∙ USC.065.11.120
OPTIONAL ACCESSORIES CONTROLS
Timers A 120V, grounded timer can be used with the RugBuddy™.
(These can be purchased at your local hardware or home improvement store)
PlugBuddy™ Plug-in Thermostat The PlugBuddy™ plug-in thermostat can be plugged into your wall and programmed to operate your RugBuddy™ without having to worry about turning it on or off. IntuiStat™ (Hard-Wired) If you would like to install a hard-wired thermostat, please visit our website at http://www.speedheat.us to order or for installation instructions.
KlimaGrip™
(optional rug pad by Speedheat® available for purchase in lieu of your own non-slip rug pad)
NOTE: You must tape your RugBuddy™ to a non-slip RUG PAD.
However, it does not have to be the KlimaGrip™ by Speedheat®. Feel free to use any non-slip pad. NEVER operate the RugBuddy™ without it being FLAT with no creases & Secured to a non-slip rug pad.
KLIMAGRIP™ INSTALLATION INSTRUCTIONS (optional add-on)
On Hard Surfaces 1. Remove Plastic On Carpeting 1. Remove Plastic
Protective Cover the Pad Down on the Floor.
Protective Cover of the Pad Down on the Carpet.
2. Place the Dark Side of
2. Place the White Side
Speedheat® is Floor Heating
w w w . sp ee dh e a t. u s Page 5 of 5
RugBuddy™
Portable Heater for under your Area Rug!
Warranty Form
RugBuddy™ Warranty This product is manufactured exclusively for Speedheat® by Klimax Mfg. Ltd. The manufacturer, Klimax Manufacturing Ltd, guarantees this RugBuddy™ under area rug electric radiant heating panel against failure from any manufacturing defects as well as normal wear and tear for a period of 5 years from date of installation. If the installation date cannot be determined, the invoice date to the customer or manufacturing date will be considered the installation date. There are no other express or implied warranties. Liability is limited to the repair or replacement of the heating panel only, and does not extend to thermostats or any other accessories. No liability for consequential damages will be accepted. The warranty is subject to the following conditions: 1. That the customer retains proof of payment and returns a fully completed warranty registration form for each heating panel purchased to the address shown on the reverse side of the warranty registration form. 2. That the installation has been carried out in accordance with the installation instructions. Any work carried out by a qualified electrician must be supported by written evidence of such work 3. That the heating panel is used in accordance with the operating instructions and precautions. Invoice Number: RugBuddy™ Warranty Registration Form Invoice Number: I hereby acknowledge that I have read, understood, and complied with the installation instructions and operating precautions accompanying the heating panel bearing the serial number quoted above, and I accept the terms of the warranty as expressed on the page above this registration form. ___________________
First name Middle
Please complete this form and mail or fax to Speedheat®.
_________
Last name
_________________________
_____
______________________________________ _________________ __________ Street Address City State
____________ Zip
_______________________________________ _________________________________ ____________________ Email Signature Date
Speedheat is Floor Heating
www.speedheat.us
RugBuddy™
Portable Heater for under your Area Rug!
Warranty Form
The World Leaders in Safe, Energy Efficient Electric Radiant Floor Heating!
RugBuddy™ Warranty Registration Form
Please place this form in a stamped envelope, and mail or fax to:
Attention: RugBuddy Warranty Registration 120 Arnold Mill Park, Suite 100 Woodstock, GA 30188 Toll-free: 1-888-WARM FLOOR www.speedheat.us
Speedheat is Floor Heating www.speedheat.us
SPEEDHEAT® Floor Heating
Fax: 1-888-927-6357
