The Definative Guide to Mitel MCD Networking

Published on June 2016 | Categories: Documents | Downloads: 96 | Comments: 0 | Views: 1426
of 4
Download PDF   Embed   Report

Comments

Content

The Definative Guide to Mitel 3300/MCD IP Netw
Mitel 3300 IP Networking Configuration
System IP Configuration Form Host Name: System IP Address: Subnet Mask: Gateway IP Address: Layer 2 (L2) Switch IP Address: E2T Card IP Address: 802.1Q Setting (for QoS go to LAN Policy form) Voice VLAN ID [1-4094]:

Domain Name: Primary DNS Server: Secondary DNS Server: LAN Policy (QoS) - Leave as Standard Voice Media Voice Signalling Other Layer 2 Switch - Leave as Standard Voice VLAN ID: Tag VLAN 1 on Trunk Ports: IGMP Snooping:

Spanning Tree Bridge - Leave as Standard unless both LAN ports are c Rapid Spanning Tree (RSTP): Bridge Priority: Force Version: Hello Time (seconds): Max Age (seconds): Forward Delay (seconds): Tx Hold Count (seconds): IP Routing Router Control ICMP Router Discovery Server: Gateway IP:

IP Network List Network Address 10.0.0.0 172.16.0.0 192.168.0.0 NOTE: Add any further Data Subnets that may be need to be accessed by the M

Mitel Network Switch Port Tagging

Voice VLAN required on Switching On HP ProCurve Switching add 'voice' command to Voice VLAN to turn on LLDP LLDP devices such as Mitel handsets are VLAN aware Non LLDP swithing may require manually setting VLAN ID on handset to boot. QoS and VLAN tagging occours at Mitel device level thru DHCP options. Application Mitel 3300/MCD ICP Mitel IP Handset (No cascaded PC) Mitel IP Handset (Cascaded PC) SIP Device Mitel 5550 IP Console Windows 2003/2008 Application Server (CCM,IQ,YA,UC <2.0, etc) Mitel Std Linux Mitel Application Server (MAS,MBG, LBG and UCA) Vmware Host - Virtual Machine Virtual NIC (Windows) - Virtual Machine Virtual NIC (MSL) Wireless DECT Basestation Trunking Port to 2nd Switch

Routing Requirements
Routing required between the Voice and Data Subnets.

Routing required between Voice Subnets across WAN Routing required between Voice and Data across WAN

el 3300/MCD IP Networking

Same as Network Element name IP in Voice Subnet Subnet Mask of Voice Subnet Gateway of Voice Subnet Secondary IP in Voice Subnet (not CX) No IP if not installed If Installed set Static IP thru DHCP

Always 1 - Do not change. Same as internal LAN Manual host entries required in corp DNS Use Internal DNS Set to external DNS if no secondary availabile (61.88.88.88)

DSCP [0-63] 46 26 0

L2 Priority [0-7] 6 3 0

1 Disabled Enabled

dard unless both LAN ports are connected. Disabled 15 [61440] RSTP 2 20 15 6

Enabled Voice Subnet Default Gateway

Net Mask 255.0.0.0 255.240.0.0 255.255.0.0 may be need to be accessed by the Mitel 3300.

mmand to Voice VLAN to turn on LLDP. VLAN aware setting VLAN ID on handset to boot. vice level thru DHCP options. Recomended Subnet Data VLAN Voice Voice Voice Voice Voice Voice/Data Voice Voice Data (voice if carrying Voice only apps) Voice/Data Voice Voice Untagged Untagged Untagged Forbid Untagged Untagged Untagged Untagged Untagged Untagged Untagged Untagged Voice VLAN Tagged Tagged Tagged Untagged Tagged Tagged Tagged Tagged Tagged Tagged Tagged Tagged

Routing between Voice and Data subnets required when deploying the following VM to email Unified Communicator NuPoint LAN VLAN tagging to be carried across WAN (if possible). QoS maintained. Required when Applications servers such as MAS and UCA are centralised

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close