Two Wheeler and Car

Published on May 2016 | Categories: Types, Books - Non-fiction | Downloads: 33 | Comments: 0 | Views: 381
of 17
Download PDF   Embed   Report

two wheeler and cars

Comments

Content

Karizma ZMR
TECHNICAL SPECIFICATIONS
Engine
            
Type Oil cooled, 4 - stroke single cylinder OHC, fuel injection Displacement 223 cc Max. Power 13.15 kW (17.6 bhp) @ 7000rpm Max. Torque 18.35 N m @ 6000 rpm Max. Speed 128 kmph Acceleration 0-60 kmph in 3.7 sec Bore x Stroke 65.5 x 66.2 mm Carburettor -Compression Ratio 9.0 : 1 Starting Self Start Ignition DC - FTIS (Full Transistorised Ignition System) Oil Capacity -Oil Grade SAE 10 W 30 SJ grade (JASO MA Grade)

Transmission & Frame
  
Clutch Multi-plate wet Gear box 5 Speed constant mesh Frame Type Diamond Frame

Suspension
 
Front Telescopic hydraulic shock absorbers Rear Swing arm with 5 step adjustable IGRS system

Brakes
  
Front Brake Disc, Dia 276 mm Rear Brake Disc Disc Dia 240 mm Rear Brake Drum --

Wheels & Tyres
 
Rim Size Front 18 x 1.85, 5 Spoke cast wheel Rim Size Rear 18 x 2.15, 5 Spoke cast wheel

 

Tyre Size Front 80 / 100 x 18 - 47 P tubeless Tyre Size Rear 100 / 90 x 18 - 56 P tubeless

Electricals
    
Battery 12 V -6 Ah, MF battery Head Lamp 12 V -35 W / 35W - Halogen bulb (Multi – focal reflector) Tail/Stop Lamp 12 V -0.5 W / 4.1W LED lamp Turn Signal Lamp 12 V -21 W (Amber bulb) x 4 nos. (Multi – focal reflector with clear lens) Position Lamp 12 V - 5 W X 2 nos.

Dimensions
         
Length 2110 mm Width 805 mm Height 1175 mm Saddle Height 796 mm Wheelbase 1350 mm Ground Clearance 159 mm Fuel Tank Capacity 15.3 Litre Reserve -Kerb Weight 159 kgs Minimum Turning 2.50 mtrs.

Maintenance Checklist
Critical Points
The life of the bike will be determined by how consistent maintenance is performed.       Wiping down the bike at the end of each class, or at least by the end of each day, will prevent rust and other forms of corrosion to build up. Never use abrasive or oil based cleaning liquids when wiping down the bike. Consider using SpinTech® Polish and other SpinTech® products for your maintenance purposes. Do not wipe down the chain with soap or a towel. Use a cleaning brush to remove any debris buildup, if needed. At the end of each class, students should be encouraged by instructors to release all the tension from the bike to allow perspiration to evaporate. If your facility allows members to interchange pedals, it is critical that the pedals are checked after each class to prevent damage and possible injury. Water bottle cages are easily damaged during class when over-sized bottles are forced to fit within them. Checking and tightening the screws will help prevent damage.

What to Wipe Down
Using an absorbent cloth, focus on all areas where perspiration can settle. Raise all posts to the highest setting to expose this moisture.         Handlebar Flywheel Front leg assembly Back leg assembly Chain guard Brake knob and bolt assembly Pop pins Levelling feet

Inspection
Inspect major moving parts that require constant proper torque and which, if ignored, can cause injury or result in damage to the bike.    Crank arms: Use a foot pound torque wrench 30 to 35 pounds. Pedals: Use a pedal wrench. Verify that the pedal is not cross-threaded. Water bottle: Tighten assembly screws.

Nothing is more important for prolonging the life of your bike and insuring good performance than regular maintenance. High performance bikes are like any other racing vehicle. They are fragile and demand frequent preventive maintenance. Almost all of the costly ($200+) repairs we see at Bikesport are the result of poor or non-existent preventive maintenance. For every two hours the bike is on the road or trail, you should perform a minimum of 15 minutes maintenance.

There are three things you can do to safeguard your bike from serious mechanical problems: 1. Keep your bike clean by washing it. 2. Do not use too much chain lubricant. 3. Keep your tires fully inflated. If you practice these three maintenance operations regularly, you will greatly reduce the amount of serious mechanical problems you have.

Washing Your Bike.
Scott Parr, former team mechanic for Motorola, once said a pro team bike mechanic is really a “glorified bike washer”. Washing bicycles is so important to their maintenance it is the first task pro team mechanics perform at the end of each racing day. In big events like the Tour de France, all the team bikes are washed completely every day. Bike washing dislodges abrasive residue that can be pulled through a bicycle drive train and into cables. This residue is what causes the parts to wear quickly. Basically, you wash a bike like you wash a car. Modern bicycles have sealed or semi-sealed bearing surfaces that can resist some water intrusion. They are not waterproof. Do not use power washers or direct a high pressure stream of water into any bearing surface such as hubs, bottom bracket, headset, or cassette. A work stand is useful when washing a bike as it enables you to remove the wheels before washing. This lets you get into the rear triangle of the bike more easily and do a better job of getting the bike clean. If you don’t have a workstand you can simply lean it against a wall. To wash a bike you need the following equipment:

      

Bucket Sponge Towel(s) Stiff bristle brush Hose Chain lube Simple Green (or other water soluble, bio-degradeable)

Start by rinsing the bike off with a garden hose. This will dislodge the loose foreign matter attached to the bike. Some people are concerned water may damage bearings or cause corrosion. While a valid concern, most modern bikes have adequate seals to prevent water intrusion. Even with extremely dirty mountain bikes, it is best to avoid the high-pressure power washer and stick to a garden hose. Once the rinse is complete apply the Simple Green or other biodegradable degreaser to the drivetrain. Be sure you get the back of the chainrings and the cogs as well as the chain. It is a good idea to degrease the rear wheel and the rear brake also as these pick up lubricant residue from the drivetrain. After you apply the degreaser it is a good idea to let it soak for a few minutes to dissolve lubricant residue. Following the degreaser, use your stiff bristle brush to scrub the chainrings and cogs. Scrub both sides of the chain as it passes over the chainring while back-pedaling. If you are using a work stand and have removed the wheels you can simply place a quick release skewer in the rear dropouts to hold the chain. We use an old hub (most bike shops have used ones they can give you) with a cogset on it for a "dummy hub" to hold your chain in place while you wash. Scrub the drivetrain thoroughly and pay attention to the back of the chainrings. If you have used wax based lubricants like White Lightening you may have a difficult time getting the entire residue off.

After scrubbing the degreaser off the drivetrain soap the entire bike with a big sponge and a lot of warm suds. Wash the handlebar and stem area, getting behind the brake levers and under the stem. Wash under the saddle and wash both rims and tires. Soap the drivetrain to wash off the degreaser residue. Following the wash, rinse the bike completely. If you left your wheels on during the whole process, pedal the bike in the workstand or pick up the rear wheel and pedal to sling the excess water off the bike. Quickly towel the bike and take it for a ride for about 2-3 blocks to blow the water off. Centrifugal force will shoot most of the water off the rotating parts. After your short ride put the bike back in the stand and towel it off thoroughly. About every 3-4 washes you should mark your saddle height on the seat post, remove your seatpost and dry the inside of the seat tube and the outside of the seatpost. If your bike needs grease between the seatpost and seat tube (not all bikes do, it may cause problems with carbon seat posts or carbon frames and may not be recommended with titanium bikes- see your owner's manual), put a thin layer of fresh grease there and replace the seatpost to the original height. Following the complete drying, relube your chain from the bottom, on the inside of the chain's rotation so centrifugal force drives the lube into the chin links, not off onto your bike. Wipe all the excess chain off by back-pedaling the drivetrain through a rag several times. If you have a painted bike I recommend waxing it. During the waxing be sure to inspect the frame for cracks as well as bar and stem. Check to be sure your bottle cages are tight and not cracked. This might also be a good time for new handlebar tape. Once this operation is complete and you have checked your wheel quick releases and aired your tires the bike as close to new as you can get it by washing and is ready to ride again. A key component of washing the bike is inspecting it completely for minor problems that could become major. Washing your bike not only makes all components last longer, but forces you to look it over in great detail. Keeping the bike clean is the most important step in maintenance and the most frequently overlooked one. Take care of your bike and it will take care of you.

Ex-ShowroomOn iNR 100300I RoadKARIZMA ZMRI iNR 111171
Fast Facts about Hero Karizma ZMR (New Version)
          Gets Body coloured rear view mirrors Features Blue back-lit instrument cluster Features New ZMR logo on the instrument cluster Gets Re-designed silencer and heat shield Gets new "Vibrant Orange" shade Features body coloured split grab rail Powered by a 223cc fuel injected engine Maximum power is 17.6 Bhp at 7000 rpm Maximum torque is 18.35 Nm at 6000 rpm Now available in four shades, blue and yellow has been discontinued

Hero Karizma ZMR Exterior
The looks of new Karizma ZMR are quite subjective. The bike is unable to convince you instantly. The Y-shaped headlight is not as smoky as Honda CBR150R and the whole front appearance including its tinted visor, body coloured rear view mirrors and edgy mudguard looks way less sporty and attractive than R15. The engine covering features ZMR written on it and looks nice but doesn't look aerodynamic. Clear lens indicators are integrated in this fairing. Dark golden colour is finished on its disc plates, silencer and telescopic forks at its front. Side panels are very similar to the regular Karizma. It has single seat with split, body coloured grab rails. The tail section of the bike is a complete let down. The integrated LED tail light resembles to its cheaper sibling CBZ and with its slim rear tyre, things get worse. The rear mudguard is not stylish either. Looking at the tough competition, we expected something much better than this from Hero and they could have worked more on its styling.

Main Styling Features of Hero Karizma ZMR
Main styling features of Karizma ZMR are Full Front Fairing, Split Clip On Handle Bars, Body Coloured Split Rear Grab Rails, Mirrors Mounted On The Fairing, New Rear Mud Guard, New Headlamp & Tail Lamp, Which Is Now LED, Rear Disc Brakes, Turn Indicators Mounted On Front Fairing, New Stylish Graphics, Slightly Reprofiled Body Work, Body coloured rear view mirrors, New design for silencer and heat shield, Blue back-lit instrument cluster and ZMR logo on the instrument cluster.

Instrument Console of Hero Karizma ZMR
Hero Karizma ZMR features a fully digital instrument console with LED indicators. The overall designing and appearance of instrument console is quite soothing. It sports a round pod for its digital tachometer with digital fuel gauge just above it. It also has digital speedometer, odometer and trip meter with other digital information .This instrument console comes with blue illumination and certainly looks best in its segment.

Engine and Gearbox
Hero has added fuel injection to the same 223cc air-cooled engine of regular Karizma. This 4-stroke single cylinder engine now generates a maximum power output of 17.6 bhp at 7000 rpm with a modest torque production of 18.35 Nm accessible at 6000 rpm. This engine is served with a five speed manual gearbox with one gear down and four up-shift pattern.

Acceleration and Performance
Undoubtedly, it’s a very refined engine which never complains even if pushed hard. This engine generates a good amount of torque and that’s also available very early which helps this bike to move effortlessl y. Gear ratios are also very short and that’s why you never run short of power but once you take this bike on long runs then you will come across its disabilities. The mid-range is very effective but after 6000rpm there is nothing much left in this bike and from here on, it’s nowhere near to its other competitors which easily go all the way to 10000rpm. The heavy amount of torque enables this bike to complete 0-60km/hour in 3.7 seconds, which is quite respectable but its heavy weight and lack of sixth gear restricts this bike to a top speed of 126km/hour which is not possible with a pillion rider. The high end performance is disappointing. However gear transitions are very smooth and gear ratios also feel well matched. Once you are in bigger gears than you can notice the slow response of its throttle in comparison to others. If you talk about refinement then this engine is fine but if it’s about power and performance then ZMR loses to its rivals.

Hero Karizma ZMR Mileage
The fuel efficiency of ZMR is less than the regular Karizma due to its additional weight. You can expect anything around 30-35km/ltr in city conditions and on long runs it can give you a mileage of around 35-40km/ltr.

Comfort while Driving Hero Karizma ZMR
Hero Karizma ZMR features a wide and comfortable seat which is very helpful on long journeys. The clips on handle bar are quite big in size and are easily reachable as you don’t have to bend forward. One can easily hold them with a perfect grip. Unlike its competitors, foot pegs are placed much before which takes away the sporty feeling but feels much convenient.

Safety Features and Storage Space
The bike has under seat storage space and comes with standard safety features.

Suspension and Brakes
Hero has equipped this bike with telescopic forks at its front with 5-step adjustable shockers at its back. This suspension system is quite adequate and easily carries the heavy weight of this bike. Its perfect braking system keeps this hefty machine under control. It sports a disc brake of 276mm at its front with a rear disc brake of 240mm.

Ride and Handling
The bike is certainly not good in this department. The heavy weight of this bike is quite evident in its handling. It’s not an easy bike to drive in city traffic. Even on highways, the bike lacks stability and fails to remain grounded. Things get worse around corners as its skinny tyres are unable to hold the road properly and it may scare you at sharp corners. It’s only its wheelbase of 1350mm which keeps it alive on roads and confirms you a satisfactory ride. Bumps and potholes are not a major issue but its low ground clearance of 159mm is a matter of concern. You may find it hard to cross many obstructions on our Indian roads. Wider tyres and high ground clearance would have made things better.

Shades Available in Hero Karizma ZMR
Karizma ZMR is available in four shades: Spot Light White, Panther Black Metallic, Candy Blazing Red and Vibrant Orange (New Shade). The company has discontinued Yellow and Blue shade which were available in 2010 model.

Verdict
Hero Karizma ZMR is priced at INR 98.5K (ex-showroom, Delhi, may vary). At this price, ZMR becomes the cheapest bike in India to sport a full fairing. Despite being the cheapest in its segment, we still feel it’s overpriced. Only a fairing is not enough for this bike to beat its competitors. Bikes of this segment are known for their incredible performance, speed, enjoyable ride and handling and unfortunately ZMR lacks all these characteristics. It’s certainly not a complete value for money bike but can be considered for its acceptable looks, performance and features. If you find R15 and CBR150R out of your budget then you can opt for this bike.

Power and style never looked this raw The road will tremble and the traffic will give way. Fitted with the ruthless power of a 998cc engine, FZ1 dominates the roads with blazing-fast speed and bullish attitude.

Engine type Displacement Bore & Stroke Compression ratio Maximum output Maximum torque Starting system Lubrication Cylinder layout Clutch type Ignition type Fuel supply Primary/Secondary reduction ratios Tranmission type Caster/Trail Gear ratios

Liquid Cooled, 4-stroke, DOHC, 5-valve 998cc 77.0 x 53.6 mm 11.5 : 1 150 PS/11,000 rpm 106 Nm/ 8,000 rpm Electric Wet sump In-line, 4-cylinder Wet, multiple-disc T.C.I. Fuel Injection 65/43 (1.512) / 45/17 (2.647) Constant mesh, 6-speed 25 degree/109 mm 1st = 2.533, 2nd = 2.063, 3rd = 1.762, 4th = 1.522, 5th = 1.350, 6th = 1.208

Frame type Suspension (Front/Rear)

Diamond Telescopic fork / Swingarm

Brake Type (Front/Rear)

Dual Hydraulic disc brake Ø 320 mm / Single hydraulic disc brake Ø 245 mm 120/70 ZR17M/C (58W) /190/50 ZR17M/C (73W) 130 mm / 130 mm

Tyre size (Front/Rear) Wheel Travel (Front/Rear)

Overall length x width x height Kerb Weight Seat Height Wheelbase Minimum ground clearance Engine oil volume Fuel tank volume

2,140 mm × 770 mm × 1,060 mm 214kg 815 mm 1,460 mm 135 mm 3.8 liters 18 litres

Yamaha has added a limited edition series of its FZ-S and Fazer models, which would be available in a new shade of battle green along with re-worked graphics

With the festival season around the corner Yamaha has launched a special edition series of its most successful offering for our market, the FZ-S and Fazer. The Japanese two-wheeler manufacturer has given the bikes a cool cosmetic makeover by offering them in a new shade of battle green color which is a mattish shade of green. Along with the new colour the limited edition bike would also feature all new graphics to add to the bikes overall exterior appeal. Speaking on the occasion, Roy Kurian, Vice President – Sales and Marketing, Yamaha Motor India Sales Pvt. Ltd. said, “Our strategic intent is to provide customers with stylish new variants of the FZ series to match his personal style. These bikes have been instrumental in catapulting our sales to an all new level. We have kept the essence of FZ series bikes intact while altering the aesthetics to exemplify the masculine feeling these tough machines are known for. We are confident that these variants too will be an instant hit among the biking enthusiasts.”

The changes on the limited edition are only cosmetic and no changes have been made on the mechanicals. The bikes are powered by the same 153cc, air cooled, 4-stroke mill producing 14.2PS @ 7,500 rpm and maximum torque of 13.6 Nm at 6000 rpm and are mated to a 5-speed transmission. This isn’t the first time that Yamaha has launched a special edition of the FZ-S and Fazer and this seems an attempt to boost its sales figure with the 'limited edition' moniker, adding that little bit of exclusivity to a tried and tested product from time to time. The limited edition FZ-S has been priced at Rs. 74,385

Preventive maintenance car
Airfilter Check it every month. Replace it when it becomes dirty or as part of a tune -up. It is easy to reach, right under the big metal 'lid', in a carbureted engine; or in a rectangular box at the forward end of the air in a duct hose assembly.

Battery

Extreme caution should be taken while handling a battery since it can produce explosive gases. It is advisable not to smoke, create a spark or light a match near a battery. Always wear protective glasses and gloves. Inspect belts and hoses smoothly. Replace glazed, worn or frayed belts. Replace bulging, rotten or brittle hoses and tighten clamps. If a hose looks bad, or feels too soft or too hard, it should be replaced. Check the brake fluid monthly. First wipe dirt from the brake master cylinder reservoir lid. Pry off the retainer clip and remove the lid or unscrew the plastic lid, depending on which type your vehicle has. If you need fluid, add the improved type and check for possible leaks throughout the system. Do not overfill. Check the oil after every fill up. Remove the dipstick, wipe it clean. Insert it fully and remove it again. If it is low, add oil. To maintain peak performance, the oil should be changed every 3,000 miles or 3 months, whichever comes first. Replace the oil filter with every oil change. Look underneath for loose or broken exhaust clamps and supports. Check for holes in muffler or pipes. Replace the rusted or damaged parts. Have the emission checked at once per year for compliance with local laws. Inspect the hoses and belts monthly. If a hose looks bad, or feels too soft or too hard, it should be replaced. Make sure that all your lights are clean and working, including the brake lights, turn signals and emergency flashers. Keep spare bulbs and fuses in your vehicle. To maintain peak performance, change oil every 3 months or 3,000 kms whichever comes first. Replace oil filter with every oil change.

Belts

Brake Fluid

Engine Oil

Exhaust

Hoses Lights Oil Filter

Power Check the power steering fluid level once per month. Check it by removing the Steering Fluid reservoir dipstick. If the level is down, add fluid and inspect the pump and hoses for leaks. Shock Absorbers Tyres Look for signs of oil seepage on shock absorbers, test shock action by bouncing the car up and down. The car should stop bouncing when you step back. Worn or leaking shocks should be replaced. Always replace shock absorbers in pairs. Keep tyres inflated to recommended pressure. Check for cuts, bulges and excessive tread wear. Uneven wear indicates tyres are misaligned or out of balance. Check transmission fluid monthly with engine warm and running, and the parking brake on. Shift to drive, then to park. Remove dipstick, wipe dry, insert it and remove it again. Add the approved type fluid, if needed. Never overfill.

Transmission Fluid

Washer Fluid Wiper Blades

Keep the windshield washer fluid reservoir full. Use some of it to clean off the wiper blades. Inspect the windscreen wiper blades whenever you clean your windshield. Do not wait until the rubber is worn or brittle to replace them. They should be replaced at least once per year, and more often if smearing occurs.

Tata Nano
Commonly called as “The People's Car”, the Tata Nano had been finally launched in Mumbai on March 23, 2009; after crossing all the hurdles that were in its way.

Tata Nano The launch of this family car was like a dream come true for Mr. Ratan Tata (Chairman of Tata Group) and all those car lovers across the country who were really longing to have their own car. Tata Nano is sleek and classy in look. Besides of its 624 cc, 2 cylinder, MPFI high performance engine and tubeless tyres, this magical car is comprised of many other fabulous features. Above all, Nano is the cheapest car of the world. As Mr. Tata had also said, addressing the press at the launch of Nano, “We have made a promise and we have kept that promise”, reminding people of his promise to made the cheapest car. Nano will be soon available in the market in multiple colors including racing red, summer blue, champagne gold, lunar silver, ivory white & sunshine yellow. Booking will start from April 9 and will extend till April 25. The people's car will be out for sale from July 2009. The price of the cheapest car will range from Rs. 1,23,000 to Rs. 1,80,000; inclusive of all taxes. However, the given price range may vary for different states, according to the company policy.

Tata Nano Variants
At present, Tata Nano is available in following models or variants. The same are as under:

      

Tata Nano (standard) Tata Nano CX Tata Nano LX

Tata Nano EV (Awaited) Tata Nano Europa (Awaited) Tata Nano Hybrid (Awaited) Tata Nano Plus (Awaited)
The features of the above given variants are divided into four main categories viz.

  

Comfort & Convenience Interior Exterior



Safety & Security The same features are more precisely explained below, according to the model.

Features of Tata Nano (Standard) Comfort & Convenience Interior Seat Upholstery: IRVM: Plain Single Tone Vinyl Door Trim: Gear Shift Console: Basic Single Tone Vinyl Map pocket Integral with Driver & Codriver Seat: Fabric pocket Front Seat Headrests: Integrated Sunvisor on Driver & Passenger side Driver Seat with Slider Roof Lining: Jute Based Instrument Cluster Illumination Fuel Gauge: Digital Front Room Lamp Steering Wheel: 2 Spoke Exterior Colors: Ivory White, Racing Red, Summer Blue ORVM (Driver Side): Black Wheel Covers: Style-in-Steel Wheels Clear lens Headlamp & Tail lamp Aerokit: Airdam Front Wiper & Washer: 2 speed Front Windshield: Plain Additional body reinforcements Intrusion beam: Integral feature through innovative door system design Radial Tubeless tyres Front & Rear Seat Belts Door Lock on Driver Side Center High Mount Stop Lamp Safety & Security

Laminated Windshield

Front assist grips Rear assist grips Head lamp levelling: Integral feature through innovative suspension design Low Fuel Warning Lamp Rear Seat Folding

Nano LX Technical Specs
Dimensions & Weight Length Width Height Wheelbase 3099 mm 1495 mm 1652 mm 2230 mm

Ground Clearance Kerb Weight Capacity Seating Capacity Doors No of Seating Rows Bootspace Fuel Tank Capacity Engine & Transmission Engine Type Displacement Fuel Type Max Power Max Torque Mileage (ARAI) Alternate Fuel Valve/Cylinder (Configuration) Cylinders Fuel System Transmission Type No of gears Dual Clutch Sport Mode Drivetrain

180 mm 635 kg

4 Person 4 Doors 2 Rows 80 litres 15 litres

624 cc, 2 cylinder, MPFI 624 cc Petrol 38 bhp @ 5500 RPM 51 Nm @ 4000 RPM 25.4 kmpl Not Applicable 2, SOHC 2, In V Shape MPFI Manual 4 Gears 0 0 RWD

Suspensions, Brakes, Steering & Tyres Independent, Lower Wishbone, McPherson Strut with gas filled dampers and anti-roll bar Independent, Semi Trailing arm with coil spring & gas filled shock absorbers Drum Drum 4 metres 135 / 70 R12 155 / 65 R12

Suspension Front

Suspension Rear

Front Brake Type Rear Brake Type Minimum Turning Radius Front Tyres Rear Tyres

Hyundai New i20 Sportz 1.4D Technical Specifications
Engine and Transmission

EngineDisplacement (CC) 1396 No Of Cylinders 4 No Of Gears 6 Speed Power (PS) 90 PS Torque (NM) 136 Nm Transmission Manual Kerb Weight 1148 / 1212 Fuel Type Diesel Drive Type FWD
Fuel Economy

14
Exterior Dimensions

Length Width Height 3995*1710*1505 Wheelbase(mm) 2525 mm Ground Clearance (mm) 165 mm Track Front (mm) 1505 mm Track Rear (mm) 1503 mm
Interior Dimensions

Boot (Litres) Data Not Available Fuel Capacity (Litres) 45 Litres Seating Capacity 5

City (KPL) Data Not Available Highway (KPL) Data Not Available Overall (KPL) 21.9
Performance

060 kph (sec) Data Not Available 0100 kph (sec) Data Not Available Top Speed (KPH) Data Not Available
Brakes Steering Suspension and Tyres

Brakes Front Disc Brake Brakes Rear Drum Brake Steering Type Rack and Pinion Minimum Turning Radius 5.2 Mtr Suspension Front Mc Pherson Strut with Gas shock absorber Suspension Rear Couple Torsion Beam Axle with Gas shock absorber Tyre Size 185/65 R14 Wheel Size

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close