Wireless Site Survey Report

Published on July 2016 | Categories: Documents | Downloads: 38 | Comments: 0 | Views: 610
of 18
Download PDF   Embed   Report

IT management requested an RF (Radio Frequency) site survey at multiple campuses throughout the world for an upcoming wireless proof-of-concept (POC) project. The main trigger points for the infrastructure overhaul revolve around new applications that will be deployed (i.e. Jabber/Lync), giving employees the ability to communicate with other people in the organization using voice/video services.

Comments

Content




response to
“Company”
for the
Wireless Site Survey of
Building B/C



Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

2
© Copyright, MSA Systems, 2013. All rights reserved.

Confidentiality
All information contained in this document is strictly confidential and is provided for the sole purpose of providing the services described
herein and shall not be used for any other purpose.
Many of the products, services, and company names referred to in this document are registered trademarks. They are all hereby
acknowledged.

Obligations and conditions
In the event that any assumption on which MSA has based its proposal or any information provided by Plastic Express changes or is
incorrect, MSA reserves the right to revise any portion of this document accordingly.
Implementation of any services detailed in this document is subject to applicable regulations in force on the date the services are to be
implemented.





Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

3
1 Project Overview
“Company” is a new type of storage company designed for a new world in which ever-increasing amounts of content are
being generated from cloud services, Internet content providers, social networks and mobile devices. They focus on
delivering innovative customized storage solutions and high level storage infrastructure consultation to some of the
world’s largest and most sophisticated technology companies.

IT management requested an RF (Radio Frequency) site survey at multiple campuses throughout the world for an
upcoming wireless proof-of-concept (POC) project. The main trigger points for the infrastructure overhaul revolve around
new applications that will be deployed (i.e. Jabber/Lync), giving employees the ability to communicate with other people in
the organization using voice/video services.
This report will consist of buildings B/C. Building B/C consist of 1 floor some areas in this campus belongs to another
company and does not require RF coverage in all areas. This report will have documents inserted that are jpeg and other
formats, the original working documents will be included in the “Company” designated “box” folder. This will allow more
flexibility in moving the document(s) from one location to another.
This site was one of two of the first campus to be surveyed in this region and all of the other locations had representatives
at this site for training, briefing, updates and overview of the survey process.
Air Magnet Surveyor Pro and Aruba AP 225 was used for the site survey(s).

The project requirements were pre-established via conference calls with management, prior to the site survey and are as
follows:

1. Provide 100% coverage for all buildings identified to be surveyed at the multiple campuses on the 2.4 GHz
(B/G/N) and 5 GHz (A/N) bands.
2. Ensure that lower-powered RF devices such as Windows Mobile, Android or IOS-based devices are still able to
receive adequate RSSI for VoIP and video calls.
3. Conference rooms that have more than 4 chairs should have a dedicated AP. If there are multiple conference
rooms next to each other, and/or very large meeting rooms, calculate potential user density first before adding an
additional AP.
4. AP capacity planning was targeted at approximately 30 devices per AP. Management advised that up to 3
devices per user should be expected.





Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

4
2 Facility Information
Planned RF Usage:
Types of devices that are planned to be on the network
o Smart Phones
o VoIP phones
o Laptops
o Monitoring Devices for maintenance use

Site Description
The campus for the site survey consisted of the following buildings and floors.
o Building B/C – 1 floor – Not all of the floor required RF coverage.
o Building D/E – 3 floors – not all of the 3
rd
floor required RF coverage
o Building F – 2 floors – not all of the floor for each level required RF coverage
o Building G - 4 floors
o Building K - 3 floors – On 3
rd
floor there is one classroom for RF coverage – Café is also located in
this building
The facility is described as follows:
o Indoor area with offices, and clean rooms
o Building B/C consist of 1 floor with offices, and clean room,
o All access points (APs) will require a mounting bracket for installation.
o There were multiple locations the surveyor was able to get into for the purpose of the site survey and is
annotated on the AP spreadsheet;
o The ceiling heights are generally between 8-12 feet in most areas.
o The physical conditions of some of the buildings were different from the drawings provided and created
some delays in the process.

Environmental Conditions
This section documents general environmental properties or conditions at the time of survey:
o No abnormal hot/cold areas were either observed or reported.

















Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

5

Current RF Usage
This section documents any RF equipment either disclosed by the client or located by through RF sniffing tools:
o Numerous rogue AP’s detected by Air Magnet in many of the surveyed areas.
o Lab areas contain numerous types of high-powered electronic testing equipment and may cause some
RF interference, especially in the 2.4 Ghz band and as part of the fine tuning process during the
installation, may need to turn off some of the 2.4 GHz radios.
o There were areas that were not available to the surveyor (conferences on going, doors locked, meetings,
etc.).
o AP locations and any special mounting instructions are annotated on the AP spreadsheet
o All the ceilings in this campus are hard ceilings and will require additional mounting bracket for
installation.



Special Requirements
Helpful instructions or advisories for the installer:
o A scissor lift may be required for the installation.
o Customer will be providing AP power via a PoE-capable switch.
o Switch capacity planning and AP switch termination is to be determined by IT department.
o This report does not include the Individual Distribution Frame (IDF) closet or switch which the AP will be
terminated or connected to.
o A floor plan with the Access Point (AP) locations have been provided with Microsoft Visio as well as AP
location information on Microsoft Excel spreadsheet(s).






Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

6
3 RF Propagation Testing
Site Survey Approach

Signal propagation is determined by temporarily mounting an access point in the ceiling and measuring the coverage
area that the access point was able to provide.

o An Aruba AP model AP225 was used for RF testing.
o The access point receives inline power using a standard Ethernet cable. By using inline power, a
separate power cord is not required to connect to the access point. The Ethernet cable is plugged into the
Ethernet port on the back of the access point and the opposite end is connected to the inline power
source (PoE injector).
o The Air Magnet software takes automatic samples of the RF environment and plots them on the map as
indicated by the user. Certain areas of the facility were not accessible due to either clean room
restrictions, in conference, meetings, training at time of survey, or security related mandates. However,
more than enough samples were obtained to demonstrate recommended RF propagation based on the
project requirements.

The AP cells have been separated out at an RSSI value of -62 to ensure that smart phone devices and other low-
powered devices are able to use the system issue free. This coverage zone is established by measuring the shortest
distance the desired value is sampled from; usually referenced by the amount of interfering objects in between.

The average distance that this value was determined at for this location based on the survey points was between 70-
85 feet. However, AP density is also related to the amount of users for any given area. Since wireless transmissions
are half-duplex, throughput is relative to how many client transmissions are occurring with the AP.

Because the requirements for this project included 100% coverage in the 802.11A/N band, the survey was focused
specifically in this area, since the power output is FCC limited at half of its 802.11 B/G/N counterpart.










Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

7
4 AP Recommendations
The AP cells have been separated at an RSSI value of -62 to ensure that smart phone devices and other low-powered
devices are able to use the system without issues. These devices often use power saving algorithms which can cause
the Tx power to be significantly lower to preserve the device battery life.

Coverage zones are established by measuring the shortest distance where the established RSSI value is sampled usually
based on the amount of interfering objects in between the AP and the client. The average distance that this value was
determined for most locations was between 70-90 feet. The average distance that this value was noticed was between
70-85 feet from the AP.

However, AP placement is also related to the amount of users for any given area. Since wireless transmissions are half-
duplex, throughput is congruent to how many client transmissions are occurring with the AP at any given time. In the
cubicle offices, typically more AP’s are added, and special attention is made to trim Tx power to prevent excessive
channel overlap.
The following is list of number and model access point for each building and floor. For this campus:
 Building BC
o Floor: 1 7 each Aruba AP 225
 Building DE
o Floor 1 19 each Aruba AP 225
o Floor 2 18 each Aruba AP 225
o Floor 3 10 each Aruba AP 225
 Building F
o Floor 1 3 each Aruba AP 225
o Floor 2 2 each Aruba AP 225
 Building G
o Floor 1 9 each Aruba AP 225
o Floor 2 7 each Aruba AP 225
o Floor 3 8 each Aruba AP 225
o Floor 4 11 each Aruba AP 225
 Building K
o Floor 1 3 each Aruba AP 225
o Floor 2 5 each Aruba AP 225
o Floor 3 1 each Aruba AP 225



Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

8



Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

9
AP Layout – Visio Drawings
Building B/C – 1
st
Floor – 7 APs


Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

10
O
D
A
-
B
C
-
1
-
R
M
-
P
R
O
C
U
R
E
M
T
G
1
O
D
A
-
B
C
-
1
-
R
M
-
P
R
O
C
U
R
E
O
D
A
-
B
C
-
1
-
R
M
-
C
L
E
A
N
-
1
O
D
A
-
B
C
-
1
-
R
M
-
C
L
E
A
N
O
F
F
I
C
E
O
D
A
-
B
C
-
1
-
R
M
-
C
L
E
A
N
-
2
O
D
A
-
B
C
-
1
-
R
M
-
C
L
E
A
N
-
3
O
D
A
-
B
C
-
1
-
R
M
-
C
L
E
A
N
-
4



Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

11
5 AP Location Table
Building B / C – floor 1














AP# AP NAME
Ant
Type
AP
MODEL
AP /
ANT
HT
NOTE
S
AP LOCATION / Mounting
Information
Additional
Mounting Bracket
Type
AP001 BC-1-RM-CLEAN-1 Internal AP225 10ft
Clean
Room
Building B 1st floor clean room as
shown on map. Ceiling mount. AP-220-MNT-W2
AP002 BC-1-RM-CLEAN-2 Internal AP225 10ft
Clean
Room
Building B 1st floor clean room as
shown on map. Ceiling mount. AP-220-MNT-W2
AP003 BC-1-RM-CLEAN-3 Internal AP225 10ft
Clean
Room
Building B 1st floor clean room as
shown on map. Ceiling mount. AP-220-MNT-W2
AP004 BC-1-RM-CLEAN-4 Internal AP225 10ft
Office
space
Building B 1st floor clean room as
shown on map. Ceiling mount. AP-220-MNT-W2
AP005 BC-1-RM-CLEANOFFICE Internal AP225 10ft
Clean
Room
Building B 1st floor clean room
office as shown on map. Ceiling
mount. AP-220-MNT-W2
AP006
BC-1-RM-
PROCUREMTG1 Internal AP225 10ft
Office
space
Building B 1st floor procurement
office meeting room 1 as shown
on drawing. Ceiling mount. AP-220-MNT-W2
AP007 BC-1-RM-PROCURE Internal AP225 10ft
Office
Space
Building B 1st floor procurement
office as shown on drawing.
Ceiling mount. AP-220-MNT-W2


Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

12



Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

13
6 RF Survey Heat Maps via Floor
Building B / C – 1
st
Floor Survey Points -


















Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

14



Building B/C – 1
st
Floor 2.4 GHz Heat Map

















Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

15



Building B / C – 1
st
Floor – 5.2 GHz Heat Map

















Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

16





Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

17
7 Bill of Materials
Part Number Description Qty
Wireless LAN Access
Points

Products
AP225
Aruba AP-225 Dual-radio 802.11n/ac 3x3 AP, integrated
antennas
7
AP-220-MNT-W2
Aruba AP-220 series wall mounting kit
7




Wireless Site Survey





This document contains proprietary information of MSA and is provided upon the condition
that the information contained herein will be held in confidence and will not be duplicated
or disseminated to others, in whole or in part, without the written permission of MSA.

18
8 MSA Services
About MSA Systems, Inc.

MSA Systems, Inc. was founded in 1996 and is headquartered in San Jose, CA with offices in Anaheim CA, Portland OR,
Phoenix AZ, and Denver CO. MSA is interested in building quality, long-term relationships, and has an outstanding, hard-
earned reference base to prove.
We provide turn-key field mobility solutions, warehouse management solutions, bar coding and RFID software and
hardware solutions, as well as all of the related wired and wireless infrastructure services necessary.

Our products and services include:

o Comprehensive Network Repair and Troubleshooting Services
o Wireless & Wired Network Site Survey
o Heat Map Design and Reporting
o Signal Propagation Design and Reporting
o Network And Cabling Design
o Network Security Design & Configuration
o Copper & Fiber Cabling Installation
o Equipment Configuration
o End-To-End Testing & Certification


MSA has been a leader in large scale wireless deployments for over 10 years. We have implementations with major
grocery chains, distribution environments, educational and technical institutions, banks, and all types of technology firms
across the US and Canada. Our engineers have expertise in designing and implementing wireless solutions in various
types of environments such as retail, warehouses, freezers, campuses, outdoor and point-to-point or multi-point bridging
and more.












Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close