2013 BSR NEW.xls

ITEM

DESCRIPTION

UNIT

B - EXCAVATION & EARTH WORK
B 01 Excavation Site preparation, Clearing site vegetation, removing bushes, shrubs & top soil to a depth not exceeding 6" and removing all debris away from site. Manual Excavation over site to reduce level in any material (except rock requiring blasting) including depositing and levelling as directed up to a distance not exceeding 30'. Manual Excavation over site to reduce level in any material (except rock requiring blasting ) including depositing and levelling as directed distance exceeding 30'-0" but not exceeding 1/4 mile. Shoring, dewatering and rock blasting if necessary for the excavation, shall be paid for separately for item B04 - B06 B 04 Manual Excavation for column, wall, staircase foundations in any material (except rock requiring blasting) up to 5'-0" depth, part return fill in and ram and surplus deposited within site as directed. Manual Excavation for column, wall, staircase foundations in any material (except rock requiring blasting) depth exceeding 5'-0" and not exceeding 10'-0", part return fill in and ram and surplus deposited within site as directed. Manual Excavation for column, wall, staircase foundations in any material (except rock requiring blasting) depth exceeding 10'-0" and not exceeding 15'-0", part return fill in and ram and surplus deposited within site as directed. Bulk excavation using machinery Bulk excavation using machinery including operator, Fuel, etc.. (Based on machine hours) Earth Work Supports Supplying and installation of pre-cast cylinders for soil improvement of 4'-0" dia. Hume pipes of wall thickness 2" and height of 2'-0"( Nominal Reinforced type ) and lowering hume pipes to loose soils with water table close to ground level to a depth of 12'-0" below the ground level. Rate shall include for removal of soil from inside the rings and lowering while de-watering up to the required depth of 12'-0".(Rate per 12'-0" depth per location) Earth work supports, (Open planking) in trenches total depth up to 5'-0", distance between opposing faces not exceeding 6'-6" Earth work supports, (Open planking) in trenches total depth exceeding 5'-0" and not exceeding 10'-0", distance between opposing faces not exceeding 6'-6" Cube Sqr.

B 02

Cube

B 03

Cube

B 05

Cube

B 06

Cube

B 07 B 08

Cube Per Hour

B 09

Item

B 10 B 11

Sq.ft. Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 1

B 12

Earth work supports, (Open planking) in trenches total depth exceeding 10'-0" and not exceeding 15'-0", distance between opposing faces not exceeding 6'-6" Earth work supports, (Close planking) in trenches total depth up to 5'0", distance between opposing faces not exceeding 6'-6" Earth work supports, (Close planking) in trenches total depth exceeding 5'-0" and not exceeding 10'-0", distance between opposing faces not exceeding 6'-6" Earth work supports, (Close planking) in trenches total depth exceeding 10'-0" and not exceeding 15'-0", distance between opposing faces not exceeding 6'-6" Filling & Compaction Note:Approved earth shall mean filling materials that comply to the following :

Sq.ft.

B 13 B 14

Sq.ft. Sq.ft.

B 15

Sq.ft.

(a) (b) (c) (d) B 16

The earth shall be free of vegetation, roots, boulders, easily decomposable materials, chemicals, industrial waste, plastic etc. The maximum size of particle shall not exceed 75mm. The earth shall be well graded and the silt and clay (fines) content shall not be more than 25% The Standard proctor density shall be grater than 1.70g/cm3 Approved hard Earth spreading , levelling watering and manual compaction, using standard cast iron stamper or equivalent and filling in 150 mm thick layers (loose volume) in restricted area (Earth available at site) Approved earth supplying within 16 Km from the source and piled at site (measured at piled volume) Transport of Earth per Km per cube for over and above 16km River Sand supply within 16km from the source (for distances over 16km, add Rs. 90 per Cube per Killo Meter) subject to the specific approval by the Divisional Engineer. (spreading , levelling , watering in 225mm thick layers and compaction using machine Rammer.) Rate is applicable for loose volume. In case of measurements to be done on compacted volume multiply the rate by 1.2. Dense graded 37.5mm aggregate base course (ABC) supplying within 16Km, spreading , levelling , watering in 225mm thick layers and compaction using machine Rammer. (loose volume). Rate include hire charges of the machine rammer. Graded Quarry dust 4.5mm downwards supplying within 16Km, spreading , levelling , watering in 225mm thick layers and compaction using machine Rammer.(loose volume). Rate include hire charges of the machine rammer. Cube

B 17 B 18 B 19

Cube 1 km Cube

B 20

Cube

B 21

Cube

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 2

B 22

Compaction of Earth including watering in 225mm thick layers (measured on piled volume) using machine Rammer. Rate include hire charges of the machine rammer. *** This rate is applicable for building construction with earth work not exceeding 50 cubes. (earth available at site). Manually spreading and levelling piled approved earth - H.S.R. item Ew -002 (applicable for filling out side the building area) rate without compaction. Test

Cube

B 23

Cube

B 24 B 25

Conducting a proctor density check on sample fill material. Field density testing of the compacted earth fill using Sand cone method.

Per Test Per Test

Antitermite -Treatment
B 26 Antitermite-treatment for the new construction with applying Biflexthrine 10Tc (Biflex ) or approved equivalent , Diluted chemicals 1:200 ratio with water after supplying the sealed bottle with labels to the site and should be followed the manufacture standards of application including horizontal & vertical barriers. It should be 10 years warranty on application. Sq.ft.

B 27

Antitermite-treatment for the post construction (Existing building ) with applying Biflexthrine 10Tc (Biflex ) or approved equivalent , Diluted chemicals 1:200 ratio with water after supplying the sealed bottle with labels to the site and should be followed the manufacture standards of application including horizontal & vertical barriers. It should be not less than 5 years warranty on application.

Sq.ft.

C - CONCRETE
Note: The Quality of the concrete should confirm to the relevant B.S., S.L.S. and ICTAD specification for Building works. IN - SITU PLAIN CONCRETE C 01 Cement concrete 1:3:6 (1 1/2") in foundation and under column footings with curing. Cement concrete 1:3:6 (1 1/2") in foundation and under column footings (lean concrete of 3" thickness) with curing. Cement concrete 1:3:6 (1") in foundation and under column footings (lean concrete of 2" thickness) with curing. Cement concrete 1:3:6 (1") in foundation and under column footings with curing. Cube

C 02

Sqr.

C 03

Sqr.

C 04

Cube

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 3

IN - SITU REINFORCED CONCRETE Note: The equivalent nominal mixes suggest for the concrete grades are given in table 4.4 for a 50kg cement bag and measuring boxes as given below. When concrete is prepared at the site with volume batching, the ICTAD Publication SCA/4/I shall be followed. Table 4.4

Quantities per 50 kg of cement Equivalent In order to ensure that theConcrete consistancy mix isbag inApprox. par with the Specified mix Fine of theCoarse Water Aggregate Aggregate content in Litres 3 3 1:1:2 30 0.035 m 0.07 m 20 Appendix 4D, trial mix shall be 1prepared the site and prior box 3 2at boxes 3 1:1 ½:3 25 0.053 m 0.105 m 22.5 ½ boxes 3 boxes approval to be obtained from the 1 Divisional Engineer. 3 3 1:2:4 20 0.07 m 2 boxes 0.14 m 4 boxes 25

Procedure for approval of trial mix is given below. (a) Cement should have a compressive strength Class of 2 42.5N/mm (b) River sand shall satisfy with the grading criteria prescribed in Table 4.2 in the ICTAD Publication SCA/4/I. (c) Coarse aggregate shall meet the grading criteria prescribed for the volume batching using the measurement boxes as indicated in the Clause 4.3.1(SCA/4/I). The internal dimensions of the boxes are 400 x 350 x 250mm (which is 0.035m3 and corresponds to the volume of 1 bag of cement weighing 50 kg). The proportioning of sand shall be on the basis of its dry volume and in the case of damp sand allowance for bulkage shall be made as given in Appendix 4C.

(d) Water content shall be added by measuring. (e) In-case of hand mixing, mixture shall be prepared in a surface that will not allow loss of water. (f) Cement shall be added in bag form. Concrete shall be mixed by a mechanical mixer unless otherwise the Technical officer in-charge permits for hand mixing.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 4

Addition of water to compensate for stiffening of the concrete shall not be permitted. In case of adjustment need to be done on the consistancy of an already mixed concrete, additional cement slurry ( not merely the water) may be allowed by the technical officer while keeping the water: cement ratio and consistancy un-altered. As a rule of thumb, 10% of the cement quantity may be mixed with water to form a cement slurry. The layers of concrete shall be so placed that the bottom layer does not finally set before the top layer is placed. Compaction shall be completed before the initial setting starts i.e. within 30 minutes of addition of water to the dry mixture. Re-tempering of concrete shall not be permitted. For more detail refer Chapter 4 of ICTAD specification for building work SCA/4/I. Volume Batched Grade 20 concrete in footings, beams, lintels, columns and concrete bedding in floors prepared at site using mixer and vibrator in ground floor. Rate shall include the cost of curing continuously for 7 days. Volume Batched Grade 20 concrete in beams/lintols and columns in first floor prepared at site using mixer and vibrator. Rate shall include the cost of curing continuously for 7 days. Volume Batched Grade 20 concrete in beams/lintols and columns in second floor prepared at site using mixer and vibrator. Rate shall include the cost of curing continuously for 7 days. Volume Batched Grade 25 concrete prepared at site using mixer and vibrator in ground floor. Rate shall include the cost of curing continuously for 7 days. Volume Batched Grade 25 concrete prepared at site using mixer and vibrator in first floor. Rate shall include the cost of curing continuously for 7 days. Volume Batched Grade 25 concrete prepared at site using mixer and vibrator in second floor. Rate shall include the cost of curing continuously for 7 days. Pre-cast lintols size 9" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 8" c/c including necessary formwork in ground floor with curing continuously for 7 days. Pre-cast lintols size 9" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 8" c/c including necessary formwork in first floor with curing continuously for 7 days.

C 05

Cube

C 06

Cube

C 07

Cube

C 08

Cube

C 09

Cube

C 10

Cube

C 11

L.ft.

C 12

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 5

C 13

Pre-cast lintols size 9" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 8" c/c including necessary formwork in second floor with curing. Pre-cast lintols size 4 1/2" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in ground floor with curing continuously for 7 days. Pre-cast lintols size 4 1/2" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in first floor with curing continuously for 7 days. Pre-cast lintols size 4 1/2" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in second floor with curing continuously for 7 days. Pre-cast lintols size 4" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in ground floor with curing continuously for 7 days. Pre-cast lintols size 4" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in first floor with curing continuously for 7 days. Pre-cast lintols size 4" x 6" deep in Grade 20 concrete, reinforced with 2 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in second floor with curing continuously for 7 days. Pre-cast lintols size 6" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in ground floor with curing continuously for 7 days. Pre-cast lintols size 6" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in first floor with curing continuously for 7 days. Pre-cast lintols size 6" x 6" deep in Grade 20 concrete, reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild steel stirrups @ 6" c/c including necessary formwork in second floor with curing continuously for 7 days. Stiffiner columns size 4" x 6" in Grade 20 concrete, reinforced with 2 nos of 10mm dia. Tor steel bars , including necessary form work with curing continuously for 7 days. Stiffiner columns size 4 1/2" x 6" in Grade 20 concrete, reinforced with 2 nos of 10mm dia. Tor steel bars , including necessary form work with curing continuously for 7 days.

L.ft.

C 14

L.ft.

C 15

L.ft.

C 16

L.ft.

C 17

L.ft.

C 18

L.ft.

C 19

L.ft.

C 20

L.ft.

C 21

L.ft.

C 22

L.ft.

C 23

L.ft.

C 24

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 6

C 25

Stiffiner columns size 9" x 6" in Grade 20 concrete, reinforced with 2 nos of 10mm dia.Tor steel bars and 6mm mild steel stirrups @ 6" c/c , including necessary form work with curing continuously for 7 days. Copings on the 4 1/2" thick walls, size of 6 1/2" x 3" in Grade 20 concrete, reinforced with 1 no of 10mm dia. Tor steel bar, including necessary form work & 1:3 cement plastering with curing continuously for 7 days , as per the Drawing No:- AR/DETAIL DRG/2010/01/10 & Sheet No. 02 Copings on the 6" thick walls, size of 8" x 3" in Grade 20 concrete, reinforced with 2 nos of 10mm dia. Tor steel bars and 6mm mild steel @ 6" c/c, including necessary form work & 1:3 cement plastering with curing continuously for 7 days , as per the Drawing No:- AR/DETAIL DRG/2010/01/10 & Sheet No. 02 Copings on the 9" thick walls, size of 11" x 6" approx. in Grade 20 concrete, reinforced with 2 nos of 10mm dia. Tor steel bars and 6mm mild steel @ 6" c/c, including necessary form work & 1:3 cement plastering with curing continuously for 7 days, as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 02 Cement concrete drains of internal size 9" wide and depth varies from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1") including 1/2" thick 1:3 rendering without ramp including necessary formwork with curing continuously for 7 days.. Cement concrete drains of internal size 9" wide and depth varies from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1") including 1/2" thick 1:3 rendering with 3" thick & 1'-6" width concrete ramp, including necessary formwork with curing continuously for 7 days.. Cement concrete drains of internal size 9" wide and depth varies from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1") including 1/2" thick 1:3 rendering with 3" thick & 2'-6" width concrete ramp, including necessary formwork with curing continuously for 7 days. Construction of concrete drain 300mm width x 350mm depth and varies up to 400mm. Consists of necessary excavation in hard earth, 75mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface with size 450mm wide x 600mm long, 75mm thick Grade 20 removable cover slabs with side formwork. Drain and cover slab reinforced with tor steel 10mm at 150m c/c both ways with curing continuously for 7 days. Construction of concrete drain 300mm width x 350mm depth and varies up to 400mm. Consists of necessary excavation in hard earth, 75mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface without cover slab. Drain reinforced with tor steel 10mm at 150m c/c both ways with curing continuously for 7 days.

L.ft.

C 26

L.ft.

C 27

L.ft.

C 28

L.ft.

C 29

L.ft.

C 30

L.ft.

C 31

L.ft.

C 32

L.ft.

C 33

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 7

C 34

Construction of concrete drain 450mm width x 600mm minimum depth and varies up to 750mm. Consists of necessary excavation in hard earth, 100mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface with adequate slope, 75mm thick Grade 20 removable cover slabs with side formwork. Drain and cover slab reinforced with tor steel 10mm at 150m c/c both ways with curing continuously for 7 days. Construction of concrete drain 450mm width x 600mm minimum depth and varies up to 750mm. Consists of necessary excavation in hard earth, 100mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface with adequate slope without cover slab, with necessary formwork. Drain reinforced with tor steel 10mm at 150m c/c both ways with curing continuously for 7 days. Casting of 6" x 6" x 6" concrete cubes on a steel mould, curing for 7 days continuously and testing for compressive strength at an approved laboratory (rate includes transport of cubes from site to laboratory ). Continuous curing of reinforced concrete columns of size up to 18" x 18" by covering with gunnies and spraying water and keeping wet for a period of 5 days after removal of shuttering. READY MIX CONCRETE Ready mix concrete of grade 20(20 N/mm2) confirming to SLS 11441997, transport 20km from batching plant. Ready mix concrete of grade 25(25 N/mm2) confirming to SLS 11441997, transport 20km from batching plant. Ready mix concrete of grade 30(30 N/mm2) confirming to SLS 11441997, transport 20km from batching plant. Transport charges per Km per 5m3 truck for over and above 15 km. Placing , levelling , vibrating the concrete. Pumping charge for quantities up to 30 m3 by pump car. For more than 30 m additional pumping charges. (Rate for every m over and above 30 m3)
3 3

L.ft.

C 35

L.ft.

C 36

Nr.

C 37

L.ft.

C 38 C 39 C 40 C 41 C 42 C 43 C 44

m3 m3 m3 5m3/Km m3 Item m3

D - FORM WORK
Note: The rates given for items D 02, D 03 to D 08 herein are applicable for 15 mm thick plywood sheets/steel. Hence the rate is valid only if the shuttering / formwork for footing , column , beams , lintel, walls, slabs are of 15 mm thick ply boards/ steel shuttering. Any deviation from the specified materials, specified thickness and the arrangement of formwork given in this document should require the written approval of the Divisional Engineer. Rate for such deviation from the item description will be decided by the D(B/SW)

(a)

(b)

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 8

(c) D 01 D 02 D 03 D 04 D 05 D 06 D 07 D 08 D 09

For ordinary plywood of 15 mm thick boarding as shuttering, (Even for WBP sheets/steel shuttering the same rate shall be applicable). Shuttering for sides of foundation with 1" thick rubber planking including dismantling Shuttering for sides and bottom of plinth beams, ground beams including dismantling in 15mm thick plywood board/ steel. Shuttering for pantry slab including dismantling in 15mm thick Plywood board/steel. Shuttering for floor slab including dismantling in 15mm thick Plywood board/steel. Shuttering for columns including dismantling in 15mm thick Plywood board/steel. Shuttering for Beams/Lintols including dismantling in 15mm thick plywood board/steel. Shuttering for floor slab including dismantling in 15mm thick Plywood board/steel support by scaffolding up to 12'. Shuttering for floor slab including dismantling in 15mm thick Plywood board/steel support by scaffolding up to 16'. Shuttering for Beams/Lintols including dismantling in 15mm thick Plywood Board/steel support by G.I Jack. Note: The rates given in Items D09, D10, D11 herein are applicable for Rubber planks. The rubber planks are allowed only for minor works and should be used with the written approval of the D.E. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr.

D 10 D 11 D 12

Shuttering for Beams/Lintols including dismantling. Shuttering for stiffener columns between wall panels in 9" walls, 4 1/2" walls and in boundary walls. Shuttering for R.C.C. copings in top of balcony , stair and boundary walls and pre - cast lintel sides

Sqr. Sqr. Sqr.

E - REINFORCEMENT
E 01 Mild steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in Ground floor . Mild steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in first floor . Mild steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in second floor . Tor steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in Ground floor. Kg

E 02

Kg

E 03

Kg

E 04

Kg

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 9

E 05

Tor steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in first floor. Tor steel reinforcement to slabs, beams, lintols, columns, footings & etc.. bent to shape, laid in position and tied with 16 B.W.G. Aneal binding wire in second floor. Rate for testing of Tor-steel specimen of 1m length for mechanical properties at an approved laboratory. Application of two coats of Corrosion resistant primer of "BARRA ZINC SP" or equivalent to all exposed reinforcements including preparing surfaces.

Kg

E 06

Kg

E 07 E 08

Sample Sq.ft.

F - BRICK MASONRY
F 01 F 02 F 03 F 04 F 05 F 06 F 07 F 08 F 09 F 10 F 11 Brick work in cement and sand 1:8 in foundation up to D.P.C. level. Brick work in cement and sand 1:8 in super Structure in ground floor. ( 9" thick brick work) Brick work in cement and sand 1:8 in first floor level.(9" thick brick work) Brick work in cement and sand 1:8 in second floor level.(9" thick brick work) Brick work in cement and sand 1:8 in superstructure in ground floor (8" thick brick work) Brick work in cement and sand 1:8 in first floor level.(8" thick brick work) Brick work in cement and sand 1:8 in second floor level.(8" thick brick work) Brick work in cement and sand 1:5 in 4 1/2" thick walls in ground floor. Brick work in cement and sand 1:5 in 4 1/2" thick walls in first floor Brick work in cement and sand 1:5 in 4 1/2" thick walls in floor second Cube Cube Cube Cube Cube Cube Cube Sqr. Sqr. Sqr. L.ft.

Brick drain internal size 9" x 9"(average depth) , including excavation, back filling , 3" thick plain concrete 1:3:6(1") base, 4 1/2" thick Brick side walls in cement and sand mortar 1:5 , rendering 1/2" thick cement and sand 1:3 and finish smooth with cement putty. 3" thick brick paving in cement and sand 1:8 mix 4 1/2" thick wire cut brick wall in cement and sand 1:5 in ground floor. 4 1/2" thick wire cut brick wall in cement and sand 1:5 in first floor. 4 1/2" thick wire cut brick wall in cement and sand 1:5 in second floor. 9" thick wire cut brick wall in cement and sand 1:5 in ground floor.

F 12 F 13 F 14 F 15 F 16

Sqr. Sqr. Sqr. Sqr. Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 10

F 17 F 18 F 19 F 20 F 21 F 22

9" thick wire cut brick wall in cement and sand 1:5 in first floor. 9" thick wire cut brick wall in cement and sand 1:5 in second floor. Steps 1' - 1 1/2" in brick in cement and sand 1:5 with 1/2" thick rendering in cement and sand 1:2 including 6" high foundation. Brick piers in cement and sand 1:5 in ground floor. Brick piers in cement and sand 1:5 in first floor. Brick piers in cement and sand 1:5 in second floor.

Sqr. Sqr. L.ft. Cube Cube Cube

G - CELLULAR AND SOLID BLOCK MASONRY
G 01 8" thick cement sand Cellular block wall (blocks confirming to S.L.S. 855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in ground floor. 6" thick cement sand Cellular block wall (blocks confirming to S.L.S. 855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in ground floor. 4" thick cement sand Cellular block wall (blocks confirming to S.L.S.855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in ground floor. 6" thick cement sand Solid block wall (blocks confirming to S.L.S. and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in ground floor. 4" thick cement sand Solid block wall (blocks confirming to S.L.S and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in ground floor. Supply and fixing 1'-0" x 1'-0" cement grill on wall. Supply and fixing glass blocks size 8" x 8" Sqr.

G 02

Sqr.

G 03

Sqr.

G 04

Sqr.

G 05

Sqr.

G 06 G 07

Sq.ft. Sq.ft.

H - RUBBLE MASONRY
H 01 Random rubble (6"-9") masonry in cement mortar 1:5 in wall foundation and retaining walls. Cube

J - FLOORING
J 01 J 02 J 03 3/4" thick D.P.C. in cement sand 1:2 finished with 2 coats of D.P.C. tar and blinded with sand. Gauge 1000 polythene damp proof membrane with 6" laps laid under floors. Rendering 1/2" thick in cement and sand 1:2 in exposed concrete surfaces and garage floors finished smooth with neat cement slurry. Rendering 1/2" thick in cement and sand 1:2 in exposed concrete surfaces and garage floors finished smooth with colour pigment. ( Pigment added at 2.5 Kg / Sqr ) Rendering 1/2" thick in cement and sand 1:3 in R.C.C. floors and paved floors finished smooth with neat cement slurry and colour pigment. Sqr. Sqr. Sqr.

J 04

Sqr.

J 05

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 11

J 06 J 07

Rendering 1/2" thick in cement and sand 1:3 in R.C.C. floors and paved floors finished smooth without colour pigment. 1/2" thick Rendering to the top surface of the sunshade with cement and sand 1:3 finished smooth and treated with two coats of "Aqua Tuff " by M/s Lankem or approved equivalent and 1:80 slope should be made. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with cement floating including forming groove in ground floor. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with colour pigmented neat cement including forming groove in ground floor. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with cement floating including forming groove in first floor. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with colour pigmented neat cement including forming groove in first floor. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with cement floating including forming groove in second floor. Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with colour pigmented neat cement including forming groove in second floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with cement floating including forming groove in neat cement slurry in ground floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with colour pigmented neat cement including forming groove in ground floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with cement floating including forming groove in neat cement slurry in first floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with colour pigmented neat cement including forming groove in first floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with cement floating including forming groove in neat cement slurry in second floor. Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with colour pigmented neat cement including forming groove second floor. 3" thick brick paving in cement sand 1:8 and 1/2" thick cement rendered in 1:3 floated with neat cement. 3" thick brick paving in cement sand 1:8 and 1/2" thick cement rendered in 1:3 floated with neat cement and colour pigment.

Sqr. Sqr.

J 08

L.ft.

J 09

L.ft.

J 10

L.ft.

J 11

L.ft.

J 12

L.ft.

J 13

L.ft.

J 14

L.ft.

J 15

L.ft.

J 16

L.ft.

J 17

L.ft.

J 18

L.ft.

J 19

L.ft.

J 20 J 21

Sqr. Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 12

J 22

3" thick floor cement concrete in 1:2:4(3/4") and 1/2" thick rendering in cement sand 1:2 finished smooth with neat cement & colour pigment and expansion joints filled with cement and sand. Brick work in cement 1:5 wearing & throating on 4 1/2" brick wall including 1/2" thick 1:3 cement rendering Brick work in cement 1:5 wearing & throating on 9" brick wall including 1/2" thick 1:3 cement rendering

Sqr.

J 23 J 24

L.ft. L.ft.

Water Proofing
The rates for Items J 17 to J 20 are strictly applicable, subject to the fulfilment of the following conditions. The waterproofing contractor (or sub-contractor) should be a registered specialist contractor at the ICTAD in the category of water proofing. The Contractor shall submit a written warranty of at least 10 year to cover on the quality of the material, suitability of the material for the situation and the workmanship including water tightness. The water proofing material shall conform to relevant British, Euro or ASTM specifications Application of liquid polymer cement water proofing agents for the following areas: Water Proofing the inner surface of walls and floor slab of toilets and balconies where a waterproofing is necessary before tiling, Application of "Baralastic" polymer modified cementations waterproofing agent after cleaning the substrate all as per manufacturer's specifications with 10 years warranty on application. Rate shall include for ponding test for a 300mm water height kept for a period of 48 hours. Flat roofs, concrete/masonry tanks, wet areas of toilets including bathrooms, exposed balconies, concrete gutters. "Smart flex", "Tharoseal" or any other equivalent product marketed/installed by specialist contractor registered at ICTAD. Application of cementations type agents On newly cast under ground sumps, swimming pools basements. "Osmoseal", "Xypex", "Vandex" or any other equivalent product marketed/installed by a specialist contractor registered at ICTAD. Application of membrane type agents J 28 On large flat roofs, gutters, basements 3mm thick Torch-on membrane or any other equivalent product marketed/installed by a specialist contractor registered at ICTAD, including 1 : 3 cement, sand protective screed laid to slope. Rate shall include the formation of edges, torch welding and metal strip on vertical walls. The above rates include the cost of surface preparation, but do not include the cost of protective masonry screed. The approving authority for equivalent products will be the Deputy Chief Secretary (Engineering) Sq.ft.

(a)

(b)

(c) (d) J 25

Sq.ft.

J 26

Sq.ft.

J 27

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 13

K - PLASTERING
K 01 K 02 5/8" thick plastering to plinth wall in cement sand 1:3 including cement floating. Plastering 5/8" thick to walls in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished semi-rough with wooden float. (Sand to be sieved). Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished semirough with wooden float in ground floor. Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished semirough with wooden float in first floor. Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished semirough with wooden float in second floor. Plastering 5/8" thick to walls in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished smooth with lime putty. Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished smooth with lime putty in ground floor. Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished smooth with lime putty in first floor. Plastering 5/8" thick to reveals width not exceeding 6" in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 finished smooth with lime putty in second floor. Plastering 3/8" thick to soffit of slab, sunshade, sides and soffit of beams, stair cases and sides of columns in cement and sand 1:3 including floating with lime putty. Plastering 3/8" thick to soffit of slab, sunshade, sides and soffit of beams, stair cases and sides of columns in cement & sand 1:3 finished semi rough with wooden float. Forming drip for sunshade edge cement & sand 1: 2 finish semi rough in ground floor. Forming drip for sunshade edge cement & sand 1: 2 finish semi rough in first floor. Forming drip for sunshade edge cement & sand 1: 2 finish semi rough in second floor. Plastering 3/4" thick to black board in cement & sand 1:3 finish semi rough and Rendering cement floating coat using black cement finished smooth with carborandum stone. Including preparation of border. Plaster bands 6" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in ground floor as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 01 Sqr. Sqr.

K 03

L.ft.

K 04

L.ft.

K 05

L.ft.

K 06

Sqr.

K 07

L.ft.

K 08

L.ft.

K 09

L.ft.

K 10

Sqr.

K 11

Sqr.

K 12 K 13 K 14 K 15

L.ft. L.ft. L.ft. Sqr.

K 16

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 14

K 17

Plaster bands 6" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in first floor as per the Drawing No:- AR/DETAIL DRG/2010/01/10 & Sheet No. 01 Plaster bands 6" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in second floor as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 01 Plaster bands 9" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in ground floor as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 01 Plaster bands 9" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in first floor as per the Drawing No:- AR/DETAIL DRG/2010/01/10 & Sheet No. 01 Plaster bands 9" x 1/2" in cement & sand 1:3 finished semi rough, extra over the plastering in second floor as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 01

L.ft.

K 18

L.ft.

K 19

L.ft.

K 20

L.ft.

K 21

L.ft.

L - TILING
Note: Tiles should comply with European standard specification CEN 177. For Item L01 - L03 Should be tile range manufactured by Lanka Wall Tile or approved equivalent. L 01 Wall Tiling Glazed ceramic wall tiling of size 8" x 12" approved colour, supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile. (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L04) (Prime Cost of tile Rs.85.00) Glazed ceramic wall tiling of size 12" x 16" approved colour, supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile. (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L04) (Prime Cost of tile Rs.210.00) Glazed porcelain wall tiling of size 24" x 12" approved colour, supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile. (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L04) (Prime Cost of tile Rs.402.00) Cement and sand 1:3 screed of 1/2" thick backing to receive wall tiles. Floor Tiling Note : For Item No. L05 to L17 Shall be Homogenous, Vitreous porcelain floor tiles of industrial grade (heavy duty) Floor tile range manufactured by Rocell or approved equivalent. Rate includes the cost of 1:3 motar levelling bed. Sqr.

L 02

Sqr.

L 03

Sqr.

L 04

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 15

L 05

Homogeneous vitreous porcelain glazed or unglazed floor tile 8" x 8" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.72.00) Homogeneous vitreous porcelain glazed or unglazed floor tile 12" x 12" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.163.00) Homogeneous vitreous porcelain glazed or unglazed floor tile 16" x 16" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.288.00) Homogeneous vitreous porcelain polished floor tile 12" x 12" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile.( Heavy duty ) (Prime Cost of tile Rs.266.00) Homogeneous vitreous porcelain polished floor tile 16" x 16" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.492.00) Homogeneous vitreous porcelain rectified floor tile 24" x 12" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.475.00) Homogeneous vitreous porcelain rectified floor tile 24" x 16" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.500.00) Homogeneous vitreous porcelain rustic floor tile 12" x 12" for garage & balcony areas paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.152.00) Homogeneous vitreous porcelain rustic floor tile 16" x 16" for garage & balcony areas paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.275.00) Homogeneous vitreous porcelain glazed floor tile 18" x 18" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.360.00) Supply and laying of 4" high skirting including tile grout to match the tile of tiling confirming to items L 05 to L 14 Supply and laying of 4" high skirting including tile grout to match the tile for staircases. Supplying and laying homogeneous vitreous porcelain tiles at staircase treads including nosing type paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile.

Sqr.

L 06

Sqr.

L 07

Sqr.

L 08

Sqr.

L 09

Sqr.

L 10

Sqr.

L 11

Sqr.

L 12

Sqr.

L 13

Sqr.

L 14

Sqr.

L 15 L 16 L 17

L.ft. L.ft. Sqr.

Note :
The tiles specified in L18 to L24 are exclusively for residential/nonpublic area as specified by an Architect. The rate is applicable for tiles manufactured by Rocell or equilant and are of coloured designed tiles.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 16

L 18

Lay Ceramic glazed floor tiles 12" x 12" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.105.00) Lay Ceramic glazed floor tiles 13" x 13" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.143.00) Lay Ceramic glazed floor tiles 16" x 16" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.215.00) Lay Ceramic glazed floor tiles 18" x 18" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.305.00) Lay Ceramic glazed floor tiles 24" x 12" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.375.00) Lay Ceramic glazed floor tiles 24" x 16" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.442.00) Lay Ceramic glazed floor tiles 2'-0" x 2'-0" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile. (Prime Cost of tile Rs.770.00) Note : Rate for tiling should include for cement and sand 1:3 backing 20mm thick including pointing and grout to match with tiles colours and sizes of tiles to approval by the Architect.

Sqr.

L 19

Sqr.

L 20

Sqr.

L 21

Sqr.

L 22

Sqr.

L 23

Sqr.

L 24

Sqr.

L 25

L 26

Rough porcelain bathroom floor tiles of size 8" x 8" of Rocell or equivalent, paving on 1:3 cement sand bedding and pointed with tile grout to match the tiles. (Prime Cost of tile Rs.70.00) Rough porcelain bathroom floor tiles of size 12" x 12" of Rocell or equivalent, paving on 1:3 cement sand bedding and pointed with tile grout to match the tiles. (Prime Cost of tile Rs.135.00) Granite The Granite specified sizes, colour and details of paving decided by Architect and sample should be approved by the Architect before the construction. The rate is applicable for Granite manufactured by "Ally Weerasinghe" or approved equivalent. Granite should be without any defects from oils , detergents & chemicals

Sqr.

Sqr.

L 27

Polished Granite size 1'-0" x 1'-0" x 3/4" thick absolutely black for vanity top, laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout. (Prime Cost of tile Rs.1300.00)

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 17

L 28

Polished Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick absolutely black, laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout. (Prime Cost of tile Rs.1300.00) Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick rough finish, laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout. (Prime Cost of tile Rs.390.00) Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick gloss finish, laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout. (Prime Cost of tile Rs.390.00) Granite floor slabs of size 2'-0" x 1'-0" x 3/4" thick gloss finish, laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout. (Prime Cost of tile Rs.1380.00) Design Floor Tiles

Sqr.

L 29

Sqr.

L 30

Sqr.

L 31

Sqr.

L 32

Porcelain polished design floor tile 32" x 32" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.2950.00) Porcelain polished design floor tile 24" x 24" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.1340.00) Porcelain matt & gloss design floor tile 24" x 24" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.1070.00) Porcelain matt & gloss design floor tile 20" x 20" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.760.00) Porcelain matt & gloss design floor tile 24" x 16" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.610.00) Porcelain matt & gloss design floor tile 18" x 18" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.435.00) Ceramic design floor tile 16" x 16" paving on 1:3 cement & sand bedding and pointed with tile grout to match the tile. ( Heavy duty ) (Prime Cost of tile Rs.255.00)

Sqr.

L 33

Sqr.

L 34

Sqr.

L 35

Sqr.

L 36

Sqr.

L 37

Sqr.

L 38

Sqr.

M - COLOUR WASHING, PAINTING & POLISHING
M 01 M 02 M 03 White washing walls two coats in single storied building including preparing surface. White washing walls two coats in two storied building including preparing surface. Painting walls with one coat of wall primer including preparing surface. Sqr. Sqr. Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 18

M 04 M 05 M 06 M 07 M 08 M 09 M 10 M 11 M 12 M 13 M 14

Painting walls with one coat of emulsion paint including preparing surface. Painting walls with two coats of emulsion paint including preparing surface. Painting soffit with one coat of emulsion paint including preparing surface.. Painting soffit with two coats of emulsion paint including preparing surface. Painting walls with one coat of weathershield paint including preparing surface. Painting walls with two coats of weathershield paint including preparing surface. Painting walls & soffits with one coat of crack binder primer. Cement washing two coats to walls in single storied buildings including preparing surface. Painting walls with one coat of enamel paint including preparing surface. Painting walls with two coats of enamel paint including preparing surface. Application of plaster coatings of thickness not less than 2mm using "Joint compound powder / Skimcoat ", or approved equivalent to walls, slab, beam, column facings. Rate shall include for sand papering and surface preparation. Painting black boards with two coats of blackboard paint including preparing surface. Preparing and painting old wood work with one coat of enamel paint. Preparing and painting old wood work with two coats of enamel paint. Preparing and painting new wood work with primer and two coats enamel paint. Preparing and application of water based stain and two coats of water based sealant to new wood work. Rate shall include for preparing the surface. Varnishing two coats with polyurethane varnish after sand papering and application of sealer coat Spray Painting for the wood work as per specified in SCA/4/1 clause 14.9 ( f ). Wax polishing to timber in panels and floors. Applying one coat of approved type floor polish including smoothing.

Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. Sqr.

M 15 M 16 M 17 M 18 M 19

Sqr. Sqr. Sqr. Sqr. Sqr.

M 20 M 21 M 22 M 23

Sqr. Sqr. Sqr. Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 19

M 24 M 25 M 26 M 27

Painting floors with one coat of quick drying floor paint including washing and cleaning surfaces. Painting steel work with one coat of anti-corrosive paint with primer including removing corroded scale and wire brushing. Painting steel work with two coats of anti-corrosive paint with primer including removing corroded scale and wire brushing. Painting steel work with one coat of "EPILACK EPOXY COALTAR" or approved equivalent as per manufacturer's specifications. Painting steel work with two coats of Zinc phosphate primer including removing corroded scale and wire brushing. Labour rate for two coats of Emulsion Painting walls including scaffolding (Paint & Brushes supplied by the client) Labour rate for single coat of Emulsion Painting walls including scaffolding (Paint & Brushes supplied by the client) Labour rate for two coats of enamel painting (Paint & Brushes supplied by the client)

Sqr. Sqr. Sqr. Sqr.

M 28 M 29 M 30 M 31

Sqr. Sqr. Sqr. Sqr.

N - DOORS & WINDOWS
Timber : 1 2 (a) (b) (c) (d) (e) (f) (g) N 01 Refer preamble note for approved species. Finished door sash size of less than 1" thicknesses not allowed. Glass thickness to be 5mm. Rate with out following heavy duty brass furniture. Doors :- 3 no. 4"x 3" Solid brass hinges Doors :- 2 no. 6" Solid brass barrel bolts Windows of 4'-0" ht. :- 2 no. 4"x 2" Solid brass hinges Windows above 4'-0" ht. :- 3 no. 4"x 2" Solid brass hinges Windows :- 1 no. 2" Solid brass Brass ring Windows :- 1 no. 10" Solid brass Casement Stay Windows :- 1 no. Solid brass Casement Fastner Doors Door flush panelled 1 1/8" thick single sash hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock. Door glazed and panelled 1 1/8" thick single sash hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock. Door flush panelled 1" thick single sash hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock. Door glazed and panelled 1" thick single sash hung with 3 3/4" x 2 3/4" frame . Rate without brass furniture, painting and lock. Sq.ft.

N 02

Sq.ft.

N 03 N 04

Sq.ft. Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 20

N 05

Door 30mm thick plywood ordinary sash single hung on 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock.

3

Sq.ft.

N 06

Door 30mm thick plywood (marine) sash single hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock. Door or window glazed and/or panelled 1 1/8" thick double sash hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting and lock. Door/Window ledged, braced & battened with 3 3/4" x 2 3/4" frames and 7/8" thick sash made out of GINISAPU. Rate without brass furniture, painting and lock. Supply & fixing 1 1/8" thick flush panelled door sash only. Rate without brass furnitures, door lock and painting. Supply & fixing 1" thick flush panelled door sash only. Rate without brass furnitures, door lock and painting. Supply & fixing 1 1/8" thick glazed & panelled door sash only. Rate without brass furnitures, door lock and painting. Supply & fixing 1" thick glazed & panelled door sash only. Rate without brass furnitures, door lock and painting. Supply & fixing 30mm thick plywood door sash only. Rate without brass furnitures, door lock and painting. Door frame 3 3/4" x 2 3/4" in approved timber supplying & fixing in position. Windows Window glazed 1 1/8" sash and 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting. Window glazed 1" sash and 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting. Window glazed 7/8" sash and 3 3/4" x 2 3/4" frame. Rate without brass furniture, painting. Timber slats with 3 3/4" x 1 3/4" frame , 1" x 2 1/2" vertical slats at 2 1/2" centers. Painting measured separately. Supply & fixing 1 1/8" thick glazed window sash only. Rate without brass furnitures and painting. Supply & fixing 1" thick glazed window sash only. Rate without brass furnitures and painting. Supply & fixing 7/8" thick glazed window sash only. Rate without brass furnitures and painting. Window frame 3 3/4" x 2 3/4" in approved timber supplying & fixing in position.

Sq.ft.

N 07

Sq.ft.

N 08

Sq.ft.

N 09

Sq.ft.

N 10

Sq.ft.

N 11

Sq.ft.

N 12

Sq.ft.

N 13

Sq.ft.

N 14

Sq.ft.

N 15 N 16 N 17 N 18 N 19 N 20 N 21 N 22

Sq.ft. Sq.ft. Sq.ft. Sq.ft. Sq.ft. Sq.ft. Sq.ft. Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 21

P - BRASS FOUNDER
Note: All Iron mongary shall be heavy duty and samples should be approved by the D.E. Prior to installation. In view of the variety of door locks available in the market, it has become necessary to prescribe the exact quality requirements in terms of performance and durability aspects. The "Union" brand and respective model numbers have been choosen as a bench mark to establish the said requirements. The brand name and model number appearing in the respective BSR items are purely meant to describe the performance standard of the said fitting/item and does not imply in any manner that only the "Union" brand is recommended or considered to be restricted to the "Union" brand. Any other make/brand that has equivalent performance characteristics are considered as equivalent provided such fittings met with following criteria. has an authorized local agent in Sri Lanka The local agent has been in the trade of the offered make for not less than 5 years. The fittings are manufactured in conformity to BS, JIS, A.S.T.M., A.S. or S.L.S. standards. The dimensions are/and performance characteristics are in par with the stated model. The brands that may be considered as equivalent are "Miva" of Japan "Whitco" of Australian make or "Dorma" of European make. or any other approved make which prior approval to be obtained from Deputy Chief Secretary (Engineering) after producing necessary catalogues documents. The BSR Items Nos. P 01 - P 12 are payable only after producing an original invoice from the authorized agent for "Union" brand. Union Brand P 01 Supply and fixing Stainless Steel hinges of size 102 x 76 x 2mm of Union Brand & Model no.- X8203-BB-2 or approved equivalent. Supply and fixing Stainless Steel hinges of size 102 x 76 x 3mm of Union Brand & Model no.- X8203-BB-3 or approved equivalent. Supply and fixing Stainless Steel hinges of size 127 x 89 x 3mm of Union Brand & Model no.- X8205-BB-3 or approved equivalent. Pair

1

2

3 (a) (b) (c) (d)

4

5

P 02

Pair

P 03

Pair

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 22

P 04 P 05 P 06

Supplying and fixing Night - latch lock of Union Brand & Model No. 1028 WEPL or approved equivalent. Supplying and fixing Night - latch lock of Union Brand & Model No. 1022 SEPL or approved equivalent. Supplying and fixing two lever Mortice door lock for single sash of Union Brand & Model no.-678.24.95 CH or approved equivalent. Supplying and fixing two lever Mortice door lock for double sash of Raniyo Brand & Model no.- 965.41.94 CH or approved equivalent. Supplying and fixing cylindrical door lock of Union Brand & Model no. -96300-SS.or approved equivalent

Nr. Nr. Nr.

P 07

Nr.

P 08 P 09 P 10 P 11 P 12

Nr. Nr. Nr. Nr. Nr.

Supplying & fixing rim lock of Raniyo Brand & Model no. 1445 or approved equivalent. Supplying & fixing hydraulic door closer of Union Brand & Model no. - 8823 SIL or approved equivalent. Supplying & fixing stainless steel Male or Female Symbol of Union Brand & Model no. - 200SS or approved equivalent. Supplying & fixing stainless steel Disabled Symbol of Union Brand or approved equivalent.
M.M.Noorbhoy Fittings Supplying and fixing 4" x 2 1/2" x 2.5mm thick solid brass hinges without ball bearing inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing 4" x 3" x 2.5mm thick solid brass hinges with-out ball bearing inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing 5" x 3" x 2.5mm thick solid brass hinges with-out ball bearing inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing heavy duty solid brass casement fastener inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing heavy duty solid brass casement stay - 6" inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing heavy duty solid brass casement stay - 12" inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing heavy duty solid brass 4" centre pivot inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing 4" long heavy duty solid brass tower bolt inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent.

P 13

Nr.

P 14

Nr.

P 15

Nr.

P 16

Nr.

P 17

Nr.

P 18

Nr.

P 19

Pair

P 20

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 23

P 21

Supplying and fixing 6" long heavy duty solid brass tower bolt inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing 8" long heavy duty solid brass tower bolt inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing 10" long heavy duty solid brass tower bolt inclusive of brass screws marketed by M.M.Noorbhoy & company or approved equivalent. Supplying and fixing solid brass Door or Window pull ring of 1" dia. ( Small ) Supplying and fixing solid brass Door or Window pull ring of 1 1/4" dia. ( Medium ) Supplying and fixing solid brass Door or Window pull ring of 2" dia. ( Large ) Supplying and fixing solid brass fanlight catch. Other Fittings

Nr.

P 22

Nr.

P 23

Nr.

P 24 P 25 P 26 P 27 P 28

Nr. Nr. Nr. Nr. Nr.

P 29

P 30

P 31

P 32 P 33 P 34 P 35 P 36 P 37 P 38 P 39 P 40 P 41 P 42 P 43

Supplying & fixing polished brass hinges of 4" x 2 1/2" thickness 4.0mm ± 0.2mm with a weight not less than 265g ± 5g with a smooth surface finish. Supplying & fixing polished brass hinges of 4" x 3" thickness 4.2mm ± 0.2mm with a weight not less than 310g ± 5g with a smooth surface finish. Supplying & fixing polished brass hinges of 5" x 2 1/2" thickness 5.0mm ± 0.2mm with a weight not less than 345g ± 5g with a smooth surface finish. Supplying & fixing polished brass hinges of 5" x 3" thickness 4.3mm ± 0.2mm with a weight not less than 380g ± 5g with a smooth surface finish. Supplying & fixing polished brass barrel bolt of 4" with a weight not less than 210g ± 5g with a smooth surface finish. Supplying & fixing polished brass barrel bolt of 6" with a weight not less than 300g ± 5g with a smooth surface finish. Supplying & fixing polished brass tower bolt of 10" with a weight not less than 345g ± 5g with a smooth surface finish. Supplying & fixing polished brass 1 1/4" dia. Pull ring with a weight not less than 100g ± 5g with a smooth surface finish.
Supplying and fixing mortice lock - Imported Chinese Supplying and fixing Yale mortice lock - (Italy make) Supplying and fixing cupboard door lock - 808 Supplying and fixing magnet lock Supplying and fixing 1" padlock Supplying and fixing 1 1/2" padlock Supplying and fixing 2" padlock Supplying and fixing hasp & staple

Nr.

Nr.

Nr.

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

Q - ROOFING AND CEILING
µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 24

Q 01 Q 02 Q 03 Q 04 Q 05 Q 06

Roof covering with calicut pattern clay tiles. (Timber frame work and ridge covering measured separately) Roof covering with corrugated asbestos sheets. (Timber frame work and ridge covering measured separately) Asbestos close fitting ridges fixed complete with roofing screws or hook bolts. Ridging with calicut pattern tiles bedded in cement, lime & sand mortar 1:1:4 and coloured to match the tiles. One layer of half round tiles over existing corrugated sheets. 3/4" x 6" wide tongued and grooved lunumidella ceiling planks fixed to underside of existing rafters with brass screws including levelling with timber strip where necessary. Asbestos eaves ceiling with approved timber coves & fillets. Under side to existing rafter size of fillet to be 1 1/2" x 1/2" size of cove moulding 2" x 2" Supplying and Fixing finished size 4" x 2" Coconut Rafters. Supplying and Fixing planned finished size 3 1/2 "x1 1/2" Coconut Rafters. DSI TILES ( NIVASI PRODUCT ) Item Q10 - Q14 are using for the laying of DSI (NIVASI Tiles or approved equivalent as per the M/s Samson Rajarata Tiles (pvt)ltd. Manufactures specifications. Timber frame work sizes specified as follows. a) Ridge plate - 45mm x 190mm b) Wall plate - 117mm x 190mm c) Rafters - 45mm x 117mm maximum length 10'-0" @ 18" C/C d) Reepers - 45mm x 25mm @ 10" C/C

Sqr. Sqr. L.ft. L.ft. Sqr. Sqr.

Q 07

Sqr.

Q 08 Q 09

L.ft. L.ft.

Q 10

Roof covering with Natural type main tiles of "Nivasi" or approved equivalent with approx. size 310mm x 310mm and unit weight of 3.1Kg. (Specified Timber frame work and ridge covering measured separately)

Sqr.

Q 11 Q 12 Q 13 Q 14

Ridging with Natural type ridge tiles bedded in cement, sand mortar 1:5 and coloured to match the tiles. Roof covering with Natural type gable left tiles or approved equivalent . Roof covering with Natural type gable right tiles or approved equivalent . Roof covering with Natural type corner tiles or approved equivalent . Flashing

L.ft. L.ft. L.ft. L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 25

Q 15

Aluminium Valley gutter of 3'-0" wide in gauge 24 sheets including 3/4" thk. Ginisapu timber boarding finished with two coats of wood preservative. Aluminium flashing of 1'- 6" wide in gauge 24 sheets including 3/4" thk. Ginisapu timber boarding finished with two coats of wood preservative. Aluminium flashing of 1'-6" wide in gauge 24 sheets, bent to shape and fix to wall. (without timber boarding) G.I. Flashing 20 B.W.G. of 1'6" girth with end laps not less than 6" , turned and tuck up not less 6" in wall and pointed in cement motor 1:2 G.I. Valley gutter of 3'-0" wide in gauge 18 sheets including 3/4" thk. Ginisapu timber boarding including two coats of anti-corrosive paint and wood preservative to sheet and boarding. (Only to be specified when repairing an existing G.I. gutter) Zinc alum flashing (0.47mm thick) and 1'6" wide bent to shape and fixed to wall (without timber coating) Zinc alum Valley gutter of 3'-0" wide in 0.47mm thick sheets including 3/4" thk. Ginisapu timber boarding including wood preservative boarding. Roof Timber Note :

L.ft.

Q 16

L.ft.

Q 17 Q 18

L.ft. L.ft.

Q 19

L.ft.

Q 20 Q 21

L.ft. L.ft.

During the past two years, Divisional Engineers have reported that exact imperial sizes on the timber on following categories are not readily available in the market, unless logs are being purchased and sawn to the exact size. Contractor's Association has also made representation indicating that the imperial size specified in the BSR is not available on imported timber varieties, and due to scarcity of the local timber, small scale Contractors are unable to purchase logs and seasoned the timber and sawn to the imperial sizes. Market survey has confirmed the same. Accordingly, it has been decided to prescribe the cross sectional size roof timber in the following manner to be in par with sectional sizes readily available in the local market, as it may not be worthwhile to prescribe timber sizes and, then request Contractors to buy a large section and reduce it to the required size, since there is no standardization of the timber imports. This has been done to avoid subjective decision taken by the Divisional Engineers during the project implementation phase.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 26

Accordingly, the cross-sectional dimensions in imperial sizes are being now replaced by the following Metric sizes. 1" to be replaced by 22mm 2” to be replaced by 45mm 3” to be replaced by 70mm 4” to be replaced by 94mm 5” to be replaced by 117mm 6” to be replaced by 140mm 7” to be replaced by 165mm 8” to be replaced by 190mm Hence, finished timber will now be prescribed as 2"x 1" as 45mm x 22mm 2”x 2” as 45mm x 45mm 4”x 2” as 94mm x 45mm 5”x 2” as 117mm x 45mm 5”x 3” as 117mm x 70mm 4”x 3” as 94mm x 70mm 6”x 2” as 140mm x 45mm 6”x 3” as 140mm x 70mm 6”x 4” as 140mm x 94mm 7”x 2” as 165mm x 45mm 190mm x 94mm

8”x 4” as

Refer preamble note for approved timber species. The rate for timber items will remain same irrespective of timber species. All Timber should be treated at an approved kiln. Rate for Timber preservation be paid separately as per Item No:Q37. Q 22 Roofing with calicut pattern tiles on local Micro (Eucalyptus Microcoris) or Balau , Bitis or Kempas timber frame work complete with ridge hips etc. comprising of 165mm x 45mm ridge plate , 94mm x 70mm wall plate , 94mm x 45mm rafters @ 18" c/c and 45mm x 22mm reepers @ 12" c/c. Rate shall include for applying two coats of wood preservative. Roofing with asbestos corrugated sheets on local Micro (Eucalyptus Microcoris) or Balau , Bitis, or Kempas timber frame work (Ridging measured separately).Comprising of 165mm x 45mm ridge plate , 94mm x 70mm wall plate , 94mm x 45mm rafters @ 30" c/c and 45mm x 45mm battens @ 3'-0" c/c.Rate shall include for applying two coats of wood preservative. Sqr.

Q 23

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 27

Q 24

Supply and installation of Zn/Alum profile sheets of total thickness 0.47mm , fixed to the roof timber frame work comprising of 140mm x 45mm hip rafters/valley rafters, 94mm x 70mm wall plates, 117mm x 94mm purling , 94mm x 45mm rafters @ 2'-0" spacing and 45mm x 22mm reepers @ 3'-6" spacing including ridge capping , end capping and other accessories required to complete the roof to working order. (Ceiling and thermal installation measured separately.) Rate shall include for routing , planning and sand papering hip/valley rafters, purlings and rafters and application of water based stain and two coats of water based sealants. Rate shall include for applying of two coats wood preservative. Asbestos flat ceiling fixed with coves & fillets to local Micro (Eucalyptus Microcoris) or Balau , Bitis or Kempas timber frame work of 94mm x 45mm @ 4' - 0" c/c , 45mm x 45mm @ 2' - 0" c/c, fillet size to be 1 1/2" x 1/2" and cove moulding size to be 2" x 2". Rate shall include for applying two coats of wood preservative. Asbestos flat eaves ceiling fixed with coves and fillets to local Micro (Eucalyptus Microcoris) timber work. or Balau , Bitis or Kempas. Fillet size to be 1 1/2" x 1/2" cove moulding size to be 2" x 2". Rate shall include for applying two coats of wood preservative. 3/4" thick x 6" wide tongued and grooved lunumidella ceiling planks fixed flat on 94mm x 45mm local Micro (Eucalyptus Microcoris) or Balau , Bitis or Kempas. And timber joist at every 2' - 0" c/c. cove moulding size to be 2" x 2". Rate shall include for applying two coats of wood preservative. Supply and fixing of tongued and grooved 3/4"x 6" lunumidella ceiling planks on top of existing rafters , with double sided aluminium foil fixed on top. Rate shall include for sand papering and smoothing one side of the planks , application of water based staining and two coats of water based sealant. Rate shall include for applying two coats of wood preservative. Supplying and fixing 190mm x 94mm , 165mm x 45mm , 140mm x 94mm , 140mm x 70mm , 140mm x 45mm , 117mm x 190mm and 45mm x 190mm local micro or Balau , Kempas or Bitis timber purling , hip/valley rafters etc. with applying two coats of wood preservative. Supplying and fixing 117mm x 70mm purling up to 12'-0" length Balau, Kempas , Micro. with applying two coats of wood preservative. Supplying and fixing 94mm x 70mm wall plates up to 12'-0" length, Balue, Kempas, Micro. with applying two coats of wood preservative.

Sqr.

Q 25

Sqr.

Q 26

Sqr.

Q 27

Sqr.

Q 28

Sqr.

Q 29

Cu.ft.

Q 30

L.ft.

Q 31

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 28

Q 32

Supplying and fixing 117mm x 70mm , 117mm x 45mm , 94mm x 70mm local Micro (Eucalyptus Microcoris) Balau , Bitis ,Kempas timber purling, wall plates, rafters etc. with applying two coats of wood preservative. Supplying and fixing 94mm x 45mm local Micro (Eucalyptus Microcoris) or Balau Kempas or Bitis timber purling, rafters etc. with applying two coats of wood preservative. Supplying and fixing 45mm x 45mm local Micro (Eucalyptus Microcoris) or Balau, Kempas or Bitis timber bearers. with applying two coats of wood preservative. Supplying and fixing 45mm x 22mmlocal micro (Eucalyptus Microcoris)or Balau, Kempas or Bitis. timber reapers with applying two coats of wood preservative. Timber valance/barge board in GINISAPU timber finished size 9" x 3/4" thick fixed to roof frame with brass screws including and application two coats of wood preservative. Treating of timber by vacuum pressure impregnation technique from an approved kiln treatment plant "Finlays Rentokil Ceylon (Pvt) Ltd." or any other Approved company. Rate shall include transport charges. Applying two coats of wood preservative (Clear) to wood work. Supply and fixing 20mm x 6mm x 12" long flat iron bracket for fixing valance board/barge board. Rate shall include for two coats of anticorrosive paint. Test

Cu.ft.

Q 33

L.ft.

Q 34

L.ft.

Q 35

L.ft.

Q 36

L.ft.

Q 37

Cu.ft.

Q 38 Q 39

Sqr. Nr.

Q 40

Testing of a timber sample for identification from the Timber corporation laboratory.

Per Test

R - GUTTERS AND DOWN PIPES
R 01 P.V.C. eaves gutter 4 1/2" square type fixed to valance board with P.V.C. brackets @ 1' - 6" c/c including necessary mitre joints , gutter joiners , running heads & end caps. P.V.C. down pipes 3 1/2" dia. fixed to wall with P.V.C. clips @ 4'-0" c/c including necessary sockets, bends, elbows. L.ft.

R 02

L.ft.

S - SANITARY FITTINGS
Note : In view of the variety of sanitary ware and fittings available in the market, it has become necessary to prescribe the exact quality requirements in terms of performance and durability aspects. The "Rocell & American Standard" brands and respective model numbers have been chosen as a bench mark to establish the said requirements.

1

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 29

2

The brand name and model number appearing in the respective BSR items are purely meant to describe the performance standard of the said fitting/item and does not imply in any manner that only the "Rocell & American Standard" brands are recommended or considered to be restricted to the "Rocell & American Standard" brands. Any other make/brand that has equivalent performance characteristics are considered as equivalent provided such fittings met with following criteria. Has an authorized local agent in Sri Lanka The local agent has been in the trade of the offered make for not less than 5 years. The offered sanitary fittings has a 10 Year manufacturer's warranty issued by the agent. The cistern mechanism shall have an assurance for the availability of spares for the next 3 years. The fittings are manufactured in conformity to BS, JIS, A.S.T.M., A.S. or S.L.S. standards. The dimensions and performance characteristics are in par with the stated model. The brands that may be considered as equivalent are "Ideal" brand, or "Twyford" brand or any other approved make for which prior approval to be obtained. In case where wash basin outlet directly falls on to an open drain, the bottle trap may be omitted. For wash basins fixed on open areas plastic tap of item T 01 be specified. Normal Range Supply and fix white vitreous china floor standing wash basin and pedestal with overflow hole and single tap hole in center of "Rocell" brand & model "Urban D" or approved equivalent complete to working order inclusive of the 1 1/4" chromium plated waste outlet of "Rocell" brand & model "A706" and 1 1/4" chromium plated siphon cleanable bottle trap of "Rocell" brand & model "A186".

3

(a) (b) (c) (d) (e) (f)

4

5 (a) 5 (b)

S 01

Nr.

S 02

Supply and fix white vitreous china floor standing close coupled semi back to wall water closet suite with wash down flushing with 6/3 liters dual flushing having horizontal outlet with Universal drain bend and two lateral holes for bottom water connection , cistern with water inlet from rear of "Rocell" brand & model "Urban D" or approved equivalent complete to working order inclusive of universal bend of "Rocell" brand & model "Vario Joint".

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 30

S 03

Supply and fix Chromium plated piller tap for wash basin only cold water of "American Standard" brand model No. 4604.415.50 or approved equivalent. Supply and fix Chromium plated single lever wash basin mixer tap without pop-up waste with connection flex of "Rocell" brand model No.Duca - 16495 or approved equivalent with 5 year written warranty from the authorized agent. Semi - Luxury Range Supply and fix white vitreous china floor standing wash basin and pedestal with overflow hole and single tap hole in center of "Rocell" brand & model "Dune" or approved equivalent complete to working order inclusive of the 1 1/4" chromium plated waste outlet of "Rocell" brand & model "A706" and 1 1/4" chromium plated siphon cleanable bottle trap of "Rocell" brand & model "A186". Supply and fix white vitreous china floor standing close coupled semi back to wall water closet suite with wash down flushing with 6/3 liters dual flushing having horizontal outlet with Universal drain bend and two lateral holes for bottom water connection , cistern with water inlet from rear of "Rocell" brand & model "Dune" or approved equivalent complete to working order inclusive of universal bend of "Rocell" brand & model "Vario Joint". Luxury Range Supply and fix white vitreous china floor standing wash basin and pedestal with overflow hole and single tap hole in center of "Rocell" brand & model "Intense" or approved equivalent complete to working order inclusive of the 1 1/4" chromium plated waste outlet of "Rocell" brand & model "A706" and 1 1/4" chromium plated siphon cleanable bottle trap of "Rocell" brand & model "A186".

Nr.

S 04

Nr.

S 05

Nr.

S 06

Nr.

S 07

Nr.

S 08

Supply and fix white vitreous china floor standing close coupled semi back to wall water closet suite with wash down flushing with 6/3 liters dual flushing having horizontal outlet with Universal drain bend and two lateral holes for bottom water connection , cistern with water inlet from rear of "Rocell" brand & model "Intense" or approved equivalent complete to working order inclusive of universal bend of "Rocell" brand & model "Vario Joint". Supply and fix white vitreous china floor standing Bidet with overflow hole of "Rocell" brand & model "Intense" or approved equivalent complete to working order. Supply and fix Chromium plated piller tap for wash basin only cold water of "American Standard" brand model No.A-1500N or approved equivalent.

Nr.

S 09

Nr.

S 10

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 31

S 11

Supply and fix Chromium plated single lever wash basin mixer tap with pop-up waste with connection flex of "Rocell" brand model No. Sprint 29500 or approved equivalent with 5 year written warranty from the authorized agent. Other Fittings for Normal / Semi-Luxury / Luxury

Nr.

S 12

Supply and fix wall hung wash basin with half pedestal and single tap hole in center of "Rocell" brand model No."Dew Point" or approved equivalent complete to working order. Supply and fix wall hung ceramic corner wash basin of "American Standard " brand, model New Codie TF 0940 or approved equivalent complete to working order. Rate inclusive of brackets and connection to pipe line, but without tap and bottle trap. Supply and installation of vanity type wash basin of "American Standard " brand, model Ceros - TF0477 with A-8006 waste & plug or approved equivalent. On concrete vanity slab finished with 3/4" thick approved polished granite tile in black colour. ( Vanity top concrete slab & Granite tile laying measured separately.) Supply and fix squatting pan with foot rest of "Rocell" brand model No. SP3F013 or approved equivalent. Supply and fix low level plastic cistern for squatting pan of "Rocell" brand or approved equivalent including connecting pipe between tank and squatting pan. Supply and fix ceramic urinal with flush valve of "Rocell" brand model DP70013 or approved equivalent complete to working order. Supply and fix Chromium plated 1 1/4" dia.siphon cleanable bottle trap of "Rocell" brand model No.A186 or approved equivalent. Supply and fix Chromium plated 1/2" dia. angle valve brass fitting with zinc head of "Rocell" brand model No.A280 or approved equivalent. Supply and fix hand held chromium plated bidet spray of "American Standard " brand model A4700 or approved equivalent. Supply and fix Chromium plated 4 function shower head of "American Standard" brand model No. A-6080 with shower arm of "American Standard" brand model No. A-6110-974-845 & concealed valve of "American Standard" brand model No. A-7002C-B JAZZ or approved equivalent for cold water. Supply and fix Chromium plated hand shower of "American Standard" brand model No. A-2003-A-MR with adjustable shower rod with soap tray of "American Standard" brand model No. Viola 11 - A-6110-978777 & angle valve of "American Standard" brand model No. 9113.005.50 or approved equivalent for cold water.

Nr.

S 13

Nr.

S 14

Nr.

S 15 S 16

Nr. Nr.

S 17

Nr.

S 18

Nr.

S 19

Nr.

S 20

Nr.

S 21

Nr.

S 22

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 32

S 23

Supply and fix Chromium plated shower level built-in-shower mixer with auto diverter shower arm jointed shower head of "Rocell" brand model No. Pony Z - Z6955 or approved equivalent. Supply and fix Chromium plated shower mixer of "American Standard" brand model No. Saga - 1512.701.50 with adjustable shower rod of "American Standard" brand model No. Viola 11 - A-6110-978-777 or approved equivalent. Supply and fix laboratory sink approved by the Engineer ( 20" x 14" x 7 1/2"). Supply and fix brass chromium plated elbow operated pillar tap for the operating theatres of "American Standard " brand, model ML30 or approved equivalent. Supply and fix automatic hand dryer of "American Standard " brand, model Kingsway - HK1800PA or approved equivalent including electrical connection. Supply and fix 5mm thick mirror of size 18" x 24" double coated with pencil edge back stretcher. Bathroom Accessories

Nr.

S 24

Nr.

S 25 S 26

Nr. Nr.

S 27

Nr.

S 28

Nr.

S 29

Supply and fix chromium plated Soap Basket of "Rocell" brand & model "Charming" or approved equivalent. (Normal & Semi-luxury range ) Supply and fix chromium plated brass body and glass Soap Dish of "Rocell" brand & model "Charming" - DP 6703 or approved equivalent. ( Luxury range ) Supply and fix chromium plated brass body and glass Tumbler Holder of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated Towel Ring of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated Robe Hook of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated Toilet Paper Holder of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated Toilet Cup Holder of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated 600mm long Single Towel Bar of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated 600mm long Double Towel Bars of "Rocell" brand & model "Charming" or approved equivalent. Supply and fix chromium plated 600mm long Towel Rack of "Rocell" brand & model "Charming" or approved equivalent.

Nr.

S 30

Nr.

S 31

Nr.

S 32 S 33 S 34 S 35 S 36

Nr. Nr. Nr. Nr. Nr.

S 37

Nr.

S 38

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 33

S 39

Supply and fix chromium plated brass body 450mm long Glass Shelf of "Rocell" brand & model "Charming" or approved equivalent.

Nr.

Disable Fittings & Accessories S 40 Supply and fix ceramic wall hung wash basin for disabled of "American Standard " brand, model Kimera - TF995 with waste & plug A-8006 or approved equivalent. Supply and fix white ceramic water closet suite for the disabled of "American Standard" brand & model Ventura - 3200.001.09 , Cygnet tank - PP.4041.020.03C and Seat and cover - 390000N or approved equivalent complete to working order. Supply and fix hand grip rails for disabled of "American Standard " brand, model Me-tu -MTJT26 or approved equivalent. Supply and fix grip bar for disabled of "American Standard " brand, model Apex - AR-065-18 S/S or approved equivalent. Supply and fix hand grip-shower angle for disabled of "American Standard " brand, model Me-tu - MTJT22-5 or approved equivalent. Supply and fix hand grip-shower for disabled of "American Standard " brand, model Me-tu - MTJT22-10 or approved equivalent. Indian & Malaysian Origins S 46 S 47 S 48 Supply and fix footrest squatting pan and trap including laying flush pipe laid on concrete base. (Indian Origin) Supply and fix ceramic urinal bowl with trap fixed to wall as directed with inlet and outlet connection. (Indian Origin ) Supply and fix wash basin with pedestal model no.BSWBA 620x470 VCP - manufactured by Mascon or equivalent complete to work in order. Rate without pillar tap & bottle trap. Supply and fix wall hung corner wash basin model no.BSWBA16x16CC manufactured by Mascon or equivalent complete to work in order. Rate inclusive of brackets and connection to pipe line, but without pillar tap & bottle trap. Supply and fix wash basin only with steel brackets including 1/2" angle valve and 1/2" pillar tap marketed by M/s. "Rajabdeen" or approved equivalent. ( Indian Origin ) Supply and fix low level water closet with cistern of Indian Origin with angle valve, "P" or "S" trap, all complete to working order. ( Indian Origin ) High-level plastic cistern supplied and fixed to wall rawl plug & screws complete with P.V.C. flush pipe, stop cock, water supply connection etc. (Malaysian make) Nr. Nr. Nr. Nr.

S 41

Nr.

S 42

Nr.

S 43 S 44

Nr. Nr.

S 45

Nr.

S 49

Nr.

S 50

Nr.

S 51

Nr.

S 52

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 34

S 53

Supply and fix 36" x 18" stainless steel kitchen sink with single bowl & single drain of "Sealcore" by mascons or approved equivalent with 5 year written warranty from the authorized agent. including PVC bottle trap and water connection with flexible hose, all complete to working order. ( Swan neck tap paid separately.) Supply and fix 17" x 18" stainless steel kitchen sink with single bowl of "Sealcore" by mascons or approved equivalent with 5 year written warranty from the authorized agent. including PVC bottle trap and water connection with flexible hose, all complete to working order. ( Swan neck tap paid separately.) Supplying and fixing 1 1/4" (40 mm) dia. PVC Bottle Trap. (Malaysian make ) Shower rose chromium plated 4" dia. Fixed vertically with 1/2" valve socket to existing pipe including water connection. Supply and fixing plastic commode seat cover Mirror bevelled rectangular 20"x 15" with hard wood back 3/4" thickness finished with 2 coats of enamel paint. Aluminium clips and key hole hanging plate including glass shelves. Supply and fix Nickel plated Soap Tray Supply and fixNickle plated Single Towel Bar

Nr.

S 54

Nr.

S 55 S 56 S 57 S 58

Nr. Nr.

Nr. Nr.

S 59 S 60

Nr. Nr.

T - PLUMBING ACCESSORIES
"Water - Tec" Brand or Approved Equivalent Fittings 12 ) T 01 T 02 T 03 T 04 T 05 T 06 (T0-T Nr. Nr. Nr. Nr. Nr. Nr.

Supplying and fixing 1/2" Bib tap of "Water Tec" brand & model no.6872 or approved equivalent. Supplying and fixing 1/2" Angle valve of "Water Tec" brand & model no.14548 or approved equivalent. Supplying and fixing 1/2" Pillar Sink tap (Swan-neck tap) of "Water Tec" brand & model no.14527 or approved equivalent. Supplying and fixing 1/2" Wall Sink tap of "Water Tec" "Water Tec" brand & model no.14516 or approved equivalent. Supplying and fixing Health foucet (Bidet Spray) of "Water Tec" brand & model no.10107 or approved equivalent. Supplying and fixing Shower rose of "Water Tec" brand & model no.6814 or approved equivalent. "Plumber" Brand or Approved Equivalent Fittings T17 ) ( T 13 -

T 07

Supply and fixing 1/2" dia. chromium plated Concealed stop cock of "Plumber" brand & model no: NCE-0405 or approved equivalent.

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 35

T 08 T 09

Supply and fixing 1/2" dia. chromium plated Angle cock of "Plumber" brand & model no: NCE-0507 or approved equivalent. Supply and fixing 1/2" dia. chromium plated Pillar cock , foam flow of "Plumber" brand & model no : NCE-0101 or approved equivalent. Supply and fixing 1/2" dia. chromium plated Bib cock , foam flow of "Plumber" brand & model no : NCE-0202 or approved equivalent. Supply and fixing 1/2" dia. chromium plated Sink cock with swivel spout deck mounted, foam flow of "Plumber" brand & model no : NCE0104 or approved equivalent. (Swan-neck Type) "Pegler" Brand or Approved Equivalent Fittings T 13 -T23 ) (

Nr. Nr.

T 10

Nr.

T 11

Nr.

T 12 T 13 T 14 T 15 T 16 T 17 T 18 T 19 T 20 T 21 T 22 T 23

Supplying and fixing 1" wheel valve "Pegler" Brand or approved equivalent. Supplying and fixing 1 1/4" wheel valve "Pegler" Brand or approved equivalent. Supplying and fixing 1 1/2" wheel valve "Pegler" Brand or approved equivalent. Supplying and fixing 2" wheel valve "Pegler" Brand or approved equivalent. Supply and fixing 1/2" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 3/4" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 1" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 1 1/4" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 1 1/2" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 2" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 3" dia Brass Ball valve "Pegler" Brand or approved equivalent. Supply and fixing 4" dia Brass Ball valve "Pegler" Brand or approved equivalent. Brass Fittings

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

T 24 T 25 T 26 T 27 T 28 T 29

Supplying and fixing 1/2" stop cock. Supplying and fixing 3/4" stop cock. Supplying and fixing 1/2" Handle valve Supplying and fixing 3/4" Handle valve Supply and fixing 1/2" dia flexible hose - 12" length. Supply and fixing 1/2" dia flexible hose - 18" length.

Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 36

PVC Fittings T 30 T 31 T 32 T 33 T 34 T 35 T 36 T 37 T 38 T 39 Supply and fixing 1/2" dia PVC Compact Ball valve. Supply and fixing 3/4" dia PVC Compact Ball valve. Supply and fixing 1" dia PVC Compact Ball valve. Supply and fixing 1 1/4" dia PVC Compact Ball valve. Supply and fixing 1 1/2" dia PVC Compact Ball valve. Supply and fixing 2" dia PVC Compact Ball valve. Supply and fixing 3" dia PVC Compact Ball valve. Supply and fixing 1/2" dia PVC Union. Supply and fixing 1" dia PVC Union. Water Tanks Supplying and installing "Plastishell" or any other water tank 500 Ltr. capacity (fittings paid separately) at an average height of 12'-0". Tank shall have a 5 year warranty from the manufacture. Supplying and installing "Plastishell" or any other water tank 1000 Ltr. capacity (fittings paid separately) at an average height of 12'-0". Tank shall have a 5 year warranty from the manufacture. Supplying and installing 2000 ltr. "Plastishell" or any other water tank at average 12 ft. height including transporting and hoisting in position Tank shall have a 5 year warranty from the manufacture. Supplying and installing 5000 ltr. "Plastishell" or any other water tank at average 12 ft. height including transporting and hoisting in position Tank shall have a 5 year warranty from the manufacture. P.V.C. PIPES All P.V.C. pipes should confirm to S.L.S. 147 Water Supply Pipes. T 43 T 44 T 45 T 46 T 47 T 48 Supplying laying and/or fixing 1/2" dia. P.V.C. pipes (Specials paid separately). Supplying laying and/or fixing 3/4" dia. P.V.C. pipes (Specials paid separately). Type 1000 Type 1000 L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

T 40

Nr.

T 41

Nr.

T 42

Nr.

Supplying laying and/or fixing 1" dia. P.V.C. pipes Type 1000 (Specials paid separately). Supplying laying and/or fixing 1 1/4" dia. P.V.C. pipes Type 1000 (Specials paid separately). Supplying laying and/or fixing 1 1/2" dia. P.V.C. pipes Type 1000 (Specials paid separately). Supplying laying and/or fixing 2" dia. P.V.C. pipes Type 1000 (Specials paid separately). Waste Water Pipes.

T 49 T 50

Supplying and Fixing 1 1/4" dia P.V.C. waste pipe (type 600) Supplying and fixing 1 1/2" dia P.V.C. waste pipe (type 600)

L.ft. L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 37

T 51 T 52

Supplying and fixing 2" dia. P.V.C waste pipe (type 600) Supplying and fixing 4" dia. P.V.C waste pipe (type 600) Sewer Pipes.

L.ft. L.ft.

T 53

Supplying and laying 4" dia.P.V.C. sewer pipes (type 600) Including cement concrete surrounding 1:3:6: ( 1") as per Drg. No:- WSS 270 Type I . Excavation paid separately. Supplying and laying 6" dia.P.V.C. sewer pipes (type 600) Including cement concrete surrounding 1:3:6: ( 1") as per Drg. No:- WSS 270 Type II . Excavation paid separately. Supplying and laying 4" dia.P.V.C. sewer pipes (type 600) fixed to wall and floor slab with clips. Supplying and laying 6" dia. P.V.C. sewer pipes (type 600) fixed to wall and floor slab with clips. Supplying and laying 4" dia. P.V.C. perforated pipes (type 600) with 10mm dia. Holes @ 3" c/c as per details. Necessary excavation & rubble packing paid separately. P.V.C. Specials.

L.ft.

T 54

L.ft.

T 55 T 56 T 57

L.ft. L.ft. L.ft.

T 58 T 59 T 60 T 61 T 62 T 63 T 64 T 65 T 66 T 67 T 68 T 69 T 70 T 71 T 72 T 73 T 74 T 75 T 76 T 77 T 78

Supplying and fixing 1/2" dia PVC Socket Supplying and fixing 1/2" dia. PVC Valve Socket Supplying and fixing 1/2" dia. PVC Faucet Socket Supplying and fixing 1/2" dia. PVC Elbow Supplying and fixing 1/2" dia. PVC Bend Supplying and fixing 1/2" dia. PVC Equal Tee Supplying and fixing 1/2" dia. PVC Clips Supplying and fixing 3/4" dia PVC Socket Supplying and fixing 3/4" dia. PVC Valve Socket Supplying and fixing 3/4" dia. PVC Faucet Socket Supplying and fixing 3/4" dia. PVC Elbow Supplying and fixing 3/4" dia. PVC Bend Supplying and fixing 3/4" dia. PVC Equal Tee Supplying and fixing 3/4" dia. PVC Clips Supplying and fixing 1" dia PVC Socket Supplying and fixing 1" dia. PVC Valve Socket Supplying and fixing 1" dia. PVC Faucet Socket Supplying and fixing 1" dia. PVC Elbow Supplying and fixing 1" dia. PVC Bend Supplying and fixing 1" dia. PVC Equal Tee Supplying and fixing 1" dia. PVC Clips

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 38

T 79 T 80 T 81 T 82 T 83 T 84 T 85 T 86 T 87 T 88 T 89 T 90 T 91 T 92 T 93 T 94 T 95 T 96 T 97 T 98 T 99 T 100 T 101 T 102 T 103 T 104 T 105 T 106 T 107 T 108 T 109 T 110 T 111 T 112

Supplying and fixing 1 1/4" dia PVC Socket Supplying and fixing 1 1/4" dia. PVC Valve Socket Supplying and fixing 1 1/4" dia. PVC Faucet Socket Supplying and fixing 1 1/4" dia. PVC Elbow Supplying and fixing 1 1/4" dia. PVC Bend Supplying and fixing 1 1/4" dia. PVC Equal Tee Supplying and fixing 1 1/4" dia. PVC Clips Supplying and fixing 1 1/2" dia PVC Socket Supplying and fixing 1 1/2" dia. PVC Valve Socket Supplying and fixing 1 1/2" dia. PVC Faucet Socket Supplying and fixing 1 1/2" dia. PVC Elbow Supplying and fixing 1 1/2" dia. PVC Bend Supplying and fixing 1 1/2" dia. PVC Equal Tee Supplying and fixing 1 1/2" dia. PVC Clips Supplying and fixing 2" dia PVC Socket Supplying and fixing 2" dia. PVC Valve Socket Supplying and fixing 2" dia. PVC Faucet Socket Supplying and fixing 2" dia. PVC Elbow Supplying and fixing 2" dia. PVC Bend Supplying and fixing 2" dia. PVC Equal Tee Supplying and fixing 2" dia. PVC Clips Supplying and fixing 2 1/2" dia PVC Socket Supplying and fixing 2 1/2" dia. PVC Valve Socket Supplying and fixing 2 1/2" dia. PVC Faucet Socket Supplying and fixing 2 1/2" dia. PVC Elbow Supplying and fixing 2 1/2" dia. PVC Bend Supplying and fixing 2 1/2" dia. PVC Equal Tee Supplying and fixing 2 1/2" dia. PVC Clips Supplying and fixing 3" dia PVC Socket Supplying and fixing 3" dia. PVC Valve Socket Supplying and fixing 3" dia. PVC Faucet Socket Supplying and fixing 3" dia. PVC Elbow Supplying and fixing 3" dia. PVC Bend Supplying and fixing 3" dia. PVC Equal Tee

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 39

T 113 T 114 T 115 T 116 T 117 T 118 T 119 T 120 T 121 T 122 T 123 T 124 T 125 T 126 T 127 T 128 T 129 T 130 T 131 T 132 T 133 T 134 T 135 T 136 T 137 T 138 T 139 T 140 T 141 T 142 T 143 T 144 T 145

Supplying and fixing 3" dia. PVC Clips Supplying and fixing 2" - 1 1/2" dia. PVC. Reducing Socket Supplying and fixing 2" - 1 1/4" dia. PVC. Reducing Socket Supplying and fixing 2" - 1" 1/2 dia. PVC. Reducing Socket Supplying and fixing 2" - 3/4" 2 dia. PVC. Reducing Socket Supplying and fixing 2" - 1/2" 2 dia. PVC. Reducing Socket Supplying and fixing 1 1/2" - 1 1/4" dia. PVC. Reducing Socket Supplying and fixing 1 1/2" - 1" 1/2 dia. PVC. Reducing Socket Supplying and fixing 1 1/2" - 3/4" 2 dia. PVC. Reducing Socket Supplying and fixing 1 1/2" - 1/2" 2 dia. PVC. Reducing Socket Supplying and fixing 1 1/4" - 1" 1/2 dia. PVC. Reducing Socket Supplying and fixing 1 1/4" - 3/4" 2 dia. PVC. Reducing Socket Supplying and fixing 1 1/4" - 1/2" 2 dia. PVC. Reducing Socket Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Socket Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Socket Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Socket Supplying and fixing 2" - 1 1/2" dia. PVC. Reducing Tee. Supplying and fixing 2" - 1 1/4" dia. PVC. Reducing Tee. Supplying and fixing 2" - 1" 1/2 dia. PVC. Reducing Tee. Supplying and fixing 2" - 3/4" 2 dia. PVC. Reducing Tee. Supplying and fixing 2" - 1/2" 2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/2" - 1 1/4" dia. PVC. Reducing Tee. Supplying and fixing 1 1/2" - 1" 1/2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/2" - 3/4" 2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/2" - 1/2" 2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/4" - 1" 1/2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/4" - 3/4" 2 dia. PVC. Reducing Tee. Supplying and fixing 1 1/4" - 1/2" 2 dia. PVC. Reducing Tee. Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Tee. Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Tee. Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Tee. Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Foucet Tee. Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Foucet Tee.

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 40

T 146 T 147 T 148 T 149

Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Foucet Tee. Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Elbow. Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Elbow. Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Elbow. Special Pipe fittings All Special Pipe fittings should be "Anton" / "Slon" Brand or approved equivalent.

Nr. Nr. Nr. Nr.

T 150 T 151 T 152 T 153 T 154 T 155 T 156 T 157 T 158 T 159 T 160 T 161 T 162 T 163 T 164 T 165 T 166 T 167 T 168 T 169

Supplying and fixing 4" (110 mm) dia. Double access branch with cleaning eye. Supplying and fixing 4" (110 mm) dia Single access branch with cleaning eye. Supplying and fixing 4" (110 mm) dia single branch. Supplying and fixing 4" (110 mm) dia Swept bend with cleaning eye. Supplying and fixing 4" (110 mm) dia Swept bend. Supplying and fixing 4" (110 mm) dia Swept tee with cleaning eye. Supplying and fixing 4" (110 mm) dia Swept tee. Supplying and fixing 4" (110 mm) dia " P " trap. Supplying and fixing 4" (110 mm) dia " S " trap. Supplying and fixing 4" (110 mm) Multi floor trap (Catch pit). Supplying and fixing 4" (110 mm) dia Tee with cleaning eye. Supplying and fixing 4" (110 mm) dia. Bend. Supplying and fixing 6" (160mm) dia. Bend. Supplying and fixing Reducing Tee 6" x 4" (160mm x 110mm) Supplying and fixing 2" (63 mm)dia. Vent Cowl (Wire Dome) Supplying and fixing 4" (110mm) dia. Vent Cowl (Wire Dome) Supplying and fixing 1 1/2" (50 mm) dia Swept tee with cleaning eye. Supplying and fixing 1 1/2" (50 mm) dia Swept tee. Supplying and fixing 1 1/2" (50 mm) dia Equal tee. Supplying and fixing 1 1/2" (50 mm) dia Bend with cleaning eye. Hot water Pipes & Fittings

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

T 170 T 171

Supplying , laying and/or fixing 1/2" dia. CPVC - SDR pipes. (Specials paid separately). Supplying , laying and/or fixing 1" dia. CPVC - SDR pipes. (Specials paid separately).

L.ft. L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 41

T 172 T 173 T 174 T 175 T 176 T 177 T 178 T 179 T 180 T 181 T 182 T 183 T 184 T 185 T 186 T 187 T 188 T 189 T 190 T 191 T 192 T 193 T 194

Supplying and fixing 1/2" dia. CPVC Socket. Supplying and fixing 1" dia. CPVC Socket. Supplying and fixing 1/2" dia. CPVC Valve Socket. Supplying and fixing 1" dia. CPVC Valve Socket. Supplying and fixing 1/2" dia. CPVC Faucet Socket. Supplying and fixing 1" dia. CPVC Faucet Socket. Supplying and fixing 1/2" dia. CPVC Tee. Supplying and fixing 1" dia. CPVC Tee. Supplying and fixing CPVC Elbow 1/2" x 45o Supplying and fixing CPVC Elbow 1/2" x 90o Supplying and fixing CPVC Elbow 1" x 45o Supplying and fixing CPVC Elbow 1" x 90o Supplying and fixing CPVC Reducing Socket 1" x 1/2" Supplying and fixing CPVC Reducing Tee 1" x 1/2" Supplying and fixing 1/2" dia. CPVC End Cap. Supplying and fixing 1" dia. CPVC End Cap. Supplying and fixing 1/2" dia. CPVC Tap End Plug. Supplying and fixing 1/2" dia. CPVC Union. Supplying and fixing 1/2" dia. CPVC Elbow Holder. Supplying and fixing 1" dia. CPVC Elbow Holder. Supplying and fixing 1/2" dia. CPVC Brass Male Adapter. Supplying and fixing 1/2" dia. CPVC Brass Female Adapter. Supplying and fixing 1/2" dia. CPVC Brass Elbow.

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 42

Pumps & Accessories T 195 Supplying and fixing water pump single phase manufactured by " Jinasena" Model no:- N110T/1 ,size 1" x 1" , 0.75 H.P. , total head 80'0" , out put 1000 I.g/hr. as per manufacturer's specifications. Rate include for fixing 1" dia. Foot valve approved make, Positioning and mount the pump on a concrete bed 9" x 9" x 3" thick in 1:2:4(3/4") with 10mm dia. hexagonal bolts to required length , Nuts & Washers 1/16" thick complete in working order using necessary P.V.C. pipes, specials...etc. & electrical supply from the closest DB. Pipes , specials & electricity connection paid separately. Supplying and fixing 1" Deep Well Kit by " Jinasena" Model no:- Type A as per manufacturer's specifications and complete in working order using necessary P.V.C. pipes, specials...etc. & electrical supply from the closest DB. (Pipes , specials & electricity connection paid separately.) Test T 197 T 198 Water Pressure testing for PVC pipes. Testing of Water tanks & Sumps as per clause 3.8.6 of SCA/4/11 Item Item Nr.

T 196

Nr.

U - DRAINAGE Waste Water Manhole - Brick
U 01 Construction of waste water brick manhole internal size of 1'0" x 1'-0" & depth up to 1'-3", consist of 3" thick Grade 15 concrete base and 4 1/2" thick brick masonry side walls in 1:3 cement sand mix , 1/2" thick cement rendering in 1:2 to internal & external exposed faces of walls finished smooth with neat cement floating, with 2" thick Grade 20 RCC cover slab with 6mm dia. M.S. rods @ 4" c/c both ways. Rate to include for excavation, necessary formwork , lifting hooks & 3" thick concrete pad as per Drawing No:-WSS/10/01 Construction of waste water brick manhole internal size of 1'-3" x 1'-3" & depth up to 2'-0", consist of 3" thick Grade 15 concrete base and 4 1/2" thick brick masonry side walls in 1:3 cement sand mix , 1/2" thick cement rendering in 1:2 to internal & external exposed surfaces of walls finished smooth with neat cement floating, with 2" thick Grade 20 RCC cover slab with 6mm dia. M.S. rods @ 4" c/c both ways. Rate to include for excavation, necessary formwork , lifting hooks & 3" thick concrete pad as per Drawing No:- WSS/10/01 Nr.

U 02

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 43

U 03

Construction of waste water brick manhole internal size of 1'6" x 1'-6" & depth 2'-0"to 3'-0", consist of 3" thick Grade 15 concrete base and 4 1/2" thick brick masonry side walls in 1:3 cement sand mix , 1/2" thick cement rendering in 1:2 to internal & external exposed surfaces of walls finished smooth with neat cement floating, with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks & 6" thick concrete pad as per Drawing No:-WSS/10/01 Construction of waste water brick manhole internal size of 2'0" x 2'-0" & depth vary from 2'-0"-3'-0", consist of 4" thick Grade 15 concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,1/2" thick cement sand rendering in 1:2 to all internal surfaces and external exposed surfaces of walls finished smooth with neat cement floating , with 3" thick Grade 20 RCC cover slab with 10mm dia. tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 6" thick concrete pad as per Drawing No:WSS/10/01

Nr.

U 04

Nr.

Waste Water Manhole - Concrete
U 05 Construction of waste water concrete manhole internal size of 1'0" x 1'-0" & depth up to 1'-3", consist of 4" thick Grade 20 concrete base and sides ,with 2" thick Grade 20 RCC cover slab with 6mm dia.M.S. rods @ 4" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces as per Drawing No:-WSS/10/02 Nr.

U 06

Construction of waste water concrete manhole internal size of 1'-3" x 1'-3" & depth up to 2'-0", consist of 4" thick Grade 20 concrete base and sides ,with 2" thick Grade 20 RCC cover slab with 6mm dia.M.S. rods @ 4" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces as per Drawing No:-WSS/10/02

Nr.

U 07

Construction of waste water concrete manhole internal size of 1'-6" x 1'-6" & depth vary from 2'-0' - 3'-0", consist of 3" thick Grade15 lean concrete & 5" thick Grade 20 RCC base and side walls with 10mm dia.tor steel @ 6" c/c both ways and 3" thick Grade 20 RCC cover slab with 10mm dia. tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces as per Drawing No:WSS/10/02

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 44

Sewer Manhole - Brick
U 08 Construction of brick sewer manhole internal size of 2'-1" x 1'-7" & depth vary from 1'-6" - 3'-0", consist of 6" thick Grade 15 lean concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks, concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/03 Nr.

U 09

Construction of brick sewer manhole internal size of 2'6" x 1'-7" & depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15 lean concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks , concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/03 Construction of brick sewer manhole internal size of 3'4 1/2" x 2'-3" & depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15 lean concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks , concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/04 Construction of brick sewer manhole internal size of 4'6" x 2'-7 1/2" & depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15 lean concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks, concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/05

Nr.

U 10

Nr.

U 11

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 45

U 12

Construction of brick sewer manhole internal size of 4'6" x 2'-7 1/2" & depth vary from 3'-0" - 5'-0", consist of 6" thick Grade 15 lean concrete base and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks, concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/05

Nr.

U 13

Construction of brick Interceptor manhole internal size 4'6"x 2'-7 1/2" depth up to 5'-6" Consists of 3" thick grade 15 lean concrete & 6" thick Grade 20 concrete base , 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces including interceptor with stopper and forming channels with 1:6 benching including working spaces as per Drawing No:- WSS/10/06

Nr.

U 14

Construction of brick drop manhole internal size 4'6"x 2'-7 1/2" and depth up to 5'-0", Consists of 6" thick Grade 20 concrete base with 10mm dia. tor steel @ 8" c/c both ways on 3"thick Grade 15 lean concrete and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia. tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks , concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channels with 1:6 benching including P.V.C. specials , M.S. foot steps & working spaces as per Drawing No:-WSS/10/07

Nr.

U 15

Construction of brick drop manhole internal size 4'-6"x 2'-7 1/2" and depth vary from 5'-0" - 10'-0", Consists of 6" thick Grade 20 concrete base with 10mm dia. tor steel @ 8" c/c both ways on 3"thick Grade 15lean concrete and 9" thick brick masonry side walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks , concrete pad and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching including P.V.C. specials, M.S. foot step & working spaces per Drawing No:- WSS/10/07

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 46

Sewer Manhole - Concrete
U 16 Construction of RCC sewer manhole internal size of 2'-1" x 1'-7" & depth up to 2'-0", consist of 2" thick Grade 15 lean concrete and 6" thick Grade 20 concrete base and side walls r/f with 10mm dia. tor steel @ 8" c/c both ways , with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching. as per Drawing No:- .WSS/10/08 Nr.

U 17

Construction of RCC sewer manhole internal size of 2'6" x 1'-7" & depth vary from 2'-0" - 3'-0" , consist of 2" thick Grade 15 lean concrete and 6" thick Grade 20 concrete base and side walls r/f with 10mm dia. tor steel @ 8" c/c both ways , with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement , sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/08

Nr.

U 18

Construction of RCC sewer manhole internal size of 3'4 1/2" x 2'-3" & depth vary from 2'-0" - 3'-0" , consist of 2" thick Grade 15 lean concrete and 6" thick Grade 20 concrete base and side walls r/f with 10mm dia. tor steel @ 8" c/c both ways , with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement , sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:-WSS/10/09

Nr.

U 19

Construction of RCC sewer manhole internal size of 4'-6" x 2'-7 1/2" & depth vary fro0m 2'-0" - 3'-0" , consist of 2" thick Grade 15 lean concrete and 6" thick Grade 20 concrete base and side walls r/f with 10mm dia. tor steel @ 8" c/c both ways , with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:-WSS/10/08

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 47

U 20

Construction of RCC sewer manhole internal size of 4'-6" x 2'-7 1/2" & depth vary from 3'-0" - 5'-0" , consist of 2" thick Grade 15 lean concrete and 6" thick Grade 20 concrete base and side walls r/f with 10mm dia. tor steel @ 8" c/c both ways , with 3" thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 1/2" thick cement , sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:- WSS/10/10

Nr.

Manhole Covers
U 21 RCC Manhole cover size of 2'-0" x 2'-0" approx. & 3" thick Consist of 1:2:4(3/4") concrete & 10mm dia. Tor steel bars @ 6" C/C both ways. Rate include necessary formwork and lifting hooks. Supplying & fixing heavy duty Cast Iron manhole cover size of 24" x 18" including cover frame. Sq.ft.

U 22

Nr.

Gulleys
U 23 U 24 Gulley S.W. 4" supplied and fixed including 1:2:4(3/4")concrete gully box. Construction of gully internal size of 1'-2" x 1'-2" & depth up to 1'-4" , consist of 3" thick Grade 20 concrete base and 4 1/2" thick brick masonry side walls in 1:3 cement sand mix , with 2" thick Grade 20 RCC cover slab with 6mm dia.M S rods @ 4" c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks, supplying P.V.C.gully trap infill with grade 20 concrete and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth with neat grey cement to all internal surfaces , exposed external surfaces and forming channel with 1:6 benching as per Drawing No:-WSS/10/11 Nr. Nr.

Soakage Pits
U 25 U 26 U 27 U 28 U 29 U 30 Construction of 4'-0" dia. soakage pit in hard soil including necessary excavation as per Drawing No:- WSS/SP/01. Construction of 6'-0" dia. soakage pit in hard soil including necessary excavation as per Drawing No:- WSS/SP/02. Construction of 8'-0" dia. soakage pit in hard soil including necessary excavation as per Drawing No:- WSS/SP/03. Construction of 4'-0" dia. soakage pit in loose soil including necessary excavation as per Drawing No:- WSS/SP/04. Construction of 6'-0" dia. soakage pit in loose soil including necessary excavation as per Drawing No:- WSS/SP/05. Construction of 8'-0" dia. soakage pit in loose soil including necessary excavation as per Drawing No:- WSS/SP/06. Nr. Nr. Nr. Nr. Nr. Nr.

Septic tanks
U 31 Construction of 30 person Septic tank (Brick) including necessary excavation as per Drawing No:- WSS/ST/01. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 48

U 32 U 33 U 34 U 35 U 36 U 37 U 38

Construction of 50 person Septic tank (Brick) including necessary excavation as per Drawing No:- WSS/ST/01. Construction of 70 person Septic tank (Brick) including necessary excavation as per Drawing No:- WSS/ST/02. Construction of 100 person Septic tank (Brick) including necessary excavation as per Drawing No:- WSS/ST/01. Construction of 150 person Septic tank (Brick) including necessary excavation as per Drawing No:- WSS/ST/02. Construction of 100 person RCC Septic tank soil including necessary excavation as per Drawing No:-WSS/ST/03. Construction of 150 person RCC Septic tank soil including necessary excavation as per Drawing No:- WSS/ST/04. Supplying and fixing 4'-0" dia.x 8'-0" Pre-cast Septic tank manufactured by "SEC" or approved equivalent including excavation depth not exceeding 8'-0" and sand fill up to 2'-0" height surrounding the tank. Rate shall include hire charges of boom truck for placing and subject to specified approved by the Divisional Engineer. Supplying and fixing 3'-0" internal dia.x 4'-0" depth & 3" thick walls, Pre-cast Soakage pit with perorated holes manufactured by "SEC" or approved equivalent including necessary excavation including working space and 6" thick rubble packing surrounding the tank. Rate shall include hire charges of boom truck for placing and subject to specified approved by the Divisional Engineer.

Nr. Nr. Nr. Nr. Nr. Nr. Nr.

U 39

Nr.

V - ELECTRICAL INSTALLATION.
Note: Work shall be done in accordance with specifications for electrical and mechanical works(ICTAD Publication No.SCA/8 of Nov.1987 Internal lighting wiring shall comply with the drawings and shall be in 230/440 volt single core PVC insulated copper cables All switches and socket outlets shall be plated type "Clipsal", " Orange "or Krypton or any other approved equivalent complying to SLS1000:1993 for switches & SLS 198 : 1991 for soketoutlets make. All Fluorescent fittings of powder coated gauge 24 GI should be complete with choke (Make:-"Atco","BG" original or -Equivalent) starter and the tube should be Thron, Philips, or Osram All ceiling fans should be KDK, USHA NEW QUANTA Model, Panasonic with guarantee card from the authorized dealer. Rate to include switch boxes, owl plugs, round or square blocks, Chromium plated M.S. chains, brass hooks, ceiling roses, holders and any other item necessary.

1

2

3

4

5

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 49

6

All distribution boards should be incorporated with multi 9, Merlin Gerin, A.B.B. , Hager, F & G / TECS , Terrasaki, Moeller/ETN, clipsal make MCB's ( Miniature circuit Breaker ) and cabtree, F & G, Clipsal , Merlin Gerin make R.C.C.B.'s (Residual Current circuit Breaker) and Terrasaki, Merlin Gerin, , Dormans Smith ,Biticano , Clockner moeller make M.C.C.B.'s (Moulded Case Circuit Breakers) The whole installation shall be carried out according to CEB/IEE wiring regulations. All the M.C.C.B.'s for the distribution boards should be purchased from the following authorized agents or from their dealers and a certificate or invoice along with their Company seal and Part No., numbers should be produced at the time of payment. Type 1. Merlin Gerin M.C.C.B.'s Agent Figaro Ltd. '

7

8

2. F & G / TECS, Terrasaki/TECS M.C.B.'s and R.C.C.B.'s Rotex Ltd. 3. Terrasaki M.C.C.B.'s 4. Cabtree R.C.C.B.'s 5. Moeller / ETN Richardson Electrical (Pvt) Ltd. Rotex Ltd. Nawaloka Ltd. MCB,MCCB,RCCB

' ' ' '

6. Orange,Switches and Socket outlet (Pvt) Ltd. 7. Steel Enclosures Figaro Ltd./MSS(Pvt) Ltd. 8.Lighting Fittings ' 9 10 11

OS Projects

Rotax Ltd./ Magline Ltd. /

Myland Marketing 18, Devos Avenue, Colombo - 04

The height of the light bracket from floor level is 2.5m Height of the switches from floor level is 1.5m No ceiling fan should be installed at a height of less than 2.7m from floor level The distance of a light source from the wall should be equal to one half the distance between two adjacent light sources and also the distance between light fittings should not exceed 1.5 times the Mounting height. Point wiring only with and including switches (Rate includes wiring from MCB through switch to lamp point and includes the switch, switch box, lamp holder wire and conduit) Point wiring only with and including Socket (Rate includes wiring from MCB to the Socket, socket box, and conduit)

12

13

14

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 50

15

In case the cable length of wiring point exceed 80 feet refer item V76 & V 84 payment for additional length. POINT WIRING WITHOUT EARTHWIRE. Items V 01 - V 20 shall be used for light point wiring with NonMetal casing lamp fittings.

V 01

Light point wired through a 5Amp one gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light points wired through a 5 Amp two gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light points wired through a 5 Amp three gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light points wired through a 5 Amp four gang one way plate switch using 2x1/1.13mm (2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light points-wired through a 5Amp 5 gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5 Amp one gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light points wired through a 5 Amp two gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light points wired through a 5 Amp three gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light points wired through a 5 Amp four gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light points wired through a 5 Amp. 5 gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light point wired through a 5 Amp one gang one way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Light points wired through a 5 Amp two gang one way using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Light points wired through a 5 Amp three gang one way using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit.

Per Point

V 02

Per Point

V 03

Per Point

V 04

Per Point

V 05

Per Point

V 06

Per Point

V 07

Per Point

V 08

Per Point

V 09

Per Point

V 10

Per Point

V 11

Per Point

V 12

Per Point

V 13

Per Point

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 51

V 14

Light points wired through a 5 Amp four gang one way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Light points wired through a 5 Amp. five gang one way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping. Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Electric Bell with Bell press switch using 2x1/1.13mm (2x1.044) PVC/insulated copper wire in fully concealed/ surface PVC conduits. Electric Bell with bell press switch using flexible wire (twisted twin wire) only in the table legs and floor crossings. POINT WIRING WITH EARTHWIRE. Items V 21 - V 39 shall be used for light point wiring with Metal casing lamp fittings.

Per Point

V 15

Per Point

V 16

Per Point

V 17

Per Point

V 18

Per Point

V 19

Per Point

V 20

Nr.

V 21

Light point wired through a 5Amp one gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5Amp two gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5Amp three gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5Amp four gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. Light point wired through a 5Amp five gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits.

Per Point

V 22

Per Point

V 23

Per Point

V 24

Per Point

V 25

Per Point

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 52

V 26

Light point wired through a 5Amp one gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp two gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp three gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp four gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp five gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp one gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp two gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp three gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp four gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp five gang one way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits.

Per Point

V 27

Per Point

V 28

Per Point

V 29

Per Point

V 30

Per Point

V 31

Per Point

V 32

Per Point

V 33

Per Point

V 34

Per Point

V 35

Per Point

V 36

Per Point

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 53

V 37

Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Light point wired through a 5Amp one gang two way plate switch using 2x1/1.13mm(2x1/044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire first half in surface plastic casing & capping and other half in conduit. Electric Bell with Bell press switch using 2x1/1.13mm (2x1.044) P.V.C. insulated copper wire & & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. SWITCH SOCKET WIRING ( V 40 - V 44 )

Per Point

V 38

Per Point

V 39

Per Point

V 40

Flush mounted 5 Amp Switch socket outlet wired using 2x1/1.13mm (2x1/044) P.V.C. insulated copper wire & 1x7/0.67(7/029) copper earth wire in fully concealed/surface P.V.C. conduits. 5 Amp Switch socket outlet wired using 2x1/1.13mm (2x1/044) P.V.C. insulated copper wire & 1x7/0.67(7/029)copper earth wire in fully surface plastic casing and capping. Flush mounted 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029) insulated copper wire & 1x7/0.67(7/029) copper earth wire in fully concealed/surface P.V.C. conduits. 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029) insulated copper wire & 1x7/0.67(7/029) copper earth wire in surface plastic casing and capping. 13 Amp. non-reversible type square pin switched socket outlets wired in ring circuit using 4x1x7/0.67 PVC insulated copper wire and 2x7/0.67 PVC insulated copper earth wire in casing and capping. R = {( 650.00 x L)+(500.00 x N)} / N

Nr.

V 41

Nr.

V 42

Nr.

V 43

Nr.

V 44

Nr.

R = Rate per circuit (to be calculated as per formula.
L = Distance from DB to last socket ( in Meter) N = Number of 13 Amp. sockets Rate for items V 45 - V 52 shall include the cost of WIRING , REGULATOR, FAN HOOK & OTHER ACCESSORIES V 45 Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits. Fan regulator wired through a 5 Amp plate one gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C.conduits. Nr.

V 46

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 54

V 47

Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping. Fan regulator wired through a 5 Amp plate one gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully surface plastic casing and capping Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in half surface with plastic casing and copping and other half in conduit. Fan regulator wired through a 5 Amp plate one gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire 1x7/0.67 P.V.C. insulated copper earth wire in half surface with plastic casing and copping and other half in conduit. Two Fan regulator wired through a 5Amp plate two gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/ surface PVC conduit Three Fan regulator wired through a 5Amp plate three gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/ surface PVC conduit Supply & Install only the following (V 53 - V 58)

Nr.

V 48

Nr.

V 49

Nr.

V 50

Nr.

V 51

Nr.

V 52

Nr.

V 53 V 54 V 55 V 56 V 57

Ceiling fan 56" Sweep (KDK, Panasonic & Usha ) Dimmer type fan regulator with a switch (Clipsal, KDK,Orange or equivalent) Exhaust or blower fan 12" dia. (K.D.K. or Equivalent ) Wall mounted fan - European make (K.D.K. or Equivalent ) Supply & Fixing heavy duty 3/4" dia. x 3.2mm thick GI pipes to extend the ceiling fan rod with applying 2 coats of anti-corrosive paint and one coat of enamel paint. Supply & Fixing heavy duty 1" dia. x 3.2mm thick GI pipes to extend the ceiling fan rod with applying 2 coats of anti-corrosive paint and one coat of enamel paint. CABLE WIRING.

Nr. Nr. Nr. Nr. L.ft.

V 58

L.ft.

V 59 V 60

Supplying and wiring 2 x 2.5mm (7/.029") PVC/PVC/Cu cable + 2 2.5mm (7/.029) earth wire to working order excluding conduit. Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable + 6mm2 (7/.044") earth wire complete to working order excluding conduit/casing Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable complete to working order excluding conduit/casing

2

L.ft. L.ft.

V 61

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 55

V 62

Supplying and wiring 4 x 6mm (7/.044") PVC/PVC/ Cu cable + 6mm (7/.044") earth wire complete to working order excluding conduit/casing
2

2

2

L.ft.

V 63

Supplying and wiring 2 x 10mm (7/.052") PVC/PVC/ Cu cable + 10mm2 (7/.052") earth wire complete to working order excluding conduit/casing Supplying and wiring 4 x 10mm2 (7/.052") PVC/PVC/ Cu cable + 2 10mm (7/.052") earth wire complete to working order excluding conduit/casing Supplying and wiring 2 x 16mm (7/.064") PVC/PVC/ Cu cable + 16mm2 (7/.064") earth wire complete to working order excluding conduit/casing Supplying and wiring 4 x 16mm2 (7/0.064") PVC/PVC/ Cu cable + 2 16mm (7/.064") earth wire complete to working order excluding conduit/casing Supplying and wiring 2 x 25mm2 PVC/PVC/Cu cable + 16 mm2 earth wire complete to working order excluding conduit/casing. Supplying and wiring 4 x 25mm2 PVC/PVC/Cu cable + 16 mm2 earth wire complete to working order excluding conduit/casing. Supplying and wiring 4 x 35mm2 PVC/PVC/Cu cable + 16 mm2 earth wire complete to working order excluding conduit/casing. Supplying and wiring 4 x 95mm2 PVC/PVC/Cu cable + 50 mm2 earth wire complete to working order excluding conduit/casing. Supplying and fixing 2 core flexible (0.5mm ) . Supplying and wiring 2.5mm (7/.029") earth wire complete to working order excluding conduit/casing. Supplying and wiring 6 mm2 (7/.044") earth wire complete to working order excluding conduit/casing. Supplying and wiring 10 mm2 (7/.052") earth wire complete to working order excluding conduit/casing. Supplying and wiring 16 mm2 (7/.064") earth wire complete to working order excluding conduit/casing. Supplying and wiring 1mm (1/.044") PVC/PVC/ Cu two wire complete to working order excluding conduit/casing. Supplying and wiring 2.5mm (7/.029") PVC/PVC Cu two wire complete to working order excluding conduit/casing. Supplying and wiring with 4mm (7/.036") PVC/PVC/Cu two wire complete to working order excluding conduit/casing. Supplying and wiring with 2 x 4mm2 (7/.036") PVC/PVC/Cu cable+4mm2(7/.036) earth wire complete to working order excluding conduit/casing.
2 2 2 2 2 2

L.ft.

V 64

L.ft.

V 65

L.ft.

V 66

L.ft.

V 67 V 68 V 69 V 70 V 71 V 72 V 73 V 74 V 75 V 76 V 77 V 78 V 79

L.ft. L.ft. L.ft. L.ft.

L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 56

V 80

Supplying and wiring with 4 x 4mm (7/.036") PVC/PVC/Cu cable+4mm2(7/.036) earth wire complete to working order excluding conduit/casing. Supplying and wiring with 4 x 2.5mm2(7/.029") PVC/PVC/Cu 2 cable+2.5mm (7/.036) earth wire complete to working order excluding conduit/casing. 3/4" - 1" PVC conduits laying in the slab including placing binding wire to draw through conduits. Supplying and fixing 5/8" PVC conduit including clips. Supplying and fixing 3/4" PVC conduit including clips. Supplying and fixing 1" PVC conduit including clips. Supplying and fixing 1 1/4" dia. PVC conduit pipe Supplying and fixing 1 1/2" dia. PVC conduit pipe Supplying and fixing 2" dia. PVC conduit pipe Supplying and fixing 1 1 /4" dia. type 400 PVC pipe including clips. Supplying and fixing 1 1 /2" dia. type 400 PVC pipe including clips. Supplying and fixing 3" dia. type 400 PVC pipe including clips. Supplying and fixing 3/4" dia. PVC conduit bend Supplying and fixing 1" dia. PVC conduit bend Supplying and fixing 1 1/4" dia. PVC conduit bend Supplying and fixing 1 1/2" dia. PVC conduit bend Supplying and fixing 2" dia. PVC conduit bend Supplying and fixing 3/4" or 1" PVC conduit junction box. Supplying and fixing 1" PVC casing Supplying and fixing 1 1/4" PVC casing Supplying and fixing 1 1/2" PVC casing Supplying and fixing 2" PVC casing Supplying and fixing 2"x 2: box casing. PVC casing DB / RCCB / MCCB / MCB Plastic encloser

2

L.ft.

V 81

L.ft.

V 82 V 83 V 84 V 85 V 86 V 87 V 88 V 89 V 90 V 91 V 92 V 93 V 94 V 95 V 96 V 97 V 98 V 99 V 100 V 101 V 102

L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. L.ft. Nr. Nr. Nr. Nr. Nr. Nr. L.ft. L.ft. L.ft. L.ft. L.ft.

V 103

4-8 ways SP&N Distribution Board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) 8-10 ways SP&N Distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40)

Nr.

V 104

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 57

V 105

10-12 ways SP&N Distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) 14-16 ways SP&N distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) 16-19 ways SP&N Distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) Steel Encloser Steel Encloser With a)Material - Electo Sink Coated Sheet Steel (1 - 2 mm thick) b)Surface finished - Powder Coated c)Construction - Hinged door ,Rubber gasket, key lock, outing Plate,Glaned Plate Protection - IP 54

Nr.

V 106

Nr.

V 107

Nr.

V 108 V 109 V 110

Size -200mm(W) *200mm(H) * 150mm(D) Size -400mm(W) *400mm(H) * 150mm(D) Size -600mm(W) *600mm(H) * 200mm(D) Note: Supply, install and wire with enclosure the following makes : Cabtree, F & G/ TECS, Terrasaki,Moeler/TEN. Genuine, Merlin & Gerin,

Nr. Nr. Nr.

V 111 V 112 V 113 V 114 V 115 V 116 V 117 V 118 V 119 V 120 V 121 V 122 V 123 V 124 V 125

40Amp, 30 mA Double Pole ELCB (RCCB) 40Amp, 100 mA Double Pole ELCB (RCCB) 40Amp, 300 mA Double Pole ELCB (RCCB) 63Amp, 30 mA Double Pole ELCB (RCCB) 63Amp, 100 mA Double Pole ELCB (RCCB) 63Amp, 300 mA Double Pole ELCB (RCCB) 40Amp, 30 mA Four Pole ELCB (RCCB) 40Amp, 100 mA Four Pole ELCB (RCCB) 40Amp, 300 mA Four Pole ELCB (RCCB) 63Amp, 30 mA Four Pole ELCB (RCCB) 63Amp, 100 mA Four Pole ELCB (RCCB) 63Amp, 300 mA Four Pole ELCB (RCCB) 100Amp, 300 mA Four Pole ELCB (RCCB) 30 Amp Double Pole Main Switch 30 Amp Four Pole Main Switch

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 58

V 126 V 127

60 Amp Four Pole Main Switch MCCB metal enclosure. Steel Encloser With a)Material - Electo Sink Coated Sheet Steel (1 - 1.6 mm thick) b)Surface finished - Powder Coated c)Construction - Hinged door ,Rubber gasket, key lock, outing Plate,Glaned Plate Protection - IP 54 Size 250mm(W) * 300mm(H) * 125mm(D) 30,40,60,100 Amp , 25KA Three Pole MCCB without metal enclosure. 30,40,60,100 Amp , 25KA Four Pole MCCB without metal enclosure. 125 Amp , 25KA Three Pole MCCB without metal enclosure. 160 Amp , 25KA Three Pole MCCB without metal enclosure. 250 Amp , 25KA Three Pole MCCB without metal enclosure. 125 Amp , 25KA Four Pole MCCB without metal enclosure. 160 Amp , 25KA Four Pole MCCB without metal enclosure. 250 Amp , 25KA Four Pole MCCB without metal enclosure. 6 - 32 Amp Single Pole MCB 40 Amp Single Pole MCB 63 Amp Single Pole MCB 6 - 32 Amp Double Pole MCB 40 Amp Double Pole MCB 63 Amp Double Pole MCB 6 - 32 Amp Three Pole MCB 40 Amp Three Pole MCB 63 Amp Three Pole MCB 6 - 32 Amp Four Pole MCB 40 Amp Four Pole MCB 63 Amp Four Pole MCB 40 Amp Double Pole Isolator with plastic enclosure. 63 Amp Double Pole Isolator with plastic enclosure. 100 Amp Double Pole Isolator with plastic enclosure. 40 Amp Three Pole Isolator with plastic enclosure. 63 Amp Three Pole Isolator with plastic enclosure.

Nr. Nr.

V 128 V 129 V 130 V 131 V 132 V 133 V 134 V 135 V 136 V 137 V 138 V 139 V 140 V 141 V 142 V 143 V 144 V 145 V 146 V 147 V 148 V 149 V 150 V 151 V 152

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 59

V 153 V 154 V 155 V 156

100 Amp Three Pole Isolator with plastic enclosure. 40 Amp Four Pole Isolator with plastic enclosure. 63 Amp Four Pole Isolator with plastic enclosure. 100 Amp Four Pole Isolator with plastic enclosure. LIGHT FITTINGS

Nr. Nr. Nr. Nr.

Note:
Rate for items V 157 - V 189 shall include the cost of adapter, connecting 2core 1mm2 cable of length not exceeding 1.5m , galvanized hanging chain. (incase the cable length exceed 1.5m refer item V 76 Payment for additional length.) Note: Lamp fitting with more than two year Warranty Supply & Install only the following fittings. V 157 Inner diameter of 5" recess mounted down light with polished aluminium reflector of "Simy" Brand & Model No:SIYDL125R or approved equivalent. Inner diameter of 5" surface mounted down light with polished aluminium reflector of "Simy" Brand & Model No:SIYDL125S or approved equivalent. Inner diameter of 4" wall mounted cylindrical shaped upward light fitting of "Simy" Brand & Model No:SIYWB937 or approved equivalent. Weatherproof IP65 rated wall mounted cylindrical shaped up down ward light fitting of "Simy" Brand & Model No:SIYWB3027 or approved equivalent. Weatherproof IP65 rated wall mounted 2'-0" single fluorescent light fitting with 18W bulb of "Simy" Brand & Model No:SIYWP120 or approved equivalent. 8" clear transparent glass globe pendent type light fitting of "Simy" Brand & Model No:SIYWB937 or approved equivalent. Spot light with bulbs of "Simy" Brand & Model No:SIYSP120PAR or approved equivalent. Pendent Lamp 20W CFL lamp with one year warranty - Osram , Philips or Approved Equivalent. Mercury Vapour Lamp bracket complete 125 watts with clamps (equivalent to Siemens SNA 395) Mercury Vapour Lamp bracket complete 250 watts with clamps (equivalent to Siemens SNA 395) Nr.

V 158

Nr.

V 159

Nr.

V 160

Nr.

V 161

Nr.

V 162 V 163 V 164 V 165 V 166 V 167

Nr. Nr. Nr. Nr. Nr. Nr.

Note:

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 60

In all fluorescent lamp complete fittings incorporating, choke-Atco, BG and starter, Bulb-Philips, Osram, Thorn Choke-Atco, Starter BG and Bulbs - Philips, osram, Thorn V 168 4'-0" long single fluorescent lamp fitting , suspension - opal white/diamond cut diffuser with 1 no of 36W fluorescent bulb of "Simy" Brand & Model No:SIYBD140BD or approved equivalent. 4'-0" long Twin fluorescent lamp fitting , suspension - opal white/diamond cut diffuser with 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYBD240BD or approved equivalent. 2'-0" long single fluorescent lamp fitting , suspension - opal white/diamond cut diffuser with 1 no of 18W fluorescent bulb of "Simy" Brand & Model No:SIYBD120BD or approved equivalent. 2'-0" long Twin fluorescent lamp fitting , suspension - opal white/diamond cut diffuser with 2 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYBD220BD or approved equivalent. 4'-0" long single fluorescent lamp fitting , suspension - polished aluminium reflector with 1 no of 36W fluorescent bulb of "Simy" Brand & Model No:SIYBR140M or approved equivalent. 4'-0" long Twin fluorescent lamp fitting , suspension - polished aluminium reflector with 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYBR240M or approved equivalent. 2'-0" long single fluorescent lamp fitting , suspension - polished aluminium reflector with 1 no of 18W fluorescent bulb of "Simy" Brand & Model No:SIYBR120M or approved equivalent. 2'-0" long Twin fluorescent lamp fitting , suspension - polished aluminium reflector with 2 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYBR220M or approved equivalent. 4'-0" long single fluorescent lamp fitting , suspension - round prismatic diffuser with 1 no of 36W fluorescent bulb of "Simy" Brand & Model No:SIYBLD140 or approved equivalent. 4'-0" long Twin fluorescent lamp fitting , suspension - round prismatic diffuser with 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYBLD240 or approved equivalent. 2'-0" long single fluorescent lamp fitting , suspension - round prismatic diffuser with 1 no of 18W fluorescent bulb of "Simy" Brand & Model No:SIYBLD120 or approved equivalent. 2'-0" long Twin fluorescent lamp fitting , suspension - round prismatic diffuser with 2 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYBLD220 or approved equivalent. 4'-0" long single fluorescent lamp fitting , batton type with 1 no of 36W fluorescent bulb of "Simy" Brand & Model No:SIYBF140 or approved equivalent. Nr.

V 169

Nr.

V 170

Nr.

V 171

Nr.

V 172

Nr.

V 173

Nr.

V 174

Nr.

V 175

Nr.

V 176

Nr.

V 177

Nr.

V 178

Nr.

V 179

Nr.

V 180

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 61

V 181

4'-0" long Twin fluorescent lamp fitting , batton type with 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYBF240 or approved equivalent. 2'-0" long single fluorescent lamp fitting , batton type with 1 no of 18W fluorescent bulb of "Simy" Brand & Model No:SIYBF120 or approved equivalent. 2'-0" long Twin fluorescent lamp fitting , batton type with 2 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYBF220 or approved equivalent. 2'-0" x 2'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louver and 2 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYPL220R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT 2'-0" x 2'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louver and 3 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYPL320R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT 2'-0" x 2'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louver and 4 nos of 18W fluorescent bulbs of "Simy" Brand & Model No:SIYPL420R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT 2'-0" x 4'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louvered diffuser and 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYPL240R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT 2'-0" x 4'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louvered diffuser and 3 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYPL340R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT 2'-0" x 4'-0" Recessed mounted fluorescent lamp fittings with full parabolic polished aluminium mirror louvered diffuser and 4 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYPL440R/S or approved equivalent. COMPLETE WITH ELECTRONIC BALLAST PHILIPS / TOSHIBA FLOURESCENT others Provide an earth electrode copper plate 2'-0" x 2'-0" x 3mm thick at 3.0m depth including excavation and backfilling. Rate shall include connection to the main panel, sub main, earth clips & etc. with 1'-0" x 1'0" x 1'-0" earth pit consist of 4 1/2" brick work , 3" thick G20 concrete cover slab.( Earth wire paid separately )

Nr.

V 182

Nr.

V 183

Nr.

V 184

Nr.

V 185

Nr.

V 186

Nr.

V 187

Nr.

V 188

Nr.

V 189

Nr.

V 190

Item

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 62

V 191

Provide an earth electrode 6'-0" long , 2" dia. x 3.6mm thick medium duty GI pipe. Rate shall include connection to the main panel, sub main, earth clips& etc. with 1'-0" x 1'-0" x 1'-0" earth pit consist of 4 1/2" brick work , 3" thick G20 concrete cover slab.( Earth wire paid separately ) D'Bracket complete set (small size)

Item

V 192 V 193 V 194

Supply and install complete "D" shape bracket including insulator, Nuts, bolts ect. fixed to working order. Supply and install 50mm x 50mm x 6mm "L" Iron, including drilling 12mm holes, 10mm G.I. bolt, and application of anticorrosive paint all complete to working order.
Supply and installation and connection of 25 x 3mm copper tape with necessary accessories. Rate shall include for connection of both ends with brass. Supply and installation and connection of 30A - 60A three phase with powder coated lockable bus bar box With bus bars including neutral bar and earth bar. Supply and installation and connection of 100A - 125A three phase with powder coated lockable bus bar box With bus bars including neutral bar and earth bar. Supply and installation and connection of 30A - 60A single phase with powder coated lockable bus bar box With bus bars including neutral bar and earth bar. Testing of the electrical installation and submission of certificate from a chartered Electrical Engineer registered at CEB. For Building Floor Area Less than 2500 Sq. ft. For Building Floor Area between 2500 - 5000 Sq. ft. For Building Floor Area between 5000 - 10000 Sq. ft. For Building Floor Area more than 510000 Sq. ft. Main Supply of 30Amp Single Phase from Ceylon Electricity Board or Lanka Electricity Company Main Supply of 60Amp Single Phase from Ceylon Electricity Board or Lanka Electricity Company Main Supply of 30Amp Three Phase from Ceylon Electricity Board or Lanka Electricity Company Main Supply of 60Amp Three phase from Ceylon Electricity Board or Lanka Electricity Company

Nr. Per Set L.ft.

V 195

L.ft.

V 196

Nr.

V 197

Nr.

V 198

Nr.

V 199 a) b) c) d) V 200 V 201 V 202 V 203

Item Item Item Item Item Item Item Item

W - METAL WORK
Note: Aluminium doors, windows and partitions shall confirm to the following requirements: 1 2 Aluminium alloy should confirm to- BS 1474:1972 Surface treatment shall confirm to BS 1615 and BS 3987 Anodized coating thickness should be 25 ± 5 microns

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 63

3

Minimum section thickness 1.6mm door frame , 1.5 mm window frame and 1.2 mm partition. Most of the aluminium extrusions available in the Local Market are being manufactured in Sri Lanka by the following leading companies and both companies are changing the extrusion profiles and thicknesses from time to time. Hence it has become very difficult t o specify standard section sizes that are to be used for door /window frames and sash members. Hence the rates given herein are based on the recommended minimum sizes and thicknesses and profiles as per their hand books published by M/S ALUMAX (PVT) LTD and by M/S LANKA ALUMINIUM INDUSTRIES LTD and M/S HEMALCO LTD. At the time of bidding, all the Bidders shall specifically be requested to submit the following information. The specifications and thickness of Aluminium extrusions bidder proposes to use on the works. Full size cross sections Documentary evidence from the Profile Manufacture to the effect that the proposed profile will serve for the intended purpose. A Manufacturer's test certificate be produced as evidence that the powder coating is of required thickness. Physical properties :(a) Minimum tensile strength 150 Mpa (b) Elongation 7%

4

5 (a) (b) (c)

(d) 6

7 8

All screws should be stainless steel But hinges and bar type hinges should be Aluminium or Stainless Steel. The item descriptions should be read along with the annexed detail drawings. Drawing no:AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/DETAIL 1 - 19 ( Sheet 1 - 19 ) Doors - 100mm x 1.6mm thick, Casement - 70mm x 1.5mmthick, Sliding - 80mm x 1.5mm thick, Partition - 76mm x 1.2mm thick Shop drawing should be provided prior to fabrication.

9

10

The rates and hence the item description shall include 5mm thick Clear glass, Neoprene gasket, pop rivets, Rawl plugs, Screws, Aluminium cleats etc. The rates given herein are for Natural aluminium profiles.

11

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 64

12

For powder coated aluminium profiles (minimum powder coating thickness of 60 ± 5 microns) the rates shall be increased by 15%. For Bronze anodized aluminium profiles, the rates shall be increased by 5%. For using Tinted glass, the rates shall be increased by 2%. Where using floor hinged type doors deduct 5% of the related rate. Floor hinge & Door closer paid separately as W-63, W-64 & W-65. Doors

13

14

15

W 01

Openable Single Sash Door (Aluminium Composite Panel & Glazed ) with Louvers on Top Natural aluminium single sash butt hinged openable door with middle rail and louvers on top , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 02 - D1 Sq.ft.

W 02

Openable Single Sash Door (Aluminium Composite Panel & Glazed ) with Fixed Glass on Top Natural aluminium single sash butt hinged openable door with middle rail and fixed glass on top , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 02 - D2 Sq.ft.

W 03

Openable Single Sash Door (Aluminium Composite Panel & Glazed ) Natural aluminium single sash butt hinged openable door with middle rail , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 02 D3

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 65

W 04

Openable Single Sash Door (Fully Glazed ) with Louvers on Top Natural aluminium single sash butt hinged openable door with middle rail and louvers on top , glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 03 - D4 Openable Single Sash Door (Fully Glazed ) with Fixed Glass on Top Natural aluminium single sash butt hinged openable door with middle rail and fixed glass on top , glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 03 - D5 Openable Single Sash Door ( Fully Glazed ) Natural aluminium single sash butt hinged openable door with middle rail and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 03 - D6 Sq.ft.

W 05

Sq.ft.

W 06

Sq.ft.

W 07

Openable Single Sash Door ( Fully panelled with Aluminium Composite Panel ) Natural aluminium single sash butt hinged openable door with middle rail and fully panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ), neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 04 - D7 & D8 Sq.ft.

W 08

Sliding Single Sash Door (Aluminium Composite Panel & Glazed ) Natural aluminium single sash sliding door with middle rail , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut roller, flush bolt and approved quality lock , door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 05 - D9 Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 66

W 09

Sliding Single Sash Door ( Fully Glazed ) Natural aluminium single sash fully glazed sliding door with middle rail , glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut roller, flush bolt and approved quality lock , door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 05 - D10 Sq.ft.

W 10

Sliding Single Sash Door ( Fully Composite Panel )

panelled with Aluminium

Natural aluminium single sash sliding door with middle rail , fully panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ), neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut roller, flush bolt and approved quality lock , door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 05 - D11 Openable Double Sash Door (Aluminium Composite Panel & Glazed ) with Fixed Glass on Top Natural aluminium double sash butt hinged openable door with middle rail and fixed glass on top , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 06 - D12

Sq.ft.

W 11

Sq.ft.

W 12

Openable Double Sash Door (Aluminium Composite Panel & Glazed ) with Louvers on Top Natural aluminium double sash butt hinged openable door with middle rail and louvers on top , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 06 - D13 Openable Double Sash Door (Aluminium Composite Panel & Glazed ) Sq.ft.

W 13

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 67

Natural aluminium double sash butt hinged openable door with middle rail , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 06 D14 W 14 Openable Double Sash Door (Fully Glazed ) with Fixed Glass on Top Natural aluminium double sash butt hinged openable door with middle rail and fixed glass on top , fully glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 07 D15 Openable Double Sash Door (Fully Glazed ) with Louvers on Top Natural aluminium double sash butt hinged openable door with middle rail and louvers on top , fully glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/DETAIL 07 - D16

Sq.ft.

Sq.ft.

W 15

Sq.ft.

W 16

Openable double Sash Door ( Fully Glazed ) Natural aluminium double sash butt hinged openable door with middle rail and fully glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/DETAIL 07 - D17 Sq.ft.

W 17

Sliding Double Sash Door (Aluminium Composite Panel & Glazed ) Natural aluminium double sash sliding door with middle rail , panelling with 4mm thick aluminium composite panel on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut roller, flush bolt and approved quality lock , door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/DETAIL 08 - D18 Sq.ft.

W 18

Sliding Double Sash Door ( Fully Glazed ) with Fixed Glass on Top

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 68

Natural aluminium double sash fully glazed sliding door with middle rail , fully glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut roller, flush bolt and approved quality lock , door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/DETAIL 08 - D19

Sq.ft.

W 19

Openable Single Sash Door for Toilets ( with Aluminium Sheet ) Natural aluminium single sash butt hinged openable door with middle rail and gauge 24 aluminium sheet, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 04 - D20 Windows Sq.ft.

W 20

Casement Window with Louvers on Top ( 1 Bay ) Natural aluminium casement window single sash with louvers on top, consisting of 5mm thick clear glass panes, casement lock, pull rings , screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/DETAIL 09 - W1 Sq.ft.

W 21

Casement Window with Fixed Glass on Top ( 1 Bay ) Natural aluminium casement window single sash with fixed glass on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 09 - W2 Sq.ft.

W 22

Casement Window ( 1 Bay ) Natural aluminium casement window single sash , consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/ DOORS & WINDOWS/2010.07.07/DETAIL 09 - W3 Sq.ft.

W 23

Casement Window with Louvers on Top ( 2 Bays ) Natural aluminium casement window double sash with louvers on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/ DOORS & WINDOWS/2010.07.07/ DETAIL 10 - W4 Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 69

W 24

Casement Window with Fixed Glass on Top ( 2 Bays ) Natural aluminium casement window double sash with fixed glass on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/ DOORS & WINDOWS/2010.07.07/ DETAIL 10 - W5 Sq.ft.

W 25

Casement Window ( 2 Bays ) Natural aluminium casement window double sash , consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/ DOORS & WINDOWS/2010.07.07/ DETAIL 10 - W6 Sq.ft.

W 26

Sliding Window with Louvers on Top ( 2 Bays ) Natural aluminium sliding window with louvers on top consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 11 - W7 Sq.ft.

W 27

Sliding Window with Fixed Glass on Top ( 2 Bays ) Natural aluminium sliding window with fixed glass on top consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 11 - W8 Sq.ft.

W 28

Sliding Window ( 2 Bays ) Natural aluminium sliding window ,consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:AR/ TYPE PLAN/ DOORS & WINDOWS/ 2010.07.07/ DETAIL 11 W9 Casement Window with Louvers on Top ( 3 Bays ) Natural aluminium casement window with louvers on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 12 - W10

Sq.ft.

W 29

Sq.ft.

W 30

Casement Window with Fixed Glass on Top ( 3 Bays ) Natural aluminium casement window with fixed glass on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 12 - W11 Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 70

W 31

Casement Window ( 3 Bays ) Natural aluminium casement window, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 12 W12 Sq.ft.

W 32

Sliding Window with Louvers on Top ( 3 Bays ) Natural aluminium sliding window with louvers on top consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 13 - W13 Sq.ft.

W 33

Sliding Window with Fixed Glass on Top ( 3 Bays ) Natural aluminium sliding window with fixed glass on top consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 13 - W14 Sq.ft.

W 34

Sliding Window ( 3 Bays ) Natural aluminium sliding window ,consisting of 5mm thick clear glass panes , lock, roller, screws, gaskets, nut felt, pop rivets, cap, plastic guide etc. As per the members , sizes and details given in Drawing No:AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 13 W15 Sq.ft.

W 35

Top Hung Casement Window with Fixed Louvers on Top & Fixed Glass at Bottom (3 Bays ) Natural aluminium top hung casement window with fixed glass on top and fixed glass at bottom, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 14 - W16 Sq.ft.

W 36

Top Hung Casement Window with Fixed Louvers on Top & Fixed Glass at Bottom (2 Bays ) Natural aluminium top hung casement window with fixed glass on top and fixed glass at bottom, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 14 - W17 Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 71

W 37

Casement Window with Louvers on Top ( 4 Bays ) Natural aluminium casement window with louvers on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 15 - W18 Sq.ft.

W 38

Casement Window with Fixed Glass on Top ( 4 Bays ) Natural aluminium casement window with fixed glass on top, consisting of 5mm thick clear glass panes, casement lock, screws, pop rivets, gaskets, hinges, weather strip etc.As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 15 - W19 Sq.ft.

W 39

Louver Panel 1 Natural aluminium framed lovers, consisting of screws, pop rivets, etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 16 - W20 Sq.ft.

W 40

Louver Panel 2 Natural aluminium framed lovers, consisting of screws, pop rivets, etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 16 - W21 Sq.ft.

W 41

Top Hung Fanlight with Lover panel on top Natural aluminium top hung type fanlight with louver on top consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 17 - FL1 Sq.ft.

W 42

Top Hung Fanlight with Fixed Glass on top Natural aluminium top hung type fanlight with fixed glass on top consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 17 - FL2 Sq.ft.

W 43

Centre Pivot Fanlight with Lover panel on top

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 72

Natural aluminium centre pivot type fanlight with louver on top consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 17 - FL3

Sq.ft.

W 44

Top Hung Fanlight with Fixed Glass on top Natural aluminium centre pivot type fanlight with fixed glass on top consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 17 - FL4 Sq.ft.

W 45

Top Hung Fanlight ( 3 bays ) Natural aluminium top hung type fanlight 3 bays, consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 18 - FL5 Sq.ft.

W 46

Top Hung Fanlight ( 2 Bays + 1 Bay ) Natural aluminium top hung type fanlight 2 bays + 1 bay, consisting of locks, screws, pop rivets, gaskets, hinges, weather strip etc. As per the members , sizes and details given in Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 18 - FL6 Sq.ft.

Fixed Glazed Window W 47 Natural aluminium fixed glazed window with 5mm thick clear glass and screws, pop rivets, gasket and wool felt etc. Partitions Fully Board Partition with Emboss Decorative Plywood W 48 Natural aluminium partition frame top and bottom with 2.5mm thick emboss laminated plywood boarding both side kept back to back ( Total thickness 5mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Natural aluminium partition frame top and bottom with 3mm thick emboss decorative plywood boarding both side kept back to back ( Total thickness 6mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Full Board Partition with Aluminium Composite Panel W 50 Natural aluminium partition frame top and bottom with 4mm thick pvdf coated aluminium composite both side kept back to back ( Total thickness 8mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Sq.ft. Sq.ft. Sq.ft.

W 49

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 73

W 51

Natural aluminium partition frame top and bottom with 4mm thick polyester coated aluminium composite both side kept back to back ( Total thickness 8mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Glazed & Board Partition with Emboss Decorative Plywood & 5mm Tinted Glass Natural aluminium partition frame top part with 5mm thick clear glass and bottom part with 2.5mm thick emboss laminated plywood boarding both side kept back to back ( Total thickness 5mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Natural aluminium partition frame top part with 5mm thick clear glass and bottom part with 3mm thick emboss decorative plywood boarding both side kept back to back ( Total thickness 6mm ) with necessary pop rivets, gasket and GI channels & etc. work complete in order. Natural aluminium partition frame top & bottom part with 2.5mm thick emboss laminated plywood boarding both side kept back to back ( Total thickness 5mm ) and middle part with 5mm thick clear glass with necessary pop rivets, gasket and GI channels & etc. work complete in order. Natural aluminium partition frame top & bottom part with 3mm thick emboss decorative plywood boarding both side kept back to back ( Total thickness 6mm ) and middle part with 5mm thick clear glass with necessary pop rivets, gasket and GI channels & etc. work complete in order. Fully Glazed Partition with 5mm Tinted Glass

Sq.ft.

W 52

Sq.ft.

W 53

Sq.ft.

W 54

Sq.ft.

W 55

Sq.ft.

W 56

Natural aluminium partition frame top and bottom with 5mm thick tinted glass with necessary pop rivets, gasket & etc. work complete in order. Gypsum Board Partition Fabricating and installing gypsum board partitioning with necessary GI channel member frame work fixed on to wall and floors and 9mm thick gypsum board fixed to both sides of the frame work all completed with board joints taped and finished with gypsum compound to get wall finish. Rate to include for applying one coat of Acrylic filler to boards. Partition Doors Fully Board Partition Doors with Emboss Decorative Plywood

Sq.ft.

W 57

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 74

W 58

Natural aluminium single sash butt hinged openable door with middle rail and fully panelling with 3mm thick emboss decorative plywood on both sides ( Two panels kept back to back ), neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 19 - D21 Natural aluminium single sash sliding door with middle rail and fully panelling with 3mm thick emboss decorative plywood on both sides ( Two panels kept back to back ), neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut, flush bolts, rollers and approved quality lock, door handle with cap nut. As per the members , sizes and details given in Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 19 - D22

Sq.ft.

W 59

Sq.ft.

Glazed & Board Partition Doors with Emboss Decorative Plywood W 60 Natural aluminium single sash butt hinged openable door with middle rail , panelling with 3mm thick emboss decorative plywood on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut and approved quality lock, butt hinges, door handle with cap nut. As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 19 D23 Natural aluminium single sash sliding door with middle rail middle rail , panelling with 3mm thick emboss decorative plywood on both sides ( Two panels kept back to back ) and glazed with 5mm thick clear glass panes, neoprene and wooled beading, gaskets, pop rivets, threaded bar with nut, flush bolts, rollers and approved quality lock, door handle with cap nut. As per the members , sizes and details given in Drawing No:AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 19 D24 Door Pull Handle Supplying and fixing " Hexagon type "stainless steel door pull handle fixed complete to working order.(12" ) Floor Hinge W 63 Supplying & fixing heavy duty floor hinge of Union Brand & Model no. - 8300 or approved equivalent with one year written warranty from authorized agent. Supplying & fixing heavy duty floor hinge of VVP Brand or approved equivalent with one year written warranty from authorized agent. Door closer Nr. Sq.ft.

W 61

Sq.ft.

W 62

Nr.

W 64

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 75

W 65

Supplying & fixing heavy duty door closer of Union Brand & Model no. - 8573 or approved equivalent.***This is necessary where floor hinge used. CEINING Supply and installation of Concealed type metal false ceiling of 600mm x 600mm out of 0.5mm average thickness epoxy powder painted steel sheets ( Paint film thickness of average 80 microns ) suspended to the roof frame work with hot dip galvanized " T " bars of 14mm x 38mm and wall angles of 19mm x 24mm suspended with 4mm dia. galvanized hanger rods.

Nr.

W 66

Sq.ft.

W 67

Supply and installation of Exposed grid type metal false ceiling of 600mm x 600mm out of 0.5mm average thickness epoxy powder painted steel sheets ( Paint film thickness of average 80 microns ) suspended to the roof frame work with hot dip galvanized " T " bars of 14mm x 38mm and wall angles of 19mm x 24mm suspended with 4mm dia. galvanized hanger rods.

Sq.ft.

IRON GRILL W 68 Supply , fabrication and installation of welded Diamond shaped Iron grill, consisting 20mm x 6mm thick flat iron frame and 5mm dia M.S. rods at 3" centers to form 3" x 6" diamond shape grill. Rate shall include for fixing with No.10, 1" counter sunk iron screws and application of two coats of Anti- Corrosive paint. (Based on 2'-0"x4'-0" area) Details as per the Drawing No:- AR/DETAIL DRG/2011/08/22Type 1 Supply , fabrication and installation of welded Diamond shaped iron grill, consisting 20mm x 6mm thick flat iron frame, mullions and isolated mid rails without intermediate joints, 5mm dia. M.S. rods welded to form 3" x 6" diamond shaped isolated panels. Rate shall include for fixing with No.10, 1" counter sunk iron screws and application of two coats of Anti-Corrosive paint.(Based on 9'-0"x6'-0" area) Details as per the Drawing No:- AR/DETAIL DRG/2011/08/22Type 2 Sq.ft.

W 69

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 76

W 70

Supply , fabrication and installation of welded openable Iron grill door and fixed Iron grill to window. The door frame fabricated with 38mm x 38mm x 6mm thick angle iron to an over-all size of 3'-0" x 9"-0" high inclusive of 2'-3" high Iron grill on top formed with 5mm dia. m.s.rods welded to form 3" x 6" diamond shape. Door sash outer frame fabricated with 25mm x 25mm x 3mm thick hollow sections and two cross members, top part of the sash fixed with 5mm dia. m.s.rods welded to form 3" x 6" diamond shape and bottom part fixed with gauge 22 G.I. sheet, sash fixed to the frame with 3 No. 4" x 3" M.S. butt hinges and locking arrangement comprising of a Iron tower bolt and Hasp & plate. The fixed window grill fabricated with 20mm x 6mm thick flat iron outer frame and two mullions, 5mm dia. m.s.rods welded to form 3" x 6" diamond shape, All details as per Drawing No:AR/DETAIL DRG/2011/08/22- Type 3 Rate shall include the formation of 9" x 9" x 6" holes to insert the door frame legs filled with grade 20 concrete , application of two coats of anti-corrosive paint and one coat of enamel paint.

Sq.ft.

W 71

Supply , fabrication and installation of welded openable Iron grill door without window. The door frame fabricated with 38mm x 38mm x 6mm thick angle iron to an over-all size of 3'-0" x 9"-0" high inclusive of 2'3" high Iron grill on top formed with 5mm dia. m.s.rods welded to form 3" x 6" diamond shape. Door sash outer frame fabricated with 25mm x 25mm x 3mm thick hollow sections and two cross members, top part of the sash fixed with 5mm dia. m.s.rods welded to form 3" x 6" diamond shape and bottom part fixed with gauge 22 G.I. sheet, sash fixed to the frame with 3 No. 4" x 3" M.S. butt hinges and locking arrangement comprising of a Iron tower bolt and Hasp & plate. All details as per Drawing No:- AR/DETAIL DRG/2011/08/22- Type 3 Rate shall include the formation of 9" x 9" x 6" holes to insert the door frame legs filled with grade 20 concrete , application of two coats of anti-corrosive paint and one coat of enamel paint.

Sq.ft.

W 72

Welded Iron grill of rectangular pattern , consisting of a flat Iron frame of 25mm x 6mm thick with out intermediate joints, 2 nos of 25mm x 6mm thick horizontal members , 12mm dia. M.S. round bars as vertical members @ 4" c/c , vertical round bars to be drilled through horizontal flat Irons, fixed complete with counter sunk screws and rawl plugs to the masonry opening or timber. Rate shall include for applying two coats of anti-corrosive paint and two coats of enamel paint. ( for window openings of size 2'-0" x 4'-0" ). Details as per the Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 05

Sq.ft.

COLLAPSIBLE DOOR

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 77

W 73

Fabricating and Installation of open type collapsible Iron door consisting with 20mm x 6mm flat iron codling cover and necessary screws, etc.. Rate shall include for applying two coats of anti-corrosive paint. ROLLER SHUTTERS & ROLLER DOORS

Sq.ft.

W 74

Supply and fixing natural aluminium roller shutter consisting aluminium slats to the thickness of 1.2mm, centre bar, pulleys, side plate with the racers, fabricating the mechanical box with M.S. square tubes and covering the box and fixing on site with the bottom bars and necessary U channels. ( Approx. Size: 10'-6" width x 9'-8" high ) Supply and fixing powder coated zinc alum roller doors consisting heavy duty powder coated aluminium slats bearing a thickness of 1.2mm and height of the slat to be 83mm, centre bar, pulleys, springs, dust seal, nylon strip, side plate with the racers & work complete in order. Supply and fixing the motor with two remotes for the roller shutter & roller door. MILD STEEL BALUSTRADE

Sq.ft.

W 75

Sq.ft.

W 76

Item

W 77

Supplying , fabricating & fixing mild steel and timber hand rail, consisting of 16mm M.S. round bars @ 4" c/c as vertical members fixed to steps with the 8" x 1 1/2" x 12mm thick M.S. plate connecting with 2 nos of 10mm anchor bolts, 4" x 2" approved timber rail fixed to 30mm x 6mm flat iron align to the stair & 20mm x 6mm flat iron as the horizontal members to connecting the two vertical members finished smooth and work complete in order with necessary nuts & bolts. Rate Shall include for applying two coats of anti-corrosive paint and two coats of enamel paints. All sizes & details as per Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 03 - Type 1-A Supplying , fabricating & fixing mild steel and timber hand rail, consisting of 16mm M.S. round bars @ 4" c/c as vertical members fixed to steps with the 8" x 1 1/2" x 12mm thick M.S. plate connecting with 2 nos of 10mm anchor bolts, 4" x 2" approved timber decorative rail fixed to 30mm x 6mm flat iron align to the stair & 20mm x 6mm flat iron as the horizontal members to connecting the two vertical members finished smooth and work complete in order with necessary nuts & bolts. Rate Shall include for applying two coats of anti-corrosive paint and two coats of enamel paints. All sizes and details as per Drawing No:- AR/DETAIL DRG/2010/01/10 & Sheet No. 03 - Type 1-B

L.ft.

W 78

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 78

W 79

Supplying , fabricating & fixing GI pipe hand rail, consisting of 2" dia. GI pipe as hand rail and 3/4" dia. GI pipes @ 11" c/c as vertical members fixed to steps with the 4" x 1 1/2" x 12mm thick M.S. plate connecting with 2 nos of 10mm anchor bolts, work complete in order with necessary nuts & bolts. Rate Shall include for applying two coats of anti-corrosive paint and two coats of enamel paints. All sizes and details as per Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 04 - Type 2 Supplying , fabricating & fixing GI pipe hand rail top of the 9" thick brick wall ( Brick work measured separately ) consisting of 2" dia. GI pipe as hand rail and fixed to wall with 30mm x 6mm flat iron @ 18" c/c work complete in order. Rate Shall include for applying two coats of anti-corrosive paint and two coats of enamel paints. All sizes and details as per Drawing No:AR/DETAIL DRG/2010/01/10 & Sheet No. 04 - Type 3 Fabricate, supply and fix stainless steel pipe hand rail at staircase comprising 1 1/4" dia. uprights at 1'-0" c/c, 2" dia. top rail and 1" dia. middle rail. Uprights fixed to steps with 100 x 100 x 8mm thick S.S. base plate with 8mm dia. S.S. nuts and bolts complete as per working order. Y - STRUCTURAL STEEL WORK
Supplying and fixing 50mm x 50mm x 6mm thick angle iron purling at maximum spacing of 4'-0" centers up to maximum span of 10'-0" including nuts, necessary bolds & washers etc. and application of two coats of Anti-Corrosive paint. Supplying and fixing 65mm x 65mm x 6mm thick angle iron purling at maximum spacing of 4'-0" centers maximum span of 11'-0" (not less than 10'-0") for a asbestos purling roof without covering tiles on top. Rate shall include for necessary nuts, bolds & washers,etc. and applying two coats of Anti-Corrosive paint. Supplying and fixing 75mm x 75mm x 6mm thick angle iron purling at maximum spacing of 4'-0" centers maximum span of 12'-0" (not less than 11'-0") for a asbestos purling roof without covering tiles on top. Rate shall include necessary nuts, olds & washers etc, and applying two coats of Anti -Corrosive paint. Supplying and fixing 100mm x 50mm x 6mm thick channel Iron purling up to 14'-0" span at 4'-0" c/c. Rate shall include for applying two coats of anti-corrosive paint. Supplying and fixing 125mm x 65mm x 6mm thick channel Iron purling up to 16'-0" span at 4'-0" c/c. Rate shall include for applying two coats of anti-corrosive paint. Supplying and fixing 150mm x 75mm x 6mm thick channel Iron purling up to 18'-0" span at 4'-0" c/c. Rate shall include for applying two coats of anti-corrosive paint.

L.ft.

W 80

L.ft.

W 81

L.ft.

Y 01

L.ft.

Y 02

L.ft.

Y 03

L.ft.

Y 04

L.ft.

Y 05

L.ft.

Y 06

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 79

Y 07

Supply, installation and fixing of angle iron sleepers over the walls to support purling formed with 50mm x 50mm x 6mm thick angles welded back to back with 75mm x 50mm x 10mm thick separators @ 2'-0" c/c, fixed to the concrete pad laid on the wall with 9" x 6" x 10mm thick base plate and 2 No. 10mm dia. bolts @ 6'-0" c/c. Rate shall include for applying two coats of anti-corrosive paint and one coat of enamel paint. Supply, installation and fixing of angle iron sleepers over the walls to support purling formed with 65mm x 65mm x 6mm thick angles welded back to back with 75mm x 65mm x 10mm thick separators @ 2'-0" c/c, fixed to the concrete pad laid on the wall with 9" x 6" x 10mm @ 6'-0" c/c. thick base plate and 2 No. 10mm dia. bolts. Rate shall include for applying two coats of anti-corrosive paint and one coat of enamel paint. Supply, installation and fixing of angle iron sleepers over the walls to support purling formed with 75mm x 75mm x 6mm thick angles welded back to back with 75mm x 75mm x 10mm thick separators @ 2'-0" c/c, fixed to the concrete pad laid on the wall with 9" x 6" x 10mm thick base plate @ 6'-0" c/c.and 2 No. 10mm dia. bolts. Rate shall include for applying two coats of anti-corrosive paint and one coat of enamel paint.

L.ft.

Y 08

L.ft.

Y 09

L.ft.

Mild steel Roof truss Y 10 Mild steel Roof truss for Calicut tile roofing 20'-0" (6.0m) span centre to centre, Maximum spacing 10'-0" , 250 pitch maximum and 180 pitch minimum, with 4'-0" wide eaves at both sides. Consisting of 2 Nos. 50mm x 50mm x 6mm thick angles as top and bottom chords, 1 No. 50mm x 50mm x 6mm thick angles as struts & ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:- WP/TYPE/STR/2011/RT1. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint. Nr.

Y 11

Mild steel Roof truss for Asbestos roofing 20'-0" (6.0m) span centre to 0 centre, Maximum spacing 10'-0", 12 pitch with 3'-6" wide eaves at both sides. Consisting of 2 Nos. 50mm x 50mm x 6mm thick angles as top and bottom chords, 1 No. 50mm x 50mm x 6mm thick angles as struts & ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:WP/TYPE/STR/2011/RT2. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint.

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 80

Y 12

Mild steel Roof truss for Calicut tile roofing 25'-0" (7.5m) span centre to centre, Maximum spacing 10'-0", 250 pitch maximum and 180 pitch minimum, with 4'-0" wide eaves at both sides. Consisting of 2 Nos. 50mm x 50mm x 6mm thick angles as top and bottom chords, 1 No. 50mm x 50mm x 6mm thick angles as struts & ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:- WP/TYPE/STR/2011/RT3. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint.

Nr.

Y 13

Mild steel Roof truss for Asbestos roofing 25'-0" (7.5m) span centre to 0 centre, Maximum spacing 10'-0", 12 pitch with 3'-6" wide eaves at both sides. Consisting of 2 Nos. 50mm x 50mm x 6mm thick angles as top and bottom chords, 1 No. 50mm x 50mm x 6mm thick angles as struts & ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:WP/TYPE/STR/2011/RT4. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint. Mild steel Roof truss for Calicut tile roofing 30'-0" (9.0m) span centre to centre, Maximum spacing 10'-0", 250 pitch maximum and 180 pitch minimum, with 4'-0" wide eaves at both sides. Consisting of 2 Nos. 65mm x 65mm x 6mm thick angles as top and bottom chords, 2 Nos. 50mm x 50mm x 6mm thick angles as struts , 1 No. 65mm x 65mm x 6mm thick angles as ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:- WP/TYPE/STR/2011/RT5. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint.

Nr.

Y 14

Nr.

Y 15

Mild steel Roof truss for Asbestos roofing 30'-0" (9.0m) span centre to centre, Maximum spacing 10'-0", 120 pitch, with 3'-6" wide eaves at both sides. Consisting of 2 Nos. 65mm x 65mm x 6mm thick angles as top and bottom chords, 2 Nos. 50mm x 50mm x 6mm thick angles as struts , 1 No. 65mm x 65mm x 6mm thick angles as ties, 10mm thick gusset plates, base plates & sole plates, mild steel rag bolts, purling cleats, etc.. & all details as per the Drawing No:WP/TYPE/STR/2011/RT6. Rate shall include for fabricating , transporting , hoisting , fixing in position and applying two coats of Zinc Phosphate paint. Steel Scaffolding Set

Nr.

Y 16

Supplying and erecting steel scaffolding sets. Rate to include for dismantling same after completion of work.

Set per day

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 81

Zinc Alum Roofing Y 17 Y 18 Supplying and fixing zinc aluminium colour bond standard ridge cap to existing sheet roof using new fasteners. Supply and fix proprietary coated zinc alum gutter (minimum base metal thickness of sheet 0.4mm and minimum total thickness 0.47mm) complete with end caps, running joints etc. All joints to be properly connected with an adequate side laps not less than 225mm length and with sealant to ensure water tightness along the entire length of the gutter and including angle iron gutter brackets 25mm x 25mm x 3mm at 450mm centers with an adequate slope as directed and including application of two coats of each anticorrosive paint and enamel paint to all steel surfaces to match the gutter fix in position.( Inner size of 150mm x 175mm ) Supply and fix proprietary coated zinc alum square down pipe (minimum base metal thickness of sheet 0.40mm and minimum total thickness 0.47mm) complete with necessary socket , elbow & bend. All joints to be properly connected and with sealant to ensure water tightness along the entire length. Down pipe brackets @ 1.0m c/c . Colour bonded wall cladding 0.40mm thick fixed to external wall boxed out at down pipes including sills, flashing, removable sections at access points such as cleaning eyes etc. completely covering the surface as directed by the Engineer. Supply and fix Composite wall cladding of 0.4mm thickness including inner frame work to vertical walls up to 30'-0". Rate shall include for scaffolding. Supply and lay 3mm thick double sided aluminium foil heat reflecting material to underside of roof, supported with Gauge 18, 3" x 3" GI mesh and complete to working order. Rate shall include for scaffolding. L.ft. L.ft.

Y 19

L.ft.

Y 20

Sq.ft.

Y 21

Sq.ft.

Y 22

Sqr.

Y 23

Supply and fix zinc alum profile roofing sheet (minimum base metal thickness of 0.4mm) and minimum thickness of 0.47mm, laid on existing purlings with joints to be properly connected with an adequate side lap to ensure water tightness along the entire length and complete to working order. Supply and fixing high tensile Galvanized iron "C" channels of 100 x 50 x 15 x 2.0mm thick Supply and fixing high tensile Galvanized iron "C" channels of 125 x 60 x 20 x 2.0mm thick Supply and fixing high tensile Galvanized iron "C" channels of 150 x 65 x 20 x 2.0mm thick

Sqr.

Y 24

L.ft.

Y 25

L.ft.

Y 26

L.ft.

Z - MAINTANANCE WORK

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 82

Demolishing
Z 01 Z 02 Z 03 Z 04 Z 05 Z 06 Z 07 Z 08 Z 09 Z 10 Z 11 Z 12 Z 13 Z 14 Z 15 Z 16 Demolishing reinforced cement concrete in suspended floors up to 4" thick , removing reinforcement and clearing debris. Demolishing cement concrete and clearing debris in floors from 4" to 6" thick floors. Demolishing reinforced cement, concrete in lintol of 9" x 6" removing reinforcement and clearing debris. Demolishing reinforced cement, concrete in lintol of 4 1/2"x 6" removing reinforcement and clearing debris. Demolishing brick piers, stacking brick and clearing debris away. Demolishing 9" thick brick walls stacking brick and clearing debris away. Demolishing 4 1/2" thick brick walls stacking brick and clearing debris away. Demolishing 3" thick brick paved floors and clearing debris away. Demolishing drains and clearing debris away. Demolishing rubble masonry built in cement and sand, stacking rubble and clearing debris away. Demolishing floor tiles and clearing debris away. Demolishing wall tiles and clearing debris away. Chipping cement rendering and clearing debris away. Chipping cement plastering and clearing debris away. Chipping lime plastering and clearing debris away. Chipping cement plaster in soffits and clearing debris away. Cube Cube L.ft. L.ft. Cube Cube Sqr. Sqr. L.ft. Cube Sqr. Sqr. Sqr. Sqr. Sqr. Sqr.

Masonry work - Small Quantities Up to 1 Square
Z 17 Z 18 Z 19 4 1/2" thick brick work in cement and sand 1:5 up to a 1 square. 1/2" thick Rendering in cement and sand 1:3 up to a 1 square finished smooth with neat cement slurry and colour pigments. 5/8" thick Plastering to walls in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 up to a 1 square finished semi-rough with wooden float. (Sand to be sieved). 5/8" thick Plastering to walls in cement, lime or equivalent chemical product (Febmix) and sand 1:1:5 up to a 1 square finished smooth with lime putty. (Sand to be sieved). Sqr. Sqr. Sqr.

Z 20

Sqr.

Roof work
Z 21 Z 22 Removing and stacking calicut tile or half round tile from roof in single storied building. Removing and stacking calicut tile or half round tile from roof in two storied building. Sqr. Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 83

Z 23 Z 24 Z 25 Z 26 Z 27

Removing and stacking calicut tile or half round tile from roof in three storied building. Removing and stacking corrugated asbestos sheet from roof in single storied building. Removing and stacking corrugated asbestos sheet from roof in two storied building. Removing and stacking corrugated asbestos sheet from roof in three storied building. Removing roof tiles/asbestos sheets and timber frame work, stacking serviceable materials and clearing debris away in single storied building. Removing roof tiles/asbestos sheets and timber frame work, stacking serviceable materials and clearing debris away in two storied building. Removing roof tiles/asbestos sheets and timber frame work, stacking serviceable materials and clearing debris away in three storied building. Removing and stacking calicut ridge tile. Removing and stacking asbestos ridging. Removing 2" x 1" reepers , 2" x 2" battens ,stacking at site and clearing debris away in single storied building. Removing 2" x 1" reepers , 2" x 2" battens ,stacking at site and clearing debris away in two storied building. Removing 2" x 1" reepers , 2" x 2" battens ,stacking at site and clearing debris away in three storied building. Removing 2" x 4" rafters , 4" x 3" wall plates , stacking at site and clearing debris away in single storied building. Removing 2" x 4" rafters , 4" x 3" wall plates , stacking at site and clearing debris away in two storied building. Removing 2" x 4" rafters , 4" x 3" wall plates , stacking at site and clearing debris away in three storied building. Removing 5" x 3" / 5" x 2" purlings , stacking at site and clearing debris away in single storied building. Removing 5" x 3" / 5" x 2" purlings , stacking at site and clearing debris away in two storied building. Removing 5" x 3" / 5" x 2" purlings , stacking at site and clearing debris away in three storied building. Removing and stacking valance/Barge board materials and clearing debris away in single storied building. Removing and stacking valance/Barge board materials and clearing debris away in two storied building. Removing and stacking eaves gutter from roof of single storied buildings. Removing and stacking eaves gutter from roof of two storied building.

Sqr. Sqr. Sqr. Sqr. Sqr.

Z 28

Sqr.

Z 29

Sqr.

Z 30 Z 31 Z 32 Z 33 Z 34 Z 35 Z 36 Z 37 Z 38 Z 39 Z 40 Z 41 Z 42 Z 43 Z 44

L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft L.ft

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 84

Z 45 Z 46 Z 47 Z 48 Z 49 Z 50 Z 51 Z 52 Z 53 Z 54 Z 55 Z 56 Z 57 Z 58 Z 59 Z 60 Z 61

Removing and stacking down pipes from roof of single storied building. Removing and stacking down pipe from roof of two storied building. Removing and stacking G.I. Valley gutter and flashing. Re-laying available calicut tiles on the roof in single storied building. Re-laying available calicut tiles on the roof in two storied building. Re-laying available calicut tiles on the roof in three storied building. Re-laying available asbestos sheets on the roof in single storied building. Re-laying available asbestos sheets on the roof in two storied building. Re-laying available asbestos sheets on the roof in three storied building. Fixing available Reepers with wire nails. Fixing sorted out & cut to required size available timber to roof or other carpentry work. Fixing available corrugated asbestos sheet with hooks , nuts and bolts to roofing. Supply and fixing hooks, nuts & bolts for existing asbestos roof. Ridge tile bedded in lime cement motor 1:1:4 and coloured to match tiles.( Ridge tile available at site ) Fixing of available barge/Valance boards & fascia including cutting and minor repairs. Refixing existing G.I. Valley gutter and flashing including making good. Fixing of existing gutter and down pipe with making goods and including brackets.

L.ft L.ft L.ft Sqr. Sqr. Sqr. Sqr. Sqr. Sqr. L.ft C.ft Sqr. Nr. L.ft L.ft L.ft L.ft

Ceiling work
Z 62 Removing asbestos ceiling including timber frame work, stacking serviceable materials and clearing debris away in single storied building. Removing asbestos ceiling including timber frame work, stacking serviceable materials and clearing debris away in two storied building. Removing ceiling timber frame work,(with out asbestos sheet) stacking serviceable materiel and clearing debris away in single storied buildings. Sqr.

Z 63

Sqr.

Z 64

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 85

Z 65

Removing ceiling timber frame work,(with out asbestos sheet) stacking serviceable materiel and clearing debris away in two storied buildings. Removing existing ceiling sheet stacking materials at the site and clearing debris away. Renewing in small quantities of 6" x 5/8" - 3/4" lunumidella ceiling including scaffolding up to 30'-0" height. Fixing available lunumidella ceiling planks with new wire nails. Supplying and fixing 1 1/2" x 1/2" thick Beading , Halmilla or equivalent, planning & chamfering complete with brass screws.

Sqr.

Z 66 Z 67

Sqr. L.ft

Z 68 Z 69

Sqr. L.ft.

Doors & Windows
Z 70 Removing and stacking door sash only up to 40 S.ft from existing walls. Nr.

Z 71

Removing and stacking door sash only over 40 S.ft from existing walls.

Nr.

Z 72

Removing and stacking door or window frame size up to 40 S.ft from existing walls. Removing and stacking door or window frame size over 40 S.ft from existing walls. Removing and stacking window sash only up to 40 S.ft from existing walls. Removing and stacking window sash only over 40 S.ft from existing walls. Removing and stacking trellis work Removing and stacking glass panes in doors, windows and fanlights.

Nr.

Z 73

Nr.

Z 74

Nr.

Z 75

Nr.

Z 76 Z 77

Sq.ft. Sq.ft.

Z 78

Renewing in short lengths with approved timber in existing door or window frames . Door or window frame altering existing rebate fillet using approved quality timber with screws and fixing available sashes. Fixing available door or window frame. Fixing available door or window sash. Removing damage sashes of door or window and preparing & re-fixing. Supply and fixing Trellis work 1/2" x 1/2" laths with 2" apart diagonally, horizontally or vertically on existing timber framing. Supply and fixing 3mm thick glass panes for the existing door / window or fanlight sashes with approved timber beading.

L.ft.

Z 79

Nr.

Z 80 Z 81 Z 82 Z 83 Z 84

Sq.ft. Sq.ft. Per sash Sq.ft. Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 86

Sanitary
Z 85 Z 86 Z 87 Removing wash basin , sink or urinals including all fittings and making walls good. Removing squatting pan & standing types water closet with plugging sewer connection and repairing the wall & floor. Disconnecting flushing cistern and removing with plugging water connection and making good of all damaged walls, floors & etc. Removing 1/2" to 1 1/2" dia. bib tap or stop cock. Fixing available ball valve. Fixing lavatory type basin to existing brackets. ( Tap , waste pipe and basin are available) Fixing of wash basin, levelling and connecting to existing water connections and making good (Basin, bracket and fittings are available) Nr. Nr. Nr.

Z 88 Z 89 Z 90 Z 91

Nr. Nr. Nr. Nr.

Z 92 Z 93 Z 94

Repairing bib taps and stop cocks by fixing leather washers. Removing & repairing pillar tap and re-fixing to the wash basin carefully without any damaged. Supply & fixing Universal bend of "Rocell" brand & model "Vario Joint" or approved equivalent.

Nr. Nr. Nr.

Painting
Z 95 Z 96 Removing painting from walls and clearing debris away. Removing enamel paint from door or window frame and clearing debris away. Removing paint from painted glass panes with caustic soda solution or other paint remover. Removing water proof treatment or hot bitumen from floors or flat roof and clearing debris away. Painting ceiling beading with two coats of enamel paint. Painting existing ceiling fan with one coat of anti-corrosive paint & two coats of enamel paint including removing corroded scale and wire brushing. Sqr. Sqr.

Z 97

Sq.ft.

Z 98

Sqr

Z 99 Z 100

L.ft Nr.

Electrical
Z 101 Z 102 Z 103 Supply & replacing one gang one way switch without wiring including removing old one. Supply & replacing two gang one way switch without wiring including removing old one. Supply & replacing three gang one way switch without wiring including removing old one. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 87

Z 104 Z 105 Z 106 Z 107 Z 108

Supply & replacing four gang one way switch without wiring including removing old one. Supply & replacing five gang one way switch without wiring including removing old one. Supply & replacing 5 Amp. Switch socket outlet without wiring including removing old one. Supply & replacing 15 Amp. Switch socket outlet without wiring including removing old one. Supply & replacing 13 Amp. Switch socket outlet without wiring including removing old one.

Nr. Nr. Nr. Nr. Nr.

Other
Z 109 Z 110 Z 111 Z 112 Supplying and placing 4" dia.PVC (Type 250) wheep holes. Supplying and placing 2" dia.PVC (Type 400) wheep holes. Removing existing mortice lock repairing and re-fixing. Removing and stacking partitions at site including making good to walls & floors. L.ft L.ft Nr. Sq.ft.

Transporting
Z 113 Transporting debris cleared away from site by tractor (approx.. 10 Miles away). Per Load

Z 114

Transporting debris cleared away from site by 3.5 Cubes capacity heavy vehicle. Rate to inclusive of loading with JCB machine (approx.. 20 Miles away).

Per Load

AA - MISCELLANEOUS

AA 01

Engaging skilled labour services in the trades of fitter, electrician, Per 8 Hour day Per welder, mason, carpenter, bar bender, painter on 8 hour day basis. Person

AA 02

Engaging labour services in un-skilled category of any type of manual Per 8 Hour day Per work on a 8 hour day basis. Person

AA 03

Pumping water using 2" dia. water pump.

Per 8 Hour Day

P.V.C. Coated Chain Link Fence

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 88

AA 04

Supplying & fixing PVC coated G.I. chain link fence (2" x 2") of gauge 10 height of 8'-0" for GI pipe fixed with available 20mm x 6mm flat iron ( GI pipe & flat iron measured separately) complete with tension J bolts and tension cords. Supplying & fixing PVC coated G.I. chain link fence (2" x 2") of gauge 10 height of 10'-0" for GI pipe fixed with available 20mm x 6mm flat iron ( GI pipe & flat iron measured separately) complete with tension J bolts and tension cords. Supplying and fixing 2" dia.x 3.6mm thick Medium quality GI pipe 8'0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement concrete base 1:2:4 (3/4") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain link (chain link measured separately) and fibreglass coping on top. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

Sq.ft.

AA 05

Sq.ft.

AA 06

L.ft.

AA 07

Supplying and fixing 2" dia.x 3.6mm thick Medium quality GI pipe 10'0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement concrete base 1:2:4 (3/4") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain link (chain link measured separately) and fibreglass coping on top. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

L.ft.

AA 08

Supplying and fixing 3" dia.x 4mm thick Medium quality GI pipe 8'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement concrete base 1:2:4 (3/4") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain link (chain link measured separately) and fibreglass coping on top. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

L.ft.

AA 09

Supplying and fixing 3" dia.x 4mm thick Medium quality GI pipe 10'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement concrete base 1:2:4 (3/4") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain link (chain link measured separately) and fibreglass coping on top. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

L.ft.

AA 10

Supplying and fixing 20mm x 6mm flat iron to existing GI pipe (GI pipe measured separately) to fix the chain link, Rate inclusive of drilling 09 Nos. holes of 6mm dia. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint. Supplying and fixing 38mm x 38mm x 6mm angle iron horizontal bracings welded to existing GI pipes. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

L.ft.

AA 11

L.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 89

AA 12

Supplying and fixing 1" dia. x 3.2mm thick GI pipe horizontal bracings welded to existing GI pipes. Rate to include for application of one coat of anticorrosive paint and two coats of enamel paint.

L.ft.

Barbed Wire Fence AA 13 Supplying & fixing 14 gauge galvanized barbed wire 4 points, 3" apart on pre-cast concrete posts with hook bolts including straining. ( Concrete Posts paid separately) Supplying & fixing pre-cast concrete Intermediate Posts of size (5" x 5") - (3" x 3") & 5'-9" high for 7 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete End Posts of size (5" x 5") & 6'-3" high for 7 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" x 3") & 6'-5" high for 7 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Intermediate Posts of size (5" x 5") - (3" x 3") & 6'-9" high for 8 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete End Posts of size (5" x 5") & 7'-3" high for 8 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" x 3") & 7'-5" high for 8 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Intermediate Posts of size (5" x 5") - (3" x 3") & 7'-9" high for 9 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete End Posts of size (5" x 5") & 8'-3" high for 9 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" x 3") & 8'-5" high for 9 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete Intermediate Posts of size (5" x 5") - (3" x 3") & 7'-7" + 1'-6" high for 12 strands including necessary excavation and concreting at the placing. Supplying & fixing pre-cast concrete End Posts of size (5" x 5") & 8'-1" + 1'-6" high for 12 strands including necessary excavation and concreting at the placing. L.ft.

AA 14

Nr.

AA 15

Nr.

AA 16

Nr.

AA 17

Nr.

AA 18

Nr.

AA 19

Nr.

AA 20

Nr.

AA 21

Nr.

AA 22

Nr.

AA 23

Nr.

AA 24

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 90

AA 25

Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" x 3") & 8'-1" + 1'-6" high for 12 strands including necessary excavation and concreting at the placing.

Nr.

AB - LANDSCAPINGS
Turfing Note: Depending on the ground conditions and requirements, turfing shall be decided.Following shall be a guide. (a) When grass areas are meant for human traffic, item AB01c recommend.(ex.Jogging tracks ,sides) (b)For low-end landscaping work item AB01b recommend in continuation with item AB01a (c) For specific areas item AB02 with item AB01a. AB 01a Remove roots and hard graved from the area identified for turfing and level or graded to a uniform surface, spread a 150mm thick layer of top vegetable soil comprisring of a mixture of earth and coir dust mixed in proportion of 2:1 and raked to a depth of 250-300mm while removing hard gravel pieces. AB 01b Supply and placing(laying) buffalo grass turves of size not less than 200mm x 200mm x 75mm and laid closed butted to one another while ensuring lateral joints between turves being staggered, where necessary turves shall be pegged to the soil to prevent movement or slippage.Thereafter, turfing shall be compacted, leveled and maintained for a period of there(3) months by watering, weeding and trimming, untill roots are firmly rooted in to the ground. AB 01c Supplying grass sods of any type grown on any soil and laid on jogging tracks,earth slopes etc; Rate inclusive of levelling the ground and maintaining the same for a period of not less than 3 month . AB 02 Suppling and Planting Blue grass on a prepared surface and maintaining the grass including daily watering, spreading fertilizer, weeding and trimming for a period of months.(Rate for ground preperation shall be paid as per item AB 01a). In case of landscaping work involving, Planting of ball-rooted trees, flower pots and turfing with area of grass turfing under item AB 02 exceeds 2000 sq.ft, follow item may be incorporated. AB 02a Employing a labourer for maintaing the grass ball-rooted trees and flower pots for a period of 3 months. Rate shall include the cost of water, hiring charges for lawn mover/ grass-cutter machine, trimming with hand- held scissors, weeding, re-planting damaged areas and cost of fertilizer. ROOT BOLL PLANTS Per month Sq.ft.

Sq.ft.

Sq.ft.

Sq.ft.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 91

AB 03

Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high Atteria Plant with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high Ehala with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high Araliya Plant with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high Kiripalu Plant with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 7'-0" - 8'-0" high Foxtail Palm with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 8'-0" - 10'-0" high Kentiya Palm with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 6'-0" - 8'-0" high Red Palm with the fertilizing , watering & plant should be maintain for a 1 year period. Supply & Planting maximum 5'-0" girth and 6'-0" - 8'-0" high Queen Palm with the fertilizing , watering & plant should be maintain for a 1 year period. Paving Blocks Natural Colour Blocks - Item No. AB 11 - AB 16

Nr.

AB 04

Nr.

AB 05

Nr.

AB 06

Nr.

AB 07

Nr.

AB 08

Nr.

AB 09

Nr.

AB 10

Nr.

AB 11

Supply & paving 80mm thick Uni-III (Approx. size 210mm x 110mm ) natural colour precast interlocking paving blocks of 40 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Uni-III (Approx. size 210mm x 110mm 2 ) natural colour precast interlocking paving blocks of 30 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour.( Transport cost of blocks paid separately as per BSR item No.AB 23 )

Sqr.

AB 12

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 92

AB 13

Supply & paving 60mm thick Uni-II (Approx. size 210mm x 110mm 2 ) natural colour precast interlocking paving blocks of 15 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Priory-III (Approx. size 200mm x 100mm ) natural colour precast interlocking paving blocks of 40 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Priory-III (Approx. size 200mm x 2 100mm ) natural colour precast interlocking paving blocks of 30 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour.( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 60mm thick Priory-II (Approx. size 200mm x 100mm ) natural colour precast interlocking paving blocks of 15 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Coloured Blocks - Item No. AB 17 - AB 22

Sqr.

AB 14

Sqr.

AB 15

Sqr.

AB 16

Sqr.

AB 17

Supply & paving 80mm thick Uni-III (Approx. size 210mm x 110mm ) coloured precast interlocking paving blocks of 40 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Uni-III (Approx. size 210mm x 110mm 2 ) coloured precast interlocking paving blocks of 30 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 )

Sqr.

AB 18

Sqr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 93

AB 19

Supply & paving 60mm thick Uni-II (Approx. size 210mm x 110mm 2 ) coloured precast interlocking paving blocks of 15 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Priory-III (Approx. size 200mm x 100mm ) coloured precast interlocking paving blocks of 40 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 80mm thick Priory-III (Approx. size 200mm x 2 100mm ) coloured precast interlocking paving blocks of 30 N/mm compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour.( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Supply & paving 60mm thick Priory-II (Approx. size 200mm x 100mm ) coloured precast interlocking paving blocks of 15 N/mm2 compressive strength , on 2" thick compacted sand bed laid on top of a levelled and well compacted earth sub base. Paving blocks should confirming to S.L.S 1425 : Part I & II and subject to the approval of the quality & colour. ( Transport cost of blocks paid separately as per BSR item No.AB 23 ) Transport of Interlocking block CONCRETE CURB

Sqr.

AB 20

Sqr.

AB 21

Sqr.

AB 22

Sqr.

AB 23

Per Block/km

AB 24

Supply & paving pre cast concrete Curb ( Small ) size 75mm x 175mm x 540mm of 25 N/mm2 compressive strength with 1:3 cement mortar on top of a well compacted earth sub base. Supply & paving pre cast concrete Curb ( Half ) size 125mm x 255mm x 450mm of 25 N/mm2 compressive strength with 1:3 cement mortar on top of a well compacted earth sub base. Supply & paving pre cast concrete Curb ( Full ) size 125mm x 255mm x 915mm of 25 N/mm2 compressive strength with 1:3 cement mortar on top of a well compacted earth sub base. CEMENT POTS

L.ft.

AB 25

L.ft.

AB 26

L.ft.

AB 27

Supply & placing of 12" dia. Cement pots 4'-0" high ( size approximate )

Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 94

AB 28 AB 29 AB 30 AB 31

Supply & placing of 18" dia. Cement pots 4'-0" high ( size approximate ) Supply & placing of 24" dia. Cement pots 4'-0" high ( size approximate ) Supply & placing of 28" dia. Cement pots 4'-0" high ( size approximate ) Supply & placing of 48" dia. Cement pots 4'-0" high ( size approximate )

Nr. Nr. Nr. Nr.

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 95

RATE

985.00

1460.00

1635.00

2055.00

3125.00

4075.00

1240.00 2700.00

17000.00

83.00 150.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 96

220.00

140.00 260.00

375.00

1460.00

3400.00 150.00 13480.00

11915.00

11000.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 97

1040.00

315.00

3000.00 4000.00

30.00

35.00

35700.00

8925.00

5900.00

35170.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 98

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 99

44245.00

45570.00

46455.00

46900.00

48310.00

49250.00

410.00

425.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 100

430.00

305.00

315.00

320.00

300.00

310.00

315.00

360.00

370.00

380.00

350.00

375.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 101

610.00

300.00

360.00

480.00

610.00

820.00

1030.00

1990.00

1490.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 102

3530.00

2750.00

1100.00

100.00

16085.00 16570.00 17220.00

325.00 500.00 21750.00 725.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 103

3725.00 13385.00 10000.00 12080.00 15850.00 18735.00 10570.00 11060.00 17115.00

5700.00 5100.00 3700.00

179.00

185.00

188.00

203.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 104

209.00

213.00

3800.00 135.00

32750.00 33780.00 35470.00 36145.00 27595.00 28975.00 29525.00 13670.00 14355.00 14625.00 485.00

9850.00 16850.00 17690.00 18030.00 32025.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 105

33625.00 34265.00 360.00 34705.00 36440.00 37135.00

18725.00

15025.00

10850.00

18440.00

14810.00

140.00 915.00

26940.00

8670.00 380.00 5030.00

5670.00

4995.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 106

4420.00 7140.00

70.00

75.00

71.00

76.00

72.00

77.00

85.00

95.00

87.00

97.00

89.00

99.00

17290.00 17935.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 107

16855.00

255.00 345.00

310.00

240.00

325.00

395.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 108

4825.00 5045.00

130.00

132.00

134.00

6490.00

120.00

123.00

126.00

7550.00

7170.00

100.00 102.00 104.00 12615.00

145.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 109

147.00

149.00

185.00

188.00

191.00

27665.00

31975.00

36305.00

4355.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 110

29760.00

30075.00

30220.00

43270.00

45120.00

39620.00

33530.00

28665.00

29275.00

29945.00

110.00 135.00 47595.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 111

22645.00

24950.00

24890.00

26775.00

33210.00

30710.00

33850.00

29190.00

26485.00

175725.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 112

175725.00

59150.00

59150.00

97580.00

62100.00

52105.00

43460.00

43270.00

38890.00

34270.00

27810.00

605.00 620.00 1385.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 113

990.00 1980.00 1140.00 2280.00 1520.00 2480.00 2310.00 505.00 1180.00 2625.00 4055.00

2545.00 1530.00 2370.00 3030.00 12630.00

3070.00 3300.00 770.00 1160.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 114

1645.00 1325.00 1960.00 2700.00

2620.00 895.00 597.00 1340.00

1000.00

990.00

985.00 970.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 115

550.00

530.00

1010.00

910.00

725.00

690.00

745.00

725.00

280.00

520.00

975.00 960.00 930.00 640.00 710.00 695.00 680.00 590.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 116

2600.00

3135.00

2925.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 117

8230.00 9490.00 5025.00

6135.00

5140.00 2025.00 6195.00 1235.00 1510.00

990.00

1155.00

1385.00

900.00

620.00

1130.00

590.00

815.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 118

1050.00

1550.00

1900.00

270.00 310.00 345.00 950.00 600.00

610.00

920.00

1080.00

550.00 820.00 835.00 560.00 2165.00 2835.00 630.00 73.00 495.00 585.00 1035.00 55.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 119

8070.00 9330.00 290.00 170.00 17150.00 14515.00

8860.00

115.00 85.00

19630.00

290.00 180.00 180.00 185.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 120

1265.00

1020.00

315.00 420.00

1470.00

430.00 1500.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 121

37915.00

25295.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 122

47195.00

28580.00

17810.00

27290.00

25970.00

6940.00

500.00

390.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 123

5740.00

255.00

86.00

50.00

230.00

410.00

825.00 210.00

3000.00

185.00

150.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 124

15650.00

20365.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 125

3260.00

6780.00

17360.00

23395.00

26715.00

35100.00

19245.00

13405.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 126

17850.00

23710.00

8945.00

9835.00

4760.00 3830.00

25135.00

5075.00

1455.00

6480.00

13515.00

21225.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 127

9045.00

21170.00

20000.00 7040.00

14670.00

2480.00

4510.00

3150.00

2120.00

2050.00 1365.00 3750.00 3415.00 4345.00

7560.00

15490.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 128

3325.00

11750.00

42045.00

17420.00

2965.00 16080.00

16080.00

2770.00 3190.00 7430.00

1730.00

5560.00

8220.00

4655.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 129

4740.00

4600.00

600.00 915.00

1200.00 2400.00

530.00 650.00

330.00 325.00 950.00 1020.00 575.00 610.00

1815.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 130

1065.00 1720.00

1525.00

3800.00

1685.00 1940.00 2235.00 5760.00 740.00 1245.00 1800.00 1890.00 3630.00 4880.00 12550.00 20985.00

550.00 875.00 615.00 940.00 545.00 615.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 131

270.00 390.00 405.00 555.00 695.00 1035.00 2500.00 240.00 260.00 8855.00

16120.00

27370.00

64250.00

50.00 80.00 95.00 115.00 150.00 245.00

105.00 125.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 132

180.00 510.00

1060.00

1760.00

600.00 1115.00 530.00

50.00 53.00 53.00 48.00 61.00 53.00 23.00 59.00 64.00 64.00 64.00 72.00 72.00 29.00 73.00 70.00 74.00 79.00 90.00 95.00 30.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 133

94.00 103.00 111.00 110.00 157.00 135.00 33.00 130.00 133.00 143.00 164.00 235.00 211.00 39.00 184.00 197.00 202.00 250.00 402.00 303.00 40.00 385.00 1135.00 363.00 802.00 932.00 1022.00 44.00 546.00 1156.00 651.00 1433.00 1527.00 1730.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 134

96.00 155.00 150.00 146.00 142.00 138.00 122.00 118.00 105.00 96.00 94.00 86.00 79.00 69.00 62.00 56.00 294.00 285.00 283.00 282.00 274.00 188.00 168.00 160.00 141.00 128.00 124.00 102.00 92.00 86.00 73.00 94.00 79.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 135

81.00 88.00 81.00 78.00

1630.00 1160.00 995.00 1080.00 1070.00 1210.00 810.00 1040.00 1350.00 730.00 970.00 815.00 1030.00 1730.00 100.00 130.00 520.00 520.00 475.00 450.00

110.00 190.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 136

65.00 300.00 75.00 320.00 95.00 400.00 95.00 565.00 80.00 80.00 505.00 435.00 270.00 490.00 60.00 215.00 810.00 650.00 725.00 880.00 465.00 695.00 630.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 137

21300.00

6180.00

1000.00 4000.00

2565.00

4070.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 138

6400.00

15930.00

3585.00

4650.00

15760.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 139

14760.00

17690.00

24590.00

31825.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 140

39925.00

53490.00

42465.00

62560.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 141

20970.00

24530.00

37080.00

46620.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 142

62880.00

695.00

7650.00

1650.00 4815.00

30525.00 56125.00 77810.00 71115.00 112750.00 151860.00

159695.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 143

186530.00 210020.00 255640.00 334240.00 529505.00 669420.00 68980.00

28425.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 144

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 145

1680.00

2205.00

2735.00

3280.00

3820.00

2525.00

3290.00

4055.00

4835.00

5615.00

2170.00

2810.00

3460.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 146

4125.00

4785.00

2115.00

2960.00

2750.00

2250.00

2355.00

2740.00

3615.00

4500.00

5395.00

6290.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 147

3565.00

4670.00

5785.00

6910.00

8035.00

3220.00

4210.00

5210.00

6220.00

7220.00

3250.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 148

4095.00

3740.00

3385.00

3205.00

3920.00

4205.00

4765.00

Rate as following formula

2600.00

2740.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 149

3420.00

3565.00

3075.00

3220.00

3955.00

5470.00

5550.00 650.00 10850.00 12400.00 145.00

205.00

85.00 190.00

135.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 150

310.00

305.00

495.00

455.00

745.00

635.00 1100.00 1475.00 3995.00

25.00 30.00 60.00 95.00 145.00 25.00 60.00 90.00 135.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 151

215.00

140.00

25.00 16.00 17.00 18.00 41.00 58.00 66.00 50.00 55.00 210.00 22.00 26.00 45.00 65.00 95.00 24.00 20.00 24.00 28.00 38.00 65.00

1535.00

1550.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 152

1680.00

1925.00

2170.00

5150.00 9870.00 20370.00

4745.00 5480.00 5480.00 6955.00 7515.00 7515.00 7430.00 7440.00 7440.00 9920.00 9920.00 9920.00 14690.00 1245.00 4950.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 153

8840.00 3780.00

10915.00 20140.00 13620.00 20330.00 26920.00 26080.00 34705.00 53760.00 740.00 740.00 3530.00 1730.00 1730.00 3225.00 3680.00 3680.00 5060.00 3915.00 3915.00 6850.00 1265.00 1405.00 2645.00 1965.00 2145.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 154

4010.00 2630.00 3050.00 5470.00

865.00

1350.00

1595.00

4525.00

4400.00

1595.00 1900.00 455.00 950.00 7690.00 14420.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 155

1220.00

2310.00

1080.00

1670.00

1165.00

1795.00

990.00

1605.00

1770.00

2285.00

965.00

1055.00

1090.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 156

1350.00

835.00

1220.00 6920.00

7180.00

7435.00

9485.00

9740.00

9995.00

31200.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 157

4990.00

130.00 215.00 220.00

475.00

6975.00

10150.00

5095.00

9000.00 20000.00 40000.00 60000.00 15000.00 25000.00 50000.00 100000.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 158

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 159

1,665.00

1,550.00

1,680.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 160

1,200.00

1,085.00

1,115.00

2,230.00

1,400.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 161

750.00

2,045.00

1,625.00

1,605.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 162

1,745.00

1,075.00

1,165.00

1,135.00

1390.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 163

715.00

775.00

1400.00

1,275.00

1,240.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 164

1,135.00

1,105.00

1,140.00

1,020.00

910.00

1,235.00

1,120.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 165

1,075.00

1,100.00

1,055.00

1,020.00

1,295.00

1,250.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 166

1,080.00

915.00

865.00

700.00

1,615.00

1,450.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 167

1,730.00

1,510.00

925.00

940.00

935.00

275.00

290.00

2220.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 168

1200.00

385.00

390.00

345.00

355.00

400.00

325.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 169

1050.00

690.00

1085.00

720.00

3650.00

26300.00

9620.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 170

8735.00

400.00

375.00

410.00

320.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 171

460.00

635.00

670.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 172

1200.00

725.00

725.00

33750.00

2040.00

2295.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 173

1785.00

705.00

3700.00

275.00

355.00

395.00

695.00

925.00

1140.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 174

725.00

920.00

1060.00

57235.00

54390.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 175

65050.00

60540.00

99800.00

91090.00

80.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 176

345.00 585.00

480.00

325.00

660.00

6540.00

21370.00

350.00

395.00

430.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 177

18745.00 8565.00 35.00 30.00 1225.00 1470.00 550.00 715.00 25.00 1960.00 1665.00 1350.00 1070.00 735.00 365.00 1100.00

14735.00 5645.00 5710.00

7305.00

475.00 735.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 178

980.00 365.00 490.00 610.00 980.00

1225.00

1470.00

30.00 25.00 5.00 7.00 10.00 10.00 12.00 15.00 15.00 17.00 20.00 10.00 12.00 12.00 20.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 179

12.00 15.00 25.00 490.00 610.00 735.00 790.00 985.00 1180.00 6.00 675.00 1545.00 30.00 100.00 20.00 75.00 35.00

1130.00

1620.00

270.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 180

395.00

640.00 56.00

2230.00 31.00

130.00

200.00

950.00

1425.00

130.00

200.00

13.00 40.00

540.00

2115.00

30.00 21.00 270.00 280.00 235.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 181

320.00 1310.00 1105.00

45.00 130.00 1085.00 1390.00

135.00 225.00 1020.00

490.00 980.00

35.00

1900.00

12.00 560.00

160.00 280.00 395.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 182

520.00 630.00 245.00 550.00 475.00

133.00 102.00 435.00 15.00

3200.00

5500.00

950.00

780.00

2440.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 183

90.00

80.00

675.00

630.00

930.00

880.00

135.00

240.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 184

245.00

14.00

1270.00

2105.00

1395.00

1460.00

2605.00

1540.00

1730.00

2945.00

1670.00

2000.00

3435.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 185

3005.00

100.00

60.00

40.00

130.00

40000.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 186

5400.00

5400.00

5400.00

5400.00

6500.00

3250.00

4300.00

6500.00

30510.00

27190.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 187

23400.00

27935.00

23900.00

21020.00

34300.00

30985.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 188

27190.00

30820.00

26780.00

24475.00

0.13

290.00

420.00

405.00

1400.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 189

2600.00 3400.00 6800.00 9100.00

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 190

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 191

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 192

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 193

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 194

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 195

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 196

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 197

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 198

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 199

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 200

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 201

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 202

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 203

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 204

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 205

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 206

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 207

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 208

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 209

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 210

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 211

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 212

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 213

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 214

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 215

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 216

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 217

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 218

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 219

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 220

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 221

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 222

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 223

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 224

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 225

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 226

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 227

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 228

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 229

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 230

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 231

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 232

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 233

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 234

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 235

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 236

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 237

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 238

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 239

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 240

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 241

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 242

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 243

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 244

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 245

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 246

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 247

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 248

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 249

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 250

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 251

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 252

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 253

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 254

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 255

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 256

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 257

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 258

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 259

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 260

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 261

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 262

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 263

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 264

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 265

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 266

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 267

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 268

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 269

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 270

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 271

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 272

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 273

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 274

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 275

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 276

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 277

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 278

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 279

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 280

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 281

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 282

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 283

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 284

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 285

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 286

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 287

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 288

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 289

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 290

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 291

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 292

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 293

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 294

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 295

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 296

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 297

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 298

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 299

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 300

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 301

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 302

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 303

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 304

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 305

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 306

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 307

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 308

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 309

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 310

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 311

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 312

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 313

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 314

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 315

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 316

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 317

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 318

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 319

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 320

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 321

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 322

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 323

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 324

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 325

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 326

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 327

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 328

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 329

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 330

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 331

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 332

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 333

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 334

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 335

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 336

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 337

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 338

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 339

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 340

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 341

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 342

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 343

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 344

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 345

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 346

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 347

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 348

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 349

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 350

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 351

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 352

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 353

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 354

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 355

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 356

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 357

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 358

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 359

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 360

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 361

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 362

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 363

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 364

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 365

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 366

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 367

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 368

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 369

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 370

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 371

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 372

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 373

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 374

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 375

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 376

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 377

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 378

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 379

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 380

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 381

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 382

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 383

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 384

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 385

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 386

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 387

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 388

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 389

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 390

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 391

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 392

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 393

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 394

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 395

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 396

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 397

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 398

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 399

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 400

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 401

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 402

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 403

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 404

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 405

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 406

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 407

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 408

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 409

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 410

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 411

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 412

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 413

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 414

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 415

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 416

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 417

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 418

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 419

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 420

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 421

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 422

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 423

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 424

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 425

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 426

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 427

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 428

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 429

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 430

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 431

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 432

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 433

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 434

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 435

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 436

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 437

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 438

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 439

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 440

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 441

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 442

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 443

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 444

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 445

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 446

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 447

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 448

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 449

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 450

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 451

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 452

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 453

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 454

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 455

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 456

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 457

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 458

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 459

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 460

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 461

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 462

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 463

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 464

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 465

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 466

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 467

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 468

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 469

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 470

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 471

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 472

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 473

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 474

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 475

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 476

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 477

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 478

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 479

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 480

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 481

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 482

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 483

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 484

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 485

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 486

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 487

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 488

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 489

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 490

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 491

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 492

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 493

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 494

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 495

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 496

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 497

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 498

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 499

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 500

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 501

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 502

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 503

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 504

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 505

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 506

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 507

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 508

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 509

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 510

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 511

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 512

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 513

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 514

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 515

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 516

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 517

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 518

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 519

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 520

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 521

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 522

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 523

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 524

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 525

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 526

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 527

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 528

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 529

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 530

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 531

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 532

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 533

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 534

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 535

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 536

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 537

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 538

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 539

µ±Ì¨±¥àà ¾ª°É°Ìˆ ɳ´¢¸¡ ©ß§± †ò Â綯 - 2005 À°³¢µ 540

Item

Description

.5m - 1.0 m

1m - 5m

5m-10 m

A1

Allow lump sum to construct, furnish and Item maintain Contractor,s site office Allow lump sump to protect materials and plant. Item

10000.00

15000.00

25000.00

A2

3500.00

4500.00

6000.00

A3

Allow lump sump to obtain electricity and Item water for the site. Allow lump sump for the provision of sanitary facilities to be Contractor,s Staff. Allow lump sump to barricade the site with a fence and gate. Item

5300.00

7500.00

12000.00

A4

3200.00

5000.00

5000.00

A5

Item

_

4000.00

4000.00

Allow lump sum for providing a name board of (size to define) and to erect at a7'-0" height. A07 Allow lump sum for insurance , performance bond and guarantee per one million projects #REF! #REF! #REF! #REF! #REF! #REF!

A6

Item

_

_

1500.00

Item

4800.00

_

_

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

10m25m
30000.00

10000.00

15000.00

7000.00

6000.00

1900.00

_

BSR 2013
No. Description #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Unit #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Qty Rate #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Amount #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

BSR 2013
No. b 17 b 16 c 05 c 39 c 42 c 43 c 14 c 11 c 31 c 44 d 06 d 04 d 05 e 04 e 04 e 04 e 04 e 04 e 01 e 01 e 01 e 01 e 01 e 04 f 02 f 08 Description Approved earth supplying within 16 Km from the source and piled at site , Approved hard Earth spreading levelling Batched wateringGrade and manual Volume 20 concrete in footings, beams, lintels, columns and Ready mix concrete of grade 25(25 N/mm2), confirming to SLS 1144-1997, Placing levelling , vibrating the concrete. Pumping charge for quantities up to 30 m3 by pump car. Pre-cast lintols size 4 1/2" x 6" deep in Grade 20lintols concrete, with Pre-cast size reinforced 9" x 6" deep in 2 nos Grade 20 concrete, reinforced with size 3 nos Cement concrete drains of internal 9" wide and depth varies from 6" 9" For more than 30 m3 additional pumping charges. (Rate for every m3 over and Shuttering for Beams/Lintols including dismantling in floor 15mm thick plywood Shuttering for slab including dismantling in columns 15mm thick Plywood Shuttering for including dismantling in 15mm thick Plywood Tor steel reinforcement to slabs, beams, lintols, columns, footings &slabs, etc.. bent to Tor steel reinforcement to beams, lintols, columns, footings &slabs, etc.. bent to Tor steel reinforcement to beams, lintols, columns, footings & etc.. bent to Tor steel reinforcement to slabs, beams, lintols, columns, footings &slabs, etc.. bent to Tor steel reinforcement to beams, lintols, columns, footingsto & slabs, etc.. bent to Mild steel reinforcement beams, lintols, columns, to footings Mild steel reinforcement slabs, & etc.. beams, lintols, columns, footings Mild steel reinforcement to slabs, & etc.. beams, lintols, columns, to footings Mild steel reinforcement slabs, & etc.. beams, lintols, columns, to footings Mild steel reinforcement slabs, & etc.. beams, lintols, columns,to footings & etc.. Tor steel reinforcement slabs, beams, lintols, columns, footings etc..1:8 bent Brick work in cement and& sand in to superwork Structure in ground floor. 1:5 ( 9" Brick in cement and sand in 4 1/2" thick walls in ground #N/A floor. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Unit Cube Cube Cube m3 m3 Item L.ft. L.ft. L.ft. m3 Sqr. Sqr. Sqr. Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Cube Sqr. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Qty Rate 3400 1460 44245 16570 500 21750 305 410 1030 725 18735 12080 15850 203 203 203 203 203 179 179 179 179 179 203 33780 13670 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Amount 26,547.00 579,950.00 17,500.00 21,750.00 7,320.00 14,760.00 65,920.00 3,625.00 224,820.00 283,880.00 2,377.50 23,852.50 49,126.00 182,700.00 61,103.00 227,969.00 6,175.50 10,972.70 68,915.00 139,888.50 53,431.50 79,474.50 160,455.00 99,107.50 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

0.60 35.00 35.00 1.00 24.00 36.00 64.00 5.00 12.00 23.50 0.15 117.50 242.00 900.00 301.00 1123.00 34.50 61.30 385.00 781.50 298.50 391.50 4.75 7.25

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

2,411,620.20

BSR 2013
No. z 82 z 84 p 28 p 16 p 24 p 18 p 32 p 34 n 19 z 66 q 25 q 36 m 18 m 17 k 17 z 19 z 20 v 06 v 07 v 08 v 09 v 10 v 41 v 43 v 48 v 51 v 52 v 165 Description Removing damage sashes of door or windowand andfixing preparing re-fixing. Supply 3mm& thick glass panes for the existing door / window or fanlight Supplying & fixing polished brass hinges of 4" x 2 1/2" thickness 4.0mm 0.2mm Supplying and fixing heavy duty±solid brass casement fastener of or Supplying and fixing solid inclusive brass Door Window pull ring of 1" dia. ( Small ) Supplying and fixing heavy duty solid brass casement stay - 12" inclusive of Supplying & fixing polished brass barrel bolt of 4" with a weight not less than Supplying & fixing polished brass tower bolt of 10" with a notglazed less than Supply & fixing 1 weight 1/8" thick window sash only. Rate without Removing existing ceiling sheet brass stacking materials at the site and clearing debris Asbestos flat ceiling fixed with coves & fillets to valance/barge local Micro (Eucalyptus Timber board in GINISAPUand timber finished size 9" work x 3/4" Preparing painting new wood with primer and two coats paint. Preparing and painting oldenamel wood work with twobands coats 6" of x enamel Plaster 1/2" in paint. cement & sand 1:3 finished semi rough, extra the 5/8" thick Plastering to walls inover cement, lime or equivalent chemical product 5/8" thick Plastering to walls in cement, lime or equivalent chemical product Light point wired through a5 Amp one gang points one way plate switcha using Light wired through 5 Amp two gang points one way plate switcha using Light wired through 5 Amp three gang one way plate switch using Light points wired through a 5 Amp four gang points one way plate switcha using Light wired through 5 Amp. 5 gang one way socket plate switch 5 Amp Switch outlet using wired using 2x1/1.13mm (2x1/044) P.V.C. insulated 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029) insulated copper wire Fan regulator wired through a 5 Amp plateFan one regulator gang onewired way switch using Two through a 5Amp Fan plateregulator two gang one way switch Three wired through a 5Amp plate three gang one way switch 20W CFL lamp with one year warranty Osram , Philips or Approved Equivalent. Unit Per sash Sq.ft. Nr. Nr. Nr. Nr. Nr. Nr. Sq.ft. Sqr. Sqr. L.ft. Sqr. Sqr. L.ft. Sqr. Sqr. Per Point Per Point Per Point Per Point Per Point Nr. Nr. Nr. Nr. Nr. Nr. Qty 88.00 125.00 76.00 45.00 74.00 88.00 24.00 18.00 160.00 14.00 14.00 70.00 2.00 14.80 105.00 1.00 1.00 11.00 25.00 13.00 5.00 5.00 59.00 3.00 15.00 6.00 4.00 107.00 Rate 270 235 600 900 270 1130 550 835 710 640 28580 230 3030 2370 147 5710 7305 2525 3290 4055 4835 5615 3920 4765 3565 3955 5470 950 Amount 23,760.00 29,375.00 45,600.00 40,500.00 19,980.00 99,440.00 13,200.00 15,030.00 113,600.00 8,960.00 400,120.00 16,100.00 6,060.00 35,076.00 15,435.00 5,710.00 7,305.00 27,775.00 82,250.00 52,715.00 24,175.00 28,075.00 231,280.00 14,295.00 53,475.00 23,730.00 21,880.00 101,650.00

v 169 4'-0" long Twin fluorescent lamp fitting , Nr. suspension - opal white/diamond cut diffuser with 2 nos of 36W fluorescent bulbs of "Simy" Brand & Model No:SIYBD240BD or approved equivalent. v 160 Weatherproof IP65 rated wall mounted Nr. cylindrical shaped up down ward light fitting of "Simy" Brand & Model No:SIYWB3027 or approved equivalent.

14.00

2310

32,340.00

14.00

4525

63,350.00

v 157 Inner diameter of 5" recess mounted down light with polished aluminium reflector of "Simy" Brand & Model No:SIYDL125R or approved equivalent.

Nr.

12.00

865

10,380.00

v 60

light set Supplying and wiring 2 x 6mm2 (7/.044") L.ft. PVC/PVC/ Cu cable + 6mm2 (7/.044") earth wire complete to working order excluding conduit/casing Supplying and wiring 4 x 16mm2 L.ft. (7/0.064") PVC/PVC/ Cu cable + 16mm2 (7/.064") earth wire complete to working order excluding conduit/casing Item

464.00

190

88,160.00

v 66

184.00

745

137,080.00

v 191 Provide an earth electrode 6'-0" long , 2" dia. x 3.6mm thick medium duty GI pipe. Rate shall include connection to the main panel, sub main, earth clips& etc. v 105 10-12 ways SP&N Distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) v 104 8-10 ways SP&N Distribution board with thermo plastic frame and door, earth and neutral bars din rail type (protection rating IP40) v 126 60 Amp Four Pole Main Switch v 141 63 Amp Double Pole MCB v 140 40 Amp Double Pole MCB v 115 63Amp, 100 mA Double Pole ELCB (RCCB) 100 mA Double Pole ELCB v 112 40Amp, (RCCB) v 136 6 - 32 Amp Single Pole MCB #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

4.00

4990

19,960.00

Nr.

3.00

1680

5,040.00

Nr.

6.00

1550

9,300.00

Nr. Nr. Nr. Nr. Nr. Nr. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

2.00 3.00 6.00 3.00 6.00 60.00

8840 3225 1730 7515 5480 740 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

17,680.00 9,675.00 10,380.00 22,545.00 32,880.00 44,400.00 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A

#N/A #N/A

#N/A #N/A

#N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

400,485.00

2,059,721.00

BSR 2013
No. z 30 z 21 z 32 q 02 q 34 q 04 q 29 Description Removing and stacking calicut ridge tile. Removing and stacking calicut tile or half round tile from in single storied Removing 2" x roof 1" reepers , 2" x 2" battens ,stacking atcorrugated site and clearing Roof covering with asbestos sheets. (Timber frame work x and ridge Supplying and fixing 45mm 45mm local Micro (Eucalyptus Microcoris) or Ridging with calicut pattern tiles bedded in cement,and limefixing & sand mortar and Supplying 190mm x 1:1:4 94mm , 165mm x 45mm , #N/A 140mm x 94mm , #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Unit L.ft Sqr. L.ft Sqr. L.ft. L.ft. Cu.ft. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Qty 97.00 28.66 2000.00 28.66 900.00 97.00 5.50 Rate 30 475 5 9330 86 170 6940 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Amount 2,910.00 13,613.50 10,000.00 267,397.80 77,400.00 16,490.00 38,170.00 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

97 650 2866

425,981.30

96.83

200 860

600 200

BSR 2013
No. z 30 z 21 z 32 q 02 q 34 q 04 q 29 Description Removing and stacking calicut ridge tile. Removing and stacking calicut tile or half round tile from in single storied Removing 2" x roof 1" reepers , 2" x 2" battens ,stacking atcorrugated site and clearing Roof covering with asbestos sheets. (Timber frame work x and ridge Supplying and fixing 45mm 45mm local Micro (Eucalyptus Microcoris) or Ridging with calicut pattern tiles bedded in cement,and limefixing & sand mortar and Supplying 190mm x 1:1:4 94mm , 165mm x 45mm , #N/A 140mm x 94mm , #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Unit L.ft Sqr. L.ft Sqr. L.ft. L.ft. Cu.ft. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Qty 97.00 28.66 2000.00 28.66 900.00 97.00 5.50 Rate 30 475 5 9330 86 170 6940 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A Amount 2,910.00 13,613.50 10,000.00 267,397.80 77,400.00 16,490.00 38,170.00 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

2.3 13.79 2.77

980 675 9330

2254 9308.25 25844.1 37406.35 28442.7 8963.65 28.45603175

97 650 2866

111.54

255

425,981.30

78

96.83

200 860

600 200

2

62.66 8.83 72.33 8.83 26 7.75

553.2878 638.6739 403 1594.9617

2

62.66 8.58 72.33 8.58 26 7.5

537.6228 620.5914 390 1548.2142

Extra work
No. Description v 11 Light point wired through a 5 Amp one gang one way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. v 12 Light points wired through a 5 Amp two gang one way using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Unit Per Point Qty 3.00 Rate 2170 Amount 6,510.00

Per Point

10.00

2810

28,100.00

v 13 Light points wired through a 5 Amp three Per Point gang one way using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. v 14 Light points wired through a 5 Amp four gang one way plate switch using 2x1/1.13mm(2x1/044)P.V.C. insulated copper wire first half in surface plastic casing & capping and other half in conduit. Per Point

3.00

3460

10,380.00

1.00

4125

4,125.00

v 46 Fan regulator wired through a 5 Amp Nr. plate one gang one way switch using 2x1/1.13 mm P.V.C. insulated copper wire & 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C.conduits. #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

8.00

2740

21,920.00

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

71,035.00 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A

#N/A #N/A #N/A #N/A #N/A