93

Mini Round Railing Clamps with Radius Base NEW!
• • • • For 1/4" (6 mm) Thick Glass Fits 1" (25 mm) Diameter Tubing No Hole Drilling; Pressure Fit Ideal for Small Glass Barriers
AVAILABLE IN BRUSHED STAINLESS AND POLISHED STAINLESS STEEL
Product Code

Mini Round Railing Clamps with Flat Base NEW!
• • • • For 1/4" (6 mm) Thick Glass For Mounting to Flat Surfaces No Hole Drilling; Pressure Fit Ideal for Small Glass Barriers
AVAILABLE IN BRUSHED STAINLESS AND POLISHED STAINLESS STEEL Product Code C-MRF
1-1/16" (27 mm)

C-MRR

1-1/16" (27 mm) 11/32" (9 mm) 19/32" (15 mm) 1-5/32" (29.5 mm) 19/32" (15 mm) 1-5/32" (29 mm)

7/16" (11 mm)

Base View

Front View

Rear View

Side View

Base View

Front View

Rear View

Side View

Stair and Walkway Railing Clamps
AVAILABLE IN POLISHED CHROME, POLISHED BRASS, AND SATIN NICKEL (BRUSHED)
Acute
A B

NEW!
3/8" Clamps
25/64" (10 mm)

52 Degree Slant Acute End Clamp "A"
Use Slant Acute End Clamps on top of glass at high end of slant, or bottom of glass at low end of slant. Clamps at 52 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass.
1-7/8" (47 mm) 1-7/8" (47 mm)

52 Degree Slant Open Center Clamp "B"
Use Slant Open Center Clamps on top or bottom midpoint of slanted glass. Reversible center clamps at 52 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass.
1-7/8" (47 mm) 1-7/8" (47 mm)

Obtuse
C

Closed on Acute Angle End

Angle Open Both Ends

Closed on Obtuse Angle End
A B

41/64" (16 mm)

1/2" Clamps
33/64" (13 mm)
C

D

E C

7/16" (11 mm)
Product Code

7/16" (11 mm)

Reversible Closed One End
D E

Straight Open Both Ends
D

B A

Product Code

C-S52E-12 C-S52E-38

for 1/2" (12 mm) Product Code C-S52O-12 for 1/2" (12 mm) for 3/8" (10 mm) Product Code C-S52O-38 for 3/8" (10 mm)

3/4" (19 mm)

D

E

D

A: Acute End Clamp for Slanted Railings B: Open Center Clamp for Slanted Railings C: Obtuse End Clamp for Slanted Railings D: Straight End Clamp for Level Railings E: Straight Open Center Clamp for Level Railings

90 Degree Straight End Clamp "D"
Use Straight End Clamps on top of glass at end of level run, or bottom of glass at end of level run. Clamps are reversible with 90 degree corners for use with 3/8" or 1/2" (10 or 12 mm) thick glass.
1-7/8" (47 mm)

90 Degree Straight Open Center Clamp "E"
Use Straight Open Center Clamps on top or bottom midpoint of glass on level run. Reversible open center clamps for use with 3/8" or 1/2" (10 or 12 mm) thick glass.
1-7/8" (47 mm) 1-7/8" (47 mm) 3/8" (10 mm)

128 Degree Slant Obtuse End Clamp "C"
Use Slant Obtuse End Clamps on bottom of glass at high end of slant, or top of glass at low end of slant. Clamps at 128 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass.
Product Code Product Code

1-7/8" (47 mm) 1-7/8" (47 mm) 7/16" (11 mm)

1-7/8" (47 mm) 3/8" (10 mm)
Product Code Product Code

C-S128E-12 C-S128E-38

for 1/2" (12 mm) for 3/8" (10 mm)

C-S90E-12 C-S90E-38

for 1/2" (12 mm) for 3/8" (10 mm)

Product Code Product Code

C-S90O-12 C-S90O-38

for 1/2" (12 mm) for 3/8" (10 mm)

Note: Complete the above product codes by adding the desired finish code to the end.

ushorizon.com • Toll Free Phone (877) 728-3874 • Toll Free Fax (888) 440-9567

93