Accepta Dosing & Control Equipment Catalogue for the water treatment, effluent treatment and process industries pH Redox Conductivity Dissolved Oxygen Turbidity Residual Chlorine Level Control Temperature Flow Dosing Dosin g Pumps Mixers Dosing Tanks
Copyright Copyrig ht Accepta Ltd - All rights reserved reserved
AEC-0514-NP1
Contents
Index
Flow Proportional Dosing
Page 18
Accessories for Red Electronic Dosing Pump
Page 38/39
Liquid Level Control
Page 21
Accessories for Motor Driven Dosing Pumps
Page 43
Liquid Level Measurement
Page 22
Actuated valves
Page 48
Mixers PVC Wetted Parts
Page 46
Amperehours meters
Page 28
Mixers Geared
Page 46
Back Plate systems
Page 31
Mixers High Speed
Page 45
Boiler water controllers
Page 33
Open Channel Flow
Page 23
Brominators
Page 32
Peristaltic Pumps
Page 40
Bunds and Tanks
Page 44
pH & Redox Insertion Electrodes
Page 6
Chart Recorders
Page 23
pH & Redox controllers
Page 1
Chlorine Closed Amperometric
Page 17
pH & Redox Transmitters.
Page 2
Chlorine Potentiostatic
Page 15
pH & Redo Redoxx Subm Submer ersi sion on Elec Electr trod ode e syst system emss
Page age 3
Chlorine Open Amperometric
Page 16
pH & Redox Inline Electrode systems
Page 4
Conductivity Controllers
Page 7
pH Replacement Electrodes
Page 5
Conductivity Transmitters
Page 8
pH Simulator & connecting Cables
Page 5
Conductivity Cells
Page 9
Pneumatic Pumps
Page 48
Cond Conduc ucti tivi vity ty Simu Simula lato torr & conn connec ecti ting ng cabl cables es
Page age 10
Storage Tanks
Page 44
Conductivity Control Kits
Page 11
Signal Controllers,
Page 24
Cooling Water Controllers
Page 29/30
Solenoid Valves Brass & Plastic
Page 47
Corrosion Racks
Page 32
Soluti Solution on Streng Strength th & Electr Electrode odeles lesss Conduc Conductiv tivity ity
Page Page 12
Control Valves pneumatic
Page 48
Suspended solids Transmitter
Page 14
Data Loggers/ Paperless recorders
Page 23
Temperature Sensors
Page 19
Dissolved Oxygen Controllers
Page 13
Temperature Controllers
Page 20
Dosing Control & Timers
Page 28
Timers
Page 28
Dosing Pots
Page 34
Turbidity lnstruments
Page 14
Dosing Pumps Electronic Red Series HY & AT
Page 35/36
Transfer Pumps Pneumatic
Page 48
Dosi Dosing ng Pump Pump Elec Electtron ronic Red Acc Accesso essori ries es
Page age 37
Water Meters
Page 25
Dosing Pumps Motor Driven Piston
Page 41
Water Sampler
Page 23
Dosing Pump mpss Motor otor Driven Diap Diaph hragm
Page 42
Dosing Tanks & Bunds
Page 44
Elec Electtrode rodelless ess Cond Conduc ucti tivi vitty Transmi nsmitt tter er
Page age 12
Flow Meters (Electromagnetic)
Page 26
Flow Meters (Paddle Wheel)
Page 27
IMPORTANT NOTE Chemical dosing of hazardous chemicals acid or alkali is dangerous. Accepta Ltd. recommend any pump be installed inside a sealed enclosure and any chemically dosing lines should be installed inside a second chemical resistant tube or pipe. An injection fitting should be shielded so in the unfortunate event of a leakage of any chemical there is no risk whatsoever of persons coming into contact with any chemicals being dosed or mixed. This should also provide mechanical protection for the dosing equipment. The wetted parts of the dosing pumps and hoses are clearly listed, please check with your chemical supplier the suitability of the materials for handling the chemicals in use. Accepta Ltd. or its suppliers accept no liability of our products as being suitable for handling any chemical or mixture of chemicals. For more concentrated chemicals we are able to offer PVDF heads, PTFE ball valves and PVDF dosing hoses.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Contents
Index
Flow Proportional Dosing
Page 18
Accessories for Red Electronic Dosing Pump
Page 38/39
Liquid Level Control
Page 21
Accessories for Motor Driven Dosing Pumps
Page 43
Liquid Level Measurement
Page 22
Actuated valves
Page 48
Mixers PVC Wetted Parts
Page 46
Amperehours meters
Page 28
Mixers Geared
Page 46
Back Plate systems
Page 31
Mixers High Speed
Page 45
Boiler water controllers
Page 33
Open Channel Flow
Page 23
Brominators
Page 32
Peristaltic Pumps
Page 40
Bunds and Tanks
Page 44
pH & Redox Insertion Electrodes
Page 6
Chart Recorders
Page 23
pH & Redox controllers
Page 1
Chlorine Closed Amperometric
Page 17
pH & Redox Transmitters.
Page 2
Chlorine Potentiostatic
Page 15
pH & Redo Redoxx Subm Submer ersi sion on Elec Electr trod ode e syst system emss
Page age 3
Chlorine Open Amperometric
Page 16
pH & Redox Inline Electrode systems
Page 4
Conductivity Controllers
Page 7
pH Replacement Electrodes
Page 5
Conductivity Transmitters
Page 8
pH Simulator & connecting Cables
Page 5
Conductivity Cells
Page 9
Pneumatic Pumps
Page 48
Cond Conduc ucti tivi vity ty Simu Simula lato torr & conn connec ecti ting ng cabl cables es
Page age 10
Storage Tanks
Page 44
Conductivity Control Kits
Page 11
Signal Controllers,
Page 24
Cooling Water Controllers
Page 29/30
Solenoid Valves Brass & Plastic
Page 47
Corrosion Racks
Page 32
Soluti Solution on Streng Strength th & Electr Electrode odeles lesss Conduc Conductiv tivity ity
Page Page 12
Control Valves pneumatic
Page 48
Suspended solids Transmitter
Page 14
Data Loggers/ Paperless recorders
Page 23
Temperature Sensors
Page 19
Dissolved Oxygen Controllers
Page 13
Temperature Controllers
Page 20
Dosing Control & Timers
Page 28
Timers
Page 28
Dosing Pots
Page 34
Turbidity lnstruments
Page 14
Dosing Pumps Electronic Red Series HY & AT
Page 35/36
Transfer Pumps Pneumatic
Page 48
Dosi Dosing ng Pump Pump Elec Electtron ronic Red Acc Accesso essori ries es
Page age 37
Water Meters
Page 25
Dosing Pumps Motor Driven Piston
Page 41
Water Sampler
Page 23
Dosing Pump mpss Motor otor Driven Diap Diaph hragm
Page 42
Dosing Tanks & Bunds
Page 44
Elec Electtrode rodelless ess Cond Conduc ucti tivi vitty Transmi nsmitt tter er
Page age 12
Flow Meters (Electromagnetic)
Page 26
Flow Meters (Paddle Wheel)
Page 27
IMPORTANT NOTE Chemical dosing of hazardous chemicals acid or alkali is dangerous. Accepta Ltd. recommend any pump be installed inside a sealed enclosure and any chemically dosing lines should be installed inside a second chemical resistant tube or pipe. An injection fitting should be shielded so in the unfortunate event of a leakage of any chemical there is no risk whatsoever of persons coming into contact with any chemicals being dosed or mixed. This should also provide mechanical protection for the dosing equipment. The wetted parts of the dosing pumps and hoses are clearly listed, please check with your chemical supplier the suitability of the materials for handling the chemicals in use. Accepta Ltd. or its suppliers accept no liability of our products as being suitable for handling any chemical or mixture of chemicals. For more concentrated chemicals we are able to offer PVDF heads, PTFE ball valves and PVDF dosing hoses.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
pH & Redox Panel Mounting Instruments Panel Mounting Controllers P7335 pH/mV controller feature a 96 x 48 Din enclosure with a very short case length of only only 95 mm idea ideall for for moun mounti ting ng in smal smalll pane panels ls in conf confin ined ed spac spaces es and and is an idea ideall replacemen replacementt instrument instrument when compact compact dimensions dimensions are required. required. Featuring Featuring a switched switched mode power supply 86 - 264 VAC and user selectable pH or Redox millivolt ranges, make this an ideal instrument to hold in stock.
P7335 Series Controllers P7335 P7335 `
pH/m pH/mV V cont contro rollller er in a 96 x 48 Din Din encl enclosu osure re,, rang range e 0 - 14.0 14.00 0 pH or 0 - ±100 ±1000 0 mV with with two two cont contro roll rela elays an ala alarm relay elay with with delay timers logic input & an isolated 0 - 20 / 4 -20mA output mains supply by switched mode power supply 86 - 264 VAC
AK48
Instrument door to IP55 for the P7300 range.
P7635 Series Controllers P7635 P7635
pH/m pH/mV V cont contro rollller er with with a larg larger er disp displa layy in a 96 x 96mm 96mm Din Din enclosure range 0 - 14.00 pH or 0 - ±1000 mV with two control relays an alarm relay with delay timers logic input and an isolated 0 - 20 / 4 -20mA output mains supply by switched mode power supply 86 - 264 VAC
AK96
Instrument door to IP55 for the P7600 range.
P7685 Series Controllers For those applications where precise control is required our P7685 is the ideal partner featuring featuring two proportion proportional al outputs. outputs. PFM pulse frequency frequency modulation modulation for proportional proportional control of our electronic dosing pumps with adjustable set points and proportional band selectable for either one acid and one alkali-dosing pump. Duty and assist acid pumps or duty and assist alkali pumps. PWM pulse width modulation for proportional control solenoid valves as above.
1
P7685 P7685
pH/m pH/mV V cont contro rollller er pane panell moun mounti ting ng with with two two cont contro roll poin points ts on/off, PFM for proportional control of dosing pumps or PWM for proportional control solenoid valves, alarm relay with delay timer and isolated 0 (4) -20 mA current output.
P7685-0 P7685-010 10
pH/mV contr pH/mV controll oller er with with 2 x curren currentt output output for for pH, pH, and or oC, auto clean clean output with with freeze freeze and hold
MTP MTP
Prea Preamp mplilifi fier er for for P768 P7685 5 reco recomm mmend ended ed when when the the elec electr trod ode e is more than 25m from the controller.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
pH & Redox Surface Mounting Instruments Surface Mounting Controllers Accepta’s range of 3600 pH or Redox millivolt controllers and transmitters are available for Din rail mounting or weatherproof surface mounting enclosures.
3600 Series Din Rail Mounting Instruments P364 P3647W 7W
pH Cont Contro rollller er with with 2 set poin points ts with with 0 - 40 sec sec dela delayy timer timer 4 - 20 mA output output in an an IP55 IP55 w’proo w’prooff enclos enclosure ure..
R3647 R3647W W
Redo Redoxx mete meterr ran range ge 0 - 1000 1000 mV mV as P364 P3647 7 Mai Mains ns supp supply ly 115/230 VAC
Two Wire Transmitters P3630P3630-W W
Two wire wire pH pH tra transmi nsmitte tterr isola isolated ted 4 - 20 mA O/P, O/P, powe powerr supply supply 24VDC in IP55 enclosure enclosure..
R3630R3630-W W
Two wire wire mV. tra transm nsmitt itter er isolat isolated ed 4 - 20 mA O/P O/P,, powe powerr supply supply 24VDC in IP55 enclosure enclosure..
-W
W’pr W’proo ooff encl enclos osur ure e for for 3600 3600 seri series es inst instru rume ment ntss if not required required <deduct> <deduct>
P7335-W & P7635-W Controllers As the 7635 & 7335 instruments feature a very short case length of only 95 mm they are ideal for mounting in compact surface mounting enclosures. P7335P7335-W W
pH/mV pH/ mV contro controlle llerr in surfac surface e mounti mounting ng enclos enclosure ure
P7635P7635-W W
As P7335-W P7335-W but with with the larger larger P7635 P7635 contro controlle llerr
MO5-pH & MO5-mV Controllers MO5-pH MO5-pH & MO5-mV are pH and Redox controllers controllers in IP65 surface surface mounting enclosure enclosure.. Featuring on/off or proportional controls isolated current outputs and a switch mode power supply 100 to 240 VAC 50 / 60 Hz.
MO5-pH MO5-pH
pH contro controlle llerr in surfac surface e mounti mounting ng IP65 IP65 enclos enclosure ure range range 0 - 14.00 pH with two control relays an alarm relay with delay timers flow sensor input and two isolated 4 -20mA output mains supply by switch mode power supply 100 to 240 VAC 50 / 60 Hz.
MO5-mV MO5-mV
As MO5-pH MO5-pH but redox redox milliv millivolt oltss rang range e 0 - 2000 mV mV..
-DL
Bui Built in in da data lo logger logs ogs to to SD SD card wh which is is in installed in inside the instrument add
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
2
pH & Redox Electrode Systems Dip Electrode Systems Dip or submersion submersion electrodes electrodes are designed to be submerged into unpressuris unpressurised ed vessels, tanks, sumps or pits for use in industrial wastewater treatment or process control where continuous pH or Redox monitoring is required. The P36 & R36 are supplied 36” long and have fixed electrodes which canot be replaced, the PS90S & RS90S can be made any length up to 3m long and have replacable electrodes.
P36P36-10 10B B R36R36-10B 10B
Disp Dispos osab able le seal sealed ed pH dip dip syst system em in PVC. PVC. 900 900 mm long long Disp Dispos osab able le seale sealed d Redo Redoxx dip dip syste system m in P.V.C .V.C.. 900 mm
PS90 PS90S S
Dip Dip pH ele electro ctrod de syst system em in PVC. VC. 1000 1000 mm long long with with sealed glass electrode and mounting mounting flange
RS90 RS90S S
Dip Dip Redo Redoxx mil milliv livolt olt syst system em in PVC. VC. 1000 1000 mm long long with with sealed platinum electrode and mounting flange
AS90S
Dip Antimony system in PVC. 1000 mm long with sealed antimony electrode and mounting flange
PTT9 PTT90S 0S
Dip Dip pH elec electr trod ode e syst system em in PVC. PVC. 1000 1000 mm long long with with pH electrode and magna flow liquid junction
RTT90S T90S
Dip Dip Redo Redoxx mV elec electr trod ode e syst system em in PVC. PVC. 1000 1000 mm long long with with pH elec electr trod ode e and and magn magna a flow flow liqu liquid id junc juncti tion on
ACS
Auto Clean spray adapter in PVC for air blast cleaning add
PTT1 PTT100 00S S
Dip Dip pH elec electr trod ode e syst system em in PVDF PVDF 900 900 mm long long with pH elec lectrode fitted ted AT ATC & 5 m cable
RTT1 RTT100S 00S
Dip Dip Redo Redoxx mill milliv ivol oltt elec electr trod ode e syste system m in PVDF PVDF 900 900 mm long ong with platinum elect ectrode
Replacement Electrodes Electrode insert with fixed length of cable which screws into the bottom of the electrode dip or riser tube
3
PS18 PS1833-20B 20B RS183 RS183-2 -20B 0B AS183-20B
PS90S PS90S pH elec electr trod ode e inse insert rt 6m cabl cable e & BNC BNC plug plug RS90S RS90S Redo Redoxx elec electr trod ode e inse insert rt 6m cabl cable e & BNC BNC plug plug AS90S Antimony electrode insert 6m cable & BNC plug
PTT183 PTT183-20 -20B B RTT18 RTT183-2 3-20B 0B
PTT90 PTT90S S pH electr electrode ode insert insert 6m cable cable & BNC plug plug RTT90S RTT90S Redox Redox electr electrode ode insert insert 6m cabl cable e & BNC plug plug
PTT2 PTT28383-20B 20B RTT2 RTT28383-20B 20B
PTT1 PTT100S 00S pH elec electr trod ode, e, inser insertt ATC in kyna kynarr 6m cabl cable e RTT10 RTT100S 0S mV elec electr trod ode, e, inser insertt in kyna kynarr 6m cabl cable e
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
pH & Redox Electrode Systems Inline Electrode Systems Inline electrodes are for use where the electrode is to become part of the pipework usualy installed in a “Tee” the pipe should be fitted with isolating and drain valves for safe & easy removal of the electrode for calibration. In installations where this is not possible the Lock N-Load electrode system should be used as this electrode system seals its self on removal from the pipe or vessel. PES 1-QR
Flow line system 3/4” in P.V.C. tee with quick release fitting & 9069 glass combination pH electrode.
RES 1-QR
Flow line system 3/4” in P.V.C. tee with quick release fitting & 9065 platinum combination redox electrode.
PES 2-QR
Flow line system 2” in P.V.C. tee with quick release fitting & PTT183-20B electrode.
RES 2-QR
Flow line system 2” in P.V.C. tee with quick release fitting & RTT183-20B platinum redox electrode.
PES3
Electrode holder in 316 stainless steel for greater mechanical strength and high temperature use in the Dairy and Brewing industries use 9044-10B electrode.
LNL-P
Lock-n-load on line retractable pH electrode holder in PVC. 1 1/2'' BSP with DJ. combination pH electrode
LNL-R
Lock-n-load on line retractable redox electrode holder in PVC. 1 1/2'' BSP with DJ. combination mV electrode
LNL-K-P
Lock-n-load on line retractable pH electrode holder in Kynar. 1 1/2'' BSP with DJ. combination pH electrode
LNL-K-R
Lock-n-load on line retractable redox electrode holder in Kynar. 1 1/2'' BSP with DJ. combination mV electrode
LNL-SS-P
Lock-n-load on line retractable pH electrode holder in 316 stainless steel. 1'' BSP with DJ. combo pH electrode
LNL-SS-R
Lock-n-load on line retractable redox electrode holder in 316 stainless steel. 1'' BSP with DJ. combo mV electrode
Replacement Electrodes 9015-10B 9016-10B
9069-10B 9065-10B
pH combination electrode for PES1-QR plastic bodied with 3 metre cable Redox electrode for RES1-QR Plastic bodied with 3 metre cable pH electrode for PES1-QR glass bodied with 3 metre cable Redox electrode for RES1-QR glass bodied with 3 metre cable
9044-10B
Peripheric DJ. high temp domed glass pH electrode with 3 metre cable
9392-10B
Long body glass combination pH electrode for Lock-n-load DJ.
9386-10B
Long body glass combination Redox electrode for Lock-n-load DJ.
-SS
Stainless Steel sheath on L-N-L electrode (add).
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
4
pH & Redox Electrode Systems Series 9000 Replacement Electrodes Our 9000 series of electrodes are traditional glass bodied electrodes 110 mm long by 12 mm Ø fitted with 3 m connecting cable. The cap is in ryton with a small flange for mounting the electrode into our PES style holders. The 9000 series electrodes maybe used as replacements for many OM electrodes often out performing the original electrodes. 9015-10B 9016-10B
Epoxy bodied pH combination electrode with 3 m cable Epoxy bodied mV combination electrode with 3 m cable
9069-10B 9065-10B
Glass bodied pH combination electrode with 3 m cable Glass bodied Redox combination electrode with 3 m cable
9093-10B
Peripheric junction pH combination electrode with 3 m cable
9092-10B
Peripheric DJ. pH combination electrode with 3 m cable
9072-10B
Low conductivity water pH electrode with 3 m cable
9044-10B
Peripheric DJ. high temp. pH electrode with 3 metre cable
9086-10B
Peripheric junction DJ. Redox electrode with 3 metre cable
9392-10B 9386-10B -SS
Long body combination pH electrode for Lock-n-load DJ. Long body combination Redox electrode for Lock-n-load DJ. Stainless Steel sheath on L-n-L electrode (add).
Euro Style Electrodes 9015- S8 9016- S8
Plastic bodied pH combination electrode with S8 connector Plastic bodied Redox combo electrode with S8 connector
9069- S8 9065- S8
Sealed combination pH electrode with S8 connector Sealed combination Redox electrode with S8 connector
9001098 - 10T
Lead assembly for S8 connector stripped and tinned
Accessories pH - Ex LMK1 PJ - B LMK3
Extension cables ready made up & tested with connectors. Special low noise pH extension cable cost per metre length W’proof pH J-box with for use with ATC electrodes pH extension cable with ATC cost per metre length
Simulators APS2 AIS1
5
Accepta. Instruments pH and mV simulator Accepta. Instruments current simulator 0 - 22 mA in 12 steps
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
pH & Redox Electrodes Insertion Electrodes Our insertion electrodes are designed to screw directly into a pipe or vessel which can be easiIy isolated or drained for electrode maintenance. Insertion electrodes like all electrodes should be mounted at least 10o angle up from horizontal for best performance. 9027 -10B
pH electrode combination with 1/2” male thread sealed reference junction temperature range 0 - 100 oC pH range 0 - 13 pH.
9126 -10B
Platinum Redox (ORP.) electrode with large annular Platinum band, sealed reference with annular ground glass sleeve type junction.
1627 -10B
Flat glass pH electrode with Kynar (PVDF) housing for greater chemical resistance and higher temperature use pH range 0 - 12 pH.
1698 -10B
Flat Platinum sealed combination Redox (ORP.) electrode with Kynar (PVDF) housing and double junction temperature range 0 - 100oC.
P8027 - 10B
Sealed pH electrode in PVDF housing with annular ceramic reference junction mounting 3/4'' BSP. thread 0 - 100oC pH range 0 - 13 pH.
P8126 - 10B
Sealed Redox electrode in PVDF housing with annular ceramic reference junction mounting 3/4'' BSP. thread 0 - 100oC pH range 0 - 13 pH.
P8000 -10B
Sealed DJ pH electrode in PVDF housing with ceramic reference junction mounting 3/4'' BSP. thread pH range 0 - 13 pH.
R8000 -10B
Sealed DJ Redox electrode in PVDF housing with ceramic reference junction mounting 3/4'' BSP. thread temperature range 0 - 100 oC.
P800T/TC -10B
Sealed DJ pH electrode in PVDF housing with porous teflon reference junction mounting 3/4'' BSP. thread pH range 0 - 13 pH.
R800T -10B
DJ Redox electrode in PVDF housing with porous teflon reference junction mounting 3/4'' BSP. thread temperature range 0 - 100 oC.
3637 - 10B
Sealed DJ pH electrode in PVDF housing with PTFE reference junction mounting 3/4'' BSP. thread.
3698 - 10B
Sealed DJ Redox electrode in PVDF housing with PTFE reference junction mounting 3/4'' BSP. thread.
Automatic Temperature Compensation Many modern pH controllers also read solution temperature and have auto temperature compensation fitted as standard. We are able to supply pH electrodes with built in ATC and we are also able to supply seperate stainless steel auto temperature compensators. These can be be specially sized and have a special temperature sensor inside. ATP100-10ST
Stainless steel automatic temperature compensator temperature range 0 - 100 oC mounting by 1/4” BSP male thread, length 100 mm cable length 3m
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
6
Panel Mounting Conductivity Instruments Panel Mounting Controllers We are now stocking the C7335 conductivity controller featuring a 96 x 48 Din enclosure with a very short case length of only 95 mm ideal for mounting in small panels in confined spaces and is an ideal replacement instrument when compact dimensions are required. Featuring a switched mode power supply 86 - 264 VAC and user selectable ranges, make this an ideal instrument to hold in stock.
C7335 Controller Panel mounting Conductivity controller with user selectable ranges 20µS, 0 - 200 µS, 0 - 2000 µS, 20.0 mS & 200.0 mS (Limits 100mS) Selectable cell constants k= 1.0, 0.1 or 10.0 increases or decreases the measuring range by 10. Two control relays one alarm relay and an isolated 0 - 20 or 4 - 20mA current output, mains supply 86 - 264 VAC AK48
Instrument door to IP55 for the P7300 range.
C7635 Controller Panel mounting Conductivity controller with user selectable ranges 20µS, 0 - 200 µS, 0 - 2000 µS, 20.0 mS & 200.0 mS (Limits 100mS) Selectable cell constants k= 1.0, 0.1 or 10.0 increases or decreases the measuring range by 10. Two control relays one alarm relay and an isolated 0 - 20 or 4 - 20mA current output, mains supply 86 - 264 VAC AK96
Instrument door to IP55 for the P7600 range.
C7685 Series Controllers For those more demanding applications where greater accuracy is required for measuring higher conductivies the C7685 instrument offers the possibility to use the micro transmitter pre amplifer which increases the measuring range by a factor of 100 and allows mounting of the cell upto 120 metres from the controller. The C7685-001 is a special version with dual slope auto temperature compensation and selectable readout for either µS or MΩ.
C7685 Panel mounting µp conductivity / o C meter with 4 ranges 0-20.0, 0-200.0, 0-2000 µS & 0-20.00 mS selectable or auto ranging. Two set points, with time delay, alarm relay, auto temp comp & isolated current output.
7
MTEC
Electrodeless cell preamplifier increases the 4 ranges from 2.0 mS to 2000 mS
C7685-001
Panel mounting µp Ultra pure water conductivity / resistivity meter with special auto temp comp for ultra pure water.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Surface Mounting Conductivity Instruments Surface Mounting Controllers For 2014 we have our traditional range of 3600 conductivity controllers and transmitters available for Din rail mounting or weatherproof surface mounting enclosures.
3600 Series Din Rail Mounting Instruments C3645-W
Conductivity controller, ranges 0-200 µS, 0-2000 µS 0-20.00 mS, 1 set point 0 - 40 sec delay timer & 4 - 20 mA O/P in IP55 enclosure.
Two Wire Transmitters C3630-W
Two wire conductivity transmitter isolated 4 - 20 mA O/P. Mounted in an IP55 W’proof enclosure.
-W
W’proof enclosure for 3600 series instruments if not required <deduct>
C7335-W & C7635-W Controllers As the 7635 & 7335 instruments feature a very short case length of only 95 mm they are ideal for mounting in compact surface mounting enclosures. C7335-W
C7335 Conductivity controller in surface mounting enclosure
C7635-W
As C7335-W but with the larger C7635 controller
The MO5 & M20 series of instruments which are very easy and logical to program microprocessor based instruments. MO5-CD is a controller in an IP65 surface mounting enclosure. Featuring on/off controls with delay timers and adjustable hysteresis along with a switch mode power supply 100 to 240 VAC 50 / 60 Hz.
MO5-CD Conductivity Controller MO5-CD
Conductivity controller in surface mounting IP65 enclosure range 0 - 2000µS with two control relays an alarm relay with delay timers flow sensor input and two isolated 4 - 20mA output mains supply by switch mode power supply 100 to 240 VAC 50 / 60 Hz.
-DL
Built in data logger logs to SD card which is installed inside the instrument add
M20-CD Conductivity Controller M20-CD
Low cost conductivity controller in surface mounting IP65 enclosure range fixed range 0 - 100µS with two control relays and an isolated 4 -20mA output mains supply 230 VAC 50 / 60 Hz.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
8
Conductivity Cells Dip Conductivity Cells. Our dip conductivity cells are for installation into open tanks sumps and channels. The D1 cells are high linearity cells with k = 1.0 and 10.0 with either cPVC, kynar or SS riser tubes. Maximum conductivity of 100 mS k = 1.0 or 1000 mS k = 10.0 depending upon the instrument in use. The D2 range cells are standard cells with k = 1.0 or 0.1 with uPVC riser tubes are for solutions up to 50 oC with a maximum conductivity of 50 mS depending upon the instrument in use. D1-10
Dip cell k= 1.0 in epoxy 600 mm long cPVC riser tube max temp 80 o C
D1-100
Dip cell k=10.0 in epoxy 600 mm long cPVC riser tube max temp 80oC
D2-01
Dip cell k=0.1 in epoxy 600 mm long PVC riser tube max temp 50 o C
D2-10
Dip cell k=1.0 in epoxy 600 mm long PVC riser tube max temp 50oC
-PVDF -SS -F -T
PVDF riser tube on D1 cells per metre or part metre (add) SS riser tube on D1 cell per metre or part metre (add) P.V.C. ( PP for kynar ) Mounting flange for dip cells (add) Auto Temperature comp fitted to cell (state range and Instrument) - add
Insertion Conductivity Cells. Our insertion conductivity cells are for installation into pipework to measure the conductivity of flowing samples either in bypass pipe work or into large diameter pipes or vessels IN5-01 IN5-10
CP621-10 CP621-01
Insertion cell k= 0.1 In PVC with graphite electrodes and BSP 3/4’’ thread. Insertion cell k= 1.0 In PVC with graphite electrodes and BSP 3/4’’ thread. Insertion cell k=1.0 In cPVC epoxy and graphite with 3/4’’ thread Insertion cell k= 0.1 In cPVC epoxy and graphite with 3/4’’ thread
CP721-10
Insertion cell k=1.0 In Peek and graphite with 3/4’’ thread max temp 120oC
IN2-10
High linearity insertion cell k=1.0 In Peek and epoxy with graphite with electrodes 3/4’’ thread max temp 90 oC High linearity insertion cell k=10.0 In Peek and epoxy with graphite with electrodes 3/4’’ thread max temp 90 oC
IN2-100
PSE-01 PSE-001
Insertion cell k=0.1 In stainless steel with 3/4’’ thread Insertion cell k=0.01 In stainless steel with 3/4’’ thread
Flow Line Conductivity Cells.
9
FL3 01
Flowline cell K=0.1 in P.V.C. fitted 2m cable low for low temperature / pressure use.
FL3 10
Flowline cell K=1.0 in P.V.C. fitted 2m cable for low temperature / pressure use.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Conductivity Cells & Accessories High Temperature Conductivity Insertion Cell. PSE4 10-HT
High temp insertion cell K=1.0 in stainless steel with 3/4” thread
Blind Two Wire Transmitters Electrodeless conductivity transmitter manufactured in cPVC with built in electronic amplifier to provide an isolated 4-20mA signal corresponding to the measuring range, fitted with auto temp compensation to a base of 25 oC at 2% per oC. The same two wires that power the transmitter also carry the current signal allowing the transmitter to be mounted up to 1000 metres away from the receiving instrument BCT10 BCT100 BCT1000
Two wire electrodeless conductivity transmitter in cPVC range 0 - 10mS Two wire electrodeless conductivity transmitter in cPVC range 0 - 100mS Two wire electrodeless conductivity transmitter in cPVC range 0 - 1000mS
BC7635
Panel mounting controller 0 - 10.00 mS, 0 - 100.0 mS or 0 - 1000 mS with transducer power supply 2 set points & non isolated 0 - 20mA output
BC7635W
As above suppled in surface mounting enclosure
Accessories Insertion conductivity cells are easliy converted into flow line cells by installing the insertion cell into a “Tee” we recomend thet a “Tee” of at least size larger than the thread on the cell is used (execpt IN5 cell) so as not to restrict the flow through the cell.
-T- PVC -T- PP -T- SS
PVC Tee with adaptors to 3/4” BSP max temp 50oC pressure 3 bar Polypropylene Tee with adaptors to 3/4” BSP max temp 80oC Stainless Steel Tee with adaptors to 3/4” BSP (see cell for limits)
ACS1
Conductivity simulator 11 switched outputs from 1-100,000 µS.
LMK2 LMK4 LMK7
Connecting cable no ATC per metre Connecting cable with ATC per metre Connecting cable for electrodeless cells and MTEC per metre
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
10
Conductivity Control Kits Auto Rinse Water Control Kits The metal finishing industry uses vast quantites of both town supply and demin water to rinse components after chemical processing. Savings in water can be achieived by only adding water when the rinse tank is contaminated which can be controlled by conductivity.
C3645-RC
Auto rinse control kit Controller C3645-W Ranges 0-200µS, 0-2,000µS & 0-20mS with ATC and 4-20 mA current output. D210T10KF 600mm long dip cell fitted auto temp comp, mounting flange & 3 m connecting cable, max solution temp 50 o C Brass solenoid valve 1/2'' B.S.P. with w’proof coil. As above with BSV075-00 Brass solenoid valve 3/4'' B.S.P. with w’proof coil.
Solution Strength Control Kits
C3645-SSK
Conductivity controller with digital display, set point with delay timer and current output of 4-20 mA. Range 0-20mS fitted auto temp comp in surface mounting enclosure with D210F 600mm long dip conductivity cell in PVC fitted with flange & 3 m connecting cable max temp 50 o C Peristaltic pump with large bore tubing, selectable outputs by internally jumper of 30, 60, 90 or 120 L/Hr, mains supply 230VAC.
C3645-010-SSK As above but range 0 - 200 mS with D410T10KF 600mm long dip conductivity cell in PVDF fitted auto temp comp mounting flange & 3 m connecting cable, max solution temp 100 o C Peristaltic pump with large bore tubing, selectable outputs by internally jumper of 30, 60, 90 or 120 L/Hr, mains supply 230VAC. Kits can be made up with any of our cells or pumps to suit your application please call our office for prices.
11
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Electrodeless Conductivity Control Conductivity at 25 oC in milliseimens
Electrodeless Control
Conductivity
The strength of weak acid and alkali solutions maybe accurately controlled by using conductivity. As the solution strength increases the electrical resistance decreases (conductivity is the reciprocal of resistance). Care must be taken as most solutions reach a peak where the conductivity decreases again. This is shown on our enclosed graph. Our electrodeless conductivity systems feature sensors which are uneffected by fouling. Typical applications are the control of processing solutions in the metal finishing industry and the control of CIP solutions in
C3655W
Electrodeless or (Torroidal) conductivity controller in surface mounting enclosure with digital display set point with delay timer & 4 - 20 mA. output Ranges 0 - 20, 0 - 200 or 0 - 2000mS. (factory set.) DEC1 600 mm dip cell in PVDF. with PP riser tube fitted ATC, flange & 2 m cable max temp 85 o C.
-MS
Mark space timer & larger enclosure allows time for mixing.
-PVDF -SS
PVDF cell riser tube max temp 100 oC Stainless steel cell riser tube max temp 100 oC
Concentration Indicator & Controller C7685W-K
Conductivity controller with 2 set points, alarm relay delay timers & isolated output . Manual or auto ranging from 0-20, 0-200 or 0-2000 mS, Programmable concentration range in either %, mg/L or Baume´ fitted ATC DEC1 600 mm long dip cell in PVDF. with PP riser tube flange & micro transmitter preamplifier
-PVDF -SS LMK7
PVDF cell riser tube max temp 100 o C Stainless steel cell riser tube max temp 100 o C Connecting cable METC to C7685 per metre
Electrodeless Conductivity Cells. SI315 SI315.I SZ724 RTPVC RTPP-F RTPVDF-F RTSS-F
Electrodeless cell in PVDF (Kynar) with Auto Temp Comp Via Pt100 Electrodeless cell as above with DN32 Taper fitting to DIN 1185.52 Stainless steel collar and clamp ring assembly for Brewery / Dairy use Riser tube in PVC 100 mm long connects Micro transmitter to Cell Riser tube in polypropylene up to 1000 mm long with PVC mounting flange Riser tube in PVDF up to 1000 mm long with PP adapter Riser tube in Stainless steel up to 1000 mm long with PP adapter Other mountings can be supplied to order
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
12
Dissolved Oxygen. Panel Mounting Controllers OD7335
DO2 controller 48 x 96 with two control relays, alarm relay, logic input & isolated 0/4 - 20mA output, mains supply 86 - 264 VAC
OD7635
DO2 controller 96 x 96 with two control relays, alarm relay, logic input & isolated 0/4 - 20mA output, mains supply 86 - 264 VAC
-W
W’proof enclosure to hold 7335 or 7635 instrument (add)
OD7685
Panel mounting DO2 meter which will display Oxygen in ppm, % saturation or mg/L. with ATC and temperature display. Two control relays, alarm relay and isolated current output Optional auto clean with freeze and hold
-W
W’proof enclosure to hold 1 or 2 7685 instruments (add)
DO2 Sensors DES 1
Dip DO2 sensor 1800 mm with j-box & mounting flange spare membranes & filling solution.
-PF
Polypropylene float 600 mm dia with mounting for DES1 for use in lagoons and sumps where the level changes.
-AC
Auto clean air blast cleaning of the sensor includes compressor, solenoid valve, regulating valve, air blast nozzel and auto clean function in the OD7685.
DES-1SK
Spares kit to refurbish DES1 sensor
SOE 10
Suspended Oxygen Electrode Galvanic cell with anode and silver cathode with electrolyte filling and teflon membrane. Fitted with temp sensor for ATC and temperature readout.
LMK6
Dissolved oxygen connecting cable per metre length
DO2 Simulator OD105
DO2 simulator for calibrating the instrument and checking the operation of Polarographic (Clark) type DO2 cells. Note using a simulator does not eliminate the need to calibrate the sensor.
13
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Turbidity & Suspended Solids Panel Mounting Turbidity Controller TU7685
Turbidity meter based on the Nephelometric method of measurement auto or manual range selection form 0 - 4.00, 0 - 40.00, 0 - 400.0 or 0 - 4000. NTU with two control relays one alarm relay and an isolated current output. The TU7685 is for use with the TU800 Infrared light sensor which carries out the measurement. The sensor maybe mounted up to 100 metres away from the TU7685 Turbidity meter.
-W
W’proof enclosure to hold 1 or 2 7600 instruments (add) Three types of sensor are available
TU800 -F
Off line flow cell in PVC for a small flowing sample of 0.25 to 25 litres/min. connection by 8 mm OD tubing max temp 30oC supplied with 10 m connecting cable and connector
TU800 -I
Inline mounting with a 2” PVC tee to form part of a 2” line supplied with 10 m connecting cable and connector
TU800 -D
Dip sensor 600mm long with PVC riser tube and mounting flange max temp 30 oC supplied with 10 m connecting cable and connector
TU910
Additional cost for 30 metre long connecting cable add
SMB
Swivel mounting bracket for dip sensor
-AC
Dip sensors can be supplied with an auto clean system comprising of air compressor, solenoid & regulating valves with air blast nozzel auto clean function in the instrument.
Suspended Solids Transmitter & Controller ST8315
Two wire Turbidity transmitter, submersible with optional auto clean by air blast. designed to measure high turbidity & suspended solids based on back scattering technology ranges 0 - 100, 0 - 1000 or 0 - 10,000 FTUs output 4 - 20 mA power supply 24 VAC
BC7635
Panel mounting controller 0 - 10.00 mS, 0 - 100.0 mS or 0 - 1000 mS with transducer power supply 2 set points & non isolated 0 - 20mA output
BC7635W
As above suppled in surface mounting enclosure
Portable Turbidity Meter Kit TN100IR
Microprocessr based portable Turbidity meter uses an infrared LED light source to provide laboratory standard repeatability and accuracy. Measurement range 0 - 1000 NTU units in 3 ranges automatically selected from 0 -19.99, 0 - 99.9 and 0 - 1000 NTU. Supplied with sturdy compact carrying case calibration standards and sample vials.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
14
Residual Chlorine Controllers Residual Chlorine Potentiostatic The CL7335/CL7635 Residual Chlorine controllers are designed for direct reading of free chlorine in ppm or mg/L. when used with the SZ283 Potentiostatic sensor that responds to Residual Chlorine, Bromine, Chlorine Dioxide or Ozone. The SZ283 chlorine sensor maybe used with either the:SZ7251 Small auto cleaning flow cell. SZ7263 Constant velocity flow cell designed to hold up to three 12 mm Ø electrodes or PS2 Flow cell to hold two 12 mm Ø electrodes and being able to accept some pressure. For good results the flow must be constant between 10 to 30 litres /hour
CL7335
Residual Chlorine controller panel mounting 96 x 48 Din spec case selectable scales for either 0 - 2.00 & 0 - 20.0 ppm. or 0 - 2.00 & 0 - 20.0 mg/l. with manual or auto temperature compensation via either Pt100 or Pt 1000. With two control relays, one alarm relay and an isolated 0 - 20 / 4 - 20mA current output, mains supply 86 - 264 VAC
CL7635
Residual Chlorine controller panel mounting 96 x 96 Din spec case selectable scales for either 0 - 2.00 & 0 - 20.0 ppm. or 0 - 2.00 & 0 - 20.0 mg/l. with manual or auto temperature compensation via either Pt100 or Pt 1000. With two control relays, one alarm relay and an isolated 0 - 20 / 4 - 20mA current output, mains supply 86 - 264 VAC
-W -W
Surface mounting enclosure for CL7335 or CL7635 add W’proof enclosure to hold 1 or 2 instruments (add)
Potentiostatic Sensor SZ283
Potentiostatic chlorine sensor for use with either flow cell
Flow Cells
15
SZ7251
Auto clean Potentiostatic flow cell flow 15 - 40 L/Hr constant
SZ7263
Constant velocity flow cell of the overflowing type to hold up to 3 electrodes 12 mm Ø sample flow rate of 10 to 30 L/Hr
PS2
Flow cell to hold 2 electrodes 12mm diameter by 110 mm long either pH, Redox, Potentiostatic chlorine sensor black epoxy conductivity cell or temperature sensors
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Residual Chlorine Controllers Residual Chlorine Open Amperometric The open amperometric residual chlorine cells are the traditional design using copper and platinum electrodes in a flow cell with glass ball which rotate in the cell to keep the electrodes clean. The cells will accept some pressure and have a built in mini VA flow indicator to set the flow with an optional flow switch for connection to the controller. pH range of the sample is constant between 3.00 pH and 7.00 pH flow rate about 40 l/Hr and max pressure 8 bar range 0-10 mg/L.
MO5-CL Residual Chlorine Controller The MO5-CL-OA is a very easy and logical to program microprocessor based Residual Chlorine controller. Featuring on/off and proportional controls along with a switch mode power supply 100 to 240 VAC 50 / 60 Hz. MO5-CL-OA
CL2 controller in surface mounting IP65 enclosure range 0 - 2.00 or 0-20 mg/L with two control relays an alarm relay with delay timers, flow sensor input and two isolated 4 -20mA outputs mains supply by switch mode power supply 100 to 240 VAC 50 / 60 Hz.
-DL
Builtin data logger logs to SD card which is installed inside the instrument add
Open Amperomertric Residual Chlorine Cell SCLO11
Open Amperomertric free chlorine cell with copper and platinum electrodes mini VA flow indicator and needle valve measuring range 0-10.00 ppm
SCLO
Open Amperomertric free chlorine cell with copper and platinum electrodes mini VA flow indicator and needle valve measuring range 0-10.00 ppm Three additional ports to hold 3 electrodes 12mm diameter by 110 mm long either pH, Redox, Potentiostatic chlorine sensor black epoxy conductivity cell or temperature sensor
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
16
Residual Chlorine Controllers Residual Chlorine Closed Amperometric The closed amperometric residual chlorine sensors are a modern design where the electrodes are located inside the sensor in an electrolyte. The sensor is fitted with a semi permeable membrane which allow the ions to be measured to permeate through the membrane into the sensor. The sensor fits into a flow cell which has a built in mini VA flow indicator to set the flow with an optional flow switch for connection to the controller. Flow rate about 40 l/Hr with a max pressure of 1 bar.
MO5-CL Residual Chlorine Controller MO5-CL-CA
CL2 controller in surface mounting IP65 enclosure range selectable to suit the sensor, with two control relays an alarm relay with delay timers, flow sensor input and two isolated 4 -20mA outputs mains supply by switch mode power supply 100 to 240 VAC 50 / 60 Hz.
-DL
Builtin data logger logs to SD card which is installed inside the instrument add
Flow Cell Closed ampermetric sensors have to be mounted into a flow cell where the the flow rate can be set with the option of a flow sensor to stop control on no sample flow. DF01/C
Holder for a sensor with a diameter of 25 mm. (11/4”BSP)
Closed Amperometric Sensors Closed amperometric sensors have built in amplifers to provide an amplifed electrical output signal for direct connection to the controller by 4 wires, 2 for the power and 2 for the output signal.
Residual Chlorine CL4.1H
Free chlorine inorganic sensor for surfactant free water pH range 6. to 8 pH constant Measuring range 0 - 2.00 mg/l
CL4.1N
Free chlorine inorganic sensor for surfactant free water pH range 6. to 8 pH constant Measuring range 0 - 20.0 mg/l
M20 ECL1
Membrane cap for cells type CL4 Filling solution 100 mls for cell type CL4
CS2.3N
Free chlorine inorganic sensor for surfactant free water pH range 4. to 9 pH constant Measuring range 0 - 20.0 mg/l
M48.1G ECS2.1/G
Membrane cap for cells type CL2.3N with GHolder Filling solution 100 mls for cell type CS2.3N
Chlorine Dioxide CD4.1N M20 ECD4/W
17
Chlorine dioxide sensor for surfactant free water pH range 1 to 11 pH constant Measuring range 0 - 20.0 mg/l Membrane cap for cells type CD4 Filling solution 100 mls for cell type CD4
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Flow Proportional Dosing Chemical Dosing A very reliable cost effective way of dosing water treatment chemical such as sodium hypochlorite is proportional to flow. Our system comprises of a contacting head water meter used to control the output of one of or Red Dosing Pumps (RDP) with external pacing input. Remember when calculating the output of the dosing pump that sodium hypochlorite has only 12% or 14% active chlorine depending upon the supplier and to store the sodium hypochlorite in black dosing tanks to provide protection from ultra violet sun light. We are able to supply ready assembled dosing skids in polypropylene offering a bunded area for the chemical container and double confinement. These will be built as specials so please contact us with your requirements.
Dosing Systems AFP-BPS
PVC Back plate fitted with inlet isolating valve, inline filter contacting head water meter, dosing point with injection fitting terminating in a PVC union for connection to service Supplied with flexible suction hose with foot valve and Strainer fitted with a low level float switch and model AT2-AM 12 - 03 Red Dosing pump
AFP-BP-050
With 1/2” water meter and pipe work for flow rates up to 1.5m 3
AFP-BP-0757
With 3/4” water meter and pipe work for flow rates up to 2.5m 3
AFP-BP-100
With 1” water meter and pipe work for flow rates up to 3.5m 3
AFP-BP-125
With 11/4” water meter and pipe work for flow rates up to 5.0m 3
Extras 7175 AC-VM/PVDF PP-Housing
PVC Degassing head fitted to the Red Dosing Pump MF valve anti-syphon, b’pressure & safety valve adjustable Polypropylene housing with clear PVC front to hold the dosing pump and manifold
Portable Chlorine Photometer To check the precise dose rate achieved with flow proportion dosing system a portable chlorine meter is invaluable we offer a portable colorimeter which is simple and reliable to use C201
Portable colorimeter microprocessor based meter for the measurement of free chlorine. Supplied with carrying case three sample vials and test reagents with full instructions.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
18
Temperature Sensors Temperature Sensors TPA range of temperature probe assemblies are three wire PRT. Platinum resistance thermometers to BS.1904. The sensors are manufactured from 316 Stainless steel all welded construction to food grade standards.
TPA 1-N
Insertion sensor with ABS head 75 mm lagging extension up to 150 mm insertion
TPA 1-A
Insertion sensor with Aluminium head 75 mm lagging extension up to 150 mm insertion
TPA - 2
Sensor 6 mm dia in 316 stainless steel to be used with a compression fitting or submerged into open vessels.
TPA-2/PTFE
As TPA-2 but fitted with a PVDF boss and PTFE. sheath for use in process chemical vessel such as acid etch baths Duplex three wire RTD sensors (add)
-D
19
TPA - 3
As TPA-2 but fitted with a connector for easy fitting & removal. Use with a pocket or compression fitting, length up to 150 mm
TPP
Pockets in stainless steel with compression fittings and 1/2” BSP external thread for mounting into your process
-XXX -TXXX
Additional length per 100 mm Additional length PTFE Sheathed/100 mm
-PXXX CF-025 CF-050
Additional length pocket/100 mm SS compression fitting 1/4” BSP SS compression fitting 1/2” BSP
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Temperature Transmitter & Controllers Transmitters & Controllers Temperature is the most widely measured and controlled industrial parameter with an application in almost every industrial facility in the world. We are mainly concerned with the measurement and control of liquid temperatures from water to process solutions which include acid and alkali solutions. We are able to supply a simple easy to install and use range of controllers. For applications requiring connection to a PLC or remote instrument we have a head mounting 2 wire transmitter. While the majoritory of our applications use PRT sensors we are able to supply thermocouples please contact our sales office with your requirements.
TT100
Two wire temperature transmitter Pt100. input 4-20mA output. Ranges 0-50 o C, 0-100 o C or 0-200 o C (to be specified).
TR3645
Temperature controller in W’proof enclosure. Range -20 to +120 o C single control relay & non isolated 4 - 20 mA output.
TR7615
Temperature controller for panel mounting, 0 -200 o C 2 control relays and 0 - 20 mA output. supply either 230 or 115 VAC
K39T
Panel mounting temperature controller with dual 4 digit display thermocouple or 3 wire RTD I/P, 2 relay outputs mains supply 100 to 240 VAC
TLZ11
Panel mounting temperature controller with 4 digit LED range 0 to 100oC input via Pt1000, one control relay size 33 x 75 x 64 mm HxWxD mains supply 100 to 240 VAC
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
20
Liquid Level Control Liquid Level Controllers & Electrodes ALC1101
Plug in level controller for use with electrodes
ALC1101-B
Plug in level controller for use with electrodes with DIN rail mounting base
ALC1101W1
Level controller supplied in weatherproof enclosure
LE1/3
Multi electrode holder for 3 x 1/4" ø S’Steel electrodes Multi electrode holder 5 x 1/4" ø stainless steel electrodes
LE1/5
LE6/3 LE6/5 CT-RB
Electrode holder 3 x 1.2m long PVC. legs and carbon tips Electrode holder 5 x 1.2m long PVC. legs and carbon tips Spare carbon tip in rubber bung
LE20
Electrode holder with 3 x 3 mm dia electrodes to be cut to length 900 mm long with connector
LE7 LE7-WMB3
Single holder for 1/4" ø rod Wall mounting bracket for three LE7 electrodes Wall mounting bracket for five LE7 electrodes 1/4" Stainless rod per metre or part metre length 1/4" Stainless rod plastic coated per metre or part metre length 1/4" Titanium rod per metre or part metre length
LE7-WMB5 SS025 SS025PC TR 025
Float Switches FS10
21
CW1
Float switch mercury free with Polyethylene body and 10 metres of PVC cable Optional counter weight
FS10 CW1
Supplied in packs of 10 price each Supplied in packs of 10 price each
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Liquid Level Measureßment Ultrasonic Level Transmitters Ultrasonic level transmitters are for use on foam and vapour free liquid with a flat level surface to measure from. care must be taken to avoid installation where mixers or internal steel work may interfere with the measurment. MF-C MF-CER MF-C-I/S
Level transmitter 2” BSP mounting 0.4 - 8m, output 4-20 mA Level transmitter 2” BSP mounting 0.4 - 11m, output 4-20 mA ATEX approved Level transmitter for IS Zone “0” range 0.4 to 11 metres
Hydrostatic Level Measurement. By measuring the hydrostatic head with either an insertion or suspended pressure transducer the liquid level maybe measured. Remember to take into account the SG of the liquid being measured when calibrating the selected indicator or controller in level units. AlMP01
lnsertion pressure transmitter in stainless steel and ceramic mounting by 1/4” BSP male thread output 4 - 20 mA power supply 10 - 32 VDC Ranges 0 - 0.1, 0 - 0.25, 0 - 0.5, 0 - 75, or 0 -1.0 Ranges 0 -1.0, 0 - 2.0, 0 - 5.0, or 0 - 10 Bar
ADMP331P
lnsertion pressure transmitter with flush stainless steel diaphgram mounting by 1” BSP male thread output 4 - 20 mA power supply 12 - 36 VDC Ranges 0 - 0.1, 0 - 0.16, 0 - 0.25, 0 - 0.4, 0 - 0.6 Bar Ranges 0 - 1.0, or 0 - 2.5 Bar
ALMK809
Suspended pressure transmitter in PVC with ceramic sensor output 4 - 20 mA power supply 12 - 36 VDC Ranges 0 -1.6, 0 - 2.5, 0 - 4.0 or 0 - 6.0 meters Price excludes special vented cable Ranges 0 -10, 0 - 25 upto 0 - 100 meters excludes special vented cable
AlML
Suspended pressure transmitter in stainess steel with ceramic sensor output 4 - 20 mA power supply 10 - 32 VDC Ranges 0 -0.5, 0 -1.0, 0 - 2.5 or 0 - 5.0 Price excludes special vented cable Ranges 7.5, 0 -10 m , 0 -20 m upto 0 - 200 m Price excludes special vented cable
CC-XX
Vented PVC connecting cable add per metre
Controllers for use with Level Transmitters BC7635
Panel mounting controller 0 - 100% with transducer power supply 2 set points & non isolated 0 - 20mA output
LC -ATA 2
Dual trip amp with transducer power supply and latching control between the high & low set points in wproof enclosure
LC -ATA 2/2
Two dual trip amp with transducer power supply and latching control between the high & low set points in wproof enclosure
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
22
Open Channel Flow Open channel flow is the measurement of waste water discharges usually from industrial premises to sewer or water course. The usual requirement is to measure the flow in litres per second and totalise the flow in metres cubed. Where flow proportional samples are required the flow meter can provide a flow proportional output to operate our simple peristaltic water sampler
Open Channel Flow Measurement. MFLR
Ultrasonic flow meter surface mounting displays both total and instantaneous flow at the same time. Fitted 3 relays and isolated 4 - 20 mA output, power supply 115/230 VAC supplied with RYT15 transducer
RYT15
Ultrasonic transducer for use on foam free liquid With optional transducer mounting bracket Note the MFLR may also be used for level measurement over a range of 1 - 10 metres with 3 programable relays for control and/or alarm purpose
PP-MKB
Transducer mounting bracket shown with transducer
HR200
Mcerts Certified Hydroranger 200 Ultrasonic open channel flow meter for use in vee notch & weir tanks & flumes on foam free liquids. Displays total & instantaneous flow with a current output for data logging power supply 100 - 230 VAC.
Vee Notch Tanks VNT
Polypropylene Vee notch tanks can be made to order with SS vee notch plates.
VNP30-SS VNP60-SS VNP90-SS
Vee Notch Plate 30 o angle in stainless steel Vee Notch Plate 60 o angle in stainless steel Vee Notch Plate 90 o angle in stainless steel
Water Samplers PWS 1
23
Peristaltic water sampler to take flow proportional samples from flow meter.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Signal Conditioning Data logging & Recording Signal Converters & Controllers ASI 1
Signal isolator converter to galvanically separate the input from the output, hence eliminating ground loop problems, input/output 0(4)-20mA
ATA 1
Single point trip amplifier input 0(4)-20mA option for signals from Pt100 sensors. The output is one set of volt free relay change over contacts.
ATA 2
As ATA1 but the output is two sets of volt free relay change over contacts. Also available is latching control between the high and low set points.
AII 1
Signal integrator which accepts a 0(4)-20mA input signal the output is a volt free contact to drive a dosing pump or counter from a flow signal
AFC1
Frequency to current converter input minimum of 300 pulses/ min., output 4 - 20 mA. For converting a turbine flow meter output into analogue signal
ASR1
Square root extractor input 0(4)-20mA output 0(4)-20mA for linearising signals from differential flow transducers used in flow measurements.
ASM1
Signal multiplier or divider to multiply or divide two analogue signals. Uses include multiplying pH and flow signals to control dosing pumps.
APS 24
Power supply stabilized 24VDC requires 115 or 230 VAC mains supply
SEM1300
Miniature 24 volt DC power supply, input 90 - 253 VAC output 24 VDC.
SEM1000
Loop powered signal isolator I/P 4 - 20 mA O/P 4 - 20 mA self powered
BC7635
Panel mounting indicator with two set points and 20 mA loop P/Supply
Paperless Chart Recorders / Data Loggers SM500-1-B SM500-2-C SM500-3-C SM500-4-C
Digital recorder 1 Digital recorder 2 Digital recorder 3 Digital recorder 4
input and colour TFT screen inputs and colour TFT screen inputs and colour TFT screen inputs and colour TFT screen
-3 £ 186.00 -E -TP
Addition of maths logic and totalizer for flow totalisation on screen Addition of ethernet 10BaseT (assumes customer IT dept sets up) Addition of transmitter power supply
SM1000 SM1000-T
Digital recorder 2-6 inputs with TFT screen and smart card for data logging With option for flow totalisation from current input
B12468 B12028 SW/D-MGR
1 GB SD memory card USB multicard reader Data manager software to down load and plot graphs etc
RWMB. SM-COMM
Weatherproof wall mounting enclosure with clear front Setting up of the digital recorder at AWE Ltd works
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
24
Water Meters The CT Series of contacting head water meters are brass bodied watermeters intended for the measurement of clean water such as towns supply water flowing into a water softener, evaporative cooling tower or any other piece of process plant requiring the volume of water flowing in it to be accurately measured and totalised. The method of measurement is by high sensitivity turbine impulse sender which drives the large accurate gear train to provide both a totalisation and digital output. The totalisation is displayed on a mechanical non resettable counter and the digital output is by volt free contacts proportional to the flow rate. The reed switch provides an impulse rate factory selectable from 1 impulses per litre K = 1 to 1 impulse per 100 litres K = 100 depending upon the size selected.
Cold Water Meters Use up to 30oC and pressures up to 10 bar. K = 1.0 or 10 Model No CTFI 15 CTFI 20 CTFI 25 CTFI 30 CTFI 40 CTFI 50
Size 1/2'' 3/4” 1'' 1 1/4'' 1 1/2'' 2''
Flow Flow Flow Flow Flow Flow
rate rate rate rate rate rate
up up up up up up
to to to to to to
Flow Rate 1.5 m3 / Hr 2.5 m3 / Hr 3.5 m3 / Hr 5 m3 / Hr 10 m3 / Hr 15 m3 / Hr
Constant K = 1.0 K = 1.0 K = 1.0 K = 1.0 K = 10.0 K = 10.0
Hot Water Meters Hot water meters for use up to 90 oC and 10 bar K = 1.0 or 10 CTCI CTCI CTCI CTCI CTCI CTCI
15 20 25 30 40 50
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2''
Flow Flow Flow Flow Flow Flow
rate rate rate rate rate rate
up up up up up up
to to to to to to
1.5 m3 / Hr 2.5 m3 / Hr 3.5 m3 / Hr 5 m3 / Hr 10 m3 / Hr 15 m3 / Hr
K K K K K K
= = = = = =
1.0 1.0 1.0 1.0 10.0 10.0
The CWFA Series of contacting head watermeters are coated cast iron bodied watermeters intended for the measurement of clean water. Typical applications are water supplies to industrial premises, evaporative cooling tower make up, electro plating line water supply or any other piece of process plant requiring the volume water flowing in it to be accurately measured and totalised. The totalisation is displayed on a mechanical nonresetable counter and the digital output is by volt free contacts proportional to the flow rate.
Flanged Water Meters Woltmann type water meters with dry dial for use up to 30 oC & pressures up to 10 bar. K = 10, 100 or 1000 CWFA CWFA CWFA CWFA CWFA CWFA
25
50 70 80 100 150 200
2'' 2 1/2'' 3'' 4'' 6'' 8''
Flow Flow Flow Flow Flow Flow
rate rate rate rate rate rate
up up up up up up
to to to to to to
15 m3 / Hr 25 m3 / Hr 40 m3 / Hr 60 m3 / Hr 150 m3 / Hr 250 m3 / Hr
K K K K K K
=10.0 =10.0 =10.0 =100.0 =100.0 =1,000
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
In Pipe Flow Magnetic Flow Meters For water and waste water upto 70 oC and pressures up to 16 bar or solutions with a conductivity greater than 10 µS. Wetted parts NBR and Hastelloy “C”. MFW51/50-25 MFW51/50-40 MFW51/50-50 MFW51/50-65 MFW51/50-80 MFW51/50-100 MFW51/50-150
Mag Mag Mag Mag Mag Mag Mag
flow meter flow meter flow meter flow meter flow meter flow meter flow meter
1'' with PN16 flanges. 1 1/2'' with PN16 flanges. 2'' with PN16 flanges. 2 1/2'' with PN16 flanges. 3'' with PN16 flanges 4'' with PN16 flanges. 6'' with PN16 flanges.
Magnetic Flow Meters High Temp For use up to 120oC and pressures up to 16 bar for solutions with a conductivity greater than 10 µS. or concentrated acids and alkali. Wetted parts PTFE and Hastelloy “C”.
MF31/50-25 MF31/50-40 MF31/50-50 MF31/50-65 MF31/50-80 MF31/50-100 MF31/50-150
Mag Mag Mag Mag Mag Mag Mag
flow meter flow meter flow meter flow meter flow meter flow meter flow meter
1'' with PN16 flanges. 1 1/2'' with PN16 flanges. 2'' with PN16 flanges. 2 1/2'' with PN16 flanges. 3'' with PN16 flanges 4'' with PN16 flanges. 6'' with PN16 flanges.
WMBKT-K
Surface mounting unit for the electronics so the display can be remotely mounted supplied with 2 x 10 m cable supply & return
Thermodynamic Flow Sensors Stainless flow sensor 24 VDC powered supply an output of 4-20 mA corresponding to the flow rate for use in pipes from 1” to 8” dia SN 450-GA SN 450/1-GA SN 450-GA - 3M SN 450/1-GA-3M SLG 3 -2 FPD-I
Stainless steel flow sensor 1/2'' BSP 5 - 150 cm/s L = 31 mm. Stainless steel flow sensor 1/2'' BSP 5 - 150 cm/s L = 48 mm. Stainless steel flow sensor 1/2'' BSP 1/2'' 5 - 300 cm/s L = 31 mm. Stainless steel flow sensor 1/2'' BSP 1/2'' 5 - 300 cm/s L = 48 mm. Signal Cable 2 metre long in PVC with connector Flow proportional dosing system for use in pipes from 1" to 8" diameter, provides an electrical signal proportional to the speed of the liquid from 0.05 to 3.0 meters per second. Mounting by 1/2" BSP male thread. Supplied with the electronics housed in a surface mounting enclosure. Output to suit dosing pump with external pacing control input
Batch Controller ABC 1
Auto batch controller housed in a surface mounting enclosure wired for either 230 VAC or 110 VAC with start / reset button, stop button and batch counter wired to count down and stop the pump or close a valve when a preset volume has flowed through a water meter or mag flow meter. Ideal for metering a set volume of water or chemical into a process.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
26
Flow & Batching Meters Flow Controllers Paddle wheel flow sensors are ideal for measuring and totalising the flow of clean water like solutions flowing in PVC or stainless steel pipes. offering a cost effective solution to measuring the flow in larger diameter pipes.
NX2000-Q
Panel mounting 96 x 48 din flow controller with input from paddle wheel flow sensor. With control relay and 4 - 20 mA current output
NX2000-S
Surface mounting 144 x 144 din flow controller with input from paddle wheel flow sensor. With control relay and 4 - 20 mA current output
Flow sensors EF10500 EF10501
PVC Flow sensor for pipes DN 15 to 100 mm Ø.EPDM seals PVC Flow sensor for pipes DN 15 to 100 mm Ø. Viton seals
EF10502 EF10503
PVC Flow sensor for pipes DN 150 to 200 mm Ø.EPDM seals PVC Flow sensor for pipes DN 150 to 200 mm Ø. Viton seals
EF10515 EF10516
SS Flow sensor for pipes DN 15 to 100 mm Ø.EPDM seals SS Flow sensor for pipes DN 15 to 100 mm Ø. Viton seals
EF10517 EF10518
SS Flow sensor for pipes DN 150 to 200 mm Ø.EPDM seals SS Flow sensor for pipes DN 150 to 200 mm Ø. Viton seals
Accessories
27
EF10504 EF10505 EF10506 EF10507 EF10508 EF10509
PVC PVC PVC PVC PVC PVC
saddle for saddle for saddle for saddle for saddle for saddle for
a a a a a a
pipe DN50 with mounting for the flow sensor pipe DN65 with mounting for the flow sensor pipe DN80 with mounting for the flow sensor pipe DN100 with mounting for the flow sensor pipe DN150 with mounting for the flow sensor pipe DN200 with mounting for the flow sensor
EF10510 EF10511 EF10512 EF10513 EF10514
PVC PVC PVC PVC PVC
Tee with 2 Tee with 2 Tee with 2 Tee with 2 Tee with 2
unions DN15 G 1/2” for mounting the flow sensor unions DN20 G 3/4” for mounting the flow sensor unions DN25 G 1” for mounting the flow sensor unions DN32 1 1/4” for mounting the flow sensor unions DN40 1 1/2” for mounting the flow sensor
EF148505 EF148506
Weld on SS adaptor with mounting for the flow sensor upto DN 225 Weld on SS adaptor with mounting for the flow sensor above DN 225
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Dosing Controllers Dose & Delay Timers ADT-1
Timer with adjustable delay and dose times in surface mounting weatherproof enclosure with flip up lid
ADT-2
Dual timer with two adjustable delay and dose timers in surface mounting weatherproof enclosure with flip up lid.
Seven Day Timers BT3605
Single channel seven day electronic timer for timed outputs to the nearest minute, in weatherproof corrosion resistant enclosure.
BT3607
Dual channel seven day electronic timer.
Shot Dose Timer
AST1
Shot dose timer in a weatherproof enclosure fitted with Off / Auto switch for the chemical pump. On auto the pump is operated by the start push button and runs for the duration of the timer the pump maybe stopped by switching to off
AST2
Dose delay timer and shot timer in weatherproof enclosure with Hand - off - auto switch for the chemical pump. On auto the pump is controlled by the dose - delay timer & on hand by the shot dose timer.
Microprocessor Timers ALTC
Controller timer with 4 channel 7 day timer, 4 cycling timers & 4 shot dose timers operated by the push buttons, providing the operation of 4 AST2 controllers in one enclosure Can be fitted with input for line running so no dosing occurs if the line stops.
Amperehours Meters & Dosing AH515.2
Digital amperehours meter which totalises the current flowing through the electroplating bath by measuring the voltage across a suitable shunt usually 0 - 60 mV for the full load current.
AH555.2
Features a presettable count down counter of 0 - 9999 which provides an output to start a dose timer of 0 - 99 seconds duration to operate a suitable chemical dosing pump to add reagent to the plating bath to replace the chemical which has been consumed.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
28
Cooling Water Control Our range of cooling water controllers provides cost effective dosing and control of your evaporative cooling tower. They are simple to install and operate providing precise and accurate control of your process.
Biocide Dosing BT3605
Single biocide dosing with single channel 7 day real time clock
BT3607
Dual biocide dosing with two channel 7 day real time clock
TDS Control C3645W-TDS-K
TDS Control range 0 - 2000 µS or 0 - 20.00 mS with control relay Supplied with FL310T10K cell and BSV 050 00 solenoid valve.
Redox / ORP Control R3647W-K
Redox / ORP Controller range 0 - 1000 mV with 2 control relays & 4 - 20 mA output, mains supply 230 VAC with Redox electrode system.
Compact Controllers Our range of cooling water controllers provides cost effective dosing and control of your evaporative cooling tower. They are simple to install and operate providing precise and accurate control of your process.
Flow Proportional Feed, TDS Bleed & Dual Biocide Control MO5-CT-CD
µP Based Cooling Water Controller with dual biocide dosing by 28 day clock flow proportional inhibitor dosing TDS controlled bleed with adjustable set point,& bleed limit timer including FL310T Conductivity cell.
Flow Proportional Feed, TDS Bleed, Biocide & ORP Control MO5-CT-CD/RH
29
µP Based Cooling Water Controller with redox controlled oxidising biocide dosing, non oxidising biocide dosing by 28 day clock, flow proportional inhibitor dosing, TDS controlled bleed with bleed limit timer including Redox electrode and conductivity cell
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Cooling Water Control Flow Proportional Feed, TDS Bleed & Dual Biocide Control Accepta’s ACW100 through ACW500 range of touch screen controllers which feature 3.5” touch screen controller with a graphic display of the process being controlled with very easy to navigate controls. Data logging ability to a smart card.
ACW300
µP Based Cooling Water Controller with dual biocide dosing, by 28 day clock, flow proportional inhibitor dosing proportional to make up flow rate, TDS controlled bleed with bleed with limit timer electrodeless conductivity cell As above with the 5.7” full colour screen
Flow Proportional Feed, TDS Bleed, Biocide & ORP Control ACW400
µP Based Cooling Water Controller with redox controlled oxidising biocide dosing, non oxidising biocide dosing by 28 day clock, flow proportional TDS controlled bleed with limit timer including Redox electrode and electrodeless conductivity cell As above with the 5.7” full colour screen
Additional Items
CTFI 20 CTFI 25
HY-BL 06 - 06V AT3-BX 10-10V
Water meter 3/4'’ BSP Flow rate up to 2.5 m 3 / Hr K = 1.0 Water meter 1'’ BSP Flow rate up to 3.5 m 3 / Hr K =1.0 Dosing pump 0 - 6 l/Hr against 6.0 bar 100 - 240 VAC Dosing pump 0 - 10 l/Hr against 10 bar 100 - 240 VAC
BSV 050 00 BSV 075 00
Brass solenoid valve 1/2” BSP with 240 VAC coil Brass solenoid valve 3/4” BSP with 240 VAC coil
FS-MANFD
PVC Manifold with flow switch and drain valve for use with CW controllers
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
30
Cooling Water Back Plate Systems Back plate Systems Back plate systems are ready wired and assembled cooling water control systems. Comprising of the controller, a PVC manifold with valves and sensors etc. Bleed valve and dosing pumps as required by the control system. All ready plumbed and wired for easy and quick installation on site. The manifolds are all hydraulically pressure tested before shipping.To be connected on the flow side of the circulating pump and piped to the tower sump or point of low pressure within the system to ensure a good flow of cooling water. Flow switches can be added to the manifolds to inhibit dosing and bleed under no flow conditions. Several systems are listed below:-
BT3605-BPS
Back plate system comprising of the Model BT3605 single biocide timer and dosing pump. 0 - 6 l/Hr against 6 bar
BT3607-BPS
Back plate system comprising of the Model BT3607 dual biocide timer and 2 dosing pumps. 0 - 6 l/Hr against 6 bar
ACW1-BPS
Back plate system comprising of the Model ACW1 bleed & feed controller with 3 dosing pumps. 0 - 6 l/Hr against 6 bar and bleed valve Additional equipment required CTFI20 3/4'' Water meter
C3645-BPS
Back plate systems comprising of Conductivity (TDS) controller with flow line conductivity cell and BSV 075 - 00 3/4'' solenoid valve
ACW2-BPS
Back plate systems comprising of Model ACW2 dual biocide, feed & bleed controller with 3 dosing pump. 0 - 5 l/Hr against 5 bar and 3/4'' solenoid valve Additional equipment required CTFI20 3/4'' Water meter
MO5-CT-CD-BPS
Back plate systems comprising of Model MO5-CT-CD controller dual biocide, flow proportional feed & TDS bleed with 3 dosing pumps. 0 - 6 l/Hr against 6 bar FL310 cell and 3/4'' solenoid valve. Additional equipment required CTFI20 3/4'' Water meter
MO5-CT-RH-BPS
Back plate systems comprising of Model MO5-CT-CD/RH controller Single biocide, Redox controlled oxidising biocide dosing, flow proportional feed & TDS bleed with 3 dosing pump. 0 - 6 l/Hr against 6 bar, FL310 cell RES1-QR ORP electrode and 3/4'' BSP solenoid valve. Additional equipment required CTFI20 3/4'' Water meter
MO5-CT-RH2-BPS Back plate systems comprising of Model MO5-CT-CD/RH controller Single biocide, Redox controlled Bromine dosing, flow proportional feed & TDS bleed with 2 dosing pump. 0 - 5 l/Hr against 5 bar, FL310 cell RES1-QR ORP electrode and 2 x 3/4'' solenoid valves. Additional equipment required CTFI20 3/4'' Water meter Bromine tablet holders to be selected from tablet brominators
Accepta are able to build special backplates to suit your application please call us with your requirments.
31
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Brominators & Corrosion Racks Tablet Holders Low Pressure. 930/OLCF
Off line chemical feeder for installation on a bypass to hold bromine tablets, with removable screw cover for easy filling. Max pressure 40 PSI. Do not fit isolating valves to the outlet.
HC3315
Holds 6.5 Kg of tablets. Max pressure 50 PSI. Do not fit isolating valves to the outlet.
HC3330
Holds 13.6 Kg of tablets. Max pressure 50 PSI. Do not fit isolating valves to the outlet.
-FM
Flow meter range 30 - 175 Ltrs/hr add
PRV050
Brominators must be piped to an open end. If the brominator can become pressurised a pressure relief valve must be fitted and piped to an effluent system. 1/2'' Pressure relief valve
Tablet Holders High Pressure. Blue brominator tablet holders manufactured from specially formulated GRP with removable screw covers for filling. Fitted with flow meter, inlet valve and drain valve all in UPVC. Max pressure 100 psi. BB12-FM
Size 204 mm Ø x 640 mm holds 12 Kg of tablets. With flow meter & valve range 30 - 175 Ltrs/hr.
BB18-FM
Size 260 mm Ø x 640 mm holds 18 Kg of tablets. With flow meter & valve range 50 - 500 Ltrs/hr.
BB36-FM
Size 280 mm Ø x 1150 mm holds 36 Kg of tablets. With flow meter & valve range 100 - 1000 Ltrs/hr.
P.V.C. Corrosion Racks. C R-PVC-4
P.V.C. Corrosion rack fitted with 1'' P.V.C. ball valve, four threaded ports and bosses to hold 4 free issue coupons outlet 1'' B.S.P female. Flow meter Mounted on to PVC back plate
add add
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
32
Boiler Water Control Boiler Blowdown Timed Control. We are able to supply a very simple boiler blowdown system comprising of a dose and delay timer and an electric motorised valve. The valve is opened for a preset time say once an hour for a second preset time say 3 miniutes. We are able to supply other systems including TDS control by conductivity either by hot cell or with a sample cooler please contact our sales office with your requirements.
ABD-T
Boiler blowdown timer with adjustable delay and blowdown timers in a surface mounting enclosure supplied with:Blowdown valve 1/2'' ball valve with electric actuator 10 bar & 200 o C As above but with pneumatic valve and pilot solenoid valve
Condensate Control Many industrial process use steam for heating chemical vats with the used steam being returned to the boiler hot well as condensate in the water phase if this has picked up any process solutions via leaks in the pipe work such as acids this will cause problems when it enters the boiler. As there is a vast change in conductivity when this occurs it can be reliably monitored by our special cell and controller.
C3645 -CC-K
Conductivity controller with digital display adjustable set point range 0 - 200µS. In surface mounting weatherproof enclosure with CP721 conductivity cell with 3/4” BSP thread max temp 120oC. 5 metres LMK2 Connecting cable Dump valve various type can be supplied
Sample Cooler SC-HP-FC
33
Sample cooler with steel body, surface mounting brackets with high pressure fixed stainless coil and regulating valve. Shell pressure 150 P.S.I. Coil pressure 1000 P.S.I. Note We include a regulating valve
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Hot Water Control Low pressure hot water systems are used in many building and industrial premises for various heating applications. The hot water may pass through a variety of different pipe work materials where corrosion can occur. To prevent the corrosion taking place it is usual to dose the pipe work with a corrosion inhibitor. The traditional method is to use a chemical dosing pot where the vessel is isolated and drained. The chemical dosing pot is then manually filled with the chemical the fill valve closed and service valves opened. This process can be made simpler and safer by automating the chemical addition by using a dosing pump either with a shot dose time to add a set volume of reagent or by the use of our conductivity controller. The controller measures a drop in the hot water conductivity usually caused by a leak in the system and automatically adds reagent to bring the solution back up to the desired strength.
Chemical Dosing Pots. Chemical Dosing Pots manufactured in stainless steel with inlet, outlet and air purge valves. Max pressure 150 PSI. CDP 05
5 litres capacity
CDP 10
10 litres capacity
CDP 15
15 litres capacity
CDP 25
25 litres capacity
Shot Dose Timer & Dosing Pump. Simple system comprising of a shot dose timer dosing pump and stainless steel dosing quill to act as a heat sink. AT-BX 10-04 AST1 SS-INJ-Q-600
Dosing pump 0 - 4.0 litres/Hr against 10 bar Shot dose timer various times available Stainless steel injection quill 600 mm long 3m LDPE dosing hose total price
Conductivity Controlled Dosing.
CT2E-P
Back plated mounted system comprising of Conductivity controller with adjustable control relay to control a dosing pump the second relay can be used for alarm purpose and a 4 - 20 mA output for remote monitoring supplied with a PVC manifold and CP621 conductivity cell fitted with ATC ready assembled and tested.
CT2E-SS
As above with mild steel manifold and CP721 cell
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
34
Red Dosing Pumps Electronic HY Series The HY Series of Red dosing pump offer a cost effective dosing solution featuring a PVC head with ceramic ball valves and hose connection for use with 4 x 6 mm LDPE dosing hose making installation and replacement of existing pumps simple, we have 3 models to cover the majority of dosing applications. HY-BL offers two outputs flow ranges 0 to 100% & 0 to 20 % of the rated output, a volt free contact for use with the optional float switch used to stop the pump on low chemical level. All models have power on LED, low level input & switch mode power supply 100 - 240 VAC 50/60 Hz. Model No HY-BL 12-1.5 HY-BL 09-03 HY-BL 06-06
Output L/Hr. Pressure Bar 0 - 1.5 12.0 0 - 3.0 9.0 0 - 6.0 6.0
HY-BC 06-06 HY-MA 06-06
0 - 6.0 0 - 6.0
6.0 6.0
Hose Size 4 x 6 mm 4 x 6 mm 4 x 6 mm
Power 15 Watts 15 Watts 15 Watts
4 x 6 mm 4 x 6 mm
15 Watts 15 Watts
Pump Head PVC
Optional low level float switch supplied with simple mounting bracket to fit onto the foot valve and strainer designed to fit through a standard 50mm diameter port on a chemical drum. When the chemical container is empty the pump stops. FS1 Optional float switch with PVC cable and connector for HY Series dosing pump AC.ST.HY Optional foot mounting bracket to mount the pump on a horizontal surface
AT-BX Series The AT-BX series of red dosing pumps are designed for either surface or foot mounting with the optional mounting bracket. The pumps outputs range from 0 - 1.5 L/Hr to 0 - 60 L/Hr with either PVC or optional PVDF heads and ceramic ball valves for greater chemical resistance when dosing concentrated reagents. The pumps provide a constant flow which is manually adjustable by a control dial with a selectable dual scale of either 0 - 20% or 0 - 100% of the rated output. Hose connections are either 4 x 6 mm or 8 x 12 mm LDPE low density polyethylene hose making the pumps easily interchangeable with any of our existing pumps already installed. Model No
Output L/Hr.
Pressure Bar
AT1-BX 20 -015 AT1-BX 18 - 02
0 - 1.5 0 - 2.0
20.0 18.0
Hose Size PVDF 4x6/7 4x6/7
AT2-BX 12 - 03 AT2-BX 10 - 04 AT2-BX 08 - 05
0 - 3.0 0 - 4.0 0 - 5.0
12.0 10.0 8.0
4x6 4x6 4x6
AT2-BX 02 - 08
0 - 8.0
2.0
4x6
AT3-BX AT3-BX AT3-BX AT3-BX
16 10 08 02 -
07 10 14 18
0 - 7.0 0 - 10 0 - 14 0 - 18
16.0 10.0 8.0 2.0
4x 4x 4x 4x
6 6 6 6
AT4-BX AT4-BX AT4-BX AT4-BX
05 03 02 01 -
20 30 40 60
0 0 0 0
5.0 3.0 2.0 0.5
8 8 8 8
12 12 12 12
AC.ST K-Kit T-BV
35
-
20 30 40 60
x x x x
Pump Head PVC
Pump Head
Optional foot mounting bracket to mount the pump on a horizontal s urface Option for adapators & 3m of 8 x10 PVDF tubing Option for PTFE ball valves in the pump, foot valve and injection fitting
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Red Dosing Pumps Electronic AT-AM Series The AT-AM Series of red dosing pumps offer external control of the pump frequency or number of stokes the pump makes per minute. The control signal maybe by external pacing pulses with the ability to multiply or divide the pulsed signal or proportional to an industry standard 4 - 20 mA control signal. AT series pumps have a switch mode power supply allowing the pump to operate form a AC supply from 100 to 240 VAC 50/60 Hz. Model No PVDF AT1-AM 20 -015 AT1-AM 18 - 02
Output L/Hr. Pressure Bar
0 - 1.5 0 - 2.0
20.0 18.0
AT2-AM 12 AT2-AM 10 AT2-AM 08 AT2-AM 02 -
03 04 05 08
0000-
3.0 4.0 5.0 8.0
12.0 10.0 8.0 2.0
4 4 4 4
x x x x
6 6 6 6
AT3-AM 16 AT3-AM 10 AT3-AM 08 AT3-AM 02 -
07 10 14 18
0 - 7.0 0 - 10 0 - 14 0 - 18
16.0 10.0 8.0 2.0
4x 4x 4x 4x
6 6 6 6
AT4-AM 05 AT4-AM 03 AT4-AM 02 AT4-AM 01 -
20 30 40 60
0 0 0 0
5.0 3.0 2.0 0.5
8 8 8 8
12 12 12 12
-
20 30 40 60
AT1-AT XX - XX AT2-AT XX - XX AT3-AT XX - XX
Hose Size
Pump Head PVC
Pump
Head
4x6/7 4x6/7
x x x x
4x6 4x6 4x6
PMK Series Surface mounting dosing pump with digital display of the pumps output standard stock specifications are polypropylene head PTFE diaphgram cermic ball valve and Viton ‘’O” rings supplied with soft PVC suction hose and ridgid LDPE dosing hose. No cost option for EPDM “O” rings in place of the Viton part No becomes -E, output as per the chart mains supply voltage 230 VAC
PM-Plus Series As the PMK series but with the addition of external control from either external pacing pulses from contacting head water meter or pH controller PFM. User selectable for an industry standard 4 - 20 mA control signal and low level float switch input to stop the pump. Model No PMK 01 -15-V PMK 02 -10-V PMK 05 - 07-V PMK 10 -10-V PMK 20 - 03-V PMK 50 - 01-V -LI PM-Plus PM-Plus PM-Plus PM-Plus PM-Plus PM-Plus
-PVC -PVDF -SS MFS MB-PM
01 02 05 10 20 50
-15-V -10-V - 07-V -10-V - 03-V - 01-V
Output L/Hr. Pressure Bar Hose Size Power Watts 1 15 4X6 14 2 10 4X6 14 5 7.0 4X6 14 10 10 4X6 14 20 3.0 4x6 14 42 1.0 8 X 12 14 Addition of low level input for to stop the pump for PMK Series add 1 2 5 10 20 42
15 10 7.0 10 3.0 1.0
4X6 4X6 4X6 4X6 4x6 8 X 12
14 14 14 14 14 14
Fitted PVC head in place of the standard PP head add Fitted PVDF head in place of the standard PP head add Fitted SS head in place of the standard PP head add Optional float switch and mounting bracket fits onto the foot valve Optional foot mounting bracket for mounting on flat horzantal surface
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
36
Red Electronic Metering Pump Accessories To compliment Accepta’s range of AT1-4 Red Dosing Pump we are able to offer a wide range accessories to help you build a complete dosing system. Every dosing system should have a foot valve comprising of filter and a non return valve so the pump does not lose its prime. An injection fitting with a non return valve to prevent any back feeding from a pressurised system, when dosing into a pipe under pressure. If dosing down hill an anti syphon valve or multi function is essential to stop the chemical reagent syphoning through the pump.
Foot Valves AC-FP Part No
Material
Hose
Seals
Valve
10414PVC 10414EPVC
PVC PVC
4x6 4x6
Viton EPDM
Ceramic Ceramic
10414PVCGP 10414EPVCGP
PVC PVC
8x12 8x12
Viton EPDM
Ceramic Ceramic
10414P 10414EP
PVDF PVDF
4x6 4x6
Viton EPDM
Ceramic Ceramic
10414PGP 10414EPGP
PVDF PVDF
8x12 8x12
Viton EPDM
Ceramic Ceramic
Part No
Material
Hose
Seals
Valve
10413PVC 10413EPVC
PVC PVC
4x6 4x6
Viton EPDM
Ceramic Ceramic
10413PVCGP 10413EPVCGP
PVC PVC
8x12 8x12
Viton EPDM
Ceramic Ceramic
10413P 10413EP
PVDF PVDF
4x6 4x6
Viton EPDM
Ceramic Ceramic
10413GP 10413EPGP
PVDF PVDF
8x12 8x12
Viton EPDM
Ceramic Ceramic
Injection Valves
Antisyphon / Loading Valves AC-VS Part No 10400V 10400E
Adjustable valve in PVC with Viton seals 0.5 -10 Bar Adjustable valve in PVC with EPDM seals 0.5 -10 Bar
Multifunction Valves AC-VM-PVDF New improved multifunction valve featuring anti-syphon, back pressure & safety valve functions in one valve with adjustable back pressur of 0 - 5.0 bar and safty valve adjustable 0 - 18.0 bar available for pumps with 6 mm and 12 mm dosing hoses with either EPDM or Viton seals Part No 11243-PVDF 11243LP-PVDF 11243GP 11243
37
MF valve MF valve MF valve MF valve
in PVDF for 4 in PVDF for 4 in PVDF for 8 in PVDF for 8
x x x x
6 tubing with Viton seals 6 tubing with EPDM seals 12 tubing with Viton seals 12 tubing with EPDM seals
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Red Electronic Metering Pump Accessories Flow Sensors AC-SF Flow sensor are used for detecting each time a red dosing pump make a stroke by providing a volt free contact closure with adjustable sensitivity. This maybe connected to either a ATMT series pump or remote PLC where the flow can be verified or totalised. AC-SF 10402 AC-SF 10402A
For 4 x 6 LDPE tube with Viton seals For 8 x 12 LDPE tube with Viton seals
Degassing Head PVC auto degassing head for models AT1, 2 or 3 automatic air bleed of the pump head flow is reduced depending upon the amount of gas in the liquid being dosed. 7175 Degassing head for 4 x 6 LDPE tube Viton seals
Injection Quills Part No
Material
Fitting
Seals
Valve
AC-VEI 11377 AC-VEI 11376 AC-VEI 11219FS AC-VEI 11219
PVC PVC PVC PVC
1/2'' 1/2'' 1/2'' 1/2''
Viton EPDM Viton EPDM
None None PVC PVC
SS-INJ - Q
SS 316
1/2'' BSP
PTFE
SS 316
BSP BSP BSP BSP
Suction Lance Assemblies Suction lance assemblies are designed to go into the chemical container with a cone shaped rubber bung to fit into the container discharge port. The suction lance featurers a builtin foot valve and low level float switch. AC.LA.05 AC.LA.05A
For 50 Litre tank with float switch 3/8" for 4 x 6 mm tube. For 50 Litre tank with float switch 1/2" for 8 x 12 mm tube
AC.LA.1 AC.LA.1A
For 100 Litre tank with float switch 3/8" for 4 x 6 mm tube. For 100 Litre tank with float switch 1/2" for 8 x 12 mm tube
AC.LA.2 AC.LA.2A
For 200 Litre tank with float switch 3/8" for 4 x 6 mm tube. For 200 Litre tank with float switch 1/2" for 8 x 12 mm tube
AC.LA.3 AC.LA.3A
For 300 Litre tank with float switch 3/8" for 4 x 6 mm tube. For 300 Litre tank with float switch 1/2" for 8 x 12 mm tube
AC.LA.5/10 AC.LA.5/10A
For 500 Litre tank with float switch 3/8" for 4 x 6 mm tube. For 500 Litre tank with float switch 1/2" for 8 x 12 mm tube
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
38
Red Electronic Metering Pump Accessories Dosing Hose. Low Density Polyeythlyne 4/6 LPE 4 x 6 mm L.D.P.E. Dosing tubing 30 metre coil 4/8LPE. 4 x 8 mm L.D.P.E. Dosing tubing 30 metre coil 8/12 LPE 8 x 12 mm L.D.P.E. Dosing tubing 30 metre coil
High Density Polyeythlyne 6/8 HPE. 6 x 8 mm HD.P.E. Dosing tubing 30 metre coil
Teflon/PTFE 4/6 PTFE 8/12 PTFE
4 x 6 mm PTFE. Dosing tubing 30 metre coil 8 x 12 mm PTFE. Dosing tubing 30 metre coil
PVDF Dosing Tube 4/6 PVDF. 8/10 PVDF
4 x 6 mm PVDF. Dosing tubing 30 metre coil 8 x 10 mm PVDF. Dosing tubing 30 metre coil
Clear PVC Hose 4/6 PVC 8/12 PVC
4 x 6 mm Clear PVC tubing 30 metre coil 8 x 12 mm Clear PVC tubing 30 metre coil
Clear Reinforced Braided PVC Hose 0375RPVC 3/8'' Ø ID Reinforced PVC tubing 30 metre coil 0500RPVC 1/2'' Ø ID Reinforced PVC tubing 30 metre coil 0750RPVC 3/4'' Ø ID Reinforced PVC tubing 30 metre coil 100.0RPVC 1.0'' Ø ID Reinforced PVC tubing 30 metre coil 125.0RPVC 1.1/4'' Ø ID Reinforced PVC tubing 30 metre coil Dosing hose must be protected from frost and direct sunlight. Ensure hose is compatible with the chemical you are dosing.
39
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Peristaltic Pumps Peristaltic Pump For simple intermittent dosing applications where no pressure is required peristaltic pumps offer a cost effective solution. SWP1-F-3
Small wheel peristaltic pump fixed speed output 3.0 L/Hr max duty cycle 15 mins fitted santoprene tubing mains supply 230 VAC Supplied in batches of 5 price each Supplied in batches of 10 price each
SWP1-V-5
Small wheel peristaltic pump selectable output 0.4 to 4.7 L/Hr max duty cycle 15 mins fitted santoprene tubing, mains supply 230 VAC Supplied in batches of 5 price each Supplied in batches of 10 price each SWP2-F-7
Small wheel peristaltic pump fixed speed output 7.0 L/Hr max duty cycle 15 mins fitted santoprene tubing mains supply 230 VAC Supplied in batches of 5 price each Supplied in batches of 10 price each
SWP2-V-15
Small wheel peristaltic pump selectable output 1.5 to 15.0 L/Hr max duty cycle 15 mins fitted santoprene tubing mains supply 230 VAC Supplied in batches of 5 price each Supplied in batches of 10 price each
BWP120
Big wheel peristaltic pump output 30, 60. 90 or 120 L/Hr selectable via internal jumper max duty cycle 15 mins mains supply 230 VAC Supplied in batches of 5 price each Supplied in batches of 10 price each
TPD-M
Timed peristaltic dosing with 7 day real time clock providing upto 5 timed doses per day pump output 1.5 L/Hr 230 VAC mains powered Supplied in batches of 5 price each Supplied in batches of 10 price each
TPD-B
Timed peristaltic dosing with 7 day real time clock providing upto 5 timed doses per day pump output 0.4 L/Hr battery powered Supplied in batches of 5 price each Supplied in batches of 10 price each
Spares and Accessories As the pump tubing on peristaltic pump is a consumable i tem you are recommended to carry some spares which maybe ordered as follows. SWPP1T-SP SWPP1T-EP SWPP1T-SC
Small wheel peri pump 1 tubing in Santoprene 6.5x10 Small wheel peri pump 1 tubing in EPDM 6.5x10 Small wheel peri pump 1 tubing in Silcone 6.5x10 Fits pumps SWP-F3, SWP-V5 and TDP-M & B
SWPP2T-SP SWPP2T-EP SWPP2T-SC
Small wheel peri pump 1 tubing in Santoprene 8x12 Small wheel peri pump 1 tubing in EPDM 8x12 Small wheel peri pump 1 tubing in Silcone 8x12 Fits pumps SWP1-F7 & SWP-V15
BWPPT-SP BWPP2T-EP BWPP2T-SC
Big wheel peri pump 1 tubing in Santoprene 10x16 Big wheel peri pump 1 tubing in EPDM 10x16 Big wheel peri pump 1 tubing in Silcone 10x16 Fits pumps BWP120
IFS-PP1 IFS-PP2
Injection fitting small wheel peripump 4 x 6 tubing Injection fitting small wheel peripump 8 x 12 tubing
FF-PP1 FF-PP2
Foot filter and weight small wheel peripump 4 x 6 tubing Foot filter and weight small wheel peripump 8 x 12 tubing
4/6 PVC 8/12PVC
4 x 6 mm Clear PVC tubing 30 metre coil 8 x 12 mm Clear PVC tubing 30 metre coil
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
40
Mechanical Piston Dosing Pumps TAP 15 Series Piston Pumps with 15mm stroke PVC/SS heads & valves with BSP connectors. Motors 400 volt three phase. Model No
L/Hr
0 - 1.5 0 - 2.0 0 - 3.0
Bar SS 20.0 20.0 20.0
Bar Strokes Connections PVC Min 10.0 58 1/4 '' Gas 10.0 78 1/4 '' Gas 10.0 116 1/4 '' Gas
TAP15-6 -58 TAP15-6 -78 TAP15-6 -116
Motor Kw 0.18 Kw 0.18 Kw 0.18 Kw
TAP15-11 -58 TAP15-11 -78 TAP15-11 -116
0 - 5.5 0 - 6.5 0 - 10
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
1/4 '' Gas 1/4 '' Gas 1/4 '' Gas
0.18 Kw 0.18 Kw 0.18 Kw
TAP15-17 -58 TAP15-17 -78 TAP15-17 -116
0 - 11 0 - 15 0 - 22
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.18 Kw 0.18 Kw 0.18 Kw
TAP15-25 -58 TAP15-25 -78 TAP15-25 -116
0 - 25 0 - 32 0 - 50
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.18 Kw 0.18 Kw 0.18 Kw
TAP15-30 -58 TAP15-30-78 TAP15-30 -116
0 - 35 0 - 45 0 - 70
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAP15-38 -58 TAP15-38 -78 TAP15-38 -116
0 - 55 0 - 73 0 - 110
17.0 17.0 17.0
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAP15-48 -58 TAP15-48 -78 TAP15-48 -116
0 - 85 0 - 114 0 - 170
10.0 10.0 10.0
10.0 10.0 10.0
58 78 116
1/2 '' Gas 1/2 '' Gas 1/2 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAP15-54 -58 TAP15-54 -78 TAP15-54 -116
0 - 110 0 - 145 0 - 220
8.0 8.0 8.0
8.0 8.0 8.0
58 78 116
1/2 '' Gas 1/2 '' Gas 1/2 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAP15-64 -58 TAP15-64 -78 TAP15-64 -116
0 - 152 0 - 204 0 - 304
6.0 6.0 6.0
6.0 6.0 6.0
58 78 116
3/4 '' Gas 3/4 '' Gas 3/4 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
S/Steel
PVC
TAP 25 Series Piston Pumps with 25mm stroke PVC/SS heads & valves with BSP connectors. Motors 400 volt three phase. Model No
L/Hr
0 - 40 0 - 53 0 - 80
Bar SS 20.0 20.0 20.0
Bar Strokes Connections Motor PVC Min Kw 10.0 58 3/8 '' Gas 0..25 Kw 10.0 78 3/8 '' Gas 0..25 Kw 10.0 116 3/8 '' Gas 0..25 Kw
TAP25-25 -58 TAP25-25 -78 TAP25-25 -116 TAP25-30 -58 TAP25-30 -78 TAP25-30 -116
0 - 55 0 - 70 0 - 112
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0..25 Kw 0..25 Kw 0..25 Kw
TAP25-38 -58 TAP25-38 -78 TAP25-38 -116
0 - 90 0 - 120 0 - 180
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
1/2 '' Gas 1/2 '' Gas 1/2 '' Gas
0.55 Kw 0.55 Kw 0.55 Kw
TAP25-48 -58 TAP25-48 -78 TAP25-48 -116
0 -140 0 -190 0 - 284
20.0 20.0 20.0
10.0 10.0 10.0
58 78 116
1/2 '' Gas 1/2 '' Gas 1/2 '' Gas
0.55 Kw 0.55 Kw 0.55 Kw
TAP25-54 -58 TAP25-54-78 TAP25-54 -116
0 - 180 0 - 242 0 - 365
15.0 15.0 15.0
10.0 10.0 10.0
58 78 116
1/2 '' Gas 1/2 '' Gas 1/2 '' Gas
0.55 Kw 0.55 Kw 0.55 Kw
TAP25-64 -58 TAP25-64 -78 TAP25-64 -116
0 - 250 0 - 335 0 - 505
10.0 10.0 10.0
10.0 10.0 10.0
58 78 116
3/4 '' Gas 3/4 '' Gas 3/4 '' Gas
0.75 Kw 0.75 Kw 0.75 Kw
TAP25-76 -58 TAP25-76 -78 TAP25-76 -116
0 - 365 0 - 485 0 - 730
7.0 7.0 7.0
7.0 7.0 7.0
58 78 116
1 '' Gas 1 '' Gas 1 '' Gas
0.75 Kw 0.75 Kw 0.75 Kw
TAP25-89 -58 TAP25-89 -78 TAP25-89 -116
0 - 495 0 - 660 0 - 1000
5.0 5.0 5.0
5.0 5.0 5.0
58 78 116
1 '' Gas 1 '' Gas 1 '' Gas
0.75 Kw 0.75 Kw 0.75 Kw
S/Steel
Single Phase Motors Pumps with 0.18 Kw motors for single phase will be fitted with 0.25 kW 230 VAC Motors add Pumps with 0.25 Kw motors for single phase will be fitted with 0.37 kW 230 VAC Motors add Pumps with 0.37 Kw motors for single phase will be fitted with 0.55 kW 230 VAC Motors add Pumps with 0.55 Kw motors for single phase will be fitted with 0.75 kW 230 VAC Motors add Pumps with 0.75 Kw motors for single phase will be fitted with 0.75 kW 230 VAC Motors add
41
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
PVC
Mechanical Diaphragm Dosing Pumps TAM - 2S Series Mechanical diaphragm dosing pumps have adjustable stroke length control. Motors 400 volt three phase. Model No
L/Hr.
TAM2S-041 TAM2S-058 TAM2S-082 TAM2S-116 TAM2S-160
0 0 0 0 0
-
15 20 30 42 60
Bar
5.0 5.0 5.0 5.0 5.0
Strokes / Min 41 58 82 116 116
Connections
Motor Kw 0.09 Kw 0.09 Kw 0.09 Kw 0.09 Kw 0.09 Kw
S/Steel
Polyprop
S/Steel
Polyprop
3/8 '' Gas 3/8 '' Gas 3/8” Gas
Motor Kw 0.25 Kw 0.25 Kw 0.25 Kw
PVC
PVDF
1/2 '' 1/2 '' 1/2 '' 1/2 '' 1/2 ''
Gas Gas Gas Gas Gas
TAM 2, 4, 6 Series With Stainless steel or PP Heads Motors 400 volt three phase. Model No
L/Hr
Bar
TAM2-94 - 58 TAM2-94 - 78 TAM2-94 - 116
0 - 20 0 - 26 0 - 40
10.0 10.0 10.0
Strokes / Min 58 78 116
Connections
TAM4-108 - 58 TAM4-108 - 78 TAM4-108 - 116
0 - 60 0 - 80 0 - 120
10.0 10.0 10.0
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAM6-138 - 58 TAM6-138 - 78 TAM6-138 - 116
0 - 155 0 - 220 0 - 310
7.0 7.0 7.0
58 78 116
3/8 '' Gas 3/8 '' Gas 1 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAM6-165 - 58 TAM6-165 - 78 TAM6-165 - 116
0 - 230 0 - 330 0 - 460
5.0 5.0 5.0
58 78 116
1 '' Gas 1 '' Gas 1 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
TAM 2, 4, 6 Series With PVC or PVDF Heads Motors 400 volt three phase. Model No
L/Hr
Bar
TAM2-94 - 58 TAM2-94 - 78 TAM2-94 - 116
0 - 20 0 - 26 0 - 40
10.0 10.0 10.0
Strokes / Min 58 78 116
TAM4-108 - 58 TAM4-108 - 78 TAM4-108 - 116
0 - 60 0 - 80 0 - 120
10.0 10.0 10.0
TAM6-138 - 58 TAM6-138 - 78 TAM6-138 - 116
0 - 155 0 - 220 0 - 310
TAM6-165 - 58 TAM6-165 - 78 TAM6-165 - 116
0 - 230 0 - 330 0 - 460
Connections
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
Motor Kw 0.25 Kw 0.25 Kw 0.25 Kw
58 78 116
3/8 '' Gas 3/8 '' Gas 3/8 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
7.0 7.0 7.0
58 78 116
3/8 '' Gas 3/8 '' Gas 1 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
5.0 5.0 5.0
58 78 116
1 '' Gas 1 '' Gas 1 '' Gas
0.37 Kw 0.37 Kw 0.37 Kw
Motor Options Standard motor is 400 volt 3 phase for 230 volt 0.09 Kw single phase motor (add) Standard motor is 400 volt 3 phase for 230 volt 0.25 Kw single phase motor (add) Standard motor is 400 volt 3 phase for 230 volt 0.55 Kw single phase motor (add) Ex D Three phase motor upto 0.55 Kw (add) Servo motor requires 24 volt supply for auto stroke control from 4 - 20 mA signal (add)
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
42
Mechanical Dosing Pump Accessories Foot Valves Foot valve for pumping with a suction lift from a chemical container . FV-0375-PVC Foot Valve with filter in PVC 3/8'' BSP 0 - 50 L/Hr FV-0500-PVC Foot Valve with filter in PVC 1/2'' BSP 0 - 200 L/Hr FV-0750-PVC Foot Valve with filter in PVC 3/4'' BSP 0 - 400 L/Hr FV-1000-PVC Foot Valve with filter in PVC 1'' BSP 0 - 1000 L/Hr FV-0375-SS FV-0500-SS FV-1000-SS
Foot Valve with filter in S’ steel 3/8'' BSP 0 - 50 L/Hr Foot Valve with filter in S’ steel 1/2'' BSP 0 - 200 L/Hr Foot Valve with filter in S’ steel 1'' BSP 0 - 1000 L/Hr
Injection Valves Injection valve with built in NRV for dosing into pipes or vessels IV-0375-PVC IV-0500-PVC IV-0750-PVC IV-1000-PVC
Injection Injection Injection Injection
/ / / /
NRV NRV NRV NRV
BPV-0250-SS BPV-0375-SS BPV-0500-SS BPV-0750-SS BPV-1000-SS
Back pressure / Back pressure / Back pressure / Back pressure / Back pressure /
Valve Valve Valve Valve NRV NRV NRV NRV NRV
in PVC in PVC in PVC in PVC
3/8'' BSP 0 - 50 L/Hr 1/2'' BSP 0 - 200 L/Hr 3/4'' BSP 0 - 400 L/Hr 1'' BSP 0 - 1000 L/Hr
Valve in SS 1/4'' BSP 0 - 25 L/Hr Valve in SS 3/8'' BSP 0 -100 L/Hr Valve in SS 1/2'' BSP 0 - 200 L/Hr Valve in SS 3/4'' BSP 0 - 500 L/Hr Valve in SS 1'' BSP 0 - 1000 L/Hr
Loading / Pressure Relief Valves Adjustable relief / safety valve 1 - 10 bar.
Typical Installation
43
PRV-0500-PVC PRV-0750-PVC PRV-1000 -PVC
Pressure relief valve in PVC 1/2'' BSP 0 - 200 L/Hr Pressure relief valve in PVC 3/4'' BSP 0 - 500 L/Hr Pressure relief valve in PVC 1'' BSP 0 - 1000 L/Hr
PRV-0500-PVDF PRV-0750-PVDF PRV-1000-PVDF
Pressure relief valve in PVDF 1/2'' BSP 0 - 200 L/Hr Pressure relief valve in PVDF 3/4'' BSP 0 - 500 L/Hr Pressure relief valve in PVDF 1'' BSP 0 - 1000 L/Hr
PRV-0500-SS PRV-0750-SS PRV-1000-SS
Pressure relief valve in SS 1/2'' BSP 0 - 200 L/Hr Pressure relief valve in SS 3/4'' BSP 0 - 500 L/Hr Pressure relief valve in SS 1'' BSP 0 - 1000 L/Hr Typical installation of a dosing pump with flooded suction from a dosing tank. The dosing tank is mounted on one of our flooded suction kit which incorporates a polypropylene stand to raise the tank so the reagent can flow into the pump by gravity. An isolating valve is fitted before the pump to isolate the pump for maintenance and an inline strainer to prevent any particles entering the pump. The discharge from the pump has a sampling valve, which also maybe opened to relieve any pressure in the discharge line. The pressure relief or safety valve diverts the pump flow back into the storage tank in the event of the discharge becoming blocked. The loading valve provides the pump with some pressure to work against and acts as an anti syphon valve when dosing to a point lower than the dosing pump and tank set IE into a pit or sump. A second drain valve can be fitted to drain the discharge pipework where the reagent is being pumped some distance into a pipe or vessel under pressure. Not shown is an injection fitting with a non return valve for dosing into a pipe under pressure to prevent the flow in the pipe back feeding through the pump and into the dosing tank.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Dosing & Storage Tanks Dosing Tanks. Robust moulded natural MDPE dosing tanks with black screw fitting lid with raised section to mount dosing pump, mixer and level sensors etc. DT 50 50 Litre Dosing Tank Dia. 425 x H 500 mm DT 100 100 Litre Dosing Tank Dia. 497 x H 698 mm DT 200 200 Litre Dosing Tank Dia. 635 x H 782 mm DT 300 300 Litre Dosing Tank Dia. 660 x H 1074 mm DT 500 500 Litre Dosing Tank Dia. 815 x H 1100 mm DT 1000 1000 Litre Dosing Tank Dia.1062 x H 1350 mm. For black tanks add 10% to above prices
Bund Tanks. BT 25 25 Litre Dosing Tank Bund Dia. 680 x H 285 mm BT 50 50 Litre Dosing Tank Bund Dia. 685 x H 288 mm BT 100 100 Litre Dosing Tank Bund Dia. 806 x H 325 mm BT 200 200 Litre Dosing Tank Bund Dia. 970 x H 400 mm BT 300 300 Litre Dosing Tank Bund Dia. 940 x H 620 mm BT 500 500 Litre Dosing Tank Bund Dia. 1130 x H 680mm BT 1000 1000 Litre Dosing Tank Bund Dia. 1830 x H 1160mm Sizes in natural MDPE with open top and rolled over top edge.
Storage Tanks. One piece vertical single wall chemical storage tanks moulded in black MDPE designed for ambient temperature solutions at atmospheric pressure with an SG of up to 1.2 With 600 mm dia hinged manway, for outdoor installation. Supplied plain for customers to fit their own fitting to suit their installation. C C C C
1800 2600 5500 10000
1800 2500 5000 9400
Litre Litre Litre Litre
Storage Storage Storage Storage
Tank Tank Tank Tank
Dia. 1400 Dia. 1580 Dia. 2000 Dia. 2200
x x x x
H H H H
1500 mm 1665 mm 2173 mm 3000 mm
Sizes are approx dia x height Tanks with double skined can be supplied also heavy duty tanks for solutions with higher SGs. Fittings can be supplied ready moulded in place.
Dosing Tanks Flooded Suction Kits Tank mounting frame with a mounting for bracket for one vertical mounting pump For use solutions with a high viscosity or a low vapour pressure (hypochlorite) Providing ease of priming and consistent dosing. FSK 50 Stand for 50 L. tank & mounting for one small pump. FSK 100 Stand for 100 L. tank & mounting for one pumps. FSK 200 Stand for 200 L. tank & mounting for one pumps. FSK 300 Stand for 300 L. tank & mounting for one pumps. MB-HP Mounting bracket for horizontal mounting pump with bolts add BV-TC PVC Ball valve, tank connector & LDPE hose supplied loose. DBV-TC Dual ball valves & tank connectors for 2 pumps Use one size larger bund when using pump flooded suction kits Items supplied loose for assembly on site by your engineers.
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
44
Mixers Hand & High Speed Hand Mixers Hand mixers are for mounting on top of our DT range of MDPE dosing tanks made in PVC they are ideal for simple mixing tasks. We offer two types the stumping type where the mixer is moved up and down in the liquid and the conventional rotating type. HM-S HM-R BBP
Hand operated stumping mixer in PVC. with mounting flange. Hand operated rotating mixer in PVC. with mounting flange. Four polypropylene nuts and bolts for mounting hand mixers
Electric Mixers High Speed High speed mixers are ideal for many mixing duties from simple dosing tank to mixing effluent sumps pits or tanks. When using high speed mixers you must ensure the vessel being mixed is always full of liquid as damage will occur to the mixer and tank if the vessel is not always full. Note our mixers are fitted with 316 SS three bladed marine propellers.
AMV-9
Mixer with PVC mounting flange, PVC sheathed stell shaft and PVC propeller with a 930 mm long shaft. Fitted 240 VAC 0.18 kW motor for use in vessels up to 400 litres capacity.
Mixers with marine type propeller & shaft in 316 stainless steel.
45
TM0
Mixer with 3'' Ø propeller fitted 0.18 kW 415 volt motor
TM0 - SP2
Mixer with 3'' Ø propeller fitted 0.18 kW 240 volt motor
TM1
Mixer with 4'' Ø propeller fitted 0.37 kW 415 volt motor
TM1 - SP2
Mixer with 4'' Ø propeller fitted 0.37 kW 240 volt motor
TM2
Mixer with 6'' Ø propeller fitted 0.55 kW 415 volt motor
TM3
Mixer with 7'' Ø propeller fitted 0.75 kW 415 volt motor
TM4
Mixer with 8'' Ø propeller fitted 1.5 kW 415 volt motor
-EVA
TM mixer shaft & propeller with EVA coating for greater chemical resistance Add
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Mixers Geared Electric Mixers Geared Geared mixers with worm driven gearbox & larger dia flat bladed impeller 316 stainless steel fitted 10:1 or 5:1 reduction ratio depending upon the duty required (AML-9 has a PVC sheathed shaft and impeller running at 65 RPM) AML-9
Geared mixer with 930 mm shaft & 200 mm diameter impeller fitted 230 VAC motor
GMW0
Geared mixer with 10'' Ø impeller fitted 0.09 kW motor 415 volt
GMW1
Geared mixer with 10'' Ø impeller fitted 0.18 kW motor 415 volt Geared mixer with 10'' Ø impeller fitted 0.18 kW motor 240 volt Geared mixer with 10'' Ø impeller fitted 0.18 kW motor 110 volt
GMW1-SP2 GMW1-SP1
GMW11 GMW11-SP2 GMW11-SP1
GMW2 GMW21
GMW3 GMW31
GMW4 GMW41
-EVA1/2 -EVA3/4
Geared mixer with 10'' Ø impeller fitted 0.37 kW motor 415 volt Geared mixer with 10'' Ø impeller fitted 0.37 kW motor 240 volt Geared mixer with 10'' Ø impeller fitted 0.37 kW motor 110 volt Geared mixer with 12'' Ø impeller fitted 0.55 kW motor 415 volt Geared mixer with 12'' Ø impeller fitted 0.75 kW motor 415 volt Geared mixer with 16'' Ø impeller fitted 1.1 kW motor 415 volt Geared mixer with 16'' Ø impeller fitted 1.5 kW motor 415 volt Geared mixer with 20'' Ø impeller fitted 2.2 kW motor 415 volt Geared mixer with 20'' Ø impeller fitted 3.0 kW motor 415 volt GWM1 or 2 mixer shaft & impeller with EVA coating for greater chemical resistance Add GWM3 or 4 mixer shaft & impeller with EVA coating for greater chemical resistance Add
Tank Tops Mountings Strengthened plates for dosing tank tops to hold dosing pumps and/or mixers. PVC-MP-A PVC-MP-B SSMB -F
PVC plate to hold the equipment. DT 50 - DT300 PVC plate to hold the equipment. DT 500 - DT1000 SS/PVC bridge to hold the equipment. DT 300 - DT1000 Fitting charge for mixer and single pump
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
46
Solenoid and Control Valves Direct Operating Brass Solenoid Valves N/C Solenoid valve for water, neutral liquid and gaseous media brass body with female BSP. threaded ports. Standard diaphragms are NBR with FPM to order. Part No
BSV-050-00 BSV-075-00 BSV-100-00
Size BSP. Min PSI
1/2'' 3/4'' 1''
0 PSI 0 PSI 0 PSI
Max PSI Solution o C
90 PSI 90 PSI 90 PSI
90oC 90oC 90oC
Voltage
24, 115, 230v AC 24, 115, 230v AC 24, 115, 230v AC
Pilot Operated Brass Solenoid Valves High Temp BSV-050-05HT BSV-075-05HT BSV-100-05HT
1/2” 3/4'' 1''
7 PSI 7 PSI 7 PSI
120 PSI 120 PSI 120 PSI
170oC 170oC 170oC
24, 115, 230v AC 24, 115, 230v AC 24, 115, 230v AC
90oC 90oC 90oC 90oC 90oC
24, 24, 24, 24, 24,
Pilot Operated Brass Solenoid Valves N/C BSV-050-05 BSV-075-05 BSV-100-05 BSV-150-05 BSV-200-05
1/2'' 3/4'' 1'' 1 1/2'' 2''
8 8 8 8 8
PSI PSI PSI PSI PSI
150 150 150 150 150
PSI PSI PSI PSI PSI
115, 115, 115, 115, 115,
230v 230v 230v 230v 230v
AC AC AC AC AC
Brass Solenoid Valve Three Port. Three port brass bodied solenoid valve use as a pilot valve to operate the air to a pneumatic valve. BSV-025-3PT
1/4”
0 PSI
120 PSI
90oC
24, 115, 230v AC
Plastic Solenoid Valve Normally Closed. Servo operating Plastic bodied solenoid valve with internal components in stainless steel PSV-075-03
3/4'' male
3 PSI
90 PSI
60oC
24, 115, 230v AC
Pneumatic Valves Fail Safe to Close. Pneumatic dosing valve with plastic body and PTFE seals for chemical use requires pilot valve PDV050 PDV075 PDV100 PDV150 PDV200
1/2'' 3/4'' 1'' 1 1/2'' 2''
0 0 0 0 0
PSI PSI PSI PSI PSI
50 50 50 50 50
PSI PSI PSI PSI PSI
40oC 40oC 40oC 40oC 40oC
Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
Pneumatic valve with bronze body and PTFE seals for neutral liquid and steam requires pilot valve BPV075 3/4” 0 PSI 150 PSI 120oC Pneumatic BPV100 1” 0 PSI 150 PSI 120oC Pneumatic Three port pneumatic divertor valve with bronze body and PTFE seals requires pilot valve. 3PBPV100 3PBPV150 3PBPV200
47
1” 1 1/2” 2”
0 PSI 0 PSI 0 PSI
150 PSI 150 PSI 150 PSI
120oC 120oC 120oC
Pneumatic Pneumatic Pneumatic
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
Control Valves & Transfer Pumps Actuated Ball Valves Stainless steel ball valves operated by either pneumatic actuator which will require a pilot solenoid valve or by servo motor, power to open and power to close Part No
Size BSP.
Min PSI
Max PSI
Solution o C
Voltage
230v AC
Electric Valves
SMV-050-00
1/2''
0 PSI
250 PSI
SMV-075-00
3/4''
0 PSI
250 PSI
205oC 205oC
230v AC
230v AC
1''
0 PSI
250 PSI
205oC
SPV-050-00
1/2''
0 PSI
250 PSI
Air
SPV-075-00 SPV-100-00
3/4'' 1''
0 PSI 0 PSI
250 PSI 250 PSI
205oC 205oC 205oC
BS-050
1/2''
0 PSI
250 PSI
-
BS-075
3/4''
0 PSI
250 PSI
200oC 200oC
BS-100
1''
0 PSI
250 PSI
200oC
-
195oC 195oC
-
SMV-100-00 Pneumatic Valves
Air Air
Bronze Strainers
-
Bronze Regulating Valves
BRV-050
1/2''
0 PSI
250 PSI
BRV-075 BRV-100
3/4'' 1''
0 PSI 0 PSI
250 PSI 250 PSI
195oC
-
Double Diaphragm Pneumatic Pumps Double diaphragm pneumatic pumps in 4 sizes for pumping liquids and slurries. The body is moulded in polypropylene and fitted with either nitrile or PTFE diaphragm allowing a wide range of products to be pumped. Sizes 1/2” to 2” the output maybe adjusted by varying the air pressure to the pump. Model NoBody
Diaphragm
Size Liquid
Size Air
Max output.
Weight
E5PP-E
PP
Nitrile
1/2'' Threaded
3/8''
53 L/Min.
4.6 Kg
E5PP-T
PP
PTFE
1/2'' Threaded
3/8''
53 L/Min.
4.6 Kg
E1PA-E E1PA-T
PP PP
Nitrile PTFE
1'' Flanged 1'' Flanged
3/8'' 3/8''
132 L/Min. 132 L/Min.
10.9 Kg 10.9 K
E4PA-E
PP
Nitrile
1 1/2'' Flanged
1/2''
265 L/Min.
18.6 Kg
E4PA-T E2PA-E
PP PP
PTFE Nitrile
1 1/2'' Flanged 2'' Flanged
1/2'' 1/2''
265 L/Min. 586 L/Min.
18.6 Kg 33.0 Kg
E2PA-T
PP
PTFE
2” Flanged
1/2''
586 L/Min.
33.0 Kg.
Hand Pump Hand pump in PVC with either Viton or EPDM diaphragm use for transfering chemical reagent from suppliers carbouy into a chemical dosing tank can be mounted onto the dosing tank as shown HP1-V HP1-E
Hand pump with Viton diaphragm Hand pump with EPDM diaphragm
FHP1
Fitting of hand pump to dosing tank
Web: www.accepta.com | E-mail:
[email protected] | Tel: +44 (0) 161 877 2334
48