CHS - Certified Hydraulic Specialist

Published on March 2017 | Categories: Documents | Downloads: 50 | Comments: 0 | Views: 488
of 4
Download PDF   Embed   Report

Comments

Content

Delivery Type: Group Live | Pre-requisites: None | Level: Advanced This Program is worth 35 NASBA CPE credits & 2.4 CEU (Continuing Education Units)

Certified Hydraulic Specialist

REViEW SESSioN

6-10 April

Dubai

2014

UAE

Organized by

In Partnership with:

Certified by

Certified Hydraulic Specialist | 6-10 April 2014 | Dubai, UAE

GENERAL INFORMATiON

Dr. Medhat Khalil
Medhat Khalil, Ph.D. Director of Professional Education & Research Development at the Applied Technology Center, Milwaukee School of Engineering, Milwaukee, WI, USA. Medhat has constantly been working on his academic development through the years, starting from Bachelor and Masters Degree in Mechanical Engineering at Military Technical College in Cairo, Egypt proceeding with his 1st and 2nd PH.D. on Philosophy in Mechanical Engineering and his Post-Doctoral Industrial Research Fellowship at Concordia University in Montreal, Quebec. He has received certificates and is a member of many grand name institutions such as: Director of Professional Education at Milwaukee School of Engineering, WI, USA.; Certified Hydraulic Specialist by the International Fluid Power Society IFPS; Certified Accredited Fluid Power Instructor by the International Fluid Power Society IFPS; Member of Center for Compact and Efficient Fluid Power Engineering Research Center (CCEFP); Listed fluid power consultant by the National Fluid Power Association (NFPA); Member of the board at the International Fluid Power

Expert Trainer
Society (IFPS); President and Technical Director of CompuDraulic; Member of American Society of Mechanical Engineers (ASME). Having worked as Director of Professional Education and Research Development at Applied Technology Center, Milwaukee School of Engineering, Milwaukee, WI, USA and as an Adjunct Assistant Professor at the Department of M.E., Milwaukee School of Engineering, Milwaukee, WI, US, Medhat has a vast working experience in the field of Mechanical engineering and more specifically hydraulics, having developed and taught fluid power system training courses for industry professionals, being fairly familiar with the technological developments in the field of fluid power and motion control and the production program of the leading fluid power companies. In addition, he has read/written ISO-Standard functional hydraulic and pneumatic schematics diagrams, Hydraulic system design and component selection, Enforce energy saving, power management and fail-safe strategies in the design of hydraulic systems, has conducted static and dynamic hydraulic system performance analysis and Hydraulic system modeling and simulation (Matlab-Simulink /Automation Studio)

LEORON Professional Development Institute JLT is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

(3) professional organization of individuals dedicated to enhancing the quality of certifications, educational opportunities, technology evolution, and professionalism within the fluid power and motion control industry. The IFPS was started in Detroit, Michigan, in 1960 by a group of 30 professionals interested in supporting the future of the fluid power industry and the ever-changing technologies involved.Today, our membership boasts nearly 4,500. Beginning with the first Fluid Power Hydraulic Specialist Certification in 1980, the IFPS has become the recognized industry leader in fluid power and motion control certifications. Fifteen different certifications are currently offered with two certifications in development, the Fluid Power Electronic Controls Mobile/Industrial and the IFPS Mechatronics Certification. These certifications cover diverse job descriptions within the industry including mechanic, technician, specialist, and engineer. The IFPS has nearly 10,000 active certifications throughout the United States and in many countries around the world.

THE INTERNATIONAL FLUID POWER SOCIETY (IFPS) is a nonprofit 501(c)

WHO SHOULd AtteNd
This program is intended for individuals (engineers and technicians who have good mathematical background) who are in charge of design, operation and service of a hydraulic-driven machine in any of the following applications. »» Oil & Gas Industries. »» Offshore. »» Mining Equipment. »» Marines & Shipbuilding. »» Earth Drilling, Moving and Construction Machines. »» Power Plants. »» Agricultural Machines. »» Military Engineering. »» Aerospace Industries and Airport Services. »» Rail Vehicles. »» Material Handling and Lifting Equipment. »» Steelworks, Die casting and General Metal Forming. »» Plastic Molding Industries. »» Machine Tools and General Manufacturing. »» Industrial Automation. »» Wood, Paper and Glass Industries. »» Pharmaceutical & Chemical Industries. »» Food Industries.

WHY Get CeRtIFIed
»» The “Hydraulic Specialist” certification is worldwide recognized certification. »» The certificate is portable - it goes with the individual wherever their career takes them. »» Certifications help an individual to advance his career and introduce himself to the global job market. »» Certification sets an individual apart as a leader in their chosen field of work. »» Certification will help a vendor to be over-the-top quality and gets easily certified for ISO. »» Certified person helps make the work environment safe and i prove the safety, reliability and efficiency of a machine operation.
T: +971 4 447 5711 | F: +971 4 447 5710 | E: [email protected] | W: www.leoron.com
2

Certified Hydraulic Specialist | 6-10 April 2014 | Dubai, UAE

COURSE OUTLINE

COURSe OBJectIVeS
The review course is designed to prepare the participants and maximize their chance to pass a written exam to get certified as “Hydraulic Specialist”. The instructor will make 1 day overview of the hydraulic systems. The following 3 days the instructor will walk the participants through the study manual, expose them to sample tests and answer their questions. Last day (day 5) will be the exam itself.

DAY 1
AppLY HYdRAULIc CIRcUItS tO PeRFORm DeSIRed TASkS
1.1: REad hydRaulic SymbolS 1.2: REad ciRcuit diagRamS, SiZE compoNENtS, aNd REcogNiZE fuNctioNS

DAY 3
RecOmmeNd FLUId, FLUId CONdUctORS ANd FLUId FILtRAtION
5.1: SElEct thE fluid typE aNd gRadE to mEEt thE pump maNufactuRER’S SpEcificatioNS 5.2: CoNfiRm that thE fluid iS compatiblE With thE compoNENt SEalS aNd thE ENViRoNmENt 5.3: Match thE filtER SpEcificatioNS to thE REquiREmENtS of a machiNE 5.4: INtERpREt coNtamiNatioN lEVEl REpoRtS foR machiNES

ANALYZe LOAdS ANd MOtION
2.1: IdENtify SyStEm paRamEtERS (liNEaR aNd RotaRy) 2.2: DEtERmiNE thE WoRk pRofilE to moVE loadS (foRcE, diStaNcE, WoRk, 2.3: PERfoRm load calculatioNS uSiNg thE pRiNciplE of momENtS

ANALYZe ANd TROUBLeSHOOt HYdRAULIc SYStemS
6.1: INtERpREt diagNoStic REadiNgS (pRESSuRE, floW, hEat, VibRatioN, NoiSE, aNd cyclE timES). 6.2: VERify thE coRREct choicE, iNStallatioN, aNd opERatioN of compoNENtS 6.3: ISolatE hydRaulic ciRcuit aNd SyStEm malfuNctioNS.

DAY 2
SeLect COmpONeNtS FOR HYdRAULIc AppLIcAtIONS
3.1: SpEcify hydRaulic cyliNdERS 3.2: DEtERmiNE thE motoR chaRactERiSticS REquiREd to moVE a load 3.3: SiZE ValVES foR VaRiouS hydRaulic ciRcuitS 3.4: SpEcify hydRaulic RESERVoiRS to mEEt SyStEm REquiREmENtS 3.5: SpEcify hydRaulic accumulatoRS foR SyStEm opERatioN 3.6: SpEcify hydRaulic iNtENSifiERS aNd booStERS 3.7: SpEcify hEat EXchaNgERS 3.8: SiZE fluid coNductoRS

DAY 4
INteRFAce HYdRAULIc INStRUmeNtAtION ANd CONtROL SYStemS
7.1: ANalyZE thE coNtRol SEquENcE aNd machiNE opERatioN 7.2: REcogNiZE thE baSicS of ElEctRical coNtRol SyStEmS

PRepARe BILLS OF MAteRIAL ANd ScHemAtIcS
4.1: CoNVERt ciRcuit ElEmENtS iNto a WoRkiNg SchEmatic. . . 4.2: CoNStRuct StatE diagRamS iNdicatiNg thE coNtRol SEquENcE aNd machiNE opERatioN.

DAY 5
EXAM
HydRaulic SpEcialiSt EXamiNatioN

WHAt IS meANt BY “CeRtIFIed HYdRAULIc SpecIALISt”?
It is worldwide-recognized certification provided by the International fluid Power Society based on passing a 3-hours written exam. The exam will be provided and proctored by IFPS.

PROGRAm TImINGS
Registration will begin at 08.00 on Day One. The program will commence at 08.30 each day and continue until 16.30. There will be two refreshment breaks and lunch at appropriate intervals.

IN-HOUSe
If interested to run this course in-house please contact Val Jusufi at +971 4 447 5711 or e-mail: [email protected]. Our In-house courses are held in the company premises or a hotel selected by the company. We tailor the training according to your needs and requirements.

3

T: +971 4 447 5711 | F: +971 4 447 5710 | E: [email protected] | W: www.leoron.com

CHS™
SAVE
US$ 400
+971 4 447 5711 +971 4 447 5711

CERtifiEd HydRaulic SpEcialiSt 6-10 April 2014 | Dubai, UAE

BOOK EARLY

Early Bird Discounts
Register before February 15, 2014..................... US$ 3590 Register before March 15, 2014........................... US$ 3790 Final Price............................................................ US$ 3990

Group Discounts
3-4 Delegates 20% 5 Delegates 25%
*please note that all group discount are given on the final price

[email protected] www.leoron.com

4 Easy ways to Register

DeLeGAte DetAILS

1 2 3
Tel

Name : _____________________________ Tel : _____________________________

Job title Fax Job title Fax Job title Fax

: _____________________________ : _____________________________ : _____________________________ : _____________________________ : _____________________________ : _____________________________

E-mail : _____________________________ Mob : _____________________________

Name : _____________________________ Tel : _____________________________

E-mail : _____________________________ Mob : _____________________________

Name : _____________________________ Tel : _____________________________

E-mail : _____________________________ Mob : _____________________________

COmpANY DetAILS
Company : ________________________________________________ Post Code : ________________________________________________ : ________________________________________________ Address : ________________________________________________ Country : ________________________________________________ Fax : ________________________________________________

1. Please Invoice my Company   Visa  Master Card Card Number Exp Date Name on card Signature

2. Please charge my Credit Card 

VeNUe DetAILS
Oasis Beach Tower Hotel Dubai, UAE Tel: +971 4 399 4444 Fax: +971 4 399 4200 E-mail: [email protected]

: __________________________________ : _____ / _____ / ________ : __________________________________ : __________________________________

CVC/CCV Number : _______________

TERMS & CONDITIONS
1. Payment Terms 100% payment of the full amount upon receipt of the invoice. 2. Cancellation Policy i. All cancellations must be done in writing. ii. Full refund for cancellations will only be paid to a maximum of one week from the invoice date. iii. 50% refund for cancellations will only be paid to a maximum of two weeks from the invoice date. iv. No refund for cancellations done after 2 weeks from the invoice date. Substitute is always welcomed; if not possible a credit will be given which can be used for any of Leoron events up to 1 year. 3. Force Majeure: If the event is postponed, canceled or abandoned by reason of war, fire, storm, explosion, national emergency, labor dispute, strike, lock-out, civil, disturbance, actual or threatened violence by any terrorist group, or any other cause not within the control of our organization, we shall be under no liability to ‘Company’ for non-performance or delay in performance of obligations under this contract or otherwise in respect of any actions, claims, losses (including consequential losses) costs or expenses whatsoever which may be brought against or suffered or incurred by ‘Company’, as the result of the happening of any such events. 4. Complaint and Refund: For more information regarding administrative policies such as complaint and refund, please contact Val Jusufi, Head of Training at: Tel: +971 4 447 5711, Fax:+971 4 447 5710, e-mail: [email protected] 5. Governing Law: This contract shall be governed by and construed in accordance with the Laws and Regulations of DMCCA.

 I have read and agreed to the following terms and conditions

Signature: ___________________________

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close