Initial IP Configuration via Serial Cable
1) Do Not Power on the Switch
2) Read the Quick Start Guide
3) Connect a Serial Cable to Switch and Computer
4) Start a Terminal Session to the switch
a. Bits/second: 9600
b. Databits: 8
c. Parity: None
d. Stop Bits: 1
e. Flow Control: None
5) Power on the Swtich
6) When the Terminal Session stops reporting information, press Enter to display the login
prompt
7) Default Login
a. User: admin
b. Pass: password
8) First time login, press Enter to change default passwords
a. User: root
i. Type password
b. User: factory
i. Type password
c. User: admin
i. Type password
d. User: user
i. Type password