Devry BIS 311 Final Exam-2015
Content
Devry BIS 311 Final Exam-2015
IF You Want To Purchase A+ Work then Click The Link Below
For Instant Down Load
http://www.hwspeed.com/Devry-BIS-311-Final-Exam-2015-9309303321.htm?
categoryId=-1
IF You Face Any Problem Then E Mail Us At
[email protected]
Question
Devry bIS311 final
Page 1
Question 1.1. (TCO 1) In the systems development life cycle, the goal of the design activity is to _____. (Points : 5)
determine exactly what a new or modified information system should do
create a set of detailed plans or blueprints for the system
build the application
ensure that the application works as desired
Question 2.2. (TCO 2) To plan the code for a procedure, _____ uses standardized symbols to show the steps the
procedure must follow to reach its goal. (Points : 5)
pseudocode
a TOE chart
a class diagram
a flowchart
Question 3.3. (TCO 3) Computer memory locations where programmers can temporarily store and change data
while an application is running are _____. (Points : 5)
classes
literals
constants
variables
Question 4.4. (TCO 3) In Visual Basic, which of the following correctly declares a named constant with the name
strCOURSE that contains the string value "BIS311"? (Points : 5)
Const strCOURSE As String = "BIS311"
You can also visit our web site:
www.acehomework.net
String Constant strCOURSE = "BIS311"
Dim strCOURSE As "BIS311"
Const String "BIS311" As strCOURSE
Question 5.5. (TCO 5) A _____ structure is used in an application when a decision needs to be made, followed by
an action derived from that decision. (Points : 5)
selection
sequence
repetition
interrogative
Question 6.6. (TCO 5) If intQty contains 60, what will be the value of intPrice after executing the following code?
Select Case intQty
Case 1 To 50
intPrice = 10
Case 51 To 100
intPrice = 8
Case > 100
intPrice = 6
Case Else
intPrice = 0
End Select (Points : 5)
10
8
6
0
Question 7.7. (TCO 6) The loop below is classified as a(n) _____ loop.
Dim intNum As Integer = 2
Do
You can also visit our web site:
www.acehomework.net
MsgBox( intNum.ToString() )
intNum *= intNum
Loop While intNum < 1000 (Points : 5)
infinite
pretest
posttest
counter-controlled
Question 8.8. (TCO 6) Which element of the following array contains the value "Red"?
Dim strColors() As String = {"Red", "Green", "Blue", "Yellow"} (Points : 5)
strColors(4)
strColors(3)
strColors(1)
strColors(0)
Question 9.9. (TCO 7) The _____ of an independent Sub procedure usually begins with the Private keyword. (Points
: 5)
Call statement
argument list
procedure footer
procedure header
Question 10.10. (TCO 7) In the following function, what should go in the blank in the function header?
Private Function GetRatio(dblNumerator As Double, dblDenominator As Double) _____
Dim dblRatio As Double
dblRatio = dblNumerator/dblDenominator
Return dblRatio
End Function (Points : 5)
ByVal
ByRef
You can also visit our web site:
www.acehomework.net
As Integer
As Double
Question 11.11. (TCO 2) An application for a shipping company needs to keep track of the length, width, height, and
weight of packages. Using object-oriented programming methods, in this application, the weight of a package would
be represented by a(n) _____. (Points : 5)
object
attribute
method
class
Question 12.12. (TCO 4) (TCO 4) Consider the following class definition:
Public Class Box
Public Length As Double
Public Width As Double
Public Height As Double
Public Function GetVolume() As Double
Return Length * Width * Height
End Function
End Class
If crate is an instance of Box, which of the following statements assigns a value to a property? (Points : 5)
crate.Length = 42
dblVolume = crate.GetVolume()
crate.GetVolume(42)
Call crate.Length(42)
Question 13.13. (TCO 8) A programmer makes a connection between a Visual Basic application and a database
using the _____. (Points : 5)
Database Integration tool
data box control
Data Source Configuration Wizard
You can also visit our web site:
www.acehomework.net
Dataset Designer
Question 14.14. (TCO 9) The components of a two-tier architecture are _____. (Points : 5)
the primary and the secondary
the client and the server
the master and the subordinate
the alpha and the beta
Page 2
Question 1. 1. (TCOs 1, 2, and 3) You have been asked to develop an application with the following business
requirements: The user will enter an original price. When the user clicks a Calculate Sale Price button, the application
will calculate a sale price by multiplying the original price by 80%. The application will display the sale price to the
user.
(a) Develop a TOE chart for this application. You do not need to put it in table form, but list what would go in the Task
column, what would go in the Object column, and what would go in the Event column for each row of the chart. Your
chart should have at least three rows: one for input, one for processing, and one for output.
(b) Write pseudocode for the button-click event procedure in this application.
(c) Identify two variables and one constant that you would declare for this application. For each, provide a variable or
constant name that follows the syntax rules of Visual Basic and the Hungarian naming convention, and an
appropriate Visual Basic data type. (Points : 30)
Spellchecker
Question 2. 2. (TCO 5) Consider the following Visual Basic code snippet:
If intScore >= 100 Then
lblMessage.Text = "Great job!"
Else
lblMessage.Text = "Better luck next time"
End If
(a) What type of control structure is this? Be as specific as possible, and justify your answer.
(b) Describe step by step how this code will be executed and what will be displayed to the user for each of the
following values of intScore: 99, 100, and 101.
(c) Rewrite this code snippet so that it still produces the same results, but changing the condition in the first line from
intScore >= 100 to intScore < 100. (Points : 30)
Spellchecker
Question 3. 3. (TCO 6) Consider the following code snippet:
You can also visit our web site:
www.acehomework.net
Dim intTotal As Integer = 0
For intNum As Integer = 1 To 5
intTotal += intNum
Next intNum
MessageBox.Show( intTotal.ToString() )
(a) What type of control structure is this? Be as specific as possible, and explain your answer.
(b) Identify the counter variable and the accumulator variable in this loop. Explain your answer.
(c) Describe step by step how this code will be executed and what value will be displayed in a message box to the
user. (Points : 30)
Spellchecker
Devry bIS311 final
Page 1
Question 1.1. (TCO 1) In the systems development life cycle, the goal of the design activity is to _____. (Points : 5)
determine exactly what a new or modified information system should do
create a set of detailed plans or blueprints for the system
build the application
ensure that the application works as desired
Question 2.2. (TCO 2) To plan the code for a procedure, _____ uses standardized symbols to show the steps the
procedure must follow to reach its goal. (Points : 5)
pseudocode
a TOE chart
a class diagram
a flowchart
Question 3.3. (TCO 3) Computer memory locations where programmers can temporarily store and change data
while an application is running are _____. (Points : 5)
classes
literals
You can also visit our web site:
www.acehomework.net
constants
variables
Question 4.4. (TCO 3) In Visual Basic, which of the following correctly declares a named constant with the name
strCOURSE that contains the string value "BIS311"? (Points : 5)
Const strCOURSE As String = "BIS311"
String Constant strCOURSE = "BIS311"
Dim strCOURSE As "BIS311"
Const String "BIS311" As strCOURSE
Question 5.5. (TCO 5) A _____ structure is used in an application when a decision needs to be made, followed by
an action derived from that decision. (Points : 5)
selection
sequence
repetition
interrogative
Question 6.6. (TCO 5) If intQty contains 60, what will be the value of intPrice after executing the following code?
Select Case intQty
Case 1 To 50
intPrice = 10
Case 51 To 100
intPrice = 8
Case > 100
intPrice = 6
Case Else
intPrice = 0
End Select (Points : 5)
10
8
6
You can also visit our web site:
www.acehomework.net
0
Question 7.7. (TCO 6) The loop below is classified as a(n) _____ loop.
Dim intNum As Integer = 2
Do
MsgBox( intNum.ToString() )
intNum *= intNum
Loop While intNum < 1000 (Points : 5)
infinite
pretest
posttest
counter-controlled
Question 8.8. (TCO 6) Which element of the following array contains the value "Red"?
Dim strColors() As String = {"Red", "Green", "Blue", "Yellow"} (Points : 5)
strColors(4)
strColors(3)
strColors(1)
strColors(0)
Question 9.9. (TCO 7) The _____ of an independent Sub procedure usually begins with the Private keyword. (Points
: 5)
Call statement
argument list
procedure footer
procedure header
Question 10.10. (TCO 7) In the following function, what should go in the blank in the function header?
Private Function GetRatio(dblNumerator As Double, dblDenominator As Double) _____
Dim dblRatio As Double
You can also visit our web site:
www.acehomework.net
dblRatio = dblNumerator/dblDenominator
Return dblRatio
End Function (Points : 5)
ByVal
ByRef
As Integer
As Double
Question 11.11. (TCO 2) An application for a shipping company needs to keep track of the length, width, height, and
weight of packages. Using object-oriented programming methods, in this application, the weight of a package would
be represented by a(n) _____. (Points : 5)
object
attribute
method
class
Question 12.12. (TCO 4) (TCO 4) Consider the following class definition:
Public Class Box
Public Length As Double
Public Width As Double
Public Height As Double
Public Function GetVolume() As Double
Return Length * Width * Height
End Function
End Class
If crate is an instance of Box, which of the following statements assigns a value to a property? (Points : 5)
crate.Length = 42
dblVolume = crate.GetVolume()
crate.GetVolume(42)
Call crate.Length(42)
You can also visit our web site:
www.acehomework.net
Question 13.13. (TCO 8) A programmer makes a connection between a Visual Basic application and a database
using the _____. (Points : 5)
Database Integration tool
data box control
Data Source Configuration Wizard
Dataset Designer
Question 14.14. (TCO 9) The components of a two-tier architecture are _____. (Points : 5)
the primary and the secondary
the client and the server
the master and the subordinate
the alpha and the beta
Page 2
Question 1. 1. (TCOs 1, 2, and 3) You have been asked to develop an application with the following business
requirements: The user will enter an original price. When the user clicks a Calculate Sale Price button, the application
will calculate a sale price by multiplying the original price by 80%. The application will display the sale price to the
user.
(a) Develop a TOE chart for this application. You do not need to put it in table form, but list what would go in the Task
column, what would go in the Object column, and what would go in the Event column for each row of the chart. Your
chart should have at least three rows: one for input, one for processing, and one for output.
(b) Write pseudocode for the button-click event procedure in this application.
(c) Identify two variables and one constant that you would declare for this application. For each, provide a variable or
constant name that follows the syntax rules of Visual Basic and the Hungarian naming convention, and an
appropriate Visual Basic data type. (Points : 30)
Spellchecker
Question 2. 2. (TCO 5) Consider the following Visual Basic code snippet:
If intScore >= 100 Then
lblMessage.Text = "Great job!"
Else
lblMessage.Text = "Better luck next time"
You can also visit our web site:
www.acehomework.net
End If
(a) What type of control structure is this? Be as specific as possible, and justify your answer.
(b) Describe step by step how this code will be executed and what will be displayed to the user for each of the
following values of intScore: 99, 100, and 101.
(c) Rewrite this code snippet so that it still produces the same results, but changing the condition in the first line from
intScore >= 100 to intScore < 100. (Points : 30)
Spellchecker
Question 3. 3. (TCO 6) Consider the following code snippet:
Dim intTotal As Integer = 0
For intNum As Integer = 1 To 5
intTotal += intNum
Next intNum
MessageBox.Show( intTotal.ToString() )
(a) What type of control structure is this? Be as specific as possible, and explain your answer.
(b) Identify the counter variable and the accumulator variable in this loop. Explain your answer.
(c) Describe step by step how this code will be executed and what value will be displayed in a message box to the
user. (Points : 30)
Spellchecker
Question 1. 1. (TCO 7) (a) Explain the difference between passing by value and passing by reference when passing
variables to a Sub procedure or function.
(b) Describe a specific example of using a Sub procedure when you would pass a variable by value.
(c) Describe a specific example of using a Sub procedure when you would pass a variable by reference. (Points : 30)
Spellchecker
Question 2. 2. (TCOs 2 and 4) You have been asked to develop an application to keep track of employees'
scheduled vacations and ensure that all vacations are approved by the manager and that each employee does not
exceed his or her maximum annual vacation time. Maximum annual vacation time is determined by the number of
years the employee has worked for the firm. You are using object-oriented programming (OOP) to develop this
application.
You can also visit our web site:
www.acehomework.net
(a) Describe at least two classes that you could use in this application and what each class would represent in the
real world.
(b) Describe at least two properties of each class you identified in part (a) and identify the data type you would use for
each property.
(c) Describe at least one method of each class you identified in part (a), giving for each the method name and the
action performed by the method. (Points : 30)
Spellchecker
Question 3. 3. (TCOs 8, 9, and 10) (a) Explain the roles of primary and foreign keys in a relational database.
(b) In a two-tier architecture with a thin client and fat server, describe the functions performed by the client and by the
server in processing a request by a user for information from a database.
(c) In a Visual Basic application that retrieves data from a database, describe the role of a TableAdapter object.
(Points : 30)
Spellchecker
a
You can also visit our web site:
www.acehomework.net
IF You Want To Purchase A+ Work then Click The Link Below
For Instant Down Load
http://www.hwspeed.com/Devry-BIS-311-Final-Exam-2015-9309303321.htm?
categoryId=-1
IF You Face Any Problem Then E Mail Us At
[email protected]
Question
Devry bIS311 final
Page 1
Question 1.1. (TCO 1) In the systems development life cycle, the goal of the design activity is to _____. (Points : 5)
determine exactly what a new or modified information system should do
create a set of detailed plans or blueprints for the system
build the application
ensure that the application works as desired
Question 2.2. (TCO 2) To plan the code for a procedure, _____ uses standardized symbols to show the steps the
procedure must follow to reach its goal. (Points : 5)
pseudocode
a TOE chart
a class diagram
a flowchart
Question 3.3. (TCO 3) Computer memory locations where programmers can temporarily store and change data
while an application is running are _____. (Points : 5)
classes
literals
constants
variables
Question 4.4. (TCO 3) In Visual Basic, which of the following correctly declares a named constant with the name
strCOURSE that contains the string value "BIS311"? (Points : 5)
Const strCOURSE As String = "BIS311"
You can also visit our web site:
www.acehomework.net
String Constant strCOURSE = "BIS311"
Dim strCOURSE As "BIS311"
Const String "BIS311" As strCOURSE
Question 5.5. (TCO 5) A _____ structure is used in an application when a decision needs to be made, followed by
an action derived from that decision. (Points : 5)
selection
sequence
repetition
interrogative
Question 6.6. (TCO 5) If intQty contains 60, what will be the value of intPrice after executing the following code?
Select Case intQty
Case 1 To 50
intPrice = 10
Case 51 To 100
intPrice = 8
Case > 100
intPrice = 6
Case Else
intPrice = 0
End Select (Points : 5)
10
8
6
0
Question 7.7. (TCO 6) The loop below is classified as a(n) _____ loop.
Dim intNum As Integer = 2
Do
You can also visit our web site:
www.acehomework.net
MsgBox( intNum.ToString() )
intNum *= intNum
Loop While intNum < 1000 (Points : 5)
infinite
pretest
posttest
counter-controlled
Question 8.8. (TCO 6) Which element of the following array contains the value "Red"?
Dim strColors() As String = {"Red", "Green", "Blue", "Yellow"} (Points : 5)
strColors(4)
strColors(3)
strColors(1)
strColors(0)
Question 9.9. (TCO 7) The _____ of an independent Sub procedure usually begins with the Private keyword. (Points
: 5)
Call statement
argument list
procedure footer
procedure header
Question 10.10. (TCO 7) In the following function, what should go in the blank in the function header?
Private Function GetRatio(dblNumerator As Double, dblDenominator As Double) _____
Dim dblRatio As Double
dblRatio = dblNumerator/dblDenominator
Return dblRatio
End Function (Points : 5)
ByVal
ByRef
You can also visit our web site:
www.acehomework.net
As Integer
As Double
Question 11.11. (TCO 2) An application for a shipping company needs to keep track of the length, width, height, and
weight of packages. Using object-oriented programming methods, in this application, the weight of a package would
be represented by a(n) _____. (Points : 5)
object
attribute
method
class
Question 12.12. (TCO 4) (TCO 4) Consider the following class definition:
Public Class Box
Public Length As Double
Public Width As Double
Public Height As Double
Public Function GetVolume() As Double
Return Length * Width * Height
End Function
End Class
If crate is an instance of Box, which of the following statements assigns a value to a property? (Points : 5)
crate.Length = 42
dblVolume = crate.GetVolume()
crate.GetVolume(42)
Call crate.Length(42)
Question 13.13. (TCO 8) A programmer makes a connection between a Visual Basic application and a database
using the _____. (Points : 5)
Database Integration tool
data box control
Data Source Configuration Wizard
You can also visit our web site:
www.acehomework.net
Dataset Designer
Question 14.14. (TCO 9) The components of a two-tier architecture are _____. (Points : 5)
the primary and the secondary
the client and the server
the master and the subordinate
the alpha and the beta
Page 2
Question 1. 1. (TCOs 1, 2, and 3) You have been asked to develop an application with the following business
requirements: The user will enter an original price. When the user clicks a Calculate Sale Price button, the application
will calculate a sale price by multiplying the original price by 80%. The application will display the sale price to the
user.
(a) Develop a TOE chart for this application. You do not need to put it in table form, but list what would go in the Task
column, what would go in the Object column, and what would go in the Event column for each row of the chart. Your
chart should have at least three rows: one for input, one for processing, and one for output.
(b) Write pseudocode for the button-click event procedure in this application.
(c) Identify two variables and one constant that you would declare for this application. For each, provide a variable or
constant name that follows the syntax rules of Visual Basic and the Hungarian naming convention, and an
appropriate Visual Basic data type. (Points : 30)
Spellchecker
Question 2. 2. (TCO 5) Consider the following Visual Basic code snippet:
If intScore >= 100 Then
lblMessage.Text = "Great job!"
Else
lblMessage.Text = "Better luck next time"
End If
(a) What type of control structure is this? Be as specific as possible, and justify your answer.
(b) Describe step by step how this code will be executed and what will be displayed to the user for each of the
following values of intScore: 99, 100, and 101.
(c) Rewrite this code snippet so that it still produces the same results, but changing the condition in the first line from
intScore >= 100 to intScore < 100. (Points : 30)
Spellchecker
Question 3. 3. (TCO 6) Consider the following code snippet:
You can also visit our web site:
www.acehomework.net
Dim intTotal As Integer = 0
For intNum As Integer = 1 To 5
intTotal += intNum
Next intNum
MessageBox.Show( intTotal.ToString() )
(a) What type of control structure is this? Be as specific as possible, and explain your answer.
(b) Identify the counter variable and the accumulator variable in this loop. Explain your answer.
(c) Describe step by step how this code will be executed and what value will be displayed in a message box to the
user. (Points : 30)
Spellchecker
Devry bIS311 final
Page 1
Question 1.1. (TCO 1) In the systems development life cycle, the goal of the design activity is to _____. (Points : 5)
determine exactly what a new or modified information system should do
create a set of detailed plans or blueprints for the system
build the application
ensure that the application works as desired
Question 2.2. (TCO 2) To plan the code for a procedure, _____ uses standardized symbols to show the steps the
procedure must follow to reach its goal. (Points : 5)
pseudocode
a TOE chart
a class diagram
a flowchart
Question 3.3. (TCO 3) Computer memory locations where programmers can temporarily store and change data
while an application is running are _____. (Points : 5)
classes
literals
You can also visit our web site:
www.acehomework.net
constants
variables
Question 4.4. (TCO 3) In Visual Basic, which of the following correctly declares a named constant with the name
strCOURSE that contains the string value "BIS311"? (Points : 5)
Const strCOURSE As String = "BIS311"
String Constant strCOURSE = "BIS311"
Dim strCOURSE As "BIS311"
Const String "BIS311" As strCOURSE
Question 5.5. (TCO 5) A _____ structure is used in an application when a decision needs to be made, followed by
an action derived from that decision. (Points : 5)
selection
sequence
repetition
interrogative
Question 6.6. (TCO 5) If intQty contains 60, what will be the value of intPrice after executing the following code?
Select Case intQty
Case 1 To 50
intPrice = 10
Case 51 To 100
intPrice = 8
Case > 100
intPrice = 6
Case Else
intPrice = 0
End Select (Points : 5)
10
8
6
You can also visit our web site:
www.acehomework.net
0
Question 7.7. (TCO 6) The loop below is classified as a(n) _____ loop.
Dim intNum As Integer = 2
Do
MsgBox( intNum.ToString() )
intNum *= intNum
Loop While intNum < 1000 (Points : 5)
infinite
pretest
posttest
counter-controlled
Question 8.8. (TCO 6) Which element of the following array contains the value "Red"?
Dim strColors() As String = {"Red", "Green", "Blue", "Yellow"} (Points : 5)
strColors(4)
strColors(3)
strColors(1)
strColors(0)
Question 9.9. (TCO 7) The _____ of an independent Sub procedure usually begins with the Private keyword. (Points
: 5)
Call statement
argument list
procedure footer
procedure header
Question 10.10. (TCO 7) In the following function, what should go in the blank in the function header?
Private Function GetRatio(dblNumerator As Double, dblDenominator As Double) _____
Dim dblRatio As Double
You can also visit our web site:
www.acehomework.net
dblRatio = dblNumerator/dblDenominator
Return dblRatio
End Function (Points : 5)
ByVal
ByRef
As Integer
As Double
Question 11.11. (TCO 2) An application for a shipping company needs to keep track of the length, width, height, and
weight of packages. Using object-oriented programming methods, in this application, the weight of a package would
be represented by a(n) _____. (Points : 5)
object
attribute
method
class
Question 12.12. (TCO 4) (TCO 4) Consider the following class definition:
Public Class Box
Public Length As Double
Public Width As Double
Public Height As Double
Public Function GetVolume() As Double
Return Length * Width * Height
End Function
End Class
If crate is an instance of Box, which of the following statements assigns a value to a property? (Points : 5)
crate.Length = 42
dblVolume = crate.GetVolume()
crate.GetVolume(42)
Call crate.Length(42)
You can also visit our web site:
www.acehomework.net
Question 13.13. (TCO 8) A programmer makes a connection between a Visual Basic application and a database
using the _____. (Points : 5)
Database Integration tool
data box control
Data Source Configuration Wizard
Dataset Designer
Question 14.14. (TCO 9) The components of a two-tier architecture are _____. (Points : 5)
the primary and the secondary
the client and the server
the master and the subordinate
the alpha and the beta
Page 2
Question 1. 1. (TCOs 1, 2, and 3) You have been asked to develop an application with the following business
requirements: The user will enter an original price. When the user clicks a Calculate Sale Price button, the application
will calculate a sale price by multiplying the original price by 80%. The application will display the sale price to the
user.
(a) Develop a TOE chart for this application. You do not need to put it in table form, but list what would go in the Task
column, what would go in the Object column, and what would go in the Event column for each row of the chart. Your
chart should have at least three rows: one for input, one for processing, and one for output.
(b) Write pseudocode for the button-click event procedure in this application.
(c) Identify two variables and one constant that you would declare for this application. For each, provide a variable or
constant name that follows the syntax rules of Visual Basic and the Hungarian naming convention, and an
appropriate Visual Basic data type. (Points : 30)
Spellchecker
Question 2. 2. (TCO 5) Consider the following Visual Basic code snippet:
If intScore >= 100 Then
lblMessage.Text = "Great job!"
Else
lblMessage.Text = "Better luck next time"
You can also visit our web site:
www.acehomework.net
End If
(a) What type of control structure is this? Be as specific as possible, and justify your answer.
(b) Describe step by step how this code will be executed and what will be displayed to the user for each of the
following values of intScore: 99, 100, and 101.
(c) Rewrite this code snippet so that it still produces the same results, but changing the condition in the first line from
intScore >= 100 to intScore < 100. (Points : 30)
Spellchecker
Question 3. 3. (TCO 6) Consider the following code snippet:
Dim intTotal As Integer = 0
For intNum As Integer = 1 To 5
intTotal += intNum
Next intNum
MessageBox.Show( intTotal.ToString() )
(a) What type of control structure is this? Be as specific as possible, and explain your answer.
(b) Identify the counter variable and the accumulator variable in this loop. Explain your answer.
(c) Describe step by step how this code will be executed and what value will be displayed in a message box to the
user. (Points : 30)
Spellchecker
Question 1. 1. (TCO 7) (a) Explain the difference between passing by value and passing by reference when passing
variables to a Sub procedure or function.
(b) Describe a specific example of using a Sub procedure when you would pass a variable by value.
(c) Describe a specific example of using a Sub procedure when you would pass a variable by reference. (Points : 30)
Spellchecker
Question 2. 2. (TCOs 2 and 4) You have been asked to develop an application to keep track of employees'
scheduled vacations and ensure that all vacations are approved by the manager and that each employee does not
exceed his or her maximum annual vacation time. Maximum annual vacation time is determined by the number of
years the employee has worked for the firm. You are using object-oriented programming (OOP) to develop this
application.
You can also visit our web site:
www.acehomework.net
(a) Describe at least two classes that you could use in this application and what each class would represent in the
real world.
(b) Describe at least two properties of each class you identified in part (a) and identify the data type you would use for
each property.
(c) Describe at least one method of each class you identified in part (a), giving for each the method name and the
action performed by the method. (Points : 30)
Spellchecker
Question 3. 3. (TCOs 8, 9, and 10) (a) Explain the roles of primary and foreign keys in a relational database.
(b) In a two-tier architecture with a thin client and fat server, describe the functions performed by the client and by the
server in processing a request by a user for information from a database.
(c) In a Visual Basic application that retrieves data from a database, describe the role of a TableAdapter object.
(Points : 30)
Spellchecker
a
You can also visit our web site:
www.acehomework.net
