David A Auterson 2621 W. Canyon Ave. Apt 405 San Diego, CA 92123 Contact Phone: (832) 398 -4221 Email Address:
[email protected] EXPERIENCE 06/2009 to Present; 40 hours per Week; Electronics Technician III; permanent employee; not on a temporary promotion; CDI The M&T Company, Guy Newton, 1-619-545-1902; may contact supervisor. Maintain all types of Aviation Test Stations including CASS (Consolidated Automated Support System), RT(Reconfigurable Transportable)CASS, HTS, RADCOM, IATS and All Ancillary equipment including TPS'S (Test Program Sets) in the ATE CENTER Bldg 317 NAS Coronado CA. Provide daily support to the CASS (Fleet Support Team), F/A-18 FST, E-2C FST, TPS Development, MDL team and all fleet personnel Read blueprints, wiring diagrams, schematic drawings, and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components. Test electronics units, using standard test equipment, and analyze results to evaluate performance and determine need for adjustment. Perform preventative maintenance and calibration of equipment and systems. Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and tools. very skillful in using many type of calibration/measuring equipment including Power Supplies, Resistance Loads, Resolver/Synchro Standards, Modulation Analyzers, AC/DC Measurement Standards, Range Calibrators, Signal Generators, Microwave Converters, Function Generators, Micro processing Timer/Counters, Capacitor/Inductor Analyzers, Oscilloscopes, Spectrum Analyzers, Power Meters, Digital Multi Meters and More. Confer with engineers, customers and others to discuss existing or potential projects and products Performed detailed calculations to compute and establish manufacturing, construction and installation standards and specifications Performed numerous software analysis with the VAX/VMS OS Prepared specifications for purchase of materials and equipment Estimated budgets, material, construction and labor costs Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards Maintained control of project expenditures to avoid cost overruns Worked with Team Leads to assure work meets business needs, applicable codes and standards of quality Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron. Write reports and record data on testing techniques, software, laboratory equipment, and specifications to assist engineers. Identify and resolve equipment malfunctions, working with manufacturers and field representatives as necessary to procure replacement parts.
Maintain system logs and manuals to document testing and operation of equipment. Provide user applications and engineering support and recommendations for new and existing equipment with regard to installation, upgrades, modifications and enhancement. Troubleshoot and repair electronic components on a day-to-day basis by use of calibration and measurement equipment. Perform Micro Miniature repair on circuit boards down to component level by use of a soldering station. Provide Assistance to the Navy and Marine Corps on fleet wide issues.-Planned Maintenance CASS Repair Of Repairable Support (ROR) Validate Common ATE for Assets ATE Center Asset Inventory and Repair Parts Provisioning Quality Assurance Surveillance Plan Unplanned Maintenance Assist in building and testing prototypes to specifications Collect and compile operational or experimental data and assist in the preparation of estimates, schedules, budgets, specifications and reports Assisted the CASS Install team in making the USS CARL VINSON and the USS GEORGE H.W.BUSH's AIMD Operational at Newport News, Va. This included installation, Calibration and Verification of 38 CASS Stations 05/2004 to 06/2009; 55 hours per Week; Production Supervisor/Technician; last promoted Not Specified; permanent employee; not on a temporary promotion; USMC, Sean D. Byrd , 619-991-7316 ; may contact supervisor. Act as the Quality Assurance Rep (CDI) directing and managing the work of peer level and subordinate level personnel to ensure quality production and support of the aircraft. Responsible for the day-to-day trouble shooting and repair of F18 Radar components including circuit cards, wiring, and calibration. Assemble and repair cables and support equipment. Utilize CASS, HTS, IATS and technical publication libraries to aid in tracking wire paths and trouble shooting down to component level. Tested avionics equipment using voltmeters, oscilloscopes and circuit testers to diagnose faulty circuits Removed and installed circuit modules, cards, printed circuit boards, multilayer boards, instruments and cables in accordance with their perspective service manuals or technical publications Performed preventative maintenance tasks; cleaning, repairing and checking equipment to prevent problems and unnecessary cost Coordinated production and delegated tasks on a daily basis Performed numerous calibrations and modifications of electronic equipment Used electronic schematics, blue prints, block diagrams, wiring diagrams, test diagrams and other technical data to repair faulty components Conducted training for junior technicians to help improve their skills, resulting in an improvement of maintenance processes Inspected equipment daily for correct installation/repair to ensure a quality product learned characteristics and repair techniques for new electronic devices as they are procured and upgraded Able to communicate technical information related to electronic repair and maintenance established and maintained effective working relationships with a diverse organization
Maintained and repaired all types of CASS including Block I, Block II, Block III, RF, CNI, RT and High Power Repaired numerous Radar Transmitters, Antennas, Radar Target Data Processors, Power Supplies, Computer Power Supplies, MIDS Terminals, CIT's, Receiver Exciters, Radar Receivers, all part of APG-65/73 and APX 111 EDUCATION Burlington-Edison, Burlington, WA; 2004 High School Diploma Advanced Training, El Cajon, CA; Information Systems Technology , 2006 Advanced Training, El Cajon, CA; Electronics Repair , 2006 PROFESSIONAL TRAINING RT CASS School, USMC, 2008 CASS School: Consolidated Automated Support system Operator/ Maintainer USMC/ 2005 Electronics School: Certified Electronics Technician- (Electronics Certification)- Advanced Training/ 2005 Leading Marines (Non-Resident) Completion 2007-Present Navy Knowledge Online Six-Sigma Certification (Green Belt in process) 2005-2006 Advanced Training Associates Fiber Optics Certification Certified FOA (Fiber Optics Technician) - Completion of Fiber Optic Installation Technology Training FCC License Certificate of Completion of Electronics in Telecommunications Technology (Radar Endorsement for FCC- Federal Communications Commission) 2004-Present Marine Corps Institute Courses completed: Aviation maintenance work center supervisor Leadership Leading marines Antenna Propagation Counseling for Marines Diploma Burlington- Edison High School - Burlington, WA PROFESSIONAL LICENSES/CERTIFICATES Certified Electronics Technician. (ETA International) Certified Fiber Optics Tech. (Fiber Optics Association) PROFESSIONAL RATINGS, AWARDS, AND RECOGNITIONS Achievement Medal Awarded - Performed more than 720 man hours repairing 15 radar antennas which were not normally repaired during I level; Resulting in savings of more than $750, 000 in support of Operation Iraqi Freedom Achievement Medal Awarded - Assisted in the repair of an operational test set which increased readiness for an item that was non-operational for more than six months National Defense Service Medal Global War on Terrorism Service Medal Marine Corps Good Conduct Medal
Sea Service Deployment Ribbon (2) IRAQ Campaign Medal Navy and Marine Corps Achievement Medal (Awarded during IRAQ tour) Letter of Appreciation - Toys for Tots (3yrs in a row) OTHER INFORMATION Current Secret Security Clearance Self-motivated, confident in making significant decisions, and able to meet deadlines in a timely manner Skillful with computer software such as Windows, NT, XP, Vista, Excel, PowerPoint, Word, adobe and many more Proficient in the VAX/VMS operating system Received Letters of recommendation and certificates for outstanding performance Performed numerous computations without the aid of automated equipment Very skillful in building and or repairing cables Proficient in Soldering different types of equipment and circuit cards Identify complex problems and reviewing related information to develop and evaluate options and implement solutions Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic principles Analyzing information and evaluating results to choose the best solution and solve problems Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form U.S. MILITARY SERVICE INFORMATION Active Duty: 07/2004 to 07/2009 - U.S. Marine Corps Campaign badges and/or expeditionary medals received: IRAQ tour: Operation IRAQI Freedom 2006-2007 Japan tour 2007-2008 Additional Data Sheet: Honorable Discharge 1. Appointment Eligibility: Veterans Employment Opportunity Act Eligible 2. US Citizenship: Yes 4. Willing to Travel: Yes 5. Vet Preference: 5-Point Preference 6. Qualified Typist: Yes 7. SEX: Male References available upon request; Letters or Recommendation available upon request;