Mtc of different M.I Scheme under salema Block during the year 2010-11 / S.H:-Reparing of pump motor, suction delivery , electrical equipment etc, Gr NoDescribtion of Iten Labour charge for dismentling of motor of capacity 15/20/25 H.P three phase 440 volt and vernishing, heating,greasing of bearing and reffiting the same making proper alignment as per direction of the engineer in charge. Labour charge for overhauling 15/20/25 H.P horizontal split case centifugal pump dismentling proper washing and refiting fixing the same eith neccesary gland packing changing of lick etc in/c final run complete as per direction of the engineer in charge. Neccesary nuts bolt washer,gland,packing gusket,grease etc will have to arrange by the agency for which no extra payment will be made. Instalation of 15/20/25 H.P pump and mptor sets after making C.C foundation base (1.5mx0.45mx0.45m) in proportion of 1:2:4 ( 1Cement:2 River Sand: 4 Jhama brick aggregate 20 mm nominal size with supplying a foundation bolt 600 mm lead in/c nuts, washer etc coplete as per direction of the Engineer in charge. Supplying and fitting fixing C.I coupling as required for pump of approved quality as per direction of the Engineer in charge. Supplying and fitting fixing C.I coupling nuts bolt (full threatred) of approved quality Providing and fitting fixing of coupling rubber bush of approved quality as per direction of the Engineer in charge supplying and fitting fixing of C.I gland for pump of approved quality as per direction of the Engineer in charge. Supplying and fitting fixing of stack nuts for pump of approved quality. Providing and fitting fixing of Jum/guard bush (brass) of approved quality Quantity 30 Unit Nos Rate /unit 600.00 Amount 18000.00
Item No-10 Providing and fitting fixing of Jum nuts(M.S) of approved quality Item No-11 Providing and fitting fixing of Causing ring of approved quality Item No-12 Providing and fitting fixing of lentern ring of approved quality Item No-13 Providing and fitting fixing of bearing of approved quality as per direction of the Engineer in charge.
a)6305/6306 b) 6507/6308/6309 Item No-14 Providing and fitting fixing pump impeller for various pump of approved quality as per direction of the Engineer in charge. Item No-15 Providing and fitting fixing of pump colling pipes in nuts,bolts etc.of approved quality as per direction of the Engineer in charge. Item No-16 Providing and fitting fixing of air colling fan etc.of approved quality Item No-17 Providing and fitting fixing of pump shaft of different size of approved quality Item No-18 Providing and fitting fixing of sleave bush of approved quality Item No-19 Providing and fitting fixing of stuffing box of approved quality
Item No-20 Providing and fitting fixing of 7/16 mm dia shethed copper wire. Item No-21 Labour charge for dismentling G.I line and replacing the same after proper washing, cleaning including cutting threading welding carriage of pipes are to be done by the agency for which no extra payment will be made. a)150 mm dia b) 125mm dia Item No-22 laying of G.I pipe of different dia complete with fitting fixing as per direction of the engineer in charge. Item No-23 providing and laying of G.I pipe of different dia complete with fitting fixing as per direction of the engineer in charge. a) 40mm dia b)25mm dia Item No-24 providing and fitting fixing of 25/40mm dia nipple of approved quality a) 40mm dia b)25mm dia Item No-25 providing and fitting fixing of 25/40mm dia bend of approved quality a) 40mm dia b)25mm dia Item No-26 providing and fitting fixing of 25/40mm dia G.I tees of approved quality a) 40mm dia b)25mm dia Item No-27 providing and fitting fixing of 25/40mm dia G.I union joint of approved quality a) 40mm dia b)25mm dia Item No-28 providing and fitting fixing of different dia brass full way valve of approved quality a) 40mm dia b)25mm dia Item No-29 providing and fitting fixing of G.I/M.S flange of approved quality a) 150mm dia b)125mm dia Item No-30 providing and fitting fixing of flange washer 150/125 dia of approved quality a) 150/125mm dia Item No-31 providing and fitting fixing of G.I bend of approved quality a) 150mm dia b)125mm dia Item No-32 providing and fitting fixing of C.I foot valve 150mm dia of approved quality Item No-33 Providing and fitting fixing of C.I tail piece 150mm dia of approved quality as per direction of the Engineer in charge. Item No-34 Lavour charge for repairing of 150mm dia foot valve by welding into net including supplyies and fittng fixing of C.I plate C.I weight ,M.S nuts and bolts and refitting the foot valve after making good as per direction of the Engineer in charge. Item No-35 providing and fitting fixing of foot valve washer of approved quality
300
Meter
62.00
18600.00
120 120 10
Meter Meter Meter
23.35 13.55 12.30
2802.00 1626.00 123.00
25 15
Meter Meter
187.80 130.60
4695.00 1959.00
10 5 6 3
Nos Nos Nos Nos
25.00 15.00 47.40 27.20
250.00 75.00 284.40 81.60
10 5
Nos Nos Nos
61.30 43.80 55.00
613.00 219.00 550.00
10 5
Nos
40.00
200.00
20 5 30 20 100
Nos Nos Nos Nos Nos
615.00 329.00 115.00 95.00 10.00
12300.00 1645.00 3450.00 1900.00 1000.00
6 6 5 15 6
Nos Nos Nos Nos Nos
271.30 236.85 450.00 150.00 150.00
1627.80 1421.10 2250.00 2250.00 900.00
60
Nos
100.00
6000.00
Item No-36 providing and fitting fixing of hose clamp 150mm dia of approved quality Item No-37 providing and fitting fixing of C.I sluice valve 125 mm dia of approved quality Item No-38 Reparing of 125mm dia sluice valve by dismentling in/c changing of sluice valve spindle,key ,gasket ,nuts and bolts etc. and refitting fixing the same after making good in the exisitng delivery line as per direction of the Engineer in charge. Item No-39 Labout charge for dismentling of 125mm dia non-return valve and refitting fixing the same after proper washing and ressemling the C.I seperator plate etc as per direction of the engineer in charge. Item No-40 Labou charge for liftting of hose pipe from river bed by dismentling of G.I suction line and reffiting the same after cleaning the pipe with neccesary fitting etc. coplete as per direction of the Engineer in charge. Item No-41 providing and fitting fixing of 40/25 mm dia G.I socket of approved quality a) 40mm dia b)25mm dia Item No-42 providing and fitting fixing of 3/22mm dia shealted copper wire of approved quality Item No-43 providing and fitting fixing of volt meter(0-500) of approved quality Item No-44 providing and fitting fixing of volt meter selector switch of approved quality Item No-45 providing and fitting fixing of ampere meter(0-150)of approved quality Item No-46 providing and fitting fixing of indicator lamp for 3 ( three) phase line in panel board of approved quality Item No-47 providing and fitting fixing of 63-A Sub main switch of of approved quality Item No-48 providing and fitting fixing of 63-star delta ( oil immerged) suitable for motor of of approved quality. Item No-49 providing and fitting fixing of 200-A main switch Havels made of oapproved quality Item No-50 providing and fitting fixing of busber copper strip of size 12mm thickness wide and 0.60 mtr long I one box of M.S sheet including proper connection and wiring etc. Item No-51 Reparing of 15/20/25 H.P starter by dismentling including changing of megnetic coil , connecting finger , oil finger rod etc. complete and refitting, fixing the same as per direction of the Engineer in charge. Item No-52 Provoding and fittinf fixing of 6/8/10 KVAR capacitor of approved quality as per direction of the Engineer in charge. Item No-53 Provoding and fittinf fixing of single phage preventor of approved quality as per direction of the Engineer in charge. Item No-54 Repairing charge of busber including changing of copper strip with neccesary screws,nuts, washer including proper reconnection and wiring etc. complete as per direction of the Aengineer in charge.
Item No-55 Labour charge for dismentling of 200-A main switch and refiting fixing the same after repairing i.e changing of H.R.C fuse , cutout ,connecting rod ,backlite plate ,finger ,insulated iron , handle i.e as require and making good as per direction of the Engineer in charge. Item No-56 Labour charge for dismentling of 63-A sub main awitch and refiting fixing the same after repairing i.e changing ofconnecting rod ,bac klite plate ,finger ,insulated iron handle i.e as require and making good as per direction of the Engineer in charge. Item No-57 Provoding and fittinf fixing of nuts and bolts of approved quality as per direction of the Engineer in charge. Item No-58 Dismentling of existing disorder motor/pump and replacing it by a new one including fitting fixing and trial run complete as per direction of the Engineer in charge ( Rate inclusive of carriage charge of the pump/motor). Item No-59 labour charge for welding including the cost of welding matterials as directed. Item No-60 Labour charge for taking out existing pump and mptor including M.S bolts from the base and keeping the same under contractor safe custody and demolising and disposal of the rubbish from the pump house within a lead of 50.00mtr as per directionof the Engineer in charge. Item No-61 providing and fitting fixing gland nut of approved quality Item No-62 Supplying of wheel bearing grease of approved quality. Item No-63 pplying of Asbestos rope of approved quality Item No-64 Internal electrification of pump house with suitable PVC sheathed copper weir including providing 2 nos light points inside the pump house, 3 nos light points outside the pump house and one plug point earthing with 8 BWG G.I. wire etc. and including supporting all electrical equipments in/c 1 nos 16 Amps main switch complete as per direction of the Engineer in Charge.
5
Nos
1000.00
5000.00
10
Nos
400.00
4000.00
40 5
kg Nos
40.00 350.00
1600.00 1750.00
800 4
Meter Nos
0.50 500.00
400.00 2000.00
50 15 15 2
kg kg kg Nos
40.00 90.00 70.00 1050.00
2000.00 1350.00 1050.00 2100.00
Total= Say
361120.70 361121.00
Item 1 Item No-1
Describtion Quantity Unit of Iten 2 3 4 Labour 30 Nos charge for dismentling of motor of capacity 15/20/25 H.P three phase 440 volt and vernishing, heating,gre asing of bearing and reffiting the same making proper alignment as per direction of the engineer in charge.
Rate 5 Rs600.00/Eac h
Amout 6 600
Item No-2
Labour charge for overhauling 15/20/25 H.P horizontal split case centifugal pump dismentling proper washing and refiting fixing the same eith neccesary gland packing changing of lick etc in/c final run complete as per direction of the engineer in charge. Neccesary nuts bolt washer,gla nd,packing
30
Rs600.00/Eac h
600
Item No-3
Item No-4
Instalation ofe 15/20/25 H.P pump and mptor sets after making C.C foundation base (1.5mx0.45 mx0.45m) in proportion of 1:2:4 ( ! Cement:2 River Sand: 4 Jhama brick aggregate 20 mm nominal size with supplying a foundation bolt 600 mm lead in/c nuts, washer etc coplete as per direction of Supplying and fitting fixing C.I coupling as required for pump of approved quality as per direction of the Engineer in charge.
5
Rs2000.00/Ea ch
2000
25
Rs950/Each
950
Item No-5
Item No-6
Item No-7
Supplying and fitting fixing C.I coupling nuts bolt (full threatred) of approved quality Providing and fitting fixing of coupling rubber bush of approved quality as per direction of the Engineer in charge supplying and fitting fixing of C.I gland for pump of approved quality as per direction of the Engineer in charge.
200
Rs27.00/Each
27
150
Rs90.00/Each
90
50
Rs85.00/Each
85
Item No-8
Item No-9
Supplying and fitting fixing of stack nuts for pump of approved quality. Providing and fitting fixing of Jum/guard bush (brass) of approved quality
150
Rs20.00/Each
20
20
Rs150.00/Eac h
150
Item No-10 Providing and fitting fixing of Jum nuts(M.S) of approved quality Item No-11 Providing and fitting fixing of Causing ring of approved quality Item No-12 Providing and fitting fixing of lentern ring of approved quality Item No-13 Providing and fitting fixing of bearing of approved quality as per direction of the Engineer in charge. a)6305/630 6 b) 6507/6308/ 6309 Item No-14 Providing and fitting fixing pump impeller for various pump of approved quality as per direction of the Engineer in charge.
50
Rs50.00/Each
50
20
Rs250.00/Eac h
250
5
Rs85.00/Each
85
15
Rs450.00/Eac h Rs650.00/Eac h
450
15 4
Rs1250.00/Ea ch
650 1250
Item No-15 Providing and fitting fixing of pump colling pipes in nuts,bolts etc.of approved quality as per direction of the Engineer in Item No-16 charge. Providing and fitting fixing of air colling fan etc.of approved quality Item No-17 Providing and fitting fixing of pump shaft of different size of approved quality Item No-18 Providing and fitting fixing of sleave bush of approved quality Item No-19 Providing and fitting fixing of stuffing box of approved quality Item No-20 Providing and fitting fixing of 7/16 mm dia shethed copper wire.
5
Rs30.00/Each
30
10
Rs250.00/Eac h
250
5
Rs1200.00/Ea ch
1200
10
RS275.00/Eac h
275
4
Rs90.00/Each
90
400
Rs62.00/Each
62
Item No-21 Labour charge for dismentling G.I line and replacing the same after proper washing, cleaning including cutting threading welding carriage of pipes are to be done by the agency for which no extra payment will be made. a)150 mm dia b) 125mm dia
150
Rs26.65/Mete r Rs23.35/Mete r
26.65
150
23.35
Item No-22 dismenatlin g and reffiting fixing of 25/40 mm dia G.I pipe for priming arrangeme nt in/c making good the same where required in running condition ( cleaning, threading, cutting etc. should be done where nessecary ) as per direction of the engineer in charge. a)40mm dia b)25mm providing and laying of G.I pipe of different dia complete with fitting fixing as per direction of the engineer in charge.
20
Rs13.55/Mete r Rs12.30/Mete r
13.55
10
12.3
Item No-23 providing and laying of G.I pipe of different dia complete with fitting fixing as per direction of the engineer in charge. a) 40mm dia b)25mm dia
25
Rs187.80/Me ter Rs130.60/Me ter
187.8
Item No-24 providing and fitting fixing of 25/40mm dia nipple of approved quality a) 40mm dia b)25mm dia Item No-25 providing and fitting fixing of 25/40mm dia bend of approved quality a) 40mm dia b)25mm dia
15 10
Rs25.00/Each Rs15.00/Each
130.6 25
5 6
Rs47.40/Each Rs27.2/Each
15 47.4
3
27.2
Item No-26 providing and fitting fixing of 25/40mm dia G.I tees of approved quality a) 40mm dia b)25mm dia Item No-27 providing and fitting fixing of 25/40mm dia G.I union joint of approved quality a) 40mm dia b)25mm dia Item No-28 providing and fitting fixing of different dia brass full way valve of approved quality a) 40mm dia b)25mm dia Item No-29 providing and fitting fixing of G.I/M.S flange of approved quality a) 150mm dia b)125mm dia
10
Rs61.300/Eac h Rs43.8/Each
61.3
5 10
Rs55.00/Each Rs40.00/Each
43.8 55
5 10
Rs615.00/Eac h Rs329.00/Eac h
40 615
5 30
Rs115.00/Eac h Rs95.00/Each
329 115
20
Item No-30 providing and fitting fixing of flange washer 150/125 dia of approved quality a) 150/125m Item No-31 m dia providing and fitting fixing of G.I bend of approved quality a) 150mm dia b)125mm dia Item No-32 providing and fitting fixing of C.I foot valve 150mm dia of approved quality Item No-33 Providing and fitting fixing of C.I tail piece 150mm dia of approved quality as per direction of the Engineer in charge.
100
Rs10.00/Each
10
6
Rs271.30.00/ Each Rs236.85.00/ Each
271.3
6 5
Rs450.00/Eac h
236.85 450
15
Rs150.00/Eac h
150
Item No-34 Lavour charge for repairing of 150mm dia foot valve by welding into net including supplyies and fittng fixing of C.I plate C.I weight ,M.S nuts and bolts and refitting the foot valve after making good as per direction of the Engineer in charge.
6
Rs150.00/Eac h
150
Item No-35 providing and fitting fixing of foot valve washer of approved quality Item No-36 providing and fitting fixing of hose clamp 150mm dia of approved quality Item No-37 providing and fitting fixing of C.I sluice valve 125 mm dia of approved quality
60
Rs100.00/Eac h
100
50
Rs30.00/Each
30
4
Rs1523.20/Ea ch
1523.2
Item No-38 Reparing of 125mm dia sluice valve by dismentling in/c changing of sluice valve spindle,key ,gasket ,nuts and bolts etc. and refitting fixing the same after making good in the exisitng delivery line as per direction of the Engineer in charge.
5
Rs200.00/Eac h
200
Item No-39 Labout charge for dismentling of 125mm dia nonreturn valve and refitting fixing the same after proper washing and ressemling the C.I seperator plate etc as per direction of the engineer in charge.
4
Rs200.00/Eac h
200
Item No-40 Labou charge for liftting of hose pipe from river bed by dismentling of G.I suction line and reffiting the same after cleaning the pipe with neccesary fitting etc. coplete as per direction of the Engineer in charge. Item No-41 providing and fitting fixing of 40/25 mm dia G.I socket of approved quality a) 40mm dia b)25mm dia Item No-42 providing and fitting fixing of 3/22mm dia shealted copper wire of approved quality Item No-43 providing and fitting fixing of volt meter(0500) of approved quality
60
Rs30.00/Mete r
30
4
Rs25.00/Each Rs15.00/Each
25
4 50
Rs10.00/Mete r
15 10
20
Rs175.00/Me ter
175
Item No-44 providing and fitting fixing of volt meter selector switch of approved quality Item No-45 providing and fitting fixing of ampere meter(0150)of approved quality Item No-46 providing and fitting fixing of indicator lamp for 3 ( three) phase line in panel board of approved Item No-47 quality providing and fitting fixing of 63A Sub main switch of of approved quality Item No-48 providing and fitting fixing of 63star delta ( oil immerged) suitable for motor of of approved quality
10
10
Rs175.00/Me ter
175
10
Rs10.00/Mete r
10
10
Rs2284.00/M eter
2284
10
Rs3650.00/M eter
3650
Item No-49 providing and fitting fixing of 200-A main switch Havels made of oapproved quality Item No-50 providing and fitting fixing of busber copper strip of size 12mm thickness wide and 0.60 mtr long I one box of M.S sheet including proper connection and wiring etc. Item No-51 Reparing of 15/20/25 H.P starter by dismentling including changing of megnetic coil , connecting finger , oil finger rod etc. complete and refitting, fixing the same as per direction of the Engineer in charge.
5
Rs4685.00/M eter
4685
2
Rs1348.00/Ea ch
1348
10
Rs1000.00/Ea ch
1000
Item No-52 Provoding and fittinf fixing of 6/8/10 KVAR capacitor of approved quality as per direction of the Engineer in charge. Item No-53 Provoding and fittinf fixing of single phage preventor of approved quality as per direction of the Engineer in Item No-54 charge. Repairing charge of busber including changing of copper strip with neccesary screws,nuts , washer including proper reconnecti on and wiring etc. complete as per direction of the Aengineer
4
Rs1900.00/Ea ch
1900
5
Rs1250.00/Ea ch
1250
10
Rs100.00/Eac h
100
Item No-55 Labour charge for dismentling of 200-A main switch and refiting fixing the same after repairing i.e changing of H.R.C fuse , cutout ,connecting rod ,backlite plate ,finger ,insulated iron , handle i.e as require and making good as per direction of the Engineer in charge.
4
Rs1000.00/Ea ch
1000
Item No-56 Labour charge for dismentling of 63-A sub main awitch and refiting fixing the same after repairing i.e changing ofconnecti ng rod ,bac klite plate ,finger ,insulated iron handle i.e as require and making good as per direction of the Engineer in charge.
10
Rs400.00/Eac h
400
Item No-57 Provoding and fittinf fixing of nuts and bolts of approved quality as per direction of the Engineer in charge.
40
Rs40.00/Kg
40
Item No-58 Dismentling of existing disorder motor/pum p and replacing it by a new one including fitting fixing and trial run complete as per direction of the Engineer in charge ( Rate inclusive of carriage charge of the pump/mot or). Item No-59 labour charge for welding including the cost of welding matterials as directed.
5
Rs350.00/Eac h
350
800
Rs0.50/Meter
0.5
Item No-60 Labour charge for taking out existing pump and mptor including M.S bolts from the base and keeping the same under contractor safe custody and demolising and disposal of the rubbish from the pump house within a lead of 50.00mtr as per directionof the Engineer in Item No-61 charge. providing and fitting fixing gland nut of approved quality Item No-62 Supplying of wheel bearing grease of approved quality. Item No-63 pplying of Asbestos rope of approved quality
4
Rs500.00/Eac h
500
50
Rs 40.00/kg
40
15
Rs 90.00/kg
90
15
Rs 70.00/kg
70
Item No-64 Internal electrificati on of pump house with suitable PVC sheathed copper weir including providing 2 nos light points inside the pump house, 3 nos light points outside the pump house and one plug point earthing with 8 BWG G.I. wire etc. and including supporting all electrical