FS21 - Water Based Intumescent Steel Coating - Steel Fire Protection | Fireproofing Steel | Fire Stopping | Fire Protection Products | Fire Coating
Steel Fire Protection and Solvent-Based Intumescent Coatings for Interior and Exterior Structural Steel. Fire Security Systems providing cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Fireproofing Spray, Fireproofing, Fire Stopping, Cable Coating and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE
Content
Certificate number: FS453/02
FS21 Firestop Panel
Application FS21 Firestop Panel is used to firestop mechanical and electrical services where they pass through fire rated walls. Tested in accordance with BS476:Parts 20 & 22, FS21 Firestop Panel provides up to 4 hours fire protection. • FS21 Firestop Panel (1200mm x 600mm x 50mm) • FS23 Acoustic Intumescent Sealant General benefits:
• Cold smoke and air tight seal • Good acoustic insulation (up to Rw of 52dB) • No coat back required • Simple installation • Light weight • Suitable to make good around most types of service penetrations • Unaffected by humidity • Maintenance free • Low smoke emission
Description FS21 Firestop Panel comprises of three Fire Security System’s elements:
FIRE RATINGS
SERVICE PENETRATIONS
Tested to BS 476:Parts 20 & 22 0 1hr 4hr • FS11 Ablative Coating Fire Rating FS21 Firestop Panel are manufactured by spraying highdensity rock fibreboard with a fire rated ablative coating. The coated panels are simply cut and friction fitted between the services and the edges of the structure. Plastic pipework needs to be sealed with FS21 High Expansion Intumescent Sealant or sleeved with Insulated Fire Sleeves prior to installation of the coated panel system. • Material Safety Data Sheets • Installation Instructions • Product Certification The FS23 Intumescent Sealant is used as an adhesive on the edges of the panel to form a barrier with surrounding You can request from our technical sales office the following information:
TECHNICAL INFORMATION
Fire Rating
Construction Tested
Block Wall Plasterboard Partition Plasterboard Partition (Patrice)
Panel Configuration 1 x 50mm 2 x 50mm
structure. All joints in the barrier are pointed in with FS23
Integrity 4 Hours 1 Hour Insulation 1 Hour 19 mins
Intumescent Sealant to form a monolithic layer. The FS15 Ablative Coating is largely used to make good any damaged coating or for a more aesthetic finish. In plasterboard partitions, the panel must be fitted to both sides of the wall to fire protect the studs. The panels can be fitted by either a pattress fix or by being cut into openings. For large floor openings we would advise using FS20 Firestop Mortar (see technical data sheet).
2 x 50mm
2 Hour
15 mins
Acoustic Weighted Sound Reduction Index (Rw) of up to 52dB. Contact our sales office with details of:
• Wall construction • Acoustic rating required
Fibre Migration FS21 Firestop Panel will not allow fibre migration as all exposed edges of mineral fibre are encapsulated with an acrylic based polymer.
• Size of opening Colour Cold Smoke and Air Tight Seal FS21 Firestop Panel will provide a cold smoke seal around services penetrating through compartment walls. White matt finish. Can be over painted if desired.
Specification Install FS21 Firestop Panel to provide up to 4 hours fire rating to all service penetrations passing through all fire rated walls. Installation to be fully inn accordance with manufacturer’s instructions.
FS21 Firestop Panel
FS21 Firestop Panel firestopping service penetrations in plasterboard partition (no coat back required).
FS21 Firestop Panel fitted around service penetrations in bulkhead above fire door (no coat back required).
ORDERING
When ordering this product you will need the following information: • Fire rating • Details of service penetrations • Quantity required
FS21 Firestop Panel installed as a pattress surface mounted to outside of plasterboard partition fitted around plastic pipes with Fire Security Systems FS23 Expansion Intumescent Sealant (no coat back required).
Please order from our technical sales office.
Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada P: +1 604 941 1001 F: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway P: +47 95 47 80 00 F: +47 38 02 15 31 UAE: PO Box 40068 Ajman UAE P: +971 6 7478842 F: +971 6 7478843 Email: [email protected] www.fire-security.net
SERVICE PENETRATIONS
FS21 Firestop Panel
Application FS21 Firestop Panel is used to firestop mechanical and electrical services where they pass through fire rated walls. Tested in accordance with BS476:Parts 20 & 22, FS21 Firestop Panel provides up to 4 hours fire protection. • FS21 Firestop Panel (1200mm x 600mm x 50mm) • FS23 Acoustic Intumescent Sealant General benefits:
• Cold smoke and air tight seal • Good acoustic insulation (up to Rw of 52dB) • No coat back required • Simple installation • Light weight • Suitable to make good around most types of service penetrations • Unaffected by humidity • Maintenance free • Low smoke emission
Description FS21 Firestop Panel comprises of three Fire Security System’s elements:
FIRE RATINGS
SERVICE PENETRATIONS
Tested to BS 476:Parts 20 & 22 0 1hr 4hr • FS11 Ablative Coating Fire Rating FS21 Firestop Panel are manufactured by spraying highdensity rock fibreboard with a fire rated ablative coating. The coated panels are simply cut and friction fitted between the services and the edges of the structure. Plastic pipework needs to be sealed with FS21 High Expansion Intumescent Sealant or sleeved with Insulated Fire Sleeves prior to installation of the coated panel system. • Material Safety Data Sheets • Installation Instructions • Product Certification The FS23 Intumescent Sealant is used as an adhesive on the edges of the panel to form a barrier with surrounding You can request from our technical sales office the following information:
TECHNICAL INFORMATION
Fire Rating
Construction Tested
Block Wall Plasterboard Partition Plasterboard Partition (Patrice)
Panel Configuration 1 x 50mm 2 x 50mm
structure. All joints in the barrier are pointed in with FS23
Integrity 4 Hours 1 Hour Insulation 1 Hour 19 mins
Intumescent Sealant to form a monolithic layer. The FS15 Ablative Coating is largely used to make good any damaged coating or for a more aesthetic finish. In plasterboard partitions, the panel must be fitted to both sides of the wall to fire protect the studs. The panels can be fitted by either a pattress fix or by being cut into openings. For large floor openings we would advise using FS20 Firestop Mortar (see technical data sheet).
2 x 50mm
2 Hour
15 mins
Acoustic Weighted Sound Reduction Index (Rw) of up to 52dB. Contact our sales office with details of:
• Wall construction • Acoustic rating required
Fibre Migration FS21 Firestop Panel will not allow fibre migration as all exposed edges of mineral fibre are encapsulated with an acrylic based polymer.
• Size of opening Colour Cold Smoke and Air Tight Seal FS21 Firestop Panel will provide a cold smoke seal around services penetrating through compartment walls. White matt finish. Can be over painted if desired.
Specification Install FS21 Firestop Panel to provide up to 4 hours fire rating to all service penetrations passing through all fire rated walls. Installation to be fully inn accordance with manufacturer’s instructions.
FS21 Firestop Panel
FS21 Firestop Panel firestopping service penetrations in plasterboard partition (no coat back required).
FS21 Firestop Panel fitted around service penetrations in bulkhead above fire door (no coat back required).
ORDERING
When ordering this product you will need the following information: • Fire rating • Details of service penetrations • Quantity required
FS21 Firestop Panel installed as a pattress surface mounted to outside of plasterboard partition fitted around plastic pipes with Fire Security Systems FS23 Expansion Intumescent Sealant (no coat back required).
Please order from our technical sales office.
Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada P: +1 604 941 1001 F: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway P: +47 95 47 80 00 F: +47 38 02 15 31 UAE: PO Box 40068 Ajman UAE P: +971 6 7478842 F: +971 6 7478843 Email: [email protected] www.fire-security.net
SERVICE PENETRATIONS
