how to use tv

HOW TO USE THE TV
1. Make sure you are using one of CTEMOB1/2/3 from
EV1-241A
2. Turn on TV using remote (remote is attached to the
TV with velcro)
3. Plug in laptop via HDMI or VGA; if VGA, plug in audio
cable as well
4. When plugging in audio cable for VGA, laptop will
prompt you with a window with “Speaker Out”
highlighted; just press “OK”
5. Laptop will automatically cycle inputs; no need to
select
6. Press the Windows button and “P” at the same time
to bring up the projection settings and set laptop to
“Duplicate Displays” for correct resolution on TV
7. Laptop should automatically receive audio through
the HDMI connection and use it; if not, see step 8.
8. Right click the speaker icon on the toolbar in the
bottom right on the laptop, left click playback
devices, select PN-Y55 as the audio device, and press
the “Set Default” button in the bottom right of the
audio devices window
9. You are ready to go!
10.
Leave the room in the same condition you found
it.

Prepared By: Ilia Zenkov
Date: April 18, 2016