line follower synopsis Synopsis

“Line follower Robot using microcontroller”
Synopsis
submitted
in partial fulfillment
for the award of the Degree of
Bachelor of Technology
in Department of Electronics & Communication



Supervisor Name: Submitted By:
Sahil (1511249)
Mannu(1511171)


N.C. College of Engineering, Israna
Department of Electronics & Communication
N.C. College of Engineering, Israna
Kurukshetra University, Kurukshetra



TABLE OF CONTENTS


1. INTRODUCTION

2. CIRCUIT DIAGRAM

3. CIRCUIT DISCRIPTION OF LINE FOLLOWER ROBOT

4. LIST OF COMPONENTS

5. APPLICATIONS OF PROJECT

6. CONCLUSION

7. LIST OF REFERENCES/ DATASHEET































CERTIFICATE

This is certify that the project entitled “line follower robot using
microcontroller” submitted by Sahil and Mannu to N.C. College of
Engineering, Israna, affiliated to Kurukshetra University, Kurukshetra for the
award of the Degree of Bachelor of Technology in Electronics and
Communication is a record of bonafide work carried out by her under my
supervision. In my opinion, the seminar has reached the standards of fulfilling the
requirements of the regulations to degree

Guide Name:

Mr. Rohit Anand
Department of Electronics & Communication Engineering
N.C. College of Engineering, Israna











INTRODUCTION

Line follower robot using microcontroler
A line follower is basically a machine designed to follow a path predetermined by
the user. The path maybe as simple as a straight or a curved line or it maybe as
complex as a 90 degree turn and junction counting capabilities. In our semester
project, we will concentrate on simple tasks.
Line follower robot can detect bright light using specific sensors, and define it’s
motion accordingly. Line follower senses the line using it’s sensors and
maneuvers the mechanical structure to stay on course while constantly correcting
wrong moves.
The correct positioning of the sensors presents a feasible controlling strategy for
complex as well as simple tasks. A robot will know when to turn depending on the
location of the sensors. Number of sensors determines the smooth movement of
the robot. Optimum distance between the sensors depends on number of sensors,
width of straight line and the logic applied















CIRCUIT DIAGRAM









CIRCUIT DESCRIPTION OF LINE FOLLOWER
ROBOT
This line follower robot is design by basic microcontroller (8051). Microcontroller
is the heart of the embedded design. Output is obtained from port1 at which
7segmnt is connected and port2.4, 2.5, 2.6, 2.7 at which DC motor IC(L293D) is
connected as shown in circuit diagram. To play this remote control vehicle switch
swf
,
swb,sws are placed in on position (or pushed) port3. But when we press
switch swf

motor will move in forward direction and when switch swb is pressed
motor will move in reverse direction otherwise when sws is pressed it is in stop
condition. when we press switch swf then F is display on 7segment or when we
press switch swb then B is display on 7segment or when switch sws is pressed
then S is display on the 7segment.

















LIST OF COMPONENTS

S.NO. NAME OF COMPONENTS

VALUE SPECIFICATION
1.
Microcontroller(8051)
1
2.
Capacitor 1
3.
Registor 1
4.
7segment 1
5.
Dc motor IC(L293D) 1
6.
Dc motor 2
7.
Crystal osscilator 1
8.
Switch 4
9.
Ceramic capacitor 2
10.
Battery 1
11.
12.
13.
14.











Applications of Project





















Conclusion






















LIST OF REFERENCES/ DATASHEETS

S.NO.

NAME TOPICS
1.
2.