MACCS 400 Version 2 Multi Axis Conformal Coating System for application of conformal coating materials
Content
ACR Model 400
Multi Axis Conformal Coating System
The ACR Multi-Axis Conformal Coating System (MACCS) provides a reliable robotic conformal coating application platform for low, medium and high volume batch and inline conformal coating processing. Equipped with programmable software and servo motor control, the straightforward design means ease of application and maintenance at all levels of the conformal coating cycle.
SPECIFICATIONS MACCS 400 SPECIFICATIONS
MOTION CONTROL:
Type: Servo motors, slides on XYZ axes, 560 degree rotation axis and 20 degree valve tilt mechanism XYZ Repeatability: 25 microns (0.001”) XYZ Resolution: 25 microns (0.001”) X-Y Velocity: up to 800 mm/s (32”/s) max
AREA: COATING AREA:
XYZ travel: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)
PCB HANDLING:
BATCH PCB Fixture: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”) INLINE PCB/pallet size:500mm x 480mm x 90mm (19.6”x 18.9”x 3.5”) Conveyor Type: Chain Min Conveyor Width: 50mm (1.97”) Max Conveyor Width: 480 mm (18”) Edge Clearance: 4.7mm (0.185”) Transport Height: 940mm - 965mm (37” – 38”) Communication: SMEMA
SCH reserves the right to make design changes to products to improve their function. These changes may occur between publishing.
OPTIONS: COATING FEED OPTIONS:
Cartridge or Pressure Vessel feed
FACILITIES REQUIREMENTS:
System Footprint: L: 1325 W: 1065 H: 1760 mm (L: 52.1” W: 41.9” H: 69.2”) Air Supply: 80 PSI dry, clean air Extraction: 600 CFM Power (Mains): 120/220 VAC, 50/60 Hz System Weight: 450 Kg’s Standards Compliance: CE
STANDARD FEATURES:
Front toughened glass for ease of viewing and maintenance Door Interlock controls for safety Purge and solvent cups for flushing Coating software, XP based, On-Board PC Remote teach pendant Internal UV and white light
OPTIONAL FEATURES:
Low level material sensor Built-in exhaust fan with air flow indicator Bar code reader Viscosity control of fluid Multiple head configuration Laser pointer In situ camera for manual alignment
FLUID DELIVERY METHOD:
Standard Options: 1. Dual Atomised Spray & Needle Valve 2. Non-Atomised Film Coating Valve
MANUFACTURED DESIGNED AND MANUFACTURED IN THE UNITED KINGDOM
SCH Technologies Ltd • Newburgh Building, McLinctock Way, Barnsley, South Yorkshire S70 6BF • UK Tel: +44(1226) 249 019 Fax: +44 (0) 1226 770 809 www.conformalcoating.co.uk
Multi Axis Conformal Coating System
The ACR Multi-Axis Conformal Coating System (MACCS) provides a reliable robotic conformal coating application platform for low, medium and high volume batch and inline conformal coating processing. Equipped with programmable software and servo motor control, the straightforward design means ease of application and maintenance at all levels of the conformal coating cycle.
SPECIFICATIONS MACCS 400 SPECIFICATIONS
MOTION CONTROL:
Type: Servo motors, slides on XYZ axes, 560 degree rotation axis and 20 degree valve tilt mechanism XYZ Repeatability: 25 microns (0.001”) XYZ Resolution: 25 microns (0.001”) X-Y Velocity: up to 800 mm/s (32”/s) max
AREA: COATING AREA:
XYZ travel: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)
PCB HANDLING:
BATCH PCB Fixture: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”) INLINE PCB/pallet size:500mm x 480mm x 90mm (19.6”x 18.9”x 3.5”) Conveyor Type: Chain Min Conveyor Width: 50mm (1.97”) Max Conveyor Width: 480 mm (18”) Edge Clearance: 4.7mm (0.185”) Transport Height: 940mm - 965mm (37” – 38”) Communication: SMEMA
SCH reserves the right to make design changes to products to improve their function. These changes may occur between publishing.
OPTIONS: COATING FEED OPTIONS:
Cartridge or Pressure Vessel feed
FACILITIES REQUIREMENTS:
System Footprint: L: 1325 W: 1065 H: 1760 mm (L: 52.1” W: 41.9” H: 69.2”) Air Supply: 80 PSI dry, clean air Extraction: 600 CFM Power (Mains): 120/220 VAC, 50/60 Hz System Weight: 450 Kg’s Standards Compliance: CE
STANDARD FEATURES:
Front toughened glass for ease of viewing and maintenance Door Interlock controls for safety Purge and solvent cups for flushing Coating software, XP based, On-Board PC Remote teach pendant Internal UV and white light
OPTIONAL FEATURES:
Low level material sensor Built-in exhaust fan with air flow indicator Bar code reader Viscosity control of fluid Multiple head configuration Laser pointer In situ camera for manual alignment
FLUID DELIVERY METHOD:
Standard Options: 1. Dual Atomised Spray & Needle Valve 2. Non-Atomised Film Coating Valve
MANUFACTURED DESIGNED AND MANUFACTURED IN THE UNITED KINGDOM
SCH Technologies Ltd • Newburgh Building, McLinctock Way, Barnsley, South Yorkshire S70 6BF • UK Tel: +44(1226) 249 019 Fax: +44 (0) 1226 770 809 www.conformalcoating.co.uk
