MARG Conveyors Llp.

Published on May 2017 | Categories: Documents | Downloads: 43 | Comments: 0 | Views: 272
of 4
Download PDF   Embed   Report

Comments

Content

marg
conveyors llp.

Truck Loader model VL500: excellent, robust and easy to operate vehicle loading conveyor, mounted on self locking swivel castor
or solid tyre. Has both end fixed height. Total reach inside truck up to 4 mt. (13 feet). Can be used for loading & unloading bags, boxes, crates etc up to 100 kgs. Operation switch is provide at truck end.

Hydraulic Truck Loader model HVL500: efficient and easy to operate vehicle loading conveyor, mounted on self locking swivel castor or solid tyre.
Vehicle end of arm is flexible, and is extremely useful to stack bags or boxes inside a vehicle. This is easily done by hydraulic cylinder &up-down push button. Total reach inside truck up to 4 mt. (13 feet). Can be used for loading & unloading bags, boxes, crates etc up to 100 kg. Operating switch provided at flexible end also.

Call Us:- (+91) 98900 10019 (+91) 98900 25520

marg
Multi Utility Vehicle Loader Model no: MUVL650
conveyors llp.

Model no MUVL650: Finally the most evolved unit amongst the vehicle loaders, this unit can be truly termed as
Multi Utility Vehicle Loader as it allows for all possible height adjustments ranging from 500 mm to 4000 mm above ground at both ends. Its multi utility ability allows it to double up as a bag stacker as well..!! It can be used to stack bags, boxes up to required stacking height saving space! It is equipped with forward-reverse belt. Extremely useful unit when loading, unloading and stacking operations are on inside warehouses, railheads, railway siding etc.,

ü Reduce manpower by more than half. ü Increase productivity and reduce fatigue. ü Reduce dependency on manual labor. ü Save cost increase profits. ü Reduce damages to final product due to mishandling. ü Easy to use and low maintenance unit.

marg
Motorised Bag Diverter
conveyors llp.

ü Makes use of high speed slider bed concept, and avoids using rollers

to support belt.
ü Superior design avoids bag jamming at point of diverter. ü Uses long life Polyurethane (PU) ribbed slider belt. ü Small and light weighted, hence so easy to install and operate. ü Can be installed on existing conventional conveyor systems as well. ü Available in fixed and traveling diverter designs.

FRP Spiral Gravity Chutes
ü Installed vertically, hence saves space and increase storage area. ü Not affected by corrosion or morning dew factor. Hence no need

for any maintenance.
ü No sharp corners exists, avoid any damage to bags, spillage and

wastage of final product.
ü Manufactured in modular design, so easy to install and replace in

case of damage. ü Available in 3 mtr to 8 mtr height or as per customer requirements.

marg
Hydraulic stackers & portable conveyors
conveyors llp.

Benefits of bag handling system.
ü Customized layout as per client requirement. ü Consist of overhead conveyors, road crossing conveyors, FRP spiral gravity chutes, bag diverters, mobile

conveyors, stackers up to stacking height 6 mtr.
ü Can be used at warehouses, railheads, godowns, factory sheds, production houses etc. ü Can combine direct truck loading from packing line or divert to warehouses for storage and stacking. ü Save immense labor, reduce dependency and increases productivity. ü Reduces damage to final product due to mishandling.

shed no. 3, gat no 271, gulhane industrial estate,near magnaflux systems, pirangut, tal: mulshi, dist: pune - 412108 (MAH), Phone No : +91 20 32420011, Email : [email protected] For Product Enquiries Call
Mr. Sagar Diwan +91 98900 10019 [email protected] Mr. Mandar Punde +91 98900 25520 [email protected]

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close