mechatronics
Content
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 1
www.andhracolleges.com
1. (a) What is fuzzy logic control system? Discuss its applications related to the manufacturing field. (b) What are the basic elements of mechatronics system? Discuss them briefly. [8+8] 2. (a) Explain the need of i. digital to analog converter and ii. analog to digital converter. (b) Explain an integrating amplifier with the help of neat sketch. [8+8] 3. (a) Explain with a suitable illustration, how a linear motion is used to produce rotary movement. (b) Explain the various components used in the hydraulic system. 4. (a) Explain the use of MOSFET as an on-off switch for a motor. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
(b) What is function of interfacing? Explain the need for interfacing the devices of mechatronics system. [8+8] 7. What is internal relay? What are the functions of it? Explain how it is used to control the other devices internally. [16] 1 of 1
www.andhracolleges.com
5. Explain how the speed of the induction motor is controlled using the variable frequency operation. [16] 6. (a) Explain the immediate and indirect addressing modes available in 8051 microcontroller. (b) What are the purposes and functions of Address Latch Enable (ALE) pin connection with 8051 micro controller? [8+8]
8. Explain the principle of operation of capacitive proximity sensor with a neat diagram. [16]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 2
www.andhracolleges.com
1. (a) What is meant by standalone control method and PC based control method? Distinguish between standalone and PC based control methods. (b) Discuss the role of mechatronics in automated manufacturing industry. [8+8] 2. (a) Explain the need for using the signal conditioning. (b) Sketch and explain differential amplifier. Also discuss its applications, limitations. [8+8] 3. (a) Explain the applications of hydraulic actuator systems. (b) Explain with a suitable illustration, how a linear motion is used to produce rotary movement. [8+8] 4. (a) What is brushless permanent magnet d.c. motor? Explain its characteristics. (b) What is solenoid? Explain the working principle of solenoid. 5. (a) Explain the four quadrant operation of a servo drive. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
7. (a) Describe the basic steps of operation for a PLC after it is turned on. (c) What is the difference between a PLC and a desktop computer? [5+6+5] 1 of 1
www.andhracolleges.com
(b) An ac induction motor is rated at 1750 rpm with a line frequency of 60Hz. If the motor is operated on a 50 Hz line, what will be its approximate speed? [8+8]
6. What is an assembly level language program? Explain the reasons why the coding is done in assembly language instead of being written in machine code directly by a programmer. [16]
(b) What will happen if the scan time for a PLC is greater than the time for an input pulse? Why?
8. When tuning a three mode control system by the ultimate cycle method it was found that oscillations began when the proportional band was decreased to 20 %. The oscillations had a periodic time of 200 sec. What are the suitable values of [16] KP , TI and TD ?
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 3
www.andhracolleges.com
1. Discuss the function, advantages and limitations of the following control systems: (a) Stand alone control system (b) PC based control system. [16] 2. (a) Explain the need of i. digital to analog converter and ii. analog to digital converter. (b) Explain an integrating amplifier with the help of neat sketch. [8+8] 3. (a) Draw the diaphragm-operated process control valve and explain the working principle. (b) Explain briefly about: i. Explain journal bearing and ii. hydrodynamic journal bearing. 4. (a) What is TTL circuit? Draw and explain 7402 TTL circuits. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
(b) Explain the advantages and disadvantages of a.c. motors over d.c. motors. [8+8] 5. What are the basic components of a relay? Explain the basic function of each relay. [16] (b) Explain the use of Rotate instruction. 8. Describe and compare the performance and properties of (a) Proportional control (b) Proportional plus integral control (c) Proportional plus integral control plus derivative control. 1 of 1
www.andhracolleges.com
6. (a) Explain all the addressing modes available to move a byte to a direct address. [8+8]
7. Explain the sequence of steps followed by programmable logic controller (PLC) in carrying out the program. Also explain the input/output processing methods in PLC. [16]
[5+5+6]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 4
www.andhracolleges.com
1. (a) Define ‘graphical user interface’ and ‘real time control system’. Discuss its applications and limitations. (b) Compare and contrast between traditionally designed watch and that of microprocess based designed watch using mechatronics elements. [8+8] 2. Explain the following: (a) Digital to Analog Converter (b) Signal conditioning process (c) Applications of amplifiers. 3. (a) Discuss the important applications of pneumatic actuator systems. (b) Draw the neat sketches of valve bodies and show the path of fluid flow. [8+8] 4. (a) Explain the advantages and disadvantages of ac motors over dc motors. [5+5+6]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
5. (a) Discuss in brief variable frequency control of AC motors. 6. Discuss the specifications of DAC (Digital to Analog Converter) and explain how it is interfaced with 8051 microcontroller. [16] 8. Describe and compare the characteristics of (a) Proportional controller (b) Proportional plus integral controller (c) Proportional plus integral plus derivative controller. 1 of 1
www.andhracolleges.com
(b) Draw sketches of a buffer and explain its characteristics.
[8+8]
(b) An induction motor is rated at 30 hp 1175 rpm. If the motor is connected to a variable frequency ac drive and operate the motor at 900 rpm, what is the maximum horsepower the motor can safely deliver? [8+8]
7. Explain the sequence of steps followed by programmable logic controller (PLC) in carrying out the program. Also explain the input/output processing methods in PLC. [16]
[5+5+6]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
Code No: N0303
Set No. 1
www.andhracolleges.com
1. (a) What is fuzzy logic control system? Discuss its applications related to the manufacturing field. (b) What are the basic elements of mechatronics system? Discuss them briefly. [8+8] 2. (a) Explain the need of i. digital to analog converter and ii. analog to digital converter. (b) Explain an integrating amplifier with the help of neat sketch. [8+8] 3. (a) Explain with a suitable illustration, how a linear motion is used to produce rotary movement. (b) Explain the various components used in the hydraulic system. 4. (a) Explain the use of MOSFET as an on-off switch for a motor. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
(b) What is function of interfacing? Explain the need for interfacing the devices of mechatronics system. [8+8] 7. What is internal relay? What are the functions of it? Explain how it is used to control the other devices internally. [16] 1 of 1
www.andhracolleges.com
5. Explain how the speed of the induction motor is controlled using the variable frequency operation. [16] 6. (a) Explain the immediate and indirect addressing modes available in 8051 microcontroller. (b) What are the purposes and functions of Address Latch Enable (ALE) pin connection with 8051 micro controller? [8+8]
8. Explain the principle of operation of capacitive proximity sensor with a neat diagram. [16]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 2
www.andhracolleges.com
1. (a) What is meant by standalone control method and PC based control method? Distinguish between standalone and PC based control methods. (b) Discuss the role of mechatronics in automated manufacturing industry. [8+8] 2. (a) Explain the need for using the signal conditioning. (b) Sketch and explain differential amplifier. Also discuss its applications, limitations. [8+8] 3. (a) Explain the applications of hydraulic actuator systems. (b) Explain with a suitable illustration, how a linear motion is used to produce rotary movement. [8+8] 4. (a) What is brushless permanent magnet d.c. motor? Explain its characteristics. (b) What is solenoid? Explain the working principle of solenoid. 5. (a) Explain the four quadrant operation of a servo drive. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
7. (a) Describe the basic steps of operation for a PLC after it is turned on. (c) What is the difference between a PLC and a desktop computer? [5+6+5] 1 of 1
www.andhracolleges.com
(b) An ac induction motor is rated at 1750 rpm with a line frequency of 60Hz. If the motor is operated on a 50 Hz line, what will be its approximate speed? [8+8]
6. What is an assembly level language program? Explain the reasons why the coding is done in assembly language instead of being written in machine code directly by a programmer. [16]
(b) What will happen if the scan time for a PLC is greater than the time for an input pulse? Why?
8. When tuning a three mode control system by the ultimate cycle method it was found that oscillations began when the proportional band was decreased to 20 %. The oscillations had a periodic time of 200 sec. What are the suitable values of [16] KP , TI and TD ?
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 3
www.andhracolleges.com
1. Discuss the function, advantages and limitations of the following control systems: (a) Stand alone control system (b) PC based control system. [16] 2. (a) Explain the need of i. digital to analog converter and ii. analog to digital converter. (b) Explain an integrating amplifier with the help of neat sketch. [8+8] 3. (a) Draw the diaphragm-operated process control valve and explain the working principle. (b) Explain briefly about: i. Explain journal bearing and ii. hydrodynamic journal bearing. 4. (a) What is TTL circuit? Draw and explain 7402 TTL circuits. [8+8]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
(b) Explain the advantages and disadvantages of a.c. motors over d.c. motors. [8+8] 5. What are the basic components of a relay? Explain the basic function of each relay. [16] (b) Explain the use of Rotate instruction. 8. Describe and compare the performance and properties of (a) Proportional control (b) Proportional plus integral control (c) Proportional plus integral control plus derivative control. 1 of 1
www.andhracolleges.com
6. (a) Explain all the addressing modes available to move a byte to a direct address. [8+8]
7. Explain the sequence of steps followed by programmable logic controller (PLC) in carrying out the program. Also explain the input/output processing methods in PLC. [16]
[5+5+6]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
Code No: N0303
Set No. 4
www.andhracolleges.com
1. (a) Define ‘graphical user interface’ and ‘real time control system’. Discuss its applications and limitations. (b) Compare and contrast between traditionally designed watch and that of microprocess based designed watch using mechatronics elements. [8+8] 2. Explain the following: (a) Digital to Analog Converter (b) Signal conditioning process (c) Applications of amplifiers. 3. (a) Discuss the important applications of pneumatic actuator systems. (b) Draw the neat sketches of valve bodies and show the path of fluid flow. [8+8] 4. (a) Explain the advantages and disadvantages of ac motors over dc motors. [5+5+6]
IV B.Tech I Semester Regular Examinations, November 2009 MECHATRONICS ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
www.andhracolleges.com
5. (a) Discuss in brief variable frequency control of AC motors. 6. Discuss the specifications of DAC (Digital to Analog Converter) and explain how it is interfaced with 8051 microcontroller. [16] 8. Describe and compare the characteristics of (a) Proportional controller (b) Proportional plus integral controller (c) Proportional plus integral plus derivative controller. 1 of 1
www.andhracolleges.com
(b) Draw sketches of a buffer and explain its characteristics.
[8+8]
(b) An induction motor is rated at 30 hp 1175 rpm. If the motor is connected to a variable frequency ac drive and operate the motor at 900 rpm, what is the maximum horsepower the motor can safely deliver? [8+8]
7. Explain the sequence of steps followed by programmable logic controller (PLC) in carrying out the program. Also explain the input/output processing methods in PLC. [16]
[5+5+6]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications USA-UK-Australia-Germany-France-NewZealand Universities List Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
