MGT 455 Entire Course-Gc

Published on September 2017 | Categories: Business/Law | Downloads: 50 | Comments: 0 | Views: 571
Download PDF   Embed   Report

MGT 455 Entire Course-Gc Click Link Below To Buy: http://hwcampus.com/shop/mgt-455-entire-course-gc/ Or Visit www.hwcampus.com Contact Us: [email protected] MGT 455 Entire Course-Gc MGT455 MGT 455 Grand Canyon Week 1 DQ 1 Research the definitions of various production and operations management terms used in Lecture 1. Perform a literature search on one of these terms. Discuss how this term can impact the ability for an operation to be competitive in the 21st century. Do not use a term posted by another student. MGT 455 Grand Canyon Week 1 DQ 2 Describe the differences between productivity and its subcomponents (total measure productivity, partial measure productivity, and multifactor measure productivity) related to production and operations management success. Week 1 Problems Details: Complete problems 1.1, 1.9, and 1.13 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 2 DQ 1 Discuss an example of a work-related project that is able to be broken down into structure, tasks, subtasks, and work packages, and why project management in the form of a CPM/PERT chart would be cost effective. MGT 455 Grand Canyon Week 2 DQ 2 What are two reasons project management is not well done in corporations? Why? What are some specific examples? Week 2 Problems Details: Complete problems 3.11 and 3.17 (parts c, d, e, and f) in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 3 DQ 1 Describe the various types of time-series and associative forecasting models. Which types of organizations are each of these most applicable to, and why? MGT 455 Grand Canyon Week 3 DQ 2 Why is forecasting important in organizations, especially as related to understanding the relevant time horizon to develop a forecast against? What are some examples from industry? Week 3 Problems Details: Complete problems 4.1, 4.3, 4.5, 4.25, and 4.27 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 4 DQ 1 Describe the similarities and differences between TQM and Six Sigma quality-management techniques. MGT 455 Grand Canyon Week 4 DQ 2 Discuss the aspects of Total Quality Management (TQM) and how they apply in service- and product-based businesses. Week 4 Problems Details: Complete problems 6.12, S6.11, S6.20, S6.23, S6.27, and S6.35 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 5 DQ 1 Discuss the four types of process strategies and give an example of each. Also, please share any personal industry experiences (if any) with each process strategy. MGT 455 Grand Canyon Week 5 DQ 2 Discuss the differences between utilization and efficiency as measures of system performance. Which (if any) is the most useful measure for an operations manager? Why? Week 5 Problems Details: Complete problems 7.5, 7.7, and 7.11 in the textbook. Complete supplement problems S7.3, S7.5, S7.7, S7.11, S7.15, and S7.28 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 6 DQ 1 Discuss the key factors that impact location decisions. As an example, if locating a facility in India, what location decisions would a fast-food chain have to consider as compared to the location decisions of a software company? MGT 455 Grand Canyon Week 6 DQ 2 Discuss the strategic importance of layout decisions. How important as these decisions in terms of a company’s long-term profitability goals? What are some examples? MGT 455 Grand Canyon Week 6 Assignment 9.11 Stanford Rosenberg Computing wants to establish an assembly line for producing a new product, the Personal Digital Assistant (PDA). The tasks, task times, and immediate predecessors for the tasks are as follows: TASK TIME (sec) IMMEDIATE PREDECESSORS A 12 — B 15 A C 8 A D 5 B, C E 20 D Rosenberg’s goal is to produce 180 PDAs per hour. a) What is the cycle time? b) What is the theoretical minimum for the number of workstations that Rosenberg can achieve in this assembly line? c) Can the theoretical minimum actually be reached when workstations are assigned? And more…… MGT 455 Grand Canyon Week 7 DQ 1 Evaluate various supply chain strategy considerations for managers moving products or services to the consumer. MGT 455 Grand Canyon Week 7 DQ 2 Discuss the advantages of using work sampling to understand how employees allocate their time among work activities. Week 7 Problems Details: Complete problems 11.5, S11.4, S11.9, S11.15, 12.1, 12.4, 12.13, and 12.17 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 7 Assignment Details: For this assignment, you will discuss how Christian principles can be applied to an operations management dilemma: Select one of the ethical dilemmas below from the text: Managing Quality (Chapter 6) (page 227) Process Strategy (Chapter 7) (page 291)A Layout Strategy (Chapter 9) (page 379) Supply Chain Management (Chapter 11) (page 453) Inventory Management (Chapter 12) (page 502) Briefly summarize the issue. Note that only a small portion of your paper’s content should be devoted to summarizing the issue. Respond to the following question(s) in the text: How can this issue be addressed from a Christian worldview? In other words, what guidance from a Biblical perspective could be applied to understand and possibly resolve the dilemma? The following GCU websites may be helpful: Doctrinal Statement (http://www.gcu.edu/About-Us/Doctrinal-Statement.php) and Mission and Vision (http://www.gcu.edu/About-Us/Mission-and-Vision.php.) In addition to addressing the questions, the student may also optionally frame the issue using ethical theories (Utilitarianism, Kantian ethics, Distributive Justice, Virtue ethics and Covenantal ethics). Note however that the questions provided must be addressed. Use external citations. Your paper should have at least six external citations (in additional to any Biblical citations) to help frame the issue. No Wikipedia citations are allowed. Prepare this assignment according to the APA guidelines found in the APA Style Guide, located in the Student Success Center. An abstract is not required. Format: use Times New Roman (font size: 12) with 1-inch margins. Submittal Submit your file in a Microsoft Word document. Ensure that your last name is in your file name. This assignment uses a grading rubric. Instructors will be using the rubric to grade the assignment; therefore, students should review the rubric prior to beginning the assignment to become familiar with the assignment criteria and expectations for successful completion of the assignment. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submited to Turnitin. MGT 455 Grand Canyon Week 8 DQ 1 Discuss several advantages of linear programming; clearly explain the reasons for your choices. MGT 455 Grand Canyon Week 8 DQ 2 Discuss several disadvantages of linear programming; clearly explain the reasons for your choices. Week 8 Problems Details: Complete problems B.1, B.5, B.7, B.11, and B.21 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. Details: Complete problems 14.8 and 14.9 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. Details: Complete problems D.1, D.3, D.6, and D.8 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin.

Comments

Content

MGT 455 Entire Course-Gc Click Link Below To Buy: http://hwcampus.com/shop/mgt-455-entire-course-gc/ Or Visit www.hwcampus.com Contact Us: [email protected] MGT 455 Entire Course-Gc MGT455 MGT 455 Grand Canyon Week 1 DQ 1 Research the definitions of various production and operations management terms used in Lecture 1. Perform a literature search on one of these terms. Discuss how this term can impact the ability for an operation to be competitive in the 21st century. Do not use a term posted by another student. MGT 455 Grand Canyon Week 1 DQ 2 Describe the differences between productivity and its subcomponents (total measure productivity, partial measure productivity, and multifactor measure productivity) related to production and operations management success. Week 1 Problems Details: Complete problems 1.1, 1.9, and 1.13 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 2 DQ 1 Discuss an example of a work-related project that is able to be broken down into structure, tasks, subtasks, and work packages, and why project management in the form of a CPM/PERT chart would be cost effective. MGT 455 Grand Canyon Week 2 DQ 2 What are two reasons project management is not well done in corporations? Why? What are some specific examples? Week 2 Problems Details: Complete problems 3.11 and 3.17 (parts c, d, e, and f) in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 3 DQ 1 Describe the various types of time-series and associative forecasting models. Which types of organizations are each of these most applicable to, and why? MGT 455 Grand Canyon Week 3 DQ 2 Why is forecasting important in organizations, especially as related to understanding the relevant time horizon to develop a forecast against? What are some examples from industry? Week 3 Problems Details: Complete problems 4.1, 4.3, 4.5, 4.25, and 4.27 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 4 DQ 1 Describe the similarities and differences between TQM and Six Sigma quality-management techniques. MGT 455 Grand Canyon Week 4 DQ 2 Discuss the aspects of Total Quality Management (TQM) and how they apply in service- and product-based businesses. Week 4 Problems Details: Complete problems 6.12, S6.11, S6.20, S6.23, S6.27, and S6.35 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 5 DQ 1 Discuss the four types of process strategies and give an example of each. Also, please share any personal industry experiences (if any) with each process strategy. MGT 455 Grand Canyon Week 5 DQ 2 Discuss the differences between utilization and efficiency as measures of system performance. Which (if any) is the most useful measure for an operations manager? Why? Week 5 Problems Details: Complete problems 7.5, 7.7, and 7.11 in the textbook. Complete supplement problems S7.3, S7.5, S7.7, S7.11, S7.15, and S7.28 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 6 DQ 1 Discuss the key factors that impact location decisions. As an example, if locating a facility in India, what location decisions would a fast-food chain have to consider as compared to the location decisions of a software company? MGT 455 Grand Canyon Week 6 DQ 2 Discuss the strategic importance of layout decisions. How important as these decisions in terms of a company’s long-term profitability goals? What are some examples? MGT 455 Grand Canyon Week 6 Assignment 9.11 Stanford Rosenberg Computing wants to establish an assembly line for producing a new product, the Personal Digital Assistant (PDA). The tasks, task times, and immediate predecessors for the tasks are as follows: TASK TIME (sec) IMMEDIATE PREDECESSORS A 12 — B 15 A C 8 A D 5 B, C E 20 D Rosenberg’s goal is to produce 180 PDAs per hour. a) What is the cycle time? b) What is the theoretical minimum for the number of workstations that Rosenberg can achieve in this assembly line? c) Can the theoretical minimum actually be reached when workstations are assigned? And more…… MGT 455 Grand Canyon Week 7 DQ 1 Evaluate various supply chain strategy considerations for managers moving products or services to the consumer. MGT 455 Grand Canyon Week 7 DQ 2 Discuss the advantages of using work sampling to understand how employees allocate their time among work activities. Week 7 Problems Details: Complete problems 11.5, S11.4, S11.9, S11.15, 12.1, 12.4, 12.13, and 12.17 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. MGT 455 Grand Canyon Week 7 Assignment Details: For this assignment, you will discuss how Christian principles can be applied to an operations management dilemma: Select one of the ethical dilemmas below from the text: Managing Quality (Chapter 6) (page 227) Process Strategy (Chapter 7) (page 291)A Layout Strategy (Chapter 9) (page 379) Supply Chain Management (Chapter 11) (page 453) Inventory Management (Chapter 12) (page 502) Briefly summarize the issue. Note that only a small portion of your paper’s content should be devoted to summarizing the issue. Respond to the following question(s) in the text: How can this issue be addressed from a Christian worldview? In other words, what guidance from a Biblical perspective could be applied to understand and possibly resolve the dilemma? The following GCU websites may be helpful: Doctrinal Statement (http://www.gcu.edu/About-Us/Doctrinal-Statement.php) and Mission and Vision (http://www.gcu.edu/About-Us/Mission-and-Vision.php.) In addition to addressing the questions, the student may also optionally frame the issue using ethical theories (Utilitarianism, Kantian ethics, Distributive Justice, Virtue ethics and Covenantal ethics). Note however that the questions provided must be addressed. Use external citations. Your paper should have at least six external citations (in additional to any Biblical citations) to help frame the issue. No Wikipedia citations are allowed. Prepare this assignment according to the APA guidelines found in the APA Style Guide, located in the Student Success Center. An abstract is not required. Format: use Times New Roman (font size: 12) with 1-inch margins. Submittal Submit your file in a Microsoft Word document. Ensure that your last name is in your file name. This assignment uses a grading rubric. Instructors will be using the rubric to grade the assignment; therefore, students should review the rubric prior to beginning the assignment to become familiar with the assignment criteria and expectations for successful completion of the assignment. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submited to Turnitin. MGT 455 Grand Canyon Week 8 DQ 1 Discuss several advantages of linear programming; clearly explain the reasons for your choices. MGT 455 Grand Canyon Week 8 DQ 2 Discuss several disadvantages of linear programming; clearly explain the reasons for your choices. Week 8 Problems Details: Complete problems B.1, B.5, B.7, B.11, and B.21 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. Details: Complete problems 14.8 and 14.9 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin. Details: Complete problems D.1, D.3, D.6, and D.8 in the textbook. Submit one Excel file. Put each problem result on a separate sheet in your file. You are not required to submit this assignment to Turnitin, unless otherwise directed by your instructor. If so directed, refer to the Student Success Center for directions. Only Word documents can be submitted to Turnitin.

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close