MSU-IIT Thesis Guidelines

Published on January 2017 | Categories: Documents | Downloads: 30 | Comments: 0 | Views: 174
of 95
Download PDF   Embed   Report

Comments

Content

MSU-ILIGAN INSTITUTE OF TECHNOLOGY
Andres Bonifacio Avenue, Tibanga
9200 Iligan City, Philippines

SCHOOL OF GRADUATE STUDIES

Special Project/Thesis/Dissertation Guide

Revised A.Y. 2014-2015

1

Table of Contents
Page

Introduction
Part One: Procedure and Guidelines for Special Project/Thesis/Dissertation
Preparation
A. Academic Requirements
B. Advisory Panel
C. Proposal
D. Special Project/Thesis/Dissertation Work
E. Acceptance for Defense
F. Oral Examination of Special Project/Thesis/Dissertation
G. Approval for Binding
H. Submission of Bound and Electronic Copies
I. Deadline
Part Two: Guidelines for the Organization and Format of Special
Project/Thesis/Dissertation
A. Organization of Materials
1. Front Matters
2. Text
3. Back Matters
B. Detailed Description of Each Section of the Manuscript
1. Front Matters
a) Certificate of Authentic Authorship
b) Title Page
c) Certificate of Panel Approval
d) Abstract
e) Dedication
f) Acknowledgments
g) Table of Contents
h) List of Tables / Figures / Appendices
2. Text
a) Body of Special Project / Thesis / Dissertation
b) Chapters and Sub-Chapters
c) Tables and Figures
3. Back Matters
a) Bibliography / List of References
b) Appendix
c) Vita
C. Technical Specifications
1. Paper Size and Quality
2. Paper Layout
3. Margins
4. Fonts and Font Size
5. Spacing
2

6. Pagination
7. Footnotes
8. Text Citations of References
9. Equations
10. Corrections and Errata
11. Printing
12. Binding and Labeling

3

A

Appendices
SGS FORM 1: NOMINATION OF MEMBERS ADVISORY PANEL

B

SGS FORM 2: REQUEST FOR CHANGE OF ADVISER / PANEL
MEMBER

C

SGS FORM 3: APPROVAL FOR PROPOSAL HEARING

D

SGS FORM 4: APPROVAL OF PROPOSAL

E

SGS FORM 5: NOMINATION OF MEMBERS ORAL
EXAMINATION PANEL

F

SGS FORM 6: APPROVAL FOR FINAL DEFENSE

G

SGS FORM 7: ORAL EXAMINATION REPORT IN DEFENSE OF
SPECIAL PROJECT / THESIS / DISSERTATION

H

SGS FORM 8: PANEL ORAL EXAMINATION REPORT

I

SGS FORM 9: APPROVAL FOR BINDING

J

SGS FORM 10: APPLICATION FOR WRITTEN EXAMINATION

K

SGS FORM 11: NOMINATION OF MEMBERS OF WRITTEN
EXAMINATION COMMITTEE

L

SGS FORM 12: WRITTEN EXAMINATION REPORT

M

SGS FORM 13: APPLICATION FOR INTENTION TO GRADUATE

N

SAMPLE FORM 1: CERTIFICATE OF AUTHENTIC AUTHORSHIP

O

SAMPLE FORM 2: TITLE PAGE

P (a)

SAMPLE FORM 3a: CERTIFICATE OF PANEL APPROVAL

P(b)

SAMPLE FORM 3b: SERTIPIKO NG PAGPAPATIBAY NG PANEL

Q

SAMPLE FORM 4: ABSTRACT

R

SAMPLE FORM 5: DEDICATION

S

SAMPLE FORM 6: ACKNOWLEDGMENTS

Page

4

T

SAMPLE FORM 7: TABLE OF CONTENTS

U

SAMPLE FORM 8: LIST OF TABLES

V

SAMPLE FORM 9: LIST OF FIGURES

W

SAMPLE FORM 10: LIST OF APPENDICES

X

SAMPLE FORM 11: CHAPTERS, TABLES, FIGURES, PAGINATION

Z

SAMPLE FORM 13: APPENDIX

AA

SAMPLE FORM 14: HARD COVER

AB

SAMPLE FORM 15: HARD COVER ON SPINE

5

PREFACE

This is a revised edition of the School of Graduate Studies’ Special
Projects/Theses/Dissertation Guide. In this time of borderless world when information is readily
accessible and academic institutions constantly find ways not only to convey but to create
knowledge, there is a need for our graduate students to constantly update themselves in current
research practices. This guide will hopefully help the students and research advisers in the
preparation, writing and production of their special projects/theses/dissertations.
We have refined and made clear some policies which we deemed to be problematic in
interpretation. These include the composition of the Advisory Panel and Oral Examination Panel
and the qualifications of the research adviser/s. Policies from the Special /Office Orders that we
have been implementing but were not yet incorporated in the previous edition have also been
added. These cover, among others, to the MA/MS students’ participation in the SGS colloquium
and the PhD and doctorate students’ presentation of their studies in national or international
conferences as additional requirements for graduation. A significant revision in this edition is the
updated APA style of citation.
Like what the previous edition has asserted, style and format may vary from program to program
and greatly depend on what the department and the specialization require. In order to further
enhance our research practices, the SGS is in the process of producing a Research Quickguide
which can greatly aid students in the understanding the basic principles of research writing.
What this and the Thesis Guide hope to achieve is to establish standards in research writing and
achieve consistency in the process. Consistency after all is a manifestation of academic discipline
and scholarship in research.
The vision of MSU-IIT in becoming a research university and to be recognized not only in the
ASEAN community but also worldwide seems to be a daunting task but ensuring the quality of
our research outputs is just few of the initiatives that the SGS can help in achieving this vision.
We would like to thank the MSU-IIT administration particularly Chancellor Sukarno D. Tanggol
and Vice Chancellor for Academic Affairs Dr. Edgaw W. Ignacio for their continuous support in
the endeavors of the SGS. We owe so much to our Program Coordinators who are more than
willing to share their time and insights in the revision of this guide and to our Asst. Dean, Dr.
Nelia G. Balgoa, for consolidating the suggestions and revisions for this edition.

Dr. Alita T. Roxas
Dean, School of Graduate Studies
September 12, 2014
MSU-IIT

6

PREFACE TO THE 2008 EDITION
Completing the manuscript for a special project, thesis or dissertation marks the culmination of a
degree. Faced with variations in writing style and format, it is imperative for a student to have, at
hand, a comprehensive guide.
In the absence of a clear-cut writing standard applicable to all fields of
specialization, many research advisers and students are content with accepting any style, on the
precept that it is used consistently throughout the manuscript. In effect, style from one
manuscript to another varies, even within the same School – a reality that can be seen from many
of the outputs in the School of Graduate Studies, particularly those prior to the 1st release of this
Guide in 2003.
Consistency in style is a major element in writing. For this reason, this Guide is
presented to assist students and advisers in the preparation, writing and production of a special
project, thesis or dissertation as a requirement for a degree. Although this is intended for students
taking up graduate courses, the same may be used by students in any academic level.
This Guide serves as a reference in writing but does not, in any way, guarantee
final acceptability of the manuscript. The student’s Oral Examination Panel, with due
consideration of technical and professional competency, remains the final arbiter.
We are thankful to the Graduate Program Coordinators, particularly those who
had spearheaded this guide in 2003 under the Deanship of Dr. Brigida A. Roscom, and with the
aid of Prof. Anita P. Rivera, then School Secretary. Likewise, we are thankful to the current
Program and College Coordinators who have unselfishly shared their experiences, insights and
concerns, through series of committee meetings, in order to come up with the policies that are
now an integral part of this Guide.
We are also thankful to the MSU-IIT administration under Chancellor Marcello P.
Salazar and Vice Chancellor for Academic Affairs Arnulfo P. Supe for their full support
particularly in the publication of this Guide.

____________________________
Jerson N. Orejudos, Ph.D.___
Dean, School of Graduate Studies

7

8

Part One:
PROCEDURE AND GUIDELINES FOR
SPECIAL PROJECT / THESIS / DISSERTATION PREPARATION

A. Academic Requirements
A student in thesis preparation must have been admitted to candidacy for a degree and
must have passed a comprehensive examination, if the program so requires.
1.

To be admitted to candidacy for a master’s program, a student must have earned 12
graduate units (6 units foundation/core courses and 6 units major courses) with a GPA
(Grade Point Average) of 2.0 or better. For doctoral programs, the student must have
earned at least 1/3 of the total graduate unit requirement with a GPA of 1.75 or better.
Otherwise, the student has to enroll in additional courses, as may be determined by the
Program Coordinator, until an overall GPA of 2.0, for master’s degree, or 1.75 for
doctoral degree, is attained.

2.

The comprehensive examination, if the program so requires, shall aim to test the
student’s ability to integrate and apply the knowledge that has acquired in the program of
study. The areas/subjects covered shall be prescribed by the program.

B. Advisory Panel
1.

The Advisory Panel, when created, is a group of qualified graduate faculty members
who guide the student in writing his/her thesis/dissertation/special projects. With the
approval of the Dean of the School of Graduate Studies, the Program Coordinator, who
may consider the student’s preference, appoints the members of the Advisory Panel which
comprises (a) the student’s thesis/dissertation adviser; and (b) at least two other members
for master’s programs; or at least three other members for doctoral programs, one of
whom is an off-campus member.
An off-campus member is one who is not associated with MSU-IIT. He/She may be a
faculty member of any reputable academic institution, e.g., UP, DLSU, ADMU, MSUMarawi and its other external campuses, and must be Ph.D or doctorate holder. He/She
may likewise be an expert who is working in non-academic institutions, e.g., industries,
companies, and the like.
SGS FORM 1: NOMINATION OF MEMBERS OF ADVISORY PANEL must be filled
out and submitted for this purpose.

2.

The Thesis/Dissertation adviser shall be the chairperson of the Advisory Panel. The
adviser for a masteral thesis must preferably be a Ph.D or doctorate degree holder. and
must have written a masteral thesis and/or a doctoral dissertation. A holder of a non-thesis
master’s or doctoral degree cannot be a thesis/dissertation adviser. In the case when the
9

adviser for a master’s thesis is not a Ph.D or doctorate degree holder, then it is strongly
advised that a co-adviser who is a Ph.D or doctorate holder must be appointed. The
adviser is preferably a faculty member of MSU-IIT.
In the case when an off-campus adviser is chosen, a co-adviser who is a faculty
member of MSU-IIT must be appointed. If the adviser is unable to enter the grade of the
student at the end of the semester, the co-adviser, through consultation with the adviser,
must be authorized to do so. The co-adviser receives the same honorarium as the adviser.
3.

All other members of the advisory panel, except the off-campus examiner/adviser,
must be graduate faculty of MSU-IIT.

4.

The composition of the advisory panel may be changed when there is a strong reason
necessitating the change, such as change of research topic, disability or prolonged leave
of absence by any member of the panel; a strained working relationship between panel
members, or between the adviser and the student; and the like, and only upon approval by
the Program Coordinator and the Dean of the School of Graduate Studies
.
SGS FORM 2: REQUEST FOR CHANGE OF ADVISER / PANEL MEMBER must
be filled out and submitted for this purpose.

5.

The Advisory Panel may eventually, but not necessarily, become the Oral
Examination Panel. The Oral Examination Panel is a group of qualified faculty members
who sit in during the defense of the student, suggests and recommends revisions if
necessary and decides on the outcome of the defense and grade of the student. Although,
it is highly recommended that for purposes of continuity, members of the Advisory Panel
will eventually be the same members in the Oral Examination Panel.

C. Proposal
1.

A Thesis/Dissertation proposal is submitted by the student to the members of the
Advisory Panel for a proposal hearing. Preferably, this is conducted within the semester
prior to one’s enrolment in a thesis course. A notice of proposal hearing is posted for
public information.

2.

SGS FORM 3: APPROVAL FOR PROPOSAL HEARING must be filled out by the
student and submitted for this purpose.

3.

The Advisory Panel makes written comments, suggestions, and approves the proposal
using SGS FORM 4: APPROVAL OF PROPOSAL.

Note: A student doing a special project should consult his adviser/panel for presentation
of his proposal and consequent approval thereof. Student need not fill out any form associated
with the proposal defense of the special project, nor pay any proposal defense fee.
10

D. Special Project/Thesis/Dissertation Work

E.

1.

Once the Special Project/Thesis/Dissertation proposal is approved by the advisory
panel, the student can start formal work on the research as proposed.

2.

The student registers for the Special Project/Thesis/Dissertation course during the
regular registration period for each semester while preparation is in progress, and
particularly in the semester in which the oral examination for the Special
Project/Thesis/Dissertation is to be conducted and in which the student is expected to
graduate. This enrolment entitles the student at least eighteen hours of tutorial sessions
with the adviser. The student assumes the responsibility of arranging the sessions with
his/her adviser.

3.

When the Special Project/Thesis/Dissertation is not completed after the semester of
formal registration, the course must be continually enrolled until it is completed,
defended and approved. This continuous registration rule is required whether or not the
student is enrolled in other courses; provided further that the maximum residency
requirement is not violated.

4.

Special Project/Thesis/Dissertation that is not finished within the semester enrolled in
must be reported as IP (In Progress) in the grading sheet of the student.

5.

In principle, the proposal hearing and the final oral examination should not be
conducted in the same semester. This is to give sufficient time for the student to
incorporate the suggestions of the Oral Examination Panel and to ensure the quality of the
research paper.

Presentation in the SGS Research Colloquium
1.

Pursuant to Special Order No. 1061, Series of 2012 (Enhancing Graduate Research
and Advising to Graduate Students at the School of Graduate Studies), all MA and MS
students are required to present a substantial portion of their theses and special projects
before they are finally defended for degree.

2.

All PhD and doctorate students, on the other hand, are required to present a
substantial portion of their dissertations in a national or international conference. They
are required to submit a certificate of participation to the SGS office as a proof of their
attendance and presentation in the conference.

3.

All graduate students are strongly encouraged to publish their research in peerreviewed national or international journals, preferably ISI accredited.

11

F.

Acceptance for Defense

1. The Oral Examination Panel is created when the formal work on the thesis as proposed is
completed. It may or may not be composed of the original members of the Advisory
Panel. In the case of oral examination on a dissertation, at least one off-campus examiner
(a graduate faculty from outside the campus, or an expert in the field of specialization
working in non-academic institutions) shall be included as additional member of the
examination panel. This brings to a total of four members, adviser included, in the oral
examination panel for a doctoral program.
2. The Special Project/Thesis/Dissertation adviser shall be the Chairman of the Oral
Examination Panel; however, he/she is a non-voting member.
3. Should an off-campus examiner be included in the Oral Examination Panel, the Program
Coordinator shall obtain the approval of the Dean of the School of Graduate Studies. If
the nominated examiner is accepted, the adviser shall write a letter of invitation to the
examiner. The letter should be noted by the Dean. The off-campus examiner shall receive
the regular honorarium for members in the panel, as approved by BOR.
4. SGS FORM 5: NOMINATION OF MEMBERS OF ORAL EXAMINATION PANEL and
SGS FORM 6: APPROVAL FOR FINAL DEFENSE are filled out and submitted to SGS
together with a copy of the draft of the special project/thesis/dissertation at least one week
before the expected date of oral examination. Each member of the examination panel is
also provided a copy of the draft at least one week before the oral examination.
5. Members of the Oral Examination Panel or the Program Coordinator may give written
comments before a Special Project/Thesis/Dissertation defense may be scheduled.
6. The Special Project/Thesis/Dissertation must show evidence of the student’s capacity for
sound research and must be a worthwhile contribution to knowledge.
7. The research is expected to be in good scholarly style and must be a distinct contribution
to knowledge. It must show the author’s ability to carry out a study and to organize
results expressed in good literary style.
8. Following general acceptance of the format, style and readiness of the Special
Project/Thesis/Dissertation, the oral examination is scheduled. A notice of the oral
examination, together with an extensive/expanded abstract of the study, in an A4- sized
bond paper, are posted for public scrutiny and information. This must be done at least one
week prior to the oral examination date. The members of the examination panel together
with the date, time and place of the oral examination must be clearly stated. Display is
placed preferably at the lobby of the College in which the program is offered.

12

G. Oral Examination of Special Project/Thesis/Dissertation
1.

The student must be registered in the appropriate semester during the final defense of
the Special Project/Thesis/Dissertation. An oral examination fee must be paid at the
Cashier’s Office. (Refer to the current fee scheme of the School of Graduate Studies)

2.

The oral examination on the completed Special Project / Thesis / Dissertation is open
to the public and shall be conducted by the Oral Examination Panel.

3.

At the end of the oral examination, the examiners shall submit a rating on the
student’s performance using SGS FORM 7: ORAL EXAMINATION REPORT and SGS
FORM 8: PANEL ORAL EXAMINATION REPORT to the School of Graduate Studies.

4.

The Dean of the School of Graduate Studies shall notify the student of the rating
he/she has received in the oral examination, together with the revisions, if any, required in
the Special Project/Thesis/Dissertation.

5.

A student will be disqualified from the program in case of a failure at a second try in
the oral examination. However, the student may be awarded a certificate of completion of
academic units.

6.

Special Project/ Thesis/Dissertation shall be rated qualitatively, i.e., IP (In-Progress),
P (Passed) or F (Failed) in the report of grades.

H. Approval for Binding

I.

1.

The student incorporates the required revisions and submits the revised copy to the
members of the Oral Examination Panel for approval.

2.

SGS FORM 9: APPROVAL FOR BINDING must be accomplished before the student
can reproduce copies of the manuscript for binding.

3.

No other pages may be added to the manuscript after it has been approved and
returned to the student for reproduction and binding.

Submission of Bound and Electronic Copies
1.

A bound copy of the approved manuscript, plus three (3) copies of an abstract (300 to
500 words), three copies of the research paper in a journal article form, and three (3)
CDs containing the electronic files of the manuscript and the abstract shall be submitted
to the School of Graduate Studies twenty (20) days before graduation day. These items
must be submitted before the adviser enters the grade of P (Passing) for the

13

dissertation/thesis/special project.

J.

2.

The School of Graduate Studies shall hand over the bound copy to the MSU-IIT Main
Library and the CDs to the following units/institutions: (1) to the SGS, (2) to the
Department where the student belongs and (3) to the National Library.

3.

Bound copies of the approved manuscript shall be submitted to the School of
Graduate Studies not more than one year from the date of approval of the manuscript.
Otherwise, a re-examination on the research shall be required.

Deadline
Progress report for special project/thesis/dissertation must be submitted any time
during the semester without jeopardy to any deadline set by the School of Graduate
Studies. Deadlines for oral defenses, including final submission of bound copies,
must be duly observed.

14

Part Two:
GUIDELINES FOR THE ORGANIZATION AND FORMAT OF A
SPECIAL PROJECT / THESIS / DISSERTATION

A.

Organization of Materials
The manuscript is arranged in the following sequence:

1.

Front Matters
Preliminary Pages
Certificate of Originality/
Authentic Authorship
Title page

Require Optional
d
*

Page Number

Has no page number
Page i, but number
does not appear

*
Not

Certificate of Panel Approval
(Black-bordered form)

Page ii, but number
does not appear

*
not

Abstract

*

Dedication

*

Acknowledgments
*

Table of Contents
List of Tables
List of Figures
List of Appendices
List of Illustrations
List of Symbols
List of Abbreviations
Preface or Introduction

Begin numbering
with iii
Adjust pagination
Accordingly
Continue with lower
Roman numerals
throughout
preliminary pages

*
*
*
*
*
*
*
*

2. Text

15

The text of the thesis is divided into chapters or sections. The text section is
numbered using Arabic numerals, beginning with the number 1 on the upper right-hand
corner. Each chapter or section must begin on a new page.
3.

Back Matters
Pages

Bibliography or List of
References
Appendix/Appendices
Vita
B.
1.

Required

Optional

*
*
*

Page Number
Continue numbering
in Arabic numerals
following the text
Continue numbering
Continue numbering

Detailed Description of Each Section of the Manuscript
Front Matters
a) Certificate of Originality / Authentic Authorship
 To ensure authentic authorship and to safeguard against plagiarism, a certificate of
authentic authorship is required in the manuscript.
 This is also in preparation for copyrighting in the future. (See SAMPLE FORM 1:
CERTIFICATE OF AUTHENTIC AUTHORSHIP)
b) Title Page
 This page contains the Research Title, School/College, Institute, Program of Study
(Degree), Author and Date of Publication (See SAMPLE FORM 2: TITLE PAGE)
 The title page is counted as page i (lower-cased Roman numeral), but unmarked.
Pagination is reflected in the Table of Contents.
 The research title should be in uppercase and centered. It should be presented in
descriptive words that will ensure electronic retrieval.
 If possible, use word substitute for formulae, symbols and subscripts/superscripts.
 The final line of the title page is the month and year in which the Special
Project/Thesis/Dissertation is approved by the Oral Examination Panel.
c) Certificate of Panel Approval
 This form, also called the “black-bordered form”, contains the SGS dry seal and
typed or printed on a laser/ink-jet printer. This must be secured from the Office of
the School of Graduate Studies. For output in Filipino, the Filipino version is used.
(See SAMPLE FORM 3a - CERTIFICATE OF PANEL APPROVAL or 3bSERTIPIKO NG PAGPAPATIBAY NG PANEL)
 The purpose of the certificate of panel approval is to enable the student’s adviser,
the members of the Oral Examination Panel, the Dean of the College and the Dean
of the School of Graduate Studies to indicate that the work satisfies the
requirements for the degree.

16

 Signatures of all members of the Oral Examination Panel, the Program Coordinator,
the Dean of the College and the Dean of the School of Graduate Studies are affixed.
Date for affixing the signatures are likewise indicated.
 The signatures should be originals and rendered in black ink.
 This is Roman page number ii, but unmarked. Pagination is reflected in the Table of
Contents.
d) Abstract
 The heading for this page is ABSTRACT in uppercase and bold attributes, centered
without punctuation. (See SAMPLE FORM 4: ABSTRACT)
 The body of the abstract, printed in double or one-and-one-half space, begins on the
fourth line below the heading
 An abstract is a general overview of the research. It is a summary of the study; a
statement of the experiment or problem, the procedure followed, the results and the
conclusions.
 It should be a succinct account that allows readers to make an accurate decision as
to whether the full contents will be beneficial to him/her.
 The maximum length for a dissertation abstract is 350 words; for a thesis/special
project, it is 200 words.
 Pertinent places, full names of people and other proper nouns useful in electronic
retrieval must be included.
 Diagrams, charts and tables, or other illustrated materials and formulae or equations
are not included in the abstract.
 Symbols, as well as foreign words and phrases, must be clearly and accurately
displayed.
 Transliterations for characters other than Roman and Greek letters and Arabic
numerals as well as accents and diacritical marks are included.
 Use present form in all sentence construction, if possible.
e) Dedication
 The heading of a one-paged DEDICATION need not appear on the dedication page,
and the text may be centered.
 This contains names of special people, e.g., family and friends, who are close to the
author and who have inspired him to completing the work (See SAMPLE FORM 5:
DEDICATION)
f) Acknowledgments
 The word ACKNOWLEDGMENTS in uppercase and bold attribute should be
centered. (See SAMPLE FORM 6: ACKNOWLEDGMENTS)
 This page expresses the student’s recognition of, and appreciation for, any special
assistance made by individuals or institutions, that are not mentioned in the
manuscript but have made an important contribution to the study.

17

g) Table of Contents
 The heading for this page is TABLE OF CONTENTS in uppercase and bold
attribute, centered without punctuation. (See SAMPLE FORM 7: TABLE OF
CONTENTS)
 The titles of chapters or sections must be listed and worded exactly as they appear
in the manuscript.
 Titles for the preliminary pages and for all chapters, except sub-chapters, are in
uppercase.
 The page number for the starting page of each part is listed flush at the right
margin.
 Any space between the last word of the title and the page number can be filled with
a dot leader.
h) List of Tables / Figures / Appendices / Illustrations / Symbols/ Abbreviations
 The headings for these pages are in uppercase and bold attributes, centered without
punctuation. (See SAMPLE FORMS 8 -10)
 All tables and figures are arranged in increasing Arabic numeral.
 Appendices, symbols and abbreviations are arranged alphabetically.
 Greek-lettered symbols are placed before Roman/English-lettered symbols
 Each acronym / symbol is indented and separated from the definition by a dash line.
 Consistency in the inclusion of tables and figures must be observed; if tables from
one chapter are included in the list, then tables from all the other chapters and the
appendix must be included.
 Each entry must list the same caption or title used for a table in the text.
 The most common mode of presentation is to single-space within and to doublespace between each entry.

2. Text
 Although the detailed organization of the text may vary among academic
disciplines, the formatting of the text must be followed consistently throughout.
 All headings and sub-headings should be presented in the same way in each chapter
or major section, in terms of capitalization, placement on the page, and kind of type
used.
 No headers or footers giving the titles of chapters, other sections, or the thesis are
allowed
a) Body of the Special Project/Thesis/Dissertation
 The manuscript is organized into logical chapters and sub-chapters as may be
shown below:
CHAPTER 1
1.1
1.2

INTRODUCTION
Background of the Study
Statement of the Problem
18

1.3
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5

Significance of the Study
REVIEW OF RELATED LITERATURE
RESEARCH DESIGN AND METHODOLOGY
RESULTS AND DISCUSSIONS
CONCLUSIONS AND RECOMMENDATIONS

 Numbering for each chapter is in Arabic numeral.
 The above chapters are just recommendatory. Chapters and sub-chapters other than
those stated above may be added.
b) Chapters and Sub-Chapters
 The heading for each chapter should be centered without punctuation. On the
second line following this heading is the title of the chapter. (See SAMPLE FORM
11: CHAPTERS; TABLES; FIGURES; PAGINATION)
 The next line starts on the fourth line below the title of the Chapter.
 The sub-titles are flush to the left margin.
 The first page of each chapter is counted, but unmarked. All other pages are marked
at the upper right hand margin using Arabic numerals.
 All major sections/chapters must begin on a new page; subsections/sub-chapters
need not.
 Whenever the heading of a section or subsection appears near the bottom of a page,
it must be followed by at least one line of text, or the heading should be forced to
the top of the next page.
c) Tables and Figures
 Table designates tabulated numerical data used in the body of the manuscript and in
the appendices. Figure designates all other non-verbal materials such as
illustrations, charts, graphs, maps, photographs, drawings, diagrams, and the like.
(See SAMPLE FORM 11)
 All tables and figures should be located right after the text that is referring to it and,
if possible, should be located such that they do not run over into the next page. If
this happens, subsequent pages of the illustration must include at least the
illustration number and the notation that it is continued, e.g., Table 1, contd.
 Illustrations may be presented horizontally or vertically. In either case, illustrations
must fit within the required margins, and page numbers must be placed consistently
throughout the entire manuscript.
 Table captions are typed above the table and figure captions are typed below the
figure. If an illustration is rotated, the coordinating caption must also be rotated.
 For tables and figures copied from other sources, the caption of such should include
the source.
 The captions for tables and figures must be identical with those used in the LIST
OF TABLES and the LIST OF FIGURES in the preliminary pages.
 Illustrations must be numbered consecutively throughout the entire manuscript. A
straight sequence (1, 2, 3, 4, etc.) or a decimal approach (1.1 , 1.2 , 1.3 , etc.) where
the first digit is the chapter number, and the digit after the decimal point is the
illustration number, may be used.
19

 Photographs, as a figure, must be scanned and converted to an electronic format for
simultaneous printing with the page.
 Oversized illustrations should be reduced; however, legibility must be maintained.
If not possible, a folded, oversized page may be included, which may be accordion
folded, so that it may be bound with the rest of the document. In this case, the page
number must appear in a manner consistent with the rest of the document.
 Alternatively, the oversized illustration may be folded and inserted in a manila
envelope no larger than 6.5 by 9.5 inches, which then may be mounted on a sheet of
white thesis paper. Each page enclosed in the envelope must be included in the
pagination of the thesis.
 Below is a sample of a table and a figure; note that the left and right border lines of
the table is flush with the left and right margins.

Table 1.1. This is the title of the first table. If the title is long such that it runs down the
next line, the first word of the next line must be flushed with that of the
previous line as shown by this example.
Column 1

Column 2

Column 3

Column 4

Row 1
Row 2

You can put any figure (caricature,
graphs, photographs, illustrations,
maps, charts, drawings, diagrams,
etc.) in this frame

Figure 1.1. This is the title of the first
figure.

3.
a)

Back Matters
List of References
 Special Projects/Theses/Dissertations must list of references, and the
documentation style must follow the APA citation style for documenting sources.
 References cited in the text of a research paper must appear in a Reference List.
This list provides the information necessary to identify and retrieve each source.
 REFERENCES is used instead of BIBLIOGRAPHY for the list of works cited.
 This must be in the same font type and point size as the rest of the manuscript.
 Entries are listed alphabetically by the author’s last name or by the title of the
article/book if there is no author or editor given.
20

 The first line of each entry starts at the margin; the second and third lines are
indented eight spaces .
 All entries are in double-spaced. There is no additional space between entries.
 Use the latest publishing date for the book or encyclopedia and the complete date
for newspapers, magazines or the Internet.
 See SAMPLE FORM 12: REFERENCES which illustrates the correct setup
including appropriate punctuation and underlining.
b) Appendix or Appendices
 The appendix provides a place for a supplementary material that is not necessary
for inclusion in any of the major chapters. Tables too detailed for the text
presentation, figures, technical notes, raw data, computer programs, musical scores,
sample questionnaires, schedules, case studies are common appendix materials.
(See SAMPLE FORM 13: APPENDIX)
 Appendices, presented in alphabetical order (A , B , C , D , …), and may be singlespaced, appear at the end of the manuscript only; they do not appear at the end of
each chapter. If the material appended has more than one page, subsequent pages of
the appendix must include at least the appendix letter and the notation that it is
continued. (e.g. APPENDIX A Cont’d)
 The font type and point size for the main heading, sub-headings, and illustration
captions of an appendix must match that of the text, but the font type and point size
of the materials in the body of the appendix may be different.
 Appendix material may also be included in compact disc form, with each compact
disc labeled as follows:
Your name
Special Project/Thesis/Dissertation Title
Degree, Department, University Name, and Year of Graduation
Appendix Number and Appendix Name
Example:
Chita P. Evardone, Ph.D.
Shadowability of Statistical Averages at Blowout Bifurcation
Ph.D. in Mathematics, Department of Mathematics
MSU-Iligan Institute of Technology, 2002
Appendix A: A Fortran Program for the Frequency Distribution
 The existence of a CD-ROM appendix must be indicated with a corresponding
paper appendix page.

c)

Vita
 It is a professional biography of the candidate that may include place and date of
birth, educational institutions attended (after high school), degrees and honors
awarded, titles of publications, and teaching and professional experiences.

21

 It should be short, concise, written in the third person and in the same font type and
point size as the rest of the manuscript.
 It must be double-spaced.
 It must be included as the last item in the table of contents.

22

C. Technical Specifications
1. Paper Size and Quality
 8.27" × 11.69" (A4 size), white, substance-20 book papers must be used.
 Manuscripts printed on better quality paper will look more professional and will
archive better.
2.

Paper Layout
 Paper must be printed / typed in portrait mode. Landscape mode is not allowed
except for purposes of accommodating unusually large tables, illustrations, and the
like.

3. Margins
 To provide allowance for trimmings during binding and later ease in microfilming
and copying, every page of the manuscript must meet these minimum margin
standards:
Top:
1.8” (note: pagination is at header 1.25” from the top of the page)
Bottom:
1.25”
Right:
1.25”
Left:
1.5” (binding edge)
 All manuscript materials must fit within these margin requirements (including page
numbers, tables, figures, and graphs)
4.

Fonts and Font Size
 Any legible font, except those that are script, italic, or ornamental, is acceptable for
the body of the text.
 A 12-point font size is recommended for Times New Roman; if Arial, Helvetica, or
Century Gothic fonts are used, the manuscript must be 11- or 12-point font.
 A consistent font and size must be observed throughout all sections of the
manuscript.
 Italics may be used for quotations and words in a foreign language.

5.

Spacing
 The manuscript, including the abstract, acknowledgments, vita, must be one-andone-half-spaced. This should be used consistently throughout the manuscript.
 Footnotes, endnotes, bibliographic entries, long quotations, items in lists, table of
contents, and appendices may be single-spaced, i.e., if that style is recommended by
the discipline.

6.

Pagination
 Each page of the entire manuscript must be numbered except for the certificate of
originality / authentic authorship page, title page, and the black-bordered certificate
of panel approval page.
 Preliminary pages are numbered consecutively in lower-cased Roman numerals; the
first page to be numbered is the Abstract page which is marked iii.
23

 The text and back matters are numbered consecutively in Arabic numerals,
beginning with 1 on the first page of the text.
 Page numbers must appear in the same location (upper right hand corner) on each
page except on the first page of Chapters where the page is counted but not marked.
 Page numbers must be consistent with the text in font size and style. It must also fit
within the margin requirements.
7.

Footnotes
 If footnotes are used, they are placed on the pages they annotate and should be
separated from the text by a line extending two inches from the left margin.
 If the discipline requires footnotes within a chapter, then the footnotes are to be
indicated by a superscript and numbered consecutively using Arabic numerals.
 The first line on the footnote is to be indented.
 If the footnote is more than one line length, typing is to be single-spaced.
 When more than one footnote is used on a page, footnotes should be separated by a
double space.
 The specified margins and font must be maintained when footnotes are used.

8.

Text Citations of References
 The American Psychological Association (APA) citation style, both for in-text and
list of references, will be used for theses, dissertations and special projects.
 References may be cited by giving the last name(s) of the author(s) and the year of
publication of the reference. Please see APPENDIX Y SAMPLE FORM 12:
REFERENCES for the format.

9.

Equations
 Equations must be numbered consecutively from (1.1), (1.2), etc., up to the end of
the paper, including any appendices. The equation number is used when referring to
equations. The first number refers to the chapter; the second number refers to the
nth occurrence of the equation within the chapter.
Example:
D(uv)w = αudw,v + αvdw,v + β du,,v + τ ABS(dw,u-dw,v)
(3.1)

10. Corrections and Errata
 No corrections in the form of correction tape or fluid, erasures, crash-outs, and the
like must be made on the final copy
11. Printing
 All print should be letter quality with dark black characters that are consistently
clear and dense.
 Dot matrix printing is not acceptable
 Ink jet, laser jet, or a similarly high-quality printer should be used.

24

12. Binding and Labeling
 The manuscript is bound using a hard cover, wrapped in transparent plastic, in black
for dissertation, maroon for thesis, and green for special project.
 The hard cover contains the title, name of the author, school, institute, place, date of
approval for binding, all of which are stamped in gold foil.
 Fourteen (14)-point Times New Roman font with bold attribute for all elements is
used. (See SAMPLE FORM 13: COVER PAGE)
 Except for the date, all other items are in uppercase

25

APPENDIX A
SGS FORM 1: NOMINATION OF MEMBERS OF ADVISORY PANEL
SGS Form 1
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
Date: _________________
NOMINATION OF MEMBERS OF ADVISORY PANEL
DISSERTATION
THESIS

The following graduate faculty members are recommended to compose the Advisory
Panel of Mr./Ms. _______________________________________________ in the graduate
program leading to the degree_______________________________________.
Name

Signature

1. __________________________

_______________ Chairperson/Adviser

2. __________________________

_______________ Member

3. __________________________

_______________ Member

4. __________________________

_______________ Member

5. __________________________

_______________ Member

The members of the Panel shall perform their functions in accordance with the Rules
and Regulations of the School of Graduate Studies. They shall be entitled to honoraria in
accordance with the Scheme of Honoraria approved by the Board of Regents, subject to the
usual accounting and auditing rules and regulations.
This panel shall be in force until it has submitted its report to the Dean of the School of
Graduate Studies.

RECOMMENDING APPROVAL:

APPROVED:

26

___________________________
Program/College Coordinator

_________________________________
Dean, School of Graduate Studies

Distribution:
Panel Members
Program Coordinator
College Coordinator
College Dean
SGS Dean

27

APPENDIX B
SGS FORM 2 : REQUEST FOR CHANGE OF ADVISER / PANEL MEMBER
SGS Form 2
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
REQUEST FOR CHANGE OF ADVISER / PANEL MEMBER
DISSERTATION
THESIS
SPECIAL PROJECT
Date: ______________

Name : __________________________________

Degree: __________________________

Change concurred in (please affix signature above printed name):

Adviser / Panel Member to be replaced:

Proposed Adviser / Panel Member:

________________________________

_____________________________

Reason(s) for replacement:

Requested by:

_______________________________
Student

Recommending Approval:

Approved:
28

_____________________________
Program/College Coordinator

_____________________________
Dean, School of Graduate Studies

Distribution:
Program Coordinator
College Coordinator
SGS Dean

29

APPENDIX C
SGS FORM 3: APPROVAL FOR PROPOSAL HEARING

SGS Form 3
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES

APPROVAL FOR PROPOSAL HEARING
DISSERTATION
THESIS

As members of the Advisory Panel of Mr./Ms. ________________________________,
we recommend approval of the student’s application for proposal hearing.

______________________________________
Chairperson

_______________
Date

_______________________________________
Member

_______________
Date

_______________________________________
Member

_______________
Date

_______________________________________
Member

_______________
Date

______________________________________
Member

_______________
Date

DATE: _________________________ TIME: _______________ PLACE:_____________

Recommending Approval:

Approved by:

30

________________________
Program/College Coordinator

___________________________
Dean, School of Graduate Studies
Date:______________________

IMPORTANT:
1. This form, together with a copy of the manuscript, must be submitted to the School of Graduate Studies at least
one (1) week prior to the scheduled proposal hearing.
2. Each member of the panel must be provided with a copy of the manuscript.
3. The proposal hearing must be open to the public.
4. The student must attach to this form the official receipt of the proposal fee.

31

APPENDIX D
SGS FORM 4: APPROVAL OF PROPOSAL
SGS Form 4
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
APPROVAL OF PROPOSAL
DISSERTATION
THESIS
Date filed: ______________
Name

:_______________________________________________________________

Degree

:__________________________________

Specialization:_______________

Dissertation/Thesis Title: _______________________________________________________
________________________________________________________________
Comments:

APPROVED:
Advisory Panel:

______________________________________
Chairperson/Adviser

_______________________________________
Member

_______________________________________
Member

_______________________________________
Member

_______________
Date

_______________
Date

_______________
Date

_______________
Date

32

_______________________________________
Member

_______________
Date

Note:
Submit this approval sheet and the Proposal, together with the recommendations of the examiners, to the School of
Graduate Studies.

33

APPENDIX D (Contd.)
APPROVAL OF PROPOSAL (Contd.)
SGS Form 4 (Contd.)
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
Date: _______________
PROPOSAL HEARING
DISSERTATION
THESIS

Name: _____________________________________________________________________
Dissertation/Thesis Title: _______________________________________________________
________________________________________________________________
Recommendations:

34

____________________________
Examiner
(Signature over printed name)

35

APPENDIX E
SGS FORM 5: NOMINATION OF MEMBERS OF ORAL EXAMINATION PANEL
SGS Form 5
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
__________________
Date
NOMINATION OF MEMBERS OF ORAL EXAMINATION PANEL
DISSERTATION
THESIS
SPECIAL PROJECT
The following graduate faculty members are recommended to compose the Oral
Examination Panel of Mr./Ms._______________________________________________ in the
graduate program leading to the degree ___________________________________ .
Name

Signature

1. __________________________

________________ Chairperson / Adviser

2. __________________________

________________ Member

3. __________________________

________________ Member

4. __________________________

________________ Member

5. __________________________

________________ Member

The members of the Panel shall perform their functions in accordance with the Rules
and Regulations of the School of Graduate Studies. They shall be entitled to honoraria in
accordance with the Scheme of Honoraria approved by the Board of Regents, subject to the
usual accounting and auditing rules and regulations.
This Panel shall be in force until it has submitted its report to the Dean of the School of
Graduate Studies.

Recommending Approval:

Approved by:

____________________________

___________________________
36

Program/College Coordinator

Dean, School of Graduate Studies

Distribution:
All Panel Members
Program Coordinator
College Coordinator
College Dean
SGS Dean

37

APPENDIX F
SGS FORM 6: APPROVAL FOR FINAL DEFENSE
SGS Form 6
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
APPROVAL FOR FINAL DEFENSE
DISSERTATION
THESIS
SPECIAL PROJECT
As

members

of

the

Oral

____________________________,

Examination
we

have

Panel

for

examined

the

his/her

defense

of

Mr./Ms.

manuscript

entitled

____________________________________________________________________________
_______________________________________________________________
and found it to be in order. We have not found any gross error in the manuscript.
therefore, recommend the approval of the student’s application for the final defense.
______________________________________
Chairperson / Adviser

We,

_______________
Date

_______________________________________
Member

_______________
Date

_______________________________________
Member

_______________
Date

_______________________________________
Member

_______________
Date

_______________________________________
Member

_______________
Date

DATE: _________________________ TIME: _______________ PLACE:_____________
Recommending Approval:

Approved by:

________________________
Program/College Coordinator

___________________________
Dean, School of Graduate Studies

38

Date:______________________
IMPORTANT:

1. This form, together with a copy of the manuscript, must be submitted to the School of Graduate Studies at
least one (1) week prior to the scheduled final defense.
2. An accompanying poster, in an A4 bond paper” (preferably tarpaulin), must be shown containing a summary
of the study
(Abstract, Introduction, Research Design and Methodology, Results and Discussion, Conclusions and
Recommendations).
3. Each member of the panel must be provided with a copy of the manuscript.
4. The final defense, which is a public oral examination, must be conducted at least one (1) month before
graduation day.
5. The student must attach to this form the official receipt of the defense fee.

39

APPENDIX G
SGS FORM 7: ORAL EXAMINATION REPORT IN FINAL
DEFENSE OF DISSERTATION/THESIS/SPECIAL PROJECT
SGS Form 7
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES

ORAL EXAMINATION REPORT IN FINAL DEFENSE OF
DISSERTATION
THESIS
SPECIAL PROJECT
Name of Student: ______________________________________________________________
Dissertation/Thesis/Special Project Title: ___________________________________________
_______________________________________________________________________
Date: _____________________
This evaluation form is designed to assist the panelists in making an objective evaluation
of the student’s manuscript and his/her oral performance. Please rate each item either passed
or failed.
1. Dissertation/Thesis/Special Project Presentation
a. Organization ----------------------------------------------------

_____________

b. Presentation -----------------------------------------------------

_____________

c. Content -----------------------------------------------------------

_____________

2. Mastery of Subject Matter ---------------------------------------------

_____________

3. Ability to defend ideas --------------------------------------------------

_____________

4. Receptiveness towards suggestions given -----------------------

_____________

Overall Evaluation:
Passed _____________

40

Failed _____________
Conditional __________

______________________________________
Examiner
(Signature over Printed Name)
Note: Write all suggested modifications or changes, if any, on the other sheet of paper.

41

APPENDIX G (Contd.)
ORAL EXAMINATION REPORT IN FINAL DEFENSE OF
DISSERTATION/THESIS/SPECIAL PROJECT (Contd.)

SGS Form 7 (Contd.)
(Updated Sept. 2007)
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES

Date: __________________

Name of Student: ______________________________________________________________
Dissertation/Thesis/Special Project Title: ___________________________________________
______________________________________________________________

Recommendations:

42

______________________________________
Examiner
(Signature over Printed Name)

43

APPENDIX H
SGS FORM 8: PANEL ORAL EXAMINATION REPORT
SGS Form 8
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
PANEL ORAL EXAMINATION REPORT
_________________
Date of Examination
We, the members of the Oral Examination Panel, report that we have examined
______________________________________________________.
(Name of Student)

On the basis of the student’s final defense of his/her
DISSERTATION
THESIS
SPECIAL PROJECT

we submit the following result:
He/She passed the final defense without modification of the manuscript.
He/She passed the final defense provided that the attached list of
suggestions/changes be reflected.
He/She failed the final defense because of the following reasons:
________________________________________________________
________________________________________________________
________________________________________________________
Remarks (if any):
____________________________________________________________________________
____________________________________________________________________________
Name
________________________________

Signature
_____________________

Chairperson / Adviser

________________________________

_____________________
44

Member

________________________________

_____________________

Member

________________________________

_____________________

Member

________________________________

_____________________

Member

45

APPENDIX I
SGS FORM 9: APPROVAL FOR BINDING
SGS Form 9
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
__________________
Date
APPROVAL FOR BINDING
DISSERTATION
THESIS
SPECIAL PROJECT

This

is

to

certify

that

we

have

examined

the

manuscript

of

Mr./Ms.

____________________________________________ and found that all the comments and
recommendations of the Oral Examination Panel had been reflected.

This certification is issued to allow the student to submit the manuscript for final binding.

The Oral Examination Panel:
Name

Signature

1. __________________________

__________________Chairperson/Adviser

2. __________________________

__________________ Member

3. __________________________

__________________ Member

4. __________________________

__________________ Member

5. __________________________

__________________ Member

Recommending Approval:

____________________________
46

Program/College Coordinator

Approved:

_____________________________
Dean, School of Graduate Studies

47

APPENDIX J
SGS FORM 10: APPLICATION FOR WRITTEN EXAMINATION
SGS Form 10
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
APPLICATION FOR WRITTEN EXAMINATION
Comprehensive Exam
Preliminary Exam (SDS)

Name: _________________________________________ Degree: ______________________
Major:

Indicate

whether

First

or

DATE:__________________

Second

______________________

examination.

TIME:___________________ PLACE: _________________

This is to certify that I have completed all the requirements of the graduate program
necessary in taking the Examination.

_______________________
Student

Recommending Approval:

Approved:

_________________________
Program/College Coordinator

___________________________
Dean, School of Graduate Studies

48

Reminders:

1. This application should be filed in the School of Graduate Studies at least one (1) week before
the intended date of examination.
2. The student must attach to this form the official receipt of the examination fee.

49

APPENDIX K
SGS FORM 11: NOMINATION OF MEMBERS OF WRITTEN EXAMINATION COMMITTEE

SGS Form 11
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
Date __________________
NOMINATION OF MEMBERS OF WRITTEN EXAMINATION COMMITTEE
Comprehensive Exam
Preliminary Exam (SDS)
The following graduate faculty members are recommended to compose the Written
Examination Committee of Mr./Ms. __________________________________ leading to the
degree ____________________________________________________________________.
Name

Signature

1. ________________________________

_____________ Chairperson/Adviser

2. ________________________________

_____________ Member

3. ________________________________

_____________ Member

4. ________________________________

_____________ Member

5. ________________________________

_____________ Member

DATE:__________________

TIME:___________________ PLACE: _________________

The members of the Committee shall perform their functions in accordance with the
Rules and Regulations of the School of Graduate Studies. They shall be entitled to honoraria in
accordance with the Scheme of Honoraria approved by the Board of Regents, subject to the
usual accounting and auditing rules and regulations.
This Committee shall be in force until it has submitted its report to the Dean of the
School of Graduate Studies.
Recommending Approval:

Approved:

___________________________

___________________________
50

Program/College Coordinator

Dean, School of Graduate Studies

Distribution:
All Committee Members
Program Coordinator
College Coordinator
College Dean
SGS Dean

51

APPENDIX L
SGS FORM 12: WRITTEN EXAMINATION REPORT
SGS Form 12
(Updated Sept. 2007)
Republic of the Philippines
Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City
SCHOOL OF GRADUATE STUDIES
Date __________________
WRITTEN EXAMINATION REPORT
Comprehensive Exam
Preliminary Exam (SDS)
This is to certify that Mr./Ms. _______________________________________________
obtained

the

following

results

in

the

written

examination

leading

to

the

degree

_________________________________________ given on __________________________.

Area

Score/Perfect Score

Remarks
(Passed or Failed)

Signature

Recommendations:

________________________
Chairperson/Adviser
Examination Committee
Attested by:
52

___________________________
Program/College Coordinator
Note: Two (2) copies of this written examination report shall be submitted to the School of Graduate Studies within two weeks after
the examination.

53

APPENDIX M
SGS FORM 13: APPLICATION FOR INTENTION TO GRADUATE
SGS Form 13
(Updated Sept. 2007)

Republic of the Philippines
Mindanao State University-Iligan Institute of Technology

SCHOOL OF GRADUATE STUDIES

APPLICATION FOR INTENTION TO GRADUATE
Name

: ___________________________

Date Filed: ____________________

Home Address:________________________

Local Address: _________________________

________________________

_________________________

Tel. No.

________________________

Tel. No. _________________________

Previous (BS or MS) Degree:______________________________________________________
Year Obtained : _______________________

Name of Institution ______________________
______________________________________

Degree Sought : _______________________

Major _________________________________
Minor _________________________________

Research Title for (pls. check): DISSERTATION THESIS
SPECIAL PROJECT
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Research Adviser: ________________________________________
Date of Comprehensive Exam (if any):_________________
Did you cross-register in any other schools?

______ Yes _____ No

Name of School
________________
________________
________________

Grade
_____
_____
_____

Courses Taken
____________
____________
____________

Units
____
____
____

MSU Equivalent Grade Units
______________ _____ ____
______________ _____ ____
______________ _____ ____

Have you applied for Transfer of Credits from other schools? _____ Yes
Name of School
________________

Courses Taken Units Grade
____________ ____ _____

_____ No

MSU Equivalent Grade Units
______________ _____ ____
54

________________
________________

____________ ____ _____
____________ ____ _____

When do you intend to graduate?

October _____

______________
______________
March _____

_____
_____

____
____

Summer _____

_______________________________
Research Adviser
_________________________________
Student’s Signature
Distribution: SGS Office
Program Coordinator

55

APPENDIX N
SAMPLE FORM 1: CERTIFICATE OF AUTHENTIC AUTHORSHIP

CERTIFICATE OF AUTHENTIC AUTHORSHIP

I hereby declare that this submission is my own work and, to the best of my knowledge,
it contains no materials previously published nor written by another person. This work does not
also contain material which, to a substantial extent, has been accepted for an award of any
other degree or diploma, except where due acknowledgement is made in the manuscript. Any
contribution made to the research by others, with whom I have worked at MSU-IIT or elsewhere,
is explicitly acknowledged in the manuscript.

I also declare that the intellectual content of this manuscript is the product of my own
work, except the assistance that I received in the project’s design, conception and style,
presentation and linguistic expression which I also acknowledged.

(Signed)………………………………………….

56

57

APPENDIX O
SAMPLE FORM 2: TITLE PAGE

THE EXPERIMENTAL STUDY OF IMPACT ABSORPTION CAPABILITY
OF A SQUARE – GRID DESIGNED CHIPBOARD MATERIAL

A THESIS
Presented to
the Graduate Faculty of
Master of Science in Mechanical Engineering
MSU - Iligan Institute of Technology
Iligan City

In Partial Fulfillment
of the Requirements for the Degree
MASTER OF SCIENCE IN MECHANICAL ENGINEERING

HERIBERTO S. GODORNES
February 2003

58

SAMPLE FORM 3a: CERTIFICATE OF PANEL APPROVAL
APPENDIX P (a)

Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City, 9200 Philippines
_________________________________________
SCHOOL OF GRADUATE STUDIES
CERTIFICATE OF PANEL APPROVAL
The dissertation, attached hereto, entitled “HATCHABILITY, LARVAL
GROWTH AND SURVIVAL OF AFRICAN CATFISH, Clarias gariepinus
Burchell AND ASIAN CATFISH, Clarias macrocephalus Gunther UNDER
DIFFERENT PHOTOPERIOD AND DIET”, prepared and submitted by
SAMSON A. MINO in partial fulfillment of the requirements for the degree
DOCTOR OF PHILOSOPHY IN BIOLOGY, is hereby recommended for
approval.
EPHRIME B. METILLO, Ph.D.
Member
___________

OLGA M. NUÑEZA, Ph.D.
Member
___________

Date

Date

ERMELINDA G. TOBIAS, Ph.D.
Adviser
___________
Date

This dissertation is approved in partial fulfillment of the requirements for the
degree DOCTOR OF PHILOSOPHY IN BIOLOGY.
EPHRIME B. METILLO, Ph.D.
Graduate Program Coordinator
________

ANGELINA M. BACALA, Ph.D.
Dean, College Science and
Mathematics
________

Date

Date

JERSON N. OREJUDOS, Ph.D.
Dean, School of Graduate Studies
________
Date

59

60

APPENDIX P (b)

SAMPLE FORM 3b: SERTIPIKO NG PAGPAPATIBAY NG PANEL

Mindanao State University
ILIGAN INSTITUTE OF TECHNOLOGY
Iligan City, 9200 Philippines
_________________________________________________
PAARALAN NG MGA PAG-AARAL NA GRADWADO
SERTIPIKO NG PAGPAPATIBAY NG PANEL

Itong
tesis
na
pinamamagatang
“XXXXXXXXXXXXXX
XXXXXXXXXXXX”, inihanda at isinumite ni XXXXXXXXXXX bilang bahagi ng mga
pangangailangan para sa digring MASTER OF ARTS IN FILIPINO, ay inirekomendang
tanggapin at pagtibayin.

XXXXXXXXXXXXXXXXX
Miyembro
___________

XXXXXXXXXXXXXXXXXXXXX
Miyembro
___________

Petsa

Petsa

XXXXXXXXXXXXXXXXXX
Miyembro
___________
Petsa

XXXXXXXXXXXXXXXX
Adbayser
___________
Pesta

Pinagtibay bilang bahagi ng pangangailangan para sa digring MASTER OF
ARTS IN FILIPINO.

61

XXXXXXXXXXXXXXXX
________

XXXXXXXXXXXXXXXXXXXX
Dean, College of Arts and Social
Sciences
________

Petsa

Petsa

Program Koordineytor

XXXXXXXXXXXXXXXXXXX
Dekano, Paaralan ng mga Pag-aaral na Gradwado
________
Petsa

62

63

APPENDIX Q
SAMPLE FORM 4: ABSTRACT

iii

ABSTRACT

The study of the impact absorption of a grid-designed chipboard material is carried out. A
rig is designed and fabricated for the experiments. The experiment involves impact and
deformation measurement with variable load at constant height.
All test specimens are made of a square grid-designed chipboard material measuring 20
cm by 4 cm. There are six types of specimens each having 4, 6, 8, 10, 22 and 34 pieces of 20 cm
× 4 cm chipboard material, respectively. The materials of each specimen are assembled in a
square grid pattern.
There are two groups of specimen: Group I  Specimen 1 to 6 without a glue in its joint
and Group II  Specimen 1 to 6 with glue at the top and bottom portion of the joints. A total of
150 test specimens without glue and 60 specimens with glue are used in the experiment.
The results show a trend with regards to impact, deformation and type of specimen at
varying loads. Of the six specimens tested, whether glued or not, specimen 4 (thirty sixth grid) is
considered the best based on the maximum impact absorption and minimum deformation
characteristics.
The study recommends to continue exploring the possibility of evaluating and testing
the impact absorption capability of materials other than chipboard and using loads greater than
2.5 kg and a height greater than 10.16 cm

64

APPENDIX R
SAMPLE FORM 5: DEDICATION

iv

This works is lovingly dedicated to

OUR ALMIGHTY GOD
My wife Florfe
My daughters Mariane Faye and Cristella June
My sons John Mikel and Aaron Christian
And my mother Florentina

65

`
ACKNOWLEDGMENTS

My heartfelt thanks go to the following persons for their valuable contribution in the
conduct and completion this study:
- to my adviser, Dr. Eliseo P. Villanueva, for his support and direction, motivation and
guidance;
- to Prof. Edwin O. Deiparine for his valuable motivation and encouragement for me to pursue
this study;
- to Madam Laureana S. Rosales and Mrs. Rosalinda R. Deleste of the Lyceum of Iligan
Foundation Management for their financial support;
- to Engr. Jane Maghuyop for her assistance in the report preparation;
- to Mr. Rodel Pumicpic, Jim Radaza And William Gella, for their help and assistance in the
fabrication of the different test specimens used in the project;
- to Mr. Tolentino V. Gomez, Jr. (MSU-IIT COE Lab. Tech) for his help in the fabrication of the
test rig for the experiment;
- most importantly, to my wife Maria Salome, to my children Mae Shogar and Herbert Anefel,
who gave me love, understanding, care and moral support during the course of my masteral
study; and
-

above all, to the Heavenly Father, for His unending love, guidance, and for giving me the
knowledge, wisdom, patience and strength all throughout this work.
Heriberto S. Godornes

66

APPENDIX T
SAMPLE FORM 7: TABLE OF CONTENTS
vi
TABLE OF CONTENTS

Page
TITLE PAGE ………………………………………………………………......
APPROVAL SHEET ……………………………………………………….....
ABSTRACT ……………………………………………………………………
DEDICATION …………………………………………………………………
ACKNOWLEDGMENTS…………………………………………………….
TABLE OF CONTENTS ……………………………………………………...
LIST OF TABLES …………………………………………………………….
LIST OF FIGURES …………………………………………………………...

i
ii
iii
iv
v
vi
vii
ix

CHAPTER
INTRODUCTION

1

Statement of the Problem ………………………...
Significance of the Study ………………………...
Theoretical Framework ……………………..........
Objectives of the Study …………………………..
Scope and Limitations …………………………...

2
2
3
13
14

2

REVIEW OF LITERATURE

16

3

METHODOLOGY

23

Approach and Presentation ………………………
Experimental Set-up .………………………….....
The Weighing Scale and its Limitation ………….
Test Specimen ……………………………………
Experimental Procedures ………………………...
Procedure for Impact and Deformation
Determination (without glue) ……………………
Procedure for Impact and Deformation
Determination (with glue: top and bottom
Portion only) ……………………………………..

23
24
25
29
33

1
1.1
1.2
1.3
1.4
1.5

3.1
3.2
3.2.1
3.3
3.4
3.4.1
3.4.2

33

34

67

APPENDIX T (Contd.)
SAMPLE FORM 7: TABLE OF CONTENTS (Contd.)

vii

Page
3.4.3
3.4.4
3.4.5
3.4.6

4

Procedure for Impact Determination (without
Specimen on the Test Rig) ………………………
Procedure for Tearing Strength Determination of a
Chipboard (Using a Universal Testing Machine…
Procedure for Density Determination of A
Chipboard …………………………………………
Determination of Spring Constant (k) of Weighing
Scale ………………………………………………
RESULTS AND DISCUSSION

35
36
38
39
41

Spring Constant (K) Determination ………………. 42
Theoretical Impact Determination ……………… 43
Chipboard Material ………………………………. 43

4.1
4.2
4.3
4.3.1
4.3.2
4.4
4.5
4.5.1
4.5.2
5
5.1
5.2

Tearing Strength of the Chipboard Material ……...
Density of the Chipboard …………………………
Impact Determination without a Test Specimen ….
Impact with Test Specimen ……………………….
Test Specimen without glue ………………………
Test Specimen with glue ………………………….

44
45
47
48
48
53

CONCLUSION AND RECOMMENDATIONS 67
Conclusions ………………………………………. 67
Recommendations ……………………………… 68

BIBLIOGRAPHY
APPENDICES
A
B
C

Experimental Data ………………………………... 90
Statistical Data ……………………………………. 95
Statistical Data ……………………………………. 100

CURRICULUM VITAE

68

69

APPENDIX U
SAMPLE FORM 8: LIST OF TABLES
ix

LIST OF TABLES

Table

Page

1

Total recorded catch and their relative abundance

26

2

Monthly catch of fish samples in Clarin, Misamis
Occidental

29

Monthly catch of fish samples in Punta Silum
Misamis, Occidental

30

Monthly catch of fish samples in Lugait, Misamis
Oriental

31

Monthly catch of fish samples in Jimenez,
Misamis Oriental

33

List of identified species caught in Iligan Bay
from February to May 2001

35

Fish species composition in Iligan Bay within
four month collection period

38

Average length and weight of the different genera
of fishes caught in Iligan Bay from the
month of February and May 2001

39

Physico-chemical parameters measured during
the monthly collections

42

Summary of the gut contents found from the
stomachs of fishes collected in Iligan Bay
from the months of February to May 2001

43

3

4

5

6

7

8

9

10

70

APPENDIX V
SAMPLE FORM 9: LIST OF FIGURES

xi

LIST OF FIGURES

Figure

1

Page

Map of Iligan Bay showing the four fish sampling
stations

20

Digital planimeter used for computing the surface
area of the tail

24

3

Full Cluster dendrogram of sixty-six fishes

66

4

Dendrogram showing the three major groups

67

5

Diet characteristics of Group I

69

6

Diet characteristics of Group II

70

7

Diet characteristics of Group III

71

8

The food web of Iligan Bay

82

2

71

APPENDIX W
SAMPLE FORM 10: LIST OF APPENDICES

xii

LIST OF APPENDICES

Appendix

Page

A

Taxonomy of the Collected Species

91

B

Photographs of the Collected Species

108

C

Photographs of the Different Food Items

142

D

Percentage Composition by Weight of Food
Item from the Stomachs of Fish Species
Analyzed

149

E

Codes of Analyzed Fish Species

154

F

Similarity Matrix

156

72

APPENDIX X
SAMPLE FORM 11: CHAPTERS; TABLES; FIGURES; PAGINATION

CHAPTER 4

RESULTS AND DISCUSSIONS

4.1

Purity of bacterial isolates based on physical characteristics

Bacterial isolates: Bacillus spp. 1 and 2 and Chryseomonas sp. 2 which were known to
absorb heavy metal species from the previous study (Singh, 2011) were re-purified using the
standard techniques in microbiology. The purified bacteria have the same physical characteristics
based on the references chart for determination of cultural characteristics of isolates (Appendix
A) as in the previous study. Tables 4.1 to 4.3 list the observed cultural characteristics of this
research as against that previously characterized.

Table 4.1

Comparative summary of Bacillus sp. 1 from the previous (Singh, 2011) and
current research

Bacillus sp.1
Characteristic
4. Colony morphology
a.
Form
b. Elevation
c.
Margin
d. Color
5. Cell morphology
a. Gram Reaction
b. Shape
c. Arrangement of Cells

Previous (Singh,
2011)

Current

Circular
Flat
Entire
Creamy White

Circular
Flat
Entire
Creamy White

Positive
Long rods
Singly

Positive
Long rods
Singly

73

APPENDIX X (Contd.)
SAMPLE FORM 11: CHAPTERS; TABLES; FIGURES; PAGINATION (Contd.)

36

All the observed cultural characteristics are similar with that obtained in the previous
study. These suggest that the re-purified bacteria are the same bacteria that were used in the
previous study and in this research. Digital photographs of the purified bacterial isolates of this
research are shown in Figures 4.1 to 4.3. All the featured characteristics as observed in this study
are exactly the same with that observed in the previous study. The results confirm exactly that
the bacterial strains used in this study were the same with that of the previous study.

Figure 4.1.

Digital photograph of Bacillus sp.1.

74

APPENDIX X
SAMPLE FORM 11: CHAPTERS; TABLES; FIGURES; PAGINATION (Contd.)
85

Cmptr invader (x,y)
ICS
(x,y)
Filipino

foreigner

Figure 12. Computer Crim

or
read

o
r
InterfereIPserver
mascarading

open

download
PD (x,y)
Computer Crime Command (x. hacking)
UA (x,y)

or

o
r

obtain

LocationCitizenship
x,phil)
(x,p)

guess

o
r

User (x)
and

share
Denial service
Crippled sites
MT (x,y)
o
r
o
r
ICSS (x,y)
send

publish

Age (x, above
18)
o
r

Cmptr theft (x,y)

install create
o
r
open
IV (x,y)

modify

delete
Cmptr T(x,y)
open

o
r

interfere

or

75

APPENDIX X (Contd.)
SAMPLE FORM 11: CHAPTERS; TABLES; FIGURES; PAGINATION (Contd.)
125
Table 3. Abundance of reef fishes observed in the three 50m transects of the deep and shallow
station of Samburon, Linamon, Lanao del Norte.
TAXONOMY
1
ACANTHURIDAE
Ctenochaetus binotatus
C. striatus
Zebrasoma scopas
subtotal
APOGONIDAE
Apogon compressus
Apogon sp.
Archamia fucata
Cheilodipterus artus
C. quinquelineata
subtotal
AULOSTOMIDAE
Aulostomus chinensis
BALISTIDAE
Balistapus undulatus
CENTRISCIDAE
Aeoliscus strigatus
CHAESIONIDAE
Caesio teres
Pterocaesio lativittata
P. pisang
subtotal
CHAETODONTIDAE
Chaetodon barronesa
C. kleinii
C. vegabundus
Chaetodon sp.
Coradion Chrysozumos
Focipiger longirostris
Heniochus Chrysostomus
H. singularis
H. varius
subtotal

DEEP
2

3

Sum

SHALLOW
1
2
3

0
0
0
0

0
1
0
1

1

0
0
0
0
0
0

5

0

2

1
1

7

0
0
0
5
0
5
0

0

25

Sum

1

1

0

0

0
0
25
25

0
7
15
22

0
9
0
0
0
0
0
1
1
11

7
15

5

2
2

2

0
7
0
2
0
0
0
0
2
11

76

APPENDIX X (Contd.)
SAMPLE FORM 11: CHAPTERS; TABLES; FIGURES; PAGINATION (Contd.)
126

Table 3 (contd.)
CIRRHITIDAE
Cirrhitichthys falco
C. oxcephalus
subtotal
FISTULARIDAE
Fistularia commersonii
GOBIIDAE
Exyrias belissimus
HAEMULIDAE
Plechtorhinchus
chaetodoniodes
P.gateriniodes
HOLOCENTRIDAE
Sargocontron Microstoma
LABRIDAE
Bodianus diana
B. mesothorax
Cheilinus chlorourus
C. orientalis
Choreodon anchorago
Cirrhilabrus cyanopleura
Cirrhilabrus exquisitus
Coris gaimard
Coris variegata
Epibulus insidiator
Gomphosus varius
Halichoeres hartzfeldii
H. hotulanus
H. melanurus
H. melasmapomus
H. richmondi
H. scapularis
Hemigymnus melapterus
Labrichthys unilineatus
Labroides dimidiatus
Macropharyngodon

0
0
0

1

0
2
2

2

0

0

1

0

0
0
0

0
0
0

0

1

1
2

1

1

1

1
4
1

4

1

2
1

2

0
2
0
0
3
2
0
0
0
0
0
1
8
1
0
0
1
0
0
4
1

16

1
1

1

5

2
3
2
1

5

16
0
0
0
0
0
0
0
0
1
1
0
0
6
0
0
0
2
3
0
7
1

77

APPENDIX Y
SAMPLE FORM 12: REFERENCES
135
The APA Citation Style

The APA citation style refers to the rules and conventions established by the American
Psychological Association for documenting sources used in a research paper. APA style requires
both in-text citations and a reference list. For every in-text citation there should be a full citation
in the reference list and vice versa.
I.

Reference Citations in Text

In APA style, in-text citations are placed within sentences and paragraphs so that it is
clear what information is being quoted or paraphrased and whose information is being cited.
Examples:
1. Works by a single author
The last name of the author and the year of publication are inserted in the text at the appropriate point.
…..from theory on bounded rationality (Simon, 1945)
If the name of the author or the date appear as part of the narrative, cite only missing information in parentheses.
Simon (1945) posited that………..
2. Works by multiple authors
When a work has two authors, always cite both names every time the reference occurs in
the text. In parenthetical material join the names with an ampersand (&).
……..as has been shown (Leiter & Maslach, 1998)
In the narrative text, join the names with the word "and."
…….as Leiter and Maslach (1998) demonstrated
When a work has three, four, or five authors, cite all authors the first time the reference
occurs.
Kahneman, Knetsch, and Thaler (1991) found…….

78

In all subsequent citations per paragraph, include only the surname of the first author followed by "et al." (Latin for "and others") and the year of publication.
Kahneman et al. (1991) found ……..
3.

Works by associations, corporations, government agencies, etc.

The names of groups that serve as authors (corporate authors) are usually written out each
time they appear in a text reference.
………. (National Institute of Mental Health [NIMH], 2007)
When appropriate, the names of some corporate authors are spelled out in the first reference and abbreviated in all subsequent citations. The general rule for abbreviating in this manner
is to supply enough information in the text citation for a reader to locate its source in the Reference List without difficulty.
……..(NIMH, 2007)
4.

Works with no author

When a work has no author, use the first two or three words of the work's title (omitting
any initial articles) as your text reference, capitalizing each word. Place the title in quotation
marks if it refers to an article, chapter of a book, or Web page. Italicize the title if it refers to a
book, periodical, brochure, or report.
…..on climate change ("Climate and Weather," 1997)
…..Guide to Agricultural Meteorological Practices (1981)
Anonymous authors should be listed as such followed by a comma and the date.
…..on climate change (Anonymous, 2008)
5.

Specific parts of a source

To cite a specific part of a source (always necessary for quotations), include the page,
chapter, etc. (with appropriate abbreviations) in the in-text citation.
…..(Stigter & Das, 1981, p. 96)
……..De Waal (1996) overstated the case when he asserted that "we
seem to be reaching ... from the hands of philosophers" (p.
218).
79

If page numbers are not included in electronic sources (such as Web-based journals),
provide the paragraph number preceded by the abbreviation "para." or the heading and following
paragraph.
…….(Mönnich & Spiering, 2008, para. 9)

II. Reference List
References cited in the text of a research paper must appear in a Reference List. This list
provides the information necessary to identify and retrieve each source.











Order: Entries should be arranged in alphabetical order by authors' last names. Sources
without authors are arranged alphabetically by title within the same list.
Authors: Write out the last name and initials for all authors of a particular work. Use an
ampersand (&) instead of the word "and" when listing multiple authors of a single work.
e.g. Smith, J. D., & Jones, M.
Titles: Capitalize only the first word of a title or subtitle, and any proper names that are
part of a title.
Pagination: Use the abbreviation p. or pp. to designate page numbers of articles from periodicals that do not use volume numbers, especially newspapers. These abbreviations are
also used to designate pages in encyclopedia articles and chapters from edited books.
Indentation*: The first line of the entry is flush with the left margin, and all subsequent
lines are indented (5 to 7 spaces) to form a "hanging indent".
Underlining vs. Italics*: It is appropriate to use italics instead of underlining for titles of
books and journals.
REFERENCES is used instead of BIBLIOGRAPHY for the list of works cited.
Entries are double-spaced .

Two additional pieces of information should be included for works accessed online.




Internet Address**: A stable Internet address should be included and should direct the
reader as close as possible to the actual work. If the work has a digital object identifier
(DOI), use this. If there is no DOI or similar handle, use a stable URL. If the URL is not
stable, as is often the case with online newspapers and some subscription-based databases, use the home page of the site you retrieved the work from.
Date: If the work is a finalized version published and dated, as in the case of a journal article, the date within the main body of the citation is enough. However, if the work is not
dated and/or is subject to change, as in the case of an online encyclopedia article, include
the date that you retrieved the information.

The APA has special formatting standards for the use of indentation and italics in manuscripts or papers that will be typeset or submitted for official publication.

80

Examples:
1.

Articles in journals, magazines, and newspapers

References to periodical articles must include the following elements: author(s), date of
publication, article title, journal title, volume number, issue number (if applicable), and page
numbers.
1.1

Journal article, one author, accessed online

Ku, G. (2008). Learning to de-escalate: The effects of regret in
escalation of commitment. Organizational Behavior and
Human Decision Processes, 105(2), 221-232.
doi:10.1016/j.obhdp.2007.08.002

1.2 Journal article, two authors, accessed online
Sanchez, D., & King-Toler, E. (2007). Addressing disparities
consultation and outreach strategies for university
settings. Consulting Psychology Journal: Practice and
Research, 59(4), 286-295. doi:10.1037/1065- 9293.59.4.286

1.3 Journal article, more than two authors, accessed online
Van Vugt, M., Hogan, R., & Kaiser, R. B. (2008). Leadership,
followership, and evolution: Some lessons from the past.
American Psychologist, 63(3), 182-196. doi:10.1037/0003066X.63.3.182

1.4. Article from an Internet-only journal
Hirtle, P. B. (2008, July-August). Copyright renewal, copyright
restoration, and the difficulty of determining copyright
81

status. D-Lib Magazine, 14(7/8). doi:10.1045/july2008hirtle

1.5 Journal article from a subscription database (no DOI)
Colvin, G. (2008, July 21). Information worth billions. Fortune,
158(2), 73-79. Retrieved from Business Source Complete,
EBSCO. Retrieved from http://search.ebscohost.com

2. Magazine article, in print
Kluger, J. (2008, January 28). Why we love. Time, 171(4), 54-60.

3. Newspaper article, no author, in print
As prices surge, Thailand pitches OPEC-style rice cartel. (2008,
May 5). The Wall Street Journal, p. A9.

3.1. Newspaper article, multiple authors, discontinuous pages, in print
Delaney, K. J., Karnitschnig, M., & Guth, R. A. (2008, May 5).
Microsoft ends pursuit of Yahoo, reassesses its online
options. The Wall Street Journal, pp. A1, A12.

4. Books
References to an entire book must include the following elements: author(s) or editor(s),
date of publication, title, place of publication, and the name of the publisher.
4.1. No Author or editor, in print
Merriam-Webster's collegiate dictionary (11th ed.). (2003).
Springfield, MA: Merriam- Webster.
82

4.2. One author, in print
Kidder, T. (1981). The soul of a new machine. Boston, MA:
Little, Brown & Company.

4.3. Two authors, in print
Frank, R. H., & Bernanke, B. (2007). Principles of macroeconomics (3rd ed.). Boston, MA: McGraw-Hill/Irwin.

4.4 Corporate author, author as publisher, accessed online
Australian Bureau of Statistics. (2000). Tasmanian year book
2000 (No. 1301.6). Canberra, Australian Capital
Territory: Author. Retrieved from
http://www.ausstats.abs.gov.au/ausstats/subscriber.nsf/0
/CA2568710006989... $File/13016_2000.pdf

4.5 Edited book
Gibbs, J. T., & Huang, L. N. (Eds.). (2001). Children of color:
Psychological interventions with culturally diverse
youth. San Francisco, CA: Jossey-Bass.

5. Dissertations
References for dissertations should include the following elements: author, date of publication, title, and institution (if you accessed the manuscript copy from the university collections).
If there is a UMI number or a database accession number, include it at the end of the citation.
5.1. Dissertation, accessed online
Young, R. F. (2007). Crossing boundaries in urban ecology:
Pathways to sustainable cities (Doctoral dissertation).
83

Available from ProQuest Dissertations & Theses database.
(UMI No. 327681)

5.2 Essays or chapters in edited books
References to an essay or chapter in an edited book must include the following elements:
essay or chapter authors, date of publication, essay or chapter title, book editor(s), book title, essay or chapter page numbers, place of publication, and the name of the publisher.
5.3 One author
Labajo, J. (2003). Body and voice: The construction of gender in
flamenco. In T. Magrini (Ed.), Music and gender:
perspectives from the Mediterranean (pp. 67-86). Chicago,
IL: University of Chicago Press.

5.4 Two editors
Hammond, K. R., & Adelman, L. (1986). Science, values, and human
judgment. In H. R. Arkes & K. R. Hammond (Eds.),
Judgement and decision making: An interdisciplinary
reader (pp. 127-143). Cambridge, England: Cambridge
University Press.

6.

Encyclopedias or dictionaries and entries in an encyclopedia

References for encyclopedias must include the following elements: author(s) or editor(s),
date of publication, title, place of publication, and the name of the publisher. For sources accessed online, include the retrieval date as the entry may be edited over time.
6.1. Encyclopedia set or dictionary
Sadie, S., & Tyrrell, J. (Eds.). (2002). The new Grove
dictionary of music and musicians (2nd ed., Vols. 1-29).
84

New York, NY: Grove.

6.2. Article from an online encyclopedia
Containerization. (2008). In Encyclopædia Britannica. Retrieved
May 6, 2008, from http://search.eb.com

6.3

Encyclopedia article

Kinni, T. B. (2004). Disney, Walt (1901-1966): Founder of the
Walt Disney Company. In Encyclopedia of Leadership
(Vol. 1, pp. 345-349). Thousand Oaks, CA: Sage
Publications.

7. Research reports and papers
References to a report must include the following elements: author(s), date of publication,
title, place of publication, and name of publisher. If the issuing organization assigned a number
(e.g., report number, contract number, or monograph number) to the report, give that number in
parentheses immediately after the title. If it was accessed online, include the URL.
7.1. Government report, accessed online
U.S. Department of Health and Human Services. (2005). Medicaid
drug price comparisons: Average manufacturer price to
published prices (OIG publication No. OEI-05-0500240). Washington, DC: Author. Retrieved from
http://www.oig.hhs.gov/oei/reports/oei-05-05-00240.pdf

7.2. Government reports, GPO publisher, accessed online
Congressional Budget Office. (2008). Effects of gasoline prices
on driving behavior and vehicle markets: A CBO study
85

(CBO Publication No. 2883). Washington, DC: U.S.
Government Printing Office. Retrieved from
http://www.cbo.gov/ftpdocs/88xx/doc8893/01-14GasolinePrices.pdf

7.3. Technical and/or research reports, accessed online
Deming, D., & Dynarski, S. (2008). The lengthening of childhood
(NBER Working Paper 14124). Cambridge, MA: National
Bureau of Economic Research. Retrieved July 21, 2008,
from http://www.nber.org/papers/w14124

7.4.

Document available on university program or department site

Victor, N. M. (2008). Gazprom: Gas giant under strain. Retrieved
from Stanford University, Program on Energy and
Sustainable Development Web site:
http://pesd.stanford.edu/publications/gazprom_gas_giant_
under_strain/

8.

Audio-visual media

References to audio-visual media must include the following elements: name and function of the primary contributors (e.g., producer, director), date, title, the medium in brackets, location or place of production, and name of the distributor. If the medium is indicated as part of
the retrieval ID, brackets are not needed.
8.1.

Videocassette/DVD

Achbar, M. (Director/Producer), Abbott, J. (Director), Bakan, J.
(Writer), & Simpson, B. (Producer) (2004). The
corporation [DVD]. Canada: Big Picture Media Corporation.
86

8.2. Audio recording
Nhat Hanh, T. (Speaker). (1998). Mindful living: a collection of
teachings on love, mindfulness, and meditation [Cassette
Recording]. Boulder, CO: Sounds True Audio.

8.3. Motion picture
Gilbert, B. (Producer), & Higgins, C. (Screenwriter/Director).
(1980). Nine to five [Motion Picture]. United States:
Twentieth Century Fox.

8.4. Television broadcast
Anderson, R., & Morgan, C. (Producers). (2008, June 20). 60
Minutes [Television broadcast]. Washington, DC: CBS
News.

8.5. Television show from a series
Whedon, J. (Director/Writer). (1999, December 14). Hush
[Television series episode]. In Whedon, J., Berman, G.,
Gallin, S., Kuzui, F., & Kuzui, K. (Executive
Producers), Buffy the Vampire Slayer. Burbank, CA:
Warner Bros..

8.6. Music recording
Jackson, M. (1982). Beat it. On Thriller [CD]. New York, NY:
Sony Music.

87

9.

Undated Web site content, blogs, and data

For content that does not easily fit into categories such as journal papers, books, and reports, keep in mind the goal of a citation is to give the reader a clear path to the source material.
For electronic and online materials, include stable URL or database name. Include the author,
title, and date published when available. For undated materials, include the date the resource was
accessed.
9.1. Blog entry
Arrington, M. (2008, August 5). The viral video guy gets $1
million in funding. Message posted to
http://www.techcrunch.com

9.2. Professional Web site
National Renewable Energy Laboratory. (2008). Biofuels.
Retrieved May 6, 2008, from
http://www.nrel.gov/learning/re_biofuels.html

9.3. Data set from a database
Bloomberg L.P. (2008). Return on capital for Hewitt Packard
12/31/90 to 09/30/08. Retrieved Dec. 3, 2008, from
Bloomberg database.
Central Statistics Office of the Republic of Botswana. (2008).
Gross domestic product per capita 06/01/1994 to
06/01/2008 [statistics]. Available from CEIC Data
database.

88

10. Entire Web site

When citing an entire Web site (and not a specific document on that site), no Reference
List entry is required if the address for the site is cited in the text of your paper.
Witchcraft In Europe and America is a site that presents the
full text of many essential works in the literature of
witchcraft and demonology
(http://www.witchcraft.psmedia.com/).

Source:
Cornell University Library. (April 2011). APA citation style. Retrieved July 9, 2013, from
http://www.library.cornell.edu/resrch/citmanage/apa.

89

APPENDIX Z
SAMPLE FORM 13: APPENDIX
74

APPENDIX B

STATISTICAL DATA

Table B.1 Analysis of variance for angled cube based on the whole spindle
Degrees of
Freedom

Source

Sum of Squares

Velocity
Length of Sides
INTERRACTION
RESIDUAL

0.0195244
0.531726
0.0174909
0.00578774

4
3
12
40

Total (corr.)

0.574529

59

Mean Square

F-Ratio

P-Value

0.0048109
0.177242
0.00145758
1.44693E-4

33.73
1224.95
10.07

1.0E-4
1.0E-4
1.0E-4

Table B.2 Analysis of variance for angled cube based on the shortened spindle
Degrees of
Freedom
4
3

Source

Sum of Squares

Velocity
Length of Sides

0.00207977
0.2693

INTERRACTION
RESIDUAL

0.042541
0.0057927

12
40

Total (corr.)

0.319713

59

Mean Square

F-Ratio

P-Value

5.19942E-4
0.0897665

3.59
619.86

0.0136
1.0E-4

0.00354509
1.44817E-4

24.48

1.0E-4

Statistical Interpreter



The ANOVA table decomposes the variance of the data into four components: a component due to the
differences between levels of velocity, a component due to differences between levels of length of sides, a component due to
interactions between velocity and length of sides, and a residual component.

F-test has been run to determine which factors are statistically significant. The following factors have P-values
below 0.05 and thus correspond to statistically significant effects. These effects are velocity, length of sides and interaction.

90

Velocity

24

20
22

17

16

14

12

11

10

8

Table A. 1

0.08
0.1

0.04
0.05

Density: 1.182 kg/cu. m.

0.12

0.058

0.029

Temp. : 29.2 C

0.05

0.025

0.06

0.04

0.02

Pressure: 768.7 mmHg

0.03

0.015

0.02

0.01
0.025

0.01

0.005

0.013

4 mm

2 mm

DiameterSupporting

Height: 191 mm

Drag Force

Drag reading whole spindles

Velocity

20
22
24

17

16

14

12

11

10

8

Drag Force

Table A.2 shortened spindlesDrag reading on

EXPERIMENTAL DATA

APPENDIX A

APPENDIX Z (Contd.)
SAMPLE FORM 13: APPENDIX (Contd.)
66

91

APPENDIX AA
SAMPLE FORM 14: HARD COVER

ULTIMATE TENSILE AND COMPRESSIVE STRENGTH
OF CONCRETE CONTAINING COIR FIBERS

MILON P. LABADAN

SCHOOL OF GRADUATE STUDIES
MINDANAO STATE UNIVERSITY
ILIGAN INSTITUTE OF TECHNOLOGY
ILIGAN CITY

March 2001

92

93

APPENDIX AB (Contd.)
SAMPLE FORM 15: HARD COVER ON SPINE

|| A.C. SAVEDRA || A
DISTRIBUTED
DATABASE FOR THE …
|| MSCA || MSU-IIT ||
2002 ||

94

Prepared and submitted by the Graduate Coordinators’ Committee:

___________________________
Alita T. Roxas, D.M.
Dean, School of Graduate Studies

___________________________
Dr. Liwayway S. Viloria
Coordinator, Sustainable Development Studies

___________________________
Dr. Rizalina G. Gomez
Coordinator, College of Education

___________________________
Dr. Nelia G. Balgoa
Secretary, School of Graduate Studies

___________________________
Prof. Rhede Nelson J. Manulat

_____________________________
Dr. Mary Ann S. Sandoval

______________________________
Dr. Eliseo P. Villanueva

Coordinator, College of Arts and Social Sciences

Coordinator, College of Engineering

Coordinator, College of Business Administration

___________________________
Prof. Aloha May. H. Ambe
Coordinator, School of Computer Studies

Office Staff:

Ms. Bernadette H. Tumampil

___________________________

Ms. Vanessa Joy N. Ilago

___________________________

Mr. Benjamin V. Tubo

___________________________

95

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close