Other

Design of Multistory Concrete Buildings for Earthquake Motions by Blume, Newmark, and Corning,
Design of Concrete Buildings for Earthquake and Wind Forces by S.K. Ghosh and August W. Domel, Jr. in 1992.
Wind and Seismic Design of Buildings by S-K-ghosh
Reinforced-Concrete-Slabs-by-Robert-Park-and-William-L-gamble-2000
Structural-Dynamics-Theory-and-Computation 5th ed
Ghosh, S.K., and Domel, A. W. 1992. Design of Concrete Buildings for Earthquake and Wind Forces. Skokie, IL: Portland Cement
Association.
N. M. Newmark and E. Rosenblueth, Fundamentals of Earthquake Engineering,Prentice-Hall, Englewood Cliffs, N.J., 1971,640 pp.
R. L. Wiegel, editor, Earthquake Engineering, Prentice-Hall, Englewood Cliffs, N.J.,1970,518 pp.
Arnold, C., and Reithermau, R., Building Configuration and Seismic Design,John Wiley & Sons, New York, 1982, 296 p.
Collins, M. P., and Mitchell, D., Prestressed Concrete Structures, Prentice Hall,Englewood Cliffs, N.J., 1991,766 p.
Muto, K., A Seismic Design Analysis of Buildings, Maruzen, Tokyo, 1974, 361 p.
Libby, J. R., Modern Prestressed Concrete: Design Principles and Construction Methods, 4th ed., Van Nostrand Reinhold, New York,
1990.
Website www.raptsoftware.com rapt
www.dywidag-systems.com
The Seismic Design Handbook By Farzad Naeim
Nonlinear Mechanics of Reinforced Concrete By K. Maekawa
80. J. M. Biggs, Introduction to Structural Dynamics, McGraw-Hill Book Company, NewYork, 1964.
1. Guidelines for the Use of Structural Precast Concrete in Building 2nd Ed. Report of a Study Group of the New Zealand Concrete
Society and New Zealand Society for Earthquake Engineering 152 pages
22. D.E. Beskos, S.A. Anagnostopoulos. Computer Analysis and Design of earthquake resistant structures, handbook
35. R. E. Englekirk, Steel Structures: Controlling Behavior Through Design. John Wiley & Sons, New York, 1994.
39. E. G. Nawy, Fundamentals of High Performance Concrete, 2nd Edition. JohnWiley &Sons, New York, 2001.
Newmark, N. and Rosenbleuth, E. (1966). Seismic Design. Prentice Hall
Newmark, N.M. and Hall, W.J. (1987). Earthquake Spectra and Design. EERI Monograph,103 pp.
Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007). Direct Displacement-Based Seismic Design of Structures. IUSS Press
Design of Concrete Structures,15th ed,Nilson
Prestressed Concrete, A Fundamental Approach, 6th ed, Nawy
Reinforced Concrete Mechanics and Design 6th ed -J.G.MacGregor
G. G. Penelis and A. J. Kappos, Earthquake-Resistant Concrete Structures, E & FN Spon, New York, 1997
NPCAA Precast Concrete Handbook, 1st Edition", National Precast Concrete Association of Australia
"Prestressed Concrete Analysis and Design, Second Edition", A.E. Naaman, Techno Press 3000
Tall Building Structures: Analysis and Design By Bryan Stafford Smith,&nbspAlex Coull,
Steel Structures: Design and Behavior (xth Edition) By Charles G. Salmon, John E. Johnson
lبتكلاب ةصاخلا جماربلاو رشنلا رود عفاوم
Exact Solutions for Buckling of Structural Members
Sritharan, S., Aaleti, D., and Thomas, D.J. March 2007. Seismic Analysis and Design of Precast Concrete Jointed Wall Systems, ISU-
ERI-Ames Report. Ames, IA: Iowa State University.
Sritharan, S., and Thomas, D.J. June 2004. An Evaluation of Seismic Design Guidelines Proposed for Precast Jointed Wall Systems,
ISU-ERI-Ames Report ERI-04643. Ames, IW: Iowa State University.
Sritharun. S., Igarashi, A .. Priestley. M. 1. N., and Seible, F .. "Test Dcsign of the PRESSS Five-Story Precast Concrete Building."
Proceedi!lgs. 68th Annual Conve!ltion. Structural Engineers Association of California, Santa Barbara. CA. 1999. PIl·255-261.
November·December 1999
Yanez, R. Park, and T. Paulay, ―Seismic Behavior of Reinforced Concrete Structural Walls with Regular and Irregular Openings,‖ Pacific
Conference on Earthquake Engineering, New Zealand, November 1991.
Bowles, Joseph E. Foundation Analysis end Design .: NeWYork: McGra:w-Hilf1,:988.• '
Englekirk, Steel Structures: Controlling Behavior Through Design. John Wiley & Sons, New York, 1994.
Fleischman, R. B., Sause, R., Rhodes, A. B., and Pessiki, S., "Seismic Behavior of Precast Parking Structure Diaphragms,"
Proceedings, XIV ASCE Structures Congress, Building an International Community of Structural Engineers, S. K. Ghosh (Editor), V. 2,
Chicago, IL, April 15-18, 1996, pp. 1139-1146.
Fleischman, R. B. and Wan G., 2007, ―Appropriate Overstrength of Shear Reinforcement in Precast Concrete Diaphragms‖, ASCE J.
Struct. Engrg., Special Issue: Precast/Prestressed Concrete Structures under Natural and Human-Made Hazards, Vol. 133, Issue 11,
pp. 1616-26, Nov., Y. Kurama Ed.
Fleischman, R. B., and Farrow, K. T., ―Dynamic Response of Perimeter Lateral-System Structures with Flexible Diaphragms,‖ Journal of
Earthquake Engineering & Structural Dynamics, V. 30, No. 5, May 2001, pp. 745-763.
Fleischman, R. B., and K. T. Farrow. 2002. Seismic Performance of Perimeter Lateral System Structures with Highly Flexible
Diaphragms. Earthquake Spectra, V. 18, No. 2 (May).
Fleischman, R. B., Farrow, K. T. and Eastman, K.,2002, ―Seismic Performance of Perimeter Lateral-System Structures with Highly
Flexural Diaphragms‖, Earthquake Spectra, V. 18, No. 2, May, Earthquake Engineering Research Institute, Oakland, CA.
Fleischman, R. B., Farrow, K. T., and Eastman, K., ―Seismic Response of Perimeter Lateral-System Structures with Highly Flexible
Diaphragms,‖ Earthquake Spectra, V. 18, No. 2, May 2002, pp. 251-286.
Fleischman, R. B., Sause, R., Pessiki, S., and Rhodes, A. B., "Dynamic Response of Precast Parking Structures With Flexible
Diaphragms," paper in preparation.
Fleischman, R. B., Sause, R., Rhodes, A. B., and Pessiki, S., "Seismic Behavior of Precast Parking Structure Diaphragms,"
Proceedings, XIV ASCE Structures Congress: Building an International Community of Structural Engineers, Edited by S. K. Ghosh, V. 2,
Chicago, IL, April 15-18, 1996, pp. 1139-1146.
Park Robert "New Trends In the Design of Buildings and Bridge Structures For Earthquake Resistance," Fourth International Seminar
on Seismic Engineering. Universidad de Los Andes, Bogota, CoIombia September 1985.
Park Robert "New Zealand Research into Seismic design of Building Frames incorporating Precast Prestressed Concrete," ,
Proceedings, US/Japan Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan. October 1, 1986,
Park Robert "Precast Concrete in Seismic Resisting Building Frames in New Zealand: ' Concrete International. V.12. No. II . November
1990. pp. 43-51 .
Park Robert "Seismic Design Considerations for Precast Concrete Construction in Seismic Zones," Seminar on Precast Concrete
Construction in Seismic Zones, V. I, Japan Society for the Promotion of Science-United States National Science Foundation, Tokyo,
Japan. 1986. pp. 1-38.
Park Robert ―Ductile Design Approach for Reinforced Concrete Frames,‖ ―Earthquake Spectra,‖ Professional Journal of the Earthquake
Engineering Research Institute, V. 2, No. 3, May 1986, pp. 565-619.
Park Robert D. C. Kent, and R. A. Sampson. 1972.Reinforced Concrete Members with Cyclic Loading Journal of the Structural Division,
V. 98, No. 7: pp.1341–1360.
Park Robert Paulay, T., and Bull, D. K., ―Seismic Design of Reinforced Concrete Structures,‖ Technical Report No. 20, New Zealand
Concrete Society, October 1997.
Park, R. Some considerations in the seismic design of reinforced concrete interior beam-column joints of moment resisting frames,
Journal of the Structural Engineering Society of New Zealand, Vol. 15, No. 2, September 2002, pp. 53-64.
Park. Some controversial aspects of the seismic design of reinforced concrete building structures.
Stanton, J. F."Connections in Precast Concrete Structures:' Concrete International. V. 9. No. II. November 1987. pp. 49-53.
Stanton, J. F., and Nakaki, S. D. February 2002. Design Guidelines For Precast Concrete Seismic Structural Systems,PRESSS Report
No. 01/01-09. Chicago, IL: Precast/Prestressed Concrete Institute (PCI).
Stanton, J. F., and Nakaki, S. D., "PRESSS Industry Seismic Work-shops," PRESSS Research Report 91102, University of California at
San Diego, San Diego, CA, August 1991.
Stanton, J. F., and Nakaki, S. D., ―Design Guidelines for Precast Concrete Seismic Structural Systems,‖ Precast Seismic Structural
Systems (PRESSS) Report No. 01/03-09, University of Washington (UW) Report No. SM 02-02, Department of Civil Engineering,
University of Washington, Seattle, WA,
Stanton, J. F., and Nakaki. S. D . " PRESSS Industry Seismic Workshops," PRESSS Research Reports 91/01, 91/02 and 92106, edi ted
by M. J. N. Preistley, University of California at San Diego, San Diego, CA.
Stanton, J. F., Anderson, R. G., Dolan, C. W., and McCleary, D. E., "Moment Resistant Connections and Simple Connections," Final
Report to PCI, SFRD Research Project No. 114, 1986.
Stanton, J. F., Raynor, D. and Lehman, D. E. 2002. Bond Characteristics of Reinforcing Bars Grouted in Ducts. Accepted for publication
by ACI Str. Jo.
Stanton, J.F., and Nakaki, S.D. February 2002. Design Guidelines for Precast Concrete Seismic Structural Systems, PRESSS Volume
3-09. Chicago, IL: Precast/Prestressed Concrete Institute.
Stefano Pampanin .(2003). ―Alternative design philosophies and seismic response of precast concrete buildings‖, Structural Concrete
2003 Vol.4 No.4 . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category
Ali, A., and Wight, J., "Reinforced Concrete Structural Walls with Staggered Opening Configurations Under Reversed Cyclic Loading,"
Report No. UMCE 90-05, Department of Civil Engineering, University of Michigan, Ann Arbor, MI, April 1990,241 pp.
Ali, A., and Wight, J., ―RC Structural Walls with Staggered Door Openings,‖ ASCE Journal of Structural Engineering, V.117, No. 5, May
1991, pp. 1514-1531.
Allen, M., and Kurama, Y., ―Design of Rectangular Openings in Unbonded Post-Tensioned Precast Concrete Walls,‖ Research Report
No. NDSE-01-01, Department of Civil Engineering and Geological Sciences, University of Notre Dame, Notre Dame, IN, April 2001
(available for download at http://www.nd.edu/~concrete).
Applied Technology Council (ATC). 1981. ATC-8 Proceedings of a Workshop on Design of Prefabricated Concrete Buildings for
Earthquake Loads. Berkeley, CA: ATC.
Applied Technology Council. Design of Prefabricated Concrete Buildings for Earthquake Loads, ATC-8, Berkeley, California, 198 1.
Architectural Institute of Japan: Draft Japanese design guidelines for precast construction of equivalent monolithic reinforced concrete
buildings, Tokyo, 2000.
Armouti. N. S . "Seismic Performance of Precast Structural Walls." Ph.D. Thesis, Lehigh University. Bethlehem. PA.1993, 350 pp.
Aschheim, M., and Baldwin, J., "Analytical Assessment of Seismic Demand in Untopped Diaphragm Shear Connectors," 2000 PCI
Daniel P. Jenny Fellowship Research, University of Illinois at Urbana-Champaign.
Aswad, A .• "Selected Precast Connections: low Cyclic Behavior and Strength," Proceedings of the Second U.S. National Conference on
Earthquake Engincering. Earthquake Engineering Research Institute, Stanford. CA. August 22·24. 1979
Aswad, A., and Jacques, J. October 1983. Lecture 7: Detailed Design of Walls and Connections Post-Tensioning Alternative, Planning
and Design of a Precast Bearing Wall Building, Preprints for PCI Seminar. Chicago, IL: Prestressed Concrete Institute.
ATC-8 Design of Prefabricated Concrete Buildings for Earthquake Loads." Workshop sponsored by National Seismic Foundation. Los
Angeles. CA. December 1981.
Athol. J Carr. Ruaumoko, Inelastic Dynamic analyses.
Becker, J . M . Ll orente, C" and Mueller, P., "Seismic Response of Precast Concrete Walls." Earthquake Engineering and Structural
Dynamics .V. 8, No.6. November· December 1980, pp. 545-564.
Becker, J. M . and Llorente, C, ''The Seismic Response of Simple Precast Concrete Panel Walls," Proceedings of U.S. National
Conference on Earthquake Engineering, Stanford , CA. 1979.
Becker, J. M .. October 1983. Lecture 1: Introduction and Problem Statement, Planning and Design of a Precast Bearing Wall Building,
PCI Seminar Preprints. Prestressed Concrete Institute: p. 5.
Beskos, S.A. Anagnostopoulos. Computer Analysis and Design of earthquake resistant structures, handbook
Biggs, Introduction to Structural Dynamics. McGraw-Hill Book Company, New York, 1964.
Billings, I. J., and Thom, G. W., ―NZI Centre-Design of Multi-Storey Towers,‖ Proceedings of Pacific Concrete Conference,V. 1,
Auckland, New Zealand, November 1988, pp. 309-318.
Blume, N. M. Newmark, and L. H. Corning, ―Design of Multistory Reinforced Concrete Buildings for Earthquake Motions,‖ Portland
Cement Association, Skokie, Illinois, 1961.
Bockemohle, L. W., ―A Practical Paper on Design of Topped Concrete Diaphragms and Precast Concrete Structures,‖ Proceedings,
Workshop on Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, Redwood City, CA, 1981.
Cao, L.; Naito, C.; and Sause, R., ―Phase 1 Experimental Evaluation of Diaphragm Connections: Program Overview,‖ Report by DSDM
LU Group, Lehigh University, Bethlehem, PA, 2005.
Carr. A. J.. "Ruaumoko Program for Inelastic Dynamic Analysis -Uscrs Manual." Department of Civil Engineering. University of
Canterbury. Christchurch. New Zealand. 1998.
Cheok G. S and Lew. H. S "Performance of 1/J Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic
Loads." Report NlSTIR 4433, National Institute of Standards and Technology, Gaithersburg, MD, 1990. 94 pp.
Cheok G. S and Lew. H. S "Performance of I/3 scale Model Precast Concrete beam column connections Subjected to Cyclic Inelastic
Loads ." of First Meeting of the Joint Technica1 Coordination Committee on Struc:tum Diego, CA,1990. 104.
Cheok G. S and Lew. H. S "Performance of llJ Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic
Loads - Report No.2," Report NIST IR 4589, National Institute of Standards and Techno logy, Gaithersburg, MD, 1991 ,77 pp.
Cheok G. S and Stone. W. c. "Performance of I/J Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic
Inelastic Loads - Report No.3," Report NISTIR 5246, National Institute of Standards and Technology, Gaithersburg. MD. 1993, 129 pp.
Cheok, G., and Stone, W., ―Performance of 1/3-Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic
Loads—Report No. 4,‖ NISTIR 5436, National Institute of Standards and Technology (NIST), Gaithersburg, MD, June 1994.
Cook, R. D., D. S. Malkus, and M. E. Plesha. 1989. Concepts and Applications of Finite Element Analysis. 3rd ed. New York, NY: J.
Wiley & Sons.
Dame, Notre Dame, IN, November 2001, 259 pp. (available for download at http://www.nd.edu/~concrete)
Davies, Go, Elliott. K. S., and Omar, W .. "Horizontal Diaphragm Action in Precast Concrete Floors," The Structural Engineer (London).
V. 68. No.2. January t990, pp. 25-33.
Day, S., "Cyc[ic Load Testing of Precast Hybrid Moment Frame Connections," MSCE Thesis. Department of Civil Engineering,
University of Washington, Seallle, WA, 1999.
design Partially Prestressed precast concrete ductile moment Relisting Frames," Proceedings of the Technology Conference, ATC-8,
Los Angeles, California, April29
Dowrick, D.J., Earthquake Resistant Design, A Manual for Engineers and Architects, Jbhn Wiley & Sons, 1977, 160.
DSDM, 2006, Year 2 Report to National Science Foundation, (NSF) GOALI Project ―Development of a Precast Floor Diaphragm
Seismic Design Methodology (DSDM)‖, Aug 17, 2006.
DSDM, Meeting Minutes, RM#1, Chicago, IL, August 7, 2003, http://central.nees.org
Ehllorsi. M . "Seismic Design of Precast Walls," M.S. Thesis. Department of Civil Engineering and Engineering Mechanics, McMaster
University,Hamilton. Ontario, Canada. 1994.193 pp.
EI-Sheikh, M. Sause, R., Pessiki, S. Lu. L-W. and Kurama, Y., "Seismic Analysis, Behavior and Design of Unbonded Post-Tensioned
Precast Concrete Frames," PRESSS Report No. 98/04 (also Report No. EQ-97-02), Department of Civil and Environmental
Engineering, Lehigh University, Bethlehem, PA, November 1997.
EI-Sheikh, M., "Seismic Analysis, Behavior. and Design of Unbonded Post-Tensioned Precast Concrete: Frames." Ph.D. Dissertation.
Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, October 1997, 456 pp.
Elliot. K. S Davies, G .. and Mahdi. A. A "Semi-Rigid Joint Behavior on Columns in Precast Concrete Buildings." COST CI Proceedings
of First Workshop. Semi-Rigid Behavior of Civil Engineering Structural Connections , E.N.S.A. I. S. , Strasbourg, France, 1992, pp. 282-
295.
Englekirk, R. E., "An Evaluation of the State of the Art in the Design and Construction of Prefabricated Buildings in Seismically Active
Areas of the United States," Earthquake Resistant Reinforced Building Construction, June 1978.
Englekirk, R. E., and Seina, L.G. , "Criteria for the Design Concrete Systems," ATc Proceedings of a Workshop on Design of
Prefabricated Concrete Buildings for Earthquake Loads. April 27-29. 198 1. pp. 639-656.
Englekirk:, Art Design and Construction of Prefabricated Buildings in Seismically Active Areas of the United Stales," Earthquake
Resistant Reinforced Building Construction, lune 1978.
Englekirk and M. Pourzanjani, ―High Strength Concrete Applications in Regions of High Seismicity,‖ Proceedings of the Fifth Conference
on Tall Buildings in Seismic Regions, Los Angeles, California, May 5, 2000, pp. 201–217.
Englekirk R E., " St ate-of- the-Art design Perspective" Seminar on Precast Concrete Construction in Seismic Zones. Japan Concrete
institute. Tokyo, October 1986. 1-1.
Englekirk, G. C. Hart, and the Concrete Masonry Association of California and Nevada, Earthquake Design of Concrete Masonry
Buildings, Volume 1. Prentice Hall, Englewood Cliffs, New Jersey, 1982.
Englekirk, R. and C .C "Earthquake Design of Concrete masonry buildings, Volume 2 strength Design of one to for story buildings,
Prentice-Hall. Inc., Englewond Cliffs. ;.Je .... Je(!ie)'. 19&1.
Englekirk, R. E., "Concepts for the Development of Earthquake Resistant Ductile Frames of Precast concrete", Proceedings, US/Japan
Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan 29·31. 1986.pp. 171- 190.
Englekirk, R., and Beres, A., "The Need to Develop Shear Ductility in Prestressed Members," Concrete International, V. 16, No. 10,
October 1994, pp. 49-56.
Englekirk. E .'' towards more effective Use of Precast Concrete Cladding," proceedings architectural precast Concrete cladding- its
contribution to lateral resistance of Buildings. Precast/Presrressed Concrete Institute, Chicago, IL,I990.pp.4- 13.
Fajfar, P., and Krawinkler, H. (Editors), ―Seismic Design Methodologies for the Next Generation of Building Codes,‖ Proceedings of an
International Conference at Bled, Slovenia,A. A. Balkema, Rotterdam/Brookfield, 1997, 411 pp.
Fajfar, P., and Krawinkler, H., ―Performance-Based Seismic Design Concepts and Implementation,‖ Proceedings of the International
Workshop, Bled, Slovenia, June 28-July 1, 2004, Pacific Earthquake Engineering Research Center (PEER) Report, 2004.
Farrow, K. T., "Dynamic Response of Perimeter Lateral-System Structures with Flexible Diaphragms," Master's Thesis, Department of
Civil Engineering and Geological Sciences, University of Notre Dame, Notre Dame, IN, December 2000.
Farrow, K., and Kurama, Y., ―Capacity-Demand Index Relationships for Performance-Based Seismic Design,‖ Structural Engineering
Research Report #NDSE-01-02, Department of Civil Engineering and Geological Sciences, University of Notre
Farrow, K., and Kurama, Y., ―SDOF Demand Index Relationships for Performance-Based Seismic Design,‖ Earthquake Spectra,
Earthquake Engineering Research Institute, Berkeley, CA, V.19, No. 4, November 2003, pp. 799-838.
Federation Internationale de la Precontrainte. Precast Hollow-Core Floors, Thomas Telford . London.1988,31 pp.
FIB (1994): Planning and Design Handbook on Precast Building Structures, SETO Ltd, London, England, 1994, 138 pp.
Fintel, Mark, "Shear Walls - An Answer for Seismic Resistance?" Concrete International, V. 13, No.7, July 1991, pp. 48-53.
Fintel, Mark, and Ghosh, S. K., "Application of Inelastic Response History Analysis in the seismic Design of a 31-Story Frame Wall
Building, "Earthquake Engineering and Structural Dynamics, V. 9, No.8, November- December 1981, pp. 543-556 (PCA Publication
RP256.01D).
Fintel, Mark, and Ghosh, S. K., "Inelastic Aseismic Design of a Reinforced Concrete Coupled Wall Structure," Journal of Civil
Engineering Design, V. 2, No.1, 1980, pp. 45-61.
FIP Recommendations, "Design of Multistory Precast Concrete Struc·46 lUres, Thomas Telford, London, United Kingdom, 1987.
FIP Recommendations. "Precast Prestressed Hollow Cored Floors." FIP Commission on Prefabr ication. Thomas Telford. London.
United Kingdom, 1987.
French, C. W . Hafner, M., and Jayashankar. V ." connection between precast elements Failure Within Connection Region," Journal
Engineering. American Society of Civil Engineers. 115.No. 12. December 1989, pp. 3171-3 192.
French. C. W .. Olanrewaju, A .. and Charbe T . "Connections Between Precast Elements - Failure Outside Connection Region." ASCE
Journal of Structural Engineering. V. 115. No.2. February 1989, pp. 316-340.
Galusha, J. G.; 999. Precast, Post-tensioned Concrete Walls Designed to Rock. MSCE Thesis, University of Washington, Seattle, W A,
103p.
Gates, W. E., "Seismic Design Considerations for Untopped Precast Concrete Floor and Roof Diaphragms," Proceedings, Workshop on
Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, Washington, DC, 1981.
Ghali, R Favre and M Elbadry. Concrete Structures, Stresses and deformation.
Guide for Design and Prefabrication of Precast Reinforced Concrete Structures," Japanese Association. 198ft
Guidelines for the Use of Structural Precast Concrete in Buildings,‖ Report of a Study Group of the New Zealand Concrete Society and
the New Zealand National Society for Earthquake Engineering, Centre for Advanced Engineering, University of Canterbury, New
Zealand, First Edition, August 1991, 174 pp., and Second Edition, December 1999, 143 pp.
Herlihy, M. D., and Park, R., ―Detailing Precast Flooring Systems to Survive Loss of Support,‖ Proceedings of the Annual Technical
Conference of the New Zealand Concrete Society, October 1996, pp. 130-139.
Hicks, T. R., "Connections Between Precast Concrete Members for Use in Seismic Zones," Thesis submitted to the University of
Washington in partial fulfillment for the MSCE degree, 1990. .
Holden, T., Restrepo, J., and Mander, J., ―A Comparison of the Seismic Performance of Precast Wall Construction: Emulationand
Hybrid Approaches,‖ Rep. No. 2001-4, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand, 2001.
Holden, T., Restrepo, J., and Mander, J., ―Seismic Performance of Precast Reinforced and Prestressed Concrete Walls,‖ Journal of
Structural Engineering, ASCE, V. 129, No. 3, March 2003, pp. 286-296.
International Conference of Building Officials. Code Central - Earthquake Spectral Acceleration Maps, prepared in conjunction with U.S.
Geological Survey; Building Seismic Safety Council; Federal Emergency Management Agency; and E.V. Leyendecker, A.D. Frankel,
and K.S. Rukstales. Whittier, CA (CD-ROM).
Jacelues. and Aswad, A " Seismic Design of Panel Systems Using Vertical Post Tensioning," , Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan October 29031,
Jayashankar. V .. and French. C. E., ··An Interior Moment Resistant Connection Between Precast Elements Subjected to Cyclic Lateral
Loads:' Structural Engineering Report No. 87·/0. University of Minnesota. Minneapolis. MN, May 1988.
Johal, L.S., and Hanson, N.W. November 1978. Horizontal Joint Tests, Supplemental Report B on the Design and Construction of Large
Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Ju, SH, and Lin, MC. 1999, ―Comparison of Building Analyses Assuming Rigid or Flexible Floors,‖ ASCE Journal of Structural
Engineering V.125 No.25.
Kanaan. A. E., and Powell. G. H .."DRAIN-2D: A General Purpose Computer Program for Dynamic Analysis of Inelastic Plane
Structures:' Earthquake Engineering Research Center. EERC 73-6. 73-22. University of California, Berkeley, CA, 1973.
Kashiwazaki, T., and H. Noguchi. 2000.Structural Performances of Prestressed Concrete Interior Beam-Column Joints In Proceedings
of the 12th World Conference on Earthquake Engineering (12WCEE), Auckland, New Zealand, January 30–February 4, 2000, Paper
No. 2342.
Kianoush, M. R . and Scanlon. A . "Analytical Modeling of Large Panel Coupled Walls for Seismic Loading," Canadian loumaf of eMf
Engineering, V. IS, 1988, pp. 623-632.
Kitayama, K ., Otani, S., and Aoyama, H., "Development of Design Criteria for RC Interior Beam-Column Joints:' Design of Beam-
Column Joints for Seismic Resistance. ACI Special Publication SP-123, American Concrete Institute, Detroit, MI. 199 1, pp. 97-123.
Kripanarayanan, K.M., and Fintel, M. August 1976. Wall Panels: Analysis and Design Criteria, Report NO.3 on the Design and
Construction of Large Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M. ―Analytical Modeling and Lateral Load Behavior of Unbonded Post-
Tensioned Precast Concrete Walls,‖ Research Report No.EQ-96-02, Department of Civil and Environmental Engineering, Lehigh
University ,Bethlehem, PA, 1996, 191 pp.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M."Seismic Design and Response Evaluation of Unbonded Post-Tensioned
Precast Concrete Walls, PRESSS Report No. 98/03. Bethlahem, PA: Lehigh University.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M., "Seismic Design and Response Evaluation of Unbonded Post
Tensioned Precast Concrete Walls," Research Report No. EQ-97-01, Department of Civil and Environmental Engineering, Lehigh
University, Bethlehem, PA, November 1997, 184 pp.
Kusumo. Rllhardjo. F. L. "Behavior and Design of Connectors for Precast Double-Tee Members." M.S. Independent Study Report,
University of Wisconsin, Madison. WI. May 1996.
LATERALJ Version 2. 10, Static Lateral Analysis is Program for Wind and Seismic Loading, Jacques & Aswad, Inc .• Denver.CO. 1993.
Lee, H.J., and Kuchma, D.A., 2007, ―Seismic Overstrength of Shear Walls in Parking Structures with Flexible Diaphragms,‖ Journal of
Earthquake Engineering, V.11, No.1 Jan., pp. 86-109.
Lee, H.J., Aschheim, M.A., and Kuchma, D., 2008, ―Interstory Drift Estimates for Low-Rise Flexible Diaphragm Structures,‖ Engineering
Structures (In Press.
Lee, H.J., Kuchma, D.A., and Aschheim, M.A.,2008, ―Strength–Based Design of Flexible Diaphragms in Low-Rise Structures Subject to
Earthquake Loading,‖ Engineering Structures (In Press).
Libby, J. R., Modern Prestressed Concrete: Design Principles and Construction Methods, 4th ed., Van Nostrand Reinhold, New York,
1990.
Lin, C. M., and Restrepo, J., ―Seismic Behavior and Design of Reinforced Concrete Interior Beam-Column Joints,‖ Bulletin of the New
Zealand Society for Earthquake Engineering, V. 35, No. 2, June 2002, pp. 108-128.
Lin, J. I. Restrepo, and R. Park, ―An Alternative Design Method for Interior Beam-Column Joints of Reinforced Concrete Moment
Resisting Frames,‖ NZNSEE Conference, Wairakes, Taupo, New Zealand, March 1997.
Low. S-G. Buo, X . Einca. A., Tadros. M. K .• and Salmon, D. C., " Inelastic Dynamic Analysis of a Precast Concrete Office Building
Subjected to Moderate Seismicity:' Proceedings. Sevcnth Canadian Conference on Earthquake Engineering. M on tr~a l. Qu~b
ec,Canada, June 1995, pp. SO I-508.
MacRae, O. A., and Priestley, M. J. N., " Precast Post ·Tensioned Un grouted Concrete Beam Column Subassemblage Tests,"
Structural Systems Research Report No. SSRP 9411 0, University of California at San Diego, La Jolla, CA, March 1988,124 pp.
Maison. B. F . "PC-ANSR: A Computer Program for Non-Linear Structural Analysis." University of California. Berkeley. CA. 1992.
Mander, J., Priestley, M., and Park, R., "Theoretical Stress Strain Model for Confined Concrete," Journal of Structural Engineering,
American Society of Civil Engineers, V. 114, No.8, August 1988, pp. 1804-1826.
Mander, J., Priestley, M., and Park, R., ―Observed Stress-Strain Behavior of Confined Concrete,‖ Journal of Structural Engineering, V.
114, No. 8, August 1988, pp. 1827-1849.
Maund. T. J., "Seismic Behavior of Diaphragms in Parking Garages." Thesis submitted in partial ful61lment of the requirements fCX' the
MSCE degree. Department of Civil Engineering, University of Washington. Seattle. WA. 1995.
Moehle, J. P. 1992. Displacement-Based Design of RC Structures Subjected to Earthquakes. Earthquake Spectra, V. 8, No. 3: pp.
403–428.
Mole, A .. "Seismic Response of Hybrid Connections in Precast Concrete Frames," MSCE Thesis, University of Washington, Seattle,
WA, 1994, 147 pp.
Mueller P., "Behavioral Characteristics of Precast Wall s:' Proceedings of a Workshop on Design of Prefabricated Concrete Buildings
for Earthquake Loading, Applied Technology Council. April 198 1, pp. 277·308.
Mueller, P., "Experimental Investigation on the Seismic Performance of Precast Walls," Ninth World Conference on Earthquake
Engineering, Tokyo-Kyoto, Japan, V. IV, 1988, pp. 755-760.
Mueller, P., and Becker, J.M. October 1979. Seismic Response of Large Panel Precast Concrete Buildings, Advanced Design Concepts
Seminar, PCI Convention, Dallas, TX.
Mueller. P., "Hysteretic Behavior of Precast Panel Walls," , Proceedings, US/Japan Seminar on Precast Concrete Construction in
Seismic zones Tokyo, Japan October 29-31, 1986.
Murphy, G . Advanced Mechanics of Materials, McGraw-Hili Book: Company, Inc., New York:, NY, 1946.
Naeim, Farzad, The Seismic Design Handbook, 200 Ed., Kluwer Academic Publishers, Boston, 2001, p.376.
Naito, C., and Cao, L., ―Precast Diaphragm Panel Joint Connector Performance,‖ Paper 2722, Proceedings, 13th World Conference on
Earthquake Engineering, Vancouver, Canada, August 2004.
Naito, C., Peter, W., and Cao, L., 2006, ― Development of a Seismic Design Methodology for Precast Diaphragms, Phase 1 Summary
Report‖, ATLSS Report No. 06-03, Lehigh University, Bethlehem, PA, Jan.
Naito, C., R. Ren, C. Jones, and T. Cullen. 2007. PCI/ NSF Development of a Design Methodology for Precast Concrete Diaphragms:
Connector Performance Phase 1B. ATLSS report 07-04, Lehigh University, Bethlehem, PA.
Nakaki, S. D., "Design Guidelines for Precast and Cast-inPlace Concrete Diaphragms," Technical Report, EERI Professional
Fellowship, Earthquake Engineering Research Institute, Berkeley, CA, April 2000.
Nakaki, S. D., "Design Guidelines for Precast and Cast-in-Place Concrete Diaphragms," The 1998 NEHRP Professional Fellowship
Report, Earthquake Engineering Research Institute, Berkeley, CA, 1998.
Nawy, Fundamentals of High Performance Concrete, 2nd Edition. JohnWiley &Sons, New York, 2001.
New Zealand Concrete Society and New Zealand Society for Earthquake Engineering. 1999. Guidelines for the Use of Structral Precast
Concrete in Buildings, 2nd Edition. Christchurch, New Zealand: University of Canterbury.
Nishiyama, M., F. Watanabe, and H. Muguruma. 1991. Seismic Performance of Prestressed Concrete Beam-Column Joint
Assemblages. In Proceedings of the Pacific Conference on Earthquake Engineering, New Zealand, 20–23 November 1991, pp.
217–228.
Nishiyama, M., F. Watanabe, and H. Muguruma. 1994. Which Should Be Adopted as a Building System in Seismic
Regions—Prestressed Concrete or Reinforced Concrete? In FIP ‘94 XII Congress: May 29–June 2, Washington D.C., V. 1, pp.
E28–E39.
Nonlinear Mechanics of Reinforced Concrete By K. Maekawa
O‘Grady, C. R., ―Precast Cruciform Columns, H-Frames and Precast Concrete Shear Walls in Building Construction,‖ Proceedings of
the Pacific Concrete Conference, V.‑1, Auckland, New Zealand, November 1988, pp. 345-354.
O‘Leary, A. J., Monastra, D. P., and Mason, J. E., ―A Precast Concrete Moment Resisting Framing System,‖ Proceedings of the Pacific
Concrete Conference, V. 1, Auckland, New Zealand, November 1988, pp. 287-298.
Oliva, M. G., "Testing of the lVI Flange Connector for Precast Concrete Double-Tee Systems," Structures and Materials Test Lab
Report, University of Wisconsin-Madison, Madison, WI, lune 2000 [www.jvi-inc.com].
Oliva, M. G., ―Pilot Testing of JVI V-2 Flange Connectors for Precast Concrete Double-Tee Systems,‖ Structural and Materials Test
Laboratory Report, University of Wisconsin, Madison, WI, June 2002, 12 pp.
Oliva, M. G., ―Testing of the Shear-Loc Flange Connector for Precast Double- Tee Systems,‖ Structural and Materials Test Laboratory
Report, University of Wisconsin, Madison, WI, May 1999, 26 pp.
Oliva, M. G., ―Tests on Tindall Bent Plate Flange Connector,‖ Structures and Materials Test Laboratory Report, University of Wisconsin,
Madison, WI, June 1997, 7 pp.
Paulay .(1999). ―A Simple Seismic Design Strategy Based on Displacement and Ductility Compatibility‖, Earthquake Engineering and
Engineering Seismology, Vol.1 No.1
Paulay, ―The Design of Ductile Reinforced Concrete StructuralWalls for Earthquake Resistance,‖ Earthquake Spectra, Vol. 2, No. 4,
1986.
Paulay, T., and Bull , I. N .. "Shear Effect on Plastic Hinges of Earthquake Resisting Reinforced Concrete Frames," Bulletin D'
information 132.Comite Euro-International du Beton,1979, pp. 165- 172
Paulay, T., and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, New York,
NY, 1992.
Paulay. T . and Binney. 1. R . "Diagonally Reinforced Coupling Beams of Shear Wall!> - Shear in Reinforced Concrete," Special
Publication 42. American Concrete Institute. Farmington Hills. MI. 1974. pp . 579-599.
Paulay. T . and Santhankumar. A. R .Ductile Behavior of Coupled Shear Walls:' Journal of the Structural Division. American Society of
Civil Engineers. V. 102. 1976. pp. 93-108.
PCI, Request for Proposal (RFP), ―Development of a Design Methodology for Precast Diaphragms,‖ Precast/Prestressed Concrete
Institute, Chicago, IL, October 2002.
Perez, F. J., ―Lateral Load Behavior and Design of Unbonded Post-Tensioned Precast Concrete Walls with Ductile Vertical Joint
Connectors,‖ M.S. Thesis, Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, December 1998, 201
pp.
Perez, F. J., Pessiki, S., and Sause, R. May 2004. Experimental and Analytical Lateral Load Response of Unbonded Post-Tensioned
Precast Concrete Walls, ATLSS Report No. 04-11. Bethlehem, PA: Lehigh University.
Perez, F. J., Pessiki, S., and Sause, R., ―Lateral Load Behavior and Design of Unbonded Post-Tensioned Precast Concrete Walls with
Ductile Vertical Joint Connectors,‖ Center for Advanced Technology for Large Structural Systems (ATLSS) Report No. 99-01, Lehigh
University, Bethlehem, PA, January 1999, 127 pp.
Perez, F. J., Pessiki, S., Sause, R., and Lu, L.-W., ―Lateral Load Tests of Unbonded Post-Tensioned Precast Concrete Walls,‖ SP-211-
8, American Concrete Institute, Farmington Hills, MI, 2003, pp. 161-182.
Planning and Design of a Precast Bearing Wall Building. October 1983. Preprints for PCI Seminar. Chicago, IL: Prestressed Concrete
Institute.
Popoff, Alexander, Jr. 1993. What Do We Need To Know About the Behavior of Structural Concrete Shear Wall Structures, Response
of Multistory Concrete Structures to Lateral Forces, SP-36. Detroit, MI: American Concrete Institute.
Powell, ―DRAIN-2DX, Element Description and User Guide for Element Type 01, Type 02, Type 04, Type 06, Type 09, and Type 15,‖
Version 1-10, Report No. UCB/SEMM-93/18, Department of Civil Engineering, University of California at Berkeley,Berkeley, California,
December 1993.
Qi, X., and Moehle, J., ―Displacement Design Approach for Reinforced Concrete Structures Subjected to Earthquakes, ‖Report No.
EERC 91/02, Earthquake Engineering Research Center, University of California, Berkeley, CA, 1991.
Ragupathy. R., "Semi-Rigid Connections in Precast Concrete Frames," Ph.D. Thesis. City University, Northampton Square, London,
United Kingdom, 1993.
Rahman, A., and Restrepo, J., ―Earthquake Resistant Precast Concrete Buildings: Seismic Performance of Cantilever Walls
Prestressed Using Unbonded Tendons,‖ Report No. 2000-5, Department of Civil Engineering, University of Canterbury, Christchurch,
New Zealand, 2000.
Raymond, W., ―Efficient Use of Structural Precast Concrete in High Rise Buildings – A Case Study,‖ Transactions of the Institution of
Professional Engineers New Zealand, V. 19, No.1/CE, November 1992, pp. 21-27.
Restrepo, J. and Schoettler, M., ―DSDM Report on Ground Motions,‖ https://central.nees.org/
Restrepo, J. Crisafulli, F., and Park, R., ―Earthquake Resistance of Structures: The Design and Construction of Tilt-Up Reinforced
Concrete Buildings,‖ Research Report 96-11,Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand,
September 1996.
Restrepo, J. Crisafulli. F. 1. and Park. R., . Earthquake Resistance of Structures: The Design and Construction of Tilt Up Reinforced
Concrete Buildings," Research Report 96-11.Department of Civil Engineering, University of Canterbury. Christchurch, New Zealand,
\996.
Restrepo, J. Park, R., and Buchanan, A. H., "The Seismic Behavior of Connections Between Precast Concrete Elements," Research
Report No. 93-1Department of Civil Engineering. University of Canterbury, Christchurch ,New Zealand, April 1993.
Restrepo, J. Park. R., and Buchanan. A. H .. "The Seismic Behavior of Connections Between Precast Concrete EIements_" Research
Report No. 93/3.Department of Civil Engineering. University of Canterbury. Christchurch. New Zealand. 1993.
Restrepo, J.―Self-Centering Precast Post-Tensioned Cantilever Walls—Theory and Experimental Work,‖ ASCE Structures Congress,
Seattle, WA, May 29-31, 2003.
Restrepo, J.and A. Rahman. 2007. Seismic Performance of Self-Centering Structural Walls Incorporating Energy Dissipators. Journal of
Structural Engineering, V. 133, No. 11 (November): pp. 1560–1570.
Restrepo, J.and Park. R., "Review of Tilt Up Construction Details," Proceedings. Annual Technical Conference of New Zealand
Concrete Society, Auckland, New Zealand, October 1993, pp. 38-43
RISA-2D Version 3.0, Rapid Interactive Structural Analysis in 2-Dimensions. RISA Technologies. Lake Forest, CA.1992.
Rubenstein and W. C. Hurty, Dynamics of Structures. Prentice Hall, Englewood Cliffs, New Jersey, 1964.
S. Stanton. J. F .. and Nakaki. S. D .. ··PRESSS Industry Seismic Work-shops:' PRESSS Research Repon 9112, University of
California al San Diego. San Diego. CA. 1991.
S.(sri) Sriharan, M.J.Nigel Priestley, Frieder Seible and Akira Igarachi (12 WCEE 2000). A five-storey Precast concrete test building for
seismic conditions and overview
Salmon, C. G., and Johnson, J. E., Steel Structures Design and Behavior, Fourth Edition, Harper Collins College Publishers
Schricker. V . and Powell, G. H., "Inelastic Seismic Analysis of Large Panel Buildings," Report No .UCBIEERC/80/38, College of
Engineering, University of California a, Berkeley. CA, 1980.
Schultz, A. E .. and Magana, R. A .. "Seismic Behavior of Connections in Precast Concrete Walls," Paper No. SPI62+12, Mete A. Sozen
Sympo-sium, ACI SP 162. American Concrete Institute, Fannington Hills, Ml. 1996, pp. 273·31 I.
Schultz, A. E., Tadros. M. K. Huo. X. and Magana. R. "Seismic Resistance of Vertical Joints in Precast Shear Wall Panels,"
Proceedings of the FIP 1994 XII Congress. Washing-ton, D.C. May-June 1994. 17 pp.
Schultz, D.M. March 1979. Design Methodology, Report NO.6 on the Design and Construction of Large Panel Concrete Structures.
Skokie, IL: Portland Cement Association.
Schultz, D.M., and Fintel, M. April 1975. Loading Conditions, Report NO.1 on the Design and Construction of Large- Panel Concrete
Structures. Skokie, IL: Portland Cement Association.
Schultz, D.M., Burnett, Eric F. P., and Fintel, Mark. October 1977. Design and Construction of Large-Panel Concrete Structures Report
4: A Design Approach to General Structural Integrity. Skokie, IL: Portland Cement Association.
Schultz, D.M., Johal, L.S. January 1979. Derecho, A.T., and Iqbal, M. Special Topics, Report No.5 on the Design and Construction of
Large-Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Schultz.. A. E .. Magana. R. A .. Tadros.M. K .and Huo. X .. "Experimental Study of Joint Connections in Precast Concrete Walls,"
Proceedings. Fifth U.S. National Conference on Earthquake Engineering. Chicago. IL. July10-14. 1994.
Scoggin, H. L., and Pfeiffer, D. W., ―Cast-in-Place Concrete Residences with Insulated Walls-Influence of Shear Connectors on Flexural
Resistance,‖ Journal of the PCA Research and Development Laboratories, V. 9, No. 2, 1967, pp. 2-7.
Seible. F., Priestley. M. 1. N .. Kurkchubasche. A .. and Kingsley. G. R . "Seismic Response of 5-Story Full-Scale Reinforced Masonry
Building. Pan 11." Journal of the Structural Division. ASCE. V. 120. No.3, March 1994. pp. 925-946.
Seminar on Precast Concrete Construction in Seismic Zones." Japan Society for the Promotion of Science/National Science
Foundation. Volumes 1. \-1. 2. Tokyo. Japan. October 29·31. 1986.
Sezen, H., and A. S. Whittaker. 2006. Seismic Performance of Industrial Facilities Affected by the1999 Turkey Earthquake. Journal of
Performance of Constructed Facilities, V. 20, No. 1: pp. 28–36.
Shaikh, A. F., and Feile, E. P., ―Report on the Results of Laboratory Testing of JVI Vector Connector for Precast Double-Tee Members,‖
University of Wisconsin-Milwaukee, Milwaukee, WI, 2002.
SLanton. J. F., MacRae, G .. Sugata, M .. and Day, S., ·'Preliminary Test Report of a Hybrid Frame Exterior Beam Column Specimen
Test," University of Washington, Seattle, WA, March 1999.
Suc na.ga. Y., "Design Guideline for Precast Concrete structures in Japan, Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, October 29-3 1, 1986,pp. I-20.
Svensson, S., "Diaphragm Action in Precast Hollow-Core Floors," The Nordic Concrete Federation. Nordic Concrete Research.
Publication No. 4, 1985, pp. 179-19 1.
SWANSA Computer Program, Department of Civil Engineering, City University. Nonhampton Square, London, United Kingdom.
Tadros, M. K .. Einea, A .. Low, S-G ..and Huo. X., "PRESSS - Behavior of a Six-Story Office Building Under Moderate Seismicity." Final
report submitted to the National Science Foundation. July 1995, 148 pp.
Tadros, Magana, and Schultz, A. E. 1966. "Design and Behavior of Connections in Precast Concrete Shear Walls," Paper No. 1738,
Proceedings. Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico: Elsevier Science Ltd.
Tadros. M. K., Schu h z. A. E .. and Magana. R. A .. "Behavior of a Six ·Story Office Building Under Moderate Seismicity," Third Meeting
of the U.S,.Japan Joint Technical Coordinating Committee on Precast Seismic Structural Systems (lTCC-PRESSS),San Diego. CA.
November 1992,49 pp.
Takeda t "Design and Construction of High rise precast Concrete structures in Japan" Abstract of special Lecture Among Pre-Seminar
Lectures on Precast Construction in Seismic Zones. Japan Concrete Institute, Tokyo, Japan, October 28, 1986, pp.
Takeda, T., SOl.en, M .. and Niclsen, N . "Reinforced Concrete Response to Simulated Earthquakes:' JOllmol SlruClures Divi-sion.
ASCE. v. 96. No. 12, December 1970.
The Seismic Design Handbook By Farzad Naeim
The Structural Design of Tall Buildings, Vol. 1, 57-72: John Wiley & Sons, 1972.
Thomas, D. J. 2003. Analysis and Validation of a Seismic Design Method Proposed for Precast Jointed Wall Systems. Master Thesis,
Iowa State University, Ames, Iowa.
Thomas, D. J., and Sritharan, S. June 2004. An Evaluation of Seismic Design Guidelines r:for Precast Jointed Wall Systems, ISU-ERI-
Ames Report ERI-04643. Ames, IA: Iowa State University.
Thompson, K. J., and Park, R., "Ductility of Concrete Frames Under Seismic Loading," Department of Civil Engineering Report 75-14,
University of Canterbury, New Zealand, October 1975.
Thomsen, IV and J. W. Wallace, ―Displacement-Based Design of RC Structural Walls: Experimental Studies ofWalls with Rectangular
and T-Shaped Cross Sections,‖ Report No. CU/CEE-95-06, Department of Civil and Environmental Engineering, Clarkson University,
Potsdam, New York, 1995.
Timoshenko, S. P., and J. N. Goodier. 1970. Theory of Elasticity. 3rd ed. New York, NY: McGraw-Hill.
Timoshenko, S., and Young. 1968. D.H. Elements of Strength of Materials. New York: Van Nostrand Reinhold Company, pp. 125-137.
u.TERAL3 Vmion 2.10, Static Laterul Analysis Program for Wind and Seismic Loading, Jacques & Aswad, Inc . Denver, CO, 11}}3.
United States Geological Survey. Event 14366244. pasadena.wr.usgs.gov/shake/ca/STORE/X14366244/ ciim_display.html.
V. Ciampi, R. Eligenhausen, V. Bertero, and E. Popov, ―Analytical Model for Concrete Anchorages of Reinforced Bars Under
Generalized Excitations,‖ EERC Report No.UCA/eerc 82/83, University of California, Berkeley, November 1982.
Virdi. K .. and Ragupathy. R., "Analysis of Precast Concrete Frames with Semi- Rigid Joints," Proceedings of the First State of the An
Workshop, COST C I. Slrasbourg. France. 1992, pp. 296-307.
Wallace and J. H. Thomsen, IV, ―Seismic Design of RC Structural Walls. Part II: Applications,‖ Journal of Structural Engineering, ASCE,
Vol. 121, No. 1, January 1995.
Wallace, ―Ductility and Detailing Requirements of Bearing Wall Buildings, Journal of Structural Engineering, ASCE, Vol. 118, No. 6,
June 1992.
Wallace, J., ‖BIAX User Manual―A Computer Program for the Analysis of Reinforced Concrete Sections,‗ University of California at
Berkeley, Berkeley, CA, 1989
Wang. C. K . Intermediate Structural Analysis. Chapter 20. McGraw-Hill.1983..
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests,‖ Report No. TR-97/10,
University of California, San Diego, July 1997.
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests,‖ Report No. TR-98/01,
University of California, San Diego, January 1998.
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests—Series 3,‖ Report No. TR-
98/12, University of California, San Diego, July 1998.
Wiss, Janney and Elstner, "Cyclic and Monotonic Shear Tests on Connections Between Precast Concrete Panels," Report No. WJE
77578, for Prof. 1. Becker, MIT, July 1981.
Yu. C . "Seismic Design of Precast Coupled Walls." M.S . Thesis, Department of Civil Engineering, Pennsylvania State University. 1992.
134 pp.
Zheng, W., ―Analytical Method for Assessment of Seismic Shear Capacity Demand for Untopped Precast Double- Tee Diaphragms
Joined by Mechanical Connectors,‖ Ph.D. Thesis, The University of Wisconsin, Madison, WI, 2001, 313 pp.
Abdel-Fattah. B. A .. and Wight. J. K., "Study of Moving Beam Plastic Hinging Zones for Earthquake-Resistanl Design of RiC Buildings:'
ACI Structural Journal, V. 84. No. I. January February 1987. pp. 31-39.
Abdul-Wahab, H. M. S., ―Ultimate Shear Strength of Vertical Joints in Panel Structures,‖ ACI Structural Journal, V. 88, No. 2, March-
April 1991, pp. 204-213.
ACI Innovation Task Group 1 and Collaborators, ―Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members (ACI T1.2-XX) and Commentary (T1.2R-XX),‖ ACI Structural Journal, V. 98, No. 5, September-October
2001, pp. 771-784.
ACI-ASCE Committee 550. "Design Recommendations for Precast Concrete Structures," ACI Structural Journal, V. 90. No. I. January-
February 1993. pp. 115·12 1.
AI-Haddad. M. S .. and Wight. J. K ."Relocating Beam Plastic Hinging Zones for Earthquake Resistant Design of Reinforced Concrete
Buildings." ACI Structural Journal. Proceedings. V. 85. No.2. March-April 1988. pp. 123- 133,
Cheok, G., Stone, W., Kunnath, S., ―Seismic Response of Precast Concrete Frames with Hybrid Connections,‖ ACI Structural Journal,
V. 95, No. 5, September-October 1998, pp. 527-539.
Galano L. and A. Vignoli, ―Seismic Behavior of Short Coupling Beams with Different Reinforcement Layouts,‖ ACI Structural Journal,
November-December 2000, pp. 876– 885.
Hawkins. N. M . Lin, I. and Ueda. T ."Anchorage of Reinforcing Bars for Seismic Forces." ACI Structural Journal ,V. 84, NO.5,
September-October 1987, pp. 407-4 18.
Kato, D., Kabeyasawa, T., Otani, S., and Aoyama, H., ―Earthquake-Resistant Design of Shear walls with One Opening,‖ ACI Structural
Journal, V. 92, No. 4, July-August 1995, pp. 495-500.
kin. M .. and Fu. H. C .. "Beam-Column Connections in Precast Reinforced Concrete Construct ion." ACI Structural Journal. V. 87. No.3.
May June 1990. pp. 252-261.
Kurama, Y., "Simplified Seismic Design Approach for Friction- Damped Unbonded Post-Tensioned Precast Concrete Walls," ACI
Structural Journal, V. 98, No.5, September-October 2001, pp. 705-716.
Kurama, Y., ―Seismic Design of Unbonded Post‑Tensioned Precast Walls with Supplemental Viscous Damping,‖ ACI Structural Journal,
V. 97, No. 4, July-August 2000, pp. 648-658.
Kurama, Y., Sause, R., Pessiki, S., and Lu, L. W., "Lateral Load Behavior and Seismic Design of Unbonded Post-Tensioned Precast
Concrete Walls," ACI Structural Journal, V. 96, No.4, July-August 1999, pp. 622-632.
Kurama, Y., Sause, R., Pessiki, S., and Lu, L.-W., ―Seismic Response Evaluation of Unbonded Post-Tensioned Precast Walls,‖ ACI
Structural Journal, V. 99, No. 5, September-October 2002, pp. 641-651.
Lemieux, K., Sexsmith, R., and Weiler, G., ―Behavior of Embedded Steel Connectors in Concrete Tilt-Up Panels,‖ ACI Structural
Journal, V. 95, No. 4, July-August 1998, pp. 400-413.
Mast, R. F .. "Unified Provisions for Reinforced and Prestressed Concrete Aellural and Compression Members," ACI Structural Journal.
V. 89, No.2, March-April 1992. pp. 185-199.
Osanai, Y., Watanabe, F., and Okamoto, S., ―Stress Transfer Mechanism of Socket Base Connections with Precast Concrete Columns,‖
ACI Structural Journal, V. 93, No. 3, May-June 1996, pp. 266-276.
Paulay, T. 1989. Equilibrium Criteria for Reinforced Concrete Beam-Column Joints. ACI Structural Journal, V. 86, No. 6
(November–December): pp.635–643.
Secki n. M .. an d Fu. H-C.. "Beam Column Connections in Precast Reinforced Concrete Construction," ACI Structural Journal. V. 87.
No.3.May-June 1990, pp. 252-261 and discussions. V. 88. No.2. March-April 199 1. pp. 240-241.
Sittipunt, c., and Wood, S., "Influence of Web Reinforcement on the Cyclic Response of Structural Walls," ACI Structural Journal, V. 92,
No. 6, November-December 1995, pp. 745-756.
Stone, W., Cheok, G., and Stanton, 1., "Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections
Subjected to Cyclic Loading," ACI Structural Journal, V.91, No. 2, March-April 1995, pp. 229-249.
Taylor, C., Cote, P., and Wallace, J., ―Design of Slender Reinforced Concrete Walls with Openings,‖ ACI Structural Journal, V. 95, No.
4, July-August 1998, pp. 420-433.
Tsoukantas, S. G .. and Tassios, T. P .."Shear Resistance of Connections Between Reinforced Concrete Linear Precast Elements" ACI
Structural Journal. V. 86, No.3. May-June 1989.pp.242-249.
Zhang Y. and Z. Wang, ―Seismic Behavior of Reinforced Concrete Shear Walls Subjected to High Axial Loading,‖ ACI Structural
Journal, Vol. 97, No. 5, September– October 2000.
AIJ, ―AIJ Recommendations for the Design of Base Isolated Buildings,‖ Architectural Institute of Japan, Tokyo, Japan,1993.
Abdel. Maksoud. M. G . - Relationship Between Performance and Geometric and Mechanical Properties of Concrete Joints Subjected to
Cyclic Shear," Thesis submitted in partial fulfillment of the requirements for (he PhD degree. Department of Civil Engineering. University
of
ACI Committee 408, "Bond Stress The State of Art," ACl Journal. Proceedings, V. 63, No. II , November 1966, pp. 1161 -1190.
ACI Innovation Task Group 1 and Collaborators, "Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members (ACI TI.2-XX) and Commentary (TI.2R-XX) (draft)," Ac/ Structural Journal, V. 98, No. 5, September-
October 2001, pp. 771-784.
ACI Innovation Task Group 1 and Collaborators, ―Acceptance Criteria for Moment Frames Based on Structural Testing (ACIITG/T1.1-
01),‖ American Concrete Institute, Farmington Hills, MI, 2001.
ACI Innovation Task Group 1 and Collaborators, ―Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members,‖ ACI Proposed Standard T1.2-03 and Commentary ACI T1.2R-03, American Concrete Institute,
Farmington Hills, MI, 2003.
ACI Innovation Task Group 5 and Collaborators, ―Acceptance Criteria for Special Precast Structural Walls Based on Validation Testing
and Commentary,‖ Draft, ITG T5.1, American Concrete Institute, Farmington Hills, MI, 2004.
ACI Innovation Task Group I and Collaborators, "Acceptance Criteria for Moment Frames Based on Structural Testing (T1.l -01) and
Commentary (Tl.lR-O I)," American Concrete Institute, Farmington Hills, MI, 2001, 10 pp.
ACI innovation Task Group I and Collaborators, "Special Hybrid Moment Frames Composed of Discrete[y Jointed Precast and Post-
Tensioned Concrete Members (ACI Tl.2-03) and Commentary (ACI Tl.2R-03)," American Concrete Institute, Fannington Hills, MI, 2003.
Adajar, J. C., T. Kanakubo, M. Nonogami, N. Kayashima, Y. Sonobe, and M. Fusisawa. 2004. An Analysis of the Behavior of Hybrid
Steel Beam-RC Column Connection. Paper no. 2398 presented at the 13th World Conference on Earthquake Engineering, Vancouver,
B.C., Canada.
Adlparvar, M. Ro, "Torsional Behavior of Precast Concrete Beams and Connections," Ph.D. Thesis. Univcrsity of Nottingham, United
Kingdom, 1991.
AISC Special Task Committee on the Northridge Earthquake, "Assessing Steel Damage in the Northridge Earthquake ,"Modern Steel
Construe/ion,May pp. 14-18.
Alsiwat, J. M. and Saatciogu, M., ―Reinforcement anchorage slip under monotonic loading‖, Journal of Structural Engineering, V. 118,
No. 9, September 1992, pp. 2421-2438.
Anderson. A. R .• ''Composite Designs in Precast and Cast in Place Concrete." Progressire Architecture, September 1960, pp. 172- 179.
Aoyama, H., ―Earthquake Resistant Design of Reinforced Concrete Frame Buildings with Flexural Walls,‖ in Earthquake Resistance of
Reinforced Concrete Structures, A Volume Honoring Hiroyuki Aoyama, Editor: T. Okada, Department of Architecture, Faculty of
Engineering, University of Tokyo ,Tokyo, Japan, 1993, pp. 78-100.
Backler, A. P .• and Baylik. M ."Local Behavior of Shear Transfer and Compression Transfer Joints - The Behavior of Large Panel
Structures."CIRIA Report 45. London. England. 1973.
Barney. G. B . Shiu. K. N . Rabbal. B. G . Fiorato. A. E. Russell. H. G .and Corley, w. G . "Earthquake Resistant Structural Walls - Tests
of Coupling Beams." Report to National Science Foundation. Portland Cement Association. Skokie. lL. 1978. 58 pp.
Bathe, K. 1" Wilson, E. L . and Peterson. F. E . "A Structural Analysis Program for Static and Dynamic Response of Linear Systems"
SAPI V.Report No. EERC 73-1 I. University of CaHfornia. Berkeley. CA. 1973.
Baysal. M. Z .. " Behavior of an Exterior Precast Beam Column Connection Under Reversed Cyclic Loading:' M.S. Thesis. Department
of Civil Engineering. Middle East Technical University. Ankara. Turkey. 1991.
Bertero, V., ‖Lessons Learned From Recent Earthquakes and Research and Implications for Earthquake Resistant Design of Building
Structures in the United States,‗ Earthquake Spectra Journal, V. 2, No. 4, 1986, pp. 825-858.
Blades. P. S .. Jacks. D. H., and Beattie. G. 1.. " Investigation of the Influence of the End Support Condition on the Shear Strength of
Prestressed Voided Slabs (Oy-core)." Report 90-25115. Central Laboralories. Ministry of Works and Development. Lower Hutt . New
Zealand. 1990.
Blakeley, R. W. G., and Park, R., "Prestressed Concrete Sections with Cyclic Flexure," Journal of the Structural Division, ASCE, V. 99,
No. ST8, August 1973,pp.1717-1742.
Bonacci, John F., Collins, Michael P, Pantazopoulou,S. J., and Sheikh, SharminA. "The Participation of Architectural Precast Concrete
Cladding Panels in the Lateral-Load Resistance of Buildings-A DesignBrief." CPCI, 1995.
Booth, E.D., Kappos, A.J., Park, R., Moehle, J.P. and Hikone, S. Seismic design of concrete frame structures: A comparison of
Eurocode 8 with other international practice, Proceedings of the 6th Conference of the Society for Earthquake and Civil Engineering
Dynamics, Oxford, United Kingdom, March 1998, pp. 481-492.
Boresi, A. P., and Sidebottom, O. M., Advanced Mechanics of Materials, Fourth Edition, John Wiley & Sons, New York:,NY,1985.
Bresler, B., and Pister, K. S., "Strength of Concrete Under Combined Stresses," AC1 Journal, V. 55, No.3, September 1958, pp. 321-
345.
Brigginshaw. G., "A New Era for Structural Frames," Concrete (London), V. 21. No. 10, October 1987.
Buchanan, A. H., "Diagonal Beam Reinforcing for Ductile Frames," Bulletin of the New Zealand National Society for Earthquake
Engineering, V. 12, No.4, December 1979, pp. 346-356.
Bull, D. K., "Diaphragms," Seismic Design of Reinforced Concrete Structures, Technical Report No. 20, New Zealand Concrete Society,
1997.
CEB, Bulletin D information No 220 and No 210. Volume1: General models, volume 2 Frame Members. Behaviour and analyses of
reinforced concrete structuresunder alternate actions including inelastic response
CEB, May 1904. Behavior and analysis of reinforced concrete structures under alternated actions including inelastic response, volume 2.
Celik, 0., and Sritharan, S. January 2004. An Evaluation of Seismic Design Guidelines Proposed for Precast Concrete Hybrid Frame
Systems, ISU-ERI-Ames Report ERI-0442S. Ames, IA: Iowa State University.
Celik, O. 2004. Analysis and Validation of a Seismic Design Method Proposeo .or Pre.:.2.c-~;-iy~:\:icjsterns. Master Thesis, Iowa State
University, Ames, Iowa.
Centre for Advanced Engineering: Guidelines for the use of precast concrete in buildings. University of Canterbury, Christchurch, New
Zealand, 1st edition 1991, 2nd edition 1999, 144 pp.
Choi. C. K., and Bang. M. S . "Plate Element With Cutout for Perforated Shear Wall." Journal of Structural Engineer.ing. American
Society of Civil Engineers. V. 113. No.2. February 1987.
Cluugh. D. P., " A Seismic Design Methodology for Medium- Rise Precast Concrete buildings, Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan, October 29-31, 1986, pp.101-126.
Code of Practice for General Structural Design and Design Loadings for Buildings, NZS 4203:1992, Standards Association of New
Zealand, Wellington, New Zealand, 1992.
Code of Practice for the Design of Concrete Structures, NZS 3101: 1982.Standards Association of New Zealand. Wellington, New
Zealand, 1982.
Comair, F., and Dardare, 1.. "Model Testing of Precast Semi-Rigid Beam· to-Column Connection." COST C I Proceedings of First
Workshop, Semi Rigid Behavior of Civil Engineering Structural Connections. E.N.S.A. I.S., Strasbourg. France. 1992, pp. 99- 119.
Concrete Construction NZS 3109:1997, Standards Association of New Zealand, Wellington, New Zealand, 1997
Concrete Structures Standard, Standards Association of New Zealand, Wellington, New Zealand. 1995.
Construction Work of Deck Slab on the Shin-Tsubunmo Bridge," MlI.lsuda Construction Off'lCe, Tokyo First Construction Bureau, Japan
Highw.o.y Corpomtiorl,<k1oher,
Corley. W. G. (primary contributor). "Concrete Parking Structures:' Northridge Earthquake Reconnaissance Report. V. 2. Earthquake
Engineering Research Institute. EorthqUllk L S~c.tro. Supplement C to V. II. January 1996. pp. 75-98.
DeChefdebien. A .. and Dardare. J .."Experimental Investigations on Current Connections Between Precast Concrete Components.'"
COST C I Proceedings of Second Workshop, Semi Rigid Behavior of Civil Engineering Structural Connections. CTU Prague, Czech
Republic. 1994. pp. 21-30.
Design of Concrete Structures, NZS 3101:1995, Standards Association of New Zealand, Welling ton . New Zealand, I995.
Dodd, L. L. and and J. I. Restrepo-Posada. March 1995. Model for Predicting Cyclic Behavior of Reinforcing Steel. Journal of Structural
Engineering, ASCE, V. 121, NO.3: pp. 443-445.
Draft for Comment: Design of Concrete Structures, DZ 3101. Revision of NZS 310 I : 1982:' Standards New Zealand, Wellington, New
Zealand. 1993.
Eberhard, M. O. and Sozen, M. A., 1993, ―Behavior-Based Method to Determine Design Shear in Earthquake-Resistant Walls‖,
American Society of Civil Engineers, Journal of Structural Engineering, 119 (2), 619-640.
Edmund Booth, Richard Fenwick. Concrete structures in earthquake regions
EERI, "Northridge Earthquake of January 17, 1994 Reconnaissance Report, Volume 2," William T. Holmes and Peter Sommers
(Technical Editors), Earthquake Spectra, Earthquake Engineering Research Institute, Supplement C to Volume II , January 1996.
Eighth Annual Report to the National Science Foundation," Center for Advanced Technology for Large Structural Systems. Le high
University, Bethlehem, PA, March 1994.
EJigehausen, R., Popov, E. P., and Bertero .V. V., "Local Bond Stress-Slip Relationships of Deformed Bars Under Generalized
Excitation." Report UCBI EERC·83123. Earthquake Engineering Research Center. University of California. Berkeley, CA. 1983. 178 pp.
Elliott, K. S . Davies, G . and Gorgun. H .. "Effective Length Factors in Precast Concrete Frames," Semi-Rigid Structural Connections.
Proceedings of JABSE Colloquium. V. 75, Istanbul. turkey. 1996.pp. 349-
Elliott, K. S and Tovey, A., et aI., "The Use of Precast Concrete in Buildings - A Design Guide," British Cement Association, Wexham
Springs. Slough, United Kingdom. May 1992.
Elliott, K. S Davies. Goo and Ad lparvar, R. M., ''Torsiona l Behavior of Precast Concrete Edge Beams and Connections," Magazine of
Concrete Research, V. 45, No. 164. 1993, pp.157- 168.
Elliott, K. S Soo Dav ie G., and Gorgun , H . "The Determination of Moment Rotation in Semi-Rigid Precast Concrete Connections Using
the Component Method," COST CI Proceedings of Second Workshop. Semi-Rigid Behavior of Civi l Engineering Structural
Connections, CTV Praguc. Czech Republic, 1994. pp. 31-40.
Elliott, K. S, Davies, G., and Gorgun, H "Semi-Rigid Connections in Precast Concrete Frames," 1997 Federation Internationale de la
Preeontrainte Symposium, Johannesburg. South Africa, 1997, pp. 463-476.
Elliott, K. S. Davies. G .. and Mahdi.A., ''The Effect of Moment Rotation on the Stability of Columns in Precast Concrete Structures."
Current research at the University of NOl!ing' ham, United Kingdom..
Englehardt, M . D. , and Husain, A. S., "Cyclic loading performance of Welded flange - Bolted Web Connections," Journal of Structural
Engineering ,American Society of Civil Engineers, 119, No. 12, December 1993, pp. 3537-3550.
Engstrom. B .. "Tests on the Dynamic Behavior of Precast Floors at Sudden Removal of an Exterior Support."Nordic Concrete
Research. Publication NO.7. 1988.
Engstrom. B., "Ductility of Tie Connections for Concrete Components in Precast Structures."' Technical Report. Federation International
de la Precontraime. London. 1982.
Erasmus, L. A., "Cold Straightening of Partially Embedded Reinforcing Bars A Different View," Concrete International. V. 3, NO.6. 1981,
pp. 47-52.
Fajfar, P., and Fischinger, M., ―N2-A Method for Non-Linear Seismic Analysis of Regular Structures,‖ Ninth World Conference on
Earthquake Engineering, Tokyo, Japan, 1988.
Fargier-Gabaldon, L. B., and G. J. Parra-Montesinos.2006. Behavior of Reinforced Concrete Column-Steel Beam Roof Level T-
Connections under Displacement Reversals. Journal of Structural Engineering, V. 132,No. 7 (July): pp. 1041–1051.
Farrow, K., and Kurama, Y., "Ground Motion Scaling Methods for Different Structure Characteristics and Site Conditions," Enrthquake
Engineering and Structural Dynamics (submitted for publication, March 2002).
Farrow, K., and Kurama, Y., ―SDOF Displacement Ductility Demands Based on Smooth Ground Motion Response Spectra,‖
Engineering Structures, Elsevier, V. 26, No. 12, October 2004, pp. 1713-1733.
Fenwick, R. C. and Megget, L. M. 1993. Elongation and Load-Deflection Characteristics of Reinforced Concrete Members Containing
Plastic Hinges. Bulletin of the New Zealand National Society for Earthquake Engineering, 26(1), January: pp. 28-41.
Fenwick, R., and Davidson, B. S., ‖Elongation in Ductile Seismic-Resistant Reinforced Concrete Frames,‗ Proceedings, Tom Paulay
Symposium, Recent Developments in Lateral Force Transfer in Buildings, SP-157, American Concrete Institute, Detroit, MI, 1995, pp.
143-170.
Filiatrault, Elements of Earthquake Engineering and Structural Dynamics. Polytechnic International Press, Montreal, Canada, 1998.
Finlel, M., Schultz., D. M., and Iqbal, M. August 1976. Philosophy of Structural Response to Normal and Abnormal
fintel, Mark (Editor). 1974. Handbook of Concrete Engineering. New York: Van Nostrand Reinhold Company.
Fintel, Mark, "Behavior of Structures in the Caracas Earthquake," Civil Engineering, V. 38, No.2, February 1968, pp. 42-46.
Fintel, Mark, "Modern Concrete Structures Survive Romanian Earthquake," Civil Engineering, V. 48, No. 10, October 1978, pp. 80-81.
Fintel, Mark, "Quake Lesson From Managua: Revise Concrete Building Design?" Civil Engineering, V. 43,No.8, August 1973, pp. 60-63.
Fintel, Mark, and Ghosh, S. K., "The Structural Fuse: An Inelastic Approach to Seismic Design of Buildings, "Civil Engineering, V. 51,
No.1,January 1981, pp. 45-51.
FIP Guide to Good Practice. "Horizontal Composite Structures." Federation International de la Preconlrainte, London, United Kingdom.
To be published.
Formulas for Structural Dynamics: Tables, Graphs and Solutions By Olga Lebed,&nbspIgor A. Karnovsky,&nbspIgor Karnovsky,
Frankel, A., Mueller, C., Barnhard, T., Perkins, D., Leyendecker,E., Dickman, N., Hanson, S., and Hopper, M., ―National Seismic Hazard
Maps, June 1996: Documentation,‖ U.S. Geological Survey, Open-File Report 96-532, 1996.
Freeman, S., ―Racking Tests of High-Rise Building Partitions,‖ Journal of Structural Engineering, V. 103, No. ST8, August 1977, pp.
1673-1685.
French. C . Leon, R., and Grundhoffer.T., "Bond Behavior of Uncoated and Epoxy Coated Reinforcement in Concrete," Structural
Engineering Report No. 92-04. University of Minnesota, Center of Transportation Studics. May 1992. 208 pp.
FujiI, Watanabe, Tak.,naka,. H., "Studies on Composite Girder Bridges Using Prestressed Precast concrete Slabs, Proceedings,
US/Japan Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan, October 29-3 l , pp.
George G. Penelis and Andreas J. Kappos. Earthquake resistant concrete structure
Ghali, A., and Neville, A. M., Structural Analysis: A Unified Classical and Matrix Approach, Third Edition, Chapman and Hal l, New York,
NY, 1989.
Ghali. A., and Neville. A. M., Structural Analysis; A Unified Classical and Matrix Approach. Intext Educational Publishers, 1972.
Ghosh, S., and Markevicius, V., ―Design of Earthquake Resistant Shear walls to Prevent Shear Failure,‖ Fourth U.S.
Goodno, Barry J. and Craig, James I., "Historical Overview of Studies on the Contribution of Cladding to Lateral Resistance of
Buildings," Proceedings: Architectural Precast Cladding-Its Contribution to Lateral Resistance of Buildings. PCI, 1989: pp 36-47.
Gorgun. H .. "Semi- Rigid Behavior of Connections in Precast Concrete Structures," Ph.D. Thesis, University of Nottingham. United
Kingdom. 1997.
Gregorian, C. E. Yang, T. S. and Popov, E. p. "Slotted Bolted Connection Energy Dissipators." Earthquake Engineering Resl"!arch
Center. Repon No. UC8/EERC-92J10. July 1992. 21 pp.
Gulkan, P. and Sozen. M. A. "[nelas-tic Responses of Reinforced Concrete Structure.~ to Earthquake Motions," Reillforced Concrete
Structures ill Seismic ZOliel', Publication SP-53, American Concrete Institute. Detroit. MI.1977.pp.I09-115.
Hajime Umemura, Haruo Takizawa. Dynamic response of reinforced concrete buildings.
Hajime, O., and M. Kohichi. 1991. Nonlinear Analysis and Constitutive Models of Reinforced Concrete .Tokyo, Japan: Gihodo Shuppan
Co. Ltd.
Hall, J. F. (Editor), 1995, ―Northridge Earthquake Reconnaissance Report,‖ Earthquake Spectra, V. 11, Supplement C, No. 1, Sept.-
Oct., p. 523.
Hanson, N. W., "Seismic Tests of Horizontal Joints," Supplemental Report 'C', Design and Construction of Large Panel Concrete
Structures, Office of Policy Development and Research, Department of Housing and Urban Development, Washington, D.C., January
1979.
Harries, D. Mitchell, W. D. Cook, and R. G. Redwood, ―Seismic Response of Steel Beams Coupling Concrete Walls, Journal of
Structural Engineering, ASCE, Vol. 119, No. 12, December 1993.
Harries, G. Gong, and B. M. Shahrooz, ―Behavior and Design of Reinforced Concrete, Steel, and Steel-Concrete Coupling Beams,‖
Earthquake Spectra, Vol. 16, No. 4, November 2000.
Harris, H. G., and Abboud, B. E., "Cyclic Shear Behavior of Horizontal Joints in Precast Concrete Large Panel Buildings," Proceedings
of a Workshop on Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, April 27-29, 1981, pp.
403-438.
Hawkins, N. M., and Ghosh, S. K., Acceptance Criteria for Special Structural WaJJs Based on ValJdation Testing, Pro-posed
Provisional Standard and Commentary, S.K. Ghosh As-sociates Inc., Northbrook, IL, 2003
Hawkins. N. M . and Hjoneset. K .• "Minimum Reinforcement Requirements or Concrete Aexural Members: ' Chapter 15. Applications of
Fracture Mechanics to Reinforced Concrete.A. Carpenteri (Editor). Elsevier. 1991 . pp. 3794 12.
Hawkins. N. M .. "Research Considerations for Precast Concrete Construction in U.S.A.:' Seminar 011 Precast Concrete Construction in
Seismic Zones, Japan concrete institute Tokyo. Japan, October 27031. 1986, V. 1-1, pp. 295-31O.
Hofheins, C., ―Welded Loose-Plate Connections for Hollow- Core Precast Wall Panels,‖ M.Sc. Thesis, Department of Civil &
Environmental Engineering, University of Utah, Salt Lake City, UT, May 1999.
Holmes, W. T., and P. Sommers, eds. 1996. Northridge Earthquake of January 17, 1994 Reconnaissance Report. V. 2. Supplement C
to Earthquake Spectra, V. 11. Oakland, CA: Earthquake Engineering Research Institute (EERI).
Holmes. William T and Sommers, Peter (Editors), "Northridge Earthquake of January 17, 1994, Reconnaissance Report. Volume 2."
Earthquake Engineering Research Institute, Eonhqlmu Spectra. Supplemenl C (0 V. J J, January 1996.
Hota, S. R.. and Naaman, A. E., "Bond-Stress Slip Response of Reinforcing Bars Embedded in Fiber Reinforced Cement Composites
Under Monotonic and Cyclic Loading." Report No. UMCEE 95-15. University of Michigan. Ann Arbor, MI. June 1995.
Hutchinson, R. L., "Post-Tensioned Horizontal Connections Typically Used for Precast Concrete Load bearing Shear Wall Panels," M.
Sc. Thesis, University of Manitoba, Winnipeg, January 1990.
Igarashi, A.. Scible, F., Hegemier. G .. and Priestley, M. J. N., "The U.S.-TCCMAR Full-Scale Five-Story Masonry Research Building
Test. Part III -Seismic Load Simulation," Report SSRP-94103. University of California. San Diego. CA.
ISE. "Structural Joints in Precast Concrete." Institution of Structural Engineers, London. United Kingdom, August 1978.56 pp.
Ishizuka, T., "Effect of Bond Deterioration on Seismic Response of Reinforced and Partially Prestressed Concrete Ductile Moment-
Resisting Frames," Ph.D. Thesis ,University of Washington, Seattle, WA,1987.
izumi, M., and Abe,G. " Shear Strength of Precast prestressed joints" Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan October 29-31,1986, 97-110.
James R. Harris and Finley A. Charney. "The Effect of Architectural Precast Concrete Cladding on the Lateral Response of Multistory
Buildings," Proceedings: Architectural Precast Cladding-Its Contribution to Lateral Resistance of Buildings. PCI, 1989: pp 80-96.
Kabeyasawa, T., "Ultimate-State Design of Wall· Frame Structures," in Earthquake Resistance of Reinforced Concrete Structures, A
Volume Honoring Hiroyuki Aoyarna. Editor. T.Okada. Department of Architecture, Faculty of Engineering, University of Tokyo, Japan,
November 1993, pp. 431-440.
Kallros, M. K., and Spencer R. A . "An Experimental Investigation of the Behavior of Connections in Thin Precast Concrete Panels
Under Earthquake Loading." MS Thesis, University of British Columbia, Vancouver, British Columbia, Canada, April 1987.
Kang, S., S. Keowen, R. Nigbor, and A. Salamanca. 2008. PCI-DSDM Initial Ambient and Forced Vibration Test Data. Internal report.
Chicago, IL: PCI.
Kanoh, Y., "review of Japanese precast Concrete Frame Systems Used as Building Structures," , Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan October 31. Pp
Kao, G., 1998, ―Design and Shake-Table Tests of a Four-Storey Miniature Structure Built with Replaceable Plastic Hinges‖, M.E. Thesis,
Dept. of Civil Engineering, University of Canterbury, Christchurch, NZ.
Karadogan, H. F., T. Huang, L. W. Lu, and M. Nakashima. 1980. Behavior of Flat Plate Floor System under In-Plane Seismic Loading.
In Proceedings of the Seventh World Conference in Earthquake Engineering, V. 5, pp. 9–16. Ankara, Turkey: Turkish National
Committee on Earthquake Engineering.
Kelly, J. M., Skinner, I., and Heine, A. J. 1972. Mechanisms of Energy Absorption in Special Devices for Use in Earthquake Resistant
Structures. Bulletin of the New Zealand National Society for Earthquake Engineering, 5(3): pp. 63-68.
Keronen. A., '"Effect of Semi· Rigid Connect ions in Reinforced Precast Concrete Portal Frame – Load Tests," Report 69. Technical
University of Tampere, Finland, 1996.
Kowalsky. M. J.. Priestley. M. J. N., 3I1d MacRae. G. A., "Displacement- Based Design of RC Bridge Columns in Seismic Regions,"
Ear1hquau Engineering and Structural Dynamics ,V. 24, 1995, pp. 1623-1643.
Kramar, M., T. Isakovic, and M. Fischinger. 2008.Seismic Collapse Safety of RC Columns in Precast Industrial Buildings. No. 05-01-
0396. In 14th World Conference on Earthquake Engineering. Beijing, China: China Earthquake Administration. CD-ROM.
Kunze, Walter E., Fintel, Mark, and Amrhein, James E., "Skopje Earthquake Damage," Civil Engineering, V. 33,No. 12, December 1963,
pp. 56-59.
Kurama, Y., and Farrow, K., ―Ground Motion Scaling Methods for Different Site Conditions and Structure Characteristics, ‖Earthquake
Engineering and Structural Dynamics, V. 32, No.15, December 2003, pp. 2425-2450.
LATERAlA Version 1.10, Static Lateral Analysis Program for Wind and Seismic Loading of Shear Wall Assemblies, Jacques &
Aswad,lnc., Denver, CO, 1998.
lB. Elliott, K. S., Davies. G .. and Gorgun, H., "Component Method Validation Tests in Precast Concrete Semi-Rigid Connections.'" Semi-
Rigid Structural Connections, Proceedings of IABSE Colloquium. V. 75. Istanbul. Turkey.1996, pp. 299-308.
Leon, ―Interior Joints with Variable Anchorage Lengths,‖ Journal of Structural Engineering, ASCE, Vol. 115, No. 9, September 1989.
Lew. "Performance b-Scale Preca51 Concrete Beam-Subjected to Inelastic Loads:' NIST 4433. Institute and MD. October M. J. -
Reillforctd Ctmcrele alltl M asQ/U)' Building.f. New York.. NY. 1992.
Lindberg, R.. ct aI., "Beam-to-Column Connections in a Story Height Concrete Frame." Report 57. Technical University of Tampere,
Finland, 1992.
Llorente, C. A., "Inelastic Behavior of Precast Shear Walls," Massachusetts Institute of Technology, Department of Civil Engineering,
Research Report No. R81-25, Order No. 710, August 1981.
lmai, H., Kanoh, Y" " Standard for Performance Evaluation of rebar joints ", Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, 29-31. 1986,
Low. S·G .. " Behavior of a Six Story Office Building Under Moderate Seismicity." Ph.D. Dissertation, University of Nebraska- Lincol n.
Lincoln. Ncbraska. May 1995. 135 pp.
Mahdi. A. A .. "Moment Rotation Effects on the Stability of Columns in Precast Concrete Structures," Ph.D. Thesis. University of
NOllingbam, United Kingdom. 1992.
Mahin, S., and Bertero, V., ‖Problems in Establishing and Predicting Ductility in Structural Design,Proceedings, International Symposium
on Earthquake Structural Engineering, St. Louis, MO, 1976
MainSlone, R. 1.. "On the Stiffnesses and Strengths or In fill Frames," Building Research Establishment Paper CP2{72, Garsto n,
Watford ,United Kingdom, February 1972.
Martin. L. D., and Korkosz, W. J., "Connections for Precast Prestressed Concrete Buildings." Precast/Prestressed Concrete Institute,
Chicago, IL. March 1982.
Mast. R. F., "Auxiliary Reinforcement in Concrete Connections." Proceedings of the American Society of Civil Engineers, Journal of rhe
Structural Division, V. 94. ST6. June1968, pp. 1485·1504.
Mattock. A. H .. "Shear Transfer in Concrete Having Reinforcement :ll an Angle to the Shear Plane."' Shear ill Reinforced concrete. SP-
42. American Concrete Institute. Detroit. MI. pp. 17-42.
Megget, L., and Fenwick, R. C., ‖Seismic Behavior of a Reinforced Concrete Portal Frame Sustaining Gravity Loads,‗ Bulletin of the
New Zealand National Society for Earthquake Engineering, V. 22, No. 1, 1989, New Zealand, pp. 39-49.
Meinheit, D. F. and Jirsa, J. D. February 1977. The Shear Strength of Reinforced Concrete Beam Column Joints, CESRL Report No. 77-
1. Austin, TX: University of Texas at Austin, 271 p.
Meinhelt and J. O. Jirsa, ―Shear Strength of R/C Beam-Column Connections,‖ ASCI Journal of the Structural Division, Proceedings of
the American Society of Civil Engineers, Vol. 107, No. ST11, November 1981.
Mejia-McMaster. J. C. and Park. R "Precast Concrete Hollow-Core Floor Unit Support and Continuity."' Research Report No. 94/4.
Department of Civil Engineering. University of Canterbury. Christchurch. New Zealand. 1994.
Menegotto, M., ―Precast Floors Under Seismic Action,‖ Proceedings, The Second International Symposium on Prefabrication—Helsinki,
Finland, May 2000.
Miranda, E., ―Inelastic Displacement Ratios for Structures on Firm Sites,‖ Journal of Structural Engineering, V. 126, No.10, October
2000, pp. 1150-1159.
Miranda, E., and Aslani, H., ―Probabilistic Response Assessment for Building-Specific Loss Estimation,‖ Pacific Earthquake Engineering
Research Center (PEER) Report, 2003.
Miranda, E., and Ruiz-Garcia, E., ―Evaluation of Approximate Methods to Estimate Maximum Inelastic Displacement Demands,‖
Earthquake Engineering and Structural Dynamics, V.31, No. 3, March 2002, pp. 539-560.
Mosier, W. G. 2000. Seismic Assessment of Reinforced Concrete Beam-Column Joints. MSCE Thesis, Dept. of Civil Engineering,
University of Washington, 218p.
N. M. Newmark, ―Current Trends in the Seismic Analysis and Design of High-Rise Structures,‖ in Earthquake Engineering, Chapter 16,
R. L.Wiegel (Ed.), Prentice Hall, Englewood Cliffs, New Jersey, 1971, pp. 403–424.
Nassar, A., and Krawinkler, H., ―Seismic Demands for SDOF and MDOF Systems,‖ John A. Blume Earthquake Engineering Center,
Report No. 95, Department of Civil Engineering, Stanford University, Palo Alto, CA, June 1991.
National Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Berkeley, CA, V. 2, 1990, pp.905-913.
NBS Committee, " Ductile Frames of Precast Concrete." National Bureau of Standards Research program. Washington D.C.
New Zealand Standards Association. 1992. Code of Practice for General Structural Design and Design Loadings for Buildings, N2S
4203 :1992 . New Zealand, Wellington.
Newmark. N. M . and Hall. W. J ." Procedure and Criteria for Earthquake Resistant Design." Building Practice for Disaster Mitigation.
Building Science Series 45. National Bureau of Standards. Washington. D.C . 1973.
Nishiyama, M. 2002. Failure Mechanism of Post-Tensioned Beam-Column Subassemblages. Proceedings of the First fib Congress:
Concrete Structures in the 21st Century, Session 6, pp.75–76.
NIST, " 1994 Northridge Earthquake: Performance of Structures, Lifelines, and Fire Protection System," NIST Special Publication,
National Institute of Standards and Technology, Gaithersburg, MD, 1994.
Northridge Earthquake, January 17, 1994, Preliminary Reconnaissance Report," Earthquake Engineering Research Institute, Oakland,
CA, March 1994.4. Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages During the 1994
Northridge Earthquake, "Proceedings, XIII ASCE Structures Congress, Boston, MA, April 1995.
Northridge Earthquake: Performance of Structures, Lifelines, and Fire Protection Systems," NIST Special Publication 862,National
Institute of Standards and Technology, Gaithersburg, MD, May 1994.
Oliva, M. G . and Shahrooz. B. M . "Shaking Table Tests Panel Structures Using Limited Slip Bolted Joints," Proceedings of the Eighth
World Conference on Earthquake Engineering. V. 6. 1984, pp. 7 17-724.
Otani, S., ―Hysteresis Models for Reinforced Concrete for
Pall, A. S . and Marsh, C., "Seismic Response of Large Panel Structures Using Limited-Slip Bolted Joints." Third Canadian Conference
on Earthquake Engineering, McGill University ,V. 2, Montreal , Quebec. Canada, 1979, pp. 899·9 16.
Pantazopoulou, S. and Bonacci, J. 1992. Consideration of Ouestions about Beam-Column Joints. ACI Str . Jo., 89(1), January-
February: pp. 27-36.
Pantelides, C. P., Reaveley, L. D., Gergely, I., Hofheins, C., and Volnyy, V., ―Testing of Precast Wall Connections,‖ University of Utah,
Department of Civil and Environmental Engineering, Report UUCVEEN 97-02, 97-03, 98-01, Salt Lake City, UT, 1997-98.
Parra-Montesinos, G. J., and J. W. Wight. 2000. Seismic Response of Exterior RC Column-to-Beam Steel Beam Connections. Journal
of Structural Engineering, V. 126, No. 10 (October): pp. 1113–1121.
Paulay, T . Park. R .• and Phillips. M. H . "Horizontal Construction Joints in Cast in Place Concrete," Shear in Reinforced Concrete, ACI
Special Publication SP-42. V. 2, Fannington Hills, Ml. 1974, pp. 599-616.
PCFA. "'Frames for Multistory Buildings - An Economic Comparison."Precast Concrete Frames Association. Leicester, United Kingdom.
1985.
Pcxhanan. S . and Hannon. T . "Bond Slip Model for Generalized Excitation Including Fatigue," ACI Materials Journal. V. 86, No.5,
September October 1989, pp. 46.5474.
Pearce, D. 1.. and Mallhews. D. D.,"An App ..... isal of the Design of Shear Wall s in 8 0)( Frame Structures," Property Services
Agency, London, United Kingdom. April 1973.
Phillips. R. 1. " Performance of Parking Structures in the Northridge Earthquake." Procu din85. 63rd Annual Convention, Structural
Engineer Association of California, Lake Tahoe. CA, September 1994. pp. 177- 182.
Phillips. R. J . ''Santa Monica College, Precast Concrete Parking Structure." 1994 Northridge Eat1hquakL - Building Case Studies
Propjet, Proposition 122. Product 3.2, Seismic Safety Commission. State of California. Sacramento. CA. pp. 137· 142.
Pincheira, J. A., Oliva, M. G., and Kusumo-Rahardjo, F. I., ―Tests on Double-Tee Flange Connectors Subjected to Monotonic and Cyclic
Loading,‖ Research Report, University of Wisconsin, Madison, WI, 1998.
Pinelli, Jean-Paul, Moor, Christian, Craig, James I, and Goodno, Barry J. Experimental Testing of Ductile Cladding Connections for
Building Facades
Pochanart, S., and Harmon, T., "Bond-Slip Model for Generalized Excitation Including Fatigue," AC1Materials Journal, V. 86, No.5,1989,
pp. 465-474.
Poole, R. A" and Clendon, J, E .. "Mid City Towers - An Efficient Precast Concrete Framed Building," Proceedings, PACIfic Concrete
Conference, V. I, Auckland, New Zealand, November 1988, pp. 319-332.
POpo\'lcS. S., "A Numerical Approach to the Complete Stress-Strain Curves for Concrete," Cement and Concrete Research. V. 3, No.
5, Sept ember 1973, pp. 583·599.
Popov, Egor P. and Youssef, Nabih. Seismic Cladding of Walls and Domes. Elsevier Science Ltd., T199-4, 1998.
Porter," M. L., and Sabri, A. A, "Plank Diaphragm Characteristics," U.S.-Japan Coordinated Program for Masonry Building Research
Report 5.1-1, College of Engineering, Iowa State University, Ames, lA, July 1990.
Posada, M., and S. Wood. 2002. Seismic Performance of Precast Industrial Buildings in Turkey. In 7th U.S.National Conference on
Earthquake Engineering (7NCEE). Oakland, CA: Earthquake Engineering Research Institute.
Prakash, V., and Powell, G., ―DRAIN-2DX Base Program Description and User Guide; Version 1.10,‖ Report No.UCB/SEMM-93/17,
Structural Engineering Mechanics and Materials, Department of Civil Engineering, University of California, Berkeley, CA, November
1993.
Precast Concrete Strategic Group," Precast Concrete Study Summary Report." Amp Economic Consultants, London, United Kingdom.
November 1989.
Priestley, M. J. N F. Seible, and M. Calvi, Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, 1995.
Prof, Dip. -Ing.J.N.J.A.Vambersky / Prof.dr.ir.J.C.Walraven / Ing.J.P.Straman.Designing and understanding precast concrete structures
in building.
Quinn, A. V . "Parking Garages in the Northridge Earthquake. Thesis submitted in partial fulfillment of the requirements for the MSCE
degree. Department of Civil Engineering. University of Washington. Seallie. WA, 1995.
R. Li and M. Pourzanjani, ―Sensitivity of Building Response to Nonlinear Analysis Models,‖ The Structural Design of Tall Buildings. John
Wiley & Sons, 1999.
Raynor, D. 1., "Bond Assessment of Hybrid Frame Continuity Reinforcement," MSCE Thesis, Department of Civil and Envi-ronmenta[
Engineering, University of Washington, Seall[e, WA,2000.
Ren, R., and Naito, C.J., 2007, "Acceptance Criteria for Precast Concrete Diaphragm Connectors Based on Structural Testing ", ATLSS
Report # 07-XX, Lehigh University, Sept.
Restrepo, J. Park, R., and Buchanan, A., ―Seismic Load Tests on Connections Between Precast Concrete Elements,‖ New Zealand
Concrete Society, Proceedings, Silver Jubilee Conference, Wairakei, Taupo, New Zealand, 1989.
Restrepo, J. Dodd, L. L., Park, R .. and Cooke, N., "Variables Affecting the Cyclic Behavior of Reinforcing Steels," ASCE Journal of
Structural Engineering, V. 120, No. I I, 1994.
Rhodes, A. B., Sause, R., Pessiki, S., and Fleischman, R. B., "Seismic Performance of Precast Parking Structures: Transverse
Direction," Earthquake Engineering Research Report No. EQ-97-03, Department of Civil and Environmental Engineering, Lehigh
University, Bethlehem, PA, 1997.
Rodriguez, M. E., Restrepo, J. I., and Carr, A. J., "Earthquake Induced Floor Horizontal Accelerations in Buildings," Earthquake
Engineering and Structural Dynamics, V. 31, No.3, March 2002, pp. 693-718..
Ruiz-Garcia, J., and Miranda, E., ―Inelastic Displacement Ratios for Evaluation of Existing Structures,‖ Earthquake Engineering and
Structural Dynamics, V. 32, No. 8, July 2003, pp.1237-1258.
Saiidi, M., and Sozen, M., ―Simple Nonlinear Seismic Analysis of R/C Structures,‖ Journal of Structural Engineering, ASCE, V. 107, No.
ST5, 1981, pp. 937-951.
Saint Venant, B. 1855. Memoire des Savants Etrangers. Journal de Mathematique, Liouville, taille 14.
SEAOC Performance Based Seismic Design Ad Hoc Committee. "Tentative Performance Based Seismic Engineering Guidelines -
SEAOC Blue Book, Appendi" G," 1998.
Seismic construct program
Seo, C., ―Behavior and Design of Shear Leg for Shear Connectors Between Double Tee Members,‖ MS Report, University of
Wisconsin, Madison, WI, May 1997, 93 pp.
Sheppard, D. A .. and Phillips, W. R ..Precast Precast and Prestressed Concrete. Third Edition. McGraw. Hill, New York, NY, 1989.
Shibata, A., and Sozen, M., ―Substitute Structure Method for Seismic Design in Reinforced Concrete,‖ Journal of Structural Engineering,
American Society of Civil Engineers, V. 102,No. 12, pp. 3548-3566.
Shiohara. H .• Hosokawa, Y . Nakamura,T., and Aoyama. H., "Direct Shear Transfer Mechanism at the Interface of Reinforced Concrete
Joints." Trtmsactiolls. Japan Concrete Institute, V. 6, 1984, pp. 409-416.
Shioya. T., Igura. M . Nojiri. Y . Akiyama. H . and Okada. T . "Shear Strength of Large Reinforced Concrete Beams." Fracture
Mechanics: Applications to Concrete, Special Publication 118. American Concrete Institute, Fannington Hills. MI. 1989.
Shome, N., and Cornell, C., ―Normalization and Scaling Accelerograms for Nonlinear Structural Analysis,‖ Sixth U.S. National
Conference on Earthquake Engineering, Seattle, WA ,May-June 1998 (CD-ROM).
Shome, N., Cornell, C., Bazzurro, P., and Carballo, J. ,―Earthquakes, Records, and Nonlinear Responses,‖ Earthquake Spectra,
Earthquake Engineering Research Institute, V. 14,1998, pp. 469-500.
Silvester, D. B., and Dickson, A. R., ―Fanshawe Street Building – A Precast Concrete Study,‖ Proceedings of Pacific Concrete
Conference, V. 1, Auckland, New Zealand, November 1988, pp. 333-344.
Somerville, P., ―Report on UC Science Building ground motions‖,
http://www.peertestbeds.net/UCS/Somerville%20Dec%202001%20UCS%20ground%20motions.pdf
Somerville, P., Smith, N., Punyamurthula, S., and Sun, J. ―Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC
Steel Project,‖ SAC/BD-97/04, SAC, Sacramento, CA, 1997.
Sonohe , "State the of art of Low rise Precast Reinforced Concrete structures in Japan, Proceedings, US/Japan Seminar on Precast
Concrete Construction in Seismic zones Tokyo, Japan October 20-3I, 1986,pp.2 1-34.
Sorensen, K., "Precast Frame Construction in Zones 3 4" Proceedings of the Conference. ATC-8,.Los
Soudki. K. A . "Behavior of Horizontal Connections for Precast Concrete Load bearing Shear Wall Panels Subjected 10 Large Reversed
Cyclic Deformations," Ph.D. Thesis, University of Manitoba. Winnipeg, Manitoba ,Canada, May 1994,670 pp.
Sozen, M. A., ―Review of Earthquake Response of R/C Buildings with a View to Drift Control,‖ State-of-the-Art in Earthquake
Engineering, O. Ergunay and M. Erdik (Editors), Ankara, Turkey, 1981, pp. 383-418.
Specijicatioll for Concrete Consum:tiOlI,fa.':; 3109: 1987. Standards Association of New Zealand, Wellington. New Zealand. 1987,
Spencer, R., "Earthquake Resistant Connec1ions for low Rise ~cast Concrete Buildings," Seminar on Precast Concrete COn5U'UCtion
in Seismic Zones, V. 1, NSFIJapan Society for the Promotion of Science. October 1986.
Stafford-Smith, B .. and Carter. c., "A Method of Analysis for" Infill Frames," Paper 1218, Proceedings. Institution of Civ il Engineers.
London. United Kingdom, September 1969.
Standards New Zealand, 1997 ―Concrete Structures Standard—The Design of Concrete Structures‖ and ―Commentary on the Design of
Concrete Structures,‖ NZS 3101: Parts 1 and 2:1995 and ―Amendment No. 1 to NZS 3101, 1997,‖ Wellington, New Zealand.
Stanton, J. F. "Hybrid Moment-Resisting Precast Beam Column Connections," World Wide Advances in Structural Concreteand
Masonry (A. E. Schultz and S. L. McCabe. Editors),ASCE Stroetures Congress, Chicago, IL, 1996, pp. 266-277.
Stevenson. R. B and Beattie. G. J. "Cyclic Load Testing of a Beam Cruciform Incorporating Precast Beam Elements." Central
Laboratories Re· port 88-85204/1. Works and Development Services Corporation (NZ) Ltd .• Lower Hutt, New Zealand. 1988..
Stone, W. C., Cheok, G. S. and Stanton, J. F. 1995. Beam-Column Connection Subjected to Seismic Loads. ACI Str.Jo., 92(2), March-
April: pp. 229-249.
Structural Engineers Association of California (SEAOC) Ad Hoc Committee on Precast Concrete, Committee Correspondence, 1994.
Tel1l{/th'e ProliisiolJsJor the Del"e/oplIJe/ 1f oj Seismic Regulations for Buildings. Applied Technology Council. ATC Publication ATC-3-
06. National Bureau of Standards Special Publication 5[0. National Science Foundation Publication 78-8. [978.
Tena-Colunga, A. and Abrams, D. P., 1992, Response of an Unreinforced Masonry Building During the Loma Prieta Earthquake‖,
Structural Research Series No. 576, Department of Civil Engineering, University of Illinois at Urbana-Champaign.
Tests on Reinforcing Bar in Reinforced Concrete Columns Using NMB Splice Sleeves." Test Report. Splice Sleeves Japan Ltd Tokyo,
Japan. 1990.
The AU Design Recommendations for Seismic Design of Reinforced Concrete." Translated by Teshigawara. Otani and Anderson.
Structural Systems Research Repon No. SSRP-91/04. University of California. San Diego. CA. July 1991.
Todd, D. R., N. J. Carino, R. M. Chung, H. S. Lew, A. W. Taylor, W. D. Walton, J. D. Cooper, and R. Nimis. 1994. 1994 Northridge
Earthquake: Performance of Structures, Lifelines, and Fire Protection System. Gaithersburg, MD: National Institute for Science and
Technology.
Uang, C. M., and Maarouf, A., "Seismic Displacement Amplification Factor in Uniform Building Code," Research Bulletin Board,
SEAONC. No. BB93-3, San Francisco, CA, 1994, p. BI .
Vallenas, V. V. Bertero, and E. P. Popov, Hysteretic Behavior of Reinforced Concrete Structural Walls, Report UCB/EERC-79/20,
Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, August 1979, 234p.
Veletsos, A. S. and Newmark, N.M. 1960. Effect of Inelastic Behavior on the Response of Simple Systems to Earthquake Motions.
Proc. 2WCEE, Tokyo and Kyoto, pp. 895-912.
Venuti, W. J., and D. Nazarian. 1968. Diaphragm Shear Connectors between Flanges of Prestressed Concrete TBeam. Report no. ST-
0007-68. San Jose State College, San Jose, CA.
Vernu, S. 2003. Connection and Structural Level Analysis of Precast Hybrid Frame Systems. Master Thesis, Iowa State University,
Ames, Iowa.
Virdi, K. S. , Dnd Ragupathy, P., "Stability Problems Associated with the Behavior of Joints in Precast Concrete Frames," Proceedings
of First International Conference on Lessons From Structural Failures. Prague. Czechoslovakia. September 199[. pp. 123-138.
Viwathanatepa, S., Popov, E. P., and Benero, V. V "Seismic Behavior of Reinforced Concrete Interior Beam· Column Sub
assemblages." Report No. UCBIEERC·79/14, Earthquake Engineering Research Center. University of California. Berkeley. CA, 1979.
Walker, Brice, Earthquake. Alexandria,VA: Time-Life Books, 1982, p. 159
Wallace, ―New Methodology for Seismic Design of RC Shear Walls,‖ Journal of Structural Engineering, ASCE, Vol. 120, No. 3, March
1994.
Wallace, ―Reinforced Concrete Walls: Recent Research & ACI 318-2001,‖ Proceedings of the 6th U.S. National Conference on
Earthquake Engineering.
Wallace, ―Seismic Design of RC StructuralWalls. Part I: New Code Format,‖ Journal of Structural Engineering, ASCE, Vol. 121, No. 1,
January 1995.
Wallace, John W., and Moehle, Jack P. 1992. Ductility and Detailing Requirements of Bearing Wall Buildings. Journal of Structural
Engineering, V. 118, No.6 (June).
Walraven. J. Co, and Mercx. W. P. Mo, "The Bearing Capacity for Prestressed Hollow Core Slabs." Heron.28. No.3, Delft University of
Technology. Delft, Netherlands, 1983.
Wan, G. and Fleischman, R. B., 2007b. ―Effect of Spandrel Beam to Double Tee Connection Characteristic on Precast Diaphragm
Response‖, in preparation.
Wan, G. and Fleischman, R.B., 2007a, ―A Rational Method for Calculating the Service Stiffness and Yield Strength of Precast Floor
Diaphragms‖, in preparation.
Weidlinger, Paul, and Ettourney, Mohammed. Sequential Coupling: New Structural Connections for Seismic Control .Journal of
Structural Engineering, ASCE, V. 119, No.1, January: 1993
West. J. 5 .• "Behaviour of Horiwntal Connections for Precast Concrete Load-Bearing Shear Wan Panels Subjected to Large Reversed
Cyclic Shear Loading," MS Thesis, University of Manitoba. Willnipeg, Manitoba. Canada, August 1993,3 19 pp.
Wolfram. 5 .. Mllthematica: A System for Doing Mathematics by Computer. Addison-Wesley Publishing Co Redwood City, CA. 1988.
Wood, R. U .. " Plasticity. Composite Action and Collapse Design of Unreinforced Shear Wall Panels in Frames." Papcr 81 10.
Proceedings, Institution of Civil Engineers, v. 65, June 1978.
Wood, S. L. 1991. Performance of Reinforced Concrete Buildings During the 1985 Chile Earthquake: Implications for the Design of
Structural Walls. Earthquake Spectra, V. 7, No.4: pp. 607-638.
Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages During the 1994 Northridge Earthquake,"
Proceedings, XIII ASCE Structures Congress, Restructuring: America and Beyond, V. 1, New York, NY, 1995, pp. 563-566.
Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages in the Northridge Earthquake: Lessons
Learned," Proceedings, XIV ASCE Structures Congress, Chicago, IL, V. 2, April 1996, pp. 1221-1227.
Wood. S. L . Smnton. J. F . and Hawkins. N. M., M Evaluation of Parking Garage Response During the 1994 Northridge Earthquake,"
Proceedings. Eleventh World Conference on Earthquake Engineering. Acapulco. Mexico. June 1996.
Wood. S. L . Stanton. 1. F . and Hawkins, N. M . "Influence: of Aoor Diaphragms on the Seismic Response of Precast Parking Garages.
~ Proceedings. NEHRP Conference and Workshop on Research on the Northridge. California Earthquake of January 17, 1994,
California Universities for Research in Earthquake Engineering, Volume III-A, 1998, pp. 189- 196.
Woodward-Clyde Federal Services, ―Suites of Earthquake Ground Motions for Analysis of Steel Moment Frame Structures – Draft
Report,‖ http://nisee.berkeley.edu/data/strong_motion/sacsteel/draftreport.html
Y. J. Park, A. M. Reinhorn, and S. K. Kunnath, ―DARC: Inelastic Damage Analysis of Reinforced Concrete Frames—Shearwall
Structures,‖ Technical Report NCEER-87- 0008, State University of New York at Buffalo, Buffalo, New York, 1987.
Y. Xiao and H. W. Yun, ―Full Scale Experimental Studies on High-Strength Concrete Columns,‖ Report No. USC SERP 98/05,
University of Southern California, Los Angeles, July 1998.
Yagci, 5., "Behavior of an Improved Exterior Precast Beam-Column Connection Under Reversed Cyclic loading." M.S. Thesis,
Department of Civil Engineering. Middle East Technical University . Ankara. Turkey. 1993.
Yee, A. A., "Seismic Considerations for Precast Concrete Construction , Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, October 29-31. 1986
Yılmaz, S., A. Kuyucular, S. M. Senel, and M. Inel.2006. Evaluation of Turkish Seismic Code for Pinned Precast Concrete Structures. In
Proceedings of the 7th International Congress on Advances in Civil Engineering. Istanbul, Turkey: Istanbul Technical University.CD-
ROM.
Zerbe, H. E. and Durrani, A. J . 1989. Seismic Response of Connections in 2-Bay RIC Frame Subassemblies. ASCE, 10. Str. Eng.,
115(11): pp. 2829-2844.
Chopra and R. K. Goel, ―Direct Displacement-Based Design: Use of Inelastic vs.Elastic Design Spectra,‖ Earthquake Spectra, Vol. 17,
No. 1, February 2001.
Clough, A., and Penzien, J., Dynamics of Structures, Second Edition, McGraw Hill, New York, NY, 1993
Conley, J., Priestley. MJ.N. and Srithamn. 5., "Wall Direction Modeling of the Five-Story PRESSS Precast Test Build-ing." Repon
SSRP 99119. University of California, San Diego. CA. 1999.
DYNAMICS OF STRUCTURES‖ (3nd Edition) by Ray Clough and Joseph Penzien
Ghosh, S.K. 2002. Seismic Design using Structural Dynamics (2000 IBC). International Conference of Building Officials, Whittier, CA.
Ghosh, S.K., and Domel, A. W. 1992. Design of Concrete Buildings for Earthquake and Wind Forces. Skokie, IL: Portland Cement
Association.
Loeding, S., Kowalsky, M. J., and Priestley, M. J. N., ―Direct Displacement-Based Design of Reinforced Concrete Frame Buildings,‖
Report SSRP 98/08, University of California, San Diego, CA, 1998.
Palmieri, L . Sagan, E., French, c., and Kreger, M., "Ductile Connections fot' Precast Concrete Frame Systems," Paper No. SP162·13,
Mete A. Sozen Symposium, ACI SP 162, American Concrete Institute, Fannington Hills, MI, 1997,pp. 313·355.
Palmieri. L. French. C. Sagan, E. I., and Kreger. M. E. "Ductile Connections for Precast Concrete Frame Systems," Proceedings of the
Mete Sozen Symposium. American Concrete Institute. Detroit. MI. October 1994, ACi Special Publication (in press).
Pampanin S. (2003): Alternative Design Philosophies and Seismic Response of Precast Concrete Buildings, International Federation
for Structural Concrete (fib), FIB Journal Structural Concrete, Vol. 4, No. 4, December 2003, pp. 203-211.
Pampanin, S., Priestley, M. 1. N .. and Srithamn, 5., "Frame Direction Modeling of the Five-Story PRESSS Precast Test Building."
Repon SSRP 99nO. University of California. San Diego. CA. 1999.
Park Robert " design Concepts for prestressed and Partially Prestressed Precast Concrete Frames," Proceedings of the Conference.
ATC-8,.Los 21-I45·182-
Park, R. and Paulay, T. Reinforced concrete structures. John Wiley and Sons, New York, 1975,769 pp.
Priestley, M. J. N Report on the Fourth U.S.-PRESSS Coordinating Meeting," Report No. 94102, M. 1. N. Priestley (Editor). University
of California-San Diego, La Jolla, CA. March 1994.
Priestley, M. J. N. Performance-Based Seismic Design, State-of-the-Art Plenary Session 2, 12WCEE. Auckland,New
Zealand.January 2000
Priestley, M. J. N. " "Myths and Fallacies in Earthquake Engineering." Proceedings ,Thomas Paulay Symposium, ACI Special
Publication SP1 57. 1995.pp. 23 1-254.
Priestley, M. J. N. "Assessment and Design of Joints for Single-Level Bridges With Circular Columns," Structural Systems Research
Report No. 93/02. University of California at San Diego. La Jo ll a, CA, February 1993,62 pp.
Priestley, M. J. N. "Brief Comments on Elastic Flexibility of Reinforced Concrete Frames, and Significance to Seismic Design,‖
Bulletin, NZ Society for Earthquake Engineering, V. 31, No. 4, December 1998.
Priestley, M. J. N. "Displacement-Based Approaches to Ratio-nat Limit States Design of New Structures," Keynote Address. 11th
European Conference on Earthquake Engineering, Paris. September 1998.
Priestley, M. J. N. "Myths and Fal-lacies in Earthquake Engineering -Conflicts Between Design and Real-ity," Proceedings of the Tom
Paulay Symposium, La Jolla, CA. ACI Spe-cial Publication. American Concrete Institute, Detroit. MI, September 1993. pp. 231-254.
Priestley, M. J. N. "Performance Based Seismic Design ,‖Keynote Address, 12th World Conference on Earthquake Engineering,
Auckland, New Zealand, January 2000.
Priestley, M. J. N. "Report of thc 5th U.S. PRESSS Coordinating Meeting:' PRESSS Report 9511. University of California at San
Diego. La Jolla. CA. November 1995.
Priestley, M. J. N. "Report on the Third U.S. PRESSS Coordinating Meeting." Report No. PRESSS-92102, San Diego. CA. August
1992 .
Priestley, M. J. N. "Research Needs for Precast Seismic Structural Systems." Structural Systems Research Report No. SSRP-88/06.
University of California. San Diego. CA. August 1988.
Priestley, M. J. N. (Editor), "Report on the Third U.S. PRESSS Coordinating Meeting," No. PRESSS 92102,Department of Applied
Mechanics and Engineering Sciences, University of California at San Diego, La JolJa. CA, August 1992, pp. 12- 16.
Priestley, M. J. N. (Editor). "First Meeting of the Joint Technical Coordinating Committee on Precast Seismic Structural Systems
IPRESSS]," Structural Systems Research Report No. SSRP-91/01. University of California. San Diego. CA. 1991.
Priestley, M. J. N. ―The U.S.-PRESSS Program Progress Report,‖ Third Meeting of the U.S.-Japan Joint Technical Coordinating
Committee of Precast Seismic Structural Systems (JTCC-PRESSS), San Diego, CA, November 18-20, 1992.
Priestley, M. J. N. and Kowalsky, M. J. 2000. Displacement-Based Design for Multi-Degree of Freedom Systems. Bulletin of the New
Zealand National Society for Earthquake Engineering, 33(4): pp. 421-444.
Priestley, M. J. N. and Kowalsky, M. J., ―Aspects of Drift and Ductility CapACIty of Cantilever Structural Walls,‖ Bulletin, NZ Society for
Earthquake Engineering, V. 31, No. 2, June 1998.
Priestley, M. J. N. and Kowalsky, M. J., ―Direct Displacement- Based Design of Concrete Buildings,‖ Bulletin, NZ Society for
Earthquake Engineering, V. 33, No. 4, December 2000.
Priestley, M. J. N. and Kowalsky. M. 1., "Direct Displacement-Based Design of Buildings," Bulletin of the NZ National Society for
earthquake Engineering. 1999.
Priestley, M. J. N. Verma, R., and Xiao. Y .. "Seismic Shear Strength of Reinforced Concrete Columns," Journal of Structural
Engineering, ASCE. V. 120. NO.8. August 1994, pp. 23 10·2329.
Priestley, M. J. N."Seismic Design Philosophy for Precast Concrete Frames." Stuctural Engineering internarional, V. 6. No. I, February
1996, pp. 25-31.
Priestley, M. J. N., Kowalsky, M. J., Ranzo, G. and Benzoni, G. 1996. Preliminary Development of Direct Displacement-Based Design
for Multi-degree of Freedom Systems. Proc. SEAOC Annual Conference, October.
Priestley, M.J. Nigel. Direct Displacement-Based Design of Precast/Prestressed Concrete Buildings, V. 47, No.6, November-
December 2002: pp. 66-69.
Shultz, A. E., and Magaña, R. A., ―Seismic Behavior of Connections in Precast Concrete Walls,‖ Mete A. Sozen Symposium, SP-162,
American Concrete Institute, Farmington Hills, MI, 1996.
Sritharan, S., Aaleti, D., and Thomas, D.J. March 2007. Seismic Analysis and Design of Precast Concrete Jointed Wall Systems, ISU-
ERI-Ames Report. Ames, IA: Iowa State University.
Sritharan, S., and Thomas, D.J. June 2004. An Evaluation of Seismic Design Guidelines Proposed for Precast Jointed Wall Systems,
ISU-ERI-Ames Report ERI-04643. Ames, IW: Iowa State University.
Sritharun. S., Igarashi, A .. Priestley. M. 1. N., and Seible, F .. "Test Dcsign of the PRESSS Five-Story Precast Concrete Building."
Proceedi!lgs. 68th Annual Conve!ltion. Structural Engineers Association of California, Santa Barbara. CA. 1999. PIl·255-261.
November·December 1999
Yanez, R. Park, and T. Paulay, ―Seismic Behavior of Reinforced Concrete Structural Walls with Regular and Irregular Openings,‖
Pacific Conference on Earthquake Engineering, New Zealand, November 1991.
Bowles, Joseph E. Foundation Analysis end Design .: NeWYork: McGra:w-Hilf1,:988.• '
Englekirk, Steel Structures: Controlling Behavior Through Design. John Wiley & Sons, New York, 1994.
Fleischman, R. B., Sause, R., Rhodes, A. B., and Pessiki, S., "Seismic Behavior of Precast Parking Structure Diaphragms,"
Proceedings, XIV ASCE Structures Congress, Building an International Community of Structural Engineers, S. K. Ghosh (Editor), V. 2,
Chicago, IL, April 15-18, 1996, pp. 1139-1146.
Fleischman, R. B. and Wan G., 2007, ―Appropriate Overstrength of Shear Reinforcement in Precast Concrete Diaphragms‖, ASCE J.
Struct. Engrg., Special Issue: Precast/Prestressed Concrete Structures under Natural and Human-Made Hazards, Vol. 133, Issue 11,
pp. 1616-26, Nov., Y. Kurama Ed.
Fleischman, R. B., and Farrow, K. T., ―Dynamic Response of Perimeter Lateral-System Structures with Flexible Diaphragms,‖ Journal
of Earthquake Engineering & Structural Dynamics, V. 30, No. 5, May 2001, pp. 745-763.
Fleischman, R. B., and K. T. Farrow. 2002. Seismic Performance of Perimeter Lateral System Structures with Highly Flexible
Diaphragms. Earthquake Spectra, V. 18, No. 2 (May).
Fleischman, R. B., Farrow, K. T. and Eastman, K.,2002, ―Seismic Performance of Perimeter Lateral-System Structures with Highly
Flexural Diaphragms‖, Earthquake Spectra, V. 18, No. 2, May, Earthquake Engineering Research Institute, Oakland, CA.
Fleischman, R. B., Farrow, K. T., and Eastman, K., ―Seismic Response of Perimeter Lateral-System Structures with Highly Flexible
Diaphragms,‖ Earthquake Spectra, V. 18, No. 2, May 2002, pp. 251-286.
Fleischman, R. B., Sause, R., Pessiki, S., and Rhodes, A. B., "Dynamic Response of Precast Parking Structures With Flexible
Diaphragms," paper in preparation.
Fleischman, R. B., Sause, R., Rhodes, A. B., and Pessiki, S., "Seismic Behavior of Precast Parking Structure Diaphragms,"
Proceedings, XIV ASCE Structures Congress: Building an International Community of Structural Engineers, Edited by S. K. Ghosh, V.
2, Chicago, IL, April 15-18, 1996, pp. 1139-1146.
Park Robert "New Trends In the Design of Buildings and Bridge Structures For Earthquake Resistance," Fourth International Seminar
on Seismic Engineering. Universidad de Los Andes, Bogota, CoIombia September 1985.
Park Robert "New Zealand Research into Seismic design of Building Frames incorporating Precast Prestressed Concrete," ,
Proceedings, US/Japan Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan. October 1, 1986,
Park Robert "Precast Concrete in Seismic Resisting Building Frames in New Zealand: ' Concrete International. V.12. No. II .
November 1990. pp. 43-51 .
Park Robert "Seismic Design Considerations for Precast Concrete Construction in Seismic Zones," Seminar on Precast Concrete
Construction in Seismic Zones, V. I, Japan Society for the Promotion of Science-United States National Science Foundation, Tokyo,
Japan. 1986. pp. 1-38.
Park Robert ―Ductile Design Approach for Reinforced Concrete Frames,‖ ―Earthquake Spectra,‖ Professional Journal of the
Earthquake Engineering Research Institute, V. 2, No. 3, May 1986, pp. 565-619.
Park Robert D. C. Kent, and R. A. Sampson. 1972.Reinforced Concrete Members with Cyclic Loading Journal of the Structural
Division, V. 98, No. 7: pp.1341–1360.
Park Robert Paulay, T., and Bull, D. K., ―Seismic Design of Reinforced Concrete Structures,‖ Technical Report No. 20, New Zealand
Concrete Society, October 1997.
Park, R. Some considerations in the seismic design of reinforced concrete interior beam-column joints of moment resisting frames,
Journal of the Structural Engineering Society of New Zealand, Vol. 15, No. 2, September 2002, pp. 53-64.
Park. Some controversial aspects of the seismic design of reinforced concrete building structures.
Stanton, J. F."Connections in Precast Concrete Structures:' Concrete International. V. 9. No. II. November 1987. pp. 49-53.
Stanton, J. F., and Nakaki, S. D. February 2002. Design Guidelines For Precast Concrete Seismic Structural Systems,PRESSS Report
No. 01/01-09. Chicago, IL: Precast/Prestressed Concrete Institute (PCI).
Stanton, J. F., and Nakaki, S. D., "PRESSS Industry Seismic Work-shops," PRESSS Research Report 91102, University of California
at San Diego, San Diego, CA, August 1991.
Stanton, J. F., and Nakaki, S. D., ―Design Guidelines for Precast Concrete Seismic Structural Systems,‖ Precast Seismic Structural
Systems (PRESSS) Report No. 01/03-09, University of Washington (UW) Report No. SM 02-02, Department of Civil Engineering,
University of Washington, Seattle, WA,
Stanton, J. F., and Nakaki. S. D . " PRESSS Industry Seismic Workshops," PRESSS Research Reports 91/01, 91/02 and 92106, edi
ted by M. J. N. Preistley, University of California at San Diego, San Diego, CA.
Stanton, J. F., Anderson, R. G., Dolan, C. W., and McCleary, D. E., "Moment Resistant Connections and Simple Connections," Final
Report to PCI, SFRD Research Project No. 114, 1986.
Stanton, J. F., Raynor, D. and Lehman, D. E. 2002. Bond Characteristics of Reinforcing Bars Grouted in Ducts. Accepted for
publication by ACI Str. Jo.
Stanton, J.F., and Nakaki, S.D. February 2002. Design Guidelines for Precast Concrete Seismic Structural Systems, PRESSS Volume
3-09. Chicago, IL: Precast/Prestressed Concrete Institute.
Stefano Pampanin .(2003). ―Alternative design philosophies and seismic response of precast concrete buildings‖, Structural Concrete
2003 Vol.4 No.4 . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category
Ali, A., and Wight, J., "Reinforced Concrete Structural Walls with Staggered Opening Configurations Under Reversed Cyclic Loading,"
Report No. UMCE 90-05, Department of Civil Engineering, University of Michigan, Ann Arbor, MI, April 1990,241 pp.
Ali, A., and Wight, J., ―RC Structural Walls with Staggered Door Openings,‖ ASCE Journal of Structural Engineering, V.117, No. 5,
May 1991, pp. 1514-1531.
Allen, M., and Kurama, Y., ―Design of Rectangular Openings in Unbonded Post-Tensioned Precast Concrete Walls,‖ Research Report
No. NDSE-01-01, Department of Civil Engineering and Geological Sciences, University of Notre Dame, Notre Dame, IN, April 2001
(available for download at http://www.nd.edu/~concrete).
Applied Technology Council (ATC). 1981. ATC-8 Proceedings of a Workshop on Design of Prefabricated Concrete Buildings for
Earthquake Loads. Berkeley, CA: ATC.
Applied Technology Council. Design of Prefabricated Concrete Buildings for Earthquake Loads, ATC-8, Berkeley, California, 198 1.
Architectural Institute of Japan: Draft Japanese design guidelines for precast construction of equivalent monolithic reinforced concrete
buildings, Tokyo, 2000.
Armouti. N. S . "Seismic Performance of Precast Structural Walls." Ph.D. Thesis, Lehigh University. Bethlehem. PA.1993, 350 pp.
Aschheim, M., and Baldwin, J., "Analytical Assessment of Seismic Demand in Untopped Diaphragm Shear Connectors," 2000 PCI
Daniel P. Jenny Fellowship Research, University of Illinois at Urbana-Champaign.
Aswad, A .• "Selected Precast Connections: low Cyclic Behavior and Strength," Proceedings of the Second U.S. National Conference
on Earthquake Engincering. Earthquake Engineering Research Institute, Stanford. CA. August 22·24. 1979
Aswad, A., and Jacques, J. October 1983. Lecture 7: Detailed Design of Walls and Connections Post-Tensioning Alternative, Planning
and Design of a Precast Bearing Wall Building, Preprints for PCI Seminar. Chicago, IL: Prestressed Concrete Institute.
ATC-8 Design of Prefabricated Concrete Buildings for Earthquake Loads." Workshop sponsored by National Seismic Foundation. Los
Angeles. CA. December 1981.
Athol. J Carr. Ruaumoko, Inelastic Dynamic analyses.
Becker, J . M . Ll orente, C" and Mueller, P., "Seismic Response of Precast Concrete Walls." Earthquake Engineering and Structural
Dynamics .V. 8, No.6. November· December 1980, pp. 545-564.
Becker, J. M . and Llorente, C, ''The Seismic Response of Simple Precast Concrete Panel Walls," Proceedings of U.S. National
Conference on Earthquake Engineering, Stanford , CA. 1979.
Becker, J. M .. October 1983. Lecture 1: Introduction and Problem Statement, Planning and Design of a Precast Bearing Wall Building,
PCI Seminar Preprints. Prestressed Concrete Institute: p. 5.
Beskos, S.A. Anagnostopoulos. Computer Analysis and Design of earthquake resistant structures, handbook
Biggs, Introduction to Structural Dynamics. McGraw-Hill Book Company, New York, 1964.
Billings, I. J., and Thom, G. W., ―NZI Centre-Design of Multi-Storey Towers,‖ Proceedings of Pacific Concrete Conference,V. 1,
Auckland, New Zealand, November 1988, pp. 309-318.
Blume, N. M. Newmark, and L. H. Corning, ―Design of Multistory Reinforced Concrete Buildings for Earthquake Motions,‖ Portland
Cement Association, Skokie, Illinois, 1961.
Bockemohle, L. W., ―A Practical Paper on Design of Topped Concrete Diaphragms and Precast Concrete Structures,‖ Proceedings,
Workshop on Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, Redwood City, CA,
1981.
Cao, L.; Naito, C.; and Sause, R., ―Phase 1 Experimental Evaluation of Diaphragm Connections: Program Overview,‖ Report by
DSDM LU Group, Lehigh University, Bethlehem, PA, 2005.
Carr. A. J.. "Ruaumoko Program for Inelastic Dynamic Analysis -Uscrs Manual." Department of Civil Engineering. University of
Canterbury. Christchurch. New Zealand. 1998.
Cheok G. S and Lew. H. S "Performance of 1/J Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic
Inelastic Loads." Report NlSTIR 4433, National Institute of Standards and Technology, Gaithersburg, MD, 1990. 94 pp.
Cheok G. S and Lew. H. S "Performance of I/3 scale Model Precast Concrete beam column connections Subjected to Cyclic Inelastic
Loads ." of First Meeting of the Joint Technica1 Coordination Committee on Struc:tum Diego, CA,1990. 104.
Cheok G. S and Lew. H. S "Performance of llJ Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic
Loads - Report No.2," Report NIST IR 4589, National Institute of Standards and Techno logy, Gaithersburg, MD, 1991 ,77 pp.
Cheok G. S and Stone. W. c. "Performance of I/J Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic
Inelastic Loads - Report No.3," Report NISTIR 5246, National Institute of Standards and Technology, Gaithersburg. MD. 1993, 129 pp.
Cheok, G., and Stone, W., ―Performance of 1/3-Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic
Inelastic Loads—Report No. 4,‖ NISTIR 5436, National Institute of Standards and Technology (NIST), Gaithersburg, MD, June 1994.
Cook, R. D., D. S. Malkus, and M. E. Plesha. 1989. Concepts and Applications of Finite Element Analysis. 3rd ed. New York, NY: J.
Wiley & Sons.
Dame, Notre Dame, IN, November 2001, 259 pp. (available for download at http://www.nd.edu/~concrete)
Davies, Go, Elliott. K. S., and Omar, W .. "Horizontal Diaphragm Action in Precast Concrete Floors," The Structural Engineer
(London). V. 68. No.2. January t990, pp. 25-33.
Day, S., "Cyc[ic Load Testing of Precast Hybrid Moment Frame Connections," MSCE Thesis. Department of Civil Engineering,
University of Washington, Seallle, WA, 1999.
design Partially Prestressed precast concrete ductile moment Relisting Frames," Proceedings of the Technology Conference, ATC-8,
Los Angeles, California, April29
Dowrick, D.J., Earthquake Resistant Design, A Manual for Engineers and Architects, Jbhn Wiley & Sons, 1977, 160.
DSDM, 2006, Year 2 Report to National Science Foundation, (NSF) GOALI Project ―Development of a Precast Floor Diaphragm
Seismic Design Methodology (DSDM)‖, Aug 17, 2006.
DSDM, Meeting Minutes, RM#1, Chicago, IL, August 7, 2003, http://central.nees.org
Ehllorsi. M . "Seismic Design of Precast Walls," M.S. Thesis. Department of Civil Engineering and Engineering Mechanics, McMaster
University,Hamilton. Ontario, Canada. 1994.193 pp.
EI-Sheikh, M. Sause, R., Pessiki, S. Lu. L-W. and Kurama, Y., "Seismic Analysis, Behavior and Design of Unbonded Post-Tensioned
Precast Concrete Frames," PRESSS Report No. 98/04 (also Report No. EQ-97-02), Department of Civil and Environmental
Engineering, Lehigh University, Bethlehem, PA, November 1997.
EI-Sheikh, M., "Seismic Analysis, Behavior. and Design of Unbonded Post-Tensioned Precast Concrete: Frames." Ph.D. Dissertation.
Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, October 1997, 456 pp.
Elliot. K. S Davies, G .. and Mahdi. A. A "Semi-Rigid Joint Behavior on Columns in Precast Concrete Buildings." COST CI Proceedings
of First Workshop. Semi-Rigid Behavior of Civil Engineering Structural Connections , E.N.S.A. I. S. , Strasbourg, France, 1992, pp.
282-295.
Englekirk, R. E., "An Evaluation of the State of the Art in the Design and Construction of Prefabricated Buildings in Seismically Active
Areas of the United States," Earthquake Resistant Reinforced Building Construction, June 1978.
Englekirk, R. E., and Seina, L.G. , "Criteria for the Design Concrete Systems," ATc Proceedings of a Workshop on Design of
Prefabricated Concrete Buildings for Earthquake Loads. April 27-29. 198 1. pp. 639-656.
Englekirk:, Art Design and Construction of Prefabricated Buildings in Seismically Active Areas of the United Stales," Earthquake
Resistant Reinforced Building Construction, lune 1978.
Englekirk and M. Pourzanjani, ―High Strength Concrete Applications in Regions of High Seismicity,‖ Proceedings of the Fifth
Conference on Tall Buildings in Seismic Regions, Los Angeles, California, May 5, 2000, pp. 201–217.
Englekirk R E., " St ate-of- the-Art design Perspective" Seminar on Precast Concrete Construction in Seismic Zones. Japan Concrete
institute. Tokyo, October 1986. 1-1.
Englekirk, G. C. Hart, and the Concrete Masonry Association of California and Nevada, Earthquake Design of Concrete Masonry
Buildings, Volume 1. Prentice Hall, Englewood Cliffs, New Jersey, 1982.
Englekirk, R. and C .C "Earthquake Design of Concrete masonry buildings, Volume 2 strength Design of one to for story buildings,
Prentice-Hall. Inc., Englewond Cliffs. ;.Je .... Je(!ie)'. 19&1.
Englekirk, R. E., "Concepts for the Development of Earthquake Resistant Ductile Frames of Precast concrete", Proceedings,
US/Japan Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan 29·31. 1986.pp. 171- 190.
Englekirk, R., and Beres, A., "The Need to Develop Shear Ductility in Prestressed Members," Concrete International, V. 16, No. 10,
October 1994, pp. 49-56.
Englekirk. E .'' towards more effective Use of Precast Concrete Cladding," proceedings architectural precast Concrete cladding- its
contribution to lateral resistance of Buildings. Precast/Presrressed Concrete Institute, Chicago, IL,I990.pp.4- 13.
Fajfar, P., and Krawinkler, H. (Editors), ―Seismic Design Methodologies for the Next Generation of Building Codes,‖ Proceedings of an
International Conference at Bled, Slovenia,A. A. Balkema, Rotterdam/Brookfield, 1997, 411 pp.
Fajfar, P., and Krawinkler, H., ―Performance-Based Seismic Design Concepts and Implementation,‖ Proceedings of the International
Workshop, Bled, Slovenia, June 28-July 1, 2004, Pacific Earthquake Engineering Research Center (PEER) Report, 2004.
Farrow, K. T., "Dynamic Response of Perimeter Lateral-System Structures with Flexible Diaphragms," Master's Thesis, Department of
Civil Engineering and Geological Sciences, University of Notre Dame, Notre Dame, IN, December 2000.
Farrow, K., and Kurama, Y., ―Capacity-Demand Index Relationships for Performance-Based Seismic Design,‖ Structural Engineering
Research Report #NDSE-01-02, Department of Civil Engineering and Geological Sciences, University of Notre
Farrow, K., and Kurama, Y., ―SDOF Demand Index Relationships for Performance-Based Seismic Design,‖ Earthquake Spectra,
Earthquake Engineering Research Institute, Berkeley, CA, V.19, No. 4, November 2003, pp. 799-838.
Federation Internationale de la Precontrainte. Precast Hollow-Core Floors, Thomas Telford . London.1988,31 pp.
FIB (1994): Planning and Design Handbook on Precast Building Structures, SETO Ltd, London, England, 1994, 138 pp.
Fintel, Mark, "Shear Walls - An Answer for Seismic Resistance?" Concrete International, V. 13, No.7, July 1991, pp. 48-53.
Fintel, Mark, and Ghosh, S. K., "Application of Inelastic Response History Analysis in the seismic Design of a 31-Story Frame Wall
Building, "Earthquake Engineering and Structural Dynamics, V. 9, No.8, November- December 1981, pp. 543-556 (PCA Publication
RP256.01D).
Fintel, Mark, and Ghosh, S. K., "Inelastic Aseismic Design of a Reinforced Concrete Coupled Wall Structure," Journal of Civil
Engineering Design, V. 2, No.1, 1980, pp. 45-61.
FIP Recommendations, "Design of Multistory Precast Concrete Struc·46 lUres, Thomas Telford, London, United Kingdom, 1987.
FIP Recommendations. "Precast Prestressed Hollow Cored Floors." FIP Commission on Prefabr ication. Thomas Telford. London.
United Kingdom, 1987.
French, C. W . Hafner, M., and Jayashankar. V ." connection between precast elements Failure Within Connection Region," Journal
Engineering. American Society of Civil Engineers. 115.No. 12. December 1989, pp. 3171-3 192.
French. C. W .. Olanrewaju, A .. and Charbe T . "Connections Between Precast Elements - Failure Outside Connection Region."
ASCE Journal of Structural Engineering. V. 115. No.2. February 1989, pp. 316-340.
Galusha, J. G.; 999. Precast, Post-tensioned Concrete Walls Designed to Rock. MSCE Thesis, University of Washington, Seattle, W
A, 103p.
Gates, W. E., "Seismic Design Considerations for Untopped Precast Concrete Floor and Roof Diaphragms," Proceedings, Workshop
on Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, Washington, DC, 1981.
Ghali, R Favre and M Elbadry. Concrete Structures, Stresses and deformation.
Guide for Design and Prefabrication of Precast Reinforced Concrete Structures," Japanese Association. 198ft
Guidelines for the Use of Structural Precast Concrete in Buildings,‖ Report of a Study Group of the New Zealand Concrete Society and
the New Zealand National Society for Earthquake Engineering, Centre for Advanced Engineering, University of Canterbury, New
Zealand, First Edition, August 1991, 174 pp., and Second Edition, December 1999, 143 pp.
Herlihy, M. D., and Park, R., ―Detailing Precast Flooring Systems to Survive Loss of Support,‖ Proceedings of the Annual Technical
Conference of the New Zealand Concrete Society, October 1996, pp. 130-139.
Hicks, T. R., "Connections Between Precast Concrete Members for Use in Seismic Zones," Thesis submitted to the University of
Washington in partial fulfillment for the MSCE degree, 1990. .
Holden, T., Restrepo, J., and Mander, J., ―A Comparison of the Seismic Performance of Precast Wall Construction: Emulationand
Hybrid Approaches,‖ Rep. No. 2001-4, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand, 2001.
Holden, T., Restrepo, J., and Mander, J., ―Seismic Performance of Precast Reinforced and Prestressed Concrete Walls,‖ Journal of
Structural Engineering, ASCE, V. 129, No. 3, March 2003, pp. 286-296.
International Conference of Building Officials. Code Central - Earthquake Spectral Acceleration Maps, prepared in conjunction with
U.S. Geological Survey; Building Seismic Safety Council; Federal Emergency Management Agency; and E.V. Leyendecker, A.D.
Frankel, and K.S. Rukstales. Whittier, CA (CD-ROM).
Jacelues. and Aswad, A " Seismic Design of Panel Systems Using Vertical Post Tensioning," , Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan October 29031,
Jayashankar. V .. and French. C. E., ··An Interior Moment Resistant Connection Between Precast Elements Subjected to Cyclic
Lateral Loads:' Structural Engineering Report No. 87·/0. University of Minnesota. Minneapolis. MN, May 1988.
Johal, L.S., and Hanson, N.W. November 1978. Horizontal Joint Tests, Supplemental Report B on the Design and Construction of
Large Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Ju, SH, and Lin, MC. 1999, ―Comparison of Building Analyses Assuming Rigid or Flexible Floors,‖ ASCE Journal of Structural
Engineering V.125 No.25.
Kanaan. A. E., and Powell. G. H .."DRAIN-2D: A General Purpose Computer Program for Dynamic Analysis of Inelastic Plane
Structures:' Earthquake Engineering Research Center. EERC 73-6. 73-22. University of California, Berkeley, CA, 1973.
Kashiwazaki, T., and H. Noguchi. 2000.Structural Performances of Prestressed Concrete Interior Beam-Column Joints In
Proceedings of the 12th World Conference on Earthquake Engineering (12WCEE), Auckland, New Zealand, January 30–February 4,
2000, Paper No. 2342.
Kianoush, M. R . and Scanlon. A . "Analytical Modeling of Large Panel Coupled Walls for Seismic Loading," Canadian loumaf of eMf
Engineering, V. IS, 1988, pp. 623-632.
Kitayama, K ., Otani, S., and Aoyama, H., "Development of Design Criteria for RC Interior Beam-Column Joints:' Design of Beam-
Column Joints for Seismic Resistance. ACI Special Publication SP-123, American Concrete Institute, Detroit, MI. 199 1, pp. 97-123.
Kripanarayanan, K.M., and Fintel, M. August 1976. Wall Panels: Analysis and Design Criteria, Report NO.3 on the Design and
Construction of Large Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M. ―Analytical Modeling and Lateral Load Behavior of Unbonded Post-
Tensioned Precast Concrete Walls,‖ Research Report No.EQ-96-02, Department of Civil and Environmental Engineering, Lehigh
University ,Bethlehem, PA, 1996, 191 pp.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M."Seismic Design and Response Evaluation of Unbonded Post-
Tensioned Precast Concrete Walls, PRESSS Report No. 98/03. Bethlahem, PA: Lehigh University.
Kurama, Y., Sause, R, Pessiki, S., Lu, L.W., and EI-Sheikh, M., "Seismic Design and Response Evaluation of Unbonded Post
Tensioned Precast Concrete Walls," Research Report No. EQ-97-01, Department of Civil and Environmental Engineering, Lehigh
University, Bethlehem, PA, November 1997, 184 pp.
Kusumo. Rllhardjo. F. L. "Behavior and Design of Connectors for Precast Double-Tee Members." M.S. Independent Study Report,
University of Wisconsin, Madison. WI. May 1996.
LATERALJ Version 2. 10, Static Lateral Analysis is Program for Wind and Seismic Loading, Jacques & Aswad, Inc .• Denver.CO.
1993.
Lee, H.J., and Kuchma, D.A., 2007, ―Seismic Overstrength of Shear Walls in Parking Structures with Flexible Diaphragms,‖ Journal of
Earthquake Engineering, V.11, No.1 Jan., pp. 86-109.
Lee, H.J., Aschheim, M.A., and Kuchma, D., 2008, ―Interstory Drift Estimates for Low-Rise Flexible Diaphragm Structures,‖
Engineering Structures (In Press.
Lee, H.J., Kuchma, D.A., and Aschheim, M.A.,2008, ―Strength–Based Design of Flexible Diaphragms in Low-Rise Structures Subject
to Earthquake Loading,‖ Engineering Structures (In Press).
Libby, J. R., Modern Prestressed Concrete: Design Principles and Construction Methods, 4th ed., Van Nostrand Reinhold, New York,
1990.
Lin, C. M., and Restrepo, J., ―Seismic Behavior and Design of Reinforced Concrete Interior Beam-Column Joints,‖ Bulletin of the New
Zealand Society for Earthquake Engineering, V. 35, No. 2, June 2002, pp. 108-128.
Lin, J. I. Restrepo, and R. Park, ―An Alternative Design Method for Interior Beam-Column Joints of Reinforced Concrete Moment
Resisting Frames,‖ NZNSEE Conference, Wairakes, Taupo, New Zealand, March 1997.
Low. S-G. Buo, X . Einca. A., Tadros. M. K .• and Salmon, D. C., " Inelastic Dynamic Analysis of a Precast Concrete Office Building
Subjected to Moderate Seismicity:' Proceedings. Sevcnth Canadian Conference on Earthquake Engineering. M on tr~a l. Qu~b
ec,Canada, June 1995, pp. SO I-508.
MacRae, O. A., and Priestley, M. J. N., " Precast Post ·Tensioned Un grouted Concrete Beam Column Subassemblage Tests,"
Structural Systems Research Report No. SSRP 9411 0, University of California at San Diego, La Jolla, CA, March 1988,124 pp.
Maison. B. F . "PC-ANSR: A Computer Program for Non-Linear Structural Analysis." University of California. Berkeley. CA. 1992.
Mander, J., Priestley, M., and Park, R., "Theoretical Stress Strain Model for Confined Concrete," Journal of Structural Engineering,
American Society of Civil Engineers, V. 114, No.8, August 1988, pp. 1804-1826.
Mander, J., Priestley, M., and Park, R., ―Observed Stress-Strain Behavior of Confined Concrete,‖ Journal of Structural Engineering, V.
114, No. 8, August 1988, pp. 1827-1849.
Maund. T. J., "Seismic Behavior of Diaphragms in Parking Garages." Thesis submitted in partial ful61lment of the requirements fCX'
the MSCE degree. Department of Civil Engineering, University of Washington. Seattle. WA. 1995.
Moehle, J. P. 1992. Displacement-Based Design of RC Structures Subjected to Earthquakes. Earthquake Spectra, V. 8, No. 3: pp.
403–428.
Mole, A .. "Seismic Response of Hybrid Connections in Precast Concrete Frames," MSCE Thesis, University of Washington, Seattle,
WA, 1994, 147 pp.
Mueller P., "Behavioral Characteristics of Precast Wall s:' Proceedings of a Workshop on Design of Prefabricated Concrete Buildings
for Earthquake Loading, Applied Technology Council. April 198 1, pp. 277·308.
Mueller, P., "Experimental Investigation on the Seismic Performance of Precast Walls," Ninth World Conference on Earthquake
Engineering, Tokyo-Kyoto, Japan, V. IV, 1988, pp. 755-760.
Mueller, P., and Becker, J.M. October 1979. Seismic Response of Large Panel Precast Concrete Buildings, Advanced Design
Concepts Seminar, PCI Convention, Dallas, TX.
Mueller. P., "Hysteretic Behavior of Precast Panel Walls," , Proceedings, US/Japan Seminar on Precast Concrete Construction in
Seismic zones Tokyo, Japan October 29-31, 1986.
Murphy, G . Advanced Mechanics of Materials, McGraw-Hili Book: Company, Inc., New York:, NY, 1946.
Naeim, Farzad, The Seismic Design Handbook, 200 Ed., Kluwer Academic Publishers, Boston, 2001, p.376.
Naito, C., and Cao, L., ―Precast Diaphragm Panel Joint Connector Performance,‖ Paper 2722, Proceedings, 13th World Conference
on Earthquake Engineering, Vancouver, Canada, August 2004.
Naito, C., Peter, W., and Cao, L., 2006, ― Development of a Seismic Design Methodology for Precast Diaphragms, Phase 1 Summary
Report‖, ATLSS Report No. 06-03, Lehigh University, Bethlehem, PA, Jan.
Naito, C., R. Ren, C. Jones, and T. Cullen. 2007. PCI/ NSF Development of a Design Methodology for Precast Concrete Diaphragms:
Connector Performance Phase 1B. ATLSS report 07-04, Lehigh University, Bethlehem, PA.
Nakaki, S. D., "Design Guidelines for Precast and Cast-inPlace Concrete Diaphragms," Technical Report, EERI Professional
Fellowship, Earthquake Engineering Research Institute, Berkeley, CA, April 2000.
Nakaki, S. D., "Design Guidelines for Precast and Cast-in-Place Concrete Diaphragms," The 1998 NEHRP Professional Fellowship
Report, Earthquake Engineering Research Institute, Berkeley, CA, 1998.
Nawy, Fundamentals of High Performance Concrete, 2nd Edition. JohnWiley &Sons, New York, 2001.
New Zealand Concrete Society and New Zealand Society for Earthquake Engineering. 1999. Guidelines for the Use of Structral
Precast Concrete in Buildings, 2nd Edition. Christchurch, New Zealand: University of Canterbury.
Nishiyama, M., F. Watanabe, and H. Muguruma. 1991. Seismic Performance of Prestressed Concrete Beam-Column Joint
Assemblages. In Proceedings of the Pacific Conference on Earthquake Engineering, New Zealand, 20–23 November 1991, pp.
217–228.
Nishiyama, M., F. Watanabe, and H. Muguruma. 1994. Which Should Be Adopted as a Building System in Seismic
Regions—Prestressed Concrete or Reinforced Concrete? In FIP ‘94 XII Congress: May 29–June 2, Washington D.C., V. 1, pp.
E28–E39.
Nonlinear Mechanics of Reinforced Concrete By K. Maekawa
O‘Grady, C. R., ―Precast Cruciform Columns, H-Frames and Precast Concrete Shear Walls in Building Construction,‖ Proceedings of
the Pacific Concrete Conference, V.‑1, Auckland, New Zealand, November 1988, pp. 345-354.
O‘Leary, A. J., Monastra, D. P., and Mason, J. E., ―A Precast Concrete Moment Resisting Framing System,‖ Proceedings of the Pacific
Concrete Conference, V. 1, Auckland, New Zealand, November 1988, pp. 287-298.
Oliva, M. G., "Testing of the lVI Flange Connector for Precast Concrete Double-Tee Systems," Structures and Materials Test Lab
Report, University of Wisconsin-Madison, Madison, WI, lune 2000 [www.jvi-inc.com].
Oliva, M. G., ―Pilot Testing of JVI V-2 Flange Connectors for Precast Concrete Double-Tee Systems,‖ Structural and Materials Test
Laboratory Report, University of Wisconsin, Madison, WI, June 2002, 12 pp.
Oliva, M. G., ―Testing of the Shear-Loc Flange Connector for Precast Double- Tee Systems,‖ Structural and Materials Test Laboratory
Report, University of Wisconsin, Madison, WI, May 1999, 26 pp.
Oliva, M. G., ―Tests on Tindall Bent Plate Flange Connector,‖ Structures and Materials Test Laboratory Report, University of
Wisconsin, Madison, WI, June 1997, 7 pp.
Paulay .(1999). ―A Simple Seismic Design Strategy Based on Displacement and Ductility Compatibility‖, Earthquake Engineering and
Engineering Seismology, Vol.1 No.1
Paulay, ―The Design of Ductile Reinforced Concrete StructuralWalls for Earthquake Resistance,‖ Earthquake Spectra, Vol. 2, No. 4,
1986.
Paulay, T., and Bull , I. N .. "Shear Effect on Plastic Hinges of Earthquake Resisting Reinforced Concrete Frames," Bulletin D'
information 132.Comite Euro-International du Beton,1979, pp. 165- 172
Paulay, T., and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, New York,
NY, 1992.
Paulay. T . and Binney. 1. R . "Diagonally Reinforced Coupling Beams of Shear Wall!> - Shear in Reinforced Concrete," Special
Publication 42. American Concrete Institute. Farmington Hills. MI. 1974. pp . 579-599.
Paulay. T . and Santhankumar. A. R .Ductile Behavior of Coupled Shear Walls:' Journal of the Structural Division. American Society of
Civil Engineers. V. 102. 1976. pp. 93-108.
PCI, Request for Proposal (RFP), ―Development of a Design Methodology for Precast Diaphragms,‖ Precast/Prestressed Concrete
Institute, Chicago, IL, October 2002.
Perez, F. J., ―Lateral Load Behavior and Design of Unbonded Post-Tensioned Precast Concrete Walls with Ductile Vertical Joint
Connectors,‖ M.S. Thesis, Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, December 1998,
201 pp.
Perez, F. J., Pessiki, S., and Sause, R. May 2004. Experimental and Analytical Lateral Load Response of Unbonded Post-Tensioned
Precast Concrete Walls, ATLSS Report No. 04-11. Bethlehem, PA: Lehigh University.
Perez, F. J., Pessiki, S., and Sause, R., ―Lateral Load Behavior and Design of Unbonded Post-Tensioned Precast Concrete Walls with
Ductile Vertical Joint Connectors,‖ Center for Advanced Technology for Large Structural Systems (ATLSS) Report No. 99-01, Lehigh
University, Bethlehem, PA, January 1999, 127 pp.
Perez, F. J., Pessiki, S., Sause, R., and Lu, L.-W., ―Lateral Load Tests of Unbonded Post-Tensioned Precast Concrete Walls,‖ SP-211-
8, American Concrete Institute, Farmington Hills, MI, 2003, pp. 161-182.
Planning and Design of a Precast Bearing Wall Building. October 1983. Preprints for PCI Seminar. Chicago, IL: Prestressed Concrete
Institute.
Popoff, Alexander, Jr. 1993. What Do We Need To Know About the Behavior of Structural Concrete Shear Wall Structures, Response
of Multistory Concrete Structures to Lateral Forces, SP-36. Detroit, MI: American Concrete Institute.
Powell, ―DRAIN-2DX, Element Description and User Guide for Element Type 01, Type 02, Type 04, Type 06, Type 09, and Type 15,‖
Version 1-10, Report No. UCB/SEMM-93/18, Department of Civil Engineering, University of California at Berkeley,Berkeley, California,
December 1993.
Qi, X., and Moehle, J., ―Displacement Design Approach for Reinforced Concrete Structures Subjected to Earthquakes, ‖Report No.
EERC 91/02, Earthquake Engineering Research Center, University of California, Berkeley, CA, 1991.
Ragupathy. R., "Semi-Rigid Connections in Precast Concrete Frames," Ph.D. Thesis. City University, Northampton Square, London,
United Kingdom, 1993.
Rahman, A., and Restrepo, J., ―Earthquake Resistant Precast Concrete Buildings: Seismic Performance of Cantilever Walls
Prestressed Using Unbonded Tendons,‖ Report No. 2000-5, Department of Civil Engineering, University of Canterbury, Christchurch,
New Zealand, 2000.
Raymond, W., ―Efficient Use of Structural Precast Concrete in High Rise Buildings – A Case Study,‖ Transactions of the Institution of
Professional Engineers New Zealand, V. 19, No.1/CE, November 1992, pp. 21-27.
Restrepo, J. and Schoettler, M., ―DSDM Report on Ground Motions,‖ https://central.nees.org/
Restrepo, J. Crisafulli, F., and Park, R., ―Earthquake Resistance of Structures: The Design and Construction of Tilt-Up Reinforced
Concrete Buildings,‖ Research Report 96-11,Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand,
September 1996.
Restrepo, J. Crisafulli. F. 1. and Park. R., . Earthquake Resistance of Structures: The Design and Construction of Tilt Up Reinforced
Concrete Buildings," Research Report 96-11.Department of Civil Engineering, University of Canterbury. Christchurch, New Zealand,
\996.
Restrepo, J. Park, R., and Buchanan, A. H., "The Seismic Behavior of Connections Between Precast Concrete Elements," Research
Report No. 93-1Department of Civil Engineering. University of Canterbury, Christchurch ,New Zealand, April 1993.
Restrepo, J. Park. R., and Buchanan. A. H .. "The Seismic Behavior of Connections Between Precast Concrete EIements_" Research
Report No. 93/3.Department of Civil Engineering. University of Canterbury. Christchurch. New Zealand. 1993.
Restrepo, J.―Self-Centering Precast Post-Tensioned Cantilever Walls—Theory and Experimental Work,‖ ASCE Structures Congress,
Seattle, WA, May 29-31, 2003.
Restrepo, J.and A. Rahman. 2007. Seismic Performance of Self-Centering Structural Walls Incorporating Energy Dissipators. Journal
of Structural Engineering, V. 133, No. 11 (November): pp. 1560–1570.
Restrepo, J.and Park. R., "Review of Tilt Up Construction Details," Proceedings. Annual Technical Conference of New Zealand
Concrete Society, Auckland, New Zealand, October 1993, pp. 38-43
RISA-2D Version 3.0, Rapid Interactive Structural Analysis in 2-Dimensions. RISA Technologies. Lake Forest, CA.1992.
Rubenstein and W. C. Hurty, Dynamics of Structures. Prentice Hall, Englewood Cliffs, New Jersey, 1964.
S. Stanton. J. F .. and Nakaki. S. D .. ··PRESSS Industry Seismic Work-shops:' PRESSS Research Repon 9112, University of
California al San Diego. San Diego. CA. 1991.
S.(sri) Sriharan, M.J.Nigel Priestley, Frieder Seible and Akira Igarachi (12 WCEE 2000). A five-storey Precast concrete test building
for seismic conditions and overview
Salmon, C. G., and Johnson, J. E., Steel Structures Design and Behavior, Fourth Edition, Harper Collins College Publishers
Schricker. V . and Powell, G. H., "Inelastic Seismic Analysis of Large Panel Buildings," Report No .UCBIEERC/80/38, College of
Engineering, University of California a, Berkeley. CA, 1980.
Schultz, A. E .. and Magana, R. A .. "Seismic Behavior of Connections in Precast Concrete Walls," Paper No. SPI62+12, Mete A.
Sozen Sympo-sium, ACI SP 162. American Concrete Institute, Fannington Hills, Ml. 1996, pp. 273·31 I.
Schultz, A. E., Tadros. M. K. Huo. X. and Magana. R. "Seismic Resistance of Vertical Joints in Precast Shear Wall Panels,"
Proceedings of the FIP 1994 XII Congress. Washing-ton, D.C. May-June 1994. 17 pp.
Schultz, D.M. March 1979. Design Methodology, Report NO.6 on the Design and Construction of Large Panel Concrete Structures.
Skokie, IL: Portland Cement Association.
Schultz, D.M., and Fintel, M. April 1975. Loading Conditions, Report NO.1 on the Design and Construction of Large- Panel Concrete
Structures. Skokie, IL: Portland Cement Association.
Schultz, D.M., Burnett, Eric F. P., and Fintel, Mark. October 1977. Design and Construction of Large-Panel Concrete Structures Report
4: A Design Approach to General Structural Integrity. Skokie, IL: Portland Cement Association.
Schultz, D.M., Johal, L.S. January 1979. Derecho, A.T., and Iqbal, M. Special Topics, Report No.5 on the Design and Construction of
Large-Panel Concrete Structures. Skokie, IL: Portland Cement Association.
Schultz.. A. E .. Magana. R. A .. Tadros.M. K .and Huo. X .. "Experimental Study of Joint Connections in Precast Concrete Walls,"
Proceedings. Fifth U.S. National Conference on Earthquake Engineering. Chicago. IL. July10-14. 1994.
Scoggin, H. L., and Pfeiffer, D. W., ―Cast-in-Place Concrete Residences with Insulated Walls-Influence of Shear Connectors on
Flexural Resistance,‖ Journal of the PCA Research and Development Laboratories, V. 9, No. 2, 1967, pp. 2-7.
Seible. F., Priestley. M. 1. N .. Kurkchubasche. A .. and Kingsley. G. R . "Seismic Response of 5-Story Full-Scale Reinforced Masonry
Building. Pan 11." Journal of the Structural Division. ASCE. V. 120. No.3, March 1994. pp. 925-946.
Seminar on Precast Concrete Construction in Seismic Zones." Japan Society for the Promotion of Science/National Science
Foundation. Volumes 1. \-1. 2. Tokyo. Japan. October 29·31. 1986.
Sezen, H., and A. S. Whittaker. 2006. Seismic Performance of Industrial Facilities Affected by the1999 Turkey Earthquake. Journal of
Performance of Constructed Facilities, V. 20, No. 1: pp. 28–36.
Shaikh, A. F., and Feile, E. P., ―Report on the Results of Laboratory Testing of JVI Vector Connector for Precast Double-Tee
Members,‖ University of Wisconsin-Milwaukee, Milwaukee, WI, 2002.
SLanton. J. F., MacRae, G .. Sugata, M .. and Day, S., ·'Preliminary Test Report of a Hybrid Frame Exterior Beam Column Specimen
Test," University of Washington, Seattle, WA, March 1999.
Suc na.ga. Y., "Design Guideline for Precast Concrete structures in Japan, Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, October 29-3 1, 1986,pp. I-20.
Svensson, S., "Diaphragm Action in Precast Hollow-Core Floors," The Nordic Concrete Federation. Nordic Concrete Research.
Publication No. 4, 1985, pp. 179-19 1.
SWANSA Computer Program, Department of Civil Engineering, City University. Nonhampton Square, London, United Kingdom.
Tadros, M. K .. Einea, A .. Low, S-G ..and Huo. X., "PRESSS - Behavior of a Six-Story Office Building Under Moderate Seismicity."
Final report submitted to the National Science Foundation. July 1995, 148 pp.
Tadros, Magana, and Schultz, A. E. 1966. "Design and Behavior of Connections in Precast Concrete Shear Walls," Paper No. 1738,
Proceedings. Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico: Elsevier Science Ltd.
Tadros. M. K., Schu h z. A. E .. and Magana. R. A .. "Behavior of a Six ·Story Office Building Under Moderate Seismicity," Third
Meeting of the U.S,.Japan Joint Technical Coordinating Committee on Precast Seismic Structural Systems (lTCC-PRESSS),San
Diego. CA. November 1992,49 pp.
Takeda t "Design and Construction of High rise precast Concrete structures in Japan" Abstract of special Lecture Among Pre-Seminar
Lectures on Precast Construction in Seismic Zones. Japan Concrete Institute, Tokyo, Japan, October 28, 1986, pp.
Takeda, T., SOl.en, M .. and Niclsen, N . "Reinforced Concrete Response to Simulated Earthquakes:' JOllmol SlruClures Divi-sion.
ASCE. v. 96. No. 12, December 1970.
The Seismic Design Handbook By Farzad Naeim
The Structural Design of Tall Buildings, Vol. 1, 57-72: John Wiley & Sons, 1972.
Thomas, D. J. 2003. Analysis and Validation of a Seismic Design Method Proposed for Precast Jointed Wall Systems. Master Thesis,
Iowa State University, Ames, Iowa.
Thomas, D. J., and Sritharan, S. June 2004. An Evaluation of Seismic Design Guidelines r:for Precast Jointed Wall Systems, ISU-ERI-
Ames Report ERI-04643. Ames, IA: Iowa State University.
Thompson, K. J., and Park, R., "Ductility of Concrete Frames Under Seismic Loading," Department of Civil Engineering Report 75-14,
University of Canterbury, New Zealand, October 1975.
Thomsen, IV and J. W. Wallace, ―Displacement-Based Design of RC Structural Walls: Experimental Studies ofWalls with Rectangular
and T-Shaped Cross Sections,‖ Report No. CU/CEE-95-06, Department of Civil and Environmental Engineering, Clarkson University,
Potsdam, New York, 1995.
Timoshenko, S. P., and J. N. Goodier. 1970. Theory of Elasticity. 3rd ed. New York, NY: McGraw-Hill.
Timoshenko, S., and Young. 1968. D.H. Elements of Strength of Materials. New York: Van Nostrand Reinhold Company, pp. 125-137.
u.TERAL3 Vmion 2.10, Static Laterul Analysis Program for Wind and Seismic Loading, Jacques & Aswad, Inc . Denver, CO, 11}}3.
United States Geological Survey. Event 14366244. pasadena.wr.usgs.gov/shake/ca/STORE/X14366244/ ciim_display.html.
V. Ciampi, R. Eligenhausen, V. Bertero, and E. Popov, ―Analytical Model for Concrete Anchorages of Reinforced Bars Under
Generalized Excitations,‖ EERC Report No.UCA/eerc 82/83, University of California, Berkeley, November 1982.
Virdi. K .. and Ragupathy. R., "Analysis of Precast Concrete Frames with Semi- Rigid Joints," Proceedings of the First State of the An
Workshop, COST C I. Slrasbourg. France. 1992, pp. 296-307.
Wallace and J. H. Thomsen, IV, ―Seismic Design of RC Structural Walls. Part II: Applications,‖ Journal of Structural Engineering,
ASCE, Vol. 121, No. 1, January 1995.
Wallace, ―Ductility and Detailing Requirements of Bearing Wall Buildings, Journal of Structural Engineering, ASCE, Vol. 118, No. 6,
June 1992.
Wallace, J., ‖BIAX User Manual―A Computer Program for the Analysis of Reinforced Concrete Sections,‗ University of California at
Berkeley, Berkeley, CA, 1989
Wang. C. K . Intermediate Structural Analysis. Chapter 20. McGraw-Hill.1983..
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests,‖ Report No. TR-97/10,
University of California, San Diego, July 1997.
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests,‖ Report No. TR-98/01,
University of California, San Diego, January 1998.
Warcholik and M. J. N. Priestley, ―Structural Systems Research Project: High Strength Concrete Joints Tests—Series 3,‖ Report No.
TR-98/12, University of California, San Diego, July 1998.
Wiss, Janney and Elstner, "Cyclic and Monotonic Shear Tests on Connections Between Precast Concrete Panels," Report No. WJE
77578, for Prof. 1. Becker, MIT, July 1981.
Yu. C . "Seismic Design of Precast Coupled Walls." M.S . Thesis, Department of Civil Engineering, Pennsylvania State University.
1992. 134 pp.
Zheng, W., ―Analytical Method for Assessment of Seismic Shear Capacity Demand for Untopped Precast Double- Tee Diaphragms
Joined by Mechanical Connectors,‖ Ph.D. Thesis, The University of Wisconsin, Madison, WI, 2001, 313 pp.
Abdel-Fattah. B. A .. and Wight. J. K., "Study of Moving Beam Plastic Hinging Zones for Earthquake-Resistanl Design of RiC
Buildings:' ACI Structural Journal, V. 84. No. I. January February 1987. pp. 31-39.
Abdul-Wahab, H. M. S., ―Ultimate Shear Strength of Vertical Joints in Panel Structures,‖ ACI Structural Journal, V. 88, No. 2, March-
April 1991, pp. 204-213.
ACI Innovation Task Group 1 and Collaborators, ―Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members (ACI T1.2-XX) and Commentary (T1.2R-XX),‖ ACI Structural Journal, V. 98, No. 5, September-October
2001, pp. 771-784.
ACI-ASCE Committee 550. "Design Recommendations for Precast Concrete Structures," ACI Structural Journal, V. 90. No. I. January-
February 1993. pp. 115·12 1.
AI-Haddad. M. S .. and Wight. J. K ."Relocating Beam Plastic Hinging Zones for Earthquake Resistant Design of Reinforced Concrete
Buildings." ACI Structural Journal. Proceedings. V. 85. No.2. March-April 1988. pp. 123- 133,
Cheok, G., Stone, W., Kunnath, S., ―Seismic Response of Precast Concrete Frames with Hybrid Connections,‖ ACI Structural Journal,
V. 95, No. 5, September-October 1998, pp. 527-539.
Galano L. and A. Vignoli, ―Seismic Behavior of Short Coupling Beams with Different Reinforcement Layouts,‖ ACI Structural Journal,
November-December 2000, pp. 876– 885.
Hawkins. N. M . Lin, I. and Ueda. T ."Anchorage of Reinforcing Bars for Seismic Forces." ACI Structural Journal ,V. 84, NO.5,
September-October 1987, pp. 407-4 18.
Kato, D., Kabeyasawa, T., Otani, S., and Aoyama, H., ―Earthquake-Resistant Design of Shear walls with One Opening,‖ ACI Structural
Journal, V. 92, No. 4, July-August 1995, pp. 495-500.
kin. M .. and Fu. H. C .. "Beam-Column Connections in Precast Reinforced Concrete Construct ion." ACI Structural Journal. V. 87.
No.3. May June 1990. pp. 252-261.
Kurama, Y., "Simplified Seismic Design Approach for Friction- Damped Unbonded Post-Tensioned Precast Concrete Walls," ACI
Structural Journal, V. 98, No.5, September-October 2001, pp. 705-716.
Kurama, Y., ―Seismic Design of Unbonded Post‑Tensioned Precast Walls with Supplemental Viscous Damping,‖ ACI Structural
Journal, V. 97, No. 4, July-August 2000, pp. 648-658.
Kurama, Y., Sause, R., Pessiki, S., and Lu, L. W., "Lateral Load Behavior and Seismic Design of Unbonded Post-Tensioned Precast
Concrete Walls," ACI Structural Journal, V. 96, No.4, July-August 1999, pp. 622-632.
Kurama, Y., Sause, R., Pessiki, S., and Lu, L.-W., ―Seismic Response Evaluation of Unbonded Post-Tensioned Precast Walls,‖ ACI
Structural Journal, V. 99, No. 5, September-October 2002, pp. 641-651.
Lemieux, K., Sexsmith, R., and Weiler, G., ―Behavior of Embedded Steel Connectors in Concrete Tilt-Up Panels,‖ ACI Structural
Journal, V. 95, No. 4, July-August 1998, pp. 400-413.
Mast, R. F .. "Unified Provisions for Reinforced and Prestressed Concrete Aellural and Compression Members," ACI Structural
Journal. V. 89, No.2, March-April 1992. pp. 185-199.
Osanai, Y., Watanabe, F., and Okamoto, S., ―Stress Transfer Mechanism of Socket Base Connections with Precast Concrete
Columns,‖ ACI Structural Journal, V. 93, No. 3, May-June 1996, pp. 266-276.
Paulay, T. 1989. Equilibrium Criteria for Reinforced Concrete Beam-Column Joints. ACI Structural Journal, V. 86, No. 6
(November–December): pp.635–643.
Secki n. M .. an d Fu. H-C.. "Beam Column Connections in Precast Reinforced Concrete Construction," ACI Structural Journal. V. 87.
No.3.May-June 1990, pp. 252-261 and discussions. V. 88. No.2. March-April 199 1. pp. 240-241.
Sittipunt, c., and Wood, S., "Influence of Web Reinforcement on the Cyclic Response of Structural Walls," ACI Structural Journal, V.
92, No. 6, November-December 1995, pp. 745-756.
Stone, W., Cheok, G., and Stanton, 1., "Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections
Subjected to Cyclic Loading," ACI Structural Journal, V.91, No. 2, March-April 1995, pp. 229-249.
Taylor, C., Cote, P., and Wallace, J., ―Design of Slender Reinforced Concrete Walls with Openings,‖ ACI Structural Journal, V. 95, No.
4, July-August 1998, pp. 420-433.
Tsoukantas, S. G .. and Tassios, T. P .."Shear Resistance of Connections Between Reinforced Concrete Linear Precast Elements"
ACI Structural Journal. V. 86, No.3. May-June 1989.pp.242-249.
Zhang Y. and Z. Wang, ―Seismic Behavior of Reinforced Concrete Shear Walls Subjected to High Axial Loading,‖ ACI Structural
Journal, Vol. 97, No. 5, September– October 2000.
AIJ, ―AIJ Recommendations for the Design of Base Isolated Buildings,‖ Architectural Institute of Japan, Tokyo, Japan,1993.
Abdel. Maksoud. M. G . - Relationship Between Performance and Geometric and Mechanical Properties of Concrete Joints Subjected
to Cyclic Shear," Thesis submitted in partial fulfillment of the requirements for (he PhD degree. Department of Civil Engineering.
University of
ACI Committee 408, "Bond Stress The State of Art," ACl Journal. Proceedings, V. 63, No. II , November 1966, pp. 1161 -1190.
ACI Innovation Task Group 1 and Collaborators, "Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members (ACI TI.2-XX) and Commentary (TI.2R-XX) (draft)," Ac/ Structural Journal, V. 98, No. 5, September-
October 2001, pp. 771-784.
ACI Innovation Task Group 1 and Collaborators, ―Acceptance Criteria for Moment Frames Based on Structural Testing (ACIITG/T1.1-
01),‖ American Concrete Institute, Farmington Hills, MI, 2001.
ACI Innovation Task Group 1 and Collaborators, ―Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-
Tensioned Concrete Members,‖ ACI Proposed Standard T1.2-03 and Commentary ACI T1.2R-03, American Concrete Institute,
Farmington Hills, MI, 2003.
ACI Innovation Task Group 5 and Collaborators, ―Acceptance Criteria for Special Precast Structural Walls Based on Validation Testing
and Commentary,‖ Draft, ITG T5.1, American Concrete Institute, Farmington Hills, MI, 2004.
ACI Innovation Task Group I and Collaborators, "Acceptance Criteria for Moment Frames Based on Structural Testing (T1.l -01) and
Commentary (Tl.lR-O I)," American Concrete Institute, Farmington Hills, MI, 2001, 10 pp.
ACI innovation Task Group I and Collaborators, "Special Hybrid Moment Frames Composed of Discrete[y Jointed Precast and Post-
Tensioned Concrete Members (ACI Tl.2-03) and Commentary (ACI Tl.2R-03)," American Concrete Institute, Fannington Hills, MI,
2003.
Adajar, J. C., T. Kanakubo, M. Nonogami, N. Kayashima, Y. Sonobe, and M. Fusisawa. 2004. An Analysis of the Behavior of Hybrid
Steel Beam-RC Column Connection. Paper no. 2398 presented at the 13th World Conference on Earthquake Engineering, Vancouver,
B.C., Canada.
Adlparvar, M. Ro, "Torsional Behavior of Precast Concrete Beams and Connections," Ph.D. Thesis. Univcrsity of Nottingham, United
Kingdom, 1991.
AISC Special Task Committee on the Northridge Earthquake, "Assessing Steel Damage in the Northridge Earthquake ,"Modern Steel
Construe/ion,May pp. 14-18.
Alsiwat, J. M. and Saatciogu, M., ―Reinforcement anchorage slip under monotonic loading‖, Journal of Structural Engineering, V. 118,
No. 9, September 1992, pp. 2421-2438.
Anderson. A. R .• ''Composite Designs in Precast and Cast in Place Concrete." Progressire Architecture, September 1960, pp. 172-
179.
Aoyama, H., ―Earthquake Resistant Design of Reinforced Concrete Frame Buildings with Flexural Walls,‖ in Earthquake Resistance of
Reinforced Concrete Structures, A Volume Honoring Hiroyuki Aoyama, Editor: T. Okada, Department of Architecture, Faculty of
Engineering, University of Tokyo ,Tokyo, Japan, 1993, pp. 78-100.
Backler, A. P .• and Baylik. M ."Local Behavior of Shear Transfer and Compression Transfer Joints - The Behavior of Large Panel
Structures."CIRIA Report 45. London. England. 1973.
Barney. G. B . Shiu. K. N . Rabbal. B. G . Fiorato. A. E. Russell. H. G .and Corley, w. G . "Earthquake Resistant Structural Walls -
Tests of Coupling Beams." Report to National Science Foundation. Portland Cement Association. Skokie. lL. 1978. 58 pp.
Bathe, K. 1" Wilson, E. L . and Peterson. F. E . "A Structural Analysis Program for Static and Dynamic Response of Linear Systems"
SAPI V.Report No. EERC 73-1 I. University of CaHfornia. Berkeley. CA. 1973.
Baysal. M. Z .. " Behavior of an Exterior Precast Beam Column Connection Under Reversed Cyclic Loading:' M.S. Thesis. Department
of Civil Engineering. Middle East Technical University. Ankara. Turkey. 1991.
Bertero, V., ‖Lessons Learned From Recent Earthquakes and Research and Implications for Earthquake Resistant Design of Building
Structures in the United States,‗ Earthquake Spectra Journal, V. 2, No. 4, 1986, pp. 825-858.
Blades. P. S .. Jacks. D. H., and Beattie. G. 1.. " Investigation of the Influence of the End Support Condition on the Shear Strength of
Prestressed Voided Slabs (Oy-core)." Report 90-25115. Central Laboralories. Ministry of Works and Development. Lower Hutt . New
Zealand. 1990.
Blakeley, R. W. G., and Park, R., "Prestressed Concrete Sections with Cyclic Flexure," Journal of the Structural Division, ASCE, V. 99,
No. ST8, August 1973,pp.1717-1742.
Bonacci, John F., Collins, Michael P, Pantazopoulou,S. J., and Sheikh, SharminA. "The Participation of Architectural Precast Concrete
Cladding Panels in the Lateral-Load Resistance of Buildings-A DesignBrief." CPCI, 1995.
Booth, E.D., Kappos, A.J., Park, R., Moehle, J.P. and Hikone, S. Seismic design of concrete frame structures: A comparison of
Eurocode 8 with other international practice, Proceedings of the 6th Conference of the Society for Earthquake and Civil Engineering
Dynamics, Oxford, United Kingdom, March 1998, pp. 481-492.
Boresi, A. P., and Sidebottom, O. M., Advanced Mechanics of Materials, Fourth Edition, John Wiley & Sons, New York:,NY,1985.
Bresler, B., and Pister, K. S., "Strength of Concrete Under Combined Stresses," AC1 Journal, V. 55, No.3, September 1958, pp. 321-
345.
Brigginshaw. G., "A New Era for Structural Frames," Concrete (London), V. 21. No. 10, October 1987.
Buchanan, A. H., "Diagonal Beam Reinforcing for Ductile Frames," Bulletin of the New Zealand National Society for Earthquake
Engineering, V. 12, No.4, December 1979, pp. 346-356.
Bull, D. K., "Diaphragms," Seismic Design of Reinforced Concrete Structures, Technical Report No. 20, New Zealand Concrete
Society, 1997.
CEB, Bulletin D information No 220 and No 210. Volume1: General models, volume 2 Frame Members. Behaviour and analyses of
reinforced concrete structuresunder alternate actions including inelastic response
CEB, May 1904. Behavior and analysis of reinforced concrete structures under alternated actions including inelastic response, volume
2.
Celik, 0., and Sritharan, S. January 2004. An Evaluation of Seismic Design Guidelines Proposed for Precast Concrete Hybrid Frame
Systems, ISU-ERI-Ames Report ERI-0442S. Ames, IA: Iowa State University.
Celik, O. 2004. Analysis and Validation of a Seismic Design Method Proposeo .or Pre.:.2.c-~;-iy~:\:icjsterns. Master Thesis, Iowa State
University, Ames, Iowa.
Centre for Advanced Engineering: Guidelines for the use of precast concrete in buildings. University of Canterbury, Christchurch, New
Zealand, 1st edition 1991, 2nd edition 1999, 144 pp.
Choi. C. K., and Bang. M. S . "Plate Element With Cutout for Perforated Shear Wall." Journal of Structural Engineer.ing. American
Society of Civil Engineers. V. 113. No.2. February 1987.
Cluugh. D. P., " A Seismic Design Methodology for Medium- Rise Precast Concrete buildings, Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan, October 29-31, 1986, pp.101-126.
Code of Practice for General Structural Design and Design Loadings for Buildings, NZS 4203:1992, Standards Association of New
Zealand, Wellington, New Zealand, 1992.
Code of Practice for the Design of Concrete Structures, NZS 3101: 1982.Standards Association of New Zealand. Wellington, New
Zealand, 1982.
Comair, F., and Dardare, 1.. "Model Testing of Precast Semi-Rigid Beam· to-Column Connection." COST C I Proceedings of First
Workshop, Semi Rigid Behavior of Civil Engineering Structural Connections. E.N.S.A. I.S., Strasbourg. France. 1992, pp. 99- 119.
Concrete Construction NZS 3109:1997, Standards Association of New Zealand, Wellington, New Zealand, 1997
Concrete Structures Standard, Standards Association of New Zealand, Wellington, New Zealand. 1995.
Construction Work of Deck Slab on the Shin-Tsubunmo Bridge," MlI.lsuda Construction Off'lCe, Tokyo First Construction Bureau,
Japan Highw.o.y Corpomtiorl,<k1oher,
Corley. W. G. (primary contributor). "Concrete Parking Structures:' Northridge Earthquake Reconnaissance Report. V. 2. Earthquake
Engineering Research Institute. EorthqUllk L S~c.tro. Supplement C to V. II. January 1996. pp. 75-98.
DeChefdebien. A .. and Dardare. J .."Experimental Investigations on Current Connections Between Precast Concrete Components.'"
COST C I Proceedings of Second Workshop, Semi Rigid Behavior of Civil Engineering Structural Connections. CTU Prague, Czech
Republic. 1994. pp. 21-30.
Design of Concrete Structures, NZS 3101:1995, Standards Association of New Zealand, Welling ton . New Zealand, I995.
Dodd, L. L. and and J. I. Restrepo-Posada. March 1995. Model for Predicting Cyclic Behavior of Reinforcing Steel. Journal of
Structural Engineering, ASCE, V. 121, NO.3: pp. 443-445.
Draft for Comment: Design of Concrete Structures, DZ 3101. Revision of NZS 310 I : 1982:' Standards New Zealand, Wellington, New
Zealand. 1993.
Eberhard, M. O. and Sozen, M. A., 1993, ―Behavior-Based Method to Determine Design Shear in Earthquake-Resistant Walls‖,
American Society of Civil Engineers, Journal of Structural Engineering, 119 (2), 619-640.
Edmund Booth, Richard Fenwick. Concrete structures in earthquake regions
EERI, "Northridge Earthquake of January 17, 1994 Reconnaissance Report, Volume 2," William T. Holmes and Peter Sommers
(Technical Editors), Earthquake Spectra, Earthquake Engineering Research Institute, Supplement C to Volume II , January 1996.
Eighth Annual Report to the National Science Foundation," Center for Advanced Technology for Large Structural Systems. Le high
University, Bethlehem, PA, March 1994.
EJigehausen, R., Popov, E. P., and Bertero .V. V., "Local Bond Stress-Slip Relationships of Deformed Bars Under Generalized
Excitation." Report UCBI EERC·83123. Earthquake Engineering Research Center. University of California. Berkeley, CA. 1983. 178
pp.
Elliott, K. S . Davies, G . and Gorgun. H .. "Effective Length Factors in Precast Concrete Frames," Semi-Rigid Structural Connections.
Proceedings of JABSE Colloquium. V. 75, Istanbul. turkey. 1996.pp. 349-
Elliott, K. S and Tovey, A., et aI., "The Use of Precast Concrete in Buildings - A Design Guide," British Cement Association, Wexham
Springs. Slough, United Kingdom. May 1992.
Elliott, K. S Davies. Goo and Ad lparvar, R. M., ''Torsiona l Behavior of Precast Concrete Edge Beams and Connections," Magazine of
Concrete Research, V. 45, No. 164. 1993, pp.157- 168.
Elliott, K. S Soo Dav ie G., and Gorgun , H . "The Determination of Moment Rotation in Semi-Rigid Precast Concrete Connections
Using the Component Method," COST CI Proceedings of Second Workshop. Semi-Rigid Behavior of Civi l Engineering Structural
Connections, CTV Praguc. Czech Republic, 1994. pp. 31-40.
Elliott, K. S, Davies, G., and Gorgun, H "Semi-Rigid Connections in Precast Concrete Frames," 1997 Federation Internationale de la
Preeontrainte Symposium, Johannesburg. South Africa, 1997, pp. 463-476.
Elliott, K. S. Davies. G .. and Mahdi.A., ''The Effect of Moment Rotation on the Stability of Columns in Precast Concrete Structures."
Current research at the University of NOl!ing' ham, United Kingdom..
Englehardt, M . D. , and Husain, A. S., "Cyclic loading performance of Welded flange - Bolted Web Connections," Journal of Structural
Engineering ,American Society of Civil Engineers, 119, No. 12, December 1993, pp. 3537-3550.
Engstrom. B .. "Tests on the Dynamic Behavior of Precast Floors at Sudden Removal of an Exterior Support."Nordic Concrete
Research. Publication NO.7. 1988.
Engstrom. B., "Ductility of Tie Connections for Concrete Components in Precast Structures."' Technical Report. Federation
International de la Precontraime. London. 1982.
Erasmus, L. A., "Cold Straightening of Partially Embedded Reinforcing Bars A Different View," Concrete International. V. 3, NO.6.
1981, pp. 47-52.
Fajfar, P., and Fischinger, M., ―N2-A Method for Non-Linear Seismic Analysis of Regular Structures,‖ Ninth World Conference on
Earthquake Engineering, Tokyo, Japan, 1988.
Fargier-Gabaldon, L. B., and G. J. Parra-Montesinos.2006. Behavior of Reinforced Concrete Column-Steel Beam Roof Level T-
Connections under Displacement Reversals. Journal of Structural Engineering, V. 132,No. 7 (July): pp. 1041–1051.
Farrow, K., and Kurama, Y., "Ground Motion Scaling Methods for Different Structure Characteristics and Site Conditions," Enrthquake
Engineering and Structural Dynamics (submitted for publication, March 2002).
Farrow, K., and Kurama, Y., ―SDOF Displacement Ductility Demands Based on Smooth Ground Motion Response Spectra,‖
Engineering Structures, Elsevier, V. 26, No. 12, October 2004, pp. 1713-1733.
Fenwick, R. C. and Megget, L. M. 1993. Elongation and Load-Deflection Characteristics of Reinforced Concrete Members Containing
Plastic Hinges. Bulletin of the New Zealand National Society for Earthquake Engineering, 26(1), January: pp. 28-41.
Fenwick, R., and Davidson, B. S., ‖Elongation in Ductile Seismic-Resistant Reinforced Concrete Frames,‗ Proceedings, Tom Paulay
Symposium, Recent Developments in Lateral Force Transfer in Buildings, SP-157, American Concrete Institute, Detroit, MI, 1995, pp.
143-170.
Filiatrault, Elements of Earthquake Engineering and Structural Dynamics. Polytechnic International Press, Montreal, Canada, 1998.
Finlel, M., Schultz., D. M., and Iqbal, M. August 1976. Philosophy of Structural Response to Normal and Abnormal
fintel, Mark (Editor). 1974. Handbook of Concrete Engineering. New York: Van Nostrand Reinhold Company.
Fintel, Mark, "Behavior of Structures in the Caracas Earthquake," Civil Engineering, V. 38, No.2, February 1968, pp. 42-46.
Fintel, Mark, "Modern Concrete Structures Survive Romanian Earthquake," Civil Engineering, V. 48, No. 10, October 1978, pp. 80-81.
Fintel, Mark, "Quake Lesson From Managua: Revise Concrete Building Design?" Civil Engineering, V. 43,No.8, August 1973, pp. 60-
63.
Fintel, Mark, and Ghosh, S. K., "The Structural Fuse: An Inelastic Approach to Seismic Design of Buildings, "Civil Engineering, V. 51,
No.1,January 1981, pp. 45-51.
FIP Guide to Good Practice. "Horizontal Composite Structures." Federation International de la Preconlrainte, London, United Kingdom.
To be published.
Formulas for Structural Dynamics: Tables, Graphs and Solutions By Olga Lebed,&nbspIgor A. Karnovsky,&nbspIgor Karnovsky,
Frankel, A., Mueller, C., Barnhard, T., Perkins, D., Leyendecker,E., Dickman, N., Hanson, S., and Hopper, M., ―National Seismic
Hazard Maps, June 1996: Documentation,‖ U.S. Geological Survey, Open-File Report 96-532, 1996.
Freeman, S., ―Racking Tests of High-Rise Building Partitions,‖ Journal of Structural Engineering, V. 103, No. ST8, August 1977, pp.
1673-1685.
French. C . Leon, R., and Grundhoffer.T., "Bond Behavior of Uncoated and Epoxy Coated Reinforcement in Concrete," Structural
Engineering Report No. 92-04. University of Minnesota, Center of Transportation Studics. May 1992. 208 pp.
FujiI, Watanabe, Tak.,naka,. H., "Studies on Composite Girder Bridges Using Prestressed Precast concrete Slabs, Proceedings,
US/Japan Seminar on Precast Concrete Construction in Seismic zones Tokyo, Japan, October 29-3 l , pp.
George G. Penelis and Andreas J. Kappos. Earthquake resistant concrete structure
Ghali, A., and Neville, A. M., Structural Analysis: A Unified Classical and Matrix Approach, Third Edition, Chapman and Hal l, New
York, NY, 1989.
Ghali. A., and Neville. A. M., Structural Analysis; A Unified Classical and Matrix Approach. Intext Educational Publishers, 1972.
Ghosh, S., and Markevicius, V., ―Design of Earthquake Resistant Shear walls to Prevent Shear Failure,‖ Fourth U.S.
Goodno, Barry J. and Craig, James I., "Historical Overview of Studies on the Contribution of Cladding to Lateral Resistance of
Buildings," Proceedings: Architectural Precast Cladding-Its Contribution to Lateral Resistance of Buildings. PCI, 1989: pp 36-47.
Gorgun. H .. "Semi- Rigid Behavior of Connections in Precast Concrete Structures," Ph.D. Thesis, University of Nottingham. United
Kingdom. 1997.
Gregorian, C. E. Yang, T. S. and Popov, E. p. "Slotted Bolted Connection Energy Dissipators." Earthquake Engineering Resl"!arch
Center. Repon No. UC8/EERC-92J10. July 1992. 21 pp.
Gulkan, P. and Sozen. M. A. "[nelas-tic Responses of Reinforced Concrete Structure.~ to Earthquake Motions," Reillforced Concrete
Structures ill Seismic ZOliel', Publication SP-53, American Concrete Institute. Detroit. MI.1977.pp.I09-115.
Hajime Umemura, Haruo Takizawa. Dynamic response of reinforced concrete buildings.
Hajime, O., and M. Kohichi. 1991. Nonlinear Analysis and Constitutive Models of Reinforced Concrete .Tokyo, Japan: Gihodo Shuppan
Co. Ltd.
Hall, J. F. (Editor), 1995, ―Northridge Earthquake Reconnaissance Report,‖ Earthquake Spectra, V. 11, Supplement C, No. 1, Sept.-
Oct., p. 523.
Hanson, N. W., "Seismic Tests of Horizontal Joints," Supplemental Report 'C', Design and Construction of Large Panel Concrete
Structures, Office of Policy Development and Research, Department of Housing and Urban Development, Washington, D.C., January
1979.
Harries, D. Mitchell, W. D. Cook, and R. G. Redwood, ―Seismic Response of Steel Beams Coupling Concrete Walls, Journal of
Structural Engineering, ASCE, Vol. 119, No. 12, December 1993.
Harries, G. Gong, and B. M. Shahrooz, ―Behavior and Design of Reinforced Concrete, Steel, and Steel-Concrete Coupling Beams,‖
Earthquake Spectra, Vol. 16, No. 4, November 2000.
Harris, H. G., and Abboud, B. E., "Cyclic Shear Behavior of Horizontal Joints in Precast Concrete Large Panel Buildings," Proceedings
of a Workshop on Design of Prefabricated Concrete Buildings for Earthquake Loads, Applied Technology Council, April 27-29, 1981,
pp. 403-438.
Hawkins, N. M., and Ghosh, S. K., Acceptance Criteria for Special Structural WaJJs Based on ValJdation Testing, Pro-posed
Provisional Standard and Commentary, S.K. Ghosh As-sociates Inc., Northbrook, IL, 2003
Hawkins. N. M . and Hjoneset. K .• "Minimum Reinforcement Requirements or Concrete Aexural Members: ' Chapter 15. Applications
of Fracture Mechanics to Reinforced Concrete.A. Carpenteri (Editor). Elsevier. 1991 . pp. 3794 12.
Hawkins. N. M .. "Research Considerations for Precast Concrete Construction in U.S.A.:' Seminar 011 Precast Concrete Construction
in Seismic Zones, Japan concrete institute Tokyo. Japan, October 27031. 1986, V. 1-1, pp. 295-31O.
Hofheins, C., ―Welded Loose-Plate Connections for Hollow- Core Precast Wall Panels,‖ M.Sc. Thesis, Department of Civil &
Environmental Engineering, University of Utah, Salt Lake City, UT, May 1999.
Holmes, W. T., and P. Sommers, eds. 1996. Northridge Earthquake of January 17, 1994 Reconnaissance Report. V. 2. Supplement C
to Earthquake Spectra, V. 11. Oakland, CA: Earthquake Engineering Research Institute (EERI).
Holmes. William T and Sommers, Peter (Editors), "Northridge Earthquake of January 17, 1994, Reconnaissance Report. Volume 2."
Earthquake Engineering Research Institute, Eonhqlmu Spectra. Supplemenl C (0 V. J J, January 1996.
Hota, S. R.. and Naaman, A. E., "Bond-Stress Slip Response of Reinforcing Bars Embedded in Fiber Reinforced Cement Composites
Under Monotonic and Cyclic Loading." Report No. UMCEE 95-15. University of Michigan. Ann Arbor, MI. June 1995.
Hutchinson, R. L., "Post-Tensioned Horizontal Connections Typically Used for Precast Concrete Load bearing Shear Wall Panels," M.
Sc. Thesis, University of Manitoba, Winnipeg, January 1990.
Igarashi, A.. Scible, F., Hegemier. G .. and Priestley, M. J. N., "The U.S.-TCCMAR Full-Scale Five-Story Masonry Research Building
Test. Part III -Seismic Load Simulation," Report SSRP-94103. University of California. San Diego. CA.
ISE. "Structural Joints in Precast Concrete." Institution of Structural Engineers, London. United Kingdom, August 1978.56 pp.
Ishizuka, T., "Effect of Bond Deterioration on Seismic Response of Reinforced and Partially Prestressed Concrete Ductile Moment-
Resisting Frames," Ph.D. Thesis ,University of Washington, Seattle, WA,1987.
izumi, M., and Abe,G. " Shear Strength of Precast prestressed joints" Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan October 29-31,1986, 97-110.
James R. Harris and Finley A. Charney. "The Effect of Architectural Precast Concrete Cladding on the Lateral Response of Multistory
Buildings," Proceedings: Architectural Precast Cladding-Its Contribution to Lateral Resistance of Buildings. PCI, 1989: pp 80-96.
Kabeyasawa, T., "Ultimate-State Design of Wall· Frame Structures," in Earthquake Resistance of Reinforced Concrete Structures, A
Volume Honoring Hiroyuki Aoyarna. Editor. T.Okada. Department of Architecture, Faculty of Engineering, University of Tokyo, Japan,
November 1993, pp. 431-440.
Kallros, M. K., and Spencer R. A . "An Experimental Investigation of the Behavior of Connections in Thin Precast Concrete Panels
Under Earthquake Loading." MS Thesis, University of British Columbia, Vancouver, British Columbia, Canada, April 1987.
Kang, S., S. Keowen, R. Nigbor, and A. Salamanca. 2008. PCI-DSDM Initial Ambient and Forced Vibration Test Data. Internal report.
Chicago, IL: PCI.
Kanoh, Y., "review of Japanese precast Concrete Frame Systems Used as Building Structures," , Proceedings, US/Japan Seminar on
Precast Concrete Construction in Seismic zones Tokyo, Japan October 31. Pp
Kao, G., 1998, ―Design and Shake-Table Tests of a Four-Storey Miniature Structure Built with Replaceable Plastic Hinges‖, M.E.
Thesis, Dept. of Civil Engineering, University of Canterbury, Christchurch, NZ.
Karadogan, H. F., T. Huang, L. W. Lu, and M. Nakashima. 1980. Behavior of Flat Plate Floor System under In-Plane Seismic Loading.
In Proceedings of the Seventh World Conference in Earthquake Engineering, V. 5, pp. 9–16. Ankara, Turkey: Turkish National
Committee on Earthquake Engineering.
Kelly, J. M., Skinner, I., and Heine, A. J. 1972. Mechanisms of Energy Absorption in Special Devices for Use in Earthquake Resistant
Structures. Bulletin of the New Zealand National Society for Earthquake Engineering, 5(3): pp. 63-68.
Keronen. A., '"Effect of Semi· Rigid Connect ions in Reinforced Precast Concrete Portal Frame – Load Tests," Report 69. Technical
University of Tampere, Finland, 1996.
Kowalsky. M. J.. Priestley. M. J. N., 3I1d MacRae. G. A., "Displacement- Based Design of RC Bridge Columns in Seismic Regions,"
Ear1hquau Engineering and Structural Dynamics ,V. 24, 1995, pp. 1623-1643.
Kramar, M., T. Isakovic, and M. Fischinger. 2008.Seismic Collapse Safety of RC Columns in Precast Industrial Buildings. No. 05-01-
0396. In 14th World Conference on Earthquake Engineering. Beijing, China: China Earthquake Administration. CD-ROM.
Kunze, Walter E., Fintel, Mark, and Amrhein, James E., "Skopje Earthquake Damage," Civil Engineering, V. 33,No. 12, December
1963, pp. 56-59.
Kurama, Y., and Farrow, K., ―Ground Motion Scaling Methods for Different Site Conditions and Structure Characteristics, ‖Earthquake
Engineering and Structural Dynamics, V. 32, No.15, December 2003, pp. 2425-2450.
LATERAlA Version 1.10, Static Lateral Analysis Program for Wind and Seismic Loading of Shear Wall Assemblies, Jacques &
Aswad,lnc., Denver, CO, 1998.
lB. Elliott, K. S., Davies. G .. and Gorgun, H., "Component Method Validation Tests in Precast Concrete Semi-Rigid Connections.'"
Semi-Rigid Structural Connections, Proceedings of IABSE Colloquium. V. 75. Istanbul. Turkey.1996, pp. 299-308.
Leon, ―Interior Joints with Variable Anchorage Lengths,‖ Journal of Structural Engineering, ASCE, Vol. 115, No. 9, September 1989.
Lew. "Performance b-Scale Preca51 Concrete Beam-Subjected to Inelastic Loads:' NIST 4433. Institute and MD. October M. J. -
Reillforctd Ctmcrele alltl M asQ/U)' Building.f. New York.. NY. 1992.
Lindberg, R.. ct aI., "Beam-to-Column Connections in a Story Height Concrete Frame." Report 57. Technical University of Tampere,
Finland, 1992.
Llorente, C. A., "Inelastic Behavior of Precast Shear Walls," Massachusetts Institute of Technology, Department of Civil Engineering,
Research Report No. R81-25, Order No. 710, August 1981.
lmai, H., Kanoh, Y" " Standard for Performance Evaluation of rebar joints ", Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, 29-31. 1986,
Low. S·G .. " Behavior of a Six Story Office Building Under Moderate Seismicity." Ph.D. Dissertation, University of Nebraska- Lincol n.
Lincoln. Ncbraska. May 1995. 135 pp.
Mahdi. A. A .. "Moment Rotation Effects on the Stability of Columns in Precast Concrete Structures," Ph.D. Thesis. University of
NOllingbam, United Kingdom. 1992.
Mahin, S., and Bertero, V., ‖Problems in Establishing and Predicting Ductility in Structural Design,Proceedings, International
Symposium on Earthquake Structural Engineering, St. Louis, MO, 1976
MainSlone, R. 1.. "On the Stiffnesses and Strengths or In fill Frames," Building Research Establishment Paper CP2{72, Garsto n,
Watford ,United Kingdom, February 1972.
Martin. L. D., and Korkosz, W. J., "Connections for Precast Prestressed Concrete Buildings." Precast/Prestressed Concrete Institute,
Chicago, IL. March 1982.
Mast. R. F., "Auxiliary Reinforcement in Concrete Connections." Proceedings of the American Society of Civil Engineers, Journal of
rhe Structural Division, V. 94. ST6. June1968, pp. 1485·1504.
Mattock. A. H .. "Shear Transfer in Concrete Having Reinforcement :ll an Angle to the Shear Plane."' Shear ill Reinforced concrete. SP-
42. American Concrete Institute. Detroit. MI. pp. 17-42.
Megget, L., and Fenwick, R. C., ‖Seismic Behavior of a Reinforced Concrete Portal Frame Sustaining Gravity Loads,‗ Bulletin of the
New Zealand National Society for Earthquake Engineering, V. 22, No. 1, 1989, New Zealand, pp. 39-49.
Meinheit, D. F. and Jirsa, J. D. February 1977. The Shear Strength of Reinforced Concrete Beam Column Joints, CESRL Report No.
77-1. Austin, TX: University of Texas at Austin, 271 p.
Meinhelt and J. O. Jirsa, ―Shear Strength of R/C Beam-Column Connections,‖ ASCI Journal of the Structural Division, Proceedings of
the American Society of Civil Engineers, Vol. 107, No. ST11, November 1981.
Mejia-McMaster. J. C. and Park. R "Precast Concrete Hollow-Core Floor Unit Support and Continuity."' Research Report No. 94/4.
Department of Civil Engineering. University of Canterbury. Christchurch. New Zealand. 1994.
Menegotto, M., ―Precast Floors Under Seismic Action,‖ Proceedings, The Second International Symposium on
Prefabrication—Helsinki, Finland, May 2000.
Miranda, E., ―Inelastic Displacement Ratios for Structures on Firm Sites,‖ Journal of Structural Engineering, V. 126, No.10, October
2000, pp. 1150-1159.
Miranda, E., and Aslani, H., ―Probabilistic Response Assessment for Building-Specific Loss Estimation,‖ Pacific Earthquake
Engineering Research Center (PEER) Report, 2003.
Miranda, E., and Ruiz-Garcia, E., ―Evaluation of Approximate Methods to Estimate Maximum Inelastic Displacement Demands,‖
Earthquake Engineering and Structural Dynamics, V.31, No. 3, March 2002, pp. 539-560.
Mosier, W. G. 2000. Seismic Assessment of Reinforced Concrete Beam-Column Joints. MSCE Thesis, Dept. of Civil Engineering,
University of Washington, 218p.
N. M. Newmark, ―Current Trends in the Seismic Analysis and Design of High-Rise Structures,‖ in Earthquake Engineering, Chapter
16, R. L.Wiegel (Ed.), Prentice Hall, Englewood Cliffs, New Jersey, 1971, pp. 403–424.
Nassar, A., and Krawinkler, H., ―Seismic Demands for SDOF and MDOF Systems,‖ John A. Blume Earthquake Engineering Center,
Report No. 95, Department of Civil Engineering, Stanford University, Palo Alto, CA, June 1991.
National Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Berkeley, CA, V. 2, 1990, pp.905-913.
NBS Committee, " Ductile Frames of Precast Concrete." National Bureau of Standards Research program. Washington D.C.
New Zealand Standards Association. 1992. Code of Practice for General Structural Design and Design Loadings for Buildings, N2S
4203 :1992 . New Zealand, Wellington.
Newmark. N. M . and Hall. W. J ." Procedure and Criteria for Earthquake Resistant Design." Building Practice for Disaster Mitigation.
Building Science Series 45. National Bureau of Standards. Washington. D.C . 1973.
Nishiyama, M. 2002. Failure Mechanism of Post-Tensioned Beam-Column Subassemblages. Proceedings of the First fib Congress:
Concrete Structures in the 21st Century, Session 6, pp.75–76.
NIST, " 1994 Northridge Earthquake: Performance of Structures, Lifelines, and Fire Protection System," NIST Special Publication,
National Institute of Standards and Technology, Gaithersburg, MD, 1994.
Northridge Earthquake, January 17, 1994, Preliminary Reconnaissance Report," Earthquake Engineering Research Institute, Oakland,
CA, March 1994.4. Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages During the 1994
Northridge Earthquake, "Proceedings, XIII ASCE Structures Congress, Boston, MA, April 1995.
Northridge Earthquake: Performance of Structures, Lifelines, and Fire Protection Systems," NIST Special Publication 862,National
Institute of Standards and Technology, Gaithersburg, MD, May 1994.
Oliva, M. G . and Shahrooz. B. M . "Shaking Table Tests Panel Structures Using Limited Slip Bolted Joints," Proceedings of the Eighth
World Conference on Earthquake Engineering. V. 6. 1984, pp. 7 17-724.
Otani, S., ―Hysteresis Models for Reinforced Concrete for
Pall, A. S . and Marsh, C., "Seismic Response of Large Panel Structures Using Limited-Slip Bolted Joints." Third Canadian
Conference on Earthquake Engineering, McGill University ,V. 2, Montreal , Quebec. Canada, 1979, pp. 899·9 16.
Pantazopoulou, S. and Bonacci, J. 1992. Consideration of Ouestions about Beam-Column Joints. ACI Str . Jo., 89(1), January-
February: pp. 27-36.
Pantelides, C. P., Reaveley, L. D., Gergely, I., Hofheins, C., and Volnyy, V., ―Testing of Precast Wall Connections,‖ University of Utah,
Department of Civil and Environmental Engineering, Report UUCVEEN 97-02, 97-03, 98-01, Salt Lake City, UT, 1997-98.
Parra-Montesinos, G. J., and J. W. Wight. 2000. Seismic Response of Exterior RC Column-to-Beam Steel Beam Connections. Journal
of Structural Engineering, V. 126, No. 10 (October): pp. 1113–1121.
Paulay, T . Park. R .• and Phillips. M. H . "Horizontal Construction Joints in Cast in Place Concrete," Shear in Reinforced Concrete,
ACI Special Publication SP-42. V. 2, Fannington Hills, Ml. 1974, pp. 599-616.
PCFA. "'Frames for Multistory Buildings - An Economic Comparison."Precast Concrete Frames Association. Leicester, United
Kingdom. 1985.
Pcxhanan. S . and Hannon. T . "Bond Slip Model for Generalized Excitation Including Fatigue," ACI Materials Journal. V. 86, No.5,
September October 1989, pp. 46.5474.
Pearce, D. 1.. and Mallhews. D. D.,"An App ..... isal of the Design of Shear Wall s in 8 0)( Frame Structures," Property Services
Agency, London, United Kingdom. April 1973.
Phillips. R. 1. " Performance of Parking Structures in the Northridge Earthquake." Procu din85. 63rd Annual Convention, Structural
Engineer Association of California, Lake Tahoe. CA, September 1994. pp. 177- 182.
Phillips. R. J . ''Santa Monica College, Precast Concrete Parking Structure." 1994 Northridge Eat1hquakL - Building Case Studies
Propjet, Proposition 122. Product 3.2, Seismic Safety Commission. State of California. Sacramento. CA. pp. 137· 142.
Pincheira, J. A., Oliva, M. G., and Kusumo-Rahardjo, F. I., ―Tests on Double-Tee Flange Connectors Subjected to Monotonic and
Cyclic Loading,‖ Research Report, University of Wisconsin, Madison, WI, 1998.
Pinelli, Jean-Paul, Moor, Christian, Craig, James I, and Goodno, Barry J. Experimental Testing of Ductile Cladding Connections for
Building Facades
Pochanart, S., and Harmon, T., "Bond-Slip Model for Generalized Excitation Including Fatigue," AC1Materials Journal, V. 86,
No.5,1989, pp. 465-474.
Poole, R. A" and Clendon, J, E .. "Mid City Towers - An Efficient Precast Concrete Framed Building," Proceedings, PACIfic Concrete
Conference, V. I, Auckland, New Zealand, November 1988, pp. 319-332.
POpo\'lcS. S., "A Numerical Approach to the Complete Stress-Strain Curves for Concrete," Cement and Concrete Research. V. 3, No.
5, Sept ember 1973, pp. 583·599.
Popov, Egor P. and Youssef, Nabih. Seismic Cladding of Walls and Domes. Elsevier Science Ltd., T199-4, 1998.
Porter," M. L., and Sabri, A. A, "Plank Diaphragm Characteristics," U.S.-Japan Coordinated Program for Masonry Building Research
Report 5.1-1, College of Engineering, Iowa State University, Ames, lA, July 1990.
Posada, M., and S. Wood. 2002. Seismic Performance of Precast Industrial Buildings in Turkey. In 7th U.S.National Conference on
Earthquake Engineering (7NCEE). Oakland, CA: Earthquake Engineering Research Institute.
Prakash, V., and Powell, G., ―DRAIN-2DX Base Program Description and User Guide; Version 1.10,‖ Report No.UCB/SEMM-93/17,
Structural Engineering Mechanics and Materials, Department of Civil Engineering, University of California, Berkeley, CA, November
1993.
Precast Concrete Strategic Group," Precast Concrete Study Summary Report." Amp Economic Consultants, London, United Kingdom.
November 1989.
Priestley, M. J. N F. Seible, and M. Calvi, Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, 1995.
Prof, Dip. -Ing.J.N.J.A.Vambersky / Prof.dr.ir.J.C.Walraven / Ing.J.P.Straman.Designing and understanding precast concrete
structures in building.
Quinn, A. V . "Parking Garages in the Northridge Earthquake. Thesis submitted in partial fulfillment of the requirements for the MSCE
degree. Department of Civil Engineering. University of Washington. Seallie. WA, 1995.
R. Li and M. Pourzanjani, ―Sensitivity of Building Response to Nonlinear Analysis Models,‖ The Structural Design of Tall Buildings.
John Wiley & Sons, 1999.
Raynor, D. 1., "Bond Assessment of Hybrid Frame Continuity Reinforcement," MSCE Thesis, Department of Civil and Envi-ronmenta[
Engineering, University of Washington, Seall[e, WA,2000.
Ren, R., and Naito, C.J., 2007, "Acceptance Criteria for Precast Concrete Diaphragm Connectors Based on Structural Testing ",
ATLSS Report # 07-XX, Lehigh University, Sept.
Restrepo, J. Park, R., and Buchanan, A., ―Seismic Load Tests on Connections Between Precast Concrete Elements,‖ New Zealand
Concrete Society, Proceedings, Silver Jubilee Conference, Wairakei, Taupo, New Zealand, 1989.
Restrepo, J. Dodd, L. L., Park, R .. and Cooke, N., "Variables Affecting the Cyclic Behavior of Reinforcing Steels," ASCE Journal of
Structural Engineering, V. 120, No. I I, 1994.
Rhodes, A. B., Sause, R., Pessiki, S., and Fleischman, R. B., "Seismic Performance of Precast Parking Structures: Transverse
Direction," Earthquake Engineering Research Report No. EQ-97-03, Department of Civil and Environmental Engineering, Lehigh
University, Bethlehem, PA, 1997.
Rodriguez, M. E., Restrepo, J. I., and Carr, A. J., "Earthquake Induced Floor Horizontal Accelerations in Buildings," Earthquake
Engineering and Structural Dynamics, V. 31, No.3, March 2002, pp. 693-718..
Ruiz-Garcia, J., and Miranda, E., ―Inelastic Displacement Ratios for Evaluation of Existing Structures,‖ Earthquake Engineering and
Structural Dynamics, V. 32, No. 8, July 2003, pp.1237-1258.
Saiidi, M., and Sozen, M., ―Simple Nonlinear Seismic Analysis of R/C Structures,‖ Journal of Structural Engineering, ASCE, V. 107,
No. ST5, 1981, pp. 937-951.
Saint Venant, B. 1855. Memoire des Savants Etrangers. Journal de Mathematique, Liouville, taille 14.
SEAOC Performance Based Seismic Design Ad Hoc Committee. "Tentative Performance Based Seismic Engineering Guidelines -
SEAOC Blue Book, Appendi" G," 1998.
Seismic construct program
Seo, C., ―Behavior and Design of Shear Leg for Shear Connectors Between Double Tee Members,‖ MS Report, University of
Wisconsin, Madison, WI, May 1997, 93 pp.
Sheppard, D. A .. and Phillips, W. R ..Precast Precast and Prestressed Concrete. Third Edition. McGraw. Hill, New York, NY, 1989.
Shibata, A., and Sozen, M., ―Substitute Structure Method for Seismic Design in Reinforced Concrete,‖ Journal of Structural
Engineering, American Society of Civil Engineers, V. 102,No. 12, pp. 3548-3566.
Shiohara. H .• Hosokawa, Y . Nakamura,T., and Aoyama. H., "Direct Shear Transfer Mechanism at the Interface of Reinforced
Concrete Joints." Trtmsactiolls. Japan Concrete Institute, V. 6, 1984, pp. 409-416.
Shioya. T., Igura. M . Nojiri. Y . Akiyama. H . and Okada. T . "Shear Strength of Large Reinforced Concrete Beams." Fracture
Mechanics: Applications to Concrete, Special Publication 118. American Concrete Institute, Fannington Hills. MI. 1989.
Shome, N., and Cornell, C., ―Normalization and Scaling Accelerograms for Nonlinear Structural Analysis,‖ Sixth U.S. National
Conference on Earthquake Engineering, Seattle, WA ,May-June 1998 (CD-ROM).
Shome, N., Cornell, C., Bazzurro, P., and Carballo, J. ,―Earthquakes, Records, and Nonlinear Responses,‖ Earthquake Spectra,
Earthquake Engineering Research Institute, V. 14,1998, pp. 469-500.
Silvester, D. B., and Dickson, A. R., ―Fanshawe Street Building – A Precast Concrete Study,‖ Proceedings of Pacific Concrete
Conference, V. 1, Auckland, New Zealand, November 1988, pp. 333-344.
Somerville, P., ―Report on UC Science Building ground motions‖,
http://www.peertestbeds.net/UCS/Somerville%20Dec%202001%20UCS%20ground%20motions.pdf
Somerville, P., Smith, N., Punyamurthula, S., and Sun, J. ―Development of Ground Motion Time Histories for Phase 2 of the
FEMA/SAC Steel Project,‖ SAC/BD-97/04, SAC, Sacramento, CA, 1997.
Sonohe , "State the of art of Low rise Precast Reinforced Concrete structures in Japan, Proceedings, US/Japan Seminar on Precast
Concrete Construction in Seismic zones Tokyo, Japan October 20-3I, 1986,pp.2 1-34.
Sorensen, K., "Precast Frame Construction in Zones 3 4" Proceedings of the Conference. ATC-8,.Los
Soudki. K. A . "Behavior of Horizontal Connections for Precast Concrete Load bearing Shear Wall Panels Subjected 10 Large
Reversed Cyclic Deformations," Ph.D. Thesis, University of Manitoba. Winnipeg, Manitoba ,Canada, May 1994,670 pp.
Sozen, M. A., ―Review of Earthquake Response of R/C Buildings with a View to Drift Control,‖ State-of-the-Art in Earthquake
Engineering, O. Ergunay and M. Erdik (Editors), Ankara, Turkey, 1981, pp. 383-418.
Specijicatioll for Concrete Consum:tiOlI,fa.':; 3109: 1987. Standards Association of New Zealand, Wellington. New Zealand. 1987,
Spencer, R., "Earthquake Resistant Connec1ions for low Rise ~cast Concrete Buildings," Seminar on Precast Concrete
COn5U'UCtion in Seismic Zones, V. 1, NSFIJapan Society for the Promotion of Science. October 1986.
Stafford-Smith, B .. and Carter. c., "A Method of Analysis for" Infill Frames," Paper 1218, Proceedings. Institution of Civ il Engineers.
London. United Kingdom, September 1969.
Standards New Zealand, 1997 ―Concrete Structures Standard—The Design of Concrete Structures‖ and ―Commentary on the Design
of Concrete Structures,‖ NZS 3101: Parts 1 and 2:1995 and ―Amendment No. 1 to NZS 3101, 1997,‖ Wellington, New Zealand.
Stanton, J. F. "Hybrid Moment-Resisting Precast Beam Column Connections," World Wide Advances in Structural Concreteand
Masonry (A. E. Schultz and S. L. McCabe. Editors),ASCE Stroetures Congress, Chicago, IL, 1996, pp. 266-277.
Stevenson. R. B and Beattie. G. J. "Cyclic Load Testing of a Beam Cruciform Incorporating Precast Beam Elements." Central
Laboratories Re· port 88-85204/1. Works and Development Services Corporation (NZ) Ltd .• Lower Hutt, New Zealand. 1988..
Stone, W. C., Cheok, G. S. and Stanton, J. F. 1995. Beam-Column Connection Subjected to Seismic Loads. ACI Str.Jo., 92(2), March-
April: pp. 229-249.
Structural Engineers Association of California (SEAOC) Ad Hoc Committee on Precast Concrete, Committee Correspondence, 1994.
Tel1l{/th'e ProliisiolJsJor the Del"e/oplIJe/ 1f oj Seismic Regulations for Buildings. Applied Technology Council. ATC Publication ATC-
3-06. National Bureau of Standards Special Publication 5[0. National Science Foundation Publication 78-8. [978.
Tena-Colunga, A. and Abrams, D. P., 1992, Response of an Unreinforced Masonry Building During the Loma Prieta Earthquake‖,
Structural Research Series No. 576, Department of Civil Engineering, University of Illinois at Urbana-Champaign.
Tests on Reinforcing Bar in Reinforced Concrete Columns Using NMB Splice Sleeves." Test Report. Splice Sleeves Japan Ltd Tokyo,
Japan. 1990.
The AU Design Recommendations for Seismic Design of Reinforced Concrete." Translated by Teshigawara. Otani and Anderson.
Structural Systems Research Repon No. SSRP-91/04. University of California. San Diego. CA. July 1991.
Todd, D. R., N. J. Carino, R. M. Chung, H. S. Lew, A. W. Taylor, W. D. Walton, J. D. Cooper, and R. Nimis. 1994. 1994 Northridge
Earthquake: Performance of Structures, Lifelines, and Fire Protection System. Gaithersburg, MD: National Institute for Science and
Technology.
Uang, C. M., and Maarouf, A., "Seismic Displacement Amplification Factor in Uniform Building Code," Research Bulletin Board,
SEAONC. No. BB93-3, San Francisco, CA, 1994, p. BI .
Vallenas, V. V. Bertero, and E. P. Popov, Hysteretic Behavior of Reinforced Concrete Structural Walls, Report UCB/EERC-79/20,
Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, August 1979, 234p.
Veletsos, A. S. and Newmark, N.M. 1960. Effect of Inelastic Behavior on the Response of Simple Systems to Earthquake Motions.
Proc. 2WCEE, Tokyo and Kyoto, pp. 895-912.
Venuti, W. J., and D. Nazarian. 1968. Diaphragm Shear Connectors between Flanges of Prestressed Concrete TBeam. Report no. ST-
0007-68. San Jose State College, San Jose, CA.
Vernu, S. 2003. Connection and Structural Level Analysis of Precast Hybrid Frame Systems. Master Thesis, Iowa State University,
Ames, Iowa.
Virdi, K. S. , Dnd Ragupathy, P., "Stability Problems Associated with the Behavior of Joints in Precast Concrete Frames," Proceedings
of First International Conference on Lessons From Structural Failures. Prague. Czechoslovakia. September 199[. pp. 123-138.
Viwathanatepa, S., Popov, E. P., and Benero, V. V "Seismic Behavior of Reinforced Concrete Interior Beam· Column Sub
assemblages." Report No. UCBIEERC·79/14, Earthquake Engineering Research Center. University of California. Berkeley. CA, 1979.
Walker, Brice, Earthquake. Alexandria,VA: Time-Life Books, 1982, p. 159
Wallace, ―New Methodology for Seismic Design of RC Shear Walls,‖ Journal of Structural Engineering, ASCE, Vol. 120, No. 3, March
1994.
Wallace, ―Reinforced Concrete Walls: Recent Research & ACI 318-2001,‖ Proceedings of the 6th U.S. National Conference on
Earthquake Engineering.
Wallace, ―Seismic Design of RC StructuralWalls. Part I: New Code Format,‖ Journal of Structural Engineering, ASCE, Vol. 121, No. 1,
January 1995.
Wallace, John W., and Moehle, Jack P. 1992. Ductility and Detailing Requirements of Bearing Wall Buildings. Journal of Structural
Engineering, V. 118, No.6 (June).
Walraven. J. Co, and Mercx. W. P. Mo, "The Bearing Capacity for Prestressed Hollow Core Slabs." Heron.28. No.3, Delft University of
Technology. Delft, Netherlands, 1983.
Wan, G. and Fleischman, R. B., 2007b. ―Effect of Spandrel Beam to Double Tee Connection Characteristic on Precast Diaphragm
Response‖, in preparation.
Wan, G. and Fleischman, R.B., 2007a, ―A Rational Method for Calculating the Service Stiffness and Yield Strength of Precast Floor
Diaphragms‖, in preparation.
Weidlinger, Paul, and Ettourney, Mohammed. Sequential Coupling: New Structural Connections for Seismic Control .Journal of
Structural Engineering, ASCE, V. 119, No.1, January: 1993
West. J. 5 .• "Behaviour of Horiwntal Connections for Precast Concrete Load-Bearing Shear Wan Panels Subjected to Large
Reversed Cyclic Shear Loading," MS Thesis, University of Manitoba. Willnipeg, Manitoba. Canada, August 1993,3 19 pp.
Wolfram. 5 .. Mllthematica: A System for Doing Mathematics by Computer. Addison-Wesley Publishing Co Redwood City, CA. 1988.
Wood, R. U .. " Plasticity. Composite Action and Collapse Design of Unreinforced Shear Wall Panels in Frames." Papcr 81 10.
Proceedings, Institution of Civil Engineers, v. 65, June 1978.
Wood, S. L. 1991. Performance of Reinforced Concrete Buildings During the 1985 Chile Earthquake: Implications for the Design of
Structural Walls. Earthquake Spectra, V. 7, No.4: pp. 607-638.
Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages During the 1994 Northridge Earthquake,"
Proceedings, XIII ASCE Structures Congress, Restructuring: America and Beyond, V. 1, New York, NY, 1995, pp. 563-566.
Wood, S. L., Stanton, J. F., and Hawkins, N. M., "Performance of Precast Parking Garages in the Northridge Earthquake: Lessons
Learned," Proceedings, XIV ASCE Structures Congress, Chicago, IL, V. 2, April 1996, pp. 1221-1227.
Wood. S. L . Smnton. J. F . and Hawkins. N. M., M Evaluation of Parking Garage Response During the 1994 Northridge Earthquake,"
Proceedings. Eleventh World Conference on Earthquake Engineering. Acapulco. Mexico. June 1996.
Wood. S. L . Stanton. 1. F . and Hawkins, N. M . "Influence: of Aoor Diaphragms on the Seismic Response of Precast Parking
Garages. ~ Proceedings. NEHRP Conference and Workshop on Research on the Northridge. California Earthquake of January 17,
1994, California Universities for Research in Earthquake Engineering, Volume III-A, 1998, pp. 189- 196.
Woodward-Clyde Federal Services, ―Suites of Earthquake Ground Motions for Analysis of Steel Moment Frame Structures – Draft
Report,‖ http://nisee.berkeley.edu/data/strong_motion/sacsteel/draftreport.html
Y. J. Park, A. M. Reinhorn, and S. K. Kunnath, ―DARC: Inelastic Damage Analysis of Reinforced Concrete Frames—Shearwall
Structures,‖ Technical Report NCEER-87- 0008, State University of New York at Buffalo, Buffalo, New York, 1987.
Y. Xiao and H. W. Yun, ―Full Scale Experimental Studies on High-Strength Concrete Columns,‖ Report No. USC SERP 98/05,
University of Southern California, Los Angeles, July 1998.
Yagci, 5., "Behavior of an Improved Exterior Precast Beam-Column Connection Under Reversed Cyclic loading." M.S. Thesis,
Department of Civil Engineering. Middle East Technical University . Ankara. Turkey. 1993.
Yee, A. A., "Seismic Considerations for Precast Concrete Construction , Proceedings, US/Japan Seminar on Precast Concrete
Construction in Seismic zones Tokyo, Japan, October 29-31. 1986
Yılmaz, S., A. Kuyucular, S. M. Senel, and M. Inel.2006. Evaluation of Turkish Seismic Code for Pinned Precast Concrete Structures.
In Proceedings of the 7th International Congress on Advances in Civil Engineering. Istanbul, Turkey: Istanbul Technical University.CD-
ROM.
Zerbe, H. E. and Durrani, A. J . 1989. Seismic Response of Connections in 2-Bay RIC Frame Subassemblies. ASCE, 10. Str. Eng.,
115(11): pp. 2829-2844.
Alcocer, S., Carranza, R., Perez, D., and Martínez, R., “Seismic Tests of Beam-Column Connections in a Precast Concrete Frame,” PCI
JOURNAL, V. 47, No. 3, May-June 2002, pp. 70-89.
Allen, M., and Kurama, Y., "Lateral Load Behavior and Design of Unbonded Post-Tensioned Precast Walls with Large Openings," in
preparation for submittal to the PCI JOURNAL,1999.
Allen, M., and Kurama, Y., “Design of Rectangular Openings in Precast Walls Under Vertical Loads,” PCI JOURNAL, V.47, No. 1,
January-February, 2002, pp. 50-67.
Blandon, J., and Rodriguez, M., ”Behavior and Design Recommendations of Connections and Floor Diaphragms in Seismic Resisting
Precast Concrete Buildings,‘ to be published in March-April 2005 PCI JOURNAL
Cheak. Lew, S ." Model precast Concrete beam to Column connections subjected to cyclic Loading," PCI JOURNAL v38. July-august
1993
Cheal, Geraldine S .. and Lew, H. S ."Seismic Performance of III Scale Post Tensioned Precast Beam-Column Connections, "to be
submitted 10 the PCI JOURNAL for publication consideration.
Cheok, G. S., and Lew, H. S., "Performance of Precast Concrete Beam-to Column Connections Subject to Cyclic Loading," PCI
JOURNAL, V. 36, No.3, May-June 1991, pp. 56-67.
Cheok. G .S and Lew, H. 5., "Model Precast Concrete Beam-to Column Connections Subject to Cyclic Loading," PCI JOURNAL, v. 38,
No. 4, July-August 1993, pp. 80-92.
Cleland, N. M., "Design for Lateral Force Resistance With Precast Concrete Shear Walls," PCI JOURNAL, V. 42, No. 5,September-
October 1997, pp. 44-63.
Cleland, N. M., and Ghosh, S. K., “Untopped Precast Concrete Diaphragms in High-Seismic Applications,” PCI JOURNAL, V. 47, No. 6,
November-December 2002, pp. 94-99.
Clough, D. P., "Considerations in the Design and Construction of Precast Concrete Diaphragms for Earthquake Loads," PCI
JOURNAL, V. 26, No.2, March-April 1982, pp. 78-93.
Design of Unbonded Post-Tensioned Precast Concrete Walls, "PCI JOURNAL, V. 44, No.3, May-June 1999, pp. 72-89.
Englekirk, R. E., "Overview of the ATC Seminar on Design of Prefabricated Concrete Buildings for Earthquake Loads." PCI JOURNAL,
V. 27, No. 1, January-February 1982, pp. 80-96.
Farrow, K. T., and Fleischman, R. B., 2003, “Effect of Dimension and Construction Detail on the Capacity of Diaphragms in Precast
Parking Structures,” PCI JOURNAL, V. 48, No. 5, Sept.-Oct., pp. 46-61.
Farrow, K. T., Fleischman, R. B., “Effect of Dimension and Construction Detail on the Capacity of Diaphragms in Precast Parking
Structures,” PCI JOURNAL, V. 48, No. 5, September- October 2003, pp. 46-61.
Fintel, Mark. "Ductile Shear Walls in Earthquake Resistant Multi story Buildings." ACI Journal, Proceedings V. 71. No. 6. June 1974.
pp, 296-305.
Fintel, Mark. "Modem Concrete Structures Survive Romanian Earthquake." eMI Engineering - ASCE. V. 48. No.10. October 1978. pp.
80-81.
Fintel, Mark. "Performance of Precast and Prestressed Concrete in Mexico Earthquake:' PCI JOURNAL. V. 31. No. I. January-
February 1986. pp. 18-42. (See also Discussion in November December 1986 PCI JOURNAL. pp.143-144.)
Fintel, Mark. "Performance of Precast Concrete Structures During Rumanian Earthquake of March 4, 1977," PCI JOURNAL, V. 22.
No.2. March-April 1977. pp. 10-15.
Fleischman, R. 8 . Sause. R., Pcssiki. s. and Rhodes, A. B . "Seismic Behavior of Precast Parking Structure Diaphragms." PCI JOURNAL.
V. 43. No. I, January-February 1998. pp. 38-53.
Fleischman, R.B., Naito, C., Restrepo, J., Sause, R., and Ghosh, S.K., "Precast Diaphragm Seismic Design Methodology Research
Project, Part II: Research Program," PCI Journal, V. 50, No.6, November-December 2005.
Fleischman, R.B., Naito, C., Restrepo, J., Sause, R., and Ghosh, S.K.,. "Precast Diaphragm Seismic Design Methodology Research
Project, Part I: Design Framework," PCI Journal, V. 50, No.5, September-October 2005.
Foerster, H. R .Rizkalla. S. H .and Heuvel. J. S . "Behavior and Design of Shear Connections for Load· bearing Wall Panels." PCI
JOURNAL,V. 34, No. I. January-February 1989, pp. 102- 11 9.
Ghosh and N.M. Hawkins, “Seismic Design Provisions for Precast Concrete Structures inACI 318.” PCI Journal,Vol. 46, No. 1,
January–February 2001, pp. 28–32.
Ghosh, S. K .. Nakaki, S. 0 and Krishnan, K., "Precast Structures in Regions of High Seismicity: 1997 UBC Design Provisions," PCI
JOURNAL, V. 42, No.6, November-December1997. pp. 76-9 1.
Ghosh, S. K., "Observations on the Performance of Structures in the Kobe Earthquake of January 17, 1995," PCI JOURNAL,V.40,
No.2. March-April 1995, pp. 14-22.
Ghosh, S. K., and Cleland, N. M., "Untopped Precast Concrete Diaphragms in High-Seismic Applications," PCI JOURNAL, V. 47, No.6,
November-December 2002, pp. 94-99.
Ghosh, S.K. and Dowty, S. 2003. The Seismic Design Provisions of the 2003 Edition of the International Building Code. PCI Journal,
V. 48, NO.3 (May-June): pp. 92-95. ~
Harry H. Edwards Award Winner: The PRESSS Five-Story I'recast Concrete Test Building, University of California at San Diego, La
Jolla, California," I'CI JOURNAL, V. 46, No. S, September-October 2001, pp. 20-26
Hawki ns. N. M .• "State-of-the-Art Report on Seismic Resistance of Precast Concrete Structures - Part 2: Precast Concrete:' PCI
JOURNAL,V. 23. No. I, January-February 1978. pp.40-58.
Hawkins, N. M., and Ghosh, S. K., "Proposed Revisions to 1997 NEHRP Recommended Provisions for Seismic Regulations for Precast
Concrete Structures, Part 1: Introduction," PCI JOURNAL, V. 45, No.3, May-June 2000, pp. 74-77.
Hawkins, N. M., and Ghosh, S. K., “Proposed Revisions to 1997 NEHRP Recommended Provisions for Seismic Regulations for Precast
Concrete Structures: Part 3 – Diaphragms,” PCI JOURNAL, V. 45, No. 6, November- December 2000, pp. 50-59.
Hawkins, N., and Ghosh, S., “Acceptance Criteria for Special Precast Concrete Structural Walls Based on Validation Testing,” PCI
JOURNAL, V. 49, No. 5, September-October 2004, pp. 78-92.
Hawkins. N. M .• M "Seismic Resistance of Prestressed and Precast Concrete Structures." PCI JOURNAL. V. 22. No.6. November.
December 1m. pp. 80-110.
Hawkins. Neil M .. " Precast Concrete Connections." Proceedings. U.S.-PRC Workshop. 1981. pp. 28-42.
Hawkins. Neil M., "State of the Art Report on Seismic Resistance of Prestressed and Precast Concrete Structures."PCI JOURNAL: V.
22. No. 6. November-December 1977. pp. 80-110. and V. 23. No. l. January. February 1978. pp. 40-58.
Iverson, J. K., and Hawkins, N. M., "Performance of Precast/Prestressed Concrete Building Structures During Northridge
Earthquake," PCI JOURNAL, V. 39, No.2, March-April 1994, pp. 38-55.
Iverson. James K .. "First Impressions of Earthquake Damage in San Francisco Area." PCI JOURNAL. V. 34. No. 6. November-
December 1989. pp .108- 124.
Kianoush. M. R., and Scanlon, A . "Behavior of Large Panel Precast Coupled Shear Wall Systems:' PCI JOURNAL. v. 33, No. 5,
September October1988, pp. 124- 153.
Kurama, Yahya C. 2002. Design of Rectangular Openings in Precast Walls under Combined-Vertical and Lateral Loads. PCI Journal,
V. 47, NO.2 (March-April): pp. 36-59.
Low, S-G .. Tadros, M. K .. and Nijhawan. J. C .. "Minimization of Floor Thickness in Precast Prestressed Concrete Multistory
Buildings:' PCI JOURNAL. v. 36. No.4. July-August 199 1. pp. 74-92.
Mackertich. S . and Aswad, A., "lateral Defonnations of Perforated Shear Walls for Low and Mid-Rise Buildings," PCI JOURNAL, V.
42, No. I , January-February 1997, pp. 30-41.
Manin. Leslie D . and Korkosz. W. J ."Connections for Precast Prestressed Concrete Buildings - Including Earthquake Resistance"
Technical Repart No. 2. PrecastI Prestressed Con-PCI JOURNAL.
Mast, R. F" "A Precast Concrete Frame System for Seismic Zone Four," PCI JOURNAL, V. 37, No. I, January February 1992, pp. 50-64.
Mattock and N. M. Hawkins, “Shear Transfer in Reinforced Concrete—Recent Research,” PCI Journal, Vol. 21, No. 1,
January–February 1976, pp. 20–39.
Mattock, A. H ..1979. Flexural Strength of Prestressed Concrete Sections by Programmable Calculator. PCI Journal, V. 24, NO.1: pp.
26-37.
Mattock, A. H., and T. S. Theryo. 1986. Strength of Members with Dapped Ends. PCI Journal, V. 31, No. 5 (September–October): pp.
58–75.
Mattock. A. H . and Hawnns, N. M . "Shear Transfer in Reinforced Concrete _ Recent Research." PCI JOURNAL. V. 17. No. 2. March-
April 1972. pp. 55-75.
Mattock. A. H .. Johal. L. and Chow.H. C, "Shear Transfer in Reinforced Concrete with Moment or Tension Acting Across the Shear
Plane," PCI JOURNAL. V. 20. No.4. July-August 1975. pp. 76-93
Mejia. J. C, and Park. R" ''Tests on Special Reinforcement for the End Support of Hollow-Core Precast Concrete Floor Units," PCI
JOURNAL,V. 39, No.5, September-October 1994. pp. 90- 105.
Moustafa, S. E., " Effectiveness of Shear-Friction Reinforcement in Shear Diaphragm Capacity of Hollow Core Slabs: PCI JOURNAL, v.
26, No. I. January-February 1981,pp. 11 8.132.
Muguruma, H., M. Nishiyama, and F. Watanabe. 1995. Lessons from the Kobe Earthquake—A Japanese Perspective. PCI Journal, V.
40, No. 4 (July–August): pp. 28–42.
Oliva, M. G . Clough. R. W . and Malhas.F . "Seismic Behavior of Large Panel Precast Walls: Analysis and Experiment, "PCI JOURNAL,
V. 34, No.5,Scptember-October 1989, pp. 42-67.
Palmieri, L., and French. C, "Ductile Moment.Resisting Connections for Pre<:asl Frames in Seismic Regions: Numerical Simulation,"
Manuscript submitted to PCI JOURNAL for publication.
Park, R., “A Perspective on the Seismic Design of Precast Concrete Structures in New Zealand,” PCI JOURNAL, V. 40, No. 3, May-
June 1995, pp. 40-60.
Park, R., and Bull, D. K., “Seismic Resistance of Frames Incorporating Precast Prestressed Concrete Beam Shells,” PCI JOURNAL,
V.‑31, No. 4, July-August 1986, pp. 54-93.
Park, R., and K. J. Thompson. 1977.Cyclic Load Tests on Prestressed and Partially Prestressed Beam-Column Joints. PCI Journal, V.
22, No. 5 (September–October): pp. 84–110.
PCI Ad Hoc Committee on Precast Walls, "Design for Lateral Force Re-sistance with Precast Concrete Shear Walls," PCI JOURNAL. v.
42, No.5, September-October 1997. pp. 44-65.
PCI Committee on Tolerances. "Tolerances for Precast and Prestressed Concrete, "PCI JOURNAL. V. 30, No. I ,January· February
1985. pp. 26-1 12.
Pekau, O. A., and Hum, D., "Seismic Response of Friction-Jointed Precast Panel Shear Walls," PCI JOURNAL, V. 36, No.2, March-April
1991, pp. 56-71.
Priestley, M. J . N., Stanton, J. F., and Sritharan, S. 1999. An Overview of the PRESSS Five-Story Precast TestBuilding. PCI
Journal, V. 44, NO.2 (March-April): pp. 26-39.
Priestley, M. J. N., and MacRae, G. A .. "Seismic Tests of Precast Beam-to Column Joint Subassembl3ges with Unbonded Tendons,"
PCI JOURNAL, V. 41, No. I, January-February 1996, pp. 64-8 1.
Rizkalla. S. H . Serrelle, R. L .Heuvel. J. S., and All iogbe. E. K ."Multiple Shear Key Connections for Precast Shear Wall Pane ls." PCI
JOURNAL, V. 34 , No.2, March April 1989. pp. 104- 120.
Rodríguez, M., and Blandón, J., “Tests on a Half-Scale Two-Story Seismic- Resisting Precast Concrete Building,” PCI JOURNAL, V. 50,
No. 1, January- February 2005, pp. 94-114.
Rostasy, F. S., “Connections in Precast Concrete Structures –Continuity in Double-T Floor Construction,” PCI JOURNAL, V. 7, No. 4,
1962, pp. 18-48.
Salmons, 1. R .• "Research Needs of t:he Precast Prestressed Concrete Industry,"' PCI JOURNAL, V. 26. No.6. November-December
1981. pp.22-30.
Scanlon. Andrew. and Kianoush. Reza M .. "Behavior of Large Panel Precast Coupled Wall Systems Subjected to Earthquake
Loading," PCI journal, V. 33. No.5, September-October 1988. pp. 124- 151
Schlaich, J., Schäfer K., and Jennewein M., “Toward a Consistent Design of Structural Concrete,” PCI JOURNAL, V. 32, No. 3, May-
June 1987,pp. 74-150.
Serrette, H. R., Rizkalla, S. H., Attiogbe, E., and Heuvel, J. S., "Multiple Shear Key Connections for Precast Shear Wall Panels," PCI
JOURNAL, V. 34, No.2, March-April 1989, pp. 104-120.
Shahawy, M. and Cal, C. S. 2001. Enhancement of the Performance of Prestressed Concrete Bridge Girders Using Strand
Anchoraqe. PCI Journal, V. 46, No.5 (September-October): pp. 82-97.
Shaikh A.F. and Feile E.P.,2004, “Load Testing of a Precast Concrete Double Tee Flange Connector”, PCI Journal, V.49, No.3, 49
May-June, pp. 84-94.
Shaikh, A. F., and W. Yi. 1985. In-Place Strength of Welded Headed Studs. PCI Journal, V. 30, No. 2 (March–April): pp. 56–81.
Soudki, K. A . West. 1. S., Rizkalla, S. H . and Blackett. B . '"Horizontal Connections for Precast Concrete Shear Wall Panels Under
Cycl ic Shear Loading," PCI JOURNAL. v. 41. No.3, May-June 1996, pp.64-80. ,
Soudki. K. A . West, J. S., Riz.kalla. S. H., and Blacken. B ."Horizontal Connections for Precast Concrete Shear Wall Pan· els Under
Cyclic Shear Loading." PCI JOURNAL, V. 41. No.3, May .June 1996, pp. 64-80.
Spencer, R. A., and Neille, D. S., “Cyclic Tests of Welded Headed Stud Connections,” PCI JOURNAL, V. 21, No. 3, May-June 1976, pp.
70-81.
Speyer, I. J. 1976. Considerations for the Design of Precast Concrete Bearing Wall Buildings to Withstand Abnormal Loads. PCI
Journal, V. 21, No.2 (March-April): pp. 18~51 .
Stanton, 1., Stone W. c., and Cheok, G. 5., "A Hybrid Rein-forced Precast Frame for Seismic Regions," PC! JOURNAL, V. 42, No.2,
March-April 1997, pp. 20-32
Stanton, J . F., Anderson, R. G., Dolan, C. W. and McCleary, D. E. 1987. Moment Resistant Connections and Simple Connections.
PCI Journal, V. 32, No.2 (March-April): pp. 62-74.
Strigel, R. M., Pincheira, J. A., and Oliva, M. G., “Reliability of 3/8 in. Stud-Welded Deformed Bar Anchors Subject to Tensile Loads,”
PCI JOURNAL, V. 45, No. 6, November-December 2000, pp. 72-82.
Yee. A. A . "Design Considerations for Precast Prestressed Concrete Building Structures in Seismic Areas."PCI JOURNAL. v. 36, No.3.
May June 1991. pp. 40-55.
Ellglekirk, . "U.S Japan Seminar on Precast Concrete in Seismic zones designer's Viewpoint of Seminar," PCI Journal, V. 32, 2,
March-April 1987, pp. 78-85.
F1eischman, R. B . Sause, R . Pessiki. S . and Rhodes. A. B . "Seismic Behavior of Precast Parking Structure Diaphragms." PCI
JOURNAL. V. 43. No. I. January- February 1998. pp. 38·S3.
Fleischman R.B., Naito C.J., Restrepo J., Sause R., Ghosh S.K., Wan G., Schoettler M. and Cao L., 2005b, "Seismic Design
Methodology for Precast Concrete Diaphragms, Part 2: Research Program", PCI Journal, V. 51, No. 6, Nov.-Dec. pp. 2-19.
Fleischman, R. B., and Farrow, K. T., “Seismic Design Recommendations for Precast Concrete Diaphragms in Long Floor Span
Construction,” PCI JOURNAL, V. 48, No. 6, November-December 2003, pp. 46-62.
Hofheins, C. L., Reaveley, L. D, and Pantelides, C. P., "Behavior of Welded Plate Connections in Precast Concrete Panels Under
Simulated Seismic Loads", PCI Journal, V. 47, No.4, July-August 2002, pp. 122-133.
Kenneth T. Farrow and Robert B. Fleischman Effect of Dimension and Detail on the Capacity of Precast Concrete Parking Structure
Diaphragms -, PCI Journal, September-October 2003, pp. 46-61
Pincheira, J. A., Oliva, M. G., and Kusumo-Rahardjo, F. I., "Tests on Double Tee Flange Connectors Subjected to Monotonic and
Cyclic Loading," PCI JOURNAL, V. 43, No.3, May-June 1998, pp. 82-96.
Pincheira, J.A., Oliva, M.G., and Zheng, W., 2005, “Behavior of Double-Tee Flange Connectors Subjected to In-Plane Monotonic and
Reversed Cyclic Loads,” PCI Journal, V.50, No.6, Nov.-Dec., pp. 32-54.
Wood, S. L., Stanton, J. F., and Hawkins, N. M., “New Seismic Design Provisions for Diaphragms in Precast Concrete Parking
Structures,” PCI JOURNAL, V. 45, No. 1, January-February 2000, pp. 50-65.
Zheng, W., and Oliva, M.O. 2005, “A Practical Method to Estimate Elastic Deformation of Precast Pretopped Double Tee
Diaphragms”, PCI Journal V.50, No.2, March-April, pp.44-55.
Doh n. C. W., Stanton. J. F .. and Anderson. R. G .. "Moment Resistant Con nect ions and Simple Connections." PCI JOURNAL. V. 32.
No.2.March-April 1987, pp. 62-74.
El-Sheikh, M. T., Sause, R., I'essiki, 5., and Lu, L. W., "Seismic Behavior of Unbonded Post-Tensioned Precast Concrete Frames," PCI
JOURNAL, V. 44, No.3, May-lune 1999, pp. 54-71.
Priestley, M. 1. N., and MacRae, R. G., "Seismic Tests of Pre-cast Beam-to-Column loint Subassemblages with Unbonded Tendons,"
PCI JOURNAL, V. 41, No. I, January-February 1996, pp. 64-81.
Ochs, Jay E., and Ehsani , Mohammad R., "Moment Resistant Connections in Precast Concrete Frames for Seismic Regions," PCI
JOURNAL,m3g, No.5, September-October 1993. pp. 75.
Pries tley. M. J. N .. and Tao. J. R. , "Seismic Response of Precast Prestressed Concrete Frames With Partially Debonded Tendons,"
PCI Journal. V. 38. No. I. January February 1993. pp. 58-69.
Restrepo, J. I., Park, R., and Buchanan, A. H., “Design of Connections of Earthquake Resisting Precast Reinforced Concrete
Perimeter Frames of Buildings,” PCI JOURNAL, V. 40,No. 5, September-October 1995, pp. 68-77.
Restrepo, J. I., Park, R., and Buchanan, A. H., “Tests on Connections of Earthquake Resisting Precast Reinforced Concrete Perimeter
Frames of Buildings,” PCI JOURNAL, V. 40, No.4, July-August 1995, pp. 44-61.
Stanton. J. F., Stone, W. C .. and Cheok, G. S., "A Hybrid Reinforced Precast Frame for Seismic Regions," PCI JOURNAL, V. 42, No.2,
March· April 1991, pp. 20·32.
Nakaki, S. D., and Englekirk, R. E., "PRESSS Industry Seismic Work-shops: Concept Development," PCI JOURNAL, V. 36, No.5,
September-October 1991, pp. 54-61.
Nakaki, S. D., Stanton, 1. F., and Sritharan, S., "An Overview of the PRESSS Five-Story Precast Test building," PCI JOURNAL,V. 44,
No.2, March-April 1999, pp. 26-39.
Priestley, M. 1. N., "Overview of PRESSS Research Program," PCI JOURNAL, V. 36, No.4, July-August 1991, pp. 50-57.
Priestley, M. J. N., “The PRESSS Program – Current Status and Proposed Plans for Phase III,” PCI JOURNAL, V. 41, No.2, March-April
1996, pp. 22-40.
Priestley, M. J. N., Sritharan, S., Conley, J. R., and Pampanin,S., “Preliminary Results and Conclusions From the PRESSSFive-Story
Precast Concrete Test Building,” PCI JOURNAL,V. 44, No. 6, November-December 1999, pp. 42-67.
Stanton, J. F., Hawkins, N. M., and Hicks, T. R., “PRESSS Project 1.3: Connection Classification and Evaluation,” PCI JOURNAL, V. 36,
No. 5, September-October 1991, pp. 62-71.
Allen, M., and Kurama, Y., "Design of Rectangular Openings in Precast Walls Under Combined Vertical and Lateral Loads," PCI
JOURNAL, V. 47, No.2, March-April 2002, pp. 58-83.
Aswad, G., Djazmati, B . and Aswad, A., "Comparison of Shear Wall Deformations and Forces Using Two Approaches," PCI
JOURNAL, V. 44, No. I, January-February 1999, pp. 34-46.
Crisafulli, F. J., Restrepo, J. I., and Park, R., “Seismic Design of Lightly Reinforced Precast Concrete Rectangular WallPanels,” PCI
JOURNAL, V. 47, No. 4, July-August 2002, pp.104-121.
Fintel, Mark. "Performance of Buildings With Shear Walls in Earthquakes of the Last Thirty Years." PCI JOURNAL, V. 40. No.3. May·
June 1995.pp. 62-8O.
Hutchinson, R, Rizkalla, S., Lau, M., and Heuvel, S., "Horizontal Post-Tensioned Connections for Precast Concrete Loadbearing Shear
Wall Panels," PCI JOURNAL, V. 36, No.6, November-December 1991, pp. 64-76.
Kurama, Y., “Hybrid Post-Tensioned Precast Concrete Walls for Use in Seismic Regions,” PCI JOURNAL, V. 47, No. 5,September-
October 2002, pp. 37-59.
Kurama, Y., Pessiki, S., Sause, R., and Lu, L.W., “Seismic Behavior and Design of Unbonded Post‑Tensioned Precast Concrete Walls,”
PCI JOURNAL, V. 44, No. 3, May‑ June 1999, pp. 72‑89.
Perez, F. J., Pessiki, S., and Sause, R., “Lateral Load Behavior of Unbonded Post-Tensioned Precast Concrete Walls with Vertical
Joints,” scheduled for publication in the March-April 2004 PCI JOURNAL.
Perez, F., Pessiki, S., and Sause, R., “Seismic Design of Unbonded Post- Tensioned Precast Concrete Walls with Vertical Joint
Connectors,” PCI JOURNAL, V. 49, No. 1, January-February 2004, pp. 58-79.
Soudki, K. A., Rizkalla S. H., and LeBlanc, B., "Horizontal Connections for Precast Concrete Shear Walls Under Cyclic Deformations -
Part 1: Mild Steel Connections," PCI JOURNAL, V.40, No.4, July-August 1995, pp. 78-96.
Soudki, K. A., Rizkalla, S. H . and Diakiw, R. W., "Horizontal Connections for Precast Concrete Shear Walls Subjected to Cyclic
Deformations, Part 2: Prestressed Connections," PCI JOURNAL, V. 40. No. 5. September-October 1995.pp. 82-95.
Englekirk, R. E., " Development and Testing of a Ductile Connector for Precast Concrete Beams and Columns " PCI Journal, Vol. 40,
No. 2, March–April, 1995, pp. 36–51.
Englekirk, R. E., "An Analytical Approach to Establishing the Seismic Resistance Available in Precast Concrete Frame Structures." PCI
JOURNAL.V. 34. No. I. January-February 1989. pp. 92-101.
Englekirk, R. E., "Overview of PCI Workshop on Effective Use of Precast Concrete for Seismic Resistance." PCI JOURNAL, V. 31, No.6.
November-December 1986, pp. 48-58.
Englekirk, R. E., "Seismic Design Considerations for Precast Concrete Multistory Buildings." PCI JOURNAL.35, No.3. May-June
1990.pp. 40-51 .
Englekirk, R. E., 1987. Concepts for the Development of Earthquake Resistant Ductile Frames of Precast Concrete. PCI Journal, V.
32, No. 1 (January–February):pp. 30–48.
Englekirk, R., “Design-Construction of The Paramount—A 39-Story Precast Prestressed Concrete Apartment Building,” PCI
JOURNAL, V. 47, No. 4, July-August 2002, pp. 56-71.
Hawkins, N., and R. Englekirk. 1987. U.S.–Japan Seminar on Precast Concrete Construction in Seismic Zones. PCI Journal, V. 32, No.
2 (March–April): pp. 75–85.
ACI-ASCE Committee 326. "Shear and Diagonal Tension," ACI Journal. V. 59. No.1. January 1962. pp. 1· 30: No. 2, February 1962. pp. 227-334: and No.3. March 1962. pp.352-396.
ACI-ASCE Committee 352. "Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures." ACI Journal Proceedings. V. 82. No.3. May-June 1985. pp. 266-281
Bhatt. P .. and Kirk. D. W .• "Test~ on Improved Beam-Column Connection for Precast Concrete," ACI Journal, Proceedings. V. 82, No.6. November December 1985. pp. 834-843.
Blakeley, R. W. G., and R. Park. 1971 Seismic Resistance of Prestressed Concrete Beam-Column Assemblies. ACI Journal, V. 68, No. 9 (May): pp. 677–692.
Bresler, B . and Pister, K. S . "Strength of Concrete Under Combined Stresses," ACI Journal. V. 55, No.3. September 1958. pp. 321· 345,
Fintel, Mark, "Ductile Shear Walls in Earthquake Resistant Multistory Buildings," ACI Journal, V. 71, No.6,June 1974, pp. 296-305 (PCA Publication EB-076.0lD, II pp.).
Fintel, Mark, "Report of the Earthquakes of May 24 and June 20, 1978, Salonika, Greece," ACI Journal, V. 75,No. 10, October 1978, pp. N9-NIO.
Fintel, Mark, "Report on the Romanian Earthquake of March 4, 1977," ACI Journal, V. 74, No. 10, October 1977, pp. N8-NIO.
Fintel, Mark, and Ghosh, S. K., "Case Study of A seismic Design of a 16- Story Coupled Wall Structure Using Inelastic Dynamic Analysis," ACI Journal, V. 79, No.3, May-June 1982, pp. 171-179. See also Discussion in ACI Journal, V. 80, No.2, MarchApri11983,pp. 151-152.
Fintel, Mark, and Ghosh, S. K., "Explicit Inelastic Dynamic Design Procedure for seismic Structures," ACI Journal, V. 79, No.2, March-April 1982, pp. 110-118. See also Discussion in ACI Journal, V. 80, No.1,January-February 1983, pp. 60-62.
Hofbed. 1. A . Ibrahim. I. 0 . and Matlock. A. H. "Shear Transfer in Reinforced Concrete." ACI Journal. V. 66, No. 2, February 1969. pp. 119- 128.
Marti, P., "Basic Tools of Reinforced Concrete Design," ACI Journal, V. 82, No.1, January-February 1985, pp. 46-56.
Mina. S. A . and MacGregor, J. G . "Strength and Ductility of Concrete Slabs Reinforced with Welded Wire Fabric." ACI Journal. V. 78, No.5, September· October 198 1. pp. 374-38 1.
Minor, J., and Jirsa, J., “Behavior of Bent Bar Anchorages,” ACI Journal, April 1975, pp. 141-149.
Nakashima, M., T. Huang, and L. W. Lu. 1982. Experimental Study of Beam-Supported Slabs under In-Plane Loading. ACI Journal, V. 79, No.1 (January–February): pp. 59–66
Paulay, T.. "Lap Splices in Earthquake Resisting Columns," ACI Journal ,V. 79, No. 6, November-December 1982, pp. 459-469.
Pillai. S. U .. and Kirk. D. W., "Ductile Beam-Column Connect ion for Pre<:ast Concrete," ACI Journal, Proceedings. V. 78. No.6. November December 1981. pp. 480-487.
ACI-ASCE Committee 326. "Shear and Diagonal Tension," ACI Journal. V. 59. No.1. January 1962. pp. 1· 30: No. 2, February 1962. pp. 227-334: and No.3. March 1962. pp.352-396.
ACI-ASCE Committee 352. "Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures." ACI Journal Proceedings. V. 82. No.3. May-June 1985. pp. 266-281
Bhatt. P .. and Kirk. D. W .• "Test~ on Improved Beam-Column Connection for Precast Concrete," ACI Journal, Proceedings. V. 82, No.6. November December 1985. pp. 834-843.
Blakeley, R. W. G., and R. Park. 1971 Seismic Resistance of Prestressed Concrete Beam-Column Assemblies. ACI Journal, V. 68, No. 9 (May): pp. 677–692.
Bresler, B . and Pister, K. S . "Strength of Concrete Under Combined Stresses," ACI Journal. V. 55, No.3. September 1958. pp. 321· 345,
Fintel, Mark, "Ductile Shear Walls in Earthquake Resistant Multistory Buildings," ACI Journal, V. 71, No.6,June 1974, pp. 296-305 (PCA Publication EB-076.0lD, II pp.).
Fintel, Mark, "Report of the Earthquakes of May 24 and June 20, 1978, Salonika, Greece," ACI Journal, V. 75,No. 10, October 1978, pp. N9-NIO.
Fintel, Mark, "Report on the Romanian Earthquake of March 4, 1977," ACI Journal, V. 74, No. 10, October 1977, pp. N8-NIO.
Fintel, Mark, and Ghosh, S. K., "Case Study of A seismic Design of a 16- Story Coupled Wall Structure Using Inelastic Dynamic Analysis," ACI Journal, V. 79, No.3, May-June 1982, pp. 171-179. See also Discussion in ACI Journal, V. 80, No.2, MarchApri11983,pp. 151-152.
Fintel, Mark, and Ghosh, S. K., "Explicit Inelastic Dynamic Design Procedure for seismic Structures," ACI Journal, V. 79, No.2, March-April 1982, pp. 110-118. See also Discussion in ACI Journal, V. 80, No.1,January-February 1983, pp. 60-62.
Hofbed. 1. A . Ibrahim. I. 0 . and Matlock. A. H. "Shear Transfer in Reinforced Concrete." ACI Journal. V. 66, No. 2, February 1969. pp. 119- 128.
Mina. S. A . and MacGregor, J. G . "Strength and Ductility of Concrete Slabs Reinforced with Welded Wire Fabric." ACI Journal. V. 78, No.5, September· October 198 1. pp. 374-38 1.
Nakashima, M., T. Huang, and L. W. Lu. 1982. Experimental Study of Beam-Supported Slabs under In-Plane Loading. ACI Journal, V. 79, No.1 (January–February): pp. 59–66
Paulay, T.. "Lap Splices in Earthquake Resisting Columns," ACI Journal ,V. 79, No. 6, November-December 1982, pp. 459-469.
Pillai. S. U .. and Kirk. D. W., "Ductile Beam-Column Connect ion for Pre<:ast Concrete," ACI Journal, Proceedings. V. 78. No.6. November December 1981. pp. 480-487.
Fintel, Mark, and Ghosh, S. K., "Case Study of A seismic Design of a 16- Story Coupled Wall Structure Using Inelastic Dynamic Analysis," ACI Journal, V. 79, No.3, May-June 1982, pp. 171-179. See also Discussion in ACI Journal, V. 80, No.2, MarchApri11983,pp. 151-152.
Fintel, Mark, and Ghosh, S. K., "Explicit Inelastic Dynamic Design Procedure for seismic Structures," ACI Journal, V. 79, No.2, March-April 1982, pp. 110-118. See also Discussion in ACI Journal, V. 80, No.1,January-February 1983, pp. 60-62.