Procedure

Published on January 2017 | Categories: Documents | Downloads: 43 | Comments: 0 | Views: 473
of 3
Download PDF   Embed   Report

Comments

Content

Procedure Text Examples : How to charge hand phone battery prepare your : - hand phone - battery charger

Steps : 1. Connect the charger to your hand phone, the flash symbol on the charger plug must face upward. 2. Wait until the battery icon appears on the screen. 3. Charge the battery approximately 5 hours or until the battery icon indicates that the battery is fully charged. 4. Remove the charger by pulling out from your hand phone. Example of Procedure Text title : How to wash a Car First, The materials needed are a sachet of car shampoo, a sponge/a sheet of cloth, plas chamois,and water. Then,Prepared water, moisten the body of car.make sure that all of the body became moist. Next, a sachet of car shampoo is poured into 2-3 liter of pure water.Then, the mixture is stirred up by using a hand. After that, the car is cleaned up by using a sponge with the mixture of shampoo and pure water.Next, the body is rinsed off by water, till it is clean. that's all about example of procedure text, thanks Finally, dried up the body by using a plas chamois.When the body looks shine, the car is ready to be used.It is easy, isn¶t it??,....

Email This Procedure text is kind of text which teaches on how to make something completely. Procedure text is dominantly structured with imperative sentence since it actually an instruction. Procedure text usually explain the ingredient or material which is need, though sometime it is omitted, after that procedure text will explain step by step how to make the thing. See the following example of procedure text!

The Procedure of Making Meatballs ingredients :
y y y y y y y

1 kilo of very fine minced meat (preferably beef) 2 eggs 300 grams of tapioca-flour 4-8 cloves of garlic 1 red onion 1 teaspoon of white pepper 2 teaspoons of salt

Steps :
y y y y y y

First of all,mix garlic, red onion, salt, and white pepper in a mortar or mixer. Second step, mix the spice-mixture with the eggs, the tapioca-flour and the minced meat. After that, use your fingers, add a cup of water, and keep on working until the mixture feels soft and smooth. Then, boil some water in a rather large pot, at least about 2 liters. Next step, start rolling the mixture into small meatballs. Finally, lower the meatballs into the boiling water. When they float up to the surface the meatball are ready to serve.

Email This BlogThis! Procedure Text : Title : Making Candles Tool and Ingredient :
y y y y y

wax moulds, wick, dye discs, essential oils, and a double boiler.

Steps :

y y

First of all, melt the wax. All wax has a flash point, so to prevent it bursting into flames, you must melt it in a double boiler, with water in the bottom pan. Then, prepare the mould with the wick. Thread the wick through the mould and make sure that you leave a good few centimetres sticking out of the hole in the bottom.

y

y y y y

After that, add the scent. If you want a scented candle, add a few drops of essential oil to the melted wax. You can use any essential oil you like, as long as it doesn't contain water. Next step, pour the wax into the mould. Try and tip the wax into the mould quickly, all in one go, to minimise spillage and air bubbles. Then, release the bubbles and top it up. Releasing the air bubbles will eventually make the candle sink, so you will need to top it up with more melted wax. Finally, remove it from the mould. After four or five hours, the candle can be taken out of its mould. Your candle is now ready for display. Remember, you must always leave it for a day before lighting it. y How to insert SIM Card Cellphone Cellphone is a modern communication device which connects one to the others by voice, written message and data. However this device can not work until the SIM card is inserted. When inserting the SIM Card to cellphone, make sure that the cellphone has been switched off and follow the direction bellow: First of all, press the locking catch and slide the cover then lift it off the phone. After that, push two catches in the opposite directions and remove the battery. Next, slide the SIM card carefully into the slot and make sure that the golden connect arson are facing to the connector of the phone. Then, put the battery and align it until snaps into its place. Finally, insert the two catches of the back cover corresponding slot in the phone and slide the cover forward button of the phone until locks into place Don't forget to switch on the cellphone. Wait until it is ready to use.

y

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close