Qualifications

Published on March 2017 | Categories: Documents | Downloads: 60 | Comments: 0 | Views: 390
of 3
Download PDF   Embed   Report

Comments

Content

Qualifications :• • • • • • • • Male or Female, Thai nationality only, age between 24 - 30 years old Bachelor's degree or higher in Mechanical Engineer At least 3 years experience in fire fighting, P&ID, fire fighting layout and pipe support design related to refinery, Petrochemical or Power Plant Capable of producing fire fighting arrangement drawing, fire fighting isomatic drawing and material take-off Good working knowledge of NFPA code Familiar with fire fighting piping materials and design specifications for Refinery, Petrochemcal or Power Plant Good ability in Auto CAD Good communicatin in English, especially in reading and writting, require TOEIC 400 (if any)

Qualifications :• • • • • • • • Male or Female, Thai nationality only, age between 24 - 30 years old Bachelor's degree or higher in Mechanical Engineer At least 3 years experience in fire fighting, P&ID, fire fighting layout and pipe support design related to refinery, Petrochemical or Power Plant Capable of producing fire fighting arrangement drawing, fire fighting isomatic drawing and material take-off Good working knowledge of NFPA code Familiar with fire fighting piping materials and design specifications for Refinery, Petrochemcal or Power Plant Good ability in Auto CAD Good communicatin in English, especially in reading and writting, require TOEIC 400 (if any)

• Bachelor Degree in Mechanical Engineering or related field • 1-3 years in Mechanical Design (Piping) and Familiar with International standard (ASTM, ASME, ANSI, TEMA, API) • Construction Supervision Skill and Project Management skill is preferable • Good command in English • Good in Microsoft Office, AutoCAD, CAD Work

• • • • • • •

Bachelor’s degree or higher in Mechanical or Chemical Engineering with emphasis on thermodynamics and heat transfer 0-7 years experience related in this job description Having knowledge and skill in Computer programming will be an advantage Demonstrated leadership and organizational skills with the ability to prioritize and successfully take/direct appropriate action on multiple projects at the same time Strong people, technical and computer skills, proficiency with Microsoft Applications (Words, Excel, etc) Good command of English Proactive, must be self motivated, have a positive attitude and is experienced in contributing individual efforts toward team goals

• • • • • • • •

Thai Nationality only Male/Female Bachelor Degree in Mechanical Engineering or related field from well recognized University Ability to work well in team environment as well as independently Strong English verbal and written communications skills required Understand basis of mechanical equipment design Computer Literacy Skills Be able to work upcountry

• •

Bachelor or Master Degree in Mechanical Engineering Past Experience should include: o Extensive hands-on experience in design and detailed engineering of pressure vessels, columns, storage tanks & reactors. o Capable of independently producing design calculations and specifications, conducting drawing review and preparing MTO’s for estimating and fabrication purposes. o Must be familiar with design codes ASME Sec. VIII Div 1, Div 2, PD 5500 & API 620/650 o proficient with PV Elite, Code Calc. Tank Cal, Fin glow etc. o Good knowledge of selection and specification of matters such as CS + H IC, SS, clad, alloy and non-ferrous alloys. o Minimum 5 year experience in Engineering

Job Responsibilities :• • • • • Static equipment design calculations Preparation of data sheets, specifications, MTOs for procurement of static equipments Evaluation, review and approval of vendor data Equipment sizing Co-ordination with other disciplines

• •

Bachelor or Master Degree in Chemical Engineering Past Experience should include: o Conceptual studies, FEED, detailed design & engineering for onshore / offshore oil and gas processing facilities / refinery process unit design o Should be familiar with HAZOP and design reviews o Should have been involved in pre-commissioning and commissioning procedures and activities. o Should be able to use process simulation software such as HYSYS, ProII, Pipesim, PipePhase etc. o is essential. Familiarity with Process Hazard / Risk Analysis is advantageous. Responsibilities will include development of PFD’s, P&ID’s, UFD’s & data sheet including sizing and specification equipment & instruments. o Minimum 5 year experience in Engineering

Job Responsibilities :• • Process Simulations Equipment sizing, line sizing, instrument sizing

• • • •

Preparation of equipment and instrument data sheets Preparation of operating manual, SAFE charts, C&E diagrams Participation in HAZOP, design reviews, Project technical reviews Co-ordination with other disciplines

Mechanical Engineer (Rotating Equipment) Requirement by tasks • • • • • • • • • • •

Post Date: 19-Oct-11

Work in Front-End Design and Detail Engineering projects. Preparation of machinery concepts in the international plant construction business Coordination of input from engineering disciplines Prepare and check Datasheets, Technical Specifications, Requisitions and Technical Bid Evaluations. Liaise with Inter-Disciplines, participate model review, full integrate mechanical requirement to overall project design. Raise and reply technical query between parties. Review and comment vendor documents, ensure that mechanical requirements are met Prepare and check lubrication lists, spare parts lists and incorporate recommendations Review and squad check engineering documents as applicable Witness final acceptance test at manufacturer’s test facilties Support start-up, commissioning and construction activities as required

Qualifications and Experiences • • • Mechanical Engineering Degree with 5+ years experience in one or more of the industry sectors, Oil & Gas, Refinery, Petrochemical and Clean Fuels. Knowledge of CAD and 3-D modeling with PDMS is a plus. Good knowledge in international Codes & Standards for machinery and machinery systems, material and relevant, API and ASME are minimums. Fair skills in English in speaking, reading and writing at least

• • • • • • •

Diploma or Bachelor’s Degree in Mechanical ,Industrial, Chemical, Electrical, Instrument , Design or related field The role involves leading small teams of designers and draftsmen in the preparation of CAD models, design drawings and shop drawings for onshore and offshore facilities. This will involve working closely and interacting with the relevant discipline engineers to develop technical solutions in an efficient and pro-active manner Minimum 2 years experience in Design mechanical/Piping/Electrical/Instrument in oil and gad field will be advantage Good communication and interpersonal skills New graduates are welcome

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close