Samsung Air Cond Manual

Published on December 2016 | Categories: Documents | Downloads: 33 | Comments: 0 | Views: 414
of 34
Download PDF   Embed   Report

Comments

Content


Air Conditioner
USER MANUAL
imaginethe possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
'%$
/s..-
/s.s-
/s.s-
/s..+-
(micro plasma ion) function
function generates hydrogen(H) and oxygen(O
2
) to attack undesirable air contaminants
such as bacteria, pollen, and odor. |t makes you breathe better as if you are staying around
waterfalls, ocean surf, rivers and mountains.
L
N
G
L
|
S
H
|
L
G
N
SLvLPL wAPN|NG S|GNS
Do not place the air conditioner near hazardous substances or equipment
that releases free flames to avoid fire, explosions or inìuries.
· Potential risk of fire hazard or explosion.
Do not install the outdoor unit at an unstable place or elevated surface
where there is potential risk of falling.
· |f the outdoor unit falls, it may cause personal inìury or loss of property.
Pailure or damage may occur if any changes or modification that is not
stated in the installation manual was performed. |n this case, user will be
responsible for the repair expenses.
|nstall the air conditioner away from direct exposure to sunlight, heating
apparatus, and humid places.
· Hang curtains on windows to boost cooling efficiency and to avoid the risk of electric
shock.
Do not cut the power plug and connect to a different power cable.
Do not yank the power cable and touch the power plug with hands.
· Potential risk of fire or electric shock.
Never use a damaged or dusted power plug, power cable, or loosened
power receptacle.
· Potential risk of fire or electric shock.
|nstall an exclusive circuit breaker and short-circuit breaker for the air
conditioner.
· Potential risk of electric shock or fire.
Do not insert anything such as fingers or branches into the air conditioner
vents while the air conditioner is running.
· Keep the children away from the air conditioner to prevent them from putting their finger
on the air conditioner. Potential risk of personal inìury.
Lnsure no water gets into the air conditioner.
· Potential risk or electric shock.
· |f the water gets into the air conditioner, stop and unplug the power source immediately.
Turn off the air conditioner using the provided remote control or control
accessory (if provided). Do not unplug to turn off the unit (unless there is an
immediate danger).
Do not run the air conditioner for an extended period of time in a room with
the door closed or with babies, elderly or disabled people.
· Open the door or windows to ventilate your room at least once an hour to prevent oxygen
shortage.
The air conditioner is composed of moving parts. Keep children away from
the unit to avoid physical inìury.
wAPN|NG
L
N
G
L
|
S
H
|
L
G
N
Make sure that children take precautions against access to the air
conditioner and they do not play with the unit.
Do not clean the interior of air conditioner on your own.
· ¥ou may damage the parts which can cause electric shock or fire.
· Consult contact center for cleaning the interior of the air condition er.
Do not connect the air conditioner with heating apparatus or attempt to
disassemble, remodel or repair it yourself.
· Potential risk of malfunction, electric shock or fire. |f repairs are needed, consult the
contact center.
Consult the place of purchase or contact center to install, reinstall or
disassemble the air conditioner.
· |mproper installation carries a risk of unit malfunction, water leakage, electric shock or fire.
· |f installing in specialty areas, such as a factory complex or saline coastal area, consult
the place of purchase or contact center for specific installation details.
· The units must be installed according to distances declared, in order to permit
accessibility from each side, either to guarantee correct operation of maintenance or
repairing products. The unit's parts must be reachable and removable completely under
safety condition (for people or things).
Consult a dealer regarding the appropriate measures to prevent the
allowable concentration from being exceeded.
· |f the refrigerant leaks, and cause the concentration limit to be exceeded, hazards due to
lack of oxygen in the room may result.
|f the indoor unit gets wet, turn the power off immediately and call your
nearest contact center.
· Potential risk of fire or electric shock.
Always make sure that the power supply is compliant with current safety
standards. Always install the air conditioner in compliance with current local
safety standards.
verify that the voltage and frequency of the power supply comply with the
specifications and that the installed power is sufficient to ensure the operation
of any other domestic appliance connected to the same electric lines.
Use a rated circuit breaker only.
· Never use steel wires or copper wires as a circuit breaker. |t may cause fire or unit
malfunctions.
Do not put undue stress or place heavy obìect on the power cable.
Do not bend the power cable excessively.
· Potential risk of fire or electric shock.
To protect the product from water and possible shock, you should keep the
power cable and the connection cord of the indoor and outdoor units in the
protection tube.
when opening or closing the front panel, use a stable stool and watch your
steps carefully.
Disconnect the air conditioner from power supply before it is repaired or
disassembled.
Clean the air conditioner after the inner fan stops operating.
· Potential risk of inìury or electric shock.
SAFETY INFORMATION _07
L
N
G
L
|
S
H
|
L
G
N
Do not touch the pipe connected to the air conditioner.
|nstall the indoor unit away from lighting apparatus using the ballast.
· |f you use the wireless remote control, reception error may occur due to the ballast of the
lighting apparatus.
|nstall the outdoor unit where operating noise and vibration will not disturb
your neighbor and in a well-ventilated area with no obstacle.
· Potential risk of malfunction.
· Operating noise may disturb your neighbor.
Make sure that there are no obstacles or covers that block the air conditioner.
Allow sufficient space for air circulation.
· |nsufficient ventilation may result in poor performance.
|f the power cable is damaged, the manufacturer or a qualified service
technician must replace it.
|f a power outage occurs while the air conditioner is working, turn off the
power source immediately.
Max current is measured according to |LC standard for safety and current is
measured according to |SO standard for energy efficiency.
Check for damage on delivery. |f damaged, do not install the air conditioner
and call the place of purchase immediately.
Keep indoor temperatures stable and not extremely cold, especially where
there are children, elderly or disabled people.
The packaging material and used batteries of the remote controller (optional)
must be disposed of in accordance with the national standards.
The refrigerant used in the air conditioner must be treated as chemical
waste. Dispose the refrigerant following national standards.
Have a qualified service technician install the air conditioner and perform a
trial operation.
Pirmly connect the drain hose to the air conditioner for proper water
drainage.
Check for damages on the outdoor unit installation pad at least once a year
· Potential risk of personal inìury or property loss.
when using a wireless remote control, the distance should not be more than
7 meters from the air conditioner.
|f the remote control is not used for a long period of time, remove the
batteries to prevent leakage of electrolyte.
when cleaning the outdoor unit, touch the heat exchanger radiator fins with
extreme care.
· wearing thick gloves can protect your hands.
Make sure that the condensed water dripping from the drain hose runs out
properly and safely.
The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety:
¥oung children should be supervised to ensure that they do not play with the
appliance.
safety information
CAUT|ON S|GNS
|nspect the condition, electric connections, pipes and external case of the
air conditioner regularly by a qualified service technician.
Do not open doors and windows in the room being cooled during operation
unless necessary.
Do not block the air conditioner vents. |f obìects block the air flow , it may
cause unit malfunction or poor performance.
Make sure there are no obstacles under the indoor unit.
ç Potential risk of fi re or loss of property.
Lnsure the off-on and protection switches are properly installed.
Do not use the air conditioner if damaged. |f problems occur, immediately
stop operation and disconnect the plug from the power supply.
|f the air conditioner will not be used for an extended period of time (for
example, over several months), unplug the power from the wall.
Call the place of purchase or a contact center if repairs are needed.
ç Potential risk of fi re or electric shock if disassembly or repairs are attempted by a
non-qualified service technician.
CAUT|ON

US|NG ADvANCLDPUNCT|ONS
l9
l9 Using the Turbo function
20 Setting timer
20 On timer
2l O timer
22 Combining On timer and O timer
23
24
mode m
25 Using the Smart Saver function
26 Using the Lvaporator Clean function
CLLAN|NG AND MA|NTA|N|NG
THL A|P COND|T|ONLP
27
27 Cleaning the lter
27 Cleaning the exterior
27 Air lter
28 8io lter
29 Peplacing the lter
29 Deodorizing lter
30 Maintaining your air conditioner
30 Periodical checks
m e t s y s l o r t n o c t i n u e h t a i v s n o i t c e t o r p l a n r e t n | l 3
APPLND|X
32
32 g n i t o o h s e l b u o r T
33 Operation ranges
25 Using the function
v|Lw|NG ¥OUP A|P COND|T|ONLP
l0
l0 y a l p s i d d n a t i n u r o o d n i e h t g n i k c e h C
s t r a p n i a M 0 l
y a l p s i D 0 l
l e n a p t n o r f e h t g n i n e p O l l
r o s n e s e r u t a r e p m e t m o o P , n o t t u b r e w o P l l
t i n u r o o d t u o e h t g n i k c e h C l l
2 l l o r t n o c e t o m e r e h t g n i k c e h C
y a l p s i d l o r t n o c e t o m e P 3 l
l o r t n o c e t o m e r e h t g n i s U 3 l
s e i r e t t a b e h t g n i t r e s n | 3 l
OPLPAT|NG 8AS|C PUNCT|ON
l4
f f o d n a n o r e n o i t i d n o c r i a e h t g n i n r u T
e d o m n o i t a r e p o g n i t c e l e S
o t u A
4 l
4 l
l o o C
4 l
y r D
5 l
n a P
6 l
7 l
n o i t c e r i d w o l f r i a e h t g n i t s u ì d A 8 l
w o l f r i a l a c i t r e v 8 l
w o l f r i a l a t n o z i r o H 8 l
contents
L
N
G
L
|
S
H
|
L
G
N
Temperature changes in mode
CONTENTS _09
l0_ VIEWING
viewing your air conditioner
Congratulations on the purchase of the air conditioner. we hope you enìoy the features of your air
conditioner and stay cool or warm with optimal efficiency.
Please read the user manual to get started and to make the best use of the air conditioner.
CHLCK|NG THL |NDOOP UN|T AND D|SPLA¥
Carefully unpack your air conditioner, and check the unit to make sure it is not damaged.
Main parts
¥our air conditioner may slightly look different from illustration shown above depending on
your model.
Air intake Air filter(under the panel)
Air flow blade
(up and down)
VIEWING _ll
OPLN|NG THL PPONT PANLL
Tightly grab front side of the front panel and lift up the panel to open. Then slightly push the panel up until
the panel is hanged over the hooks of the unit.
Power button and Poom temperature sensor
¥ou may locate the Power button on the right bottom side of the air conditioner. |f the front
panel is open, you can check the room temperature sensor.
¥ou can turn on the air conditioner without the remote control by pressing the Power button.
The room temperature sensor measures indoor room temperature.
CHLCK|NG THL OUTDOOP UN|T
ASvl0/l3L` Series
ASvl8/24` Series
Poom temperature
sensor
Power button
Air |nlet (Pear)
Connection valve
Air Outlet
L
N
G
L
|
S
H
|
L
G
N
Make sure room temperature sensor does not get damaged.
CAUT|ON
Air |nlet (Pear)
Connection valve
Air Outlet
l2_ VIEWING
viewing your air conditioner
CHLCK|NG THL PLMOTL CONTPOL
¥ou can activate the air conditioner by pointing the remote control away from it. when using the remote
control, always point it directly at the air conditioner.
Lach time you press the button, a short beep will sound and a transmit indicator appears
on the remote control display.
Pemote Control display
Power
Tur the air conditioner
Mode
Set one of the 5 operating modes.
(See pages l4~l7 for instructions.)
Pan speed Y Z
through the air conditioner with
erent fan speeds such as
Auto/Silence/Low/Medium/High.
Smart Saver
Less energy usage makes your space
cool between the temperature range of
24ºC~30ºC.
On Timer
Set the On Timer on.
Timer
Timer on.
.
Air swing
automatically up and down.
Turbo
Operate in maximum fan speed to
cool/quicly.
Temp UV
|ncrease/Decrease the temperature by l`C.
Set/Cancel
Set/Cancel the timer/ function.
Set the mode on.
Lvap.CLLAN
Lvaporator clean function - Dry inside of the
indoor unit to get rid of odor.
Time
Adìust the time for timer/ function.
5
_l3 VIEWING
l. Push the lever as arrow
indicates on the rear side
of the remote control and
pull up.
2. |nsert two AAA batteries.
Check and match the "+ª and
"-ª signs accordingly. Make
sure you have inserted the
batteries in correct position.
3. Close the cover by place it
back to its original position.
¥ou should hear click sound
when the cover is locked
properly.
Pemote control display
Using the remote control
· Point the remote control towards the remote control sensor of the unit.
· when properly pressing the button on the remote control, you will hear beep sound
from the unit.
· The signal may not be received well of electr escent lamps,
escent lamps are in the same space.
· |f other electrical products operate by the remote control, call your nearest contact center.
|nserting the batteries
L
N
G
L
|
S
H
|
L
G
N
Silence indicator
Auto (Turbo)
Silence
Low
Medium
High
OPERATING l4_
operating basic function
TUPN|NG THL A|P COND|T|ONLP ON AND OPP
Press the Power button on the remote control.
¥ou will hear a ringing sound and the air flow blade will move up and
down automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
when you turn off the air conditioner, air flow blade will stop moving
and remain closed.
Turning on/off your air conditioner without the remote control.
¥ou can operate your air conditioner by pressing the Power button on the right bottom side of the
air conditioner.
SLLLCT|NG OPLPAT|ON MODL
Auto
|n Auto mode, the air conditioner will automatically set the temperatur e and fan speed depending
on the room temperature detected by the room temperature sensor.
l. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until
Auto mode and Auto fan speed indicator appear on the
remote control display.
The air conditioner will automatically set the operation
mode to Cool or Heat depends on the roomtemperature.
when you press the Mode button, mode will change
in order of Auto, Cool, Dry, and Pan.
3. Set the Temperature.
Press the Temp Uor Vbutton on the remote control
to increase or decrease the desired temperature.
¥ou can set the desired temperature between the
range of l6`C~30`C.
¥ou can increase/decrease the temperature by l `C.
· when you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
· Air flow can be adìusted manually. (See page l8 for instructions.)
· Press the Temp button on the remote control to check the temperature in a room
Cool
|n Cool mode, the air conditioner will cool your room. ¥ou can adìust the temperature and the fan
speed to feel cooler in hot season.
l. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until
Cool mode indicator appears on the remote control
display.
The air conditioner operates in Cool mode and it will
lower the temperature in your room.
when you press the Mode button, mode will change
in order of Auto, Cool, Dry, and Pan.
3. Set the temperature.
Press the Temp Uor Vbutton on the remote control
to increase or decrease the desired temperature.
¥ou can set the desired temperature between
the range of l6`C~30`C.
¥ou can increase/decrease the temperature by l `C.
4. Set the fan speed.
Press the Pan Y or Z button on the remote control to
set the desired fan speed.
|f room temperature reaches desired value, the air
conditioner will shut off cooling for a while and ìust the
fan runs.
when you press the Pan Y or Zbutton, fan speed
will change in order of Auto, Low, Medium and High.
· when you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
· Air flow can be adìusted manually. (See page l8 for instructions.)
· |f current outside temperatures are much higher than the selected indoor temperature,
it may take time to bring the inner temperature to the desired coolness.
·
·
Press the Temp button on the remote control to check the temperature and in a room.
OPERATING?
L
N
G
L
|
S
H
|
L
G
N
Silence model ( ) makes the noise quieter during operating the indoor unit in the
Cool mode.
operating basic function
SLLLCT|NG OPLPAT|ON MODL
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air.
Dry mode makes the air feel refreshing in a humid climate.
l. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until
Dry mode and Auto fan speed indicator appear on the
remote control display.
|n Dry mode temperature will be set automatically and
will appear on the remote control display.
e h t s s e r p u o y n e h w Mode button, mode will change
in order of Auto, Cool, Dry, and Pan.
· when you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
· Temperature/Pan speed cannot be adìusted while using this mode.
· Air flow can be adìusted manually. (See page l8 for instructions.)
· Press the Temp button on the remote control to check the temperature and in a room.
OPERATING l6_
_l7 OPERATING
Pan
Pan mode can be selected to ventilate your room. Pan mode will be helpful to refresh the stale air
in your room.
l. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until
Pan mode indicator appears on the remote control
display.
The air conditioner operates in Pan mode and
automatically adìusts the temperature according to the
current room temperature.
when you press the Mode button, mode will change
in order of Auto, Cool, Dry, and Pan.
3. Set the fan speed.
Press the Pan Y or Zbutton on the remote control to
set the desired fan speed.
when you press the Pan Y or Zbutton, fan speed
will change in order of Low, Medium and High.
· when you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
· Air flow can be adìusted manually. (See page l8 for instructions.)
· Press the Temp button on the remote control to check the temperature and in a room.
L
N
G
L
|
S
H
|
L
G
N
OPERATING l8_
AD1UST|NG THL A|P PLOw D|PLCT|ON
Air flow can be directed to your desired position.
vertical air flow
Air flow blades move up and down.
l. Press the Air swing button on the remote control.
Air swing indicator will be on and air flow blades move up and down continuously to circulate
the air.
Horizontal air flow
Make sure one of the blade pins that stick out of the air flow blades are not broken.
l. Move the blade pin lever left or right to keep the air flow direction in a constant position you
prefer.
8e extremely careful with your fingers while adìusting the Horizontal air flow direction.
There is a potential risk of personal inìury when the unit is mishandled.
CAUT|ON
Press the Air swing button on the remote control again, to keep the air flow direction in a
constant position.
_l9 USING ADVANCED FUNCTIONS
using advanced functions
US|NG THL TUP8O PUNCT|ON
Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum
fan speed for 30 minutes.
l. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Turbo button on the remote control until
Turbo indicator appears on the remote control display.
The air conditioner operates in Auto fan speed and
automatically adìusts the temperature according to the
current room temperature. The unit operates for
30 minutes and then operates in last used mode, or in
Auto mode if Dry/Pan mode is most recent mode used.
Turbo function is only available in Auto/Cool mode. |f Turbo function is selected in
Dry/Pan mode, operating mode changes to Auto.
To deactivate Turbo function
l. Press the Turbo button on the remote control again.
The air conditioner operates in last used mode, or in Auto mode if Dry/Pan mode is most
recent mode used.
· when you are using the remote control, make sure corresponding indicator appears on
the remote control display.
· Temperature/Pan speed cannot be adìusted while using this function.
· Air flow can be adìusted manually. (See page l8 for instructions.)
· when the Turbo function is activated, pressing Mode button will automatically cancel the
function.
L
N
G
L
|
S
H
|
L
G
N
USING ADVANCED FUNCTIONS
20_
SLTT|NG T|MLP
This advanced Timer function allows you to tur your air conditioner automatically even when you are
away. Simply set the time and your air conditioner will tur automatically.
On timer
This function allows you to turn on the air conditioner
automatically within the time range of 24 hours.
.
l. Press the On Timer button on the remote control.
On timer indicator blinks on the remote control display.
2. Set the time you want the air conditioner to turn on
automatically.
Press the Time or button on the remote control
to change the time setting while On timer indicator is
blinking.
¥ou can set the time up to 24 hours, increasing in
3. Press the Set/Cancel button on the remote control to
active it on.
The remote control display will show the hour(s) you have set for 3 seconds and
set desired temperature will display.
The air conditioner will operate automatically at set time and then Ontimer indicator
stops blinking and stays on. |f On timer is not set within l0 seconds, the air conditioner
will end setting.
4. Set the operating mode.
Press the Mode button on the remote control until the
desired mode appears on the remote control display.
The air conditioner will operate in the mode you set.
On timer function is available in Auto/Cool/Dry/Pan/
mode.
· Temperature can also be adìusted. (See step 3 on page l4 for instructions.)
· , approximately after l0 seconds, all the other
indicators will be gone except the On timer indicator.
· Time setting can be changed by pressing the On Timer button.
Press the Time or button to change time setting and then press the Set/Cancel
button to active it on.
4O DEACTIVATE THE /N TIMER
l. Press the Set/Cancel button on the remote control.
On timer you set will be canceled and On timer indicator will disappear.
_2l USING ADVANCED FUNCTIONS
using advanced functions
SLTT|NG T|MLP
timer
This function allows you to tur the air conditioner automatically within the time range of
.
l. Press the Timer button on the remote control.
timer indicator blinks on the remote control display.
2. Set the time you want the air conditioner to tur
automatically.
Press the Time or button on the remote control
timer indicator is
blinking.
¥ou can set the time up to 24 hours, increasing in
3. Press the Set/Cancel button on the remote control to
active it on.
The remote control display will show the hour(s) you have set for 3 seconds and
set desired temperature will display.
The air conditioner will operate automatically at set time and then Off timer indicator
timer is not set within l0 seconds, the air conditioner
will end setting.
· Time setting can be changed by pressing the Timer button.
Press the Time or button to change the time setting and then press the
Set/Cancel button to active it on.
· ¥ timer function with On timer function to tur the air
conditioner at the desired time.(See page 22 for instructions.)
4 TIMER
l. Press the Set/Cancel button on the remote control.
timer indicator will disappear.
L
N
G
L
|
S
H
|
L
G
N
USING ADVANCED FUNCTIONS 22_
timer
¥ timer together for more convenient use of the timer
function.
l. Set the On timer.
Press the On Timer button.
Set the time with Time or button.
Press Set/Cancel button to activate the On timer.
See page 20 for more detail instructions on setting
On timer.
2. timer.
Press the Timer button.
Set the time with Time or button.
Press Set/Cancel timer.
when you set the time, there can be two possible options:
The air conditioner will tur
automatically. Set up should be done while the air
.
Por example, |f the On timer is set at 3 hours and
timer at 5 hours, the air conditioner will turn
automatically 3 hours after the set time and
then operate for next 2 hours before tur
automatically.
The air conditioner will tur and then on
automatically. Set up should be done while the air
conditioner is operating.
Por example, |f the On timer is set at 3 hours and
timer at l hour, the air conditioner will tur
automatically an hour after the set time and r
for 2 hours before turning on automatically.
See page 2l for more detail instructions on setting
timer.
4O DEACTIVATE THE TIMER COMBINATION
l. Press the Set/Cancel button on the remote control.
. r a e p p a s i d l l i w s r o t a c i d n i e h t d n a d e l e c n a c e b l l i w r e m i t f f O d n a n O e h t f o h t o 8
Preset time of On Timer is shorter than Off Timer
Preset time of On Timer is longer than Off Timer
_23 USING ADVANCED FUNCTIONS
3. Set the length of time you want the air conditioner to
stay on.
Default time is set to 8 hours.
Press Time or button on the remote control to
timer indicator is
blinking.
¥ou can set the time up to l2 hours, increasing in
4. Press the Set/Cancel button on the remote control to active it on.
The remote control display will show the hour(s) you have set for 3 seconds and
set desired temperature will display.
when the set time has elapsed, the air conditioner will automatically tur and
then indicator disappears.
|f mode is not set within l0 seconds, the air conditioner will end setting.
· Temperature can be adìusted and the air conditioner automatically adìusts the
Pan speed/Air swing after setting in Cool mode.
· when the function is activated, pressingMode button will automatically
cancel the function.
using advanced functions
SLTT|NG T|MLP
MODE
mode allows you to set a comfortable sleep temperature while saving energy and
having sound sleep. mode can be set up when the air conditioner is on.
l. Set the operating mode.
Press the Mode button on the remote control until
Cool/Heat appears on the remote control display.
is only available in Cool mode.
2. Press the button on the remote control.
indicator appears and Off timer indicator
starts blinking on the remote control display.
L
N
G
L
|
S
H
|
L
G
N
USING ADVANCED FUNCTIONS 24_
Temperature changes in mode
To prevent excessive cooling during sleep, the
the temperature setting in accordance with the time setting. Temperature and air current change
according to the three stages: Pall asleep, Sound sleep, and wake up from mode,
and then the air conditioner will automatically tur when the set time has elapsed.
Three stage prevents you fr culty sleeping in summer night.
Pall asleep . e r u t a r e p m e t e h t g n i p p o r d y b p e e l s o t n i u o y s e s a L :
Sound sleep . y l t h g i l s e r u t a r e p m e t r u o y s e s i a r d n a y d o b r u o y s e x a l e P :
wake up from
mode :
Allows you to wake up from comfortable intermittent air and it makes you feel refresh.
n i r e m i t f f O t e S · mode over 5 hours. ¥ou feel disturbed sleep if the
is set too short or long because the default is set to 8-hour-operation.
· |f the mode is set less than 4 hours, the operation will stop at the set time.
|f the mode is set over 5 hours, it will run as wake up stage for the last one
hour before stop.
· Pecommended set temperature is between 25`C~27`C for cooling
4O DEACTIVATE MODE
l. Press the Set/Cancel button on the remote control.
mode you set will be canceled and indicator will disappear.
_25 USING ADVANCED FUNCTIONS
using advanced functions
US|NG THL SMAPT SAvLP PUNCT|ON
This function will set the temperature range limit to help you save energy while the air conditioner is operating
in Cool mode.
l. Press the Smart Saver button on the remote control
while the air conditioner is operating in Cool mode.
Smart Saver indicator and air swing indicator appears
automatically on the remote control display.
|f the current set temperature is lower than 24ºC, it will
automatically raise to 24ºC.
· Smart Saving function is only available in Cool mode.
· when Smart Saving function is activated, temperature range will be limited to 24ºC~30ºC.
· |f the desired temperature is lower than 24ºC, tur the Smart Saving function by
pressing the Smart Saver button again.
· Temperature/Pan speed can also be adìusted. (See step 3~4 on page l5 for instructions.)
· . (See page l8 for instructions.)
· when the Smart Saver function is activated, pressing Mode button will automatically
cancel the function.
To deactivate the Smart Saver function
l. Press theSmart Saver button on the remote control while Smart Saver function is on.
Smart Saving function you set will be canceled and Smart Saving indicator will disappear on
the remote control display.
US|NG THL PUNCT|ON
, Micro Plasma |on, generates hydrogen(H) and oxygen(O
2
) to remove a polluted substance and
decomposition of such harmful particles. |t makes you breathe better as if you were staying around
waterfalls, ocean surf, rivers and mountains.
l. Press the button on the remote control.
indicator will appears on the remote control display
and the air conditioner generates MP|.
e h T · function can be selected whether the air
.
e h T · function will be on automatically when you
turn on the air conditioner.
To deactivate function
l. Press the button on the remote control while function is on.
mode you set will be canceled and blue light will tur .
L
N
G
L
|
S
H
|
L
G
N
USING ADVANCED FUNCTIONS
26_
US|NG THL LvAPOPATOP CLLAN PUNCT|ON
Lvaporator clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit.
¥our indoor unit evaporates the moisture inside of the unit. Activate this function to provide you with more
clean and healthier air.
l. Press the Lvap. CLLAN button.
f 7HEN THE AIR CONDITIONER IS TURNED
The Lvaporator clean indicator on the indoor unit display appears and the Lvaporator
cleaning function runs.
f 7HEN THE AIR CONDITIONER IS TURNED ON
The Lvaporator clean indicator on the indoor unit display appears and the Lvaporator
cleaning function runs after stopping the air conditioner operation.
Lvaporator Cleaning time can vary, depending on the previously used mode.
Auto, Cool, Dry mode : approximately 30 minutes.
Pan mode : approximately l5 minutes.
The Lvaporator clean indicator appears only on the indoor unit display as (Clean).
when the air conditioner is turned on, the Lvaporator clean function runs after stopping the
air conditioner operation.
Make sure the power is turned off and unplugged from the wall socket when cleaning the air conditioner.
|f system contains 3 kg or more of fluorinated greenhouse gases. |n this case, it has to be checked for
leakage at least once every l2 months, according to regulation nº842/2006. This activity has to be covered
by qualified personnel only.
|n the case above, a maintenance book has to be available for each unit installed.
CLLAN|NG THL LXTLP|OP
l. wipe the surface of the unit with a slightly wet or dry cloth when needed.
Do not use 8enzene, Thinner or Clorox
TM
.
They may damage the surface of the air conditioner and can create a risk of fire.
CAUT|ON
CAUT|ON
CLEANING AND MAINTAINING
28_
8io filter
washable foam based 8io filter leads to reduction in allergens that thrive in polluted air.
The filter is cleaned with a vacuum or by hand washing.
l. Open the front panel.
Tightly grab front side of the front panel and lift up the panel to open.
Then slightly push the panel up until the panel is hanged over the hooks of the unit.
2. Pemove the Air filter.
Grab the handle and lift it up. Then, pull the Air filter towards you and slide it down.
3. Slide the 8io filter(color in sky-blue) out to remove it from the slot.
. r e t l i f r i a e h t h t a e n e b s t o l s 4 y n a n i d e c a l p e b n a c r e t l i f o i 8
4. Clean the 8io filter with a vacuum cleaner or soft brush. Then rinse it with running water and
dry it in a ventilated area.
5. |nstall the 8io filter back in position.
6. Close the front panel.
Clean the 8io filter every 3 months. The cleaning term may differ on usage and
environmental conditions.
_29 CLEANING AND MAINTAINING
cleaning and maintaining the
air conditioner
PLPLAC|NG THL P|LTLP
chased from the retail store or ordered from the dealer where you purchased
.
ciently cigarette smoke, pet odors and other unpleasant smells.
l. Open the front panel.
Tightly grab front side of the front panel and lift up the panel to open.
Then slightly push the panel up until the panel is hanged over the hooks of the unit.
2. .
ds you and slide it down.
3. emove it from the slot.
. r e t l i f r i a e h t h t a e n e b s t o l s 4 y n a n i d e c a l p e b n a c r e t l i f g n i z i r o d o e D
4.
5. Close the front panel.
·
· ect its
L
N
G
L
|
S
H
|
L
G
N
Durability of the Deodorizing filter can be different depending on usage and environmental
conditions. However, it is recommended to change the Deodorizing filter once a year.
CLEANING AND MAINTAINING 30_
MA|NTA|N|NG ¥OUP A|P COND|T|ONLP
|f the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in
best condition.
l. Dry the air conditioner thoroughly by operating in Pan mode for 3 to 4 hours and disconnect
the power plug. There may be internal damage if moisture is left in components.
2. 8efore using the air conditioner again, dry the inner components of the air conditioner again
by running in Pan mode for 3 to 4 hours. This helps remove odors which may have generated
from dampness.
Periodical checks
Pefer to the following chart to maintain the air conditioner properly.
Type Description
Lvery 2
weeks
Lvery 3
months
Lvery 4
months
Once a
year
|ndoor unit
Clean the air filter (l)
L
Clean the bio filter (l) L
Peplace the deodorizing filter(l) L
Clean the condensate drain pan (2) L
Thoroughly clean the heat exchanger (2) L
Clean the condensate drain pipe (2) L
Peplace the remote control batteries (l) L
Outdoor unit
Clean the heat exchanger on the outside
of the unit (2)
L
Clean the heat exchanger on the inside
of the unit (2)
L
Clean the electric components with ìets
of air (2)
L
verify that all the electric components are
firmly tightened (2)
L
Clean the fan (2) L
verify that all the fan assembly is firmly
tightened (2)
L
Clean the condensate drain pan (2) L
L : This check mark requires checking the indoor/outdoor unit periodically, following to the
description to maintain the air conditioner properly.
The checks and maintenance operations described are essential to guarantee the
efficiency of the air conditioner. The frequency of these operations varies according to the
characteristics of the area, the amount of dust, etc.
(l) The described operations should be performed more frequently if the area of installation
is very dusty.
(2) These operations must always be performed by qualified personnel. Por more detailed
information, see the |nstallation Manual.
_3l
CLEANING AND MAINTAINING
cleaning and maintaining the
air conditioner
MA|NTA|N|NG ¥OUP A|P COND|T|ONLP
H
S
|
L
G
N
L
|
L
G
N
|nternal protections via the unit control system
This internal protection operates if an internal fault occurs in the air conditioner.
Type Description
Anti-protection of
internal battery
The compressor will be off to protect internal battery when the air
conditioner operates in Cool mode.
Protect compressor
The air conditioner does not start operating immediately to protect the
compressor of the outdoor unit after it has been started.
APPENDIX 32_
appendix
TPOU8LLSHOOT|NG
Pefer to the following chart if the air conditioner operates abnormal ly. This may save time and unnecessary
expenses.
PPO8LLM SOLUT|ON
The air conditioner does
not operate immediately
after it has been
restarted.
· 8ecause of the protective mechanism, the appliance does not start
operating immediately to keep the unit from overloading.
The air conditioner will start in 3 minutes.
The air conditioner does
not work at all.
· Check that the power plug is properly connected. |nsert the power plug
into the wall socket correctly.
· Check if the circuit breaker is switched off.
· Check if there is a power failure.
· Check your fuse. Make sure it is not blown out.
The temperature does
not change.
· Check if you selected Pan mode.
Press the Mode button on the remote control to select another mode.
The cool air does
not come out of the air
conditioner.
· Check if the set temperature is higher(lower) than the current temperature.
Press the Temp Uor Vbutton on the remote control to change the set
temperature. Press the Temp Uor Vbutton to increase or decrease the
temperature.
· Check if the air filter is blocked by dirt. Clean the Air filter every two weeks.
· Check if the air conditioner has ìust been turned on. |f so, wait 3 minutes.
The fan speed does not
change.
· Check if you selected Auto or Dry mode.
The air conditioner automatically adìusts the fan speed to Auto in Auto/Dry
mode.
Timer function does not
set.
· Check if you press the Set/Cancel button on the remote control after you
have set the time.
Odors permeate in the
room during operation.
· Check if the appliance is running in a smoky area or if there is a smell
entering from outside. Operate the air conditioner in Pan mode or open
the windows to air out the room.
The air conditioner
makes a bubbling sound.
· A bubbling sound may be heard when the refrigerant is circulating through
the compressor. Let the air conditioner operate in a selected mode.
water is dripping from
the air flow blades.
· Check if the air conditioner has been cooling for an extended periodof
time with the air flow blades pointed downwards. Condensation may
generate due to the difference in temperature.
Pemote control is not
working.
· Check if your batteries are depleted.
· Make sure batteries are correctly installed.
· Make sure nothing is blocking your remote control sensor.
· Check that there are strong lighting apparatus near the air conditioner.
Strong light which comes from fluorescent bulbs or neon signs may
interrupt the electric waves.
S¥MPTOMS CHLCK LPPOP MODL (D|SPLA¥LD) MANAGLMLNT
The abnormal signal is
displayed
Some signal is displayed on the window
LLD like , , , ,
, , , All blink, , , ,
, , , , , , ,
, , , , , ,
This product has something
wrong, please call the nearest
contact center.
_33 APPENDIX
appendix
OPLPAT|ON PANGLS
The table below indicates the temperature and humidity ranges the air conditioner can be operated within.
Pefer to the table for efficient use.
MODL
OPLPAT|ONAL TLMPLPATUPL
|NDOOP HUM|D|T¥ |P OUT OP COND|T|ONS
|NDOOP OUTDOOP
COOL|NG l6`C to 32`C l6`C to 46`C 80% or less
Condensation may occur on
the indoor unit with risk to have
either water blow off or drops on
the floor.
DP¥|NG
l6`C to 32`C l6`C to 46`C
-
Condensation may occur on
the indoor unit with risk to have
either water blow off or drops on
the floor.
|f the cooling operation is used at over 32`C(indoor temperature), it does not cool at its full capacity.
L
N
G
L
|
S
H
|
L
G
N
Country
Customer Care Center
Web Site
ÌNDÌA 3030 8282, 1800110011, 1800 3000 8282 www.samsung.com/in
ÌNDONESÌA 0800-112-8888 www.samsung.com/id
y m / m o c . g n u s m a s . w w w 9 9 9 9 - 8 8 - 0 0 8 1 A Ì S Y A L A M
PHÌLÌPPÌNES 1-800-8-SAMSUNG(726-7864), 02-5805777 www.samsung.com/ph
SÌNGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg
THAÌLAND 1800-29-3232, 02-689-3232 www.samsung.com/th
w t / m o c . g n u s m a s . w w w 9 9 9 - 9 2 3 - 0 0 8 0 N A W Ì A T
n v / m o c . g n u s m a s . w w w 9 8 8 8 8 5 0 0 8 1 M A N T E Ì V
www.samsung.com/ar
Contact SAMSUNG WORLD WIDE
Ìf you have any comments or questions regarding a Samsung products, contact the SAMSUNG
customer care center.
AGENTÌNE 0800-333-3733
Samsung Electronics Co.,Ltd. All Rights Reserved. C

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close