SB 240

 

VERTICAL PACKAGING MACHINE TYPE SB-240   Automatic form, ll and seal machine for tubular sachets, in conjunction with the corresponding dosing sytems, this packaging machine is designed according to the building block system and suited for the packaging of: 1.

2.

3.

4.

Powdered products (even with heavy dust products development): sucha as milk, baby food, ground coffee, ground spices, chocolate powder, dehydrated soups, our, plaster, insecticides and herbicides. Granular products: such as rice, peas, beans, raisins, peanuts, hazelnuts, short cut pastry, crystal sugar, salt and semolina. Small piece goods such as nuts, animal food, cornakes, sweets, biscuits, deep frozen vegetables. Liquids and semi liquid products (up to a limited extent) such as milk, soap paste and oil.

The machine can be equipped with the necessary accessories to produce all types of tubular, gusseted and at bottom sachets. All current types of heatsealable and thermoplastec wrapping materials can be handled.

Operating Principle From the wrappin material reel the machine forms, the sachet, lls it by means of the corresponding dosing unit, closes it and cuts it off. A photocell unit centers the print.

Feeding and Dosing Systems Different types of feeding and dosing sytems are available. Please enquire about auger dosing units, volumetric cup feeders, weighers, pumps and bucket elevators.

MACHINE DESIGN & ELECTRO - MECHANICAL ENGINEERING Jl. Kemayoran Baru No. 31-33 Surabaya 60175, Indonesia phone +6231 3538438 - 3536853 - 3521811 fax +6231 3532797 email packaging@nast [email protected] ecgmi.com | www.nastecgmi.com

 

Technical Features Indenitely variable electromechanical drive as slide in unit, silent running, economical in use of energy and easy to mantain. Further advantages are: 1. Wrapping material for reels up to 500 mm in diameter. Mounting rails for printing unit are standard equipment. 2. Uniform low overall height of forming shoulders for all types of wrapping materials (if necessary on air cushion basis, protected design, DGBm Nr. 76 08 036). 3. Compact and completely adjusted quick change forming parts. 4. Sealing station with safety device for the protection of hands and tools (protected design, DGBm Nr. 78 24 313.7). 5. Quick change inserts for impulse welding jaws. 6. Separate or direct drive for dosing units. 7. Machine provided for problem free (even subsequent) tting of dosing units and auxiliary equipment. 8. Machine suited for linking to other machines (e.g. cartoning machines).

Technical Data

Sachet Sizes : min. : min. width 50mm - min. length 60m, max. width 240mm - max length 300mm. In case of at bottom sachets the forming parts are of rectangular shape. Filling volume : approx. : approx. 2,5 litres Sealing and welding system :  :  1. Heatsealing  2. Pulsed resistance welding All current materials can be handled  handled  Output : up : up to 105 sachets/min. Power connection : 3 : 3 x 380 V (or upon request), 3 to 4,5 kW Compressed air connection : 6 : 6 bar Cooling water requirements: For pulsed resistant welding only, approx. 2 Litres/min. Weight : 800 : 800 - 1000 gs, depending on auxiliary equipment. Dimension: see layout drawing 

Accessories for the Basic Machine Code dating devices, printing unit, perforating device, vibrating shaft, gas ushing, gussetting device, attachment for producing at bottom sachets and other auxiliary equipment.

Dimensions (in mm, not binding)