Software Network Engineer
Content
MITHUN BANERJEE Apt 2,455 South 8th Street, San Jose, CA 95112 Cell: (408) 674-6180 E-mail: [email protected]/ [email protected] Linked-in: http://www.linkedin.com/pub/mithun-banerjee/16/115/a38
OBJECTIVE Seeking Internship/Full-time position as a Software Network Engineer EDUCATION San Jose State University, San Jose, CA M.S. Electrical Engineering, May, 2011 Concentration in Networking/Network Application Programming GPA: -3.6/4.0 B.S. Electronics & Communication Engineering India, Aug-September 2001, CGPA: -70
SKILL-SETS Programming Languages: C, C++ Scripting Language: TCL/TK, Python, Shell scripting Networking Protocols: DSL, SDH/SONET, Ethernet, ATM, TCP, UDP, BGP, RIP, OSPF, M PLS, PPP, VLAN, RTP, RTSP, SCTP, VOIP, SIP, H.323, PIM-SM/DM, CBT, MOSPF, SS7, Q oS Web Technologies: HTML, XML, JavaScript, AJAX and PHP Equipments Handled: IXIA, SMB- 2000, AX4000, SDH Analyzer- ANT20SE, Network Ana lyzer 8720-C, Communication Signal Analyzer, ADSL/VDSL Noise generator (NSA 400) , ADSL/VDSL Wireline Simulator (DLS8100/6800/90) Platform worked: Solaris/Linux/Windows/VxWorks Strong communication and writing skills in English. ACADEMIC Following are the academic projects completed during MS Course work:PROJECTS * Currently doing my Master's Project/Thesis on "Performance Analysis o f Multicast Traffic over a MPLS network". The whole project is being implemented and simulated on Net work-Simulation-2 model using C++ and OTcl languages on Linux platform. * The project proposes and implements a new multicasting algorithm in order to c onstruct a shared and source-specific multicast LSP trees over a MPLS Network. * The project further implements dense/sparse mode version of Multicast Routing Protocols (CBT/PIM-DM) using the proposed algorithm over a MPLS network. * Performance analysis pertaining to various multicast transmission parameters b etween CBT/PIM-DM is then compared on different multicast traffic models. * Completed a course term project in "H.264 video streaming using RTP protocol". Following were the features associated with the project. * Implemented an interactive client and server distributed application to facili tate H.264 video streaming over internet using RTP protocol over UDP sockets. * Enhanced the server capability by designing a multithreaded concurrent UDP ser ver, in order to support concurrent access from multiple clients. * Evaluated packet loss, delay analysis and its impact on video quality on H.264 video encoding technique. * Implemented the whole project using socket programming and posix based pthread concepts for concurrency design using C language on Linux platform (Ubuntu). * Completed successfully the following simulation term projects in other network
ing courses:* Evaluated various "SIP features and extensions for Voice over IP (VOIP) applic ations". A prototype SIP based client and proxy server components were configure d. Network traces of SIP packets pertaining to various features and extensions w ere analyzed in detail over a live LAN network. * Implemented various "packets queuing mechanism associated with QoS" in a typic al network. The project focused on realizing various series/parallel queuing M/M /1 modules and further analyzing average packet delay on each model using discre te event simulator OMNET++ tool. * Created a "Web based Cross/Inter-domain Chat protocol" design project. AJAX wa s used to design the front end client interface and PHP was used to design backe nd server using MySql Database interface.
WORK * Ikanos Communication Inc, Red Bank, New Jersey, USA EXPERIENCE Product Application Engineer Intern [Broadband Application Group] 5/2010 - 8/2010 Alcatel DSLAM Project * Contributed towards resolving various field issues pertaining to API Interface Layer reported during the integration testing phase covering layer 1 and 2 feat ures. * Contributed in setting up an ATM Bonding traffic test bed setup for system tes t team using implicit tagging VLAN rules. * Conexant System Inc, Noida, India Lead Engineer [Broadband Access Group] 1/2008- 7/2009 VDSL 2/2+ Accelity2/2+ Chipset Development Project
*Lead a team of three in designing API Interface layer software for VDSL2/2+ wit h reference to ITU-T standards G993.1/2 for Conexant Owned VDSL PHY CO chipsets for Alcatel's Line Termination Card covering 4/5 bands VDSL2/2+ spectrum and lin e bonding features. *Participated in board bring up activity of the Alcatel's Line termination card (Central Office Side) integrated on Conexant VDSL PHY Chipset. This whole projec t was a part of AT&T U-Verse Project in North America. *Implemented all the features associated with this project using C language on U nix/VxWorks platform. 6/2007 - 12/2007 ADSL 2 /ADSL 2+ MAXTANE/OCTANE Chipset Development Project * Contributed in remodeling automated test tools based on TR-067, WT-100 Inter O perability Test bench apropos to the validation of Conexant owned CPE/CO PHY Chi psets for ADSL/ADSL2+ standards. This project was a group project consisting of three members.
*Analyzed various noises impairment models (ADSL2/ADSL2+ specific) that affe ct the performance of physical DSL layer. Later incorporated these noise models in the test tools developed for validating chipsets based on ADSL/ADSL2+ standar ds for the production test cycle. *Developed the above test tools using C/TCL language on Windows platform. \
* Alcatel-Lucent Networks, Ottawa, Canada Software Engineer [Onsite Position from Wipro technologies] 2/2006 - 4/2007 Hybrid Network Termination Card (HYNT) Development Project * Developed prototype system and application software for a new Hybrid Network T ermination Card during my on-site assignment at Alcatel-Lucent Canada comprising of a team of three engineers: * Contributed in the board bring up activity by modifying the existing software modules to suit the intended requirement of the hardware system during various i nitializations phases. * Integrated new equipment domain functionality in the existing management softw are for the above system. * Solved various fault reports covering Layer-2/3 features, reported during fiel d integration and product testing of the above Hybrid Network Termination (HYNT) card. * Implemented the features using C/C++ language and on Solaris/Vxworks platform. * Won 'Excellence award' in recognitions for timely completion, solving various fault reports and handling intricate maneuvers pertaining to the lifecycle of th is project. * Wipro Technologies, Bangalore, India Project Engineer [Telecom and Software Systems, Alcatel-Lucent Internetwo rking Division] Involved in the design and development of Layer2/3 network software stacks and a ssociated features for Intelligent Service Access Multiplexer (ISAM) an IP DSLAM project of Alcatel-Lucent Networks throughout my tenure at Wipro Technologies. 10/2005 - 2/2006 IGMP based Feature Enhancement * Designed features for dynamic retrieval of real time channel state for differe nt multicast groups via SNMP or via CLI. This development was a new addition in the existing IGMP application for ISAM. This project was a group project consist ing of five members. * Coded the features using C/C++ language on Solaris/Vxworks platform. 4/2005 - 2/2006 Impulse Noise Protection Mechanisms * Lead a team of two engineers in designing new Proxy code and automation of tes t scripts to support testing of Impulse Noise Protection mechanism with referenc e to ITU-T G.992.3 standard for ADSL2 based line termination card with Broadcom PHY Chipsets. Solved various fault reports generated during testing and field in tegration. * Implemented the features using C language on Solaris/Vxworks platform. * Won 'Feather in my Cap' in recognitions of my work and for timely completion,
solving various fault reported during field testing and effectively mentoring th e team pertaining to this project. 10/2004 - 4/2005 Virtual Routing and Forwarding Feature *Developed various SNMP based interfaces for Virtual routing and Forwarding and VLAN features for the main network termination card. This project was a group pr oject consisting of four engineers and was awarded 'Thanks a Zillion' honor.' *Implemented the features using XML/C language on Solaris/Vxworks platform.
* VXL Technologies, Faridabad, India Telecom Engineer [Information & Communication Division] 5/2004 - 10/2004 Ethernet Router Development Project * Generated test plan for the L2-L3 protocols like PPPoA, PPPoE, IPoA & EoA Rout ing functionality like RIP, NAT and DNS; as well as DHCP applications for ADSL E thernet Router and USB Modem based on ITU-T standards G.992.1 (G.DMT) and G.992. 2 (G.Lite). This project was a group project consisting of five engineers. * Implemented the test cases using TCL scripting language and on Windows platfor m. 6/2002 - 5/2004 Synchronous Transfer Mode (STM-1, Optical Interface) Developm ent Project *Developed various features, test plans and test cases as per guideline of ITU-T Recommendations G.957, G.958, G.703, G.784 and TEC GR and carried out test exec ution successfully for indigenous SDH transmission equipment in a group three me mbers. * Generated the test cases using TCL scripting language and on UNIX platform. *Played a key role in conducting Telecommunication Engineering Center (Governme nt of India) approval and Product Quality Test Certificate of STM-1 transmission equipment and successfully deployed STM-1 transmission equipment during field t rial covering a live ring network. HOBBIES Trekking, Music, Understanding COSMOS.
OBJECTIVE Seeking Internship/Full-time position as a Software Network Engineer EDUCATION San Jose State University, San Jose, CA M.S. Electrical Engineering, May, 2011 Concentration in Networking/Network Application Programming GPA: -3.6/4.0 B.S. Electronics & Communication Engineering India, Aug-September 2001, CGPA: -70
SKILL-SETS Programming Languages: C, C++ Scripting Language: TCL/TK, Python, Shell scripting Networking Protocols: DSL, SDH/SONET, Ethernet, ATM, TCP, UDP, BGP, RIP, OSPF, M PLS, PPP, VLAN, RTP, RTSP, SCTP, VOIP, SIP, H.323, PIM-SM/DM, CBT, MOSPF, SS7, Q oS Web Technologies: HTML, XML, JavaScript, AJAX and PHP Equipments Handled: IXIA, SMB- 2000, AX4000, SDH Analyzer- ANT20SE, Network Ana lyzer 8720-C, Communication Signal Analyzer, ADSL/VDSL Noise generator (NSA 400) , ADSL/VDSL Wireline Simulator (DLS8100/6800/90) Platform worked: Solaris/Linux/Windows/VxWorks Strong communication and writing skills in English. ACADEMIC Following are the academic projects completed during MS Course work:PROJECTS * Currently doing my Master's Project/Thesis on "Performance Analysis o f Multicast Traffic over a MPLS network". The whole project is being implemented and simulated on Net work-Simulation-2 model using C++ and OTcl languages on Linux platform. * The project proposes and implements a new multicasting algorithm in order to c onstruct a shared and source-specific multicast LSP trees over a MPLS Network. * The project further implements dense/sparse mode version of Multicast Routing Protocols (CBT/PIM-DM) using the proposed algorithm over a MPLS network. * Performance analysis pertaining to various multicast transmission parameters b etween CBT/PIM-DM is then compared on different multicast traffic models. * Completed a course term project in "H.264 video streaming using RTP protocol". Following were the features associated with the project. * Implemented an interactive client and server distributed application to facili tate H.264 video streaming over internet using RTP protocol over UDP sockets. * Enhanced the server capability by designing a multithreaded concurrent UDP ser ver, in order to support concurrent access from multiple clients. * Evaluated packet loss, delay analysis and its impact on video quality on H.264 video encoding technique. * Implemented the whole project using socket programming and posix based pthread concepts for concurrency design using C language on Linux platform (Ubuntu). * Completed successfully the following simulation term projects in other network
ing courses:* Evaluated various "SIP features and extensions for Voice over IP (VOIP) applic ations". A prototype SIP based client and proxy server components were configure d. Network traces of SIP packets pertaining to various features and extensions w ere analyzed in detail over a live LAN network. * Implemented various "packets queuing mechanism associated with QoS" in a typic al network. The project focused on realizing various series/parallel queuing M/M /1 modules and further analyzing average packet delay on each model using discre te event simulator OMNET++ tool. * Created a "Web based Cross/Inter-domain Chat protocol" design project. AJAX wa s used to design the front end client interface and PHP was used to design backe nd server using MySql Database interface.
WORK * Ikanos Communication Inc, Red Bank, New Jersey, USA EXPERIENCE Product Application Engineer Intern [Broadband Application Group] 5/2010 - 8/2010 Alcatel DSLAM Project * Contributed towards resolving various field issues pertaining to API Interface Layer reported during the integration testing phase covering layer 1 and 2 feat ures. * Contributed in setting up an ATM Bonding traffic test bed setup for system tes t team using implicit tagging VLAN rules. * Conexant System Inc, Noida, India Lead Engineer [Broadband Access Group] 1/2008- 7/2009 VDSL 2/2+ Accelity2/2+ Chipset Development Project
*Lead a team of three in designing API Interface layer software for VDSL2/2+ wit h reference to ITU-T standards G993.1/2 for Conexant Owned VDSL PHY CO chipsets for Alcatel's Line Termination Card covering 4/5 bands VDSL2/2+ spectrum and lin e bonding features. *Participated in board bring up activity of the Alcatel's Line termination card (Central Office Side) integrated on Conexant VDSL PHY Chipset. This whole projec t was a part of AT&T U-Verse Project in North America. *Implemented all the features associated with this project using C language on U nix/VxWorks platform. 6/2007 - 12/2007 ADSL 2 /ADSL 2+ MAXTANE/OCTANE Chipset Development Project * Contributed in remodeling automated test tools based on TR-067, WT-100 Inter O perability Test bench apropos to the validation of Conexant owned CPE/CO PHY Chi psets for ADSL/ADSL2+ standards. This project was a group project consisting of three members.
*Analyzed various noises impairment models (ADSL2/ADSL2+ specific) that affe ct the performance of physical DSL layer. Later incorporated these noise models in the test tools developed for validating chipsets based on ADSL/ADSL2+ standar ds for the production test cycle. *Developed the above test tools using C/TCL language on Windows platform. \
* Alcatel-Lucent Networks, Ottawa, Canada Software Engineer [Onsite Position from Wipro technologies] 2/2006 - 4/2007 Hybrid Network Termination Card (HYNT) Development Project * Developed prototype system and application software for a new Hybrid Network T ermination Card during my on-site assignment at Alcatel-Lucent Canada comprising of a team of three engineers: * Contributed in the board bring up activity by modifying the existing software modules to suit the intended requirement of the hardware system during various i nitializations phases. * Integrated new equipment domain functionality in the existing management softw are for the above system. * Solved various fault reports covering Layer-2/3 features, reported during fiel d integration and product testing of the above Hybrid Network Termination (HYNT) card. * Implemented the features using C/C++ language and on Solaris/Vxworks platform. * Won 'Excellence award' in recognitions for timely completion, solving various fault reports and handling intricate maneuvers pertaining to the lifecycle of th is project. * Wipro Technologies, Bangalore, India Project Engineer [Telecom and Software Systems, Alcatel-Lucent Internetwo rking Division] Involved in the design and development of Layer2/3 network software stacks and a ssociated features for Intelligent Service Access Multiplexer (ISAM) an IP DSLAM project of Alcatel-Lucent Networks throughout my tenure at Wipro Technologies. 10/2005 - 2/2006 IGMP based Feature Enhancement * Designed features for dynamic retrieval of real time channel state for differe nt multicast groups via SNMP or via CLI. This development was a new addition in the existing IGMP application for ISAM. This project was a group project consist ing of five members. * Coded the features using C/C++ language on Solaris/Vxworks platform. 4/2005 - 2/2006 Impulse Noise Protection Mechanisms * Lead a team of two engineers in designing new Proxy code and automation of tes t scripts to support testing of Impulse Noise Protection mechanism with referenc e to ITU-T G.992.3 standard for ADSL2 based line termination card with Broadcom PHY Chipsets. Solved various fault reports generated during testing and field in tegration. * Implemented the features using C language on Solaris/Vxworks platform. * Won 'Feather in my Cap' in recognitions of my work and for timely completion,
solving various fault reported during field testing and effectively mentoring th e team pertaining to this project. 10/2004 - 4/2005 Virtual Routing and Forwarding Feature *Developed various SNMP based interfaces for Virtual routing and Forwarding and VLAN features for the main network termination card. This project was a group pr oject consisting of four engineers and was awarded 'Thanks a Zillion' honor.' *Implemented the features using XML/C language on Solaris/Vxworks platform.
* VXL Technologies, Faridabad, India Telecom Engineer [Information & Communication Division] 5/2004 - 10/2004 Ethernet Router Development Project * Generated test plan for the L2-L3 protocols like PPPoA, PPPoE, IPoA & EoA Rout ing functionality like RIP, NAT and DNS; as well as DHCP applications for ADSL E thernet Router and USB Modem based on ITU-T standards G.992.1 (G.DMT) and G.992. 2 (G.Lite). This project was a group project consisting of five engineers. * Implemented the test cases using TCL scripting language and on Windows platfor m. 6/2002 - 5/2004 Synchronous Transfer Mode (STM-1, Optical Interface) Developm ent Project *Developed various features, test plans and test cases as per guideline of ITU-T Recommendations G.957, G.958, G.703, G.784 and TEC GR and carried out test exec ution successfully for indigenous SDH transmission equipment in a group three me mbers. * Generated the test cases using TCL scripting language and on UNIX platform. *Played a key role in conducting Telecommunication Engineering Center (Governme nt of India) approval and Product Quality Test Certificate of STM-1 transmission equipment and successfully deployed STM-1 transmission equipment during field t rial covering a live ring network. HOBBIES Trekking, Music, Understanding COSMOS.
