Stirling engine

Published on November 2016 | Categories: Documents | Downloads: 44 | Comments: 0 | Views: 361
of 1
Download PDF   Embed   Report

1kw stirling engine for household use

Comments

Content


The Stirling rise
Technical Scheme GENOA01
Exchanger and heat sink:
Regenerator:
Engine block and crankcase:
Connecting Rods:
Crankshaft:
Pistons:
Stainless steel AISI 316
Network stainless steel AISI 310
Aluminum
Aluminum
Steel bar hardened and ground
Aluminum covered with molybdenum
Materials used:
CC:
Working gas:
Overpressure:
Operating temperature:
Starting temperature:
Revolutions per minute:
Lubrication:
Cooling:
Maintenance:
Dimensions (aaprox.):
Weight (approx.):
522
air (nitrogen)
up to 30 bar
(hot side) 750 °C
(hot side) 520°C
(under load) 600
not required
water
inspection every 1000 hours / work
716 mm x 770 mm x 240 mm
120 kg
Key Features:
Electric power (DC) to 1 kW (with permanent magnet generator or equivalent
It can work for 24 hours / 7 days continuously)
Genoastirling S.r.l. Corso Buenos Aires 75 – 20124 Milano - P. Iva e C.F. 06780080963
Cap. soc. € 10.000,00 i.v. - Tel: 02/26306344 Fax: 02/26306780 e mail [email protected]
Performance:
Single cylinder, Alpha Stirling engine type

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close