TMT Publications
Content
Recent TGP Publications
University of Colorado, Boulder
“Fabrication and Testing of an ALD TiO2 Coated Flat Polymer Micro Heat Pipe,”
C. Oshman, B. Shi, A. Abdulagatov, S. George, R.G. Yang, Y.C. Lee, V.M. Bright
and C. Li, 15th International Heat Pipe Conference (15th IHPC), Clemson, USA,
April 25-30, 2010.
“The Development of Polymer-Based Flat Heat Pipes,” C. Oshman, B. shi, C. Li,
R. Yang, Y.C. Lee, G. P. Peterson and V. M. Bright, J. of MEMS, Vol. 20, No. 2,
April 2011, pp. 410-417.
UCLA
Ladan Amouzegar, Sean W. Reilly, and Ivan Catton, “Investigating the
Performance of Bi-Porous Disk-Shaped Wick With the Restricted Vapor Space by
Developing an Electric Analogue Method,” ASME Conf. Proc. 2011, T10229
(2011)
G.S. Hwang, Y. Nam, E. Fleming, P. Dussinger, Y.S. Ju, M. Kaviany, “Multi-artery
heat pipe spreader: Experiment,” International Journal of Heat and Mass
Transfer 53 (2010) 2662–2669
Nam, Y.S.; Sharratt, S.; Ju, Y.S.; , "Nanostructured c-post wicks for advanced
heat pipes," Micro Electro Mechanical Systems (MEMS), 2011 IEEE 24th
International Conference on , vol., no., pp.1313-1316, 23-27 Jan. 2011
Approved for Public Release, Distribution Unlimited
Recent MACE Publications
UTRC
Hidalgo, P., and Glezer, A., “Active Flow Enhancement for Heat Ejection in a
Diverging Channel,” 62nd Annual Meeting of the APS Division of Fluid Dynamics
Minneapolis, Minnesota, November, 2009.
Approved for Public Release, Distribution Unlimited
Recent NTI Publications
Georgia Tech
Andrew McNamara, Vivek Sahu, Yogendra Joshi, and Zhuomin Zhang, “Infrared
Imaging Microscope as an Effective Tool for Measuring Thermal Resistance of
Emerging Interface Materials,” ASME Conf. Proc. 2011, T30026 (2011)
Approved for Public Release, Distribution Unlimited
University of Colorado, Boulder
“Fabrication and Testing of an ALD TiO2 Coated Flat Polymer Micro Heat Pipe,”
C. Oshman, B. Shi, A. Abdulagatov, S. George, R.G. Yang, Y.C. Lee, V.M. Bright
and C. Li, 15th International Heat Pipe Conference (15th IHPC), Clemson, USA,
April 25-30, 2010.
“The Development of Polymer-Based Flat Heat Pipes,” C. Oshman, B. shi, C. Li,
R. Yang, Y.C. Lee, G. P. Peterson and V. M. Bright, J. of MEMS, Vol. 20, No. 2,
April 2011, pp. 410-417.
UCLA
Ladan Amouzegar, Sean W. Reilly, and Ivan Catton, “Investigating the
Performance of Bi-Porous Disk-Shaped Wick With the Restricted Vapor Space by
Developing an Electric Analogue Method,” ASME Conf. Proc. 2011, T10229
(2011)
G.S. Hwang, Y. Nam, E. Fleming, P. Dussinger, Y.S. Ju, M. Kaviany, “Multi-artery
heat pipe spreader: Experiment,” International Journal of Heat and Mass
Transfer 53 (2010) 2662–2669
Nam, Y.S.; Sharratt, S.; Ju, Y.S.; , "Nanostructured c-post wicks for advanced
heat pipes," Micro Electro Mechanical Systems (MEMS), 2011 IEEE 24th
International Conference on , vol., no., pp.1313-1316, 23-27 Jan. 2011
Approved for Public Release, Distribution Unlimited
Recent MACE Publications
UTRC
Hidalgo, P., and Glezer, A., “Active Flow Enhancement for Heat Ejection in a
Diverging Channel,” 62nd Annual Meeting of the APS Division of Fluid Dynamics
Minneapolis, Minnesota, November, 2009.
Approved for Public Release, Distribution Unlimited
Recent NTI Publications
Georgia Tech
Andrew McNamara, Vivek Sahu, Yogendra Joshi, and Zhuomin Zhang, “Infrared
Imaging Microscope as an Effective Tool for Measuring Thermal Resistance of
Emerging Interface Materials,” ASME Conf. Proc. 2011, T30026 (2011)
Approved for Public Release, Distribution Unlimited
