Truck Trailer.book

Published on December 2016 | Categories: Documents | Downloads: 48 | Comments: 0 | Views: 136
of 28
Download PDF   Embed   Report

Comments

Content


Truck & Trailer Components
Truck & Trailer Components
THE DESIGN ADVANTAGE
A wholly owned Australian Company
Catalogue 101 October 2006
© Mackay Consolidated Industries Pty Ltd 2007 1 www.mackayrubber.com.au

Truck & Trailer components
Introduction
It is our pleasure to introduce our No 101 Truck & Trailer Catalogue.
Considerable care has been taken in arranging the publication in order to keep it simple to follow, thus permitting
quick and easy reference to any item.
Every endeavour has been made to ensure that the information given in this catalogue is complied from reliable
sources and is accurate. If any inaccuracies are present these are regretted.
Mackay reserves the right to alter the design, detail or specification of any of the products described in this
catalogue with out notice.
Our range of parts will be added to at frequent intervals as we endeavour to maintain an extensive range of
replacements and accessories for the Truck and Trailer Industry. OEM part numbers and models are used for reference
purposes only.
COPYRIGHT PROTECTION
This publication, including the Mackay Part Numbering System is protected by copyright.
It may not be copied in part or whole without the written consent of Mackay Consolidated Industries Pty. Ltd.
© Mackay Consolidated Industries Pty Ltd 2007 2 www.mackayrubber.com.au

Truck & Trailer components
Contents
Bonnet Clamp............................................................................................... 18
Corner Safety Pads ....................................................................................... 23
Dock Fending Rubber ................................................................................... 23
Flexi-Straps.................................................................................................. 18
Stock Extrusions
Bracket Straps ...................................................................................... 19
Tank Straps .......................................................................................... 19
Door seal P section................................................................................ 19
Glazing Rubber ..................................................................................... 20
Door Seals E Section.............................................................................. 20
EPDM Rubber Sponge Strip ..................................................................... 21
EPDM Rubber Sponge Cord...................................................................... 21
EPDM Rubber Sponge Bull Nose Strip....................................................... 21
EPDM Rubber Sponge Bulb Strip.............................................................. 21
EPDM Rubber Sponge Single Pyramid....................................................... 22
EPDM Rubber Sponge U Channel Strip...................................................... 22
EPDM Rubber Sponge with Lip ................................................................ 22
EPDM Rubber Sponge Arrow Head Strip.................................................... 22
EPDM Rubber Sponge Cone Strip ............................................................. 22
EPDM Rubber Sponge Double Pyramid Strip .............................................. 22
EPDM Rubber Sponge V Section Strip....................................................... 22
EPDM Rubber Sponge 1/4 Round Strip..................................................... 22
EPDM Rubber Sponge Cone Strip ............................................................. 22
Torque Rods and Bushings
Suspension Identification ...................................................................... 3
Varilength Torque Rods.......................................................................... 8
Bushings - Torque Rods ......................................................................... 9-12
Varilength Torque rod and forging .......................................................... 13-14
Trailer Suspension
Trailer Bushings- torque /Radius Rod ...................................................... 15-16
Turntable Bushings ............................................................................... 16
Equalizer Bushing ................................................................................. 17
Truck Beam & Rocker Bushings
Walking beam....................................................................................... 6
4 Spring Suspension.............................................................................. 7
Sling Protector ............................................................................................. 22
Rubber Wheel Chocks ................................................................................... 23
Universal Hoses
Hose Bends .......................................................................................... 24
Straight Hose ....................................................................................... 25
Heater Hose ......................................................................................... 25
Fuel Hose............................................................................................. 26
Emission Control, Fuel vapour & vacuum Hose.......................................... 26
MackayFlex .......................................................................................... 27
Walking Beam Suspension
. Hendrickson
. International Harvester
Camel Back Suspension
. Mac
Six Rod Suspension
. Kenworth . Rockwell . Japanese
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 3 www.mackayrubber.com.au

Truck Beam & Rocker Bushings
Suspension Identification
© Mackay Consolidated Industries Pty Ltd 2007 4 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Truck Beam & Rocker Bushings
Equaliser (Rocker) - Walking Beam
Walking Beam Suspension Parts
Replacing 1. Hendrickson
2. International Harvester
Walking Beam Suspension Part Numbers
A K T E 3 8
A = Adapter Kit
K = Kit (including other parts)
TRUCK and or trailer component
(somtimes omitted for individual
components)
e.g AK34 or AK38 for Adaptor Kits
E = End Bush
C = Centre Bush
T = Cross Tube
Suspension Capacity
34 = 34000 LB capacity
38 = 38000 LB Capacity
44 = 44000 LB capacity
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 5 www.mackayrubber.com.au

Truck Beam & Rocker Bushings
Equaliser (Rocker) Sec - 4 Spring Suspension
Four Spring Suspension Parts
Replacing 1. Hendrickson E4- 340/380
2. International Harvester
Part Numbers - Bushing Designation - Truck & Trailer
T S M K 1 8 A
Truck and or Trailer
Type of Mounting
P = Pin Type (ie Hollow inner sleeve shackle
bush type design or taper hole type)
S = Straddle pin type ( radial parallel Holes)
T = Taper pin type ( side mounting)
U = U-Bolt or cotter key mount (straddle pin
without holes but may have flats.
Suffix letter indicating variation of basic
part
Sequential number recorded in a Mackay
part number register
K = Kit including other part or multiple set
of parts
Basic Design Concept
H = Hendrickson type
M = Mack Type
R = Rockwell type
L = Leyland type
J = Japanese type
K = Kenworth type
Note: This applies to design concept as recognised by
Mackay, and not necessarily customer or true
designer.
Equaliser (Rocker) - Walking Beam
Part No Description
TE34 Hendrickson End Bush
RT/RTE 340
64mm I.D, 111mm O.D 134mm O/A Length
Replaces :-
Hendrickson BA6969
I.H.C 124865R91
Colrain SP1148
Ford 82DB5873AA
AK34 Beam End Adaptor Kit
Hendrickson 340 - 1” Bolt
Replaces :-
Hendrickson 15000-13
I.H.C 3254309R91
Colrain SP7531
TE38 Hendrickson End Bush
380/440
64mm I.D, 111mm O.D. 146mm O/A Length.
Replaces:-
Hendrickson BA6572
I.H.C 124892R91
Colrain SP1144
Ford B8QH5873A
and LB5873A
AK38 Beam End Adaptor Kit
Hendrickson 380 - 1” Bolt
Replaces:-
Hendrickson 45000-7
and I.H.C 537372C91
© Mackay Consolidated Industries Pty Ltd 2007 6 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Truck Beam & Rocker Bushings
Equaliser (Rocker) Sec - 4 Spring Suspension
Part No Description
TPH30 E4-340/380
Bushing - Rocker Centre
26.2mm I.D, 65mm O.D 117.5 O/A Length
Replaces :-
Hendrickson 47420
Ford E4HZ5872A
TPH31 E4-340/380
Bushing - Rocker End
22.2mm I.D, 60.4mm O.D 79mm O/A Length
Replaces :-
Hendrickson 47421
Ford E4HZ5873A
TPH42 Bushing - Torque Rod
(Through Bolt Type)
(No Outer Sleeve)
22.2 I.D, 52mm O.D. 76mm O/A Length.
Replaces:-
Hendrickson 47692
TSH41 Bushing - torque Rod
(Straddle PIN type)
(No Outer Sleeve)
52mm O.S, 111mm Hole centres. 17mm Holes
Replaces:-
Hendrickson 47691

All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 7 www.mackayrubber.com.au

Truck Beam & Rocker Bushings
© Mackay Consolidated Industries Pty Ltd 2007 8 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Torque Rods and Bushings

Varilength Torque rods
Part No Description
VRTTM19 Varilength Rod and TTM19
Bushing assembly
C = 353mm
D = 102mm
Suits:- Mack Camel Back Suspension
VRTSM18/0 Varilength Rod and TSM18
Bushing assembly
A & B = 0
0
C = 353mm
D = 102mm
Suits:- . Hendrickson Walking Beam
Suspension
. International Havester Walking Beam
Suspension
. Mack Camel Back Suspension
VRTSM20/0 Varilength Rod and TSM24 Bushing assembly
A & B = 0
0
C = 353mm
D = 102mm
Suits: - . Hendrickson Walking Beam Suspension.
. International Havester Walking Beam
Suspension.
Note: TSM24 replaces TSM20.
D
Eye Dia C
Half Rod
Length
C
Half Rod
Length
Eye Dia
D
A
B
A or B
Installation
Angle of Pin in Rod
C
Half Rod
Length
Eye Dia
D
A
B
A or B
Installation
Angle of Pin in Rod
NOTE !
As torque rods are a critical safety related item, it is important where customers make up their own rods
that all rods are welded correctly and weld tested according to current standards. Mackay Consolidated
Industries Pty Limited will not be liable or accept any responsibility for any consequences attributable to
failed torque rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or
used in an application not specified by Mackay Consolidated Industries Pty Limited.
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 9 www.mackayrubber.com.au

Torque Rods and Bushings
Bushings - Torque Rod
Part No Description
Equidistant Pin
D
C
B
A
TSM18 Bushing - Torque Rod
A = 76mm
B = 111mm
C = 17mm
D = 28.5mm
Suits:-
. Hendrickson Walking Beam Suspension
. International Harvester Walking Beam
Suspension Replaces :- 3212882R2
. Mack Camel Back Suspension
Equidistant Pin
C
B
A
D
TSM24

(Replaces TSM20)
Bushing - Torque Rod
A = 76mm
B = 111mm
C = 23mm
D = 28.5mm
Suits:- . International Harvester Walking Beam
Suspension
Equidistant Pin
C
B
A
D
TSR28 Bushing - Torque Rod
A = 76mm
B = 111mm
C = 19.8mm
D = 28.5mm
Suits:- . Rockwell Light Weight Six Rod
Suspension
A
B
C
TPH1
as used with
International
Harvester Walking
Beam Suspensions
Bushing - Torque Rod
A = 76mm
B = 82.5mm
C = 28.5mm

Replaces:- I.H.C 322069C91 and 3255879R1
A
B
C
TPH17
as used with
International
Harvester Walking
Beam Suspensions
Bushing - Torque Rod
A = 73mm
B = 82.5mm
C = 28.5mm

Replaces:- I.H.C 124729R92
A
B
C
TPH17S Bushing - Torque Rod
A = 73mm
B = 82.5mm
C = 20.25mm
A
B
C
© Mackay Consolidated Industries Pty Ltd 2007 10 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Torque Rods and Bushings
Bushings - Torque Rod
TPH21
as used with
International
Harvester Walking
Beam Suspensions
Bushing - Torque Rod
A = 76mm
B = 57mm
C = 26mm

Replaces:- I.H.C 3254876R1
A
B
C
D
Offset Pin
TSH2
as used with
International
Harvester Walking
Beam Suspensions
Bushing - Torque Rod
A = 76mm
B = 144mm
C = 19.8mm
D = 28.5mm

Replaces:- I.H.C 438506C1 & 3255880R1
Part No Description
C
D
B
A
FailSafe Washer
TTM8 Bushing - Torque Rod
(340 Type Taper)
A = 76mm
B = 54mm
C = 33.5mm
D = 1.12 x12 UNF
Suits:-
. Hendrickson Walking Beam Suspension
. International Harvester Walking Beam
Suspension Replaces
C
D
B
A
FailSafe Washer
TTM9 Bushing - Torque Rod
(380 type Taper )
A = 76mm
B = 82.5mm
C = 35.3mm
D = 1.25 x 12 UNF
Suits:-
. Hendrickson Walking Beam Suspension
C
D
B
A
FailSafe Washer
TTM19 Bushing - Torque Rod
(Mack Type Taper )
A = 76mm
B = 59mm
C = 38.5mm
D = 1.25 x 12 UNF
Suits:- Mack Camel Back Suspension
A
C
D
B
Equidistant Pin
TSH32 Bushing - Torque Rod
(Equidistant Straddle Type)
A = 70mm
B = 111mm
C = 17mm
D = 28.5mm
Replaces:- Hendrickson 44695
Part No Description
A
D
B
Equidistant Pin
C
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 11 www.mackayrubber.com.au

Torque Rods and Bushings
Bushings - Torque Rod - 105mm (4
1
/
8
”) DIA
TSH32A Bushing - Torque Rod
(Equidistant Straddle Type)
A = 70mm
B = 111mm
C = 19mm
D = 28.5mm
C
D
B
A
FailSafe Washer
TTH33 Bushing - Torque Rod
(380 Series Taper)
A = 70 mm
B = 82.5mm
C = 35.3mm
D = 1.25 x 12UNF
Replaces:- Hendrickson 44697
A
C
B
TPH36 Bushing - Torque Rod
(Through bolt type)
A = 70mm
B = 82.5mm
C = 28.5mm
Replaces:- Hendrickson 46736
Part No Description
C
B
D
A
TSR6 Bushing - Torque Rod
A = 105mm
B = 136mm
C = 26mm
D = 35mm
Replaces:-
. Rockwell A2297-X-3664
C
B
D
A
TSK10 Bushing - Torque Rod
A = 105mm
B = 111mm
C = 19.8mm
D = 32mm
Replaces:-
. Kenworth K066C259
. Rockwell A2297-R-18A
TSK10-75 Same as TSK10 but harder rubber
Replaces :-
. Denning 33B0741
Part No Description
C
B
A
D
© Mackay Consolidated Industries Pty Ltd 2007 12 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Torque Rods and Bushings
Bushings - Torque Rod - Various
TSR11 Bushing - Torque Rod
A = 105mm
B = 111mm
C = 17mm
D = 32mm
Replaces:-
Rockwell A2297-Q-17A
A2297-L-1052
A2297-P-3162
C
D
A
B
TSJ25 Bushing - Torque Rod
A = 105 mm
B = 110 mm
C = 18.8 mm
D = 31.5mm
Replaces:-
Hino 49305-1110
Isuzu 1515190412
Mitsubishi MC812666
Nissan 55542-Z-2001
C
Large end
of taper
Taper 1.5” per Foot
on DIA
(SAE 3501 STD)
A
B
TPL14 Bushing - Torque Rod
A = 105mm
B = 71mm
C = 50.7mm
Replaces:-
Denning 33B00659
Part No Description
A C
B
D
TSR26 Bushing - Torque Rod
A = 92mm
B = 111mm
C = 17mm
D = 32mm
Replaces:-
. Rockwell A2297-H-1048
D
B
A
C
TSR27 Bushing - Torque Rod
A = 92mm
B = 111mm
C = 19.8mm
D = 32mm
Replaces:-
. Rockwell
D
B
A
C
TSH29 Bushing - Torque Rod
A = 91mm
B = 111mm
C = 17mm
D = 28.5mm
Replaces:-
. Hendrickson BA32174
Part No Description
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 13 www.mackayrubber.com.au

Torque Rods and Bushings
NOTE !
As torque rods are a critical safety related item, it is important where customers make up their own rods that
all rods are welded correctly and weld tested according to current standards. Mackay Consolidated Industries
Pty Limited will not be liable or accept any responsibility for any consequences attributable to failed torque
rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or used in an
application not specified by Mackay Consolidated Industries Pty Limited.
Varilength - Torque Rod and Forging
Part No Description
Welded forging
and tube
M
a
x

L
e
n
g
t
h

(
A
)
(
C
e
n
t
r
e
s
)
OD
ID
VRFH81 Varilength Forging and Tube assembly
A (Max Length) = 710mm
I.D = 76mm
O.D = 102mm
Note:- Bushings to be ordered separately
Forging only
OD
ID
Forging only
OD
ID
FH81M Forging Only ( machined)
- For above assembly
I.D = 76mm
O.D = 102mm
Note:- Bushings to be ordered separately
60
36
3.2 wall
42
15
0
3
VRWT42 Weld Plug
42mm OD x 36mm ID x 60mm length
(for use with 42mm ID tube)
TU040-1M Steel Tube
To suit FH81M
42mm I.D 51mm O.D x 1 metre
(unmachined ends)
Welded forging
and tube
M
a
x

L
e
n
g
t
h

(
A
)
(
C
e
n
t
r
e
s
)
OD
ID
© Mackay Consolidated Industries Pty Ltd 2007 14 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Torque Rods and Bushings
VRFH146 Varilength Forging and Tube assembly
A (Max Length) = 862mm
I.D = 105mm
O.D = 134mm
Note:- Bushings to be ordered separately
OD
ID
Forging Only
FH146M Forging Only ( machined)
- For above assembly
I.D = 105mm
O.D = 134mm
Note:- Bushings to be ordered separately
TU068-1M Steel Tube
To suit FH146M
36 mm ID x 50mm OD x 1 metre
(unmachined ends)
2,0
36
51
3
15
0
25
34.7
VRWT35 Weld Plug
36 mm OD x 34.7mm ID x 51mm Length
(for use with 36mm ID tube)
Part No Description
NOTE !
As torque rods are a critical safety related item, it is important where customers make up their own rods that
all rods are welded correctly and weld tested according to current standards. Mackay Consolidated Industries
Pty Limited will not be liable or accept any responsibility for any consequences attributable to failed torque
rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or used in an
application not specified by Mackay Consolidated Industries Pty Limited.
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 15 www.mackayrubber.com.au

Trailer Suspensions
Trailer Bushings - Torque / Radius Rod
Part No Description
T301 Bushing - Radius Rod
55-45 mm O.D x 32mm I.D x 60mm Long
Suits Suspensions:
. Fruehauf F2,P2
. Freighter TAA49
. McGrath
. Colrain Roadking
. York
. Rubery Owen
Replaces:-
. Fruehauf UXA000011, ULA6295
. Freighter 161-07043
. McGrath 13B00133, N2603, N2469
. Colrain SP1301
. York 504823
. Rubery Owen311-147
T302 Bushing - Radius Rod
49mm O.D x 25mm ID x 76mm Long
Suits Suspensions:-
. Fruehauf S2
. Freighter TAA39
. Hutchens
. McGrath
Replaces:-
. Fruehauf UCA3754
. Freighter 161-07020
. Hutchens J7121
. McGrath J7121
T308 Bushing - Radius Rod
49mm O.D x 22.2mm I.D x 76mm Long
Suits Suspension:-
. Freighter
. International Harvester
. Dayton
. Rubery Owen M series
. Reyco 102
. Blair
. Dana-Webb
. Colrain Roadmaster
. BPW-Transpro
Replaces:-
. International Harvester 347374C1
. Dayton 39400016
. Rubery Owen M series 6425 &
21011745
. Reyco 102 09729-01
. Colrain Roadmaster SP1308
© Mackay Consolidated Industries Pty Ltd 2007 16 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Trailer Suspensions
Turntable Bushings
T304 Bushing - Radius Rod - Inner
60-50mm O.D x 45-37mm I.D x 27mm Long
Suits Suspension:-
. Freighter TAA35,Repalces 203-01314
T305 Bushing - Radius Rod - Outer
76-96mm O.D x 55-46mm ID x 24mm Long
Suits Suspension:-
Freighter TAA35, Replaces 203-01315
Part No Description
T604 Turntable Bush
(All Rubber)
71mm O.D x 28mm I.D x 108mm Long
Suits:- Holland 3500 & 3600 Turntables
Replaces :-
Holland 1604-5
Freighter 219-00070
Part No Description
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
© Mackay Consolidated Industries Pty Ltd 2007 17 www.mackayrubber.com.au

Trailer Bushings - Equalizer/Rocker
Part No Description
T101 Equalizer Bushing
89-68 mm O.D x 51mm I.D x 112mm Long
(3
1
/
2
x 2 x 4
3
/
8
”)
Suits Suspensions:
. Fruehauf P2, F2 Susps.
Replaces UXA0004
. Freighter Susps. Replaces 161-07043
. Rubery Owen ‘M’ Series (Late model)
Replaces 6422
. McGrath Susp replaces N2613
BONNET CLAMP
© Mackay Consolidated Pty Ltd 2007 18 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
A very strong and rugged bonnet and
hatch safety clamp specially designed
to secure against accidental opening.
Stoutly moulded in heavy duty black
rubber and is complete with
mounting plates.
A1177
WEIGHT 0.01 kg
60
35
122
ø5
ø4
• REINFORCED ENDS -hooks will not pull out
• QUICK ON/OFF HOOKS - eliminate rope tying
• PLASTIC COATED HOOKS - will not mark paintwork
• NON-STAINING , LONG LIFE RUBBER - weather resistant compound
PART No LENGTH mm STRETCH LENGTH mm WEIGHT kg
FHS9K 230 285 0.08
FHS15K 380 475 0.10
FHS24K 610 765 0.14
FHS31K 785 980 0.16
Add 100mm
for Hooks
For your protection , Mackay recommend that the use of "Flexi-straps"
DOES NOT EXCEED the specified stretch as listed.
Rubber Straps & Fasteners
FLEXI-STRAPS
PROTECTS YOUR LOAD -no flapping shifting or sagging
Stock Extrusions
© Mackay Consolidated Pty Ltd 2007 19 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres

Solid Extrusions
Bracket Straps
Anti-rattle and clamping strap applications
Part No. Width
MEBS25 25
MEBS50 50
MEBS52 52
MEBS75 75
Width
Tank Straps
Anti-rattle and clamping strap applications
Part No. Width
METS20 20
METS25 25
METS40 40
METS50 50
METS75 75
METS100 100
Width
Door Seal P Section
Dust and moisture sealing strip. Also suited to anti-rattle applications
Part No. STD Length A B C D
MEPS100 50 mtrs 38 14 24 14
MEPS104 50 mtrs 30 13 20 10
MEPS105 50 mtrs 35 13 22 13
MEPS107 50 mtrs 32 10 20 12
MEPS109 50 mtrs 30 20 14 16
A
B
D
C
Stock Extrusions
© Mackay Consolidated Pty Ltd 2007 20 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
Glazing Rubber Extrusions
For securing glass and plastic in sheet metal
Part No. STD Length
MEGR5 30 mtrs
MEGR8 30 mtrs
MEGR778 30 mtrs
MEGR1059 30 mtrs
MEGL2 30 mtrs
MERG5
1.5
8
6
MEGR8
5
1.5
7
MEGR778
MEGR1059
6
6
5
6
8
MEGL2
1.5
LOCK STRIP
Door Seals E Section
Dust and moisture sealing strip. Also suited to anti-rattle applications
Part No.
STD
Length
A B C
MEES5 50mtrs 9 12 1.5
MEES11 50mtrs 15 15 3
MEES12 50mtrs 13 13 3
MEES13 50mtrs 18 18 3
MEES15 50mtrs 19 22 2.5
MEES20 30mtrs 20 20 3
MEES25 30mtrs 50 45 6
A
B
C
Stock Extrusions
© Mackay Consolidated Pty Ltd 2007 21 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
EPDM Rubber Sponge Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE1010 10X10 A187 S186
MSE105 10X5 A36 S152
MSE106 10X6 A23 S141
MSE1111 11X11 A40 S154
MSE1210 12X10 A33 S150
MSE1212 12X12 A56 S512
MSE1310 13X10
MSE1313 13X13
MSE133 13X3 A42 S156
MSE135 3X5 A28 S146
MSE136 13X6 A10 S130
MSE1613 16X3 A63 S549
MSE1616 16X16 A62 S162
MSE1710 17X10 A43
MSE175 17x5 A11 S131
MSE1910 19x10 S157
MSE1913 19x13 A57 S550
MSE1919 19x19 A55 S400
MSE196 19X6 A64 S163
MSE203 20X3
MSE2213 22x13 A18 S136
MSE2222 22x22 A21 S139
MSE251.5 25x1.5 S166
MSE2510 25x10 A209 S321
MSE2513 25x13 A17 S135
MSE2519 25x19 A185 S529
MSE2525 25x25
MSE253 25x3 A66 S165
MSE255 25x5 A65 S164
MSE256 25x6 A77 S179
MSE3213 32x13
MSE3219 32x19
MSE3225 32x25 A72 S169
MSE323 32x3 A69 S167
MSE325 32x5 S325
MSE3813 38x13 A70 S168
MSE3819 38x19 S381
MSE3825 38x25 S382
MSE383 38x3 A51 S160
MSE385 38x5 A141 S526
MSE386 38x6 S602
MSE407 40X7
MSE5013 50X13 A59 S551
MSE5025 50x25
MSE503 50x3
MSE5030 50x30
MSE505 50x5
MSE506 50x6 S183
MSE6012 60x12
MSE607 60X7
MSE65 6x5 S544
MSE66 6x6
MSE7512 75x12
EPDM Rubber Sponge Cord
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSEC4.5 4.5mm S548
MSEC5 5mm
MSEC6 6mm S606
MSEC7.5 7.5mm
MSEC8 8mm S617
MSEC8.5 8.5mm
MSEC10 10mm A35 S151
MSEC12.7 12.7mm A19 S137
MSEC15 15mm
MSEC16 16mm
MSEC17 17mm
MSEC19 19mm S158
MSEC22 22mm
MSEC25 25mm A61 S161
EPDM Rubber Sponge Bull Nose
Strip
available in 30 metre lengths
Part No. Description
mm
MSE108MR 10x8
MSE256BNOSE 25X6
14
8
MSE108R
MSE256BNOSE
25
6
EPDM Rubber Sponge Bulb Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE118S 19x16 A118 S158
MSE127S 16x6 mm S127
MSE13S 12x8 mm A13
MSE5S 16x8 mm A5
6
16
5
16
19
MSE118S
Sponge Extrusions
Stock Extrusions
© Mackay Consolidated Pty Ltd 2007 22 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
EPDM Rubber Sponge
Single pyramid Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE145S 8x8x6mm A27
6
8
8
EPDM Rubber Sponge
Double Pyramid Strip
vailable in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE147S 22x14mm A29 S147
14
22
10
EPDM Rubber Sponge
U Channel Strip
vailable in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE155S 16x10x3 mm A41 S155
10
16
3
EPDM Rubber Sponge
V Section Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE715S 23x25x15 mm S315
25
23
15
EPDM Rubber Sponge With Lip
available in 30 metre lengths
Part No. A B C Dunlop Ormiston
MSE171S 16 6 10
MSE24S 12.5 6 10 A24
A
B
C
EPDM Rubber Sponge
1/4 Round Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE723S 16 x16mm A1 S123
MSE724S 16 x12mm A2 S124
MSE725S 12 x 12mm A3 S125
MSE726S 12 x 8mm A4 S126
EPDM Rubber Sponge
Arrow Head Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE173S 13X13mm A88 S173
13
13
EPDM Rubber Sponge
Cone Strip
available in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE31S A31 S148
20
16
EPDM Rubber Sponge Cone Strip
vailable in 30 metre lengths
Part No. Description Dunlop Ormiston
MSE26S 22x11mm A26 S126
22
11
DOCK - FENDERING RUBBER
A
C
B
Part No
A
mm
B
mm
C*
mm
Nominal
Wall
Thickness
mm
DR504003 50 40 300 10
DR504010 50 40 1000 10
DR756503 75 65 300 12
DR756510 75 65 1000 12
DR1059503 105 90 300 18
DR1059510 105 90 1000 18
* Also available in selected lengths
© Mackay Consolidated Pty Ltd 2007 23 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
SLING PROTECTOR
A
C
B
Part No
A
mm
B
mm
C
mm
D
mm
LENGTH
mm
MACSLEEVE 115 95.2 15 27 1090
D
Sling not included
A textile reinforced fully vulcanised high grade cut and
abrasion resistant rubber sling and goods protector.
Suits webbing up to 90mm wide
RUBBER WHEEL CHOCKS
A
C
B
Part No
A
mm
B*
mm
C
mm
Weight
Kg
WCS100 140 100 55 0.5
WCM150 155 150 155 2.2
WCL150 275 150 160 3.9
* Also available in selected widths
CORNER SAFETY PADS
Part No Description
Dimension
mm
Length
mm
CSP-P6510 Safety Yellow 70x70x20 1000
CSP-L95 Yellow reflective tape on
Black
95x95x20 900
Mackay Corner Safety Pads are an easily applied preventative solution
for OH&S concerns and damage problems.
UNIVERSAL HOSES
© Mackay Consolidated Pty Ltd 2007 24 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
Mackay Universal Hose Bends consists of tough rayon
reinforcing "knitted" into the rubber to ensure a good
quality , durable hose for automotive applications.
Hose Bends UHB8-300 to UHB57-300 are manufactured
from heat and ozone resistant EPDM to Spec. SAE 20R4
Class D-1 and are not suitable for the conveyance of
petroleum products.
For Fuel applications use part numbers UHB8-300N to
UHB57-300N which are manufactured from Fuel
resistant Nitrile.
WATER APPLICATIONS Only
PART No. INTERNAL LENGTH
DIAMETER A R
UHB8-300 8 300 50
UHB10-300 10 300 50
UHB13 13 105 50
UHB13-300 13 300 50
UHB16 16 105 50
UHB16-300 16 300 50
UHB19 19 105 50
UHB19-300 19 300 50
UHB25 25 105 50
UHB25-300 25 300 50
UHB31 31 120 60
UHB31-300 31 300 60
UHB38 38 120 60
UHB38-300 38 300 60
UHB44 44 140 70
UHB44-300 44 300 70
UHB50 50 140 70
UHB50-300 50 300 70
UHB57 57 170 85
UHB57-300 57 300 85
FUEL APPLICATIONS Only
Non Strocked Product
Made to customer order, MOQ Applies
PART No. INTERNAL LENGTH MOQ
DIAMETER A R
UHB8-300N 8 300 50 300
UHB10-300N 10 300 50 300
UHB13N 13 105 50 850
UHB13-300N 13 300 50 300
UHB16N 16 105 50 850
UHB16-300N 16 300 50 300
UHB19N 19 105 50 400
UHB19-300N 19 300 50 150
UHB25N 25 105 50 100
UHB25-300N 25 300 50 300
UHB31N 31 120 60 850
UHB31-300N 31 300 60 300
UHB38N 38 120 60 100
UHB38-300N 38 300 60 300
UHB44N 44 140 70 100
UHB44-300N 44 300 70 300
UHB50N 50 140 70 nil
UHB50-300N 50 300 70 nil
UHB57N 57 170 85 100
UHB57-300N 57 300 85 300
Outer cover formulated to provide good resistance to oil,heat,abrasion
and the effects of ozonets.
High grade tube compounded to
withstand coolant additives and
offers better resistance to
electrochemical degradation.
Tough Rayon or Kevlar lockstich knitting
for maximum burst pressure.
UNIVERSAL HOSE BENDS
A
R A
ø
UNIVERSAL HOSES
© Mackay Consolidated Pty Ltd 2007 25 www.mackaycon.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
Mackay General Purpose Straight Hose SHW19 to
SHW57 is manufactured from good quality heat, water
and ozone resistant EPDM with rayon knitted
reinforcement, that conforms to Spec. SAE J20R4 Class
D-1. Minimum burst pressure range - 0.62 to 1.03 MPa
depending on ID size. This hose is not suitable for
petroleum based fluids.
Sizes SHF51 to SHF57 are manufactured from nitrile
and meet Spec SAE30R6 and will withstand a working
temperature of 100 degrees C. and a pressure of
0.11MPa (16PSI). These hoses are suitable for fuel
applications only and are recommended for fuel filler
applications, they are not suitable for use as a coolant
hose.
PART No. I.D. LENGTH APPLICATION
SHW19 19mm 1000 mm
SHW22 22mm 1000 mm
SHW25 25mm 1000 mm
SHW28 28mm 1000 mm
SHW32 32mm 1000 mm
SHW35 35mm 1000 mm Water
SHW38 38mm 1000 mm
SHW41 41mm 1000 mm
SHW44 44mm 1000 mm
SHW48 48mm 1000 mm
SHW51 51mm 1000 mm
SHW54 54mm 1000 mm
SHW57 57mm 1000 mm
SHF51 51mm 1000 mm
SHF54 54mm 1000 mm Fuel
SHF57 57mm 1000 mm
STRAIGHT HOSE
HEATER HOSE
Mackay Heater Hose is manufactured from heat and ozone resistant EPDM meeting or exceeding
Spec.SAE 20R3 Class D-1. It is not suitable for petroleum based liquids.
INSIDE DIAMETER PART No. LENGTH PACK
8mm (5/16”) HH82 2 metres Card/Skin Pack
HH810 10 Metres Box
HH820 20 metres Box
HH850 50 metres Coil
HH8100 100 metres Coil
10mm (3/8”) HH102 2 metres Card/Skin Pack
HH1010 10Metres Box
HH1020 20 metres Box
HH1050 50 metres Coil
HH10100 100 metres Coil
12.7mm (1/2”) HH1272 2 metres Card/Skin Pack
HH12710 10 metres Box
HH12720 20 metres Box
HH12750 50 metres Coil
HH127100 100 metres Coil
15.9mm (5/8”) HH1592 2 metres Card/Skin Pack
HH15910 10 metrres Box
HH15920 20 metres Box
HH15950 50 metres Coil
17.5mm (11/16”) HH1752 2 metres Card/Skin Pack
HH17510 10 metrres Box
HH17520 20 metres Box
HH17550 50 metres Coil
19mm (3/4”) HH192 2 metres Card/Skin Pack
HH1910 10 metres Box
HH1920 20 metres Box
HH1950 50 metres Coil
50
&
100m
Coils
UNIVERSAL HOSES
© Mackay Consolidated Pty Ltd 2007 26 www.mackayrubber.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
FUEL HOSE
Mackay Fuel Hose is made from petroleum resistant nitrile wrap covered with HYPALON and is resistant to
ozone and heat. The rubber meets or exceeds Spec. SAE30 R6. This hose is suitable for use with leaded and
unleaded petrol , diesel fuel , lubricating oil and fuel vapour. It is not recommended for E.F.I.
EMISSION CONTROL, FUEL VAPOUR & VACUUM HOSE
Mackay EFV Hose is made from fuel resistant nitrile with HYPALON covering and is heat and ozone resistant.
ID PART No. LENGTH PACK
3mm EFV1003x2 2 metres Bag
(7/32”) EFV1003x8 8 metres Spool
EFV1003x20 20 metres Coil
4mm EFV1004x2 2 metres Bag
(5/32”) EFV1004x8 8 metres Spool
EFV1004x20 20 metres Coil
6mm EFV1006x2 2 metres Bag
(1/4”) EFV1006x8 8 metres Spool
EFV1006x20 20 metres Coil
ID PART No LENGTH PACK
BURST
PRESSURE
(MIN)
WORKING
PRESSURE
(MAX)
4mm FH1004x2 2 metres Card/Skin Pack 1720Kpa 340Kpa
(5/32”) FH1004x10 10 metres Box (250 PSI) (50 PSI)
FH1004x20 20 metres Box
FH1004x50 50 metres Coil
FH1004x100 100 metres Coil
5mm FH1005x2 2 metres Card/Skin Pack 1720Kpa 340Kpa
(3/16”) FH1005x10 10 metres Box (250 PSI) (50 PSI)
FH1005x20 20 metres Box
FH1005x50 50 metres Coil
FH1005x100 100 metres Coil
6mm FH1006x2 2 metres Card/Skin Pack 1720 Kpa 340 Kpa
(7/32”) FH1006x10 10 metres Box (250 PSI) (50 PSI)
FH1006x20 20 metres Box
FH1006x50 50 metres Coil
FH1006x100 100 metres Coil
8mm FH1008x2 2 metres Card/Skin Pack 1720 Kpa 340 Kpa
(5/16”) FH1008x10 10 metres Box (250 PSI) (50 Psi)
FH1008x20 20 metres Box
FH1008x50 50 metres Coil
FH1008x100 100 metres Coil
10mm FH1010x2 2 metres Card/Skin Pack 1200 Kpa 240Kpa
(3/8”) FH1010x10 10 metres Box (174 PSI) (35 PSI)
FH1010x20 20 metres Box
FH1010x50 50 metres Coil
FH1010x100 100 metres Coil
13mm FH1013x2 2 metres Card/Skin Pack 1200 Kpa 240 Kpa
(1/2”) FH1013x10 10 metres Box (174 PSI) (35 PSI)
FH1013x20 20 metres Box
FH1013x50 50 metres Coil
FH1013x100 100 metres Coil
UNIVERSAL HOSES
© Mackay Consolidated Pty Ltd 2007 27 www.mackaycon.com.au
All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres
MACKAYFLEX™ Single ID
MackayFlex # ID (mm) Length (mm)
25260F 25 260
25486F 25 486
30310F* 30 310
32375F* 32 375
32508F 32 508
32575F 32 575
35285F* 35 285
38350F* 38 350
38400F* 38 400
38438F* 38 438
38508F* 38 508
40350F* 40 350
44349F* 44 349
44393F 44 393
44444F* 44 444
44609F 44 609
45597F* 45 597
50576F* 50 576
51180F 51 180
51359F* 51 359
56221F 56 221
56530F* 56 530
56600F 56 600
57320F 57 320
57431F* 57 431
63482F* 63 482
MackayFlex ™
MACKAYFLEX™ Dual ID
MackayFlex # ID 1 (mm) ID 2 (mm) Length (mm)
3844560F* 38 44 560
4044260F 40 44 260
4044440F 40 44 440
5057576F 50 57 576
MackayFlex™ is a flexible water hose designed to suit
universal Automotive and Industrial applications.
MackayFlex™ hoses can bend and flex in almost any
direction and is an ideal replacement for unusual /
emergency applications or permanent use. Made from
quality EPDM rubber, with textile reinforcement and
galvanised inner spring construction.
Suitable for Water Applications
Working Temperature: -40 degrees C To +125
degrees C.
Burst Pressure: According to SAE30R5 standards
Part Number Identification system:
Eg. Single ID
25260F = 25mm ID X 260mm Length
Dual ID
3844560F = 38mm ID on one end,
44mm ID other end x 560mm Length.
Not suitable for oil,fuel or saltwater
applications
MACKAYFEX ™ Merchandiser MFM1
The MackayFlex ™ Hose Merchandiser helps you
easily display the top 18 MackayFlex ™ Hoses.
The Merchandiser includes a 18 hook rack (HR1),
Header board and the 18 most popular Mackayflex
hoses.
* Hoses included with Merchandiser (1 of each)

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close