upvc-swr-pipes.pdf

Published on September 2017 | Categories: Documents | Downloads: 43 | Comments: 0 | Views: 394
of 7
Download PDF   Embed   Report

Comments

Content

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

Reliability, Quality and Value.

FLOWTECH UPVC DRAINAGE SYSTEMS

Flowtech UPVC Drainage Systems offer a comprehensive range of pipes and fittings for Waste, Soil and Drainage applications to cater to the growing needs of the building construction industry.

Standards

Flowtech UPVC pipes and fittings are manufactured as per the following standards. - Above Ground : BS EN 1329-1 : 2000 - This standard supercedes BS 4514 : 1993 and BS 5255 : 1989.

1/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

- Below Ground : BS EN 1401-1 : 1998 - This standard supercedes BS 4660 : 1989 and BS 5481.

Kitemark Flowtech UPVC Drainage Fittings are available with the prestigious Kitemark license which is awarded by the British Standards Institute (BSI).

Advantages of Flowtech UPVC Drainage Systems Light Weight Chemical Resistance High Flow Rate Non-inflammable Non-Conductive Weather Resistance Easy Installation Corrosion Resistance Aesthetic Superiority

: : : : : : : :

:

Hence transport and handling is simple and con Excellent chemical resistance of UPVC to acids, al The smooth internal bore gives excellent flow prop UPVC does not support combustion and is self-ext UPVC is a non-conductor and hence not attacked Specially blended UV stabilized compound offers a Tough, impact-resistant and easy to install. UPVC is non-corrosive and hence constant contac UPVC is aesthetically far superior to conventional

Installation Procedures

- During installation, the pipeline should be adequately supported by providing pipe support brackets as per support distances shown in the chart.

2/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

Maximum Support Distances Pipe Size Vertical [in mtrs] Horizontal [in mtrs] 82 mm 110 mm 160 mm

2 2 2

0.9 1 1

- PVC pipelines expand or contract with change in temperature.  This thermal expansion and contraction should be allowed for in the design. - In case of a change in direction of the pipeline, support should be provided.

Solvent Cement Jointing

Rubber Ring Jointing

3/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

o o basis. of[Round Note: Drainage Standards Raw needed Appearance Colour Above Below Effective All The Sockets socket Genaral Mechanical Chemical and Flowtech More plastic 1000 Relevent Flowtech surface 100 No No Rubber -pipes solvents 90 This raw internal pipes Material Above Below 1 3” TIR detailed hrs leakage attack For years Ground pipe Ground the or <1/4” No days to (82mm), material Physical 5% are standard at UPVC applications rubber of < Length code proper are Resistance facilitate clock Drainage Ring > leakage 10% work (36mm), 60°C, pipe Ground and Ground > and 79 any at > manufactured that 1and 2 3 4 5 6 7 8 coloured supplied at 0.6 BS 1.3 BS Sr. 150 of Joint Pipes Drainage method] ring external 0.5 at 4” part CP used Physical design, can practice bar EN specific bar supercedes EN Properties 10 0 the 15 (110mm), :Systems :bar Long 1 312-3 socket. Elevated BS of be Mpa BS Vicat 1401-1 to 1329-1 and 1/2” is manufacturing as throughout Resistance cater mixed 100% Vicat EN architect's surface EN systems Systems Term follows: /information Fittings Properties (43mm) :in Resistance Softening building Longitudinal 1973. Thermal 1401-1 1329-1 4m offer :6” :Water Impact to of Temperature Softening BS Orange Grey Tensile UPVC with prEN Specific Poissons Performance (160mm) the Specific UPVC Flammability EN and of EN Characteristics 4514 4660 a are the UPVC are & to the approved regulations water. growing :oTightness complete :921 1989 1277 1055 Resistance 2” 6/5.8m Conductivity Temperature 1998 process. 2000 internal virging is wall manufactured :suitable to Brown Strength not pipes UPVC :Gravity (56mm) available Reversion Temperature Heat 1993 1989 DCM Ratio & isresistant as Cycling 8” self-extinguishing needs lengths. material, of are drawing follows: pressure range (200mm) Pipes and of to Acid should TPE pipes No smooth, be in[VST] BS of [ETC] to failure the used of seals as the > for aromatic are with be 5255 5481. pipes per British 45MN/Sq pipes sanitary building strictly clean with supplied C during 1040 necessary the C Requirement 160 :Min and 1989. and 1.41 are a 1:3 Standard following and and Value w/m number J/Kg/ followed. 79 fittings the systems cm construction supplied will with chlorinated free test at additives not plain 20 code for from of standards: period support EN shall with acids, Waste, ends. surface 743 ofindustry. /hydrocarbons. solvent form practice chemicals EN alkalies,salts EN combustion [Method Soil Testing 580 the 744 727 defects. cement and forB;Method Air]

ABOVEQC GROUND Lab UPVC DRAINAGE PIPES BS EN 1329 [Supercedes BS 5255 & BS 4514] Above Flowtech Mean Wall BELOW Ground Outside UPVC Thickness 43.1 42.8 3.5 3.0 Min 10 11 12 1GROUND 2 3 4 5 6 7 8 9 Sr. Pipes Drainage Dia [D1] : BS UPVC Pipes ENNominal 160 200 1329-1 DRAINAGE are 160 200 36 43 75 56110 82 mm 40 50 mm manufactured mm mm Max mm :Size [4"] [6"] [8"] [1¼"] [1½"] [2½"] 2000 [6"] [8"] [2"]BD [3"] PIPES DN B / OD as BS per EN the 1401 following 110.0 160.0 200.0 36.2 40.0 50.0 55.8 75.0 82.0 Min [Supercedes dimensions: BS 4660200.5 110.3 160.4 36.5 40.2 50.2 56.1 75.3 82.3 Max & BS 5481] Mean Wall Outside Thickness 160.0 160.4 4.6 4.0 Min 1 Sr. 2 3 4 5 Dia [D1] 160 200 160 200 Nominal mm 110 mm 160.4 Max [6"] [8"] mm [6"] [8"] Size SN SN [4"]DN 42UD U/ OD 110.0 3.2 160.0 200.0 Min 110.3 3.8 200.5 Max UPVC DRAINAGE SYSTEMS These drainage The range Standards UPVC Range 1 Advantages material. 1/4” - This system ABOVE BELOW Easy Technical Wide Option Maintenance of (36mm), Pipes Drainage fittings standard applications. installation range includes of and of GROUND GROUND both 1and to UPVC Pipes Systems 1/2” Fittings ofsuit supercedes free Installation specialised solvent both (43mm) any are Drainage and ::are BS offer the BS manufactured drainage long cement manufactured available EN EN Push &a BS back fittings 2” term comprehensive 1329-1 Systems 1401-1 4514 4660 (56mm) Fit and system up reliability. in &:push :Solvent sizes as :1989 1993 2000 1998 pipes as design. per fitper from and the fittings range Joint &the fittings BS following 11/4” following options of 5255 5481. pipes (36mm) are:dimensions: 1989. and also standards. and to is available fittings 8” available (200mm). for inwaste, with mUPVC a wide soil and

bove Ground Nominal Mean Wall 160 200 Pipes 160 200 36 43 75 110 56 82 Outside Thickness 200.0 mm 40.0 43.1 42.8 55.8 40 50 mm 3.5 3.0 mm mm Size Min mm : mm BS [6"] [8"] [1¼"] [1½"] [2½"] [6"] [8"] [2"] [3"] [4"] DN EN Dia BD B/1329-1 OD : 2000200.5 40.2 56.1 110.0 160.0 200.0 36.2 50.0 75.0 82.0 Max

3.0 110.3 160.4 200.5 4.9 36.5 50.2 75.3 82.3 Min

3.5 5.6 Max 3.0 3.2 4.0 3.9

Below Ground Nominal Mean 160 200 160 200 Wall Pipes mm 110 mm Outside Thickness 160.0 160.4 4.6 4.0 Size Min [6"] [8"] mm :[8"] [6"] BSSN2 SN4 [4"] SN2 DN EN Dia /UD 1401-1 U OD : 1998160.4 110.0 160.0 200.0 Max 110.3 3.2 200.5 Min 3.8 Max 3.2 3.9 4.9 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

36 43 75 110 160 200 56 82 "Y" 40 50 mm 40 50 36 25 43 56 DI mm Size D mm - 45 mm [1¼"] [1½"] [2½"] [2"] [3"] [4"] [8"]

o 200 110 160 -82 75

Female /28.5 27 31 26 Female -

48.5 45 51 60 61

36 43 75 110 160 200 56 82 "Y" 36.2 40 50 mm 160 200 40 50 36 25 43 56 DI mm Size D mm 45 mm [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"]

o56 200 160 40 50 43 110 75 82

Male / Female 28.5 27 31 26 60 61 110 75 82

48.5 45 51

o 200 75 110 160 200 82 "Y" mm 51 DI mm Size D mm - 45[2½"] [3"] [4"] [6"] [8"] 110 160 75 Female / Female Access 82 Opening 48.5 45 60 61 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

75 110 160 200 82 "Y" mm 110 51 DI mm Size D mm 45[2½"] [3"] [4"] [6"] [8"]

o 200 110 160 75 82

Male / Female Access 160 75 82 Opening

48.5 45 60 61

36 43 75 110 160 200 TEE 5650 82 40 mm 160 200 40 50 36 25 43 56 DI mm Size D mm -87.5 mm [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"]

o 110 -82 75

Female /30.5 31 27 60 61 Female -

48.5 45 51

o56 36 43 75 110 160 200 TEE 5636.2 82 40 50 mm 160 200 40 50 36 25 43 56 DI mm Size D mm 87.5 mm [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"] 160 200 40 50 43 110 75 82 Male / Female 28.5 27 31 26 60 61 110 75 82 48.5 45 51 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

75 110 160 200 TEE 82mm 51 DI mm Size D mm -87.5 [2½"] [3"] [4"] [6"] [8"]

o 200 110 160 75 82

Female / Female Access Opening

48.5 45 60 61

4/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

75 110 160 200 TEE 82mm DI mm Size D mm 87.5 [2½"] [3"] [4"] [6"] [8"]

o 200 110 160 75 82

Male / Female Access 110 160 200 75 Opening 82

48.5 45 51 60 61

o 110 BEND 36 43 75 110 160 200 5650 82 40 mm 160 200 40 50 36 25 43 56 DI mm Size D mm - mm 87.5 [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"] -82 75 Female /30.5 31 27 60 61 Female 48.5 45 51 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

BEND 36 43 75 110 160 200 5636.2 82 40 50 mm 160 200 40 50 36 25 43 56 DI mm Size D mm mm 87.5 [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"]

o56 200 160 40 50 43 110 75 82

Male / Female 28.5 27 31 26 60 61 110 75 82

48.5 45 51

BEND 75 110 82mm 51 DI mm Size D mm - 87.5 [2½"] [3"] [4"]

o 110 75 82

Female / Female Access Opening

48.5 45

o 110 BEND 75 110 82mm 110 51 DI mm Size D mm 87.5 [2½"] [3"] [4"] 75 82 Male / Female Access 75 Opening 82 48.5 45 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

36 43 75 110 160 200 BEND 5650 82 40 mm 160 200 40 50 36 25 43 56 DI mm Size D mm - mm 45 [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"]

o 110 -82 75

Female /28.5 27 31 26 60 61 Female -

36 43 75 110 160 200 BEND 5648.5 82 36.2 28.5 40 50 mm 160 200 40 50 31 36 25 43 26 56 45 51 60 61 DI mm Size D mm mm 45 [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"]

o56 200 160 40 50 43 110 75 82

Male / Female 27 110 75 82

48.5 45 51

COUPLER75 36 43 110 160 200 56 82 DOUBLE 36.2 28.5 48.5 40 50 mm 160 200 40 50 31 36 25 43 26 56 45 51 60 61 DI mm Size D mm mm [1¼"] [1½"] [2½"] [2"] [3"] [4"]SOCKET [6"] [8"] 160 200 40 50 43 56 110 75 82 27 110 75 82 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

LEVEL 160 INVERTER 110160 x51 DI Size xD110 75 mm 82 mm TAPER

ACCESS 36 43 75 110 160 200 56PLUG  82 36.2 40 50 mm DI mm Size D mm - mm [1¼"] [1½"] [2½"] [2"] [3"] [4"] [6"] [8"] & CAP

110 75 82

160 200 4050 43 56

110

48.5 45

110 -82 75

ACCESS 75 110 160 200 82 Solvent mm DI mm Size D mm[2½"] PIPE [3"] [4"] [6"] [8"] 110 160 200 75 82 40 43 48 58 61 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

BOSS PIPE 110 160 200 Female 110 61 DI Size D mm - mm[4"] / Female

[6"] [8"] -

160 200 51

-

5/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

BOSS PIPE 110 160 200 110 200 60 61 DI Size Male D mm mm[4"] / Female

110 [6"] [8"]

160 200 51

160

VENT 75 110 160 200 5650 82 mm 110 50 56 75 82 DI mm Size D mm -COWL mm [2½"] [2"] [3"] [4"] [6"] [8"] 160 200 -ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

43 110 160 200 56 REDUCER 110 82x36 xxxx75 50 43 75 56 110 160 56 82 mm 30.5 43.5 xmm 26 23 43 30 40 59 61 DI Size D mm mm -mm 40 50 mm [1½ BUSH [2 mm [4 [3 [4 [6 [8 xxxx1½"] x2½"] 1¼"] 2"] 2"] 3"] 4"] 6"]

110 200 3640 50 56

19 75 82

110 160 110 REDUCER xxx75 110 82 160 43 60 DI Size D mm mm mm[4 TEE [4 [6xxx2½"] 3"] 4"]

110 -

-

40

110 160 110 REDUCER xxx75 110 82 160 43 60 DI Size D mm mm mm[4 "Y" [4 [6xxx2½"] 3"] 4"]

110 -

-

40

PATCH 110 110xBOSS x43 5621 DI Size D mm mm ADAPTOR [4[4xx1½"] 2"] 56 43 31 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

Rubber UD 110200 160 200 "Y" 60 61 DI Size D mm Ring 45 [4"] [6"] [8"]

o 160 110 -

Female / Female -

40

Rubber UD 110 160 200 TEE 200 60 61 DI Size D mm Ring 87.5 [4"] [6"] [8"]

o 160 110 -

Female / Female -

40

o 160 UD Rubber 110 160 200 BEND 200 60 61 DI Size D mm Ring 87.5 [4"] [6"] [8"] 110 Female / Female 40 ABOVE GROUND UPVC DRAINAGE FITTING BS EN 1329 [Supercedes BS 5255 & BS 4514

Rubber UD 110 160 200 BEND 200 60 61 DI Size D mm Ring [4"] [6"] [8"] 45

o 160 110 -

Female / Female -

40

UD COUPLER Rubber 110200 160 200 60 61 DI Size Female D mm Ring [4"] / Female [6"] [8"]

110 160 -

-

40

Rubber UD 110 P-TRAP DI Size D mm Ring [4"]

110

110

85

6/7

UPVC SWR Drainage Pipes Written by Administrator Tuesday, 12 August 2008 14:00 - Last Updated Tuesday, 18 August 2009 13:40

110 160 110 Rubber REDUCER xxx75 110 82 160 43 60 DI Size D mm -mm mm Ring [4[4 Y [6xxx2½"] 3"] 4"]

110 -

-

40

7/7

Sponsor Documents

Recommended

No recommend documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close