VPN Setup Instructions Right

Published on June 2016 | Categories: Documents | Downloads: 54 | Comments: 0 | Views: 306
of 6
Download PDF   Embed   Report

Comments

Content

T
VPN SETUP INSTRUCTIONS
1. Press the Start button and click Control Panel. A new window will open up and then
click “View Network Status and Tasks” under “Network and Internet” as below.

2. Click “Setup a new Network Connection” as marked below

Page 1 of 6

T
3. Click “Connect to Workplace” as marked below

4. Now Click “Use my Internet Connection (VPN)” as marked below

Page 2 of 6

T
5. In next window, please add the following things as marked below:
a. Internet Address= 96.56.206.85
b. Description= “MY VPN” or whatever you want
c. Check the box “Don’t connect now, just set it up so I can connect later”
d. Then press “Next” button

Enter the username= [given to you in email]
Password= [given to you in email]
Check the box remember password. Then click “Create” button

Page 3 of 6

T
6. After this click Close. Then click Change Adapter Settings as shown below

7. Right click “MY VPN” and click Properties as shown below

Page 4 of 6

T
8. Click Networking tab, then select Internet Protocol Version 4 (TCP/IP) and press
Properties button

9. Click Advanced

Page 5 of 6

T
10. Uncheck the “Use default Gateway on Remote Network”. Press OK button.
Click OK and click OK again.

11. Right Click on “MY VPN” and click Connect

And you get a message that “MY VPN” is now connected.

CONGRATULATIONS!

Page 6 of 6

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close